-/* $Cambridge: exim/src/src/acl.c,v 1.11 2005/01/04 10:00:42 ph10 Exp $ */
-
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2005 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
/* Code for handling Access Control Lists (ACLs) */
/* ACL verbs */
-static uschar *verbs[] =
- { US"accept", US"defer", US"deny", US"discard", US"drop", US"require",
- US"warn" };
-
-/* For each verb, the condition for which "message" is used */
+static uschar *verbs[] = {
+ [ACL_ACCEPT] = US"accept",
+ [ACL_DEFER] = US"defer",
+ [ACL_DENY] = US"deny",
+ [ACL_DISCARD] = US"discard",
+ [ACL_DROP] = US"drop",
+ [ACL_REQUIRE] = US"require",
+ [ACL_WARN] = US"warn"
+};
-static int msgcond[] = { FAIL, OK, OK, FAIL, OK, FAIL, OK };
+/* For each verb, the conditions for which "message" or "log_message" are used
+are held as a bitmap. This is to avoid expanding the strings unnecessarily. For
+"accept", the FAIL case is used only after "endpass", but that is selected in
+the code. */
+
+static int msgcond[] = {
+ [ACL_ACCEPT] = BIT(OK) | BIT(FAIL) | BIT(FAIL_DROP),
+ [ACL_DEFER] = BIT(OK),
+ [ACL_DENY] = BIT(OK),
+ [ACL_DISCARD] = BIT(OK) | BIT(FAIL) | BIT(FAIL_DROP),
+ [ACL_DROP] = BIT(OK),
+ [ACL_REQUIRE] = BIT(FAIL) | BIT(FAIL_DROP),
+ [ACL_WARN] = BIT(OK)
+ };
/* ACL condition and modifier codes - keep in step with the table that
-follows. */
+follows.
+down. */
-enum { ACLC_ACL, ACLC_AUTHENTICATED,
+enum { ACLC_ACL,
+ ACLC_ADD_HEADER,
+ ACLC_AUTHENTICATED,
#ifdef EXPERIMENTAL_BRIGHTMAIL
ACLC_BMI_OPTIN,
#endif
-ACLC_CONDITION, ACLC_CONTROL,
+ ACLC_CONDITION,
+ ACLC_CONTINUE,
+ ACLC_CONTROL,
+#ifdef EXPERIMENTAL_DCC
+ ACLC_DCC,
+#endif
#ifdef WITH_CONTENT_SCAN
ACLC_DECODE,
#endif
ACLC_DELAY,
-#ifdef WITH_OLD_DEMIME
- ACLC_DEMIME,
-#endif
- ACLC_DNSLISTS, ACLC_DOMAINS, ACLC_ENCRYPTED, ACLC_ENDPASS,
- ACLC_HOSTS, ACLC_LOCAL_PARTS, ACLC_LOG_MESSAGE, ACLC_LOGWRITE,
+#ifndef DISABLE_DKIM
+ ACLC_DKIM_SIGNER,
+ ACLC_DKIM_STATUS,
+#endif
+#ifdef SUPPORT_DMARC
+ ACLC_DMARC_STATUS,
+#endif
+ ACLC_DNSLISTS,
+ ACLC_DOMAINS,
+ ACLC_ENCRYPTED,
+ ACLC_ENDPASS,
+ ACLC_HOSTS,
+ ACLC_LOCAL_PARTS,
+ ACLC_LOG_MESSAGE,
+ ACLC_LOG_REJECT_TARGET,
+ ACLC_LOGWRITE,
#ifdef WITH_CONTENT_SCAN
ACLC_MALWARE,
#endif
#ifdef WITH_CONTENT_SCAN
ACLC_MIME_REGEX,
#endif
+ ACLC_QUEUE,
+ ACLC_RATELIMIT,
ACLC_RECIPIENTS,
#ifdef WITH_CONTENT_SCAN
ACLC_REGEX,
#endif
- ACLC_SENDER_DOMAINS, ACLC_SENDERS, ACLC_SET,
+ ACLC_REMOVE_HEADER,
+ ACLC_SENDER_DOMAINS,
+ ACLC_SENDERS,
+ ACLC_SET,
#ifdef WITH_CONTENT_SCAN
- ACLC_SPAM,
+ ACLC_SPAM,
#endif
-#ifdef EXPERIMENTAL_SPF
+#ifdef SUPPORT_SPF
ACLC_SPF,
+ ACLC_SPF_GUESS,
#endif
+ ACLC_UDPSEND,
ACLC_VERIFY };
-/* ACL conditions/modifiers: "delay", "control", "endpass", "message",
-"log_message", "logwrite", and "set" are modifiers that look like conditions
-but always return TRUE. They are used for their side effects. */
+/* ACL conditions/modifiers: "delay", "control", "continue", "endpass",
+"message", "log_message", "log_reject_target", "logwrite", "queue" and "set" are
+modifiers that look like conditions but always return TRUE. They are used for
+their side effects. */
-static uschar *conditions[] = { US"acl", US"authenticated",
-#ifdef EXPERIMENTAL_BRIGHTMAIL
- US"bmi_optin",
+typedef struct condition_def {
+ uschar *name;
+
+/* Flag to indicate the condition/modifier has a string expansion done
+at the outer level. In the other cases, expansion already occurs in the
+checking functions. */
+ BOOL expand_at_top:1;
+
+ BOOL is_modifier:1;
+
+/* Bit map vector of which conditions and modifiers are not allowed at certain
+times. For each condition and modifier, there's a bitmap of dis-allowed times.
+For some, it is easier to specify the negation of a small number of allowed
+times. */
+ unsigned forbids;
+
+} condition_def;
+
+static condition_def conditions[] = {
+ [ACLC_ACL] = { US"acl", FALSE, FALSE, 0 },
+
+ [ACLC_ADD_HEADER] = { US"add_header", TRUE, TRUE,
+ (unsigned int)
+ ~(ACL_BIT_MAIL | ACL_BIT_RCPT |
+ ACL_BIT_PREDATA | ACL_BIT_DATA |
+#ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
#endif
- US"condition",
- US"control",
-#ifdef WITH_CONTENT_SCAN
- US"decode",
+ ACL_BIT_MIME | ACL_BIT_NOTSMTP |
+ ACL_BIT_DKIM |
+ ACL_BIT_NOTSMTP_START),
+ },
+
+ [ACLC_AUTHENTICATED] = { US"authenticated", FALSE, FALSE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START |
+ ACL_BIT_CONNECT | ACL_BIT_HELO,
+ },
+#ifdef EXPERIMENTAL_BRIGHTMAIL
+ [ACLC_BMI_OPTIN] = { US"bmi_optin", TRUE, TRUE,
+ ACL_BIT_AUTH |
+ ACL_BIT_CONNECT | ACL_BIT_HELO |
+ ACL_BIT_DATA | ACL_BIT_MIME |
+# ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
+# endif
+ ACL_BIT_ETRN | ACL_BIT_EXPN |
+ ACL_BIT_MAILAUTH |
+ ACL_BIT_MAIL | ACL_BIT_STARTTLS |
+ ACL_BIT_VRFY | ACL_BIT_PREDATA |
+ ACL_BIT_NOTSMTP_START,
+ },
#endif
- US"delay",
-#ifdef WITH_OLD_DEMIME
- US"demime",
+ [ACLC_CONDITION] = { US"condition", TRUE, FALSE, 0 },
+ [ACLC_CONTINUE] = { US"continue", TRUE, TRUE, 0 },
+
+ /* Certain types of control are always allowed, so we let it through
+ always and check in the control processing itself. */
+ [ACLC_CONTROL] = { US"control", TRUE, TRUE, 0 },
+
+#ifdef EXPERIMENTAL_DCC
+ [ACLC_DCC] = { US"dcc", TRUE, FALSE,
+ (unsigned int)
+ ~(ACL_BIT_DATA |
+# ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
+# endif
+ ACL_BIT_NOTSMTP),
+ },
#endif
- US"dnslists", US"domains", US"encrypted",
- US"endpass", US"hosts", US"local_parts", US"log_message", US"logwrite",
#ifdef WITH_CONTENT_SCAN
- US"malware",
+ [ACLC_DECODE] = { US"decode", TRUE, FALSE, (unsigned int) ~ACL_BIT_MIME },
+
#endif
- US"message",
-#ifdef WITH_CONTENT_SCAN
- US"mime_regex",
+ [ACLC_DELAY] = { US"delay", TRUE, TRUE, ACL_BIT_NOTQUIT },
+#ifndef DISABLE_DKIM
+ [ACLC_DKIM_SIGNER] = { US"dkim_signers", TRUE, FALSE, (unsigned int) ~ACL_BIT_DKIM },
+ [ACLC_DKIM_STATUS] = { US"dkim_status", TRUE, FALSE, (unsigned int) ~ACL_BIT_DKIM },
#endif
- US"recipients",
-#ifdef WITH_CONTENT_SCAN
- US"regex",
+#ifdef SUPPORT_DMARC
+ [ACLC_DMARC_STATUS] = { US"dmarc_status", TRUE, FALSE, (unsigned int) ~ACL_BIT_DATA },
#endif
- US"sender_domains", US"senders", US"set",
-#ifdef WITH_CONTENT_SCAN
- US"spam",
+
+ /* Explicit key lookups can be made in non-smtp ACLs so pass
+ always and check in the verify processing itself. */
+ [ACLC_DNSLISTS] = { US"dnslists", TRUE, FALSE, 0 },
+
+ [ACLC_DOMAINS] = { US"domains", FALSE, FALSE,
+ (unsigned int)
+ ~(ACL_BIT_RCPT | ACL_BIT_VRFY
+#ifndef DISABLE_PRDR
+ |ACL_BIT_PRDR
#endif
-#ifdef EXPERIMENTAL_SPF
- US"spf",
+ ),
+ },
+ [ACLC_ENCRYPTED] = { US"encrypted", FALSE, FALSE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START |
+ ACL_BIT_HELO,
+ },
+
+ [ACLC_ENDPASS] = { US"endpass", TRUE, TRUE, 0 },
+
+ [ACLC_HOSTS] = { US"hosts", FALSE, FALSE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START,
+ },
+ [ACLC_LOCAL_PARTS] = { US"local_parts", FALSE, FALSE,
+ (unsigned int)
+ ~(ACL_BIT_RCPT | ACL_BIT_VRFY
+#ifndef DISABLE_PRDR
+ | ACL_BIT_PRDR
#endif
- US"verify" };
-
-/* ACL control names */
-
-static uschar *controls[] = { US"error", US"caseful_local_part",
- US"caselower_local_part", US"enforce_sync", US"no_enforce_sync", US"freeze",
- US"queue_only", US"submission", US"no_multiline"};
+ ),
+ },
-/* Flags to indicate for which conditions /modifiers a string expansion is done
-at the outer level. In the other cases, expansion already occurs in the
-checking functions. */
+ [ACLC_LOG_MESSAGE] = { US"log_message", TRUE, TRUE, 0 },
+ [ACLC_LOG_REJECT_TARGET] = { US"log_reject_target", TRUE, TRUE, 0 },
+ [ACLC_LOGWRITE] = { US"logwrite", TRUE, TRUE, 0 },
-static uschar cond_expand_at_top[] = {
- TRUE, /* acl */
- FALSE, /* authenticated */
-#ifdef EXPERIMENTAL_BRIGHTMAIL
- TRUE, /* bmi_optin */
-#endif
- TRUE, /* condition */
- TRUE, /* control */
#ifdef WITH_CONTENT_SCAN
- TRUE, /* decode */
-#endif
- TRUE, /* delay */
-#ifdef WITH_OLD_DEMIME
- TRUE, /* demime */
+ [ACLC_MALWARE] = { US"malware", TRUE, FALSE,
+ (unsigned int)
+ ~(ACL_BIT_DATA |
+# ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
+# endif
+ ACL_BIT_NOTSMTP),
+ },
#endif
- TRUE, /* dnslists */
- FALSE, /* domains */
- FALSE, /* encrypted */
- TRUE, /* endpass */
- FALSE, /* hosts */
- FALSE, /* local_parts */
- TRUE, /* log_message */
- TRUE, /* logwrite */
+
+ [ACLC_MESSAGE] = { US"message", TRUE, TRUE, 0 },
#ifdef WITH_CONTENT_SCAN
- TRUE, /* malware */
+ [ACLC_MIME_REGEX] = { US"mime_regex", TRUE, FALSE, (unsigned int) ~ACL_BIT_MIME },
#endif
- TRUE, /* message */
-#ifdef WITH_CONTENT_SCAN
- TRUE, /* mime_regex */
+
+ [ACLC_QUEUE] = { US"queue", TRUE, TRUE,
+ ACL_BIT_NOTSMTP |
+#ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
#endif
- FALSE, /* recipients */
+ ACL_BIT_DATA,
+ },
+
+ [ACLC_RATELIMIT] = { US"ratelimit", TRUE, FALSE, 0 },
+ [ACLC_RECIPIENTS] = { US"recipients", FALSE, FALSE, (unsigned int) ~ACL_BIT_RCPT },
+
#ifdef WITH_CONTENT_SCAN
- TRUE, /* regex */
+ [ACLC_REGEX] = { US"regex", TRUE, FALSE,
+ (unsigned int)
+ ~(ACL_BIT_DATA |
+# ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
+# endif
+ ACL_BIT_NOTSMTP |
+ ACL_BIT_MIME),
+ },
+
#endif
- FALSE, /* sender_domains */
- FALSE, /* senders */
- TRUE, /* set */
+ [ACLC_REMOVE_HEADER] = { US"remove_header", TRUE, TRUE,
+ (unsigned int)
+ ~(ACL_BIT_MAIL|ACL_BIT_RCPT |
+ ACL_BIT_PREDATA | ACL_BIT_DATA |
+#ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
+#endif
+ ACL_BIT_MIME | ACL_BIT_NOTSMTP |
+ ACL_BIT_NOTSMTP_START),
+ },
+ [ACLC_SENDER_DOMAINS] = { US"sender_domains", FALSE, FALSE,
+ ACL_BIT_AUTH | ACL_BIT_CONNECT |
+ ACL_BIT_HELO |
+ ACL_BIT_MAILAUTH | ACL_BIT_QUIT |
+ ACL_BIT_ETRN | ACL_BIT_EXPN |
+ ACL_BIT_STARTTLS | ACL_BIT_VRFY,
+ },
+ [ACLC_SENDERS] = { US"senders", FALSE, FALSE,
+ ACL_BIT_AUTH | ACL_BIT_CONNECT |
+ ACL_BIT_HELO |
+ ACL_BIT_MAILAUTH | ACL_BIT_QUIT |
+ ACL_BIT_ETRN | ACL_BIT_EXPN |
+ ACL_BIT_STARTTLS | ACL_BIT_VRFY,
+ },
+
+ [ACLC_SET] = { US"set", TRUE, TRUE, 0 },
+
#ifdef WITH_CONTENT_SCAN
- TRUE, /* spam */
+ [ACLC_SPAM] = { US"spam", TRUE, FALSE,
+ (unsigned int) ~(ACL_BIT_DATA |
+# ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
+# endif
+ ACL_BIT_NOTSMTP),
+ },
#endif
-#ifdef EXPERIMENTAL_SPF
- TRUE, /* spf */
+#ifdef SUPPORT_SPF
+ [ACLC_SPF] = { US"spf", TRUE, FALSE,
+ ACL_BIT_AUTH | ACL_BIT_CONNECT |
+ ACL_BIT_HELO | ACL_BIT_MAILAUTH |
+ ACL_BIT_ETRN | ACL_BIT_EXPN |
+ ACL_BIT_STARTTLS | ACL_BIT_VRFY |
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START,
+ },
+ [ACLC_SPF_GUESS] = { US"spf_guess", TRUE, FALSE,
+ ACL_BIT_AUTH | ACL_BIT_CONNECT |
+ ACL_BIT_HELO | ACL_BIT_MAILAUTH |
+ ACL_BIT_ETRN | ACL_BIT_EXPN |
+ ACL_BIT_STARTTLS | ACL_BIT_VRFY |
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START,
+ },
#endif
- TRUE /* verify */
+ [ACLC_UDPSEND] = { US"udpsend", TRUE, TRUE, 0 },
+
+ /* Certain types of verify are always allowed, so we let it through
+ always and check in the verify function itself */
+ [ACLC_VERIFY] = { US"verify", TRUE, FALSE, 0 },
};
-/* Flags to identify the modifiers */
-static uschar cond_modifiers[] = {
- FALSE, /* acl */
- FALSE, /* authenticated */
+
+/* Return values from decode_control(); used as index so keep in step
+with the controls_list table that follows! */
+
+enum {
+ CONTROL_AUTH_UNADVERTISED,
#ifdef EXPERIMENTAL_BRIGHTMAIL
- TRUE, /* bmi_optin */
-#endif
- FALSE, /* condition */
- TRUE, /* control */
-#ifdef WITH_CONTENT_SCAN
- FALSE, /* decode */
-#endif
- TRUE, /* delay */
-#ifdef WITH_OLD_DEMIME
- FALSE, /* demime */
-#endif
- FALSE, /* dnslists */
- FALSE, /* domains */
- FALSE, /* encrypted */
- TRUE, /* endpass */
- FALSE, /* hosts */
- FALSE, /* local_parts */
- TRUE, /* log_message */
- TRUE, /* logwrite */
-#ifdef WITH_CONTENT_SCAN
- FALSE, /* malware */
+ CONTROL_BMI_RUN,
#endif
- TRUE, /* message */
-#ifdef WITH_CONTENT_SCAN
- FALSE, /* mime_regex */
+ CONTROL_CASEFUL_LOCAL_PART,
+ CONTROL_CASELOWER_LOCAL_PART,
+ CONTROL_CUTTHROUGH_DELIVERY,
+ CONTROL_DEBUG,
+#ifndef DISABLE_DKIM
+ CONTROL_DKIM_VERIFY,
#endif
- FALSE, /* recipients */
-#ifdef WITH_CONTENT_SCAN
- FALSE, /* regex */
+#ifdef SUPPORT_DMARC
+ CONTROL_DMARC_VERIFY,
+ CONTROL_DMARC_FORENSIC,
#endif
- FALSE, /* sender_domains */
- FALSE, /* senders */
- TRUE, /* set */
+ CONTROL_DSCP,
+ CONTROL_ENFORCE_SYNC,
+ CONTROL_ERROR, /* pseudo-value for decode errors */
+ CONTROL_FAKEDEFER,
+ CONTROL_FAKEREJECT,
+ CONTROL_FREEZE,
+
+ CONTROL_NO_CALLOUT_FLUSH,
+ CONTROL_NO_DELAY_FLUSH,
+ CONTROL_NO_ENFORCE_SYNC,
#ifdef WITH_CONTENT_SCAN
- FALSE, /* spam */
+ CONTROL_NO_MBOX_UNSPOOL,
#endif
-#ifdef EXPERIMENTAL_SPF
- FALSE, /* spf */
+ CONTROL_NO_MULTILINE,
+ CONTROL_NO_PIPELINING,
+
+ CONTROL_QUEUE_ONLY,
+ CONTROL_SUBMISSION,
+ CONTROL_SUPPRESS_LOCAL_FIXUPS,
+#ifdef SUPPORT_I18N
+ CONTROL_UTF8_DOWNCONVERT,
#endif
- FALSE /* verify */
};
-/* Bit map vector of which conditions are not allowed at certain times. For
-each condition, there's a bitmap of dis-allowed times. */
-static unsigned int cond_forbids[] = {
- 0, /* acl */
- (1<<ACL_WHERE_NOTSMTP)|(1<<ACL_WHERE_CONNECT)| /* authenticated */
- (1<<ACL_WHERE_HELO),
-
+
+/* Structure listing various control arguments, with their characteristics.
+For each control, there's a bitmap of dis-allowed times. For some, it is easier
+to specify the negation of a small number of allowed times. */
+
+typedef struct control_def {
+ uschar *name;
+ BOOL has_option; /* Has /option(s) following */
+ unsigned forbids; /* bitmap of dis-allowed times */
+} control_def;
+
+static control_def controls_list[] = {
+ /* name has_option forbids */
+[CONTROL_AUTH_UNADVERTISED] =
+ { US"allow_auth_unadvertised", FALSE,
+ (unsigned)
+ ~(ACL_BIT_CONNECT | ACL_BIT_HELO)
+ },
#ifdef EXPERIMENTAL_BRIGHTMAIL
- (1<<ACL_WHERE_AUTH)| /* bmi_optin */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_MIME)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_PREDATA),
+[CONTROL_BMI_RUN] =
+ { US"bmi_run", FALSE, 0 },
#endif
-
- 0, /* condition */
-
- /* Certain types of control are always allowed, so we let it through
- always and check in the control processing itself */
-
- 0, /* control */
-
-#ifdef WITH_CONTENT_SCAN
- (1<<ACL_WHERE_AUTH)| /* decode */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_RCPT),
+[CONTROL_CASEFUL_LOCAL_PART] =
+ { US"caseful_local_part", FALSE, (unsigned) ~ACL_BIT_RCPT },
+[CONTROL_CASELOWER_LOCAL_PART] =
+ { US"caselower_local_part", FALSE, (unsigned) ~ACL_BIT_RCPT },
+[CONTROL_CUTTHROUGH_DELIVERY] =
+ { US"cutthrough_delivery", TRUE, 0 },
+[CONTROL_DEBUG] =
+ { US"debug", TRUE, 0 },
+
+#ifndef DISABLE_DKIM
+[CONTROL_DKIM_VERIFY] =
+ { US"dkim_disable_verify", FALSE,
+ ACL_BIT_DATA | ACL_BIT_NOTSMTP |
+# ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
+# endif
+ ACL_BIT_NOTSMTP_START
+ },
#endif
- 0, /* delay */
-
-#ifdef WITH_OLD_DEMIME
- (1<<ACL_WHERE_AUTH)| /* demime */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_MIME),
+#ifdef SUPPORT_DMARC
+[CONTROL_DMARC_VERIFY] =
+ { US"dmarc_disable_verify", FALSE,
+ ACL_BIT_DATA | ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
+ },
+[CONTROL_DMARC_FORENSIC] =
+ { US"dmarc_enable_forensic", FALSE,
+ ACL_BIT_DATA | ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
+ },
#endif
+
+[CONTROL_DSCP] =
+ { US"dscp", TRUE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START | ACL_BIT_NOTQUIT
+ },
+[CONTROL_ENFORCE_SYNC] =
+ { US"enforce_sync", FALSE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
+ },
+
+ /* Pseudo-value for decode errors */
+[CONTROL_ERROR] =
+ { US"error", FALSE, 0 },
+
+[CONTROL_FAKEDEFER] =
+ { US"fakedefer", TRUE,
+ (unsigned)
+ ~(ACL_BIT_MAIL | ACL_BIT_RCPT |
+ ACL_BIT_PREDATA | ACL_BIT_DATA |
+#ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
+#endif
+ ACL_BIT_MIME)
+ },
+[CONTROL_FAKEREJECT] =
+ { US"fakereject", TRUE,
+ (unsigned)
+ ~(ACL_BIT_MAIL | ACL_BIT_RCPT |
+ ACL_BIT_PREDATA | ACL_BIT_DATA |
+#ifndef DISABLE_PRDR
+ ACL_BIT_PRDR |
+#endif
+ ACL_BIT_MIME)
+ },
+[CONTROL_FREEZE] =
+ { US"freeze", TRUE,
+ (unsigned)
+ ~(ACL_BIT_MAIL | ACL_BIT_RCPT |
+ ACL_BIT_PREDATA | ACL_BIT_DATA |
+ // ACL_BIT_PRDR| /* Not allow one user to freeze for all */
+ ACL_BIT_NOTSMTP | ACL_BIT_MIME)
+ },
+
+[CONTROL_NO_CALLOUT_FLUSH] =
+ { US"no_callout_flush", FALSE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
+ },
+[CONTROL_NO_DELAY_FLUSH] =
+ { US"no_delay_flush", FALSE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
+ },
- (1<<ACL_WHERE_NOTSMTP), /* dnslists */
-
- (1<<ACL_WHERE_NOTSMTP)|(1<<ACL_WHERE_AUTH)| /* domains */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY),
-
- (1<<ACL_WHERE_NOTSMTP)|(1<<ACL_WHERE_CONNECT)| /* encrypted */
- (1<<ACL_WHERE_HELO),
- 0, /* endpass */
- (1<<ACL_WHERE_NOTSMTP), /* hosts */
-
- (1<<ACL_WHERE_NOTSMTP)|(1<<ACL_WHERE_AUTH)| /* local_parts */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY),
-
- 0, /* log_message */
- 0, /* logwrite */
-
+[CONTROL_NO_ENFORCE_SYNC] =
+ { US"no_enforce_sync", FALSE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
+ },
#ifdef WITH_CONTENT_SCAN
- (1<<ACL_WHERE_AUTH)| /* malware */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_MIME),
+[CONTROL_NO_MBOX_UNSPOOL] =
+ { US"no_mbox_unspool", FALSE,
+ (unsigned)
+ ~(ACL_BIT_MAIL | ACL_BIT_RCPT |
+ ACL_BIT_PREDATA | ACL_BIT_DATA |
+ // ACL_BIT_PRDR| /* Not allow one user to freeze for all */
+ ACL_BIT_MIME)
+ },
#endif
-
- 0, /* message */
-
-#ifdef WITH_CONTENT_SCAN
- (1<<ACL_WHERE_AUTH)| /* mime_regex */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_RCPT),
+[CONTROL_NO_MULTILINE] =
+ { US"no_multiline_responses", FALSE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
+ },
+[CONTROL_NO_PIPELINING] =
+ { US"no_pipelining", FALSE,
+ ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
+ },
+
+[CONTROL_QUEUE_ONLY] =
+ { US"queue_only", FALSE,
+ (unsigned)
+ ~(ACL_BIT_MAIL | ACL_BIT_RCPT |
+ ACL_BIT_PREDATA | ACL_BIT_DATA |
+ // ACL_BIT_PRDR| /* Not allow one user to freeze for all */
+ ACL_BIT_NOTSMTP | ACL_BIT_MIME)
+ },
+
+
+[CONTROL_SUBMISSION] =
+ { US"submission", TRUE,
+ (unsigned)
+ ~(ACL_BIT_MAIL | ACL_BIT_RCPT | ACL_BIT_PREDATA)
+ },
+[CONTROL_SUPPRESS_LOCAL_FIXUPS] =
+ { US"suppress_local_fixups", FALSE,
+ (unsigned)
+ ~(ACL_BIT_MAIL | ACL_BIT_RCPT | ACL_BIT_PREDATA |
+ ACL_BIT_NOTSMTP_START)
+ },
+#ifdef SUPPORT_I18N
+[CONTROL_UTF8_DOWNCONVERT] =
+ { US"utf8_downconvert", TRUE, (unsigned) ~(ACL_BIT_RCPT | ACL_BIT_VRFY)
+ }
#endif
+};
- (1<<ACL_WHERE_NOTSMTP)|(1<<ACL_WHERE_AUTH)| /* recipients */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY),
+/* Support data structures for Client SMTP Authorization. acl_verify_csa()
+caches its result in a tree to avoid repeated DNS queries. The result is an
+integer code which is used as an index into the following tables of
+explanatory strings and verification return codes. */
+
+static tree_node *csa_cache = NULL;
+
+enum { CSA_UNKNOWN, CSA_OK, CSA_DEFER_SRV, CSA_DEFER_ADDR,
+ CSA_FAIL_EXPLICIT, CSA_FAIL_DOMAIN, CSA_FAIL_NOADDR, CSA_FAIL_MISMATCH };
+
+/* The acl_verify_csa() return code is translated into an acl_verify() return
+code using the following table. It is OK unless the client is definitely not
+authorized. This is because CSA is supposed to be optional for sending sites,
+so recipients should not be too strict about checking it - especially because
+DNS problems are quite likely to occur. It's possible to use $csa_status in
+further ACL conditions to distinguish ok, unknown, and defer if required, but
+the aim is to make the usual configuration simple. */
+
+static int csa_return_code[] = {
+ [CSA_UNKNOWN] = OK,
+ [CSA_OK] = OK,
+ [CSA_DEFER_SRV] = OK,
+ [CSA_DEFER_ADDR] = OK,
+ [CSA_FAIL_EXPLICIT] = FAIL,
+ [CSA_FAIL_DOMAIN] = FAIL,
+ [CSA_FAIL_NOADDR] = FAIL,
+ [CSA_FAIL_MISMATCH] = FAIL
+};
-#ifdef WITH_CONTENT_SCAN
- (1<<ACL_WHERE_AUTH)| /* regex */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_MIME),
-#endif
+static uschar *csa_status_string[] = {
+ [CSA_UNKNOWN] = US"unknown",
+ [CSA_OK] = US"ok",
+ [CSA_DEFER_SRV] = US"defer",
+ [CSA_DEFER_ADDR] = US"defer",
+ [CSA_FAIL_EXPLICIT] = US"fail",
+ [CSA_FAIL_DOMAIN] = US"fail",
+ [CSA_FAIL_NOADDR] = US"fail",
+ [CSA_FAIL_MISMATCH] = US"fail"
+};
- (1<<ACL_WHERE_AUTH)|(1<<ACL_WHERE_CONNECT)| /* sender_domains */
- (1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_STARTTLS)|(1<<ACL_WHERE_VRFY),
+static uschar *csa_reason_string[] = {
+ [CSA_UNKNOWN] = US"unknown",
+ [CSA_OK] = US"ok",
+ [CSA_DEFER_SRV] = US"deferred (SRV lookup failed)",
+ [CSA_DEFER_ADDR] = US"deferred (target address lookup failed)",
+ [CSA_FAIL_EXPLICIT] = US"failed (explicit authorization required)",
+ [CSA_FAIL_DOMAIN] = US"failed (host name not authorized)",
+ [CSA_FAIL_NOADDR] = US"failed (no authorized addresses)",
+ [CSA_FAIL_MISMATCH] = US"failed (client address mismatch)"
+};
- (1<<ACL_WHERE_AUTH)|(1<<ACL_WHERE_CONNECT)| /* senders */
- (1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_STARTTLS)|(1<<ACL_WHERE_VRFY),
+/* Options for the ratelimit condition. Note that there are two variants of
+the per_rcpt option, depending on the ACL that is used to measure the rate.
+However any ACL must be able to look up per_rcpt rates in /noupdate mode,
+so the two variants must have the same internal representation as well as
+the same configuration string. */
- 0, /* set */
+enum {
+ RATE_PER_WHAT, RATE_PER_CLASH, RATE_PER_ADDR, RATE_PER_BYTE, RATE_PER_CMD,
+ RATE_PER_CONN, RATE_PER_MAIL, RATE_PER_RCPT, RATE_PER_ALLRCPTS
+};
-#ifdef WITH_CONTENT_SCAN
- (1<<ACL_WHERE_AUTH)| /* spam */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_MIME),
-#endif
+#define RATE_SET(var,new) \
+ (((var) == RATE_PER_WHAT) ? ((var) = RATE_##new) : ((var) = RATE_PER_CLASH))
+
+static uschar *ratelimit_option_string[] = {
+ [RATE_PER_WHAT] = US"?",
+ [RATE_PER_CLASH] = US"!",
+ [RATE_PER_ADDR] = US"per_addr",
+ [RATE_PER_BYTE] = US"per_byte",
+ [RATE_PER_CMD] = US"per_cmd",
+ [RATE_PER_CONN] = US"per_conn",
+ [RATE_PER_MAIL] = US"per_mail",
+ [RATE_PER_RCPT] = US"per_rcpt",
+ [RATE_PER_ALLRCPTS] = US"per_rcpt"
+};
-#ifdef EXPERIMENTAL_SPF
- (1<<ACL_WHERE_AUTH)|(1<<ACL_WHERE_CONNECT)| /* spf */
- (1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_MAILAUTH)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_STARTTLS)|(1<<ACL_WHERE_VRFY),
-#endif
+/* Enable recursion between acl_check_internal() and acl_check_condition() */
- /* Certain types of verify are always allowed, so we let it through
- always and check in the verify function itself */
+static int acl_check_wargs(int, address_item *, const uschar *, uschar **,
+ uschar **);
- 0 /* verify */
-};
+/*************************************************
+* Find control in list *
+*************************************************/
-/* Return values from decode_control() */
+/* The lists are always in order, so binary chop can be used.
-enum {
-#ifdef EXPERIMENTAL_BRIGHTMAIL
- CONTROL_BMI_RUN,
-#endif
- CONTROL_ERROR, CONTROL_CASEFUL_LOCAL_PART, CONTROL_CASELOWER_LOCAL_PART,
- CONTROL_ENFORCE_SYNC, CONTROL_NO_ENFORCE_SYNC, CONTROL_FREEZE,
- CONTROL_QUEUE_ONLY, CONTROL_SUBMISSION,
-#ifdef WITH_CONTENT_SCAN
- CONTROL_NO_MBOX_UNSPOOL,
-#endif
- CONTROL_FAKEREJECT, CONTROL_NO_MULTILINE };
+Arguments:
+ name the control name to search for
+ ol the first entry in the control list
+ last one more than the offset of the last entry in the control list
-/* Bit map vector of which controls are not allowed at certain times. For
-each control, there's a bitmap of dis-allowed times. For some, it is easier to
-specify the negation of a small number of allowed times. */
+Returns: index of a control entry, or -1 if not found
+*/
-static unsigned int control_forbids[] = {
-#ifdef EXPERIMENTAL_BRIGHTMAIL
- 0, /* bmi_run */
-#endif
- 0, /* error */
- ~(1<<ACL_WHERE_RCPT), /* caseful_local_part */
- ~(1<<ACL_WHERE_RCPT), /* caselower_local_part */
- (1<<ACL_WHERE_NOTSMTP), /* enforce_sync */
- (1<<ACL_WHERE_NOTSMTP), /* no_enforce_sync */
-
- ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* freeze */
- (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
- (1<<ACL_WHERE_NOTSMTP)),
-
- ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* queue_only */
- (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
- (1<<ACL_WHERE_NOTSMTP)),
-
- ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* submission */
- (1<<ACL_WHERE_PREDATA)),
+static int
+find_control(const uschar * name, control_def * ol, int last)
+{
+for (int first = 0; last > first; )
+ {
+ int middle = (first + last)/2;
+ uschar * s = ol[middle].name;
+ int c = Ustrncmp(name, s, Ustrlen(s));
+ if (c == 0) return middle;
+ else if (c > 0) first = middle + 1;
+ else last = middle;
+ }
+return -1;
+}
-#ifdef WITH_CONTENT_SCAN
- (1<<ACL_WHERE_NOTSMTP), /* no_mbox_unspool */
-#endif
- (1<<ACL_WHERE_NOTSMTP), /* fakereject */
- (1<<ACL_WHERE_NOTSMTP) /* no_multiline */
-};
-/* Structure listing various control arguments, with their characteristics. */
+/*************************************************
+* Pick out condition from list *
+*************************************************/
-typedef struct control_def {
- uschar *name;
- int value; /* CONTROL_xxx value */
- BOOL has_option; /* Has /option(s) following */
-} control_def;
+/* Use a binary chop method
-static control_def controls_list[] = {
-#ifdef EXPERIMENTAL_BRIGHTMAIL
- { US"bmi_run", CONTROL_BMI_RUN, FALSE},
-#endif
- { US"caseful_local_part", CONTROL_CASEFUL_LOCAL_PART, FALSE},
- { US"caselower_local_part", CONTROL_CASELOWER_LOCAL_PART, FALSE},
- { US"enforce_sync", CONTROL_ENFORCE_SYNC, FALSE},
- { US"freeze", CONTROL_FREEZE, FALSE},
- { US"no_enforce_sync", CONTROL_NO_ENFORCE_SYNC, FALSE},
- { US"no_multiline_responses", CONTROL_NO_MULTILINE, FALSE},
- { US"queue_only", CONTROL_QUEUE_ONLY, FALSE},
-#ifdef WITH_CONTENT_SCAN
- { US"no_mbox_unspool", CONTROL_NO_MBOX_UNSPOOL, FALSE},
-#endif
- { US"fakereject", CONTROL_FAKEREJECT, TRUE},
- { US"submission", CONTROL_SUBMISSION, TRUE}
- };
+Arguments:
+ name name to find
+ list list of conditions
+ end size of list
-/* Enable recursion between acl_check_internal() and acl_check_condition() */
+Returns: offset in list, or -1 if not found
+*/
-static int acl_check_internal(int, address_item *, uschar *, int, uschar **,
- uschar **);
+static int
+acl_checkcondition(uschar * name, condition_def * list, int end)
+{
+for (int start = 0; start < end; )
+ {
+ int mid = (start + end)/2;
+ int c = Ustrcmp(name, list[mid].name);
+ if (c == 0) return mid;
+ if (c < 0) end = mid;
+ else start = mid + 1;
+ }
+return -1;
+}
/*************************************************
static int
acl_checkname(uschar *name, uschar **list, int end)
{
-int start = 0;
-
-while (start < end)
+for (int start = 0; start < end; )
{
int mid = (start + end)/2;
int c = Ustrcmp(name, list[mid]);
acl_block *this = NULL;
acl_condition_block *cond;
acl_condition_block **condp = NULL;
-uschar *s;
+uschar * s;
*error = NULL;
s++;
}
- /* Read the name of a verb or a condition, or the start of a new ACL */
+ /* Read the name of a verb or a condition, or the start of a new ACL, which
+ can be started by a name, or by a macro definition. */
s = readconf_readname(name, sizeof(name), s);
- if (*s == ':')
- {
- if (negated || name[0] == 0)
- {
- *error = string_sprintf("malformed ACL name in \"%s\"", saveline);
- return NULL;
- }
- break;
- }
+ if (*s == ':' || (isupper(name[0]) && *s == '=')) return yield;
/* If a verb is unrecognized, it may be another condition or modifier that
continues the previous verb. */
- v = acl_checkname(name, verbs, sizeof(verbs)/sizeof(char *));
- if (v < 0)
+ if ((v = acl_checkname(name, verbs, nelem(verbs))) < 0)
{
- if (this == NULL)
+ if (!this)
{
- *error = string_sprintf("unknown ACL verb in \"%s\"", saveline);
+ *error = string_sprintf("unknown ACL verb \"%s\" in \"%s\"", name,
+ saveline);
return NULL;
}
}
*error = string_sprintf("malformed ACL line \"%s\"", saveline);
return NULL;
}
- this = store_get(sizeof(acl_block));
+ this = store_get(sizeof(acl_block), FALSE);
*lastp = this;
lastp = &(this->next);
this->next = NULL;
- this->verb = v;
this->condition = NULL;
+ this->verb = v;
+ this->srcline = config_lineno; /* for debug output */
+ this->srcfile = config_filename; /**/
condp = &(this->condition);
if (*s == 0) continue; /* No condition on this line */
if (*s == '!')
/* Handle a condition or modifier. */
- c = acl_checkname(name, conditions, sizeof(conditions)/sizeof(char *));
- if (c < 0)
+ if ((c = acl_checkcondition(name, conditions, nelem(conditions))) < 0)
{
*error = string_sprintf("unknown ACL condition/modifier in \"%s\"",
saveline);
/* The modifiers may not be negated */
- if (negated && cond_modifiers[c])
+ if (negated && conditions[c].is_modifier)
{
*error = string_sprintf("ACL error: negation is not allowed with "
- "\"%s\"", conditions[c]);
+ "\"%s\"", conditions[c].name);
return NULL;
}
this->verb != ACL_DISCARD)
{
*error = string_sprintf("ACL error: \"%s\" is not allowed with \"%s\"",
- conditions[c], verbs[this->verb]);
+ conditions[c].name, verbs[this->verb]);
return NULL;
}
- cond = store_get(sizeof(acl_condition_block));
+ cond = store_get(sizeof(acl_condition_block), FALSE);
cond->next = NULL;
cond->type = c;
cond->u.negated = negated;
/* The "set" modifier is different in that its argument is "name=value"
rather than just a value, and we can check the validity of the name, which
- gives us a variable number to insert into the data block. */
+ gives us a variable name to insert into the data block. The original ACL
+ variable names were acl_c0 ... acl_c9 and acl_m0 ... acl_m9. This was
+ extended to 20 of each type, but after that people successfully argued for
+ arbitrary names. In the new scheme, the names must start with acl_c or acl_m.
+ After that, we allow alphanumerics and underscores, but the first character
+ after c or m must be a digit or an underscore. This retains backwards
+ compatibility. */
if (c == ACLC_SET)
+#ifndef DISABLE_DKIM
+ if ( Ustrncmp(s, "dkim_verify_status", 18) == 0
+ || Ustrncmp(s, "dkim_verify_reason", 18) == 0)
+ {
+ uschar * endptr = s+18;
+
+ if (isalnum(*endptr))
+ {
+ *error = string_sprintf("invalid variable name after \"set\" in ACL "
+ "modifier \"set %s\" "
+ "(only \"dkim_verify_status\" or \"dkim_verify_reason\" permitted)",
+ s);
+ return NULL;
+ }
+ cond->u.varname = string_copyn(s, 18);
+ s = endptr;
+ while (isspace(*s)) s++;
+ }
+ else
+#endif
{
- if (Ustrncmp(s, "acl_", 4) != 0 || (s[4] != 'c' && s[4] != 'm') ||
- !isdigit(s[5]) || (!isspace(s[6]) && s[6] != '='))
+ uschar *endptr;
+
+ if (Ustrncmp(s, "acl_c", 5) != 0 && Ustrncmp(s, "acl_m", 5) != 0)
+ {
+ *error = string_sprintf("invalid variable name after \"set\" in ACL "
+ "modifier \"set %s\" (must start \"acl_c\" or \"acl_m\")", s);
+ return NULL;
+ }
+
+ endptr = s + 5;
+ if (!isdigit(*endptr) && *endptr != '_')
{
- *error = string_sprintf("unrecognized name after \"set\" in ACL "
- "modifier \"set %s\"", s);
+ *error = string_sprintf("invalid variable name after \"set\" in ACL "
+ "modifier \"set %s\" (digit or underscore must follow acl_c or acl_m)",
+ s);
return NULL;
}
- cond->u.varnumber = s[5] - '0';
- if (s[4] == 'm') cond->u.varnumber += ACL_C_MAX;
- s += 6;
+ while (*endptr && *endptr != '=' && !isspace(*endptr))
+ {
+ if (!isalnum(*endptr) && *endptr != '_')
+ {
+ *error = string_sprintf("invalid character \"%c\" in variable name "
+ "in ACL modifier \"set %s\"", *endptr, s);
+ return NULL;
+ }
+ endptr++;
+ }
+
+ cond->u.varname = string_copyn(s + 4, endptr - s - 4);
+ s = endptr;
while (isspace(*s)) s++;
}
if (*s++ != '=')
{
*error = string_sprintf("\"=\" missing after ACL \"%s\" %s", name,
- cond_modifiers[c]? US"modifier" : US"condition");
+ conditions[c].is_modifier ? US"modifier" : US"condition");
return NULL;
}
while (isspace(*s)) s++;
+/*************************************************
+* Set up added header line(s) *
+*************************************************/
+
+/* This function is called by the add_header modifier, and also from acl_warn()
+to implement the now-deprecated way of adding header lines using "message" on a
+"warn" verb. The argument is treated as a sequence of header lines which are
+added to a chain, provided there isn't an identical one already there.
+
+Argument: string of header lines
+Returns: nothing
+*/
+
+static void
+setup_header(const uschar *hstring)
+{
+const uschar *p, *q;
+int hlen = Ustrlen(hstring);
+
+/* Ignore any leading newlines */
+while (*hstring == '\n') hstring++, hlen--;
+
+/* An empty string does nothing; ensure exactly one final newline. */
+if (hlen <= 0) return;
+if (hstring[--hlen] != '\n') /* no newline */
+ q = string_sprintf("%s\n", hstring);
+else if (hstring[hlen-1] == '\n') /* double newline */
+ {
+ uschar * s = string_copy(hstring);
+ while(s[--hlen] == '\n')
+ s[hlen+1] = '\0';
+ q = s;
+ }
+else
+ q = hstring;
+
+/* Loop for multiple header lines, taking care about continuations */
+
+for (p = q; *p; p = q)
+ {
+ const uschar *s;
+ uschar * hdr;
+ int newtype = htype_add_bot;
+ header_line **hptr = &acl_added_headers;
+
+ /* Find next header line within the string */
+
+ for (;;)
+ {
+ q = Ustrchr(q, '\n'); /* we know there was a newline */
+ if (*++q != ' ' && *q != '\t') break;
+ }
+
+ /* If the line starts with a colon, interpret the instruction for where to
+ add it. This temporarily sets up a new type. */
+
+ if (*p == ':')
+ {
+ if (strncmpic(p, US":after_received:", 16) == 0)
+ {
+ newtype = htype_add_rec;
+ p += 16;
+ }
+ else if (strncmpic(p, US":at_start_rfc:", 14) == 0)
+ {
+ newtype = htype_add_rfc;
+ p += 14;
+ }
+ else if (strncmpic(p, US":at_start:", 10) == 0)
+ {
+ newtype = htype_add_top;
+ p += 10;
+ }
+ else if (strncmpic(p, US":at_end:", 8) == 0)
+ {
+ newtype = htype_add_bot;
+ p += 8;
+ }
+ while (*p == ' ' || *p == '\t') p++;
+ }
+
+ /* See if this line starts with a header name, and if not, add X-ACL-Warn:
+ to the front of it. */
+
+ for (s = p; s < q - 1; s++)
+ if (*s == ':' || !isgraph(*s)) break;
+
+ hdr = string_sprintf("%s%.*s", *s == ':' ? "" : "X-ACL-Warn: ", (int) (q - p), p);
+ hlen = Ustrlen(hdr);
+
+ /* See if this line has already been added */
+
+ while (*hptr)
+ {
+ if (Ustrncmp((*hptr)->text, hdr, hlen) == 0) break;
+ hptr = &(*hptr)->next;
+ }
+
+ /* Add if not previously present */
+
+ if (!*hptr)
+ {
+ /* The header_line struct itself is not tainted, though it points to
+ tainted data. */
+ header_line *h = store_get(sizeof(header_line), FALSE);
+ h->text = hdr;
+ h->next = NULL;
+ h->type = newtype;
+ h->slen = hlen;
+ *hptr = h;
+ hptr = &h->next;
+ }
+ }
+}
+
+
+
+/*************************************************
+* List the added header lines *
+*************************************************/
+uschar *
+fn_hdrs_added(void)
+{
+gstring * g = NULL;
+
+for (header_line * h = acl_added_headers; h; h = h->next)
+ {
+ int i = h->slen;
+ if (h->text[i-1] == '\n') i--;
+ g = string_append_listele_n(g, '\n', h->text, i);
+ }
+
+return g ? g->s : NULL;
+}
+
+
+/*************************************************
+* Set up removed header line(s) *
+*************************************************/
+
+/* This function is called by the remove_header modifier. The argument is
+treated as a sequence of header names which are added to a colon separated
+list, provided there isn't an identical one already there.
+
+Argument: string of header names
+Returns: nothing
+*/
+
+static void
+setup_remove_header(const uschar *hnames)
+{
+if (*hnames)
+ acl_removed_headers = acl_removed_headers
+ ? string_sprintf("%s : %s", acl_removed_headers, hnames)
+ : string_copy(hnames);
+}
+
+
+
/*************************************************
* Handle warnings *
*************************************************/
the message's headers, and/or writes information to the log. In each case, this
only happens once (per message for headers, per connection for log).
+** NOTE: The header adding action using the "message" setting is historic, and
+its use is now deprecated. The new add_header modifier should be used instead.
+
Arguments:
where ACL_WHERE_xxxx indicating which ACL this is
user_message message for adding to headers
static void
acl_warn(int where, uschar *user_message, uschar *log_message)
{
-int hlen;
-
if (log_message != NULL && log_message != user_message)
{
uschar *text;
strcmpic(log_message, US"sender verify failed") == 0)
text = string_sprintf("%s: %s", text, sender_verified_failed->message);
- /* Search previously logged warnings. They are kept in malloc store so they
- can be freed at the start of a new message. */
+ /* Search previously logged warnings. They are kept in malloc
+ store so they can be freed at the start of a new message. */
- for (logged = acl_warn_logged; logged != NULL; logged = logged->next)
+ for (logged = acl_warn_logged; logged; logged = logged->next)
if (Ustrcmp(logged->text, text) == 0) break;
- if (logged == NULL)
+ if (!logged)
{
int length = Ustrlen(text) + 1;
log_write(0, LOG_MAIN, "%s", text);
logged = store_malloc(sizeof(string_item) + length);
- logged->text = (uschar *)logged + sizeof(string_item);
+ logged->text = US logged + sizeof(string_item);
memcpy(logged->text, text, length);
logged->next = acl_warn_logged;
acl_warn_logged = logged;
/* If there's no user message, we are done. */
-if (user_message == NULL) return;
+if (!user_message) return;
/* If this isn't a message ACL, we can't do anything with a user message.
Log an error. */
return;
}
-/* Treat the user message as a sequence of one or more header lines. */
+/* The code for setting up header lines is now abstracted into a separate
+function so that it can be used for the add_header modifier as well. */
-hlen = Ustrlen(user_message);
-if (hlen > 0)
- {
- uschar *text, *p, *q;
+setup_header(user_message);
+}
- /* Add a final newline if not present */
- text = ((user_message)[hlen-1] == '\n')? user_message :
- string_sprintf("%s\n", user_message);
- /* Loop for multiple header lines, taking care about continuations */
+/*************************************************
+* Verify and check reverse DNS *
+*************************************************/
- for (p = q = text; *p != 0; )
- {
- uschar *s;
- int newtype = htype_add_bot;
- header_line **hptr = &acl_warn_headers;
+/* Called from acl_verify() below. We look up the host name(s) of the client IP
+address if this has not yet been done. The host_name_lookup() function checks
+that one of these names resolves to an address list that contains the client IP
+address, so we don't actually have to do the check here.
- /* Find next header line within the string */
+Arguments:
+ user_msgptr pointer for user message
+ log_msgptr pointer for log message
- for (;;)
- {
- q = Ustrchr(q, '\n');
- if (*(++q) != ' ' && *q != '\t') break;
- }
+Returns: OK verification condition succeeded
+ FAIL verification failed
+ DEFER there was a problem verifying
+*/
- /* If the line starts with a colon, interpret the instruction for where to
- add it. This temporarily sets up a new type. */
+static int
+acl_verify_reverse(uschar **user_msgptr, uschar **log_msgptr)
+{
+int rc;
- if (*p == ':')
- {
- if (strncmpic(p, US":after_received:", 16) == 0)
- {
- newtype = htype_add_rec;
- p += 16;
- }
- else if (strncmpic(p, US":at_start_rfc:", 14) == 0)
- {
- newtype = htype_add_rfc;
- p += 14;
- }
- else if (strncmpic(p, US":at_start:", 10) == 0)
- {
- newtype = htype_add_top;
- p += 10;
- }
- else if (strncmpic(p, US":at_end:", 8) == 0)
- {
- newtype = htype_add_bot;
- p += 8;
- }
- while (*p == ' ' || *p == '\t') p++;
- }
+user_msgptr = user_msgptr; /* stop compiler warning */
- /* See if this line starts with a header name, and if not, add X-ACL-Warn:
- to the front of it. */
+/* Previous success */
- for (s = p; s < q - 1; s++)
- {
- if (*s == ':' || !isgraph(*s)) break;
- }
+if (sender_host_name != NULL) return OK;
- s = string_sprintf("%s%.*s", (*s == ':')? "" : "X-ACL-Warn: ", q - p, p);
- hlen = Ustrlen(s);
+/* Previous failure */
- /* See if this line has already been added */
+if (host_lookup_failed)
+ {
+ *log_msgptr = string_sprintf("host lookup failed%s", host_lookup_msg);
+ return FAIL;
+ }
- while (*hptr != NULL)
- {
- if (Ustrncmp((*hptr)->text, s, hlen) == 0) break;
- hptr = &((*hptr)->next);
- }
+/* Need to do a lookup */
- /* Add if not previously present */
+HDEBUG(D_acl)
+ debug_printf_indent("looking up host name to force name/address consistency check\n");
- if (*hptr == NULL)
- {
- header_line *h = store_get(sizeof(header_line));
- h->text = s;
- h->next = NULL;
- h->type = newtype;
- h->slen = hlen;
- *hptr = h;
- hptr = &(h->next);
- }
+if ((rc = host_name_lookup()) != OK)
+ {
+ *log_msgptr = rc == DEFER
+ ? US"host lookup deferred for reverse lookup check"
+ : string_sprintf("host lookup failed for reverse lookup check%s",
+ host_lookup_msg);
+ return rc; /* DEFER or FAIL */
+ }
+
+host_build_sender_fullhost();
+return OK;
+}
- /* Advance for next header line within the string */
- p = q;
+
+/*************************************************
+* Check client IP address matches CSA target *
+*************************************************/
+
+/* Called from acl_verify_csa() below. This routine scans a section of a DNS
+response for address records belonging to the CSA target hostname. The section
+is specified by the reset argument, either RESET_ADDITIONAL or RESET_ANSWERS.
+If one of the addresses matches the client's IP address, then the client is
+authorized by CSA. If there are target IP addresses but none of them match
+then the client is using an unauthorized IP address. If there are no target IP
+addresses then the client cannot be using an authorized IP address. (This is
+an odd configuration - why didn't the SRV record have a weight of 1 instead?)
+
+Arguments:
+ dnsa the DNS answer block
+ dnss a DNS scan block for us to use
+ reset option specifying what portion to scan, as described above
+ target the target hostname to use for matching RR names
+
+Returns: CSA_OK successfully authorized
+ CSA_FAIL_MISMATCH addresses found but none matched
+ CSA_FAIL_NOADDR no target addresses found
+*/
+
+static int
+acl_verify_csa_address(dns_answer *dnsa, dns_scan *dnss, int reset,
+ uschar *target)
+{
+int rc = CSA_FAIL_NOADDR;
+
+for (dns_record * rr = dns_next_rr(dnsa, dnss, reset);
+ rr;
+ rr = dns_next_rr(dnsa, dnss, RESET_NEXT))
+ {
+ /* Check this is an address RR for the target hostname. */
+
+ if (rr->type != T_A
+ #if HAVE_IPV6
+ && rr->type != T_AAAA
+ #endif
+ ) continue;
+
+ if (strcmpic(target, rr->name) != 0) continue;
+
+ rc = CSA_FAIL_MISMATCH;
+
+ /* Turn the target address RR into a list of textual IP addresses and scan
+ the list. There may be more than one if it is an A6 RR. */
+
+ for (dns_address * da = dns_address_from_rr(dnsa, rr); da; da = da->next)
+ {
+ /* If the client IP address matches the target IP address, it's good! */
+
+ DEBUG(D_acl) debug_printf_indent("CSA target address is %s\n", da->address);
+
+ if (strcmpic(sender_host_address, da->address) == 0) return CSA_OK;
}
}
+
+/* If we found some target addresses but none of them matched, the client is
+using an unauthorized IP address, otherwise the target has no authorized IP
+addresses. */
+
+return rc;
}
/*************************************************
-* Verify and check reverse DNS *
+* Verify Client SMTP Authorization *
*************************************************/
-/* Called from acl_verify() below. We look up the host name(s) of the client IP
-address if this has not yet been done. The host_name_lookup() function checks
-that one of these names resolves to an address list that contains the client IP
-address, so we don't actually have to do the check here.
+/* Called from acl_verify() below. This routine calls dns_lookup_special()
+to find the CSA SRV record corresponding to the domain argument, or
+$sender_helo_name if no argument is provided. It then checks that the
+client is authorized, and that its IP address corresponds to the SRV
+target's address by calling acl_verify_csa_address() above. The address
+should have been returned in the DNS response's ADDITIONAL section, but if
+not we perform another DNS lookup to get it.
Arguments:
- user_msgptr pointer for user message
- log_msgptr pointer for log message
+ domain pointer to optional parameter following verify = csa
-Returns: OK verification condition succeeded
- FAIL verification failed
- DEFER there was a problem verifying
+Returns: CSA_UNKNOWN no valid CSA record found
+ CSA_OK successfully authorized
+ CSA_FAIL_* client is definitely not authorized
+ CSA_DEFER_* there was a DNS problem
*/
static int
-acl_verify_reverse(uschar **user_msgptr, uschar **log_msgptr)
+acl_verify_csa(const uschar *domain)
{
-int rc;
+tree_node *t;
+const uschar *found;
+int priority, weight, port;
+dns_answer * dnsa = store_get_dns_answer();
+dns_scan dnss;
+dns_record *rr;
+int rc, type;
+uschar target[256];
+
+/* Work out the domain we are using for the CSA lookup. The default is the
+client's HELO domain. If the client has not said HELO, use its IP address
+instead. If it's a local client (exim -bs), CSA isn't applicable. */
+
+while (isspace(*domain) && *domain != '\0') ++domain;
+if (*domain == '\0') domain = sender_helo_name;
+if (domain == NULL) domain = sender_host_address;
+if (sender_host_address == NULL) return CSA_UNKNOWN;
+
+/* If we have an address literal, strip off the framing ready for turning it
+into a domain. The framing consists of matched square brackets possibly
+containing a keyword and a colon before the actual IP address. */
+
+if (domain[0] == '[')
+ {
+ const uschar *start = Ustrchr(domain, ':');
+ if (start == NULL) start = domain;
+ domain = string_copyn(start + 1, Ustrlen(start) - 2);
+ }
-user_msgptr = user_msgptr; /* stop compiler warning */
+/* Turn domains that look like bare IP addresses into domains in the reverse
+DNS. This code also deals with address literals and $sender_host_address. It's
+not quite kosher to treat bare domains such as EHLO 192.0.2.57 the same as
+address literals, but it's probably the most friendly thing to do. This is an
+extension to CSA, so we allow it to be turned off for proper conformance. */
-/* Previous success */
+if (string_is_ip_address(domain, NULL) != 0)
+ {
+ if (!dns_csa_use_reverse) return CSA_UNKNOWN;
+ domain = dns_build_reverse(domain);
+ }
-if (sender_host_name != NULL) return OK;
+/* Find out if we've already done the CSA check for this domain. If we have,
+return the same result again. Otherwise build a new cached result structure
+for this domain. The name is filled in now, and the value is filled in when
+we return from this function. */
-/* Previous failure */
+t = tree_search(csa_cache, domain);
+if (t != NULL) return t->data.val;
-if (host_lookup_failed)
+t = store_get_perm(sizeof(tree_node) + Ustrlen(domain), is_tainted(domain));
+Ustrcpy(t->name, domain);
+(void)tree_insertnode(&csa_cache, t);
+
+/* Now we are ready to do the actual DNS lookup(s). */
+
+found = domain;
+switch (dns_special_lookup(dnsa, domain, T_CSA, &found))
{
- *log_msgptr = string_sprintf("host lookup failed%s", host_lookup_msg);
- return FAIL;
- }
+ /* If something bad happened (most commonly DNS_AGAIN), defer. */
-/* Need to do a lookup */
+ default:
+ return t->data.val = CSA_DEFER_SRV;
-HDEBUG(D_acl)
- debug_printf("looking up host name to force name/address consistency check\n");
+ /* If we found nothing, the client's authorization is unknown. */
-if ((rc = host_name_lookup()) != OK)
+ case DNS_NOMATCH:
+ case DNS_NODATA:
+ return t->data.val = CSA_UNKNOWN;
+
+ /* We got something! Go on to look at the reply in more detail. */
+
+ case DNS_SUCCEED:
+ break;
+ }
+
+/* Scan the reply for well-formed CSA SRV records. */
+
+for (rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS);
+ rr;
+ rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)) if (rr->type == T_SRV)
{
- *log_msgptr = (rc == DEFER)?
- US"host lookup deferred for reverse lookup check"
- :
- string_sprintf("host lookup failed for reverse lookup check%s",
- host_lookup_msg);
- return rc; /* DEFER or FAIL */
+ const uschar * p = rr->data;
+
+ /* Extract the numerical SRV fields (p is incremented) */
+
+ GETSHORT(priority, p);
+ GETSHORT(weight, p);
+ GETSHORT(port, p);
+
+ DEBUG(D_acl)
+ debug_printf_indent("CSA priority=%d weight=%d port=%d\n", priority, weight, port);
+
+ /* Check the CSA version number */
+
+ if (priority != 1) continue;
+
+ /* If the domain does not have a CSA SRV record of its own (i.e. the domain
+ found by dns_special_lookup() is a parent of the one we asked for), we check
+ the subdomain assertions in the port field. At the moment there's only one
+ assertion: legitimate SMTP clients are all explicitly authorized with CSA
+ SRV records of their own. */
+
+ if (Ustrcmp(found, domain) != 0)
+ return t->data.val = port & 1 ? CSA_FAIL_EXPLICIT : CSA_UNKNOWN;
+
+ /* This CSA SRV record refers directly to our domain, so we check the value
+ in the weight field to work out the domain's authorization. 0 and 1 are
+ unauthorized; 3 means the client is authorized but we can't check the IP
+ address in order to authenticate it, so we treat it as unknown; values
+ greater than 3 are undefined. */
+
+ if (weight < 2) return t->data.val = CSA_FAIL_DOMAIN;
+
+ if (weight > 2) continue;
+
+ /* Weight == 2, which means the domain is authorized. We must check that the
+ client's IP address is listed as one of the SRV target addresses. Save the
+ target hostname then break to scan the additional data for its addresses. */
+
+ (void)dn_expand(dnsa->answer, dnsa->answer + dnsa->answerlen, p,
+ (DN_EXPAND_ARG4_TYPE)target, sizeof(target));
+
+ DEBUG(D_acl) debug_printf_indent("CSA target is %s\n", target);
+
+ break;
}
-host_build_sender_fullhost();
-return OK;
+/* If we didn't break the loop then no appropriate records were found. */
+
+if (!rr) return t->data.val = CSA_UNKNOWN;
+
+/* Do not check addresses if the target is ".", in accordance with RFC 2782.
+A target of "." indicates there are no valid addresses, so the client cannot
+be authorized. (This is an odd configuration because weight=2 target=. is
+equivalent to weight=1, but we check for it in order to keep load off the
+root name servers.) Note that dn_expand() turns "." into "". */
+
+if (Ustrcmp(target, "") == 0) return t->data.val = CSA_FAIL_NOADDR;
+
+/* Scan the additional section of the CSA SRV reply for addresses belonging
+to the target. If the name server didn't return any additional data (e.g.
+because it does not fully support SRV records), we need to do another lookup
+to obtain the target addresses; otherwise we have a definitive result. */
+
+rc = acl_verify_csa_address(dnsa, &dnss, RESET_ADDITIONAL, target);
+if (rc != CSA_FAIL_NOADDR) return t->data.val = rc;
+
+/* The DNS lookup type corresponds to the IP version used by the client. */
+
+#if HAVE_IPV6
+if (Ustrchr(sender_host_address, ':') != NULL)
+ type = T_AAAA;
+else
+#endif /* HAVE_IPV6 */
+ type = T_A;
+
+
+lookup_dnssec_authenticated = NULL;
+switch (dns_lookup(dnsa, target, type, NULL))
+ {
+ /* If something bad happened (most commonly DNS_AGAIN), defer. */
+
+ default:
+ return t->data.val = CSA_DEFER_ADDR;
+
+ /* If the query succeeded, scan the addresses and return the result. */
+
+ case DNS_SUCCEED:
+ rc = acl_verify_csa_address(dnsa, &dnss, RESET_ANSWERS, target);
+ if (rc != CSA_FAIL_NOADDR) return t->data.val = rc;
+ /* else fall through */
+
+ /* If the target has no IP addresses, the client cannot have an authorized
+ IP address. However, if the target site uses A6 records (not AAAA records)
+ we have to do yet another lookup in order to check them. */
+
+ case DNS_NOMATCH:
+ case DNS_NODATA:
+ return t->data.val = CSA_FAIL_NOADDR;
+ }
}
* Handle verification (address & other) *
*************************************************/
+enum { VERIFY_REV_HOST_LKUP, VERIFY_CERT, VERIFY_HELO, VERIFY_CSA, VERIFY_HDR_SYNTAX,
+ VERIFY_NOT_BLIND, VERIFY_HDR_SNDR, VERIFY_SNDR, VERIFY_RCPT,
+ VERIFY_HDR_NAMES_ASCII, VERIFY_ARC
+ };
+typedef struct {
+ uschar * name;
+ int value;
+ unsigned where_allowed; /* bitmap */
+ BOOL no_options; /* Never has /option(s) following */
+ unsigned alt_opt_sep; /* >0 Non-/ option separator (custom parser) */
+ } verify_type_t;
+static verify_type_t verify_type_list[] = {
+ /* name value where no-opt opt-sep */
+ { US"reverse_host_lookup", VERIFY_REV_HOST_LKUP, (unsigned)~0, FALSE, 0 },
+ { US"certificate", VERIFY_CERT, (unsigned)~0, TRUE, 0 },
+ { US"helo", VERIFY_HELO, (unsigned)~0, TRUE, 0 },
+ { US"csa", VERIFY_CSA, (unsigned)~0, FALSE, 0 },
+ { US"header_syntax", VERIFY_HDR_SYNTAX, ACL_BIT_DATA | ACL_BIT_NOTSMTP, TRUE, 0 },
+ { US"not_blind", VERIFY_NOT_BLIND, ACL_BIT_DATA | ACL_BIT_NOTSMTP, FALSE, 0 },
+ { US"header_sender", VERIFY_HDR_SNDR, ACL_BIT_DATA | ACL_BIT_NOTSMTP, FALSE, 0 },
+ { US"sender", VERIFY_SNDR, ACL_BIT_MAIL | ACL_BIT_RCPT
+ |ACL_BIT_PREDATA | ACL_BIT_DATA | ACL_BIT_NOTSMTP,
+ FALSE, 6 },
+ { US"recipient", VERIFY_RCPT, ACL_BIT_RCPT, FALSE, 0 },
+ { US"header_names_ascii", VERIFY_HDR_NAMES_ASCII, ACL_BIT_DATA | ACL_BIT_NOTSMTP, TRUE, 0 },
+#ifdef EXPERIMENTAL_ARC
+ { US"arc", VERIFY_ARC, ACL_BIT_DATA, FALSE , 0 },
+#endif
+ };
+
+
+enum { CALLOUT_DEFER_OK, CALLOUT_NOCACHE, CALLOUT_RANDOM, CALLOUT_USE_SENDER,
+ CALLOUT_USE_POSTMASTER, CALLOUT_POSTMASTER, CALLOUT_FULLPOSTMASTER,
+ CALLOUT_MAILFROM, CALLOUT_POSTMASTER_MAILFROM, CALLOUT_MAXWAIT, CALLOUT_CONNECT,
+ CALLOUT_HOLD, CALLOUT_TIME /* TIME must be last */
+ };
+typedef struct {
+ uschar * name;
+ int value;
+ int flag;
+ BOOL has_option; /* Has =option(s) following */
+ BOOL timeval; /* Has a time value */
+ } callout_opt_t;
+static callout_opt_t callout_opt_list[] = {
+ /* name value flag has-opt has-time */
+ { US"defer_ok", CALLOUT_DEFER_OK, 0, FALSE, FALSE },
+ { US"no_cache", CALLOUT_NOCACHE, vopt_callout_no_cache, FALSE, FALSE },
+ { US"random", CALLOUT_RANDOM, vopt_callout_random, FALSE, FALSE },
+ { US"use_sender", CALLOUT_USE_SENDER, vopt_callout_recipsender, FALSE, FALSE },
+ { US"use_postmaster", CALLOUT_USE_POSTMASTER,vopt_callout_recippmaster, FALSE, FALSE },
+ { US"postmaster_mailfrom",CALLOUT_POSTMASTER_MAILFROM,0, TRUE, FALSE },
+ { US"postmaster", CALLOUT_POSTMASTER, 0, FALSE, FALSE },
+ { US"fullpostmaster", CALLOUT_FULLPOSTMASTER,vopt_callout_fullpm, FALSE, FALSE },
+ { US"mailfrom", CALLOUT_MAILFROM, 0, TRUE, FALSE },
+ { US"maxwait", CALLOUT_MAXWAIT, 0, TRUE, TRUE },
+ { US"connect", CALLOUT_CONNECT, 0, TRUE, TRUE },
+ { US"hold", CALLOUT_HOLD, vopt_callout_hold, FALSE, FALSE },
+ { NULL, CALLOUT_TIME, 0, FALSE, TRUE }
+ };
+
+
+
/* This function implements the "verify" condition. It is called when
encountered in any ACL, because some tests are almost always permitted. Some
just don't make sense, and always fail (for example, an attempt to test a host
*/
static int
-acl_verify(int where, address_item *addr, uschar *arg,
+acl_verify(int where, address_item *addr, const uschar *arg,
uschar **user_msgptr, uschar **log_msgptr, int *basic_errno)
{
int sep = '/';
BOOL defer_ok = FALSE;
BOOL callout_defer_ok = FALSE;
BOOL no_details = FALSE;
+BOOL success_on_redirect = FALSE;
address_item *sender_vaddr = NULL;
uschar *verify_sender_address = NULL;
uschar *pm_mailfrom = NULL;
uschar *se_mailfrom = NULL;
-uschar *list = arg;
+
+/* Some of the verify items have slash-separated options; some do not. Diagnose
+an error if options are given for items that don't expect them.
+*/
+
+uschar *slash = Ustrchr(arg, '/');
+const uschar *list = arg;
uschar *ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size);
+verify_type_t * vp;
-if (ss == NULL) goto BAD_VERIFY;
+if (!ss) goto BAD_VERIFY;
/* Handle name/address consistency verification in a separate function. */
-if (strcmpic(ss, US"reverse_host_lookup") == 0)
+for (vp = verify_type_list;
+ CS vp < CS verify_type_list + sizeof(verify_type_list);
+ vp++
+ )
+ if (vp->alt_opt_sep ? strncmpic(ss, vp->name, vp->alt_opt_sep) == 0
+ : strcmpic (ss, vp->name) == 0)
+ break;
+if (CS vp >= CS verify_type_list + sizeof(verify_type_list))
+ goto BAD_VERIFY;
+
+if (vp->no_options && slash)
{
- if (sender_host_address == NULL) return OK;
- return acl_verify_reverse(user_msgptr, log_msgptr);
+ *log_msgptr = string_sprintf("unexpected '/' found in \"%s\" "
+ "(this verify item has no options)", arg);
+ return ERROR;
}
-
-/* TLS certificate verification is done at STARTTLS time; here we just
-test whether it was successful or not. (This is for optional verification; for
-mandatory verification, the connection doesn't last this long.) */
-
-if (strcmpic(ss, US"certificate") == 0)
+if (!(vp->where_allowed & BIT(where)))
{
- if (tls_certificate_verified) return OK;
- *user_msgptr = US"no verified certificate";
- return FAIL;
+ *log_msgptr = string_sprintf("cannot verify %s in ACL for %s",
+ vp->name, acl_wherenames[where]);
+ return ERROR;
}
+switch(vp->value)
+ {
+ case VERIFY_REV_HOST_LKUP:
+ if (!sender_host_address) return OK;
+ if ((rc = acl_verify_reverse(user_msgptr, log_msgptr)) == DEFER)
+ while ((ss = string_nextinlist(&list, &sep, NULL, 0)))
+ if (strcmpic(ss, US"defer_ok") == 0)
+ return OK;
+ return rc;
-/* We can test the result of optional HELO verification */
-
-if (strcmpic(ss, US"helo") == 0) return helo_verified? OK : FAIL;
+ case VERIFY_CERT:
+ /* TLS certificate verification is done at STARTTLS time; here we just
+ test whether it was successful or not. (This is for optional verification; for
+ mandatory verification, the connection doesn't last this long.) */
+
+ if (tls_in.certificate_verified) return OK;
+ *user_msgptr = US"no verified certificate";
+ return FAIL;
+
+ case VERIFY_HELO:
+ /* We can test the result of optional HELO verification that might have
+ occurred earlier. If not, we can attempt the verification now. */
+
+ if (!f.helo_verified && !f.helo_verify_failed) smtp_verify_helo();
+ return f.helo_verified ? OK : FAIL;
+
+ case VERIFY_CSA:
+ /* Do Client SMTP Authorization checks in a separate function, and turn the
+ result code into user-friendly strings. */
+
+ rc = acl_verify_csa(list);
+ *log_msgptr = *user_msgptr = string_sprintf("client SMTP authorization %s",
+ csa_reason_string[rc]);
+ csa_status = csa_status_string[rc];
+ DEBUG(D_acl) debug_printf_indent("CSA result %s\n", csa_status);
+ return csa_return_code[rc];
+
+#ifdef EXPERIMENTAL_ARC
+ case VERIFY_ARC:
+ { /* Do Authenticated Received Chain checks in a separate function. */
+ const uschar * condlist = CUS string_nextinlist(&list, &sep, NULL, 0);
+ int csep = 0;
+ uschar * cond;
+
+ if (!(arc_state = acl_verify_arc())) return DEFER;
+ DEBUG(D_acl) debug_printf_indent("ARC verify result %s %s%s%s\n", arc_state,
+ arc_state_reason ? "(":"", arc_state_reason, arc_state_reason ? ")":"");
+
+ if (!condlist) condlist = US"none:pass";
+ while ((cond = string_nextinlist(&condlist, &csep, NULL, 0)))
+ if (Ustrcmp(arc_state, cond) == 0) return OK;
+ return FAIL;
+ }
+#endif
-/* Handle header verification options - permitted only after DATA or a non-SMTP
-message. */
+ case VERIFY_HDR_SYNTAX:
+ /* Check that all relevant header lines have the correct 5322-syntax. If there is
+ a syntax error, we return details of the error to the sender if configured to
+ send out full details. (But a "message" setting on the ACL can override, as
+ always). */
-if (strncmpic(ss, US"header_", 7) == 0)
- {
- if (where != ACL_WHERE_DATA && where != ACL_WHERE_NOTSMTP)
- {
- *log_msgptr = string_sprintf("cannot check header contents in ACL for %s "
- "(only possible in ACL for DATA)", acl_wherenames[where]);
- return ERROR;
- }
+ rc = verify_check_headers(log_msgptr);
+ if (rc != OK && *log_msgptr)
+ if (smtp_return_error_details)
+ *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
+ else
+ acl_verify_message = *log_msgptr;
+ return rc;
- /* Check that all relevant header lines have the correct syntax. If there is
- a syntax error, we return details of the error to the sender if configured to
- send out full details. (But a "message" setting on the ACL can override, as
- always). */
+ case VERIFY_HDR_NAMES_ASCII:
+ /* Check that all header names are true 7 bit strings
+ See RFC 5322, 2.2. and RFC 6532, 3. */
- if (strcmpic(ss+7, US"syntax") == 0)
- {
- int rc = verify_check_headers(log_msgptr);
- if (rc != OK && smtp_return_error_details && *log_msgptr != NULL)
+ rc = verify_check_header_names_ascii(log_msgptr);
+ if (rc != OK && smtp_return_error_details && *log_msgptr)
*user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
return rc;
- }
- /* Check that there is at least one verifiable sender address in the relevant
- header lines. This can be followed by callout and defer options, just like
- sender and recipient. */
+ case VERIFY_NOT_BLIND:
+ /* Check that no recipient of this message is "blind", that is, every envelope
+ recipient must be mentioned in either To: or Cc:. */
+ {
+ BOOL case_sensitive = TRUE;
- else if (strcmpic(ss+7, US"sender") == 0) verify_header_sender = TRUE;
+ while ((ss = string_nextinlist(&list, &sep, NULL, 0)))
+ if (strcmpic(ss, US"case_insensitive") == 0)
+ case_sensitive = FALSE;
+ else
+ {
+ *log_msgptr = string_sprintf("unknown option \"%s\" in ACL "
+ "condition \"verify %s\"", ss, arg);
+ return ERROR;
+ }
- /* Unknown verify argument starting with "header_" */
+ if ((rc = verify_check_notblind(case_sensitive)) != OK)
+ {
+ *log_msgptr = US"bcc recipient detected";
+ if (smtp_return_error_details)
+ *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
+ }
+ return rc;
+ }
- else goto BAD_VERIFY;
- }
+ /* The remaining verification tests check recipient and sender addresses,
+ either from the envelope or from the header. There are a number of
+ slash-separated options that are common to all of them. */
-/* Otherwise, first item in verify argument must be "sender" or "recipient".
-In the case of a sender, this can optionally be followed by an address to use
-in place of the actual sender (rare special-case requirement). */
+ case VERIFY_HDR_SNDR:
+ verify_header_sender = TRUE;
+ break;
-else if (strncmpic(ss, US"sender", 6) == 0)
- {
- uschar *s = ss + 6;
- if (where > ACL_WHERE_NOTSMTP)
- {
- *log_msgptr = string_sprintf("cannot verify sender in ACL for %s "
- "(only possible for MAIL, RCPT, PREDATA, or DATA)",
- acl_wherenames[where]);
- return ERROR;
- }
- if (*s == 0)
- verify_sender_address = sender_address;
- else
- {
- while (isspace(*s)) s++;
- if (*s++ != '=') goto BAD_VERIFY;
- while (isspace(*s)) s++;
- verify_sender_address = string_copy(s);
- }
- }
-else
- {
- if (strcmpic(ss, US"recipient") != 0) goto BAD_VERIFY;
- if (addr == NULL)
+ case VERIFY_SNDR:
+ /* In the case of a sender, this can optionally be followed by an address to use
+ in place of the actual sender (rare special-case requirement). */
{
- *log_msgptr = string_sprintf("cannot verify recipient in ACL for %s "
- "(only possible for RCPT)", acl_wherenames[where]);
- return ERROR;
+ uschar *s = ss + 6;
+ if (*s == 0)
+ verify_sender_address = sender_address;
+ else
+ {
+ while (isspace(*s)) s++;
+ if (*s++ != '=') goto BAD_VERIFY;
+ while (isspace(*s)) s++;
+ verify_sender_address = string_copy(s);
+ }
}
+ break;
+
+ case VERIFY_RCPT:
+ break;
}
-/* Remaining items are optional */
-while ((ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size))
- != NULL)
+
+/* Remaining items are optional; they apply to sender and recipient
+verification, including "header sender" verification. */
+
+while ((ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
{
if (strcmpic(ss, US"defer_ok") == 0) defer_ok = TRUE;
else if (strcmpic(ss, US"no_details") == 0) no_details = TRUE;
+ else if (strcmpic(ss, US"success_on_redirect") == 0) success_on_redirect = TRUE;
/* These two old options are left for backwards compatibility */
while (isspace(*ss)) ss++;
if (*ss++ == '=')
{
+ const uschar * sublist = ss;
int optsep = ',';
- uschar *opt;
uschar buffer[256];
- while (isspace(*ss)) ss++;
-
- /* This callout option handling code has become a mess as new options
- have been added in an ad hoc manner. It should be tidied up into some
- kind of table-driven thing. */
-
- while ((opt = string_nextinlist(&ss, &optsep, buffer, sizeof(buffer)))
- != NULL)
+ uschar * opt;
+
+ while (isspace(*sublist)) sublist++;
+ while ((opt = string_nextinlist(&sublist, &optsep, buffer, sizeof(buffer))))
{
- if (strcmpic(opt, US"defer_ok") == 0) callout_defer_ok = TRUE;
- else if (strcmpic(opt, US"no_cache") == 0)
- verify_options |= vopt_callout_no_cache;
- else if (strcmpic(opt, US"random") == 0)
- verify_options |= vopt_callout_random;
- else if (strcmpic(opt, US"use_sender") == 0)
- verify_options |= vopt_callout_recipsender;
- else if (strcmpic(opt, US"use_postmaster") == 0)
- verify_options |= vopt_callout_recippmaster;
- else if (strcmpic(opt, US"postmaster") == 0) pm_mailfrom = US"";
-
- else if (strncmpic(opt, US"mailfrom", 8) == 0)
- {
- if (!verify_header_sender)
- {
- *log_msgptr = string_sprintf("\"mailfrom\" is allowed as a "
- "callout option only for verify=header_sender (detected in ACL "
- "condition \"%s\")", arg);
- return ERROR;
- }
- opt += 8;
- while (isspace(*opt)) opt++;
- if (*opt++ != '=')
- {
- *log_msgptr = string_sprintf("'=' expected after "
- "\"mailfrom\" in ACL condition \"%s\"", arg);
- return ERROR;
- }
- while (isspace(*opt)) opt++;
- se_mailfrom = string_copy(opt);
- }
+ callout_opt_t * op;
+ double period = 1.0F;
- else if (strncmpic(opt, US"postmaster_mailfrom", 19) == 0)
- {
- opt += 19;
- while (isspace(*opt)) opt++;
- if (*opt++ != '=')
- {
- *log_msgptr = string_sprintf("'=' expected after "
- "\"postmaster_mailfrom\" in ACL condition \"%s\"", arg);
- return ERROR;
- }
- while (isspace(*opt)) opt++;
- pm_mailfrom = string_copy(opt);
- }
+ for (op= callout_opt_list; op->name; op++)
+ if (strncmpic(opt, op->name, Ustrlen(op->name)) == 0)
+ break;
- else if (strncmpic(opt, US"maxwait", 7) == 0)
- {
- opt += 7;
- while (isspace(*opt)) opt++;
- if (*opt++ != '=')
- {
- *log_msgptr = string_sprintf("'=' expected after \"maxwait\" in "
- "ACL condition \"%s\"", arg);
- return ERROR;
- }
- while (isspace(*opt)) opt++;
- callout_overall = readconf_readtime(opt, 0, FALSE);
- if (callout_overall < 0)
- {
- *log_msgptr = string_sprintf("bad time value in ACL condition "
- "\"verify %s\"", arg);
- return ERROR;
- }
- }
- else if (strncmpic(opt, US"connect", 7) == 0)
- {
- opt += 7;
+ verify_options |= op->flag;
+ if (op->has_option)
+ {
+ opt += Ustrlen(op->name);
while (isspace(*opt)) opt++;
if (*opt++ != '=')
{
*log_msgptr = string_sprintf("'=' expected after "
- "\"callout_overaall\" in ACL condition \"%s\"", arg);
+ "\"%s\" in ACL verify condition \"%s\"", op->name, arg);
return ERROR;
}
while (isspace(*opt)) opt++;
- callout_connect = readconf_readtime(opt, 0, FALSE);
- if (callout_connect < 0)
- {
- *log_msgptr = string_sprintf("bad time value in ACL condition "
- "\"verify %s\"", arg);
- return ERROR;
- }
- }
- else /* Plain time is callout connect/command timeout */
- {
- callout = readconf_readtime(opt, 0, FALSE);
- if (callout < 0)
- {
- *log_msgptr = string_sprintf("bad time value in ACL condition "
- "\"verify %s\"", arg);
- return ERROR;
- }
- }
+ }
+ if (op->timeval && (period = readconf_readtime(opt, 0, FALSE)) < 0)
+ {
+ *log_msgptr = string_sprintf("bad time value in ACL condition "
+ "\"verify %s\"", arg);
+ return ERROR;
+ }
+
+ switch(op->value)
+ {
+ case CALLOUT_DEFER_OK: callout_defer_ok = TRUE; break;
+ case CALLOUT_POSTMASTER: pm_mailfrom = US""; break;
+ case CALLOUT_FULLPOSTMASTER: pm_mailfrom = US""; break;
+ case CALLOUT_MAILFROM:
+ if (!verify_header_sender)
+ {
+ *log_msgptr = string_sprintf("\"mailfrom\" is allowed as a "
+ "callout option only for verify=header_sender (detected in ACL "
+ "condition \"%s\")", arg);
+ return ERROR;
+ }
+ se_mailfrom = string_copy(opt);
+ break;
+ case CALLOUT_POSTMASTER_MAILFROM: pm_mailfrom = string_copy(opt); break;
+ case CALLOUT_MAXWAIT: callout_overall = period; break;
+ case CALLOUT_CONNECT: callout_connect = period; break;
+ case CALLOUT_TIME: callout = period; break;
+ }
}
}
else
if (verify_header_sender)
{
- rc = verify_check_header_address(user_msgptr, log_msgptr, callout,
- callout_overall, callout_connect, se_mailfrom, pm_mailfrom, verify_options);
- if (smtp_return_error_details)
+ int verrno;
+
+ if ((rc = verify_check_header_address(user_msgptr, log_msgptr, callout,
+ callout_overall, callout_connect, se_mailfrom, pm_mailfrom, verify_options,
+ &verrno)) != OK)
{
- if (*user_msgptr == NULL && *log_msgptr != NULL)
- *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
- if (rc == DEFER) acl_temp_details = TRUE;
+ *basic_errno = verrno;
+ if (smtp_return_error_details)
+ {
+ if (!*user_msgptr && *log_msgptr)
+ *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
+ if (rc == DEFER) f.acl_temp_details = TRUE;
+ }
}
}
specified. Caching elsewhere, for instance in the DNS resolver and in the
callout handling, should ensure that this is not terribly inefficient. */
-else if (verify_sender_address != NULL)
+else if (verify_sender_address)
{
- if ((verify_options & (vopt_callout_recipsender|vopt_callout_recippmaster))
- != 0)
+ if ((verify_options & (vopt_callout_recipsender|vopt_callout_recippmaster)))
{
*log_msgptr = US"use_sender or use_postmaster cannot be used for a "
"sender verify callout";
callout that was done previously). If the "routed" flag is not set, routing
must have failed, so we use the saved return code. */
- if (testflag(sender_vaddr, af_verify_routed)) rc = OK; else
+ if (testflag(sender_vaddr, af_verify_routed))
+ rc = OK;
+ else
{
rc = sender_vaddr->special_action;
*basic_errno = sender_vaddr->basic_errno;
}
- HDEBUG(D_acl) debug_printf("using cached sender verify result\n");
+ HDEBUG(D_acl) debug_printf_indent("using cached sender verify result\n");
}
/* Do a new verification, and cache the result. The cache is used to avoid
{
BOOL routed = TRUE;
uschar *save_address_data = deliver_address_data;
-
+
sender_vaddr = deliver_make_addr(verify_sender_address, TRUE);
+#ifdef SUPPORT_I18N
+ if ((sender_vaddr->prop.utf8_msg = message_smtputf8))
+ {
+ sender_vaddr->prop.utf8_downcvt = message_utf8_downconvert == 1;
+ sender_vaddr->prop.utf8_downcvt_maybe = message_utf8_downconvert == -1;
+ }
+#endif
if (no_details) setflag(sender_vaddr, af_sverify_told);
if (verify_sender_address[0] != 0)
{
else
verify_options |= vopt_fake_sender;
+ if (success_on_redirect)
+ verify_options |= vopt_success_on_redirect;
+
/* The recipient, qualify, and expn options are never set in
verify_options. */
rc = verify_address(sender_vaddr, NULL, verify_options, callout,
callout_overall, callout_connect, se_mailfrom, pm_mailfrom, &routed);
- HDEBUG(D_acl) debug_printf("----------- end verify ------------\n");
+ HDEBUG(D_acl) debug_printf_indent("----------- end verify ------------\n");
- if (rc == OK)
- {
- if (Ustrcmp(sender_vaddr->address, verify_sender_address) != 0)
- {
- DEBUG(D_acl) debug_printf("sender %s verified ok as %s\n",
- verify_sender_address, sender_vaddr->address);
- }
- else
- {
- DEBUG(D_acl) debug_printf("sender %s verified ok\n",
- verify_sender_address);
- }
- }
- else *basic_errno = sender_vaddr->basic_errno;
+ if (rc != OK)
+ *basic_errno = sender_vaddr->basic_errno;
+ else
+ DEBUG(D_acl)
+ {
+ if (Ustrcmp(sender_vaddr->address, verify_sender_address) != 0)
+ debug_printf_indent("sender %s verified ok as %s\n",
+ verify_sender_address, sender_vaddr->address);
+ else
+ debug_printf_indent("sender %s verified ok\n",
+ verify_sender_address);
+ }
}
- else rc = OK; /* Null sender */
+ else
+ rc = OK; /* Null sender */
/* Cache the result code */
sender_vaddr->special_action = rc;
sender_vaddr->next = sender_verified_list;
sender_verified_list = sender_vaddr;
-
- /* Restore the recipient address data, which might have been clobbered by
+
+ /* Restore the recipient address data, which might have been clobbered by
the sender verification. */
-
+
deliver_address_data = save_address_data;
}
-
+
/* Put the sender address_data value into $sender_address_data */
- sender_address_data = sender_vaddr->p.address_data;
+ sender_address_data = sender_vaddr->prop.address_data;
}
/* A recipient address just gets a straightforward verify; again we must handle
{
address_item addr2;
+ if (success_on_redirect)
+ verify_options |= vopt_success_on_redirect;
+
/* We must use a copy of the address for verification, because it might
get rewritten. */
addr2 = *addr;
rc = verify_address(&addr2, NULL, verify_options|vopt_is_recipient, callout,
callout_overall, callout_connect, se_mailfrom, pm_mailfrom, NULL);
- HDEBUG(D_acl) debug_printf("----------- end verify ------------\n");
- *log_msgptr = addr2.message;
- *user_msgptr = addr2.user_message;
+ HDEBUG(D_acl) debug_printf_indent("----------- end verify ------------\n");
+
*basic_errno = addr2.basic_errno;
+ *log_msgptr = addr2.message;
+ *user_msgptr = (addr2.user_message != NULL)?
+ addr2.user_message : addr2.message;
+
+ /* Allow details for temporary error if the address is so flagged. */
+ if (testflag((&addr2), af_pass_message)) f.acl_temp_details = TRUE;
/* Make $address_data visible */
- deliver_address_data = addr2.p.address_data;
+ deliver_address_data = addr2.prop.address_data;
}
/* We have a result from the relevant test. Handle defer overrides first. */
if (rc == DEFER && (defer_ok ||
(callout_defer_ok && *basic_errno == ERRNO_CALLOUTDEFER)))
{
- HDEBUG(D_acl) debug_printf("verify defer overridden by %s\n",
+ HDEBUG(D_acl) debug_printf_indent("verify defer overridden by %s\n",
defer_ok? "defer_ok" : "callout_defer_ok");
rc = OK;
}
if (rc != OK && verify_sender_address != NULL)
{
if (rc != DEFER)
- {
*log_msgptr = *user_msgptr = US"Sender verify failed";
- }
else if (*basic_errno != ERRNO_CALLOUTDEFER)
- {
*log_msgptr = *user_msgptr = US"Could not complete sender verify";
- }
else
{
*log_msgptr = US"Could not complete sender verify callout";
BAD_VERIFY:
*log_msgptr = string_sprintf("expected \"sender[=address]\", \"recipient\", "
- "\"header_syntax\" or \"header_sender\" at start of ACL condition "
+ "\"helo\", \"header_syntax\", \"header_sender\", \"header_names_ascii\" "
+ "or \"reverse_host_lookup\" at start of ACL condition "
"\"verify %s\"", arg);
return ERROR;
}
*/
static int
-decode_control(uschar *arg, uschar **pptr, int where, uschar **log_msgptr)
+decode_control(const uschar *arg, const uschar **pptr, int where, uschar **log_msgptr)
+{
+int idx, len;
+control_def * d;
+
+if ( (idx = find_control(arg, controls_list, nelem(controls_list))) < 0
+ || ( arg[len = Ustrlen((d = controls_list+idx)->name)] != 0
+ && (!d->has_option || arg[len] != '/')
+ ) )
+ {
+ *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
+ return CONTROL_ERROR;
+ }
+
+*pptr = arg + len;
+return idx;
+}
+
+
+
+
+/*************************************************
+* Return a ratelimit error *
+*************************************************/
+
+/* Called from acl_ratelimit() below
+
+Arguments:
+ log_msgptr for error messages
+ format format string
+ ... supplementary arguments
+
+Returns: ERROR
+*/
+
+static int
+ratelimit_error(uschar **log_msgptr, const char *format, ...)
+{
+va_list ap;
+gstring * g =
+ string_cat(NULL, US"error in arguments to \"ratelimit\" condition: ");
+
+va_start(ap, format);
+g = string_vformat(g, SVFMT_EXTEND|SVFMT_REBUFFER, format, ap);
+va_end(ap);
+
+gstring_release_unused(g);
+*log_msgptr = string_from_gstring(g);
+return ERROR;
+}
+
+
+
+
+/*************************************************
+* Handle rate limiting *
+*************************************************/
+
+/* Called by acl_check_condition() below to calculate the result
+of the ACL ratelimit condition.
+
+Note that the return value might be slightly unexpected: if the
+sender's rate is above the limit then the result is OK. This is
+similar to the dnslists condition, and is so that you can write
+ACL clauses like: defer ratelimit = 15 / 1h
+
+Arguments:
+ arg the option string for ratelimit=
+ where ACL_WHERE_xxxx indicating which ACL this is
+ log_msgptr for error messages
+
+Returns: OK - Sender's rate is above limit
+ FAIL - Sender's rate is below limit
+ DEFER - Problem opening ratelimit database
+ ERROR - Syntax error in options.
+*/
+
+static int
+acl_ratelimit(const uschar *arg, int where, uschar **log_msgptr)
{
+double limit, period, count;
+uschar *ss;
+uschar *key = NULL;
+uschar *unique = NULL;
+int sep = '/';
+BOOL leaky = FALSE, strict = FALSE, readonly = FALSE;
+BOOL noupdate = FALSE, badacl = FALSE;
+int mode = RATE_PER_WHAT;
+int old_pool, rc;
+tree_node **anchor, *t;
+open_db dbblock, *dbm;
+int dbdb_size;
+dbdata_ratelimit *dbd;
+dbdata_ratelimit_unique *dbdb;
+struct timeval tv;
+
+/* Parse the first two options and record their values in expansion
+variables. These variables allow the configuration to have informative
+error messages based on rate limits obtained from a table lookup. */
+
+/* First is the maximum number of messages per period / maximum burst
+size, which must be greater than or equal to zero. Zero is useful for
+rate measurement as opposed to rate limiting. */
+
+if (!(sender_rate_limit = string_nextinlist(&arg, &sep, NULL, 0)))
+ return ratelimit_error(log_msgptr, "sender rate limit not set");
+
+limit = Ustrtod(sender_rate_limit, &ss);
+if (tolower(*ss) == 'k') { limit *= 1024.0; ss++; }
+else if (tolower(*ss) == 'm') { limit *= 1024.0*1024.0; ss++; }
+else if (tolower(*ss) == 'g') { limit *= 1024.0*1024.0*1024.0; ss++; }
+
+if (limit < 0.0 || *ss != '\0')
+ return ratelimit_error(log_msgptr,
+ "\"%s\" is not a positive number", sender_rate_limit);
+
+/* Second is the rate measurement period / exponential smoothing time
+constant. This must be strictly greater than zero, because zero leads to
+run-time division errors. */
+
+period = !(sender_rate_period = string_nextinlist(&arg, &sep, NULL, 0))
+ ? -1.0 : readconf_readtime(sender_rate_period, 0, FALSE);
+if (period <= 0.0)
+ return ratelimit_error(log_msgptr,
+ "\"%s\" is not a time value", sender_rate_period);
+
+/* By default we are counting one of something, but the per_rcpt,
+per_byte, and count options can change this. */
+
+count = 1.0;
+
+/* Parse the other options. */
+
+while ((ss = string_nextinlist(&arg, &sep, big_buffer, big_buffer_size)))
+ {
+ if (strcmpic(ss, US"leaky") == 0) leaky = TRUE;
+ else if (strcmpic(ss, US"strict") == 0) strict = TRUE;
+ else if (strcmpic(ss, US"noupdate") == 0) noupdate = TRUE;
+ else if (strcmpic(ss, US"readonly") == 0) readonly = TRUE;
+ else if (strcmpic(ss, US"per_cmd") == 0) RATE_SET(mode, PER_CMD);
+ else if (strcmpic(ss, US"per_conn") == 0)
+ {
+ RATE_SET(mode, PER_CONN);
+ if (where == ACL_WHERE_NOTSMTP || where == ACL_WHERE_NOTSMTP_START)
+ badacl = TRUE;
+ }
+ else if (strcmpic(ss, US"per_mail") == 0)
+ {
+ RATE_SET(mode, PER_MAIL);
+ if (where > ACL_WHERE_NOTSMTP) badacl = TRUE;
+ }
+ else if (strcmpic(ss, US"per_rcpt") == 0)
+ {
+ /* If we are running in the RCPT ACL, then we'll count the recipients
+ one by one, but if we are running when we have accumulated the whole
+ list then we'll add them all in one batch. */
+ if (where == ACL_WHERE_RCPT)
+ RATE_SET(mode, PER_RCPT);
+ else if (where >= ACL_WHERE_PREDATA && where <= ACL_WHERE_NOTSMTP)
+ RATE_SET(mode, PER_ALLRCPTS), count = (double)recipients_count;
+ else if (where == ACL_WHERE_MAIL || where > ACL_WHERE_NOTSMTP)
+ RATE_SET(mode, PER_RCPT), badacl = TRUE;
+ }
+ else if (strcmpic(ss, US"per_byte") == 0)
+ {
+ /* If we have not yet received the message data and there was no SIZE
+ declaration on the MAIL command, then it's safe to just use a value of
+ zero and let the recorded rate decay as if nothing happened. */
+ RATE_SET(mode, PER_MAIL);
+ if (where > ACL_WHERE_NOTSMTP) badacl = TRUE;
+ else count = message_size < 0 ? 0.0 : (double)message_size;
+ }
+ else if (strcmpic(ss, US"per_addr") == 0)
+ {
+ RATE_SET(mode, PER_RCPT);
+ if (where != ACL_WHERE_RCPT) badacl = TRUE, unique = US"*";
+ else unique = string_sprintf("%s@%s", deliver_localpart, deliver_domain);
+ }
+ else if (strncmpic(ss, US"count=", 6) == 0)
+ {
+ uschar *e;
+ count = Ustrtod(ss+6, &e);
+ if (count < 0.0 || *e != '\0')
+ return ratelimit_error(log_msgptr, "\"%s\" is not a positive number", ss);
+ }
+ else if (strncmpic(ss, US"unique=", 7) == 0)
+ unique = string_copy(ss + 7);
+ else if (!key)
+ key = string_copy(ss);
+ else
+ key = string_sprintf("%s/%s", key, ss);
+ }
+
+/* Sanity check. When the badacl flag is set the update mode must either
+be readonly (which is the default if it is omitted) or, for backwards
+compatibility, a combination of noupdate and strict or leaky. */
+
+if (mode == RATE_PER_CLASH)
+ return ratelimit_error(log_msgptr, "conflicting per_* options");
+if (leaky + strict + readonly > 1)
+ return ratelimit_error(log_msgptr, "conflicting update modes");
+if (badacl && (leaky || strict) && !noupdate)
+ return ratelimit_error(log_msgptr,
+ "\"%s\" must not have /leaky or /strict option, or cannot be used in %s ACL",
+ ratelimit_option_string[mode], acl_wherenames[where]);
+
+/* Set the default values of any unset options. In readonly mode we
+perform the rate computation without any increment so that its value
+decays to eventually allow over-limit senders through. */
+
+if (noupdate) readonly = TRUE, leaky = strict = FALSE;
+if (badacl) readonly = TRUE;
+if (readonly) count = 0.0;
+if (!strict && !readonly) leaky = TRUE;
+if (mode == RATE_PER_WHAT) mode = RATE_PER_MAIL;
+
+/* Create the lookup key. If there is no explicit key, use sender_host_address.
+If there is no sender_host_address (e.g. -bs or acl_not_smtp) then we simply
+omit it. The smoothing constant (sender_rate_period) and the per_xxx options
+are added to the key because they alter the meaning of the stored data. */
+
+if (!key)
+ key = !sender_host_address ? US"" : sender_host_address;
+
+key = string_sprintf("%s/%s/%s%s",
+ sender_rate_period,
+ ratelimit_option_string[mode],
+ unique == NULL ? "" : "unique/",
+ key);
+
+HDEBUG(D_acl)
+ debug_printf_indent("ratelimit condition count=%.0f %.1f/%s\n", count, limit, key);
+
+/* See if we have already computed the rate by looking in the relevant tree.
+For per-connection rate limiting, store tree nodes and dbdata in the permanent
+pool so that they survive across resets. In readonly mode we only remember the
+result for the rest of this command in case a later command changes it. After
+this bit of logic the code is independent of the per_* mode. */
+
+old_pool = store_pool;
+
+if (readonly)
+ anchor = &ratelimiters_cmd;
+else switch(mode)
+ {
+ case RATE_PER_CONN:
+ anchor = &ratelimiters_conn;
+ store_pool = POOL_PERM;
+ break;
+ case RATE_PER_BYTE:
+ case RATE_PER_MAIL:
+ case RATE_PER_ALLRCPTS:
+ anchor = &ratelimiters_mail;
+ break;
+ case RATE_PER_ADDR:
+ case RATE_PER_CMD:
+ case RATE_PER_RCPT:
+ anchor = &ratelimiters_cmd;
+ break;
+ default:
+ anchor = NULL; /* silence an "unused" complaint */
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE,
+ "internal ACL error: unknown ratelimit mode %d", mode);
+ break;
+ }
+
+if ((t = tree_search(*anchor, key)))
+ {
+ dbd = t->data.ptr;
+ /* The following few lines duplicate some of the code below. */
+ rc = (dbd->rate < limit)? FAIL : OK;
+ store_pool = old_pool;
+ sender_rate = string_sprintf("%.1f", dbd->rate);
+ HDEBUG(D_acl)
+ debug_printf_indent("ratelimit found pre-computed rate %s\n", sender_rate);
+ return rc;
+ }
+
+/* We aren't using a pre-computed rate, so get a previously recorded rate
+from the database, which will be updated and written back if required. */
+
+if (!(dbm = dbfn_open(US"ratelimit", O_RDWR, &dbblock, TRUE, TRUE)))
+ {
+ store_pool = old_pool;
+ sender_rate = NULL;
+ HDEBUG(D_acl) debug_printf_indent("ratelimit database not available\n");
+ *log_msgptr = US"ratelimit database not available";
+ return DEFER;
+ }
+dbdb = dbfn_read_with_length(dbm, key, &dbdb_size);
+dbd = NULL;
+
+gettimeofday(&tv, NULL);
+
+if (dbdb)
+ {
+ /* Locate the basic ratelimit block inside the DB data. */
+ HDEBUG(D_acl) debug_printf_indent("ratelimit found key in database\n");
+ dbd = &dbdb->dbd;
+
+ /* Forget the old Bloom filter if it is too old, so that we count each
+ repeating event once per period. We don't simply clear and re-use the old
+ filter because we want its size to change if the limit changes. Note that
+ we keep the dbd pointer for copying the rate into the new data block. */
+
+ if(unique && tv.tv_sec > dbdb->bloom_epoch + period)
+ {
+ HDEBUG(D_acl) debug_printf_indent("ratelimit discarding old Bloom filter\n");
+ dbdb = NULL;
+ }
+
+ /* Sanity check. */
+
+ if(unique && dbdb_size < sizeof(*dbdb))
+ {
+ HDEBUG(D_acl) debug_printf_indent("ratelimit discarding undersize Bloom filter\n");
+ dbdb = NULL;
+ }
+ }
+
+/* Allocate a new data block if the database lookup failed
+or the Bloom filter passed its age limit. */
+
+if (!dbdb)
+ {
+ if (!unique)
+ {
+ /* No Bloom filter. This basic ratelimit block is initialized below. */
+ HDEBUG(D_acl) debug_printf_indent("ratelimit creating new rate data block\n");
+ dbdb_size = sizeof(*dbd);
+ dbdb = store_get(dbdb_size, FALSE); /* not tainted */
+ }
+ else
+ {
+ int extra;
+ HDEBUG(D_acl) debug_printf_indent("ratelimit creating new Bloom filter\n");
+
+ /* See the long comment below for an explanation of the magic number 2.
+ The filter has a minimum size in case the rate limit is very small;
+ this is determined by the definition of dbdata_ratelimit_unique. */
+
+ extra = (int)limit * 2 - sizeof(dbdb->bloom);
+ if (extra < 0) extra = 0;
+ dbdb_size = sizeof(*dbdb) + extra;
+ dbdb = store_get(dbdb_size, FALSE); /* not tainted */
+ dbdb->bloom_epoch = tv.tv_sec;
+ dbdb->bloom_size = sizeof(dbdb->bloom) + extra;
+ memset(dbdb->bloom, 0, dbdb->bloom_size);
+
+ /* Preserve any basic ratelimit data (which is our longer-term memory)
+ by copying it from the discarded block. */
+
+ if (dbd)
+ {
+ dbdb->dbd = *dbd;
+ dbd = &dbdb->dbd;
+ }
+ }
+ }
+
+/* If we are counting unique events, find out if this event is new or not.
+If the client repeats the event during the current period then it should be
+counted. We skip this code in readonly mode for efficiency, because any
+changes to the filter will be discarded and because count is already set to
+zero. */
+
+if (unique && !readonly)
+ {
+ /* We identify unique events using a Bloom filter. (You can find my
+ notes on Bloom filters at http://fanf.livejournal.com/81696.html)
+ With the per_addr option, an "event" is a recipient address, though the
+ user can use the unique option to define their own events. We only count
+ an event if we have not seen it before.
+
+ We size the filter according to the rate limit, which (in leaky mode)
+ is the limit on the population of the filter. We allow 16 bits of space
+ per entry (see the construction code above) and we set (up to) 8 of them
+ when inserting an element (see the loop below). The probability of a false
+ positive (an event we have not seen before but which we fail to count) is
+
+ size = limit * 16
+ numhash = 8
+ allzero = exp(-numhash * pop / size)
+ = exp(-0.5 * pop / limit)
+ fpr = pow(1 - allzero, numhash)
+
+ For senders at the limit the fpr is 0.06% or 1 in 1700
+ and for senders at half the limit it is 0.0006% or 1 in 170000
+
+ In strict mode the Bloom filter can fill up beyond the normal limit, in
+ which case the false positive rate will rise. This means that the
+ measured rate for very fast senders can bogusly drop off after a while.
+
+ At twice the limit, the fpr is 2.5% or 1 in 40
+ At four times the limit, it is 31% or 1 in 3.2
+
+ It takes ln(pop/limit) periods for an over-limit burst of pop events to
+ decay below the limit, and if this is more than one then the Bloom filter
+ will be discarded before the decay gets that far. The false positive rate
+ at this threshold is 9.3% or 1 in 10.7. */
+
+ BOOL seen;
+ unsigned n, hash, hinc;
+ uschar md5sum[16];
+ md5 md5info;
+
+ /* Instead of using eight independent hash values, we combine two values
+ using the formula h1 + n * h2. This does not harm the Bloom filter's
+ performance, and means the amount of hash we need is independent of the
+ number of bits we set in the filter. */
+
+ md5_start(&md5info);
+ md5_end(&md5info, unique, Ustrlen(unique), md5sum);
+ hash = md5sum[0] | md5sum[1] << 8 | md5sum[2] << 16 | md5sum[3] << 24;
+ hinc = md5sum[4] | md5sum[5] << 8 | md5sum[6] << 16 | md5sum[7] << 24;
+
+ /* Scan the bits corresponding to this event. A zero bit means we have
+ not seen it before. Ensure all bits are set to record this event. */
+
+ HDEBUG(D_acl) debug_printf_indent("ratelimit checking uniqueness of %s\n", unique);
+
+ seen = TRUE;
+ for (n = 0; n < 8; n++, hash += hinc)
+ {
+ int bit = 1 << (hash % 8);
+ int byte = (hash / 8) % dbdb->bloom_size;
+ if ((dbdb->bloom[byte] & bit) == 0)
+ {
+ dbdb->bloom[byte] |= bit;
+ seen = FALSE;
+ }
+ }
+
+ /* If this event has occurred before, do not count it. */
+
+ if (seen)
+ {
+ HDEBUG(D_acl) debug_printf_indent("ratelimit event found in Bloom filter\n");
+ count = 0.0;
+ }
+ else
+ HDEBUG(D_acl) debug_printf_indent("ratelimit event added to Bloom filter\n");
+ }
+
+/* If there was no previous ratelimit data block for this key, initialize
+the new one, otherwise update the block from the database. The initial rate
+is what would be computed by the code below for an infinite interval. */
+
+if (!dbd)
+ {
+ HDEBUG(D_acl) debug_printf_indent("ratelimit initializing new key's rate data\n");
+ dbd = &dbdb->dbd;
+ dbd->time_stamp = tv.tv_sec;
+ dbd->time_usec = tv.tv_usec;
+ dbd->rate = count;
+ }
+else
+ {
+ /* The smoothed rate is computed using an exponentially weighted moving
+ average adjusted for variable sampling intervals. The standard EWMA for
+ a fixed sampling interval is: f'(t) = (1 - a) * f(t) + a * f'(t - 1)
+ where f() is the measured value and f'() is the smoothed value.
+
+ Old data decays out of the smoothed value exponentially, such that data n
+ samples old is multiplied by a^n. The exponential decay time constant p
+ is defined such that data p samples old is multiplied by 1/e, which means
+ that a = exp(-1/p). We can maintain the same time constant for a variable
+ sampling interval i by using a = exp(-i/p).
+
+ The rate we are measuring is messages per period, suitable for directly
+ comparing with the limit. The average rate between now and the previous
+ message is period / interval, which we feed into the EWMA as the sample.
+
+ It turns out that the number of messages required for the smoothed rate
+ to reach the limit when they are sent in a burst is equal to the limit.
+ This can be seen by analysing the value of the smoothed rate after N
+ messages sent at even intervals. Let k = (1 - a) * p/i
+
+ rate_1 = (1 - a) * p/i + a * rate_0
+ = k + a * rate_0
+ rate_2 = k + a * rate_1
+ = k + a * k + a^2 * rate_0
+ rate_3 = k + a * k + a^2 * k + a^3 * rate_0
+ rate_N = rate_0 * a^N + k * SUM(x=0..N-1)(a^x)
+ = rate_0 * a^N + k * (1 - a^N) / (1 - a)
+ = rate_0 * a^N + p/i * (1 - a^N)
+
+ When N is large, a^N -> 0 so rate_N -> p/i as desired.
+
+ rate_N = p/i + (rate_0 - p/i) * a^N
+ a^N = (rate_N - p/i) / (rate_0 - p/i)
+ N * -i/p = log((rate_N - p/i) / (rate_0 - p/i))
+ N = p/i * log((rate_0 - p/i) / (rate_N - p/i))
+
+ Numerical analysis of the above equation, setting the computed rate to
+ increase from rate_0 = 0 to rate_N = limit, shows that for large sending
+ rates, p/i, the number of messages N = limit. So limit serves as both the
+ maximum rate measured in messages per period, and the maximum number of
+ messages that can be sent in a fast burst. */
+
+ double this_time = (double)tv.tv_sec
+ + (double)tv.tv_usec / 1000000.0;
+ double prev_time = (double)dbd->time_stamp
+ + (double)dbd->time_usec / 1000000.0;
+
+ /* We must avoid division by zero, and deal gracefully with the clock going
+ backwards. If we blunder ahead when time is in reverse then the computed
+ rate will be bogus. To be safe we clamp interval to a very small number. */
+
+ double interval = this_time - prev_time <= 0.0 ? 1e-9
+ : this_time - prev_time;
+
+ double i_over_p = interval / period;
+ double a = exp(-i_over_p);
+
+ /* Combine the instantaneous rate (period / interval) with the previous rate
+ using the smoothing factor a. In order to measure sized events, multiply the
+ instantaneous rate by the count of bytes or recipients etc. */
+
+ dbd->time_stamp = tv.tv_sec;
+ dbd->time_usec = tv.tv_usec;
+ dbd->rate = (1 - a) * count / i_over_p + a * dbd->rate;
+
+ /* When events are very widely spaced the computed rate tends towards zero.
+ Although this is accurate it turns out not to be useful for our purposes,
+ especially when the first event after a long silence is the start of a spam
+ run. A more useful model is that the rate for an isolated event should be the
+ size of the event per the period size, ignoring the lack of events outside
+ the current period and regardless of where the event falls in the period. So,
+ if the interval was so long that the calculated rate is unhelpfully small, we
+ re-initialize the rate. In the absence of higher-rate bursts, the condition
+ below is true if the interval is greater than the period. */
+
+ if (dbd->rate < count) dbd->rate = count;
+ }
+
+/* Clients sending at the limit are considered to be over the limit.
+This matters for edge cases such as a limit of zero, when the client
+should be completely blocked. */
+
+rc = dbd->rate < limit ? FAIL : OK;
+
+/* Update the state if the rate is low or if we are being strict. If we
+are in leaky mode and the sender's rate is too high, we do not update
+the recorded rate in order to avoid an over-aggressive sender's retry
+rate preventing them from getting any email through. If readonly is set,
+neither leaky nor strict are set, so we do not do any updates. */
+
+if ((rc == FAIL && leaky) || strict)
+ {
+ dbfn_write(dbm, key, dbdb, dbdb_size);
+ HDEBUG(D_acl) debug_printf_indent("ratelimit db updated\n");
+ }
+else
+ {
+ HDEBUG(D_acl) debug_printf_indent("ratelimit db not updated: %s\n",
+ readonly? "readonly mode" : "over the limit, but leaky");
+ }
+
+dbfn_close(dbm);
+
+/* Store the result in the tree for future reference. Take the taint status
+from the key for consistency even though it's unlikely we'll ever expand this. */
+
+t = store_get(sizeof(tree_node) + Ustrlen(key), is_tainted(key));
+t->data.ptr = dbd;
+Ustrcpy(t->name, key);
+(void)tree_insertnode(anchor, t);
+
+/* We create the formatted version of the sender's rate very late in
+order to ensure that it is done using the correct storage pool. */
+
+store_pool = old_pool;
+sender_rate = string_sprintf("%.1f", dbd->rate);
+
+HDEBUG(D_acl)
+ debug_printf_indent("ratelimit computed rate %s\n", sender_rate);
+
+return rc;
+}
+
+
+
+/*************************************************
+* The udpsend ACL modifier *
+*************************************************/
+
+/* Called by acl_check_condition() below.
+
+Arguments:
+ arg the option string for udpsend=
+ log_msgptr for error messages
+
+Returns: OK - Completed.
+ DEFER - Problem with DNS lookup.
+ ERROR - Syntax error in options.
+*/
+
+static int
+acl_udpsend(const uschar *arg, uschar **log_msgptr)
+{
+int sep = 0;
+uschar *hostname;
+uschar *portstr;
+uschar *portend;
+host_item *h;
+int portnum;
int len;
-control_def *d;
+int r, s;
+uschar * errstr;
-for (d = controls_list;
- d < controls_list + sizeof(controls_list)/sizeof(control_def);
- d++)
+hostname = string_nextinlist(&arg, &sep, NULL, 0);
+portstr = string_nextinlist(&arg, &sep, NULL, 0);
+
+if (!hostname)
+ {
+ *log_msgptr = US"missing destination host in \"udpsend\" modifier";
+ return ERROR;
+ }
+if (!portstr)
+ {
+ *log_msgptr = US"missing destination port in \"udpsend\" modifier";
+ return ERROR;
+ }
+if (!arg)
{
- len = Ustrlen(d->name);
- if (Ustrncmp(d->name, arg, len) == 0) break;
+ *log_msgptr = US"missing datagram payload in \"udpsend\" modifier";
+ return ERROR;
+ }
+portnum = Ustrtol(portstr, &portend, 10);
+if (*portend != '\0')
+ {
+ *log_msgptr = US"bad destination port in \"udpsend\" modifier";
+ return ERROR;
}
-if (d >= controls_list + sizeof(controls_list)/sizeof(control_def) ||
- (arg[len] != 0 && (!d->has_option || arg[len] != '/')))
+/* Make a single-item host list. */
+h = store_get(sizeof(host_item), FALSE);
+memset(h, 0, sizeof(host_item));
+h->name = hostname;
+h->port = portnum;
+h->mx = MX_NONE;
+
+if (string_is_ip_address(hostname, NULL))
+ h->address = hostname, r = HOST_FOUND;
+else
+ r = host_find_byname(h, NULL, 0, NULL, FALSE);
+if (r == HOST_FIND_FAILED || r == HOST_FIND_AGAIN)
{
- *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
- return CONTROL_ERROR;
+ *log_msgptr = US"DNS lookup failed in \"udpsend\" modifier";
+ return DEFER;
}
-*pptr = arg + len;
-return d->value;
+HDEBUG(D_acl)
+ debug_printf_indent("udpsend [%s]:%d %s\n", h->address, portnum, arg);
+
+/*XXX this could better use sendto */
+r = s = ip_connectedsocket(SOCK_DGRAM, h->address, portnum, portnum,
+ 1, NULL, &errstr, NULL);
+if (r < 0) goto defer;
+len = Ustrlen(arg);
+r = send(s, arg, len, 0);
+if (r < 0)
+ {
+ errstr = US strerror(errno);
+ close(s);
+ goto defer;
+ }
+close(s);
+if (r < len)
+ {
+ *log_msgptr =
+ string_sprintf("\"udpsend\" truncated from %d to %d octets", len, r);
+ return DEFER;
+ }
+
+HDEBUG(D_acl)
+ debug_printf_indent("udpsend %d bytes\n", r);
+
+return OK;
+
+defer:
+*log_msgptr = string_sprintf("\"udpsend\" failed: %s", errstr);
+return DEFER;
}
{
uschar *user_message = NULL;
uschar *log_message = NULL;
-uschar *p;
int rc = OK;
#ifdef WITH_CONTENT_SCAN
-int sep = '/';
+int sep = -'/';
#endif
-for (; cb != NULL; cb = cb->next)
+for (; cb; cb = cb->next)
{
- uschar *arg;
- int control_type;
+ const uschar *arg;
+ int control_type;
/* The message and log_message items set up messages to be used in
case of rejection. They are expanded later. */
if (cb->type == ACLC_MESSAGE)
{
+ HDEBUG(D_acl) debug_printf_indent(" message: %s\n", cb->arg);
user_message = cb->arg;
continue;
}
if (cb->type == ACLC_LOG_MESSAGE)
{
+ HDEBUG(D_acl) debug_printf_indent("l_message: %s\n", cb->arg);
log_message = cb->arg;
continue;
}
of them, but not for all, because expansion happens down in some lower level
checking functions in some cases. */
- if (cond_expand_at_top[cb->type])
+ if (!conditions[cb->type].expand_at_top)
+ arg = cb->arg;
+ else if (!(arg = expand_string(cb->arg)))
{
- arg = expand_string(cb->arg);
- if (arg == NULL)
- {
- if (expand_string_forcedfail) continue;
- *log_msgptr = string_sprintf("failed to expand ACL string \"%s\": %s",
- cb->arg, expand_string_message);
- return search_find_defer? DEFER : ERROR;
- }
+ if (f.expand_string_forcedfail) continue;
+ *log_msgptr = string_sprintf("failed to expand ACL string \"%s\": %s",
+ cb->arg, expand_string_message);
+ return f.search_find_defer ? DEFER : ERROR;
}
- else arg = cb->arg;
/* Show condition, and expanded condition if it's different */
HDEBUG(D_acl)
{
int lhswidth = 0;
- debug_printf("check %s%s %n",
- (!cond_modifiers[cb->type] && cb->u.negated)? "!":"",
- conditions[cb->type], &lhswidth);
+ debug_printf_indent("check %s%s %n",
+ (!conditions[cb->type].is_modifier && cb->u.negated)? "!":"",
+ conditions[cb->type].name, &lhswidth);
if (cb->type == ACLC_SET)
{
- int n = cb->u.varnumber;
- int t = (n < ACL_C_MAX)? 'c' : 'm';
- if (n >= ACL_C_MAX) n -= ACL_C_MAX;
- debug_printf("acl_%c%d ", t, n);
- lhswidth += 7;
+#ifndef DISABLE_DKIM
+ if ( Ustrcmp(cb->u.varname, "dkim_verify_status") == 0
+ || Ustrcmp(cb->u.varname, "dkim_verify_reason") == 0)
+ {
+ debug_printf("%s ", cb->u.varname);
+ lhswidth += 19;
+ }
+ else
+#endif
+ {
+ debug_printf("acl_%s ", cb->u.varname);
+ lhswidth += 5 + Ustrlen(cb->u.varname);
+ }
}
debug_printf("= %s\n", cb->arg);
/* Check that this condition makes sense at this time */
- if ((cond_forbids[cb->type] & (1 << where)) != 0)
+ if ((conditions[cb->type].forbids & (1 << where)) != 0)
{
*log_msgptr = string_sprintf("cannot %s %s condition in %s ACL",
- cond_modifiers[cb->type]? "use" : "test",
- conditions[cb->type], acl_wherenames[where]);
+ conditions[cb->type].is_modifier ? "use" : "test",
+ conditions[cb->type].name, acl_wherenames[where]);
return ERROR;
}
switch(cb->type)
{
+ case ACLC_ADD_HEADER:
+ setup_header(arg);
+ break;
+
/* A nested ACL that returns "discard" makes sense only for an "accept" or
"discard" verb. */
case ACLC_ACL:
- rc = acl_check_internal(where, addr, arg, level+1, user_msgptr, log_msgptr);
- if (rc == DISCARD && verb != ACL_ACCEPT && verb != ACL_DISCARD)
- {
- *log_msgptr = string_sprintf("nested ACL returned \"discard\" for "
- "\"%s\" command (only allowed with \"accept\" or \"discard\")",
- verbs[verb]);
- return ERROR;
- }
+ rc = acl_check_wargs(where, addr, arg, user_msgptr, log_msgptr);
+ if (rc == DISCARD && verb != ACL_ACCEPT && verb != ACL_DISCARD)
+ {
+ *log_msgptr = string_sprintf("nested ACL returned \"discard\" for "
+ "\"%s\" command (only allowed with \"accept\" or \"discard\")",
+ verbs[verb]);
+ return ERROR;
+ }
break;
case ACLC_AUTHENTICATED:
- rc = (sender_host_authenticated == NULL)? FAIL :
- match_isinlist(sender_host_authenticated, &arg, 0, NULL, NULL, MCL_STRING,
- TRUE, NULL);
+ rc = sender_host_authenticated ? match_isinlist(sender_host_authenticated,
+ &arg, 0, NULL, NULL, MCL_STRING, TRUE, NULL) : FAIL;
break;
-#ifdef EXPERIMENTAL_BRIGHTMAIL
+ #ifdef EXPERIMENTAL_BRIGHTMAIL
case ACLC_BMI_OPTIN:
{
int old_pool = store_pool;
store_pool = old_pool;
}
break;
-#endif
+ #endif
case ACLC_CONDITION:
- if (Ustrspn(arg, "0123456789") == Ustrlen(arg)) /* Digits, or empty */
+ /* The true/false parsing here should be kept in sync with that used in
+ expand.c when dealing with ECOND_BOOL so that we don't have too many
+ different definitions of what can be a boolean. */
+ if (*arg == '-'
+ ? Ustrspn(arg+1, "0123456789") == Ustrlen(arg+1) /* Negative number */
+ : Ustrspn(arg, "0123456789") == Ustrlen(arg)) /* Digits, or empty */
rc = (Uatoi(arg) == 0)? FAIL : OK;
else
rc = (strcmpic(arg, US"no") == 0 ||
*log_msgptr = string_sprintf("invalid \"condition\" value \"%s\"", arg);
break;
+ case ACLC_CONTINUE: /* Always succeeds */
+ break;
+
case ACLC_CONTROL:
- control_type = decode_control(arg, &p, where, log_msgptr);
-
- /* Check if this control makes sense at this time */
-
- if ((control_forbids[control_type] & (1 << where)) != 0)
- {
- *log_msgptr = string_sprintf("cannot use \"control=%s\" in %s ACL",
- controls[control_type], acl_wherenames[where]);
- return ERROR;
- }
-
- switch(control_type)
{
-#ifdef EXPERIMENTAL_BRIGHTMAIL
- case CONTROL_BMI_RUN:
- bmi_run = 1;
- break;
+ const uschar *p = NULL;
+ control_type = decode_control(arg, &p, where, log_msgptr);
+
+ /* Check if this control makes sense at this time */
+
+ if (controls_list[control_type].forbids & (1 << where))
+ {
+ *log_msgptr = string_sprintf("cannot use \"control=%s\" in %s ACL",
+ controls_list[control_type].name, acl_wherenames[where]);
+ return ERROR;
+ }
+
+ switch(control_type)
+ {
+ case CONTROL_AUTH_UNADVERTISED:
+ f.allow_auth_unadvertised = TRUE;
+ break;
+
+ #ifdef EXPERIMENTAL_BRIGHTMAIL
+ case CONTROL_BMI_RUN:
+ bmi_run = 1;
+ break;
+ #endif
+
+#ifndef DISABLE_DKIM
+ case CONTROL_DKIM_VERIFY:
+ f.dkim_disable_verify = TRUE;
+# ifdef SUPPORT_DMARC
+ /* Since DKIM was blocked, skip DMARC too */
+ f.dmarc_disable_verify = TRUE;
+ f.dmarc_enable_forensic = FALSE;
+# endif
+ break;
#endif
-
- case CONTROL_ERROR:
- return ERROR;
-
- case CONTROL_CASEFUL_LOCAL_PART:
- deliver_localpart = addr->cc_local_part;
- break;
-
- case CONTROL_CASELOWER_LOCAL_PART:
- deliver_localpart = addr->lc_local_part;
- break;
-
- case CONTROL_ENFORCE_SYNC:
- smtp_enforce_sync = TRUE;
- break;
- case CONTROL_NO_ENFORCE_SYNC:
- smtp_enforce_sync = FALSE;
- break;
+#ifdef SUPPORT_DMARC
+ case CONTROL_DMARC_VERIFY:
+ f.dmarc_disable_verify = TRUE;
+ break;
-#ifdef WITH_CONTENT_SCAN
- case CONTROL_NO_MBOX_UNSPOOL:
- no_mbox_unspool = TRUE;
- break;
+ case CONTROL_DMARC_FORENSIC:
+ f.dmarc_enable_forensic = TRUE;
+ break;
#endif
- case CONTROL_NO_MULTILINE:
- no_multiline_responses = TRUE;
- break;
-
- case CONTROL_FAKEREJECT:
- fake_reject = TRUE;
- if (*p == '/')
- {
- uschar *pp = p + 1;
- while (*pp != 0) pp++;
- fake_reject_text = expand_string(string_copyn(p+1, pp-p));
- p = pp;
- }
- else
- {
- /* Explicitly reset to default string */
- fake_reject_text = US"Your message has been rejected but is being kept for evaluation.\nIf it was a legit message, it may still be delivered to the target recipient(s).";
- }
- break;
-
- case CONTROL_FREEZE:
- deliver_freeze = TRUE;
- deliver_frozen_at = time(NULL);
- break;
+ case CONTROL_DSCP:
+ if (*p == '/')
+ {
+ int fd, af, level, optname, value;
+ /* If we are acting on stdin, the setsockopt may fail if stdin is not
+ a socket; we can accept that, we'll just debug-log failures anyway. */
+ fd = fileno(smtp_in);
+ af = ip_get_address_family(fd);
+ if (af < 0)
+ {
+ HDEBUG(D_acl)
+ debug_printf_indent("smtp input is probably not a socket [%s], not setting DSCP\n",
+ strerror(errno));
+ break;
+ }
+ if (dscp_lookup(p+1, af, &level, &optname, &value))
+ {
+ if (setsockopt(fd, level, optname, &value, sizeof(value)) < 0)
+ {
+ HDEBUG(D_acl) debug_printf_indent("failed to set input DSCP[%s]: %s\n",
+ p+1, strerror(errno));
+ }
+ else
+ {
+ HDEBUG(D_acl) debug_printf_indent("set input DSCP to \"%s\"\n", p+1);
+ }
+ }
+ else
+ {
+ *log_msgptr = string_sprintf("unrecognised DSCP value in \"control=%s\"", arg);
+ return ERROR;
+ }
+ }
+ else
+ {
+ *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
+ return ERROR;
+ }
+ break;
+
+ case CONTROL_ERROR:
+ return ERROR;
+
+ case CONTROL_CASEFUL_LOCAL_PART:
+ deliver_localpart = addr->cc_local_part;
+ break;
+
+ case CONTROL_CASELOWER_LOCAL_PART:
+ deliver_localpart = addr->lc_local_part;
+ break;
+
+ case CONTROL_ENFORCE_SYNC:
+ smtp_enforce_sync = TRUE;
+ break;
+
+ case CONTROL_NO_ENFORCE_SYNC:
+ smtp_enforce_sync = FALSE;
+ break;
+
+ #ifdef WITH_CONTENT_SCAN
+ case CONTROL_NO_MBOX_UNSPOOL:
+ f.no_mbox_unspool = TRUE;
+ break;
+ #endif
+
+ case CONTROL_NO_MULTILINE:
+ f.no_multiline_responses = TRUE;
+ break;
+
+ case CONTROL_NO_PIPELINING:
+ f.pipelining_enable = FALSE;
+ break;
+
+ case CONTROL_NO_DELAY_FLUSH:
+ f.disable_delay_flush = TRUE;
+ break;
+
+ case CONTROL_NO_CALLOUT_FLUSH:
+ f.disable_callout_flush = TRUE;
+ break;
+
+ case CONTROL_FAKEREJECT:
+ cancel_cutthrough_connection(TRUE, US"fakereject");
+ case CONTROL_FAKEDEFER:
+ fake_response = (control_type == CONTROL_FAKEDEFER) ? DEFER : FAIL;
+ if (*p == '/')
+ {
+ const uschar *pp = p + 1;
+ while (*pp) pp++;
+ fake_response_text = expand_string(string_copyn(p+1, pp-p-1));
+ p = pp;
+ }
+ else
+ {
+ /* Explicitly reset to default string */
+ fake_response_text = US"Your message has been rejected but is being kept for evaluation.\nIf it was a legitimate message, it may still be delivered to the target recipient(s).";
+ }
+ break;
+
+ case CONTROL_FREEZE:
+ f.deliver_freeze = TRUE;
+ deliver_frozen_at = time(NULL);
+ freeze_tell = freeze_tell_config; /* Reset to configured value */
+ if (Ustrncmp(p, "/no_tell", 8) == 0)
+ {
+ p += 8;
+ freeze_tell = NULL;
+ }
+ if (*p != 0)
+ {
+ *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
+ return ERROR;
+ }
+ cancel_cutthrough_connection(TRUE, US"item frozen");
+ break;
+
+ case CONTROL_QUEUE_ONLY:
+ f.queue_only_policy = TRUE;
+ cancel_cutthrough_connection(TRUE, US"queueing forced");
+ break;
+
+ case CONTROL_SUBMISSION:
+ originator_name = US"";
+ f.submission_mode = TRUE;
+ while (*p == '/')
+ {
+ if (Ustrncmp(p, "/sender_retain", 14) == 0)
+ {
+ p += 14;
+ f.active_local_sender_retain = TRUE;
+ f.active_local_from_check = FALSE;
+ }
+ else if (Ustrncmp(p, "/domain=", 8) == 0)
+ {
+ const uschar *pp = p + 8;
+ while (*pp && *pp != '/') pp++;
+ submission_domain = string_copyn(p+8, pp-p-8);
+ p = pp;
+ }
+ /* The name= option must be last, because it swallows the rest of
+ the string. */
+ else if (Ustrncmp(p, "/name=", 6) == 0)
+ {
+ const uschar *pp = p + 6;
+ while (*pp) pp++;
+ submission_name = string_copy(parse_fix_phrase(p+6, pp-p-6,
+ big_buffer, big_buffer_size));
+ p = pp;
+ }
+ else break;
+ }
+ if (*p != 0)
+ {
+ *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
+ return ERROR;
+ }
+ break;
+
+ case CONTROL_DEBUG:
+ {
+ uschar * debug_tag = NULL;
+ uschar * debug_opts = NULL;
+ BOOL kill = FALSE;
+
+ while (*p == '/')
+ {
+ const uschar * pp = p+1;
+ if (Ustrncmp(pp, "tag=", 4) == 0)
+ {
+ for (pp += 4; *pp && *pp != '/';) pp++;
+ debug_tag = string_copyn(p+5, pp-p-5);
+ }
+ else if (Ustrncmp(pp, "opts=", 5) == 0)
+ {
+ for (pp += 5; *pp && *pp != '/';) pp++;
+ debug_opts = string_copyn(p+6, pp-p-6);
+ }
+ else if (Ustrncmp(pp, "kill", 4) == 0)
+ {
+ for (pp += 4; *pp && *pp != '/';) pp++;
+ kill = TRUE;
+ }
+ else
+ while (*pp && *pp != '/') pp++;
+ p = pp;
+ }
+
+ if (kill)
+ debug_logging_stop();
+ else
+ debug_logging_activate(debug_tag, debug_opts);
+ }
+ break;
+
+ case CONTROL_SUPPRESS_LOCAL_FIXUPS:
+ f.suppress_local_fixups = TRUE;
+ break;
+
+ case CONTROL_CUTTHROUGH_DELIVERY:
+ {
+ uschar * ignored = NULL;
+#ifndef DISABLE_PRDR
+ if (prdr_requested)
+#else
+ if (0)
+#endif
+ /* Too hard to think about for now. We might in future cutthrough
+ the case where both sides handle prdr and this-node prdr acl
+ is "accept" */
+ ignored = US"PRDR active";
+ else
+ {
+ if (f.deliver_freeze)
+ ignored = US"frozen";
+ else if (f.queue_only_policy)
+ ignored = US"queue-only";
+ else if (fake_response == FAIL)
+ ignored = US"fakereject";
+ else
+ {
+ if (rcpt_count == 1)
+ {
+ cutthrough.delivery = TRUE; /* control accepted */
+ while (*p == '/')
+ {
+ const uschar * pp = p+1;
+ if (Ustrncmp(pp, "defer=", 6) == 0)
+ {
+ pp += 6;
+ if (Ustrncmp(pp, "pass", 4) == 0) cutthrough.defer_pass = TRUE;
+ /* else if (Ustrncmp(pp, "spool") == 0) ; default */
+ }
+ else
+ while (*pp && *pp != '/') pp++;
+ p = pp;
+ }
+ }
+ else
+ ignored = US"nonfirst rcpt";
+ }
+ }
+ DEBUG(D_acl) if (ignored)
+ debug_printf(" cutthrough request ignored on %s item\n", ignored);
+ }
+ break;
+
+#ifdef SUPPORT_I18N
+ case CONTROL_UTF8_DOWNCONVERT:
+ if (*p == '/')
+ {
+ if (p[1] == '1')
+ {
+ message_utf8_downconvert = 1;
+ addr->prop.utf8_downcvt = TRUE;
+ addr->prop.utf8_downcvt_maybe = FALSE;
+ p += 2;
+ break;
+ }
+ if (p[1] == '0')
+ {
+ message_utf8_downconvert = 0;
+ addr->prop.utf8_downcvt = FALSE;
+ addr->prop.utf8_downcvt_maybe = FALSE;
+ p += 2;
+ break;
+ }
+ if (p[1] == '-' && p[2] == '1')
+ {
+ message_utf8_downconvert = -1;
+ addr->prop.utf8_downcvt = FALSE;
+ addr->prop.utf8_downcvt_maybe = TRUE;
+ p += 3;
+ break;
+ }
+ *log_msgptr = US"bad option value for control=utf8_downconvert";
+ }
+ else
+ {
+ message_utf8_downconvert = 1;
+ addr->prop.utf8_downcvt = TRUE;
+ addr->prop.utf8_downcvt_maybe = FALSE;
+ break;
+ }
+ return ERROR;
+#endif
- case CONTROL_QUEUE_ONLY:
- queue_only_policy = TRUE;
+ }
break;
+ }
- case CONTROL_SUBMISSION:
- submission_mode = TRUE;
- while (*p == '/')
- {
- if (Ustrncmp(p, "/sender_retain", 14) == 0)
- {
- p += 14;
- active_local_sender_retain = TRUE;
- active_local_from_check = FALSE;
- }
- else if (Ustrncmp(p, "/domain=", 8) == 0)
- {
- uschar *pp = p + 8;
- while (*pp != 0 && *pp != '/') pp++;
- submission_domain = string_copyn(p+8, pp-p);
- p = pp;
- }
- else break;
- }
- if (*p != 0)
- {
- *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
- return ERROR;
- }
- break;
+ #ifdef EXPERIMENTAL_DCC
+ case ACLC_DCC:
+ {
+ /* Separate the regular expression and any optional parameters. */
+ const uschar * list = arg;
+ uschar *ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size);
+ /* Run the dcc backend. */
+ rc = dcc_process(&ss);
+ /* Modify return code based upon the existence of options. */
+ while ((ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
+ if (strcmpic(ss, US"defer_ok") == 0 && rc == DEFER)
+ rc = FAIL; /* FAIL so that the message is passed to the next ACL */
}
break;
+ #endif
-#ifdef WITH_CONTENT_SCAN
+ #ifdef WITH_CONTENT_SCAN
case ACLC_DECODE:
rc = mime_decode(&arg);
break;
-#endif
+ #endif
case ACLC_DELAY:
{
}
else
{
- HDEBUG(D_acl) debug_printf("delay modifier requests %d-second delay\n",
+ HDEBUG(D_acl) debug_printf_indent("delay modifier requests %d-second delay\n",
delay);
if (host_checking)
{
HDEBUG(D_acl)
- debug_printf("delay skipped in -bh checking mode\n");
+ debug_printf_indent("delay skipped in -bh checking mode\n");
+ }
+
+ /* NOTE 1: Remember that we may be
+ dealing with stdin/stdout here, in addition to TCP/IP connections.
+ Also, delays may be specified for non-SMTP input, where smtp_out and
+ smtp_in will be NULL. Whatever is done must work in all cases.
+
+ NOTE 2: The added feature of flushing the output before a delay must
+ apply only to SMTP input. Hence the test for smtp_out being non-NULL.
+ */
+
+ else
+ {
+ if (smtp_out && !f.disable_delay_flush)
+ mac_smtp_fflush();
+
+#if !defined(NO_POLL_H) && defined (POLLRDHUP)
+ {
+ struct pollfd p;
+ nfds_t n = 0;
+ if (smtp_out)
+ {
+ p.fd = fileno(smtp_out);
+ p.events = POLLRDHUP;
+ n = 1;
+ }
+ if (poll(&p, n, delay*1000) > 0)
+ HDEBUG(D_acl) debug_printf_indent("delay cancelled by peer close\n");
+ }
+#else
+ /* Lacking POLLRDHUP it appears to be impossible to detect that a
+ TCP/IP connection has gone away without reading from it. This means
+ that we cannot shorten the delay below if the client goes away,
+ because we cannot discover that the client has closed its end of the
+ connection. (The connection is actually in a half-closed state,
+ waiting for the server to close its end.) It would be nice to be able
+ to detect this state, so that the Exim process is not held up
+ unnecessarily. However, it seems that we can't. The poll() function
+ does not do the right thing, and in any case it is not always
+ available. */
+
+ while (delay > 0) delay = sleep(delay);
+#endif
}
- else sleep(delay);
}
}
break;
-#ifdef WITH_OLD_DEMIME
- case ACLC_DEMIME:
- rc = demime(&arg);
+ #ifndef DISABLE_DKIM
+ case ACLC_DKIM_SIGNER:
+ if (dkim_cur_signer)
+ rc = match_isinlist(dkim_cur_signer,
+ &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
+ else
+ rc = FAIL;
+ break;
+
+ case ACLC_DKIM_STATUS:
+ rc = match_isinlist(dkim_verify_status,
+ &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
+ break;
+ #endif
+
+#ifdef SUPPORT_DMARC
+ case ACLC_DMARC_STATUS:
+ if (!f.dmarc_has_been_checked)
+ dmarc_process();
+ f.dmarc_has_been_checked = TRUE;
+ /* used long way of dmarc_exim_expand_query() in case we need more
+ * view into the process in the future. */
+ rc = match_isinlist(dmarc_exim_expand_query(DMARC_VERIFY_STATUS),
+ &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
break;
#endif
case ACLC_DNSLISTS:
- rc = verify_check_dnsbl(&arg);
+ rc = verify_check_dnsbl(where, &arg, log_msgptr);
break;
case ACLC_DOMAINS:
rc = match_isinlist(addr->domain, &arg, 0, &domainlist_anchor,
- addr->domain_cache, MCL_DOMAIN, TRUE, &deliver_domain_data);
+ addr->domain_cache, MCL_DOMAIN, TRUE, CUSS &deliver_domain_data);
break;
/* The value in tls_cipher is the full cipher name, for example,
writing is poorly documented. */
case ACLC_ENCRYPTED:
- if (tls_cipher == NULL) rc = FAIL; else
+ if (tls_in.cipher == NULL) rc = FAIL; else
{
uschar *endcipher = NULL;
- uschar *cipher = Ustrchr(tls_cipher, ':');
- if (cipher == NULL) cipher = tls_cipher; else
+ uschar *cipher = Ustrchr(tls_in.cipher, ':');
+ if (cipher == NULL) cipher = tls_in.cipher; else
{
endcipher = Ustrchr(++cipher, ':');
if (endcipher != NULL) *endcipher = 0;
case ACLC_HOSTS:
rc = verify_check_this_host(&arg, sender_host_cache, NULL,
- (sender_host_address == NULL)? US"" : sender_host_address, &host_data);
- if (host_data != NULL) host_data = string_copy_malloc(host_data);
+ (sender_host_address == NULL)? US"" : sender_host_address,
+ CUSS &host_data);
+ if (rc == DEFER) *log_msgptr = search_error_message;
+ if (host_data) host_data = string_copy_perm(host_data, TRUE);
break;
case ACLC_LOCAL_PARTS:
rc = match_isinlist(addr->cc_local_part, &arg, 0,
&localpartlist_anchor, addr->localpart_cache, MCL_LOCALPART, TRUE,
- &deliver_localpart_data);
+ CUSS &deliver_localpart_data);
+ break;
+
+ case ACLC_LOG_REJECT_TARGET:
+ {
+ int logbits = 0;
+ int sep = 0;
+ const uschar *s = arg;
+ uschar * ss;
+ while ((ss = string_nextinlist(&s, &sep, big_buffer, big_buffer_size)))
+ {
+ if (Ustrcmp(ss, "main") == 0) logbits |= LOG_MAIN;
+ else if (Ustrcmp(ss, "panic") == 0) logbits |= LOG_PANIC;
+ else if (Ustrcmp(ss, "reject") == 0) logbits |= LOG_REJECT;
+ else
+ {
+ logbits |= LOG_MAIN|LOG_REJECT;
+ log_write(0, LOG_MAIN|LOG_PANIC, "unknown log name \"%s\" in "
+ "\"log_reject_target\" in %s ACL", ss, acl_wherenames[where]);
+ }
+ }
+ log_reject_target = logbits;
+ }
break;
case ACLC_LOGWRITE:
{
int logbits = 0;
- uschar *s = arg;
+ const uschar *s = arg;
if (*s == ':')
{
s++;
s++;
}
while (isspace(*s)) s++;
+
if (logbits == 0) logbits = LOG_MAIN;
log_write(0, logbits, "%s", string_printing(s));
}
break;
-
-#ifdef WITH_CONTENT_SCAN
- case ACLC_MALWARE:
+
+ #ifdef WITH_CONTENT_SCAN
+ case ACLC_MALWARE: /* Run the malware backend. */
{
- /* Seperate the regular expression and any optional parameters. */
- uschar *ss = string_nextinlist(&arg, &sep, big_buffer, big_buffer_size);
- /* Run the malware backend. */
- rc = malware(&ss);
- /* Modify return code based upon the existance of options. */
- while ((ss = string_nextinlist(&arg, &sep, big_buffer, big_buffer_size))
- != NULL) {
- if (strcmpic(ss, US"defer_ok") == 0 && rc == DEFER)
- {
- /* FAIL so that the message is passed to the next ACL */
- rc = FAIL;
- }
- }
+ /* Separate the regular expression and any optional parameters. */
+ const uschar * list = arg;
+ uschar * ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size);
+ uschar * opt;
+ BOOL defer_ok = FALSE;
+ int timeout = 0;
+
+ while ((opt = string_nextinlist(&list, &sep, NULL, 0)))
+ if (strcmpic(opt, US"defer_ok") == 0)
+ defer_ok = TRUE;
+ else if ( strncmpic(opt, US"tmo=", 4) == 0
+ && (timeout = readconf_readtime(opt+4, '\0', FALSE)) < 0
+ )
+ {
+ *log_msgptr = string_sprintf("bad timeout value in '%s'", opt);
+ return ERROR;
+ }
+
+ rc = malware(ss, timeout);
+ if (rc == DEFER && defer_ok)
+ rc = FAIL; /* FAIL so that the message is passed to the next ACL */
}
break;
case ACLC_MIME_REGEX:
- rc = mime_regex(&arg);
+ rc = mime_regex(&arg);
+ break;
+ #endif
+
+ case ACLC_QUEUE:
+ if (Ustrchr(arg, '/'))
+ {
+ *log_msgptr = string_sprintf(
+ "Directory separator not permitted in queue name: '%s'", arg);
+ return ERROR;
+ }
+ queue_name = string_copy_perm(arg, FALSE);
+ break;
+
+ case ACLC_RATELIMIT:
+ rc = acl_ratelimit(arg, where, log_msgptr);
break;
-#endif
case ACLC_RECIPIENTS:
- rc = match_address_list(addr->address, TRUE, TRUE, &arg, NULL, -1, 0,
- &recipient_data);
+ rc = match_address_list(CUS addr->address, TRUE, TRUE, &arg, NULL, -1, 0,
+ CUSS &recipient_data);
break;
-#ifdef WITH_CONTENT_SCAN
- case ACLC_REGEX:
- rc = regex(&arg);
+ #ifdef WITH_CONTENT_SCAN
+ case ACLC_REGEX:
+ rc = regex(&arg);
+ break;
+ #endif
+
+ case ACLC_REMOVE_HEADER:
+ setup_remove_header(arg);
break;
-#endif
case ACLC_SENDER_DOMAINS:
{
uschar *sdomain;
sdomain = Ustrrchr(sender_address, '@');
- sdomain = (sdomain == NULL)? US"" : sdomain + 1;
+ sdomain = sdomain ? sdomain + 1 : US"";
rc = match_isinlist(sdomain, &arg, 0, &domainlist_anchor,
sender_domain_cache, MCL_DOMAIN, TRUE, NULL);
}
break;
case ACLC_SENDERS:
- rc = match_address_list(sender_address, TRUE, TRUE, &arg,
- sender_address_cache, -1, 0, &sender_data);
+ rc = match_address_list(CUS sender_address, TRUE, TRUE, &arg,
+ sender_address_cache, -1, 0, CUSS &sender_data);
break;
- /* Connection variables must persist forever */
+ /* Connection variables must persist forever; message variables not */
case ACLC_SET:
{
int old_pool = store_pool;
- if (cb->u.varnumber < ACL_C_MAX) store_pool = POOL_PERM;
- acl_var[cb->u.varnumber] = string_copy(arg);
+ if ( cb->u.varname[0] != 'm'
+#ifndef DISABLE_EVENT
+ || event_name /* An event is being delivered */
+#endif
+ )
+ store_pool = POOL_PERM;
+#ifndef DISABLE_DKIM /* Overwriteable dkim result variables */
+ if (Ustrcmp(cb->u.varname, "dkim_verify_status") == 0)
+ dkim_verify_status = string_copy(arg);
+ else if (Ustrcmp(cb->u.varname, "dkim_verify_reason") == 0)
+ dkim_verify_reason = string_copy(arg);
+ else
+#endif
+ acl_var_create(cb->u.varname)->data.ptr = string_copy(arg);
store_pool = old_pool;
}
break;
#ifdef WITH_CONTENT_SCAN
case ACLC_SPAM:
{
- /* Seperate the regular expression and any optional parameters. */
- uschar *ss = string_nextinlist(&arg, &sep, big_buffer, big_buffer_size);
- /* Run the spam backend. */
- rc = spam(&ss);
- /* Modify return code based upon the existance of options. */
- while ((ss = string_nextinlist(&arg, &sep, big_buffer, big_buffer_size))
- != NULL) {
+ /* Separate the regular expression and any optional parameters. */
+ const uschar * list = arg;
+ uschar *ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size);
+
+ rc = spam(CUSS &ss);
+ /* Modify return code based upon the existence of options. */
+ while ((ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
if (strcmpic(ss, US"defer_ok") == 0 && rc == DEFER)
- {
- /* FAIL so that the message is passed to the next ACL */
- rc = FAIL;
- }
- }
+ rc = FAIL; /* FAIL so that the message is passed to the next ACL */
}
break;
#endif
-#ifdef EXPERIMENTAL_SPF
+#ifdef SUPPORT_SPF
case ACLC_SPF:
- rc = spf_process(&arg, sender_address);
+ rc = spf_process(&arg, sender_address, SPF_PROCESS_NORMAL);
+ break;
+ case ACLC_SPF_GUESS:
+ rc = spf_process(&arg, sender_address, SPF_PROCESS_GUESS);
break;
#endif
+ case ACLC_UDPSEND:
+ rc = acl_udpsend(arg, log_msgptr);
+ break;
+
/* If the verb is WARN, discard any user message from verification, because
such messages are SMTP responses, not header additions. The latter come
- only from explicit "message" modifiers. */
+ only from explicit "message" modifiers. However, put the user message into
+ $acl_verify_message so it can be used in subsequent conditions or modifiers
+ (until something changes it). */
case ACLC_VERIFY:
rc = acl_verify(where, addr, arg, user_msgptr, log_msgptr, basic_errno);
+ if (*user_msgptr)
+ acl_verify_message = *user_msgptr;
if (verb == ACL_WARN) *user_msgptr = NULL;
break;
/* If a condition was negated, invert OK/FAIL. */
- if (!cond_modifiers[cb->type] && cb->u.negated)
- {
+ if (!conditions[cb->type].is_modifier && cb->u.negated)
if (rc == OK) rc = FAIL;
- else if (rc == FAIL || rc == FAIL_DROP) rc = OK;
- }
+ else if (rc == FAIL || rc == FAIL_DROP) rc = OK;
if (rc != OK) break; /* Conditions loop */
}
/* If the result is the one for which "message" and/or "log_message" are used,
-handle the values of these options. Most verbs have but a single return for
-which the messages are relevant, but for "discard", it's useful to have the log
-message both when it succeeds and when it fails. Also, for an "accept" that
-appears in a QUIT ACL, we want to handle the user message. Since only "accept"
-and "warn" are permitted in that ACL, we don't need to test the verb.
-
-These modifiers act in different ways:
+handle the values of these modifiers. If there isn't a log message set, we make
+it the same as the user message.
"message" is a user message that will be included in an SMTP response. Unless
it is empty, it overrides any previously set user message.
"log_message" is a non-user message, and it adds to any existing non-user
message that is already set.
-If there isn't a log message set, we make it the same as the user message. */
+Most verbs have but a single return for which the messages are relevant, but
+for "discard", it's useful to have the log message both when it succeeds and
+when it fails. For "accept", the message is used in the OK case if there is no
+"endpass", but (for backwards compatibility) in the FAIL case if "endpass" is
+present. */
+
+if (*epp && rc == OK) user_message = NULL;
-if (((rc == FAIL_DROP)? FAIL : rc) == msgcond[verb] ||
- (verb == ACL_DISCARD && rc == OK) ||
- (where == ACL_WHERE_QUIT))
+if ((BIT(rc) & msgcond[verb]) != 0)
{
uschar *expmessage;
+ uschar *old_user_msgptr = *user_msgptr;
+ uschar *old_log_msgptr = (*log_msgptr != NULL)? *log_msgptr : old_user_msgptr;
/* If the verb is "warn", messages generated by conditions (verification or
- nested ACLs) are discarded. Only messages specified at this level are used.
+ nested ACLs) are always discarded. This also happens for acceptance verbs
+ when they actually do accept. Only messages specified at this level are used.
However, the value of an existing message is available in $acl_verify_message
during expansions. */
- uschar *old_user_msgptr = *user_msgptr;
- uschar *old_log_msgptr = (*log_msgptr != NULL)? *log_msgptr : old_user_msgptr;
+ if (verb == ACL_WARN ||
+ (rc == OK && (verb == ACL_ACCEPT || verb == ACL_DISCARD)))
+ *log_msgptr = *user_msgptr = NULL;
- if (verb == ACL_WARN) *log_msgptr = *user_msgptr = NULL;
-
- if (user_message != NULL)
+ if (user_message)
{
acl_verify_message = old_user_msgptr;
expmessage = expand_string(user_message);
- if (expmessage == NULL)
+ if (!expmessage)
{
- if (!expand_string_forcedfail)
+ if (!f.expand_string_forcedfail)
log_write(0, LOG_MAIN|LOG_PANIC, "failed to expand ACL message \"%s\": %s",
user_message, expand_string_message);
}
else if (expmessage[0] != 0) *user_msgptr = expmessage;
}
- if (log_message != NULL)
+ if (log_message)
{
acl_verify_message = old_log_msgptr;
expmessage = expand_string(log_message);
- if (expmessage == NULL)
+ if (!expmessage)
{
- if (!expand_string_forcedfail)
+ if (!f.expand_string_forcedfail)
log_write(0, LOG_MAIN|LOG_PANIC, "failed to expand ACL message \"%s\": %s",
log_message, expand_string_message);
}
/* If no log message, default it to the user message */
- if (*log_msgptr == NULL) *log_msgptr = *user_msgptr;
+ if (!*log_msgptr) *log_msgptr = *user_msgptr;
}
acl_verify_message = NULL;
if (*acl_text == 0) return NULL; /* No more data */
yield = acl_text; /* Potential data line */
- while (*acl_text != 0 && *acl_text != '\n') acl_text++;
+ while (*acl_text && *acl_text != '\n') acl_text++;
/* If we hit the end before a newline, we have the whole logical line. If
it's a comment, there's no more data to be given. Otherwise, yield it. */
where where called from
addr address item when called from RCPT; otherwise NULL
s the input string; NULL is the same as an empty ACL => DENY
- level the nesting level
user_msgptr where to put a user error (for SMTP response)
log_msgptr where to put a logging message (not for SMTP response)
*/
static int
-acl_check_internal(int where, address_item *addr, uschar *s, int level,
+acl_check_internal(int where, address_item *addr, uschar *s,
uschar **user_msgptr, uschar **log_msgptr)
{
int fd = -1;
/* Catch configuration loops */
-if (level > 20)
+if (acl_level > 20)
{
*log_msgptr = US"ACL nested too deep: possible loop";
return ERROR;
}
-if (s == NULL)
+if (!s)
{
- HDEBUG(D_acl) debug_printf("ACL is NULL: implicit DENY\n");
+ HDEBUG(D_acl) debug_printf_indent("ACL is NULL: implicit DENY\n");
return FAIL;
}
/* At top level, we expand the incoming string. At lower levels, it has already
been expanded as part of condition processing. */
-if (level == 0)
+if (acl_level == 0)
{
- ss = expand_string(s);
- if (ss == NULL)
+ if (!(ss = expand_string(s)))
{
- if (expand_string_forcedfail) return OK;
+ if (f.expand_string_forcedfail) return OK;
*log_msgptr = string_sprintf("failed to expand ACL string \"%s\": %s", s,
expand_string_message);
return ERROR;
}
else ss = s;
-while (isspace(*ss))ss++;
+while (isspace(*ss)) ss++;
/* If we can't find a named ACL, the default is to parse it as an inline one.
(Unless it begins with a slash; non-existent files give rise to an error.) */
if (Ustrchr(ss, ' ') == NULL)
{
- tree_node *t = tree_search(acl_anchor, ss);
- if (t != NULL)
+ tree_node * t = tree_search(acl_anchor, ss);
+ if (t)
{
- acl = (acl_block *)(t->data.ptr);
- if (acl == NULL)
+ if (!(acl = (acl_block *)(t->data.ptr)))
{
- HDEBUG(D_acl) debug_printf("ACL \"%s\" is empty: implicit DENY\n", ss);
+ HDEBUG(D_acl) debug_printf_indent("ACL \"%s\" is empty: implicit DENY\n", ss);
return FAIL;
}
acl_name = string_sprintf("ACL \"%s\"", ss);
- HDEBUG(D_acl) debug_printf("using ACL \"%s\"\n", ss);
+ HDEBUG(D_acl) debug_printf_indent("using ACL \"%s\"\n", ss);
}
else if (*ss == '/')
{
struct stat statbuf;
- fd = Uopen(ss, O_RDONLY, 0);
- if (fd < 0)
+ if (is_tainted(ss))
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "attempt to open tainted ACL file name \"%s\"", ss);
+ /* Avoid leaking info to an attacker */
+ *log_msgptr = US"internal configuration error";
+ return ERROR;
+ }
+ if ((fd = Uopen(ss, O_RDONLY, 0)) < 0)
{
*log_msgptr = string_sprintf("failed to open ACL file \"%s\": %s", ss,
strerror(errno));
return ERROR;
}
-
if (fstat(fd, &statbuf) != 0)
{
*log_msgptr = string_sprintf("failed to fstat ACL file \"%s\": %s", ss,
return ERROR;
}
- acl_text = store_get(statbuf.st_size + 1);
+ /* If the string being used as a filename is tainted, so is the file content */
+ acl_text = store_get(statbuf.st_size + 1, is_tainted(ss));
acl_text_end = acl_text + statbuf.st_size + 1;
if (read(fd, acl_text, statbuf.st_size) != statbuf.st_size)
return ERROR;
}
acl_text[statbuf.st_size] = 0;
- close(fd);
+ (void)close(fd);
acl_name = string_sprintf("ACL \"%s\"", ss);
- HDEBUG(D_acl) debug_printf("read ACL from file %s\n", ss);
+ HDEBUG(D_acl) debug_printf_indent("read ACL from file %s\n", ss);
}
}
in the ACL tree, having read it into the POOL_PERM store pool so that it
persists between multiple messages. */
-if (acl == NULL)
+if (!acl)
{
int old_pool = store_pool;
if (fd >= 0) store_pool = POOL_PERM;
acl = acl_read(acl_getline, log_msgptr);
store_pool = old_pool;
- if (acl == NULL && *log_msgptr != NULL) return ERROR;
+ if (!acl && *log_msgptr) return ERROR;
if (fd >= 0)
{
- tree_node *t = store_get_perm(sizeof(tree_node) + Ustrlen(ss));
+ tree_node *t = store_get_perm(sizeof(tree_node) + Ustrlen(ss), is_tainted(ss));
Ustrcpy(t->name, ss);
t->data.ptr = acl;
(void)tree_insertnode(&acl_anchor, t);
/* Now we have an ACL to use. It's possible it may be NULL. */
-while (acl != NULL)
+while (acl)
{
int cond;
int basic_errno = 0;
BOOL endpass_seen = FALSE;
+ BOOL acl_quit_check = acl_level == 0
+ && (where == ACL_WHERE_QUIT || where == ACL_WHERE_NOTQUIT);
*log_msgptr = *user_msgptr = NULL;
- acl_temp_details = FALSE;
-
- if (where == ACL_WHERE_QUIT &&
- acl->verb != ACL_ACCEPT &&
- acl->verb != ACL_WARN)
- {
- *log_msgptr = string_sprintf("\"%s\" is not allowed in a QUIT ACL",
- verbs[acl->verb]);
- return ERROR;
- }
+ f.acl_temp_details = FALSE;
- HDEBUG(D_acl) debug_printf("processing \"%s\"\n", verbs[acl->verb]);
+ HDEBUG(D_acl) debug_printf_indent("processing \"%s\" (%s %d)\n",
+ verbs[acl->verb], acl->srcfile, acl->srcline);
/* Clear out any search error message from a previous check before testing
this condition. */
search_error_message = NULL;
- cond = acl_check_condition(acl->verb, acl->condition, where, addr, level,
+ cond = acl_check_condition(acl->verb, acl->condition, where, addr, acl_level,
&endpass_seen, user_msgptr, log_msgptr, &basic_errno);
/* Handle special returns: DEFER causes a return except on a WARN verb;
switch (cond)
{
case DEFER:
- HDEBUG(D_acl) debug_printf("%s: condition test deferred\n", verbs[acl->verb]);
- if (basic_errno != ERRNO_CALLOUTDEFER)
- {
- if (search_error_message != NULL && *search_error_message != 0)
- *log_msgptr = search_error_message;
- if (smtp_return_error_details) acl_temp_details = TRUE;
- }
- else
- {
- acl_temp_details = TRUE;
- }
- if (acl->verb != ACL_WARN) return DEFER;
- break;
+ HDEBUG(D_acl) debug_printf_indent("%s: condition test deferred in %s\n",
+ verbs[acl->verb], acl_name);
+ if (basic_errno != ERRNO_CALLOUTDEFER)
+ {
+ if (search_error_message != NULL && *search_error_message != 0)
+ *log_msgptr = search_error_message;
+ if (smtp_return_error_details) f.acl_temp_details = TRUE;
+ }
+ else
+ f.acl_temp_details = TRUE;
+ if (acl->verb != ACL_WARN) return DEFER;
+ break;
default: /* Paranoia */
case ERROR:
- HDEBUG(D_acl) debug_printf("%s: condition test error\n", verbs[acl->verb]);
- return ERROR;
+ HDEBUG(D_acl) debug_printf_indent("%s: condition test error in %s\n",
+ verbs[acl->verb], acl_name);
+ return ERROR;
case OK:
- HDEBUG(D_acl) debug_printf("%s: condition test succeeded\n",
- verbs[acl->verb]);
- break;
+ HDEBUG(D_acl) debug_printf_indent("%s: condition test succeeded in %s\n",
+ verbs[acl->verb], acl_name);
+ break;
case FAIL:
- HDEBUG(D_acl) debug_printf("%s: condition test failed\n", verbs[acl->verb]);
- break;
+ HDEBUG(D_acl) debug_printf_indent("%s: condition test failed in %s\n",
+ verbs[acl->verb], acl_name);
+ break;
/* DISCARD and DROP can happen only from a nested ACL condition, and
DISCARD can happen only for an "accept" or "discard" verb. */
case DISCARD:
- HDEBUG(D_acl) debug_printf("%s: condition test yielded \"discard\"\n",
- verbs[acl->verb]);
- break;
+ HDEBUG(D_acl) debug_printf_indent("%s: condition test yielded \"discard\" in %s\n",
+ verbs[acl->verb], acl_name);
+ break;
case FAIL_DROP:
- HDEBUG(D_acl) debug_printf("%s: condition test yielded \"drop\"\n",
- verbs[acl->verb]);
- break;
+ HDEBUG(D_acl) debug_printf_indent("%s: condition test yielded \"drop\" in %s\n",
+ verbs[acl->verb], acl_name);
+ break;
}
/* At this point, cond for most verbs is either OK or FAIL or (as a result of
switch(acl->verb)
{
case ACL_ACCEPT:
- if (cond == OK || cond == DISCARD) return cond;
- if (endpass_seen)
- {
- HDEBUG(D_acl) debug_printf("accept: endpass encountered - denying access\n");
- return cond;
- }
- break;
+ if (cond == OK || cond == DISCARD)
+ {
+ HDEBUG(D_acl) debug_printf_indent("end of %s: ACCEPT\n", acl_name);
+ return cond;
+ }
+ if (endpass_seen)
+ {
+ HDEBUG(D_acl) debug_printf_indent("accept: endpass encountered - denying access\n");
+ return cond;
+ }
+ break;
case ACL_DEFER:
- if (cond == OK)
- {
- acl_temp_details = TRUE;
- return DEFER;
- }
- break;
+ if (cond == OK)
+ {
+ HDEBUG(D_acl) debug_printf_indent("end of %s: DEFER\n", acl_name);
+ if (acl_quit_check) goto badquit;
+ f.acl_temp_details = TRUE;
+ return DEFER;
+ }
+ break;
case ACL_DENY:
- if (cond == OK) return FAIL;
- break;
+ if (cond == OK)
+ {
+ HDEBUG(D_acl) debug_printf_indent("end of %s: DENY\n", acl_name);
+ if (acl_quit_check) goto badquit;
+ return FAIL;
+ }
+ break;
case ACL_DISCARD:
- if (cond == OK || cond == DISCARD) return DISCARD;
- if (endpass_seen)
- {
- HDEBUG(D_acl) debug_printf("discard: endpass encountered - denying access\n");
- return cond;
- }
- break;
+ if (cond == OK || cond == DISCARD)
+ {
+ HDEBUG(D_acl) debug_printf_indent("end of %s: DISCARD\n", acl_name);
+ if (acl_quit_check) goto badquit;
+ return DISCARD;
+ }
+ if (endpass_seen)
+ {
+ HDEBUG(D_acl)
+ debug_printf_indent("discard: endpass encountered - denying access\n");
+ return cond;
+ }
+ break;
case ACL_DROP:
- if (cond == OK) return FAIL_DROP;
- break;
+ if (cond == OK)
+ {
+ HDEBUG(D_acl) debug_printf_indent("end of %s: DROP\n", acl_name);
+ if (acl_quit_check) goto badquit;
+ return FAIL_DROP;
+ }
+ break;
case ACL_REQUIRE:
- if (cond != OK) return cond;
- break;
+ if (cond != OK)
+ {
+ HDEBUG(D_acl) debug_printf_indent("end of %s: not OK\n", acl_name);
+ if (acl_quit_check) goto badquit;
+ return cond;
+ }
+ break;
case ACL_WARN:
- if (cond == OK)
- acl_warn(where, *user_msgptr, *log_msgptr);
- else if (cond == DEFER)
- acl_warn(where, NULL, string_sprintf("ACL \"warn\" statement skipped: "
- "condition test deferred: %s",
- (*log_msgptr == NULL)? US"" : *log_msgptr));
- *log_msgptr = *user_msgptr = NULL; /* In case implicit DENY follows */
- break;
+ if (cond == OK)
+ acl_warn(where, *user_msgptr, *log_msgptr);
+ else if (cond == DEFER && LOGGING(acl_warn_skipped))
+ log_write(0, LOG_MAIN, "%s Warning: ACL \"warn\" statement skipped: "
+ "condition test deferred%s%s", host_and_ident(TRUE),
+ (*log_msgptr == NULL)? US"" : US": ",
+ (*log_msgptr == NULL)? US"" : *log_msgptr);
+ *log_msgptr = *user_msgptr = NULL; /* In case implicit DENY follows */
+ break;
default:
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "internal ACL error: unknown verb %d",
- acl->verb);
- break;
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "internal ACL error: unknown verb %d",
+ acl->verb);
+ break;
}
/* Pass to the next ACL item */
/* We have reached the end of the ACL. This is an implicit DENY. */
-HDEBUG(D_acl) debug_printf("end of %s: implicit DENY\n", acl_name);
+HDEBUG(D_acl) debug_printf_indent("end of %s: implicit DENY\n", acl_name);
return FAIL;
+
+badquit:
+ *log_msgptr = string_sprintf("QUIT or not-QUIT toplevel ACL may not fail "
+ "('%s' verb used incorrectly)", verbs[acl->verb]);
+ return ERROR;
+}
+
+
+
+
+/* Same args as acl_check_internal() above, but the string s is
+the name of an ACL followed optionally by up to 9 space-separated arguments.
+The name and args are separately expanded. Args go into $acl_arg globals. */
+static int
+acl_check_wargs(int where, address_item *addr, const uschar *s,
+ uschar **user_msgptr, uschar **log_msgptr)
+{
+uschar * tmp;
+uschar * tmp_arg[9]; /* must match acl_arg[] */
+uschar * sav_arg[9]; /* must match acl_arg[] */
+int sav_narg;
+uschar * name;
+int i;
+int ret;
+
+if (!(tmp = string_dequote(&s)) || !(name = expand_string(tmp)))
+ goto bad;
+
+for (i = 0; i < 9; i++)
+ {
+ while (*s && isspace(*s)) s++;
+ if (!*s) break;
+ if (!(tmp = string_dequote(&s)) || !(tmp_arg[i] = expand_string(tmp)))
+ {
+ tmp = name;
+ goto bad;
+ }
+ }
+
+sav_narg = acl_narg;
+acl_narg = i;
+for (i = 0; i < acl_narg; i++)
+ {
+ sav_arg[i] = acl_arg[i];
+ acl_arg[i] = tmp_arg[i];
+ }
+while (i < 9)
+ {
+ sav_arg[i] = acl_arg[i];
+ acl_arg[i++] = NULL;
+ }
+
+acl_level++;
+ret = acl_check_internal(where, addr, name, user_msgptr, log_msgptr);
+acl_level--;
+
+acl_narg = sav_narg;
+for (i = 0; i < 9; i++) acl_arg[i] = sav_arg[i];
+return ret;
+
+bad:
+if (f.expand_string_forcedfail) return ERROR;
+*log_msgptr = string_sprintf("failed to expand ACL string \"%s\": %s",
+ tmp, expand_string_message);
+return f.search_find_defer ? DEFER : ERROR;
}
+
/*************************************************
* Check access using an ACL *
*************************************************/
+/* Alternate interface for ACL, used by expansions */
+int
+acl_eval(int where, uschar *s, uschar **user_msgptr, uschar **log_msgptr)
+{
+address_item adb;
+address_item *addr = NULL;
+int rc;
+
+*user_msgptr = *log_msgptr = NULL;
+sender_verified_failed = NULL;
+ratelimiters_cmd = NULL;
+log_reject_target = LOG_MAIN|LOG_REJECT;
+
+if (where == ACL_WHERE_RCPT)
+ {
+ adb = address_defaults;
+ addr = &adb;
+ addr->address = expand_string(US"$local_part@$domain");
+ addr->domain = deliver_domain;
+ addr->local_part = deliver_localpart;
+ addr->cc_local_part = deliver_localpart;
+ addr->lc_local_part = deliver_localpart;
+ }
+
+acl_level++;
+rc = acl_check_internal(where, addr, s, user_msgptr, log_msgptr);
+acl_level--;
+return rc;
+}
+
+
+
/* This is the external interface for ACL checks. It sets up an address and the
expansions for $domain and $local_part when called after RCPT, then calls
acl_check_internal() to do the actual work.
Arguments:
where ACL_WHERE_xxxx indicating where called from
- data_string RCPT address, or SMTP command argument, or NULL
+ recipient RCPT address for RCPT check, else NULL
s the input string; NULL is the same as an empty ACL => DENY
user_msgptr where to put a user error (for SMTP response)
log_msgptr where to put a logging message (not for SMTP response)
DEFER can't tell at the moment
ERROR disaster
*/
+int acl_where = ACL_WHERE_UNKNOWN;
int
-acl_check(int where, uschar *data_string, uschar *s, uschar **user_msgptr,
+acl_check(int where, uschar *recipient, uschar *s, uschar **user_msgptr,
uschar **log_msgptr)
{
int rc;
address_item adb;
-address_item *addr;
+address_item *addr = NULL;
*user_msgptr = *log_msgptr = NULL;
sender_verified_failed = NULL;
+ratelimiters_cmd = NULL;
+log_reject_target = LOG_MAIN|LOG_REJECT;
-if (where == ACL_WHERE_RCPT)
+#ifndef DISABLE_PRDR
+if (where==ACL_WHERE_RCPT || where==ACL_WHERE_VRFY || where==ACL_WHERE_PRDR)
+#else
+if (where==ACL_WHERE_RCPT || where==ACL_WHERE_VRFY)
+#endif
{
adb = address_defaults;
addr = &adb;
- addr->address = data_string;
+ addr->address = recipient;
if (deliver_split_address(addr) == DEFER)
{
*log_msgptr = US"defer in percent_hack_domains check";
return DEFER;
}
+#ifdef SUPPORT_I18N
+ if ((addr->prop.utf8_msg = message_smtputf8))
+ {
+ addr->prop.utf8_downcvt = message_utf8_downconvert == 1;
+ addr->prop.utf8_downcvt_maybe = message_utf8_downconvert == -1;
+ }
+#endif
deliver_domain = addr->domain;
deliver_localpart = addr->local_part;
}
-else
+
+acl_where = where;
+acl_level = 0;
+rc = acl_check_internal(where, addr, s, user_msgptr, log_msgptr);
+acl_level = 0;
+acl_where = ACL_WHERE_UNKNOWN;
+
+/* Cutthrough - if requested,
+and WHERE_RCPT and not yet opened conn as result of recipient-verify,
+and rcpt acl returned accept,
+and first recipient (cancel on any subsequents)
+open one now and run it up to RCPT acceptance.
+A failed verify should cancel cutthrough request,
+and will pass the fail to the originator.
+Initial implementation: dual-write to spool.
+Assume the rxd datastream is now being copied byte-for-byte to an open cutthrough connection.
+
+Cease cutthrough copy on rxd final dot; do not send one.
+
+On a data acl, if not accept and a cutthrough conn is open, hard-close it (no SMTP niceness).
+
+On data acl accept, terminate the dataphase on an open cutthrough conn. If accepted or
+perm-rejected, reflect that to the original sender - and dump the spooled copy.
+If temp-reject, close the conn (and keep the spooled copy).
+If conn-failure, no action (and keep the spooled copy).
+*/
+switch (where)
{
- addr = NULL;
- smtp_command_argument = data_string;
- }
+ case ACL_WHERE_RCPT:
+#ifndef DISABLE_PRDR
+ case ACL_WHERE_PRDR:
+#endif
+
+ if (f.host_checking_callout) /* -bhc mode */
+ cancel_cutthrough_connection(TRUE, US"host-checking mode");
+
+ else if ( rc == OK
+ && cutthrough.delivery
+ && rcpt_count > cutthrough.nrcpt
+ )
+ {
+ if ((rc = open_cutthrough_connection(addr)) == DEFER)
+ if (cutthrough.defer_pass)
+ {
+ uschar * s = addr->message;
+ /* Horrid kludge to recover target's SMTP message */
+ while (*s) s++;
+ do --s; while (!isdigit(*s));
+ if (*--s && isdigit(*s) && *--s && isdigit(*s)) *user_msgptr = s;
+ f.acl_temp_details = TRUE;
+ }
+ else
+ {
+ HDEBUG(D_acl) debug_printf_indent("cutthrough defer; will spool\n");
+ rc = OK;
+ }
+ }
+ else HDEBUG(D_acl) if (cutthrough.delivery)
+ if (rcpt_count <= cutthrough.nrcpt)
+ debug_printf_indent("ignore cutthrough request; nonfirst message\n");
+ else if (rc != OK)
+ debug_printf_indent("ignore cutthrough request; ACL did not accept\n");
+ break;
+
+ case ACL_WHERE_PREDATA:
+ if (rc == OK)
+ cutthrough_predata();
+ else
+ cancel_cutthrough_connection(TRUE, US"predata acl not ok");
+ break;
+
+ case ACL_WHERE_QUIT:
+ case ACL_WHERE_NOTQUIT:
+ /* Drop cutthrough conns, and drop heldopen verify conns if
+ the previous was not DATA */
+ {
+ uschar prev = smtp_connection_had[smtp_ch_index-2];
+ BOOL dropverify = !(prev == SCH_DATA || prev == SCH_BDAT);
+
+ cancel_cutthrough_connection(dropverify, US"quit or conndrop");
+ break;
+ }
-rc = acl_check_internal(where, addr, s, 0, user_msgptr, log_msgptr);
+ default:
+ break;
+ }
-smtp_command_argument = deliver_domain =
- deliver_localpart = deliver_address_data = sender_address_data = NULL;
+deliver_domain = deliver_localpart = deliver_address_data =
+ deliver_domain_data = sender_address_data = NULL;
/* A DISCARD response is permitted only for message ACLs, excluding the PREDATA
ACL, which is really in the middle of an SMTP command. */
return ERROR;
}
-/* Before giving an error response, take a look at the length of any user
-message, and split it up into multiple lines if possible. */
+/* Before giving a response, take a look at the length of any user message, and
+split it up into multiple lines if possible. */
-if (rc != OK && *user_msgptr != NULL && Ustrlen(*user_msgptr) > 75)
- {
- uschar *s = *user_msgptr = string_copy(*user_msgptr);
- uschar *ss = s;
+*user_msgptr = string_split_message(*user_msgptr);
+if (fake_response != OK)
+ fake_response_text = string_split_message(fake_response_text);
- for (;;)
- {
- int i = 0;
- while (i < 75 && *ss != 0 && *ss != '\n') ss++, i++;
- if (*ss == 0) break;
- if (*ss == '\n')
- s = ++ss;
- else
- {
- uschar *t = ss + 1;
- uschar *tt = NULL;
- while (--t > s + 35)
- {
- if (*t == ' ')
- {
- if (t[-1] == ':') { tt = t; break; }
- if (tt == NULL) tt = t;
- }
- }
+return rc;
+}
- if (tt == NULL) /* Can't split behind - try ahead */
- {
- t = ss + 1;
- while (*t != 0)
- {
- if (*t == ' ' || *t == '\n')
- { tt = t; break; }
- t++;
- }
- }
- if (tt == NULL) break; /* Can't find anywhere to split */
- *tt = '\n';
- s = ss = tt+1;
- }
- }
+/*************************************************
+* Create ACL variable *
+*************************************************/
+
+/* Create an ACL variable or reuse an existing one. ACL variables are in a
+binary tree (see tree.c) with acl_var_c and acl_var_m as root nodes.
+
+Argument:
+ name pointer to the variable's name, starting with c or m
+
+Returns the pointer to variable's tree node
+*/
+
+tree_node *
+acl_var_create(uschar * name)
+{
+tree_node * node, ** root = name[0] == 'c' ? &acl_var_c : &acl_var_m;
+if (!(node = tree_search(*root, name)))
+ {
+ node = store_get(sizeof(tree_node) + Ustrlen(name), is_tainted(name));
+ Ustrcpy(node->name, name);
+ (void)tree_insertnode(root, node);
}
+node->data.ptr = NULL;
+return node;
+}
-return rc;
+
+
+/*************************************************
+* Write an ACL variable in spool format *
+*************************************************/
+
+/* This function is used as a callback for tree_walk when writing variables to
+the spool file. To retain spool file compatibility, what is written is -aclc or
+-aclm followed by the rest of the name and the data length, space separated,
+then the value itself, starting on a new line, and terminated by an additional
+newline. When we had only numbered ACL variables, the first line might look
+like this: "-aclc 5 20". Now it might be "-aclc foo 20" for the variable called
+acl_cfoo.
+
+Arguments:
+ name of the variable
+ value of the variable
+ ctx FILE pointer (as a void pointer)
+
+Returns: nothing
+*/
+
+void
+acl_var_write(uschar *name, uschar *value, void *ctx)
+{
+FILE *f = (FILE *)ctx;
+if (is_tainted(value)) putc('-', f);
+fprintf(f, "-acl%c %s %d\n%s\n", name[0], name+1, Ustrlen(value), value);
}
+/* vi: aw ai sw=2
+*/
/* End of acl.c */
git://git.exim.org / users / heiko / exim.git / blobdiff