TLS fixes for OpenSSL.

[users/jgh/exim.git] / doc / doc-txt / NewStuff

diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index 559a9f4c0f7efa0cc24c99e28bf4054519e94290..b962b61a24a71481a3c3da7c19f2266827d1634a 100644 (file)
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -1,5 +1,3 @@
-$Cambridge: exim/doc/doc-txt/NewStuff,v 1.173 2010/06/07 07:09:10 pdp Exp $
-

 New Features in Exim
 --------------------
 
 New Features in Exim
 --------------------
 


@@ -8,10 +6,108 @@ Before a formal release, there may be quite a lot of detail so that people can
 test from the snapshots or the CVS before the documentation is updated. Once
 the documentation is updated, this file is reduced to a short list.
 
 test from the snapshots or the CVS before the documentation is updated. Once
 the documentation is updated, this file is reduced to a short list.
 

+Version 4.78
+------------
+
+ 1. New authenticator driver, "gsasl".  Server-only (at present).
+    This is a SASL interface, licensed under GPL, which can be found at
+    http://www.gnu.org/software/gsasl/.
+    This system does not provide sources of data for authentication, so
+    careful use needs to be made of the conditions in Exim.
+
+ 2. New authenticator driver, "heimdal_gssapi".  Server-only.
+    A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME
+    is no longer honoured for setuid programs by Heimdal.  Use the
+    "server_keytab" option to point to the keytab.
+
+ 3. The "pkg-config" system can now be used when building Exim to reference
+    cflags and library information for lookups and authenticators, rather
+    than having to update "CFLAGS", "AUTH_LIBS", "LOOKUP_INCLUDE" and
+    "LOOKUP_LIBS" directly.  Similarly for handling the TLS library support
+    without adjusting "TLS_INCLUDE" and "TLS_LIBS".
+
+ 4. New expansion variable $tls_bits.
+
+ 5. New lookup type, "dbmjz".  Key is an Exim list, the elements of which will
+    be joined together with ASCII NUL characters to construct the key to pass
+    into the DBM library.  Can be used with gsasl to access sasldb2 files as
+    used by Cyrus SASL.
+
+
+Version 4.77
+------------
+
+ 1. New options for the ratelimit ACL condition: /count= and /unique=.
+    The /noupdate option has been replaced by a /readonly option.
+
+ 2. The SMTP transport's protocol option may now be set to "smtps", to
+    use SSL-on-connect outbound.
+
+ 3. New variable $av_failed, set true if the AV scanner deferred; ie, when
+    there is a problem talking to the AV scanner, or the AV scanner running.
+
+ 4. New expansion conditions, "inlist" and "inlisti", which take simple lists
+    and check if the search item is a member of the list.  This does not
+    support named lists, but does subject the list part to string expansion.
+
+ 5. Unless the new EXPAND_LISTMATCH_RHS build option is set when Exim was
+    built, Exim no longer performs string expansion on the second string of
+    the match_* expansion conditions: "match_address", "match_domain",
+    "match_ip" & "match_local_part".  Named lists can still be used.
+
+
+Version 4.76
+------------
+
+ 1. The global option "dns_use_edns0" may be set to coerce EDNS0 usage on
+    or off in the resolver library.
+
+
+Version 4.75
+------------
+
+ 1. In addition to the existing LDAP and LDAP/SSL ("ldaps") support, there
+    is now LDAP/TLS support, given sufficiently modern OpenLDAP client
+    libraries.  The following global options have been added in support of
+    this: ldap_ca_cert_dir, ldap_ca_cert_file, ldap_cert_file, ldap_cert_key,
+    ldap_cipher_suite, ldap_require_cert, ldap_start_tls.
+
+ 2. The pipe transport now takes a boolean option, "freeze_signal", default
+    false.  When true, if the external delivery command exits on a signal then
+    Exim will freeze the message in the queue, instead of generating a bounce.
+
+ 3. Log filenames may now use %M as an escape, instead of %D (still available).
+    The %M pattern expands to yyyymm, providing month-level resolution.
+
+ 4. The $message_linecount variable is now updated for the maildir_tag option,
+    in the same way as $message_size, to reflect the real number of lines,
+    including any header additions or removals from transport.
+
+ 5. When contacting a pool of SpamAssassin servers configured in spamd_address,
+    Exim now selects entries randomly, to better scale in a cluster setup.
+
+
+Version 4.74
+------------
+
+ 1. SECURITY FIX: privilege escalation flaw fixed. On Linux (and only Linux)
+    the flaw permitted the Exim run-time user to cause root to append to
+    arbitrary files of the attacker's choosing, with the content based
+    on content supplied by the attacker.
+
+ 2. Exim now supports loading some lookup types at run-time, using your
+    platform's dlopen() functionality.  This has limited platform support
+    and the intention is not to support every variant, it's limited to
+    dlopen().  This permits the main Exim binary to not be linked against
+    all the libraries needed for all the lookup types.
+

 
 Version 4.73
 ------------
 
 
 Version 4.73
 ------------
 

+ NOTE: this version is not guaranteed backwards-compatible, please read the
+       items below carefully
+

  1. A new main configuration option, "openssl_options", is available if Exim
     is built with SSL support provided by OpenSSL.  The option allows
     administrators to specify OpenSSL options to be used on connections;
  1. A new main configuration option, "openssl_options", is available if Exim
     is built with SSL support provided by OpenSSL.  The option allows
     administrators to specify OpenSSL options to be used on connections;


@@ -23,7 +119,7 @@ Version 4.73
  2. A new pipe transport option, "permit_coredumps", may help with problem
     diagnosis in some scenarios.  Note that Exim is typically installed as
     a setuid binary, which on most OSes will inhibit coredumps by default,
  2. A new pipe transport option, "permit_coredumps", may help with problem
     diagnosis in some scenarios.  Note that Exim is typically installed as
     a setuid binary, which on most OSes will inhibit coredumps by default,

-    so that safety mechanism would have to be overriden for this option to
+    so that safety mechanism would have to be overridden for this option to

     be able to take effect.
 
  3. ClamAV 0.95 is now required for ClamAV support in Exim, unless
     be able to take effect.
 
  3. ClamAV 0.95 is now required for ClamAV support in Exim, unless


@@ -38,10 +134,14 @@ Version 4.73
 
       av_scanner = clamd:192.0.2.3 1234:local
 
 
       av_scanner = clamd:192.0.2.3 1234:local
 

+    ClamAV's ExtendedDetectionInfo response format is now handled.
+

  4. There is now a -bmalware option, restricted to admin users.  This option
     takes one parameter, a filename, and scans that file with Exim's
     malware-scanning framework.  This is intended purely as a debugging aid
     to ensure that Exim's scanning is working, not to replace other tools.
  4. There is now a -bmalware option, restricted to admin users.  This option
     takes one parameter, a filename, and scans that file with Exim's
     malware-scanning framework.  This is intended purely as a debugging aid
     to ensure that Exim's scanning is working, not to replace other tools.

+    Note that the ACL framework is not invoked, so if av_scanner references
+    ACL variables without a fallback then this will fail.

 
  5. There is a new expansion operator, "reverse_ip", which will reverse IP
     addresses; IPv4 into dotted quad, IPv6 into dotted nibble.  Examples:
 
  5. There is a new expansion operator, "reverse_ip", which will reverse IP
     addresses; IPv4 into dotted quad, IPv6 into dotted nibble.  Examples:


@@ -75,14 +175,39 @@ Version 4.73
     then henceforth you will have to maintain your own local patches to strip
     the safeties off.
 
     then henceforth you will have to maintain your own local patches to strip
     the safeties off.
 

- 8. Routers now support multiple "condition" tests, IF each router yields
-    a string which the bool{} operator recognises.  Note that this is a departure
-    from normal Router "condition" truth, requiring the stricter standard of
-    "true" that ACLS use.  This might be relaxed in a future release if there
-    is sufficient demand.
-    When debugging, bear in mind that these are internally wrapped up into
-    a longer, more complicated, string.  There's a reason that the bool{}
-    logic is a dependency.
+ 8. There is a new expansion operator, bool_lax{}.  Where bool{} uses the ACL
+    condition logic to determine truth/failure and will fail to expand many
+    strings, bool_lax{} uses the router condition logic, where most strings
+    do evaluate true.
+    Note: bool{00} is false, bool_lax{00} is true.
+
+ 9. Routers now support multiple "condition" tests,
+
+10. There is now a runtime configuration option "tcp_wrappers_daemon_name".
+    Setting this allows an admin to define which entry in the tcpwrappers
+    config file will be used to control access to the daemon.  This option
+    is only available when Exim is built with USE_TCP_WRAPPERS.  The
+    default value is set at build time using the TCP_WRAPPERS_DAEMON_NAME
+    build option.
+
+11. [POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user is now
+    the Exim run-time user, instead of root.
+
+12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and
+    is forced on.  This is mitigated by the new build option
+    TRUSTED_CONFIG_LIST which defines a list of configuration files which
+    are trusted; one per line. If a config file is owned by root and matches
+    a pathname in the list, then it may be invoked by the Exim build-time
+    user without Exim relinquishing root privileges.
+
+13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
+    trusted to supply -D<Macro[=Value]> overrides on the command-line.  Going
+    forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that
+    include the main config.  As a transition mechanism, we are temporarily
+    providing a work-around: the new build option WHITELIST_D_MACROS provides
+    a colon-separated list of macro names which may be overridden by the Exim
+    run-time user.  The values of these macros are constrained to the regex
+    ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values).

 
 
 Version 4.72
 
 
 Version 4.72