.section "Including TLS/SSL encryption support" "SECTinctlsssl"
.cindex "TLS" "including support for TLS"
.cindex "encryption" "including support for"
-.cindex "SUPPORT_TLS"
.cindex "OpenSSL" "building Exim with"
.cindex "GnuTLS" "building Exim with"
-Exim can be built to support encrypted SMTP connections, using the STARTTLS
-command as per RFC 2487. It can also support legacy clients that expect to
+Exim is usually built to support encrypted SMTP connections, using the STARTTLS
+command as per RFC 2487. It can also support clients that expect to
start a TLS session immediately on connection to a non-standard port (see the
&%tls_on_connect_ports%& runtime option and the &%-tls-on-connect%& command
line option).
OpenSSL or GnuTLS library. There is no cryptographic code in Exim itself for
implementing SSL.
+.new
+If you do not want TLS support you should set
+.code
+DISABLE_TLS=yes
+.endd
+in &_Local/Makefile_&.
+.wen
+
If OpenSSL is installed, you should set
.code
-SUPPORT_TLS=yes
+USE_OPENSL=yes
TLS_LIBS=-lssl -lcrypto
.endd
in &_Local/Makefile_&. You may also need to specify the locations of the
OpenSSL library and include files. For example:
.code
-SUPPORT_TLS=yes
+USE_OPENSL=yes
TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
TLS_INCLUDE=-I/usr/local/openssl/include/
.endd
.cindex "pkg-config" "OpenSSL"
If you have &'pkg-config'& available, then instead you can just use:
.code
-SUPPORT_TLS=yes
+USE_OPENSL=yes
USE_OPENSSL_PC=openssl
.endd
.cindex "USE_GNUTLS"
If GnuTLS is installed, you should set
.code
-SUPPORT_TLS=yes
USE_GNUTLS=yes
TLS_LIBS=-lgnutls -ltasn1 -lgcrypt
.endd
in &_Local/Makefile_&, and again you may need to specify the locations of the
library and include files. For example:
.code
-SUPPORT_TLS=yes
USE_GNUTLS=yes
TLS_LIBS=-L/usr/gnu/lib -lgnutls -ltasn1 -lgcrypt
TLS_INCLUDE=-I/usr/gnu/include
.cindex "pkg-config" "GnuTLS"
If you have &'pkg-config'& available, then instead you can just use:
.code
-SUPPORT_TLS=yes
USE_GNUTLS=yes
USE_GNUTLS_PC=gnutls
.endd
domains = ! +local_domains
transport = remote_smtp
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
-.ifdef _HAVE_DNSSEC
- dnssec_request_domains = *
-.endif
no_more
.endd
The &%domains%& option behaves as per smarthost, above.
remote_smtp:
driver = smtp
message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
-.ifdef _HAVE_DANE
- hosts_try_dane = *
-.endif
.ifdef _HAVE_PRDR
hosts_try_prdr = *
.endif
With &"strict"& a response from the DNS resolver that
is not labelled as authenticated data
is treated as equivalent to a temporary DNS error.
-The default is &"never"&.
+The default is &"lax"&.
See also the &$lookup_dnssec_authenticated$& variable.
&*Note*&: Under versions of OpenSSL preceding 1.1.1,
when a list of more than one
file is used for &%tls_certificate%&, this variable is not reliable.
+.new
+The macro "_TLS_BAD_MULTICERT_IN_OURCERT" will be defined for those versions.
+.wen
.vitem &$tls_in_peercert$&
.vindex "&$tls_in_peercert$&"
commands are acceptable.
When used, the pipelining saves on roundtrip times.
+See also the &%hosts_pipe_connect%& smtp transport option.
+
Currently the option name &"X_PIPE_CONNECT"& is used.
.wen
&*Note*&: Under versions of OpenSSL preceding 1.1.1,
when a list of more than one
file is used, the &$tls_in_ourcert$& variable is unreliable.
-
-&*Note*&: OCSP stapling is not usable under OpenSSL
-when a list of more than one file is used.
+.new
+The macro "_TLS_BAD_MULTICERT_IN_OURCERT" will be defined for those versions.
+.wen
If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then
if the OpenSSL build supports TLS extensions and the TLS client sends the
to be used by Exim.
.new
-&*Note: This option is ignored for GnuTLS version 3.6.0 and later.
-The library manages parameter negitiation internally.
+This option is ignored for GnuTLS version 3.6.0 and later.
+The library manages parameter negotiation internally.
.wen
&*Note: The Exim Maintainers strongly recommend,
-for other TLS braries,
+for other TLS library versions,
using a filename with site-generated
local DH parameters*&, which has been supported across all versions of Exim. The
other specific constants available are a fallback so that even when
Certificate Authority.
Usable for GnuTLS 3.4.4 or 3.3.17 or OpenSSL 1.1.0 (or later).
+.new
+The macro "_HAVE_TLS_OCSP" will be defined for those versions.
+.wen
.new
For OpenSSL 1.1.0 or later, and
for GnuTLS 3.5.6 or later the expanded value of this option can be a list
of files, to match a list given for the &%tls_certificate%& option.
The ordering of the two lists must match.
+.new
+The macro "_HAVE_TLS_OCSP_LIST" will be defined for those versions.
+.wen
.new
The file(s) should be in DER format,
-except for GnuTLS 3.6.3 or later when an optional filetype prefix
-can be used. The prefix must be one of "DER" or "PEM", followed by
+except for GnuTLS 3.6.3 or later
+or for OpenSSL,
+when an optional filetype prefix can be used.
+The prefix must be one of "DER" or "PEM", followed by
a single space. If one is used it sets the format for subsequent
files in the list; the initial format is DER.
-When a PEM format file is used it may contain multiple proofs,
-for multiple certificate chain element proofs under TLS1.3.
+If multiple proofs are wanted, for multiple chain elements
+(this only works under TLS1.3)
+they must be coded as a combined OCSP response.
+
+Although GnuTLS will accept PEM files with multiple separate
+PEM blobs (ie. separate OCSP responses), it sends them in the
+TLS Certificate record interleaved with the certificates of the chain;
+although a GnuTLS client is happy with that, an OpenSSL client is not.
.wen
.option tls_on_connect_ports main "string list" unset
unless you really, really know what you are doing. See also the generic
transport option of the same name.
-.option dnssec_request_domains routers "domain list&!!" unset
+.option dnssec_request_domains routers "domain list&!!" *
.cindex "MX record" "security"
.cindex "DNSSEC" "MX lookup"
.cindex "security" "MX lookup"
details.
-.option dnssec_request_domains smtp "domain list&!!" unset
+.option dnssec_request_domains smtp "domain list&!!" *
.cindex "MX record" "security"
.cindex "DNSSEC" "MX lookup"
.cindex "security" "MX lookup"
It also turns SMTP into a client-first protocol
so combines well with TCP Fast Open.
+See also the &%pipelining_connect_advertise_hosts%& main option.
+
Note:
When the facility is used, the transport &%helo_data%& option
will be expanded before the &$sending_ip_address$& variable
.code
USE_GNUTLS=yes
.endd
-in Local/Makefile, in addition to
-.code
-SUPPORT_TLS=yes
-.endd
-You must also set TLS_LIBS and TLS_INCLUDE appropriately, so that the
+in Local/Makefile
+you must also set TLS_LIBS and TLS_INCLUDE appropriately, so that the
include files and libraries for GnuTLS can be found.
There are some differences in usage when using GnuTLS instead of OpenSSL:
If DANE is not usable, whether requested or not, and CA-anchored
verification evaluation is wanted, the above variables should be set appropriately.
-Currently the (router or transport options) &%dnssec_request_domains%& must be active and &%dnssec_require_domains%& is ignored.
+The router and transport option &%dnssec_request_domains%& must not be
+set to "never" and &%dnssec_require_domains%& is ignored.
If verification was successful using DANE then the "CV" item in the delivery log line will show as "CV=dane".
git://git.exim.org / users / jgh / exim.git / blobdiff