Docs typo

[users/heiko/exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index e070616c79054c19cabc06d9b14cc7cd1db9c6d9..84950b5418802c5d4c36240fdba07ce3ce3e2f38 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -3811,6 +3811,12 @@ This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option. It signifies that the
 connection to the remote host has been authenticated.
 
 by Exim in conjunction with the &%-MC%& option. It signifies that the
 connection to the remote host has been authenticated.
 

+.vitem &%-MCD%&
+.oindex "&%-MCD%&"
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-MC%& option. It signifies that the
+remote host supports the ESMTP &_DSN_& extension.
+

 .vitem &%-MCP%&
 .oindex "&%-MCP%&"
 This option is not intended for use by external callers. It is used internally
 .vitem &%-MCP%&
 .oindex "&%-MCP%&"
 This option is not intended for use by external callers. It is used internally


@@ -13425,6 +13431,7 @@ See also the &'Policy controls'& section above.
 .table2
 .row &%accept_8bitmime%&             "advertise 8BITMIME"
 .row &%auth_advertise_hosts%&        "advertise AUTH to these hosts"
 .table2
 .row &%accept_8bitmime%&             "advertise 8BITMIME"
 .row &%auth_advertise_hosts%&        "advertise AUTH to these hosts"

+.row &%dsn_advertise_hosts%&         "advertise DSN extensions to these hosts"

 .row &%ignore_fromline_hosts%&       "allow &""From ""& from these hosts"
 .row &%ignore_fromline_local%&       "allow &""From ""& from local SMTP"
 .row &%pipelining_advertise_hosts%&  "advertise pipelining to these hosts"
 .row &%ignore_fromline_hosts%&       "allow &""From ""& from these hosts"
 .row &%ignore_fromline_local%&       "allow &""From ""& from local SMTP"
 .row &%pipelining_advertise_hosts%&  "advertise pipelining to these hosts"


@@ -14166,6 +14173,18 @@ This is an obsolete option that is now a no-op. It used to affect the way Exim
 handled CR and LF characters in incoming messages. What happens now is
 described in section &<<SECTlineendings>>&.
 
 handled CR and LF characters in incoming messages. What happens now is
 described in section &<<SECTlineendings>>&.
 

+.option dsn_advertise_hosts main "host list&!!" unset
+.cindex "bounce messages" "success"
+.cindex "DSN" "success"
+.cindex "Delivery Status Notification" "success"
+DSN extensions (RFC3461) will be advertised in the EHLO message to,
+and accepted from, these hosts.
+Hosts may use the NOTIFY and ENVID options on RCPT TO commands,
+and RET and ORCPT options on MAIL FROM commands.
+A NOTIFY=SUCCESS option requests success-DSN messages.
+A NOTIFY= option with no argument requests that no delay or failure DSNs
+are sent.
+

 .option dsn_from main "string&!!" "see below"
 .cindex "&'From:'& header line" "in bounces"
 .cindex "bounce messages" "&'From:'& line, specifying"
 .option dsn_from main "string&!!" "see below"
 .cindex "&'From:'& header line" "in bounces"
 .cindex "bounce messages" "&'From:'& line, specifying"


@@ -15658,13 +15677,15 @@ the time of delivery. They are normally used only for final local deliveries.
 This option is an obsolete synonym for &%bounce_return_size_limit%&.
 
 
 This option is an obsolete synonym for &%bounce_return_size_limit%&.
 
 

-.option rfc1413_hosts main "host list&!!" *
+.option rfc1413_hosts main "host list&!!" @[]

 .cindex "RFC 1413"
 .cindex "host" "for RFC 1413 calls"
 .cindex "RFC 1413"
 .cindex "host" "for RFC 1413 calls"

-RFC 1413 identification calls are made to any client host which matches an item
-in the list.
+RFC 1413 identification calls are made to any client host which matches
+an item in the list.
+The default value specifies just this host, being any local interface
+for the system.

 
 

-.option rfc1413_query_timeout main time 5s
+.option rfc1413_query_timeout main time 0s

 .cindex "RFC 1413" "query timeout"
 .cindex "timeout" "for RFC 1413 call"
 This sets the timeout on RFC 1413 identification calls. If it is set to zero,
 .cindex "RFC 1413" "query timeout"
 .cindex "timeout" "for RFC 1413 call"
 This sets the timeout on RFC 1413 identification calls. If it is set to zero,


@@ -16992,6 +17013,15 @@ This option must always be set. It specifies which of the available routers is
 to be used.
 
 
 to be used.
 
 

+.option dsn_lasthop routers boolean false
+.cindex "DSN" "success"
+.cindex "Delivery Status Notification" "success"
+If this option is set true, and extended DSN (RFC3461) processing is in effect,
+Exim will not pass on DSN requests to downstream DSN-aware hosts but will
+instead send a success DSN as if the next hop does not support DSN.
+Not effective on redirect routers.
+
+

 
 .option errors_to routers string&!! unset
 .cindex "envelope sender"
 
 .option errors_to routers string&!! unset
 .cindex "envelope sender"


@@ -18998,6 +19028,11 @@ However, there are some private options which define transports for delivery to
 files and pipes, and for generating autoreplies. See the &%file_transport%&,
 &%pipe_transport%& and &%reply_transport%& descriptions below.
 
 files and pipes, and for generating autoreplies. See the &%file_transport%&,
 &%pipe_transport%& and &%reply_transport%& descriptions below.
 

+If success DSNs have been requested
+.cindex "DSN" "success"
+.cindex "Delivery Status Notification" "success"
+redirection triggers one and the DSN options are not passed any further.
+

 
 
 .section "Redirection data" "SECID124"
 
 
 .section "Redirection data" "SECID124"


@@ -30308,10 +30343,12 @@ It supports a &"generic"& interface to scanners called via the shell, and
 specialized interfaces for &"daemon"& type virus scanners, which are resident
 in memory and thus are much faster.
 
 specialized interfaces for &"daemon"& type virus scanners, which are resident
 in memory and thus are much faster.
 

+A timeout of 2 minutes is applied to a scanner call (by default);
+if it expires then a defer action is taken.

 
 .oindex "&%av_scanner%&"
 
 .oindex "&%av_scanner%&"

-You can set the &%av_scanner%& option in first part of the Exim configuration
-file to specify which scanner to use, together with any additional options that
+You can set the &%av_scanner%& option in the main part of the configuration
+to specify which scanner to use, together with any additional options that

 are needed. The basic syntax is as follows:
 .display
 &`av_scanner = <`&&'scanner-type'&&`>:<`&&'option1'&&`>:<`&&'option2'&&`>:[...]`&
 are needed. The basic syntax is as follows:
 .display
 &`av_scanner = <`&&'scanner-type'&&`>:<`&&'option1'&&`>:<`&&'option2'&&`>:[...]`&


@@ -30328,27 +30365,35 @@ The following scanner types are supported in this release:
 .vlist
 .vitem &%avast%&
 .cindex "virus scanners" "avast"
 .vlist
 .vitem &%avast%&
 .cindex "virus scanners" "avast"

-This is the scanner daemon of Avast version 1.1.7 and 1.1.6
-(as reported by "/bin/avast -v").
-You can get a trial version at &url(http://www.avast.com).
-This scanner type requires one option,
-either a full path to a UNIX socket,
+This is the scanner daemon of Avast. It has been tested with Avast Core
+Security (currenty at version 1.1.7).
+You can get a trial version at &url(http://www.avast.com) or for Linux
+at &url(http://www.avast.com/linux-server-antivirus).
+This scanner type takes one option,
+which can be either a full path to a UNIX socket,

 or host and port specifiers separated by white space.
 or host and port specifiers separated by white space.

-The host may a name or an IP address; the port is either a
+The host may be a name or an IP address; the port is either a

 single number or a pair of numbers with a dash between.
 Any further options are given, on separate lines,
 to the daemon as options before the main scan command.
 For example:
 .code
 single number or a pair of numbers with a dash between.
 Any further options are given, on separate lines,
 to the daemon as options before the main scan command.
 For example:
 .code

-av_scanner = avast:/var/run/avast4/local.sock:FLAGS -fullfiles:SENSITIVITY -pup
+av_scanner = avast:/var/run/avast/scan.sock:FLAGS -fullfiles:SENSITIVITY -pup

 av_scanner = avast:192.168.2.22 5036
 .endd
 If you omit the argument, the default path
 av_scanner = avast:192.168.2.22 5036
 .endd
 If you omit the argument, the default path

-&_/var/run/avast4/local.sock_&
+&_/var/run/avast/scan.sock_&

 is used.
 If you use a remote host,
 you need to make Exim's spool directory available to it,
 as the scanner is passed a file path, not file contents.
 is used.
 If you use a remote host,
 you need to make Exim's spool directory available to it,
 as the scanner is passed a file path, not file contents.

+For information about available commands and their options you may use 
+.code
+$ socat UNIX:/var/run/avast/scan.sock STDIO:
+    FLAGS
+    SENSITIVITY
+    PACK
+.endd

 
 
 .vitem &%aveserver%&
 
 
 .vitem &%aveserver%&


@@ -30531,7 +30576,8 @@ which case each use of the &%malware%& condition causes a new scan of the
 message.
 
 The &%malware%& condition takes a right-hand argument that is expanded before
 message.
 
 The &%malware%& condition takes a right-hand argument that is expanded before

-use. It can then be one of
+use and taken as a list, slash-separated by default.
+The first element can then be one of

 
 .ilist
 &"true"&, &"*"&, or &"1"&, in which case the message is scanned for viruses.
 
 .ilist
 &"true"&, &"*"&, or &"1"&, in which case the message is scanned for viruses.


@@ -30544,11 +30590,21 @@ the condition fails immediately.
 A regular expression, in which case the message is scanned for viruses. The
 condition succeeds if a virus is found and its name matches the regular
 expression. This allows you to take special actions on certain types of virus.
 A regular expression, in which case the message is scanned for viruses. The
 condition succeeds if a virus is found and its name matches the regular
 expression. This allows you to take special actions on certain types of virus.

+Note that &"/"& characters in the RE must be doubled due to the list-processing,
+unless the separator is changed (in the usual way).

 .endlist
 
 .endlist
 

-You can append &`/defer_ok`& to the &%malware%& condition to accept messages
-even if there is a problem with the virus scanner. Otherwise, such a problem
-causes the ACL to defer.
+You can append a &`defer_ok`& element to the &%malware%& argument list to accept
+messages even if there is a problem with the virus scanner.
+Otherwise, such a problem causes the ACL to defer.
+
+You can append a &`tmo=<val>`& element to the &%malware%& argument list to
+specify a non-default timeout.  The default is two minutes.
+For example:
+.code
+malware = * / defer_ok / tmo=10s
+.endd
+A timeout causes the ACL to defer.

 
 .vindex "&$malware_name$&"
 When a virus is found, the condition sets up an expansion variable called
 
 .vindex "&$malware_name$&"
 When a virus is found, the condition sets up an expansion variable called


@@ -33491,13 +33547,8 @@ failing addresses with their error messages.
 The third item is used to introduce any text from pipe transports that is to be
 returned to the sender. It is omitted if there is no such text.
 .next
 The third item is used to introduce any text from pipe transports that is to be
 returned to the sender. It is omitted if there is no such text.
 .next

-The fourth item is used to introduce the copy of the message that is returned
-as part of the error report.
-.next
-The fifth item is added after the fourth one if the returned message is
-truncated because it is bigger than &%return_size_limit%&.
-.next
-The sixth item is added after the copy of the original message.
+The fourth, fifth and sixth items will be ignored and may be empty.
+The fields exist for back-compatibility

 .endlist
 
 The default state (&%bounce_message_file%& unset) is equivalent to the
 .endlist
 
 The default state (&%bounce_message_file%& unset) is equivalent to the