#! /usr/bin/perl -w
-# $Cambridge: exim/test/runtest,v 1.3 2006/02/09 14:50:58 ph10 Exp $
+# $Cambridge: exim/test/runtest,v 1.10 2006/04/28 13:46:36 ph10 Exp $
###############################################################################
# This is the controlling script for the "new" test suite for Exim. It should #
# Start by initializing some global variables
-$testversion = "4.61 (06-Feb-06)";
+$testversion = "4.62 (20-Apr-06)";
$cf = "bin/cf";
$cr = "\r";
$have_ipv4 = 1;
$have_ipv6 = 1;
+$have_largefiles = 0;
$test_start = 1;
$test_end = $test_top = 8999;
s/host\s\Q$parm_ipv6\E\s\[\Q$parm_ipv6\E\]/host ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6 [ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6]/;
s/\b\Q$parm_ipv4\E\b/ip4.ip4.ip4.ip4/g;
s/\b\Q$parm_ipv6\E\b/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
+ s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;
+ s/\b\Q$parm_ipv6r\E\b/ip6-reverse/g;
# ======== Test network IP addresses ========
s/\b\d+\.H\d+P\d+\b/dddddddddd.HddddddPddddd/;
# Maildirsize data
- if (/^\d+S,\d+C\s*$/)
+ while (/^\d+S,\d+C\s*$/)
{
- print MUNGED "dddS,dC\n";
+ print MUNGED;
while (<IN>)
{
last if !/^\d+ \d+\s*$/;
}
last if !defined $_;
}
+ last if !defined $_;
# ======== Output from the "fd" program about open descriptors ========
if ($is_stdout)
{
- # Skip translate_ip_address in -bP output because it ain't always there
+ # Skip translate_ip_address and use_classresources in -bP output because
+ # they aren't always there.
next if /translate_ip_address =/;
+ next if /use_classresources/;
# In certain filter tests, remove initial filter lines because they just
# clog up by repetition.
/^Transports:/ ||
/^log selectors =/ ||
/^cwd=/ ||
- /^Fixed never_users:/
+ /^Fixed never_users:/ ||
+ /^Size of off_t:/
);
}
# Various Unix management commands are recognized
-if (/^(ln|ls|du|mkdir|mkfifo|touch|cp)\s/ ||
+if (/^(ln|ls|du|mkdir|mkfifo|touch|cp|cat)\s/ ||
/^sudo (rmdir|rm|chown|chmod)\s/)
{
run_system("$_ >>test-stdout 2>>test-stderr");
{
my(@temp);
- if (/^Exim version/) { print; next; }
+ if (/^Exim version/) { print; }
- if (/^Support for: (.*)/)
+ elsif (/^Size of off_t: (\d+)/)
+ {
+ $have_largefiles = 1 if $1 > 4;
+ }
+
+ elsif (/^Support for: (.*)/)
{
print;
@temp = split /(\s+)/, $1;
%parm_support = @temp;
}
- if (/^Lookups: (.*)/)
+ elsif (/^Lookups: (.*)/)
{
print;
@temp = split /(\s+)/, $1;
%parm_lookups = @temp;
}
- if (/^Authenticators: (.*)/)
+ elsif (/^Authenticators: (.*)/)
{
print;
@temp = split /(\s+)/, $1;
%parm_authenticators = @temp;
}
- if (/^Routers: (.*)/)
+ elsif (/^Routers: (.*)/)
{
print;
@temp = split /(\s+)/, $1;
# that the basic transport name is set, and then the name with each of the
# options.
- if (/^Transports: (.*)/)
+ elsif (/^Transports: (.*)/)
{
print;
@temp = split /(\s+)/, $1;
}
}
+ # Read the ClamAV configuration file and find the socket interface.
+
if ($clamconf ne "")
{
+ my $socket_domain;
open(IN, "$clamconf") || die "\n** Unable to open $clamconf: $!\n";
while (<IN>)
{
if (/^LocalSocket\s+(.*)/)
{
$parm_clamsocket = $1;
+ $socket_domain = AF_UNIX;
last;
}
+ if (/^TCPSocket\s+(\d+)/)
+ {
+ if (defined $parm_clamsocket)
+ {
+ $parm_clamsocket .= " $1";
+ $socket_domain = AF_INET;
+ last;
+ }
+ else
+ {
+ $parm_clamsocket = " $1";
+ }
+ }
+ elsif (/^TCPAddr\s+(\S+)/)
+ {
+ if (defined $parm_clamsocket)
+ {
+ $parm_clamsocket = $1 . $parm_clamsocket;
+ $socket_domain = AF_INET;
+ last;
+ }
+ else
+ {
+ $parm_clamsocket = $1;
+ }
+ }
}
close(IN);
- if (-e $parm_clamsocket)
+
+ if (defined $socket_domain)
{
print ":\n The clamd socket is $parm_clamsocket\n";
# This test for an active ClamAV is courtesy of Daniel Tiefnig.
eval
{
- my $sun = sockaddr_un($parm_clamsocket) or die "** Failed packing '$parm_clamsocket'\n";
- socket(SOCK, AF_UNIX, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
-
+ my $socket;
+ if ($socket_domain == AF_UNIX)
+ {
+ $socket = sockaddr_un($parm_clamsocket) or die "** Failed packing '$parm_clamsocket'\n";
+ }
+ elsif ($socket_domain == AF_INET)
+ {
+ my ($ca_host, $ca_port) = split(/\s+/,$parm_clamsocket);
+ my $ca_hostent = gethostbyname($ca_host) or die "** Failed to get raw address for host '$ca_host'\n";
+ $socket = sockaddr_in($ca_port, $ca_hostent) or die "** Failed packing '$parm_clamsocket'\n";
+ }
+ else
+ {
+ die "** Unknown socket domain '$socket_domain' (should not happen)\n";
+ }
+ socket(SOCK, $socket_domain, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
local $SIG{ALRM} = sub { die "** Timeout while connecting to socket '$parm_clamsocket'\n"; };
alarm(5);
- connect(SOCK, $sun) or die "** Unable to connect to socket '$parm_clamsocket'\n";
+ connect(SOCK, $socket) or die "** Unable to connect to socket '$parm_clamsocket'\n";
alarm(0);
my $ofh = select SOCK; $| = 1; select $ofh;
}
else
{
- print ", but the socket for clamd does not exist\n";
+ print ", but the socket for clamd could not be determined\n";
print "Assume ClamAV is not running\n";
}
}
print "IPv4 address is $parm_ipv4\n";
print "IPv6 address is $parm_ipv6\n";
+# For munging test output, we need the reversed IP addresses.
+
+$parm_ipv4r = ($parm_ipv4 !~ /^\d/)? "" :
+ join(".", reverse(split /\./, $parm_ipv4));
+
+$parm_ipv6r = "";
+if ($parm_ipv6 =~ /^[\da-f]/)
+ {
+ my(@comps) = split /:/, $parm_ipv6;
+ my(@nibbles);
+ foreach $comp (@comps)
+ {
+ push @nibbles, sprintf("%lx", hex($comp) >> 8);
+ push @nibbles, sprintf("%lx", hex($comp) & 0xff);
+ }
+ $parm_ipv6r = join(".", reverse(@nibbles));
+ }
+
# Find the host name, fully qualified.
chomp($temp = `hostname`);
@test_dirs = sort readdir(DIR);
closedir(DIR);
+# Remove . and .. and CVS from the list.
+
+for ($i = 0; $i < @test_dirs; $i++)
+ {
+ my($d) = $test_dirs[$i];
+ if ($d eq "." || $d eq ".." || $d eq "CVS")
+ {
+ splice @test_dirs, $i, 1;
+ $i--;
+ }
+ }
+
+# Scan for relevant tests
+
for ($i = 0; $i < @test_dirs; $i++)
{
my($testdir) = $test_dirs[$i];
my($wantthis) = 1;
- next if $testdir eq "." || $testdir eq "..";
print ">>Checking $testdir\n" if $debug;
# Skip this directory if the first test is equal or greater than the first
if (/^rmfiltertest/) { $rmfiltertest = 1; next; }
if (/^sortlog/) { $sortlog = 1; next; }
+ if (/^need_largefiles/)
+ {
+ next if $have_largefiles;
+ print ">>> Large file support is needed for test $testno, but is not available: skipping\n";
+ $docheck = 0; # don't check output
+ undef $_; # pretend EOF
+ last;
+ }
+
if (/^need_ipv4/)
{
next if $have_ipv4;
git://git.exim.org / users / jgh / exim.git / blobdiff