$cf = "bin/cf -exact";
$cr = "\r";
$debug = 0;
+$force_continue = 0;
$force_update = 0;
+$log_failed_filename = "failed-summary.log";
$more = "less -XF";
$optargs = "";
$save_output = 0;
system("sudo /bin/rm -rf ./spool test-* ./dnszones/*")
if ($rc == 0 && !$save_output);
-system("sudo /bin/rm -rf ./eximdir/*");
+system("sudo /bin/rm -rf ./eximdir/*")
+ if (!$save_output);
print "\nYou were in test $test at the end there.\n\n" if defined $test;
exit $rc if ($rc >= 0);
s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
# GnuTLS have seen:
+ # TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
+ # TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128
# TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
# TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
#
# X=TLS1.1:RSA_AES_256_CBC_SHA1:256
# X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
# and as stand-alone cipher:
+ # ECDHE-RSA-AES256-SHA
# DHE-RSA-AES256-SHA256
# DHE-RSA-AES256-SHA
# picking latter as canonical simply because regex easier that way.
s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;
- s/TLS1.[012]:(DHE_)?RSA_AES_256_CBC_SHA(1|256):256/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
- s/\bDHE-RSA-AES256-SHA256\b/DHE-RSA-AES256-SHA/g;
+ s/TLS1.[012]:((EC)?DHE_)?RSA_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
+ s/\b(ECDHE-RSA-AES256-SHA|DHE-RSA-AES256-SHA256)\b/AES256-SHA/g;
+
+ # GnuTLS library error message changes
+ s/No certificate was found/The peer did not send any certificate/g;
+#(dodgy test?) s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
+ s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
+
+ # (this new one is a generic channel-read error, but the testsuite
+ # only hits it in one place)
+ s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): Error in the pull function\./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+
+ # (replace old with new, hoping that old only happens in one situation)
+ s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+ s/TLS error on connection from \[127.0.0.1\] \(recv\): A TLS packet with unexpected length was received./TLS error on connection from [127.0.0.1] (recv): The TLS connection was non-properly terminated./g;
+
+ # signature algorithm names
+ s/RSA-SHA1/RSA-SHA/;
# ======== Caller's login, uid, gid, home, gecos ========
# Arguments: [0] the prompt string
# [1] if there is a U in the prompt and $force_update is true
+# [2] if there is a C in the prompt and $force_continue is true
# Returns: nothing (it sets $_)
sub interact{
print $_[0];
if ($_[1]) { $_ = "u"; print "... update forced\n"; }
+ elsif ($_[2]) { $_ = "c"; print "... continue forced\n"; }
else { $_ = <T>; }
}
+##################################################
+# Subroutine to log in force_continue mode #
+##################################################
+
+# In force_continue mode, we just want a terse output to a statically
+# named logfile. If multiple files in same batch (stdout, stderr, etc)
+# all have mismatches, it will log multiple times.
+#
+# Arguments: [0] the logfile to append to
+# [1] the testno that failed
+# Returns: nothing
+
+
+
+sub log_failure {
+ my $logfile = shift();
+ my $testno = shift();
+ my $detail = shift() || '';
+ if ( open(my $fh, ">>", $logfile) ) {
+ print $fh "Test $testno $detail failed\n";
+ close $fh;
+ }
+}
+
+
##################################################
# Subroutine to compare one output file #
for (;;)
{
print "Continue, Show, or Quit? [Q] ";
- $_ = <T>;
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, $rf) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
last if (/^s$/);
}
print "\n";
for (;;)
{
- interact("Continue, Update & retry, Quit? [Q] ", $force_update);
+ interact("Continue, Update & retry, Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, $rsf) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
last if (/^u$/i);
}
print "\n";
for (;;)
{
- interact("Continue, Retry, Update & retry, Quit? [Q] ", $force_update);
+ interact("Continue, Retry, Update & retry, Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, $sf) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
return 1 if /^r$/i;
last if (/^u$/i);
for (;;)
{
- interact("Continue, Update & retry, or Quit? [Q] ", $force_update);
+ interact("Continue, Update & retry, or Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "missing email") if (/^c$/i && $force_continue);
last if /^c$/i;
# For update, we not only have to unlink the file, but we must also
for (;;)
{
- interact("Continue, Update, or Quit? [Q] ", $force_update);
+ interact("Continue, Update, or Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "missing msglog") if (/^c$/i && $force_continue);
last if /^c$/i;
if (/^u$/i)
{
{
if ($arg eq "-DEBUG") { $debug = 1; $cr = "\n"; next; }
if ($arg eq "-DIFF") { $cf = "diff -u"; next; }
+ if ($arg eq "-CONTINUE"){$force_continue = 1;
+ $more = "cat";
+ next; }
if ($arg eq "-UPDATE") { $force_update = 1; next; }
if ($arg eq "-NOIPV4") { $have_ipv4 = 0; next; }
if ($arg eq "-NOIPV6") { $have_ipv6 = 0; next; }
open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
print "\nPress RETURN to run the tests: ";
-$_ = <T>;
+$_ = $force_continue ? "c" : <T>;
print "\n";
$lasttestdir = "";
for (;;)
{
print "\nshow stdErr, show stdOut, Retry, Continue (without file comparison), or Quit? [Q] ";
- $_ = <T>;
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+ print "... continue forced\n" if $force_continue;
last if /^[rc]$/i;
if (/^e$/i)
{
for (;;)
{
print "\nShow server stdout, Retry, Continue, or Quit? [Q] ";
- $_ = <T>;
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+ print "... continue forced\n" if $force_continue;
last if /^[rc]$/i;
if (/^s$/i)
git://git.exim.org / users / heiko / exim.git / blobdiff