bug-fix test-driving input

[users/jgh/exim.git] / doc / doc-txt / NewStuff

diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index 2e060cce2804dc27a82ef1eb7c77f41a23ae32b2..dd70201e5e22a01b7b995725b6c63722a33c7dbb 100644 (file)
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -3,9 +3,15 @@ New Features in Exim
 
 This file contains descriptions of new features that have been added to Exim.
 Before a formal release, there may be quite a lot of detail so that people can
 
 This file contains descriptions of new features that have been added to Exim.
 Before a formal release, there may be quite a lot of detail so that people can

-test from the snapshots or the CVS before the documentation is updated. Once
+test from the snapshots or the Git before the documentation is updated. Once

 the documentation is updated, this file is reduced to a short list.
 
 the documentation is updated, this file is reduced to a short list.
 

+Version 4.89
+------------
+
+ 1. Allow relative config file names for ".include"
+
+

 Version 4.88
 ------------
 
 Version 4.88
 ------------
 


@@ -21,7 +27,7 @@ Version 4.88
     N can be 224, 256 (default), 384, 512.
     With GnuTLS 3.5.0 or later, only.
 
     N can be 224, 256 (default), 384, 512.
     With GnuTLS 3.5.0 or later, only.
 

- 5. Facility for named queues:  A commandline argument can specify
+ 5. Facility for named queues:  A command-line argument can specify

     the queue name for a queue operation, and an ACL modifier can set
     the queue to be used for a message.  A $queue_name variable gives
     visibility.
     the queue name for a queue operation, and an ACL modifier can set
     the queue to be used for a message.  A $queue_name variable gives
     visibility.


@@ -39,7 +45,7 @@ Version 4.88
 
 10. Feature macros, generated from compile options.  All start with "_HAVE_"
     and go on with some roughly recognisable name.  Driver macros, for
 
 10. Feature macros, generated from compile options.  All start with "_HAVE_"
     and go on with some roughly recognisable name.  Driver macros, for

-    router, transport and authentication drivers; names starting with "_DRVR_".
+    router, transport and authentication drivers; names starting with "_DRIVER_".

     Option macros, for each configuration-file option; all start with "_OPT_".
     Use the "-bP macros" command-line option to see what is present.
 
     Option macros, for each configuration-file option; all start with "_OPT_".
     Use the "-bP macros" command-line option to see what is present.
 


@@ -51,6 +57,20 @@ Version 4.88
 
 13. New built-in constants available for tls_dhparam and default changed.
 
 
 13. New built-in constants available for tls_dhparam and default changed.
 

+14. If built with EXPERIMENTAL_QUEUEFILE, a queuefile transport, for writing
+    out copies of the message spool files for use by 3rd-party scanners.
+
+15. A new option on the smtp transport, hosts_try_fastopen.  If the system
+    supports it (on Linux it must be enabled in the kernel by the sysadmin)
+    try to use RFC 7413 "TCP Fast Open".  No data is sent on the SYN segment
+    but it permits a peer that also supports the facility to send its SMTP
+    banner immediately after the SYN,ACK segment rather then waiting for
+    another ACK - so saving up to one roundtrip time.  Because it requires
+    previous communication with the peer (we save a cookie from it) this
+    will only become active on frequently-contacted destinations.
+
+16. A new syslog_pid option to suppress PID duplication in syslog lines.
+

 
 Version 4.87
 ------------
 
 Version 4.87
 ------------


@@ -78,7 +98,7 @@ Version 4.87
     synonym of the latter).  Add support in base64 for certificates.
 
  8. New main configuration option "bounce_return_linesize_limit" to
     synonym of the latter).  Add support in base64 for certificates.
 
  8. New main configuration option "bounce_return_linesize_limit" to

-    avoid oversize bodies in bounces. The dafault value matches RFC
+    avoid oversize bodies in bounces. The default value matches RFC

     limits.
 
  9. New $initial_cwd expansion variable.
     limits.
 
  9. New $initial_cwd expansion variable.


@@ -98,7 +118,7 @@ Version 4.86
 
  5. Assorted options on malware= and spam= scanners.
 
 
  5. Assorted options on malware= and spam= scanners.
 

- 6. A commandline option to write a comment into the logfile.
+ 6. A command-line option to write a comment into the logfile.

 
  7. If built with EXPERIMENTAL_SOCKS feature enabled, the smtp transport can
     be configured to make connections via socks5 proxies.
 
  7. If built with EXPERIMENTAL_SOCKS feature enabled, the smtp transport can
     be configured to make connections via socks5 proxies.


@@ -126,7 +146,7 @@ Version 4.85
 ------------
 
  1. If built with EXPERIMENTAL_DANE feature enabled, Exim will follow the
 ------------
 
  1. If built with EXPERIMENTAL_DANE feature enabled, Exim will follow the

-    DANE smtp draft to assess a secure chain of trust of the certificate
+    DANE SMTP draft to assess a secure chain of trust of the certificate

     used to establish the TLS connection based on a TLSA record in the
     domain of the sender.
 
     used to establish the TLS connection based on a TLSA record in the
     domain of the sender.
 


@@ -193,7 +213,7 @@ Version 4.83
 12. OCSP stapling is now supported by default.
 
 13. If built with the EXPERIMENTAL_DSN feature enabled, Exim will output
 12. OCSP stapling is now supported by default.
 
 13. If built with the EXPERIMENTAL_DSN feature enabled, Exim will output

-    Delivery Status Notification messages in MIME format, and negociate
+    Delivery Status Notification messages in MIME format, and negotiate

     DSN features per RFC 3461.
 
 
     DSN features per RFC 3461.
 
 


@@ -248,20 +268,20 @@ Version 4.82
     ignored.
 
  7. New cutthrough routing feature.  Requested by a "control = cutthrough_delivery"
     ignored.
 
  7. New cutthrough routing feature.  Requested by a "control = cutthrough_delivery"

-    ACL modifier; works for single-recipient mails which are recieved on and
+    ACL modifier; works for single-recipient mails which are received on and

     deliverable via SMTP.  Using the connection made for a recipient verify,
     if requested before the verify, or a new one made for the purpose while
     the inbound connection is still active.  The bulk of the mail item is copied
     direct from the inbound socket to the outbound (as well as the spool file).
     When the source notifies the end of data, the data acceptance by the destination
     deliverable via SMTP.  Using the connection made for a recipient verify,
     if requested before the verify, or a new one made for the purpose while
     the inbound connection is still active.  The bulk of the mail item is copied
     direct from the inbound socket to the outbound (as well as the spool file).
     When the source notifies the end of data, the data acceptance by the destination

-    is negociated before the acceptance is sent to the source.  If the destination
+    is negotiated before the acceptance is sent to the source.  If the destination

     does not accept the mail item, for example due to content-scanning, the item
     is not accepted from the source and therefore there is no need to generate
     a bounce mail.  This is of benefit when providing a secondary-MX service.
     The downside is that delays are under the control of the ultimate destination
     system not your own.
 
     does not accept the mail item, for example due to content-scanning, the item
     is not accepted from the source and therefore there is no need to generate
     a bounce mail.  This is of benefit when providing a secondary-MX service.
     The downside is that delays are under the control of the ultimate destination
     system not your own.
 

-    The Recieved-by: header on items delivered by cutthrough is generated
+    The Received-by: header on items delivered by cutthrough is generated

     early in reception rather than at the end; this will affect any timestamp
     included.  The log line showing delivery is recorded before that showing
     reception; it uses a new ">>" tag instead of "=>".
     early in reception rather than at the end; this will affect any timestamp
     included.  The log line showing delivery is recorded before that showing
     reception; it uses a new ">>" tag instead of "=>".


@@ -322,7 +342,7 @@ Version 4.82
 16. New authenticated_sender logging option, adding to log field "A".
 
 17. New expansion variables $router_name and $transport_name.  Useful
 16. New authenticated_sender logging option, adding to log field "A".
 
 17. New expansion variables $router_name and $transport_name.  Useful

-    particularly for debug_print as -bt commandline option does not
+    particularly for debug_print as -bt command-line option does not

     require privilege whereas -d does.
 
 18. If built with EXPERIMENTAL_PRDR, per-recipient data responses per a
     require privilege whereas -d does.
 
 18. If built with EXPERIMENTAL_PRDR, per-recipient data responses per a


@@ -346,7 +366,7 @@ Version 4.82
     provided to the authentication method which failed.  It is available
     for use in subsequent ACL processing (typically quit or notquit ACLs).
 
     provided to the authentication method which failed.  It is available
     for use in subsequent ACL processing (typically quit or notquit ACLs).
 

-23. New ACL modifer "udpsend" can construct a UDP packet to send to a given
+23. New ACL modifier "udpsend" can construct a UDP packet to send to a given

     UDP host and port.
 
 24. New ${hexquote:..string..} expansion operator converts non-printable
     UDP host and port.
 
 24. New ${hexquote:..string..} expansion operator converts non-printable