-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.123 2005/04/07 15:37:13 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.220 2005/09/12 13:39:31 ph10 Exp $
Change log file for Exim from version 4.21
-------------------------------------------
+Exim version 4.53
+-----------------
+
+TK/01 Added the "success_on_redirect" address verification option. See
+ NewStuff for rationale and an example.
+
+PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
+
+PH/02 Patch to exigrep to allow it to work on syslog lines.
+
+PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
+ fread() to skip over the body file's header line, because in Cygwin the
+ header line is locked and is inaccessible.
+
+PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
+ co-exist for some time) to make it clear that it is the Exim ID that is
+ referenced, not the Message-ID: header line.
+
+PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
+ string_format() function, because snprintf() does not exist on all
+ operating systems.
+
+PH/06 The use of forbid_filter_existstest now also locks out the use of the
+ ${stat: expansion item.
+
+PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
+ protocol synchronization error", to keep the pedants happy.
+
+PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
+ well as for IRIX systems, when gcc is being used. See the host.c source
+ file for comments.
+
+PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
+
+PH/10 Named domain lists were not working if used in a queue_smtp_domains
+ setting.
+
+PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
+ transport and to the smtp transport in LMTP mode.
+
+TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
+
+PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
+ run a filter in a subprocess. This could lead to confusion in subsequent
+ lookups in the parent process. There should also be a search_tidyup() at
+ the end of the subprocess.
+
+PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
+ only if the host matched helo_try_verify_hosts, which caused the
+ verification to occur when the EHLO/HELO command was issued. The ACL just
+ tested the remembered result. Now, if a previous verification attempt has
+ not happened, "verify = helo" does it there and then.
+
+JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
+
+TK/03 Fix log output including CR from clamd.
+
+PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
+ exist provoked a memory error which could cause a segfault.
+
+PH/15 Installed PCRE 6.2
+
+PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
+
+PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
+ of the problem. Specifically, suggested +O2 rather than +O1 for the
+ HP-UX compiler.
+
+PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
+
+PH/20 If a delivery was routed to a non-standard port by means of an SRV
+ record, the port was not correctly logged when the outgoing_port log
+ selector was set (it logged the transort's default port).
+
+PH/21 Added support for host-specific ports to manualroute, queryprogram,
+ fallback_hosts, and "hosts" in the smtp transport.
+
+PH/22 If the log selector "outgoing_port" is set, the port is now also given on
+ host errors such as "Connection refused".
+
+PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
+ authentication with radiusclient 0.4.9:
+
+ - Error returned from rc_read_config was caught wrongly
+ - Username/password not passed on to radius server due to wrong length.
+
+ The presumption is that some radiusclient API changes for 4.51/PH/17
+ were not taken care of correctly. The code is still untested by me (my
+ Linux distribution still has 0.3.2 of radiusclient), but it was
+ contributed by a Radius user.
+
+PH/24 When doing a callout, the value of $domain wasn't set correctly when
+ expanding the "port" option of the smtp transport.
+
+TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
+ while reading a MIME header. Thanks to Tom Hughes for a patch.
+
+PH/24 Include config.h inside local_scan.h so that configuration settings are
+ available.
+
+PH/25 Make $smtp_command_argument available after all SMTP commands. This means
+ that in an ACL for RCPT (for example), you can examine exactly what was
+ received.
+
+PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
+ commands, but it was not correctly comparing the address with the actual
+ client host address. Thus, it would show the EHLO address in Received:
+ header lines when this was not necessary.
+
+PH/27 Added the % operator to ${eval:}.
+
+PH/28 Exim tries to create and chdir to its spool directory when it starts;
+ it should be ignoring failures (because with -C, for example, it has lost
+ privilege). It wasn't ignoring creation failures other than "already
+ exists".
+
+PH/29 Added "crypteq" to the list of supported features that Exim outputs when
+ -bV or -d is used.
+
+PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed
+ because an input line was too long, either on its own, or by virtue of
+ too many continuations, the temporary file was not being removed, and the
+ return code was incorrect.
+
+PH/31 Missing "BOOL" in function definition in filtertest.c.
+
+PH/32 Applied Sieve patches from the maintainer.
+
+TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67.
+
+PH/33 Added "verify = not_blind".
+
+PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in
+ Local/Makefile (with some defaults set). These are used in built scripts
+ such as exicyclog, but they have never been used in the exim_install
+ script (though there are many overriding facilities there). I have
+ arranged that the exim_install script now takes note of these two
+ settings.
+
+PH/35 Installed configuration files for Dragonfly.
+
+PH/36 When a locally submitted message by a trusted user did not contain a
+ From: header, and the sender address was obtained from -f or from an SMTP
+ MAIL command, and the trusted user did not use -F to supply a sender
+ name, $originator_name was incorrectly used when constructing a From:
+ header. Furthermore, $originator_name was used for submission mode
+ messages from external hosts without From: headers in a similar way,
+ which is clearly wrong.
+
+PH/37 Added control=suppress_local_fixups.
+
+PH/38 When log_selector = +received_sender was set, and the addition of the
+ sender made the log line's construction buffer exactly full, or one byte
+ less than full, an overflow happened when the terminating "\n" was
+ subsequently added.
+
+PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry
+ when the result of a list match is failure because a DNS lookup failed.
+
+
+Exim version 4.52
+-----------------
+
+TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
+
+PH/01 When a transport filter timed out in a pipe delivery, and the pipe
+ command itself ended in error, the underlying message about the transport
+ filter timeout was being overwritten with the pipe command error. Now the
+ underlying error message should be appended to the second error message.
+
+TK/01 Fix poll() being unavailable on Mac OSX 10.2.
+
+PH/02 Reduce the amount of output that "make" produces by default. Full output
+ can still be requested.
+
+PH/03 The warning log line about a condition test deferring for a "warn" verb
+ was being output only once per connection, rather than after each
+ occurrence (because it was using the same function as for successful
+ "warn" verbs). This seems wrong, so I have changed it.
+
+TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
+ it should not have, which might have caused a crash in the right
+ circumstances, but probably never did.
+
+PH/04 Installed a modified version of Tony Finch's patch to make submission
+ mode fix the return path as well as the Sender: header line, and to
+ add a /name= option so that you can make the user's friendly name appear
+ in the header line.
+
+TF/03 Added the control = fakedefer ACL modifier.
+
+TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
+ Mark Lowes for thorough testing.
+
+TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
+
+TK/03 Merged latest SRS patch from Miles Wilton.
+
+PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
+ with the definition in sysexits.h (which is #included earlier).
+ Fortunately, Exim does not actually use EX_OK. The code used to try to
+ preserve the sysexits.h value, by assumimg that macro definitions were
+ scanned for macro replacements. I have been disabused of this notion,
+ so now the code just undefines EX_OK before #including unistd.h.
+
+PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
+ in the smtp transport. When a block could not be written in a single
+ write() function, the timeout was being re-applied to each part-write.
+ This seems wrong - if the receiver was accepting one byte at a time it
+ would take for ever. The timeout is now adjusted when this happens. It
+ doesn't have to be particularly precise.
+
+TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
+ details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
+
+PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
+ without a domain if the check to <postmaster@domain> fails.
+
+SC/01 Eximstats: added -xls and the ability to specify output files
+ (patch written by Frank Heydlauf).
+
+SC/02 Eximstats: use FileHandles for outputing results.
+
+SC/03 Eximstats: allow any combination of xls, txt, and html output.
+
+SC/04 Eximstats: fixed display of large numbers with -nvr option
+
+SC/05 Eximstats: fixed merging of reports with empty tables.
+
+SC/06 Eximstats: added the -include_original_destination flag
+
+SC/07 Eximstats: removed tabs and trailing whitespace.
+
+TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
+
+TK/06 MBOX spool code: Add real "From " MBOX separator line
+ so the .eml file is really in mbox format (even though
+ most programs do not really care). Patch from Alex Miller.
+
+TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
+ The latter is generated from $received_to and is only set if the
+ message has one envelope recipient. SA can use these headers,
+ obviously out-of-the-box. Patch from Alex Miller.
+
+PH/08 The ${def test on a variable was returning false if the variable's
+ value was "0", contrary to what the specification has always said!
+ The result should be true unless the variable is empty.
+
+PH/09 The syntax error of a character other than { following "${if
+ def:variable_name" (after optional whitespace) was not being diagnosed.
+ An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
+ accidental colon was present, for example, could give incorrect results.
+
+PH/10 Tidied the code in a number of places where the st_size field of a stat()
+ result is used (not including appendfile, where other changes are about
+ to be made).
+
+PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
+ This involved changing a lot of size variables from int to off_t. It
+ should work with maildirs and everything.
+
+TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
+ spamd dying while we are connected to it.
+
+TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
+ <jgh@wizmail.org>
+
+PH/12 Applied Alex Kiernan's patch for the API change for the error callback
+ function for BDB 4.3.
+
+PH/13 Changed auto_thaw such that it does not apply to bounce messages.
+
+PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
+ the sources for PCRE have been re-arranged and more files are now
+ involved.
+
+PH/15 The code I had for printing potentially long long variables in PH/11
+ above was not the best (it lost precision). The length of off_t variables
+ is now inspected at build time, and an appropriate printing format (%ld
+ or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T
+ to be "long long int" or "long int". This is needed for the internal
+ formatting function string_vformat().
+
+PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
+ the configuration file to be ":syslog", then the script "guesses" where
+ the logs files are, rather than using the compiled in default. In our
+ case the guess is not the same as the compiled default, so the script
+ suddenly stopped working when I started to use syslog. The patch checks
+ to see if log_file_path is "". If so, it attempts to read it from exim
+ with no configuration file to get the compiled in version, before it
+ falls back to the previous guessing code."
+
+TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
+ implementing BATV in an Exim configuration. See NewStuff for the gory
+ details.
+
+PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
+ Makefile that are specific to HP-UX.
+
+PH/18 If the "use_postmaster" option was set for a recipient callout together
+ with the "random" option, the postmaster address was used as the MAIL
+ FROM address for the random test, but not for the subsequent recipient
+ test. It is now used for both.
+
+PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
+ patch removes a few documentation additions to RFC 3028, because the
+ latest draft now contains them. It adds the new en;ascii-case comparator
+ and a new error check for 8bit text in MIME parts. Comparator and
+ require names are now matched exactly. I enabled the subaddress
+ extension, but it is not well tested yet (read: it works for me)."
+
+PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
+ rework some of the code of TK/09 above to avoid the hardwired use of
+ "%lld" and "long long". Replaced the call to snprintf() with a call to
+ string_vformat().
+
+PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX
+ records point to non-existent hosts", "retry timeout exceeded", and
+ "retry time not reached for any host after a long failure period".
+
+PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
+ experimental DomainKeys support:
+
+ (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
+ (2) On an error such as an illegally used "control", the wrong name for
+ the control was given.
+
+ These problems did NOT occur unless DomainKeys support was compiled.
+
+PH/23 Added daemon_startup_retries and daemon_startup_sleep.
+
+PH/24 Added ${if match_ip condition.
+
+PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
+ databases so that it will be absolutely obvious if a crash occurs in the
+ DB library. This is a regular occurrence (often caused by mis-matched
+ db.h files).
+
+PH/26 Insert a lot of missing (void) casts for functions such as chown(),
+ chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
+ picked up on a user's system that detects such things. There doesn't seem
+ to be a gcc warning option for this - only an attribute that has to be
+ put on the function's prototype. It seems that in Fedora Core 4 they have
+ set this on a number of new functions. No doubt there will be more in due
+ course.
+
+PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
+ specify a transport. However, if an address that was verified by such a
+ router was the subject of a callout, Exim crashed because it tried to
+ read the rcpt_include_affixes from the non-existent transport. Now it
+ just assumes that the setting of that option is false. This bug was
+ introduced by 4.51/PH/31.
+
+PH/28 Changed -d+all to exclude +memory, because that information is very
+ rarely of interest, but it makes the output a lot bigger. People tend to
+ do -d+all out of habit.
+
+PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
+ code in os-type was giving problems when libc.so lives in lib64, like on
+ x86_64 Fedora Core.
+
+PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
+ aren't the modern standard, and it seems that some systems' include files
+ don't always have them. Exim was already checking for some of the newer
+ ones like T_AAAA, and defining it itself. I've added checks for all the
+ record types that Exim uses.
+
+PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was
+ not automatically generating a new one, as it is supposed to. This
+ prevented TLS from working. If the file did exist, but contained invalid
+ data, a new version was generated, as expected. It was only the case of a
+ non-existent file that was broken.
+
+TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
+ with a change in libdomainkeys > 0.64.
+
+TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
+ from DNS. If the selector record carries the flag, it now has
+ precedence over the domain-wide flag.
+
+TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
+
+PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as
+ the use of a port name that isn't defined in /etc/services) occurred, the
+ message was deferred as in a normal delivery, and thus remained on the
+ spool, instead of being failed because of the mua_wrapper setting. This
+ is now fixed, and I tidied up some of the mua_wrapper messages at the
+ same time.
+
+SC/08 Eximstats: whilst parsing the mainlog(s), store information about
+ the messages in a hash of arrays rather than using individual hashes.
+ This is a bit cleaner and results in dramatic memory savings, albeit
+ at a slight CPU cost.
+
+SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
+ as requested by Marc Sherman.
+
+SC/10 Eximstats: added histograms for user specified patterns as requested
+ by Marc Sherman.
+
+SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified.
+
+PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of
+ fopen() in the content-scanning modules that did not already have it.
+
Exim version 4.51
-----------------
PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
an address' error message when a string expansion fails (syntax or
- whatever). Otherwise not only does the password appear in the log, it may
- also be put in a bounce message.
+ whatever). Otherwise the password may appear in the log. Following change
+ PH/42 below, there is no longer a chance of it appearing in a bounce
+ message.
PH/11 Installed exipick version 20050225.0 from John Jetmore.
still happens during the routing process, since they are not going to be
routed further.
+PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
+ It corrects a timeout issue with spamd. This is Ian's comment: "The
+ background is that sometimes spamd either never reads data from a
+ connection it has accepted, or it never writes response data. The exiscan
+ spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
+ blindly assumes that writes won't block so it may never time out."
+
+PH/39 Allow G after quota size as well as K and M.
+
+PH/40 The value set for $authenticated_id in an authenticator may not contain
+ binary zeroes or newlines because the value is written to log lines and
+ to spool files. There was no check on this. Now the value is run through
+ the string_printing() function so that such characters are converted to
+ printable escape sequences.
+
+PH/41 $message_linecount is a new variable that contains the total number of
+ lines in the message. Compare $body_linecount, which is the count for the
+ body only.
+
+PH/42 Exim no longer gives details of delivery errors for specific addresses in
+ bounce and delay warning messages, except in certain special cases, which
+ are as follows:
+
+ (a) An SMTP error message from a remote host;
+ (b) A message specified in a :fail: redirection;
+ (c) A message specified in a "fail" command in a system filter;
+ (d) A message specified in a FAIL return from the queryprogram router;
+ (e) A message specified by the cannot_route_message router option.
+
+ In these cases only, Exim does include the error details in bounce and
+ warning messages. There are also a few cases where bland messages such
+ as "unrouteable address" or "local delivery error" are given.
+
+PH/43 $value is now also set for the "else" part of a ${run expansion.
+
+PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
+ being worked on, but at least Exim now implements the latest version to
+ play with."
+
+PH/45 In a pipe transport, although a timeout while waiting for the pipe
+ process to complete was treated as a delivery failure, a timeout while
+ writing the message to the pipe was logged, but erroneously treated as a
+ successful delivery. Such timeouts include transport filter timeouts. For
+ consistency with the overall process timeout, these timeouts are now
+ treated as errors, giving rise to delivery failures by default. However,
+ there is now a new Boolean option for the pipe transport called
+ timeout_defer, which, if set TRUE, converts the failures into defers for
+ both kinds of timeout. A transport filter timeout is now identified in
+ the log output.
+
+PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
+ systems where "make" and "gmake" are different, calling "gmake" at top
+ level broke things. I've arranged for the value of $(MAKE) to be passed
+ from the Makefile to this script so that it can call the same version of
+ "make".
+
A note about Exim versions 4.44 and 4.50
----------------------------------------
git://git.exim.org / users / heiko / exim.git / blobdiff