ACL: Disallow '/' characters in queue names specified for "queue="

[users/heiko/exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 6fb150428ca1a09f8154f29660507cd536c67551..c06fb9c4fdf5ca73bc1b4aff489b241b66edadf2 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -45,7 +45,7 @@
 . Update the Copyright year (only) when changing content.
 . /////////////////////////////////////////////////////////////////////////////
 
 . Update the Copyright year (only) when changing content.
 . /////////////////////////////////////////////////////////////////////////////
 

-.set previousversion "4.89"
+.set previousversion "4.90"

 .include ./local_params
 
 .set ACL "access control lists (ACLs)"
 .include ./local_params
 
 .set ACL "access control lists (ACLs)"


@@ -1667,6 +1667,9 @@ Symbolic links to the sources are installed in this directory, which is where
 the actual building takes place. In most cases, Exim can discover the machine
 architecture and operating system for itself, but the defaults can be
 overridden if necessary.
 the actual building takes place. In most cases, Exim can discover the machine
 architecture and operating system for itself, but the defaults can be
 overridden if necessary.

+.cindex compiler requirements
+.cindex compiler version
+A C99-capable compiler will be required for the build.

 
 
 .section "PCRE library" "SECTpcre"
 
 
 .section "PCRE library" "SECTpcre"


@@ -2788,6 +2791,11 @@ files or databases you are using, you must exit and restart Exim before trying
 the same lookup again. Otherwise, because each Exim process caches the results
 of lookups, you will just get the same result as before.
 
 the same lookup again. Otherwise, because each Exim process caches the results
 of lookups, you will just get the same result as before.
 

+Macro processing is done on lines before string-expansion: new macros can be
+defined and macros will be expanded.
+Because macros in the config file are often used for secrets, those are only
+available to admin users.
+

 .vitem &%-bem%&&~<&'filename'&>
 .oindex "&%-bem%&"
 .cindex "testing" "string expansion"
 .vitem &%-bem%&&~<&'filename'&>
 .oindex "&%-bem%&"
 .cindex "testing" "string expansion"


@@ -3857,14 +3865,12 @@ This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option, and passes on the fact that the
 host to which Exim is connected supports TLS encryption.
 
 by Exim in conjunction with the &%-MC%& option, and passes on the fact that the
 host to which Exim is connected supports TLS encryption.
 

-.new

 .vitem &%-MCt%&&~<&'IP&~address'&>&~<&'port'&>&~<&'cipher'&>
 .oindex "&%-MCt%&"
 This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option, and passes on the fact that the
 connection is being proxied by a parent process for handling TLS encryption.
 The arguments give the local address and port being proxied, and the TLS cipher.
 .vitem &%-MCt%&&~<&'IP&~address'&>&~<&'port'&>&~<&'cipher'&>
 .oindex "&%-MCt%&"
 This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option, and passes on the fact that the
 connection is being proxied by a parent process for handling TLS encryption.
 The arguments give the local address and port being proxied, and the TLS cipher.

-.wen

 
 .vitem &%-Mc%&&~<&'message&~id'&>&~<&'message&~id'&>&~...
 .oindex "&%-Mc%&"
 
 .vitem &%-Mc%&&~<&'message&~id'&>&~<&'message&~id'&>&~...
 .oindex "&%-Mc%&"


@@ -4274,7 +4280,7 @@ or &%-bs%& is used. For &%-bh%&, the protocol is forced to one of the standard
 SMTP protocol names (see the description of &$received_protocol$& in section
 &<<SECTexpvar>>&). For &%-bs%&, the protocol is always &"local-"& followed by
 one of those same names. For &%-bS%& (batched SMTP) however, the protocol can
 SMTP protocol names (see the description of &$received_protocol$& in section
 &<<SECTexpvar>>&). For &%-bs%&, the protocol is always &"local-"& followed by
 one of those same names. For &%-bS%& (batched SMTP) however, the protocol can

-be set by &%-oMr%&.
+be set by &%-oMr%&. Repeated use of this option is not supported.

 
 .vitem &%-oMs%&&~<&'host&~name'&>
 .oindex "&%-oMs%&"
 
 .vitem &%-oMs%&&~<&'host&~name'&>
 .oindex "&%-oMs%&"


@@ -4374,6 +4380,7 @@ host name and its colon can be omitted when only the protocol is to be set.
 Note the Exim already has two private options, &%-pd%& and &%-ps%&, that refer
 to embedded Perl. It is therefore impossible to set a protocol value of &`d`&
 or &`s`& using this option (but that does not seem a real limitation).
 Note the Exim already has two private options, &%-pd%& and &%-ps%&, that refer
 to embedded Perl. It is therefore impossible to set a protocol value of &`d`&
 or &`s`& using this option (but that does not seem a real limitation).

+Repeated use of this option is not supported.

 
 .vitem &%-q%&
 .oindex "&%-q%&"
 
 .vitem &%-q%&
 .oindex "&%-q%&"


@@ -9963,7 +9970,7 @@ a regular expression, and a substitution string. For example:
 ${sg{abcdefabcdef}{abc}{xyz}}
 .endd
 yields &"xyzdefxyzdef"&. Because all three arguments are expanded before use,
 ${sg{abcdefabcdef}{abc}{xyz}}
 .endd
 yields &"xyzdefxyzdef"&. Because all three arguments are expanded before use,

-if any $ or \ characters are required in the regular expression or in the
+if any $, } or \ characters are required in the regular expression or in the

 substitution string, they have to be escaped. For example:
 .code
 ${sg{abcdef}{^(...)(...)\$}{\$2\$1}}
 substitution string, they have to be escaped. For example:
 .code
 ${sg{abcdef}{^(...)(...)\$}{\$2\$1}}


@@ -10114,7 +10121,15 @@ character. For example:
 .code
 ${addresses:>& Chief <ceo@up.stairs>, sec@base.ment (dogsbody)}
 .endd
 .code
 ${addresses:>& Chief <ceo@up.stairs>, sec@base.ment (dogsbody)}
 .endd

-expands to &`ceo@up.stairs&&sec@base.ment`&. Compare the &*address*& (singular)
+expands to &`ceo@up.stairs&&sec@base.ment`&. The string is expanded
+first, so if the expanded string starts with >, it may change the output
+separator unintentionally. This can be avoided by setting the output
+separator explicitly:
+.code
+${addresses:>:$h_from:}
+.endd
+
+Compare the &*address*& (singular)

 expansion item, which extracts the working address from a single RFC2822
 address. See the &*filter*&, &*map*&, and &*reduce*& items for ways of
 processing lists.
 expansion item, which extracts the working address from a single RFC2822
 address. See the &*filter*&, &*map*&, and &*reduce*& items for ways of
 processing lists.


@@ -11031,12 +11046,10 @@ colon-separated components are permitted, each containing from one to four
 hexadecimal digits. There may be fewer than eight components if an empty
 component (adjacent colons) is present. Only one empty component is permitted.
 
 hexadecimal digits. There may be fewer than eight components if an empty
 component (adjacent colons) is present. Only one empty component is permitted.
 

-.new

 &*Note*&: The checks used to be just on the form of the address; actual numerical
 values were not considered. Thus, for example, 999.999.999.999 passed the IPv4
 check.
 This is no longer the case.
 &*Note*&: The checks used to be just on the form of the address; actual numerical
 values were not considered. Thus, for example, 999.999.999.999 passed the IPv4
 check.
 This is no longer the case.

-.wen

 
 The main use of these tests is to distinguish between IP addresses and
 host names, or between IPv4 and IPv6 addresses. For example, you could use
 
 The main use of these tests is to distinguish between IP addresses and
 host names, or between IPv4 and IPv6 addresses. For example, you could use


@@ -11646,8 +11659,11 @@ contain the trailing slash. If &$config_file$& does not contain a slash,
 .vindex "&$config_file$&"
 The name of the main configuration file Exim is using.
 
 .vindex "&$config_file$&"
 The name of the main configuration file Exim is using.
 

+.vitem &$dkim_verify_status$& &&&
+Results of DKIM verification.
+For details see chapter &<<CHAPdkim>>&.
+

 .vitem &$dkim_cur_signer$& &&&
 .vitem &$dkim_cur_signer$& &&&

-       &$dkim_verify_status$& &&&

        &$dkim_verify_reason$& &&&
        &$dkim_domain$& &&&
        &$dkim_identity$& &&&
        &$dkim_verify_reason$& &&&
        &$dkim_domain$& &&&
        &$dkim_identity$& &&&


@@ -12067,9 +12083,7 @@ when the ACL &%malware%& condition is true (see section &<<SECTscanvirus>>&).
 This variable contains the number of bytes in the longest line that was
 received as part of the message, not counting the line termination
 character(s).
 This variable contains the number of bytes in the longest line that was
 received as part of the message, not counting the line termination
 character(s).

-.new

 It is not valid if the &%spool_files_wireformat%& option is used.
 It is not valid if the &%spool_files_wireformat%& option is used.

-.wen

 
 .vitem &$message_age$&
 .cindex "message" "age of"
 
 .vitem &$message_age$&
 .cindex "message" "age of"


@@ -12112,11 +12126,9 @@ in bytes. The count starts from the character after the blank line that
 separates the body from the header. Newlines are included in the count. See
 also &$message_size$&, &$body_linecount$&, and &$body_zerocount$&.
 
 separates the body from the header. Newlines are included in the count. See
 also &$message_size$&, &$body_linecount$&, and &$body_zerocount$&.
 

-.new

 If the spool file is wireformat
 (see the &%spool_files_wireformat%& main option)
 the CRLF line-terminators are included in the count.
 If the spool file is wireformat
 (see the &%spool_files_wireformat%& main option)
 the CRLF line-terminators are included in the count.

-.wen

 
 .vitem &$message_exim_id$&
 .vindex "&$message_exim_id$&"
 
 .vitem &$message_exim_id$&
 .vindex "&$message_exim_id$&"


@@ -12168,9 +12180,7 @@ deny message   = Too many lines in message header
 In the MAIL and RCPT ACLs, the value is zero because at that stage the
 message has not yet been received.
 
 In the MAIL and RCPT ACLs, the value is zero because at that stage the
 message has not yet been received.
 

-.new

 This variable is not valid if the &%spool_files_wireformat%& option is used.
 This variable is not valid if the &%spool_files_wireformat%& option is used.

-.wen

 
 .vitem &$message_size$&
 .cindex "size" "of message"
 
 .vitem &$message_size$&
 .cindex "size" "of message"


@@ -12792,6 +12802,13 @@ argument, that is, the text that follows the command name, with leading white
 space removed. Following the introduction of &$smtp_command$&, this variable is
 somewhat redundant, but is retained for backwards compatibility.
 
 space removed. Following the introduction of &$smtp_command$&, this variable is
 somewhat redundant, but is retained for backwards compatibility.
 

+.vitem &$smtp_command_history$&
+.cindex SMTP "command history"
+.vindex "&$smtp_command_history$&"
+A comma-separated list (with no whitespace) of the most-recent SMTP commands
+received, in time-order left to right.  Only a limited number of commands
+are remembered.
+

 .vitem &$smtp_count_at_connection_start$&
 .vindex "&$smtp_count_at_connection_start$&"
 This variable is set greater than zero only in processes spawned by the Exim
 .vitem &$smtp_count_at_connection_start$&
 .vindex "&$smtp_count_at_connection_start$&"
 This variable is set greater than zero only in processes spawned by the Exim


@@ -12878,6 +12895,9 @@ It is only useful as the argument of a
 &%certextract%& expansion item, &%md5%&, &%sha1%& or &%sha256%& operator,
 or a &%def%& condition.
 
 &%certextract%& expansion item, &%md5%&, &%sha1%& or &%sha256%& operator,
 or a &%def%& condition.
 

+&*Note*&: Under current versions of OpenSSL, when a list of more than one
+file is used for &%tls_certificate%&, this variable is not reliable.
+

 .vitem &$tls_in_peercert$&
 .vindex "&$tls_in_peercert$&"
 This variable refers to the certificate presented by the peer of an
 .vitem &$tls_in_peercert$&
 .vindex "&$tls_in_peercert$&"
 This variable refers to the certificate presented by the peer of an


@@ -14462,13 +14482,11 @@ The CHUNKING extension (RFC3030) will be advertised in the EHLO message to
 these hosts.
 Hosts may use the BDAT command as an alternate to DATA.
 
 these hosts.
 Hosts may use the BDAT command as an alternate to DATA.
 

-.new

 .option commandline_checks_require_admin main boolean &`false`&
 .cindex "restricting access to features"
 This option restricts various basic checking features to require an
 administrative user.
 This affects most of the &%-b*%& options, such as &%-be%&.
 .option commandline_checks_require_admin main boolean &`false`&
 .cindex "restricting access to features"
 This option restricts various basic checking features to require an
 administrative user.
 This affects most of the &%-b*%& options, such as &%-be%&.

-.wen

 
 .option debug_store main boolean &`false`&
 .cindex debugging "memory corruption"
 
 .option debug_store main boolean &`false`&
 .cindex debugging "memory corruption"


@@ -16847,7 +16865,6 @@ as failures in the configuration file.
 By using this option to override the compiled-in path, it is possible to run
 tests of Exim without using the standard spool.
 
 By using this option to override the compiled-in path, it is possible to run
 tests of Exim without using the standard spool.
 

-.new

 .option spool_wireformat main boolean false
 .cindex "spool directory" "file formats"
 If this option is set, Exim may for some messages use an alternate format
 .option spool_wireformat main boolean false
 .cindex "spool directory" "file formats"
 If this option is set, Exim may for some messages use an alternate format


@@ -16871,7 +16888,6 @@ will need to be aware of the potential different format.
 Using any of the ACL conditions noted will negate the reception benefit
 (as a Unix-mbox-format file is contructed for them).
 The transimssion benefit is maintained.
 Using any of the ACL conditions noted will negate the reception benefit
 (as a Unix-mbox-format file is contructed for them).
 The transimssion benefit is maintained.

-.wen

 
 .option sqlite_lock_timeout main time 5s
 .cindex "sqlite lookup type" "lock timeout"
 
 .option sqlite_lock_timeout main time 5s
 .cindex "sqlite lookup type" "lock timeout"


@@ -17079,11 +17095,13 @@ using the &%tls_certificate%& option.  If TLS support for incoming connections
 is not required the &%tls_advertise_hosts%& option should be set empty.
 
 
 is not required the &%tls_advertise_hosts%& option should be set empty.
 
 

-.option tls_certificate main string&!! unset
+.option tls_certificate main string list&!! unset

 .cindex "TLS" "server certificate; location of"
 .cindex "certificate" "server, location of"
 .cindex "TLS" "server certificate; location of"
 .cindex "certificate" "server, location of"

-The value of this option is expanded, and must then be the absolute path to a
-file which contains the server's certificates. The server's private key is also
+The value of this option is expanded, and must then be a list of absolute paths to
+files which contains the server's certificates.  Commonly only one file is
+needed.
+The server's private key is also

 assumed to be in this file if &%tls_privatekey%& is unset. See chapter
 &<<CHAPTLS>>& for further details.
 
 assumed to be in this file if &%tls_privatekey%& is unset. See chapter
 &<<CHAPTLS>>& for further details.
 


@@ -17092,6 +17110,15 @@ receiving incoming messages as a server. If you want to supply certificates for
 use when sending messages as a client, you must set the &%tls_certificate%&
 option in the relevant &(smtp)& transport.
 
 use when sending messages as a client, you must set the &%tls_certificate%&
 option in the relevant &(smtp)& transport.
 

+&*Note*&: If you use filenames based on IP addresses, change the list
+separator in the usual way to avoid confusion under IPv6.
+
+&*Note*&: Under current versions of OpenSSL, when a list of more than one
+file is used, the &$tls_in_ourcert$& veriable is unreliable.
+
+&*Note*&: OCSP stapling is not usable under OpenSSL
+when a list of more than one file is used.
+

 If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then
 if the OpenSSL build supports TLS extensions and the TLS client sends the
 Server Name Indication extension, then this option and others documented in
 If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then
 if the OpenSSL build supports TLS extensions and the TLS client sends the
 Server Name Indication extension, then this option and others documented in


@@ -17104,7 +17131,15 @@ generated for every connection.
 .cindex "TLS" "server certificate revocation list"
 .cindex "certificate" "revocation list for server"
 This option specifies a certificate revocation list. The expanded value must
 .cindex "TLS" "server certificate revocation list"
 .cindex "certificate" "revocation list for server"
 This option specifies a certificate revocation list. The expanded value must

-be the name of a file that contains a CRL in PEM format.
+be the name of a file that contains CRLs in PEM format.
+
+.new
+Under OpenSSL the option can specify a directory with CRL files.
+
+&*Note:*& Under OpenSSL the option must, if given, supply a CRL
+for each signing element of the certificate chain (i.e. all but the leaf).
+For the file variant this can be multiple PEM blocks in the one file.
+.wen

 
 See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
 
 
 See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
 


@@ -17231,6 +17266,12 @@ Certificate Authority.
 
 Usable for GnuTLS 3.4.4 or 3.3.17 or OpenSSL 1.1.0 (or later).
 
 
 Usable for GnuTLS 3.4.4 or 3.3.17 or OpenSSL 1.1.0 (or later).
 

+.new
+For GnuTLS 3.5.6 or later the expanded value of this option can be a list
+of files, to match a list given for the &%tls_certificate%& option.
+The ordering of the two lists must match.
+.wen
+

 
 .option tls_on_connect_ports main "string list" unset
 .cindex SSMTP
 
 .option tls_on_connect_ports main "string list" unset
 .cindex SSMTP


@@ -17242,10 +17283,11 @@ further details, see section &<<SECTsupobssmt>>&.
 
 
 
 
 
 

-.option tls_privatekey main string&!! unset
+.option tls_privatekey main string list&!! unset

 .cindex "TLS" "server private key; location of"
 .cindex "TLS" "server private key; location of"

-The value of this option is expanded, and must then be the absolute path to a
-file which contains the server's private key. If this option is unset, or if
+The value of this option is expanded, and must then be a list of absolute paths to
+files which contains the server's private keys.
+If this option is unset, or if

 the expansion is forced to fail, or the result is an empty string, the private
 key is assumed to be in the same file as the server's certificates. See chapter
 &<<CHAPTLS>>& for further details.
 the expansion is forced to fail, or the result is an empty string, the private
 key is assumed to be in the same file as the server's certificates. See chapter
 &<<CHAPTLS>>& for further details.


@@ -19468,6 +19510,10 @@ instead of TRY_AGAIN. That is why the default action is to try a DNS
 lookup first. Only if that gives a definite &"no such host"& is the local
 function called.
 
 lookup first. Only if that gives a definite &"no such host"& is the local
 function called.
 

+&*Compatibility*&: From Exim 4.85 until fixed for 4.90, there was an
+inadvertent constraint that a transport name as an option had to be the last
+option specified.
+

 
 
 If no IP address for a host can be found, what happens is controlled by the
 
 
 If no IP address for a host can be found, what happens is controlled by the


@@ -22127,10 +22173,14 @@ the obvious value which users understand most easily.
 
 The value of the option is expanded, and must then be a numerical value
 (decimal point allowed), optionally followed by one of the letters K, M, or G,
 
 The value of the option is expanded, and must then be a numerical value
 (decimal point allowed), optionally followed by one of the letters K, M, or G,

-for kilobytes, megabytes, or gigabytes. If Exim is running on a system with
+for kilobytes, megabytes, or gigabytes, optionally followed by a slash
+and further option modifiers. If Exim is running on a system with

 large file support (Linux and FreeBSD have this), mailboxes larger than 2G can
 be handled.
 
 large file support (Linux and FreeBSD have this), mailboxes larger than 2G can
 be handled.
 

+The option modifier &%no_check%& can be used to force delivery even if the over
+quota condition is met. The quota gets updated as usual.
+

 &*Note*&: A value of zero is interpreted as &"no quota"&.
 
 The expansion happens while Exim is running as root, before it changes uid for
 &*Note*&: A value of zero is interpreted as &"no quota"&.
 
 The expansion happens while Exim is running as root, before it changes uid for


@@ -22165,6 +22215,8 @@ can only be used if &%quota%& is also set. The value is expanded; an expansion
 failure causes delivery to be deferred. A value of zero is interpreted as
 &"no quota"&.
 
 failure causes delivery to be deferred. A value of zero is interpreted as
 &"no quota"&.
 

+The option modifier &%no_check%& can be used to force delivery even if the over
+quota condition is met. The quota gets updated as usual.

 
 .option quota_is_inclusive appendfile boolean true
 See &%quota%& above.
 
 .option quota_is_inclusive appendfile boolean true
 See &%quota%& above.


@@ -23775,7 +23827,9 @@ of the message. Its value must not be zero. See also &%final_timeout%&.
 .option dkim_private_key smtp string&!! unset
 .option dkim_canon smtp string&!! unset
 .option dkim_strict smtp string&!! unset
 .option dkim_private_key smtp string&!! unset
 .option dkim_canon smtp string&!! unset
 .option dkim_strict smtp string&!! unset

-.option dkim_sign_headers smtp string&!! unset
+.option dkim_sign_headers smtp string&!! "per RFC"
+.option dkim_hash smtp string&!! sha256
+.option dkim_identity smtp string&!! unset

 DKIM signing options.  For details see section &<<SECDKIMSIGN>>&.
 
 
 DKIM signing options.  For details see section &<<SECDKIMSIGN>>&.
 
 


@@ -24019,7 +24073,6 @@ been started will not be passed to a new delivery process for sending another
 message on the same connection. See section &<<SECTmulmessam>>& for an
 explanation of when this might be needed.
 
 message on the same connection. See section &<<SECTmulmessam>>& for an
 explanation of when this might be needed.
 

-.new

 .option hosts_noproxy_tls smtp "host list&!!" *
 .cindex "TLS" "passing connection"
 .cindex "multiple SMTP deliveries"
 .option hosts_noproxy_tls smtp "host list&!!" *
 .cindex "TLS" "passing connection"
 .cindex "multiple SMTP deliveries"


@@ -24035,7 +24088,6 @@ instead, and the original process maintains the TLS connection and proxies
 the SMTP connection from and to the new process and any subsequents.
 The new process has no access to TLS information, so cannot include it in
 logging.
 the SMTP connection from and to the new process and any subsequents.
 The new process has no access to TLS information, so cannot include it in
 logging.

-.wen

 
 
 
 
 
 


@@ -24114,7 +24166,7 @@ This option provides a list of servers to which, provided they announce
 CHUNKING support, Exim will attempt to use BDAT commands rather than DATA.
 BDAT will not be used in conjunction with a transport filter.
 
 CHUNKING support, Exim will attempt to use BDAT commands rather than DATA.
 BDAT will not be used in conjunction with a transport filter.
 

-.option hosts_try_fastopen smtp "host list!!" unset
+.option hosts_try_fastopen smtp "host list&!!" unset

 .cindex "fast open, TCP" "enabling, in client"
 .cindex "TCP Fast Open" "enabling, in client"
 .cindex "RFC 7413" "TCP Fast Open"
 .cindex "fast open, TCP" "enabling, in client"
 .cindex "TCP Fast Open" "enabling, in client"
 .cindex "RFC 7413" "TCP Fast Open"


@@ -24130,6 +24182,9 @@ as the initiator must present a cookie in the SYN segment.
 
 On (at least some) current Linux distributions the facility must be enabled
 in the kernel by the sysadmin before the support is usable.
 
 On (at least some) current Linux distributions the facility must be enabled
 in the kernel by the sysadmin before the support is usable.

+There is no option for control of the server side; if the system supports
+it it is always enebled.  Note that legthy operations in the connect ACL,
+such as DNSBL lookups, will still delay the emission of the SMTP banner.

 
 .option hosts_try_prdr smtp "host list&!!" *
 .cindex "PRDR" "enabling, optional in client"
 
 .option hosts_try_prdr smtp "host list&!!" *
 .cindex "PRDR" "enabling, optional in client"


@@ -27072,6 +27127,9 @@ When using OpenSSL, this option is ignored.
 (If an API is found to let OpenSSL be configured in this way,
 let the Exim Maintainers know and we'll likely use it).
 .next
 (If an API is found to let OpenSSL be configured in this way,
 let the Exim Maintainers know and we'll likely use it).
 .next

+With GnuTLS, if an explicit list is used for the &%tls_privatekey%& main option
+main option, it must be ordered to match the &%tls_certificate%& list.
+.next

 Some other recently added features may only be available in one or the other.
 This should be documented with the feature.  If the documentation does not
 explicitly state that the feature is infeasible in the other TLS
 Some other recently added features may only be available in one or the other.
 This should be documented with the feature.  If the documentation does not
 explicitly state that the feature is infeasible in the other TLS


@@ -27227,6 +27285,10 @@ tls_require_ciphers = ${if =={$received_port}{25}\
                            {HIGH:!MD5:!SHA1}}
 .endd
 
                            {HIGH:!MD5:!SHA1}}
 .endd
 

+This example will prefer ECDSA-authenticated ciphers over RSA ones:
+.code
+tls_require_ciphers = ECDSA:RSA:!COMPLEMENTOFDEFAULT
+.endd

 
 
 .section "Requiring specific ciphers or other parameters in GnuTLS" &&&
 
 
 .section "Requiring specific ciphers or other parameters in GnuTLS" &&&


@@ -27315,8 +27377,7 @@ from someone able to intercept the communication.
 
 Further protection requires some further configuration at the server end.
 
 
 Further protection requires some further configuration at the server end.
 

-It is rumoured that all existing clients that support TLS/SSL use RSA
-encryption. To make this work you need to set, in the server,
+To make TLS work you need to set, in the server,

 .code
 tls_certificate = /some/file/name
 tls_privatekey = /some/file/name
 .code
 tls_certificate = /some/file/name
 tls_privatekey = /some/file/name


@@ -27335,6 +27396,13 @@ is assumed to be the case. The certificate file may also contain intermediate
 certificates that need to be sent to the client to enable it to authenticate
 the server's certificate.
 
 certificates that need to be sent to the client to enable it to authenticate
 the server's certificate.
 

+For dual-stack (eg. RSA and ECDSA) configurations, these options can be
+colon-separated lists of file paths.  Ciphers using given authentication
+algorithms require the presence of a suitable certificate to supply the
+public-key.  The server selects among the certificates to present to the
+client depending on the selected cipher, hence the priority ordering for
+ciphers will affect which certificate is used.
+

 If you do not understand about certificates and keys, please try to find a
 source of this background information, which is not Exim-specific. (There are a
 few comments below in section &<<SECTcerandall>>&.)
 If you do not understand about certificates and keys, please try to find a
 source of this background information, which is not Exim-specific. (There are a
 few comments below in section &<<SECTcerandall>>&.)


@@ -27568,11 +27636,10 @@ if it requests it. If the server is Exim, it will request a certificate only if
 
 If the &%tls_verify_certificates%& option is set on the &(smtp)& transport, it
 specifies a collection of expected server certificates.
 
 If the &%tls_verify_certificates%& option is set on the &(smtp)& transport, it
 specifies a collection of expected server certificates.

-These may be the system default set (depending on library version),
-a file or,
-depending on library version, a directory,
-must name a file or,
-for OpenSSL only (not GnuTLS), a directory.
+These may be
+the system default set (depending on library version),
+a file,
+or (depending on library version) a directory.

 The client verifies the server's certificate
 against this collection, taking into account any revoked certificates that are
 in the list defined by &%tls_crl%&.
 The client verifies the server's certificate
 against this collection, taking into account any revoked certificates that are
 in the list defined by &%tls_crl%&.


@@ -27712,7 +27779,6 @@ built, then you have SNI support).
          "SECTmulmessam"
 .cindex "multiple SMTP deliveries with TLS"
 .cindex "TLS" "multiple message deliveries"
          "SECTmulmessam"
 .cindex "multiple SMTP deliveries with TLS"
 .cindex "TLS" "multiple message deliveries"

-.new

 Exim sends multiple messages down the same TCP/IP connection by starting up
 an entirely new delivery process for each message, passing the socket from
 one process to the next. This implementation does not fit well with the use
 Exim sends multiple messages down the same TCP/IP connection by starting up
 an entirely new delivery process for each message, passing the socket from
 one process to the next. This implementation does not fit well with the use


@@ -27725,7 +27791,6 @@ unencrypted data stream from and to the delivery processes.
 An older mode of operation can be enabled on a per-host basis by the
 &%hosts_noproxy_tls%& option on the &(smtp)& transport.  If the host matches
 this list the proxy process descibed above is not used; instead Exim
 An older mode of operation can be enabled on a per-host basis by the
 &%hosts_noproxy_tls%& option on the &(smtp)& transport.  If the host matches
 this list the proxy process descibed above is not used; instead Exim

-.wen

 shuts down an existing TLS session being run by the delivery process
 before passing the socket to a new process. The new process may then
 try to start a new TLS session, and if successful, may try to re-authenticate
 shuts down an existing TLS session being run by the delivery process
 before passing the socket to a new process. The new process may then
 try to start a new TLS session, and if successful, may try to re-authenticate


@@ -28933,6 +28998,8 @@ effect.
 
 
 .vitem &*queue*&&~=&~<&'text'&>
 
 
 .vitem &*queue*&&~=&~<&'text'&>

+.cindex "&%queue%& ACL modifier"
+.cindex "named queues" "selecting in ACL"

 This modifier specifies the use of a named queue for spool files
 for the message.
 It can only be used before the message is received (i.e. not in
 This modifier specifies the use of a named queue for spool files
 for the message.
 It can only be used before the message is received (i.e. not in


@@ -28956,6 +29023,7 @@ This modifier puts a value into one of the ACL variables (see section
 
 
 .vitem &*udpsend*&&~=&~<&'parameters'&>
 
 
 .vitem &*udpsend*&&~=&~<&'parameters'&>

+.cindex "UDP communications"

 This modifier sends a UDP packet, for purposes such as statistics
 collection or behaviour monitoring. The parameters are expanded, and
 the result of the expansion must be a colon-separated list consisting
 This modifier sends a UDP packet, for purposes such as statistics
 collection or behaviour monitoring. The parameters are expanded, and
 the result of the expansion must be a colon-separated list consisting


@@ -29055,11 +29123,9 @@ and cannot depend on content of received headers.
 Note also that headers cannot be
 modified by any of the post-data ACLs (DATA, MIME and DKIM).
 Headers may be modified by routers (subject to the above) and transports.
 Note also that headers cannot be
 modified by any of the post-data ACLs (DATA, MIME and DKIM).
 Headers may be modified by routers (subject to the above) and transports.

-.new

 The Received-By: header is generated as soon as the body reception starts,
 rather than the traditional time after the full message is received;
 this will affect the timestamp.
 The Received-By: header is generated as soon as the body reception starts,
 rather than the traditional time after the full message is received;
 this will affect the timestamp.

-.wen

 
 All the usual ACLs are called; if one results in the message being
 rejected, all effort spent in delivery (including the costs on
 
 All the usual ACLs are called; if one results in the message being
 rejected, all effort spent in delivery (including the costs on


@@ -30995,7 +31061,6 @@ need to use this option unless you know that the called hosts make use of the
 sender when checking recipients. If used indiscriminately, it reduces the
 usefulness of callout caching.
 
 sender when checking recipients. If used indiscriminately, it reduces the
 usefulness of callout caching.
 

-.new

 .vitem &*hold*&
 This option applies to recipient callouts only. For example:
 .code
 .vitem &*hold*&
 This option applies to recipient callouts only. For example:
 .code


@@ -31010,7 +31075,6 @@ The advantage is only gained if there are no callout cache hits
 if the use_sender option is used,
 if neither the random nor the use_postmaster option is used,
 and if no other callouts intervene.
 if the use_sender option is used,
 if neither the random nor the use_postmaster option is used,
 and if no other callouts intervene.

-.wen

 .endlist
 
 If you use any of the parameters that set a non-empty sender for the MAIL
 .endlist
 
 If you use any of the parameters that set a non-empty sender for the MAIL


@@ -31244,6 +31308,7 @@ address and some time-based randomizing information. The &%prvs%& expansion
 item creates a signed address, and the &%prvscheck%& expansion item checks one.
 The syntax of these expansion items is described in section
 &<<SECTexpansionitems>>&.
 item creates a signed address, and the &%prvscheck%& expansion item checks one.
 The syntax of these expansion items is described in section
 &<<SECTexpansionitems>>&.

+The validity period on signed addresses is seven days.

 
 As an example, suppose the secret per-address keys are stored in an MySQL
 database. A query to look up the key for an address could be defined as a macro
 
 As an example, suppose the secret per-address keys are stored in an MySQL
 database. A query to look up the key for an address could be defined as a macro


@@ -31647,7 +31712,6 @@ av_scanner = f-protd:localhost 10200-10204
 .endd
 If you omit the argument, the default values show above are used.
 
 .endd
 If you omit the argument, the default values show above are used.
 

-.new

 .vitem &%f-prot6d%&
 .cindex "virus scanners" "f-prot6d"
 The f-prot6d scanner is accessed using the FPSCAND protocol over TCP.
 .vitem &%f-prot6d%&
 .cindex "virus scanners" "f-prot6d"
 The f-prot6d scanner is accessed using the FPSCAND protocol over TCP.


@@ -31657,7 +31721,6 @@ For example:
 av_scanner = f-prot6d:localhost 10200
 .endd
 If you omit the argument, the default values show above are used.
 av_scanner = f-prot6d:localhost 10200
 .endd
 If you omit the argument, the default values show above are used.

-.wen

 
 .vitem &%fsecure%&
 .cindex "virus scanners" "F-Secure"
 
 .vitem &%fsecure%&
 .cindex "virus scanners" "F-Secure"


@@ -31702,14 +31765,16 @@ an address (which may be an IP address and port, or the path of a Unix socket),
 a commandline to send (may include a single %s which will be replaced with
 the path to the mail file to be scanned),
 an RE to trigger on from the returned data,
 a commandline to send (may include a single %s which will be replaced with
 the path to the mail file to be scanned),
 an RE to trigger on from the returned data,

-an RE to extract malware_name from the returned data.
+and an RE to extract malware_name from the returned data.

 For example:
 .code
 For example:
 .code

-av_scanner = sock:127.0.0.1 6001:%s:(SPAM|VIRUS):(.*)\$
+av_scanner = sock:127.0.0.1 6001:%s:(SPAM|VIRUS):(.*)$

 .endd
 .endd

-Default for the socket specifier is &_/tmp/malware.sock_&.
-Default for the commandline is &_%s\n_&.
-Both regular-expressions are required.
+Note that surrounding whitespace is stripped from each option, meaning
+there is no way to specify a trailing newline.
+The socket specifier and both regular-expressions are required.
+Default for the commandline is &_%s\n_& (note this does have a trailing newline);
+specify an empty element to get this.

 
 .vitem &%sophie%&
 .cindex "virus scanners" "Sophos and Sophie"
 
 .vitem &%sophie%&
 .cindex "virus scanners" "Sophos and Sophie"


@@ -32549,15 +32614,11 @@ C variables are as follows:
 .vlist
 .vitem &*int&~body_linecount*&
 This variable contains the number of lines in the message's body.
 .vlist
 .vitem &*int&~body_linecount*&
 This variable contains the number of lines in the message's body.

-.new

 It is not valid if the &%spool_files_wireformat%& option is used.
 It is not valid if the &%spool_files_wireformat%& option is used.

-.wen

 
 .vitem &*int&~body_zerocount*&
 This variable contains the number of binary zero bytes in the message's body.
 
 .vitem &*int&~body_zerocount*&
 This variable contains the number of binary zero bytes in the message's body.

-.new

 It is not valid if the &%spool_files_wireformat%& option is used.
 It is not valid if the &%spool_files_wireformat%& option is used.

-.wen

 
 .vitem &*unsigned&~int&~debug_selector*&
 This variable is set to zero when no debugging is taking place. Otherwise, it
 
 .vitem &*unsigned&~int&~debug_selector*&
 This variable is set to zero when no debugging is taking place. Otherwise, it


@@ -35881,12 +35942,10 @@ SMTP RCPT commands in one transaction) the second and subsequent addresses are
 flagged with &`->`& instead of &`=>`&. When two or more messages are delivered
 down a single SMTP connection, an asterisk follows the IP address in the log
 lines for the second and subsequent messages.
 flagged with &`->`& instead of &`=>`&. When two or more messages are delivered
 down a single SMTP connection, an asterisk follows the IP address in the log
 lines for the second and subsequent messages.

-.new

 When two or more messages are delivered down a single TLS connection, the
 DNS and some TLS-related information logged for the first message delivered
 will not be present in the log lines for the second and subsequent messages.
 TLS cipher information is still available.
 When two or more messages are delivered down a single TLS connection, the
 DNS and some TLS-related information logged for the first message delivered
 will not be present in the log lines for the second and subsequent messages.
 TLS cipher information is still available.

-.wen

 
 .cindex "delivery" "cutthrough; logging"
 .cindex "cutthrough" "logging"
 
 .cindex "delivery" "cutthrough; logging"
 .cindex "cutthrough" "logging"


@@ -36013,6 +36072,7 @@ the following table:
 &`SNI `&        server name indication from TLS client hello
 &`ST  `&        shadow transport name
 &`T   `&        on &`<=`& lines: message subject (topic)
 &`SNI `&        server name indication from TLS client hello
 &`ST  `&        shadow transport name
 &`T   `&        on &`<=`& lines: message subject (topic)

+&`TFO `&        connection took advantage of TCP Fast Open

 &`    `&        on &`=>`& &`**`& and &`==`& lines: transport name
 &`U   `&        local user or RFC 1413 identity
 &`X   `&        TLS cipher suite
 &`    `&        on &`=>`& &`**`& and &`==`& lines: transport name
 &`U   `&        local user or RFC 1413 identity
 &`X   `&        TLS cipher suite


@@ -36094,6 +36154,7 @@ selection marked by asterisks:
 &` incoming_interface         `&  local interface on <= and => lines
 &` incoming_port              `&  remote port on <= lines
 &`*lost_incoming_connection   `&  as it says (includes timeouts)
 &` incoming_interface         `&  local interface on <= and => lines
 &` incoming_port              `&  remote port on <= lines
 &`*lost_incoming_connection   `&  as it says (includes timeouts)

+&` millisec                   `&  millisecond timestamps and QT,DT,D times

 &` outgoing_interface         `&  local interface on => lines
 &` outgoing_port              `&  add remote port to => lines
 &`*queue_run                  `&  start and end queue runs
 &` outgoing_interface         `&  local interface on => lines
 &` outgoing_port              `&  add remote port to => lines
 &`*queue_run                  `&  start and end queue runs


@@ -36183,6 +36244,8 @@ process is started because &%queue_only%& is set or &%-odq%& was used.
 .cindex "log" "delivery duration"
 &%deliver_time%&: For each delivery, the amount of real time it has taken to
 perform the actual delivery is logged as DT=<&'time'&>, for example, &`DT=1s`&.
 .cindex "log" "delivery duration"
 &%deliver_time%&: For each delivery, the amount of real time it has taken to
 perform the actual delivery is logged as DT=<&'time'&>, for example, &`DT=1s`&.

+If millisecond logging is enabled, short times will be shown with greater
+precision, eg. &`DT=0.304`&.

 .next
 .cindex "log" "message size on delivery"
 .cindex "size" "of message"
 .next
 .cindex "log" "message size on delivery"
 .cindex "size" "of message"


@@ -36258,6 +36321,12 @@ important with the widening use of NAT (see RFC 2505).
 &%lost_incoming_connection%&: A log line is written when an incoming SMTP
 connection is unexpectedly dropped.
 .next
 &%lost_incoming_connection%&: A log line is written when an incoming SMTP
 connection is unexpectedly dropped.
 .next

+.cindex "log" "millisecond timestamps"
+.cindex millisecond logging
+.cindex timstamps "millisecond, in logs"
+&%millisec%&: Timestamps have a period and three decimal places of finer granularity
+appended to the seconds value.
+.next

 .cindex "log" "outgoing interface"
 .cindex "log" "local interface"
 .cindex "log" "local address and port"
 .cindex "log" "outgoing interface"
 .cindex "log" "local interface"
 .cindex "log" "local address and port"


@@ -36296,6 +36365,8 @@ includes reception time as well as the delivery time for the current address.
 This means that it may be longer than the difference between the arrival and
 delivery log line times, because the arrival log line is not written until the
 message has been successfully received.
 This means that it may be longer than the difference between the arrival and
 delivery log line times, because the arrival log line is not written until the
 message has been successfully received.

+If millisecond logging is enabled, short times will be shown with greater
+precision, eg. &`QT=1.578s`&.

 .next
 &%queue_time_overall%&: The amount of time the message has been in the queue on
 the local host is logged as QT=<&'time'&> on &"Completed"& lines, for
 .next
 &%queue_time_overall%&: The amount of time the message has been in the queue on
 the local host is logged as QT=<&'time'&> on &"Completed"& lines, for


@@ -37998,13 +38069,11 @@ the contents of files on the spool via the Exim monitor (which runs
 unprivileged), Exim must be built to allow group read access to its spool
 files.
 
 unprivileged), Exim must be built to allow group read access to its spool
 files.
 

-.new

 By default, regular users are trusted to perform basic testing and
 introspection commands, as themselves.  This setting can be tightened by
 setting the &%commandline_checks_require_admin%& option.
 This affects most of the checking options,
 such as &%-be%& and anything else &%-b*%&.
 By default, regular users are trusted to perform basic testing and
 introspection commands, as themselves.  This setting can be tightened by
 setting the &%commandline_checks_require_admin%& option.
 This affects most of the checking options,
 such as &%-be%& and anything else &%-b*%&.

-.wen

 
 
 .section "Spool files" "SECID275"
 
 
 .section "Spool files" "SECID275"


@@ -38125,12 +38194,10 @@ file remains in existence. When Exim next processes the message, it notices the
 -J file and uses it to update the -H file before starting the next delivery
 attempt.
 
 -J file and uses it to update the -H file before starting the next delivery
 attempt.
 

-.new

 Files whose names end with -K or .eml may also be seen in the spool.
 These are temporaries used for DKIM or malware processing, when that is used.
 They should be tidied up by normal operations; any old ones are probably
 relics of crashes and can be removed.
 Files whose names end with -K or .eml may also be seen in the spool.
 These are temporaries used for DKIM or malware processing, when that is used.
 They should be tidied up by normal operations; any old ones are probably
 relics of crashes and can be removed.

-.wen

 
 .section "Format of the -H file" "SECID282"
 .cindex "uid (user id)" "in spool file"
 
 .section "Format of the -H file" "SECID282"
 .cindex "uid (user id)" "in spool file"


@@ -38292,13 +38359,11 @@ to ensure that the caller is displayed in queue listings).
 If a message was scanned by SpamAssassin, this is present. It records the value
 of &$spam_score_int$&.
 
 If a message was scanned by SpamAssassin, this is present. It records the value
 of &$spam_score_int$&.
 

-.new

 .vitem &%-spool_file_wireformat%&
 The -D file for this message is in wire-format (for ESMTP CHUNKING)
 rather than Unix-format.
 The line-ending is CRLF rather than newline.
 There is still, however, no leading-dot-stuffing.
 .vitem &%-spool_file_wireformat%&
 The -D file for this message is in wire-format (for ESMTP CHUNKING)
 rather than Unix-format.
 The line-ending is CRLF rather than newline.
 There is still, however, no leading-dot-stuffing.

-.wen

 
 .vitem &%-tls_certificate_verified%&
 A TLS certificate was received from the client that sent this message, and the
 
 .vitem &%-tls_certificate_verified%&
 A TLS certificate was received from the client that sent this message, and the


@@ -38407,7 +38472,6 @@ unqualified domain &'foundation'&.
 .ecindex IIDforspo2
 .ecindex IIDforspo3
 
 .ecindex IIDforspo2
 .ecindex IIDforspo3
 

-.new

 .section "Format of the -D file" "SECID282a"
 The data file is traditionally in Unix-standard format: lines are ended with
 an ASCII newline character.
 .section "Format of the -D file" "SECID282a"
 The data file is traditionally in Unix-standard format: lines are ended with
 an ASCII newline character.


@@ -38419,7 +38483,6 @@ suitable for direct copying to the wire when transmitting using the
 ESMTP CHUNKING option, meaning lower processing overhead.
 Lines are terminated with an ASCII CRLF pair.
 There is no dot-stuffing (and no dot-termination).
 ESMTP CHUNKING option, meaning lower processing overhead.
 Lines are terminated with an ASCII CRLF pair.
 There is no dot-stuffing (and no dot-termination).

-.wen

 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////


@@ -38477,20 +38540,18 @@ These options take (expandable) strings as arguments.
 
 .option dkim_domain smtp string list&!! unset
 The domain(s) you want to sign with.
 
 .option dkim_domain smtp string list&!! unset
 The domain(s) you want to sign with.

-.new

 After expansion, this can be a list.
 Each element in turn is put into the &%$dkim_domain%& expansion variable
 while expanding the remaining signing options.
 After expansion, this can be a list.
 Each element in turn is put into the &%$dkim_domain%& expansion variable
 while expanding the remaining signing options.

-.wen

 If it is empty after expansion, DKIM signing is not done.
 
 If it is empty after expansion, DKIM signing is not done.
 

-.option dkim_selector smtp string&!! unset
+.option dkim_selector smtp string list&!! unset

 This sets the key selector string.
 This sets the key selector string.

-You can use the &%$dkim_domain%& expansion variable to look up a matching selector.
-The result is put in the expansion
+After expansion, which can use &$dkim_domain$&, this can be a list.
+Each element in turn is put in the expansion

 variable &%$dkim_selector%& which may be used in the &%dkim_private_key%&
 option along with &%$dkim_domain%&.
 variable &%$dkim_selector%& which may be used in the &%dkim_private_key%&
 option along with &%$dkim_domain%&.

-If the option is empty after expansion, DKIM signing is not done.
+If the option is empty after expansion, DKIM signing is not done for this domain.

 
 .option dkim_private_key smtp string&!! unset
 This sets the private key to use.
 
 .option dkim_private_key smtp string&!! unset
 This sets the private key to use.


@@ -38509,6 +38570,17 @@ is set.
 .endlist
 If the option is empty after expansion, DKIM signing is not done.
 
 .endlist
 If the option is empty after expansion, DKIM signing is not done.
 

+.option dkim_hash smtp string&!! sha256
+Can be set alternatively to &"sha1"& to use an alternate hash
+method.  Note that sha1 is now condidered insecure, and deprecated.
+
+.option dkim_identity smtp string&!! unset
+If set after expansion, the value is used to set an "i=" tag in
+the signing header.  The DKIM standards restrict the permissible
+syntax of this optional tag to a mail address, with possibly-empty
+local part, an @, and a domain identical to or subdomain of the "d="
+tag value.  Note that Exim does not check the value.
+

 .option dkim_canon smtp string&!! unset
 This option sets the canonicalization method used when signing a message.
 The DKIM RFC currently supports two methods: "simple" and "relaxed".
 .option dkim_canon smtp string&!! unset
 This option sets the canonicalization method used when signing a message.
 The DKIM RFC currently supports two methods: "simple" and "relaxed".


@@ -38522,11 +38594,26 @@ either "1" or "true", Exim will defer. Otherwise Exim will send the message
 unsigned. You can use the &%$dkim_domain%& and &%$dkim_selector%& expansion
 variables here.
 
 unsigned. You can use the &%$dkim_domain%& and &%$dkim_selector%& expansion
 variables here.
 

-.option dkim_sign_headers smtp string&!! unset
-If set, this option must expand to (or be specified as) a colon-separated
-list of header names. Headers with these names will be included in the message
-signature.
-When unspecified, the header names recommended in RFC4871 will be used.
+.option dkim_sign_headers smtp string&!! "see below"
+If set, this option must expand to a colon-separated
+list of header names.
+Headers with these names, or the absence or such a header, will be included
+in the message signature.
+When unspecified, the header names listed in RFC4871 will be used,
+whether or not each header is present in the message.
+The default list is available for the expansion in the macro
+"_DKIM_SIGN_HEADERS".
+
+If a name is repeated, multiple headers by that name (or the absence therof)
+will be signed.  The textually later headers in the headers part of the
+message are signed first, if there are multiples.
+
+A name can be prefixed with either an '=' or a '+' character.
+If an '=' prefix is used, all headers that are present with this name
+will be signed.
+If a '+' prefix if used, all headers that are present with this name
+will be signed, and one signtature added for a missing header with the
+name will be appended.

 
 
 .section "Verifying DKIM signatures in incoming mail" "SECID514"
 
 
 .section "Verifying DKIM signatures in incoming mail" "SECID514"


@@ -38537,7 +38624,7 @@ Verification of DKIM signatures in SMTP incoming email is implemented via the
 syntactically(!) correct signature in the incoming message.
 A missing ACL definition defaults to accept.
 If any ACL call does not accept, the message is not accepted.
 syntactically(!) correct signature in the incoming message.
 A missing ACL definition defaults to accept.
 If any ACL call does not accept, the message is not accepted.

-If a cutthrough delivery was in progress for the message it is
+If a cutthrough delivery was in progress for the message, that is

 summarily dropped (having wasted the transmission effort).
 
 To evaluate the signature in the ACL a large number of expansion variables
 summarily dropped (having wasted the transmission effort).
 
 To evaluate the signature in the ACL a large number of expansion variables


@@ -38575,6 +38662,9 @@ dkim_verify_signers = $sender_address_domain:$dkim_signers
 If a domain or identity is listed several times in the (expanded) value of
 &%dkim_verify_signers%&, the ACL is only called once for that domain or identity.
 
 If a domain or identity is listed several times in the (expanded) value of
 &%dkim_verify_signers%&, the ACL is only called once for that domain or identity.
 

+If multiple signatures match a domain (or identity), the ACL is called once
+for each matching signature.
+

 
 Inside the &%acl_smtp_dkim%&, the following expansion variables are
 available (from most to least important):
 
 Inside the &%acl_smtp_dkim%&, the following expansion variables are
 available (from most to least important):


@@ -38587,7 +38677,8 @@ an identity. This is one of the list items from the expanded main option
 &%dkim_verify_signers%& (see above).
 
 .vitem &%$dkim_verify_status%&
 &%dkim_verify_signers%& (see above).
 
 .vitem &%$dkim_verify_status%&

-A string describing the general status of the signature. One of
+Within the DKIM ACL,
+a string describing the general status of the signature. One of

 .ilist
 &%none%&: There is no signature in the message for the current domain or
 identity (as reflected by &%$dkim_cur_signer%&).
 .ilist
 &%none%&: There is no signature in the message for the current domain or
 identity (as reflected by &%$dkim_cur_signer%&).


@@ -38601,6 +38692,20 @@ available in &%$dkim_verify_reason%&.
 &%pass%&: The signature passed verification. It is valid.
 .endlist
 
 &%pass%&: The signature passed verification. It is valid.
 .endlist
 

+This variable can be overwritten using an ACL 'set' modifier.
+This might, for instance, be done to enforce a policy restriction on
+hash-method or key-size:
+.code
+  warn condition =     ${if eq {$dkim_algo}{rsa-sha1}}
+       condition =     ${if eq {$dkim_verify_status}{pass}}
+       logwrite =      NOTE: forcing dkim verify fail (was pass)
+       set dkim_verify_status = fail
+       set dkim_verify_reason = hash too weak
+.endd
+
+After all the DKIM ACL runs have completed, the value becomes a
+colon-separated list of the values after each run.
+

 .vitem &%$dkim_verify_reason%&
 A string giving a little bit more detail when &%$dkim_verify_status%& is either
 "fail" or "invalid". One of
 .vitem &%$dkim_verify_reason%&
 A string giving a little bit more detail when &%$dkim_verify_status%& is either
 "fail" or "invalid". One of


@@ -38621,6 +38726,8 @@ re-written or otherwise changed in a way which is incompatible with
 DKIM verification. It may of course also mean that the signature is forged.
 .endlist
 
 DKIM verification. It may of course also mean that the signature is forged.
 .endlist
 

+This variable can be overwritten using an ACL 'set' modifier.
+

 .vitem &%$dkim_domain%&
 The signing domain. IMPORTANT: This variable is only populated if there is
 an actual signature in the message for the current domain or identity (as
 .vitem &%$dkim_domain%&
 The signing domain. IMPORTANT: This variable is only populated if there is
 an actual signature in the message for the current domain or identity (as


@@ -38640,7 +38747,7 @@ The algorithm used. One of 'rsa-sha1' or 'rsa-sha256'.
 .vitem &%$dkim_canon_body%&
 The body canonicalization method. One of 'relaxed' or 'simple'.
 
 .vitem &%$dkim_canon_body%&
 The body canonicalization method. One of 'relaxed' or 'simple'.
 

-.vitem &%dkim_canon_headers%&
+.vitem &%$dkim_canon_headers%&

 The header canonicalization method. One of 'relaxed' or 'simple'.
 
 .vitem &%$dkim_copiedheaders%&
 The header canonicalization method. One of 'relaxed' or 'simple'.
 
 .vitem &%$dkim_copiedheaders%&


@@ -39066,10 +39173,8 @@ The second column in the table above describes whether the event fires
 before or after the action is associates with.  Those which fire before
 can be used to affect that action (more on this below).
 
 before or after the action is associates with.  Those which fire before
 can be used to affect that action (more on this below).
 

-.new

 The third column in the table above says what section of the configumration
 should define the event action.
 The third column in the table above says what section of the configumration
 should define the event action.

-.wen

 
 An additional variable, &$event_data$&, is filled with information varying
 with the event type:
 
 An additional variable, &$event_data$&, is filled with information varying
 with the event type: