admin user
changed uid/gid: privilege not needed
uid=EXIM_UID gid=EXIM_GID pid=pppp
-DSN: r1 propagating DSN
-DSN: r2 propagating DSN
seeking password data for user "CALLER": cache not available
getpwnam() succeeded uid=CALLER_UID gid=CALLER_GID
originator: uid=CALLER_UID gid=CALLER_GID login=CALLER name=CALLER_NAME
SMTP>> 250 OK
SMTP<< rcpt to:<abc@local>
using ACL "rcpt"
-processing "deny"
+processing "deny" (TESTSUITE/test-config 19)
check senders = qq@remote
address match test: subject=qq@remote pattern=qq@remote
remote in "remote"? yes (matched "remote")
domain = remote
route_item = * 127.0.0.1
remote in "*"? yes (matched "*")
-original list of hosts = "127.0.0.1" options =
-expanded list of hosts = "127.0.0.1" options =
+original list of hosts = '127.0.0.1' options = ''
+expanded list of hosts = '127.0.0.1' options = ''
set transport t2
finding IP address for 127.0.0.1
calling host_find_byname
+host_fake_gethostbyname returned 1 (HOST_NOT_FOUND)
using host_fake_gethostbyname for 127.0.0.1 (IPv4)
local host found for non-MX address
fully qualified name = 127.0.0.1
queued for t2 transport: local_part = qq
domain = remote
errors_to=NULL
- domain_data=NULL localpart_data=NULL
+ domain_data=remote local_part_data=NULL
routed by r2 router
envelope to: qq@remote
transport: t2
----------- end verify ------------
sender qq@remote verified ok
deny: condition test failed in ACL "rcpt"
-processing "warn"
+processing "warn" (TESTSUITE/test-config 21)
check senders = qq@remote
address match test: subject=qq@remote pattern=qq@remote
remote in "remote"? yes (matched "remote")
domain = remote
route_item = * 127.0.0.1
remote in "*"? yes (matched "*")
-original list of hosts = "127.0.0.1" options =
-expanded list of hosts = "127.0.0.1" options =
+original list of hosts = '127.0.0.1' options = ''
+expanded list of hosts = '127.0.0.1' options = ''
finding IP address for 127.0.0.1
calling host_find_byname
+host_fake_gethostbyname returned 1 (HOST_NOT_FOUND)
using host_fake_gethostbyname for 127.0.0.1 (IPv4)
local host found for non-MX address
fully qualified name = 127.0.0.1
queued for t2 transport: local_part = qq
domain = remote
errors_to=NULL
- domain_data=NULL localpart_data=NULL
+ domain_data=remote local_part_data=NULL
routed by r2 router
envelope to: qq@remote
transport: t2
host 127.0.0.1 [127.0.0.1]
Attempting full verification using callout
-locking TESTSUITE/spool/db/callout.lockfile
-locked TESTSUITE/spool/db/callout.lockfile
-EXIM_DBOPEN(TESTSUITE/spool/db/callout)
-returned from EXIM_DBOPEN
-opened hints database TESTSUITE/spool/db/callout: flags=O_RDWR
-dbfn_read: key=remote
-callout cache: found domain record for remote
-dbfn_read: key=qq@remote
-callout cache: no address record found for qq@remote
-closed hints database and lockfile
+ locking TESTSUITE/spool/db/callout.lockfile
+ locked TESTSUITE/spool/db/callout.lockfile
+ EXIM_DBOPEN: file <TESTSUITE/spool/db/callout> dir <TESTSUITE/spool/db> flags=O_RDWR
+ returned from EXIM_DBOPEN: 0xAAAAAAAA
+ opened hints database TESTSUITE/spool/db/callout: flags=O_RDWR
+ dbfn_read: key=remote
+ callout cache: found domain record for remote
+ dbfn_read: key=qq@remote
+ callout cache: no address record found for qq@remote
+ EXIM_DBCLOSE(0xAAAAAAAA)
+ closed hints database and lockfile
interface=NULL port=1224
-Connecting to 127.0.0.1 [127.0.0.1]:1224 ... connected
+Connecting to 127.0.0.1 [127.0.0.1]:1224 ... connected
SMTP<< 220 Server ready
127.0.0.1 in hosts_avoid_esmtp? no (option unset)
SMTP>> EHLO mail.test.ex
cmd buf flush ddd bytes
SMTP<< 250 OK
+not using PIPELINING
+not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
SMTP>> MAIL FROM:<>
cmd buf flush ddd bytes
SMTP<< 250 OK
SMTP>> RCPT TO:<qq@remote>
cmd buf flush ddd bytes
+sync_responses expect rcpt
SMTP<< 550 Unknown
SMTP>> QUIT
cmd buf flush ddd bytes
-locking TESTSUITE/spool/db/callout.lockfile
-locked TESTSUITE/spool/db/callout.lockfile
-EXIM_DBOPEN(TESTSUITE/spool/db/callout)
-returned from EXIM_DBOPEN
-opened hints database TESTSUITE/spool/db/callout: flags=O_RDWR|O_CREAT
-dbfn_write: key=remote
-wrote callout cache domain record for remote:
- result=1 postmaster=0 random=0
-dbfn_write: key=qq@remote
-wrote negative callout cache address record for qq@remote
-closed hints database and lockfile
+ SMTP<< 250 OK
+ SMTP(close)>>
+ locking TESTSUITE/spool/db/callout.lockfile
+ locked TESTSUITE/spool/db/callout.lockfile
+ EXIM_DBOPEN: file <TESTSUITE/spool/db/callout> dir <TESTSUITE/spool/db> flags=O_RDWR|O_CREAT
+ returned from EXIM_DBOPEN: 0xAAAAAAAA
+ opened hints database TESTSUITE/spool/db/callout: flags=O_RDWR|O_CREAT
+ dbfn_write: key=remote
+ wrote callout cache domain record for remote:
+ result=1 postmaster=0 random=0
+ dbfn_write: key=qq@remote
+ wrote negative callout cache address record for qq@remote
+ EXIM_DBCLOSE(0xAAAAAAAA)
+ closed hints database and lockfile
----------- end verify ------------
l_message: $acl_verify_message
warn: condition test succeeded in ACL "rcpt"
LOG: MAIN
- U=CALLER Warning: Sender verify failed: response to "RCPT TO:<qq@remote>" from 127.0.0.1 [127.0.0.1] was: 550 Unknown
-processing "accept"
+ U=CALLER Warning: Sender verify failed: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<qq@remote>: 550 Unknown
+processing "accept" (TESTSUITE/test-config 24)
check senders = qq@remote
address match test: subject=qq@remote pattern=qq@remote
remote in "remote"? yes (matched "remote")
accept: condition test succeeded in ACL "rcpt"
end of ACL "rcpt": ACCEPT
SMTP>> 250 Accepted
-DSN: orcpt: NULL flags: 0
SMTP<< rcpt to:<xyz@local>
using ACL "rcpt"
-processing "deny"
+processing "deny" (TESTSUITE/test-config 19)
check senders = qq@remote
address match test: subject=qq@remote pattern=qq@remote
remote in "remote"? yes (matched "remote")
check !verify = sender
using cached sender verify result
deny: condition test failed in ACL "rcpt"
-processing "warn"
+processing "warn" (TESTSUITE/test-config 21)
check senders = qq@remote
address match test: subject=qq@remote pattern=qq@remote
remote in "remote"? yes (matched "remote")
domain = remote
route_item = * 127.0.0.1
remote in "*"? yes (matched "*")
-original list of hosts = "127.0.0.1" options =
-expanded list of hosts = "127.0.0.1" options =
+original list of hosts = '127.0.0.1' options = ''
+expanded list of hosts = '127.0.0.1' options = ''
finding IP address for 127.0.0.1
calling host_find_byname
+host_fake_gethostbyname returned 1 (HOST_NOT_FOUND)
using host_fake_gethostbyname for 127.0.0.1 (IPv4)
local host found for non-MX address
fully qualified name = 127.0.0.1
queued for t2 transport: local_part = qq
domain = remote
errors_to=NULL
- domain_data=NULL localpart_data=NULL
+ domain_data=remote local_part_data=NULL
routed by r2 router
envelope to: qq@remote
transport: t2
host 127.0.0.1 [127.0.0.1]
Attempting full verification using callout
-locking TESTSUITE/spool/db/callout.lockfile
-locked TESTSUITE/spool/db/callout.lockfile
-EXIM_DBOPEN(TESTSUITE/spool/db/callout)
-returned from EXIM_DBOPEN
-opened hints database TESTSUITE/spool/db/callout: flags=O_RDWR
-dbfn_read: key=remote
-callout cache: found domain record for remote
-dbfn_read: key=qq@remote
-callout cache: found address record for qq@remote
-callout cache: address record is negative
-closed hints database and lockfile
+ locking TESTSUITE/spool/db/callout.lockfile
+ locked TESTSUITE/spool/db/callout.lockfile
+ EXIM_DBOPEN: file <TESTSUITE/spool/db/callout> dir <TESTSUITE/spool/db> flags=O_RDWR
+ returned from EXIM_DBOPEN: 0xAAAAAAAA
+ opened hints database TESTSUITE/spool/db/callout: flags=O_RDWR
+ dbfn_read: key=remote
+ callout cache: found domain record for remote
+ dbfn_read: key=qq@remote
+ callout cache: found address record for qq@remote
+ callout cache: address record is negative
+ EXIM_DBCLOSE(0xAAAAAAAA)
+ closed hints database and lockfile
----------- end verify ------------
l_message: $acl_verify_message
warn: condition test succeeded in ACL "rcpt"
LOG: MAIN
U=CALLER Warning: Sender verify failed
-processing "accept"
+processing "accept" (TESTSUITE/test-config 24)
check senders = qq@remote
address match test: subject=qq@remote pattern=qq@remote
remote in "remote"? yes (matched "remote")
accept: condition test succeeded in ACL "rcpt"
end of ACL "rcpt": ACCEPT
SMTP>> 250 Accepted
-DSN: orcpt: NULL flags: 0
SMTP<< quit
SMTP>> 221 mail.test.ex closing connection
LOG: smtp_connection MAIN
SMTP connection from CALLER closed by QUIT
search_tidyup called
->>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
+>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
git://git.exim.org / users / heiko / exim.git / blobdiff