New OS/os.c-cygwin from the maintainer.
[users/jgh/exim.git] / doc / doc-txt / ChangeLog
index eaec31c78f83253c7eedac00f304885797c1c364..496ba5943b9a92ac6a46b8253bbda4271aed7c65 100644 (file)
@@ -1,9 +1,96 @@
-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.76 2005/01/27 15:00:39 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.102 2005/03/29 11:01:32 ph10 Exp $
 
 Change log file for Exim from version 4.21
 -------------------------------------------
 
 
 
 Change log file for Exim from version 4.21
 -------------------------------------------
 
 
+Exim version 4.51
+-----------------
+
+TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
+      doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
+
+TK/02 Fix ACL "control" statement not being available in MIME ACL.
+
+TK/03 Fix ACL "regex" condition not being available in MIME ACL.
+
+PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
+      to test Sieve filters that use "vacation".
+
+PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
+      that changes the way the GnuTLS parameters are stored in the cache file.
+      The new format can be generated externally. For backward compatibility,
+      if the data in the cache doesn't make sense, Exim assumes it has read an
+      old-format file, and it generates new data and writes a new file. This
+      means that you can't go back to an older release without removing the
+      file.
+
+PH/03 A redirect router that has both "unseen" and "one_time" set does not
+      work if there are any delivery delays because "one_time" forces the
+      parent to be marked "delivered", so its unseen clone is never tried
+      again. For this reason, Exim now forbids the simultaneous setting of
+      these two options.
+
+PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
+      redirected to themselves ("homonym" addresses). Read the long ChangeLog
+      entry if you want to know the details. The fix, however, neglected to
+      consider the case when local delivery batching is involved. The test for
+      "previously delivered" was not happening when checking to see if an
+      address could be batched with a previous (undelivered) one; under
+      certain circumstances this could lead to multiple deliveries to the same
+      address. A one-line patch to add the appropriate test fixes the bug.
+
+PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
+      in its include files, and this causes problems building Exim.
+
+PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
+      header_syntax) but Exim was just ignoring anything given after a slash.
+      In particular, this caused confusion with an attempt to use "verify =
+      reverse_host_lookup/defer_ok". An error is now given when options are
+      supplied for verify items that do not have them. (Maybe reverse_host_
+      lookup should have a defer_ok option, but that's a different point.)
+
+PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
+      defined by RFC 821) to 2048, because there were problems with some AUTH
+      commands, and RFC 1869 says the size should be increased for extended
+      SMTP commands that take arguments.
+
+PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
+      Finch).
+
+PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
+      "unknown" error; now it says that the functionality isn't in the binary.
+
+PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
+      an address' error message when a string expansion fails (syntax or
+      whatever). Otherwise not only does the password appear in the log, it may
+      also be put in a bounce message.
+
+PH/11 Installed exipick version 20050225.0 from John Jetmore.
+
+PH/12 If the last host in a fallback_hosts list was multihomed, only the first
+      of its addresses was ever tried. (Bugzilla bug #2.)
+
+PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
+      the result incorrectly in the debug output. (It correctly added a newline
+      to what was transported.)
+
+TF/01 Added $received_time.
+
+PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
+      commented out examples of how to interface to a virus scanner and to
+      SpamAssassin. Also added commented examples of av_scanner and
+      spamd_address settings.
+
+PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
+      and controls are allowed in which ACLs. There were a couple of minor
+      errors. Some of the entries in the conditions table (which is a table of
+      where they are NOT allowed) were getting very unwieldy; rewrote them as a
+      negation of where the condition IS allowed.
+
+PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
+
+
 A note about Exim versions 4.44 and 4.50
 ----------------------------------------
 
 A note about Exim versions 4.44 and 4.50
 ----------------------------------------
 
@@ -361,6 +448,39 @@ Exim version 4.50
 76. Arrange for output from Perl's "warn" command to be written to Exim's main
     log by default. The user can override this with suitable Perl magic.
 
 76. Arrange for output from Perl's "warn" command to be written to Exim's main
     log by default. The user can override this with suitable Perl magic.
 
+77. The use of log_message on a "discard" ACL verb, which is supposed to add to
+    the log message when discard triggers, was not working for the DATA ACL or
+    for the non-SMTP ACL.
+
+78. Error message wording change in sieve.c.
+
+79. If smtp_accept_max_per_host was set, the number of connections could be
+    restricted to fewer than expected, because the daemon was trying to set up
+    a new connection before checking whether the processes handling previous
+    connections had finished. The check for completed processes is now done
+    earlier. On busy systems, this bug wouldn't be noticed because something
+    else would have woken the daemon, and it would have reaped the completed
+    process earlier.
+
+80. If a message was submitted locally by a user whose login name contained one
+    or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
+    It caused a spool format error. I have fixed the spool reading code. A
+    related problem was that the "from" clause in the Received: line became
+    illegal because of the space(s). It is now covered by ${quote_local_part.
+
+81. Included the latest eximstats from Steve (adds average sizes to HTML Top
+    tables).
+
+82. Updated OS/Makefile-AIX as per message from Mike Meredith.
+
+83. Patch from Sieve maintainer to fix unterminated string problem in
+    "vacation" handling.
+
+84. Some minor changes to the Linux configuration files to help with other
+    OS variants using glibc.
+
+85. One more patch for Sieve to update vacation handling to latest spec.
+
 
 ----------------------------------------------------
 See the note above about the 4.44 and 4.50 releases.
 
 ----------------------------------------------------
 See the note above about the 4.44 and 4.50 releases.