* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2015 */
+/* Copyright (c) University of Cambridge 1995 - 2016 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions for handling an incoming SMTP call. */
/* Size of buffer for reading SMTP commands. We used to use 512, as defined
by RFC 821. However, RFC 1869 specifies that this must be increased for SMTP
commands that accept arguments, and this in particular applies to AUTH, where
-the data can be quite long. More recently this value was 2048 in Exim;
+the data can be quite long. More recently this value was 2048 in Exim;
however, RFC 4954 (circa 2007) recommends 12288 bytes to handle AUTH. Clients
-such as Thunderbird will send an AUTH with an initial-response for GSSAPI.
-The maximum size of a Kerberos ticket under Windows 2003 is 12000 bytes, and
+such as Thunderbird will send an AUTH with an initial-response for GSSAPI.
+The maximum size of a Kerberos ticket under Windows 2003 is 12000 bytes, and
we need room to handle large base64-encoded AUTHs for GSSAPI.
*/
QUIT_CMD, HELP_CMD,
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
PROXY_FAIL_IGNORE_CMD,
#endif
static BOOL rcpt_in_progress;
static int nonmail_command_count;
static BOOL smtp_exit_function_called = 0;
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
static BOOL smtputf8_advertised;
#endif
static int synprot_error_count;
ENV_MAIL_OPT_PRDR,
#endif
ENV_MAIL_OPT_RET, ENV_MAIL_OPT_ENVID,
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
ENV_MAIL_OPT_UTF8,
#endif
};
#endif
{ US"RET", ENV_MAIL_OPT_RET, TRUE },
{ US"ENVID", ENV_MAIL_OPT_ENVID, TRUE },
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
{ US"SMTPUTF8",ENV_MAIL_OPT_UTF8, FALSE }, /* rfc6531 */
#endif
/* keep this the last entry */
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/*************************************************
* Restore socket timeout to previous value *
*************************************************/
/* Cannot configure local connection as a proxy inbound */
if (sender_host_address == NULL) return proxy_session;
-rc = verify_check_this_host(&proxy_required_hosts, NULL, NULL,
+rc = verify_check_this_host(CUSS &hosts_proxy, NULL, NULL,
sender_host_address, NULL);
if (rc == OK)
{
DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
return ERRNO_PROXYFAIL;
}
- proxy_host_address = sender_host_address;
+ proxy_local_address = sender_host_address;
sender_host_address = string_copy(US tmpip);
tmpport = ntohs(hdr.v2.addr.ip4.src_port);
- proxy_host_port = sender_host_port;
+ proxy_local_port = sender_host_port;
sender_host_port = tmpport;
/* Save dest ip/port */
tmpaddr.sin_addr.s_addr = hdr.v2.addr.ip4.dst_addr;
DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
return ERRNO_PROXYFAIL;
}
- proxy_target_address = string_copy(US tmpip);
+ proxy_external_address = string_copy(US tmpip);
tmpport = ntohs(hdr.v2.addr.ip4.dst_port);
- proxy_target_port = tmpport;
+ proxy_external_port = tmpport;
goto done;
case 0x21: /* TCPv6 address type */
iptype = US"IPv6";
DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
return ERRNO_PROXYFAIL;
}
- proxy_host_address = sender_host_address;
+ proxy_local_address = sender_host_address;
sender_host_address = string_copy(US tmpip6);
tmpport = ntohs(hdr.v2.addr.ip6.src_port);
- proxy_host_port = sender_host_port;
+ proxy_local_port = sender_host_port;
sender_host_port = tmpport;
/* Save dest ip/port */
memmove(tmpaddr6.sin6_addr.s6_addr, hdr.v2.addr.ip6.dst_addr, 16);
DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
return ERRNO_PROXYFAIL;
}
- proxy_target_address = string_copy(US tmpip6);
+ proxy_external_address = string_copy(US tmpip6);
tmpport = ntohs(hdr.v2.addr.ip6.dst_port);
- proxy_target_port = tmpport;
+ proxy_external_port = tmpport;
goto done;
default:
DEBUG(D_receive)
debug_printf("Proxied src arg is not an %s address\n", iptype);
goto proxyfail;
}
- proxy_host_address = sender_host_address;
+ proxy_local_address = sender_host_address;
sender_host_address = p;
p = sp + 1;
if ((sp = Ustrchr(p, ' ')) == NULL)
debug_printf("Proxy dest arg is not an %s address\n", iptype);
goto proxyfail;
}
- proxy_target_address = p;
+ proxy_external_address = p;
p = sp + 1;
if ((sp = Ustrchr(p, ' ')) == NULL)
{
debug_printf("Proxied src port '%s' not an integer\n", p);
goto proxyfail;
}
- proxy_host_port = sender_host_port;
+ proxy_local_port = sender_host_port;
sender_host_port = tmp_port;
p = sp + 1;
if ((sp = Ustrchr(p, '\0')) == NULL)
debug_printf("Proxy dest port '%s' not an integer\n", p);
goto proxyfail;
}
- proxy_target_port = tmp_port;
+ proxy_external_port = tmp_port;
/* Already checked for /r /n above. Good V1 header received. */
goto done;
}
for (p = cmd_list; p < cmd_list_end; p++)
{
- #ifdef EXPERIMENTAL_PROXY
+ #ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
if (proxy_session && proxy_session_failed)
{
}
}
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
if (proxy_session && proxy_session_failed)
return PROXY_FAIL_IGNORE_CMD;
spf_result = NULL;
spf_smtp_comment = NULL;
#endif
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
message_smtputf8 = FALSE;
#endif
body_linecount = body_zerocount = 0;
/* Apply SMTP rewrite, then extract address. Don't allow "<>" as a
recipient address */
- recipient = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules) : smtp_cmd_data;
+ recipient = rewrite_existflags & rewrite_smtp
+ ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- /* rfc821_domains = TRUE; << no longer needed */
recipient = parse_extract_address(recipient, &errmess, &start, &end,
&recipient_domain, FALSE);
- /* rfc821_domains = FALSE; << no longer needed */
- if (recipient == NULL)
+ if (!recipient)
/* The function moan_smtp_batch() does not return. */
moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
smtp_exit_function_called = FALSE; /* For avoiding loop in not-quit exit */
-memset(sender_host_cache, 0, sizeof(sender_host_cache));
-
/* If receiving by -bs from a trusted user, or testing with -bh, we allow
authentication settings from -oMaa to remain in force. */
tls_advertised = FALSE;
#endif
dsn_advertised = FALSE;
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
smtputf8_advertised = FALSE;
#endif
if (smtp_batched_input) return TRUE;
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/* If valid Proxy Protocol source is connecting, set up session.
* Failure will not allow any SMTP function other than QUIT. */
proxy_session = FALSE;
esc = US""; /* Default extended status code */
esclen = 0; /* Length of esc */
-if (user_msg == NULL)
+if (!user_msg)
{
- s = expand_string(smtp_banner);
- if (s == NULL)
+ if (!(s = expand_string(smtp_banner)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" (smtp_banner) "
"failed: %s", smtp_banner, expand_string_message);
}
{
int codelen = 3;
s = user_msg;
- smtp_message_code(&code, &codelen, &s, NULL);
+ smtp_message_code(&code, &codelen, &s, NULL, TRUE);
if (codelen > 4)
{
esc = code + 4;
{
int len;
uschar *linebreak = Ustrchr(p, '\n');
- ss = string_cat(ss, &size, &ptr, code, 3);
+ ss = string_catn(ss, &size, &ptr, code, 3);
if (linebreak == NULL)
{
len = Ustrlen(p);
- ss = string_cat(ss, &size, &ptr, US" ", 1);
+ ss = string_catn(ss, &size, &ptr, US" ", 1);
}
else
{
len = linebreak - p;
- ss = string_cat(ss, &size, &ptr, US"-", 1);
+ ss = string_catn(ss, &size, &ptr, US"-", 1);
}
- ss = string_cat(ss, &size, &ptr, esc, esclen);
- ss = string_cat(ss, &size, &ptr, p, len);
- ss = string_cat(ss, &size, &ptr, US"\r\n", 2);
+ ss = string_catn(ss, &size, &ptr, esc, esclen);
+ ss = string_catn(ss, &size, &ptr, p, len);
+ ss = string_catn(ss, &size, &ptr, US"\r\n", 2);
p += len;
if (linebreak != NULL) p++;
}
codelen length of smtp code; if > 4 there's an ESC
msg message text
log_msg optional log message, to be adjusted with the new SMTP code
+ check_valid if true, verify the response code
Returns: nothing
*/
void
-smtp_message_code(uschar **code, int *codelen, uschar **msg, uschar **log_msg)
+smtp_message_code(uschar **code, int *codelen, uschar **msg, uschar **log_msg,
+ BOOL check_valid)
{
int n;
int ovector[3];
-if (msg == NULL || *msg == NULL) return;
+if (!msg || !*msg) return;
-n = pcre_exec(regex_smtp_code, NULL, CS *msg, Ustrlen(*msg), 0,
- PCRE_EOPT, ovector, sizeof(ovector)/sizeof(int));
-if (n < 0) return;
+if ((n = pcre_exec(regex_smtp_code, NULL, CS *msg, Ustrlen(*msg), 0,
+ PCRE_EOPT, ovector, sizeof(ovector)/sizeof(int))) < 0) return;
-if ((*msg)[0] != (*code)[0])
+if (check_valid && (*msg)[0] != (*code)[0])
{
log_write(0, LOG_MAIN|LOG_PANIC, "configured error code starts with "
"incorrect digit (expected %c) in \"%s\"", (*code)[0], *msg);
(aka RFC 2821) has concluded that the response should be 252 in the disabled
state, because there are broken clients that try VRFY before RCPT. A 5xx
response should be given only when the address is positively known to be
-undeliverable. Sigh. Also, for ETRN, 458 is given on refusal, and for AUTH,
-503.
+undeliverable. Sigh. We return 252 if there is no VRFY ACL or it provides
+no explicit code, but if there is one we let it know best.
+Also, for ETRN, 458 is given on refusal, and for AUTH, 503.
From Exim 4.63, it is possible to override the response code details by
providing a suitable response code string at the start of the message provided
in user_msg. The code's first digit is checked for validity.
Arguments:
- where where the ACL was called from
- rc the failure code
- user_msg a message that can be included in an SMTP response
- log_msg a message for logging
+ where where the ACL was called from
+ rc the failure code
+ user_msg a message that can be included in an SMTP response
+ log_msg a message for logging
Returns: 0 in most cases
2 if the failure code was FAIL_DROP, in which case the
/* Set the default SMTP code, and allow a user message to change it. */
-smtp_code = (rc != FAIL)? US"451" : acl_wherecodes[where];
-smtp_message_code(&smtp_code, &codelen, &user_msg, &log_msg);
+smtp_code = rc == FAIL ? acl_wherecodes[where] : US"451";
+smtp_message_code(&smtp_code, &codelen, &user_msg, &log_msg,
+ where != ACL_WHERE_VRFY);
/* We used to have sender_address here; however, there was a bug that was not
updating sender_address after a rewrite during a verify. When this bug was
if (log_reject_target != 0)
{
#ifdef SUPPORT_TLS
- uschar * s = s_tlslog(NULL, NULL, NULL);
- if (!s) s = US"";
+ uschar * tls = s_tlslog(NULL, NULL, NULL);
+ if (!tls) tls = US"";
#else
- uschar * s = US"";
+ uschar * tls = US"";
#endif
- log_write(0, log_reject_target, "%s%s %s%srejected %s%s",
- host_and_ident(TRUE), s,
- sender_info, (rc == FAIL)? US"" : US"temporarily ", what, log_msg);
+ log_write(0, log_reject_target, "%s%s%s %s%srejected %s%s",
+ LOGGING(dnssec) && sender_host_dnssec ? US" DS" : US"",
+ host_and_ident(TRUE),
+ tls,
+ sender_info,
+ rc == FAIL ? US"" : US"temporarily ",
+ what, log_msg);
}
if (!drop) return 0;
smtp_user_msg(uschar *code, uschar *user_msg)
{
int len = 3;
-smtp_message_code(&code, &len, &user_msg, NULL);
+smtp_message_code(&code, &len, &user_msg, NULL, TRUE);
smtp_respond(code, len, TRUE, user_msg);
}
+
+
+static int
+qualify_recipient(uschar ** recipient, uschar * smtp_cmd_data, uschar * tag)
+{
+int rd;
+if (allow_unqualified_recipient || strcmpic(*recipient, US"postmaster") == 0)
+ {
+ DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
+ *recipient);
+ rd = Ustrlen(recipient) + 1;
+ *recipient = rewrite_address_qualify(*recipient, TRUE);
+ return rd;
+ }
+smtp_printf("501 %s: recipient address must contain a domain\r\n",
+ smtp_cmd_data);
+log_write(L_smtp_syntax_error,
+ LOG_MAIN|LOG_REJECT, "unqualified %s rejected: <%s> %s%s",
+ tag, *recipient, host_and_ident(TRUE), host_lookup_msg);
+return 0;
+}
+
+
+
+
/*************************************************
* Initialize for SMTP incoming message *
*************************************************/
)
{
cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = FALSE;
- if (acl_smtp_auth)
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
{
- rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth, &user_msg, &log_msg);
- if (rc != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
- continue;
- }
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
+ continue;
}
for (au = auths; au; au = au->next)
{
smtp_cmd_data = NULL;
- if ((c = smtp_in_auth(au, &s, &ss)) != OK)
- log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
- au->name, host_and_ident(FALSE), ss);
+ if (smtp_in_auth(au, &s, &ss) == OK)
+ { DEBUG(D_auth) debug_printf("tls auth succeeded\n"); }
else
- DEBUG(D_auth) debug_printf("tls auth succeeded\n");
-
+ { DEBUG(D_auth) debug_printf("tls auth not succeeded\n"); }
break;
}
}
/* Check the ACL */
- if (acl_smtp_auth)
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
{
- rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth, &user_msg, &log_msg);
- if (rc != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
- break;
- }
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
+ break;
}
/* Find the name of the requested authentication mechanism. */
/* Apply an ACL check if one is defined; afterwards, recheck
synchronization in case the client started sending in a delay. */
- if (acl_smtp_helo != NULL)
- {
- rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo, &user_msg, &log_msg);
- if (rc != OK)
+ if (acl_smtp_helo)
+ if ((rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo,
+ &user_msg, &log_msg)) != OK)
{
done = smtp_handle_acl_fail(ACL_WHERE_HELO, rc, user_msg, log_msg);
sender_helo_name = NULL;
break;
}
else if (!check_sync()) goto SYNC_FAILURE;
- }
/* Generate an OK reply. The default string includes the ident if present,
and also the IP address if present. Reflecting back the ident is intended
tls_advertised = FALSE;
#endif
dsn_advertised = FALSE;
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
smtputf8_advertised = FALSE;
#endif
if (sender_host_address != NULL)
{
- s = string_cat(s, &size, &ptr, US" [", 2);
- s = string_cat(s, &size, &ptr, sender_host_address,
- Ustrlen(sender_host_address));
- s = string_cat(s, &size, &ptr, US"]", 1);
+ s = string_catn(s, &size, &ptr, US" [", 2);
+ s = string_cat (s, &size, &ptr, sender_host_address);
+ s = string_catn(s, &size, &ptr, US"]", 1);
}
}
{
char *ss;
int codelen = 4;
- smtp_message_code(&smtp_code, &codelen, &user_msg, NULL);
+ smtp_message_code(&smtp_code, &codelen, &user_msg, NULL, TRUE);
s = string_sprintf("%.*s%s", codelen, smtp_code, user_msg);
if ((ss = strpbrk(CS s, "\r\n")) != NULL)
{
size = ptr + 1;
}
- s = string_cat(s, &size, &ptr, US"\r\n", 2);
+ s = string_catn(s, &size, &ptr, US"\r\n", 2);
/* If we received EHLO, we must create a multiline response which includes
the functions supported. */
{
sprintf(CS big_buffer, "%.3s-SIZE %d\r\n", smtp_code,
thismessage_size_limit);
- s = string_cat(s, &size, &ptr, big_buffer, Ustrlen(big_buffer));
+ s = string_cat(s, &size, &ptr, big_buffer);
}
else
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-SIZE\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-SIZE\r\n", 7);
}
/* Exim does not do protocol conversion or data conversion. It is 8-bit
if (accept_8bitmime)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-8BITMIME\r\n", 11);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-8BITMIME\r\n", 11);
}
/* Advertise DSN support if configured to do so. */
- if (verify_check_host(&dsn_advertise_hosts) != FAIL)
+ if (verify_check_host(&dsn_advertise_hosts) != FAIL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-DSN\r\n", 6);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-DSN\r\n", 6);
dsn_advertised = TRUE;
}
if (acl_smtp_etrn != NULL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-ETRN\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-ETRN\r\n", 7);
}
/* Advertise EXPN if there's an ACL checking whether a host is
if (acl_smtp_expn != NULL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-EXPN\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-EXPN\r\n", 7);
}
/* Exim is quite happy with pipelining, so let the other end know that
if (pipelining_enable &&
verify_check_host(&pipelining_advertise_hosts) == OK)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-PIPELINING\r\n", 13);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-PIPELINING\r\n", 13);
sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
pipelining_advertised = TRUE;
}
int saveptr;
if (first)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-AUTH", 5);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-AUTH", 5);
first = FALSE;
auth_advertised = TRUE;
}
saveptr = ptr;
- s = string_cat(s, &size, &ptr, US" ", 1);
- s = string_cat(s, &size, &ptr, au->public_name,
- Ustrlen(au->public_name));
+ s = string_catn(s, &size, &ptr, US" ", 1);
+ s = string_cat (s, &size, &ptr, au->public_name);
while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]);
au->advertised = TRUE;
}
else
au->advertised = FALSE;
- if (!first) s = string_cat(s, &size, &ptr, US"\r\n", 2);
+ if (!first) s = string_catn(s, &size, &ptr, US"\r\n", 2);
}
/* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer)
if (tls_in.active < 0 &&
verify_check_host(&tls_advertise_hosts) != FAIL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-STARTTLS\r\n", 11);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-STARTTLS\r\n", 11);
tls_advertised = TRUE;
}
#endif
/* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
if (prdr_enable)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-PRDR\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-PRDR\r\n", 7);
}
#endif
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
if ( accept_8bitmime
&& verify_check_host(&smtputf8_advertise_hosts) != FAIL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-SMTPUTF8\r\n", 11);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-SMTPUTF8\r\n", 11);
smtputf8_advertised = TRUE;
}
#endif
/* Finish off the multiline reply with one that is always available. */
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US" HELP\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US" HELP\r\n", 7);
}
/* Terminate the string (for debug), write it, and note that HELO/EHLO
rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
&user_msg, &log_msg);
}
-
+
switch (rc)
{
case OK:
expand_check_condition(authenticated_by->mail_auth_condition,
authenticated_by->name, US"authenticator"))
break; /* Accept the AUTH */
-
+
ignore_msg = US"server_mail_auth_condition failed";
if (authenticated_id != NULL)
ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
ignore_msg, authenticated_id);
-
+
/* Fall through */
-
+
case FAIL:
authenticated_sender = NULL;
log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
value, host_and_ident(TRUE), ignore_msg);
break;
-
+
/* Should only get DEFER or ERROR here. Put back terminator
overrides for error message */
-
+
default:
value[-1] = '=';
name[-1] = ' ';
break;
#endif
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
case ENV_MAIL_OPT_UTF8:
if (smtputf8_advertised)
{
global_rewrite_rules)
: smtp_cmd_data;
- /* rfc821_domains = TRUE; << no longer needed */
raw_sender =
parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
TRUE);
- /* rfc821_domains = FALSE; << no longer needed */
- if (raw_sender == NULL)
+ if (!raw_sender)
{
done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
break;
US"",
#endif
US"\r\n");
- else
+ else
{
#ifndef DISABLE_PRDR
if (prdr_requested)
/* Apply SMTP rewriting then extract the working address. Don't allow "<>"
as a recipient address */
- recipient = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules) : smtp_cmd_data;
-
- /* rfc821_domains = TRUE; << no longer needed */
- recipient = parse_extract_address(recipient, &errmess, &start, &end,
- &recipient_domain, FALSE);
- /* rfc821_domains = FALSE; << no longer needed */
+ recipient = rewrite_existflags & rewrite_smtp
+ ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- if (recipient == NULL)
+ if (!(recipient = parse_extract_address(recipient, &errmess, &start, &end,
+ &recipient_domain, FALSE)))
{
done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
rcpt_fail_count++;
we must always qualify this address, regardless. */
if (recipient_domain == 0)
- {
- if (allow_unqualified_recipient ||
- strcmpic(recipient, US"postmaster") == 0)
- {
- DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
- recipient);
- recipient_domain = Ustrlen(recipient) + 1;
- recipient = rewrite_address_qualify(recipient, TRUE);
- }
- else
+ if (!(recipient_domain = qualify_recipient(&recipient, smtp_cmd_data,
+ US"recipient")))
{
rcpt_fail_count++;
- smtp_printf("501 %s: recipient address must contain a domain\r\n",
- smtp_cmd_data);
- log_write(L_smtp_syntax_error,
- LOG_MAIN|LOG_REJECT, "unqualified recipient rejected: "
- "<%s> %s%s", recipient, host_and_ident(TRUE),
- host_lookup_msg);
break;
}
- }
/* Check maximum allowed */
if (user_msg == NULL) smtp_printf("250 Accepted\r\n");
else smtp_user_msg(US"250", user_msg);
receive_add_recipient(recipient, -1);
-
+
/* Set the dsn flags in the recipients_list */
recipients_list[recipients_count-1].orcpt = orcpt;
recipients_list[recipients_count-1].dsn_flags = flags;
case VRFY_CMD:
- HAD(SCH_VRFY);
- rc = acl_check(ACL_WHERE_VRFY, NULL, acl_smtp_vrfy, &user_msg, &log_msg);
- if (rc != OK)
- done = smtp_handle_acl_fail(ACL_WHERE_VRFY, rc, user_msg, log_msg);
- else
{
- uschar *address;
- uschar *s = NULL;
+ uschar * address;
+
+ HAD(SCH_VRFY);
- /* rfc821_domains = TRUE; << no longer needed */
- address = parse_extract_address(smtp_cmd_data, &errmess, &start, &end,
- &recipient_domain, FALSE);
- /* rfc821_domains = FALSE; << no longer needed */
+ if (!(address = parse_extract_address(smtp_cmd_data, &errmess,
+ &start, &end, &recipient_domain, FALSE)))
+ {
+ smtp_printf("501 %s\r\n", errmess);
+ break;
+ }
- if (address == NULL)
- s = string_sprintf("501 %s", errmess);
+ if (recipient_domain == 0)
+ if (!(recipient_domain = qualify_recipient(&address, smtp_cmd_data,
+ US"verify")))
+ break;
+
+ if ((rc = acl_check(ACL_WHERE_VRFY, address, acl_smtp_vrfy,
+ &user_msg, &log_msg)) != OK)
+ done = smtp_handle_acl_fail(ACL_WHERE_VRFY, rc, user_msg, log_msg);
else
- {
- address_item *addr = deliver_make_addr(address, FALSE);
- switch(verify_address(addr, NULL, vopt_is_recipient | vopt_qualify, -1,
- -1, -1, NULL, NULL, NULL))
- {
- case OK:
- s = string_sprintf("250 <%s> is deliverable", address);
- break;
+ {
+ uschar * s = NULL;
+ address_item * addr = deliver_make_addr(address, FALSE);
- case DEFER:
- s = (addr->user_message != NULL)?
- string_sprintf("451 <%s> %s", address, addr->user_message) :
- string_sprintf("451 Cannot resolve <%s> at this time", address);
- break;
+ switch(verify_address(addr, NULL, vopt_is_recipient | vopt_qualify, -1,
+ -1, -1, NULL, NULL, NULL))
+ {
+ case OK:
+ s = string_sprintf("250 <%s> is deliverable", address);
+ break;
- case FAIL:
- s = (addr->user_message != NULL)?
- string_sprintf("550 <%s> %s", address, addr->user_message) :
- string_sprintf("550 <%s> is not deliverable", address);
- log_write(0, LOG_MAIN, "VRFY failed for %s %s",
- smtp_cmd_argument, host_and_ident(TRUE));
- break;
- }
- }
+ case DEFER:
+ s = (addr->user_message != NULL)?
+ string_sprintf("451 <%s> %s", address, addr->user_message) :
+ string_sprintf("451 Cannot resolve <%s> at this time", address);
+ break;
- smtp_printf("%s\r\n", s);
+ case FAIL:
+ s = (addr->user_message != NULL)?
+ string_sprintf("550 <%s> %s", address, addr->user_message) :
+ string_sprintf("550 <%s> is not deliverable", address);
+ log_write(0, LOG_MAIN, "VRFY failed for %s %s",
+ smtp_cmd_argument, host_and_ident(TRUE));
+ break;
+ }
+
+ smtp_printf("%s\r\n", s);
+ }
+ break;
}
- break;
case EXPN_CMD:
/* Apply an ACL check if one is defined */
- if (acl_smtp_starttls != NULL)
+ if ( acl_smtp_starttls
+ && (rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls,
+ &user_msg, &log_msg)) != OK
+ )
{
- rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls, &user_msg,
- &log_msg);
- if (rc != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
- break;
- }
+ done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
+ break;
}
/* RFC 2487 is not clear on when this command may be sent, though it
log_write(L_etrn, LOG_MAIN, "ETRN %s received from %s", smtp_cmd_argument,
host_and_ident(FALSE));
- rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn, &user_msg, &log_msg);
- if (rc != OK)
+ if ((rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn,
+ &user_msg, &log_msg)) != OK)
{
done = smtp_handle_acl_fail(ACL_WHERE_ETRN, rc, user_msg, log_msg);
break;
break;
}
etrn_command = US"exim -R";
- argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE, 2, US"-R",
- smtp_cmd_data);
+ argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE,
+ *queue_name ? 4 : 2,
+ US"-R", smtp_cmd_data,
+ US"-MCG", queue_name);
}
/* If we are host-testing, don't actually do anything. */
/* If ETRN queue runs are to be serialized, check the database to
ensure one isn't already running. */
- if (smtp_etrn_serialize && !enq_start(etrn_serialize_key))
+ if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
{
smtp_printf("458 Already processing %s\r\n", smtp_cmd_data);
break;
done = 1; /* Pretend eof - drops connection */
break;
- #ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
case PROXY_FAIL_IGNORE_CMD:
smtp_printf("503 Command refused, required Proxy negotiation failed\r\n");
break;
- #endif
+#endif
default:
if (unknown_command_count++ >= smtp_max_unknown_commands)
git://git.exim.org / users / jgh / exim.git / blobdiff