ACKNOWLEDGEMENTS update, covering a few years

[users/jgh/exim.git] / doc / doc-txt / NewStuff

diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index c25e51ba073c6af922ea133f0df589b39290960e..be8285b679dfee4be5b269a86fee738b44fb7112 100644 (file)
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -6,17 +6,40 @@ Before a formal release, there may be quite a lot of detail so that people can
 test from the snapshots or the CVS before the documentation is updated. Once
 the documentation is updated, this file is reduced to a short list.
 
 test from the snapshots or the CVS before the documentation is updated. Once
 the documentation is updated, this file is reduced to a short list.
 

-Version 4.78
+Version 4.81
+------------
+
+ 1. New command-line option -bI:sieve will list all supported sieve extensions
+    of this Exim build on standard output, one per line.
+    ManageSieve (RFC 5804) providers managing scripts for use by Exim should
+    query this to establish the correct list to include in the protocol's
+    SIEVE capability line.
+
+ 2. If the -n option is combined with the -bP option, then the name of an
+    emitted option is not output, only the value (if visible to you).
+    For instance, "exim -n -bP pid_file_path" should just emit a pathname
+    followed by a newline, and no other text.
+
+ 3. When built with SUPPORT_TLS and USE_GNUTLS, the SMTP transport driver now
+    has a "tls_dh_min_bits" option, to set the minimum acceptable number of
+    bits in the Diffie-Hellman prime offered by a server (in DH ciphersuites)
+    acceptable for security.  (Option accepted but ignored if using OpenSSL).
+    Defaults to 1024, the old value.  May be lowered only to 512, or raised as
+    far as you like.  Raising this may hinder TLS interoperability with other
+    sites and is not currently recommended.  Lowering this will permit you to
+    establish a TLS session which is not as secure as you might like.
+
+    Unless you really know what you are doing, leave it alone.
+
+
+Version 4.80

 ------------
 
  1. New authenticator driver, "gsasl".  Server-only (at present).
     This is a SASL interface, licensed under GPL, which can be found at
     http://www.gnu.org/software/gsasl/.
     This system does not provide sources of data for authentication, so
 ------------
 
  1. New authenticator driver, "gsasl".  Server-only (at present).
     This is a SASL interface, licensed under GPL, which can be found at
     http://www.gnu.org/software/gsasl/.
     This system does not provide sources of data for authentication, so

-    careful use needs to be made of the conditions in Exim.  Note that
-    this can not yet be used as a drop-in replacement for Cyrus SASL, as
-    Exim is currently unable to construct strings with embedded NULs for
-    use as keys in lookups against sasldb2.
+    careful use needs to be made of the conditions in Exim.

 
  2. New authenticator driver, "heimdal_gssapi".  Server-only.
     A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME
 
  2. New authenticator driver, "heimdal_gssapi".  Server-only.
     A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME


@@ -29,11 +52,89 @@ Version 4.78
     "LOOKUP_LIBS" directly.  Similarly for handling the TLS library support
     without adjusting "TLS_INCLUDE" and "TLS_LIBS".
 
     "LOOKUP_LIBS" directly.  Similarly for handling the TLS library support
     without adjusting "TLS_INCLUDE" and "TLS_LIBS".
 

+    In addition, setting PCRE_CONFIG=yes will query the pcre-config tool to
+    find the headers and libraries for PCRE.
+

  4. New expansion variable $tls_bits.
 
  5. New lookup type, "dbmjz".  Key is an Exim list, the elements of which will
     be joined together with ASCII NUL characters to construct the key to pass
  4. New expansion variable $tls_bits.
 
  5. New lookup type, "dbmjz".  Key is an Exim list, the elements of which will
     be joined together with ASCII NUL characters to construct the key to pass

-    into the DBM library.
+    into the DBM library.  Can be used with gsasl to access sasldb2 files as
+    used by Cyrus SASL.
+
+ 6. OpenSSL now supports TLS1.1 and TLS1.2 with OpenSSL 1.0.1.
+
+    Avoid release 1.0.1a if you can.  Note that the default value of
+    "openssl_options" is no longer "+dont_insert_empty_fragments", as that
+    increased susceptibility to attack.  This may still have interoperability
+    implications for very old clients (see version 4.31 change 37) but
+    administrators can choose to make the trade-off themselves and restore
+    compatibility at the cost of session security.
+
+ 7. Use of the new expansion variable $tls_sni in the main configuration option
+    tls_certificate will cause Exim to re-expand the option, if the client
+    sends the TLS Server Name Indication extension, to permit choosing a
+    different certificate; tls_privatekey will also be re-expanded.  You must
+    still set these options to expand to valid files when $tls_sni is not set.
+
+    The SMTP Transport has gained the option tls_sni, which will set a hostname
+    for outbound TLS sessions, and set $tls_sni too.
+
+    A new log_selector, +tls_sni, has been added, to log received SNI values
+    for Exim as a server.
+
+ 8. The existing "accept_8bitmime" option now defaults to true.  This means
+    that Exim is deliberately not strictly RFC compliant.  We're following
+    Dan Bernstein's advice in http://cr.yp.to/smtp/8bitmime.html by default.
+    Those who disagree, or know that they are talking to mail servers that,
+    even today, are not 8-bit clean, need to turn off this option.
+
+ 9. Exim can now be started with -bw (with an optional timeout, given as
+    -bw<timespec>).  With this, stdin at startup is a socket that is
+    already listening for connections.  This has a more modern name of
+    "socket activation", but forcing the activated socket to fd 0.  We're
+    interested in adding more support for modern variants.
+
+10. ${eval } now uses 64-bit values on supporting platforms.  A new "G" suffix
+    for numbers indicates multiplication by 1024^3.
+
+11. The GnuTLS support has been revamped; the three options gnutls_require_kx,
+    gnutls_require_mac & gnutls_require_protocols are no longer supported.
+    tls_require_ciphers is now parsed by gnutls_priority_init(3) as a priority
+    string, documentation for which is at:
+    http://www.gnu.org/software/gnutls/manual/html_node/Priority-Strings.html
+
+    SNI support has been added to Exim's GnuTLS integration too.
+
+    For sufficiently recent GnuTLS libraries, ${randint:..} will now use
+    gnutls_rnd(), asking for GNUTLS_RND_NONCE level randomness.
+
+12. With OpenSSL, if built with EXPERIMENTAL_OCSP, a new option tls_ocsp_file
+    is now available.  If the contents of the file are valid, then Exim will
+    send that back in response to a TLS status request; this is OCSP Stapling.
+    Exim will not maintain the contents of the file in any way: administrators
+    are responsible for ensuring that it is up-to-date.
+
+    See "experimental-spec.txt" for more details.
+
+13. ${lookup dnsdb{ }} supports now SPF record types. They are handled
+    identically to TXT record lookups.
+
+14. New expansion variable $tod_epoch_l for higher-precision time.
+
+15. New global option tls_dh_max_bits, defaulting to current value of NSS
+    hard-coded limit of DH ephemeral bits, to fix interop problems caused by
+    GnuTLS 2.12 library recommending a bit count higher than NSS supports.
+
+16. tls_dhparam now used by both OpenSSL and GnuTLS, can be path or identifier.
+    Option can now be a path or an identifier for a standard prime.
+    If unset, we use the DH prime from section 2.2 of RFC 5114, "ike23".
+    Set to "historic" to get the old GnuTLS behaviour of auto-generated DH
+    primes.
+
+17. SSLv2 now disabled by default in OpenSSL.  (Never supported by GnuTLS).
+    Use "openssl_options -no_sslv2" to re-enable support, if your OpenSSL
+    install was not built with OPENSSL_NO_SSL2 ("no-ssl2").

 
 
 Version 4.77
 
 
 Version 4.77