Dnssec observability: add variable $lookup_dnssec_authenticated

[users/heiko/exim.git] / doc / doc-txt / experimental-spec.txt

diff --git a/doc/doc-txt/experimental-spec.txt b/doc/doc-txt/experimental-spec.txt
index 2395267e813f15f7729dc5885ea1538609b2e3a8..f21609662d22cf6849727793c507e7141f394929 100644 (file)
--- a/doc/doc-txt/experimental-spec.txt
+++ b/doc/doc-txt/experimental-spec.txt
@@ -460,9 +460,13 @@ which the spf condition should succeed. Valid strings are:
               processing, including Exim's SPF processing.
               You may defer messages when this occurs.
               (Changed in 4.83)
               processing, including Exim's SPF processing.
               You may defer messages when this occurs.
               (Changed in 4.83)

+  o err_temp  Same as permerror, deprecated in 4.83, will be
+              removed in a future release.
+  o err_perm  Same as temperror, deprecated in 4.83, will be
+              removed in a future release.

 
 You can prefix each string with an exclamation mark to  invert
 
 You can prefix each string with an exclamation mark to  invert

-is meaning,  for example  "!fail" will  match all  results but
+its meaning,  for example  "!fail" will  match all  results but

 "fail".  The  string  list is  evaluated  left-to-right,  in a
 short-circuit fashion.  When a  string matches  the outcome of
 the SPF check, the condition  succeeds. If none of the  listed
 "fail".  The  string  list is  evaluated  left-to-right,  in a
 short-circuit fashion.  When a  string matches  the outcome of
 the SPF check, the condition  succeeds. If none of the  listed


@@ -775,7 +779,7 @@ fails.
 
 Of course, you can also use any other lookup method that Exim
 supports, including LDAP, Postgres, MySQL, etc, as long as the
 
 Of course, you can also use any other lookup method that Exim
 supports, including LDAP, Postgres, MySQL, etc, as long as the

-result is a list of colon-separated strings;
+result is a list of colon-separated strings.

 
 Several expansion variables are set before the DATA ACL is
 processed, and you can use them in this ACL.  The following
 
 Several expansion variables are set before the DATA ACL is
 processed, and you can use them in this ACL.  The following


@@ -783,7 +787,10 @@ expansion variables are available:
 
   o $dmarc_status
     This is a one word status indicating what the DMARC library
 
   o $dmarc_status
     This is a one word status indicating what the DMARC library

-    thinks of the email.
+    thinks of the email.  It is a combination of the results of
+    DMARC record lookup and the SPF/DKIM/DMARC processing results
+    (if a DMARC record was found).  The actual policy declared
+    in the DMARC record is in a separate expansion variable.

 
   o $dmarc_status_text
     This is a slightly longer, human readable status.
 
   o $dmarc_status_text
     This is a slightly longer, human readable status.


@@ -792,6 +799,11 @@ expansion variables are available:
     This is the domain which DMARC used to look up the DMARC
     policy record.
 
     This is the domain which DMARC used to look up the DMARC
     policy record.
 

+  o $dmarc_domain_policy
+    This is the policy declared in the DMARC record.  Valid values
+    are "none", "reject" and "quarantine".  It is blank when there
+    is any error, including no DMARC record.
+

   o $dmarc_ar_header
     This is the entire Authentication-Results header which you can
     add using an add_header modifier.
   o $dmarc_ar_header
     This is the entire Authentication-Results header which you can
     add using an add_header modifier.


@@ -827,6 +839,9 @@ b. Configure, somewhere before the DATA ACL, the control option to
   warn    !domains       = +screwed_up_dmarc_records
           control        = dmarc_enable_forensic
 
   warn    !domains       = +screwed_up_dmarc_records
           control        = dmarc_enable_forensic
 

+  warn    condition      = (lookup if destined to mailing list)
+          set acl_m_mailing_list = 1
+

 (DATA ACL)
   warn    dmarc_status   = accept : none : off
           !authenticated = *
 (DATA ACL)
   warn    dmarc_status   = accept : none : off
           !authenticated = *


@@ -842,6 +857,10 @@ b. Configure, somewhere before the DATA ACL, the control option to
           set $acl_m_quarantine = 1
           # Do something in a transport with this flag variable
 
           set $acl_m_quarantine = 1
           # Do something in a transport with this flag variable
 

+  deny    condition      = ${if eq{$dmarc_domain_policy}{reject}}
+          condition      = ${if eq{$acl_m_mailing_list}{1}}
+          message        = Messages from $dmarc_used_domain break mailing lists
+

   deny    dmarc_status   = reject
           !authenticated = *
           message        = Message from $domain_used_domain failed sender's DMARC policy, REJECT
   deny    dmarc_status   = reject
           !authenticated = *
           message        = Message from $domain_used_domain failed sender's DMARC policy, REJECT


@@ -1068,10 +1087,16 @@ Proxy Protocol server at 192.168.1.2 will look like this:
 
 3. In the ACL's the following expansion variables are available.
 
 
 3. In the ACL's the following expansion variables are available.
 

-proxy_host_address  The src IP of the proxy server making the connection
-proxy_host_port     The src port the proxy server is using
-proxy_session       Boolean, yes/no, the connected host is required to use
-                    Proxy Protocol.
+proxy_host_address   The (internal) src IP of the proxy server
+                     making the connection to the Exim server.
+proxy_host_port      The (internal) src port the proxy server is
+                     using to connect to the Exim server.
+proxy_target_address The dest (public) IP of the remote host to
+                     the proxy server.
+proxy_target_port    The dest port the remote host is using to
+                     connect to the proxy server.
+proxy_session        Boolean, yes/no, the connected host is required
+                     to use Proxy Protocol.

 
 There is no expansion for a failed proxy session, however you can detect
 it by checking if $proxy_session is true but $proxy_host is empty.  As
 
 There is no expansion for a failed proxy session, however you can detect
 it by checking if $proxy_session is true but $proxy_host is empty.  As


@@ -1091,6 +1116,13 @@ an example, in my connect ACL, I have:
                            [$sender_host_address] through proxy protocol \
                            host $proxy_host_address
 
                            [$sender_host_address] through proxy protocol \
                            host $proxy_host_address
 

+  # Possibly more clear
+  warn logwrite = Remote Source Address: $sender_host_address:$sender_host_port
+       logwrite = Proxy Target Address: $proxy_target_address:$proxy_target_port
+       logwrite = Proxy Internal Address: $proxy_host_address:$proxy_host_port
+       logwrite = Internal Server Address: $received_ip_address:$received_port
+
+

 4. Runtime issues to be aware of:
    - Since the real connections are all coming from your proxy, and the
      per host connection tracking is done before Proxy Protocol is
 4. Runtime issues to be aware of:
    - Since the real connections are all coming from your proxy, and the
      per host connection tracking is done before Proxy Protocol is