* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2016 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions for handling an incoming SMTP call. */
we need room to handle large base64-encoded AUTHs for GSSAPI.
*/
-#define smtp_cmd_buffer_size 16384
+#define SMTP_CMD_BUFFER_SIZE 16384
/* Size of buffer for reading SMTP incoming packets */
-#define in_buffer_size 8192
+#define IN_BUFFER_SIZE 8192
/* Structure for SMTP command list */
ETRN_CMD, /* This by analogy with TURN from the RFC */
STARTTLS_CMD, /* Required by the STARTTLS RFC */
TLS_AUTH_CMD, /* auto-command at start of SSL */
- BDAT_CMD, /* Implied by RFC3030 "After all MAIL and..." */
/* This is a dummy to identify the non-sync commands when pipelining */
NON_SYNC_CMD_NON_PIPELINING,
+ /* RFC3030 section 2: "After all MAIL and RCPT responses are collected and
+ processed the message is sent using a series of BDAT commands"
+ implies that BDAT should be synchronized. However, we see Google, at least,
+ sending MAIL,RCPT,BDAT-LAST in a single packet, clearly not waiting for
+ processing of the RCPT response(s). We shall do the same, and not require
+ synch for BDAT. Worse, as the chunk may (very likely will) follow the
+ command-header in the same packet we cannot do the usual "is there any
+ follow-on data after the command line" even for non-pipeline mode.
+ So we'll need an explicit check after reading the expected chunk amount
+ when non-pipe, before sending the ACK. */
+
+ BDAT_CMD,
+
/* I have been unable to find a statement about the use of pipelining
with AUTH, so to be on the safe side it is here, though I kind of feel
it should be up there with the synchronized commands. */
{ "auth", sizeof("auth")-1, AUTH_CMD, TRUE, TRUE },
#ifdef SUPPORT_TLS
{ "starttls", sizeof("starttls")-1, STARTTLS_CMD, FALSE, FALSE },
- { "tls_auth", 0, TLS_AUTH_CMD, FALSE, TRUE },
+ { "tls_auth", 0, TLS_AUTH_CMD, FALSE, FALSE },
#endif
/* If you change anything above here, also fix the definitions below. */
static int smtp_had_error;
+/* forward declarations */
+static int smtp_read_command(BOOL check_sync, unsigned buffer_lim);
+static int synprot_error(int type, int code, uschar *data, uschar *errmess);
+static void smtp_quit_handler(uschar **, uschar **);
+static void smtp_rset_handler(void);
+
+/*************************************************
+* Recheck synchronization *
+*************************************************/
+
+/* Synchronization checks can never be perfect because a packet may be on its
+way but not arrived when the check is done. Normally, the checks happen when
+commands are read: Exim ensures that there is no more input in the input buffer.
+In normal cases, the response to the command will be fast, and there is no
+further check.
+
+However, for some commands an ACL is run, and that can include delays. In those
+cases, it is useful to do another check on the input just before sending the
+response. This also applies at the start of a connection. This function does
+that check by means of the select() function, as long as the facility is not
+disabled or inappropriate. A failure of select() is ignored.
+
+When there is unwanted input, we read it so that it appears in the log of the
+error.
+
+Arguments: none
+Returns: TRUE if all is well; FALSE if there is input pending
+*/
+
+static BOOL
+wouldblock_reading(void)
+{
+int fd, rc;
+fd_set fds;
+struct timeval tzero;
+
+#ifdef SUPPORT_TLS
+if (tls_in.active >= 0)
+ return !tls_could_read();
+#endif
+
+if (smtp_inptr < smtp_inend)
+ return FALSE;
+
+fd = fileno(smtp_in);
+FD_ZERO(&fds);
+FD_SET(fd, &fds);
+tzero.tv_sec = 0;
+tzero.tv_usec = 0;
+rc = select(fd + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tzero);
+
+if (rc <= 0) return TRUE; /* Not ready to read */
+rc = smtp_getc(GETC_BUFFER_UNLIMITED);
+if (rc < 0) return TRUE; /* End of file or error */
+
+smtp_ungetc(rc);
+return FALSE;
+}
+
+static BOOL
+check_sync(void)
+{
+if (!smtp_enforce_sync || !sender_host_address || sender_host_notsocket)
+ return TRUE;
+
+return wouldblock_reading();
+}
+
+
+/* If there's input waiting (and we're doing pipelineing) then we can pipeline
+a reponse with the one following. */
+
+static BOOL
+pipeline_response(void)
+{
+if ( !smtp_enforce_sync || !sender_host_address
+ || sender_host_notsocket || !pipelining_advertised)
+ return FALSE;
+
+return !wouldblock_reading();
+}
+
+
+
+/*************************************************
+* Log incomplete transactions *
+*************************************************/
+
+/* This function is called after a transaction has been aborted by RSET, QUIT,
+connection drops or other errors. It logs the envelope information received
+so far in order to preserve address verification attempts.
+
+Argument: string to indicate what aborted the transaction
+Returns: nothing
+*/
+
+static void
+incomplete_transaction_log(uschar *what)
+{
+if (sender_address == NULL || /* No transaction in progress */
+ !LOGGING(smtp_incomplete_transaction))
+ return;
+
+/* Build list of recipients for logging */
+
+if (recipients_count > 0)
+ {
+ int i;
+ raw_recipients = store_get(recipients_count * sizeof(uschar *));
+ for (i = 0; i < recipients_count; i++)
+ raw_recipients[i] = recipients_list[i].address;
+ raw_recipients_count = recipients_count;
+ }
+
+log_write(L_smtp_incomplete_transaction, LOG_MAIN|LOG_SENDER|LOG_RECIPIENTS,
+ "%s incomplete transaction (%s)", host_and_ident(TRUE), what);
+}
+
+
+
+
+/* Refill the buffer, and notify DKIM verification code.
+Return false for error or EOF.
+*/
+
+static BOOL
+smtp_refill(unsigned lim)
+{
+int rc, save_errno;
+if (!smtp_out) return FALSE;
+fflush(smtp_out);
+if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
+
+/* Limit amount read, so non-message data is not fed to DKIM.
+Take care to not touch the safety NUL at the end of the buffer. */
+
+rc = read(fileno(smtp_in), smtp_inbuffer, MIN(IN_BUFFER_SIZE-1, lim));
+save_errno = errno;
+alarm(0);
+if (rc <= 0)
+ {
+ /* Must put the error text in fixed store, because this might be during
+ header reading, where it releases unused store above the header. */
+ if (rc < 0)
+ {
+ smtp_had_error = save_errno;
+ smtp_read_error = string_copy_malloc(
+ string_sprintf(" (error: %s)", strerror(save_errno)));
+ }
+ else smtp_had_eof = 1;
+ return FALSE;
+ }
+#ifndef DISABLE_DKIM
+dkim_exim_verify_feed(smtp_inbuffer, rc);
+#endif
+smtp_inend = smtp_inbuffer + rc;
+smtp_inptr = smtp_inbuffer;
+return TRUE;
+}
+
/*************************************************
* SMTP version of getc() *
*************************************************/
/* This gets the next byte from the SMTP input buffer. If the buffer is empty,
it flushes the output, and refills the buffer, with a timeout. The signal
handler is set appropriately by the calling function. This function is not used
-after a connection has negotated itself into an TLS/SSL state.
+after a connection has negotiated itself into an TLS/SSL state.
-Arguments: none
+Arguments: lim Maximum amount to read/buffer
Returns: the next character or EOF
*/
int
-smtp_getc(void)
+smtp_getc(unsigned lim)
+{
+if (smtp_inptr >= smtp_inend)
+ if (!smtp_refill(lim))
+ return EOF;
+return *smtp_inptr++;
+}
+
+uschar *
+smtp_getbuf(unsigned * len)
{
+unsigned size;
+uschar * buf;
+
if (smtp_inptr >= smtp_inend)
+ if (!smtp_refill(*len))
+ { *len = 0; return NULL; }
+
+if ((size = smtp_inend - smtp_inptr) > *len) size = *len;
+buf = smtp_inptr;
+smtp_inptr += size;
+*len = size;
+return buf;
+}
+
+void
+smtp_get_cache(void)
+{
+#ifndef DISABLE_DKIM
+int n = smtp_inend - smtp_inptr;
+if (n > 0)
+ dkim_exim_verify_feed(smtp_inptr, n);
+#endif
+}
+
+
+/* Get a byte from the smtp input, in CHUNKING mode. Handle ack of the
+previous BDAT chunk and getting new ones when we run out. Uses the
+underlying smtp_getc or tls_getc both for that and for getting the
+(buffered) data byte. EOD signals (an expected) no further data.
+ERR signals a protocol error, and EOF a closed input stream.
+
+Called from read_bdat_smtp() in receive.c for the message body, but also
+by the headers read loop in receive_msg(); manipulates chunking_state
+to handle the BDAT command/response.
+Placed here due to the correlation with the above smtp_getc(), which it wraps,
+and also by the need to do smtp command/response handling.
+
+Arguments: lim (ignored)
+Returns: the next character or ERR, EOD or EOF
+*/
+
+int
+bdat_getc(unsigned lim)
+{
+uschar * user_msg = NULL;
+uschar * log_msg;
+
+for(;;)
{
- int rc, save_errno;
- fflush(smtp_out);
- if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
- rc = read(fileno(smtp_in), smtp_inbuffer, in_buffer_size);
- save_errno = errno;
- alarm(0);
- if (rc <= 0)
+#ifndef DISABLE_DKIM
+ BOOL dkim_save;
+#endif
+
+ if (chunking_data_left > 0)
+ return lwr_receive_getc(chunking_data_left--);
+
+ receive_getc = lwr_receive_getc;
+ receive_getbuf = lwr_receive_getbuf;
+ receive_ungetc = lwr_receive_ungetc;
+#ifndef DISABLE_DKIM
+ dkim_save = dkim_collect_input;
+ dkim_collect_input = FALSE;
+#endif
+
+ /* Unless PIPELINING was offered, there should be no next command
+ until after we ack that chunk */
+
+ if (!pipelining_advertised && !check_sync())
{
- /* Must put the error text in fixed store, because this might be during
- header reading, where it releases unused store above the header. */
- if (rc < 0)
- {
- smtp_had_error = save_errno;
- smtp_read_error = string_copy_malloc(
- string_sprintf(" (error: %s)", strerror(save_errno)));
- }
- else smtp_had_eof = 1;
- return EOF;
+ unsigned n = smtp_inend - smtp_inptr;
+ if (n > 32) n = 32;
+
+ incomplete_transaction_log(US"sync failure");
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol synchronization error "
+ "(next input sent too soon: pipelining was not advertised): "
+ "rejected \"%s\" %s next input=\"%s\"%s",
+ smtp_cmd_buffer, host_and_ident(TRUE),
+ string_printing(string_copyn(smtp_inptr, n)),
+ smtp_inend - smtp_inptr > n ? "..." : "");
+ (void) synprot_error(L_smtp_protocol_error, 554, NULL,
+ US"SMTP synchronization error");
+ goto repeat_until_rset;
+ }
+
+ /* If not the last, ack the received chunk. The last response is delayed
+ until after the data ACL decides on it */
+
+ if (chunking_state == CHUNKING_LAST)
+ {
+#ifndef DISABLE_DKIM
+ dkim_exim_verify_feed(NULL, 0); /* notify EOD */
+#endif
+ return EOD;
}
+
+ smtp_printf("250 %u byte chunk received\r\n", FALSE, chunking_datasize);
+ chunking_state = CHUNKING_OFFERED;
+ DEBUG(D_receive) debug_printf("chunking state %d\n", (int)chunking_state);
+
+ /* Expect another BDAT cmd from input. RFC 3030 says nothing about
+ QUIT, RSET or NOOP but handling them seems obvious */
+
+next_cmd:
+ switch(smtp_read_command(TRUE, 1))
+ {
+ default:
+ (void) synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"only BDAT permissible after non-LAST BDAT");
+
+ repeat_until_rset:
+ switch(smtp_read_command(TRUE, 1))
+ {
+ case QUIT_CMD: smtp_quit_handler(&user_msg, &log_msg); /*FALLTHROUGH */
+ case EOF_CMD: return EOF;
+ case RSET_CMD: smtp_rset_handler(); return ERR;
+ default: if (synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"only RSET accepted now") > 0)
+ return EOF;
+ goto repeat_until_rset;
+ }
+
+ case QUIT_CMD:
+ smtp_quit_handler(&user_msg, &log_msg);
+ /*FALLTHROUGH*/
+ case EOF_CMD:
+ return EOF;
+
+ case RSET_CMD:
+ smtp_rset_handler();
+ return ERR;
+
+ case NOOP_CMD:
+ HAD(SCH_NOOP);
+ smtp_printf("250 OK\r\n", FALSE);
+ goto next_cmd;
+
+ case BDAT_CMD:
+ {
+ int n;
+
+ if (sscanf(CS smtp_cmd_data, "%u %n", &chunking_datasize, &n) < 1)
+ {
+ (void) synprot_error(L_smtp_protocol_error, 501, NULL,
+ US"missing size for BDAT command");
+ return ERR;
+ }
+ chunking_state = strcmpic(smtp_cmd_data+n, US"LAST") == 0
+ ? CHUNKING_LAST : CHUNKING_ACTIVE;
+ chunking_data_left = chunking_datasize;
+ DEBUG(D_receive) debug_printf("chunking state %d, %d bytes\n",
+ (int)chunking_state, chunking_data_left);
+
+ if (chunking_datasize == 0)
+ if (chunking_state == CHUNKING_LAST)
+ return EOD;
+ else
+ {
+ (void) synprot_error(L_smtp_protocol_error, 504, NULL,
+ US"zero size for BDAT command");
+ goto repeat_until_rset;
+ }
+
+ receive_getc = bdat_getc;
+ receive_getbuf = bdat_getbuf; /* r~getbuf is never actually used */
+ receive_ungetc = bdat_ungetc;
#ifndef DISABLE_DKIM
- dkim_exim_verify_feed(smtp_inbuffer, rc);
+ dkim_collect_input = dkim_save;
#endif
- smtp_inend = smtp_inbuffer + rc;
- smtp_inptr = smtp_inbuffer;
+ break; /* to top of main loop */
+ }
+ }
+ }
+}
+
+uschar *
+bdat_getbuf(unsigned * len)
+{
+uschar * buf;
+
+if (chunking_data_left <= 0)
+ { *len = 0; return NULL; }
+
+if (*len > chunking_data_left) *len = chunking_data_left;
+buf = lwr_receive_getbuf(len); /* Either smtp_getbuf or tls_getbuf */
+chunking_data_left -= *len;
+return buf;
+}
+
+void
+bdat_flush_data(void)
+{
+while (chunking_data_left)
+ {
+ unsigned n = chunking_data_left;
+ if (!bdat_getbuf(&n)) break;
+ }
+
+receive_getc = lwr_receive_getc;
+receive_getbuf = lwr_receive_getbuf;
+receive_ungetc = lwr_receive_ungetc;
+
+if (chunking_state != CHUNKING_LAST)
+ {
+ chunking_state = CHUNKING_OFFERED;
+ DEBUG(D_receive) debug_printf("chunking state %d\n", (int)chunking_state);
}
-return *smtp_inptr++;
}
+
/*************************************************
* SMTP version of ungetc() *
*************************************************/
int
smtp_ungetc(int ch)
{
-*(--smtp_inptr) = ch;
+*--smtp_inptr = ch;
return ch;
}
+int
+bdat_ungetc(int ch)
+{
+chunking_data_left++;
+return lwr_receive_ungetc(ch);
+}
+
/*************************************************
Arguments:
format format string
+ more further data expected
... optional arguments
Returns: nothing
*/
void
-smtp_printf(const char *format, ...)
+smtp_printf(const char *format, BOOL more, ...)
{
va_list ap;
-va_start(ap, format);
-smtp_vprintf(format, ap);
+va_start(ap, more);
+smtp_vprintf(format, more, ap);
va_end(ap);
}
call another vararg function, only a function which accepts a va_list. */
void
-smtp_vprintf(const char *format, va_list ap)
+smtp_vprintf(const char *format, BOOL more, va_list ap)
{
BOOL yield;
{
log_write(0, LOG_MAIN|LOG_PANIC, "string too large in smtp_printf()");
smtp_closedown(US"Unexpected error");
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, NULL);
}
/* If this is the first output for a (non-batch) RCPT command, see if all RCPTs
#ifdef SUPPORT_TLS
if (tls_in.active >= 0)
{
- if (tls_write(TRUE, big_buffer, Ustrlen(big_buffer)) < 0)
+ if (tls_write(TRUE, big_buffer, Ustrlen(big_buffer), more) < 0)
smtp_write_error = -1;
}
else
moan_smtp_batch(NULL, "421 SMTP command timeout"); /* Does not return */
smtp_notquit_exit(US"command-timeout", US"421",
US"%s: SMTP command timeout - closing connection", smtp_active_hostname);
-exim_exit(EXIT_FAILURE);
+exim_exit(EXIT_FAILURE, US"receiving");
}
moan_smtp_batch(NULL, "421 SIGTERM received"); /* Does not return */
smtp_notquit_exit(US"signal-exit", US"421",
US"%s: Service not available - closing connection", smtp_active_hostname);
-exim_exit(EXIT_FAILURE);
+exim_exit(EXIT_FAILURE, US"receiving");
}
Returns: none
*/
static void
-restore_socket_timeout(int fd, int get_ok, struct timeval tvtmp, socklen_t vslen)
+restore_socket_timeout(int fd, int get_ok, struct timeval * tvtmp, socklen_t vslen)
{
if (get_ok == 0)
- setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, (char *)&tvtmp, vslen);
+ (void) setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, CS tvtmp, vslen);
}
/*************************************************
* Check if host is required proxy host *
*************************************************/
/* The function determines if inbound host will be a regular smtp host
-or if it is configured that it must use Proxy Protocol.
+or if it is configured that it must use Proxy Protocol. A local
+connection cannot.
Arguments: none
Returns: bool
check_proxy_protocol_host()
{
int rc;
-/* Cannot configure local connection as a proxy inbound */
-if (sender_host_address == NULL) return proxy_session;
-rc = verify_check_this_host(CUSS &hosts_proxy, NULL, NULL,
- sender_host_address, NULL);
-if (rc == OK)
+if ( sender_host_address
+ && (rc = verify_check_this_host(CUSS &hosts_proxy, NULL, NULL,
+ sender_host_address, NULL)) == OK)
{
DEBUG(D_receive)
debug_printf("Detected proxy protocol configured host\n");
}
+/*************************************************
+* Read data until newline or end of buffer *
+*************************************************/
+/* While SMTP is server-speaks-first, TLS is client-speaks-first, so we can't
+read an entire buffer and assume there will be nothing past a proxy protocol
+header. Our approach normally is to use stdio, but again that relies upon
+"STARTTLS\r\n" and a server response before the client starts TLS handshake, or
+reading _nothing_ before client TLS handshake. So we don't want to use the
+usual buffering reads which may read enough to block TLS starting.
+
+So unfortunately we're down to "read one byte at a time, with a syscall each,
+and expect a little overhead", for all proxy-opened connections which are v1,
+just to handle the TLS-on-connect case. Since SSL functions wrap the
+underlying fd, we can't assume that we can feed them any already-read content.
+
+We need to know where to read to, the max capacity, and we'll read until we
+get a CR and one more character. Let the caller scream if it's CR+!LF.
+
+Return the amount read.
+*/
+
+static int
+swallow_until_crlf(int fd, uschar *base, int already, int capacity)
+{
+uschar *to = base + already;
+uschar *cr;
+int have = 0;
+int ret;
+int last = 0;
+
+/* For "PROXY UNKNOWN\r\n" we, at time of writing, expect to have read
+up through the \r; for the _normal_ case, we haven't yet seen the \r. */
+
+cr = memchr(base, '\r', already);
+if (cr != NULL)
+ {
+ if ((cr - base) < already - 1)
+ {
+ /* \r and presumed \n already within what we have; probably not
+ actually proxy protocol, but abort cleanly. */
+ return 0;
+ }
+ /* \r is last character read, just need one more. */
+ last = 1;
+ }
+
+while (capacity > 0)
+ {
+ do { ret = recv(fd, to, 1, 0); } while (ret == -1 && errno == EINTR);
+ if (ret == -1)
+ return -1;
+ have++;
+ if (last)
+ return have;
+ if (*to == '\r')
+ last = 1;
+ capacity--;
+ to++;
+ }
+
+/* reached end without having room for a final newline, abort */
+errno = EOVERFLOW;
+return -1;
+}
+
/*************************************************
* Setup host for proxy protocol *
*************************************************/
includes an incorrect number of spaces separating args.
Arguments: none
-Returns: int
+Returns: Boolean success
*/
-static BOOL
+static void
setup_proxy_protocol_host()
{
union {
char tmpip6[INET6_ADDRSTRLEN];
struct sockaddr_in6 tmpaddr6;
+/* We can't read "all data until end" because while SMTP is
+server-speaks-first, the TLS handshake is client-speaks-first, so for
+TLS-on-connect ports the proxy protocol header will usually be immediately
+followed by a TLS handshake, and with N TLS libraries, we can't reliably
+reinject data for reading by those. So instead we first read "enough to be
+safely read within the header, and figure out how much more to read".
+For v1 we will later read to the end-of-line, for v2 we will read based upon
+the stated length.
+
+The v2 sig is 12 octets, and another 4 gets us the length, so we know how much
+data is needed total. For v1, where the line looks like:
+PROXY TCPn L3src L3dest SrcPort DestPort \r\n
+
+However, for v1 there's also `PROXY UNKNOWN\r\n` which is only 15 octets.
+We seem to support that. So, if we read 14 octets then we can tell if we're
+v2 or v1. If we're v1, we can continue reading as normal.
+
+If we're v2, we can't slurp up the entire header. We need the length in the
+15th & 16th octets, then to read everything after that.
+
+So to safely handle v1 and v2, with client-sent-first supported correctly,
+we have to do a minimum of 3 read calls, not 1. Eww.
+*/
+
+#define PROXY_INITIAL_READ 14
+#define PROXY_V2_HEADER_SIZE 16
+#if PROXY_INITIAL_READ > PROXY_V2_HEADER_SIZE
+# error Code bug in sizes of data to read for proxy usage
+#endif
+
int get_ok = 0;
-int size, ret, fd;
+int size, ret;
+int fd = fileno(smtp_in);
const char v2sig[12] = "\x0D\x0A\x0D\x0A\x00\x0D\x0A\x51\x55\x49\x54\x0A";
-uschar *iptype; /* To display debug info */
+uschar * iptype; /* To display debug info */
struct timeval tv;
-socklen_t vslen = 0;
struct timeval tvtmp;
-
-vslen = sizeof(struct timeval);
-
-fd = fileno(smtp_in);
+socklen_t vslen = sizeof(struct timeval);
+BOOL yield = FALSE;
/* Save current socket timeout values */
-get_ok = getsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, (char *)&tvtmp,
- &vslen);
+get_ok = getsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, CS &tvtmp, &vslen);
/* Proxy Protocol host must send header within a short time
(default 3 seconds) or it's considered invalid */
tv.tv_sec = PROXY_NEGOTIATION_TIMEOUT_SEC;
tv.tv_usec = PROXY_NEGOTIATION_TIMEOUT_USEC;
-setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, (char *)&tv,
- sizeof(struct timeval));
+if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, CS &tv, sizeof(tv)) < 0)
+ goto bad;
do
{
/* The inbound host was declared to be a Proxy Protocol host, so
- don't do a PEEK into the data, actually slurp it up. */
- ret = recv(fd, &hdr, sizeof(hdr), 0);
+ don't do a PEEK into the data, actually slurp up enough to be
+ "safe". Can't take it all because TLS-on-connect clients follow
+ immediately with TLS handshake. */
+ ret = recv(fd, &hdr, PROXY_INITIAL_READ, 0);
}
while (ret == -1 && errno == EINTR);
if (ret == -1)
- {
- restore_socket_timeout(fd, get_ok, tvtmp, vslen);
- return (errno == EAGAIN) ? 0 : ERRNO_PROXYFAIL;
- }
+ goto proxyfail;
-if (ret >= 16 &&
- memcmp(&hdr.v2, v2sig, 12) == 0)
+/* For v2, handle reading the length, and then the rest. */
+if ((ret == PROXY_INITIAL_READ) && (memcmp(&hdr.v2, v2sig, sizeof(v2sig)) == 0))
{
- uint8_t ver, cmd;
+ int retmore;
+ uint8_t ver;
+
+ /* First get the length fields. */
+ do
+ {
+ retmore = recv(fd, (uschar*)&hdr + ret, PROXY_V2_HEADER_SIZE - PROXY_INITIAL_READ, 0);
+ } while (retmore == -1 && errno == EINTR);
+ if (retmore == -1)
+ goto proxyfail;
+ ret += retmore;
- /* May 2014: haproxy combined the version and command into one byte to
- allow two full bytes for the length field in order to proxy SSL
- connections. SSL Proxy is not supported in this version of Exim, but
- must still seperate values here. */
ver = (hdr.v2.ver_cmd & 0xf0) >> 4;
- cmd = (hdr.v2.ver_cmd & 0x0f);
+
+ /* May 2014: haproxy combined the version and command into one byte to
+ allow two full bytes for the length field in order to proxy SSL
+ connections. SSL Proxy is not supported in this version of Exim, but
+ must still separate values here. */
if (ver != 0x02)
{
DEBUG(D_receive) debug_printf("Invalid Proxy Protocol version: %d\n", ver);
goto proxyfail;
}
- DEBUG(D_receive) debug_printf("Detected PROXYv2 header\n");
+
/* The v2 header will always be 16 bytes per the spec. */
- size = 16 + hdr.v2.len;
- if (ret < size)
+ size = 16 + ntohs(hdr.v2.len);
+ DEBUG(D_receive) debug_printf("Detected PROXYv2 header, size %d (limit %d)\n",
+ size, (int)sizeof(hdr));
+
+ /* We should now have 16 octets (PROXY_V2_HEADER_SIZE), and we know the total
+ amount that we need. Double-check that the size is not unreasonable, then
+ get the rest. */
+ if (size > sizeof(hdr))
{
- DEBUG(D_receive) debug_printf("Truncated or too large PROXYv2 header (%d/%d)\n",
- ret, size);
+ DEBUG(D_receive) debug_printf("PROXYv2 header size unreasonably large; security attack?\n");
goto proxyfail;
}
+
+ do
+ {
+ do
+ {
+ retmore = recv(fd, (uschar*)&hdr + ret, size-ret, 0);
+ } while (retmore == -1 && errno == EINTR);
+ if (retmore == -1)
+ goto proxyfail;
+ ret += retmore;
+ DEBUG(D_receive) debug_printf("PROXYv2: have %d/%d required octets\n", ret, size);
+ } while (ret < size);
+
+ } /* end scope for getting rest of data for v2 */
+
+/* At this point: if PROXYv2, we've read the exact size required for all data;
+if PROXYv1 then we've read "less than required for any valid line" and should
+read the rest". */
+
+if (ret >= 16 && memcmp(&hdr.v2, v2sig, 12) == 0)
+ {
+ uint8_t cmd = (hdr.v2.ver_cmd & 0x0f);
+
switch (cmd)
{
case 0x01: /* PROXY command */
case 0x11: /* TCPv4 address type */
iptype = US"IPv4";
tmpaddr.sin_addr.s_addr = hdr.v2.addr.ip4.src_addr;
- inet_ntop(AF_INET, &(tmpaddr.sin_addr), (char *)&tmpip, sizeof(tmpip));
- if (!string_is_ip_address(US tmpip,NULL))
+ inet_ntop(AF_INET, &tmpaddr.sin_addr, CS &tmpip, sizeof(tmpip));
+ if (!string_is_ip_address(US tmpip, NULL))
{
DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
- return ERRNO_PROXYFAIL;
+ goto proxyfail;
}
proxy_local_address = sender_host_address;
sender_host_address = string_copy(US tmpip);
sender_host_port = tmpport;
/* Save dest ip/port */
tmpaddr.sin_addr.s_addr = hdr.v2.addr.ip4.dst_addr;
- inet_ntop(AF_INET, &(tmpaddr.sin_addr), (char *)&tmpip, sizeof(tmpip));
- if (!string_is_ip_address(US tmpip,NULL))
+ inet_ntop(AF_INET, &tmpaddr.sin_addr, CS &tmpip, sizeof(tmpip));
+ if (!string_is_ip_address(US tmpip, NULL))
{
DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
- return ERRNO_PROXYFAIL;
+ goto proxyfail;
}
proxy_external_address = string_copy(US tmpip);
tmpport = ntohs(hdr.v2.addr.ip4.dst_port);
case 0x21: /* TCPv6 address type */
iptype = US"IPv6";
memmove(tmpaddr6.sin6_addr.s6_addr, hdr.v2.addr.ip6.src_addr, 16);
- inet_ntop(AF_INET6, &(tmpaddr6.sin6_addr), (char *)&tmpip6, sizeof(tmpip6));
- if (!string_is_ip_address(US tmpip6,NULL))
+ inet_ntop(AF_INET6, &tmpaddr6.sin6_addr, CS &tmpip6, sizeof(tmpip6));
+ if (!string_is_ip_address(US tmpip6, NULL))
{
DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
- return ERRNO_PROXYFAIL;
+ goto proxyfail;
}
proxy_local_address = sender_host_address;
sender_host_address = string_copy(US tmpip6);
sender_host_port = tmpport;
/* Save dest ip/port */
memmove(tmpaddr6.sin6_addr.s6_addr, hdr.v2.addr.ip6.dst_addr, 16);
- inet_ntop(AF_INET6, &(tmpaddr6.sin6_addr), (char *)&tmpip6, sizeof(tmpip6));
- if (!string_is_ip_address(US tmpip6,NULL))
+ inet_ntop(AF_INET6, &tmpaddr6.sin6_addr, CS &tmpip6, sizeof(tmpip6));
+ if (!string_is_ip_address(US tmpip6, NULL))
{
DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
- return ERRNO_PROXYFAIL;
+ goto proxyfail;
}
proxy_external_address = string_copy(US tmpip6);
tmpport = ntohs(hdr.v2.addr.ip6.dst_port);
break;
case 0x00: /* LOCAL command */
/* Keep local connection address for LOCAL */
+ iptype = US"local";
break;
default:
DEBUG(D_receive)
goto proxyfail;
}
}
-else if (ret >= 8 &&
- memcmp(hdr.v1.line, "PROXY", 5) == 0)
+else if (ret >= 8 && memcmp(hdr.v1.line, "PROXY", 5) == 0)
{
- uschar *p = string_copy(hdr.v1.line);
- uschar *end = memchr(p, '\r', ret - 1);
+ uschar *p;
+ uschar *end;
uschar *sp; /* Utility variables follow */
int tmp_port;
+ int r2;
char *endc;
- if (!end || end[1] != '\n')
+ /* get the rest of the line */
+ r2 = swallow_until_crlf(fd, (uschar*)&hdr, ret, sizeof(hdr)-ret);
+ if (r2 == -1)
+ goto proxyfail;
+ ret += r2;
+
+ p = string_copy(hdr.v1.line);
+ end = memchr(p, '\r', ret - 1);
+
+ if (!end || (end == (uschar*)&hdr + ret) || end[1] != '\n')
{
DEBUG(D_receive) debug_printf("Partial or invalid PROXY header\n");
goto proxyfail;
}
*end = '\0'; /* Terminate the string */
- size = end + 2 - hdr.v1.line; /* Skip header + CRLF */
+ size = end + 2 - p; /* Skip header + CRLF */
DEBUG(D_receive) debug_printf("Detected PROXYv1 header\n");
+ DEBUG(D_receive) debug_printf("Bytes read not within PROXY header: %d\n", ret - size);
/* Step through the string looking for the required fields. Ensure
- strict adherance to required formatting, exit for any error. */
+ strict adherence to required formatting, exit for any error. */
p += 5;
if (!isspace(*(p++)))
{
goto proxyfail;
}
*sp = '\0';
- if(!string_is_ip_address(p,NULL))
+ if(!string_is_ip_address(p, NULL))
{
DEBUG(D_receive)
debug_printf("Proxied src arg is not an %s address\n", iptype);
goto proxyfail;
}
*sp = '\0';
- if(!string_is_ip_address(p,NULL))
+ if(!string_is_ip_address(p, NULL))
{
DEBUG(D_receive)
debug_printf("Proxy dest arg is not an %s address\n", iptype);
goto proxyfail;
}
*sp = '\0';
- tmp_port = strtol(CCS p,&endc,10);
+ tmp_port = strtol(CCS p, &endc, 10);
if (*endc || tmp_port == 0)
{
DEBUG(D_receive)
DEBUG(D_receive) debug_printf("Did not find proxy dest port\n");
goto proxyfail;
}
- tmp_port = strtol(CCS p,&endc,10);
+ tmp_port = strtol(CCS p, &endc, 10);
if (*endc || tmp_port == 0)
{
DEBUG(D_receive)
}
proxy_external_port = tmp_port;
/* Already checked for /r /n above. Good V1 header received. */
- goto done;
}
else
{
/* Wrong protocol */
DEBUG(D_receive) debug_printf("Invalid proxy protocol version negotiation\n");
+ (void) swallow_until_crlf(fd, (uschar*)&hdr, ret, sizeof(hdr)-ret);
goto proxyfail;
}
+done:
+ DEBUG(D_receive)
+ debug_printf("Valid %s sender from Proxy Protocol header\n", iptype);
+ yield = proxy_session;
+
+/* Don't flush any potential buffer contents. Any input on proxyfail
+should cause a synchronization failure */
+
proxyfail:
-restore_socket_timeout(fd, get_ok, tvtmp, vslen);
-/* Don't flush any potential buffer contents. Any input should cause a
- synchronization failure */
-return FALSE;
+ restore_socket_timeout(fd, get_ok, &tvtmp, vslen);
-done:
-restore_socket_timeout(fd, get_ok, tvtmp, vslen);
-DEBUG(D_receive)
- debug_printf("Valid %s sender from Proxy Protocol header\n", iptype);
-return proxy_session;
+bad:
+ if (yield)
+ {
+ sender_host_name = NULL;
+ (void) host_name_lookup();
+ host_build_sender_fullhost();
+ }
+ else
+ {
+ proxy_session_failed = TRUE;
+ DEBUG(D_receive)
+ debug_printf("Failure to extract proxied host, only QUIT allowed\n");
+ }
+
+return;
}
#endif
return when it runs.
Arguments:
- check_sync if TRUE, check synchronization rules if global option is TRUE
+ check_sync if TRUE, check synchronization rules if global option is TRUE
+ buffer_lim maximum to buffer in lower layer
Returns: a code identifying the command (enumerated above)
*/
static int
-smtp_read_command(BOOL check_sync)
+smtp_read_command(BOOL check_sync, unsigned buffer_lim)
{
int c;
int ptr = 0;
os_non_restarting_signal(SIGALRM, command_timeout_handler);
-while ((c = (receive_getc)()) != '\n' && c != EOF)
+while ((c = (receive_getc)(buffer_lim)) != '\n' && c != EOF)
{
- if (ptr >= smtp_cmd_buffer_size)
+ if (ptr >= SMTP_CMD_BUFFER_SIZE)
{
os_non_restarting_signal(SIGALRM, sigalrm_handler);
return OTHER_CMD;
for (p = cmd_list; p < cmd_list_end; p++)
{
- #ifdef SUPPORT_PROXY
+#ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
- if (proxy_session && proxy_session_failed)
- {
- if (p->cmd != QUIT_CMD)
- continue;
- }
- #endif
+ if (proxy_session && proxy_session_failed && p->cmd != QUIT_CMD)
+ continue;
+#endif
if ( p->len
&& strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0
&& ( smtp_cmd_buffer[p->len-1] == ':' /* "mail from:" or "rcpt to:" */
/* Enforce synchronization for unknown commands */
-if (smtp_inptr < smtp_inend && /* Outstanding input */
- check_sync && /* Local flag set */
- smtp_enforce_sync && /* Global flag set */
- sender_host_address != NULL && /* Not local input */
- !sender_host_notsocket) /* Really is a socket */
+if ( smtp_inptr < smtp_inend /* Outstanding input */
+ && check_sync /* Local flag set */
+ && smtp_enforce_sync /* Global flag set */
+ && sender_host_address /* Not local input */
+ && !sender_host_notsocket) /* Really is a socket */
return BADSYN_CMD;
return OTHER_CMD;
-/*************************************************
-* Recheck synchronization *
-*************************************************/
-
-/* Synchronization checks can never be perfect because a packet may be on its
-way but not arrived when the check is done. Such checks can in any case only be
-done when TLS is not in use. Normally, the checks happen when commands are
-read: Exim ensures that there is no more input in the input buffer. In normal
-cases, the response to the command will be fast, and there is no further check.
-
-However, for some commands an ACL is run, and that can include delays. In those
-cases, it is useful to do another check on the input just before sending the
-response. This also applies at the start of a connection. This function does
-that check by means of the select() function, as long as the facility is not
-disabled or inappropriate. A failure of select() is ignored.
-
-When there is unwanted input, we read it so that it appears in the log of the
-error.
-
-Arguments: none
-Returns: TRUE if all is well; FALSE if there is input pending
-*/
-
-static BOOL
-check_sync(void)
-{
-int fd, rc;
-fd_set fds;
-struct timeval tzero;
-
-if (!smtp_enforce_sync || sender_host_address == NULL ||
- sender_host_notsocket || tls_in.active >= 0)
- return TRUE;
-
-fd = fileno(smtp_in);
-FD_ZERO(&fds);
-FD_SET(fd, &fds);
-tzero.tv_sec = 0;
-tzero.tv_usec = 0;
-rc = select(fd + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tzero);
-
-if (rc <= 0) return TRUE; /* Not ready to read */
-rc = smtp_getc();
-if (rc < 0) return TRUE; /* End of file or error */
-
-smtp_ungetc(rc);
-rc = smtp_inend - smtp_inptr;
-if (rc > 150) rc = 150;
-smtp_inptr[rc] = 0;
-return FALSE;
-}
-
-
-
/*************************************************
* Forced closedown of call *
*************************************************/
void
smtp_closedown(uschar *message)
{
-if (smtp_in == NULL || smtp_batched_input) return;
+if (!smtp_in || smtp_batched_input) return;
receive_swallow_smtp();
-smtp_printf("421 %s\r\n", message);
+smtp_printf("421 %s\r\n", FALSE, message);
-for (;;)
+for (;;) switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
{
- switch(smtp_read_command(FALSE))
- {
- case EOF_CMD:
+ case EOF_CMD:
return;
- case QUIT_CMD:
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
+ case QUIT_CMD:
+ smtp_printf("221 %s closing connection\r\n", FALSE, smtp_active_hostname);
mac_smtp_fflush();
return;
- case RSET_CMD:
- smtp_printf("250 Reset OK\r\n");
+ case RSET_CMD:
+ smtp_printf("250 Reset OK\r\n", FALSE);
break;
- default:
- smtp_printf("421 %s\r\n", message);
+ default:
+ smtp_printf("421 %s\r\n", FALSE, message);
break;
- }
}
}
uschar *
smtp_get_connection_info(void)
{
-uschar *hostname = (sender_fullhost == NULL)?
- sender_host_address : sender_fullhost;
+const uschar * hostname = sender_fullhost
+ ? sender_fullhost : sender_host_address;
if (host_checking)
return string_sprintf("SMTP connection from %s", hostname);
/* Append TLS-related information to a log line
Arguments:
- s String under construction: allocated string to extend, or NULL
- sizep Pointer to current allocation size (update on return), or NULL
- ptrp Pointer to index for new entries in string (update on return), or NULL
+ g String under construction: allocated string to extend, or NULL
Returns: Allocated string or NULL
*/
-static uschar *
-s_tlslog(uschar * s, int * sizep, int * ptrp)
+static gstring *
+s_tlslog(gstring * g)
{
- int size = sizep ? *sizep : 0;
- int ptr = ptrp ? *ptrp : 0;
-
- if (LOGGING(tls_cipher) && tls_in.cipher != NULL)
- s = string_append(s, &size, &ptr, 2, US" X=", tls_in.cipher);
- if (LOGGING(tls_certificate_verified) && tls_in.cipher != NULL)
- s = string_append(s, &size, &ptr, 2, US" CV=",
- tls_in.certificate_verified? "yes":"no");
- if (LOGGING(tls_peerdn) && tls_in.peerdn != NULL)
- s = string_append(s, &size, &ptr, 3, US" DN=\"",
- string_printing(tls_in.peerdn), US"\"");
- if (LOGGING(tls_sni) && tls_in.sni != NULL)
- s = string_append(s, &size, &ptr, 3, US" SNI=\"",
- string_printing(tls_in.sni), US"\"");
-
- if (s)
- {
- s[ptr] = '\0';
- if (sizep) *sizep = size;
- if (ptrp) *ptrp = ptr;
- }
- return s;
+if (LOGGING(tls_cipher) && tls_in.cipher)
+ g = string_append(g, 2, US" X=", tls_in.cipher);
+if (LOGGING(tls_certificate_verified) && tls_in.cipher)
+ g = string_append(g, 2, US" CV=", tls_in.certificate_verified? "yes":"no");
+if (LOGGING(tls_peerdn) && tls_in.peerdn)
+ g = string_append(g, 3, US" DN=\"", string_printing(tls_in.peerdn), US"\"");
+if (LOGGING(tls_sni) && tls_in.sni)
+ g = string_append(g, 3, US" SNI=\"", string_printing(tls_in.sni), US"\"");
+return g;
}
#endif
void
smtp_log_no_mail(void)
{
-int size, ptr, i;
-uschar *s, *sep;
+int i;
+uschar * sep, * s;
+gstring * g = NULL;
if (smtp_mailcmd_count > 0 || !LOGGING(smtp_no_mail))
return;
-s = NULL;
-size = ptr = 0;
-
-if (sender_host_authenticated != NULL)
+if (sender_host_authenticated)
{
- s = string_append(s, &size, &ptr, 2, US" A=", sender_host_authenticated);
- if (authenticated_id != NULL)
- s = string_append(s, &size, &ptr, 2, US":", authenticated_id);
+ g = string_append(g, 2, US" A=", sender_host_authenticated);
+ if (authenticated_id) g = string_append(g, 2, US":", authenticated_id);
}
#ifdef SUPPORT_TLS
-s = s_tlslog(s, &size, &ptr);
+g = s_tlslog(g);
#endif
-sep = (smtp_connection_had[SMTP_HBUFF_SIZE-1] != SCH_NONE)?
- US" C=..." : US" C=";
+sep = smtp_connection_had[SMTP_HBUFF_SIZE-1] != SCH_NONE ? US" C=..." : US" C=";
+
for (i = smtp_ch_index; i < SMTP_HBUFF_SIZE; i++)
- {
if (smtp_connection_had[i] != SCH_NONE)
{
- s = string_append(s, &size, &ptr, 2, sep,
- smtp_names[smtp_connection_had[i]]);
+ g = string_append(g, 2, sep, smtp_names[smtp_connection_had[i]]);
sep = US",";
}
- }
for (i = 0; i < smtp_ch_index; i++)
{
- s = string_append(s, &size, &ptr, 2, sep, smtp_names[smtp_connection_had[i]]);
+ g = string_append(g, 2, sep, smtp_names[smtp_connection_had[i]]);
sep = US",";
}
-if (s != NULL) s[ptr] = 0; else s = US"";
-log_write(0, LOG_MAIN, "no MAIL in SMTP connection from %s D=%s%s",
- host_and_ident(FALSE),
- readconf_printtime( (int) ((long)time(NULL) - (long)smtp_connection_start)),
- s);
+if (!(s = string_from_gstring(g))) s = US"";
+
+log_write(0, LOG_MAIN, "no MAIL in %sSMTP connection from %s D=%s%s",
+ tcp_in_fastopen ? US"TFO " : US"",
+ host_and_ident(FALSE), string_timesince(&smtp_connection_start), s);
+}
+
+
+/* Return list of recent smtp commands */
+
+uschar *
+smtp_cmd_hist(void)
+{
+int i;
+gstring * list = NULL;
+uschar * s;
+
+for (i = smtp_ch_index; i < SMTP_HBUFF_SIZE; i++)
+ if (smtp_connection_had[i] != SCH_NONE)
+ list = string_append_listele(list, ',', smtp_names[smtp_connection_had[i]]);
+
+for (i = 0; i < smtp_ch_index; i++)
+ list = string_append_listele(list, ',', smtp_names[smtp_connection_had[i]]);
+
+s = string_from_gstring(list);
+return s ? s : US"";
}
+
/*************************************************
* Check HELO line and set sender_helo_name *
*************************************************/
/* Check the format of a HELO line. The data for HELO/EHLO is supposed to be
the domain name of the sending host, or an ip literal in square brackets. The
-arrgument is placed in sender_helo_name, which is in malloc store, because it
+argument is placed in sender_helo_name, which is in malloc store, because it
must persist over multiple incoming messages. If helo_accept_junk is set, this
host is permitted to send any old junk (needed for some broken hosts).
Otherwise, helo_allow_chars can be used for rogue characters in general
/* Discard any previous helo name */
-if (sender_helo_name != NULL)
+if (sender_helo_name)
{
store_free(sender_helo_name);
sender_helo_name = NULL;
/* Skip tests if junk is permitted. */
if (!yield)
- {
+
/* Allow the new standard form for IPv6 address literals, namely,
[IPv6:....], and because someone is bound to use it, allow an equivalent
IPv4 form. Allow plain addresses as well. */
/* Non-literals must be alpha, dot, hyphen, plus any non-valid chars
that have been configured (usually underscore - sigh). */
- else if (*s != 0)
- {
- yield = TRUE;
- while (*s != 0)
- {
+ else if (*s)
+ for (yield = TRUE; *s; s++)
if (!isalnum(*s) && *s != '.' && *s != '-' &&
Ustrchr(helo_allow_chars, *s) == NULL)
{
yield = FALSE;
break;
}
- s++;
- }
- }
- }
/* Save argument if OK */
uschar *v = smtp_cmd_data + Ustrlen(smtp_cmd_data) - 1;
while (isspace(*v)) v--;
v[1] = 0;
-while (v > smtp_cmd_data && *v != '=' && !isspace(*v)) v--;
+while (v > smtp_cmd_data && *v != '=' && !isspace(*v))
+ {
+ /* Take care to not stop at a space embedded in a quoted local-part */
+
+ if (*v == '"') do v--; while (*v != '"' && v > smtp_cmd_data+1);
+ v--;
+ }
n = v;
if (*v == '=')
-{
+ {
while(isalpha(n[-1])) n--;
/* RFC says SP, but TAB seen in wild and other major MTAs accept it */
if (!isspace(n[-1])) return FALSE;
n[-1] = 0;
-}
+ }
else
-{
+ {
n++;
if (v == smtp_cmd_data) return FALSE;
-}
+ }
*v++ = 0;
*name = n;
*value = v;
*************************************************/
/* This function is called whenever the SMTP session is reset from
-within either of the setup functions.
+within either of the setup functions; also from the daemon loop.
Argument: the stacking pool storage reset point
Returns: nothing
*/
-static void
+void
smtp_reset(void *reset_point)
{
-store_reset(reset_point);
recipients_list = NULL;
rcpt_count = rcpt_defer_count = rcpt_fail_count =
raw_recipients_count = recipients_count = recipients_list_max = 0;
-cancel_cutthrough_connection("smtp reset");
message_linecount = 0;
message_size = -1;
acl_added_headers = NULL;
suppress_local_fixups = suppress_local_fixups_default; /* Can be set by ACL */
active_local_from_check = local_from_check; /* Can be set by ACL */
active_local_sender_retain = local_sender_retain; /* Can be set by ACL */
-sender_address = NULL;
+sending_ip_address = NULL;
+return_path = sender_address = NULL;
+sender_data = NULL; /* Can be set by ACL */
+deliver_localpart_parent = deliver_localpart_orig = NULL;
+deliver_domain_parent = deliver_domain_orig = NULL;
+callout_address = NULL;
submission_name = NULL; /* Can be set by ACL */
raw_sender = NULL; /* After SMTP rewrite, before qualifying */
sender_address_unrewritten = NULL; /* Set only after verify rewrite */
bmi_run = 0;
bmi_verdicts = NULL;
#endif
-chunking_state = CHUNKING_NOT_OFFERED;
+dnslist_domain = dnslist_matched = NULL;
#ifndef DISABLE_DKIM
-dkim_signers = NULL;
-dkim_disable_verify = FALSE;
-dkim_collect_input = FALSE;
+dkim_cur_signer = dkim_signers = NULL;
+dkim_disable_verify = dkim_collect_input = FALSE;
#endif
dsn_ret = 0;
dsn_envid = NULL;
+deliver_host = deliver_host_address = NULL; /* Can be set by ACL */
#ifndef DISABLE_PRDR
prdr_requested = FALSE;
#endif
-#ifdef EXPERIMENTAL_SPF
-spf_header_comment = NULL;
-spf_received = NULL;
-spf_result = NULL;
-spf_smtp_comment = NULL;
+#ifdef SUPPORT_SPF
+spf_header_comment = spf_received = spf_result = spf_smtp_comment = NULL;
+#endif
+#ifdef EXPERIMENTAL_ARC
+arc_state = arc_state_reason = NULL;
#endif
#ifdef SUPPORT_I18N
message_smtputf8 = FALSE;
not the first message in an SMTP session and the previous message caused them
to be referenced in an ACL. */
-if (message_body != NULL)
+if (message_body)
{
store_free(message_body);
message_body = NULL;
}
-if (message_body_end != NULL)
+if (message_body_end)
{
store_free(message_body_end);
message_body_end = NULL;
repetition in the same message, but it seems right to repeat them for different
messages. */
-while (acl_warn_logged != NULL)
+while (acl_warn_logged)
{
string_item *this = acl_warn_logged;
acl_warn_logged = acl_warn_logged->next;
store_free(this);
}
+store_reset(reset_point);
}
if ((receive_feof)()) return 0; /* Treat EOF as QUIT */
+cancel_cutthrough_connection(TRUE, US"smtp_setup_batch_msg");
smtp_reset(reset_point); /* Reset for start of message */
/* Deal with SMTP commands. This loop is exited by setting done to a POSITIVE
uschar *recipient = NULL;
int start, end, sender_domain, recipient_domain;
- switch(smtp_read_command(FALSE))
+ switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
{
/* The HELO/EHLO commands set sender_address_helo if they have
valid data; otherwise they are ignored, except that they do
case HELO_CMD:
case EHLO_CMD:
- check_helo(smtp_cmd_data);
- /* Fall through */
+ check_helo(smtp_cmd_data);
+ /* Fall through */
case RSET_CMD:
- smtp_reset(reset_point);
- bsmtp_transaction_linecount = receive_linecount;
- break;
+ cancel_cutthrough_connection(TRUE, US"RSET received");
+ smtp_reset(reset_point);
+ bsmtp_transaction_linecount = receive_linecount;
+ break;
/* The MAIL FROM command requires an address as an operand. All we
it is the canonical extracted address which is all that is kept. */
case MAIL_CMD:
- smtp_mailcmd_count++; /* Count for no-mail log */
- if (sender_address != NULL)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "503 Sender already given");
+ smtp_mailcmd_count++; /* Count for no-mail log */
+ if (sender_address != NULL)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "503 Sender already given");
- if (smtp_cmd_data[0] == 0)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 MAIL FROM must have an address operand");
+ if (smtp_cmd_data[0] == 0)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 MAIL FROM must have an address operand");
- /* Reset to start of message */
+ /* Reset to start of message */
- smtp_reset(reset_point);
+ cancel_cutthrough_connection(TRUE, US"MAIL received");
+ smtp_reset(reset_point);
- /* Apply SMTP rewrite */
+ /* Apply SMTP rewrite */
- raw_sender = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_data, rewrite_smtp|rewrite_smtp_sender, NULL, FALSE,
- US"", global_rewrite_rules) : smtp_cmd_data;
+ raw_sender = ((rewrite_existflags & rewrite_smtp) != 0)?
+ rewrite_one(smtp_cmd_data, rewrite_smtp|rewrite_smtp_sender, NULL, FALSE,
+ US"", global_rewrite_rules) : smtp_cmd_data;
- /* Extract the address; the TRUE flag allows <> as valid */
+ /* Extract the address; the TRUE flag allows <> as valid */
- raw_sender =
- parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
- TRUE);
+ raw_sender =
+ parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
+ TRUE);
- if (raw_sender == NULL)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
+ if (!raw_sender)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
- sender_address = string_copy(raw_sender);
+ sender_address = string_copy(raw_sender);
- /* Qualify unqualified sender addresses if permitted to do so. */
+ /* Qualify unqualified sender addresses if permitted to do so. */
- if (sender_domain == 0 && sender_address[0] != 0 && sender_address[0] != '@')
- {
- if (allow_unqualified_sender)
- {
- sender_address = rewrite_address_qualify(sender_address, FALSE);
- DEBUG(D_receive) debug_printf("unqualified address %s accepted "
- "and rewritten\n", raw_sender);
- }
- /* The function moan_smtp_batch() does not return. */
- else moan_smtp_batch(smtp_cmd_buffer, "501 sender address must contain "
- "a domain");
- }
- break;
+ if ( !sender_domain
+ && sender_address[0] != 0 && sender_address[0] != '@')
+ if (allow_unqualified_sender)
+ {
+ sender_address = rewrite_address_qualify(sender_address, FALSE);
+ DEBUG(D_receive) debug_printf("unqualified address %s accepted "
+ "and rewritten\n", raw_sender);
+ }
+ /* The function moan_smtp_batch() does not return. */
+ else
+ moan_smtp_batch(smtp_cmd_buffer, "501 sender address must contain "
+ "a domain");
+ break;
/* The RCPT TO command requires an address as an operand. All we do
extracted address. */
case RCPT_CMD:
- if (sender_address == NULL)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "503 No sender yet given");
+ if (!sender_address)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "503 No sender yet given");
- if (smtp_cmd_data[0] == 0)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 RCPT TO must have an address operand");
+ if (smtp_cmd_data[0] == 0)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer,
+ "501 RCPT TO must have an address operand");
- /* Check maximum number allowed */
+ /* Check maximum number allowed */
- if (recipients_max > 0 && recipients_count + 1 > recipients_max)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "%s too many recipients",
- recipients_max_reject? "552": "452");
+ if (recipients_max > 0 && recipients_count + 1 > recipients_max)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "%s too many recipients",
+ recipients_max_reject? "552": "452");
- /* Apply SMTP rewrite, then extract address. Don't allow "<>" as a
- recipient address */
+ /* Apply SMTP rewrite, then extract address. Don't allow "<>" as a
+ recipient address */
- recipient = rewrite_existflags & rewrite_smtp
- ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules)
- : smtp_cmd_data;
+ recipient = rewrite_existflags & rewrite_smtp
+ ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- recipient = parse_extract_address(recipient, &errmess, &start, &end,
- &recipient_domain, FALSE);
+ recipient = parse_extract_address(recipient, &errmess, &start, &end,
+ &recipient_domain, FALSE);
- if (!recipient)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
+ if (!recipient)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
- /* If the recipient address is unqualified, qualify it if permitted. Then
- add it to the list of recipients. */
+ /* If the recipient address is unqualified, qualify it if permitted. Then
+ add it to the list of recipients. */
- if (recipient_domain == 0)
- {
- if (allow_unqualified_recipient)
- {
- DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
- recipient);
- recipient = rewrite_address_qualify(recipient, TRUE);
- }
- /* The function moan_smtp_batch() does not return. */
- else moan_smtp_batch(smtp_cmd_buffer, "501 recipient address must contain "
- "a domain");
- }
- receive_add_recipient(recipient, -1);
- break;
+ if (!recipient_domain)
+ if (allow_unqualified_recipient)
+ {
+ DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
+ recipient);
+ recipient = rewrite_address_qualify(recipient, TRUE);
+ }
+ /* The function moan_smtp_batch() does not return. */
+ else
+ moan_smtp_batch(smtp_cmd_buffer,
+ "501 recipient address must contain a domain");
+
+ receive_add_recipient(recipient, -1);
+ break;
/* The DATA command is legal only if it follows successful MAIL FROM
and RCPT TO commands. This function is complete when a valid DATA
command is encountered. */
- case DATA_CMD:
- if (sender_address == NULL || recipients_count <= 0)
- {
- /* The function moan_smtp_batch() does not return. */
- if (sender_address == NULL)
- moan_smtp_batch(smtp_cmd_buffer,
- "503 MAIL FROM:<sender> command must precede DATA");
- else
- moan_smtp_batch(smtp_cmd_buffer,
- "503 RCPT TO:<recipient> must precede DATA");
- }
- else
- {
- done = 3; /* DATA successfully achieved */
- message_ended = END_NOTENDED; /* Indicate in middle of message */
- }
- break;
-
+ case DATA_CMD:
+ if (!sender_address || recipients_count <= 0)
+ /* The function moan_smtp_batch() does not return. */
+ if (!sender_address)
+ moan_smtp_batch(smtp_cmd_buffer,
+ "503 MAIL FROM:<sender> command must precede DATA");
+ else
+ moan_smtp_batch(smtp_cmd_buffer,
+ "503 RCPT TO:<recipient> must precede DATA");
+ else
+ {
+ done = 3; /* DATA successfully achieved */
+ message_ended = END_NOTENDED; /* Indicate in middle of message */
+ }
+ break;
+
/* The VRFY, EXPN, HELP, ETRN, and NOOP commands are ignored. */
case HELP_CMD:
case NOOP_CMD:
case ETRN_CMD:
- bsmtp_transaction_linecount = receive_linecount;
- break;
+ bsmtp_transaction_linecount = receive_linecount;
+ break;
case EOF_CMD:
case QUIT_CMD:
- done = 2;
- break;
+ done = 2;
+ break;
case BADARG_CMD:
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 Unexpected argument data");
- break;
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 Unexpected argument data");
+ break;
case BADCHAR_CMD:
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 Unexpected NULL in SMTP command");
- break;
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 Unexpected NULL in SMTP command");
+ break;
default:
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "500 Command unrecognized");
- break;
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "500 Command unrecognized");
+ break;
}
}
+static BOOL
+smtp_log_tls_fail(uschar * errstr)
+{
+uschar * conn_info = smtp_get_connection_info();
+
+if (Ustrncmp(conn_info, US"SMTP ", 5) == 0) conn_info += 5;
+/* I'd like to get separated H= here, but too hard for now */
+
+log_write(0, LOG_MAIN, "TLS error on %s %s", conn_info, errstr);
+return FALSE;
+}
+
+
+
+
+#ifdef TCP_FASTOPEN
+static void
+tfo_in_check(void)
+{
+# ifdef TCP_INFO
+struct tcp_info tinfo;
+socklen_t len = sizeof(tinfo);
+
+if ( getsockopt(fileno(smtp_out), IPPROTO_TCP, TCP_INFO, &tinfo, &len) == 0
+ && tinfo.tcpi_state == TCP_SYN_RECV
+ )
+ {
+ DEBUG(D_receive) debug_printf("TCP_FASTOPEN mode connection (state TCP_SYN_RECV)\n");
+ tcp_in_fastopen = TRUE;
+ }
+# endif
+}
+#endif
+
+
/*************************************************
* Start an SMTP session *
*************************************************/
BOOL
smtp_start_session(void)
{
-int size = 256;
-int ptr, esclen;
+int esclen;
uschar *user_msg, *log_msg;
uschar *code, *esc;
-uschar *p, *s, *ss;
+uschar *p, *s;
+gstring * ss;
-smtp_connection_start = time(NULL);
+gettimeofday(&smtp_connection_start, NULL);
for (smtp_ch_index = 0; smtp_ch_index < SMTP_HBUFF_SIZE; smtp_ch_index++)
smtp_connection_had[smtp_ch_index] = SCH_NONE;
smtp_ch_index = 0;
/* If receiving by -bs from a trusted user, or testing with -bh, we allow
authentication settings from -oMaa to remain in force. */
-if (!host_checking && !sender_host_notsocket) sender_host_authenticated = NULL;
+if (!host_checking && !sender_host_notsocket)
+ sender_host_auth_pubname = sender_host_authenticated = NULL;
authenticated_by = NULL;
#ifdef SUPPORT_TLS
/* Allow for trailing 0 in the command and data buffers. */
-smtp_cmd_buffer = (uschar *)malloc(2*smtp_cmd_buffer_size + 2);
-if (smtp_cmd_buffer == NULL)
+if (!(smtp_cmd_buffer = US malloc(2*SMTP_CMD_BUFFER_SIZE + 2)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE,
"malloc() failed for SMTP command buffer");
+
smtp_cmd_buffer[0] = 0;
-smtp_data_buffer = smtp_cmd_buffer + smtp_cmd_buffer_size + 1;
+smtp_data_buffer = smtp_cmd_buffer + SMTP_CMD_BUFFER_SIZE + 1;
/* For batched input, the protocol setting can be overridden from the
command line by a trusted caller. */
if (smtp_batched_input)
{
- if (received_protocol == NULL) received_protocol = US"local-bsmtp";
+ if (!received_protocol) received_protocol = US"local-bsmtp";
}
/* For non-batched SMTP input, the protocol setting is forced here. It will be
(sender_host_address ? protocols : protocols_local) [pnormal];
/* Set up the buffer for inputting using direct read() calls, and arrange to
-call the local functions instead of the standard C ones. */
+call the local functions instead of the standard C ones. Place a NUL at the
+end of the buffer to safety-stop C-string reads from it. */
-smtp_inbuffer = (uschar *)malloc(in_buffer_size);
-if (smtp_inbuffer == NULL)
+if (!(smtp_inbuffer = US malloc(IN_BUFFER_SIZE)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "malloc() failed for SMTP input buffer");
+smtp_inbuffer[IN_BUFFER_SIZE-1] = '\0';
+
receive_getc = smtp_getc;
+receive_getbuf = smtp_getbuf;
+receive_get_cache = smtp_get_cache;
receive_ungetc = smtp_ungetc;
receive_feof = smtp_feof;
receive_ferror = smtp_ferror;
/* Set up the message size limit; this may be host-specific */
thismessage_size_limit = expand_string_integer(message_size_limit, TRUE);
-if (expand_string_message != NULL)
+if (expand_string_message)
{
if (thismessage_size_limit == -1)
log_write(0, LOG_MAIN|LOG_PANIC, "unable to expand message_size_limit: "
DEBUG(D_receive) debug_printf("checking for IP options\n");
- if (getsockopt(fileno(smtp_out), IPPROTO_IP, IP_OPTIONS, (uschar *)(ipopt),
+ if (getsockopt(fileno(smtp_out), IPPROTO_IP, IP_OPTIONS, US (ipopt),
&optlen) < 0)
{
if (errno != ENOPROTOOPT)
{
log_write(0, LOG_MAIN, "getsockopt() failed from %s: %s",
host_and_ident(FALSE), strerror(errno));
- smtp_printf("451 SMTP service not available\r\n");
+ smtp_printf("451 SMTP service not available\r\n", FALSE);
return FALSE;
}
}
struct in_addr addr;
#if OPTSTYLE == 1
- uschar *optstart = (uschar *)(ipopt->__data);
+ uschar *optstart = US (ipopt->__data);
#elif OPTSTYLE == 2
- uschar *optstart = (uschar *)(ipopt->ip_opts);
+ uschar *optstart = US (ipopt->ip_opts);
#else
- uschar *optstart = (uschar *)(ipopt->ipopt_list);
+ uschar *optstart = US (ipopt->ipopt_list);
#endif
DEBUG(D_receive) debug_printf("IP options exist\n");
p += Ustrlen(p);
for (opt = optstart; opt != NULL &&
- opt < (uschar *)(ipopt) + optlen;)
+ opt < US (ipopt) + optlen;)
{
switch (*opt)
{
Ustrcat(p, "[ ");
p += 2;
for (i = 0; i < opt[1]; i++)
- {
- sprintf(CS p, "%2.2x ", opt[i]);
- p += 3;
- }
+ p += sprintf(CS p, "%2.2x ", opt[i]);
*p++ = ']';
}
opt += opt[1];
log_write(0, LOG_MAIN|LOG_REJECT,
"connection from %s refused (IP options)", host_and_ident(FALSE));
- smtp_printf("554 SMTP service not available\r\n");
+ smtp_printf("554 SMTP service not available\r\n", FALSE);
return FALSE;
}
"bad value for smtp_receive_timeout: '%s'", exp ? exp : US"");
}
- /* Start up TLS if tls_on_connect is set. This is for supporting the legacy
- smtps port for use with older style SSL MTAs. */
-
- #ifdef SUPPORT_TLS
- if (tls_in.on_connect && tls_server_start(tls_require_ciphers) != OK)
- return FALSE;
- #endif
-
/* Test for explicit connection rejection */
if (verify_check_host(&host_reject_connection) == OK)
{
log_write(L_connection_reject, LOG_MAIN|LOG_REJECT, "refused connection "
"from %s (host_reject_connection)", host_and_ident(FALSE));
- smtp_printf("554 SMTP service not available\r\n");
+ smtp_printf("554 SMTP service not available\r\n", FALSE);
return FALSE;
}
value of errno is 0 or ENOENT (which happens if /etc/hosts.{allow,deny} does
not exist). */
- #ifdef USE_TCP_WRAPPERS
+#ifdef USE_TCP_WRAPPERS
errno = 0;
- tcp_wrappers_name = expand_string(tcp_wrappers_daemon_name);
- if (tcp_wrappers_name == NULL)
- {
+ if (!(tcp_wrappers_name = expand_string(tcp_wrappers_daemon_name)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" "
"(tcp_wrappers_name) failed: %s", string_printing(tcp_wrappers_name),
expand_string_message);
- }
+
if (!hosts_ctl(tcp_wrappers_name,
- (sender_host_name == NULL)? STRING_UNKNOWN : CS sender_host_name,
- (sender_host_address == NULL)? STRING_UNKNOWN : CS sender_host_address,
- (sender_ident == NULL)? STRING_UNKNOWN : CS sender_ident))
+ sender_host_name ? CS sender_host_name : STRING_UNKNOWN,
+ sender_host_address ? CS sender_host_address : STRING_UNKNOWN,
+ sender_ident ? CS sender_ident : STRING_UNKNOWN))
{
if (errno == 0 || errno == ENOENT)
{
log_write(L_connection_reject,
LOG_MAIN|LOG_REJECT, "refused connection from %s "
"(tcp wrappers)", host_and_ident(FALSE));
- smtp_printf("554 SMTP service not available\r\n");
+ smtp_printf("554 SMTP service not available\r\n", FALSE);
}
else
{
log_write(L_connection_reject,
LOG_MAIN|LOG_REJECT, "temporarily refused connection from %s "
"(tcp wrappers errno=%d)", host_and_ident(FALSE), save_errno);
- smtp_printf("451 Temporary local problem - please try later\r\n");
+ smtp_printf("451 Temporary local problem - please try later\r\n", FALSE);
}
return FALSE;
}
- #endif
+#endif
/* Check for reserved slots. The value of smtp_accept_count has already been
incremented to include this process. */
host_and_ident(FALSE), smtp_accept_count - 1, smtp_accept_max,
smtp_accept_reserve, (rc == DEFER)? " (lookup deferred)" : "");
smtp_printf("421 %s: Too many concurrent SMTP connections; "
- "please try again later\r\n", smtp_active_hostname);
+ "please try again later\r\n", FALSE, smtp_active_hostname);
return FALSE;
}
reserved_host = TRUE;
LOG_MAIN, "temporarily refused connection from %s: not in "
"reserve list and load average = %.2f", host_and_ident(FALSE),
(double)load_average/1000.0);
- smtp_printf("421 %s: Too much load; please try again later\r\n",
+ smtp_printf("421 %s: Too much load; please try again later\r\n", FALSE,
smtp_active_hostname);
return FALSE;
}
if (smtp_batched_input) return TRUE;
-#ifdef SUPPORT_PROXY
/* If valid Proxy Protocol source is connecting, set up session.
* Failure will not allow any SMTP function other than QUIT. */
+
+#ifdef SUPPORT_PROXY
proxy_session = FALSE;
proxy_session_failed = FALSE;
if (check_proxy_protocol_host())
- {
- if (setup_proxy_protocol_host() == FALSE)
- {
- proxy_session_failed = TRUE;
- DEBUG(D_receive)
- debug_printf("Failure to extract proxied host, only QUIT allowed\n");
- }
- else
+ setup_proxy_protocol_host();
+#endif
+
+ /* Start up TLS if tls_on_connect is set. This is for supporting the legacy
+ smtps port for use with older style SSL MTAs. */
+
+#ifdef SUPPORT_TLS
+ if (tls_in.on_connect)
{
- sender_host_name = NULL;
- (void)host_name_lookup();
- host_build_sender_fullhost();
+ if (tls_server_start(tls_require_ciphers, &user_msg) != OK)
+ return smtp_log_tls_fail(user_msg);
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
}
- }
#endif
-/* Run the ACL if it exists */
+/* Run the connect ACL if it exists */
user_msg = NULL;
-if (acl_smtp_connect != NULL)
+if (acl_smtp_connect)
{
int rc;
- rc = acl_check(ACL_WHERE_CONNECT, NULL, acl_smtp_connect, &user_msg,
- &log_msg);
- if (rc != OK)
+ if ((rc = acl_check(ACL_WHERE_CONNECT, NULL, acl_smtp_connect, &user_msg,
+ &log_msg)) != OK)
{
- (void)smtp_handle_acl_fail(ACL_WHERE_CONNECT, rc, user_msg, log_msg);
+ (void) smtp_handle_acl_fail(ACL_WHERE_CONNECT, rc, user_msg, log_msg);
return FALSE;
}
}
first, and output it in one fell swoop. This gives a better chance of it
ending up as a single packet. */
-ss = store_get(size);
-ptr = 0;
+ss = string_get(256);
p = s;
do /* At least once, in case we have an empty string */
{
int len;
uschar *linebreak = Ustrchr(p, '\n');
- ss = string_catn(ss, &size, &ptr, code, 3);
- if (linebreak == NULL)
+ ss = string_catn(ss, code, 3);
+ if (!linebreak)
{
len = Ustrlen(p);
- ss = string_catn(ss, &size, &ptr, US" ", 1);
+ ss = string_catn(ss, US" ", 1);
}
else
{
len = linebreak - p;
- ss = string_catn(ss, &size, &ptr, US"-", 1);
+ ss = string_catn(ss, US"-", 1);
}
- ss = string_catn(ss, &size, &ptr, esc, esclen);
- ss = string_catn(ss, &size, &ptr, p, len);
- ss = string_catn(ss, &size, &ptr, US"\r\n", 2);
+ ss = string_catn(ss, esc, esclen);
+ ss = string_catn(ss, p, len);
+ ss = string_catn(ss, US"\r\n", 2);
p += len;
- if (linebreak != NULL) p++;
+ if (linebreak) p++;
}
-while (*p != 0);
-
-ss[ptr] = 0; /* string_cat leaves room for this */
+while (*p);
/* Before we write the banner, check that there is no input pending, unless
this synchronisation check is disabled. */
if (!check_sync())
{
+ unsigned n = smtp_inend - smtp_inptr;
+ if (n > 32) n = 32;
+
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol "
"synchronization error (input sent without waiting for greeting): "
"rejected connection from %s input=\"%s\"", host_and_ident(TRUE),
- string_printing(smtp_inptr));
- smtp_printf("554 SMTP synchronization error\r\n");
+ string_printing(string_copyn(smtp_inptr, n)));
+ smtp_printf("554 SMTP synchronization error\r\n", FALSE);
return FALSE;
}
/* Now output the banner */
-smtp_printf("%s", ss);
+smtp_printf("%s", FALSE, string_from_gstring(ss));
+
+/* Attempt to see if we sent the banner before the last ACK of the 3-way
+handshake arrived. If so we must have managed a TFO. */
+
+#ifdef TCP_FASTOPEN
+tfo_in_check();
+#endif
+
return TRUE;
}
if (code > 0)
{
- smtp_printf("%d%c%s%s%s\r\n", code, (yield == 1)? '-' : ' ',
- (data == NULL)? US"" : data, (data == NULL)? US"" : US": ", errmess);
+ smtp_printf("%d%c%s%s%s\r\n", FALSE, code, yield == 1 ? '-' : ' ',
+ data ? data : US"", data ? US": " : US"", errmess);
if (yield == 1)
- smtp_printf("%d Too many syntax or protocol errors\r\n", code);
+ smtp_printf("%d Too many syntax or protocol errors\r\n", FALSE, code);
}
return yield;
-/*************************************************
-* Log incomplete transactions *
-*************************************************/
-
-/* This function is called after a transaction has been aborted by RSET, QUIT,
-connection drops or other errors. It logs the envelope information received
-so far in order to preserve address verification attempts.
-
-Argument: string to indicate what aborted the transaction
-Returns: nothing
-*/
-
-static void
-incomplete_transaction_log(uschar *what)
-{
-if (sender_address == NULL || /* No transaction in progress */
- !LOGGING(smtp_incomplete_transaction))
- return;
-
-/* Build list of recipients for logging */
-
-if (recipients_count > 0)
- {
- int i;
- raw_recipients = store_get(recipients_count * sizeof(uschar *));
- for (i = 0; i < recipients_count; i++)
- raw_recipients[i] = recipients_list[i].address;
- raw_recipients_count = recipients_count;
- }
-
-log_write(L_smtp_incomplete_transaction, LOG_MAIN|LOG_SENDER|LOG_RECIPIENTS,
- "%s incomplete transaction (%s)", host_and_ident(TRUE), what);
-}
-
-
-
-
/*************************************************
* Send SMTP response, possibly multiline *
*************************************************/
rcpt_in_progress = FALSE;
}
-/* Not output the message, splitting it up into multiple lines if necessary. */
+/* Now output the message, splitting it up into multiple lines if necessary.
+We only handle pipelining these responses as far as nonfinal/final groups,
+not the whole MAIL/RCPT/DATA response set. */
for (;;)
{
uschar *nl = Ustrchr(msg, '\n');
if (nl == NULL)
{
- smtp_printf("%.3s%c%.*s%s\r\n", code, final? ' ':'-', esclen, esc, msg);
+ smtp_printf("%.3s%c%.*s%s\r\n", !final, code, final ? ' ':'-', esclen, esc, msg);
return;
}
else if (nl[1] == 0 || no_multiline_responses)
{
- smtp_printf("%.3s%c%.*s%.*s\r\n", code, final? ' ':'-', esclen, esc,
+ smtp_printf("%.3s%c%.*s%.*s\r\n", !final, code, final ? ' ':'-', esclen, esc,
(int)(nl - msg), msg);
return;
}
else
{
- smtp_printf("%.3s-%.*s%.*s\r\n", code, esclen, esc, (int)(nl - msg), msg);
+ smtp_printf("%.3s-%.*s%.*s\r\n", TRUE, code, esclen, esc, (int)(nl - msg), msg);
msg = nl + 1;
while (isspace(*msg)) msg++;
}
/* This function is called when acl_check() fails. As well as calls from within
this module, it is called from receive.c for an ACL after DATA. It sorts out
-logging the incident, and sets up the error response. A message containing
+logging the incident, and sends the error response. A message containing
newlines is turned into a multiline SMTP response, but for logging, only the
first line is used.
uschar *sender_info = US"";
uschar *what =
#ifdef WITH_CONTENT_SCAN
- (where == ACL_WHERE_MIME)? US"during MIME ACL checks" :
+ where == ACL_WHERE_MIME ? US"during MIME ACL checks" :
#endif
- (where == ACL_WHERE_PREDATA)? US"DATA" :
- (where == ACL_WHERE_DATA)? US"after DATA" :
+ where == ACL_WHERE_PREDATA ? US"DATA" :
+ where == ACL_WHERE_DATA ? US"after DATA" :
#ifndef DISABLE_PRDR
- (where == ACL_WHERE_PRDR)? US"after DATA PRDR" :
+ where == ACL_WHERE_PRDR ? US"after DATA PRDR" :
#endif
- (smtp_cmd_data == NULL)?
- string_sprintf("%s in \"connect\" ACL", acl_wherenames[where]) :
- string_sprintf("%s %s", acl_wherenames[where], smtp_cmd_data);
+ smtp_cmd_data ?
+ string_sprintf("%s %s", acl_wherenames[where], smtp_cmd_data) :
+ string_sprintf("%s in \"connect\" ACL", acl_wherenames[where]);
if (drop) rc = FAIL;
failures, but not defers. However, always log it for defer, and log it for fail
unless the sender_verify_fail log selector has been turned off. */
-if (sender_verified_failed != NULL &&
+if (sender_verified_failed &&
!testflag(sender_verified_failed, af_sverify_told))
{
BOOL save_rcpt_in_progress = rcpt_in_progress;
(sender_verified_failed->message == NULL)? US"" :
string_sprintf(": %s", sender_verified_failed->message));
- if (rc == FAIL && sender_verified_failed->user_message != NULL)
+ if (rc == FAIL && sender_verified_failed->user_message)
smtp_respond(smtp_code, codelen, FALSE, string_sprintf(
testflag(sender_verified_failed, af_verify_pmfail)?
"Postmaster verification failed while checking <%s>\n%s\n"
/* Sort out text for logging */
-log_msg = (log_msg == NULL)? US"" : string_sprintf(": %s", log_msg);
-lognl = Ustrchr(log_msg, '\n');
-if (lognl != NULL) *lognl = 0;
+log_msg = log_msg ? string_sprintf(": %s", log_msg) : US"";
+if ((lognl = Ustrchr(log_msg, '\n'))) *lognl = 0;
/* Send permanent failure response to the command, but the code used isn't
always a 5xx one - see comments at the start of this function. If the original
rc was FAIL_DROP we drop the connection and yield 2. */
-if (rc == FAIL) smtp_respond(smtp_code, codelen, TRUE, (user_msg == NULL)?
- US"Administrative prohibition" : user_msg);
+if (rc == FAIL)
+ smtp_respond(smtp_code, codelen, TRUE,
+ user_msg ? user_msg : US"Administrative prohibition");
/* Send temporary failure response to the command. Don't give any details,
unless acl_temp_details is set. This is TRUE for a callout defer, a "defer"
be re-implemented in a tidier fashion. */
else
- {
- if (acl_temp_details && user_msg != NULL)
+ if (acl_temp_details && user_msg)
{
- if (smtp_return_error_details &&
- sender_verified_failed != NULL &&
- sender_verified_failed->message != NULL)
- {
+ if ( smtp_return_error_details
+ && sender_verified_failed
+ && sender_verified_failed->message
+ )
smtp_respond(smtp_code, codelen, FALSE, sender_verified_failed->message);
- }
+
smtp_respond(smtp_code, codelen, TRUE, user_msg);
}
else
smtp_respond(smtp_code, codelen, TRUE,
US"Temporary local problem - please try later");
- }
/* Log the incident to the logs that are specified by log_reject_target
(default main, reject). This can be empty to suppress logging of rejections. If
if (log_reject_target != 0)
{
#ifdef SUPPORT_TLS
- uschar * tls = s_tlslog(NULL, NULL, NULL);
+ gstring * g = s_tlslog(NULL);
+ uschar * tls = string_from_gstring(g);
if (!tls) tls = US"";
#else
uschar * tls = US"";
#endif
- log_write(0, log_reject_target, "%s%s%s %s%srejected %s%s",
+ log_write(where == ACL_WHERE_CONNECT ? L_connection_reject : 0,
+ log_reject_target, "%s%s%s %s%srejected %s%s",
LOGGING(dnssec) && sender_host_dnssec ? US" DS" : US"",
host_and_ident(TRUE),
tls,
passed to this function.
In case things go wrong while processing this function, causing an error that
-may re-enter this funtion, there is a recursion check.
+may re-enter this function, there is a recursion check.
Arguments:
reason What $smtp_notquit_reason will be set to in the ACL;
/* Call the not-QUIT ACL, if there is one, unless no reason is given. */
-if (acl_smtp_notquit != NULL && reason != NULL)
+if (acl_smtp_notquit && reason)
{
smtp_notquit_reason = reason;
- rc = acl_check(ACL_WHERE_NOTQUIT, NULL, acl_smtp_notquit, &user_msg,
- &log_msg);
- if (rc == ERROR)
+ if ((rc = acl_check(ACL_WHERE_NOTQUIT, NULL, acl_smtp_notquit, &user_msg,
+ &log_msg)) == ERROR)
log_write(0, LOG_MAIN|LOG_PANIC, "ACL for not-QUIT returned ERROR: %s",
log_msg);
}
warning, just in case. Note that string_vformat() still leaves a complete
string, even if it is incomplete. */
-if (code != NULL && defaultrespond != NULL)
+if (code && defaultrespond)
{
- if (user_msg == NULL)
+ if (user_msg)
+ smtp_respond(code, 3, TRUE, user_msg);
+ else
{
uschar buffer[128];
va_list ap;
va_start(ap, defaultrespond);
if (!string_vformat(buffer, sizeof(buffer), CS defaultrespond, ap))
log_write(0, LOG_MAIN|LOG_PANIC, "string too large in smtp_notquit_exit()");
- smtp_printf("%s %s\r\n", code, buffer);
+ smtp_printf("%s %s\r\n", FALSE, code, buffer);
va_end(ap);
}
- else
- smtp_respond(code, 3, TRUE, user_msg);
mac_smtp_fflush();
}
}
HDEBUG(D_receive) debug_printf("getting IP address for %s\n",
sender_helo_name);
- rc = host_find_bydns(&h, NULL, HOST_FIND_BY_A,
+ rc = host_find_bydns(&h, NULL, HOST_FIND_BY_A | HOST_FIND_BY_AAAA,
NULL, NULL, NULL, &d, NULL, NULL);
if (rc == HOST_FOUND || rc == HOST_FOUND_LOCAL)
for (hh = &h; hh; hh = hh->next)
{
if (set_id) authenticated_id = string_copy_malloc(set_id);
sender_host_authenticated = au->name;
+ sender_host_auth_pubname = au->public_name;
authentication_failed = FALSE;
authenticated_fail_id = NULL; /* Impossible to already be set? */
*recipient = rewrite_address_qualify(*recipient, TRUE);
return rd;
}
-smtp_printf("501 %s: recipient address must contain a domain\r\n",
+smtp_printf("501 %s: recipient address must contain a domain\r\n", FALSE,
smtp_cmd_data);
log_write(L_smtp_syntax_error,
LOG_MAIN|LOG_REJECT, "unqualified %s rejected: <%s> %s%s",
+static void
+smtp_quit_handler(uschar ** user_msgp, uschar ** log_msgp)
+{
+HAD(SCH_QUIT);
+incomplete_transaction_log(US"QUIT");
+if (acl_smtp_quit)
+ {
+ int rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, user_msgp, log_msgp);
+ if (rc == ERROR)
+ log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
+ *log_msgp);
+ }
+if (*user_msgp)
+ smtp_respond(US"221", 3, TRUE, *user_msgp);
+else
+ smtp_printf("221 %s closing connection\r\n", FALSE, smtp_active_hostname);
+
+#ifdef SUPPORT_TLS
+tls_close(TRUE, TLS_SHUTDOWN_NOWAIT);
+#endif
+
+log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
+ smtp_get_connection_info());
+}
+
+
+static void
+smtp_rset_handler(void)
+{
+HAD(SCH_RSET);
+incomplete_transaction_log(US"RSET");
+smtp_printf("250 Reset OK\r\n", FALSE);
+cmd_list[CMD_LIST_RSET].is_mail_cmd = FALSE;
+}
+
+
+
/*************************************************
* Initialize for SMTP incoming message *
*************************************************/
smtp_reset(reset_point);
message_ended = END_NOTSTARTED;
+chunking_state = chunking_offered ? CHUNKING_OFFERED : CHUNKING_NOT_OFFERED;
+
cmd_list[CMD_LIST_RSET].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_HELO].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
#ifdef SUPPORT_TLS
cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = TRUE;
-cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
#endif
/* Set the local signal handler for SIGTERM - it tries to end off tidily */
void (*oldsignal)(int);
pid_t pid;
int start, end, sender_domain, recipient_domain;
- int ptr, size, rc;
+ int rc;
int c;
auth_instance *au;
uschar *orcpt = NULL;
int flags;
+ gstring * g;
-#if defined(SUPPORT_TLS) && defined(AUTH_TLS)
+#ifdef AUTH_TLS
/* Check once per STARTTLS or SSL-on-connect for a TLS AUTH */
if ( tls_in.active >= 0
&& tls_in.peercert
)
{
cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = FALSE;
- if ( acl_smtp_auth
- && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
- &user_msg, &log_msg)) != OK
- )
- {
- done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
- continue;
- }
for (au = auths; au; au = au->next)
if (strcmpic(US"tls", au->driver_name) == 0)
{
- smtp_cmd_data = NULL;
-
- if (smtp_in_auth(au, &s, &ss) == OK)
- { DEBUG(D_auth) debug_printf("tls auth succeeded\n"); }
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
else
- { DEBUG(D_auth) debug_printf("tls auth not succeeded\n"); }
+ {
+ smtp_cmd_data = NULL;
+
+ if (smtp_in_auth(au, &s, &ss) == OK)
+ { DEBUG(D_auth) debug_printf("tls auth succeeded\n"); }
+ else
+ { DEBUG(D_auth) debug_printf("tls auth not succeeded\n"); }
+ }
break;
}
}
#endif
- switch(smtp_read_command(TRUE))
+#ifdef TCP_QUICKACK
+ if (smtp_in) /* Avoid pure-ACKs while in cmd pingpong phase */
+ (void) setsockopt(fileno(smtp_in), IPPROTO_TCP, TCP_QUICKACK,
+ US &off, sizeof(off));
+#endif
+
+ switch(smtp_read_command(TRUE, GETC_BUFFER_UNLIMITED))
{
/* The AUTH command is not permitted to occur inside a transaction, and may
occur successfully only once per connection. Actually, that isn't quite
{
c = smtp_in_auth(au, &s, &ss);
- smtp_printf("%s\r\n", s);
+ smtp_printf("%s\r\n", FALSE, s);
if (c != OK)
log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
au->name, host_and_ident(FALSE), ss);
if (!check_helo(smtp_cmd_data))
{
- smtp_printf("501 Syntactically invalid %s argument(s)\r\n", hello);
+ smtp_printf("501 Syntactically invalid %s argument(s)\r\n", FALSE, hello);
log_write(0, LOG_MAIN|LOG_REJECT, "rejected %s from %s: syntactically "
"invalid argument(s): %s", hello, host_and_ident(FALSE),
/* Force a reverse lookup if HELO quoted something in helo_lookup_domains
because otherwise the log can be confusing. */
- if (sender_host_name == NULL &&
- (deliver_domain = sender_helo_name, /* set $domain */
- match_isinlist(sender_helo_name, CUSS &helo_lookup_domains, 0,
+ if ( !sender_host_name
+ && (deliver_domain = sender_helo_name, /* set $domain */
+ match_isinlist(sender_helo_name, CUSS &helo_lookup_domains, 0,
&domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) == OK)
(void)host_name_lookup();
{
if (helo_required)
{
- smtp_printf("%d %s argument does not match calling host\r\n",
+ smtp_printf("%d %s argument does not match calling host\r\n", FALSE,
tempfail? 451 : 550, hello);
log_write(0, LOG_MAIN|LOG_REJECT, "%srejected \"%s %s\" from %s",
tempfail? "temporarily " : "",
}
}
-#ifdef EXPERIMENTAL_SPF
+#ifdef SUPPORT_SPF
/* set up SPF context */
spf_init(sender_helo_name, sender_host_address);
#endif
&user_msg, &log_msg)) != OK)
{
done = smtp_handle_acl_fail(ACL_WHERE_HELO, rc, user_msg, log_msg);
- sender_helo_name = NULL;
+ if (sender_helo_name)
+ {
+ store_free(sender_helo_name);
+ sender_helo_name = NULL;
+ }
host_build_sender_fullhost(); /* Rebuild */
break;
}
#endif
smtp_code = US"250 "; /* Default response code plus space*/
- if (user_msg == NULL)
+ if (!user_msg)
{
s = string_sprintf("%.3s %s Hello %s%s%s",
smtp_code,
smtp_active_hostname,
- (sender_ident == NULL)? US"" : sender_ident,
- (sender_ident == NULL)? US"" : US" at ",
- (sender_host_name == NULL)? sender_helo_name : sender_host_name);
-
- ptr = Ustrlen(s);
- size = ptr + 1;
+ sender_ident ? sender_ident : US"",
+ sender_ident ? US" at " : US"",
+ sender_host_name ? sender_host_name : sender_helo_name);
+ g = string_cat(NULL, s);
- if (sender_host_address != NULL)
+ if (sender_host_address)
{
- s = string_catn(s, &size, &ptr, US" [", 2);
- s = string_cat (s, &size, &ptr, sender_host_address);
- s = string_catn(s, &size, &ptr, US"]", 1);
+ g = string_catn(g, US" [", 2);
+ g = string_cat (g, sender_host_address);
+ g = string_catn(g, US"]", 1);
}
}
"newlines: message truncated: %s", string_printing(s));
*ss = 0;
}
- ptr = Ustrlen(s);
- size = ptr + 1;
+ g = string_cat(NULL, s);
}
- s = string_catn(s, &size, &ptr, US"\r\n", 2);
+ g = string_catn(g, US"\r\n", 2);
/* If we received EHLO, we must create a multiline response which includes
the functions supported. */
if (esmtp)
{
- s[3] = '-';
+ g->s[3] = '-';
/* I'm not entirely happy with this, as an MTA is supposed to check
that it has enough room to accept a message of maximum size before
{
sprintf(CS big_buffer, "%.3s-SIZE %d\r\n", smtp_code,
thismessage_size_limit);
- s = string_cat(s, &size, &ptr, big_buffer);
+ g = string_cat(g, big_buffer);
}
else
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-SIZE\r\n", 7);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-SIZE\r\n", 7);
}
/* Exim does not do protocol conversion or data conversion. It is 8-bit
if (accept_8bitmime)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-8BITMIME\r\n", 11);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-8BITMIME\r\n", 11);
}
/* Advertise DSN support if configured to do so. */
if (verify_check_host(&dsn_advertise_hosts) != FAIL)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-DSN\r\n", 6);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-DSN\r\n", 6);
dsn_advertised = TRUE;
}
- /* Advertise ETRN if there's an ACL checking whether a host is
- permitted to issue it; a check is made when any host actually tries. */
+ /* Advertise ETRN/VRFY/EXPN if there's are ACL checking whether a host is
+ permitted to issue them; a check is made when any host actually tries. */
- if (acl_smtp_etrn != NULL)
+ if (acl_smtp_etrn)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-ETRN\r\n", 7);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-ETRN\r\n", 7);
}
-
- /* Advertise EXPN if there's an ACL checking whether a host is
- permitted to issue it; a check is made when any host actually tries. */
-
- if (acl_smtp_expn != NULL)
+ if (acl_smtp_vrfy)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-VRFY\r\n", 7);
+ }
+ if (acl_smtp_expn)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-EXPN\r\n", 7);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-EXPN\r\n", 7);
}
/* Exim is quite happy with pipelining, so let the other end know that
if (pipelining_enable &&
verify_check_host(&pipelining_advertise_hosts) == OK)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-PIPELINING\r\n", 13);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-PIPELINING\r\n", 13);
sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
pipelining_advertised = TRUE;
}
them in either case in the AUTH command. */
if ( auths
-#if defined(SUPPORT_TLS) && defined(AUTH_TLS)
+#ifdef AUTH_TLS
&& !sender_host_authenticated
#endif
&& verify_check_host(&auth_advertise_hosts) == OK
auth_instance *au;
BOOL first = TRUE;
for (au = auths; au; au = au->next)
- if (au->server && (au->advertise_condition == NULL ||
- expand_check_condition(au->advertise_condition, au->name,
- US"authenticator")))
+ {
+ au->advertised = FALSE;
+ if (au->server)
{
- int saveptr;
- if (first)
+ DEBUG(D_auth+D_expand) debug_printf_indent(
+ "Evaluating advertise_condition for %s athenticator\n",
+ au->public_name);
+ if ( !au->advertise_condition
+ || expand_check_condition(au->advertise_condition, au->name,
+ US"authenticator")
+ )
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-AUTH", 5);
- first = FALSE;
- auth_advertised = TRUE;
+ int saveptr;
+ if (first)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-AUTH", 5);
+ first = FALSE;
+ auth_advertised = TRUE;
+ }
+ saveptr = g->ptr;
+ g = string_catn(g, US" ", 1);
+ g = string_cat (g, au->public_name);
+ while (++saveptr < g->ptr) g->s[saveptr] = toupper(g->s[saveptr]);
+ au->advertised = TRUE;
}
- saveptr = ptr;
- s = string_catn(s, &size, &ptr, US" ", 1);
- s = string_cat (s, &size, &ptr, au->public_name);
- while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]);
- au->advertised = TRUE;
}
- else
- au->advertised = FALSE;
+ }
- if (!first) s = string_catn(s, &size, &ptr, US"\r\n", 2);
+ if (!first) g = string_catn(g, US"\r\n", 2);
}
/* RFC 3030 CHUNKING */
if (verify_check_host(&chunking_advertise_hosts) != FAIL)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-CHUNKING\r\n", 11);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-CHUNKING\r\n", 11);
+ chunking_offered = TRUE;
chunking_state = CHUNKING_OFFERED;
}
if (tls_in.active < 0 &&
verify_check_host(&tls_advertise_hosts) != FAIL)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-STARTTLS\r\n", 11);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-STARTTLS\r\n", 11);
tls_advertised = TRUE;
}
#endif
/* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
if (prdr_enable)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-PRDR\r\n", 7);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-PRDR\r\n", 7);
}
#endif
if ( accept_8bitmime
&& verify_check_host(&smtputf8_advertise_hosts) != FAIL)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-SMTPUTF8\r\n", 11);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-SMTPUTF8\r\n", 11);
smtputf8_advertised = TRUE;
}
#endif
/* Finish off the multiline reply with one that is always available. */
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US" HELP\r\n", 7);
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US" HELP\r\n", 7);
}
/* Terminate the string (for debug), write it, and note that HELO/EHLO
has been seen. */
- s[ptr] = 0;
-
#ifdef SUPPORT_TLS
- if (tls_in.active >= 0) (void)tls_write(TRUE, s, ptr); else
+ if (tls_in.active >= 0) (void)tls_write(TRUE, g->s, g->ptr, FALSE); else
#endif
{
- int i = fwrite(s, 1, ptr, smtp_out); i = i; /* compiler quietening */
+ int i = fwrite(g->s, 1, g->ptr, smtp_out); i = i; /* compiler quietening */
}
DEBUG(D_receive)
{
uschar *cr;
- while ((cr = Ustrchr(s, '\r')) != NULL) /* lose CRs */
- memmove(cr, cr + 1, (ptr--) - (cr - s));
- debug_printf("SMTP>> %s", s);
+
+ (void) string_from_gstring(g);
+ while ((cr = Ustrchr(g->s, '\r')) != NULL) /* lose CRs */
+ memmove(cr, cr + 1, (g->ptr--) - (cr - g->s));
+ debug_printf("SMTP>> %s", g->s);
}
helo_seen = TRUE;
: pnormal)
+ (tls_in.active >= 0 ? pcrpted : 0)
];
+ cancel_cutthrough_connection(TRUE, US"sent EHLO response");
smtp_reset(reset_point);
toomany = FALSE;
break; /* HELO/EHLO */
if (helo_required && !helo_seen)
{
- smtp_printf("503 HELO or EHLO required\r\n");
+ smtp_printf("503 HELO or EHLO required\r\n", FALSE);
log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL from %s: no "
"HELO/EHLO given", host_and_ident(FALSE));
break;
if (smtp_accept_max_per_connection > 0 &&
smtp_mailcmd_count > smtp_accept_max_per_connection)
{
- smtp_printf("421 too many messages in this connection\r\n");
+ smtp_printf("421 too many messages in this connection\r\n", FALSE);
log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL command %s: too many "
"messages in one connection", host_and_ident(TRUE));
break;
/* Reset for start of message - even if this is going to fail, we
obviously need to throw away any previous data. */
+ cancel_cutthrough_connection(TRUE, US"MAIL received");
smtp_reset(reset_point);
toomany = FALSE;
sender_data = recipient_data = NULL;
US"invalid data for AUTH");
goto COMMAND_LOOP;
}
- if (acl_smtp_mailauth == NULL)
+ if (!acl_smtp_mailauth)
{
ignore_msg = US"client not authenticated";
- rc = (sender_host_authenticated != NULL)? OK : FAIL;
+ rc = sender_host_authenticated ? OK : FAIL;
}
else
{
case ENV_MAIL_OPT_UTF8:
if (smtputf8_advertised)
{
+ int old_pool = store_pool;
+
DEBUG(D_receive) debug_printf("smtputf8 requested\n");
message_smtputf8 = allow_utf8_domains = TRUE;
+ store_pool = POOL_PERM;
received_protocol = string_sprintf("utf8%s", received_protocol);
+ store_pool = old_pool;
}
break;
#endif
if (thismessage_size_limit > 0 && message_size > thismessage_size_limit)
{
- smtp_printf("552 Message size exceeds maximum permitted\r\n");
+ smtp_printf("552 Message size exceeds maximum permitted\r\n", FALSE);
log_write(L_size_reject,
LOG_MAIN|LOG_REJECT, "rejected MAIL FROM:<%s> %s: "
"message too big: size%s=%d max=%d",
(smtp_check_spool_space && message_size >= 0)?
message_size + 5000 : 0))
{
- smtp_printf("452 Space shortage, please try later\r\n");
+ smtp_printf("452 Space shortage, please try later\r\n", FALSE);
sender_address = NULL;
break;
}
}
else
{
- smtp_printf("501 %s: sender address must contain a domain\r\n",
+ smtp_printf("501 %s: sender address must contain a domain\r\n", FALSE,
smtp_cmd_data);
log_write(L_smtp_syntax_error,
LOG_MAIN|LOG_REJECT,
if (rc == OK || rc == DISCARD)
{
+ BOOL more = pipeline_response();
+
if (!user_msg)
- smtp_printf("%s%s%s", US"250 OK",
+ smtp_printf("%s%s%s", more, US"250 OK",
#ifndef DISABLE_PRDR
prdr_requested ? US", PRDR Requested" : US"",
#else
{
if (pipelining_advertised && last_was_rej_mail)
{
- smtp_printf("503 sender not yet given\r\n");
+ smtp_printf("503 sender not yet given\r\n", FALSE);
was_rej_mail = TRUE;
}
else
friends now makes it absolutely clear that it means *mailbox*. Consequently
we must always qualify this address, regardless. */
- if (recipient_domain == 0)
+ if (!recipient_domain)
if (!(recipient_domain = qualify_recipient(&recipient, smtp_cmd_data,
US"recipient")))
{
if (recipients_max_reject)
{
rcpt_fail_count++;
- smtp_printf("552 too many recipients\r\n");
+ smtp_printf("552 too many recipients\r\n", FALSE);
if (!toomany)
log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: message "
"rejected: sender=<%s> %s", sender_address, host_and_ident(TRUE));
else
{
rcpt_defer_count++;
- smtp_printf("452 too many recipients\r\n");
+ smtp_printf("452 too many recipients\r\n", FALSE);
if (!toomany)
log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: excess "
"temporarily rejected: sender=<%s> %s", sender_address,
there may be a delay in this, re-check for a synchronization error
afterwards, unless pipelining was advertised. */
- if (recipients_discarded) rc = DISCARD; else
- {
- rc = acl_check(ACL_WHERE_RCPT, recipient, acl_smtp_rcpt, &user_msg,
- &log_msg);
- if (rc == OK && !pipelining_advertised && !check_sync())
+ if (recipients_discarded)
+ rc = DISCARD;
+ else
+ if ( (rc = acl_check(ACL_WHERE_RCPT, recipient, acl_smtp_rcpt, &user_msg,
+ &log_msg)) == OK
+ && !pipelining_advertised && !check_sync())
goto SYNC_FAILURE;
- }
/* The ACL was happy */
if (rc == OK)
{
- if (user_msg == NULL) smtp_printf("250 Accepted\r\n");
- else smtp_user_msg(US"250", user_msg);
+ BOOL more = pipeline_response();
+
+ if (user_msg)
+ smtp_user_msg(US"250", user_msg);
+ else
+ smtp_printf("250 Accepted\r\n", more);
receive_add_recipient(recipient, -1);
/* Set the dsn flags in the recipients_list */
else if (rc == DISCARD)
{
- if (user_msg == NULL) smtp_printf("250 Accepted\r\n");
- else smtp_user_msg(US"250", user_msg);
+ if (user_msg)
+ smtp_user_msg(US"250", user_msg);
+ else
+ smtp_printf("250 Accepted\r\n", FALSE);
rcpt_fail_count++;
discarded = TRUE;
log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> RCPT %s: "
if (sscanf(CS smtp_cmd_data, "%u %n", &chunking_datasize, &n) < 1)
{
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ done = synprot_error(L_smtp_protocol_error, 501, NULL,
US"missing size for BDAT command");
break;
}
chunking_state = strcmpic(smtp_cmd_data+n, US"LAST") == 0
? CHUNKING_LAST : CHUNKING_ACTIVE;
+ chunking_data_left = chunking_datasize;
+ DEBUG(D_receive) debug_printf("chunking state %d, %d bytes\n",
+ (int)chunking_state, chunking_data_left);
+
+ /* push the current receive_* function on the "stack", and
+ replace them by bdat_getc(), which in turn will use the lwr_receive_*
+ functions to do the dirty work. */
+ lwr_receive_getc = receive_getc;
+ lwr_receive_getbuf = receive_getbuf;
+ lwr_receive_ungetc = receive_ungetc;
+
+ receive_getc = bdat_getc;
+ receive_ungetc = bdat_ungetc;
+
+ dot_ends = FALSE;
- DEBUG(D_any)
- debug_printf("chunking state %d\n", (int)chunking_state);
goto DATA_BDAT;
}
case DATA_CMD:
HAD(SCH_DATA);
+ dot_ends = TRUE;
DATA_BDAT: /* Common code for DATA and BDAT */
if (!discarded && recipients_count <= 0)
smtp_respond(code, 3, FALSE, rcpt_smtp_response);
}
if (pipelining_advertised && last_was_rcpt)
- smtp_printf("503 Valid RCPT command must precede %s\r\n",
+ smtp_printf("503 Valid RCPT command must precede %s\r\n", FALSE,
smtp_names[smtp_connection_had[smtp_ch_index-1]]);
else
done = synprot_error(L_smtp_protocol_error, 503, NULL,
smtp_connection_had[smtp_ch_index-1] == SCH_DATA
? US"valid RCPT command must precede DATA"
: US"valid RCPT command must precede BDAT");
+
+ if (chunking_state > CHUNKING_OFFERED)
+ bdat_flush_data();
break;
}
{
sender_address = NULL; /* This will allow a new MAIL without RSET */
sender_address_unrewritten = NULL;
- smtp_printf("554 Too many recipients\r\n");
+ smtp_printf("554 Too many recipients\r\n", FALSE);
break;
}
- /* No go-ahead output for BDAT */
-
- if (smtp_connection_had[smtp_ch_index-1] == SCH_BDAT)
- {
- rc = OK;
- break;
- }
-
- /* If there is an ACL, re-check the synchronization afterwards, since the
- ACL may have delayed. To handle cutthrough delivery enforce a dummy call
- to get the DATA command sent. */
-
- if (acl_smtp_predata == NULL && cutthrough.fd < 0)
- rc = OK;
+ if (chunking_state > CHUNKING_OFFERED)
+ rc = OK; /* No predata ACL or go-ahead output for BDAT */
else
{
- uschar * acl= acl_smtp_predata ? acl_smtp_predata : US"accept";
- enable_dollar_recipients = TRUE;
- rc = acl_check(ACL_WHERE_PREDATA, NULL, acl, &user_msg,
- &log_msg);
- enable_dollar_recipients = FALSE;
- if (rc == OK && !check_sync()) goto SYNC_FAILURE;
- }
+ /* If there is an ACL, re-check the synchronization afterwards, since the
+ ACL may have delayed. To handle cutthrough delivery enforce a dummy call
+ to get the DATA command sent. */
- if (rc == OK)
- {
- uschar * code;
- code = US"354";
- if (user_msg == NULL)
- smtp_printf("%s Enter message, ending with \".\" on a line by itself\r\n", code);
- else smtp_user_msg(code, user_msg);
- done = 3;
- message_ended = END_NOTENDED; /* Indicate in middle of data */
+ if (acl_smtp_predata == NULL && cutthrough.fd < 0)
+ rc = OK;
+ else
+ {
+ uschar * acl = acl_smtp_predata ? acl_smtp_predata : US"accept";
+ enable_dollar_recipients = TRUE;
+ rc = acl_check(ACL_WHERE_PREDATA, NULL, acl, &user_msg,
+ &log_msg);
+ enable_dollar_recipients = FALSE;
+ if (rc == OK && !check_sync())
+ goto SYNC_FAILURE;
+
+ if (rc != OK)
+ { /* Either the ACL failed the address, or it was deferred. */
+ done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg);
+ break;
+ }
+ }
+
+ if (user_msg)
+ smtp_user_msg(US"354", user_msg);
+ else
+ smtp_printf(
+ "354 Enter message, ending with \".\" on a line by itself\r\n", FALSE);
}
- /* Either the ACL failed the address, or it was deferred. */
+#ifdef TCP_QUICKACK
+ if (smtp_in) /* all ACKs needed to ramp window up for bulk data */
+ (void) setsockopt(fileno(smtp_in), IPPROTO_TCP, TCP_QUICKACK,
+ US &on, sizeof(on));
+#endif
+ done = 3;
+ message_ended = END_NOTENDED; /* Indicate in middle of data */
- else
- done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg);
break;
if (!(address = parse_extract_address(smtp_cmd_data, &errmess,
&start, &end, &recipient_domain, FALSE)))
{
- smtp_printf("501 %s\r\n", errmess);
+ smtp_printf("501 %s\r\n", FALSE, errmess);
break;
}
- if (recipient_domain == 0)
+ if (!recipient_domain)
if (!(recipient_domain = qualify_recipient(&address, smtp_cmd_data,
US"verify")))
break;
break;
}
- smtp_printf("%s\r\n", s);
+ smtp_printf("%s\r\n", FALSE, s);
}
break;
}
/* RFC 2487 is not clear on when this command may be sent, though it
does state that all information previously obtained from the client
- must be discarded if a TLS session is started. It seems reasonble to
+ must be discarded if a TLS session is started. It seems reasonable to
do an implied RSET when STARTTLS is received. */
incomplete_transaction_log(US"STARTTLS");
+ cancel_cutthrough_connection(TRUE, US"STARTTLS received");
smtp_reset(reset_point);
toomany = FALSE;
cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = FALSE;
/* and if TLS is already active, tls_server_start() should fail */
}
- /* There is nothing we value in the input buffer and if TLS is succesfully
+ /* There is nothing we value in the input buffer and if TLS is successfully
negotiated, we won't use this buffer again; if TLS fails, we'll just read
fresh content into it. The buffer contains arbitrary content from an
untrusted remote source; eg: NOOP <shellcode>\r\nSTARTTLS\r\n
It seems safest to just wipe away the content rather than leave it as a
target to jump to. */
- memset(smtp_inbuffer, 0, in_buffer_size);
+ memset(smtp_inbuffer, 0, IN_BUFFER_SIZE);
/* Attempt to start up a TLS session, and if successful, discard all
knowledge that was obtained previously. At least, that's what the RFC says,
We must allow for an extra EHLO command and an extra AUTH command after
STARTTLS that don't add to the nonmail command count. */
- if ((rc = tls_server_start(tls_require_ciphers)) == OK)
+ s = NULL;
+ if ((rc = tls_server_start(tls_require_ciphers, &s)) == OK)
{
if (!tls_remember_esmtp)
helo_seen = esmtp = auth_advertised = pipelining_advertised = FALSE;
cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_AUTH].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
- if (sender_helo_name != NULL)
+ if (sender_helo_name)
{
store_free(sender_helo_name);
sender_helo_name = NULL;
+ (tls_in.active >= 0 ? pcrpted : 0)
];
- sender_host_authenticated = NULL;
+ sender_host_auth_pubname = sender_host_authenticated = NULL;
authenticated_id = NULL;
sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
DEBUG(D_tls) debug_printf("TLS active\n");
break; /* Successful STARTTLS */
}
+ else
+ (void) smtp_log_tls_fail(s);
/* Some local configuration problem was discovered before actually trying
to do a TLS handshake; give a temporary error. */
- else if (rc == DEFER)
+ if (rc == DEFER)
{
- smtp_printf("454 TLS currently unavailable\r\n");
+ smtp_printf("454 TLS currently unavailable\r\n", FALSE);
break;
}
set, but we must still reject all incoming commands. */
DEBUG(D_tls) debug_printf("TLS failed to start\n");
- while (done <= 0)
+ while (done <= 0) switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
{
- switch(smtp_read_command(FALSE))
- {
- case EOF_CMD:
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
- smtp_get_connection_info());
- smtp_notquit_exit(US"tls-failed", NULL, NULL);
- done = 2;
- break;
-
- /* It is perhaps arguable as to which exit ACL should be called here,
- but as it is probably a situation that almost never arises, it
- probably doesn't matter. We choose to call the real QUIT ACL, which in
- some sense is perhaps "right". */
+ case EOF_CMD:
+ log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
+ smtp_get_connection_info());
+ smtp_notquit_exit(US"tls-failed", NULL, NULL);
+ done = 2;
+ break;
- case QUIT_CMD:
- user_msg = NULL;
- if (acl_smtp_quit != NULL)
- {
- rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg,
- &log_msg);
- if (rc == ERROR)
- log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
- log_msg);
- }
- if (user_msg == NULL)
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
- else
- smtp_respond(US"221", 3, TRUE, user_msg);
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
- smtp_get_connection_info());
- done = 2;
- break;
+ /* It is perhaps arguable as to which exit ACL should be called here,
+ but as it is probably a situation that almost never arises, it
+ probably doesn't matter. We choose to call the real QUIT ACL, which in
+ some sense is perhaps "right". */
+
+ case QUIT_CMD:
+ user_msg = NULL;
+ if ( acl_smtp_quit
+ && ((rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg,
+ &log_msg)) == ERROR))
+ log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
+ log_msg);
+ if (user_msg)
+ smtp_respond(US"221", 3, TRUE, user_msg);
+ else
+ smtp_printf("221 %s closing connection\r\n", FALSE, smtp_active_hostname);
+ log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
+ smtp_get_connection_info());
+ done = 2;
+ break;
- default:
- smtp_printf("554 Security failure\r\n");
- break;
- }
+ default:
+ smtp_printf("554 Security failure\r\n", FALSE);
+ break;
}
- tls_close(TRUE, TRUE);
+ tls_close(TRUE, TLS_SHUTDOWN_NOWAIT);
break;
#endif
message. */
case QUIT_CMD:
- HAD(SCH_QUIT);
- incomplete_transaction_log(US"QUIT");
- if (acl_smtp_quit != NULL)
- {
- rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg, &log_msg);
- if (rc == ERROR)
- log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
- log_msg);
- }
- if (user_msg == NULL)
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
- else
- smtp_respond(US"221", 3, TRUE, user_msg);
-
- #ifdef SUPPORT_TLS
- tls_close(TRUE, TRUE);
- #endif
-
+ smtp_quit_handler(&user_msg, &log_msg);
done = 2;
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
- smtp_get_connection_info());
break;
case RSET_CMD:
- HAD(SCH_RSET);
- incomplete_transaction_log(US"RSET");
+ smtp_rset_handler();
+ cancel_cutthrough_connection(TRUE, US"RSET received");
smtp_reset(reset_point);
toomany = FALSE;
- smtp_printf("250 Reset OK\r\n");
- cmd_list[CMD_LIST_RSET].is_mail_cmd = FALSE;
break;
case NOOP_CMD:
HAD(SCH_NOOP);
- smtp_printf("250 OK\r\n");
+ smtp_printf("250 OK\r\n", FALSE);
break;
case HELP_CMD:
HAD(SCH_HELP);
- smtp_printf("214-Commands supported:\r\n");
+ smtp_printf("214-Commands supported:\r\n", TRUE);
{
uschar buffer[256];
buffer[0] = 0;
verify_check_host(&tls_advertise_hosts) != FAIL)
Ustrcat(buffer, " STARTTLS");
#endif
- Ustrcat(buffer, " HELO EHLO MAIL RCPT DATA");
+ Ustrcat(buffer, " HELO EHLO MAIL RCPT DATA BDAT");
Ustrcat(buffer, " NOOP QUIT RSET HELP");
if (acl_smtp_etrn != NULL) Ustrcat(buffer, " ETRN");
if (acl_smtp_expn != NULL) Ustrcat(buffer, " EXPN");
if (acl_smtp_vrfy != NULL) Ustrcat(buffer, " VRFY");
- smtp_printf("214%s\r\n", buffer);
+ smtp_printf("214%s\r\n", FALSE, buffer);
}
break;
just drop the call rather than sending QUIT, and it clutters up the logs.
*/
- if (sender_address != NULL || recipients_count > 0)
- log_write(L_lost_incoming_connection,
- LOG_MAIN,
- "unexpected %s while reading SMTP command from %s%s",
- sender_host_unknown? "EOF" : "disconnection",
- host_and_ident(FALSE), smtp_read_error);
+ if (sender_address || recipients_count > 0)
+ log_write(L_lost_incoming_connection, LOG_MAIN,
+ "unexpected %s while reading SMTP command from %s%s%s D=%s",
+ sender_host_unknown ? "EOF" : "disconnection",
+ tcp_in_fastopen && !tcp_in_fastopen_logged ? US"TFO " : US"",
+ host_and_ident(FALSE), smtp_read_error,
+ string_timesince(&smtp_connection_start)
+ );
- else log_write(L_smtp_connection, LOG_MAIN, "%s lost%s",
- smtp_get_connection_info(), smtp_read_error);
+ else
+ log_write(L_smtp_connection, LOG_MAIN, "%s %slost%s D=%s",
+ smtp_get_connection_info(),
+ tcp_in_fastopen && !tcp_in_fastopen_logged ? US"TFO " : US"",
+ smtp_read_error,
+ string_timesince(&smtp_connection_start)
+ );
done = 1;
break;
case ETRN_CMD:
HAD(SCH_ETRN);
- if (sender_address != NULL)
+ if (sender_address)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
US"ETRN is not permitted inside a transaction");
since that is strictly the only kind of ETRN that can be implemented
according to the RFC. */
- if (smtp_etrn_command != NULL)
+ if (smtp_etrn_command)
{
uschar *error;
BOOL rc;
{
log_write(0, LOG_MAIN|LOG_PANIC, "failed to set up ETRN command: %s",
error);
- smtp_printf("458 Internal failure\r\n");
+ smtp_printf("458 Internal failure\r\n", FALSE);
break;
}
}
debug_printf("ETRN command is: %s\n", etrn_command);
debug_printf("ETRN command execution skipped\n");
}
- if (user_msg == NULL) smtp_printf("250 OK\r\n");
+ if (user_msg == NULL) smtp_printf("250 OK\r\n", FALSE);
else smtp_user_msg(US"250", user_msg);
break;
}
if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
{
- smtp_printf("458 Already processing %s\r\n", smtp_cmd_data);
+ smtp_printf("458 Already processing %s\r\n", FALSE, smtp_cmd_data);
break;
}
{
log_write(0, LOG_MAIN|LOG_PANIC, "fork of process for ETRN failed: %s",
strerror(errno));
- smtp_printf("458 Unable to fork process\r\n");
+ smtp_printf("458 Unable to fork process\r\n", FALSE);
if (smtp_etrn_serialize) enq_end(etrn_serialize_key);
}
else
{
- if (user_msg == NULL) smtp_printf("250 OK\r\n");
+ if (user_msg == NULL) smtp_printf("250 OK\r\n", FALSE);
else smtp_user_msg(US"250", user_msg);
}
case BADCHAR_CMD:
done = synprot_error(L_smtp_syntax_error, 0, NULL, /* Just logs */
- US"NULL character(s) present (shown as '?')");
- smtp_printf("501 NULL characters are not allowed in SMTP commands\r\n");
+ US"NUL character(s) present (shown as '?')");
+ smtp_printf("501 NUL characters are not allowed in SMTP commands\r\n", FALSE);
break;
case BADSYN_CMD:
SYNC_FAILURE:
- if (smtp_inend >= smtp_inbuffer + in_buffer_size)
- smtp_inend = smtp_inbuffer + in_buffer_size - 1;
+ if (smtp_inend >= smtp_inbuffer + IN_BUFFER_SIZE)
+ smtp_inend = smtp_inbuffer + IN_BUFFER_SIZE - 1;
c = smtp_inend - smtp_inptr;
- if (c > 150) c = 150;
+ if (c > 150) c = 150; /* limit logged amount */
smtp_inptr[c] = 0;
incomplete_transaction_log(US"sync failure");
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol synchronization error "
#ifdef SUPPORT_PROXY
case PROXY_FAIL_IGNORE_CMD:
- smtp_printf("503 Command refused, required Proxy negotiation failed\r\n");
+ smtp_printf("503 Command refused, required Proxy negotiation failed\r\n", FALSE);
break;
#endif
return done - 2; /* Convert yield values */
}
+
+
+gstring *
+authres_smtpauth(gstring * g)
+{
+if (!sender_host_authenticated)
+ return g;
+
+g = string_append(g, 2, US";\n\tauth=pass (", sender_host_auth_pubname);
+
+if (Ustrcmp(sender_host_auth_pubname, "tls") != 0)
+ g = string_append(g, 2, US") smtp.auth=", authenticated_id);
+else if (authenticated_id)
+ g = string_append(g, 2, US") x509.auth=", authenticated_id);
+else
+ g = string_catn(g, US") reason=x509.auth", 17);
+
+if (authenticated_sender)
+ g = string_append(g, 2, US" smtp.mailfrom=", authenticated_sender);
+return g;
+}
+
+
+
/* vi: aw ai sw=2
*/
/* End of smtp_in.c */
git://git.exim.org / users / jgh / exim.git / blobdiff