.book
. /////////////////////////////////////////////////////////////////////////////
-. These definitions set some parameters and save some typing. Remember that
-. the <bookinfo> element must also be updated for each new edition.
+. These definitions set some parameters and save some typing.
+. Update the Copyright year (only) when changing content.
. /////////////////////////////////////////////////////////////////////////////
.set previousversion "4.80"
-.set version "4.80"
+.include ./local_params
.set ACL "access control lists (ACLs)"
.set I " "
+.macro copyyear
+2012
+.endmacro
. /////////////////////////////////////////////////////////////////////////////
. Additional xfpt markup used by this document, over and above the default
<bookinfo>
<title>Specification of the Exim Mail Transfer Agent</title>
<titleabbrev>The Exim MTA</titleabbrev>
-<date>17 May 2012</date>
+<date>
+.fulldate
+</date>
<author><firstname>Exim</firstname><surname>Maintainers</surname></author>
<authorinitials>EM</authorinitials>
<revhistory><revision>
- <revnumber>4.80</revnumber>
- <date>17 May 2012</date>
+ <revnumber>
+.version
+ </revnumber>
+ <date>
+.fulldate
+ </date>
<authorinitials>EM</authorinitials>
</revision></revhistory>
-<copyright><year>2012</year><holder>University of Cambridge</holder></copyright>
+<copyright><year>
+.copyyear
+ </year><holder>University of Cambridge</holder></copyright>
</bookinfo>
.literal off
.new
.cindex "documentation"
-This edition of the Exim specification applies to version &version; of Exim.
+This edition of the Exim specification applies to version &version() of Exim.
Substantive changes from the &previousversion; edition are marked in some
renditions of the document; this paragraph is so marked if the rendition is
capable of showing a change indicator.
.cindex "incorporated code"
.cindex "regular expressions" "library"
.cindex "PCRE"
+.cindex "OpenDMARC"
A number of pieces of external code are included in the Exim distribution.
.ilist
SOFTWARE.
.endblockquote
+.next
+.cindex "opendmarc" "acknowledgment"
+The DMARC implementation uses the OpenDMARC library which is Copyrighted by
+The Trusted Domain Project. Portions of Exim source which use OpenDMARC
+derived code are indicated in the respective source files. The full OpenDMARC
+license is provided in the LICENSE.opendmarc file contained in the distributed
+source code.
+
.next
Many people have contributed code fragments, some large, some small, that were
not covered by any specific licence requirements. It is assumed that the
.section "Unpacking" "SECID23"
Exim is distributed as a gzipped or bzipped tar file which, when unpacked,
creates a directory with the name of the current release (for example,
-&_exim-&version;_&) into which the following files are placed:
+&_exim-&version()_&) into which the following files are placed:
.table2 140pt
.irow &_ACKNOWLEDGMENTS_& "contains some acknowledgments"
For the utility programs, old versions are renamed by adding the suffix &_.O_&
to their names. The Exim binary itself, however, is handled differently. It is
installed under a name that includes the version number and the compile number,
-for example &_exim-&version;-1_&. The script then arranges for a symbolic link
+for example &_exim-&version()-1_&. The script then arranges for a symbolic link
called &_exim_& to point to the binary. If you are updating a previous version
of Exim, the script takes care to ensure that the name &_exim_& is never absent
from the directory (as seen by other processes).
It sets the incoming protocol and host name (for trusted callers). The
host name and its colon can be omitted when only the protocol is to be set.
Note the Exim already has two private options, &%-pd%& and &%-ps%&, that refer
-to embedded Perl. It is therefore impossible to set a protocol value of &`p`&
+to embedded Perl. It is therefore impossible to set a protocol value of &`d`&
or &`s`& using this option (but that does not seem a real limitation).
.vitem &%-q%&
be useful for processing the output of the MD5 and SHA-1 hashing functions.
+
+.vitem &*${hexquote:*&<&'string'&>&*}*&
+.cindex "quoting" "hex-encoded unprintable characters"
+.cindex "&%hexquote%& expansion item"
+This operator converts non-printable characters in a string into a hex
+escape form. Byte values between 33 (!) and 126 (~) inclusive are left
+as is, and other byte values are converted to &`\xNN`&, for example a
+byt value 127 is converted to &`\x7f`&.
+
+
.vitem &*${lc:*&<&'string'&>&*}*&
.cindex "case forcing in strings"
.cindex "string" "case forcing"
The value of &$item$& is saved and restored while &*forany*& or &*forall*& is
being processed, to enable these expansion items to be nested.
+To scan a named list, expand it with the &*listnamed*& operator.
+
.vitem &*ge&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
&*gei&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
.vindex "&$return_size_limit$&"
This is an obsolete name for &$bounce_return_size_limit$&.
+.vitem &$router_name$&
+.cindex "router" "name"
+.cindex "name" "of router"
+.vindex "&$router_name$&"
+During the running of a router this variable contains its name.
+
.vitem &$runrc$&
.cindex "return code" "from &%run%& expansion"
.vindex "&$runrc$&"
This variable contains the UTC date and time in &"Zulu"& format, as specified
by ISO 8601, for example: 20030221154023Z.
+.vitem &$transport_name$&
+.cindex "transport" "name"
+.cindex "name" "of transport"
+.vindex "&$transport_name$&"
+During the running of a transport, this variable contains its name.
+
.vitem &$value$&
.vindex "&$value$&"
This variable contains the result of an expansion lookup, extraction operation,
See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
+A forced expansion failure or setting to an empty string is equivalent to
+being unset.
+
.option tls_verify_hosts main "host list&!!" unset
.cindex "TLS" "client certificate verification"
.option debug_print routers string&!! unset
.cindex "testing" "variables in drivers"
If this option is set and debugging is enabled (see the &%-d%& command line
-option), the string is expanded and included in the debugging output.
+option) or in address-testing mode (see the &%-bt%& command line option),
+the string is expanded and included in the debugging output.
If expansion of the string fails, the error message is written to the debugging
output, and Exim carries on processing.
This option is provided to help with checking out the values of variables and
variables it references. The output happens after checks for &%domains%&,
&%local_parts%&, and &%check_local_user%& but before any other preconditions
are tested. A newline is added to the text if it does not end with one.
+The variable &$router_name$& contains the name of the router.
option is not working properly, &%debug_print%& could be used to output the
variables it references. A newline is added to the text if it does not end with
one.
+The variables &$transport_name$& and &$router_name$& contain the name of the
+transport and the router that called it.
.option delivery_date_add transports boolean false
.vindex "&$address_pipe$&"
A router redirects an address directly to a pipe command (for example, from an
alias or forward file). In this case, &$address_pipe$& contains the text of the
-pipe command, and the &%command%& option on the transport is ignored. If only
-one address is being transported (&%batch_max%& is not greater than one, or
-only one address was redirected to this pipe command), &$local_part$& contains
-the local part that was redirected.
+pipe command, and the &%command%& option on the transport is ignored unless
+&%force_command%& is set. If only one address is being transported
+(&%batch_max%& is not greater than one, or only one address was redirected to
+this pipe command), &$local_part$& contains the local part that was redirected.
.endlist
avoids any problems with spaces or shell metacharacters, and is of use when a
&(pipe)& transport is handling groups of addresses in a batch.
+If &%force_command%& is enabled on the transport, Special handling takes place
+for an argument that consists of precisely the text &`$address_pipe`&. It
+is handled similarly to &$pipe_addresses$& above. It is expanded and each
+argument is inserted in the argument list at that point
+&'as a separate argument'&. The &`$address_pipe`& item does not need to be
+the only item in the argument; in fact, if it were then &%force_command%&
+should behave as a no-op. Rather, it should be used to adjust the command
+run while preserving the argument vector separation.
+
After splitting up into arguments and expansion, the resulting command is run
in a subprocess directly from the transport, &'not'& under a shell. The
message that is being delivered is supplied on the standard input, and the
frozen in Exim's queue instead.
+.option force_command pipe boolean false
+.cindex "force command"
+.cindex "&(pipe)& transport", "force command"
+Normally when a router redirects an address directly to a pipe command
+the &%command%& option on the transport is ignored. If &%force_command%&
+is set, the &%command%& option will used. This is especially
+useful for forcing a wrapper or additional argument to be added to the
+command. For example:
+.code
+command = /usr/bin/remote_exec myhost -- $address_pipe
+force_command
+.endd
+
+Note that &$address_pipe$& is handled specially in &%command%& when
+&%force_command%& is set, expanding out to the original argument vector as
+separate items, similarly to a Unix shell &`"$@"`& construct.
+
.option ignore_status pipe boolean false
If this option is true, the status returned by the subprocess that is set up to
run the command is ignored, and Exim behaves as if zero had been returned.
.cindex "&%set%& ACL modifier"
This modifier puts a value into one of the ACL variables (see section
&<<SECTaclvariables>>&).
+
+
+.vitem &*udpsend*&&~=&~<&'parameters'&>
+This modifier sends a UDP packet, for purposes such as statistics
+collection or behaviour monitoring. The parameters are expanded, and
+the result of the expansion must be a colon-separated list consisting
+of a destination server, port number, and the packet contents. The
+server can be specified as a host name or IPv4 or IPv6 address. The
+separator can be changed with the usual angle bracket syntax. For
+example, you might want to collect information on which hosts connect
+when:
+.code
+udpsend = <; 2001:dB8::dead:beef ; 1234 ;\
+ $tod_zulu $sender_host_address
+.endd
.endlist
LHLO is used instead of HELO if the transport's &%protocol%& option is
set to &"lmtp"&.
+The callout may use EHLO, AUTH and/or STARTTLS given appropriate option
+settings.
+
A recipient callout check is similar. By default, it also uses an empty address
for the sender. This default is chosen because most hosts do not make use of
the sender address when verifying a recipient. Using the same address means
A summary of the field identifiers that are used in log lines is shown in
the following table:
.display
-&`A `& authenticator name (and optional id)
+&`A `& authenticator name (and optional id and sender)
&`C `& SMTP confirmation on delivery
&` `& command list for &"no mail in SMTP session"&
&`CV `& certificate verification status
&`*smtp_confirmation `& SMTP confirmation on => lines
&` smtp_connection `& SMTP connections
&` smtp_incomplete_transaction`& incomplete SMTP transactions
+&` smtp_mailauth `& AUTH argument to MAIL commands
&` smtp_no_mail `& session with no MAIL commands
&` smtp_protocol_error `& SMTP protocol errors
&` smtp_syntax_error `& SMTP syntax errors
setting of 10 for &%smtp_accep_max_nonmail%&, the connection will in any case
have been aborted before 20 non-mail commands are processed.
.next
+&%smtp_mailauth%&: A third subfield with the authenticated sender,
+colon-separated, is appended to the A= item for a message arrival or delivery
+log line, if an AUTH argument to the SMTP MAIL command (see &<<SECTauthparamail>>&)
+was accepted or used.
+.next
.cindex "log" "SMTP protocol error"
.cindex "SMTP" "logging protocol error"
&%smtp_protocol_error%&: A log line is written for every SMTP protocol error
+.section "Running local commands" "SECTsecconslocalcmds"
+There are a number of ways in which an administrator can configure Exim to run
+commands based upon received, untrustworthy, data. Further, in some
+configurations a user who can control a &_.forward_& file can also arrange to
+run commands. Configuration to check includes, but is not limited to:
+
+.ilist
+Use of &%use_shell%& in the pipe transport: various forms of shell command
+injection may be possible with this option present. It is dangerous and should
+be used only with considerable caution. Consider constraints which whitelist
+allowed characters in a variable which is to be used in a pipe transport that
+has &%use_shell%& enabled.
+.next
+A number of options such as &%forbid_filter_run%&, &%forbid_filter_perl%&,
+&%forbid_filter_dlfunc%& and so forth which restrict facilities available to
+&_.forward_& files in a redirect router. If Exim is running on a central mail
+hub to which ordinary users do not have shell access, but home directories are
+NFS mounted (for instance) then administrators should review the list of these
+forbid options available, and should bear in mind that the options that may
+need forbidding can change as new features are added between releases.
+.next
+The &%${run...}%& expansion item does not use a shell by default, but
+administrators can configure use of &_/bin/sh_& as part of the command.
+Such invocations should be viewed with prejudicial suspicion.
+.next
+Administrators who use embedded Perl are advised to explore how Perl's
+taint checking might apply to their usage.
+.next
+Use of &%${expand...}%& is somewhat analagous to shell's eval builtin and
+administrators are well advised to view its use with suspicion, in case (for
+instance) it allows a local-part to contain embedded Exim directives.
+.next
+Use of &%${match_local_part...}%& and friends becomes more dangerous if
+Exim was built with EXPAND_LISTMATCH_RHS defined: the second string in
+each can reference arbitrary lists and files, rather than just being a list
+of opaque strings.
+The EXPAND_LISTMATCH_RHS option was added and set false by default because of
+real-world security vulnerabilities caused by its use with untrustworthy data
+injected in, for SQL injection attacks.
+Consider the use of the &%inlisti%& expansion condition instead.
+.endlist
+
+
+
.section "IPv4 source routing" "SECID272"
.cindex "source routing" "in IP packets"
.cindex "IP source routing"
Edit &_src/drtables.c_&, adding conditional code to pull in the private header
and create a table entry as is done for all the other drivers and lookup types.
.next
+Edit &_scripts/lookups-Makefile_& if this is a new lookup; there is a for-loop
+near the bottom, ranging the &`name_mod`& variable over a list of all lookups.
+Add your &`NEWDRIVER`& to that list.
+As long as the dynamic module would be named &_newdriver.so_&, you can use the
+simple form that most lookups have.
+.next
Edit &_Makefile_& in the appropriate sub-directory (&_src/routers_&,
&_src/transports_&, &_src/auths_&, or &_src/lookups_&); add a line for the new
driver or lookup type and add it to the definition of OBJ.
git://git.exim.org / users / jgh / exim.git / blobdiff