Log local IP on delivery log line, under the incoming_interface log selector. Bug 507

[users/jgh/exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index b786621885cf0490e7d383becf5c21a0b55f7646..d78797fb77478dd4db6a2e6d334222db0e50fc78 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -45,7 +45,7 @@
 . Update the Copyright year (only) when changing content.
 . /////////////////////////////////////////////////////////////////////////////
 
 . Update the Copyright year (only) when changing content.
 . /////////////////////////////////////////////////////////////////////////////
 

-.set previousversion "4.84"
+.set previousversion "4.85"

 .include ./local_params
 
 .set ACL "access control lists (ACLs)"
 .include ./local_params
 
 .set ACL "access control lists (ACLs)"


@@ -3811,6 +3811,14 @@ This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option. It signifies that the
 connection to the remote host has been authenticated.
 
 by Exim in conjunction with the &%-MC%& option. It signifies that the
 connection to the remote host has been authenticated.
 

+.new
+.vitem &%-MCD%&
+.oindex "&%-MCD%&"
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-MC%& option. It signifies that the
+remote host supports the ESMTP &_DSN_& extension.
+.wen
+

 .vitem &%-MCP%&
 .oindex "&%-MCP%&"
 This option is not intended for use by external callers. It is used internally
 .vitem &%-MCP%&
 .oindex "&%-MCP%&"
 This option is not intended for use by external callers. It is used internally


@@ -4640,6 +4648,13 @@ this option.
 .oindex "&%-X%&"
 This option is interpreted by Sendmail to cause debug information to be sent
 to the named file.  It is ignored by Exim.
 .oindex "&%-X%&"
 This option is interpreted by Sendmail to cause debug information to be sent
 to the named file.  It is ignored by Exim.

+
+.vitem &%-z%&&~<&'log-line'&>
+.oindex "&%-z%&"
+This option writes its argument to Exim's logfile.
+Use is restricted to administrators; the intent is for operational notes.
+Quotes should be used to maintain a multi-word item as a single argument,
+under most shells.

 .endlist
 
 .ecindex IIDclo1
 .endlist
 
 .ecindex IIDclo1


@@ -9721,7 +9736,7 @@ ${sort{3:2:1:4}{<}{$item}}
 .endd
 sorts a list of numbers, and
 .code
 .endd
 sorts a list of numbers, and
 .code

-${sort {$lookup dnsdb{>:,,mx=example.com}} {<} {${listextract{1}{<,$item}}}}
+${sort {${lookup dnsdb{>:,,mx=example.com}}} {<} {${listextract{1}{<,$item}}}}

 .endd
 will sort an MX lookup into priority order.
 
 .endd
 will sort an MX lookup into priority order.
 


@@ -11254,6 +11269,19 @@ The building process for Exim keeps a count of the number
 of times it has been compiled. This serves to distinguish different
 compilations of the same version of the program.
 
 of times it has been compiled. This serves to distinguish different
 compilations of the same version of the program.
 

+.new
+.vitem &$config_dir$&
+.vindex "&$config_dir$&"
+The directory name of the main configuration file. That is, the content of
+&$config_file$& with the last component stripped. The value does not
+contain the trailing slash. If &$config_file$& does not contain a slash,
+&$config_dir$& is ".".
+
+.vitem &$config_file$&
+.vindex "&$config_file$&"
+The name of the main configuration file Exim is using.
+.wen
+

 .vitem &$demime_errorlevel$&
 .vindex "&$demime_errorlevel$&"
 This variable is available when Exim is compiled with
 .vitem &$demime_errorlevel$&
 .vindex "&$demime_errorlevel$&"
 This variable is available when Exim is compiled with


@@ -11361,6 +11389,15 @@ This variable contains the path to the Exim binary.
 .vindex "&$exim_uid$&"
 This variable contains the numerical value of the Exim user id.
 
 .vindex "&$exim_uid$&"
 This variable contains the numerical value of the Exim user id.
 

+.new
+.vitem &$exim_version$&
+.vindex "&$exim_uid$&"
+This variable contains the version string of the Exim build.
+The first character is a major version number, currently 4.
+Then after a dot, the next group of digits is a minor version number.
+There may be other characters following the minor version.
+.wen
+

 .vitem &$found_extension$&
 .vindex "&$found_extension$&"
 This variable is available when Exim is compiled with the
 .vitem &$found_extension$&
 .vindex "&$found_extension$&"
 This variable is available when Exim is compiled with the


@@ -13391,6 +13428,7 @@ See also the &'Policy controls'& section above.
 .table2
 .row &%accept_8bitmime%&             "advertise 8BITMIME"
 .row &%auth_advertise_hosts%&        "advertise AUTH to these hosts"
 .table2
 .row &%accept_8bitmime%&             "advertise 8BITMIME"
 .row &%auth_advertise_hosts%&        "advertise AUTH to these hosts"

+.row &%dsn_advertise_hosts%&         "advertise DSN extensions to these hosts"

 .row &%ignore_fromline_hosts%&       "allow &""From ""& from these hosts"
 .row &%ignore_fromline_local%&       "allow &""From ""& from local SMTP"
 .row &%pipelining_advertise_hosts%&  "advertise pipelining to these hosts"
 .row &%ignore_fromline_hosts%&       "allow &""From ""& from these hosts"
 .row &%ignore_fromline_local%&       "allow &""From ""& from local SMTP"
 .row &%pipelining_advertise_hosts%&  "advertise pipelining to these hosts"


@@ -13546,11 +13584,13 @@ This option defines the ACL that is run after an SMTP DATA command has been
 processed and the message itself has been received, but before the final
 acknowledgment is sent. See chapter &<<CHAPACL>>& for further details.
 
 processed and the message itself has been received, but before the final
 acknowledgment is sent. See chapter &<<CHAPACL>>& for further details.
 

+.new

 .option acl_smtp_data_prdr main string&!! accept
 .cindex "PRDR" "ACL for"
 .cindex "DATA" "PRDR ACL for"
 .cindex "&ACL;" "PRDR-related"
 .cindex "&ACL;" "per-user data processing"
 .option acl_smtp_data_prdr main string&!! accept
 .cindex "PRDR" "ACL for"
 .cindex "DATA" "PRDR ACL for"
 .cindex "&ACL;" "PRDR-related"
 .cindex "&ACL;" "per-user data processing"

+.wen

 This option defines the ACL that,
 if the PRDR feature has been negotiated,
 is run for each recipient after an SMTP DATA command has been
 This option defines the ACL that,
 if the PRDR feature has been negotiated,
 is run for each recipient after an SMTP DATA command has been


@@ -14132,6 +14172,20 @@ This is an obsolete option that is now a no-op. It used to affect the way Exim
 handled CR and LF characters in incoming messages. What happens now is
 described in section &<<SECTlineendings>>&.
 
 handled CR and LF characters in incoming messages. What happens now is
 described in section &<<SECTlineendings>>&.
 

+.new
+.option dsn_advertise_hosts main "host list&!!" unset
+.cindex "bounce messages" "success"
+.cindex "DSN" "success"
+.cindex "Delivery Status Notification" "success"
+DSN extensions (RFC3461) will be advertised in the EHLO message to,
+and accepted from, these hosts.
+Hosts may use the NOTIFY and ENVID options on RCPT TO commands,
+and RET and ORCPT options on MAIL FROM commands.
+A NOTIFY=SUCCESS option requests success-DSN messages.
+A NOTIFY= option with no argument requests that no delay or failure DSNs
+are sent.
+.wen
+

 .option dsn_from main "string&!!" "see below"
 .cindex "&'From:'& header line" "in bounces"
 .cindex "bounce messages" "&'From:'& line, specifying"
 .option dsn_from main "string&!!" "see below"
 .cindex "&'From:'& header line" "in bounces"
 .cindex "bounce messages" "&'From:'& line, specifying"


@@ -15624,13 +15678,19 @@ the time of delivery. They are normally used only for final local deliveries.
 This option is an obsolete synonym for &%bounce_return_size_limit%&.
 
 
 This option is an obsolete synonym for &%bounce_return_size_limit%&.
 
 

-.option rfc1413_hosts main "host list&!!" *
+.new
+.option rfc1413_hosts main "host list&!!" @[]

 .cindex "RFC 1413"
 .cindex "host" "for RFC 1413 calls"
 .cindex "RFC 1413"
 .cindex "host" "for RFC 1413 calls"

-RFC 1413 identification calls are made to any client host which matches an item
-in the list.
+RFC 1413 identification calls are made to any client host which matches
+an item in the list.
+The default value specifies just this host, being any local interface
+for the system.
+.wen

 
 

-.option rfc1413_query_timeout main time 5s
+.new
+.option rfc1413_query_timeout main time 0s
+.wen

 .cindex "RFC 1413" "query timeout"
 .cindex "timeout" "for RFC 1413 call"
 This sets the timeout on RFC 1413 identification calls. If it is set to zero,
 .cindex "RFC 1413" "query timeout"
 .cindex "timeout" "for RFC 1413 call"
 This sets the timeout on RFC 1413 identification calls. If it is set to zero,


@@ -16024,7 +16084,7 @@ See &%smtp_ratelimit_hosts%& above.
 See &%smtp_ratelimit_hosts%& above.
 
 
 See &%smtp_ratelimit_hosts%& above.
 
 

-.option smtp_receive_timeout main time 5m
+.option smtp_receive_timeout main time&!! 5m

 .cindex "timeout" "for SMTP input"
 .cindex "SMTP" "input timeout"
 This sets a timeout value for SMTP reception. It applies to all forms of SMTP
 .cindex "timeout" "for SMTP input"
 .cindex "SMTP" "input timeout"
 This sets a timeout value for SMTP reception. It applies to all forms of SMTP


@@ -16039,6 +16099,10 @@ SMTP data timeout on connection from...
 The former means that Exim was expecting to read an SMTP command; the latter
 means that it was in the DATA phase, reading the contents of a message.
 
 The former means that Exim was expecting to read an SMTP command; the latter
 means that it was in the DATA phase, reading the contents of a message.
 

+If the first character of the option is a &"$"& the option is
+expanded before use and may depend on
+&$sender_host_name$&, &$sender_host_address$& and &$sender_host_port$&.
+

 
 .oindex "&%-os%&"
 The value set by this option can be overridden by the
 
 .oindex "&%-os%&"
 The value set by this option can be overridden by the


@@ -16478,6 +16542,7 @@ preference order of the available ciphers. Details are given in sections
 See &%tls_verify_hosts%& below.
 
 
 See &%tls_verify_hosts%& below.
 
 

+.new

 .option tls_verify_certificates main string&!! system
 .cindex "TLS" "client certificate verification"
 .cindex "certificate" "verification of client"
 .option tls_verify_certificates main string&!! system
 .cindex "TLS" "client certificate verification"
 .cindex "certificate" "verification of client"


@@ -16500,11 +16565,7 @@ With OpenSSL the certificates specified
 explicitly
 either by file or directory
 are added to those given by the system default location.
 explicitly
 either by file or directory
 are added to those given by the system default location.

-
-With OpenSSL the certificates specified
-explicitly
-either by file or directory
-are added to those given by the system default location.
+.wen

 
 These certificates should be for the certificate authorities trusted, rather
 than the public cert of individual clients.  With both OpenSSL and GnuTLS, if
 
 These certificates should be for the certificate authorities trusted, rather
 than the public cert of individual clients.  With both OpenSSL and GnuTLS, if


@@ -16961,6 +17022,17 @@ This option must always be set. It specifies which of the available routers is
 to be used.
 
 
 to be used.
 
 

+.new
+.option dsn_lasthop routers boolean false
+.cindex "DSN" "success"
+.cindex "Delivery Status Notification" "success"
+If this option is set true, and extended DSN (RFC3461) processing is in effect,
+Exim will not pass on DSN requests to downstream DSN-aware hosts but will
+instead send a success DSN as if the next hop does not support DSN.
+Not effective on redirect routers.
+.wen
+
+

 
 .option errors_to routers string&!! unset
 .cindex "envelope sender"
 
 .option errors_to routers string&!! unset
 .cindex "envelope sender"


@@ -18967,6 +19039,13 @@ However, there are some private options which define transports for delivery to
 files and pipes, and for generating autoreplies. See the &%file_transport%&,
 &%pipe_transport%& and &%reply_transport%& descriptions below.
 
 files and pipes, and for generating autoreplies. See the &%file_transport%&,
 &%pipe_transport%& and &%reply_transport%& descriptions below.
 

+.new
+If success DSNs have been requested
+.cindex "DSN" "success"
+.cindex "Delivery Status Notification" "success"
+redirection triggers one and the DSN options are not passed any further.
+.wen
+

 
 
 .section "Redirection data" "SECID124"
 
 
 .section "Redirection data" "SECID124"


@@ -23174,12 +23253,14 @@ connects. If authentication fails, Exim will try to transfer the message
 unauthenticated. See also &%hosts_require_auth%&, and chapter
 &<<CHAPSMTPAUTH>>& for details of authentication.
 
 unauthenticated. See also &%hosts_require_auth%&, and chapter
 &<<CHAPSMTPAUTH>>& for details of authentication.
 

+.new

 .option hosts_try_prdr smtp "host list&!!" *
 .cindex "PRDR" "enabling, optional in client"
 This option provides a list of servers to which, provided they announce
 PRDR support, Exim will attempt to negotiate PRDR
 for multi-recipient messages.
 The option can usually be left as default.
 .option hosts_try_prdr smtp "host list&!!" *
 .cindex "PRDR" "enabling, optional in client"
 This option provides a list of servers to which, provided they announce
 PRDR support, Exim will attempt to negotiate PRDR
 for multi-recipient messages.
 The option can usually be left as default.

+.wen

 
 .option interface smtp "string list&!!" unset
 .cindex "bind IP address"
 
 .option interface smtp "string list&!!" unset
 .cindex "bind IP address"


@@ -23246,9 +23327,11 @@ handling only one domain at a time. This is useful if you want to use
 &$domain$& in an expansion for the transport, because it is set only when there
 is a single domain involved in a remote delivery.
 
 &$domain$& in an expansion for the transport, because it is set only when there
 is a single domain involved in a remote delivery.
 

+.new

 It is expanded per-address and can depend on any of
 &$address_data$&, &$domain_data$&, &$local_part_data$&,
 &$host$&, &$host_address$& and &$host_port$&.
 It is expanded per-address and can depend on any of
 &$address_data$&, &$domain_data$&, &$local_part_data$&,
 &$host$&, &$host_address$& and &$host_port$&.

+.wen

 
 .option port smtp string&!! "see below"
 .cindex "port" "sending TCP/IP"
 
 .option port smtp string&!! "see below"
 .cindex "port" "sending TCP/IP"


@@ -23295,7 +23378,9 @@ However, in some dialup environments hosts are assigned a different IP address
 each time they connect. In this situation the use of the IP address as part of
 the retry key leads to undesirable behaviour. Setting this option false causes
 Exim to use only the host name.
 each time they connect. In this situation the use of the IP address as part of
 the retry key leads to undesirable behaviour. Setting this option false causes
 Exim to use only the host name.

+.new

 Since it is expanded it can be made to depend on the host or domain.
 Since it is expanded it can be made to depend on the host or domain.

+.wen

 
 
 .option serialize_hosts smtp "host list&!!" unset
 
 
 .option serialize_hosts smtp "host list&!!" unset


@@ -23433,7 +23518,9 @@ unknown state), opens a new one to the same host, and then tries the delivery
 in clear.
 
 
 in clear.
 
 

+.new

 .option tls_try_verify_hosts smtp "host list&!!" *
 .option tls_try_verify_hosts smtp "host list&!!" *

+.wen

 .cindex "TLS" "server certificate verification"
 .cindex "certificate" "verification of server"
 This option gives a list of hosts for which, on encrypted connections,
 .cindex "TLS" "server certificate verification"
 .cindex "certificate" "verification of server"
 This option gives a list of hosts for which, on encrypted connections,


@@ -23446,6 +23533,7 @@ The &$tls_out_certificate_verified$& variable is set when
 certificate verification succeeds.
 
 
 certificate verification succeeds.
 
 

+.new

 .option tls_verify_cert_hostnames smtp "host list&!!" *
 .cindex "TLS" "server certificate hostname verification"
 .cindex "certificate" "verification of server"
 .option tls_verify_cert_hostnames smtp "host list&!!" *
 .cindex "TLS" "server certificate hostname verification"
 .cindex "certificate" "verification of server"


@@ -23457,8 +23545,10 @@ versus Subject and Subject-Alternate-Name fields.  Wildcard names are permitted
 limited to being the initial component of a 3-or-more component FQDN.
 
 There is no equivalent checking on client certificates.
 limited to being the initial component of a 3-or-more component FQDN.
 
 There is no equivalent checking on client certificates.

+.wen

 
 
 
 

+.new

 .option tls_verify_certificates smtp string&!! system
 .cindex "TLS" "server certificate verification"
 .cindex "certificate" "verification of server"
 .option tls_verify_certificates smtp string&!! system
 .cindex "TLS" "server certificate verification"
 .cindex "certificate" "verification of server"


@@ -23477,6 +23567,7 @@ must be specified.
 
 The use of a directory for the option value is not avilable for GnuTLS versions
 preceding 3.3.6 and a single file must be used.
 
 The use of a directory for the option value is not avilable for GnuTLS versions
 preceding 3.3.6 and a single file must be used.

+.wen

 
 With OpenSSL the certificates specified
 explicitly
 
 With OpenSSL the certificates specified
 explicitly


@@ -26320,7 +26411,9 @@ apply to all TLS connections. For any host that matches one of these options,
 Exim requests a certificate as part of the setup of the TLS session. The
 contents of the certificate are verified by comparing it with a list of
 expected certificates.
 Exim requests a certificate as part of the setup of the TLS session. The
 contents of the certificate are verified by comparing it with a list of
 expected certificates.

+.new

 These may be the system default set (depending on library version),
 These may be the system default set (depending on library version),

+.wen

 an explicit file or,
 depending on library version, a directory, identified by
 &%tls_verify_certificates%&.
 an explicit file or,
 depending on library version, a directory, identified by
 &%tls_verify_certificates%&.


@@ -26483,7 +26576,9 @@ if it requests it. If the server is Exim, it will request a certificate only if
 
 If the &%tls_verify_certificates%& option is set on the &(smtp)& transport, it
 specifies a collection of expected server certificates.
 
 If the &%tls_verify_certificates%& option is set on the &(smtp)& transport, it
 specifies a collection of expected server certificates.

-These may be the system default set (depeding on library version),
+.new
+These may be the system default set (depending on library version),
+.wen

 a file or,
 depnding on liibrary version, a directory,
 must name a file or,
 a file or,
 depnding on liibrary version, a directory,
 must name a file or,


@@ -30282,10 +30377,14 @@ It supports a &"generic"& interface to scanners called via the shell, and
 specialized interfaces for &"daemon"& type virus scanners, which are resident
 in memory and thus are much faster.
 
 specialized interfaces for &"daemon"& type virus scanners, which are resident
 in memory and thus are much faster.
 

+.new
+A timeout of 2 minutes is applied to a scanner call (by default);
+if it expires then a defer action is taken.
+.wen

 
 .oindex "&%av_scanner%&"
 
 .oindex "&%av_scanner%&"

-You can set the &%av_scanner%& option in first part of the Exim configuration
-file to specify which scanner to use, together with any additional options that
+You can set the &%av_scanner%& option in the main part of the configuration
+to specify which scanner to use, together with any additional options that

 are needed. The basic syntax is as follows:
 .display
 &`av_scanner = <`&&'scanner-type'&&`>:<`&&'option1'&&`>:<`&&'option2'&&`>:[...]`&
 are needed. The basic syntax is as follows:
 .display
 &`av_scanner = <`&&'scanner-type'&&`>:<`&&'option1'&&`>:<`&&'option2'&&`>:[...]`&


@@ -30300,6 +30399,41 @@ The usual list-parsing of the content (see &<<SECTlistconstruct>>&) applies.
 The following scanner types are supported in this release:
 
 .vlist
 The following scanner types are supported in this release:
 
 .vlist

+.new
+.vitem &%avast%&
+.cindex "virus scanners" "avast"
+This is the scanner daemon of Avast. It has been tested with Avast Core
+Security (currenty at version 1.1.7).
+You can get a trial version at &url(http://www.avast.com) or for Linux
+at &url(http://www.avast.com/linux-server-antivirus).
+This scanner type takes one option,
+which can be either a full path to a UNIX socket,
+or host and port specifiers separated by white space.
+The host may be a name or an IP address; the port is either a
+single number or a pair of numbers with a dash between.
+Any further options are given, on separate lines,
+to the daemon as options before the main scan command.
+For example:
+.code
+av_scanner = avast:/var/run/avast/scan.sock:FLAGS -fullfiles:SENSITIVITY -pup
+av_scanner = avast:192.168.2.22 5036
+.endd
+If you omit the argument, the default path
+&_/var/run/avast/scan.sock_&
+is used.
+If you use a remote host,
+you need to make Exim's spool directory available to it,
+as the scanner is passed a file path, not file contents.
+For information about available commands and their options you may use 
+.code
+$ socat UNIX:/var/run/avast/scan.sock STDIO:
+    FLAGS
+    SENSITIVITY
+    PACK
+.endd
+.wen
+
+

 .vitem &%aveserver%&
 .cindex "virus scanners" "Kaspersky"
 This is the scanner daemon of Kaspersky Version 5. You can get a trial version
 .vitem &%aveserver%&
 .cindex "virus scanners" "Kaspersky"
 This is the scanner daemon of Kaspersky Version 5. You can get a trial version


@@ -30491,7 +30625,10 @@ which case each use of the &%malware%& condition causes a new scan of the
 message.
 
 The &%malware%& condition takes a right-hand argument that is expanded before
 message.
 
 The &%malware%& condition takes a right-hand argument that is expanded before

-use. It can then be one of
+.new
+use and taken as a list, slash-separated by default.
+.wen
+The first element can then be one of

 
 .ilist
 &"true"&, &"*"&, or &"1"&, in which case the message is scanned for viruses.
 
 .ilist
 &"true"&, &"*"&, or &"1"&, in which case the message is scanned for viruses.


@@ -30504,11 +30641,25 @@ the condition fails immediately.
 A regular expression, in which case the message is scanned for viruses. The
 condition succeeds if a virus is found and its name matches the regular
 expression. This allows you to take special actions on certain types of virus.
 A regular expression, in which case the message is scanned for viruses. The
 condition succeeds if a virus is found and its name matches the regular
 expression. This allows you to take special actions on certain types of virus.

+.new
+Note that &"/"& characters in the RE must be doubled due to the list-processing,
+unless the separator is changed (in the usual way).
+.wen

 .endlist
 
 .endlist
 

-You can append &`/defer_ok`& to the &%malware%& condition to accept messages
-even if there is a problem with the virus scanner. Otherwise, such a problem
-causes the ACL to defer.
+You can append a &`defer_ok`& element to the &%malware%& argument list to accept
+messages even if there is a problem with the virus scanner.
+Otherwise, such a problem causes the ACL to defer.
+
+.new
+You can append a &`tmo=<val>`& element to the &%malware%& argument list to
+specify a non-default timeout.  The default is two minutes.
+For example:
+.code
+malware = * / defer_ok / tmo=10s
+.endd
+A timeout causes the ACL to defer.
+.wen

 
 .vindex "&$malware_name$&"
 When a virus is found, the condition sets up an expansion variable called
 
 .vindex "&$malware_name$&"
 When a virus is found, the condition sets up an expansion variable called


@@ -33451,13 +33602,10 @@ failing addresses with their error messages.
 The third item is used to introduce any text from pipe transports that is to be
 returned to the sender. It is omitted if there is no such text.
 .next
 The third item is used to introduce any text from pipe transports that is to be
 returned to the sender. It is omitted if there is no such text.
 .next

-The fourth item is used to introduce the copy of the message that is returned
-as part of the error report.
-.next
-The fifth item is added after the fourth one if the returned message is
-truncated because it is bigger than &%return_size_limit%&.
-.next
-The sixth item is added after the copy of the original message.
+.new
+The fourth, fifth and sixth items will be ignored and may be empty.
+The fields exist for back-compatibility
+.wen

 .endlist
 
 The default state (&%bounce_message_file%& unset) is equivalent to the
 .endlist
 
 The default state (&%bounce_message_file%& unset) is equivalent to the


@@ -34795,8 +34943,8 @@ selection marked by asterisks:
 &`*etrn                       `&  ETRN commands
 &`*host_lookup_failed         `&  as it says
 &` ident_timeout              `&  timeout for ident connection
 &`*etrn                       `&  ETRN commands
 &`*host_lookup_failed         `&  as it says
 &` ident_timeout              `&  timeout for ident connection

-&` incoming_interface         `&  incoming interface on <= lines
-&` incoming_port              `&  incoming port on <= lines
+&` incoming_interface         `&  local interface on <= and => lines
+&` incoming_port              `&  remote port on <= lines

 &`*lost_incoming_connection   `&  as it says (includes timeouts)
 &` outgoing_port              `&  add remote port to => lines
 &`*queue_run                  `&  start and end queue runs
 &`*lost_incoming_connection   `&  as it says (includes timeouts)
 &` outgoing_port              `&  add remote port to => lines
 &`*queue_run                  `&  start and end queue runs


@@ -34820,7 +34968,9 @@ selection marked by asterisks:
 &` smtp_protocol_error        `&  SMTP protocol errors
 &` smtp_syntax_error          `&  SMTP syntax errors
 &` subject                    `&  contents of &'Subject:'& on <= lines
 &` smtp_protocol_error        `&  SMTP protocol errors
 &` smtp_syntax_error          `&  SMTP syntax errors
 &` subject                    `&  contents of &'Subject:'& on <= lines

+.new

 &`*tls_certificate_verified   `&  certificate verification status
 &`*tls_certificate_verified   `&  certificate verification status

+.wen

 &`*tls_cipher                 `&  TLS cipher suite on <= and => lines
 &` tls_peerdn                 `&  TLS peer DN on <= and => lines
 &` tls_sni                    `&  TLS SNI on <= lines
 &`*tls_cipher                 `&  TLS cipher suite on <= and => lines
 &` tls_peerdn                 `&  TLS peer DN on <= and => lines
 &` tls_sni                    `&  TLS SNI on <= lines


@@ -34913,12 +35063,16 @@ routing email addresses, but it does apply to &"byname"& lookups.
 client's ident port times out.
 .next
 .cindex "log" "incoming interface"
 client's ident port times out.
 .next
 .cindex "log" "incoming interface"

+.cindex "log" "local interface"
+.cindex "log" "local address and port"
+.cindex "TCP/IP" "logging local address and port"

 .cindex "interface" "logging"
 &%incoming_interface%&: The interface on which a message was received is added
 to the &"<="& line as an IP address in square brackets, tagged by I= and
 followed by a colon and the port number. The local interface and port are also
 .cindex "interface" "logging"
 &%incoming_interface%&: The interface on which a message was received is added
 to the &"<="& line as an IP address in square brackets, tagged by I= and
 followed by a colon and the port number. The local interface and port are also

-added to other SMTP log lines, for example &"SMTP connection from"&, and to
-rejection lines.
+added to other SMTP log lines, for example &"SMTP connection from"& and to
+rejection lines
+and (despite the name) the local interface is added to &"=>"& lines..

 .next
 .cindex "log" "incoming remote port"
 .cindex "port" "logging remote"
 .next
 .cindex "log" "incoming remote port"
 .cindex "port" "logging remote"