input and output (that is, not using TCP/IP). A number of MUAs operate in this
manner.
.code
-deny message = Restricted characters in address
- domains = +local_domains
+deny domains = +local_domains
local_parts = ^[.] : ^.*[@%!/|]
+ message = Restricted characters in address
-deny message = Restricted characters in address
- domains = !+local_domains
+deny domains = !+local_domains
local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
+ message = Restricted characters in address
.endd
These statements are concerned with local parts that contain any of the
characters &"@"&, &"%"&, &"!"&, &"/"&, &"|"&, or dots in unusual places.
This statement requires the recipient address to be verified; if verification
fails, the address is rejected.
.code
-# deny message = rejected because $sender_host_address \
+# deny dnslists = black.list.example
+# message = rejected because $sender_host_address \
# is in a black list at $dnslist_domain\n\
# $dnslist_text
-# dnslists = black.list.example
#
# warn dnslists = black.list.example
# add_header = X-Warning: $sender_host_address is in \
.endd
When the lookup succeeds, the result of the expansion is a list of domains (and
possibly other types of item that are allowed in domain lists).
+.cindex "tainted data" "de-tainting"
+The result of the expansion is not tainted.
In the second example, the lookup is a single item in a domain list. It causes
Exim to use a lookup to see if the domain that is being processed can be found
first &%domains%& setting above generates the second setting, which therefore
causes a second lookup to occur.
+.new
+The lookup type may optionally be followed by a comma
+and a comma-separated list of options.
+Each option is a &"name=value"& pair.
+Whether an option is meaningful depands on the lookup type.
+.wen
+
The rest of this chapter describes the different lookup types that are
available. Any of them can be used in any part of the configuration where a
lookup is permitted.
.new
.cindex "tainted data" "single-key lookups"
The file string may not be tainted
+
+.cindex "tainted data" "de-tainting"
+All single-key lookups support the option &"ret=key"&.
+If this is given and the lookup
+(either underlying implementation or cached value)
+returns data, the result is replaced with a non-tainted
+version of the lookup key.
.wen
.next
.cindex "query-style lookup" "definition of"
it is possible to specify a list of servers with an individual query. This is
done by appending a comma-separated option to the query type:
.display
-.endd
&`,servers=`&&'server1:server2:server3:...'&
+.endd
.wen
Each item in the list may take one of two forms:
.olist
You can use &`fail`& instead of {<&'string3'&>} as in a string extract.
+.new
+.vitem &*${listquote{*&<&'separator'&>&*}{*&<&'string'&>&*}}*&
+.cindex quoting "for list"
+.cindex list quoting
+This item doubles any occurrence of the separator character
+in the given string.
+An empty string is replaced with a single space.
+This converts the string into a safe form for use as a list element,
+in a list using the given separator.
+.wen
+
+
.vitem "&*${lookup{*&<&'key'&>&*}&~*&<&'search&~type'&>&*&~&&&
{*&<&'file'&>&*}&~{*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&"
This is the first of one of two different types of lookup item, which are both
As a more realistic example, in an ACL you might have
.code
-deny message = Too many bad recipients
- condition = \
+deny condition = \
${if and { \
{>{$rcpt_count}{10}} \
{ \
{${eval:$rcpt_count/2}} \
} \
}{yes}{no}}
+ message = Too many bad recipients
.endd
The condition is true if there have been more than 10 RCPT commands and
fewer than half of them have resulted in a valid recipient.
There can be problems if any of the strings are permitted to contain colon
characters. In the usual way, these have to be doubled to avoid being taken as
-separators. If the data is being inserted from a variable, the &%sg%& expansion
-item can be used to double any existing colons. For example, the configuration
+separators.
+The &%listquote%& expansion item can be used for this.
+For example, the configuration
of a LOGIN authenticator might contain this setting:
.code
-server_condition = ${if pam{$auth1:${sg{$auth2}{:}{::}}}}
-.endd
-For a PLAIN authenticator you could use:
-.code
-server_condition = ${if pam{$auth2:${sg{$auth3}{:}{::}}}}
+server_condition = ${if pam{$auth1:${listquote{:}{$auth2}}}}
.endd
In some operating systems, PAM authentication can be done only from a process
running as root. Since Exim is running as the Exim user when receiving
.vindex "&$config_file$&"
The name of the main configuration file Exim is using.
-.vitem &$dmarc_domain_policy$& &&&
- &$dmarc_status$& &&&
- &$dmarc_status_text$& &&&
- &$dmarc_used_domains$&
-Results of DMARC verification.
-For details see section &<<SECDMARC>>&.
-
.vitem &$dkim_verify_status$&
Results of DKIM verification.
For details see section &<<SECDKIMVFY>>&.
a colon-separated list of signer domains and identities for the message.
For details see section &<<SECDKIMVFY>>&.
+.vitem &$dmarc_domain_policy$& &&&
+ &$dmarc_status$& &&&
+ &$dmarc_status_text$& &&&
+ &$dmarc_used_domains$&
+Results of DMARC verification.
+For details see section &<<SECDMARC>>&.
+
.vitem &$dnslist_domain$& &&&
&$dnslist_matched$& &&&
&$dnslist_text$& &&&
allows you, for example, to do things like this:
.code
deny hosts = net-lsearch;/some/file
-message = $host_data
+ message = $host_data
.endd
.vitem &$host_lookup_deferred$&
.cindex "host name" "lookup, failure of"
Here is an example of the use of this variable in a DATA ACL:
.code
-deny message = Too many lines in message header
- condition = \
+deny condition = \
${if <{250}{${eval:$message_linecount - $body_linecount}}}
+ message = Too many lines in message header
.endd
In the MAIL and RCPT ACLs, the value is zero because at that stage the
message has not yet been received.
.row &%percent_hack_domains%& "recognize %-hack for these domains"
.row &%spamd_address%& "set interface to SpamAssassin"
.row &%strict_acl_vars%& "object to unset ACL variables"
+.row &%spf_smtp_comment_template%& "template for &$spf_smtp_comment$&"
.endtable
.row &%dkim_verify_keytypes%& "DKIM key types accepted for signatures"
.row &%dkim_verify_min_keysizes%& "DKIM key sizes accepted for signatures"
.row &%dkim_verify_signers%& "DKIM domains for which DKIM ACL is run"
+.row &%dmarc_forensic_sender%& "DMARC sender for report messages"
+.row &%dmarc_history_file%& "DMARC results log"
+.row &%dmarc_tld_file%& "DMARC toplevel domains file"
.row &%host_lookup%& "host name looked up for these hosts"
.row &%host_lookup_order%& "order of DNS and local name lookups"
.row &%recipient_unqualified_hosts%& "may send unqualified recipients"
See section &<<SECDKIMVFY>>&.
+.option dmarc_forensic_sender main string&!! unset
+.option dmarc_history_file main string unset
+.option dmarc_tld_file main string unset
+.cindex DMARC "main section options"
+These options control DMARC processing.
+See section &<<SECDMARC>>& for details.
+
+
.option dns_again_means_nonexist main "domain list&!!" unset
.cindex "DNS" "&""try again""& response; overriding"
DNS lookups give a &"try again"& response for the DNS errors
A NOTIFY=SUCCESS option requests success-DSN messages.
A NOTIFY= option with no argument requests that no delay or failure DSNs
are sent.
+.new
+&*Note*&: Supplying success-DSN messages has been criticised
+on privacy grounds; it can leak details of internal forwarding.
+.wen
.option dsn_from main "string&!!" "see below"
.cindex "&'From:'& header line" "in bounces"
This option is available when Exim is compiled with SPF support.
See section &<<SECSPF>>& for more details.
+.new
+.option spf_smtp_comment_template main string&!! "Please%_see%_http://www.open-spf.org/Why"
+This option is available when Exim is compiled with SPF support. It
+allows the customisation of the SMTP comment that the SPF library
+generates. You are strongly encouraged to link to your own explanative
+site. The template must not contain spaces. If you need spaces in the
+output, use the proper placeholder. If libspf2 can not parse the
+template, it uses a built-in default broken link. The following placeholders
+(along with Exim variables (but see below)) are allowed in the template:
+.ilist
+&*%_*&: A space.
+.next
+&*%{L}*&: Envelope sender's local part.
+.next
+&*%{S}*&: Envelope sender.
+.next
+&*%{O}*&: Envelope sender's domain.
+.next
+&*%{D}*&: Current(?) domain.
+.next
+&*%{I}*&: SMTP client Ip.
+.next
+&*%{C}*&: SMTP client pretty IP.
+.next
+&*%{T}*&: Epoch time (UTC).
+.next
+&*%{P}*&: SMTP client domain name.
+.next
+&*%{V}*&: IP version.
+.next
+&*%{H}*&: EHLO/HELO domain.
+.next
+&*%{R}*&: Receiving domain.
+.endlist
+The capitalized placeholders do proper URL encoding, if you use them
+lowercased, no encoding takes place. This list was compiled from the
+libspf2 sources.
+
+A note on using Exim variables: As
+currently the SPF library is initialized before the SMTP EHLO phase,
+the variables useful for expansion are quite limited.
+.wen
.option split_spool_directory main boolean false
If both this option and &%tls_try_verify_hosts%& are unset
operation is as if this option selected all hosts.
-.option utf8_downconvert smtp integer&!! unset
+.option utf8_downconvert smtp integer&!! -1
.cindex utf8 "address downconversion"
.cindex i18n "utf8 address downconversion"
If built with internationalization support,
-this option controls conversion of UTF-8 in message addresses
+this option controls conversion of UTF-8 in message envelope addresses
to a-label form.
-For details see section &<<SECTi18nMTA>>&.
+If, after expansion, the value is 1, 0, or -1 then this value overrides
+any value previously set for the message. Otherwise, any previously
+set value is used. To permit use of a previous value,
+set this option to an empty string.
+For details on the values see section &<<SECTi18nMTA>>&.
&%drop%&: This verb behaves like &%deny%&, except that an SMTP connection is
forcibly closed after the 5&'xx'& error message has been sent. For example:
.code
-drop message = I don't take more than 20 RCPTs
- condition = ${if > {$rcpt_count}{20}}
+drop condition = ${if > {$rcpt_count}{20}}
+ message = I don't take more than 20 RCPTs
.endd
There is no difference between &%deny%& and &%drop%& for the connect-time ACL.
The connection is always dropped after sending a 550 response.
that are being submitted at the same time using &%-bs%& or &%-bS%&.
.vitem &*control&~=&~utf8_downconvert*&
-This control enables conversion of UTF-8 in message addresses
+This control enables conversion of UTF-8 in message envelope addresses
to a-label form.
For details see section &<<SECTi18nMTA>>&.
.endlist vlist
allows you, for example, to set up a statement like this:
.code
deny hosts = net-lsearch;/some/file
-message = $host_data
+ message = $host_data
.endd
which gives a custom error message for each denied host.
condition to restrict it to bounce messages only:
.code
deny senders = :
- message = A valid sender header is required for bounces
!verify = header_sender
+ message = A valid sender header is required for bounces
.endd
.vitem &*verify&~=&~header_syntax*&
warn for one list and block for another, you can use two different statements:
.code
deny dnslists = blackholes.mail-abuse.org
-warn message = X-Warn: sending host is on dialups list
- dnslists = dialups.mail-abuse.org
+warn dnslists = dialups.mail-abuse.org
+ message = X-Warn: sending host is on dialups list
.endd
.cindex caching "of dns lookup"
.cindex DNS TTL
with these lists. You can change the name that is looked up in a DNS list by
listing it after the domain name, introduced by a slash. For example,
.code
-deny message = Sender's domain is listed at $dnslist_domain
- dnslists = dsn.rfc-ignorant.org/$sender_address_domain
+deny dnslists = dsn.rfc-ignorant.org/$sender_address_domain
+ message = Sender's domain is listed at $dnslist_domain
.endd
This particular example is useful only in ACLs that are obeyed after the
RCPT or DATA commands, when a sender address is available. If (for
However, when the data for the list is obtained from a lookup, the second form
is usually much more convenient. Consider this example:
.code
-deny message = The mail servers for the domain \
+deny dnslists = sbl.spamhaus.org/<|${lookup dnsdb {>|a=<|\
+ ${lookup dnsdb {>|mxh=\
+ $sender_address_domain} }} }
+ message = The mail servers for the domain \
$sender_address_domain \
are listed at $dnslist_domain ($dnslist_value); \
see $dnslist_text.
- dnslists = sbl.spamhaus.org/<|${lookup dnsdb {>|a=<|\
- ${lookup dnsdb {>|mxh=\
- $sender_address_domain} }} }
.endd
Note the use of &`>|`& in the dnsdb lookup to specify the separator for
multiple DNS records. The inner dnsdb lookup produces a list of MX hosts
information.
You can use the DNS list variables in &%message%& or &%log_message%& modifiers
-&-- although these appear before the condition in the ACL, they are not
+&-- even if these appear before the condition in the ACL, they are not
expanded until after it has failed. For example:
.code
deny hosts = !+local_networks
a check that the IP being tested is indeed on the first list. The first
domain is the one that is put in &$dnslist_domain$&. For example:
.code
-deny message = \
- rejected because $sender_host_address is blacklisted \
- at $dnslist_domain\n$dnslist_text
- dnslists = \
+deny dnslists = \
sbl.spamhaus.org,sbl-xbl.spamhaus.org=127.0.0.2 : \
dul.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.10
+ message = \
+ rejected because $sender_host_address is blacklisted \
+ at $dnslist_domain\n$dnslist_text
.endd
For the first blacklist item, this starts by doing a lookup in
&'sbl-xbl.spamhaus.org'& and testing for a 127.0.0.2 return. If there is a
.code
acl_check_connect:
deny ratelimit = 100 / 5m / readonly
- log_message = RATE CHECK: $sender_rate/$sender_rate_period \
+ log_message = RATE CHECK: $sender_rate/$sender_rate_period \
(max $sender_rate_limit)
# ...
acl_check_mail:
warn ratelimit = 100 / 5m / strict
- log_message = RATE UPDATE: $sender_rate/$sender_rate_period \
+ log_message = RATE UPDATE: $sender_rate/$sender_rate_period \
(max $sender_rate_limit)
.endd
ratelimit = 100 / 1d / strict / $authenticated_id
# System-wide rate limit
-defer message = Sorry, too busy. Try again later.
- ratelimit = 10 / 1s / $primary_hostname
+defer ratelimit = 10 / 1s / $primary_hostname
+ message = Sorry, too busy. Try again later.
# Restrict incoming rate from each host, with a default
# set using a macro and special cases looked up in a table.
-defer message = Sender rate exceeds $sender_rate_limit \
- messages per $sender_rate_period
- ratelimit = ${lookup {$sender_host_address} \
+defer ratelimit = ${lookup {$sender_host_address} \
cdb {DB/ratelimits.cdb} \
{$value} {RATELIMIT} }
+ message = Sender rate exceeds $sender_rate_limit \
+ messages per $sender_rate_period
.endd
&*Warning*&: If you have a busy server with a lot of &%ratelimit%& tests,
especially with the &%per_rcpt%& option, you may suffer from a performance
use this:
.code
# Bounces: drop unsigned addresses for BATV senders
-deny message = This address does not send an unsigned reverse path
- senders = :
+deny senders = :
recipients = +batv_senders
+ message = This address does not send an unsigned reverse path
# Bounces: In case of prvs-signed address, check signature.
-deny message = Invalid reverse path signature.
- senders = :
+deny senders = :
condition = ${prvscheck {$local_part@$domain}\
{PRVSCHECK_SQL}{1}}
!condition = $prvscheck_result
+ message = Invalid reverse path signature.
.endd
The first statement rejects recipients for bounce messages that are addressed
to plain BATV sender addresses, because it is known that BATV senders do not
Here is a very simple scanning example:
.code
-deny message = This message contains malware ($malware_name)
- malware = *
+deny malware = *
+ message = This message contains malware ($malware_name)
.endd
The next example accepts messages when there is a problem with the scanner:
.code
-deny message = This message contains malware ($malware_name)
- malware = */defer_ok
+deny malware = */defer_ok
+ message = This message contains malware ($malware_name)
.endd
The next example shows how to use an ACL variable to scan with both sophie and
aveserver. It assumes you have set:
.endd
in the main Exim configuration.
.code
-deny message = This message contains malware ($malware_name)
- set acl_m0 = sophie
+deny set acl_m0 = sophie
malware = *
+ message = This message contains malware ($malware_name)
-deny message = This message contains malware ($malware_name)
- set acl_m0 = aveserver
+deny set acl_m0 = aveserver
malware = *
+ message = This message contains malware ($malware_name)
.endd
.section "Calling SpamAssassin from an Exim ACL" "SECID206"
Here is a simple example of the use of the &%spam%& condition in a DATA ACL:
.code
-deny message = This message was classified as SPAM
- spam = joe
+deny spam = joe
+ message = This message was classified as SPAM
.endd
The right-hand side of the &%spam%& condition specifies a name. This is
relevant if you have set up multiple SpamAssassin profiles. If you do not want
are quite small, it is recommended that you do not scan the big ones. For
example:
.code
-deny message = This message was classified as SPAM
- condition = ${if < {$message_size}{10K}}
+deny condition = ${if < {$message_size}{10K}}
spam = nobody
+ message = This message was classified as SPAM
.endd
The &%spam%& condition returns true if the threshold specified in the user's
statement block), append &`/defer_ok`& to the right-hand side of the
spam condition, like this:
.code
-deny message = This message was classified as SPAM
- spam = joe/defer_ok
+deny spam = joe/defer_ok
+ message = This message was classified as SPAM
.endd
This causes messages to be accepted even if there is a problem with &%spamd%&.
add_header = Subject: *SPAM* $h_Subject:
# reject spam at high scores (> 12)
-deny message = This message scored $spam_score spam points.
- spam = nobody:true
+deny spam = nobody:true
condition = ${if >{$spam_score_int}{120}{1}{0}}
+ message = This message scored $spam_score spam points.
.endd
alternative plain text), while allowing HTML files to be attached. HTML
coverletter mail attached to non-HTML coverletter mail will also be allowed:
.code
-deny message = HTML mail is not accepted here
-!condition = $mime_is_rfc822
-condition = $mime_is_coverletter
-condition = ${if eq{$mime_content_type}{text/html}{1}{0}}
+deny !condition = $mime_is_rfc822
+ condition = $mime_is_coverletter
+ condition = ${if eq{$mime_content_type}{text/html}{1}{0}}
+ message = HTML mail is not accepted here
.endd
.vitem &$mime_is_multipart$&
with more backslashes, or use the &`\N`& facility to disable expansion.
Here is a simple example that contains two regular expressions:
.code
-deny message = contains blacklisted regex ($regex_match_string)
- regex = [Mm]ortgage : URGENT BUSINESS PROPOSAL
+deny regex = [Mm]ortgage : URGENT BUSINESS PROPOSAL
+ message = contains blacklisted regex ($regex_match_string)
.endd
The conditions returns true if any one of the regular expressions matches. The
&$regex_match_string$& expansion variable is then set up and contains the
.code
# Warn when Mail purportedly from GMail has no gmail signature
-warn log_message = GMail sender without gmail.com DKIM signature
- sender_domains = gmail.com
+warn sender_domains = gmail.com
dkim_signers = gmail.com
dkim_status = none
+ log_message = GMail sender without gmail.com DKIM signature
.endd
Note that the above does not check for a total lack of DKIM signing;
to restrict an ACL verb to a list of verification outcomes, for example:
.code
-deny message = Mail from Paypal with invalid/missing signature
- sender_domains = paypal.com:paypal.de
+deny sender_domains = paypal.com:paypal.de
dkim_signers = paypal.com:paypal.de
dkim_status = none:invalid:fail
+ message = Mail from Paypal with invalid/missing signature
.endd
The possible status keywords are: 'none','invalid','fail' and 'pass'. Please
message = $sender_host_address is not allowed to send mail from \
${if def:sender_address_domain \
{$sender_address_domain}{$sender_helo_name}}. \
- Please see http://www.open-spf.org/Why?scope=\
- ${if def:sender_address_domain {mfrom}{helo}};\
+ Please see http://www.open-spf.org/Why;\
identity=${if def:sender_address_domain \
{$sender_address}{$sender_helo_name}};\
ip=$sender_host_address
.endd
+Note: The above mentioned URL may not be as helpful as expected. You are
+encouraged to replace the link with a link to a site with more
+explanations.
+
When the spf condition has run, it sets up several expansion
variables:
.vitem &$spf_smtp_comment$&
.vindex &$spf_smtp_comment$&
+.vindex &%spf_smtp_comment_template%&
This contains a string that can be used in a SMTP response
to the calling party. Useful for "fail".
+.new
+ The string is generated by the SPF library from the template configured in the main config
+ option &%spf_smtp_comment_template%&.
+.wen
.endlist
# Or do some kind of IP lookup in a flat file or database
# LIMIT = ${lookup{$sender_host_address}iplsearch{/etc/exim/proxy_limits}}
- defer message = Too many connections from this IP right now
- ratelimit = LIMIT / 5s / per_conn / strict
+ defer ratelimit = LIMIT / 5s / per_conn / strict
+ message = Too many connections from this IP right now
.endd
control = utf8_downconvert
control = utf8_downconvert/<value>
.endd
-This sets a flag requiring that addresses are converted to
-a-label form before smtp delivery, for use in a
-Message Submission Agent context.
+This sets a flag requiring that envelope addresses are converted to
+a-label form before smtp delivery.
+This is usually for use in a Message Submission Agent context,
+but could be used for any message.
+
If a value is appended it may be:
.display
-&`1 `& (default) mandatory downconversion
+&`1 `& mandatory downconversion
&`0 `& no downconversion
&`-1 `& if SMTPUTF8 not supported by destination host
.endd
+If no value is given, 1 is used.
If mua_wrapper is set, the utf8_downconvert control
is initially set to -1.
The smtp transport has an option &%utf8_downconvert%&.
If set it must expand to one of the three values described above,
-and it overrides any previously set value.
+or an empty string.
+If non-empty it overrides value previously set
+(due to mua_wrapper or by an ACL control).
There is no explicit support for VRFY and EXPN.
git://git.exim.org / users / heiko / exim.git / blobdiff