Call initgroups() when dropping privilege, in order that Exim runs with

[users/jgh/exim.git] / test / runtest

diff --git a/test/runtest b/test/runtest
index d5a161234dc855aa534f5c6660987ce8f3e87a5f..397ea474d49bf72aaade097c2feebd5838548491 100755 (executable)
--- a/test/runtest
+++ b/test/runtest
@@ -1,6 +1,6 @@
 #! /usr/bin/perl -w
 
-# $Cambridge: exim/test/runtest,v 1.4 2006/02/10 16:29:20 ph10 Exp $
+# $Cambridge: exim/test/runtest,v 1.10 2006/04/28 13:46:36 ph10 Exp $
 
 ###############################################################################
 # This is the controlling script for the "new" test suite for Exim. It should #
@@ -23,7 +23,7 @@ use Socket;
 
 # Start by initializing some global variables
 
-$testversion = "4.61 (06-Feb-06)";
+$testversion = "4.62 (20-Apr-06)";
 
 $cf = "bin/cf";
 $cr = "\r";
@@ -526,6 +526,8 @@ while(<IN>)
   s/host\s\Q$parm_ipv6\E\s\[\Q$parm_ipv6\E\]/host ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6 [ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6]/;
   s/\b\Q$parm_ipv4\E\b/ip4.ip4.ip4.ip4/g;
   s/\b\Q$parm_ipv6\E\b/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
+  s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;
+  s/\b\Q$parm_ipv6r\E\b/ip6-reverse/g;
 
 
   # ======== Test network IP addresses ========
@@ -613,7 +615,7 @@ while(<IN>)
   s/\b\d+\.H\d+P\d+\b/dddddddddd.HddddddPddddd/;
 
   # Maildirsize data
-  if (/^\d+S,\d+C\s*$/)
+  while (/^\d+S,\d+C\s*$/)
     {
     print MUNGED;
     while (<IN>)
@@ -623,6 +625,7 @@ while(<IN>)
       }
     last if !defined $_;
     }
+  last if !defined $_;
 
 
   # ======== Output from the "fd" program about open descriptors ========
@@ -648,9 +651,11 @@ while(<IN>)
 
   if ($is_stdout)
     {
-    # Skip translate_ip_address in -bP output because it ain't always there
+    # Skip translate_ip_address and use_classresources in -bP output because
+    # they aren't always there.
 
     next if /translate_ip_address =/;
+    next if /use_classresources/;
 
     # In certain filter tests, remove initial filter lines because they just
     # clog up by repetition.
@@ -2109,30 +2114,74 @@ if (defined $parm_support{'Content_Scanning'})
         }
       }
 
+    # Read the ClamAV configuration file and find the socket interface.
+
     if ($clamconf ne "")
       {
+      my $socket_domain;
       open(IN, "$clamconf") || die "\n** Unable to open $clamconf: $!\n";
       while (<IN>)
         {
         if (/^LocalSocket\s+(.*)/)
           {
           $parm_clamsocket = $1;
+          $socket_domain = AF_UNIX;
           last;
           }
+        if (/^TCPSocket\s+(\d+)/)
+          {
+          if (defined $parm_clamsocket)
+            {
+            $parm_clamsocket .= " $1";
+            $socket_domain = AF_INET;
+            last;
+            }
+          else
+            {
+            $parm_clamsocket = " $1";
+            }
+          }
+        elsif (/^TCPAddr\s+(\S+)/)
+          {
+          if (defined $parm_clamsocket)
+            {
+            $parm_clamsocket = $1 . $parm_clamsocket;
+            $socket_domain = AF_INET;
+            last;
+            }
+          else
+            {
+            $parm_clamsocket = $1;
+            }
+          }
         }
       close(IN);
-      if (-e $parm_clamsocket)
+
+      if (defined $socket_domain)
         {
         print ":\n  The clamd socket is $parm_clamsocket\n";
         # This test for an active ClamAV is courtesy of Daniel Tiefnig.
         eval
           {
-          my $sun = sockaddr_un($parm_clamsocket) or die "** Failed packing '$parm_clamsocket'\n";
-          socket(SOCK, AF_UNIX, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
-
+          my $socket;
+          if ($socket_domain == AF_UNIX)
+            {
+            $socket = sockaddr_un($parm_clamsocket) or die "** Failed packing '$parm_clamsocket'\n";
+            }
+          elsif ($socket_domain == AF_INET)
+            {
+            my ($ca_host, $ca_port) = split(/\s+/,$parm_clamsocket);
+            my $ca_hostent = gethostbyname($ca_host) or die "** Failed to get raw address for host '$ca_host'\n";
+            $socket = sockaddr_in($ca_port, $ca_hostent) or die "** Failed packing '$parm_clamsocket'\n";
+            }
+          else
+            {
+            die "** Unknown socket domain '$socket_domain' (should not happen)\n";
+            }
+          socket(SOCK, $socket_domain, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
           local $SIG{ALRM} = sub { die "** Timeout while connecting to socket '$parm_clamsocket'\n"; };
           alarm(5);
-          connect(SOCK, $sun) or die "** Unable to connect to socket '$parm_clamsocket'\n";
+          connect(SOCK, $socket) or die "** Unable to connect to socket '$parm_clamsocket'\n";
           alarm(0);
 
           my $ofh = select SOCK; $| = 1; select $ofh;
@@ -2160,7 +2209,7 @@ if (defined $parm_support{'Content_Scanning'})
         }
       else
         {
-        print ", but the socket for clamd does not exist\n";
+        print ", but the socket for clamd could not be determined\n";
         print "Assume ClamAV is not running\n";
         }
       }
@@ -2357,6 +2406,24 @@ else
 print "IPv4 address is $parm_ipv4\n";
 print "IPv6 address is $parm_ipv6\n";
 
+# For munging test output, we need the reversed IP addresses.
+
+$parm_ipv4r = ($parm_ipv4 !~ /^\d/)? "" :
+  join(".", reverse(split /\./, $parm_ipv4));
+
+$parm_ipv6r = "";
+if ($parm_ipv6 =~ /^[\da-f]/)
+  {
+  my(@comps) = split /:/, $parm_ipv6;
+  my(@nibbles);
+  foreach $comp (@comps)
+    {
+    push @nibbles, sprintf("%lx", hex($comp) >> 8);
+    push @nibbles, sprintf("%lx", hex($comp) & 0xff);
+    }
+  $parm_ipv6r = join(".", reverse(@nibbles));
+  }
+
 # Find the host name, fully qualified.
 
 chomp($temp = `hostname`);
@@ -2512,12 +2579,25 @@ opendir(DIR, "scripts") || tests_exit(-1, "Failed to opendir(\"scripts\"): $!");
 @test_dirs = sort readdir(DIR);
 closedir(DIR);
 
+# Remove . and .. and CVS from the list.
+
+for ($i = 0; $i < @test_dirs; $i++)
+  {
+  my($d) = $test_dirs[$i];
+  if ($d eq "." || $d eq ".." || $d eq "CVS")
+    {
+    splice @test_dirs, $i, 1;
+    $i--;
+    }
+  }
+
+# Scan for relevant tests
+
 for ($i = 0; $i < @test_dirs; $i++)
   {
   my($testdir) = $test_dirs[$i];
   my($wantthis) = 1;
 
-  next if $testdir eq "." || $testdir eq "..";
   print ">>Checking $testdir\n" if $debug;
 
   # Skip this directory if the first test is equal or greater than the first