This document last updated for:
-Test Suite Version: 4.67
-Date: 20 February 2007
+Test Suite Version: 4.87
+Date: 30 January 2016
BACKGROUND
Defaults:exim-build timestamp_timeout=480,!tty_tickets
-(3) The login under which you run the tests must be in the exim group so that
- it has access to logs, spool files, etc. The login should not be one of the
- names "userx", "usery", "userz", or a few other simple ones such as "abcd"
- and "xyz" and single letters that are used in the tests. The test suite
- expects the login to have a gecos name; I think it will now run if the
- gecos field is empty but there may be anomalies.
+(3) The login under which you run the tests must have the exim group as a
+ secondary so that it has access to logs, spool files, etc. However, it
+ should have a different primary group (eg. "users" vs. "eximgroup"). The
+ login should not be one of the names "userx", "usery", "userz", or a few
+ other simple ones such as "abcd" and "xyz" and single letters that are used
+ in the tests. The test suite expects the login to have a gecos name; I think
+ it will now run if the gecos field is empty but there may be anomalies.
The login must not contain a dash or an equal sign. (Otherwise some tests
about local_from_{suffix,prefix} will fail.)
is also an IPv6 address, additional tests are run when the Exim binary
contains IPv6 support. There are checks in the scripts for a running IPv4
interface; when one is not found, some tests are skipped (with a warning
- message). The local net may not be in 10.0/8 as that is used by the suite.
+ message). The local net may not be in 10.250.0/16 as that is used by the suite.
(9) Exim must be built with TRUSTED_CONFIG_LIST support, so that the test
configs can be placed into it. A suitable file location is .../exim/test/trusted_configs
with content .../exim/test/test-config [fill out the ... to make full
paths]. This file should be owner/group matching CONFIGURE_OWNER/GROUP,
- or root/root. The config files in .../exim/test/confs/ should be owner/group the same.
- DISABLE_D_OPTION must not be used. If ALT_CONFIG_PREFIX is used, it
+ or root/root, and it has to be accessible for the login, under which
+ you run the tests. The config files in .../exim/test/confs/ should be
+ owner/group the same. DISABLE_D_OPTION must not be used. If ALT_CONFIG_PREFIX is used, it
must contain the directory of the test-suite. WHITELIST_D_MACROS should contain:
-
- DIR:EXIM_PATH:AA:ACL:ACLRCPT:ACL_MAIL:ACL_PREDATA:ACL_RCPT:AFFIX:ALLOW:ARG1:ARG2:AUTHF:AUTHS:AUTH_ID_DOMAIN:BAD:BANNER:BB:BR:BRB:CERT:COM:COMMAND_USER:CONNECTCOND:CONTROL:CREQCIP:CREQMAC:CRL:CSS:D6:DATA:DCF:DDF:DEFAULTDWC:DELAY:DETAILS:DRATELIMIT:DYNAMIC_OPTION:ELI:ERROR_DETAILS:ERT:FAKE:FALLBACK:FILTER:FILTER_PREPEND_HOME:FORBID:FORBID_SMTP_CODE:FUSER:HAI:HAP:HARDLIMIT:HEADER_LINE_MAXSIZE:HEADER_MAXSIZE:HELO_MSG:HL:HOSTS:HOSTS_AVOID_TLS:HOSTS_MAX_TRY:HVH:IFACE:IGNORE_QUOTA:INC:INSERT:IP1:IP2:LAST:LDAPSERVERS:LENCHECK:LIMIT:LIST:LOG_SELECTOR:LS:MAXNM:MESSAGE_LOGS:MSIZE:NOTDAEMON:ONCE:ONLY:OPT:OPTION:ORDER:PAH:PEX:PORT:PTBC:QDG:QOLL:QUOTA:QUOTA_FILECOUNT:QWM:RCPT_MSG:REMEMBER:REQUIRE:RETRY:RETRY1:RETRY2:RETURN:RETURN_ERROR_DETAILS:REWRITE:ROUTE_DATA:RRATELIMIT:RT:S:SELECTOR:SELF:SERVER:SERVERS:SREQCIP:SREQMAC:SRV:STD:STRICT:SUB:SUBMISSION_OPTIONS:TIMEOUTDEFER:TIMES:TRUSTED:TRYCLEAR:UL:USE_SENDER:UTF8:VALUE:WMF:X:Y
+
+ DIR:EXIM_PATH:AA:ACL:ACLRCPT:ACL_MAIL:ACL_PREDATA:ACL_RCPT:AFFIX:ALLOW:ARG1:ARG2:AUTHF:AUTHS:AUTH_ID_DOMAIN:BAD:BANNER:BB:BR:BRB:CERT:COM:COMMAND_USER:CONNECTCOND:CONTROL:CREQCIP:CREQMAC:CRL:CSS:D6:DATA:DCF:DDF:DEFAULTDWC:DELAY:DETAILS:DRATELIMIT:DYNAMIC_OPTION:ELI:ERROR_DETAILS:ERT:FAKE:FALLBACK:FILTER:FILTER_PREPEND_HOME:FORBID:FORBID_SMTP_CODE:FUSER:HAI:HAP:HARDLIMIT:HEADER_LINE_MAXSIZE:HEADER_MAXSIZE:HELO_MSG:HL:HOSTS:HOSTS_AVOID_TLS:HOSTS_MAX_TRY:HVH:IFACE:IGNORE_QUOTA:INC:INSERT:IP1:IP2:LAST:LDAPSERVERS:LENCHECK:LIMIT:LIST:LOG_SELECTOR:MAXNM:MESSAGE_LOGS:MSIZE:NOTDAEMON:ONCE:ONLY:OPT:OPTION:ORDER:PAH:PEX:PORT:PTBC:QDG:QOLL:QUOTA:QUOTA_FILECOUNT:QWM:RCPT_MSG:REMEMBER:REQUIRE:RETRY:RETRY1:RETRY2:RETURN:RETURN_ERROR_DETAILS:REWRITE:ROUTE_DATA:RRATELIMIT:SELECTOR:SELF:SERVER:SERVERS:SREQCIP:SREQMAC:SRV:STRICT:SUB:SUBMISSION_OPTIONS:TIMEOUTDEFER:TIMES:TRUSTED:TRYCLEAR:UL:USE_SENDER:UTF8:VALUE:WMF
(10) Exim must *not* be built with USE_READLINE, as the test-suite's automation
assumes the simpler I/O model.
RUNNING THE TEST SUITE
----------------------
-(1) Download the tarball exim-testsuite-x.xx.tar.bz2 and unpack it, preferably
- in a directory alongside an Exim source directory (see below).
+(1) Clone the git tree for Exim. This include both the Exim source and the
+ testsuite.
-(2) cd into the exim-testsuite-x.xx directory.
+(2) cd into the test/ subdirectory (where this README lives).
-(3) Run "autoconf" then "./configure" and then "make". This builds a few
- auxiliary programs that are written in C.
+(3) Run "./configure" and then "make". This builds a few auxiliary programs that
+ are written in C.
(4) echo $PWD/test-config >> your_TRUSTED_CONFIG_LIST_filename
Typically that is .../exim/test/trusted_configs
------------------
If you do not supply any arguments to ./runtest, it searches for an Exim
-source tree at the same level as the test suite directory. It then looks for an
-Exim binary in a "build" directory of that source tree. If there are several
-Exim source trees, it chooses the latest version of Exim. Consider the
-following example:
+source tree at the same level as the test suite directory. A source tree
+is a source tree, if it contains a build-* directory.
+
+It then looks for an Exim binary in a "build" directory of that source
+tree. If there are several Exim source trees, it chooses the latest
+version of Exim. Consider the following example:
$ ls -F /source/exim
exim-4.60/ exim-4.62/ exim-testsuite-x.xx/
(If it turns out that most people prefer to use diff, I'll change
the default.)
+ -FLAVOR <flavor>
+ -FLAVOUR <flavour>
+ This allows "overrides" for the test results. It's intended
+ use is to deal with distro specific differences in the test
+ output. The default flavour is "FOO" if autodetection fails.
+ (Autodetection is possible for known flavours only. Known
+ flavours are computed after file name extensions in stdout/*
+ and stderr/*.)
+
+ If during the test run differences between the current and
+ the expected output are found and no flavour file exists already,
+ you may update the "common" expected output or you may create a
+ flavour file. If a flavour file already exists, any updates will go
+ into that flavour file!
+
-KEEP Normally, after a successful run, the test output files are
deleted. This option prevents this. It is useful when running a
single test, in order to look at the actual output before it is
maintainer after making a change to the code that affects a lot of
tests (for example, the wording of a message).
+ -SLOW For very slow hosts that appear to have Heisenbugs, delay before
+ comparing output files from a testcase
+
The options for ./runtest must be given first (but after the name of the
binary, if present). Any further options, that is, items on the command line
that start with a hyphen, are passed to the Exim binary when it is run as part
Other circumstances give rise to other prompts. If a test generates output for
which there is no saved data, the prompt (after a message stating which file is
-unexpectely not empty) is:
+unexpectedly not empty) is:
Continue, Show, or Quit? [Q]
This is built only if OpenSSL support is detected on the
host.
+bin/client-anytls A symlink to either client-ssl or client-gnutls, if
+ any is built.
+
bin/fakens A fake "nameserver" for DNS tests (see below for details).
bin/fd A program that outputs details of open file descriptors.
PORT_D is replaced by a port number for normal daemon use
PORT_N is replaced by a port number that should never respond
PORT_S is replaced by a port number for normal bin/server use
+ PORT_DYNAMIC is replaced by a port number allocated dynamically
TESTNUM is replaced by the current test number
V4NET is replaced by an IPv4 network number for testing
V6NET is replaced by an IPv6 network number for testing
they are networks that can never be used for an IP address of a real host. I've
chosen two multicast networks for the moment.
+PORT_DYNAMIC is allocated by hunting for a free port (starting at port
+1024) a listener can bind to. This is done by runtest, for simulating
+inetd operations.
+
If the host has no IPv6 address, "<no IPv6 address found>" is substituted but
that does not matter because no IPv6 tests will be run. A similar substitution
is made if there is no IPv4 address, and again, tests that actually require a
The expected return code in this case is 1, and the data lines are passed to
Exim on its standard input. Both the command line and the data lines have the
-standard substitions applied to them. Thus, HOSTNAME in the example above will
+standard substitutions applied to them. Thus, HOSTNAME in the example above will
be replaced by the local host's name. Long commands can be continued over
several lines by using \ as a continuation character. This does *not* apply to
data lines.
These commands are not followed by any input data, or by a line of asterisks.
+ ### This is a verbose comment
+
+A line starting with three hashmarks and some space copies the following text to
+both stdout and stderr file being written by the test.
+
dbmbuild <file1> <file1>
This command runs the exim_dbmbuild utility to build a DBM file. It is used
exim_lock [options] <file name>
This command runs the exim_lock utility with the given options and file name.
-The file remains locked with the following command (normally exim) is obeyed.
+The file remains locked for following commands until a non-daemon "exim"
+completes.
exinext <data>
need_largefiles
This command must be at the head of a script. If the Exim binary does not
-suppport large files (off_t is <= 4), the entire script is skipped, and a
+support large files (off_t is <= 4), the entire script is skipped, and a
comment is output.
terminated by four asterisks. Even if no data is required for the particular
usage, the asterisks must be given.
+If the input line starts with '>>> ', this prefix and any trailing spaces
+(including line feed) are removed. The reminder is processed with Perl's
+string eval() function, effectivly evaluatiing escape sequences like
+'\x41', or '\r'. If you need a line feed there, you need to encode it
+according to your needs.
+
+If the input line starts with '\>>> ', the backslash is removed and the
+rest of the line is passed as input. This is used by the client tool,
+which understands the '>>> ' prefix for similar processing.
+
+
+ background
+
+This command takes one script line and runs it in the background,
+in parallel with following commands. For external daemons, eg. redis-server.
+
catwrite <file name> [nxm[=start-of-line-text]]*
as well as to the named file.
-
client [<options>] <ip address> <port> [<outgoing interface>]
This command runs the auxiliary "client" program that simulates an SMTP client.
program is compiled, one that supports TLS using OpenSSL. The additional
arguments specify a certificate and key file when required for the connection.
There are two additional options: -tls-on-connect, that causes the client to
-initiate TLS negociation immediately on connection; -ocsp that causes the TLS
+initiate TLS negotiation immediately on connection; -ocsp that causes the TLS
negotiation to include a certificate-status request. The latter takes a
filename argument, the CA info for verifying the stapled response.
-d causes the server to output debugging information
-t <sec> sets a timeout (default 5) for when the server is
- awaiting an incoming connection
+ awaiting an incoming connection. If negative, the
+ absolute value is used and a timeout results in a
+ nonfailure exit code
-noipv4 causes the server not to set up an IPv4 socket
The following lines, up to a line of four asterisks, are the server's
controlling standard input (described below). These lines are read and
-remembered; during the following commands, until an "exim" command is reached,
-the server is run in parallel.
+remembered; during the following commands, until a non-deamon "exim" command
+is reached, the server is run in parallel. Then the server termination
+is waited for.
write <file name> [nxm[=start-of-line-text]]*
CLIENT SCRIPTS
--------------
-Lines in client scripts are of two kinds:
+Lines in client scripts are of several kinds:
(1) If a line begins with three question marks and a space, the rest of the
line defines the start of expected output from the server. If what is
received does not match, the client bombs out with an error message.
-(2) If a line starts with three plus signs followed by a space, the rest of the
+(2) If a line begins with three question marks and an asterisk, the server
+ is expected to close the connection.
+
+(3) If a line begins with four question marks, the rest of the line defines
+ the start of one or more possible output lines from the server. When it
+ matches, the client silently repeats the comparison using the next server
+ line. When the match fails, the client silently proceeds to the next script
+ line with the then-current server output unconsumed.
+
+(4) If a line starts with three plus signs followed by a space, the rest of the
line specifies a number of seconds to sleep for before proceeding.
-(3) Otherwise, the line is an input line line that is sent to the server. Any
+(5) If a line begins with three '>' characters and a space, the rest of the
+ line is input to be sent to the server. Backslash escaping is done as
+ described below, but no trailing "\r\n" is sent. As the runtest's
+ input processing catches the '>>> ' for its string eval, you may
+ want to escape from this first stage processing by prefixing your
+ line with '\'.
+
+(6) If a line begin with three '<' characters and a space, the rest of the
+ line is a filename; the content of the file is inserted into the script
+ at this point.
+
+(7) Otherwise, the line is an input line line that is sent to the server. Any
occurrences of \r and \n in the line are turned into carriage return and
linefeed, respectively. This is used for testing PIPELINING.
+ Any sequences of \x followed by two hex digits are converted to the equivalent
+ byte value. Any other character following a \ is sent verbatim.
+ The line is sent with a trailing "\r\n".
Here is a simple example:
client 127.0.0.1 PORT_D
- ??? 250
+ ??? 220
EHLO xxx
??? 250-
??? 250
example, some TLS certificates) are used by more than one test, and so their
names are not of this form.
-There are also some auxilary DNS zone files, which are described in the next
+There are also some auxiliary DNS zone files, which are described in the next
section.
data block. The addresses that are generated are in the
10.250.0.0/16 network.
-The domain names that are handled directly by Exim, without being passed to
-fakens, are:
-
test.again.dns This always provokes a TRY_AGAIN response, for testing the
handling of temporary DNS error. If the full domain name
starts with digits, a delay of that many seconds occurs.
test.fail.dns This always provokes a NO_RECOVERY response, for testing
DNS server failures.
-This special handling could now be done in the fakens program, but while the
-old test suite is still being used it has to be done in Exim itself, so for the
-moment it remains there.
-
The use of gethostbyname() and its IPv6 friends is also subverted when Exim is
running in the test harness. The test code handles a few special names
directly; for all the others it uses DNS lookups, which are then handled as