Testsuite: do not use trailing spaces in runtest

[users/heiko/exim.git] / test / runtest

diff --git a/test/runtest b/test/runtest
index bd0b9859b34edeef194b010d7387d7d49cde12a1..a672d232738fa0e356bb247245a763b113cc9c35 100755 (executable)
--- a/test/runtest
+++ b/test/runtest
@@ -772,7 +772,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     }
 
   # Port in host address in spool file output from -Mvh
     }
 
   # Port in host address in spool file output from -Mvh

-  s/^-host_address (.*)\.\d+/-host_address $1.9999/;
+  s/^(--?host_address) (.*)\.\d+/$1 $2.9999/;

 
   if ($dynamic_socket and $dynamic_socket->opened and my $port = $dynamic_socket->sockport) {
     s/^Connecting to 127\.0\.0\.1 port \K$port/<dynamic port>/;
 
   if ($dynamic_socket and $dynamic_socket->opened and my $port = $dynamic_socket->sockport) {
     s/^Connecting to 127\.0\.0\.1 port \K$port/<dynamic port>/;


@@ -1093,6 +1093,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /get\[host\|ipnode\]byname\[2\]\(af=inet6\)/;
     next if /DNS lookup of \S+ \(AAAA\) using fakens/;
     next if / in dns_ipv4_lookup?/;
     next if /get\[host\|ipnode\]byname\[2\]\(af=inet6\)/;
     next if /DNS lookup of \S+ \(AAAA\) using fakens/;
     next if / in dns_ipv4_lookup?/;

+    next if / writing neg-cache entry for .*AAAA/;

 
     if (/DNS lookup of \S+ \(AAAA\) gave NO_DATA/)
       {
 
     if (/DNS lookup of \S+ \(AAAA\) gave NO_DATA/)
       {


@@ -1154,16 +1155,28 @@ RESET_AFTER_EXTRA_LINE_READ:
     # remote port numbers vary
     s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
 
     # remote port numbers vary
     s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
 

+    # Platform-dependent error strings
+    s/Operation timed out/Connection timed out/;
+
+    # Platform-dependent resolver option bits
+    s/^ (?:writing|update) neg-cache entry for [^,]+-\K[0-9a-f]+, ttl/xxxx, ttl/;
+
+    # timing variance, run-to-run
+    s/^time on queue = \K1s/0s/;
+

     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 
     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 

-    # DISABLE_OCSP 
+    # DISABLE_OCSP

     next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
 
     # SUPPORT_PROXY
     next if /host in hosts_proxy\?/;
 
     next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
 
     # SUPPORT_PROXY
     next if /host in hosts_proxy\?/;
 

+    # PIPE_CONNECT
+    next if / in (pipelining_connect_advertise_hosts|hosts_pipe_connect)?\? no /;
+

     # Experimental_International
     next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
 
     # Experimental_International
     next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
 


@@ -1173,9 +1186,6 @@ RESET_AFTER_EXTRA_LINE_READ:
     # TCP Fast Open
     next if /^(ppppp )?setsockopt FASTOPEN: Network Error/;
 
     # TCP Fast Open
     next if /^(ppppp )?setsockopt FASTOPEN: Network Error/;
 

-    # Experimental_PIPE_CONNECT
-    next if / in (pipelining_connect_advertise_hosts|hosts_pipe_connect)?\? no /;
-

     # Environment cleaning
     next if /\w+ in keep_environment\? (yes|no)/;
 
     # Environment cleaning
     next if /\w+ in keep_environment\? (yes|no)/;
 


@@ -1200,6 +1210,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     # Not all platforms build with DKIM enabled
     next if /^PDKIM >> Body data for hash, canonicalized/;
 
     # Not all platforms build with DKIM enabled
     next if /^PDKIM >> Body data for hash, canonicalized/;
 

+    # Not all platforms build with SPF enabled
+    next if /^(spf_conn_init|SPF_dns_exim_new|spf_compile\.c)/;
+

     # Not all platforms have sendfile support
     next if /^cannot use sendfile for body: no support$/;
 
     # Not all platforms have sendfile support
     next if /^cannot use sendfile for body: no support$/;
 


@@ -1212,26 +1225,32 @@ RESET_AFTER_EXTRA_LINE_READ:
       {
       $_ .= <IN>;
       s/ \.\.\. >>> / ... /;
       {
       $_ .= <IN>;
       s/ \.\.\. >>> / ... /;

+      if (s/ non-TFO mode connection attempt to 224.0.0.0, 0 data\b$//) { $_ .= <IN>; }

       s/Address family not supported by protocol family/Network Error/;
       s/Network is unreachable/Network Error/;
       }
     next if /^(ppppp )?setsockopt FASTOPEN: Protocol not available$/;
     s/^(Connecting to .* \.\.\. sending) \d+ (nonTFO early-data)$/$1 dd $2/;
 
       s/Address family not supported by protocol family/Network Error/;
       s/Network is unreachable/Network Error/;
       }
     next if /^(ppppp )?setsockopt FASTOPEN: Protocol not available$/;
     s/^(Connecting to .* \.\.\. sending) \d+ (nonTFO early-data)$/$1 dd $2/;
 

-    if (/^([0-9: ]*Connecting to [^ ]+ [^ ]+( from [^ ]+)?) \.\.\. .*TFO mode sendto, no data: EINPROGRESS$/)
+    if (/^([0-9: ]*                                            # possible timestamp
+       Connecting\ to\ [^ ]+\ [^ ]+(\ from\ [^ ]+)?)\ \.\.\.
+       \ .*TFO\ mode\x20
+       (sendto,\ no\ data:\ EINPROGRESS                        # Linux
+       |connection\ attempt\ to\ [^,]+,\ 0\ data)              # MacOS & no-support
+       $/x)

       {
       $_ = $1 . " ... " . <IN>;
       {
       $_ = $1 . " ... " . <IN>;

-      s/^(.* \.\.\.) [0-9: ]*connected$/$1 connected/;
+      s/^(.* \.\.\.) [0-9: ]*connected$/$1  connected/;

 
 

-      if (/^Connecting to .* \.\.\. connected$/)
+      if (/^Connecting to .* \.\.\.  connected$/)

        {
        $_ .= <IN>;
        {
        $_ .= <IN>;

-       if (/^(Connecting to .* \.\.\. )connected\n\s+SMTP(\(close\)>>|\(Connection refused\)<<)$/)
+       if (/^(Connecting to .* \.\.\.  )connected\n\s+SMTP(\(close\)>>|\(Connection refused\)<<)$/)

          {
          $_ = $1 . "failed: Connection refused\n" . <IN>;
          s/^(Connecting .*)\n\s+SMTP\(close\)>>$/$1/;
          }
          {
          $_ = $1 . "failed: Connection refused\n" . <IN>;
          s/^(Connecting .*)\n\s+SMTP\(close\)>>$/$1/;
          }

-       elsif (/^(Connecting to .* \.\.\. connected\n)read response data: size=/)
+       elsif (/^(Connecting to .* \.\.\.  connected\n)read response data: size=/)

          { $_ = $1; }
 
        # Date/time in SMTP banner
          { $_ = $1; }
 
        # Date/time in SMTP banner


@@ -1255,6 +1274,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     # TLS resumption is not always supported by the build
     next if /in tls_resumption_hosts\?/;
 
     # TLS resumption is not always supported by the build
     next if /in tls_resumption_hosts\?/;
 

+    # Platform differences in errno strings
+    s/  SMTP\(Operation timed out\)<</  SMTP(Connection timed out)<</;
+

     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
     # of the files that are obtained using readdir() varies from system to
     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
     # of the files that are obtained using readdir() varies from system to


@@ -1330,6 +1352,8 @@ RESET_AFTER_EXTRA_LINE_READ:
       else
        { $_ = $prev; }
       }
       else
        { $_ = $prev; }
       }

+    # translate gnutls error into the openssl one
+    s/ARC: AMS signing: privkey PEM-block import: \KThe requested data were not available.$/error:0906D06C:PEM routines:PEM_read_bio:no start line/;

 
     # DKIM timestamps
     if ( /(DKIM: d=.*) t=([0-9]*) x=([0-9]*) / )
 
     # DKIM timestamps
     if ( /(DKIM: d=.*) t=([0-9]*) x=([0-9]*) / )


@@ -4211,10 +4235,22 @@ foreach $test (@test_list)
           print "==================>\n";
           system("tail -20 test-stdout");
           print "===================\n";
           print "==================>\n";
           system("tail -20 test-stdout");
           print "===================\n";

+

           print "stderr tail:\n";
           print "==================>\n";
           print "stderr tail:\n";
           print "==================>\n";

-          system("tail -20 test-stderr");
+          system("tail -30 test-stderr");
+          print "===================\n";
+
+          print "stdout-server tail:\n";
+          print "==================>\n";
+          system("tail -20 test-stdout-server");

           print "===================\n";
           print "===================\n";

+
+          print "stderr-server tail:\n";
+          print "==================>\n";
+          system("tail -30 test-stderr-server");
+          print "===================\n";
+

           print "... continue forced\n";
           }
 
           print "... continue forced\n";
           }