Initial work removing PCRE from dist. Documentation needs to be updated. Related...

[users/heiko/exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 5856b3f979b6ef27d9ac4de2b98ed2d38f7be809..b088dea04dd61b4aca98bac0141e05cd66eeea20 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -1,41 +1,58 @@
-. $Cambridge: exim/doc/doc-docbook/spec.xfpt,v 1.14 2007/01/15 15:58:40 ph10 Exp $
+. $Cambridge: exim/doc/doc-docbook/spec.xfpt,v 1.27 2007/12/01 15:53:55 nm4 Exp $

 .
 . /////////////////////////////////////////////////////////////////////////////
 . This is the primary source of the Exim Manual. It is an xfpt document that is
 . converted into DocBook XML for subsequent conversion into printing and online
 . formats. The markup used herein is "standard" xfpt markup, with some extras.
 . The markup is summarized in a file called Markup.txt.
 .
 . /////////////////////////////////////////////////////////////////////////////
 . This is the primary source of the Exim Manual. It is an xfpt document that is
 . converted into DocBook XML for subsequent conversion into printing and online
 . formats. The markup used herein is "standard" xfpt markup, with some extras.
 . The markup is summarized in a file called Markup.txt.

+.
+. WARNING: When you use the .new macro, make sure it appears *before* any
+. adjacent index items; otherwise you get an empty "paragraph" which causes
+. unwanted vertical space.

 . /////////////////////////////////////////////////////////////////////////////
 
 .include stdflags
 .include stdmacs
 . /////////////////////////////////////////////////////////////////////////////
 
 .include stdflags
 .include stdmacs

-.docbook
-.book

 
 . /////////////////////////////////////////////////////////////////////////////
 
 . /////////////////////////////////////////////////////////////////////////////

-. These definitions set some parameters and save some typing. Remember that
-. the <bookinfo> element must also be updated for each new edition.
+. This outputs the standard DocBook boilerplate.

 . /////////////////////////////////////////////////////////////////////////////
 
 . /////////////////////////////////////////////////////////////////////////////
 

-.set ACL "access control lists (ACLs)"
-.set previousversion "4.63"
-.set version "4.66"
-
+.docbook

 
 . /////////////////////////////////////////////////////////////////////////////
 . These lines are processing instructions for the Simple DocBook Processor that
 
 . /////////////////////////////////////////////////////////////////////////////
 . These lines are processing instructions for the Simple DocBook Processor that

-. Philip Hazel is developing in odd moments as a less cumbersome way of making
-. PostScript and PDFs than using xmlto and fop. They will be ignored by all
-. other XML processors.
+. Philip Hazel has developed as a less cumbersome way of making PostScript and
+. PDFs than using xmlto and fop. They will be ignored by all other XML
+. processors.

 . /////////////////////////////////////////////////////////////////////////////
 
 .literal xml
 <?sdop
 . /////////////////////////////////////////////////////////////////////////////
 
 .literal xml
 <?sdop

+  foot_right_recto="&chaptertitle; (&chapternumber;)"
+  foot_right_verso="&chaptertitle; (&chapternumber;)"

   toc_chapter_blanks="yes,yes"
   toc_chapter_blanks="yes,yes"

-  table_warn_soft_overflow="no"
+  table_warn_overflow="overprint"

 ?>
 .literal off
 
 ?>
 .literal off
 

+. /////////////////////////////////////////////////////////////////////////////
+. This generate the outermost <book> element that wraps then entire document.
+. /////////////////////////////////////////////////////////////////////////////
+
+.book
+
+. /////////////////////////////////////////////////////////////////////////////
+. These definitions set some parameters and save some typing. Remember that
+. the <bookinfo> element must also be updated for each new edition.
+. /////////////////////////////////////////////////////////////////////////////
+
+.set previousversion "4.68"
+.set version "4.69"
+
+.set ACL "access control lists (ACLs)"
+.set I   "&nbsp;&nbsp;&nbsp;&nbsp;"
+

 
 . /////////////////////////////////////////////////////////////////////////////
 . Additional xfpt markup used by this document, over and above the default
 
 . /////////////////////////////////////////////////////////////////////////////
 . Additional xfpt markup used by this document, over and above the default


@@ -53,11 +70,18 @@
 .flag &!?      "</emphasis>&Dagger;<emphasis>"
 
 . --- A macro for an Exim option definition heading, generating a one-line
 .flag &!?      "</emphasis>&Dagger;<emphasis>"
 
 . --- A macro for an Exim option definition heading, generating a one-line

-. --- table with four columns.
+. --- table with four columns. For cases when the option name is given with
+. --- a space, so that it can be split, a fifth argument is used for the
+. --- index entry.

 
 .macro option
 
 .macro option

+.arg 5
+.oindex "&%$5%&"
+.endarg
+.arg -5

 .oindex "&%$1%&"
 .oindex "&%$1%&"

-.itable all 0 0 4 8* left 5* center 5* center 6* right
+.endarg
+.itable all 0 0 4 8* left 6* center 6* center 6* right

 .row "&%$1%&" "Use: &'$2'&" "Type: &'$3'&" "Default: &'$4'&"
 .endtable
 .endmacro
 .row "&%$1%&" "Use: &'$2'&" "Type: &'$3'&" "Default: &'$4'&"
 .endtable
 .endmacro


@@ -70,10 +94,28 @@
 .itable none 0 0 2 $1 left $2 left
 .endmacro
 
 .itable none 0 0 2 $1 left $2 left
 .endmacro
 

-. --- Macros for the concept and option index entries. For a "range" style of
-. --- entry, use .scindex for the start and .ecindex for the end. The first
-. --- argument of .scindex and the only argument of .ecindex must be the ID
-. --- that ties them together.
+. --- A macro that generates .row, but puts &I; at the start of the first
+. --- argument, thus indenting it. Assume a minimum of two arguments, and
+. --- allow up to four arguments, which is as many as we'll ever need.
+
+.macro irow
+.arg 4
+.row "&I;$1" "$2" "$3" "$4"
+.endarg
+.arg -4
+.arg 3
+.row "&I;$1" "$2" "$3"
+.endarg
+.arg -3
+.row "&I;$1" "$2"
+.endarg
+.endarg
+.endmacro
+
+. --- Macros for option, variable, and concept index entries. For a "range"
+. --- style of entry, use .scindex for the start and .ecindex for the end. The
+. --- first argument of .scindex and the only argument of .ecindex must be the
+. --- ID that ties them together.

 
 .macro cindex
 &<indexterm role="concept">&
 
 .macro cindex
 &<indexterm role="concept">&


@@ -106,8 +148,17 @@
 &</indexterm>&
 .endmacro
 
 &</indexterm>&
 .endmacro
 

+.macro vindex
+&<indexterm role="variable">&
+&<primary>&$1&</primary>&
+.arg 2
+&<secondary>&$2&</secondary>&
+.endarg
+&</indexterm>&
+.endmacro
+

 .macro index
 .macro index

-.echo "** Don't use .index; use .cindex or .oindex"
+.echo "** Don't use .index; use .cindex or .oindex or .vindex"

 .endmacro
 . ////////////////////////////////////////////////////////////////////////////
 
 .endmacro
 . ////////////////////////////////////////////////////////////////////////////
 


@@ -121,14 +172,14 @@
 <bookinfo>
 <title>Specification of the Exim Mail Transfer Agent</title>
 <titleabbrev>The Exim MTA</titleabbrev>
 <bookinfo>
 <title>Specification of the Exim Mail Transfer Agent</title>
 <titleabbrev>The Exim MTA</titleabbrev>

-<date>08 January 2007</date>
+<date>23 August 2007</date>

 <author><firstname>Philip</firstname><surname>Hazel</surname></author>
 <authorinitials>PH</authorinitials>
 <affiliation><orgname>University of Cambridge Computing Service</orgname></affiliation>
 <address>New Museums Site, Pembroke Street, Cambridge CB2 3QH, England</address>
 <revhistory><revision>
 <author><firstname>Philip</firstname><surname>Hazel</surname></author>
 <authorinitials>PH</authorinitials>
 <affiliation><orgname>University of Cambridge Computing Service</orgname></affiliation>
 <address>New Museums Site, Pembroke Street, Cambridge CB2 3QH, England</address>
 <revhistory><revision>

-  <revnumber>4.66</revnumber>
-  <date>08 January 2007</date>
+  <revnumber>4.68</revnumber>
+  <date>23 August 2007</date>

   <authorinitials>PH</authorinitials>
 </revision></revhistory>
 <copyright><year>2007</year><holder>University of Cambridge</holder></copyright>
   <authorinitials>PH</authorinitials>
 </revision></revhistory>
 <copyright><year>2007</year><holder>University of Cambridge</holder></copyright>


@@ -142,10 +193,10 @@
 . at the top level, so we have to put the .chapter directive first.
 . /////////////////////////////////////////////////////////////////////////////
 
 . at the top level, so we have to put the .chapter directive first.
 . /////////////////////////////////////////////////////////////////////////////
 

-.chapter "Introduction"
+.chapter "Introduction" "CHID1"

 .literal xml
 
 .literal xml
 

-<indexterm role="concept">
+<indexterm role="variable">

   <primary>$1, $2, etc.</primary>
   <see><emphasis>numerical variables</emphasis></see>
 </indexterm>
   <primary>$1, $2, etc.</primary>
   <see><emphasis>numerical variables</emphasis></see>
 </indexterm>


@@ -206,7 +257,7 @@
 </indexterm>
 <indexterm role="concept">
   <primary>maximum</primary>
 </indexterm>
 <indexterm role="concept">
   <primary>maximum</primary>

-  <see><emphasis>limit</emphasis></see>
+  <seealso><emphasis>limit</emphasis></seealso>

 </indexterm>
 <indexterm role="concept">
   <primary>monitor</primary>
 </indexterm>
 <indexterm role="concept">
   <primary>monitor</primary>


@@ -315,7 +366,7 @@ systems. I am grateful to them all. The distribution now contains a file called
 contributors.
 
 
 contributors.
 
 

-.section "Exim documentation"
+.section "Exim documentation" "SECID1"

 .new
 .cindex "documentation"
 This edition of the Exim specification applies to version &version; of Exim.
 .new
 .cindex "documentation"
 This edition of the Exim specification applies to version &version; of Exim.


@@ -336,7 +387,7 @@ very wide interest.
 .cindex "books about Exim"
 An &"easier"& discussion of Exim which provides more in-depth explanatory,
 introductory, and tutorial material can be found in a book entitled &'The Exim
 .cindex "books about Exim"
 An &"easier"& discussion of Exim which provides more in-depth explanatory,
 introductory, and tutorial material can be found in a book entitled &'The Exim

-SMTP Mail Server'&, published by UIT Cambridge
+SMTP Mail Server'& (second edition, 2007), published by UIT Cambridge

 (&url(http://www.uit.co.uk/exim-book/)).
 
 This book also contains a chapter that gives a general introduction to SMTP and
 (&url(http://www.uit.co.uk/exim-book/)).
 
 This book also contains a chapter that gives a general introduction to SMTP and


@@ -347,9 +398,7 @@ published by O'Reilly, covers Exim 3, and many things have changed in Exim 4.)
 .cindex "Debian" "information sources"
 If you are using a Debian distribution of Exim, you will find information about
 Debian-specific features in the file
 .cindex "Debian" "information sources"
 If you are using a Debian distribution of Exim, you will find information about
 Debian-specific features in the file

-.display
-&_/usr/share/doc/exim4-base/README.Debian_&
-.endd
+&_/usr/share/doc/exim4-base/README.Debian_&.

 The command &(man update-exim.conf)& is another source of Debian-specific
 information.
 
 The command &(man update-exim.conf)& is another source of Debian-specific
 information.
 


@@ -393,7 +442,7 @@ available in other formats (HTML, PostScript, PDF, and Texinfo). Section
 
 
 
 
 
 

-.section "FTP and web sites"
+.section "FTP and web sites" "SECID2"

 .cindex "web site"
 .cindex "FTP site"
 The primary site for Exim source distributions is currently the University of
 .cindex "web site"
 .cindex "FTP site"
 The primary site for Exim source distributions is currently the University of


@@ -406,23 +455,27 @@ Squared, formerly Planet Online Ltd, whose support I gratefully acknowledge.
 .cindex "wiki"
 .cindex "FAQ"
 As well as Exim distribution tar files, the Exim web site contains a number of
 .cindex "wiki"
 .cindex "FAQ"
 As well as Exim distribution tar files, the Exim web site contains a number of

-differently formatted versions of the documentation, including the FAQ in both
-text and HTML formats. The HTML version comes with a keyword-in-context index.
-A recent addition to the online information is the Exim wiki
-(&url(http://www.exim.org/eximwiki/)). We hope that this will make it easier
-for Exim users to contribute examples, tips, and know-how for the benefit of
-others.
+differently formatted versions of the documentation. A recent addition to the
+online information is the Exim wiki &new("(&url(http://wiki.exim.org))"),
+which contains what used to be a separate FAQ, as well as various other
+examples, tips, and know-how that have been contributed by Exim users.

 
 

+.cindex Bugzilla
+An Exim Bugzilla exists at &new("&url(http://bugs.exim.org)"). You can use
+this to report bugs, and also to add items to the wish list. Please search
+first to check that you are not duplicating a previous entry.

 
 
 
 

-.section "Mailing lists"
+
+.section "Mailing lists" "SECID3"

 .cindex "mailing lists" "for Exim users"
 .cindex "mailing lists" "for Exim users"

-The following are the three main Exim mailing lists:
+The following Exim mailing lists exist:

 
 .table2 140pt
 
 .table2 140pt

-.row &'exim-users@exim.org'&      "general discussion list"
-.row &'exim-dev@exim.org'&        "discussion of bugs, enhancements, etc."
-.row &'exim-announce@exim.org'&   "moderated, low volume announcements list"
+.row &'exim-users@exim.org'&      "General discussion list"
+.row &'exim-dev@exim.org'&        "Discussion of bugs, enhancements, etc."
+.row &'exim-announce@exim.org'&   "Moderated, low volume announcements list"
+.row &'exim-future@exim.org'&     "Discussion of long-term development"

 .endtable
 
 You can subscribe to these lists, change your existing subscriptions, and view
 .endtable
 
 You can subscribe to these lists, change your existing subscriptions, and view


@@ -437,20 +490,20 @@ via this web page:
 Please ask Debian-specific questions on this list and not on the general Exim
 lists.
 
 Please ask Debian-specific questions on this list and not on the general Exim
 lists.
 

-.section "Exim training"
+.section "Exim training" "SECID4"

 .cindex "training courses"
 .cindex "training courses"

-From time to time (approximately annually at the time of writing), training
-courses are run by the author of Exim in Cambridge, UK. Details of any
-forthcoming courses can be found on the web site
-&url(http://www-tus.csx.cam.ac.uk/courses/exim/).
-
+Training courses in Cambridge (UK) used to be run annually by the author of
+Exim, before he retired. At the time of writing, there are no plans to run
+further Exim courses in Cambridge. However, if that changes, relevant
+information will be posted at &url(http://www-tus.csx.cam.ac.uk/courses/exim/).

 
 

-.section "Bug reports"
+.section "Bug reports" "SECID5"

 .cindex "bug reports"
 .cindex "reporting bugs"
 .cindex "bug reports"
 .cindex "reporting bugs"

-Reports of obvious bugs should be emailed to &'bugs@exim.org'&. However, if you
-are unsure whether some behaviour is a bug or not, the best thing to do is to
-post a message to the &'exim-dev'& mailing list and have it discussed.
+Reports of obvious bugs &new("can be emailed to &'bugs@exim.org'& or reported
+via the Bugzilla (&url(http://bugs.exim.org)).") However, if you are unsure
+whether some behaviour is a bug or not, the best thing to do is to post a
+message to the &'exim-dev'& mailing list and have it discussed.

 
 
 
 
 
 


@@ -508,37 +561,9 @@ inside the &_exim4_& directory of the FTP site:
 .endd
 These tar files contain only the &_doc_& directory, not the complete
 distribution, and are also available in &_.bz2_& as well as &_.gz_& forms.
 .endd
 These tar files contain only the &_doc_& directory, not the complete
 distribution, and are also available in &_.bz2_& as well as &_.gz_& forms.

-.cindex "FAQ"
-The FAQ is available for downloading in two different formats in these files:
-.display
-&_exim4/FAQ.txt.gz_&
-&_exim4/FAQ.html.tar.gz_&
-.endd
-The first of these is a single ASCII file that can be searched with a text
-editor. The second is a directory of HTML files, normally accessed by starting
-at &_index.html_&. The HTML version of the FAQ (which is also included in the
-HTML documentation tarbundle) includes a keyword-in-context index, which is
-often the most convenient way of finding your way around.

 
 
 
 

-.section "Wish list"
-.cindex "wish list"
-A wish list is maintained, containing ideas for new features that have been
-submitted. This used to be a single file that from time to time was exported to
-the ftp site into the file &_exim4/WishList_&. However, it has now been
-imported into Exim's Bugzilla data.
-
-
-.section "Contributed material"
-.cindex "contributed material"
-At the ftp site, there is a directory called &_Contrib_& that contains
-miscellaneous files contributed to the Exim community by Exim users. There is
-also a collection of contributed configuration examples in
-&_exim4/config.samples.tar.gz_&. These samples are referenced from the FAQ.
-
-
-
-.section "Limitations"
+.section "Limitations" "SECID6"

 .ilist
 .cindex "limitations of Exim"
 .cindex "bang paths" "not handled by Exim"
 .ilist
 .cindex "limitations of Exim"
 .cindex "bang paths" "not handled by Exim"


@@ -578,7 +603,7 @@ a number of common scanners are provided.
 .endlist
 
 
 .endlist
 
 

-.section "Run time configuration"
+.section "Run time configuration" "SECID7"

 Exim's run time configuration is held in a single text file that is divided
 into a number of sections. The entries in this file consist of keywords and
 values, in the style of Smail 3 configuration files. A default configuration
 Exim's run time configuration is held in a single text file that is divided
 into a number of sections. The entries in this file consist of keywords and
 values, in the style of Smail 3 configuration files. A default configuration


@@ -586,7 +611,7 @@ file which is suitable for simple online installations is provided in the
 distribution, and is described in chapter &<<CHAPdefconfil>>& below.
 
 
 distribution, and is described in chapter &<<CHAPdefconfil>>& below.
 
 

-.section "Calling interface"
+.section "Calling interface" "SECID8"

 .cindex "Sendmail compatibility" "command line interface"
 Like many MTAs, Exim has adopted the Sendmail command line interface so that it
 can be a straight replacement for &_/usr/lib/sendmail_& or
 .cindex "Sendmail compatibility" "command line interface"
 Like many MTAs, Exim has adopted the Sendmail command line interface so that it
 can be a straight replacement for &_/usr/lib/sendmail_& or


@@ -606,7 +631,7 @@ interface to Exim's command line administration options.
 
 
 
 
 
 

-.section "Terminology"
+.section "Terminology" "SECID9"

 .cindex "terminology definitions"
 .cindex "body of message" "definition of"
 The &'body'& of a message is the actual data that the sender wants to transmit.
 .cindex "terminology definitions"
 .cindex "body of message" "definition of"
 The &'body'& of a message is the actual data that the sender wants to transmit.


@@ -636,7 +661,7 @@ The word &'domain'& is sometimes used to mean all but the first component of a
 host's name. It is &'not'& used in that sense here, where it normally refers to
 the part of an email address following the @ sign.
 
 host's name. It is &'not'& used in that sense here, where it normally refers to
 the part of an email address following the @ sign.
 

-.cindex "envelope" "definition of"
+.cindex "envelope, definition of"

 .cindex "sender" "definition of"
 A message in transit has an associated &'envelope'&, as well as a header and a
 body. The envelope contains a sender address (to which bounce messages should
 .cindex "sender" "definition of"
 A message in transit has an associated &'envelope'&, as well as a header and a
 body. The envelope contains a sender address (to which bounce messages should


@@ -645,7 +670,7 @@ sender or the recipients of a message usually mean the addresses in the
 envelope. An MTA uses these addresses for delivery, and for returning bounce
 messages, not the addresses that appear in the header lines.
 
 envelope. An MTA uses these addresses for delivery, and for returning bounce
 messages, not the addresses that appear in the header lines.
 

-.cindex "message header" "definition of"
+.cindex "message" "header, definition of"

 .cindex "header section" "definition of"
 The &'header'& of a message is the first part of a message's text, consisting
 of a number of lines, each of which has a name such as &'From:'&, &'To:'&,
 .cindex "header section" "definition of"
 The &'header'& of a message is the first part of a message's text, consisting
 of a number of lines, each of which has a name such as &'From:'&, &'To:'&,


@@ -660,7 +685,7 @@ part of an email address that precedes the @ sign. The part that follows the
 @ sign is called the &'domain'& or &'mail domain'&.
 
 .cindex "local delivery" "definition of"
 @ sign is called the &'domain'& or &'mail domain'&.
 
 .cindex "local delivery" "definition of"

-.cindex "remote delivery" "definition of"
+.cindex "remote delivery, definition of"

 The terms &'local delivery'& and &'remote delivery'& are used to distinguish
 delivery to a file or a pipe on the local host from delivery by SMTP over
 TCP/IP to another host. As far as Exim is concerned, all hosts other than the
 The terms &'local delivery'& and &'remote delivery'& are used to distinguish
 delivery to a file or a pipe on the local host from delivery by SMTP over
 TCP/IP to another host. As far as Exim is concerned, all hosts other than the


@@ -697,7 +722,7 @@ the Exim documentation, &"spool"& is always used in the first sense.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "Incorporated code"
+.chapter "Incorporated code" "CHID2"

 .cindex "incorporated code"
 .cindex "regular expressions" "library"
 .cindex "PCRE"
 .cindex "incorporated code"
 .cindex "regular expressions" "library"
 .cindex "PCRE"


@@ -709,9 +734,10 @@ monitor using the freely-distributable PCRE library, copyright &copy;
 University of Cambridge. The source is distributed in the directory
 &_src/pcre_&. However, this is a cut-down version of PCRE. If you want to use
 the PCRE library in other programs, you should obtain and install the full
 University of Cambridge. The source is distributed in the directory
 &_src/pcre_&. However, this is a cut-down version of PCRE. If you want to use
 the PCRE library in other programs, you should obtain and install the full

-version from &url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre).
+version of the library from
+&url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre).

 .next
 .next

-.cindex "cdb" "acknowledgement"
+.cindex "cdb" "acknowledgment"

 Support for the cdb (Constant DataBase) lookup method is provided by code
 contributed by Nigel Metheringham of (at the time he contributed it) Planet
 Online Ltd. The implementation is completely contained within the code of Exim.
 Support for the cdb (Constant DataBase) lookup method is provided by code
 contributed by Nigel Metheringham of (at the time he contributed it) Planet
 Online Ltd. The implementation is completely contained within the code of Exim.


@@ -725,12 +751,11 @@ This program is free software; you can redistribute it and/or modify it under
 the terms of the GNU General Public License as published by the Free Software
 Foundation; either version 2 of the License, or (at your option) any later
 version.
 the terms of the GNU General Public License as published by the Free Software
 Foundation; either version 2 of the License, or (at your option) any later
 version.

-

 This code implements Dan Bernstein's Constant DataBase (cdb) spec. Information,
 the spec and sample code for cdb can be obtained from
 This code implements Dan Bernstein's Constant DataBase (cdb) spec. Information,
 the spec and sample code for cdb can be obtained from

-&url(http://www.pobox.com/~djb/cdb.html). This implementation borrows some
-code from Dan Bernstein's implementation (which has no license restrictions
-applied to it).
+&url(http://www.pobox.com/~djb/cdb.html). This implementation borrows
+some code from Dan Bernstein's implementation (which has no license
+restrictions applied to it).

 .endblockquote
 .next
 .cindex "SPA authentication"
 .endblockquote
 .next
 .cindex "SPA authentication"


@@ -795,7 +820,7 @@ OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .endblockquote
 
 .next
 .endblockquote
 
 .next

-.cindex "Exim monitor" "acknowledgement"
+.cindex "Exim monitor" "acknowledgment"

 .cindex "X-windows"
 .cindex "Athena"
 The Exim Monitor program, which is an X-Window application, includes
 .cindex "X-windows"
 .cindex "Athena"
 The Exim Monitor program, which is an X-Window application, includes


@@ -829,7 +854,7 @@ SOFTWARE.
 .next
 Many people have contributed code fragments, some large, some small, that were
 not covered by any specific licence requirements. It is assumed that the
 .next
 Many people have contributed code fragments, some large, some small, that were
 not covered by any specific licence requirements. It is assumed that the

-contributors are happy to see their code incoporated into Exim under the GPL.
+contributors are happy to see their code incorporated into Exim under the GPL.

 .endlist
 
 
 .endlist
 
 


@@ -839,11 +864,11 @@ contributors are happy to see their code incoporated into Exim under the GPL.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "How Exim receives and delivers mail" "" &&&
+.chapter "How Exim receives and delivers mail" "CHID11" &&&

          "Receiving and delivering mail"
 
 
          "Receiving and delivering mail"
 
 

-.section "Overall philosophy"
+.section "Overall philosophy" "SECID10"

 .cindex "design philosophy"
 Exim is designed to work efficiently on systems that are permanently connected
 to the Internet and are handling a general mix of mail. In such circumstances,
 .cindex "design philosophy"
 Exim is designed to work efficiently on systems that are permanently connected
 to the Internet and are handling a general mix of mail. In such circumstances,


@@ -853,7 +878,7 @@ it does try to send several messages in a single SMTP connection after a host
 has been down, and it also maintains per-host retry information.
 
 
 has been down, and it also maintains per-host retry information.
 
 

-.section "Policy control"
+.section "Policy control" "SECID11"

 .cindex "policy control" "overview"
 Policy controls are now an important feature of MTAs that are connected to the
 Internet. Perhaps their most important job is to stop MTAs being abused as
 .cindex "policy control" "overview"
 Policy controls are now an important feature of MTAs that are connected to the
 Internet. Perhaps their most important job is to stop MTAs being abused as


@@ -882,7 +907,7 @@ spam scanning software. The result of such a scan is passed back to the ACL,
 which can then use it to decide what to do with the message.
 .next
 When a message has been received, either from a remote host or from the local
 which can then use it to decide what to do with the message.
 .next
 When a message has been received, either from a remote host or from the local

-host, but before the final acknowledgement has been sent, a locally supplied C
+host, but before the final acknowledgment has been sent, a locally supplied C

 function called &[local_scan()]& can be run to inspect the message and decide
 whether to accept it or not (see chapter &<<CHAPlocalscan>>&). If the message
 is accepted, the list of recipients can be modified by the function.
 function called &[local_scan()]& can be run to inspect the message and decide
 whether to accept it or not (see chapter &<<CHAPlocalscan>>&). If the message
 is accepted, the list of recipients can be modified by the function.


@@ -898,7 +923,7 @@ runs at the start of every delivery process.
 
 
 
 
 
 

-.section "User filters"
+.section "User filters" "SECID12"

 .cindex "filter" "introduction"
 .cindex "Sieve filter"
 In a conventional Exim configuration, users are able to run private filters by
 .cindex "filter" "introduction"
 .cindex "Sieve filter"
 In a conventional Exim configuration, users are able to run private filters by


@@ -956,7 +981,7 @@ received the message.
 .next
 There are two different possibilities for the final two characters:
 .olist
 .next
 There are two different possibilities for the final two characters:
 .olist

-.cindex "&%localhost_number%&"
+.oindex "&%localhost_number%&"

 If &%localhost_number%& is not set, this value is the fractional part of the
 time of reception, normally in units of 1/2000 of a second, but for systems
 that must use base 36 instead of base 62 (because of case-insensitive file
 If &%localhost_number%& is not set, this value is the fractional part of the
 time of reception, normally in units of 1/2000 of a second, but for systems
 that must use base 36 instead of base 62 (because of case-insensitive file


@@ -975,7 +1000,7 @@ pid, it is guaranteed that the time will be different. In most cases, the clock
 will already have ticked while the message was being received.
 
 
 will already have ticked while the message was being received.
 
 

-.section "Receiving mail"
+.section "Receiving mail" "SECID13"

 .cindex "receiving mail"
 .cindex "message" "reception"
 The only way Exim can receive mail from another host is using SMTP over
 .cindex "receiving mail"
 .cindex "message" "reception"
 The only way Exim can receive mail from another host is using SMTP over


@@ -1008,7 +1033,7 @@ in the same way as connections from other hosts.
 .endlist
 
 
 .endlist
 
 

-.cindex "message sender" "constructed by Exim"
+.cindex "message sender, constructed by Exim"

 .cindex "sender" "constructed by Exim"
 In the three cases that do not involve TCP/IP, the sender address is
 constructed from the login name of the user that called Exim and a default
 .cindex "sender" "constructed by Exim"
 In the three cases that do not involve TCP/IP, the sender address is
 constructed from the login name of the user that called Exim and a default


@@ -1041,7 +1066,7 @@ message is received.
 
 
 
 
 
 

-.section "Handling an incoming message"
+.section "Handling an incoming message" "SECID14"

 .cindex "spool directory" "files that hold a message"
 .cindex "file" "how a message is held"
 When Exim accepts a message, it writes two files in its spool directory. The
 .cindex "spool directory" "files that hold a message"
 .cindex "file" "how a message is held"
 When Exim accepts a message, it writes two files in its spool directory. The


@@ -1082,7 +1107,7 @@ delivered (see chapters &<<CHAProutergeneric>>& and
 
 
 
 
 
 

-.section "Life of a message"
+.section "Life of a message" "SECID15"

 .cindex "message" "life of"
 .cindex "message" "frozen"
 A message remains in the spool directory until it is completely delivered to
 .cindex "message" "life of"
 .cindex "message" "frozen"
 A message remains in the spool directory until it is completely delivered to


@@ -1099,8 +1124,8 @@ corrected, and can also freeze individual messages by hand if necessary. In
 addition, an administrator can force a delivery error, causing a bounce message
 to be sent.
 
 addition, an administrator can force a delivery error, causing a bounce message
 to be sent.
 

-.cindex "&%timeout_frozen_after%&"
-.cindex "&%ignore_bounce_errors_after%&"
+.oindex "&%timeout_frozen_after%&"
+.oindex "&%ignore_bounce_errors_after%&"

 There are options called &%ignore_bounce_errors_after%& and
 &%timeout_frozen_after%&, which discard frozen messages after a certain time.
 The first applies only to frozen bounces, the second to any frozen messages.
 There are options called &%ignore_bounce_errors_after%& and
 &%timeout_frozen_after%&, which discard frozen messages after a certain time.
 The first applies only to frozen bounces, the second to any frozen messages.


@@ -1207,7 +1232,7 @@ the address is bounced.
 
 
 
 
 
 

-.section "Processing an address for verification"
+.section "Processing an address for verification" "SECID16"

 .cindex "router" "for verification"
 .cindex "verifying address" "overview"
 As well as being used to decide how to deliver to an address, Exim's routers
 .cindex "router" "for verification"
 .cindex "verifying address" "overview"
 As well as being used to decide how to deliver to an address, Exim's routers


@@ -1242,7 +1267,7 @@ the following:
 &'accept'&: The router accepts the address, and either assigns it to a
 transport, or generates one or more &"child"& addresses. Processing the
 original address ceases,
 &'accept'&: The router accepts the address, and either assigns it to a
 transport, or generates one or more &"child"& addresses. Processing the
 original address ceases,

-.cindex "&%unseen%& option"
+.oindex "&%unseen%&"

 unless the &%unseen%& option is set on the router. This option
 can be used to set up multiple deliveries with different routing (for example,
 for keeping archive copies of messages). When &%unseen%& is set, the address is
 unless the &%unseen%& option is set on the router. This option
 can be used to set up multiple deliveries with different routing (for example,
 for keeping archive copies of messages). When &%unseen%& is set, the address is


@@ -1293,9 +1318,9 @@ when the relevant conditions are met. The &(redirect)& router has a &"fail"&
 facility for this purpose.
 
 
 facility for this purpose.
 
 

-.section "Duplicate addresses"
+.section "Duplicate addresses" "SECID17"

 .cindex "case of local parts"
 .cindex "case of local parts"

-.cindex "address duplicate" "discarding"
+.cindex "address duplicate, discarding"

 .cindex "duplicate addresses"
 Once routing is complete, Exim scans the addresses that are assigned to local
 and remote transports, and discards any duplicates that it finds. During this
 .cindex "duplicate addresses"
 Once routing is complete, Exim scans the addresses that are assigned to local
 and remote transports, and discards any duplicates that it finds. During this


@@ -1306,7 +1331,7 @@ routed addresses are shown.
 
 
 .section "Router preconditions" "SECTrouprecon"
 
 
 .section "Router preconditions" "SECTrouprecon"

-.cindex "router preconditions" "order of processing"
+.cindex "router" "preconditions, order of processing"

 .cindex "preconditions" "order of processing"
 The preconditions that are tested for each router are listed below, in the
 order in which they are tested. The individual configuration options are
 .cindex "preconditions" "order of processing"
 The preconditions that are tested for each router are listed below, in the
 order in which they are tested. The individual configuration options are


@@ -1344,9 +1369,9 @@ check an address given in the SMTP EXPN command (see the &%expn%& option).
 If the &%domains%& option is set, the domain of the address must be in the set
 of domains that it defines.
 .next
 If the &%domains%& option is set, the domain of the address must be in the set
 of domains that it defines.
 .next

-.cindex "&$local_part_prefix$&"
-.cindex "&$local_part$&"
-.cindex "&$local_part_suffix$&"
+.vindex "&$local_part_prefix$&"
+.vindex "&$local_part$&"
+.vindex "&$local_part_suffix$&"

 If the &%local_parts%& option is set, the local part of the address must be in
 the set of local parts that it defines. If &%local_part_prefix%& or
 &%local_part_suffix%& is in use, the prefix or suffix is removed from the local
 If the &%local_parts%& option is set, the local part of the address must be in
 the set of local parts that it defines. If &%local_part_prefix%& or
 &%local_part_suffix%& is in use, the prefix or suffix is removed from the local


@@ -1355,9 +1380,9 @@ that include affixes, you can do so by using a &%condition%& option (see below)
 that uses the variables &$local_part$&, &$local_part_prefix$&, and
 &$local_part_suffix$& as necessary.
 .next
 that uses the variables &$local_part$&, &$local_part_prefix$&, and
 &$local_part_suffix$& as necessary.
 .next

-.cindex "&$local_user_uid$&"
-.cindex "&$local_user_gid$&"
-.cindex "&$home$&"
+.vindex "&$local_user_uid$&"
+.vindex "&$local_user_gid$&"
+.vindex "&$home$&"

 If the &%check_local_user%& option is set, the local part must be the name of
 an account on the local host. If this check succeeds, the uid and gid of the
 local user are placed in &$local_user_uid$& and &$local_user_gid$& and the
 If the &%check_local_user%& option is set, the local part must be the name of
 an account on the local host. If this check succeeds, the uid and gid of the
 local user are placed in &$local_user_uid$& and &$local_user_gid$& and the


@@ -1393,7 +1418,7 @@ example, &_.procmailrc_&).
 
 
 
 
 
 

-.section "Delivery in detail"
+.section "Delivery in detail" "SECID18"

 .cindex "delivery" "in detail"
 When a message is to be delivered, the sequence of events is as follows:
 
 .cindex "delivery" "in detail"
 When a message is to be delivered, the sequence of events is as follows:
 


@@ -1485,7 +1510,7 @@ deleted, though the message log can optionally be preserved if required.
 
 
 
 
 
 

-.section "Retry mechanism"
+.section "Retry mechanism" "SECID19"

 .cindex "delivery" "retry mechanism"
 .cindex "retry" "description of mechanism"
 .cindex "queue runner"
 .cindex "delivery" "retry mechanism"
 .cindex "retry" "description of mechanism"
 .cindex "queue runner"


@@ -1508,7 +1533,7 @@ as permanent.
 
 
 
 
 
 

-.section "Temporary delivery failure"
+.section "Temporary delivery failure" "SECID20"

 .cindex "delivery" "temporary failure"
 There are many reasons why a message may not be immediately deliverable to a
 particular address. Failure to connect to a remote machine (because it, or the
 .cindex "delivery" "temporary failure"
 There are many reasons why a message may not be immediately deliverable to a
 particular address. Failure to connect to a remote machine (because it, or the


@@ -1534,7 +1559,7 @@ one connection.
 
 
 
 
 
 

-.section "Permanent delivery failure"
+.section "Permanent delivery failure" "SECID21"

 .cindex "delivery" "permanent failure"
 .cindex "bounce message" "when generated"
 When a message cannot be delivered to some or all of its intended recipients, a
 .cindex "delivery" "permanent failure"
 .cindex "bounce message" "when generated"
 When a message cannot be delivered to some or all of its intended recipients, a


@@ -1562,7 +1587,7 @@ of the list.
 
 
 
 
 
 

-.section "Failures to deliver bounce messages"
+.section "Failures to deliver bounce messages" "SECID22"

 .cindex "bounce message" "failure to deliver"
 If a bounce message (either locally generated or received from a remote host)
 itself suffers a permanent delivery failure, the message is left on the queue,
 .cindex "bounce message" "failure to deliver"
 If a bounce message (either locally generated or received from a remote host)
 itself suffers a permanent delivery failure, the message is left on the queue,


@@ -1578,35 +1603,36 @@ for only a short time (see &%timeout_frozen_after%& and
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "Building and installing Exim"
+.chapter "Building and installing Exim" "CHID3"

 .scindex IIDbuex "building Exim"
 
 .scindex IIDbuex "building Exim"
 

-.section "Unpacking"
-Exim is distributed as a gzipped or bzipped tar file which, when upacked,
+.section "Unpacking" "SECID23"
+Exim is distributed as a gzipped or bzipped tar file which, when unpacked,

 creates a directory with the name of the current release (for example,
 &_exim-&version;_&) into which the following files are placed:
 
 .table2 140pt
 creates a directory with the name of the current release (for example,
 &_exim-&version;_&) into which the following files are placed:
 
 .table2 140pt

-.row &_ACKNOWLEDGMENTS_& "contains some acknowledgments"
-.row &_CHANGES_&         "contains a reference to where changes are documented"
-.row &_LICENCE_&         "the GNU General Public Licence"
-.row &_Makefile_&        "top-level make file"
-.row &_NOTICE_&          "conditions for the use of Exim"
-.row &_README_&          "list of files, directories and simple build &&&
-                          instructions"
+.irow &_ACKNOWLEDGMENTS_& "contains some acknowledgments"
+.irow &_CHANGES_&         "contains a reference to where changes are &&&
+  documented"
+.irow &_LICENCE_&         "the GNU General Public Licence"
+.irow &_Makefile_&        "top-level make file"
+.irow &_NOTICE_&          "conditions for the use of Exim"
+.irow &_README_&          "list of files, directories and simple build &&&
+  instructions"

 .endtable
 
 Other files whose names begin with &_README_& may also be present. The
 following subdirectories are created:
 
 .table2 140pt
 .endtable
 
 Other files whose names begin with &_README_& may also be present. The
 following subdirectories are created:
 
 .table2 140pt

-.row &_Local_&           "an empty directory for local configuration files"
-.row &_OS_&              "OS-specific files"
-.row &_doc_&             "documentation files"
-.row &_exim_monitor_&    "source files for the Exim monitor"
-.row &_scripts_&         "scripts used in the build process"
-.row &_src_&             "remaining source files"
-.row &_util_&            "independent utilities"
+.irow &_Local_&           "an empty directory for local configuration files"
+.irow &_OS_&              "OS-specific files"
+.irow &_doc_&             "documentation files"
+.irow &_exim_monitor_&    "source files for the Exim monitor"
+.irow &_scripts_&         "scripts used in the build process"
+.irow &_src_&             "remaining source files"
+.irow &_util_&            "independent utilities"

 .endtable
 
 The main utility programs are contained in the &_src_& directory, and are built
 .endtable
 
 The main utility programs are contained in the &_src_& directory, and are built


@@ -1614,7 +1640,7 @@ with the Exim binary. The &_util_& directory contains a few optional scripts
 that may be useful to some sites.
 
 
 that may be useful to some sites.
 
 

-.section "Multiple machine architectures and operating systems"
+.section "Multiple machine architectures and operating systems" "SECID24"

 .cindex "building Exim" "multiple OS/architectures"
 The building process for Exim is arranged to make it easy to build binaries for
 a number of different architectures and operating systems from the same set of
 .cindex "building Exim" "multiple OS/architectures"
 The building process for Exim is arranged to make it easy to build binaries for
 a number of different architectures and operating systems from the same set of


@@ -1637,9 +1663,9 @@ databases. Unfortunately, there are a number of DBM libraries in existence, and
 different operating systems often have different ones installed.
 
 .cindex "Solaris" "DBM library for"
 different operating systems often have different ones installed.
 
 .cindex "Solaris" "DBM library for"

-.cindex "IRIX" "DBM library for"
-.cindex "BSD" "DBM library for"
-.cindex "Linux" "DBM library for"
+.cindex "IRIX, DBM library for"
+.cindex "BSD, DBM library for"
+.cindex "Linux, DBM library for"

 If you are using Solaris, IRIX, one of the modern BSD systems, or a modern
 Linux distribution, the DBM configuration should happen automatically, and you
 may be able to ignore this section. Otherwise, you may have to learn more than
 If you are using Solaris, IRIX, one of the modern BSD systems, or a modern
 Linux distribution, the DBM configuration should happen automatically, and you
 may be able to ignore this section. Otherwise, you may have to learn more than


@@ -1651,7 +1677,7 @@ via the &'ndbm'& interface, and this is what Exim expects by default. Free
 versions of Unix seem to vary in what they contain as standard. In particular,
 some early versions of Linux have no default DBM library, and different
 distributors have chosen to bundle different libraries with their packaged
 versions of Unix seem to vary in what they contain as standard. In particular,
 some early versions of Linux have no default DBM library, and different
 distributors have chosen to bundle different libraries with their packaged

-versions. However, the more recent releases seem to have standardised on the
+versions. However, the more recent releases seem to have standardized on the

 Berkeley DB library.
 
 Different DBM libraries have different conventions for naming the files they
 Berkeley DB library.
 
 Different DBM libraries have different conventions for naming the files they


@@ -1730,7 +1756,7 @@ file &_doc/dbm.discuss.txt_& in the Exim distribution.
 
 
 
 
 
 

-.section "Pre-building configuration"
+.section "Pre-building configuration" "SECID25"

 .cindex "building Exim" "pre-building configuration"
 .cindex "configuration for building Exim"
 .cindex "&_Local/Makefile_&"
 .cindex "building Exim" "pre-building configuration"
 .cindex "configuration for building Exim"
 .cindex "&_Local/Makefile_&"


@@ -1786,7 +1812,7 @@ do this.
 
 
 
 
 
 

-.section "Support for iconv()"
+.section "Support for iconv()" "SECID26"

 .cindex "&[iconv()]& support"
 .cindex "RFC 2047"
 The contents of header lines in messages may be encoded according to the rules
 .cindex "&[iconv()]& support"
 .cindex "RFC 2047"
 The contents of header lines in messages may be encoded according to the rules


@@ -1859,8 +1885,8 @@ given in chapter &<<CHAPTLS>>&.
 
 
 
 
 
 

-.section "Use of tcpwrappers"
-.cindex "tcpwrappers" "building Exim to support"
+.section "Use of tcpwrappers" "SECID27"
+.cindex "tcpwrappers, building Exim to support"

 .cindex "USE_TCP_WRAPPERS"
 Exim can be linked with the &'tcpwrappers'& library in order to check incoming
 SMTP calls using the &'tcpwrappers'& control files. This may be a convenient
 .cindex "USE_TCP_WRAPPERS"
 Exim can be linked with the &'tcpwrappers'& library in order to check incoming
 SMTP calls using the &'tcpwrappers'& control files. This may be a convenient


@@ -1888,7 +1914,7 @@ further details.
 
 
 
 
 
 

-.section "Including support for IPv6"
+.section "Including support for IPv6" "SECID28"

 .cindex "IPv6" "including support for"
 Exim contains code for use on systems that have IPv6 support. Setting
 &`HAVE_IPV6=YES`& in &_Local/Makefile_& causes the IPv6 code to be included;
 .cindex "IPv6" "including support for"
 Exim contains code for use on systems that have IPv6 support. Setting
 &`HAVE_IPV6=YES`& in &_Local/Makefile_& causes the IPv6 code to be included;


@@ -1897,7 +1923,7 @@ where the IPv6 support is not fully integrated into the normal include and
 library files.
 
 Two different types of DNS record for handling IPv6 addresses have been
 library files.
 
 Two different types of DNS record for handling IPv6 addresses have been

-defined. AAAA records (analagous to A records for IPv4) are in use, and are
+defined. AAAA records (analogous to A records for IPv4) are in use, and are

 currently seen as the mainstream. Another record type called A6 was proposed
 as better than AAAA because it had more flexibility. However, it was felt to be
 over-complex, and its status was reduced to &"experimental"&. It is not known
 currently seen as the mainstream. Another record type called A6 was proposed
 as better than AAAA because it had more flexibility. However, it was felt to be
 over-complex, and its status was reduced to &"experimental"&. It is not known


@@ -1907,7 +1933,7 @@ support has not been tested for some time.
 
 
 
 
 
 

-.section "The building process"
+.section "The building process" "SECID29"

 .cindex "build directory"
 Once &_Local/Makefile_& (and &_Local/eximon.conf_&, if required) have been
 created, run &'make'& at the top level. It determines the architecture and
 .cindex "build directory"
 Once &_Local/Makefile_& (and &_Local/eximon.conf_&, if required) have been
 created, run &'make'& at the top level. It determines the architecture and


@@ -1935,7 +1961,7 @@ FAQ, where some common problems are covered.
 
 
 
 
 
 

-.section 'Output from &"make"&'
+.section 'Output from &"make"&' "SECID283"

 The output produced by the &'make'& process for compile lines is often very
 unreadable, because these lines can be very long. For this reason, the normal
 output is suppressed by default, and instead output similar to that which
 The output produced by the &'make'& process for compile lines is often very
 unreadable, because these lines can be very long. For this reason, the normal
 output is suppressed by default, and instead output similar to that which


@@ -1952,7 +1978,7 @@ given in addition to the short output.
 
 
 .section "Overriding build-time options for Exim" "SECToverride"
 
 
 .section "Overriding build-time options for Exim" "SECToverride"

-.cindex "build-time options" "overriding"
+.cindex "build-time options, overriding"

 The main make file that is created at the beginning of the building process
 consists of the concatenation of a number of files which set configuration
 values, followed by a fixed set of &'make'& instructions. If a value is set
 The main make file that is created at the beginning of the building process
 consists of the concatenation of a number of files which set configuration
 values, followed by a fixed set of &'make'& instructions. If a value is set


@@ -2053,7 +2079,7 @@ EXIM_PERL=perl.o
 must be defined in &_Local/Makefile_&. Details of this facility are given in
 chapter &<<CHAPperl>>&.
 
 must be defined in &_Local/Makefile_&. Details of this facility are given in
 chapter &<<CHAPperl>>&.
 

-.cindex "X11 libraries" "location of"
+.cindex "X11 libraries, location of"

 The location of the X11 libraries is something that varies a lot between
 operating systems, and there may be different versions of X11 to cope
 with. Exim itself makes no use of X11, but if you are compiling the Exim
 The location of the X11 libraries is something that varies a lot between
 operating systems, and there may be different versions of X11 to cope
 with. Exim itself makes no use of X11, but if you are compiling the Exim


@@ -2095,7 +2121,7 @@ necessary to touch the associated non-optional file (that is,
 &_Local/Makefile_& or &_Local/eximon.conf_&) before rebuilding.
 
 
 &_Local/Makefile_& or &_Local/eximon.conf_&) before rebuilding.
 
 

-.section "OS-specific header files"
+.section "OS-specific header files" "SECID30"

 .cindex "&_os.h_&"
 .cindex "building Exim" "OS-specific C header files"
 The &_OS_& directory contains a number of files with names of the form
 .cindex "&_os.h_&"
 .cindex "building Exim" "OS-specific C header files"
 The &_OS_& directory contains a number of files with names of the form


@@ -2106,8 +2132,8 @@ are porting Exim to a new operating system.
 
 
 
 
 
 

-.section "Overriding build-time options for the monitor"
-.cindex "building Eximon" "overriding default options"
+.section "Overriding build-time options for the monitor" "SECID31"
+.cindex "building Eximon"

 A similar process is used for overriding things when building the Exim monitor,
 where the files that are involved are
 .display
 A similar process is used for overriding things when building the Exim monitor,
 where the files that are involved are
 .display


@@ -2128,7 +2154,7 @@ LOG_DEPTH at run time.
 .ecindex IIDbuex
 
 
 .ecindex IIDbuex
 
 

-.section "Installing Exim binaries and scripts"
+.section "Installing Exim binaries and scripts" "SECID32"

 .cindex "installing Exim"
 .cindex "BIN_DIRECTORY"
 The command &`make install`& runs the &(exim_install)& script with no
 .cindex "installing Exim"
 .cindex "BIN_DIRECTORY"
 The command &`make install`& runs the &(exim_install)& script with no


@@ -2253,7 +2279,7 @@ install`& automatically builds the info files and installs them.
 
 
 
 
 
 

-.section "Setting up the spool directory"
+.section "Setting up the spool directory" "SECID33"

 .cindex "spool directory" "creating"
 When it starts up, Exim tries to create its spool directory if it does not
 exist. The Exim uid and gid are used for the owner and group of the spool
 .cindex "spool directory" "creating"
 When it starts up, Exim tries to create its spool directory if it does not
 exist. The Exim uid and gid are used for the owner and group of the spool


@@ -2263,7 +2289,7 @@ necessary.
 
 
 
 
 
 

-.section "Testing"
+.section "Testing" "SECID34"

 .cindex "testing" "installation"
 Having installed Exim, you can check that the run time configuration file is
 syntactically valid by running the following command, which assumes that the
 .cindex "testing" "installation"
 Having installed Exim, you can check that the run time configuration file is
 syntactically valid by running the following command, which assumes that the


@@ -2344,7 +2370,7 @@ that Exim uses can be altered, in order to keep it entirely clear of the
 production version.
 
 
 production version.
 
 

-.section "Replacing another MTA with Exim"
+.section "Replacing another MTA with Exim" "SECID35"

 .cindex "replacing another MTA"
 Building and installing Exim for the first time does not of itself put it in
 general use. The name by which the system's MTA is called by mail user agents
 .cindex "replacing another MTA"
 Building and installing Exim for the first time does not of itself put it in
 general use. The name by which the system's MTA is called by mail user agents


@@ -2358,7 +2384,7 @@ a symbolic link to the &'exim'& binary. It is a good idea to remove any setuid
 privilege and executable status from the old MTA. It is then necessary to stop
 and restart the mailer daemon, if one is running.
 
 privilege and executable status from the old MTA. It is then necessary to stop
 and restart the mailer daemon, if one is running.
 

-.cindex "FreeBSD" "MTA indirection"
+.cindex "FreeBSD, MTA indirection"

 .cindex "&_/etc/mail/mailer.conf_&"
 Some operating systems have introduced alternative ways of switching MTAs. For
 example, if you are running FreeBSD, you need to edit the file
 .cindex "&_/etc/mail/mailer.conf_&"
 Some operating systems have introduced alternative ways of switching MTAs. For
 example, if you are running FreeBSD, you need to edit the file


@@ -2384,7 +2410,7 @@ use of Exim's filtering capabilities, you should make the document entitled
 
 
 
 
 
 

-.section "Upgrading Exim"
+.section "Upgrading Exim" "SECID36"

 .cindex "upgrading Exim"
 If you are already running Exim on your host, building and installing a new
 version automatically makes it available to MUAs, or any other programs that
 .cindex "upgrading Exim"
 If you are already running Exim on your host, building and installing a new
 version automatically makes it available to MUAs, or any other programs that


@@ -2397,7 +2423,7 @@ configuration file.
 
 
 
 
 
 

-.section "Stopping the Exim daemon on Solaris"
+.section "Stopping the Exim daemon on Solaris" "SECID37"

 .cindex "Solaris" "stopping Exim on"
 The standard command for stopping the mailer daemon on Solaris is
 .code
 .cindex "Solaris" "stopping Exim on"
 The standard command for stopping the mailer daemon on Solaris is
 .code


@@ -2434,7 +2460,7 @@ combinations of options do not make sense, and provoke an error if used.
 The form of the arguments depends on which options are set.
 
 
 The form of the arguments depends on which options are set.
 
 

-.section "Setting options by program name"
+.section "Setting options by program name" "SECID38"

 .cindex "&'mailq'&"
 If Exim is called under the name &'mailq'&, it behaves as if the option &%-bp%&
 were present before any other options.
 .cindex "&'mailq'&"
 If Exim is called under the name &'mailq'&, it behaves as if the option &%-bp%&
 were present before any other options.


@@ -2479,7 +2505,7 @@ EXIM_GROUP in &_Local/Makefile_& or set by the &%exim_user%& and
 &%exim_group%& options. These do not necessarily have to use the name &"exim"&.
 
 .ilist
 &%exim_group%& options. These do not necessarily have to use the name &"exim"&.
 
 .ilist

-.cindex "trusted user" "definition of"
+.cindex "trusted users" "definition of"

 .cindex "user" "trusted definition of"
 The trusted users are root, the Exim user, any user listed in the
 &%trusted_users%& configuration option, and any user whose current group or any
 .cindex "user" "trusted definition of"
 The trusted users are root, the Exim user, any user listed in the
 &%trusted_users%& configuration option, and any user whose current group or any


@@ -2537,7 +2563,7 @@ getting root. There is further discussion of this issue at the start of chapter
 
 
 
 
 
 

-.section "Command line options"
+.section "Command line options" "SECID39"

 Exim's command line options are described in alphabetical order below. If none
 of the options that specifies a specific action (such as starting the daemon or
 a queue runner, or testing an address, or receiving a message in a specific
 Exim's command line options are described in alphabetical order below. If none
 of the options that specifies a specific action (such as starting the daemon or
 a queue runner, or testing an address, or receiving a message in a specific


@@ -2581,7 +2607,7 @@ clean; it ignores this option.
 .vitem &%-bd%&
 .oindex "&%-bd%&"
 .cindex "daemon"
 .vitem &%-bd%&
 .oindex "&%-bd%&"
 .cindex "daemon"

-.cindex "SMTP listener"
+.cindex "SMTP" "listener"

 .cindex "queue runner"
 This option runs Exim as a daemon, awaiting incoming SMTP connections. Usually
 the &%-bd%& option is combined with the &%-q%&<&'time'&> option, to specify
 .cindex "queue runner"
 This option runs Exim as a daemon, awaiting incoming SMTP connections. Usually
 the &%-bd%& option is combined with the &%-q%&<&'time'&> option, to specify


@@ -2646,14 +2672,13 @@ continuation lines is ignored. Each argument or data line is passed through the
 string expansion mechanism, and the result is output. Variable values from the
 configuration file (for example, &$qualify_domain$&) are available, but no
 message-specific values (such as &$sender_domain$&) are set, because no message
 string expansion mechanism, and the result is output. Variable values from the
 configuration file (for example, &$qualify_domain$&) are available, but no
 message-specific values (such as &$sender_domain$&) are set, because no message

-is being processed &new("(but see &%-bem%& and &%-Mset%&)").
+is being processed (but see &%-bem%& and &%-Mset%&).

 
 &*Note*&: If you use this mechanism to test lookups, and you change the data
 files or databases you are using, you must exit and restart Exim before trying
 the same lookup again. Otherwise, because each Exim process caches the results
 of lookups, you will just get the same result as before.
 
 
 &*Note*&: If you use this mechanism to test lookups, and you change the data
 files or databases you are using, you must exit and restart Exim before trying
 the same lookup again. Otherwise, because each Exim process caches the results
 of lookups, you will just get the same result as before.
 

-.new

 .vitem &%-bem%&&~<&'filename'&>
 .oindex "&%-bem%&"
 .cindex "testing" "string expansion"
 .vitem &%-bem%&&~<&'filename'&>
 .oindex "&%-bem%&"
 .cindex "testing" "string expansion"


@@ -2671,7 +2696,6 @@ recipients are read from the headers in the normal way, and are shown in the
 &$recipients$& variable. Note that recipients cannot be given on the command
 line, because further arguments are taken as strings to expand (just like
 &%-be%&).
 &$recipients$& variable. Note that recipients cannot be given on the command
 line, because further arguments are taken as strings to expand (just like
 &%-be%&).

-.wen

 
 .vitem &%-bF%&&~<&'filename'&>
 .oindex "&%-bF%&"
 
 .vitem &%-bF%&&~<&'filename'&>
 .oindex "&%-bF%&"


@@ -2720,7 +2744,7 @@ separate document entitled &'Exim's interfaces to mail filtering'&.
 When testing a filter file,
 .cindex "&""From""& line"
 .cindex "envelope sender"
 When testing a filter file,
 .cindex "&""From""& line"
 .cindex "envelope sender"

-.cindex "&%-f%& option" "for filter testing"
+.oindex "&%-f%&" "for filter testing"

 the envelope sender can be set by the &%-f%& option,
 or by a &"From&~"& line at the start of the test message. Various parameters
 that would normally be taken from the envelope recipient address of the message
 the envelope sender can be set by the &%-f%& option,
 or by a &"From&~"& line at the start of the test message. Various parameters
 that would normally be taken from the envelope recipient address of the message


@@ -2729,7 +2753,7 @@ options).
 
 .vitem &%-bfd%&&~<&'domain'&>
 .oindex "&%-bfd%&"
 
 .vitem &%-bfd%&&~<&'domain'&>
 .oindex "&%-bfd%&"

-.cindex "&$qualify_domain$&"
+.vindex "&$qualify_domain$&"

 This sets the domain of the recipient address when a filter file is being
 tested by means of the &%-bf%& option. The default is the value of
 &$qualify_domain$&.
 This sets the domain of the recipient address when a filter file is being
 tested by means of the &%-bf%& option. The default is the value of
 &$qualify_domain$&.


@@ -2802,11 +2826,10 @@ The &'exim_checkaccess'& utility is a &"packaged"& version of &%-bh%& whose
 output just states whether a given recipient address from a given host is
 acceptable or not. See section &<<SECTcheckaccess>>&.
 
 output just states whether a given recipient address from a given host is
 acceptable or not. See section &<<SECTcheckaccess>>&.
 

-.new

 Features such as authentication and encryption, where the client input is not
 Features such as authentication and encryption, where the client input is not

-plain text, are most easily tested using specialized SMTP test programs such as
+plain text, cannot easily be tested with &%-bh%&. Instead, you should use a
+specialized SMTP test program such as

 &url(http://jetmore.org/john/code/#swaks,swaks).
 &url(http://jetmore.org/john/code/#swaks,swaks).

-.wen

 
 .vitem &%-bhc%&&~<&'IP&~address'&>
 .oindex "&%-bhc%&"
 
 .vitem &%-bhc%&&~<&'IP&~address'&>
 .oindex "&%-bhc%&"


@@ -2873,16 +2896,15 @@ authoritative specification of the format of this line. Exim recognizes it by
 matching against the regular expression defined by the &%uucp_from_pattern%&
 option, which can be changed if necessary.
 
 matching against the regular expression defined by the &%uucp_from_pattern%&
 option, which can be changed if necessary.
 

-The
-.cindex "&%-f%& option" "overriding &""From""& line"
-specified sender is treated as if it were given as the argument to the
+.oindex "&%-f%&" "overriding &""From""& line"
+The specified sender is treated as if it were given as the argument to the

 &%-f%& option, but if a &%-f%& option is also present, its argument is used in
 preference to the address taken from the message. The caller of Exim must be a
 trusted user for the sender of a message to be set in this way.
 
 .vitem &%-bnq%&
 .oindex "&%-bnq%&"
 &%-f%& option, but if a &%-f%& option is also present, its argument is used in
 preference to the address taken from the message. The caller of Exim must be a
 trusted user for the sender of a message to be set in this way.
 
 .vitem &%-bnq%&
 .oindex "&%-bnq%&"

-.cindex "address qualification" "suppressing"
+.cindex "address qualification, suppressing"

 By default, Exim automatically qualifies unqualified addresses (those
 without domains) that appear in messages that are submitted locally (that
 is, not over TCP/IP). This qualification applies both to addresses in
 By default, Exim automatically qualifies unqualified addresses (those
 without domains) that appear in messages that are submitted locally (that
 is, not over TCP/IP). This qualification applies both to addresses in


@@ -2913,6 +2935,9 @@ arguments, for example:
 .code
 exim -bP qualify_domain hold_domains
 .endd
 .code
 exim -bP qualify_domain hold_domains
 .endd

+.cindex "hiding configuration option values"
+.cindex "configuration options" "hiding value of"
+.cindex "options" "hiding value of"

 However, any option setting that is preceded by the word &"hide"& in the
 configuration file is not shown in full, except to an admin user. For other
 users, the output is as in this example:
 However, any option setting that is preceded by the word &"hide"& in the
 configuration file is not shown in full, except to an admin user. For other
 users, the output is as in this example:


@@ -3136,10 +3161,10 @@ the listening daemon.
 .cindex "testing" "addresses"
 .cindex "address" "testing"
 This option runs Exim in address testing mode, in which each argument is taken
 .cindex "testing" "addresses"
 .cindex "address" "testing"
 This option runs Exim in address testing mode, in which each argument is taken

-as an address to be tested for deliverability. The results are written to the
-standard output. If a test fails, and the caller is not an admin user, no
-details of the failure are output, because these might contain sensitive
-information such as usernames and passwords for database lookups.
+as a recipient address to be tested for deliverability. The results are
+written to the standard output. If a test fails, and the caller is not an admin
+user, no details of the failure are output, because these might contain
+sensitive information such as usernames and passwords for database lookups.

 
 If no arguments are given, Exim runs in an interactive manner, prompting with a
 right angle bracket for addresses to be tested.
 
 If no arguments are given, Exim runs in an interactive manner, prompting with a
 right angle bracket for addresses to be tested.


@@ -3155,9 +3180,8 @@ written to the standard output. However, any router that has
 genuine routing tests if your first router passes everything to a scanner
 program.
 
 genuine routing tests if your first router passes everything to a scanner
 program.
 

-The

 .cindex "return code" "for &%-bt%&"
 .cindex "return code" "for &%-bt%&"

-return code is 2 if any address failed outright; it is 1 if no address
+The return code is 2 if any address failed outright; it is 1 if no address

 failed outright but at least one could not be resolved for some reason. Return
 code 0 is given only when all addresses succeed.
 
 failed outright but at least one could not be resolved for some reason. Return
 code 0 is given only when all addresses succeed.
 


@@ -3170,7 +3194,7 @@ always shown.
 &*Warning*&: &%-bt%& can only do relatively simple testing. If any of the
 routers in the configuration makes any tests on the sender address of a
 message,
 &*Warning*&: &%-bt%& can only do relatively simple testing. If any of the
 routers in the configuration makes any tests on the sender address of a
 message,

-.cindex "&%-f%& option" "for address testing"
+.oindex "&%-f%&" "for address testing"

 you can use the &%-f%& option to set an appropriate sender when running
 &%-bt%& tests. Without it, the sender is assumed to be the calling user at the
 default qualifying domain. However, if you have set up (for example) routers
 you can use the &%-f%& option to set an appropriate sender when running
 &%-bt%& tests. Without it, the sender is assumed to be the calling user at the
 default qualifying domain. However, if you have set up (for example) routers


@@ -3180,7 +3204,7 @@ doing such tests.
 
 .vitem &%-bV%&
 .oindex "&%-bV%&"
 
 .vitem &%-bV%&
 .oindex "&%-bV%&"

-.cindex "version number of Exim" "verifying"
+.cindex "version number of Exim"

 This option causes Exim to write the current version number, compilation
 number, and compilation date of the &'exim'& binary to the standard output.
 It also lists the DBM library this is being used, the optional modules (such as
 This option causes Exim to write the current version number, compilation
 number, and compilation date of the &'exim'& binary to the standard output.
 It also lists the DBM library this is being used, the optional modules (such as


@@ -3200,11 +3224,11 @@ dynamic testing facilities.
 .cindex "verifying address" "using &%-bv%&"
 .cindex "address" "verification"
 This option runs Exim in address verification mode, in which each argument is
 .cindex "verifying address" "using &%-bv%&"
 .cindex "address" "verification"
 This option runs Exim in address verification mode, in which each argument is

-taken as an address to be verified by the routers. (This does not involve any
-verification callouts). During normal operation, verification happens mostly as
-a consequence processing a &%verify%& condition in an ACL (see chapter
-&<<CHAPACL>>&). If you want to test an entire ACL, possibly including callouts,
-see the &%-bh%& and &%-bhc%& options.
+taken as a recipient address to be verified by the routers. (This does
+not involve any verification callouts). During normal operation, verification
+happens mostly as a consequence processing a &%verify%& condition in an ACL
+(see chapter &<<CHAPACL>>&). If you want to test an entire ACL, possibly
+including callouts, see the &%-bh%& and &%-bhc%& options.

 
 If verification fails, and the caller is not an admin user, no details of the
 failure are output, because these might contain sensitive information such as
 
 If verification fails, and the caller is not an admin user, no details of the
 failure are output, because these might contain sensitive information such as


@@ -3223,7 +3247,6 @@ router that has &%fail_verify%& set, verification fails. The address is
 verified as a recipient if &%-bv%& is used; to test verification for a sender
 address, &%-bvs%& should be used.
 
 verified as a recipient if &%-bv%& is used; to test verification for a sender
 address, &%-bvs%& should be used.
 

-.new

 If the &%-v%& option is not set, the output consists of a single line for each
 address, stating whether it was verified or not, and giving a reason in the
 latter case. Without &%-v%&, generating more than one address by redirection
 If the &%-v%& option is not set, the output consists of a single line for each
 address, stating whether it was verified or not, and giving a reason in the
 latter case. Without &%-v%&, generating more than one address by redirection


@@ -3235,7 +3258,6 @@ to succeed.
 When &%-v%& is set, more details are given of how the address has been handled,
 and in the case of address redirection, all the generated addresses are also
 considered. Verification may succeed for some and fail for others.
 When &%-v%& is set, more details are given of how the address has been handled,
 and in the case of address redirection, all the generated addresses are also
 considered. Verification may succeed for some and fail for others.

-.wen

 
 The
 .cindex "return code" "for &%-bv%&"
 
 The
 .cindex "return code" "for &%-bv%&"


@@ -3337,9 +3359,9 @@ exim '-D ABC = something' ...
 This option causes debugging information to be written to the standard
 error stream. It is restricted to admin users because debugging output may show
 database queries that contain password information. Also, the details of users'
 This option causes debugging information to be written to the standard
 error stream. It is restricted to admin users because debugging output may show
 database queries that contain password information. Also, the details of users'

-filter files should be protected. &new("If a non-admin user uses &%-d%&, Exim
+filter files should be protected. If a non-admin user uses &%-d%&, Exim

 writes an error message to the standard error stream and exits with a non-zero
 writes an error message to the standard error stream and exits with a non-zero

-return code.")
+return code.

 
 When &%-d%& is used, &%-v%& is assumed. If &%-d%& is given on its own, a lot of
 standard debugging data is output. This can be reduced, or increased to include
 
 When &%-d%& is used, &%-v%& is assumed. If &%-d%& is given on its own, a lot of
 standard debugging data is output. This can be reduced, or increased to include


@@ -3390,8 +3412,8 @@ is included, an awful lot of output that is very rarely of interest is
 generated, so it now has to be explicitly requested. However, &`-all`& does
 turn everything off.
 
 generated, so it now has to be explicitly requested. However, &`-all`& does
 turn everything off.
 

-.cindex "resolver" "debugging output"
-.cindex "DNS resolver" "debugging output"
+.cindex "resolver, debugging output"
+.cindex "DNS resolver, debugging output"

 The &`resolver`& option produces output only if the DNS resolver was compiled
 with DEBUG enabled. This is not the case in some operating systems. Also,
 unfortunately, debugging output from the DNS resolver is written to stdout
 The &`resolver`& option produces output only if the DNS resolver was compiled
 with DEBUG enabled. This is not the case in some operating systems. Also,
 unfortunately, debugging output from the DNS resolver is written to stdout


@@ -3456,7 +3478,7 @@ between &%-F%& and the <&'string'&> is optional.
 .oindex "&%-f%&"
 .cindex "sender" "address"
 .cindex "address" "sender"
 .oindex "&%-f%&"
 .cindex "sender" "address"
 .cindex "address" "sender"

-.cindex "trusted user"
+.cindex "trusted users"

 .cindex "envelope sender"
 .cindex "user" "trusted"
 This option sets the address of the envelope sender of a locally-generated
 .cindex "envelope sender"
 .cindex "user" "trusted"
 This option sets the address of the envelope sender of a locally-generated


@@ -3511,7 +3533,7 @@ headers.)
 .vitem &%-i%&
 .oindex "&%-i%&"
 .cindex "Solaris" "&'mail'& command"
 .vitem &%-i%&
 .oindex "&%-i%&"
 .cindex "Solaris" "&'mail'& command"

-.cindex "dot in incoming" "non-SMTP message"
+.cindex "dot" "in incoming non-SMTP message"

 This option, which has the same effect as &%-oi%&, specifies that a dot on a
 line by itself should not terminate an incoming, non-SMTP message. I can find
 no documentation for this option in Solaris 2.4 Sendmail, but the &'mailx'&
 This option, which has the same effect as &%-oi%&, specifies that a dot on a
 line by itself should not terminate an incoming, non-SMTP message. I can find
 no documentation for this option in Solaris 2.4 Sendmail, but the &'mailx'&


@@ -3677,7 +3699,6 @@ the messages are active, their status is not altered. This option can be used
 only by an admin user or by the user who originally caused the message to be
 placed on the queue.
 
 only by an admin user or by the user who originally caused the message to be
 placed on the queue.
 

-.new

 .vitem &%-Mset%&&~<&'message&~id'&>
 .oindex "&%-Mset%&
 .cindex "testing" "string expansion"
 .vitem &%-Mset%&&~<&'message&~id'&>
 .oindex "&%-Mset%&
 .cindex "testing" "string expansion"


@@ -3689,7 +3710,6 @@ the test expansions, thus setting message-specific variables such as
 available. This feature is provided to make it easier to test expansions that
 make use of these variables. However, this option can be used only by an admin
 user. See also &%-bem%&.
 available. This feature is provided to make it easier to test expansions that
 make use of these variables. However, this option can be used only by an admin
 user. See also &%-bem%&.

-.wen

 
 .vitem &%-Mt%&&~<&'message&~id'&>&~<&'message&~id'&>&~...
 .oindex "&%-Mt%&"
 
 .vitem &%-Mt%&&~<&'message&~id'&>&~<&'message&~id'&>&~...
 .oindex "&%-Mt%&"


@@ -3709,6 +3729,14 @@ by an admin user.
 This option causes the contents of the message body (-D) spool file to be
 written to the standard output. This option can be used only by an admin user.
 
 This option causes the contents of the message body (-D) spool file to be
 written to the standard output. This option can be used only by an admin user.
 

+.vitem &%-Mvc%&&~<&'message&~id'&>
+.oindex "&%-Mvc%&"
+.cindex "message" "listing in RFC 2822 format"
+.cindex "listing" "message in RFC 2922 format"
+This option causes a copy of the complete message (header lines plus body) to
+be written to the standard output in RFC 2822 format. This option can be used
+only by an admin user.
+

 .vitem &%-Mvh%&&~<&'message&~id'&>
 .oindex "&%-Mvh%&"
 .cindex "listing" "message headers"
 .vitem &%-Mvh%&&~<&'message&~id'&>
 .oindex "&%-Mvh%&"
 .cindex "listing" "message headers"


@@ -3900,7 +3928,7 @@ effect as &%-oem%&.
 
 .vitem &%-oi%&
 .oindex "&%-oi%&"
 
 .vitem &%-oi%&
 .oindex "&%-oi%&"

-.cindex "dot in incoming" "non-SMTP message"
+.cindex "dot" "in incoming non-SMTP message"

 This option, which has the same effect as &%-i%&, specifies that a dot on a
 line by itself should not terminate an incoming, non-SMTP message. Otherwise, a
 single dot does terminate, though Exim does no special processing for other
 This option, which has the same effect as &%-i%&, specifies that a dot on a
 line by itself should not terminate an incoming, non-SMTP message. Otherwise, a
 single dot does terminate, though Exim does no special processing for other


@@ -3913,7 +3941,7 @@ This option is treated as synonymous with &%-oi%&.
 
 .vitem &%-oMa%&&~<&'host&~address'&>
 .oindex "&%-oMa%&"
 
 .vitem &%-oMa%&&~<&'host&~address'&>
 .oindex "&%-oMa%&"

-.cindex "sender host address" "specifying for local message"
+.cindex "sender" "host address, specifying for local message"

 A number of options starting with &%-oM%& can be used to set values associated
 with remote hosts on locally-submitted messages (that is, messages not received
 over TCP/IP). These options can be used by any caller in conjunction with the
 A number of options starting with &%-oM%& can be used to set values associated
 with remote hosts on locally-submitted messages (that is, messages not received
 over TCP/IP). These options can be used by any caller in conjunction with the


@@ -3937,7 +3965,7 @@ whichever one is last.
 
 .vitem &%-oMaa%&&~<&'name'&>
 .oindex "&%-oMaa%&"
 
 .vitem &%-oMaa%&&~<&'name'&>
 .oindex "&%-oMaa%&"

-.cindex "authentication name" "specifying for local message"
+.cindex "authentication" "name, specifying for local message"

 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMaa%&
 option sets the value of &$sender_host_authenticated$& (the authenticator
 name). See chapter &<<CHAPSMTPAUTH>>& for a discussion of SMTP authentication.
 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMaa%&
 option sets the value of &$sender_host_authenticated$& (the authenticator
 name). See chapter &<<CHAPSMTPAUTH>>& for a discussion of SMTP authentication.


@@ -3946,7 +3974,7 @@ authenticated SMTP session without actually using the SMTP AUTH command.
 
 .vitem &%-oMai%&&~<&'string'&>
 .oindex "&%-oMai%&"
 
 .vitem &%-oMai%&&~<&'string'&>
 .oindex "&%-oMai%&"

-.cindex "authentication id" "specifying for local message"
+.cindex "authentication" "id, specifying for local message"

 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMai%&
 option sets the value of &$authenticated_id$& (the id that was authenticated).
 This overrides the default value (the caller's login id, except with &%-bh%&,
 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMai%&
 option sets the value of &$authenticated_id$& (the id that was authenticated).
 This overrides the default value (the caller's login id, except with &%-bh%&,


@@ -3955,7 +3983,7 @@ where there is no default) for messages from local sources. See chapter
 
 .vitem &%-oMas%&&~<&'address'&>
 .oindex "&%-oMas%&"
 
 .vitem &%-oMas%&&~<&'address'&>
 .oindex "&%-oMas%&"

-.cindex "authentication sender" "specifying for local message"
+.cindex "authentication" "sender, specifying for local message"

 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMas%&
 option sets the authenticated sender value in &$authenticated_sender$&. It
 overrides the sender address that is created from the caller's login id for
 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMas%&
 option sets the authenticated sender value in &$authenticated_sender$&. It
 overrides the sender address that is created from the caller's login id for


@@ -3966,18 +3994,16 @@ specified on a MAIL command overrides this value. See chapter
 
 .vitem &%-oMi%&&~<&'interface&~address'&>
 .oindex "&%-oMi%&"
 
 .vitem &%-oMi%&&~<&'interface&~address'&>
 .oindex "&%-oMi%&"

-.cindex "interface address" "specifying for local message"
-.new
+.cindex "interface" "address, specifying for local message"

 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMi%&
 option sets the IP interface address value. A port number may be included,
 using the same syntax as for &%-oMa%&. The interface address is placed in
 &$received_ip_address$& and the port number, if present, in &$received_port$&.
 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMi%&
 option sets the IP interface address value. A port number may be included,
 using the same syntax as for &%-oMa%&. The interface address is placed in
 &$received_ip_address$& and the port number, if present, in &$received_port$&.

-.wen

 
 .vitem &%-oMr%&&~<&'protocol&~name'&>
 .oindex "&%-oMr%&"
 
 .vitem &%-oMr%&&~<&'protocol&~name'&>
 .oindex "&%-oMr%&"

-.cindex "protocol" "incoming &-- specifying for local message"
-.cindex "&$received_protocol$&"
+.cindex "protocol, specifying for local message"
+.vindex "&$received_protocol$&"

 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMr%&
 option sets the received protocol value that is stored in
 &$received_protocol$&. However, it does not apply (and is ignored) when &%-bh%&
 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMr%&
 option sets the received protocol value that is stored in
 &$received_protocol$&. However, it does not apply (and is ignored) when &%-bh%&


@@ -3989,7 +4015,7 @@ be set by &%-oMr%&.
 
 .vitem &%-oMs%&&~<&'host&~name'&>
 .oindex "&%-oMs%&"
 
 .vitem &%-oMs%&&~<&'host&~name'&>
 .oindex "&%-oMs%&"

-.cindex "sender host name" "specifying for local message"
+.cindex "sender" "host name, specifying for local message"

 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMs%&
 option sets the sender host name in &$sender_host_name$&. When this option is
 present, Exim does not attempt to look up a host name from an IP address; it
 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMs%&
 option sets the sender host name in &$sender_host_name$&. When this option is
 present, Exim does not attempt to look up a host name from an IP address; it


@@ -3997,7 +4023,7 @@ uses the name it is given.
 
 .vitem &%-oMt%&&~<&'ident&~string'&>
 .oindex "&%-oMt%&"
 
 .vitem &%-oMt%&&~<&'ident&~string'&>
 .oindex "&%-oMt%&"

-.cindex "sender ident string" "specifying for local message"
+.cindex "sender" "ident string, specifying for local message"

 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMt%&
 option sets the sender ident value in &$sender_ident$&. The default setting for
 local callers is the login id of the calling process, except when &%-bh%& is
 See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMt%&
 option sets the sender ident value in &$sender_ident$&. The default setting for
 local callers is the login id of the calling process, except when &%-bh%& is


@@ -4037,7 +4063,7 @@ described in section &<<SECTtimeformat>>&.
 .vitem &%-os%&&~<&'time'&>
 .oindex "&%-os%&"
 .cindex "timeout" "for SMTP input"
 .vitem &%-os%&&~<&'time'&>
 .oindex "&%-os%&"
 .cindex "timeout" "for SMTP input"

-.cindex "SMTP timeout" "input"
+.cindex "SMTP" "input timeout"

 This option sets a timeout value for incoming SMTP messages. The timeout
 applies to each SMTP command and block of data. The value can also be set by
 the &%smtp_receive_timeout%& option; it defaults to 5 minutes. The format used
 This option sets a timeout value for incoming SMTP messages. The timeout
 applies to each SMTP command and block of data. The value can also be set by
 the &%smtp_receive_timeout%& option; it defaults to 5 minutes. The format used


@@ -4245,7 +4271,6 @@ address containing the given string, which is checked in a case-independent
 way. If the <&'rsflags'&> start with &'r'&, <&'string'&> is interpreted as a
 regular expression; otherwise it is a literal string.
 
 way. If the <&'rsflags'&> start with &'r'&, <&'string'&> is interpreted as a
 regular expression; otherwise it is a literal string.
 

-.new

 If you want to do periodic queue runs for messages with specific recipients,
 you can combine &%-R%& with &%-q%& and a time value. For example:
 .code
 If you want to do periodic queue runs for messages with specific recipients,
 you can combine &%-R%& with &%-q%& and a time value. For example:
 .code


@@ -4254,7 +4279,6 @@ exim -q25m -R @special.domain.example
 This example does a queue run for messages with recipients in the given domain
 every 25 minutes. Any additional flags that are specified with &%-q%& are
 applied to each queue run.
 This example does a queue run for messages with recipients in the given domain
 every 25 minutes. Any additional flags that are specified with &%-q%& are
 applied to each queue run.

-.wen

 
 Once a message is selected for delivery by this mechanism, all its addresses
 are processed. For the first selected message, Exim overrides any retry
 
 Once a message is selected for delivery by this mechanism, all its addresses
 are processed. For the first selected message, Exim overrides any retry


@@ -4456,7 +4480,7 @@ configuration.
 
 
 
 
 
 

-.section "Using a different configuration file"
+.section "Using a different configuration file" "SECID40"

 .cindex "configuration file" "alternate"
 A one-off alternate configuration can be specified by the &%-C%& command line
 option, which may specify a single file or a list of files. However, when
 .cindex "configuration file" "alternate"
 A one-off alternate configuration can be specified by the &%-C%& command line
 option, which may specify a single file or a list of files. However, when


@@ -4513,30 +4537,38 @@ is introduced by the word &"begin"& followed by the name of the part. The
 optional parts are:
 
 .ilist
 optional parts are:
 
 .ilist

-&'ACL'&: Access control lists for controlling incoming SMTP mail.
+&'ACL'&: Access control lists for controlling incoming SMTP mail (see chapter
+&<<CHAPACL>>&).

 .next
 .cindex "AUTH" "configuration"
 &'authenticators'&: Configuration settings for the authenticator drivers. These
 are concerned with the SMTP AUTH command (see chapter &<<CHAPSMTPAUTH>>&).
 .next
 &'routers'&: Configuration settings for the router drivers. Routers process
 .next
 .cindex "AUTH" "configuration"
 &'authenticators'&: Configuration settings for the authenticator drivers. These
 are concerned with the SMTP AUTH command (see chapter &<<CHAPSMTPAUTH>>&).
 .next
 &'routers'&: Configuration settings for the router drivers. Routers process

-addresses and determine how the message is to be delivered.
+addresses and determine how the message is to be delivered (see chapters
+&<<CHAProutergeneric>>&&--&<<CHAPredirect>>&).

 .next
 &'transports'&: Configuration settings for the transport drivers. Transports
 .next
 &'transports'&: Configuration settings for the transport drivers. Transports

-define mechanisms for copying messages to destinations.
+define mechanisms for copying messages to destinations (see chapters
+&<<CHAPtransportgeneric>>&&--&<<CHAPsmtptrans>>&).

 .next
 .next

-&'retry'&: Retry rules, for use when a message cannot be immediately delivered.
+&'retry'&: Retry rules, for use when a message cannot be delivered immediately.
+If there is no retry section, or if it is empty (that is, no retry rules are
+defined), Exim will not retry deliveries. In this situation, temporary errors
+are treated the same as permanent errors. Retry rules are discussed in chapter
+&<<CHAPretry>>&.

 .next
 &'rewrite'&: Global address rewriting rules, for use when a message arrives and
 .next
 &'rewrite'&: Global address rewriting rules, for use when a message arrives and

-when new addresses are generated during delivery.
+when new addresses are generated during delivery. Rewriting is discussed in
+chapter &<<CHAPrewrite>>&.

 .next
 &'local_scan'&: Private options for the &[local_scan()]& function. If you
 want to use this feature, you must set
 .code
 LOCAL_SCAN_HAS_OPTIONS=yes
 .endd
 .next
 &'local_scan'&: Private options for the &[local_scan()]& function. If you
 want to use this feature, you must set
 .code
 LOCAL_SCAN_HAS_OPTIONS=yes
 .endd

-in &_Local/Makefile_& before building Exim. Full details of the
-&[local_scan()]& facility are given in chapter &<<CHAPlocalscan>>&.
+in &_Local/Makefile_& before building Exim. Details of the &[local_scan()]&
+facility are given in chapter &<<CHAPlocalscan>>&.

 .endlist
 
 .cindex "configuration file" "leading white space in"
 .endlist
 
 .cindex "configuration file" "leading white space in"


@@ -4568,11 +4600,11 @@ described.
 
 
 
 
 
 

-.section "File inclusions in the configuration file"
+.section "File inclusions in the configuration file" "SECID41"

 .cindex "inclusions in configuration file"
 .cindex "configuration file" "including other files"
 .cindex "inclusions in configuration file"
 .cindex "configuration file" "including other files"

-.cindex ".include in configuration file"
-.cindex ".include_if_exists in configuration file"
+.cindex "&`.include`& in configuration file"
+.cindex "&`.include_if_exists`& in configuration file"

 You can include other files inside Exim's run time configuration file by
 using this syntax:
 .display
 You can include other files inside Exim's run time configuration file by
 using this syntax:
 .display


@@ -4621,7 +4653,7 @@ Macros may also be defined between router, transport, authenticator, or ACL
 definitions. They may not, however, be defined within an individual driver or
 ACL, or in the &%local_scan%&, retry, or rewrite sections of the configuration.
 
 definitions. They may not, however, be defined within an individual driver or
 ACL, or in the &%local_scan%&, retry, or rewrite sections of the configuration.
 

-.section "Macro substitution"
+.section "Macro substitution" "SECID42"

 Once a macro is defined, all subsequent lines in the file (and any included
 files) are scanned for the macro name; if there are several macros, the line is
 scanned for each in turn, in the order in which the macros are defined. The
 Once a macro is defined, all subsequent lines in the file (and any included
 files) are scanned for the macro name; if there are several macros, the line is
 scanned for each in turn, in the order in which the macros are defined. The


@@ -4641,7 +4673,7 @@ line is ignored. A macro at the start of a line may turn the line into a
 comment line or a &`.include`& line.
 
 
 comment line or a &`.include`& line.
 
 

-.section "Redefining macros"
+.section "Redefining macros" "SECID43"

 Once defined, the value of a macro can be redefined later in the configuration
 (or in an included file). Redefinition is specified by using &'=='& instead of
 &'='&. For example:
 Once defined, the value of a macro can be redefined later in the configuration
 (or in an included file). Redefinition is specified by using &'=='& instead of
 &'='&. For example:


@@ -4662,7 +4694,7 @@ MAC == MAC and something added
 This can be helpful in situations where the configuration file is built
 from a number of other files.
 
 This can be helpful in situations where the configuration file is built
 from a number of other files.
 

-.section "Overriding macro values"
+.section "Overriding macro values" "SECID44"

 The values set for macros in the configuration file can be overridden by the
 &%-D%& command line option, but Exim gives up its root privilege when &%-D%& is
 used, unless called by root or the Exim user. A definition on the command line
 The values set for macros in the configuration file can be overridden by the
 &%-D%& command line option, but Exim gives up its root privilege when &%-D%& is
 used, unless called by root or the Exim user. A definition on the command line


@@ -4671,7 +4703,7 @@ file to be ignored.
 
 
 
 
 
 

-.section "Example of macro usage"
+.section "Example of macro usage" "SECID45"

 As an example of macro usage, consider a configuration where aliases are looked
 up in a MySQL database. It helps to keep the file less cluttered if long
 strings such as SQL statements are defined separately as macros, for example:
 As an example of macro usage, consider a configuration where aliases are looked
 up in a MySQL database. It helps to keep the file less cluttered if long
 strings such as SQL statements are defined separately as macros, for example:


@@ -4688,9 +4720,9 @@ address lists. In Exim 4 these are handled better by named lists &-- see
 section &<<SECTnamedlists>>&.
 
 
 section &<<SECTnamedlists>>&.
 
 

-.section "Conditional skips in the configuration file"
+.section "Conditional skips in the configuration file" "SECID46"

 .cindex "configuration file" "conditional skips"
 .cindex "configuration file" "conditional skips"

-.cindex ".ifdef"
+.cindex "&`.ifdef`&"

 You can use the directives &`.ifdef`&, &`.ifndef`&, &`.elifdef`&,
 &`.elifndef`&, &`.else`&, and &`.endif`& to dynamically include or exclude
 portions of the configuration file. The processing happens whenever the file is
 You can use the directives &`.ifdef`&, &`.ifndef`&, &`.elifdef`&,
 &`.elifndef`&, &`.else`&, and &`.endif`& to dynamically include or exclude
 portions of the configuration file. The processing happens whenever the file is


@@ -4733,6 +4765,9 @@ space) and then the value. For example:
 .code
 qualify_domain = mydomain.example.com
 .endd
 .code
 qualify_domain = mydomain.example.com
 .endd

+.cindex "hiding configuration option values"
+.cindex "configuration options" "hiding value of"
+.cindex "options" "hiding value of"

 Some option settings may contain sensitive data, for example, passwords for
 accessing databases. To stop non-admin users from using the &%-bP%& command
 line option to read these values, you can precede the option settings with the
 Some option settings may contain sensitive data, for example, passwords for
 accessing databases. To stop non-admin users from using the &%-bP%& command
 line option to read these values, you can precede the option settings with the


@@ -4751,7 +4786,7 @@ The following sections describe the syntax used for the different data types
 that are found in option settings.
 
 
 that are found in option settings.
 
 

-.section "Boolean options"
+.section "Boolean options" "SECID47"

 .cindex "format" "boolean"
 .cindex "boolean configuration values"
 .oindex "&%no_%&&'xxx'&"
 .cindex "format" "boolean"
 .cindex "boolean configuration values"
 .oindex "&%no_%&&'xxx'&"


@@ -4777,51 +4812,51 @@ You can use whichever syntax you prefer.
 
 
 
 
 
 

-.section "Integer values"
+.section "Integer values" "SECID48"

 .cindex "integer configuration values"
 .cindex "format" "integer"
 .cindex "integer configuration values"
 .cindex "format" "integer"

-If an integer data item starts with the characters &"0x"&, the remainder of it
-is interpreted as a hexadecimal number. Otherwise, it is treated as octal if it
-starts with the digit 0, and decimal if not. If an integer value is followed by
-the letter K, it is multiplied by 1024; if it is followed by the letter M, it
-is multiplied by 1024x1024.
-
-When the values of integer option settings are output, values which are an
-exact multiple of 1024 or 1024x1024 are
-sometimes, but not always,
-printed using the letters K and M. The printing style is independent of the
-actual input format that was used.
+If an option's type is given as &"integer"&, the value can be given in decimal,
+hexadecimal, or octal. If it starts with a digit greater than zero, a decimal
+number is assumed. Otherwise, it is treated as an octal number unless it starts
+with the characters &"0x"&, in which case the remainder is interpreted as a
+hexadecimal number.
+
+If an integer value is followed by the letter K, it is multiplied by 1024; if
+it is followed by the letter M, it is multiplied by 1024x1024. When the values
+of integer option settings are output, values which are an exact multiple of
+1024 or 1024x1024 are sometimes, but not always, printed using the letters K
+and M. The printing style is independent of the actual input format that was
+used.

 
 
 
 

-.section "Octal integer values"
+.section "Octal integer values" "SECID49"

 .cindex "integer format"
 .cindex "format" "octal integer"
 .cindex "integer format"
 .cindex "format" "octal integer"

-The value of an option specified as an octal integer is always interpreted in
-octal, whether or not it starts with the digit zero. Such options are always
-output in octal.
-
+If an option's type is given as &"octal integer"&, its value is always
+interpreted as an octal number, whether or not it starts with the digit zero.
+Such options are always output in octal.

 
 
 
 

-.section "Fixed point number values"
+.section "Fixed point numbers" "SECID50"

 .cindex "fixed point configuration values"
 .cindex "format" "fixed point"
 .cindex "fixed point configuration values"
 .cindex "format" "fixed point"

-A fixed point number consists of a decimal integer, optionally followed by a
-decimal point and up to three further digits.
+If an option's type is given as &"fixed-point"&, its value must be a decimal
+integer, optionally followed by a decimal point and up to three further digits.

 
 
 
 
 
 

-.section "Time interval values" "SECTtimeformat"
+.section "Time intervals" "SECTtimeformat"

 .cindex "time interval" "specifying in configuration"
 .cindex "format" "time interval"
 A time interval is specified as a sequence of numbers, each followed by one of
 the following letters, with no intervening white space:
 
 .cindex "time interval" "specifying in configuration"
 .cindex "format" "time interval"
 A time interval is specified as a sequence of numbers, each followed by one of
 the following letters, with no intervening white space:
 

-.table2 50pt
-.row &~&%s%& seconds
-.row &~&%m%& minutes
-.row &~&%h%& hours
-.row &~&%d%& days
-.row &~&%w%& weeks
+.table2 30pt
+.irow &%s%& seconds
+.irow &%m%& minutes
+.irow &%h%& hours
+.irow &%d%& days
+.irow &%w%& weeks

 .endtable
 
 For example, &"3h50m"& specifies 3 hours and 50 minutes. The values of time
 .endtable
 
 For example, &"3h50m"& specifies 3 hours and 50 minutes. The values of time


@@ -4833,16 +4868,16 @@ is perfectly acceptable, for example, to specify &"90m"& instead of &"1h30m"&.
 .section "String values" "SECTstrings"
 .cindex "string" "format of configuration values"
 .cindex "format" "string"
 .section "String values" "SECTstrings"
 .cindex "string" "format of configuration values"
 .cindex "format" "string"

-If a string data item does not start with a double-quote character, it is taken
-as consisting of the remainder of the line plus any continuation lines,
-starting at the first character after any leading white space, with trailing
-white space removed, and with no interpretation of the characters in the
-string. Because Exim removes comment lines (those beginning with #) at an early
-stage, they can appear in the middle of a multi-line string. The following
-settings are therefore equivalent:
+If an option's type is specified as &"string"&, the value can be specified with
+or without double-quotes. If it does not start with a double-quote, the value
+consists of the remainder of the line plus any continuation lines, starting at
+the first character after any leading white space, with trailing white space
+removed, and with no interpretation of the characters in the string. Because
+Exim removes comment lines (those beginning with #) at an early stage, they can
+appear in the middle of a multi-line string. The following two settings are
+therefore equivalent:

 .code
 trusted_users = uucp:mail
 .code
 trusted_users = uucp:mail

-

 trusted_users = uucp:\
                 # This comment line is ignored
                 mail
 trusted_users = uucp:\
                 # This comment line is ignored
                 mail


@@ -4854,12 +4889,12 @@ double-quote, and any backslash characters other than those used for line
 continuation are interpreted as escape characters, as follows:
 
 .table2 100pt
 continuation are interpreted as escape characters, as follows:
 
 .table2 100pt

-.row &~&`\\`&                     "single backslash"
-.row &~&`\n`&                     "newline"
-.row &~&`\r`&                     "carriage return"
-.row &~&`\t`&                     "tab"
-.row "&~&`\`&<&'octal digits'&>"  "up to 3 octal digits specify one character"
-.row "&~&`\x`&<&'hex digits'&>"   "up to 2 hexadecimal digits specify one &&&
+.irow &`\\`&                     "single backslash"
+.irow &`\n`&                     "newline"
+.irow &`\r`&                     "carriage return"
+.irow &`\t`&                     "tab"
+.irow "&`\`&<&'octal digits'&>"  "up to 3 octal digits specify one character"
+.irow "&`\x`&<&'hex digits'&>"   "up to 2 hexadecimal digits specify one &&&

                                    character"
 .endtable
 
                                    character"
 .endtable
 


@@ -4874,8 +4909,7 @@ in order to continue lines, so you may come across older configuration files
 and examples that apparently quote unnecessarily.
 
 
 and examples that apparently quote unnecessarily.
 
 

-.section "Expanded strings"
-.cindex "string expansion" "definition of"
+.section "Expanded strings" "SECID51"

 .cindex "expansion" "definition of"
 Some strings in the configuration file are subjected to &'string expansion'&,
 by which means various parts of the string may be changed according to the
 .cindex "expansion" "definition of"
 Some strings in the configuration file are subjected to &'string expansion'&,
 by which means various parts of the string may be changed according to the


@@ -4887,10 +4921,10 @@ backslashes that are required for that reason must be doubled if they are
 within a quoted configuration string.
 
 
 within a quoted configuration string.
 
 

-.section "User and group names"
+.section "User and group names" "SECID52"

 .cindex "user name" "format of"
 .cindex "format" "user name"
 .cindex "user name" "format of"
 .cindex "format" "user name"

-.cindex "group" "name format"
+.cindex "groups" "name format"

 .cindex "format" "group name"
 User and group names are specified as strings, using the syntax described
 above, but the strings are interpreted specially. A user or group name must
 .cindex "format" "group name"
 User and group names are specified as strings, using the syntax described
 above, but the strings are interpreted specially. A user or group name must


@@ -4901,7 +4935,7 @@ either consist entirely of digits, or be a name that can be looked up using the
 .section "List construction" "SECTlistconstruct"
 .cindex "list" "syntax of in configuration"
 .cindex "format" "list item in configuration"
 .section "List construction" "SECTlistconstruct"
 .cindex "list" "syntax of in configuration"
 .cindex "format" "list item in configuration"

-.cindex "string list" "definition"
+.cindex "string" "list, definition of"

 The data for some configuration options is a list of items, with colon as the
 default separator. Many of these options are shown with type &"string list"& in
 the descriptions later in this document. Others are listed as &"domain list"&,
 The data for some configuration options is a list of items, with colon as the
 default separator. Many of these options are shown with type &"string list"& in
 the descriptions later in this document. Others are listed as &"domain list"&,


@@ -4927,6 +4961,7 @@ list items, it is not ignored when parsing the list. The space after the first
 colon in the example above is necessary. If it were not there, the list would
 be interpreted as the two items 127.0.0.1:: and 1.
 
 colon in the example above is necessary. If it were not there, the list would
 be interpreted as the two items 127.0.0.1:: and 1.
 

+.section "Changing list separators" "SECID53"

 .cindex "list separator" "changing"
 .cindex "IPv6" "addresses in lists"
 Doubling colons in IPv6 addresses is an unwelcome chore, so a mechanism was
 .cindex "list separator" "changing"
 .cindex "IPv6" "addresses in lists"
 Doubling colons in IPv6 addresses is an unwelcome chore, so a mechanism was


@@ -4941,6 +4976,30 @@ This facility applies to all lists, with the exception of the list in
 &%log_file_path%&. It is recommended that the use of non-colon separators be
 confined to circumstances where they really are needed.
 
 &%log_file_path%&. It is recommended that the use of non-colon separators be
 confined to circumstances where they really are needed.
 

+.cindex "list separator" "newline as"
+.cindex "newline" "as list separator"
+It is also possible to use newline and other control characters (those with
+code values less than 32, plus DEL) as separators in lists. Such separators
+must be provided literally at the time the list is processed. For options that
+are string-expanded, you can write the separator using a normal escape
+sequence. This will be processed by the expander before the string is
+interpreted as a list. For example, if a newline-separated list of domains is
+generated by a lookup, you can process it directly by a line such as this:
+.code
+domains = <\n ${lookup mysql{.....}}
+.endd
+This avoids having to change the list separator in such data. You are unlikely
+to want to use a control character as a separator in an option that is not
+expanded, because the value is literal text. However, it can be done by giving
+the value in quotes. For example:
+.code
+local_interfaces = "<\n 127.0.0.1 \n ::1"
+.endd
+Unlike printing character separators, which can be included in list items by
+doubling, it is not possible to include a control character as data when it is
+set as the separator. Two such characters in succession are interpreted as
+enclosing an empty list item.
+

 
 
 .section "Empty items in lists" "SECTempitelis"
 
 
 .section "Empty items in lists" "SECTempitelis"


@@ -5291,7 +5350,7 @@ bounce message ever lasts a week.
 
 
 
 
 
 

-.section "ACL configuration"
+.section "ACL configuration" "SECID54"

 .cindex "default" "ACLs"
 .cindex "&ACL;" "default configuration"
 In the default configuration, the ACL section follows the main configuration.
 .cindex "default" "ACLs"
 .cindex "&ACL;" "default configuration"
 In the default configuration, the ACL section follows the main configuration.


@@ -5497,7 +5556,7 @@ accept
 This final line in the DATA ACL accepts the message unconditionally.
 
 
 This final line in the DATA ACL accepts the message unconditionally.
 
 

-.section "Router configuration"
+.section "Router configuration" "SECID55"

 .cindex "default" "routers"
 .cindex "routers" "default"
 The router configuration comes next in the default configuration, introduced
 .cindex "default" "routers"
 .cindex "routers" "default"
 The router configuration comes next in the default configuration, introduced


@@ -5608,7 +5667,7 @@ namely:
 # local_part_suffix = +* : -*
 # local_part_suffix_optional
 .endd
 # local_part_suffix = +* : -*
 # local_part_suffix_optional
 .endd

-.cindex "&$local_part_suffix$&"
+.vindex "&$local_part_suffix$&"

 show how you can specify the recognition of local part suffixes. If the first
 is uncommented, a suffix beginning with either a plus or a minus sign, followed
 by any sequence of characters, is removed from the local part and placed in the
 show how you can specify the recognition of local part suffixes. If the first
 is uncommented, a suffix beginning with either a plus or a minus sign, followed
 by any sequence of characters, is removed from the local part and placed in the


@@ -5673,7 +5732,7 @@ routers, so the address is bounced. The commented suffix settings fulfil the
 same purpose as they do for the &(userforward)& router.
 
 
 same purpose as they do for the &(userforward)& router.
 
 

-.section "Transport configuration"
+.section "Transport configuration" "SECID56"

 .cindex "default" "transports"
 .cindex "transports" "default"
 Transports define mechanisms for actually delivering messages. They operate
 .cindex "default" "transports"
 .cindex "transports" "default"
 Transports define mechanisms for actually delivering messages. They operate


@@ -5737,7 +5796,7 @@ filter files.
 
 
 
 
 
 

-.section "Default retry rule"
+.section "Default retry rule" "SECID57"

 .cindex "retry" "default rule"
 .cindex "default" "retry rule"
 The retry section of the configuration file contains rules which affect the way
 .cindex "retry" "default rule"
 .cindex "default" "retry rule"
 The retry section of the configuration file contains rules which affect the way


@@ -5756,9 +5815,12 @@ This causes any temporarily failing address to be retried every 15 minutes for
 1.5 until 16 hours have passed, then every 6 hours up to 4 days. If an address
 is not delivered after 4 days of temporary failure, it is bounced.
 
 1.5 until 16 hours have passed, then every 6 hours up to 4 days. If an address
 is not delivered after 4 days of temporary failure, it is bounced.
 

+If the retry section is removed from the configuration, or is empty (that is,
+if no retry rules are defined), Exim will not retry deliveries. This turns
+temporary errors into permanent errors.

 
 
 
 

-.section "Rewriting configuration"
+.section "Rewriting configuration" "SECID58"

 The rewriting section of the configuration, introduced by
 .code
 begin rewrite
 The rewriting section of the configuration, introduced by
 .code
 begin rewrite


@@ -5784,19 +5846,19 @@ to support most MUA software.
 The example PLAIN authenticator looks like this:
 .code
 #PLAIN:
 The example PLAIN authenticator looks like this:
 .code
 #PLAIN:

-#  driver                     = plaintext
-#  server_set_id              = $auth2
-#  server_prompts             = :
-#  server_condition           = Authentication is not yet configured
+#  driver                  = plaintext
+#  server_set_id           = $auth2
+#  server_prompts          = :
+#  server_condition        = Authentication is not yet configured

 #  server_advertise_condition = ${if def:tls_cipher }
 .endd
 And the example LOGIN authenticator looks like this:
 .code
 #LOGIN:
 #  server_advertise_condition = ${if def:tls_cipher }
 .endd
 And the example LOGIN authenticator looks like this:
 .code
 #LOGIN:

-#  driver                     = plaintext
-#  server_set_id              = $auth1
-#  server_prompts             = <| Username: | Password:
-#  server_condition           = Authentication is not yet configured
+#  driver                  = plaintext
+#  server_set_id           = $auth1
+#  server_prompts          = <| Username: | Password:
+#  server_condition        = Authentication is not yet configured

 #  server_advertise_condition = ${if def:tls_cipher }
 .endd
 
 #  server_advertise_condition = ${if def:tls_cipher }
 .endd
 


@@ -5878,7 +5940,7 @@ $ is needed because string expansion also interprets dollar characters.
 
 
 
 
 
 

-.section "Testing regular expressions"
+.section "Testing regular expressions" "SECID59"

 .cindex "testing" "regular expressions"
 .cindex "regular expressions" "testing"
 .cindex "&'pcretest'&"
 .cindex "testing" "regular expressions"
 .cindex "regular expressions" "testing"
 .cindex "&'pcretest'&"


@@ -5924,7 +5986,7 @@ in &$1$& and the &"ac"& or &"edu"& in &$2$&.
 
 .chapter "File and database lookups" "CHAPfdlookup"
 .scindex IIDfidalo1 "file" "lookups"
 
 .chapter "File and database lookups" "CHAPfdlookup"
 .scindex IIDfidalo1 "file" "lookups"

-.scindex IIDfidalo2 "database lookups"
+.scindex IIDfidalo2 "database" "lookups"

 .cindex "lookup" "description of"
 Exim can be configured to look up data in files or databases as it processes
 messages. Two different kinds of syntax are used:
 .cindex "lookup" "description of"
 Exim can be configured to look up data in files or databases as it processes
 messages. Two different kinds of syntax are used:


@@ -5950,7 +6012,7 @@ if you have read the other two first. If you are reading this for the first
 time, be aware that some of it will make a lot more sense after you have read
 chapters &<<CHAPdomhosaddlists>>& and &<<CHAPexpand>>&.
 
 time, be aware that some of it will make a lot more sense after you have read
 chapters &<<CHAPdomhosaddlists>>& and &<<CHAPexpand>>&.
 

-.section "Examples of different lookup syntax"
+.section "Examples of different lookup syntax" "SECID60"

 It is easy to confuse the two different kinds of lookup, especially as the
 lists that may contain the second kind are always expanded before being
 processed as lists. Therefore, they may also contain lookups of the first kind.
 It is easy to confuse the two different kinds of lookup, especially as the
 lists that may contain the second kind are always expanded before being
 processed as lists. Therefore, they may also contain lookups of the first kind.


@@ -5995,7 +6057,7 @@ available. Any of them can be used in any part of the configuration where a
 lookup is permitted.
 
 
 lookup is permitted.
 
 

-.section "Lookup types"
+.section "Lookup types" "SECID61"

 .cindex "lookup" "types of"
 .cindex "single-key lookup" "definition of"
 Two different types of data lookup are implemented:
 .cindex "lookup" "types of"
 .cindex "single-key lookup" "definition of"
 Two different types of data lookup are implemented:


@@ -6037,7 +6099,7 @@ The following single-key lookup types are implemented:
 &(cdb)&: The given file is searched as a Constant DataBase file, using the key
 string without a terminating binary zero. The cdb format is designed for
 indexed files that are read frequently and never updated, except by total
 &(cdb)&: The given file is searched as a Constant DataBase file, using the key
 string without a terminating binary zero. The cdb format is designed for
 indexed files that are read frequently and never updated, except by total

-re-creation. As such, it is particulary suitable for large files containing
+re-creation. As such, it is particularly suitable for large files containing

 aliases or other indexed data referenced by an MTA. Information about cdb can
 be found in several places:
 .display
 aliases or other indexed data referenced by an MTA. Information about cdb can
 be found in several places:
 .display


@@ -6083,10 +6145,12 @@ by default, but has an option to omit them (see section &<<SECTdbmbuild>>&).
 .next
 .cindex "lookup" "dsearch"
 .cindex "dsearch lookup type"
 .next
 .cindex "lookup" "dsearch"
 .cindex "dsearch lookup type"

-&(dsearch)&: The given file must be a directory; this is searched for a file
-whose name is the key. The key may not contain any forward slash characters.
-The result of a successful lookup is the name of the file. An example of how
-this lookup can be used to support virtual domains is given in section
+&(dsearch)&: The given file must be a directory; this is searched for an entry
+whose name is the key by calling the &[lstat()]& function. The key may not
+contain any forward slash characters. If &[lstat()]& succeeds, the result of
+the lookup is the name of the entry, which may be a file, directory,
+symbolic link, or any other kind of directory entry. An example of how this
+lookup can be used to support virtual domains is given in section

 &<<SECTvirtualdomains>>&.
 .next
 .cindex "lookup" "iplsearch"
 &<<SECTvirtualdomains>>&.
 .next
 .cindex "lookup" "iplsearch"


@@ -6237,7 +6301,7 @@ lookup types support only literal keys.
 .endlist ilist
 
 
 .endlist ilist
 
 

-.section "Query-style lookup types"
+.section "Query-style lookup types" "SECID62"

 .cindex "lookup" "query-style types"
 .cindex "query-style lookup" "list of types"
 The supported query-style lookup types are listed below. Further details about
 .cindex "lookup" "query-style types"
 .cindex "query-style lookup" "list of types"
 The supported query-style lookup types are listed below. Further details about


@@ -6306,12 +6370,13 @@ not likely to be useful in normal operation.
 .next
 .cindex "whoson lookup type"
 .cindex "lookup" "whoson"
 .next
 .cindex "whoson lookup type"
 .cindex "lookup" "whoson"

-&(whoson)&: &'Whoson'& (&url(http://whoson.sourceforge.net)) is a proposed
-Internet protocol that allows Internet server programs to check whether a
-particular (dynamically allocated) IP address is currently allocated to a known
-(trusted) user and, optionally, to obtain the identity of the said user. In
-Exim, this can be used to implement &"POP before SMTP"& checking using ACL
-statements such as
+&(whoson)&: &'Whoson'& (&url(http://whoson.sourceforge.net)) is a protocol that
+allows a server to check whether a particular (dynamically allocated) IP
+address is currently allocated to a known (trusted) user and, optionally, to
+obtain the identity of the said user. For SMTP servers, &'Whoson'& was popular
+at one time for &"POP before SMTP"& authentication, but that approach has been
+superseded by SMTP authentication. In Exim, &'Whoson'& can be used to implement
+&"POP before SMTP"& checking using ACL statements such as

 .code
 require condition = \
   ${lookup whoson {$sender_host_address}{yes}{no}}
 .code
 require condition = \
   ${lookup whoson {$sender_host_address}{yes}{no}}


@@ -6324,7 +6389,7 @@ one of the fixed strings &"yes"& or &"no"&.
 
 
 
 
 
 

-.section "Temporary errors in lookups"
+.section "Temporary errors in lookups" "SECID63"

 .cindex "lookup" "temporary error in"
 Lookup functions can return temporary error codes if the lookup cannot be
 completed. For example, an SQL or LDAP database might be unavailable. For this
 .cindex "lookup" "temporary error in"
 Lookup functions can return temporary error codes if the lookup cannot be
 completed. For example, an SQL or LDAP database might be unavailable. For this


@@ -6347,11 +6412,9 @@ or may give up altogether.
 In this context, a &"default value"& is a value specified by the administrator
 that is to be used if a lookup fails.
 
 In this context, a &"default value"& is a value specified by the administrator
 that is to be used if a lookup fails.
 

-.new

 &*Note:*& This section applies only to single-key lookups. For query-style
 lookups, the facilities of the query language must be used. An attempt to
 specify a default for a query-style lookup provokes an error.
 &*Note:*& This section applies only to single-key lookups. For query-style
 lookups, the facilities of the query language must be used. An attempt to
 specify a default for a query-style lookup provokes an error.

-.wen

 
 If &"*"& is added to a single-key lookup type (for example, &%lsearch*%&)
 and the initial lookup fails, the key &"*"& is looked up in the file to
 
 If &"*"& is added to a single-key lookup type (for example, &%lsearch*%&)
 and the initial lookup fails, the key &"*"& is looked up in the file to


@@ -6493,7 +6556,7 @@ subject key is always followed by a dot.
 
 
 
 
 
 

-.section "Lookup caching"
+.section "Lookup caching" "SECID64"

 .cindex "lookup" "caching"
 .cindex "caching" "lookup data"
 Exim caches all lookup results in order to avoid needless repetition of
 .cindex "lookup" "caching"
 .cindex "caching" "lookup data"
 Exim caches all lookup results in order to avoid needless repetition of


@@ -6515,7 +6578,7 @@ complete.
 
 
 
 
 
 

-.section "Quoting lookup data"
+.section "Quoting lookup data" "SECID65"

 .cindex "lookup" "quoting"
 .cindex "quoting" "in lookups"
 When data from an incoming message is included in a query-style lookup, there
 .cindex "lookup" "quoting"
 .cindex "quoting" "in lookups"
 When data from an incoming message is included in a query-style lookup, there


@@ -6591,7 +6654,7 @@ ${lookup dnsdb{>: a=host1.example}}
 It is permitted to specify a space as the separator character. Further
 white space is ignored.
 
 It is permitted to specify a space as the separator character. Further
 white space is ignored.
 

-.section "Pseudo dnsdb record types"
+.section "Pseudo dnsdb record types" "SECID66"

 .cindex "MX record" "in &(dnsdb)& lookup"
 By default, both the preference value and the host name are returned for
 each MX record, separated by a space. If you want only host names, you can use
 .cindex "MX record" "in &(dnsdb)& lookup"
 By default, both the preference value and the host name are returned for
 each MX record, separated by a space. If you want only host names, you can use


@@ -6602,7 +6665,7 @@ ${lookup dnsdb{mxh=a.b.example}}
 In this case, the preference values are omitted, and just the host names are
 returned.
 
 In this case, the preference values are omitted, and just the host names are
 returned.
 

-.cindex "name server" "for enclosing domain"
+.cindex "name server for enclosing domain"

 Another pseudo-type is ZNS (for &"zone NS"&). It performs a lookup for NS
 records on the given domain, but if none are found, it removes the first
 component of the domain name, and tries again. This process continues until NS
 Another pseudo-type is ZNS (for &"zone NS"&). It performs a lookup for NS
 records on the given domain, but if none are found, it removes the first
 component of the domain name, and tries again. This process continues until NS


@@ -6639,7 +6702,7 @@ The authorization code can be &"Y"& for yes, &"N"& for no, &"X"& for explicit
 authorization required but absent, or &"?"& for unknown.
 
 
 authorization required but absent, or &"?"& for unknown.
 
 

-.section "Multiple dnsdb lookups"
+.section "Multiple dnsdb lookups" "SECID67"

 In the previous sections, &(dnsdb)& lookups for a single domain are described.
 However, you can specify a list of domains or IP addresses in a single
 &(dnsdb)& lookup. The list is specified in the normal Exim way, with colon as
 In the previous sections, &(dnsdb)& lookups for a single domain are described.
 However, you can specify a list of domains or IP addresses in a single
 &(dnsdb)& lookup. The list is specified in the normal Exim way, with colon as


@@ -6679,7 +6742,7 @@ yields some data, the lookup succeeds.
 
 
 .section "More about LDAP" "SECTldap"
 
 
 .section "More about LDAP" "SECTldap"

-.cindex "LDAP lookup"
+.cindex "LDAP" "lookup, more about"

 .cindex "lookup" "LDAP"
 .cindex "Solaris" "LDAP"
 The original LDAP implementation came from the University of Michigan; this has
 .cindex "lookup" "LDAP"
 .cindex "Solaris" "LDAP"
 The original LDAP implementation came from the University of Michigan; this has


@@ -6736,7 +6799,7 @@ secure (encrypted) LDAP connections. The second of these ensures that an
 encrypted TLS connection is used.
 
 
 encrypted TLS connection is used.
 
 

-.section "LDAP quoting"
+.section "LDAP quoting" "SECID68"

 .cindex "LDAP" "quoting"
 Two levels of quoting are required in LDAP queries, the first for LDAP itself
 and the second because the LDAP query is represented as a URL. Furthermore,
 .cindex "LDAP" "quoting"
 Two levels of quoting are required in LDAP queries, the first for LDAP itself
 and the second because the LDAP query is represented as a URL. Furthermore,


@@ -6793,7 +6856,7 @@ There are some further comments about quoting in the section on LDAP
 authentication below.
 
 
 authentication below.
 
 

-.section "LDAP connections"
+.section "LDAP connections" "SECID69"

 .cindex "LDAP" "connections"
 The connection to an LDAP server may either be over TCP/IP, or, when OpenLDAP
 is in use, via a Unix domain socket. The example given above does not specify
 .cindex "LDAP" "connections"
 The connection to an LDAP server may either be over TCP/IP, or, when OpenLDAP
 is in use, via a Unix domain socket. The example given above does not specify


@@ -6813,7 +6876,7 @@ Errors which cause the next server to be tried are connection failures, bind
 failures, and timeouts.
 
 For each server name in the list, a port number can be given. The standard way
 failures, and timeouts.
 
 For each server name in the list, a port number can be given. The standard way

-of specifing a host and port is to use a colon separator (RFC 1738). Because
+of specifying a host and port is to use a colon separator (RFC 1738). Because

 &%ldap_default_servers%& is a colon-separated list, such colons have to be
 doubled. For example
 .code
 &%ldap_default_servers%& is a colon-separated list, such colons have to be
 doubled. For example
 .code


@@ -6867,7 +6930,7 @@ Using &`ldapi`& with no host or path in the query, and no setting of
 
 
 
 
 
 

-.section "LDAP authentication and control information"
+.section "LDAP authentication and control information" "SECID70"

 .cindex "LDAP" "authentication"
 The LDAP URL syntax provides no way of passing authentication and other control
 information to the server. To make this possible, the URL in an LDAP query may
 .cindex "LDAP" "authentication"
 The LDAP URL syntax provides no way of passing authentication and other control
 information to the server. To make this possible, the URL in an LDAP query may


@@ -6951,7 +7014,7 @@ SMTP authentication. See the &%ldapauth%& expansion string condition in chapter
 
 
 
 
 
 

-.section "Format of data returned by LDAP"
+.section "Format of data returned by LDAP" "SECID71"

 .cindex "LDAP" "returned data formats"
 The &(ldapdn)& lookup type returns the Distinguished Name from a single entry
 as a sequence of values, for example
 .cindex "LDAP" "returned data formats"
 The &(ldapdn)& lookup type returns the Distinguished Name from a single entry
 as a sequence of values, for example


@@ -7033,6 +7096,14 @@ operator is to double any quote characters within the text.
 
 .section "SQL lookups" "SECTsql"
 .cindex "SQL lookup types"
 
 .section "SQL lookups" "SECTsql"
 .cindex "SQL lookup types"

+.cindex "MySQL" "lookup type"
+.cindex "PostgreSQL lookup type"
+.cindex "lookup" "MySQL"
+.cindex "lookup" "PostgreSQL"
+.cindex "Oracle" "lookup type"
+.cindex "lookup" "Oracle"
+.cindex "InterBase lookup type"
+.cindex "lookup" "InterBase"

 Exim can support lookups in InterBase, MySQL, Oracle, PostgreSQL, and SQLite
 databases. Queries for these databases contain SQL statements, so an example
 might be
 Exim can support lookups in InterBase, MySQL, Oracle, PostgreSQL, and SQLite
 databases. Queries for these databases contain SQL statements, so an example
 might be


@@ -7060,7 +7131,7 @@ If the result of the query yields more than one row, it is all concatenated,
 with a newline between the data for each row.
 
 
 with a newline between the data for each row.
 
 

-.section "More about MySQL, PostgreSQL, Oracle, and InterBase"
+.section "More about MySQL, PostgreSQL, Oracle, and InterBase" "SECID72"

 .cindex "MySQL" "lookup type"
 .cindex "PostgreSQL lookup type"
 .cindex "lookup" "MySQL"
 .cindex "MySQL" "lookup type"
 .cindex "PostgreSQL lookup type"
 .cindex "lookup" "MySQL"


@@ -7072,10 +7143,13 @@ with a newline between the data for each row.
 If any MySQL, PostgreSQL, Oracle, or InterBase lookups are used, the
 &%mysql_servers%&, &%pgsql_servers%&, &%oracle_servers%&, or &%ibase_servers%&
 option (as appropriate) must be set to a colon-separated list of server
 If any MySQL, PostgreSQL, Oracle, or InterBase lookups are used, the
 &%mysql_servers%&, &%pgsql_servers%&, &%oracle_servers%&, or &%ibase_servers%&
 option (as appropriate) must be set to a colon-separated list of server

-information. Each item in the list is a slash-separated list of four items:
-host name, database name, user name, and password. In the case of Oracle, the
-host name field is used for the &"service name"&, and the database name field
-is not used and should be empty. For example:
+information.
+&new("(For MySQL and PostgreSQL only, the global option need not be set if all
+queries contain their own server information &-- see section
+&<<SECTspeserque>>&.)") Each item in the list is a slash-separated list of four
+items: host name, database name, user name, and password. In the case of
+Oracle, the host name field is used for the &"service name"&, and the database
+name field is not used and should be empty. For example:

 .code
 hide oracle_servers = oracle.plc.example//userx/abcdwxyz
 .endd
 .code
 hide oracle_servers = oracle.plc.example//userx/abcdwxyz
 .endd


@@ -7088,8 +7162,10 @@ hide mysql_servers = localhost/users/root/secret:\
 .endd
 For MySQL and PostgreSQL, a host may be specified as <&'name'&>:<&'port'&> but
 because this is a colon-separated list, the colon has to be doubled. For each
 .endd
 For MySQL and PostgreSQL, a host may be specified as <&'name'&>:<&'port'&> but
 because this is a colon-separated list, the colon has to be doubled. For each

-query, these parameter groups are tried in order until a connection and a query
-succeeds.
+query, these parameter groups are tried in order until a connection is made and
+a query is successfully processed. The result of a query may be that no data is
+found, but that is still a successful query. In other words, the list of
+servers provides a backup facility, not a list of different places to look.

 
 The &%quote_mysql%&, &%quote_pgsql%&, and &%quote_oracle%& expansion operators
 convert newline, tab, carriage return, and backspace to \n, \t, \r, and \b
 
 The &%quote_mysql%&, &%quote_pgsql%&, and &%quote_oracle%& expansion operators
 convert newline, tab, carriage return, and backspace to \n, \t, \r, and \b


@@ -7099,8 +7175,48 @@ addition, escapes the percent and underscore characters. This cannot be done
 for MySQL because these escapes are not recognized in contexts where these
 characters are not special.
 
 for MySQL because these escapes are not recognized in contexts where these
 characters are not special.
 

+.section "Specifying the server in the query" "SECTspeserque"
+For MySQL and PostgreSQL lookups (but not currently for Oracle and InterBase),
+it is possible to specify a list of servers with an individual query. This is
+done by starting the query with
+.display
+&`servers=`&&'server1:server2:server3:...'&&`;`&
+.endd
+Each item in the list may take one of two forms:
+.olist
+If it contains no slashes it is assumed to be just a host name. The appropriate
+global option (&%mysql_servers%& or &%pgsql_servers%&) is searched for a host
+of the same name, and the remaining parameters (database, user, password) are
+taken from there.
+.next
+If it contains any slashes, it is taken as a complete parameter set.
+.endlist
+The list of servers is used in exactly the same way as the global list.
+Once a connection to a server has happened and a query has been
+successfully executed, processing of the lookup ceases.
+
+This feature is intended for use in master/slave situations where updates
+are occurring and you want to update the master rather than a slave. If the
+master is in the list as a backup for reading, you might have a global setting
+like this:
+.code
+mysql_servers = slave1/db/name/pw:\
+                slave2/db/name/pw:\
+                master/db/name/pw
+.endd
+In an updating lookup, you could then write:
+.code
+${lookup mysql{servers=master; UPDATE ...}
+.endd
+That query would then be sent only to the master server. If, on the other hand,
+the master is not to be used for reading, and so is not present in the global
+option, you can still update it by a query of this form:
+.code
+${lookup pgsql{servers=master/db/name/pw; UPDATE ...}
+.endd
+

 
 

-.section "Special MySQL features"
+.section "Special MySQL features" "SECID73"

 For MySQL, an empty host name or the use of &"localhost"& in &%mysql_servers%&
 causes a connection to the server on the local host by means of a Unix domain
 socket. An alternate socket can be specified in parentheses. The full syntax of
 For MySQL, an empty host name or the use of &"localhost"& in &%mysql_servers%&
 causes a connection to the server on the local host by means of a Unix domain
 socket. An alternate socket can be specified in parentheses. The full syntax of


@@ -7123,7 +7239,7 @@ anything (for example, setting a field to the value it already has), the result
 is zero because no rows are affected.
 
 
 is zero because no rows are affected.
 
 

-.section "Special PostgreSQL features"
+.section "Special PostgreSQL features" "SECID74"

 PostgreSQL lookups can also use Unix domain socket connections to the database.
 This is usually faster and costs less CPU time than a TCP/IP connection.
 However it can be used only if the mail server runs on the same machine as the
 PostgreSQL lookups can also use Unix domain socket connections to the database.
 This is usually faster and costs less CPU time than a TCP/IP connection.
 However it can be used only if the mail server runs on the same machine as the


@@ -7142,7 +7258,7 @@ affected.
 
 .section "More about SQLite" "SECTsqlite"
 .cindex "lookup" "SQLite"
 
 .section "More about SQLite" "SECTsqlite"
 .cindex "lookup" "SQLite"

-.cindex "SQLite lookup type"
+.cindex "sqlite lookup type"

 SQLite is different to the other SQL lookups because a file name is required in
 addition to the SQL query. An SQLite database is a single file, and there is no
 daemon as in the other SQL databases. The interface to Exim requires the name
 SQLite is different to the other SQL lookups because a file name is required in
 addition to the SQL query. An SQLite database is a single file, and there is no
 daemon as in the other SQL databases. The interface to Exim requires the name


@@ -7192,7 +7308,7 @@ general facilities that apply to all four kinds of list.
 
 
 
 
 
 

-.section "Expansion of lists"
+.section "Expansion of lists" "SECID75"

 .cindex "expansion" "of lists"
 Each list is expanded as a single string before it is used. The result of
 expansion must be a list, possibly containing empty items, which is split up
 .cindex "expansion" "of lists"
 Each list is expanded as a single string before it is used. The result of
 expansion must be a list, possibly containing empty items, which is split up


@@ -7222,7 +7338,7 @@ senders based on the receiving domain.
 
 
 
 
 
 

-.section "Negated items in lists"
+.section "Negated items in lists" "SECID76"

 .cindex "list" "negation"
 .cindex "negation" "in lists"
 Items in a list may be positive or negative. Negative items are indicated by a
 .cindex "list" "negation"
 .cindex "negation" "in lists"
 Items in a list may be positive or negative. Negative items are indicated by a


@@ -7297,7 +7413,7 @@ any domain matching &`*.b.c`& is not.
 
 
 
 
 
 

-.section "An lsearch file is not an out-of-line list"
+.section "An lsearch file is not an out-of-line list" "SECID77"

 As will be described in the sections that follow, lookups can be used in lists
 to provide indexed methods of checking list membership. There has been some
 confusion about the way &(lsearch)& lookups work in lists. Because
 As will be described in the sections that follow, lookups can be used in lists
 to provide indexed methods of checking list membership. There has been some
 confusion about the way &(lsearch)& lookups work in lists. Because


@@ -7392,7 +7508,7 @@ hosts. The default configuration is set up like this.
 
 
 
 
 
 

-.section "Named lists compared with macros"
+.section "Named lists compared with macros" "SECID78"

 .cindex "list" "named compared with macro"
 .cindex "macro" "compared with named list"
 At first sight, named lists might seem to be no different from macros in the
 .cindex "list" "named compared with macro"
 .cindex "macro" "compared with named list"
 At first sight, named lists might seem to be no different from macros in the


@@ -7418,7 +7534,7 @@ auth_advertise_hosts = !host1 : !host2
 .endd
 
 
 .endd
 
 

-.section "Named list caching"
+.section "Named list caching" "SECID79"

 .cindex "list" "caching of named"
 .cindex "caching" "named lists"
 While processing a message, Exim caches the result of checking a named list if
 .cindex "list" "caching of named"
 .cindex "caching" "named lists"
 While processing a message, Exim caches the result of checking a named list if


@@ -7456,7 +7572,7 @@ The following types of item may appear in domain lists:
 .ilist
 .cindex "primary host name"
 .cindex "host name" "matched in domain list"
 .ilist
 .cindex "primary host name"
 .cindex "host name" "matched in domain list"

-.cindex "&%primary_hostname%&"
+.oindex "&%primary_hostname%&"

 .cindex "domain list" "matching primary host name"
 .cindex "@ in a domain list"
 If a pattern consists of a single @ character, it matches the local host name,
 .cindex "domain list" "matching primary host name"
 .cindex "@ in a domain list"
 If a pattern consists of a single @ character, it matches the local host name,


@@ -7467,9 +7583,11 @@ differ only in their names.
 .cindex "@[] in a domain list"
 .cindex "domain list" "matching local IP interfaces"
 .cindex "domain literal"
 .cindex "@[] in a domain list"
 .cindex "domain list" "matching local IP interfaces"
 .cindex "domain literal"

-If a pattern consists of the string &`@[]`& it matches any local IP interface
-address, enclosed in square brackets, as in an email address that contains a
-domain literal.
+If a pattern consists of the string &`@[]`& it matches an IP address enclosed
+in square brackets (as in an email address that contains a domain literal), but
+only if that IP address is recognized as local for email routing purposes. The
+&%local_interfaces%& and &%extra_local_interfaces%& options can be used to
+control which of a host's several IP addresses are treated as local.

 In today's Internet, the use of domain literals is controversial.
 .next
 .cindex "@mx_any"
 In today's Internet, the use of domain literals is controversial.
 .next
 .cindex "@mx_any"


@@ -7478,7 +7596,7 @@ In today's Internet, the use of domain literals is controversial.
 .cindex "domain list" "matching MX pointers to local host"
 If a pattern consists of the string &`@mx_any`& it matches any domain that
 has an MX record pointing to the local host or to any host that is listed in
 .cindex "domain list" "matching MX pointers to local host"
 If a pattern consists of the string &`@mx_any`& it matches any domain that
 has an MX record pointing to the local host or to any host that is listed in

-.cindex "&%hosts_treat_as_local%&"
+.oindex "&%hosts_treat_as_local%&"

 &%hosts_treat_as_local%&. The items &`@mx_primary`& and &`@mx_secondary`&
 are similar, except that the first matches only when a primary MX target is the
 local host, and the second only when no primary MX target is the local host,
 &%hosts_treat_as_local%&. The items &`@mx_primary`& and &`@mx_secondary`&
 are similar, except that the first matches only when a primary MX target is the
 local host, and the second only when no primary MX target is the local host,


@@ -7537,8 +7655,10 @@ list item such as &`*key.ex`& matches &'donkey.ex'& as well as
 If a pattern starts with a circumflex character, it is treated as a regular
 expression, and matched against the domain using a regular expression matching
 function. The circumflex is treated as part of the regular expression.
 If a pattern starts with a circumflex character, it is treated as a regular
 expression, and matched against the domain using a regular expression matching
 function. The circumflex is treated as part of the regular expression.

-References to descriptions of the syntax of regular expressions are given in
-chapter &<<CHAPregexp>>&.
+Email domains are case-independent, so this regular expression match is by
+default case-independent, but you can make it case-dependent by starting it
+with &`(?-i)`&. References to descriptions of the syntax of regular expressions
+are given in chapter &<<CHAPregexp>>&.

 
 &*Warning*&: Because domain lists are expanded before being processed, you
 must escape any backslash and dollar characters in the regular expression, or
 
 &*Warning*&: Because domain lists are expanded before being processed, you
 must escape any backslash and dollar characters in the regular expression, or


@@ -7632,7 +7752,7 @@ You need to be particularly careful with this when single-key lookups are
 involved, to ensure that the right value is being used as the key.
 
 
 involved, to ensure that the right value is being used as the key.
 
 

-.section "Special host list patterns"
+.section "Special host list patterns" "SECID80"

 .cindex "empty item in hosts list"
 .cindex "host list" "empty string in"
 If a host list item is the empty string, it matches only when no remote host is
 .cindex "empty item in hosts list"
 .cindex "host list" "empty string in"
 If a host list item is the empty string, it matches only when no remote host is


@@ -7779,13 +7899,25 @@ The IP address of the subject host is masked using <&'number'&> as the mask
 length. A textual string is constructed from the masked value, followed by the
 mask, and this is used as the lookup key. For example, if the host's IP address
 is 192.168.34.6, the key that is looked up for the above example is
 length. A textual string is constructed from the masked value, followed by the
 mask, and this is used as the lookup key. For example, if the host's IP address
 is 192.168.34.6, the key that is looked up for the above example is

-&"192.168.34.0/24"&. IPv6 addresses are converted to a text value using lower
-case letters and dots as separators instead of the more usual colon, because
-colon is the key terminator in &(lsearch)& files. Full, unabbreviated IPv6
+&"192.168.34.0/24"&.
+
+When an IPv6 address is converted to a string, dots are normally used instead
+of colons, so that keys in &(lsearch)& files need not contain colons (which
+terminate &(lsearch)& keys). This was implemented some time before the ability
+to quote keys was made available in &(lsearch)& files. However, the more
+recently implemented &(iplsearch)& files do require colons in IPv6 keys
+(notated using the quoting facility) so as to distinguish them from IPv4 keys.
+For this reason, when the lookup type is &(iplsearch)&, IPv6 addresses are
+converted using colons and not dots. In all cases, full, unabbreviated IPv6

 addresses are always used.
 
 addresses are always used.
 

-&*Warning*&: Specifing &%net32-%& (for an IPv4 address) or &%net128-%& (for an
-IPv6 address) is not the same as specifing just &%net-%& without a number. In
+Ideally, it would be nice to tidy up this anomalous situation by changing to
+colons in all cases, given that quoting is now available for &(lsearch)&.
+However, this would be an incompatible change that might break some existing
+configurations.
+
+&*Warning*&: Specifying &%net32-%& (for an IPv4 address) or &%net128-%& (for an
+IPv6 address) is not the same as specifying just &%net-%& without a number. In

 the former case the key strings include the mask value, whereas in the latter
 case the IP address is used on its own.
 
 the former case the key strings include the mask value, whereas in the latter
 case the IP address is used on its own.
 


@@ -7812,7 +7944,6 @@ Consider what will happen if a name cannot be found.
 Because of the problems of determining host names from IP addresses, matching
 against host names is not as common as matching against IP addresses.
 
 Because of the problems of determining host names from IP addresses, matching
 against host names is not as common as matching against IP addresses.
 

-.new

 By default, in order to find a host name, Exim first does a reverse DNS lookup;
 if no name is found in the DNS, the system function (&[gethostbyaddr()]& or
 &[getipnodebyaddr()]& if available) is tried. The order in which these lookups
 By default, in order to find a host name, Exim first does a reverse DNS lookup;
 if no name is found in the DNS, the system function (&[gethostbyaddr()]& or
 &[getipnodebyaddr()]& if available) is tried. The order in which these lookups


@@ -7822,7 +7953,6 @@ for these names and compares them with the IP address that it started with.
 Only those names whose IP addresses match are accepted. Any other names are
 discarded. If no names are left, Exim behaves as if the host name cannot be
 found. In the most common case there is only one name and one IP address.
 Only those names whose IP addresses match are accepted. Any other names are
 discarded. If no names are left, Exim behaves as if the host name cannot be
 found. In the most common case there is only one name and one IP address.

-.wen

 
 There are some options that control what happens if a host name cannot be
 found. These are described in section &<<SECTbehipnot>>& below.
 
 There are some options that control what happens if a host name cannot be
 found. These are described in section &<<SECTbehipnot>>& below.


@@ -7843,7 +7973,11 @@ expression.
 .cindex "regular expressions" "in host list"
 .cindex "host list" "regular expression in"
 If the item starts with &"^"& it is taken to be a regular expression which is
 .cindex "regular expressions" "in host list"
 .cindex "host list" "regular expression in"
 If the item starts with &"^"& it is taken to be a regular expression which is

-matched against the host name. For example,
+matched against the host name. Host names are case-independent, so this regular
+expression match is by default case-independent, but you can make it
+case-dependent by starting it with &`(?-i)`&. References to descriptions of the
+syntax of regular expressions are given in chapter &<<CHAPregexp>>&. For
+example,

 .code
 ^(a|b)\.c\.d$
 .endd
 .code
 ^(a|b)\.c\.d$
 .endd


@@ -7865,12 +7999,15 @@ required.
 
 
 .section "Behaviour when an IP address or name cannot be found" "SECTbehipnot"
 
 
 .section "Behaviour when an IP address or name cannot be found" "SECTbehipnot"

-.cindex "host" "lookup failures"
+.cindex "host" "lookup failures, permanent"

 While processing a host list, Exim may need to look up an IP address from a
 name (see section &<<SECThoslispatip>>&), or it may need to look up a host name
 from an IP address (see section &<<SECThoslispatnam>>&). In either case, the
 behaviour when it fails to find the information it is seeking is the same.
 
 While processing a host list, Exim may need to look up an IP address from a
 name (see section &<<SECThoslispatip>>&), or it may need to look up a host name
 from an IP address (see section &<<SECThoslispatnam>>&). In either case, the
 behaviour when it fails to find the information it is seeking is the same.
 

+&*Note*&: This section applies to permanent lookup failures. It does &'not'&
+apply to temporary DNS errors, whose handling is described in the next section.
+

 .cindex "&`+include_unknown`&"
 .cindex "&`+ignore_unknown`&"
 By default, Exim behaves as if the host does not match the list. This may not
 .cindex "&`+include_unknown`&"
 .cindex "&`+ignore_unknown`&"
 By default, Exim behaves as if the host does not match the list. This may not


@@ -7904,15 +8041,23 @@ Both &`+include_unknown`& and &`+ignore_unknown`& may appear in the same
 list. The effect of each one lasts until the next, or until the end of the
 list.
 
 list. The effect of each one lasts until the next, or until the end of the
 list.
 

-&*Note*&: This section applies to permanent lookup failures. It does &'not'&
-apply to temporary DNS errors. They always cause a defer action (except when
-&%dns_again_means_nonexist%& converts them into permanent errors).
+
+.section "Temporary DNS errors when looking up host information" &&&
+         "SECTtemdnserr"
+.cindex "host" "lookup failures, temporary"
+.cindex "&`+include_defer`&"
+.cindex "&`+ignore_defer`&"
+A temporary DNS lookup failure normally causes a defer action (except when
+&%dns_again_means_nonexist%& converts it into a permanent error). However,
+host lists can include &`+ignore_defer`& and &`+include_defer`&, analagous to
+&`+ignore_unknown`& and &`+include_unknown`&, as described in the previous
+section. These options should be used with care, probably only in non-critical
+host lists such as whitelists.

 
 
 
 .section "Host list patterns for single-key lookups by host name" &&&
          "SECThoslispatnamsk"
 
 
 
 .section "Host list patterns for single-key lookups by host name" &&&
          "SECThoslispatnamsk"

-.cindex "host" "lookup failures"

 .cindex "unknown host name"
 .cindex "host list" "matching host name"
 If a pattern is of the form
 .cindex "unknown host name"
 .cindex "host list" "matching host name"
 If a pattern is of the form


@@ -7923,7 +8068,7 @@ for example
 .code
 dbm;/host/accept/list
 .endd
 .code
 dbm;/host/accept/list
 .endd

-a single-key lookup is performend, using the host name as its key. If the
+a single-key lookup is performed, using the host name as its key. If the

 lookup succeeds, the host matches the item. The actual data that is looked up
 is not used.
 
 lookup succeeds, the host matches the item. The actual data that is looked up
 is not used.
 


@@ -7936,7 +8081,7 @@ lookup, both using the same file.
 
 
 
 
 
 

-.section "Host list patterns for query-style lookups"
+.section "Host list patterns for query-style lookups" "SECID81"

 If a pattern is of the form
 .display
 <&'query-style-search-type'&>;<&'query'&>
 If a pattern is of the form
 .display
 <&'query-style-search-type'&>;<&'query'&>


@@ -8290,7 +8435,7 @@ string.
 
 
 
 
 
 

-.section "Character escape sequences in expanded strings"
+.section "Character escape sequences in expanded strings" "SECID82"

 .cindex "expansion" "escape sequences"
 A backslash followed by one of the letters &"n"&, &"r"&, or &"t"& in an
 expanded string is recognized as an escape sequence for the character newline,
 .cindex "expansion" "escape sequences"
 A backslash followed by one of the letters &"n"&, &"r"&, or &"t"& in an
 expanded string is recognized as an escape sequence for the character newline,


@@ -8304,10 +8449,10 @@ in. Their interpretation in expansions as well is useful for unquoted strings,
 and for other cases such as looked-up strings that are then expanded.
 
 
 and for other cases such as looked-up strings that are then expanded.
 
 

-.section "Testing string expansions"
+.section "Testing string expansions" "SECID83"

 .cindex "expansion" "testing"
 .cindex "testing" "string expansion"
 .cindex "expansion" "testing"
 .cindex "testing" "string expansion"

-.cindex "&%-be%& option"
+.oindex "&%-be%&"

 Many expansions can be tested by calling Exim with the &%-be%& option. This
 takes the command arguments, or lines from the standard input if there are no
 arguments, runs them through the string expansion code, and writes the results
 Many expansions can be tested by calling Exim with the &%-be%& option. This
 takes the command arguments, or lines from the standard input if there are no
 arguments, runs them through the string expansion code, and writes the results


@@ -8321,8 +8466,7 @@ Exim gives up its root privilege when it is called with the &%-be%& option, and
 instead runs under the uid and gid it was called with, to prevent users from
 using &%-be%& for reading files to which they do not have access.
 
 instead runs under the uid and gid it was called with, to prevent users from
 using &%-be%& for reading files to which they do not have access.
 

-.new
-.cindex "&%-bem%& option"
+.oindex "&%-bem%&"

 If you want to test expansions that include variables whose values are taken
 from a message, there are two other options that can be used. The &%-bem%&
 option is like &%-be%& except that it is followed by a file name. The file is
 If you want to test expansions that include variables whose values are taken
 from a message, there are two other options that can be used. The &%-bem%&
 option is like &%-be%& except that it is followed by a file name. The file is


@@ -8337,7 +8481,6 @@ exim -be -Mset 1GrA8W-0004WS-LQ '$recipients'
 .endd
 This loads the message from Exim's spool before doing the test expansions, and
 is therefore restricted to admin users.
 .endd
 This loads the message from Exim's spool before doing the test expansions, and
 is therefore restricted to admin users.

-.wen

 
 
 .section "Forced expansion failure" "SECTforexpfai"
 
 
 .section "Forced expansion failure" "SECTforexpfai"


@@ -8390,6 +8533,10 @@ below. The operator notation is used for simple expansion items that have just
 one argument, because it reduces the number of braces and therefore makes the
 string easier to understand.
 
 one argument, because it reduces the number of braces and therefore makes the
 string easier to understand.
 

+.vitem &*$bheader_*&<&'header&~name'&>&*:*&&~or&~&*$bh_*&<&'header&~name'&>&*:*&
+This item inserts &"basic"& header lines. It is described with the &%header%&
+expansion item below.
+

 .vitem "&*${dlfunc{*&<&'file'&>&*}{*&<&'function'&>&*}{*&<&'arg'&>&*}&&&
        {*&<&'arg'&>&*}...}*&"
 .cindex &%dlfunc%&
 .vitem "&*${dlfunc{*&<&'file'&>&*}{*&<&'function'&>&*}{*&<&'arg'&>&*}&&&
        {*&<&'arg'&>&*}...}*&"
 .cindex &%dlfunc%&


@@ -8439,7 +8586,7 @@ form:
 .display
 <&'key1'&> = <&'value1'&>  <&'key2'&> = <&'value2'&> ...
 .endd
 .display
 <&'key1'&> = <&'value1'&>  <&'key2'&> = <&'value2'&> ...
 .endd

-.cindex "&$value$&"
+.vindex "&$value$&"

 where the equals signs and spaces (but not both) are optional. If any of the
 values contain white space, they must be enclosed in double quotes, and any
 values that are enclosed in double quotes are subject to escape processing as
 where the equals signs and spaces (but not both) are optional. If any of the
 values contain white space, they must be enclosed in double quotes, and any
 values that are enclosed in double quotes are subject to escape processing as


@@ -8498,6 +8645,24 @@ yields &"99"&. Two successive separators mean that the field between them is
 empty (for example, the fifth field above).
 
 
 empty (for example, the fifth field above).
 
 

+.vitem &*${filter{*&<&'string'&>&*}{*&<&'condition'&>&*}}*&
+.cindex "list" "selecting by condition"
+.cindex "expansion" "selecting from list by condition"
+.vindex "&$item$&"
+After expansion, <&'string'&> is interpreted as a list, colon-separated by
+default, but the separator can be changed in the usual way. For each item
+in this list, its value is place in &$item$&, and then the condition is
+evaluated. If the condition is true, &$item$& is added to the output as an
+item in a new list; if the condition is false, the item is discarded. The
+separator used for the output list is the same as the one used for the
+input, but a separator setting is not included in the output. For example:
+.code
+${filter{a:b:c}{!eq{$item}{b}}
+.endd
+yields &`a:c`&. At the end of the expansion, the value of &$item$& is restored
+to what it was before. See also the &*map*& and &*reduce*& expansion items.
+
+

 .vitem &*${hash{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&
 .cindex "hash function" "textual"
 .cindex "expansion" "textual hash"
 .vitem &*${hash{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&
 .cindex "hash function" "textual"
 .cindex "expansion" "textual hash"


@@ -8529,19 +8694,15 @@ letters appear. For example:
 .endd
 
 .vitem "&*$header_*&<&'header&~name'&>&*:*&&~or&~&&&
 .endd
 
 .vitem "&*$header_*&<&'header&~name'&>&*:*&&~or&~&&&

-        &*$h_*&<&'header&~name'&>&*:*&"
-See &*$rheader*& below.
-
-.vitem "&*$bheader_*&<&'header&~name'&>&*:*&&~or&~&&&
-        &*$bh_*&<&'header&~name'&>&*:*&"
-See &*$rheader*& below.
-
-.vitem "&*$rheader_*&<&'header&~name'&>&*:*&&~or&~&&&
+        &*$h_*&<&'header&~name'&>&*:*&" &&&
+       "&*$bheader_*&<&'header&~name'&>&*:*&&~or&~&&&
+        &*$bh_*&<&'header&~name'&>&*:*&" &&&
+       "&*$rheader_*&<&'header&~name'&>&*:*&&~or&~&&&

         &*$rh_*&<&'header&~name'&>&*:*&"
 .cindex "expansion" "header insertion"
         &*$rh_*&<&'header&~name'&>&*:*&"
 .cindex "expansion" "header insertion"

-.cindex "&$header_$&"
-.cindex "&$bheader_$&"
-.cindex "&$rheader_$&"
+.vindex "&$header_$&"
+.vindex "&$bheader_$&"
+.vindex "&$rheader_$&"

 .cindex "header lines" "in expansion strings"
 .cindex "header lines" "character sets"
 .cindex "header lines" "decoding"
 .cindex "header lines" "in expansion strings"
 .cindex "header lines" "character sets"
 .cindex "header lines" "decoding"


@@ -8597,7 +8758,6 @@ any printing characters except space and colon. Consequently, curly brackets
 &'do not'& terminate header names, and should not be used to enclose them as
 if they were variables. Attempting to do so causes a syntax error.
 
 &'do not'& terminate header names, and should not be used to enclose them as
 if they were variables. Attempting to do so causes a syntax error.
 

-.new

 Only header lines that are common to all copies of a message are visible to
 this mechanism. These are the original header lines that are received with the
 message, and any that are added by an ACL statement or by a system
 Only header lines that are common to all copies of a message are visible to
 this mechanism. These are the original header lines that are received with the
 message, and any that are added by an ACL statement or by a system


@@ -8610,7 +8770,6 @@ message is received. Header lines that are added in a RCPT ACL (for example)
 are saved until the message's incoming header lines are available, at which
 point they are added. When a DATA ACL is running, however, header lines added
 by earlier ACLs are visible.
 are saved until the message's incoming header lines are available, at which
 point they are added. When a DATA ACL is running, however, header lines added
 by earlier ACLs are visible.

-.wen

 
 Upper case and lower case letters are synonymous in header names. If the
 following character is white space, the terminating colon may be omitted, but
 
 Upper case and lower case letters are synonymous in header names. If the
 following character is white space, the terminating colon may be omitted, but


@@ -8620,7 +8779,6 @@ If the message does not contain the given header, the expansion item is
 replaced by an empty string. (See the &%def%& condition in section
 &<<SECTexpcond>>& for a means of testing for the existence of a header.)
 
 replaced by an empty string. (See the &%def%& condition in section
 &<<SECTexpcond>>& for a means of testing for the existence of a header.)
 

-.new

 If there is more than one header with the same name, they are all concatenated
 to form the substitution string, up to a maximum length of 64K. Unless
 &%rheader%& is being used, leading and trailing white space is removed from
 If there is more than one header with the same name, they are all concatenated
 to form the substitution string, up to a maximum length of 64K. Unless
 &%rheader%& is being used, leading and trailing white space is removed from


@@ -8629,7 +8787,6 @@ newline character is then inserted between non-empty headers, but there is no
 newline at the very end. For the &%header%& and &%bheader%& expansion, for
 those headers that contain lists of addresses, a comma is also inserted at the
 junctions between headers. This does not happen for the &%rheader%& expansion.
 newline at the very end. For the &%header%& and &%bheader%& expansion, for
 those headers that contain lists of addresses, a comma is also inserted at the
 junctions between headers. This does not happen for the &%rheader%& expansion.

-.wen

 
 
 .vitem &*${hmac{*&<&'hashname'&>&*}{*&<&'secret'&>&*}{*&<&'string'&>&*}}*&
 
 
 .vitem &*${hmac{*&<&'hashname'&>&*}{*&<&'secret'&>&*}{*&<&'string'&>&*}}*&


@@ -8698,7 +8855,7 @@ condition = ${if >{$acl_m4}{3}}
 
 .vitem &*${length{*&<&'string1'&>&*}{*&<&'string2'&>&*}}*&
 .cindex "expansion" "string truncation"
 
 .vitem &*${length{*&<&'string1'&>&*}{*&<&'string2'&>&*}}*&
 .cindex "expansion" "string truncation"

-.cindex "&%length%&" "expansion item"
+.cindex "&%length%& expansion item"

 The &%length%& item is used to extract the initial portion of a string. Both
 strings are expanded, and the first one must yield a number, <&'n'&>, say. If
 you are using a fixed value for the number, that is, if <&'string1'&> does not
 The &%length%& item is used to extract the initial portion of a string. Both
 strings are expanded, and the first one must yield a number, <&'n'&>, say. If
 you are using a fixed value for the number, that is, if <&'string1'&> does not


@@ -8733,7 +8890,7 @@ other place where white space is significant, the lookup item must be enclosed
 in double quotes. The use of data lookups in users' filter files may be locked
 out by the system administrator.
 
 in double quotes. The use of data lookups in users' filter files may be locked
 out by the system administrator.
 

-.cindex "&$value$&"
+.vindex "&$value$&"

 If the lookup succeeds, <&'string1'&> is expanded and replaces the entire item.
 During its expansion, the variable &$value$& contains the data returned by the
 lookup. Afterwards it reverts to the value it had previously (at the outer
 If the lookup succeeds, <&'string1'&> is expanded and replaces the entire item.
 During its expansion, the variable &$value$& contains the data returned by the
 lookup. Afterwards it reverts to the value it had previously (at the outer


@@ -8773,6 +8930,23 @@ ${lookup nisplus {[name=$local_part],passwd.org_dir:gcos} \
   {$value}fail}
 .endd
 
   {$value}fail}
 .endd
 

+
+.vitem &*${map{*&<&'string1'&>&*}{*&<&'string2'&>&*}}*&
+.cindex "expansion" "list creation"
+.vindex "&$item$&"
+After expansion, <&'string1'&> is interpreted as a list, colon-separated by
+default, but the separator can be changed in the usual way. For each item
+in this list, its value is place in &$item$&, and then <&'string2'&> is
+expanded and added to the output as an item in a new list. The separator used
+for the output list is the same as the one used for the input, but a separator
+setting is not included in the output. For example:
+.code
+${map{a:b:c}{[$item]}} ${map{<- x-y-z}{($item)}}
+.endd
+expands to &`[a]:[b]:[c] (x)-(y)-(z)`&. At the end of the expansion, the
+value of &$item$& is restored to what it was before. See also the &*filter*&
+and &*reduce*& expansion items.
+

 .vitem &*${nhash{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&
 .cindex "expansion" "numeric hash"
 .cindex "hash function" "numeric"
 .vitem &*${nhash{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&
 .cindex "expansion" "numeric hash"
 .cindex "hash function" "numeric"


@@ -8820,7 +8994,7 @@ out the use of this expansion item in filter files.
 
 
 .vitem &*${prvs{*&<&'address'&>&*}{*&<&'secret'&>&*}{*&<&'keynumber'&>&*}}*&
 
 
 .vitem &*${prvs{*&<&'address'&>&*}{*&<&'secret'&>&*}{*&<&'keynumber'&>&*}}*&

-.cindex "prvs" "expansion item"
+.cindex "&%prvs%& expansion item"

 The first argument is a complete email address and the second is secret
 keystring. The third argument, specifying a key number, is optional. If absent,
 it defaults to 0. The result of the expansion is a prvs-signed email address,
 The first argument is a complete email address and the second is secret
 keystring. The third argument, specifying a key number, is optional. If absent,
 it defaults to 0. The result of the expansion is a prvs-signed email address,


@@ -8830,7 +9004,7 @@ and an example, see section &<<SECTverifyPRVS>>&.
 
 .vitem "&*${prvscheck{*&<&'address'&>&*}{*&<&'secret'&>&*}&&&
         {*&<&'string'&>&*}}*&"
 
 .vitem "&*${prvscheck{*&<&'address'&>&*}{*&<&'secret'&>&*}&&&
         {*&<&'string'&>&*}}*&"

-.cindex "prvscheck" "expansion item"
+.cindex "&%prvscheck%& expansion item"

 This expansion item is the complement of the &%prvs%& item. It is used for
 checking prvs-signed addresses. If the expansion of the first argument does not
 yield a syntactically valid prvs-signed address, the whole item expands to the
 This expansion item is the complement of the &%prvs%& item. It is used for
 checking prvs-signed addresses. If the expansion of the first argument does not
 yield a syntactically valid prvs-signed address, the whole item expands to the


@@ -8874,7 +9048,7 @@ locks out the use of this expansion item in filter files.
 .vitem "&*${readsocket{*&<&'name'&>&*}{*&<&'request'&>&*}&&&
         {*&<&'timeout'&>&*}{*&<&'eol&~string'&>&*}{*&<&'fail&~string'&>&*}}*&"
 .cindex "expansion" "inserting from a socket"
 .vitem "&*${readsocket{*&<&'name'&>&*}{*&<&'request'&>&*}&&&
         {*&<&'timeout'&>&*}{*&<&'eol&~string'&>&*}{*&<&'fail&~string'&>&*}}*&"
 .cindex "expansion" "inserting from a socket"

-.cindex "socket" "use of in expansion"
+.cindex "socket, use of in expansion"

 .cindex "&%readsocket%& expansion item"
 This item inserts data from a Unix domain or Internet socket into the expanded
 string. The minimal way of using it uses just two arguments, as in these
 .cindex "&%readsocket%& expansion item"
 This item inserts data from a Unix domain or Internet socket into the expanded
 string. The minimal way of using it uses just two arguments, as in these


@@ -8937,7 +9111,34 @@ non-existent Unix domain socket, or a failure to connect to an Internet socket.
 The &(redirect)& router has an option called &%forbid_filter_readsocket%& which
 locks out the use of this expansion item in filter files.
 
 The &(redirect)& router has an option called &%forbid_filter_readsocket%& which
 locks out the use of this expansion item in filter files.
 

-.vitem &*$rheader_*&<&'header&~name'&>&*:&~or&~$rh_*&<&'header&~name'&>&*:*&
+
+.vitem &*${reduce{*&<&'string1'&>}{<&'string2'&>&*}{*&<&'string3'&>&*}}*&
+.cindex "expansion" "reducing a list to a scalar"
+.cindex "list" "reducing to a scalar"
+.vindex "&$value$&"
+.vindex "&$item$&"
+This operation reduces a list to a single, scalar string. After expansion,
+<&'string1'&> is interpreted as a list, colon-separated by default, but the
+separator can be changed in the usual way. Then <&'string2'&> is expanded and
+assigned to the &$value$& variable. After this, each item in the <&'string1'&>
+list is assigned to &$item$& in turn, and <&'string3'&> is expanded for each of
+them. The result of that expansion is assigned to &$value$& before the next
+iteration. When the end of the list is reached, the final value of &$value$& is
+added to the expansion output. The &*reduce*& expansion item can be used in a
+number of ways. For example, to add up a list of numbers:
+.code
+${reduce {<, 1,2,3}{0}{${eval:$value+$item}}}
+.endd
+The result of that expansion would be &`6`&. The maximum of a list of numbers
+can be found:
+.code
+${reduce {3:0:9:4:6}{0}{${if >{$item}{$value}{$item}{$value}}}}
+.endd
+At the end of a &*reduce*& expansion, the values of &$item$& and &$value$& are
+restored to what they were before. See also the &*filter*& and &*map*&
+expansion items.
+
+.vitem &*$rheader_*&<&'header&~name'&>&*:*&&~or&~&*$rh_*&<&'header&~name'&>&*:*&

 This item inserts &"raw"& header lines. It is described with the &%header%&
 expansion item above.
 
 This item inserts &"raw"& header lines. It is described with the &%header%&
 expansion item above.
 


@@ -8950,11 +9151,10 @@ command is run in a separate process, but under the same uid and gid. As in
 other command executions from Exim, a shell is not used by default. If you want
 a shell, you must explicitly code it.
 
 other command executions from Exim, a shell is not used by default. If you want
 a shell, you must explicitly code it.
 

-.new

 The standard input for the command exists, but is empty. The standard output
 and standard error are set to the same file descriptor.
 .cindex "return code" "from &%run%& expansion"
 The standard input for the command exists, but is empty. The standard output
 and standard error are set to the same file descriptor.
 .cindex "return code" "from &%run%& expansion"

-.cindex "&$value$&"
+.vindex "&$value$&"

 If the command succeeds (gives a zero return code) <&'string1'&> is expanded
 and replaces the entire item; during this expansion, the standard output/error
 from the command is in the variable &$value$&. If the command fails,
 If the command succeeds (gives a zero return code) <&'string1'&> is expanded
 and replaces the entire item; during this expansion, the standard output/error
 from the command is in the variable &$value$&. If the command fails,


@@ -8966,9 +9166,8 @@ If <&'string2'&> is absent, the result is empty. Alternatively, <&'string2'&>
 can be the word &"fail"& (not in braces) to force expansion failure if the
 command does not succeed. If both strings are omitted, the result is contents
 of the standard output/error on success, and nothing on failure.
 can be the word &"fail"& (not in braces) to force expansion failure if the
 command does not succeed. If both strings are omitted, the result is contents
 of the standard output/error on success, and nothing on failure.

-.wen

 
 

-.cindex "&$runrc$&"
+.vindex "&$runrc$&"

 The return code from the command is put in the variable &$runrc$&, and this
 remains set afterwards, so in a filter file you can do things like this:
 .code
 The return code from the command is put in the variable &$runrc$&, and this
 remains set afterwards, so in a filter file you can do things like this:
 .code


@@ -9017,7 +9216,7 @@ the regular expression from string expansion.
 
 
 .vitem &*${substr{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&
 
 
 .vitem &*${substr{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&

-.cindex "&%substr%&"
+.cindex "&%substr%& expansion item"

 .cindex "substring extraction"
 .cindex "expansion" "substring extraction"
 The three strings are expanded; the first two must yield numbers. Call them
 .cindex "substring extraction"
 .cindex "expansion" "substring extraction"
 The three strings are expanded; the first two must yield numbers. Call them


@@ -9101,14 +9300,36 @@ following operations can be performed:
 .vlist
 .vitem &*${address:*&<&'string'&>&*}*&
 .cindex "expansion" "RFC 2822 address handling"
 .vlist
 .vitem &*${address:*&<&'string'&>&*}*&
 .cindex "expansion" "RFC 2822 address handling"

-.cindex "&%address%&" "expansion item"
+.cindex "&%address%& expansion item"

 The string is interpreted as an RFC 2822 address, as it might appear in a
 header line, and the effective address is extracted from it. If the string does
 not parse successfully, the result is empty.
 
 
 The string is interpreted as an RFC 2822 address, as it might appear in a
 header line, and the effective address is extracted from it. If the string does
 not parse successfully, the result is empty.
 
 

+.vitem &*${addresses:*&<&'string'&>&*}*&
+.cindex "expansion" "RFC 2822 address handling"
+.cindex "&%addresses%& expansion item"
+The string (after expansion) is interpreted as a list of addresses in RFC
+2822 format, such as can be found in a &'To:'& or &'Cc:'& header line. The
+operative address (&'local-part@domain'&) is extracted from each item, and the
+result of the expansion is a colon-separated list, with appropriate
+doubling of colons should any happen to be present in the email addresses.
+Syntactically invalid RFC2822 address items are omitted from the output.
+
+It is possible to specify a character other than colon for the output
+separator by starting the string with > followed by the new separator
+character. For example:
+.code
+${addresses:>& Chief <ceo@up.stairs>, sec@base.ment (dogsbody)}
+.endd
+expands to &`ceo@up.stairs&&sec@base.ment`&. Compare the &*address*& (singular)
+expansion item, which extracts the working address from a single RFC2822
+address. See the &*filter*&, &*map*&, and &*reduce*& items for ways of
+processing lists.
+
+

 .vitem &*${base62:*&<&'digits'&>&*}*&
 .vitem &*${base62:*&<&'digits'&>&*}*&

-.cindex "&%base62%&"
+.cindex "&%base62%& expansion item"

 .cindex "expansion" "conversion to base 62"
 The string must consist entirely of decimal digits. The number is converted to
 base 62 and output as a string of six characters, including leading zeros. In
 .cindex "expansion" "conversion to base 62"
 The string must consist entirely of decimal digits. The number is converted to
 base 62 and output as a string of six characters, including leading zeros. In


@@ -9118,7 +9339,7 @@ names), base 36 is used by this operator, despite its name. &*Note*&: Just to
 be absolutely clear: this is &'not'& base64 encoding.
 
 .vitem &*${base62d:*&<&'base-62&~digits'&>&*}*&
 be absolutely clear: this is &'not'& base64 encoding.
 
 .vitem &*${base62d:*&<&'base-62&~digits'&>&*}*&

-.cindex "&%base62d%&"
+.cindex "&%base62d%& expansion item"

 .cindex "expansion" "conversion to base 62"
 The string must consist entirely of base-62 digits, or, in operating
 environments where Exim uses base 36 instead of base 62 for its message
 .cindex "expansion" "conversion to base 62"
 The string must consist entirely of base-62 digits, or, in operating
 environments where Exim uses base 36 instead of base 62 for its message


@@ -9134,7 +9355,7 @@ from it. If the string does not parse successfully, the result is empty.
 
 .vitem &*${escape:*&<&'string'&>&*}*&
 .cindex "expansion" "escaping non-printing characters"
 
 .vitem &*${escape:*&<&'string'&>&*}*&
 .cindex "expansion" "escaping non-printing characters"

-.cindex "&%escape%&, expansion item"
+.cindex "&%escape%& expansion item"

 If the string contains any non-printing characters, they are converted to
 escape sequences starting with a backslash. Whether characters with the most
 significant bit set (so-called &"8-bit characters"&) count as printing or not
 If the string contains any non-printing characters, they are converted to
 escape sequences starting with a backslash. Whether characters with the most
 significant bit set (so-called &"8-bit characters"&) count as printing or not


@@ -9145,21 +9366,20 @@ is controlled by the &%print_topbitchars%& option.
 .cindex "expansion" "expression evaluation"
 .cindex "expansion" "arithmetic expression"
 .cindex "&%eval%& expansion item"
 .cindex "expansion" "expression evaluation"
 .cindex "expansion" "arithmetic expression"
 .cindex "&%eval%& expansion item"

-.new

 These items supports simple arithmetic and bitwise logical operations in
 expansion strings. The string (after expansion) must be a conventional
 arithmetic expression, but it is limited to basic arithmetic operators, bitwise
 logical operators, and parentheses. All operations are carried out using
 integer arithmetic. The operator priorities are as follows (the same as in the
 C programming language):
 These items supports simple arithmetic and bitwise logical operations in
 expansion strings. The string (after expansion) must be a conventional
 arithmetic expression, but it is limited to basic arithmetic operators, bitwise
 logical operators, and parentheses. All operations are carried out using
 integer arithmetic. The operator priorities are as follows (the same as in the
 C programming language):

-.table2 90pt 300pt
-.row &~&~&~&~&~&~&~&~&'highest:'& "not (~), negate (-)"
-.row ""   "multiply (*), divide (/), remainder (%)"
-.row ""   "plus (+), minus (-)"
-.row ""   "shift-left (<<), shift-right (>>)"
-.row ""   "and (&&)"
-.row ""   "xor (^)"
-.row &~&~&~&~&~&~&~&~&'lowest:'&  "or (|)"
+.table2 70pt 300pt
+.irow &'highest:'& "not (~), negate (-)"
+.irow ""   "multiply (*), divide (/), remainder (%)"
+.irow ""   "plus (+), minus (-)"
+.irow ""   "shift-left (<<), shift-right (>>)"
+.irow ""   "and (&&)"
+.irow ""   "xor (^)"
+.irow &'lowest:'&  "or (|)"

 .endtable
 Binary operators with the same priority are evaluated from left to right. White
 space is permitted before or after operators.
 .endtable
 Binary operators with the same priority are evaluated from left to right. White
 space is permitted before or after operators.


@@ -9187,7 +9407,6 @@ a decimal representation of the answer (without &"K"& or &"M"&). For example:
 &`${eval:~255&amp;0x1234}    `&  yields 4608
 &`${eval:-(~255&amp;0x1234)} `&  yields -4608
 .endd
 &`${eval:~255&amp;0x1234}    `&  yields 4608
 &`${eval:-(~255&amp;0x1234)} `&  yields -4608
 .endd

-.wen

 
 As a more realistic example, in an ACL you might have
 .code
 
 As a more realistic example, in an ACL you might have
 .code


@@ -9221,7 +9440,7 @@ and then re-expands what it has found.
 .cindex "Unicode"
 .cindex "UTF-8" "conversion from"
 .cindex "expansion" "UTF-8 conversion"
 .cindex "Unicode"
 .cindex "UTF-8" "conversion from"
 .cindex "expansion" "UTF-8 conversion"

-.cindex "&%from_utf8%&"
+.cindex "&%from_utf8%& expansion item"

 The world is slowly moving towards Unicode, although there are no standards for
 email yet. However, other applications (including some databases) are starting
 to store data in Unicode, using UTF-8 encoding. This operator converts from a
 The world is slowly moving towards Unicode, although there are no standards for
 email yet. However, other applications (including some databases) are starting
 to store data in Unicode, using UTF-8 encoding. This operator converts from a


@@ -9255,7 +9474,7 @@ abbreviation &%h%& can be used when &%hash%& is used as an operator.
 .vitem &*${hex2b64:*&<&'hexstring'&>&*}*&
 .cindex "base64 encoding" "conversion from hex"
 .cindex "expansion" "hex to base64"
 .vitem &*${hex2b64:*&<&'hexstring'&>&*}*&
 .cindex "base64 encoding" "conversion from hex"
 .cindex "expansion" "hex to base64"

-.cindex "&%hex2b64%&"
+.cindex "&%hex2b64%& expansion item"

 This operator converts a hex string into one that is base64 encoded. This can
 be useful for processing the output of the MD5 and SHA-1 hashing functions.
 
 This operator converts a hex string into one that is base64 encoded. This can
 be useful for processing the output of the MD5 and SHA-1 hashing functions.
 


@@ -9273,7 +9492,7 @@ ${lc:$local_part}
 
 .vitem &*${length_*&<&'number'&>&*:*&<&'string'&>&*}*&
 .cindex "expansion" "string truncation"
 
 .vitem &*${length_*&<&'number'&>&*:*&<&'string'&>&*}*&
 .cindex "expansion" "string truncation"

-.cindex "&%length%&" "expansion item"
+.cindex "&%length%& expansion item"

 The &%length%& operator is a simpler interface to the &%length%& function that
 can be used when the parameter is a fixed number (as opposed to a string that
 changes when expanded). The effect is the same as
 The &%length%& operator is a simpler interface to the &%length%& function that
 can be used when the parameter is a fixed number (as opposed to a string that
 changes when expanded). The effect is the same as


@@ -9298,7 +9517,7 @@ empty.
 .cindex "IP address" "masking"
 .cindex "CIDR notation"
 .cindex "expansion" "IP address masking"
 .cindex "IP address" "masking"
 .cindex "CIDR notation"
 .cindex "expansion" "IP address masking"

-.cindex "&%mask%&, expansion item"
+.cindex "&%mask%& expansion item"

 If the form of the string to be operated on is not an IP address followed by a
 slash and an integer (that is, a network address in CIDR notation), the
 expansion fails. Otherwise, this operator converts the IP address to binary,
 If the form of the string to be operated on is not an IP address followed by a
 slash and an integer (that is, a network address in CIDR notation), the
 expansion fails. Otherwise, this operator converts the IP address to binary,


@@ -9344,7 +9563,7 @@ See the description of the general &%nhash%& item above for details.
 .vitem &*${quote:*&<&'string'&>&*}*&
 .cindex "quoting" "in string expansions"
 .cindex "expansion" "quoting"
 .vitem &*${quote:*&<&'string'&>&*}*&
 .cindex "quoting" "in string expansions"
 .cindex "expansion" "quoting"

-.cindex "&%quote%&, expansion item"
+.cindex "&%quote%& expansion item"

 The &%quote%& operator puts its argument into double quotes if it
 is an empty string or
 contains anything other than letters, digits, underscores, dots, and hyphens.
 The &%quote%& operator puts its argument into double quotes if it
 is an empty string or
 contains anything other than letters, digits, underscores, dots, and hyphens.


@@ -9404,6 +9623,20 @@ string, using as many &"encoded words"& as necessary to encode all the
 characters.
 
 
 characters.
 
 

+.vitem &*${rfc2047d:*&<&'string'&>&*}*&
+.cindex "expansion" "RFC 2047"
+.cindex "RFC 2047" "decoding"
+.cindex "&%rfc2047d%& expansion item"
+This operator decodes strings that are encoded as per RFC 2047. Binary zero
+bytes are replaced by question marks. Characters are converted into the
+character set defined by &%headers_charset%&. Overlong RFC 2047 &"words"& are
+not recognized unless &%check_rfc2047_length%& is set false.
+
+&*Note*&: If you use &%$header%&_&'xxx'&&*:*& (or &%$h%&_&'xxx'&&*:*&) to
+access a header line, RFC 2047 decoding is done automatically. You do not need
+to use this operator as well.
+
+

 
 .vitem &*${rxquote:*&<&'string'&>&*}*&
 .cindex "quoting" "in regular expressions"
 
 .vitem &*${rxquote:*&<&'string'&>&*}*&
 .cindex "quoting" "in regular expressions"


@@ -9530,12 +9763,12 @@ Note that the general negation operator provides for inequality testing. The
 two strings must take the form of optionally signed decimal integers,
 optionally followed by one of the letters &"K"& or &"M"& (in either upper or
 lower case), signifying multiplication by 1024 or 1024*1024, respectively.
 two strings must take the form of optionally signed decimal integers,
 optionally followed by one of the letters &"K"& or &"M"& (in either upper or
 lower case), signifying multiplication by 1024 or 1024*1024, respectively.

-&new("As a special case, the numerical value of an empty string is taken as
-zero.")
+As a special case, the numerical value of an empty string is taken as
+zero.

 
 .vitem &*crypteq&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "expansion" "encrypted comparison"
 
 .vitem &*crypteq&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "expansion" "encrypted comparison"

-.cindex "encrypted strings" "comparing"
+.cindex "encrypted strings, comparing"

 .cindex "&%crypteq%& expansion condition"
 This condition is included in the Exim binary if it is built to support any
 authentication mechanisms (see chapter &<<CHAPSMTPAUTH>>&). Otherwise, it is
 .cindex "&%crypteq%& expansion condition"
 This condition is included in the Exim binary if it is built to support any
 authentication mechanisms (see chapter &<<CHAPSMTPAUTH>>&). Otherwise, it is


@@ -9587,9 +9820,8 @@ systems this is no longer true, and in many cases the entire password is used,
 whatever its length.
 
 .next
 whatever its length.
 
 .next

-.new

 .cindex "&[crypt16()]&"
 .cindex "&[crypt16()]&"

-&%{crypt16}%& calls the &[crypt16()]& function, which was orginally created to
+&%{crypt16}%& calls the &[crypt16()]& function, which was originally created to

 use up to 16 characters of the password in some operating systems. Again, in
 modern operating systems, more characters may be used.
 .endlist
 use up to 16 characters of the password in some operating systems. Again, in
 modern operating systems, more characters may be used.
 .endlist


@@ -9615,7 +9847,6 @@ comparison, the default is usually either &`{crypt}`& or &`{crypt16}`&, as
 determined by the setting of DEFAULT_CRYPT in &_Local/Makefile_&. The default
 default is &`{crypt}`&. Whatever the default, you can always use either
 function by specifying it explicitly in curly brackets.
 determined by the setting of DEFAULT_CRYPT in &_Local/Makefile_&. The default
 default is &`{crypt}`&. Whatever the default, you can always use either
 function by specifying it explicitly in curly brackets.

-.wen

 
 .vitem &*def:*&<&'variable&~name'&>
 .cindex "expansion" "checking for empty variable"
 
 .vitem &*def:*&<&'variable&~name'&>
 .cindex "expansion" "checking for empty variable"


@@ -9640,19 +9871,15 @@ ${if def:header_reply-to:{$h_reply-to:}{$h_from:}}
 &*Note*&: No &%$%& appears before &%header_%& or &%h_%& in the condition, and
 the header name must be terminated by a colon if white space does not follow.
 
 &*Note*&: No &%$%& appears before &%header_%& or &%h_%& in the condition, and
 the header name must be terminated by a colon if white space does not follow.
 

-.vitem &*eq&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
+.vitem &*eq&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
+       &*eqi&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&

 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"
 .cindex "&%eq%& expansion condition"
 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"
 .cindex "&%eq%& expansion condition"

-The two substrings are first expanded. The condition is true if the two
-resulting strings are identical, including the case of letters.
-
-.vitem &*eqi&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
-.cindex "string" "comparison"
-.cindex "expansion" "string comparison"

 .cindex "&%eqi%& expansion condition"
 The two substrings are first expanded. The condition is true if the two
 .cindex "&%eqi%& expansion condition"
 The two substrings are first expanded. The condition is true if the two

-resulting strings are identical when compared in a case-independent way.
+resulting strings are identical. For &%eq%& the comparison includes the case of
+letters, whereas for &%eqi%& the comparison is case-independent.

 
 .vitem &*exists&~{*&<&'file&~name'&>&*}*&
 .cindex "expansion" "file existence test"
 
 .vitem &*exists&~{*&<&'file&~name'&>&*}*&
 .cindex "expansion" "file existence test"


@@ -9671,53 +9898,86 @@ users' filter files may be locked out by the system administrator.
 This condition, which has no data, is true during a message's first delivery
 attempt. It is false during any subsequent delivery attempts.
 
 This condition, which has no data, is true during a message's first delivery
 attempt. It is false during any subsequent delivery attempts.
 

-.vitem &*ge&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
-.cindex "&%ge%& expansion condition"
-See &*gei*&.

 
 

-.vitem &*gei&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
+.vitem "&*forall{*&<&'a list'&>&*}{*&<&'a condition'&>&*}*&" &&&
+       "&*forany{*&<&'a list'&>&*}{*&<&'a condition'&>&*}*&"
+.cindex "list" "iterative conditions"
+.cindex "expansion" "&*forall*& condition"
+.cindex "expansion" "&*forany*& condition"
+.vindex "&$item$&"
+These conditions iterate over a list. The first argument is expanded to form
+the list. By default, the list separator is a colon, but it can be changed by
+the normal method. The second argument is interpreted as a condition that is to
+be applied to each item in the list in turn. During the interpretation of the
+condition, the current list item is placed in a variable called &$item$&.
+.ilist
+For &*forany*&, interpretation stops if the condition is true for any item, and
+the result of the whole condition is true. If the condition is false for all
+items in the list, the overall condition is false.
+.next
+For &*forall*&, interpretation stops if the condition is false for any item,
+and the result of the whole condition is false. If the condition is true for
+all items in the list, the overall condition is true.
+.endlist
+Note that negation of &*forany*& means that the condition must be false for all
+items for the overall condition to succeed, and negation of &*forall*& means
+that the condition must be false for at least one item. In this example, the
+list separator is changed to a comma:
+.code
+${if forany{<, $recipients}{match{$item}{^user3@}}{yes}{no}}
+.endd
+The value of &$item$& is saved and restored while &*forany*& or &*forall*& is
+being processed, to enable these expansion items to be nested.
+
+
+.vitem &*ge&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
+       &*gei&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&

 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"
 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"

+.cindex "&%ge%& expansion condition"

 .cindex "&%gei%& expansion condition"
 The two substrings are first expanded. The condition is true if the first
 .cindex "&%gei%& expansion condition"
 The two substrings are first expanded. The condition is true if the first

-string is lexically greater than or equal to the second string: for &%ge%& the
+string is lexically greater than or equal to the second string. For &%ge%& the

 comparison includes the case of letters, whereas for &%gei%& the comparison is
 case-independent.
 
 comparison includes the case of letters, whereas for &%gei%& the comparison is
 case-independent.
 

-.vitem &*gt&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
-.cindex "&%gt%& expansion condition"
-See &*gti*&.
-
-.vitem &*gti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
+.vitem &*gt&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
+       &*gti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&

 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"
 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"

+.cindex "&%gt%& expansion condition"

 .cindex "&%gti%& expansion condition"
 The two substrings are first expanded. The condition is true if the first
 .cindex "&%gti%& expansion condition"
 The two substrings are first expanded. The condition is true if the first

-string is lexically greater than the second string: for &%gt%& the comparison
+string is lexically greater than the second string. For &%gt%& the comparison

 includes the case of letters, whereas for &%gti%& the comparison is
 case-independent.
 
 includes the case of letters, whereas for &%gti%& the comparison is
 case-independent.
 

-.vitem &*isip&~{*&<&'string'&>&*}*&
-.cindex "&%isip%& expansion condition"
-See &*isip6*&.
-
-.vitem &*isip4&~{*&<&'string'&>&*}*&
-.cindex "&%isip4%& expansion condition"
-See &*isip6*&.
-
-.vitem &*isip6&~{*&<&'string'&>&*}*&
+.vitem &*isip&~{*&<&'string'&>&*}*&  &&&
+       &*isip4&~{*&<&'string'&>&*}*& &&&
+       &*isip6&~{*&<&'string'&>&*}*&

 .cindex "IP address" "testing string format"
 .cindex "string" "testing for IP address"
 .cindex "IP address" "testing string format"
 .cindex "string" "testing for IP address"

+.cindex "&%isip%& expansion condition"
+.cindex "&%isip4%& expansion condition"

 .cindex "&%isip6%& expansion condition"
 The substring is first expanded, and then tested to see if it has the form of
 an IP address. Both IPv4 and IPv6 addresses are valid for &%isip%&, whereas
 .cindex "&%isip6%& expansion condition"
 The substring is first expanded, and then tested to see if it has the form of
 an IP address. Both IPv4 and IPv6 addresses are valid for &%isip%&, whereas

-&%isip4%& and &%isip6%& test just for IPv4 or IPv6 addresses, respectively. For
-example, you could use
+&%isip4%& and &%isip6%& test specifically for IPv4 or IPv6 addresses.
+
+For an IPv4 address, the test is for four dot-separated components, each of
+which consists of from one to three digits. For an IPv6 address, up to eight
+colon-separated components are permitted, each containing from one to four
+hexadecimal digits. There may be fewer than eight components if an empty
+component (adjacent colons) is present. Only one empty component is permitted.
+
+&*Note*&: The checks are just on the form of the address; actual numerical
+values are not considered. Thus, for example, 999.999.999.999 passes the IPv4
+check. The main use of these tests is to distinguish between IP addresses and
+host names, or between IPv4 and IPv6 addresses. For example, you could use

 .code
 ${if isip4{$sender_host_address}...
 .endd
 .code
 ${if isip4{$sender_host_address}...
 .endd

-to test which version of IP an incoming SMTP connection is using.
-
+to test which IP version an incoming SMTP connection is using.

 
 .vitem &*ldapauth&~{*&<&'ldap&~query'&>&*}*&
 .cindex "LDAP" "use for authentication"
 
 .vitem &*ldapauth&~{*&<&'ldap&~query'&>&*}*&
 .cindex "LDAP" "use for authentication"


@@ -9735,29 +9995,25 @@ of SMTP authentication, and chapter &<<CHAPplaintext>>& for an example of how
 this can be used.
 
 
 this can be used.
 
 

-.vitem &*le&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
-.cindex "&%le%& expansion condition"
-See &*lei*&.
-
-.vitem &*lei&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
+.vitem &*le&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
+       &*lei&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&

 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"
 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"

+.cindex "&%le%& expansion condition"

 .cindex "&%lei%& expansion condition"
 The two substrings are first expanded. The condition is true if the first
 .cindex "&%lei%& expansion condition"
 The two substrings are first expanded. The condition is true if the first

-string is lexically less than or equal to the second string: for &%le%& the
+string is lexically less than or equal to the second string. For &%le%& the

 comparison includes the case of letters, whereas for &%lei%& the comparison is
 case-independent.
 
 comparison includes the case of letters, whereas for &%lei%& the comparison is
 case-independent.
 

-.vitem &*lt&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
-.cindex "&%lt%& expansion condition"
-See &*lti*&.
-
-.vitem &*lti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
+.vitem &*lt&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
+       &*lti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&

 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"
 .cindex "string" "comparison"
 .cindex "expansion" "string comparison"

+.cindex "&%lt%& expansion condition"

 .cindex "&%lti%& expansion condition"
 The two substrings are first expanded. The condition is true if the first
 .cindex "&%lti%& expansion condition"
 The two substrings are first expanded. The condition is true if the first

-string is lexically less than the second string: for &%lt%& the comparison
+string is lexically less than the second string. For &%lt%& the comparison

 includes the case of letters, whereas for &%lti%& the comparison is
 case-independent.
 
 includes the case of letters, whereas for &%lti%& the comparison is
 case-independent.
 


@@ -9765,7 +10021,7 @@ case-independent.
 .vitem &*match&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "expansion" "regular expression comparison"
 .cindex "regular expressions" "match in expanded string"
 .vitem &*match&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "expansion" "regular expression comparison"
 .cindex "regular expressions" "match in expanded string"

-.cindex "&%match%&, expansion condition"
+.cindex "&%match%& expansion condition"

 The two substrings are first expanded. The second is then treated as a regular
 expression and applied to the first. Because of the pre-expansion, if the
 regular expression contains dollar, or backslash characters, they must be
 The two substrings are first expanded. The second is then treated as a regular
 expression and applied to the first. Because of the pre-expansion, if the
 regular expression contains dollar, or backslash characters, they must be


@@ -9824,7 +10080,9 @@ An empty item, which matches only if the IP address is empty. This could be
 useful for testing for a locally submitted message or one from specific hosts
 in a single test such as
 . ==== As this is a nested list, any displays it contains must be indented
 useful for testing for a locally submitted message or one from specific hosts
 in a single test such as
 . ==== As this is a nested list, any displays it contains must be indented

-. ==== as otherwise they are too far to the left.
+. ==== as otherwise they are too far to the left. This comment applies to
+. ==== the use of xmlto plus fop. There's no problem when formatting with
+. ==== sdop, with or without the extra indent.

 .code
   ${if match_ip{$sender_host_address}{:4.3.2.1:...}{...}{...}}
 .endd
 .code
   ${if match_ip{$sender_host_address}{:4.3.2.1:...}{...}{...}}
 .endd


@@ -9832,18 +10090,24 @@ where the first item in the list is the empty string.
 .next
 The item @[] matches any of the local host's interface addresses.
 .next
 .next
 The item @[] matches any of the local host's interface addresses.
 .next

-Lookups are assumed to be &"net-"& style lookups, even if &`net-`& is not
-specified. Thus, the following are equivalent:
+Single-key lookups are assumed to be like &"net-"& style lookups in host lists,
+even if &`net-`& is not specified. There is never any attempt to turn the IP
+address into a host name. The most common type of linear search for
+&*match_ip*& is likely to be &*iplsearch*&, in which the file can contain CIDR
+masks. For example:

 .code
 .code

-  ${if match_ip{$sender_host_address}{lsearch;/some/file}...
-  ${if match_ip{$sender_host_address}{net-lsearch;/some/file}...
+  ${if match_ip{$sender_host_address}{iplsearch;/some/file}...

 .endd
 .endd

-You do need to specify the &`net-`& prefix if you want to specify a
-specific address mask, for example, by using &`net24-`&. However, unless you
-are combining a &%match_ip%& condition with others, it is usually neater to use
-an expansion lookup such as:
+It is of course possible to use other kinds of lookup, and in such a case, you
+do need to specify the &`net-`& prefix if you want to specify a specific
+address mask, for example:

 .code
 .code

-  ${lookup{${mask:$sender_host_address/24}}lsearch{/some/file}...
+  ${if match_ip{$sender_host_address}{net24-dbm;/some/file}...
+.endd
+However, unless you are combining a &%match_ip%& condition with others, it is
+just as easy to use the fact that a lookup is itself a condition, and write:
+.code
+  ${lookup{${mask:$sender_host_address/24}}dbm{/a/file}...

 .endd
 .endlist ilist
 
 .endd
 .endlist ilist
 


@@ -9852,7 +10116,7 @@ Consult section &<<SECThoslispatip>>& for further details of these patterns.
 .vitem &*match_local_part&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "domain list" "in expansion condition"
 .cindex "address list" "in expansion condition"
 .vitem &*match_local_part&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "domain list" "in expansion condition"
 .cindex "address list" "in expansion condition"

-.cindex "local part list" "in expansion condition"
+.cindex "local part" "list, in expansion condition"

 .cindex "&%match_local_part%& expansion condition"
 This condition, together with &%match_address%& and &%match_domain%&, make it
 possible to test domain, address, and local part lists within expansions. Each
 .cindex "&%match_local_part%& expansion condition"
 This condition, together with &%match_address%& and &%match_domain%&, make it
 possible to test domain, address, and local part lists within expansions. Each


@@ -9956,7 +10220,7 @@ server_condition = ${if pwcheck{$auth1:$auth2}}
 .vitem &*queue_running*&
 .cindex "queue runner" "detecting when delivering from"
 .cindex "expansion" "queue runner test"
 .vitem &*queue_running*&
 .cindex "queue runner" "detecting when delivering from"
 .cindex "expansion" "queue runner test"

-.cindex "&%queue_runnint%& expansion condition"
+.cindex "&%queue_running%& expansion condition"

 This condition, which has no data, is true during delivery attempts that are
 initiated by queue runner processes, and false otherwise.
 
 This condition, which has no data, is true during delivery attempts that are
 initiated by queue runner processes, and false otherwise.
 


@@ -10026,7 +10290,7 @@ realm, and how to run the daemon, consult the Cyrus documentation.
 
 
 
 
 
 

-.section "Combining expansion conditions"
+.section "Combining expansion conditions" "SECID84"

 .cindex "expansion" "combining conditions"
 Several conditions can be tested at once by combining them using the &%and%&
 and &%or%& combination conditions. Note that &%and%& and &%or%& are complete
 .cindex "expansion" "combining conditions"
 Several conditions can be tested at once by combining them using the &%and%&
 and &%or%& combination conditions. Note that &%and%& and &%or%& are complete


@@ -10064,7 +10328,7 @@ parsed but not evaluated.
 
 
 .section "Expansion variables" "SECTexpvar"
 
 
 .section "Expansion variables" "SECTexpvar"

-.cindex "expansion variables" "list of"
+.cindex "expansion" "variables, list of"

 This section contains an alphabetical list of all the expansion variables. Some
 of them are available only when Exim is compiled with specific options such as
 support for TLS or the content scanning extension.
 This section contains an alphabetical list of all the expansion variables. Some
 of them are available only when Exim is compiled with specific options such as
 support for TLS or the content scanning extension.


@@ -10074,30 +10338,37 @@ support for TLS or the content scanning extension.
 .cindex "numerical variables (&$1$& &$2$& etc)"
 When a &%match%& expansion condition succeeds, these variables contain the
 captured substrings identified by the regular expression during subsequent
 .cindex "numerical variables (&$1$& &$2$& etc)"
 When a &%match%& expansion condition succeeds, these variables contain the
 captured substrings identified by the regular expression during subsequent

-processing of the success string of the containing &%if%& expansion item. They
-may also be set externally by some other matching process which precedes the
-expansion of the string. For example, the commands available in Exim filter
-files include an &%if%& command with its own regular expression matching
-condition.
-
-.vitem "&$acl_c0$& &-- &$acl_c19$&"
-Values can be placed in these variables by the &%set%& modifier in an ACL. The
-values persist throughout the lifetime of an SMTP connection. They can be used
-to pass information between ACLs and between different invocations of the same
-ACL. When a message is received, the values of these variables are saved with
-the message, and can be accessed by filters, routers, and transports during
-subsequent delivery.
-
-.vitem "&$acl_m0$& &-- &$acl_m19$&"
+processing of the success string of the containing &%if%& expansion item.
+However, they do not retain their values afterwards; in fact, their previous
+values are restored at the end of processing an &%if%& item. The numerical
+variables may also be set externally by some other matching process which
+precedes the expansion of the string. For example, the commands available in
+Exim filter files include an &%if%& command with its own regular expression
+matching condition.
+
+.vitem "&$acl_c...$&"

 Values can be placed in these variables by the &%set%& modifier in an ACL. They
 Values can be placed in these variables by the &%set%& modifier in an ACL. They

-retain their values while a message is being received, but are reset
-afterwards. They are also reset by MAIL, RSET, EHLO, HELO, and after starting a
-TLS session. When a message is received, the values of these variables are
-saved with the message, and can be accessed by filters, routers, and transports
+can be given any name that starts with &$acl_c$& and is at least six characters
+long, but the sixth character must be either a digit or an underscore. For
+example: &$acl_c5$&, &$acl_c_mycount$&. The values of the &$acl_c...$&
+variables persist throughout the lifetime of an SMTP connection. They can be
+used to pass information between ACLs and between different invocations of the
+same ACL. When a message is received, the values of these variables are saved
+with the message, and can be accessed by filters, routers, and transports

 during subsequent delivery.
 
 during subsequent delivery.
 

+.vitem "&$acl_m...$&"
+These variables are like the &$acl_c...$& variables, except that their values
+are reset after a message has been received. Thus, if several messages are
+received in one SMTP connection, &$acl_m...$& values are not passed on from one
+message to the next, as &$acl_c...$& values are. The &$acl_m...$& variables are
+also reset by MAIL, RSET, EHLO, HELO, and after starting a TLS session. When a
+message is received, the values of these variables are saved with the message,
+and can be accessed by filters, routers, and transports during subsequent
+delivery.
+

 .vitem &$acl_verify_message$&
 .vitem &$acl_verify_message$&

-.cindex "&$acl_verify_message$&"
+.vindex "&$acl_verify_message$&"

 After an address verification has failed, this variable contains the failure
 message. It retains its value for use in subsequent modifiers. The message can
 be preserved by coding like this:
 After an address verification has failed, this variable contains the failure
 message. It retains its value for use in subsequent modifiers. The message can
 be preserved by coding like this:


@@ -10110,7 +10381,7 @@ You can use &$acl_verify_message$& during the expansion of the &%message%& or
 failure.
 
 .vitem &$address_data$&
 failure.
 
 .vitem &$address_data$&

-.cindex "&$address_data$&"
+.vindex "&$address_data$&"

 This variable is set by means of the &%address_data%& option in routers. The
 value then remains with the address while it is processed by subsequent routers
 and eventually a transport. If the transport is handling multiple addresses,
 This variable is set by means of the &%address_data%& option in routers. The
 value then remains with the address while it is processed by subsequent routers
 and eventually a transport. If the transport is handling multiple addresses,


@@ -10135,7 +10406,7 @@ after the end of the current ACL statement. If you want to preserve
 these values for longer, you can save them in ACL variables.
 
 .vitem &$address_file$&
 these values for longer, you can save them in ACL variables.
 
 .vitem &$address_file$&

-.cindex "&$address_file$&"
+.vindex "&$address_file$&"

 When, as a result of aliasing, forwarding, or filtering, a message is directed
 to a specific file, this variable holds the name of the file when the transport
 is running. At other times, the variable is empty. For example, using the
 When, as a result of aliasing, forwarding, or filtering, a message is directed
 to a specific file, this variable holds the name of the file when the transport
 is running. At other times, the variable is empty. For example, using the


@@ -10144,26 +10415,25 @@ default configuration, if user &%r2d2%& has a &_.forward_& file containing
 /home/r2d2/savemail
 .endd
 then when the &(address_file)& transport is running, &$address_file$&
 /home/r2d2/savemail
 .endd
 then when the &(address_file)& transport is running, &$address_file$&

-contains &"/home/r2d2/savemail"&.
-
+contains the text string &`/home/r2d2/savemail`&.

 .cindex "Sieve filter" "value of &$address_file$&"
 For Sieve filters, the value may be &"inbox"& or a relative folder name. It is
 then up to the transport configuration to generate an appropriate absolute path
 to the relevant file.
 
 .vitem &$address_pipe$&
 .cindex "Sieve filter" "value of &$address_file$&"
 For Sieve filters, the value may be &"inbox"& or a relative folder name. It is
 then up to the transport configuration to generate an appropriate absolute path
 to the relevant file.
 
 .vitem &$address_pipe$&

-.cindex "&$address_pipe$&"
+.vindex "&$address_pipe$&"

 When, as a result of aliasing or forwarding, a message is directed to a pipe,
 this variable holds the pipe command when the transport is running.
 
 .vitem "&$auth1$& &-- &$auth3$&"
 When, as a result of aliasing or forwarding, a message is directed to a pipe,
 this variable holds the pipe command when the transport is running.
 
 .vitem "&$auth1$& &-- &$auth3$&"

-.cindex "&$auth1$&, &$auth2$&, etc"
+.vindex "&$auth1$&, &$auth2$&, etc"

 These variables are used in SMTP authenticators (see chapters
 &<<CHAPplaintext>>&&--&<<CHAPspa>>&). Elsewhere, they are empty.
 
 .vitem &$authenticated_id$&
 .cindex "authentication" "id"
 These variables are used in SMTP authenticators (see chapters
 &<<CHAPplaintext>>&&--&<<CHAPspa>>&). Elsewhere, they are empty.
 
 .vitem &$authenticated_id$&
 .cindex "authentication" "id"

-.cindex "&$authenticated_id$&"
+.vindex "&$authenticated_id$&"

 When a server successfully authenticates a client it may be configured to
 preserve some of the authentication information in the variable
 &$authenticated_id$& (see chapter &<<CHAPSMTPAUTH>>&). For example, a
 When a server successfully authenticates a client it may be configured to
 preserve some of the authentication information in the variable
 &$authenticated_id$& (see chapter &<<CHAPSMTPAUTH>>&). For example, a


@@ -10182,7 +10452,7 @@ command line option.
 .cindex "sender" "authenticated"
 .cindex "authentication" "sender"
 .cindex "AUTH" "on MAIL command"
 .cindex "sender" "authenticated"
 .cindex "authentication" "sender"
 .cindex "AUTH" "on MAIL command"

-.cindex "&$authenticated_sender$&"
+.vindex "&$authenticated_sender$&"

 When acting as a server, Exim takes note of the AUTH= parameter on an incoming
 SMTP MAIL command if it believes the sender is sufficiently trusted, as
 described in section &<<SECTauthparamail>>&. Unless the data is the string
 When acting as a server, Exim takes note of the AUTH= parameter on an incoming
 SMTP MAIL command if it believes the sender is sufficiently trusted, as
 described in section &<<SECTauthparamail>>&. Unless the data is the string


@@ -10190,7 +10460,7 @@ described in section &<<SECTauthparamail>>&. Unless the data is the string
 available during delivery in the &$authenticated_sender$& variable. If the
 sender is not trusted, Exim accepts the syntax of AUTH=, but ignores the data.
 
 available during delivery in the &$authenticated_sender$& variable. If the
 sender is not trusted, Exim accepts the syntax of AUTH=, but ignores the data.
 

-.cindex "&$qualify_domain$&"
+.vindex "&$qualify_domain$&"

 When a message is submitted locally (that is, not over a TCP connection), the
 value of &$authenticated_sender$& is an address constructed from the login
 name of the calling process and &$qualify_domain$&, except that a trusted user
 When a message is submitted locally (that is, not over a TCP connection), the
 value of &$authenticated_sender$& is an address constructed from the login
 name of the calling process and &$qualify_domain$&, except that a trusted user


@@ -10199,7 +10469,7 @@ can override this by means of the &%-oMas%& command line option.
 
 .vitem &$authentication_failed$&
 .cindex "authentication" "failure"
 
 .vitem &$authentication_failed$&
 .cindex "authentication" "failure"

-.cindex "&$authentication_failed$&"
+.vindex "&$authentication_failed$&"

 This variable is set to &"1"& in an Exim server if a client issues an AUTH
 command that does not succeed. Otherwise it is set to &"0"&. This makes it
 possible to distinguish between &"did not try to authenticate"&
 This variable is set to &"1"& in an Exim server if a client issues an AUTH
 command that does not succeed. Otherwise it is set to &"0"&. This makes it
 possible to distinguish between &"did not try to authenticate"&


@@ -10212,7 +10482,7 @@ an undefined mechanism.
 .vitem &$body_linecount$&
 .cindex "message body" "line count"
 .cindex "body of message" "line count"
 .vitem &$body_linecount$&
 .cindex "message body" "line count"
 .cindex "body of message" "line count"

-.cindex "&$body_linecount$&"
+.vindex "&$body_linecount$&"

 When a message is being received or delivered, this variable contains the
 number of lines in the message's body. See also &$message_linecount$&.
 
 When a message is being received or delivered, this variable contains the
 number of lines in the message's body. See also &$message_linecount$&.
 


@@ -10220,25 +10490,25 @@ number of lines in the message's body. See also &$message_linecount$&.
 .cindex "message body" "binary zero count"
 .cindex "body of message" "binary zero count"
 .cindex "binary zero" "in message body"
 .cindex "message body" "binary zero count"
 .cindex "body of message" "binary zero count"
 .cindex "binary zero" "in message body"

-.cindex "&$body_zerocount$&"
+.vindex "&$body_zerocount$&"

 When a message is being received or delivered, this variable contains the
 number of binary zero bytes in the message's body.
 
 .vitem &$bounce_recipient$&
 When a message is being received or delivered, this variable contains the
 number of binary zero bytes in the message's body.
 
 .vitem &$bounce_recipient$&

-.cindex "&$bounce_recipient$&"
+.vindex "&$bounce_recipient$&"

 This is set to the recipient address of a bounce message while Exim is creating
 it. It is useful if a customized bounce message text file is in use (see
 chapter &<<CHAPemsgcust>>&).
 
 .vitem &$bounce_return_size_limit$&
 This is set to the recipient address of a bounce message while Exim is creating
 it. It is useful if a customized bounce message text file is in use (see
 chapter &<<CHAPemsgcust>>&).
 
 .vitem &$bounce_return_size_limit$&

-.cindex "&$bounce_return_size_limit$&"
+.vindex "&$bounce_return_size_limit$&"

 This contains the value set in the &%bounce_return_size_limit%& option, rounded
 up to a multiple of 1000. It is useful when a customized error message text
 file is in use (see chapter &<<CHAPemsgcust>>&).
 
 .vitem &$caller_gid$&
 .cindex "gid (group id)" "caller"
 This contains the value set in the &%bounce_return_size_limit%& option, rounded
 up to a multiple of 1000. It is useful when a customized error message text
 file is in use (see chapter &<<CHAPemsgcust>>&).
 
 .vitem &$caller_gid$&
 .cindex "gid (group id)" "caller"

-.cindex "&$caller_gid$&"
+.vindex "&$caller_gid$&"

 The real group id under which the process that called Exim was running. This is
 not the same as the group id of the originator of a message (see
 &$originator_gid$&). If Exim re-execs itself, this variable in the new
 The real group id under which the process that called Exim was running. This is
 not the same as the group id of the originator of a message (see
 &$originator_gid$&). If Exim re-execs itself, this variable in the new


@@ -10246,61 +10516,53 @@ incarnation normally contains the Exim gid.
 
 .vitem &$caller_uid$&
 .cindex "uid (user id)" "caller"
 
 .vitem &$caller_uid$&
 .cindex "uid (user id)" "caller"

-.cindex "&$caller_uid$&"
+.vindex "&$caller_uid$&"

 The real user id under which the process that called Exim was running. This is
 not the same as the user id of the originator of a message (see
 &$originator_uid$&). If Exim re-execs itself, this variable in the new
 incarnation normally contains the Exim uid.
 
 .vitem &$compile_date$&
 The real user id under which the process that called Exim was running. This is
 not the same as the user id of the originator of a message (see
 &$originator_uid$&). If Exim re-execs itself, this variable in the new
 incarnation normally contains the Exim uid.
 
 .vitem &$compile_date$&

-.cindex "&$compile_date$&"
+.vindex "&$compile_date$&"

 The date on which the Exim binary was compiled.
 
 .vitem &$compile_number$&
 The date on which the Exim binary was compiled.
 
 .vitem &$compile_number$&

-.cindex "&$compile_number$&"
+.vindex "&$compile_number$&"

 The building process for Exim keeps a count of the number
 of times it has been compiled. This serves to distinguish different
 compilations of the same version of the program.
 
 .vitem &$demime_errorlevel$&
 The building process for Exim keeps a count of the number
 of times it has been compiled. This serves to distinguish different
 compilations of the same version of the program.
 
 .vitem &$demime_errorlevel$&

-.cindex "&$demime_errorlevel$&"
+.vindex "&$demime_errorlevel$&"

 This variable is available when Exim is compiled with
 the content-scanning extension and the obsolete &%demime%& condition. For
 details, see section &<<SECTdemimecond>>&.
 
 .vitem &$demime_reason$&
 This variable is available when Exim is compiled with
 the content-scanning extension and the obsolete &%demime%& condition. For
 details, see section &<<SECTdemimecond>>&.
 
 .vitem &$demime_reason$&

-.cindex "&$demime_reason$&"
+.vindex "&$demime_reason$&"

 This variable is available when Exim is compiled with the
 content-scanning extension and the obsolete &%demime%& condition. For details,
 see section &<<SECTdemimecond>>&.
 
 This variable is available when Exim is compiled with the
 content-scanning extension and the obsolete &%demime%& condition. For details,
 see section &<<SECTdemimecond>>&.
 

-
-.vitem &$dnslist_domain$&
+.vitem &$dnslist_domain$& &&&
+       &$dnslist_matched$& &&&
+       &$dnslist_text$& &&&
+       &$dnslist_value$&
+.vindex "&$dnslist_domain$&"
+.vindex "&$dnslist_matched$&"
+.vindex "&$dnslist_text$&"
+.vindex "&$dnslist_value$&"

 .cindex "black list (DNS)"
 .cindex "black list (DNS)"

-.cindex "&$dnslist_domain$&"
-When a client host is found to be on a DNS (black) list,
-the list's domain name is put into this variable so that it can be included in
-the rejection message.
-
-.vitem &$dnslist_text$&
-.cindex "&$dnslist_text$&"
-When a client host is found to be on a DNS (black) list, the
-contents of any associated TXT record are placed in this variable.
-
-.vitem &$dnslist_value$&
-.cindex "&$dnslist_value$&"
-When a client host is found to be on a DNS (black) list,
-the IP address from the resource record is placed in this variable.
-If there are multiple records, all the addresses are included, comma-space
-separated.
+When a DNS (black) list lookup succeeds, these variables are set to contain
+the following data from the lookup: the list's domain name, the key that was
+looked up, the contents of any associated TXT record, and the value from the
+main A record. See section &<<SECID204>>& for more details.

 
 .vitem &$domain$&
 
 .vitem &$domain$&

-.new
-.cindex "&$domain$&"
+.vindex "&$domain$&"

 When an address is being routed, or delivered on its own, this variable
 contains the domain. Uppercase letters in the domain are converted into lower
 case for &$domain$&.
 When an address is being routed, or delivered on its own, this variable
 contains the domain. Uppercase letters in the domain are converted into lower
 case for &$domain$&.

-.wen

 
 Global address rewriting happens when a message is received, so the value of
 &$domain$& during routing and delivery is the value after rewriting. &$domain$&
 
 Global address rewriting happens when a message is received, so the value of
 &$domain$& during routing and delivery is the value after rewriting. &$domain$&


@@ -10314,7 +10576,7 @@ at a time if the value of &$domain$& is required at transport time &-- this is
 the default for local transports. For further details of the environment in
 which local transports are run, see chapter &<<CHAPenvironment>>&.
 
 the default for local transports. For further details of the environment in
 which local transports are run, see chapter &<<CHAPenvironment>>&.
 

-.cindex "&%delay_warning_condition%&"
+.oindex "&%delay_warning_condition%&"

 At the end of a delivery, if all deferred addresses have the same domain, it is
 set in &$domain$& during the expansion of &%delay_warning_condition%&.
 
 At the end of a delivery, if all deferred addresses have the same domain, it is
 set in &$domain$& during the expansion of &%delay_warning_condition%&.
 


@@ -10345,14 +10607,14 @@ recipient domain (which is what is in &$domain$& at this time).
 
 .next
 .cindex "ETRN" "value of &$domain$&"
 
 .next
 .cindex "ETRN" "value of &$domain$&"

-.cindex "&%smtp_etrn_command%&"
+.oindex "&%smtp_etrn_command%&"

 When the &%smtp_etrn_command%& option is being expanded, &$domain$& contains
 the complete argument of the ETRN command (see section &<<SECTETRN>>&).
 .endlist
 
 
 .vitem &$domain_data$&
 When the &%smtp_etrn_command%& option is being expanded, &$domain$& contains
 the complete argument of the ETRN command (see section &<<SECTETRN>>&).
 .endlist
 
 
 .vitem &$domain_data$&

-.cindex "&$domain_data$&"
+.vindex "&$domain_data$&"

 When the &%domains%& option on a router matches a domain by
 means of a lookup, the data read by the lookup is available during the running
 of the router as &$domain_data$&. In addition, if the driver routes the
 When the &%domains%& option on a router matches a domain by
 means of a lookup, the data read by the lookup is available during the running
 of the router as &$domain_data$&. In addition, if the driver routes the


@@ -10366,19 +10628,19 @@ the rest of the ACL statement. In all other situations, this variable expands
 to nothing.
 
 .vitem &$exim_gid$&
 to nothing.
 
 .vitem &$exim_gid$&

-.cindex "&$exim_gid$&"
+.vindex "&$exim_gid$&"

 This variable contains the numerical value of the Exim group id.
 
 .vitem &$exim_path$&
 This variable contains the numerical value of the Exim group id.
 
 .vitem &$exim_path$&

-.cindex "&$exim_path$&"
+.vindex "&$exim_path$&"

 This variable contains the path to the Exim binary.
 
 .vitem &$exim_uid$&
 This variable contains the path to the Exim binary.
 
 .vitem &$exim_uid$&

-.cindex "&$exim_uid$&"
+.vindex "&$exim_uid$&"

 This variable contains the numerical value of the Exim user id.
 
 .vitem &$found_extension$&
 This variable contains the numerical value of the Exim user id.
 
 .vitem &$found_extension$&

-.cindex "&$found_extension$&"
+.vindex "&$found_extension$&"

 This variable is available when Exim is compiled with the
 content-scanning extension and the obsolete &%demime%& condition. For details,
 see section &<<SECTdemimecond>>&.
 This variable is available when Exim is compiled with the
 content-scanning extension and the obsolete &%demime%& condition. For details,
 see section &<<SECTdemimecond>>&.


@@ -10390,7 +10652,7 @@ be terminated by colon or white space, because it may contain a wide variety of
 characters. Note also that braces must &'not'& be used.
 
 .vitem &$home$&
 characters. Note also that braces must &'not'& be used.
 
 .vitem &$home$&

-.cindex "&$home$&"
+.vindex "&$home$&"

 When the &%check_local_user%& option is set for a router, the user's home
 directory is placed in &$home$& when the check succeeds. In particular, this
 means it is set during the running of users' filter files. A router may also
 When the &%check_local_user%& option is set for a router, the user's home
 directory is placed in &$home$& when the check succeeds. In particular, this
 means it is set during the running of users' filter files. A router may also


@@ -10401,7 +10663,7 @@ When running a filter test via the &%-bf%& option, &$home$& is set to the value
 of the environment variable HOME.
 
 .vitem &$host$&
 of the environment variable HOME.
 
 .vitem &$host$&

-.cindex "&$host$&"
+.vindex "&$host$&"

 If a router assigns an address to a transport (any transport), and passes a
 list of hosts with the address, the value of &$host$& when the transport starts
 to run is the name of the first host on the list. Note that this applies both
 If a router assigns an address to a transport (any transport), and passes a
 list of hosts with the address, the value of &$host$& when the transport starts
 to run is the name of the first host on the list. Note that this applies both


@@ -10422,13 +10684,13 @@ client is connected.
 
 
 .vitem &$host_address$&
 
 
 .vitem &$host_address$&

-.cindex "&$host_address$&"
+.vindex "&$host_address$&"

 This variable is set to the remote host's IP address whenever &$host$& is set
 for a remote connection. It is also set to the IP address that is being checked
 when the &%ignore_target_hosts%& option is being processed.
 
 .vitem &$host_data$&
 This variable is set to the remote host's IP address whenever &$host$& is set
 for a remote connection. It is also set to the IP address that is being checked
 when the &%ignore_target_hosts%& option is being processed.
 
 .vitem &$host_data$&

-.cindex "&$host_data$&"
+.vindex "&$host_data$&"

 If a &%hosts%& condition in an ACL is satisfied by means of a lookup, the
 result of the lookup is made available in the &$host_data$& variable. This
 allows you, for example, to do things like this:
 If a &%hosts%& condition in an ACL is satisfied by means of a lookup, the
 result of the lookup is made available in the &$host_data$& variable. This
 allows you, for example, to do things like this:


@@ -10437,8 +10699,8 @@ deny  hosts = net-lsearch;/some/file
 message = $host_data
 .endd
 .vitem &$host_lookup_deferred$&
 message = $host_data
 .endd
 .vitem &$host_lookup_deferred$&

-.cindex "host name lookup" "failure of"
-.cindex "&$host_lookup_deferred$&"
+.cindex "host name" "lookup, failure of"
+.vindex "&$host_lookup_deferred$&"

 This variable normally contains &"0"&, as does &$host_lookup_failed$&. When a
 message comes from a remote host and there is an attempt to look up the host's
 name from its IP address, and the attempt is not successful, one of these
 This variable normally contains &"0"&, as does &$host_lookup_failed$&. When a
 message comes from a remote host and there is an attempt to look up the host's
 name from its IP address, and the attempt is not successful, one of these


@@ -10466,41 +10728,46 @@ the result, the name is not accepted, and &$host_lookup_deferred$& is set to
 &"1"&. See also &$sender_host_name$&.
 
 .vitem &$host_lookup_failed$&
 &"1"&. See also &$sender_host_name$&.
 
 .vitem &$host_lookup_failed$&

-.cindex "&$host_lookup_failed$&"
+.vindex "&$host_lookup_failed$&"

 See &$host_lookup_deferred$&.
 
 
 .vitem &$inode$&
 See &$host_lookup_deferred$&.
 
 
 .vitem &$inode$&

-.cindex "&$inode$&"
+.vindex "&$inode$&"

 The only time this variable is set is while expanding the &%directory_file%&
 option in the &(appendfile)& transport. The variable contains the inode number
 of the temporary file which is about to be renamed. It can be used to construct
 a unique name for the file.
 
 The only time this variable is set is while expanding the &%directory_file%&
 option in the &(appendfile)& transport. The variable contains the inode number
 of the temporary file which is about to be renamed. It can be used to construct
 a unique name for the file.
 

-.new

 .vitem &$interface_address$&
 .vitem &$interface_address$&

-.cindex "&$interface_address$&"
+.vindex "&$interface_address$&"

 This is an obsolete name for &$received_ip_address$&.
 
 .vitem &$interface_port$&
 This is an obsolete name for &$received_ip_address$&.
 
 .vitem &$interface_port$&

-.cindex "&$interface_port$&"
+.vindex "&$interface_port$&"

 This is an obsolete name for &$received_port$&.
 This is an obsolete name for &$received_port$&.

-.wen
+
+.vitem &$item$&
+.vindex "&$item$&"
+This variable is used during the expansion of &*forall*& and &*forany*&
+conditions (see section &<<SECTexpcond>>&), and &*filter*&, &*man*&, and
+&*reduce*& items (see section &<<SECTexpcond>>&). In other circumstances, it is
+empty.

 
 .vitem &$ldap_dn$&
 
 .vitem &$ldap_dn$&

-.cindex "&$ldap_dn$&"
+.vindex "&$ldap_dn$&"

 This variable, which is available only when Exim is compiled with LDAP support,
 contains the DN from the last entry in the most recently successful LDAP
 lookup.
 
 .vitem &$load_average$&
 This variable, which is available only when Exim is compiled with LDAP support,
 contains the DN from the last entry in the most recently successful LDAP
 lookup.
 
 .vitem &$load_average$&

-.cindex "&$load_average$&"
-This variable contains the system load average, multiplied by 1000 to that it
+.vindex "&$load_average$&"
+This variable contains the system load average, multiplied by 1000 so that it

 is an integer. For example, if the load average is 0.21, the value of the
 variable is 210. The value is recomputed every time the variable is referenced.
 
 .vitem &$local_part$&
 is an integer. For example, if the load average is 0.21, the value of the
 variable is 210. The value is recomputed every time the variable is referenced.
 
 .vitem &$local_part$&

-.cindex "&$local_part$&"
+.vindex "&$local_part$&"

 When an address is being routed, or delivered on its own, this
 variable contains the local part. When a number of addresses are being
 delivered together (for example, multiple RCPT commands in an SMTP
 When an address is being routed, or delivered on its own, this
 variable contains the local part. When a number of addresses are being
 delivered together (for example, multiple RCPT commands in an SMTP


@@ -10512,8 +10779,8 @@ Global address rewriting happens when a message is received, so the value of
 because a message may have many recipients and the system filter is called just
 once.
 
 because a message may have many recipients and the system filter is called just
 once.
 

-.cindex "&$local_part_prefix$&"
-.cindex "&$local_part_suffix$&"
+.vindex "&$local_part_prefix$&"
+.vindex "&$local_part_suffix$&"

 If a local part prefix or suffix has been recognized, it is not included in the
 value of &$local_part$& during routing and subsequent delivery. The values of
 any prefix or suffix are in &$local_part_prefix$& and
 If a local part prefix or suffix has been recognized, it is not included in the
 value of &$local_part$& during routing and subsequent delivery. The values of
 any prefix or suffix are in &$local_part_prefix$& and


@@ -10552,7 +10819,7 @@ to process local parts in a case-dependent manner in a router, you can set the
 &%caseful_local_part%& option (see chapter &<<CHAProutergeneric>>&).
 
 .vitem &$local_part_data$&
 &%caseful_local_part%& option (see chapter &<<CHAProutergeneric>>&).
 
 .vitem &$local_part_data$&

-.cindex "&$local_part_data$&"
+.vindex "&$local_part_data$&"

 When the &%local_parts%& option on a router matches a local part by means of a
 lookup, the data read by the lookup is available during the running of the
 router as &$local_part_data$&. In addition, if the driver routes the address
 When the &%local_parts%& option on a router matches a local part by means of a
 lookup, the data read by the lookup is available during the running of the
 router as &$local_part_data$&. In addition, if the driver routes the address


@@ -10565,28 +10832,28 @@ available during the rest of the ACL statement. In all other situations, this
 variable expands to nothing.
 
 .vitem &$local_part_prefix$&
 variable expands to nothing.
 
 .vitem &$local_part_prefix$&

-.cindex "&$local_part_prefix$&"
+.vindex "&$local_part_prefix$&"

 When an address is being routed or delivered, and a
 specific prefix for the local part was recognized, it is available in this
 variable, having been removed from &$local_part$&.
 
 .vitem &$local_part_suffix$&
 When an address is being routed or delivered, and a
 specific prefix for the local part was recognized, it is available in this
 variable, having been removed from &$local_part$&.
 
 .vitem &$local_part_suffix$&

-.cindex "&$local_part_suffix$&"
+.vindex "&$local_part_suffix$&"

 When an address is being routed or delivered, and a
 specific suffix for the local part was recognized, it is available in this
 variable, having been removed from &$local_part$&.
 
 .vitem &$local_scan_data$&
 When an address is being routed or delivered, and a
 specific suffix for the local part was recognized, it is available in this
 variable, having been removed from &$local_part$&.
 
 .vitem &$local_scan_data$&

-.cindex "&$local_scan_data$&"
+.vindex "&$local_scan_data$&"

 This variable contains the text returned by the &[local_scan()]& function when
 a message is received. See chapter &<<CHAPlocalscan>>& for more details.
 
 .vitem &$local_user_gid$&
 This variable contains the text returned by the &[local_scan()]& function when
 a message is received. See chapter &<<CHAPlocalscan>>& for more details.
 
 .vitem &$local_user_gid$&

-.cindex "&$local_user_gid$&"
+.vindex "&$local_user_gid$&"

 See &$local_user_uid$&.
 
 .vitem &$local_user_uid$&
 See &$local_user_uid$&.
 
 .vitem &$local_user_uid$&

-.cindex "&$local_user_uid$&"
+.vindex "&$local_user_uid$&"

 This variable and &$local_user_gid$& are set to the uid and gid after the
 &%check_local_user%& router precondition succeeds. This means that their values
 are available for the remaining preconditions (&%senders%&, &%require_files%&,
 This variable and &$local_user_gid$& are set to the uid and gid after the
 &%check_local_user%& router precondition succeeds. This means that their values
 are available for the remaining preconditions (&%senders%&, &%require_files%&,


@@ -10595,20 +10862,20 @@ router-specific expansions. At all other times, the values in these variables
 are &`(uid_t)(-1)`& and &`(gid_t)(-1)`&, respectively.
 
 .vitem &$localhost_number$&
 are &`(uid_t)(-1)`& and &`(gid_t)(-1)`&, respectively.
 
 .vitem &$localhost_number$&

-.cindex "&$localhost_number$&"
+.vindex "&$localhost_number$&"

 This contains the expanded value of the
 &%localhost_number%& option. The expansion happens after the main options have
 been read.
 
 .vitem &$log_inodes$&
 This contains the expanded value of the
 &%localhost_number%& option. The expansion happens after the main options have
 been read.
 
 .vitem &$log_inodes$&

-.cindex "&$log_inodes$&"
+.vindex "&$log_inodes$&"

 The number of free inodes in the disk partition where Exim's
 log files are being written. The value is recalculated whenever the variable is
 referenced. If the relevant file system does not have the concept of inodes,
 the value of is -1. See also the &%check_log_inodes%& option.
 
 .vitem &$log_space$&
 The number of free inodes in the disk partition where Exim's
 log files are being written. The value is recalculated whenever the variable is
 referenced. If the relevant file system does not have the concept of inodes,
 the value of is -1. See also the &%check_log_inodes%& option.
 
 .vitem &$log_space$&

-.cindex "&$log_space$&"
+.vindex "&$log_space$&"

 The amount of free space (as a number of kilobytes) in the disk
 partition where Exim's log files are being written. The value is recalculated
 whenever the variable is referenced. If the operating system does not have the
 The amount of free space (as a number of kilobytes) in the disk
 partition where Exim's log files are being written. The value is recalculated
 whenever the variable is referenced. If the operating system does not have the


@@ -10617,7 +10884,7 @@ the space value is -1. See also the &%check_log_space%& option.
 
 
 .vitem &$mailstore_basename$&
 
 
 .vitem &$mailstore_basename$&

-.cindex "&$mailstore_basename$&"
+.vindex "&$mailstore_basename$&"

 This variable is set only when doing deliveries in &"mailstore"& format in the
 &(appendfile)& transport. During the expansion of the &%mailstore_prefix%&,
 &%mailstore_suffix%&, &%message_prefix%&, and &%message_suffix%& options, it
 This variable is set only when doing deliveries in &"mailstore"& format in the
 &(appendfile)& transport. During the expansion of the &%mailstore_prefix%&,
 &%mailstore_suffix%&, &%message_prefix%&, and &%message_suffix%& options, it


@@ -10626,15 +10893,22 @@ without the &".tmp"&, &".env"&, or &".msg"& suffix. At all other times, this
 variable is empty.
 
 .vitem &$malware_name$&
 variable is empty.
 
 .vitem &$malware_name$&

-.cindex "&$malware_name$&"
+.vindex "&$malware_name$&"

 This variable is available when Exim is compiled with the
 content-scanning extension. It is set to the name of the virus that was found
 when the ACL &%malware%& condition is true (see section &<<SECTscanvirus>>&).
 
 This variable is available when Exim is compiled with the
 content-scanning extension. It is set to the name of the virus that was found
 when the ACL &%malware%& condition is true (see section &<<SECTscanvirus>>&).
 

+.vitem &$max_received_linelength$&
+.vindex "&$max_received_linelength$&"
+.cindex "maximum" "line length"
+.cindex "line length" "maximum"
+This variable contains the number of bytes in the longest line that was
+received as part of the message, not counting the line termination
+character(s).

 
 .vitem &$message_age$&
 .cindex "message" "age of"
 
 .vitem &$message_age$&
 .cindex "message" "age of"

-.cindex "&$message_age$&"
+.vindex "&$message_age$&"

 This variable is set at the start of a delivery attempt to contain the number
 of seconds since the message was received. It does not change during a single
 delivery attempt.
 This variable is set at the start of a delivery attempt to contain the number
 of seconds since the message was received. It does not change during a single
 delivery attempt.


@@ -10643,19 +10917,23 @@ delivery attempt.
 .cindex "body of message" "expansion variable"
 .cindex "message body" "in expansion"
 .cindex "binary zero" "in message body"
 .cindex "body of message" "expansion variable"
 .cindex "message body" "in expansion"
 .cindex "binary zero" "in message body"

-.cindex "&$message_body$&"
-This variable contains the initial portion of a message's
-body while it is being delivered, and is intended mainly for use in filter
-files. The maximum number of characters of the body that are put into the
-variable is set by the &%message_body_visible%& configuration option; the
-default is 500. Newlines are converted into spaces to make it easier to search
-for phrases that might be split over a line break.
-Binary zeros are also converted into spaces.
+.vindex "&$message_body$&"
+.oindex "&%message_body_visible%&"
+This variable contains the initial portion of a message's body while it is
+being delivered, and is intended mainly for use in filter files. The maximum
+number of characters of the body that are put into the variable is set by the
+&%message_body_visible%& configuration option; the default is 500.
+
+.oindex "&%message_body_newlines%&"
+By default, newlines are converted into spaces in &$message_body$&, to make it
+easier to search for phrases that might be split over a line break. However,
+this can be disabled by setting &%message_body_newlines%& to be true. Binary
+zeros are always converted into spaces.

 
 .vitem &$message_body_end$&
 .cindex "body of message" "expansion variable"
 .cindex "message body" "in expansion"
 
 .vitem &$message_body_end$&
 .cindex "body of message" "expansion variable"
 .cindex "message body" "in expansion"

-.cindex "&$message_body_end$&"
+.vindex "&$message_body_end$&"

 This variable contains the final portion of a message's
 body while it is being delivered. The format and maximum size are as for
 &$message_body$&.
 This variable contains the final portion of a message's
 body while it is being delivered. The format and maximum size are as for
 &$message_body$&.


@@ -10663,14 +10941,14 @@ body while it is being delivered. The format and maximum size are as for
 .vitem &$message_body_size$&
 .cindex "body of message" "size"
 .cindex "message body" "size"
 .vitem &$message_body_size$&
 .cindex "body of message" "size"
 .cindex "message body" "size"

-.cindex "&$message_body_size$&"
+.vindex "&$message_body_size$&"

 When a message is being delivered, this variable contains the size of the body
 in bytes. The count starts from the character after the blank line that
 separates the body from the header. Newlines are included in the count. See
 also &$message_size$&, &$body_linecount$&, and &$body_zerocount$&.
 
 .vitem &$message_exim_id$&
 When a message is being delivered, this variable contains the size of the body
 in bytes. The count starts from the character after the blank line that
 separates the body from the header. Newlines are included in the count. See
 also &$message_size$&, &$body_linecount$&, and &$body_zerocount$&.
 
 .vitem &$message_exim_id$&

-.cindex "&$message_exim_id$&"
+.vindex "&$message_exim_id$&"

 When a message is being received or delivered, this variable contains the
 unique message id that is generated and used by Exim to identify the message.
 An id is not created for a message until after its header has been successfully
 When a message is being received or delivered, this variable contains the
 unique message id that is generated and used by Exim to identify the message.
 An id is not created for a message until after its header has been successfully


@@ -10679,24 +10957,22 @@ line; it is the local id that Exim assigns to the message, for example:
 &`1BXTIK-0001yO-VA`&.
 
 .vitem &$message_headers$&
 &`1BXTIK-0001yO-VA`&.
 
 .vitem &$message_headers$&

-.new
-.cindex &$message_headers$&
+.vindex &$message_headers$&

 This variable contains a concatenation of all the header lines when a message
 is being processed, except for lines added by routers or transports. The header
 lines are separated by newline characters. Their contents are decoded in the
 same way as a header line that is inserted by &%bheader%&.
 
 .vitem &$message_headers_raw$&
 This variable contains a concatenation of all the header lines when a message
 is being processed, except for lines added by routers or transports. The header
 lines are separated by newline characters. Their contents are decoded in the
 same way as a header line that is inserted by &%bheader%&.
 
 .vitem &$message_headers_raw$&

-.cindex &$message_headers_raw$&
+.vindex &$message_headers_raw$&

 This variable is like &$message_headers$& except that no processing of the
 contents of header lines is done.
 This variable is like &$message_headers$& except that no processing of the
 contents of header lines is done.

-.wen

 
 .vitem &$message_id$&
 This is an old name for &$message_exim_id$&, which is now deprecated.
 
 .vitem &$message_linecount$&
 
 .vitem &$message_id$&
 This is an old name for &$message_exim_id$&, which is now deprecated.
 
 .vitem &$message_linecount$&

-.cindex "&$message_linecount$&"
+.vindex "&$message_linecount$&"

 This variable contains the total number of lines in the header and body of the
 message. Compare &$body_linecount$&, which is the count for the body only.
 During the DATA and content-scanning ACLs, &$message_linecount$& contains the
 This variable contains the total number of lines in the header and body of the
 message. Compare &$body_linecount$&, which is the count for the body only.
 During the DATA and content-scanning ACLs, &$message_linecount$& contains the


@@ -10709,7 +10985,7 @@ a DATA ACL:
 .code
 deny message   = Too many lines in message header
      condition = \
 .code
 deny message   = Too many lines in message header
      condition = \

-       ${if <{250}{${eval:$message_linecount - $body_linecount}}}
+      ${if <{250}{${eval:$message_linecount - $body_linecount}}}

 .endd
 In the MAIL and RCPT ACLs, the value is zero because at that stage the
 message has not yet been received.
 .endd
 In the MAIL and RCPT ACLs, the value is zero because at that stage the
 message has not yet been received.


@@ -10717,7 +10993,7 @@ message has not yet been received.
 .vitem &$message_size$&
 .cindex "size" "of message"
 .cindex "message" "size"
 .vitem &$message_size$&
 .cindex "size" "of message"
 .cindex "message" "size"

-.cindex "&$message_size$&"
+.vindex "&$message_size$&"

 When a message is being processed, this variable contains its size in bytes. In
 most cases, the size includes those headers that were received with the
 message, but not those (such as &'Envelope-to:'&) that are added to individual
 When a message is being processed, this variable contains its size in bytes. In
 most cases, the size includes those headers that were received with the
 message, but not those (such as &'Envelope-to:'&) that are added to individual


@@ -10742,8 +11018,8 @@ These variables are counters that can be incremented by means
 of the &%add%& command in filter files.
 
 .vitem &$original_domain$&
 of the &%add%& command in filter files.
 
 .vitem &$original_domain$&

-.cindex "&$domain$&"
-.cindex "&$original_domain$&"
+.vindex "&$domain$&"
+.vindex "&$original_domain$&"

 When a top-level address is being processed for delivery, this contains the
 same value as &$domain$&. However, if a &"child"& address (for example,
 generated by an alias, forward, or filter file) is being processed, this
 When a top-level address is being processed for delivery, this contains the
 same value as &$domain$&. However, if a &"child"& address (for example,
 generated by an alias, forward, or filter file) is being processed, this


@@ -10757,8 +11033,8 @@ filter, it is set up with an artificial &"parent"& address. This has the local
 part &'system-filter'& and the default qualify domain.
 
 .vitem &$original_local_part$&
 part &'system-filter'& and the default qualify domain.
 
 .vitem &$original_local_part$&

-.cindex "&$local_part$&"
-.cindex "&$original_local_part$&"
+.vindex "&$local_part$&"
+.vindex "&$original_local_part$&"

 When a top-level address is being processed for delivery, this contains the
 same value as &$local_part$&, unless a prefix or suffix was removed from the
 local part, because &$original_local_part$& always contains the full local
 When a top-level address is being processed for delivery, this contains the
 same value as &$local_part$&, unless a prefix or suffix was removed from the
 local part, because &$original_local_part$& always contains the full local


@@ -10779,8 +11055,8 @@ part &'system-filter'& and the default qualify domain.
 .vitem &$originator_gid$&
 .cindex "gid (group id)" "of originating user"
 .cindex "sender" "gid"
 .vitem &$originator_gid$&
 .cindex "gid (group id)" "of originating user"
 .cindex "sender" "gid"

-.cindex "&$caller_gid$&"
-.cindex "&$originator_gid$&"
+.vindex "&$caller_gid$&"
+.vindex "&$originator_gid$&"

 This variable contains the value of &$caller_gid$& that was set when the
 message was received. For messages received via the command line, this is the
 gid of the sending user. For messages received by SMTP over TCP/IP, this is
 This variable contains the value of &$caller_gid$& that was set when the
 message was received. For messages received via the command line, this is the
 gid of the sending user. For messages received by SMTP over TCP/IP, this is


@@ -10789,32 +11065,32 @@ normally the gid of the Exim user.
 .vitem &$originator_uid$&
 .cindex "uid (user id)" "of originating user"
 .cindex "sender" "uid"
 .vitem &$originator_uid$&
 .cindex "uid (user id)" "of originating user"
 .cindex "sender" "uid"

-.cindex "&$caller_uid$&"
-.cindex "&$originaltor_uid$&"
+.vindex "&$caller_uid$&"
+.vindex "&$originaltor_uid$&"

 The value of &$caller_uid$& that was set when the message was received. For
 messages received via the command line, this is the uid of the sending user.
 For messages received by SMTP over TCP/IP, this is normally the uid of the Exim
 user.
 
 .vitem &$parent_domain$&
 The value of &$caller_uid$& that was set when the message was received. For
 messages received via the command line, this is the uid of the sending user.
 For messages received by SMTP over TCP/IP, this is normally the uid of the Exim
 user.
 
 .vitem &$parent_domain$&

-.cindex "&$parent_domain$&"
+.vindex "&$parent_domain$&"

 This variable is similar to &$original_domain$& (see
 above), except that it refers to the immediately preceding parent address.
 
 .vitem &$parent_local_part$&
 This variable is similar to &$original_domain$& (see
 above), except that it refers to the immediately preceding parent address.
 
 .vitem &$parent_local_part$&

-.cindex "&$parent_local_part$&"
+.vindex "&$parent_local_part$&"

 This variable is similar to &$original_local_part$&
 (see above), except that it refers to the immediately preceding parent address.
 
 .vitem &$pid$&
 .cindex "pid (process id)" "of current process"
 This variable is similar to &$original_local_part$&
 (see above), except that it refers to the immediately preceding parent address.
 
 .vitem &$pid$&
 .cindex "pid (process id)" "of current process"

-.cindex "&$pid$&"
+.vindex "&$pid$&"

 This variable contains the current process id.
 
 .vitem &$pipe_addresses$&
 .cindex "filter" "transport filter"
 .cindex "transport" "filter"
 This variable contains the current process id.
 
 .vitem &$pipe_addresses$&
 .cindex "filter" "transport filter"
 .cindex "transport" "filter"

-.cindex "&$pipe_addresses$&"
+.vindex "&$pipe_addresses$&"

 This is not an expansion variable, but is mentioned here because the string
 &`$pipe_addresses`& is handled specially in the command specification for the
 &(pipe)& transport (chapter &<<CHAPpipetransport>>&) and in transport filters
 This is not an expansion variable, but is mentioned here because the string
 &`$pipe_addresses`& is handled specially in the command specification for the
 &(pipe)& transport (chapter &<<CHAPpipetransport>>&) and in transport filters


@@ -10823,7 +11099,7 @@ It cannot be used in general expansion strings, and provokes an &"unknown
 variable"& error if encountered.
 
 .vitem &$primary_hostname$&
 variable"& error if encountered.
 
 .vitem &$primary_hostname$&

-.cindex "&$primary_hostname$&"
+.vindex "&$primary_hostname$&"

 This variable contains the value set by &%primary_hostname%& in the
 configuration file, or read by the &[uname()]& function. If &[uname()]& returns
 a single-component name, Exim calls &[gethostbyname()]& (or
 This variable contains the value set by &%primary_hostname%& in the
 configuration file, or read by the &[uname()]& function. If &[uname()]& returns
 a single-component name, Exim calls &[gethostbyname()]& (or


@@ -10847,50 +11123,49 @@ which is described in sections &<<SECTexpansionitems>>& and
 &<<SECTverifyPRVS>>&.
 
 .vitem &$qualify_domain$&
 &<<SECTverifyPRVS>>&.
 
 .vitem &$qualify_domain$&

-.cindex "&$qualify_domain$&"
+.vindex "&$qualify_domain$&"

 The value set for the &%qualify_domain%& option in the configuration file.
 
 .vitem &$qualify_recipient$&
 The value set for the &%qualify_domain%& option in the configuration file.
 
 .vitem &$qualify_recipient$&

-.cindex "&$qualify_recipient$&"
+.vindex "&$qualify_recipient$&"

 The value set for the &%qualify_recipient%& option in the configuration file,
 or if not set, the value of &$qualify_domain$&.
 
 .vitem &$rcpt_count$&
 The value set for the &%qualify_recipient%& option in the configuration file,
 or if not set, the value of &$qualify_domain$&.
 
 .vitem &$rcpt_count$&

-.cindex "&$rcpt_count$&"
+.vindex "&$rcpt_count$&"

 When a message is being received by SMTP, this variable contains the number of
 RCPT commands received for the current message. If this variable is used in a
 RCPT ACL, its value includes the current command.
 
 .vitem &$rcpt_defer_count$&
 When a message is being received by SMTP, this variable contains the number of
 RCPT commands received for the current message. If this variable is used in a
 RCPT ACL, its value includes the current command.
 
 .vitem &$rcpt_defer_count$&

-.cindex "&$rcpt_defer_count$&"
+.vindex "&$rcpt_defer_count$&"

 .cindex "4&'xx'& responses" "count of"
 When a message is being received by SMTP, this variable contains the number of
 RCPT commands in the current message that have previously been rejected with a
 temporary (4&'xx'&) response.
 
 .vitem &$rcpt_fail_count$&
 .cindex "4&'xx'& responses" "count of"
 When a message is being received by SMTP, this variable contains the number of
 RCPT commands in the current message that have previously been rejected with a
 temporary (4&'xx'&) response.
 
 .vitem &$rcpt_fail_count$&

-.cindex "&$rcpt_fail_count$&"
+.vindex "&$rcpt_fail_count$&"

 When a message is being received by SMTP, this variable contains the number of
 RCPT commands in the current message that have previously been rejected with a
 permanent (5&'xx'&) response.
 
 .vitem &$received_count$&
 When a message is being received by SMTP, this variable contains the number of
 RCPT commands in the current message that have previously been rejected with a
 permanent (5&'xx'&) response.
 
 .vitem &$received_count$&

-.cindex "&$received_count$&"
+.vindex "&$received_count$&"

 This variable contains the number of &'Received:'& header lines in the message,
 including the one added by Exim (so its value is always greater than zero). It
 is available in the DATA ACL, the non-SMTP ACL, and while routing and
 delivering.
 
 .vitem &$received_for$&
 This variable contains the number of &'Received:'& header lines in the message,
 including the one added by Exim (so its value is always greater than zero). It
 is available in the DATA ACL, the non-SMTP ACL, and while routing and
 delivering.
 
 .vitem &$received_for$&

-.cindex "&$received_for$&"
+.vindex "&$received_for$&"

 If there is only a single recipient address in an incoming message, this
 variable contains that address when the &'Received:'& header line is being
 built. The value is copied after recipient rewriting has happened, but before
 the &[local_scan()]& function is run.
 
 If there is only a single recipient address in an incoming message, this
 variable contains that address when the &'Received:'& header line is being
 built. The value is copied after recipient rewriting has happened, but before
 the &[local_scan()]& function is run.
 

-.new

 .vitem &$received_ip_address$&
 .vitem &$received_ip_address$&

-.cindex "&$received_ip_address$&"
+.vindex "&$received_ip_address$&"

 As soon as an Exim server starts processing an incoming TCP/IP connection, this
 variable is set to the address of the local IP interface, and &$received_port$&
 is set to the local port number. (The remote IP address and port are in
 As soon as an Exim server starts processing an incoming TCP/IP connection, this
 variable is set to the address of the local IP interface, and &$received_port$&
 is set to the local port number. (The remote IP address and port are in


@@ -10910,12 +11185,11 @@ the values are unknown (unless they are explicitly set by options of the
 &(smtp)& transport).
 
 .vitem &$received_port$&
 &(smtp)& transport).
 
 .vitem &$received_port$&

-.cindex "&$received_port$&"
+.vindex "&$received_port$&"

 See &$received_ip_address$&.
 See &$received_ip_address$&.

-.wen

 
 .vitem &$received_protocol$&
 
 .vitem &$received_protocol$&

-.cindex "&$received_protocol$&"
+.vindex "&$received_protocol$&"

 When a message is being processed, this variable contains the name of the
 protocol by which it was received. Most of the names used by Exim are defined
 by RFCs 821, 2821, and 3848. They start with &"smtp"& (the client used HELO) or
 When a message is being processed, this variable contains the name of the
 protocol by which it was received. Most of the names used by Exim are defined
 by RFCs 821, 2821, and 3848. They start with &"smtp"& (the client used HELO) or


@@ -10936,12 +11210,12 @@ messages that are injected locally by trusted callers. This is commonly used to
 identify messages that are being re-injected after some kind of scanning.
 
 .vitem &$received_time$&
 identify messages that are being re-injected after some kind of scanning.
 
 .vitem &$received_time$&

-.cindex "&$received_time$&"
+.vindex "&$received_time$&"

 This variable contains the date and time when the current message was received,
 as a number of seconds since the start of the Unix epoch.
 
 .vitem &$recipient_data$&
 This variable contains the date and time when the current message was received,
 as a number of seconds since the start of the Unix epoch.
 
 .vitem &$recipient_data$&

-.cindex "&$recipient_data$&"
+.vindex "&$recipient_data$&"

 This variable is set after an indexing lookup success in an ACL &%recipients%&
 condition. It contains the data from the lookup, and the value remains set
 until the next &%recipients%& test. Thus, you can do things like this:
 This variable is set after an indexing lookup success in an ACL &%recipients%&
 condition. It contains the data from the lookup, and the value remains set
 until the next &%recipients%& test. Thus, you can do things like this:


@@ -10955,7 +11229,7 @@ The variable is not set for a lookup that is used as part of the string
 expansion that all such lists undergo before being interpreted.
 
 .vitem &$recipient_verify_failure$&
 expansion that all such lists undergo before being interpreted.
 
 .vitem &$recipient_verify_failure$&

-.cindex "&$recipient_verify_failure$&"
+.vindex "&$recipient_verify_failure$&"

 In an ACL, when a recipient verification fails, this variable contains
 information about the failure. It is set to one of the following words:
 
 In an ACL, when a recipient verification fails, this variable contains
 information about the failure. It is set to one of the following words:
 


@@ -10982,12 +11256,12 @@ The main use of this variable is expected to be to distinguish between
 rejections of MAIL and rejections of RCPT.
 
 .vitem &$recipients$&
 rejections of MAIL and rejections of RCPT.
 
 .vitem &$recipients$&

-.cindex "&$recipients$&"
-This variable contains a list of envelope recipients for a
-message. A comma and a space separate the addresses in the replacement text.
-However, the variable is not generally available, to prevent exposure of Bcc
-recipients in unprivileged users' filter files. You can use &$recipients$& only
-in these two cases:
+.vindex "&$recipients$&"
+This variable contains a list of envelope recipients for a message. A comma and
+a space separate the addresses in the replacement text. However, the variable
+is not generally available, to prevent exposure of Bcc recipients in
+unprivileged users' filter files. You can use &$recipients$& only in these
+cases:

 
 .olist
 In a system filter file.
 
 .olist
 In a system filter file.


@@ -10996,11 +11270,13 @@ In the ACLs associated with the DATA command and with non-SMTP messages, that
 is, the ACLs defined by &%acl_smtp_predata%&, &%acl_smtp_data%&,
 &%acl_smtp_mime%&, &%acl_not_smtp_start%&, &%acl_not_smtp%&, and
 &%acl_not_smtp_mime%&.
 is, the ACLs defined by &%acl_smtp_predata%&, &%acl_smtp_data%&,
 &%acl_smtp_mime%&, &%acl_not_smtp_start%&, &%acl_not_smtp%&, and
 &%acl_not_smtp_mime%&.

+.next
+From within a &[local_scan()]& function.

 .endlist
 
 
 .vitem &$recipients_count$&
 .endlist
 
 
 .vitem &$recipients_count$&

-.cindex "&$recipients_count$&"
+.vindex "&$recipients_count$&"

 When a message is being processed, this variable contains the number of
 envelope recipients that came with the message. Duplicates are not excluded
 from the count. While a message is being received over SMTP, the number
 When a message is being processed, this variable contains the number of
 envelope recipients that came with the message. Duplicates are not excluded
 from the count. While a message is being received over SMTP, the number


@@ -11008,13 +11284,13 @@ increases for each accepted recipient. It can be referenced in an ACL.
 
 
 .vitem &$regex_match_string$&
 
 
 .vitem &$regex_match_string$&

-.cindex "&$regex_match_string$&"
+.vindex "&$regex_match_string$&"

 This variable is set to contain the matching regular expression after a
 &%regex%& ACL condition has matched (see section &<<SECTscanregex>>&).
 
 
 .vitem &$reply_address$&
 This variable is set to contain the matching regular expression after a
 &%regex%& ACL condition has matched (see section &<<SECTscanregex>>&).
 
 
 .vitem &$reply_address$&

-.cindex "&$reply_address$&"
+.vindex "&$reply_address$&"

 When a message is being processed, this variable contains the contents of the
 &'Reply-To:'& header line if one exists and it is not empty, or otherwise the
 contents of the &'From:'& header line. Apart from the removal of leading
 When a message is being processed, this variable contains the contents of the
 &'Reply-To:'& header line if one exists and it is not empty, or otherwise the
 contents of the &'From:'& header line. Apart from the removal of leading


@@ -11022,7 +11298,7 @@ white space, the value is not processed in any way. In particular, no RFC 2047
 decoding or character code translation takes place.
 
 .vitem &$return_path$&
 decoding or character code translation takes place.
 
 .vitem &$return_path$&

-.cindex "&$return_path$&"
+.vindex "&$return_path$&"

 When a message is being delivered, this variable contains the return path &--
 the sender field that will be sent as part of the envelope. It is not enclosed
 in <> characters. At the start of routing an address, &$return_path$& has the
 When a message is being delivered, this variable contains the return path &--
 the sender field that will be sent as part of the envelope. It is not enclosed
 in <> characters. At the start of routing an address, &$return_path$& has the


@@ -11035,12 +11311,12 @@ the incoming envelope sender, and &$return_path$& contains the outgoing
 envelope sender.
 
 .vitem &$return_size_limit$&
 envelope sender.
 
 .vitem &$return_size_limit$&

-.cindex "&$return_size_limit$&"
+.vindex "&$return_size_limit$&"

 This is an obsolete name for &$bounce_return_size_limit$&.
 
 .vitem &$runrc$&
 .cindex "return code" "from &%run%& expansion"
 This is an obsolete name for &$bounce_return_size_limit$&.
 
 .vitem &$runrc$&
 .cindex "return code" "from &%run%& expansion"

-.cindex "&$runrc$&"
+.vindex "&$runrc$&"

 This variable contains the return code from a command that is run by the
 &%${run...}%& expansion item. &*Warning*&: In a router or transport, you cannot
 assume the order in which option values are expanded, except for those
 This variable contains the return code from a command that is run by the
 &%${run...}%& expansion item. &*Warning*&: In a router or transport, you cannot
 assume the order in which option values are expanded, except for those


@@ -11049,8 +11325,8 @@ reliably expect to set &$runrc$& by the expansion of one option, and use it in
 another.
 
 .vitem &$self_hostname$&
 another.
 
 .vitem &$self_hostname$&

-.cindex "&%self%& option" "value of host name"
-.cindex "&$self_hostname$&"
+.oindex "&%self%&" "value of host name"
+.vindex "&$self_hostname$&"

 When an address is routed to a supposedly remote host that turns out to be the
 local host, what happens is controlled by the &%self%& generic router option.
 One of its values causes the address to be passed to another router. When this
 When an address is routed to a supposedly remote host that turns out to be the
 local host, what happens is controlled by the &%self%& generic router option.
 One of its values causes the address to be passed to another router. When this


@@ -11058,17 +11334,15 @@ happens, &$self_hostname$& is set to the name of the local host that the
 original router encountered. In other circumstances its contents are null.
 
 .vitem &$sender_address$&
 original router encountered. In other circumstances its contents are null.
 
 .vitem &$sender_address$&

-.new
-.cindex "&$sender_address$&"
+.vindex "&$sender_address$&"

 When a message is being processed, this variable contains the sender's address
 that was received in the message's envelope. The case of letters in the address
 is retained, in both the local part and the domain. For bounce messages, the
 value of this variable is the empty string. See also &$return_path$&.
 When a message is being processed, this variable contains the sender's address
 that was received in the message's envelope. The case of letters in the address
 is retained, in both the local part and the domain. For bounce messages, the
 value of this variable is the empty string. See also &$return_path$&.

-.wen

 
 .vitem &$sender_address_data$&
 
 .vitem &$sender_address_data$&

-.cindex "&$address_data$&"
-.cindex "&$sender_address_data$&"
+.vindex "&$address_data$&"
+.vindex "&$sender_address_data$&"

 If &$address_data$& is set when the routers are called from an ACL to verify a
 sender address, the final value is preserved in &$sender_address_data$&, to
 distinguish it from data from a recipient address. The value does not persist
 If &$address_data$& is set when the routers are called from an ACL to verify a
 sender address, the final value is preserved in &$sender_address_data$&, to
 distinguish it from data from a recipient address. The value does not persist


@@ -11076,15 +11350,15 @@ after the end of the current ACL statement. If you want to preserve it for
 longer, you can save it in an ACL variable.
 
 .vitem &$sender_address_domain$&
 longer, you can save it in an ACL variable.
 
 .vitem &$sender_address_domain$&

-.cindex "&$sender_address_domain$&"
+.vindex "&$sender_address_domain$&"

 The domain portion of &$sender_address$&.
 
 .vitem &$sender_address_local_part$&
 The domain portion of &$sender_address$&.
 
 .vitem &$sender_address_local_part$&

-.cindex "&$sender_address_local_part$&"
+.vindex "&$sender_address_local_part$&"

 The local part portion of &$sender_address$&.
 
 .vitem &$sender_data$&
 The local part portion of &$sender_address$&.
 
 .vitem &$sender_data$&

-.cindex "&$sender_data$&"
+.vindex "&$sender_data$&"

 This variable is set after a lookup success in an ACL &%senders%& condition or
 in a router &%senders%& option. It contains the data from the lookup, and the
 value remains set until the next &%senders%& test. Thus, you can do things like
 This variable is set after a lookup success in an ACL &%senders%& condition or
 in a router &%senders%& option. It contains the data from the lookup, and the
 value remains set until the next &%senders%& test. Thus, you can do things like


@@ -11099,7 +11373,7 @@ The variable is not set for a lookup that is used as part of the string
 expansion that all such lists undergo before being interpreted.
 
 .vitem &$sender_fullhost$&
 expansion that all such lists undergo before being interpreted.
 
 .vitem &$sender_fullhost$&

-.cindex "&$sender_fullhost$&"
+.vindex "&$sender_fullhost$&"

 When a message is received from a remote host, this variable contains the host
 name and IP address in a single string. It ends with the IP address in square
 brackets, followed by a colon and a port number if the logging of ports is
 When a message is received from a remote host, this variable contains the host
 name and IP address in a single string. It ends with the IP address in square
 brackets, followed by a colon and a port number if the logging of ports is


@@ -11113,31 +11387,31 @@ the argument of a HELO or EHLO command. This is omitted if it is identical to
 the verified host name or to the host's IP address in square brackets.
 
 .vitem &$sender_helo_name$&
 the verified host name or to the host's IP address in square brackets.
 
 .vitem &$sender_helo_name$&

-.cindex "&$sender_helo_name$&"
+.vindex "&$sender_helo_name$&"

 When a message is received from a remote host that has issued a HELO or EHLO
 command, the argument of that command is placed in this variable. It is also
 set if HELO or EHLO is used when a message is received using SMTP locally via
 the &%-bs%& or &%-bS%& options.
 
 .vitem &$sender_host_address$&
 When a message is received from a remote host that has issued a HELO or EHLO
 command, the argument of that command is placed in this variable. It is also
 set if HELO or EHLO is used when a message is received using SMTP locally via
 the &%-bs%& or &%-bS%& options.
 
 .vitem &$sender_host_address$&

-.cindex "&$sender_host_address$&"
+.vindex "&$sender_host_address$&"

 When a message is received from a remote host, this variable contains that
 host's IP address. For locally submitted messages, it is empty.
 
 .vitem &$sender_host_authenticated$&
 When a message is received from a remote host, this variable contains that
 host's IP address. For locally submitted messages, it is empty.
 
 .vitem &$sender_host_authenticated$&

-.cindex "&$sender_host_authenticated$&"
+.vindex "&$sender_host_authenticated$&"

 This variable contains the name (not the public name) of the authenticator
 driver that successfully authenticated the client from which the message was
 received. It is empty if there was no successful authentication. See also
 &$authenticated_id$&.
 
 .vitem &$sender_host_name$&
 This variable contains the name (not the public name) of the authenticator
 driver that successfully authenticated the client from which the message was
 received. It is empty if there was no successful authentication. See also
 &$authenticated_id$&.
 
 .vitem &$sender_host_name$&

-.cindex "&$sender_host_name$&"
+.vindex "&$sender_host_name$&"

 When a message is received from a remote host, this variable contains the
 host's name as obtained by looking up its IP address. For messages received by
 other means, this variable is empty.
 
 When a message is received from a remote host, this variable contains the
 host's name as obtained by looking up its IP address. For messages received by
 other means, this variable is empty.
 

-.cindex "&$host_lookup_failed$&"
+.vindex "&$host_lookup_failed$&"

 If the host name has not previously been looked up, a reference to
 &$sender_host_name$& triggers a lookup (for messages from remote hosts).
 A looked up name is accepted only if it leads back to the original IP address
 If the host name has not previously been looked up, a reference to
 &$sender_host_name$& triggers a lookup (for messages from remote hosts).
 A looked up name is accepted only if it leads back to the original IP address


@@ -11145,7 +11419,7 @@ via a forward lookup. If either the reverse or the forward lookup fails to find
 any data, or if the forward lookup does not yield the original IP address,
 &$sender_host_name$& remains empty, and &$host_lookup_failed$& is set to &"1"&.
 
 any data, or if the forward lookup does not yield the original IP address,
 &$sender_host_name$& remains empty, and &$host_lookup_failed$& is set to &"1"&.
 

-.cindex "&$host_lookup_deferred$&"
+.vindex "&$host_lookup_deferred$&"

 However, if either of the lookups cannot be completed (for example, there is a
 DNS timeout), &$host_lookup_deferred$& is set to &"1"&, and
 &$host_lookup_failed$& remains set to &"0"&.
 However, if either of the lookups cannot be completed (for example, there is a
 DNS timeout), &$host_lookup_deferred$& is set to &"1"&, and
 &$host_lookup_failed$& remains set to &"0"&.


@@ -11188,12 +11462,12 @@ IP address in an EHLO or HELO command.
 
 
 .vitem &$sender_host_port$&
 
 
 .vitem &$sender_host_port$&

-.cindex "&$sender_host_port$&"
+.vindex "&$sender_host_port$&"

 When a message is received from a remote host, this variable contains the port
 number that was used on the remote host.
 
 .vitem &$sender_ident$&
 When a message is received from a remote host, this variable contains the port
 number that was used on the remote host.
 
 .vitem &$sender_ident$&

-.cindex "&$sender_ident$&"
+.vindex "&$sender_ident$&"

 When a message is received from a remote host, this variable contains the
 identification received in response to an RFC 1413 request. When a message has
 been received locally, this variable contains the login name of the user that
 When a message is received from a remote host, this variable contains the
 identification received in response to an RFC 1413 request. When a message has
 been received locally, this variable contains the login name of the user that


@@ -11207,7 +11481,7 @@ A number of variables whose names begin &$sender_rate_$& are set as part of the
 .vitem &$sender_rcvhost$&
 .cindex "DNS" "reverse lookup"
 .cindex "reverse DNS lookup"
 .vitem &$sender_rcvhost$&
 .cindex "DNS" "reverse lookup"
 .cindex "reverse DNS lookup"

-.cindex "&$sender_rcvhost$&"
+.vindex "&$sender_rcvhost$&"

 This is provided specifically for use in &'Received:'& headers. It starts with
 either the verified host name (as obtained from a reverse DNS lookup) or, if
 there is no verified host name, the IP address in square brackets. After that
 This is provided specifically for use in &'Received:'& headers. It starts with
 either the verified host name (as obtained from a reverse DNS lookup) or, if
 there is no verified host name, the IP address in square brackets. After that


@@ -11224,20 +11498,34 @@ all three items are present in the parentheses, a newline and tab are inserted
 into the string, to improve the formatting of the &'Received:'& header.
 
 .vitem &$sender_verify_failure$&
 into the string, to improve the formatting of the &'Received:'& header.
 
 .vitem &$sender_verify_failure$&

-.cindex "&$sender_verify_failure$&"
+.vindex "&$sender_verify_failure$&"

 In an ACL, when a sender verification fails, this variable contains information
 about the failure. The details are the same as for
 &$recipient_verify_failure$&.
 
 In an ACL, when a sender verification fails, this variable contains information
 about the failure. The details are the same as for
 &$recipient_verify_failure$&.
 

+.vitem &$sending_ip_address$&
+.vindex "&$sending_ip_address$&"
+This variable is set whenever an outgoing SMTP connection to another host has
+been set up. It contains the IP address of the local interface that is being
+used. This is useful if a host that has more than one IP address wants to take
+on different personalities depending on which one is being used. For incoming
+connections, see &$received_ip_address$&.
+
+.vitem &$sending_port$&
+.vindex "&$sending_port$&"
+This variable is set whenever an outgoing SMTP connection to another host has
+been set up. It contains the local port that is being used. For incoming
+connections, see &$received_port$&.
+

 .vitem &$smtp_active_hostname$&
 .vitem &$smtp_active_hostname$&

-.cindex "&$smtp_active_hostname$&"
+.vindex "&$smtp_active_hostname$&"

 During an incoming SMTP session, this variable contains the value of the active
 host name, as specified by the &%smtp_active_hostname%& option. The value of
 &$smtp_active_hostname$& is saved with any message that is received, so its
 value can be consulted during routing and delivery.
 
 .vitem &$smtp_command$&
 During an incoming SMTP session, this variable contains the value of the active
 host name, as specified by the &%smtp_active_hostname%& option. The value of
 &$smtp_active_hostname$& is saved with any message that is received, so its
 value can be consulted during routing and delivery.
 
 .vitem &$smtp_command$&

-.cindex "&$smtp_command$&"
+.vindex "&$smtp_command$&"

 During the processing of an incoming SMTP command, this variable contains the
 entire command. This makes it possible to distinguish between HELO and EHLO in
 the HELO ACL, and also to distinguish between commands such as these:
 During the processing of an incoming SMTP command, this variable contains the
 entire command. This makes it possible to distinguish between HELO and EHLO in
 the HELO ACL, and also to distinguish between commands such as these:


@@ -11251,13 +11539,25 @@ rewriting, whereas the values in &$local_part$& and &$domain$& are taken from
 the address after SMTP-time rewriting.
 
 .vitem &$smtp_command_argument$&
 the address after SMTP-time rewriting.
 
 .vitem &$smtp_command_argument$&

-.cindex "SMTP command" "argument for"
-.cindex "&$smtp_command_argument$&"
+.cindex "SMTP" "command, argument for"
+.vindex "&$smtp_command_argument$&"

 While an ACL is running to check an SMTP command, this variable contains the
 argument, that is, the text that follows the command name, with leading white
 space removed. Following the introduction of &$smtp_command$&, this variable is
 somewhat redundant, but is retained for backwards compatibility.
 
 While an ACL is running to check an SMTP command, this variable contains the
 argument, that is, the text that follows the command name, with leading white
 space removed. Following the introduction of &$smtp_command$&, this variable is
 somewhat redundant, but is retained for backwards compatibility.
 

+.vitem &$smtp_count_at_connection_start$&
+.vindex "&$smtp_count_at_connection_start$&"
+This variable is set greater than zero only in processes spawned by the Exim
+daemon for handling incoming SMTP connections. The name is deliberately long,
+in order to emphasize what the contents are. When the daemon accepts a new
+connection, it increments this variable. A copy of the variable is passed to
+the child process that handles the connection, but its value is fixed, and
+never changes. It is only an approximation of how many incoming connections
+there actually are, because many other connections may come and go while a
+single connection is being processed. When a child process terminates, the
+daemon decrements its copy of the variable.
+

 .vitem "&$sn0$& &-- &$sn9$&"
 These variables are copies of the values of the &$n0$& &-- &$n9$& accumulators
 that were current at the end of the system filter file. This allows a system
 .vitem "&$sn0$& &-- &$sn9$&"
 These variables are copies of the values of the &$n0$& &-- &$n9$& accumulators
 that were current at the end of the system filter file. This allows a system


@@ -11272,18 +11572,18 @@ is compiled with the content-scanning extension. For details, see section
 
 
 .vitem &$spool_directory$&
 
 
 .vitem &$spool_directory$&

-.cindex "&$spool_directory$&"
+.vindex "&$spool_directory$&"

 The name of Exim's spool directory.
 
 .vitem &$spool_inodes$&
 The name of Exim's spool directory.
 
 .vitem &$spool_inodes$&

-.cindex "&$spool_inodes$&"
+.vindex "&$spool_inodes$&"

 The number of free inodes in the disk partition where Exim's spool files are
 being written. The value is recalculated whenever the variable is referenced.
 If the relevant file system does not have the concept of inodes, the value of
 is -1. See also the &%check_spool_inodes%& option.
 
 .vitem &$spool_space$&
 The number of free inodes in the disk partition where Exim's spool files are
 being written. The value is recalculated whenever the variable is referenced.
 If the relevant file system does not have the concept of inodes, the value of
 is -1. See also the &%check_spool_inodes%& option.
 
 .vitem &$spool_space$&

-.cindex "&$spool_space$&"
+.vindex "&$spool_space$&"

 The amount of free space (as a number of kilobytes) in the disk partition where
 Exim's spool files are being written. The value is recalculated whenever the
 variable is referenced. If the operating system does not have the ability to
 The amount of free space (as a number of kilobytes) in the disk partition where
 Exim's spool files are being written. The value is recalculated whenever the
 variable is referenced. If the operating system does not have the ability to


@@ -11297,85 +11597,96 @@ See also the &%check_spool_space%& option.
 
 
 .vitem &$thisaddress$&
 
 
 .vitem &$thisaddress$&

-.cindex "&$thisaddress$&"
+.vindex "&$thisaddress$&"

 This variable is set only during the processing of the &%foranyaddress%&
 command in a filter file. Its use is explained in the description of that
 command, which can be found in the separate document entitled &'Exim's
 interfaces to mail filtering'&.
 
 .vitem &$tls_certificate_verified$&
 This variable is set only during the processing of the &%foranyaddress%&
 command in a filter file. Its use is explained in the description of that
 command, which can be found in the separate document entitled &'Exim's
 interfaces to mail filtering'&.
 
 .vitem &$tls_certificate_verified$&

-.cindex "&$tls_certificate_verified$&"
+.vindex "&$tls_certificate_verified$&"

 This variable is set to &"1"& if a TLS certificate was verified when the
 message was received, and &"0"& otherwise.
 
 .vitem &$tls_cipher$&
 This variable is set to &"1"& if a TLS certificate was verified when the
 message was received, and &"0"& otherwise.
 
 .vitem &$tls_cipher$&

-.cindex "&$tls_cipher$&"
+.vindex "&$tls_cipher$&"

 When a message is received from a remote host over an encrypted SMTP
 connection, this variable is set to the cipher suite that was negotiated, for
 example DES-CBC3-SHA. In other circumstances, in particular, for message
 When a message is received from a remote host over an encrypted SMTP
 connection, this variable is set to the cipher suite that was negotiated, for
 example DES-CBC3-SHA. In other circumstances, in particular, for message

-received over unencrypted connections, the variable is empty. See chapter
-&<<CHAPTLS>>& for details of TLS support.
+received over unencrypted connections, the variable is empty. Testing
+&$tls_cipher$& for emptiness is one way of distinguishing between encrypted and
+non-encrypted connections during ACL processing.
+
+The &$tls_cipher$& variable retains its value during message delivery, except
+when an outward SMTP delivery takes place via the &(smtp)& transport. In this
+case, &$tls_cipher$& is cleared before any outgoing SMTP connection is made,
+and then set to the outgoing cipher suite if one is negotiated. See chapter
+&<<CHAPTLS>>& for details of TLS support and chapter &<<CHAPsmtptrans>>& for
+details of the &(smtp)& transport.

 
 .vitem &$tls_peerdn$&
 
 .vitem &$tls_peerdn$&

-.cindex "&$tls_peerdn$&"
+.vindex "&$tls_peerdn$&"

 When a message is received from a remote host over an encrypted SMTP
 connection, and Exim is configured to request a certificate from the client,
 the value of the Distinguished Name of the certificate is made available in the
 When a message is received from a remote host over an encrypted SMTP
 connection, and Exim is configured to request a certificate from the client,
 the value of the Distinguished Name of the certificate is made available in the

-&$tls_peerdn$& during subsequent processing.
+&$tls_peerdn$& during subsequent processing. &new("Like &$tls_cipher$&, the
+value is retained during message delivery, except during outbound SMTP
+deliveries.")

 
 .vitem &$tod_bsdinbox$&
 
 .vitem &$tod_bsdinbox$&

-.cindex "&$tod_bsdinbox$&"
+.vindex "&$tod_bsdinbox$&"

 The time of day and the date, in the format required for BSD-style mailbox
 files, for example: Thu Oct 17 17:14:09 1995.
 
 .vitem &$tod_epoch$&
 The time of day and the date, in the format required for BSD-style mailbox
 files, for example: Thu Oct 17 17:14:09 1995.
 
 .vitem &$tod_epoch$&

-.cindex "&$tod_epoch$&"
+.vindex "&$tod_epoch$&"

 The time and date as a number of seconds since the start of the Unix epoch.
 
 .vitem &$tod_full$&
 The time and date as a number of seconds since the start of the Unix epoch.
 
 .vitem &$tod_full$&

-.cindex "&$tod_full$&"
+.vindex "&$tod_full$&"

 A full version of the time and date, for example: Wed, 16 Oct 1995 09:51:40
 +0100. The timezone is always given as a numerical offset from UTC, with
 positive values used for timezones that are ahead (east) of UTC, and negative
 values for those that are behind (west).
 
 .vitem &$tod_log$&
 A full version of the time and date, for example: Wed, 16 Oct 1995 09:51:40
 +0100. The timezone is always given as a numerical offset from UTC, with
 positive values used for timezones that are ahead (east) of UTC, and negative
 values for those that are behind (west).
 
 .vitem &$tod_log$&

-.cindex "&$tod_log$&"
+.vindex "&$tod_log$&"

 The time and date in the format used for writing Exim's log files, for example:
 1995-10-12 15:32:29, but without a timezone.
 
 .vitem &$tod_logfile$&
 The time and date in the format used for writing Exim's log files, for example:
 1995-10-12 15:32:29, but without a timezone.
 
 .vitem &$tod_logfile$&

-.cindex "&$tod_logfile$&"
+.vindex "&$tod_logfile$&"

 This variable contains the date in the format yyyymmdd. This is the format that
 is used for datestamping log files when &%log_file_path%& contains the &`%D`&
 flag.
 
 .vitem &$tod_zone$&
 This variable contains the date in the format yyyymmdd. This is the format that
 is used for datestamping log files when &%log_file_path%& contains the &`%D`&
 flag.
 
 .vitem &$tod_zone$&

-.cindex "&$tod_zone$&"
+.vindex "&$tod_zone$&"

 This variable contains the numerical value of the local timezone, for example:
 -0500.
 
 .vitem &$tod_zulu$&
 This variable contains the numerical value of the local timezone, for example:
 -0500.
 
 .vitem &$tod_zulu$&

-.cindex "&$tod_zulu$&"
+.vindex "&$tod_zulu$&"

 This variable contains the UTC date and time in &"Zulu"& format, as specified
 by ISO 8601, for example: 20030221154023Z.
 
 .vitem &$value$&
 This variable contains the UTC date and time in &"Zulu"& format, as specified
 by ISO 8601, for example: 20030221154023Z.
 
 .vitem &$value$&

-.cindex "&$value$&"
+.vindex "&$value$&"

 This variable contains the result of an expansion lookup, extraction operation,
 This variable contains the result of an expansion lookup, extraction operation,

-or external command, as described above.
+or external command, as described above. It is also used during a
+&*reduce*& expansion.

 
 .vitem &$version_number$&
 
 .vitem &$version_number$&

-.cindex "&$version_number$&"
+.vindex "&$version_number$&"

 The version number of Exim.
 
 .vitem &$warn_message_delay$&
 The version number of Exim.
 
 .vitem &$warn_message_delay$&

-.cindex "&$warn_message_delay$&"
+.vindex "&$warn_message_delay$&"

 This variable is set only during the creation of a message warning about a
 delivery delay. Details of its use are explained in section &<<SECTcustwarn>>&.
 
 .vitem &$warn_message_recipients$&
 This variable is set only during the creation of a message warning about a
 delivery delay. Details of its use are explained in section &<<SECTcustwarn>>&.
 
 .vitem &$warn_message_recipients$&

-.cindex "&$warn_message_recipients$&"
+.vindex "&$warn_message_recipients$&"

 This variable is set only during the creation of a message warning about a
 delivery delay. Details of its use are explained in section &<<SECTcustwarn>>&.
 .endlist
 This variable is set only during the creation of a message warning about a
 delivery delay. Details of its use are explained in section &<<SECTcustwarn>>&.
 .endlist


@@ -11399,8 +11710,8 @@ EXIM_PERL = perl.o
 in your &_Local/Makefile_& and then build Exim in the normal way.
 
 
 in your &_Local/Makefile_& and then build Exim in the normal way.
 
 

-.section "Setting up so Perl can be used"
-.cindex "&%perl_startup%&"
+.section "Setting up so Perl can be used" "SECID85"
+.oindex "&%perl_startup%&"

 Access to Perl subroutines is via a global configuration option called
 &%perl_startup%& and an expansion string operator &%${perl ...}%&. If there is
 no &%perl_startup%& option in the Exim configuration file then no Perl
 Access to Perl subroutines is via a global configuration option called
 &%perl_startup%& and an expansion string operator &%${perl ...}%&. If there is
 no &%perl_startup%& option in the Exim configuration file then no Perl


@@ -11426,7 +11737,7 @@ the interpreter is started only when it is needed, but this can be changed in
 two ways:
 
 .ilist
 two ways:
 
 .ilist

-.cindex "&%perl_at_start%&"
+.oindex "&%perl_at_start%&"

 Setting &%perl_at_start%& (a boolean option) in the configuration requests
 a startup when Exim is entered.
 .next
 Setting &%perl_at_start%& (a boolean option) in the configuration requests
 a startup when Exim is entered.
 .next


@@ -11438,7 +11749,7 @@ There is also a command line option &%-pd%& (for delay) which suppresses the
 initial startup, even if &%perl_at_start%& is set.
 
 
 initial startup, even if &%perl_at_start%& is set.
 
 

-.section "Calling Perl subroutines"
+.section "Calling Perl subroutines" "SECID86"

 When the configuration file includes a &%perl_startup%& option you can make use
 of the string expansion item to call the Perl subroutines that are defined
 by the &%perl_startup%& code. The operator is used in any of the following
 When the configuration file includes a &%perl_startup%& option you can make use
 of the string expansion item to call the Perl subroutines that are defined
 by the &%perl_startup%& code. The operator is used in any of the following


@@ -11462,7 +11773,7 @@ by obeying Perl's &%die%& function, the expansion fails with the error message
 that was passed to &%die%&.
 
 
 that was passed to &%die%&.
 
 

-.section "Calling Exim functions from Perl"
+.section "Calling Exim functions from Perl" "SECID87"

 Within any Perl code called from Exim, the function &'Exim::expand_string()'&
 is available to call back into Exim's string expansion function. For example,
 the Perl code
 Within any Perl code called from Exim, the function &'Exim::expand_string()'&
 is available to call back into Exim's string expansion function. For example,
 the Perl code


@@ -11487,7 +11798,7 @@ debugging is enabled. If you want a newline at the end, you must supply it.
 timestamp. In this case, you should not supply a terminating newline.
 
 
 timestamp. In this case, you should not supply a terminating newline.
 
 

-.section "Use of standard output and error by Perl"
+.section "Use of standard output and error by Perl" "SECID88"

 .cindex "Perl" "standard output and error"
 You should not write to the standard error or output streams from within your
 Perl code, as it is not defined how these are set up. In versions of Exim
 .cindex "Perl" "standard output and error"
 You should not write to the standard error or output streams from within your
 Perl code, as it is not defined how these are set up. In versions of Exim


@@ -11565,14 +11876,12 @@ interfaces, or on different ports, and for this reason there are a number of
 options that can be used to influence Exim's behaviour. The rest of this
 chapter describes how they operate.
 
 options that can be used to influence Exim's behaviour. The rest of this
 chapter describes how they operate.
 

-.new

 When a message is received over TCP/IP, the interface and port that were
 actually used are set in &$received_ip_address$& and &$received_port$&.
 When a message is received over TCP/IP, the interface and port that were
 actually used are set in &$received_ip_address$& and &$received_port$&.

-.wen

 
 
 
 
 
 

-.section "Starting a listening daemon"
+.section "Starting a listening daemon" "SECID89"

 When a listening daemon is started (by means of the &%-bd%& command line
 option), the interfaces and ports on which it listens are controlled by the
 following options:
 When a listening daemon is started (by means of the &%-bd%& command line
 option), the interfaces and ports on which it listens are controlled by the
 following options:


@@ -11627,7 +11936,7 @@ IP addresses in &%local_interfaces%&, only numbers (not names) can be used.
 
 
 
 
 
 

-.section "Special IP listening addresses"
+.section "Special IP listening addresses" "SECID90"

 The addresses 0.0.0.0 and ::0 are treated specially. They are interpreted
 as &"all IPv4 interfaces"& and &"all IPv6 interfaces"&, respectively. In each
 case, Exim tells the TCP/IP stack to &"listen on all IPv&'x'& interfaces"&
 The addresses 0.0.0.0 and ::0 are treated specially. They are interpreted
 as &"all IPv4 interfaces"& and &"all IPv6 interfaces"&, respectively. In each
 case, Exim tells the TCP/IP stack to &"listen on all IPv&'x'& interfaces"&


@@ -11644,7 +11953,7 @@ Thus, by default, Exim listens on all available interfaces, on the SMTP port.
 
 
 
 
 
 

-.section "Overriding local_interfaces and daemon_smtp_ports"
+.section "Overriding local_interfaces and daemon_smtp_ports" "SECID91"

 The &%-oX%& command line option can be used to override the values of
 &%daemon_smtp_ports%& and/or &%local_interfaces%& for a particular daemon
 instance. Another way of doing this would be to use macros and the &%-D%&
 The &%-oX%& command line option can be used to override the values of
 &%daemon_smtp_ports%& and/or &%local_interfaces%& for a particular daemon
 instance. Another way of doing this would be to use macros and the &%-D%&


@@ -11698,7 +12007,7 @@ connections via the daemon.)
 
 
 
 
 
 

-.section "IPv6 address scopes"
+.section "IPv6 address scopes" "SECID92"

 .cindex "IPv6" "address scopes"
 IPv6 addresses have &"scopes"&, and a host with multiple hardware interfaces
 can, in principle, have the same link-local IPv6 address on different
 .cindex "IPv6" "address scopes"
 IPv6 addresses have &"scopes"&, and a host with multiple hardware interfaces
 can, in principle, have the same link-local IPv6 address on different


@@ -11724,7 +12033,7 @@ instead of &[getaddrinfo()]&. (Before version 4.14, it always used this
 function.) Of course, this means that the additional functionality of
 &[getaddrinfo()]& &-- recognizing scoped addresses &-- is lost.
 
 function.) Of course, this means that the additional functionality of
 &[getaddrinfo()]& &-- recognizing scoped addresses &-- is lost.
 

-.section "Disabling IPv6"
+.section "Disabling IPv6" "SECID93"

 .cindex "IPv6" "disabling"
 Sometimes it happens that an Exim binary that was compiled with IPv6 support is
 run on a host whose kernel does not support IPv6. The binary will fall back to
 .cindex "IPv6" "disabling"
 Sometimes it happens that an Exim binary that was compiled with IPv6 support is
 run on a host whose kernel does not support IPv6. The binary will fall back to


@@ -11745,7 +12054,7 @@ IPv6 addresses in an individual router.
 
 
 
 
 
 

-.section "Examples of starting a listening daemon"
+.section "Examples of starting a listening daemon" "SECID94"

 The default case in an IPv6 environment is
 .code
 daemon_smtp_ports = smtp
 The default case in an IPv6 environment is
 .code
 daemon_smtp_ports = smtp


@@ -11778,7 +12087,7 @@ local_interfaces = 192.168.34.67 : 192.168.34.67
 
 
 
 
 
 

-.section "Recognising the local host" "SECTreclocipadd"
+.section "Recognizing the local host" "SECTreclocipadd"

 The &%local_interfaces%& option is also used when Exim needs to determine
 whether or not an IP address refers to the local host. That is, the IP
 addresses of all the interfaces on which a daemon is listening are always
 The &%local_interfaces%& option is also used when Exim needs to determine
 whether or not an IP address refers to the local host. That is, the IP
 addresses of all the interfaces on which a daemon is listening are always


@@ -11818,7 +12127,7 @@ addresses match &%local_interfaces%& or &%extra_local_interfaces%&.
 
 
 
 
 
 

-.section "Delivering to a remote host"
+.section "Delivering to a remote host" "SECID95"

 Delivery to a remote host is handled by the smtp transport. By default, it
 allows the system's TCP/IP functions to choose which interface to use (if
 there is more than one) when connecting to a remote host. However, the
 Delivery to a remote host is handled by the smtp transport. By default, it
 allows the system's TCP/IP functions to choose which interface to use (if
 there is more than one) when connecting to a remote host. However, the


@@ -11859,12 +12168,13 @@ are now so many options, they are first listed briefly in functional groups, as
 an aid to finding the name of the option you are looking for. Some options are
 listed in more than one group.
 
 an aid to finding the name of the option you are looking for. Some options are
 listed in more than one group.
 

-.section "Miscellaneous"
+.section "Miscellaneous" "SECID96"

 .table2
 .row &%bi_command%&                  "to run for &%-bi%& command line option"
 .row &%disable_ipv6%&                "do no IPv6 processing"
 .row &%keep_malformed%&              "for broken files &-- should not happen"
 .row &%localhost_number%&            "for unique message ids in clusters"
 .table2
 .row &%bi_command%&                  "to run for &%-bi%& command line option"
 .row &%disable_ipv6%&                "do no IPv6 processing"
 .row &%keep_malformed%&              "for broken files &-- should not happen"
 .row &%localhost_number%&            "for unique message ids in clusters"

+.row &new(&%message_body_newlines%&) "retain newlines in &$message_body$&"

 .row &%message_body_visible%&        "how much to show in &$message_body$&"
 .row &%mua_wrapper%&                 "run in &""MUA wrapper""& mode"
 .row &%print_topbitchars%&           "top-bit characters are printing"
 .row &%message_body_visible%&        "how much to show in &$message_body$&"
 .row &%mua_wrapper%&                 "run in &""MUA wrapper""& mode"
 .row &%print_topbitchars%&           "top-bit characters are printing"


@@ -11872,7 +12182,7 @@ listed in more than one group.
 .endtable
 
 
 .endtable
 
 

-.section "Exim parameters"
+.section "Exim parameters" "SECID97"

 .table2
 .row &%exim_group%&                  "override compiled-in value"
 .row &%exim_path%&                   "override compiled-in value"
 .table2
 .row &%exim_group%&                  "override compiled-in value"
 .row &%exim_path%&                   "override compiled-in value"


@@ -11884,7 +12194,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Privilege controls"
+.section "Privilege controls" "SECID98"

 .table2
 .row &%admin_groups%&                "groups that are Exim admin users"
 .row &%deliver_drop_privilege%&      "drop root for delivery processes"
 .table2
 .row &%admin_groups%&                "groups that are Exim admin users"
 .row &%deliver_drop_privilege%&      "drop root for delivery processes"


@@ -11901,7 +12211,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Logging"
+.section "Logging" "SECID99"

 .table2
 .row &%hosts_connection_nolog%&      "exemption from connect logging"
 .row &%log_file_path%&               "override compiled-in value"
 .table2
 .row &%hosts_connection_nolog%&      "exemption from connect logging"
 .row &%log_file_path%&               "override compiled-in value"


@@ -11919,7 +12229,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Frozen messages"
+.section "Frozen messages" "SECID100"

 .table2
 .row &%auto_thaw%&                   "sets time for retrying frozen messages"
 .row &%freeze_tell%&                 "send message when freezing"
 .table2
 .row &%auto_thaw%&                   "sets time for retrying frozen messages"
 .row &%freeze_tell%&                 "send message when freezing"


@@ -11929,20 +12239,21 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Data lookups"
+.section "Data lookups" "SECID101"

 .table2
 .table2

+.row &new(&%ibase_servers%&)         "InterBase servers"

 .row &%ldap_default_servers%&        "used if no server in query"
 .row &%ldap_version%&                "set protocol version"
 .row &%lookup_open_max%&             "lookup files held open"
 .row &%ldap_default_servers%&        "used if no server in query"
 .row &%ldap_version%&                "set protocol version"
 .row &%lookup_open_max%&             "lookup files held open"

-.row &%mysql_servers%&               "as it says"
-.row &%oracle_servers%&              "as it says"
-.row &%pgsql_servers%&               "as it says"
+.row &new(&%mysql_servers%&)               "default MySQL servers"
+.row &new(&%oracle_servers%&)              "Oracle servers"
+.row &new(&%pgsql_servers%&)               "default PostgreSQL servers"

 .row &%sqlite_lock_timeout%&         "as it says"
 .endtable
 
 
 
 .row &%sqlite_lock_timeout%&         "as it says"
 .endtable
 
 
 

-.section "Message ids"
+.section "Message ids" "SECID102"

 .table2
 .row &%message_id_header_domain%&    "used to build &'Message-ID:'& header"
 .row &%message_id_header_text%&      "ditto"
 .table2
 .row &%message_id_header_domain%&    "used to build &'Message-ID:'& header"
 .row &%message_id_header_text%&      "ditto"


@@ -11950,7 +12261,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Embedded Perl Startup"
+.section "Embedded Perl Startup" "SECID103"

 .table2
 .row &%perl_at_start%&               "always start the interpreter"
 .row &%perl_startup%&                "code to obey when starting Perl"
 .table2
 .row &%perl_at_start%&               "always start the interpreter"
 .row &%perl_startup%&                "code to obey when starting Perl"


@@ -11958,7 +12269,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Daemon"
+.section "Daemon" "SECID104"

 .table2
 .row &%daemon_smtp_ports%&           "default ports"
 .row &%daemon_startup_retries%&      "number of times to retry"
 .table2
 .row &%daemon_smtp_ports%&           "default ports"
 .row &%daemon_startup_retries%&      "number of times to retry"


@@ -11971,7 +12282,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Resource control"
+.section "Resource control" "SECID105"

 .table2
 .row &%check_log_inodes%&            "before accepting a message"
 .row &%check_log_space%&             "before accepting a message"
 .table2
 .row &%check_log_inodes%&            "before accepting a message"
 .row &%check_log_space%&             "before accepting a message"


@@ -11979,6 +12290,7 @@ listed in more than one group.
 .row &%check_spool_space%&           "before accepting a message"
 .row &%deliver_queue_load_max%&      "no queue deliveries if load high"
 .row &%queue_only_load%&             "queue incoming if load high"
 .row &%check_spool_space%&           "before accepting a message"
 .row &%deliver_queue_load_max%&      "no queue deliveries if load high"
 .row &%queue_only_load%&             "queue incoming if load high"

+.row &new(&%queue_only_load_latch%&) "don't re-evaluate load for each message"

 .row &%queue_run_max%&               "maximum simultaneous queue runners"
 .row &%remote_max_parallel%&         "parallel SMTP delivery per message"
 .row &%smtp_accept_max%&             "simultaneous incoming connections"
 .row &%queue_run_max%&               "maximum simultaneous queue runners"
 .row &%remote_max_parallel%&         "parallel SMTP delivery per message"
 .row &%smtp_accept_max%&             "simultaneous incoming connections"


@@ -11998,7 +12310,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Policy controls"
+.section "Policy controls" "SECID106"

 .table2
 .row &%acl_not_smtp%&                "ACL for non-SMTP messages"
 .row &%acl_not_smtp_mime%&           "ACL for non-SMTP MIME parts"
 .table2
 .row &%acl_not_smtp%&                "ACL for non-SMTP messages"
 .row &%acl_not_smtp_mime%&           "ACL for non-SMTP MIME parts"


@@ -12042,7 +12354,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Callout cache"
+.section "Callout cache" "SECID107"

 .table2
 .row &%callout_domain_negative_expire%& "timeout for negative domain cache &&&
                                          item"
 .table2
 .row &%callout_domain_negative_expire%& "timeout for negative domain cache &&&
                                          item"


@@ -12055,8 +12367,11 @@ listed in more than one group.
 
 
 
 
 
 

-.section "TLS"
+.section "TLS" "SECID108"

 .table2
 .table2

+.row &%gnutls_require_kx%&           "control GnuTLS key exchanges"
+.row &%gnutls_require_mac%&          "control GnuTLS MAC algorithms"
+.row &%gnutls_require_protocols%&    "control GnuTLS protocols"

 .row &%tls_advertise_hosts%&         "advertise TLS to these hosts"
 .row &%tls_certificate%&             "location of server certificate"
 .row &%tls_crl%&                     "certificate revocation list"
 .row &%tls_advertise_hosts%&         "advertise TLS to these hosts"
 .row &%tls_certificate%&             "location of server certificate"
 .row &%tls_crl%&                     "certificate revocation list"


@@ -12064,7 +12379,7 @@ listed in more than one group.
 .row &%tls_on_connect_ports%&        "specify SSMTP (SMTPS) ports"
 .row &%tls_privatekey%&              "location of server private key"
 .row &%tls_remember_esmtp%&          "don't reset after starting TLS"
 .row &%tls_on_connect_ports%&        "specify SSMTP (SMTPS) ports"
 .row &%tls_privatekey%&              "location of server private key"
 .row &%tls_remember_esmtp%&          "don't reset after starting TLS"

-.row &%tls_require_ciphers%&         "specify acceptable cipers"
+.row &%tls_require_ciphers%&         "specify acceptable ciphers"

 .row &%tls_try_verify_hosts%&        "try to verify client certificate"
 .row &%tls_verify_certificates%&     "expected client certificates"
 .row &%tls_verify_hosts%&            "insist on client certificate verify"
 .row &%tls_try_verify_hosts%&        "try to verify client certificate"
 .row &%tls_verify_certificates%&     "expected client certificates"
 .row &%tls_verify_hosts%&            "insist on client certificate verify"


@@ -12072,7 +12387,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Local user handling"
+.section "Local user handling" "SECID109"

 .table2
 .row &%finduser_retries%&            "useful in NIS environments"
 .row &%gecos_name%&                  "used when creating &'Sender:'&"
 .table2
 .row &%finduser_retries%&            "useful in NIS environments"
 .row &%gecos_name%&                  "used when creating &'Sender:'&"


@@ -12086,7 +12401,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "All incoming messages (SMTP and non-SMTP)"
+.section "All incoming messages (SMTP and non-SMTP)" "SECID110"

 .table2
 .row &%header_maxsize%&              "total size of message header"
 .row &%header_line_maxsize%&         "individual header line limit"
 .table2
 .row &%header_maxsize%&              "total size of message header"
 .row &%header_line_maxsize%&         "individual header line limit"


@@ -12095,13 +12410,13 @@ listed in more than one group.
 .row &%received_header_text%&        "expanded to make &'Received:'&"
 .row &%received_headers_max%&        "for mail loop detection"
 .row &%recipients_max%&              "limit per message"
 .row &%received_header_text%&        "expanded to make &'Received:'&"
 .row &%received_headers_max%&        "for mail loop detection"
 .row &%recipients_max%&              "limit per message"

-.row &%recipients_max_reject%&       "permanently reject excess"
+.row &%recipients_max_reject%&       "permanently reject excess recipients"

 .endtable
 
 
 
 
 .endtable
 
 
 
 

-.section "Non-SMTP incoming messages"
+.section "Non-SMTP incoming messages" "SECID111"

 .table2
 .row &%receive_timeout%&             "for non-SMTP messages"
 .endtable
 .table2
 .row &%receive_timeout%&             "for non-SMTP messages"
 .endtable


@@ -12110,7 +12425,7 @@ listed in more than one group.
 
 
 
 
 
 

-.section "Incoming SMTP messages"
+.section "Incoming SMTP messages" "SECID112"

 See also the &'Policy controls'& section above.
 
 .table2
 See also the &'Policy controls'& section above.
 
 .table2


@@ -12149,7 +12464,7 @@ See also the &'Policy controls'& section above.
 
 
 
 
 
 

-.section "SMTP extensions"
+.section "SMTP extensions" "SECID113"

 .table2
 .row &%accept_8bitmime%&             "advertise 8BITMIME"
 .row &%auth_advertise_hosts%&        "advertise AUTH to these hosts"
 .table2
 .row &%accept_8bitmime%&             "advertise 8BITMIME"
 .row &%auth_advertise_hosts%&        "advertise AUTH to these hosts"


@@ -12161,7 +12476,7 @@ See also the &'Policy controls'& section above.
 
 
 
 
 
 

-.section "Processing messages"
+.section "Processing messages" "SECID114"

 .table2
 .row &%allow_domain_literals%&       "recognize domain literal syntax"
 .row &%allow_mx_to_ip%&              "allow MX to point to IP address"
 .table2
 .row &%allow_domain_literals%&       "recognize domain literal syntax"
 .row &%allow_mx_to_ip%&              "allow MX to point to IP address"


@@ -12182,7 +12497,7 @@ See also the &'Policy controls'& section above.
 
 
 
 
 
 

-.section "System filter"
+.section "System filter" "SECID115"

 .table2
 .row &%system_filter%&               "locate system filter"
 .row &%system_filter_directory_transport%& "transport for delivery to a &&&
 .table2
 .row &%system_filter%&               "locate system filter"
 .row &%system_filter_directory_transport%& "transport for delivery to a &&&


@@ -12196,7 +12511,7 @@ See also the &'Policy controls'& section above.
 
 
 
 
 
 

-.section "Routing and delivery"
+.section "Routing and delivery" "SECID116"

 .table2
 .row &%disable_ipv6%&                "do no IPv6 processing"
 .row &%dns_again_means_nonexist%&    "for broken domains"
 .table2
 .row &%disable_ipv6%&                "do no IPv6 processing"
 .row &%dns_again_means_nonexist%&    "for broken domains"


@@ -12210,6 +12525,7 @@ See also the &'Policy controls'& section above.
 .row &%queue_only%&                  "no immediate delivery at all"
 .row &%queue_only_file%&             "no immediate delivery if file exists"
 .row &%queue_only_load%&             "no immediate delivery if load is high"
 .row &%queue_only%&                  "no immediate delivery at all"
 .row &%queue_only_file%&             "no immediate delivery if file exists"
 .row &%queue_only_load%&             "no immediate delivery if load is high"

+.row &new(&%queue_only_load_latch%&) "don't re-evaluate load for each message"

 .row &%queue_only_override%&         "allow command line to override"
 .row &%queue_run_in_order%&          "order of arrival"
 .row &%queue_run_max%&               "of simultaneous queue runners"
 .row &%queue_only_override%&         "allow command line to override"
 .row &%queue_run_in_order%&          "order of arrival"
 .row &%queue_run_max%&               "of simultaneous queue runners"


@@ -12222,7 +12538,7 @@ See also the &'Policy controls'& section above.
 
 
 
 
 
 

-.section "Bounce and warning messages"
+.section "Bounce and warning messages" "SECID117"

 .table2
 .row &%bounce_message_file%&         "content of bounce"
 .row &%bounce_message_text%&         "content of bounce"
 .table2
 .row &%bounce_message_file%&         "content of bounce"
 .row &%bounce_message_text%&         "content of bounce"


@@ -12230,6 +12546,7 @@ See also the &'Policy controls'& section above.
 .row &%bounce_return_message%&       "include original message in bounce"
 .row &%bounce_return_size_limit%&    "limit on returned message"
 .row &%bounce_sender_authentication%& "send authenticated sender with bounce"
 .row &%bounce_return_message%&       "include original message in bounce"
 .row &%bounce_return_size_limit%&    "limit on returned message"
 .row &%bounce_sender_authentication%& "send authenticated sender with bounce"

+.row &%dsn_from%&                    "set &'From:'& contents in bounces"

 .row &%errors_copy%&                 "copy bounce messages"
 .row &%errors_reply_to%&             "&'Reply-to:'& in bounces"
 .row &%delay_warning%&               "time schedule"
 .row &%errors_copy%&                 "copy bounce messages"
 .row &%errors_reply_to%&             "&'Reply-to:'& in bounces"
 .row &%delay_warning%&               "time schedule"


@@ -12287,7 +12604,7 @@ See chapter &<<CHAPACL>>& for further details.
 .cindex "DATA" "ACL for"
 This option defines the ACL that is run after an SMTP DATA command has been
 processed and the message itself has been received, but before the final
 .cindex "DATA" "ACL for"
 This option defines the ACL that is run after an SMTP DATA command has been
 processed and the message itself has been received, but before the final

-acknowledgement is sent. See chapter &<<CHAPACL>>& for further details.
+acknowledgment is sent. See chapter &<<CHAPACL>>& for further details.

 
 .option acl_smtp_etrn main string&!! unset
 .cindex "ETRN" "ACL for"
 
 .option acl_smtp_etrn main string&!! unset
 .cindex "ETRN" "ACL for"


@@ -12329,7 +12646,7 @@ received, before the message itself is received. See chapter &<<CHAPACL>>& for
 further details.
 
 .option acl_smtp_quit main string&!! unset
 further details.
 
 .option acl_smtp_quit main string&!! unset

-.cindex "QUIT" "ACL for"
+.cindex "QUIT, ACL for"

 This option defines the ACL that is run when an SMTP QUIT command is
 received. See chapter &<<CHAPACL>>& for further details.
 
 This option defines the ACL that is run when an SMTP QUIT command is
 received. See chapter &<<CHAPACL>>& for further details.
 


@@ -12339,7 +12656,7 @@ This option defines the ACL that is run when an SMTP RCPT command is
 received. See chapter &<<CHAPACL>>& for further details.
 
 .option acl_smtp_starttls main string&!! unset
 received. See chapter &<<CHAPACL>>& for further details.
 
 .option acl_smtp_starttls main string&!! unset

-.cindex "STARTTLS" "ACL for"
+.cindex "STARTTLS, ACL for"

 This option defines the ACL that is run when an SMTP STARTTLS command is
 received. See chapter &<<CHAPACL>>& for further details.
 
 This option defines the ACL that is run when an SMTP STARTTLS command is
 received. See chapter &<<CHAPACL>>& for further details.
 


@@ -12435,7 +12752,7 @@ option is expanded, with a setting like this:
 .code
 auth_advertise_hosts = ${if eq{$tls_cipher}{}{}{*}}
 .endd
 .code
 auth_advertise_hosts = ${if eq{$tls_cipher}{}{}{*}}
 .endd

-.cindex "&$tls_cipher$&"
+.vindex "&$tls_cipher$&"

 If &$tls_cipher$& is empty, the session is not encrypted, and the result of
 the expansion is empty, thus matching no hosts. Otherwise, the result of the
 expansion is *, which matches all hosts.
 If &$tls_cipher$& is empty, the session is not encrypted, and the result of
 the expansion is empty, thus matching no hosts. Otherwise, the result of the
 expansion is *, which matches all hosts.


@@ -12466,7 +12783,7 @@ before use. See section &<<SECTscanvirus>>& for further details.
 
 
 .option bi_command main string unset
 
 
 .option bi_command main string unset

-.cindex "&%-bi%& option"
+.oindex "&%-bi%&"

 This option supplies the name of a command that is run when Exim is called with
 the &%-bi%& option (see chapter &<<CHAPcommandline>>&). The string value is
 just the command name, it is not a complete command line. If an argument is
 This option supplies the name of a command that is run when Exim is called with
 the &%-bi%& option (see chapter &<<CHAPcommandline>>&). The string value is
 just the command name, it is not a complete command line. If an argument is


@@ -12504,7 +12821,7 @@ bounce messages generated by Exim. See also &%bounce_return_size_limit%& and
 
 
 .option bounce_return_size_limit main integer 100K
 
 
 .option bounce_return_size_limit main integer 100K

-.cindex "size limit" "of bounce"
+.cindex "size" "of bounce, limit"

 .cindex "bounce message" "size limit"
 .cindex "limit" "bounce message size"
 This option sets a limit in bytes on the size of messages that are returned to
 .cindex "bounce message" "size limit"
 .cindex "limit" "bounce message size"
 This option sets a limit in bytes on the size of messages that are returned to


@@ -12581,7 +12898,7 @@ See &%check_spool_space%& below.
 
 .oindex "&%check_rfc2047_length%&"
 .cindex "RFC 2047" "disabling length check"
 
 .oindex "&%check_rfc2047_length%&"
 .cindex "RFC 2047" "disabling length check"

-.option check_rfc2047_length " User: main" boolean true
+.option check_rfc2047_length main boolean true

 RFC 2047 defines a way of encoding non-ASCII characters in headers using a
 system of &"encoded words"&. The RFC specifies a maximum length for an encoded
 word; strings to be encoded that exceed this length are supposed to use
 RFC 2047 defines a way of encoding non-ASCII characters in headers using a
 system of &"encoded words"&. The RFC specifies a maximum length for an encoded
 word; strings to be encoded that exceed this length are supposed to use


@@ -12597,15 +12914,15 @@ See &%check_spool_space%& below.
 
 .option check_spool_space main integer 0
 .cindex "checking disk space"
 
 .option check_spool_space main integer 0
 .cindex "checking disk space"

-.cindex "disk space" "checking"
+.cindex "disk space, checking"

 .cindex "spool directory" "checking space"
 The four &%check_...%& options allow for checking of disk resources before a
 message is accepted.
 
 .cindex "spool directory" "checking space"
 The four &%check_...%& options allow for checking of disk resources before a
 message is accepted.
 

-.cindex "&$log_inodes$&"
-.cindex "&$log_space$&"
-.cindex "&$spool_inodes$&"
-.cindex "&$spool_space$&"
+.vindex "&$log_inodes$&"
+.vindex "&$log_space$&"
+.vindex "&$spool_inodes$&"
+.vindex "&$spool_space$&"

 When any of these options are set, they apply to all incoming messages. If you
 want to apply different checks to different kinds of message, you can do so by
 testing the variables &$log_inodes$&, &$log_space$&, &$spool_inodes$&, and
 When any of these options are set, they apply to all incoming messages. If you
 want to apply different checks to different kinds of message, you can do so by
 testing the variables &$log_inodes$&, &$log_space$&, &$spool_inodes$&, and


@@ -12648,7 +12965,7 @@ listens. See chapter &<<CHAPinterfaces>>& for details of how it is used. For
 backward compatibility, &%daemon_smtp_port%& (singular) is a synonym.
 
 .option daemon_startup_retries main integer 9
 backward compatibility, &%daemon_smtp_port%& (singular) is a synonym.
 
 .option daemon_startup_retries main integer 9

-.cindex "daemon startup" "retrying"
+.cindex "daemon startup, retrying"

 This option, along with &%daemon_startup_sleep%&, controls the retrying done by
 the daemon at startup when it cannot immediately bind a listening socket
 (typically because the socket is already in use): &%daemon_startup_retries%&
 This option, along with &%daemon_startup_sleep%&, controls the retrying done by
 the daemon at startup when it cannot immediately bind a listening socket
 (typically because the socket is already in use): &%daemon_startup_retries%&


@@ -12660,7 +12977,7 @@ See &%daemon_startup_retries%&.
 
 .option delay_warning main "time list" 24h
 .cindex "warning of delay"
 
 .option delay_warning main "time list" 24h
 .cindex "warning of delay"

-.cindex "delay warning" "specifying"
+.cindex "delay warning, specifying"

 When a message is delayed, Exim sends a warning message to the sender at
 intervals specified by this option. The data is a colon-separated list of times
 after which to send warning messages. If the value of the option is an empty
 When a message is delayed, Exim sends a warning message to the sender at
 intervals specified by this option. The data is a colon-separated list of times
 after which to send warning messages. If the value of the option is an empty


@@ -12685,7 +13002,7 @@ delay_warning = 2h:12h:99d
 .endd
 
 .option delay_warning_condition main string&!! "see below"
 .endd
 
 .option delay_warning_condition main string&!! "see below"

-.cindex "&$domain$&"
+.vindex "&$domain$&"

 The string is expanded at the time a warning message might be sent. If all the
 deferred addresses have the same domain, it is set in &$domain$& during the
 expansion. Otherwise &$domain$& is empty. If the result of the expansion is a
 The string is expanded at the time a warning message might be sent. If all the
 deferred addresses have the same domain, it is set in &$domain$& during the
 expansion. Otherwise &$domain$& is empty. If the result of the expansion is a


@@ -12731,6 +13048,20 @@ should not be present in incoming messages, and this option causes them to be
 removed at the time the message is received, to avoid any problems that might
 occur when a delivered message is subsequently sent on to some other recipient.
 
 removed at the time the message is received, to avoid any problems that might
 occur when a delivered message is subsequently sent on to some other recipient.
 

+.option disable_fsync main boolean false
+.cindex "&[fsync()]&, disabling"
+This option is available only if Exim was built with the compile-time option
+ENABLE_DISABLE_FSYNC. When this is not set, a reference to &%disable_fsync%& in
+a runtime configuration generates an &"unknown option"& error. You should not
+build Exim with ENABLE_DISABLE_FSYNC or set &%disable_fsync%& unless you
+really, really, really understand what you are doing. &'No pre-compiled
+distributions of Exim should ever make this option available.'&
+
+When &%disable_fsync%& is set true, Exim no longer calls &[fsync()]& to force
+updated files' data to be written to disc before continuing. Unexpected events
+such as crashes and power outages may cause data to be lost or scrambled.
+Here be Dragons. &*Beware.*&
+

 
 .option disable_ipv6 main boolean false
 .cindex "IPv6" "disabling"
 
 .option disable_ipv6 main boolean false
 .cindex "IPv6" "disabling"


@@ -12775,7 +13106,7 @@ dns_check_names_pattern = \
   (?i)^(?>(?(1)\.|())[^\W_](?>[a-z0-9/-]*[^\W_])?)+$
 .endd
 which permits only letters, digits, slashes, and hyphens in components, but
   (?i)^(?>(?(1)\.|())[^\W_](?>[a-z0-9/-]*[^\W_])?)+$
 .endd
 which permits only letters, digits, slashes, and hyphens in components, but

-they must start and end with a letter or digit. Hyphens are not, in fact,
+they must start and end with a letter or digit. &new(Slashes) are not, in fact,

 permitted in host names, but they are found in certain NS records (which can be
 accessed in Exim by using a &%dnsdb%& lookup). If you set
 &%allow_utf8_domains%&, you must modify this pattern, or set the option to an
 permitted in host names, but they are found in certain NS records (which can be
 accessed in Exim by using a &%dnsdb%& lookup). If you set
 &%allow_utf8_domains%&, you must modify this pattern, or set the option to an


@@ -12825,6 +13156,17 @@ This is an obsolete option that is now a no-op. It used to affect the way Exim
 handled CR and LF characters in incoming messages. What happens now is
 described in section &<<SECTlineendings>>&.
 
 handled CR and LF characters in incoming messages. What happens now is
 described in section &<<SECTlineendings>>&.
 

+.option dsn_from main "string&!!" "see below"
+.cindex "&'From:'& header line" "in bounces"
+.cindex "bounce messages" "&'From:'& line, specifying"
+This option can be used to vary the contents of &'From:'& header lines in
+bounces and other automatically generated messages (&"Delivery Status
+Notifications"& &-- hence the name of the option). The default setting is:
+.code
+dsn_from = Mail Delivery System <Mailer-Daemon@$qualify_domain>
+.endd
+The value is expanded every time it is needed. If the expansion fails, a
+panic is logged, and the default value is used.

 
 .option envelope_to_remove main boolean true
 .cindex "&'Envelope-to:'& header line"
 
 .option envelope_to_remove main boolean true
 .cindex "&'Envelope-to:'& header line"


@@ -12857,8 +13199,8 @@ errors_copy = spqr@mydomain   postmaster@mydomain.example :\
               rqps@mydomain   hostmaster@mydomain.example,\
                               postmaster@mydomain.example
 .endd
               rqps@mydomain   hostmaster@mydomain.example,\
                               postmaster@mydomain.example
 .endd

-.cindex "&$domain$&"
-.cindex "&$local_part$&"
+.vindex "&$domain$&"
+.vindex "&$local_part$&"

 The address list is expanded before use. The expansion variables &$local_part$&
 and &$domain$& are set from the original recipient of the error message, and if
 there was any wildcard matching in the pattern, the expansion
 The address list is expanded before use. The expansion variables &$local_part$&
 and &$domain$& are set from the original recipient of the error message, and if
 there was any wildcard matching in the pattern, the expansion


@@ -12903,7 +13245,7 @@ security issues.
 
 
 .option exim_path main string "see below"
 
 
 .option exim_path main string "see below"

-.cindex "Exim binary" "path name"
+.cindex "Exim binary, path name"

 This option specifies the path name of the Exim binary, which is used when Exim
 needs to re-exec itself. The default is set up to point to the file &'exim'& in
 the directory configured at compile time by the BIN_DIRECTORY setting. It
 This option specifies the path name of the Exim binary, which is used when Exim
 needs to re-exec itself. The default is set up to point to the file &'exim'& in
 the directory configured at compile time by the BIN_DIRECTORY setting. It


@@ -12935,8 +13277,12 @@ routing, but which are not used for listening by the daemon. See section
 &<<SECTreclocipadd>>& for details.
 
 
 &<<SECTreclocipadd>>& for details.
 
 

-.option "extract_addresses_remove_ &~arguments" main boolean true
-.cindex "&%-t%& option"
+. Allow this long option name to split; give it unsplit as a fifth argument
+. for the automatic .oindex that is generated by .option.
+
+.option "extract_addresses_remove_ &~&~arguments" main boolean true &&&
+         extract_addresses_remove_arguments
+.oindex "&%-t%&"

 .cindex "command line" "addresses with &%-t%&"
 .cindex "Sendmail compatibility" "&%-t%& option"
 According to some Sendmail documentation (Sun, IRIX, HP-UX), if any addresses
 .cindex "command line" "addresses with &%-t%&"
 .cindex "Sendmail compatibility" "&%-t%& option"
 According to some Sendmail documentation (Sun, IRIX, HP-UX), if any addresses


@@ -12951,7 +13297,7 @@ addresses.
 
 
 .option finduser_retries main integer 0
 
 
 .option finduser_retries main integer 0

-.cindex "NIS" "looking up users; retrying"
+.cindex "NIS, retrying user lookups"

 On systems running NIS or other schemes in which user and group information is
 distributed from a remote system, there can be times when &[getpwnam()]& and
 related functions fail, even when given valid data, because things time out.
 On systems running NIS or other schemes in which user and group information is
 distributed from a remote system, there can be times when &[getpwnam()]& and
 related functions fail, even when given valid data, because things time out.


@@ -12986,7 +13332,7 @@ logging that you require.
 
 .option gecos_name main string&!! unset
 .cindex "HP-UX"
 
 .option gecos_name main string&!! unset
 .cindex "HP-UX"

-.cindex "&""gecos""& field" "parsing"
+.cindex "&""gecos""& field, parsing"

 Some operating systems, notably HP-UX, use the &"gecos"& field in the system
 password file to hold other information in addition to users' real names. Exim
 looks up this field for use when it is creating &'Sender:'& or &'From:'&
 Some operating systems, notably HP-UX, use the &"gecos"& field in the system
 password file to hold other information in addition to users' real names. Exim
 looks up this field for use when it is creating &'Sender:'& or &'From:'&


@@ -13013,6 +13359,19 @@ gecos_name = $1
 See &%gecos_name%& above.
 
 
 See &%gecos_name%& above.
 
 

+.option gnutls_require_kx main string unset
+This option controls the key exchange mechanisms when GnuTLS is used in an Exim
+server. For details, see section &<<SECTreqciphgnu>>&.
+
+.option gnutls_require_mac main string unset
+This option controls the MAC algorithms when GnuTLS is used in an Exim
+server. For details, see section &<<SECTreqciphgnu>>&.
+
+.option gnutls_require_protocols main string unset
+This option controls the protocols when GnuTLS is used in an Exim
+server. For details, see section &<<SECTreqciphgnu>>&.
+
+

 .option headers_charset main string "see below"
 This option sets a default character set for translating from encoded MIME
 &"words"& in header lines, when referenced by an &$h_xxx$& expansion item. The
 .option headers_charset main string "see below"
 This option sets a default character set for translating from encoded MIME
 &"words"& in header lines, when referenced by an &$h_xxx$& expansion item. The


@@ -13079,7 +13438,7 @@ do.
 
 .option helo_try_verify_hosts main "host list&!!" unset
 .cindex "HELO verifying" "optional"
 
 .option helo_try_verify_hosts main "host list&!!" unset
 .cindex "HELO verifying" "optional"

-.cindex "EHLO verifying" "optional"
+.cindex "EHLO" "verifying, optional"

 By default, Exim just checks the syntax of HELO and EHLO commands (see
 &%helo_accept_junk_hosts%& and &%helo_allow_chars%&). However, some sites like
 to do more extensive checking of the data supplied by these commands. The ACL
 By default, Exim just checks the syntax of HELO and EHLO commands (see
 &%helo_accept_junk_hosts%& and &%helo_allow_chars%&). However, some sites like
 to do more extensive checking of the data supplied by these commands. The ACL


@@ -13112,7 +13471,7 @@ be detected later in an ACL by the &`verify`& &`=`& &`helo`& condition.
 
 .option helo_verify_hosts main "host list&!!" unset
 .cindex "HELO verifying" "mandatory"
 
 .option helo_verify_hosts main "host list&!!" unset
 .cindex "HELO verifying" "mandatory"

-.cindex "EHLO verifying" "mandatory"
+.cindex "EHLO" "verifying, mandatory"

 Like &%helo_try_verify_hosts%&, this option is obsolete, and retained only for
 backwards compatibility. For hosts that match this option, Exim checks the host
 name given in the HELO or EHLO in the same way as for
 Like &%helo_try_verify_hosts%&, this option is obsolete, and retained only for
 backwards compatibility. For hosts that match this option, Exim checks the host
 name given in the HELO or EHLO in the same way as for


@@ -13144,7 +13503,7 @@ retry times, insert a dummy retry rule with a long retry time.
 
 
 .option host_lookup main "host list&!!" unset
 
 
 .option host_lookup main "host list&!!" unset

-.cindex "host name lookup" "forcing"
+.cindex "host name" "lookup, forcing"

 Exim does not look up the name of a calling host from its IP address unless it
 is required to compare against some host list, or the host matches
 &%helo_try_verify_hosts%& or &%helo_verify_hosts%&, or the host matches this
 Exim does not look up the name of a calling host from its IP address unless it
 is required to compare against some host list, or the host matches
 &%helo_try_verify_hosts%& or &%helo_verify_hosts%&, or the host matches this


@@ -13160,8 +13519,8 @@ After a successful reverse lookup, Exim does a forward lookup on the name it
 has obtained, to verify that it yields the IP address that it started with. If
 this check fails, Exim behaves as if the name lookup failed.
 
 has obtained, to verify that it yields the IP address that it started with. If
 this check fails, Exim behaves as if the name lookup failed.
 

-.cindex "&$host_lookup_failed$&"
-.cindex "&$sender_host_name$&"
+.vindex "&$host_lookup_failed$&"
+.vindex "&$sender_host_name$&"

 After any kind of failure, the host name (in &$sender_host_name$&) remains
 unset, and &$host_lookup_failed$& is set to the string &"1"&. See also
 &%dns_again_means_nonexist%&, &%helo_lookup_domains%&, and &`verify`& &`=`&
 After any kind of failure, the host name (in &$sender_host_name$&) remains
 unset, and &$host_lookup_failed$& is set to the string &"1"&. See also
 &%dns_again_means_nonexist%&, &%helo_lookup_domains%&, and &`verify`& &`=`&


@@ -13228,7 +13587,15 @@ section &<<SECTdomainlist>>&), and when checking the &%hosts%& option in the
 &(smtp)& transport for the local host (see the &%allow_localhost%& option in
 that transport). See also &%local_interfaces%&, &%extra_local_interfaces%&, and
 chapter &<<CHAPinterfaces>>&, which contains a discussion about local network
 &(smtp)& transport for the local host (see the &%allow_localhost%& option in
 that transport). See also &%local_interfaces%&, &%extra_local_interfaces%&, and
 chapter &<<CHAPinterfaces>>&, which contains a discussion about local network

-interfaces and recognising the local host.
+interfaces and recognizing the local host.
+
+
+.option ibase_servers main "string list" unset
+.cindex "InterBase" "server list"
+This option provides a list of InterBase servers and associated connection data,
+to be used in conjunction with &(ibase)& lookups (see section &<<SECID72>>&).
+The option is available only if Exim has been built with InterBase support.
+

 
 
 .option ignore_bounce_errors_after main time 10w
 
 
 .option ignore_bounce_errors_after main time 10w


@@ -13288,7 +13655,7 @@ with LDAP support.
 
 
 .option ldap_version main integer unset
 
 
 .option ldap_version main integer unset

-.cindex "LDAP protocol version" "forcing"
+.cindex "LDAP" "protocol version, forcing"

 This option can be used to force Exim to set a specific protocol version for
 LDAP. If it option is unset, it is shown by the &%-bP%& command line option as
 -1. When this is the case, the default is 3 if LDAP_VERSION3 is defined in
 This option can be used to force Exim to set a specific protocol version for
 LDAP. If it option is unset, it is shown by the &%-bP%& command line option as
 -1. When this is the case, the default is 3 if LDAP_VERSION3 is defined in


@@ -13396,7 +13763,7 @@ See also the ACL modifier &`control = suppress_local_fixups`&. Section
 .option localhost_number main string&!! unset
 .cindex "host" "locally unique number for"
 .cindex "message ids" "with multiple hosts"
 .option localhost_number main string&!! unset
 .cindex "host" "locally unique number for"
 .cindex "message ids" "with multiple hosts"

-.cindex "&$localhost_number$&"
+.vindex "&$localhost_number$&"

 Exim's message ids are normally unique only within the local host. If
 uniqueness among a set of hosts is required, each host must set a different
 value for the &%localhost_number%& option. The string is expanded immediately
 Exim's message ids are normally unique only within the local host. If
 uniqueness among a set of hosts is required, each host must set a different
 value for the &%localhost_number%& option. The string is expanded immediately


@@ -13441,8 +13808,8 @@ logging, in section &<<SECTlogselector>>&.
 
 .option log_timezone main boolean false
 .cindex "log" "timezone for entries"
 
 .option log_timezone main boolean false
 .cindex "log" "timezone for entries"

-.cindex "&$tod_log$&"
-.cindex "&$tod_zone$&"
+.vindex "&$tod_log$&"
+.vindex "&$tod_zone$&"

 By default, the timestamps on log lines are in local time without the
 timezone. This means that if your timezone changes twice a year, the timestamps
 in log lines are ambiguous for an hour when the clocks go back. One way of
 By default, the timestamps on log lines are in local time without the
 timezone. This means that if your timezone changes twice a year, the timestamps
 in log lines are ambiguous for an hour when the clocks go back. One way of


@@ -13456,7 +13823,7 @@ another variable called &$tod_zone$& that contains just the timezone offset.
 
 .option lookup_open_max main integer 25
 .cindex "too many open files"
 
 .option lookup_open_max main integer 25
 .cindex "too many open files"

-.cindex "open files" "too many"
+.cindex "open files, too many"

 .cindex "file" "too many open"
 .cindex "lookup" "maximum open files"
 .cindex "limit" "open files for lookups"
 .cindex "file" "too many open"
 .cindex "lookup" "maximum open files"
 .cindex "limit" "open files for lookups"


@@ -13472,7 +13839,7 @@ open files"& errors with NDBM, you need to reduce the value of
 
 
 .option max_username_length main integer 0
 
 
 .option max_username_length main integer 0

-.cindex "length" "of login name"
+.cindex "length of login name"

 .cindex "user name" "maximum length"
 .cindex "limit" "user name length"
 Some operating systems are broken in that they truncate long arguments to
 .cindex "user name" "maximum length"
 .cindex "limit" "user name length"
 Some operating systems are broken in that they truncate long arguments to


@@ -13481,12 +13848,21 @@ this option is set greater than zero, any attempt to call &[getpwnam()]& with
 an argument that is longer behaves as if &[getpwnam()]& failed.
 
 
 an argument that is longer behaves as if &[getpwnam()]& failed.
 
 

+.option message_body_newlines main bool false
+.cindex "message body" "newlines in variables"
+.cindex "newline" "in message body variables"
+.vindex "&$message_body$&"
+.vindex "&$message_body_end$&"
+By default, newlines in the message body are replaced by spaces when setting
+the &$message_body$& and &$message_body_end$& expansion variables. If this
+option is set true, this no longer happens.
+

 
 .option message_body_visible main integer 500
 .cindex "body of message" "visible size"
 .cindex "message body" "visible size"
 
 .option message_body_visible main integer 500
 .cindex "body of message" "visible size"
 .cindex "message body" "visible size"

-.cindex "&$message_body$&"
-.cindex "&$message_body_end$&"
+.vindex "&$message_body$&"
+.vindex "&$message_body_end$&"

 This option specifies how much of a message's body is to be included in the
 &$message_body$& and &$message_body_end$& expansion variables.
 
 This option specifies how much of a message's body is to be included in the
 &$message_body$& and &$message_body_end$& expansion variables.
 


@@ -13518,7 +13894,7 @@ colons will become hyphens.
 
 
 .option message_logs main boolean true
 
 
 .option message_logs main boolean true

-.cindex "message log" "disabling"
+.cindex "message logs" "disabling"

 .cindex "log" "message log; disabling"
 If this option is turned off, per-message log files are not created in the
 &_msglog_& spool sub-directory. This reduces the amount of disk I/O required by
 .cindex "log" "message log; disabling"
 If this option is turned off, per-message log files are not created in the
 &_msglog_& spool sub-directory. This reduces the amount of disk I/O required by


@@ -13531,12 +13907,12 @@ which is not affected by this option.
 .option message_size_limit main string&!! 50M
 .cindex "message" "size limit"
 .cindex "limit" "message size"
 .option message_size_limit main string&!! 50M
 .cindex "message" "size limit"
 .cindex "limit" "message size"

-.cindex "size of message" "limit"
+.cindex "size" "of message, limit"

 This option limits the maximum size of message that Exim will process. The
 value is expanded for each incoming connection so, for example, it can be made
 to depend on the IP address of the remote host for messages arriving via
 This option limits the maximum size of message that Exim will process. The
 value is expanded for each incoming connection so, for example, it can be made
 to depend on the IP address of the remote host for messages arriving via

-TCP/IP. &new("After expansion, the value must be a sequence of decimal digits,
-optionally followed by K or M.")
+TCP/IP. After expansion, the value must be a sequence of decimal digits,
+optionally followed by K or M.

 
 &*Note*&: This limit cannot be made to depend on a message's sender or any
 other properties of an individual message, because it has to be advertised in
 
 &*Note*&: This limit cannot be made to depend on a message's sender or any
 other properties of an individual message, because it has to be advertised in


@@ -13575,7 +13951,7 @@ contains a full description of this facility.
 .option mysql_servers main "string list" unset
 .cindex "MySQL" "server list"
 This option provides a list of MySQL servers and associated connection data, to
 .option mysql_servers main "string list" unset
 .cindex "MySQL" "server list"
 This option provides a list of MySQL servers and associated connection data, to

-be used in conjunction with &(mysql)& lookups (see section &<<SECTsql>>&). The
+be used in conjunction with &(mysql)& lookups (see section &<<SECID72>>&). The

 option is available only if Exim has been built with MySQL support.
 
 
 option is available only if Exim has been built with MySQL support.
 
 


@@ -13606,7 +13982,7 @@ transport driver.
 .option oracle_servers main "string list" unset
 .cindex "Oracle" "server list"
 This option provides a list of Oracle servers and associated connection data,
 .option oracle_servers main "string list" unset
 .cindex "Oracle" "server list"
 This option provides a list of Oracle servers and associated connection data,

-to be used in conjunction with &(oracle)& lookups (see section &<<SECTsql>>&).
+to be used in conjunction with &(oracle)& lookups (see section &<<SECID72>>&).

 The option is available only if Exim has been built with Oracle support.
 
 
 The option is available only if Exim has been built with Oracle support.
 
 


@@ -13645,13 +14021,13 @@ interpreter. See chapter &<<CHAPperl>>& for details of its use.
 .cindex "PostgreSQL lookup type" "server list"
 This option provides a list of PostgreSQL servers and associated connection
 data, to be used in conjunction with &(pgsql)& lookups (see section
 .cindex "PostgreSQL lookup type" "server list"
 This option provides a list of PostgreSQL servers and associated connection
 data, to be used in conjunction with &(pgsql)& lookups (see section

-&<<SECTsql>>&). The option is available only if Exim has been built with
+&<<SECID72>>&). The option is available only if Exim has been built with

 PostgreSQL support.
 
 
 .option pid_file_path main string&!! "set at compile time"
 .cindex "daemon" "pid file path"
 PostgreSQL support.
 
 
 .option pid_file_path main string&!! "set at compile time"
 .cindex "daemon" "pid file path"

-.cindex "pid file" "path for"
+.cindex "pid file, path for"

 This option sets the name of the file to which the Exim daemon writes its
 process id. The string is expanded, so it can contain, for example, references
 to the host name:
 This option sets the name of the file to which the Exim daemon writes its
 process id. The string is expanded, so it can contain, for example, references
 to the host name:


@@ -13666,14 +14042,14 @@ of the &%-oX%& option, unless a path is explicitly supplied by &%-oP%&.
 
 
 .option pipelining_advertise_hosts main "host list&!!" *
 
 
 .option pipelining_advertise_hosts main "host list&!!" *

-.cindex "PIPELINING advertising" "suppressing"
+.cindex "PIPELINING" "suppressing advertising"

 This option can be used to suppress the advertisement of the SMTP
 This option can be used to suppress the advertisement of the SMTP

-PIPELINING extension to specific hosts. When PIPELINING is not
-advertised and &%smtp_enforce_sync%& is true, an Exim server enforces strict
-synchronization for each SMTP command and response.
-When PIPELINING is advertised, Exim assumes that clients will use it; &"out
-of order"& commands that are &"expected"& do not count as protocol errors (see
-&%smtp_max_synprot_errors%&).
+PIPELINING extension to specific hosts. See also the &*no_pipelining*&
+control in section &<<SECTcontrols>>&. When PIPELINING is not advertised and
+&%smtp_enforce_sync%& is true, an Exim server enforces strict synchronization
+for each SMTP command and response. When PIPELINING is advertised, Exim assumes
+that clients will use it; &"out of order"& commands that are &"expected"& do
+not count as protocol errors (see &%smtp_max_synprot_errors%&).

 
 
 .option preserve_message_logs main boolean false
 
 
 .option preserve_message_logs main boolean false


@@ -13689,7 +14065,7 @@ volume of mail. Use with care!
 .cindex "name" "of local host"
 .cindex "host" "name of local"
 .cindex "local host" "name of"
 .cindex "name" "of local host"
 .cindex "host" "name of local"
 .cindex "local host" "name of"

-.cindex "&$primary_hostname$&"
+.vindex "&$primary_hostname$&"

 This specifies the name of the current host. It is used in the default EHLO or
 HELO command for outgoing SMTP messages (changeable via the &%helo_data%&
 option in the &(smtp)& transport), and as the default for &%qualify_domain%&.
 This specifies the name of the current host. It is used in the default EHLO or
 HELO command for outgoing SMTP messages (changeable via the &%helo_data%&
 option in the &(smtp)& transport), and as the default for &%qualify_domain%&.


@@ -13735,9 +14111,9 @@ different spool directories.
 
 
 .option prod_requires_admin main boolean true
 
 
 .option prod_requires_admin main boolean true

-.cindex "&%-M%& option"
-.cindex "&%-R%& option"
-.cindex "&%-q%& option"
+.oindex "&%-M%&"
+.oindex "&%-R%&"
+.oindex "&%-q%&"

 The &%-M%&, &%-R%&, and &%-q%& command-line options require the caller to be an
 admin user unless &%prod_requires_admin%& is set false. See also
 &%queue_list_requires_admin%&.
 The &%-M%&, &%-R%&, and &%-q%& command-line options require the caller to be an
 admin user unless &%prod_requires_admin%& is set false. See also
 &%queue_list_requires_admin%&.


@@ -13779,7 +14155,7 @@ next queue run. See also &%hold_domains%& and &%queue_smtp_domains%&.
 
 
 .option queue_list_requires_admin main boolean true
 
 
 .option queue_list_requires_admin main boolean true

-.cindex "&%-bp%& option"
+.oindex "&%-bp%&"

 The &%-bp%& command-line option, which lists the messages that are on the
 queue, requires the caller to be an admin user unless
 &%queue_list_requires_admin%& is set false. See also &%prod_requires_admin%&.
 The &%-bp%& command-line option, which lists the messages that are on the
 queue, requires the caller to be an admin user unless
 &%queue_list_requires_admin%& is set false. See also &%prod_requires_admin%&.


@@ -13805,7 +14181,7 @@ and &%-odi%& command line options override &%queue_only%& unless
 This option can be set to a colon-separated list of absolute path names, each
 one optionally preceded by &"smtp"&. When Exim is receiving a message,
 it tests for the existence of each listed path using a call to &[stat()]&. For
 This option can be set to a colon-separated list of absolute path names, each
 one optionally preceded by &"smtp"&. When Exim is receiving a message,
 it tests for the existence of each listed path using a call to &[stat()]&. For

-each path that exists, the corresponding queuing option is set.
+each path that exists, the corresponding queueing option is set.

 For paths with no prefix, &%queue_only%& is set; for paths prefixed by
 &"smtp"&, &%queue_smtp_domains%& is set to match all domains. So, for example,
 .code
 For paths with no prefix, &%queue_only%& is set; for paths prefixed by
 &"smtp"&, &%queue_smtp_domains%& is set to match all domains. So, for example,
 .code


@@ -13821,11 +14197,29 @@ causes Exim to behave as if &%queue_smtp_domains%& were set to &"*"& whenever
 .cindex "message" "queueing by load"
 If the system load average is higher than this value, incoming messages from
 all sources are queued, and no automatic deliveries are started. If this
 .cindex "message" "queueing by load"
 If the system load average is higher than this value, incoming messages from
 all sources are queued, and no automatic deliveries are started. If this

-happens during local or remote SMTP input, all subsequent messages on the same
-connection are queued. Deliveries will subsequently be performed by queue
-runner processes. This option has no effect on ancient operating systems on
-which Exim cannot determine the load average. See also
-&%deliver_queue_load_max%& and &%smtp_load_reserve%&.
+happens during local or remote SMTP input, all subsequent messages received on
+the same SMTP connection are queued by default, whatever happens to the load in
+the meantime, but this can be changed by setting &%queue_only_load_latch%&
+false.
+
+Deliveries will subsequently be performed by queue runner processes. This
+option has no effect on ancient operating systems on which Exim cannot
+determine the load average. See also &%deliver_queue_load_max%& and
+&%smtp_load_reserve%&.
+
+
+.option queue_only_load_latch main boolean true
+.cindex "load average" "re-evaluating per message"
+When this option is true (the default), once one message has been queued
+because the load average is higher than the value set by &%queue_only_load%&,
+all subsequent messages received on the same SMTP connection are also queued.
+This is a deliberate choice; even though the load average may fall below the
+threshold, it doesn't seem right to deliver later messages on the same
+connection when not delivering earlier ones. However, there are special
+circumstances such as very long-lived connections from scanning appliances
+where this is not the best strategy. In such cases, &%queue_only_load_latch%&
+should be set false. This causes the value of the load average to be
+re-evaluated for each message.

 
 
 .option queue_only_override main boolean true
 
 
 .option queue_only_override main boolean true


@@ -14019,7 +14413,7 @@ then take place at once is &%queue_run_max%& multiplied by
 
 If it is purely remote deliveries you want to control, use
 &%queue_smtp_domains%& instead of &%queue_only%&. This has the added benefit of
 
 If it is purely remote deliveries you want to control, use
 &%queue_smtp_domains%& instead of &%queue_only%&. This has the added benefit of

-doing the SMTP routing before queuing, so that several messages for the same
+doing the SMTP routing before queueing, so that several messages for the same

 host will eventually get delivered down the same connection.
 
 
 host will eventually get delivered down the same connection.
 
 


@@ -14099,7 +14493,7 @@ using TCP/IP), and the &%-bnq%& option was not set.
 This option controls the setting of the SO_KEEPALIVE option on incoming
 TCP/IP socket connections. When set, it causes the kernel to probe idle
 connections periodically, by sending packets with &"old"& sequence numbers. The
 This option controls the setting of the SO_KEEPALIVE option on incoming
 TCP/IP socket connections. When set, it causes the kernel to probe idle
 connections periodically, by sending packets with &"old"& sequence numbers. The

-other end of the connection should send an acknowledgement if the connection is
+other end of the connection should send an acknowledgment if the connection is

 still okay or a reset if the connection has been aborted. The reason for doing
 this is that it has the beneficial effect of freeing up certain types of
 connection that can get stuck when the remote host is disconnected without
 still okay or a reset if the connection has been aborted. The reason for doing
 this is that it has the beneficial effect of freeing up certain types of
 connection that can get stuck when the remote host is disconnected without


@@ -14117,8 +14511,12 @@ that Exim will accept. It applies only to the listening daemon; there is no
 control (in Exim) when incoming SMTP is being handled by &'inetd'&. If the
 value is set to zero, no limit is applied. However, it is required to be
 non-zero if either &%smtp_accept_max_per_host%& or &%smtp_accept_queue%& is
 control (in Exim) when incoming SMTP is being handled by &'inetd'&. If the
 value is set to zero, no limit is applied. However, it is required to be
 non-zero if either &%smtp_accept_max_per_host%& or &%smtp_accept_queue%& is

-set. See also &%smtp_accept_reserve%&.
+set. See also &%smtp_accept_reserve%& and &%smtp_load_reserve%&.

 
 

+A new SMTP connection is immediately rejected if the &%smtp_accept_max%& limit
+has been reached. If not, Exim first checks &%smtp_accept_max_per_host%&. If
+that limit has not been reached for the client host, &%smtp_accept_reserve%&
+and &%smtp_load_reserve%& are then checked before accepting the connection.

 
 
 .option smtp_accept_max_nonmail main integer 10
 
 
 .option smtp_accept_max_nonmail main integer 10


@@ -14132,7 +14530,7 @@ client host matches &%smtp_accept_max_nonmail_hosts%&.
 
 When a new message is expected, one occurrence of RSET is not counted. This
 allows a client to send one RSET between messages (this is not necessary,
 
 When a new message is expected, one occurrence of RSET is not counted. This
 allows a client to send one RSET between messages (this is not necessary,

-but some clients do it). Exim also allows one uncounted occurence of HELO
+but some clients do it). Exim also allows one uncounted occurrence of HELO

 or EHLO, and one occurrence of STARTTLS between messages. After
 starting up a TLS session, another EHLO is expected, and so it too is not
 counted. The first occurrence of AUTH in a connection, or immediately
 or EHLO, and one occurrence of STARTTLS between messages. After
 starting up a TLS session, another EHLO is expected, and so it too is not
 counted. The first occurrence of AUTH in a connection, or immediately


@@ -14147,9 +14545,12 @@ changing the value, you can exclude any badly-behaved hosts that you have to
 live with.
 
 
 live with.
 
 

+. Allow this long option name to split; give it unsplit as a fifth argument
+. for the automatic .oindex that is generated by .option.

 
 

-.option smtp_accept_max_per_connection main integer 1000
-.cindex "SMTP incoming message count" "limiting"
+.option "smtp_accept_max_per_ &~&~connection" main integer 1000 &&&
+         smtp_accept_max_per_connection
+.cindex "SMTP" "limiting incoming message count"

 .cindex "limit" "messages per SMTP connection"
 The value of this option limits the number of MAIL commands that Exim is
 prepared to accept over a single SMTP connection, whether or not each command
 .cindex "limit" "messages per SMTP connection"
 The value of this option limits the number of MAIL commands that Exim is
 prepared to accept over a single SMTP connection, whether or not each command


@@ -14166,9 +14567,10 @@ This option restricts the number of simultaneous IP connections from a single
 host (strictly, from a single IP address) to the Exim daemon. The option is
 expanded, to enable different limits to be applied to different hosts by
 reference to &$sender_host_address$&. Once the limit is reached, additional
 host (strictly, from a single IP address) to the Exim daemon. The option is
 expanded, to enable different limits to be applied to different hosts by
 reference to &$sender_host_address$&. Once the limit is reached, additional

-connection attempts from the same host are rejected with error code 421. The
-default value of zero imposes no limit. If this option is set, it is required
-that &%smtp_accept_max%& be non-zero.
+connection attempts from the same host are rejected with error code 421. This
+is entirely independent of &%smtp_accept_reserve%&. The option's default value
+of zero imposes no limit. If this option is set greater than zero, it is
+required that &%smtp_accept_max%& be non-zero.

 
 &*Warning*&: When setting this option you should not use any expansion
 constructions that take an appreciable amount of time. The expansion and test
 
 &*Warning*&: When setting this option you should not use any expansion
 constructions that take an appreciable amount of time. The expansion and test


@@ -14183,16 +14585,24 @@ doing this processing, it cannot accept any other incoming connections.
 .cindex "SMTP" "incoming connection count"
 .cindex "queueing incoming messages"
 .cindex "message" "queueing by SMTP connection count"
 .cindex "SMTP" "incoming connection count"
 .cindex "queueing incoming messages"
 .cindex "message" "queueing by SMTP connection count"

-If the number of simultaneous incoming SMTP calls handled via the listening
-daemon exceeds this value, messages received by SMTP are just placed on the
-queue; no delivery processes are started automatically. A value of zero implies
-no limit, and clearly any non-zero value is useful only if it is less than the
-&%smtp_accept_max%& value (unless that is zero). See also &%queue_only%&,
-&%queue_only_load%&, &%queue_smtp_domains%&, and the various &%-od%&&'x'&
-command line options.
+If the number of simultaneous incoming SMTP connections being handled via the
+listening daemon exceeds this value, messages received by SMTP are just placed
+on the queue; no delivery processes are started automatically. The count is
+fixed at the start of an SMTP connection. It cannot be updated in the
+subprocess that receives messages, and so the queueing or not queueing applies
+to all messages received in the same connection.
+
+A value of zero implies no limit, and clearly any non-zero value is useful only
+if it is less than the &%smtp_accept_max%& value (unless that is zero). See
+also &%queue_only%&, &%queue_only_load%&, &%queue_smtp_domains%&, and the
+various &%-od%&&'x'& command line options.
+

 
 

+. Allow this long option name to split; give it unsplit as a fifth argument
+. for the automatic .oindex that is generated by .option.

 
 

-.option smtp_accept_queue_per_connection main integer 10
+.option "smtp_accept_queue_per_ &~&~connection" main integer 10 &&&
+         smtp_accept_queue_per_connection

 .cindex "queueing incoming messages"
 .cindex "message" "queueing by message count"
 This option limits the number of delivery processes that Exim starts
 .cindex "queueing incoming messages"
 .cindex "message" "queueing by message count"
 This option limits the number of delivery processes that Exim starts


@@ -14214,27 +14624,28 @@ number of SMTP connections that are reserved for connections from the hosts
 that are specified in &%smtp_reserve_hosts%&. The value set in
 &%smtp_accept_max%& includes this reserve pool. The specified hosts are not
 restricted to this number of connections; the option specifies a minimum number
 that are specified in &%smtp_reserve_hosts%&. The value set in
 &%smtp_accept_max%& includes this reserve pool. The specified hosts are not
 restricted to this number of connections; the option specifies a minimum number

-of connection slots for them, not a maximum. It is a guarantee that that group
-of hosts can always get at least &%smtp_accept_reserve%& connections.
+of connection slots for them, not a maximum. It is a guarantee that this group
+of hosts can always get at least &%smtp_accept_reserve%& connections. However,
+the limit specified by &%smtp_accept_max_per_host%& is still applied to each
+individual host.

 
 For example, if &%smtp_accept_max%& is set to 50 and &%smtp_accept_reserve%& is
 set to 5, once there are 45 active connections (from any hosts), new
 
 For example, if &%smtp_accept_max%& is set to 50 and &%smtp_accept_reserve%& is
 set to 5, once there are 45 active connections (from any hosts), new

-connections are accepted only from hosts listed in &%smtp_reserve_hosts%&.
-See also &%smtp_accept_max_per_host%&.
+connections are accepted only from hosts listed in &%smtp_reserve_hosts%&,
+provided the other criteria for acceptance are met.

 
 
 .option smtp_active_hostname main string&!! unset
 
 
 .option smtp_active_hostname main string&!! unset

-.new

 .cindex "host" "name in SMTP responses"
 .cindex "SMTP" "host name in responses"
 .cindex "host" "name in SMTP responses"
 .cindex "SMTP" "host name in responses"

-.cindex "&$primary_hostname$&"
+.vindex "&$primary_hostname$&"

 This option is provided for multi-homed servers that want to masquerade as
 several different hosts. At the start of an incoming SMTP connection, its value
 is expanded and used instead of the value of &$primary_hostname$& in SMTP
 responses. For example, it is used as domain name in the response to an
 incoming HELO or EHLO command.
 
 This option is provided for multi-homed servers that want to masquerade as
 several different hosts. At the start of an incoming SMTP connection, its value
 is expanded and used instead of the value of &$primary_hostname$& in SMTP
 responses. For example, it is used as domain name in the response to an
 incoming HELO or EHLO command.
 

-.cindex "&$smtp_active_hostname$&"
+.vindex "&$smtp_active_hostname$&"

 The active hostname is placed in the &$smtp_active_hostname$& variable, which
 is saved with any messages that are received. It is therefore available for use
 in routers and transports when the message is later delivered.
 The active hostname is placed in the &$smtp_active_hostname$& variable, which
 is saved with any messages that are received. It is therefore available for use
 in routers and transports when the message is later delivered.


@@ -14254,7 +14665,6 @@ Although &$smtp_active_hostname$& is primarily concerned with incoming
 messages, it is also used as the default for HELO commands in callout
 verification if there is no remote transport from which to obtain a
 &%helo_data%& value.
 messages, it is also used as the default for HELO commands in callout
 verification if there is no remote transport from which to obtain a
 &%helo_data%& value.

-.wen

 
 .option smtp_banner main string&!! "see below"
 .cindex "SMTP" "welcome banner"
 
 .option smtp_banner main string&!! "see below"
 .cindex "SMTP" "welcome banner"


@@ -14276,7 +14686,7 @@ multiline response).
 
 .option smtp_check_spool_space main boolean true
 .cindex "checking disk space"
 
 .option smtp_check_spool_space main boolean true
 .cindex "checking disk space"

-.cindex "disk space" "checking"
+.cindex "disk space, checking"

 .cindex "spool directory" "checking space"
 When this option is set, if an incoming SMTP session encounters the SIZE
 option on a MAIL command, it checks that there is enough space in the
 .cindex "spool directory" "checking space"
 When this option is set, if an incoming SMTP session encounters the SIZE
 option on a MAIL command, it checks that there is enough space in the


@@ -14324,7 +14734,7 @@ hosts), you can do so by an appropriate use of a &%control%& modifier in an ACL
 
 .option smtp_etrn_command main string&!! unset
 .cindex "ETRN" "command to be run"
 
 .option smtp_etrn_command main string&!! unset
 .cindex "ETRN" "command to be run"

-.cindex "&$domain$&"
+.vindex "&$domain$&"

 If this option is set, the given command is run whenever an SMTP ETRN
 command is received from a host that is permitted to issue such commands (see
 chapter &<<CHAPACL>>&). The string is split up into separate arguments which
 If this option is set, the given command is run whenever an SMTP ETRN
 command is received from a host that is permitted to issue such commands (see
 chapter &<<CHAPACL>>&). The string is split up into separate arguments which


@@ -14449,7 +14859,7 @@ See &%smtp_ratelimit_hosts%& above.
 
 .option smtp_receive_timeout main time 5m
 .cindex "timeout" "for SMTP input"
 
 .option smtp_receive_timeout main time 5m
 .cindex "timeout" "for SMTP input"

-.cindex "SMTP timeout" "input"
+.cindex "SMTP" "input timeout"

 This sets a timeout value for SMTP reception. It applies to all forms of SMTP
 input, including batch SMTP. If a line of input (either an SMTP command or a
 data line) is not received within this time, the SMTP connection is dropped and
 This sets a timeout value for SMTP reception. It applies to all forms of SMTP
 input, including batch SMTP. If a line of input (either an SMTP command or a
 data line) is not received within this time, the SMTP connection is dropped and


@@ -14463,7 +14873,7 @@ The former means that Exim was expecting to read an SMTP command; the latter
 means that it was in the DATA phase, reading the contents of a message.
 
 
 means that it was in the DATA phase, reading the contents of a message.
 
 

-.cindex "&%-os%& option"
+.oindex "&%-os%&"

 The value set by this option can be overridden by the
 &%-os%& command-line option. A setting of zero time disables the timeout, but
 this should never be used for SMTP over TCP/IP. (It can be useful in some cases
 The value set by this option can be overridden by the
 &%-os%& command-line option. A setting of zero time disables the timeout, but
 this should never be used for SMTP over TCP/IP. (It can be useful in some cases


@@ -14478,11 +14888,11 @@ This option defines hosts for which SMTP connections are reserved; see
 
 .option smtp_return_error_details main boolean false
 .cindex "SMTP" "details policy failures"
 
 .option smtp_return_error_details main boolean false
 .cindex "SMTP" "details policy failures"

-.cindex "policy control rejection" "returning details"
+.cindex "policy control" "rejection, returning details"

 In the default state, Exim uses bland messages such as
 &"Administrative prohibition"& when it rejects SMTP commands for policy
 reasons. Many sysadmins like this because it gives away little information
 In the default state, Exim uses bland messages such as
 &"Administrative prohibition"& when it rejects SMTP commands for policy
 reasons. Many sysadmins like this because it gives away little information

-to spammers. However, some other syadmins who are applying strict checking
+to spammers. However, some other sysadmins who are applying strict checking

 policies want to give out much fuller information about failures. Setting
 &%smtp_return_error_details%& true causes Exim to be more forthcoming. For
 example, instead of &"Administrative prohibition"&, it might give:
 policies want to give out much fuller information about failures. Setting
 &%smtp_return_error_details%& true causes Exim to be more forthcoming. For
 example, instead of &"Administrative prohibition"&, it might give:


@@ -14505,7 +14915,7 @@ See section &<<SECTscanspamass>>& for more details.
 .option split_spool_directory main boolean false
 .cindex "multiple spool directories"
 .cindex "spool directory" "split"
 .option split_spool_directory main boolean false
 .cindex "multiple spool directories"
 .cindex "spool directory" "split"

-.cindex "directories" "multiple"
+.cindex "directories, multiple"

 If this option is set, it causes Exim to split its input directory into 62
 subdirectories, each with a single alphanumeric character as its name. The
 sixth character of the message id is used to allocate messages to
 If this option is set, it causes Exim to split its input directory into 62
 subdirectories, each with a single alphanumeric character as its name. The
 sixth character of the message id is used to allocate messages to


@@ -14553,21 +14963,19 @@ By using this option to override the compiled-in path, it is possible to run
 tests of Exim without using the standard spool.
 
 .option sqlite_lock_timeout main time 5s
 tests of Exim without using the standard spool.
 
 .option sqlite_lock_timeout main time 5s

-.cindex "sqlite" "lock timeout"
+.cindex "sqlite lookup type" "lock timeout"

 This option controls the timeout that the &(sqlite)& lookup uses when trying to
 access an SQLite database. See section &<<SECTsqlite>>& for more details.
 
 This option controls the timeout that the &(sqlite)& lookup uses when trying to
 access an SQLite database. See section &<<SECTsqlite>>& for more details.
 

-.new

 .option strict_acl_vars main boolean false
 .option strict_acl_vars main boolean false

-.cindex "ACL variables" "handling unset"
+.cindex "&ACL;" "variables, handling unset"

 This option controls what happens if a syntactically valid but undefined ACL
 variable is referenced. If it is false (the default), an empty string
 is substituted; if it is true, an error is generated. See section
 &<<SECTaclvariables>>& for details of ACL variables.
 This option controls what happens if a syntactically valid but undefined ACL
 variable is referenced. If it is false (the default), an empty string
 is substituted; if it is true, an error is generated. See section
 &<<SECTaclvariables>>& for details of ACL variables.

-.wen

 
 .option strip_excess_angle_brackets main boolean false
 
 .option strip_excess_angle_brackets main boolean false

-.cindex "angle brackets" "excess"
+.cindex "angle brackets, excess"

 If this option is set, redundant pairs of angle brackets round &"route-addr"&
 items in addresses are stripped. For example, &'<<xxx@a.b.c.d>>'& is
 treated as &'<xxx@a.b.c.d>'&. If this is in the envelope and the message is
 If this option is set, redundant pairs of angle brackets round &"route-addr"&
 items in addresses are stripped. For example, &'<<xxx@a.b.c.d>>'& is
 treated as &'<xxx@a.b.c.d>'&. If this is in the envelope and the message is


@@ -14639,7 +15047,7 @@ which transports are to be used. Details of this facility are given in chapter
 
 
 .option system_filter_directory_transport main string&!! unset
 
 
 .option system_filter_directory_transport main string&!! unset

-.cindex "&$address_file$&"
+.vindex "&$address_file$&"

 This sets the name of the transport driver that is to be used when the
 &%save%& command in a system message filter specifies a path ending in &"/"&,
 implying delivery of each message into a separate file in some directory.
 This sets the name of the transport driver that is to be used when the
 &%save%& command in a system message filter specifies a path ending in &"/"&,
 implying delivery of each message into a separate file in some directory.


@@ -14660,7 +15068,7 @@ with the user. The value may be numerical or symbolic.
 
 .option system_filter_pipe_transport main string&!! unset
 .cindex "&(pipe)& transport" "for system filter"
 
 .option system_filter_pipe_transport main string&!! unset
 .cindex "&(pipe)& transport" "for system filter"

-.cindex "&$address_pipe$&"
+.vindex "&$address_pipe$&"

 This specifies the transport driver that is to be used when a &%pipe%& command
 is used in a system filter. During the delivery, the variable &$address_pipe$&
 contains the pipe command.
 This specifies the transport driver that is to be used when a &%pipe%& command
 is used in a system filter. During the delivery, the variable &$address_pipe$&
 contains the pipe command.


@@ -14713,15 +15121,13 @@ sender, in a similar manner to cancellation by the &%-Mg%& command line option.
 If you want to timeout frozen bounce messages earlier than other kinds of
 frozen message, see &%ignore_bounce_errors_after%&.
 
 If you want to timeout frozen bounce messages earlier than other kinds of
 frozen message, see &%ignore_bounce_errors_after%&.
 

-.new

 &*Note:*& the default value of zero means no timeouts; with this setting,
 frozen messages remain on the queue forever (except for any frozen bounce
 messages that are released by &%ignore_bounce_errors_after%&).
 &*Note:*& the default value of zero means no timeouts; with this setting,
 frozen messages remain on the queue forever (except for any frozen bounce
 messages that are released by &%ignore_bounce_errors_after%&).

-.wen

 
 
 .option timezone main string unset
 
 
 .option timezone main string unset

-.cindex "timezone" "setting"
+.cindex "timezone, setting"

 The value of &%timezone%& is used to set the environment variable TZ while
 running Exim (if it is different on entry). This ensures that all timestamps
 created by Exim are in the required timezone. If you want all your timestamps
 The value of &%timezone%& is used to set the environment variable TZ while
 running Exim (if it is different on entry). This ensures that all timestamps
 created by Exim are in the required timezone. If you want all your timestamps


@@ -14749,7 +15155,7 @@ chapter &<<CHAPTLS>>& for details of Exim's support for TLS.
 
 .option tls_certificate main string&!! unset
 .cindex "TLS" "server certificate; location of"
 
 .option tls_certificate main string&!! unset
 .cindex "TLS" "server certificate; location of"

-.cindex "certificate for server" "location of"
+.cindex "certificate" "server, location of"

 The value of this option is expanded, and must then be the absolute path to a
 file which contains the server's certificates. The server's private key is also
 assumed to be in this file if &%tls_privatekey%& is unset. See chapter
 The value of this option is expanded, and must then be the absolute path to a
 file which contains the server's certificates. The server's private key is also
 assumed to be in this file if &%tls_privatekey%& is unset. See chapter


@@ -14836,14 +15242,18 @@ option must be set to the name of a single file if you are using GnuTLS.
 .cindex "TLS" "client certificate verification"
 .cindex "certificate" "verification of client"
 This option, along with &%tls_try_verify_hosts%&, controls the checking of
 .cindex "TLS" "client certificate verification"
 .cindex "certificate" "verification of client"
 This option, along with &%tls_try_verify_hosts%&, controls the checking of

-certificates from clients.
-The expected certificates are defined by &%tls_verify_certificates%&, which
-must be set. A configuration error occurs if either &%tls_verify_hosts%& or
-&%tls_try_verify_hosts%& is set and &%tls_verify_certificates%& is not set.
+certificates from clients. The expected certificates are defined by
+&%tls_verify_certificates%&, which must be set. A configuration error occurs if
+either &%tls_verify_hosts%& or &%tls_try_verify_hosts%& is set and
+&%tls_verify_certificates%& is not set.

 
 Any client that matches &%tls_verify_hosts%& is constrained by
 
 Any client that matches &%tls_verify_hosts%& is constrained by

-&%tls_verify_certificates%&. The client must present one of the listed
-certificates. If it does not, the connection is aborted.
+&%tls_verify_certificates%&. When the client initiates a TLS session, it must
+present one of the listed certificates. If it does not, the connection is
+aborted. &*Warning*&: Including a host in &%tls_verify_hosts%& does not require
+the host to use TLS. It can still send SMTP commands through unencrypted
+connections. Forcing a client to use TLS has to be done separately using an
+ACL to reject inappropriate commands when the connection is not encrypted.

 
 A weaker form of checking is provided by &%tls_try_verify_hosts%&. If a client
 matches this option (but not &%tls_verify_hosts%&), Exim requests a
 
 A weaker form of checking is provided by &%tls_try_verify_hosts%&. If a client
 matches this option (but not &%tls_verify_hosts%&), Exim requests a


@@ -14859,8 +15269,8 @@ certificates.
 
 
 .option trusted_groups main "string list&!!" unset
 
 
 .option trusted_groups main "string list&!!" unset

-.cindex "trusted group"
-.cindex "group" "trusted"
+.cindex "trusted groups"
+.cindex "groups" "trusted"

 This option is expanded just once, at the start of Exim's processing. If this
 option is set, any process that is running in one of the listed groups, or
 which has one of them as a supplementary group, is trusted. The groups can be
 This option is expanded just once, at the start of Exim's processing. If this
 option is set, any process that is running in one of the listed groups, or
 which has one of them as a supplementary group, is trusted. The groups can be


@@ -14870,7 +15280,7 @@ details of what trusted callers are permitted to do. If neither
 are trusted.
 
 .option trusted_users main "string list&!!" unset
 are trusted.
 
 .option trusted_users main "string list&!!" unset

-.cindex "trusted user"
+.cindex "trusted users"

 .cindex "user" "trusted"
 This option is expanded just once, at the start of Exim's processing. If this
 option is set, any process that is running as one of the listed users is
 .cindex "user" "trusted"
 This option is expanded just once, at the start of Exim's processing. If this
 option is set, any process that is running as one of the listed users is


@@ -14881,7 +15291,7 @@ Exim user are trusted.
 
 .option unknown_login main string&!! unset
 .cindex "uid (user id)" "unknown caller"
 
 .option unknown_login main string&!! unset
 .cindex "uid (user id)" "unknown caller"

-.cindex "&$caller_uid$&"
+.vindex "&$caller_uid$&"

 This is a specialized feature for use in unusual configurations. By default, if
 the uid of the caller of Exim cannot be looked up using &[getpwuid()]&, Exim
 gives up. The &%unknown_login%& option can be used to set a login name to be
 This is a specialized feature for use in unusual configurations. By default, if
 the uid of the caller of Exim cannot be looked up using &[getpwuid()]&, Exim
 gives up. The &%unknown_login%& option can be used to set a login name to be


@@ -14894,9 +15304,9 @@ is used for the user's real name (gecos field), unless this has been set by the
 See &%unknown_login%&.
 
 .option untrusted_set_sender main "address list&!!" unset
 See &%unknown_login%&.
 
 .option untrusted_set_sender main "address list&!!" unset

-.cindex "trusted user"
+.cindex "trusted users"

 .cindex "sender" "setting by untrusted user"
 .cindex "sender" "setting by untrusted user"

-.cindex "untrusted user" "setting sender"
+.cindex "untrusted user setting sender"

 .cindex "user" "untrusted setting sender"
 .cindex "envelope sender"
 When an untrusted user submits a message to Exim using the standard input, Exim
 .cindex "user" "untrusted setting sender"
 .cindex "envelope sender"
 When an untrusted user submits a message to Exim using the standard input, Exim


@@ -14910,7 +15320,7 @@ to declare that a message should never generate any bounces. For example:
 .code
 exim -f '<>' user@domain.example
 .endd
 .code
 exim -f '<>' user@domain.example
 .endd

-.cindex "&$sender_ident$&"
+.vindex "&$sender_ident$&"

 The &%untrusted_set_sender%& option allows you to permit untrusted users to set
 other envelope sender addresses in a controlled way. When it is set, untrusted
 users are allowed to set envelope sender addresses that match any of the
 The &%untrusted_set_sender%& option allows you to permit untrusted users to set
 other envelope sender addresses in a controlled way. When it is set, untrusted
 users are allowed to set envelope sender addresses that match any of the


@@ -15018,7 +15428,7 @@ router declines, the value of &%address_data%& remains unchanged, and the
 &%more%& option controls what happens next. Other expansion failures cause
 delivery of the address to be deferred.
 
 &%more%& option controls what happens next. Other expansion failures cause
 delivery of the address to be deferred.
 

-.cindex "&$address_data$&"
+.vindex "&$address_data$&"

 When the expansion succeeds, the value is retained with the address, and can be
 accessed using the variable &$address_data$& in the current router, subsequent
 routers, and the eventual transport.
 When the expansion succeeds, the value is retained with the address, and can be
 accessed using the variable &$address_data$& in the current router, subsequent
 routers, and the eventual transport.


@@ -15048,20 +15458,18 @@ file = ${extract{mailbox}{$address_data}}
 This makes the configuration file less messy, and also reduces the number of
 lookups (though Exim does cache lookups).
 
 This makes the configuration file less messy, and also reduces the number of
 lookups (though Exim does cache lookups).
 

+.vindex "&$sender_address_data$&"
+.vindex "&$address_data$&"

 The &%address_data%& facility is also useful as a means of passing information
 from one router to another, and from a router to a transport. In addition, if
 The &%address_data%& facility is also useful as a means of passing information
 from one router to another, and from a router to a transport. In addition, if

-
-.cindex "&$sender_address_data$&"
-.cindex "&$address_data$&"
-When &$address_data$& is set by a router when verifying a recipient address
-from an ACL, it remains available for use in the rest of the ACL statement.
-After verifying a sender, the value is transferred to &$sender_address_data$&.
-
+&$address_data$& is set by a router when verifying a recipient address from an
+ACL, it remains available for use in the rest of the ACL statement. After
+verifying a sender, the value is transferred to &$sender_address_data$&.

 
 
 
 .option address_test routers&!? boolean true
 
 
 
 .option address_test routers&!? boolean true

-.cindex "&%-bt%& option"
+.oindex "&%-bt%&"

 .cindex "router" "skipping when address testing"
 If this option is set false, the router is skipped when routing is being tested
 by means of the &%-bt%& command line option. This can be a convenience when
 .cindex "router" "skipping when address testing"
 If this option is set false, the router is skipped when routing is being tested
 by means of the &%-bt%& command line option. This can be a convenience when


@@ -15107,9 +15515,9 @@ part lists (for example, &%local_parts%&), case-sensitive matching can be
 turned on by &"+caseful"& as a list item. See section &<<SECTcasletadd>>& for
 more details.
 
 turned on by &"+caseful"& as a list item. See section &<<SECTcasletadd>>& for
 more details.
 

-.cindex "&$local_part$&"
-.cindex "&$original_local_part$&"
-.cindex "&$parent_local_part$&"
+.vindex "&$local_part$&"
+.vindex "&$original_local_part$&"
+.vindex "&$parent_local_part$&"

 The value of the &$local_part$& variable is forced to lower case while a
 router is running unless &%caseful_local_part%& is set. When a router assigns
 an address to a transport, the value of &$local_part$& when the transport runs
 The value of the &$local_part$& variable is forced to lower case while a
 router is running unless &%caseful_local_part%& is set. When a router assigns
 an address to a transport, the value of &$local_part$& when the transport runs


@@ -15125,10 +15533,10 @@ modifier that can be used to specify case-sensitive processing within the ACL
 
 
 .option check_local_user routers&!? boolean false
 
 
 .option check_local_user routers&!? boolean false

-.cindex "local user" "checking in router"
+.cindex "local user, checking in router"

 .cindex "router" "checking for local user"
 .cindex "&_/etc/passwd_&"
 .cindex "router" "checking for local user"
 .cindex "&_/etc/passwd_&"

-.cindex "&$home$&"
+.vindex "&$home$&"

 When this option is true, Exim checks that the local part of the recipient
 address (with affixes removed if relevant) is the name of an account on the
 local system. The check is done by calling the &[getpwnam()]& function rather
 When this option is true, Exim checks that the local part of the recipient
 address (with affixes removed if relevant) is the name of an account on the
 local system. The check is done by calling the &[getpwnam()]& function rather


@@ -15206,7 +15614,7 @@ transport option of the same name.
 
 .option domains routers&!? "domain list&!!" unset
 .cindex "router" "restricting to specific domains"
 
 .option domains routers&!? "domain list&!!" unset
 .cindex "router" "restricting to specific domains"

-.cindex "&$domain_data$&"
+.vindex "&$domain_data$&"

 If this option is set, the router is skipped unless the current domain matches
 the list. If the match is achieved by means of a file lookup, the data that the
 lookup returned for the domain is placed in &$domain_data$& for use in string
 If this option is set, the router is skipped unless the current domain matches
 the list. If the match is achieved by means of a file lookup, the data that the
 lookup returned for the domain is placed in &$domain_data$& for use in string


@@ -15256,7 +15664,7 @@ no longer gives rise to a bounce message; the error is discarded. If the
 address is delivered to a remote host, the return path is set to &`<>`&, unless
 overridden by the &%return_path%& option on the transport.
 
 address is delivered to a remote host, the return path is set to &`<>`&, unless
 overridden by the &%return_path%& option on the transport.
 

-.cindex "&$address_data$&"
+.vindex "&$address_data$&"

 If for some reason you want to discard local errors, but use a non-empty
 MAIL command for remote delivery, you can preserve the original return
 path in &$address_data$& in the router, and reinstate it in the transport by
 If for some reason you want to discard local errors, but use a non-empty
 MAIL command for remote delivery, you can preserve the original return
 path in &$address_data$& in the router, and reinstate it in the transport by


@@ -15358,8 +15766,16 @@ failures are treated as configuration errors.
 &*Warning 1*&: The &%headers_add%& option cannot be used for a &(redirect)&
 router that has the &%one_time%& option set.
 
 &*Warning 1*&: The &%headers_add%& option cannot be used for a &(redirect)&
 router that has the &%one_time%& option set.
 

+.cindex "duplicate addresses"
+.oindex "&%unseen%&"

 &*Warning 2*&: If the &%unseen%& option is set on the router, all header
 additions are deleted when the address is passed on to subsequent routers.
 &*Warning 2*&: If the &%unseen%& option is set on the router, all header
 additions are deleted when the address is passed on to subsequent routers.

+For a &%redirect%& router, if a generated address is the same as the incoming
+address, this can lead to duplicate addresses with different header
+modifications. Exim does not do duplicate deliveries (except, in certain
+circumstances, to pipes -- see section &<<SECTdupaddr>>&), but it is undefined
+which of the duplicates is discarded, so this ambiguous situation should be
+avoided. The &%repeat_use%& option of the &%redirect%& router may be of help.

 
 
 
 
 
 


@@ -15385,7 +15801,8 @@ router that has the &%one_time%& option set.
 
 &*Warning 2*&: If the &%unseen%& option is set on the router, all header
 removal requests are deleted when the address is passed on to subsequent
 
 &*Warning 2*&: If the &%unseen%& option is set on the router, all header
 removal requests are deleted when the address is passed on to subsequent

-routers.
+routers, and this can lead to problems with duplicates -- see the similar
+warning for &%headers_add%& above.

 
 
 .option ignore_target_hosts routers "host list&!!" unset
 
 
 .option ignore_target_hosts routers "host list&!!" unset


@@ -15424,7 +15841,7 @@ addresses. Because, like all host lists, the value of &%ignore_target_hosts%&
 is expanded before use as a list, it is possible to make it dependent on the
 domain that is being routed.
 
 is expanded before use as a list, it is possible to make it dependent on the
 domain that is being routed.
 

-.cindex "&$host_address$&"
+.vindex "&$host_address$&"

 During its expansion, &$host_address$& is set to the IP address that is being
 checked.
 
 During its expansion, &$host_address$& is set to the IP address that is being
 checked.
 


@@ -15443,7 +15860,7 @@ and &%user%& and the discussion in chapter &<<CHAPenvironment>>&.
 
 .option local_part_prefix routers&!? "string list" unset
 .cindex "router" "prefix for local part"
 
 .option local_part_prefix routers&!? "string list" unset
 .cindex "router" "prefix for local part"

-.cindex "prefix" "for local part; used in router"
+.cindex "prefix" "for local part, used in router"

 If this option is set, the router is skipped unless the local part starts with
 one of the given strings, or &%local_part_prefix_optional%& is true. See
 section &<<SECTrouprecon>>& for a list of the order in which preconditions are
 If this option is set, the router is skipped unless the local part starts with
 one of the given strings, or &%local_part_prefix_optional%& is true. See
 section &<<SECTrouprecon>>& for a list of the order in which preconditions are


@@ -15459,8 +15876,8 @@ some character that does not occur in normal local parts.
 Wildcarding can be used to set up multiple user mailboxes, as described in
 section &<<SECTmulbox>>&.
 
 Wildcarding can be used to set up multiple user mailboxes, as described in
 section &<<SECTmulbox>>&.
 

-.cindex "&$local_part$&"
-.cindex "&$local_part_prefix$&"
+.vindex "&$local_part$&"
+.vindex "&$local_part_prefix$&"

 During the testing of the &%local_parts%& option, and while the router is
 running, the prefix is removed from the local part, and is available in the
 expansion variable &$local_part_prefix$&. When a message is being delivered, if
 During the testing of the &%local_parts%& option, and while the router is
 running, the prefix is removed from the local part, and is available in the
 expansion variable &$local_part_prefix$&. When a message is being delivered, if


@@ -15487,6 +15904,13 @@ real_localuser:
   check_local_user
   transport = local_delivery
 .endd
   check_local_user
   transport = local_delivery
 .endd

+For security, it would probably be a good idea to restrict the use of this
+router to locally-generated messages, using a condition such as this:
+.code
+  condition = ${if match {$sender_host_address}\
+                         {\N^(|127\.0\.0\.1)$\N}}
+.endd
+

 If both &%local_part_prefix%& and &%local_part_suffix%& are set for a router,
 both conditions must be met if not optional. Care must be taken if wildcards
 are used in both a prefix and a suffix on the same router. Different
 If both &%local_part_prefix%& and &%local_part_suffix%& are set for a router,
 both conditions must be met if not optional. Care must be taken if wildcards
 are used in both a prefix and a suffix on the same router. Different


@@ -15527,7 +15951,7 @@ example:
 .code
 local_parts = dbm;/usr/local/specials/$domain
 .endd
 .code
 local_parts = dbm;/usr/local/specials/$domain
 .endd

-.cindex "&$local_part_data$&"
+.vindex "&$local_part_data$&"

 If the match is achieved by a lookup, the data that the lookup returned
 for the local part is placed in the variable &$local_part_data$& for use in
 expansions of the router's private options. You might use this option, for
 If the match is achieved by a lookup, the data that the lookup returned
 for the local part is placed in the variable &$local_part_data$& for use in
 expansions of the router's private options. You might use this option, for


@@ -15564,7 +15988,7 @@ delivery to be deferred.
 
 If this option is set false, and the router declines to handle the address, no
 further routers are tried, routing fails, and the address is bounced.
 
 If this option is set false, and the router declines to handle the address, no
 further routers are tried, routing fails, and the address is bounced.

-.cindex "&%self%& option"
+.oindex "&%self%&"

 However, if the router explicitly passes an address to the following router by
 means of the setting
 .code
 However, if the router explicitly passes an address to the following router by
 means of the setting
 .code


@@ -15596,12 +16020,15 @@ applies to all of them.
 
 .option pass_router routers string unset
 .cindex "router" "go to after &""pass""&"
 
 .option pass_router routers string unset
 .cindex "router" "go to after &""pass""&"

-When a router returns &"pass"&, the address is normally handed on to the next
+Routers that recognize the generic &%self%& option (&(dnslookup)&,
+&(ipliteral)&, and &(manualroute)&) are able to return &"pass"&, forcing
+routing to continue, and overriding a false setting of &%more%&. When one of
+these routers returns &"pass"&, the address is normally handed on to the next

 router in sequence. This can be changed by setting &%pass_router%& to the name
 of another router. However (unlike &%redirect_router%&) the named router must
 be below the current router, to avoid loops. Note that this option applies only
 to the special case of &"pass"&. It does not apply when a router returns
 router in sequence. This can be changed by setting &%pass_router%& to the name
 of another router. However (unlike &%redirect_router%&) the named router must
 be below the current router, to avoid loops. Note that this option applies only
 to the special case of &"pass"&. It does not apply when a router returns

-&"decline"&.
+&"decline"& because it cannot handle an address.

 
 
 
 
 
 


@@ -15728,7 +16155,7 @@ independently; this setting does not become attached to them.
 .option router_home_directory routers string&!! unset
 .cindex "router" "home directory for"
 .cindex "home directory" "for router"
 .option router_home_directory routers string&!! unset
 .cindex "router" "home directory for"
 .cindex "home directory" "for router"

-.cindex "&$home$&"
+.vindex "&$home$&"

 This option sets a home directory for use while the router is running. (Compare
 &%transport_home_directory%&, which sets a home directory for later
 transporting.) In particular, if used on a &(redirect)& router, this option
 This option sets a home directory for use while the router is running. (Compare
 &%transport_home_directory%&, which sets a home directory for later
 transporting.) In particular, if used on a &(redirect)& router, this option


@@ -15800,8 +16227,8 @@ reprocessed by the routers. Any headers that contain the original domain are
 rewritten.
 
 .vitem &%pass%&
 rewritten.
 
 .vitem &%pass%&

-.cindex "&%more%& option"
-.cindex "&$self_hostname$&"
+.oindex "&%more%&"
+.vindex "&$self_hostname$&"

 The router passes the address to the next router, or to the router named in the
 &%pass_router%& option if it is set. This overrides &%no_more%&. During
 subsequent routing and delivery, the variable &$self_hostname$& contains the
 The router passes the address to the next router, or to the router named in the
 &%pass_router%& option if it is set. This overrides &%no_more%&. During
 subsequent routing and delivery, the variable &$self_hostname$& contains the


@@ -15859,7 +16286,7 @@ is inadequate or broken. Because this is an extremely uncommon requirement, the
 code to support this option is not included in the Exim binary unless
 SUPPORT_TRANSLATE_IP_ADDRESS=yes is set in &_Local/Makefile_&.
 
 code to support this option is not included in the Exim binary unless
 SUPPORT_TRANSLATE_IP_ADDRESS=yes is set in &_Local/Makefile_&.
 

-.cindex "&$host_address$&"
+.vindex "&$host_address$&"

 The &%translate_ip_address%& string is expanded for every IP address generated
 by the router, with the generated address set in &$host_address$&. If the
 expansion is forced to fail, no action is taken.
 The &%translate_ip_address%& string is expanded for every IP address generated
 by the router, with the generated address set in &$host_address$&. If the
 expansion is forced to fail, no action is taken.


@@ -15927,7 +16354,7 @@ logged, and delivery is deferred.
 
 If the transport does not specify a home directory, and
 &%transport_home_directory%& is not set for the router, the home directory for
 
 If the transport does not specify a home directory, and
 &%transport_home_directory%& is not set for the router, the home directory for

-the tranport is taken from the password data if &%check_local_user%& is set for
+the transport is taken from the password data if &%check_local_user%& is set for

 the router. Otherwise it is taken from &%router_home_directory%& if that option
 is set; if not, no home directory is set for the transport.
 
 the router. Otherwise it is taken from &%router_home_directory%& if that option
 is set; if not, no home directory is set for the transport.
 


@@ -15953,21 +16380,28 @@ the value of &%unseen%& contains expansion items (and therefore, presumably, is
 sometimes true and sometimes false).
 
 .cindex "copy of message (&%unseen%& option)"
 sometimes true and sometimes false).
 
 .cindex "copy of message (&%unseen%& option)"

-The &%unseen%& option can be used to cause copies of messages to be delivered
-to some other destination, while also carrying out a normal delivery. In
-effect, the current address is made into a &"parent"& that has two children &--
-one that is delivered as specified by this router, and a clone that goes on to
-be routed further. For this reason, &%unseen%& may not be combined with the
+Setting the &%unseen%& option has a similar effect to the &%unseen%& command
+qualifier in filter files. It can be used to cause copies of messages to be
+delivered to some other destination, while also carrying out a normal delivery.
+In effect, the current address is made into a &"parent"& that has two children
+&-- one that is delivered as specified by this router, and a clone that goes on
+to be routed further. For this reason, &%unseen%& may not be combined with the

 &%one_time%& option in a &(redirect)& router.
 
 &*Warning*&: Header lines added to the address (or specified for removal) by
 this router or by previous routers affect the &"unseen"& copy of the message
 only. The clone that continues to be processed by further routers starts with
 &%one_time%& option in a &(redirect)& router.
 
 &*Warning*&: Header lines added to the address (or specified for removal) by
 this router or by previous routers affect the &"unseen"& copy of the message
 only. The clone that continues to be processed by further routers starts with

-no added headers and none specified for removal. However, any data that was set
-by the &%address_data%& option in the current or previous routers is passed on.
-Setting the &%unseen%& option has a similar effect to the &%unseen%& command
-qualifier in filter files.
+no added headers and none specified for removal. For a &%redirect%& router, if
+a generated address is the same as the incoming address, this can lead to
+duplicate addresses with different header modifications. Exim does not do
+duplicate deliveries (except, in certain circumstances, to pipes -- see section
+&<<SECTdupaddr>>&), but it is undefined which of the duplicates is discarded,
+so this ambiguous situation should be avoided. The &%repeat_use%& option of the
+&%redirect%& router may be of help.

 
 

+Unlike the handling of header modifications, any data that was set by the
+&%address_data%& option in the current or previous routers &'is'& passed on to
+subsequent routers.

 
 
 .option user routers string&!! "see below"
 
 
 .option user routers string&!! "see below"


@@ -15996,7 +16430,7 @@ Setting this option has the effect of setting &%verify_sender%& and
 
 .option verify_only routers&!? boolean false
 .cindex "EXPN" "with &%verify_only%&"
 
 .option verify_only routers&!? boolean false
 .cindex "EXPN" "with &%verify_only%&"

-.cindex "&%-bv%& option"
+.oindex "&%-bv%&"

 .cindex "router" "used only when verifying"
 If this option is set, the router is used only when verifying an address or
 testing with the &%-bv%& option, not when actually doing a delivery, testing
 .cindex "router" "used only when verifying"
 If this option is set, the router is used only when verifying an address or
 testing with the &%-bv%& option, not when actually doing a delivery, testing


@@ -16034,7 +16468,7 @@ are evaluated.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "The accept router"
+.chapter "The accept router" "CHID4"

 .cindex "&(accept)& router"
 .cindex "routers" "&(accept)&"
 The &(accept)& router has no private options of its own. Unless it is being
 .cindex "&(accept)& router"
 .cindex "routers" "&(accept)&"
 The &(accept)& router has no private options of its own. Unless it is being


@@ -16089,7 +16523,7 @@ are discarded, together with any other MX records of equal or lower priority.
 
 .cindex "MX record" "pointing to local host"
 .cindex "local host" "MX pointing to"
 
 .cindex "MX record" "pointing to local host"
 .cindex "local host" "MX pointing to"

-.cindex "&%self%& option" "in &(dnslookup)& router"
+.oindex "&%self%&" "in &(dnslookup)& router"

 If the host pointed to by the highest priority MX record, or looked up as an
 address record, is the local host, or matches &%hosts_treat_as_local%&, what
 happens is controlled by the generic &%self%& option.
 If the host pointed to by the highest priority MX record, or looked up as an
 address record, is the local host, or matches &%hosts_treat_as_local%&, what
 happens is controlled by the generic &%self%& option.


@@ -16115,7 +16549,7 @@ case routing fails.
 
 
 
 
 
 

-.section "Private options for dnslookup"
+.section "Private options for dnslookup" "SECID118"

 .cindex "options" "&(dnslookup)& router"
 The private options for the &(dnslookup)& router are as follows:
 
 .cindex "options" "&(dnslookup)& router"
 The private options for the &(dnslookup)& router are as follows:
 


@@ -16169,7 +16603,7 @@ when there is a DNS lookup error.
 .cindex "MX record" "required to exist"
 .cindex "SRV record" "required to exist"
 A domain that matches &%mx_domains%& is required to have either an MX or an SRV
 .cindex "MX record" "required to exist"
 .cindex "SRV record" "required to exist"
 A domain that matches &%mx_domains%& is required to have either an MX or an SRV

-record in order to be recognised. (The name of this option could be improved.)
+record in order to be recognized. (The name of this option could be improved.)

 For example, if all the mail hosts in &'fict.example'& are known to have MX
 records, except for those in &'discworld.fict.example'&, you could use this
 setting:
 For example, if all the mail hosts in &'fict.example'& are known to have MX
 records, except for those in &'discworld.fict.example'&, you could use this
 setting:


@@ -16296,7 +16730,7 @@ the DNS resolver. &%widen_domains%& is not applied to sender addresses
 when verifying, unless &%rewrite_headers%& is false (not the default).
 
 
 when verifying, unless &%rewrite_headers%& is false (not the default).
 
 

-.section "Effect of qualify_single and search_parents"
+.section "Effect of qualify_single and search_parents" "SECID119"

 When a domain from an envelope recipient is changed by the resolver as a result
 of the &%qualify_single%& or &%search_parents%& options, Exim rewrites the
 corresponding address in the message's header lines unless &%rewrite_headers%&
 When a domain from an envelope recipient is changed by the resolver as a result
 of the &%qualify_single%& or &%search_parents%& options, Exim rewrites the
 corresponding address in the message's header lines unless &%rewrite_headers%&


@@ -16324,7 +16758,7 @@ entered. No widening ever takes place for these lookups.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "The ipliteral router"
+.chapter "The ipliteral router" "CHID5"

 .cindex "&(ipliteral)& router"
 .cindex "domain literal" "routing"
 .cindex "routers" "&(ipliteral)&"
 .cindex "&(ipliteral)& router"
 .cindex "domain literal" "routing"
 .cindex "routers" "&(ipliteral)&"


@@ -16345,7 +16779,7 @@ postmaster@[ipv6:fe80::a00:20ff:fe86:a061.5678]
 Exim allows &`ipv4:`& before IPv4 addresses, for consistency, and on the
 grounds that sooner or later somebody will try it.
 
 Exim allows &`ipv4:`& before IPv4 addresses, for consistency, and on the
 grounds that sooner or later somebody will try it.
 

-.cindex "&%self%& option" "in &(ipliteral)& router"
+.oindex "&%self%&" "in &(ipliteral)& router"

 If the IP address matches something in &%ignore_target_hosts%&, the router
 declines. If an IP literal turns out to refer to the local host, the generic
 &%self%& option determines what happens.
 If the IP address matches something in &%ignore_target_hosts%&, the router
 declines. If an IP literal turns out to refer to the local host, the generic
 &%self%& option determines what happens.


@@ -16360,7 +16794,7 @@ Exim will not recognize the domain literal syntax in addresses.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "The iplookup router"
+.chapter "The iplookup router" "CHID6"

 .cindex "&(iplookup)& router"
 .cindex "routers" "&(iplookup)&"
 The &(iplookup)& router was written to fulfil a specific requirement in
 .cindex "&(iplookup)& router"
 .cindex "routers" "&(iplookup)&"
 The &(iplookup)& router was written to fulfil a specific requirement in


@@ -16406,10 +16840,14 @@ This option can be set to &"udp"& or &"tcp"& to specify which of the two
 protocols is to be used.
 
 
 protocols is to be used.
 
 

-.option query iplookup string&!! "&`$local_part@$domain $local_part@$domain`&"
+.option query iplookup string&!! "see below"

 This defines the content of the query that is sent to the remote hosts. The
 This defines the content of the query that is sent to the remote hosts. The

-repetition serves as a way of checking that a response is to the correct query
-in the default case (see &%response_pattern%& below).
+default value is:
+.code
+$local_part@$domain $local_part@$domain
+.endd
+The repetition serves as a way of checking that a response is to the correct
+query in the default case (see &%response_pattern%& below).

 
 
 .option reroute iplookup string&!! unset
 
 
 .option reroute iplookup string&!! unset


@@ -16447,7 +16885,7 @@ call. It does not apply to UDP.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "The manualroute router"
+.chapter "The manualroute router" "CHID7"

 .scindex IIDmanrou1 "&(manualroute)& router"
 .scindex IIDmanrou2 "routers" "&(manualroute)&"
 .cindex "domain" "manually routing"
 .scindex IIDmanrou1 "&(manualroute)& router"
 .scindex IIDmanrou2 "routers" "&(manualroute)&"
 .cindex "domain" "manually routing"


@@ -16466,7 +16904,7 @@ include a transport. The combination of a pattern and its data is called a
 generic &%transport%& option must specify a transport, unless the router is
 being used purely for verification (see &%verify_only%&).
 
 generic &%transport%& option must specify a transport, unless the router is
 being used purely for verification (see &%verify_only%&).
 

-.cindex "&$host$&"
+.vindex "&$host$&"

 In the case of verification, matching the domain pattern is sufficient for the
 router to accept the address. When actually routing an address for delivery,
 an address that matches a domain pattern is queued for the associated
 In the case of verification, matching the domain pattern is sufficient for the
 router to accept the address. When actually routing an address for delivery,
 an address that matches a domain pattern is queued for the associated


@@ -16488,29 +16926,37 @@ below, following the list of private options.
 .cindex "options" "&(manualroute)& router"
 The private options for the &(manualroute)& router are as follows:
 
 .cindex "options" "&(manualroute)& router"
 The private options for the &(manualroute)& router are as follows:
 

+.option host_all_ignored manualroute string defer
+See &%host_find_failed%&.

 
 .option host_find_failed manualroute string freeze
 This option controls what happens when &(manualroute)& tries to find an IP
 address for a host, and the host does not exist. The option can be set to one
 
 .option host_find_failed manualroute string freeze
 This option controls what happens when &(manualroute)& tries to find an IP
 address for a host, and the host does not exist. The option can be set to one

-of
+of the following values:

 .code
 decline
 defer
 fail
 freeze
 .code
 decline
 defer
 fail
 freeze

+ignore

 pass
 .endd
 pass
 .endd

-The default assumes that this state is a serious configuration error. The
-difference between &"pass"& and &"decline"& is that the former forces the
-address to be passed to the next router (or the router defined by
+The default (&"freeze"&) assumes that this state is a serious configuration
+error. The difference between &"pass"& and &"decline"& is that the former
+forces the address to be passed to the next router (or the router defined by

 &%pass_router%&),
 &%pass_router%&),

-.cindex "&%more%& option"
+.oindex "&%more%&"

 overriding &%no_more%&, whereas the latter passes the address to the next
 router only if &%more%& is true.
 
 overriding &%no_more%&, whereas the latter passes the address to the next
 router only if &%more%& is true.
 

-This option applies only to a definite &"does not exist"& state; if a host
-lookup gets a temporary error, delivery is deferred unless the generic
-&%pass_on_timeout%& option is set.
+The value &"ignore"& causes Exim to completely ignore a host whose IP address
+cannot be found. If all the hosts in the list are ignored, the behaviour is
+controlled by the &%host_all_ignored%& option. This takes the same values
+as &%host_find_failed%&, except that it cannot be set to &"ignore"&.
+
+The &%host_find_failed%& option applies only to a definite &"does not exist"&
+state; if a host lookup gets a temporary error, delivery is deferred unless the
+generic &%pass_on_timeout%& option is set.

 
 
 .option hosts_randomize manualroute boolean false
 
 
 .option hosts_randomize manualroute boolean false


@@ -16550,7 +16996,7 @@ router declines. Other kinds of expansion failure cause delivery to be
 deferred.
 
 
 deferred.
 
 

-.option route_list manualroute " "string list" " semicolon-separated""
+.option route_list manualroute "string list" unset

 This string is a list of routing rules, in the form defined below. Note that,
 unlike most string lists, the items are separated by semicolons. This is so
 that they may contain colon-separated host lists.
 This string is a list of routing rules, in the form defined below. Note that,
 unlike most string lists, the items are separated by semicolons. This is so
 that they may contain colon-separated host lists.


@@ -16577,7 +17023,7 @@ if &%headers_add%& and &%headers_remove%& are unset.
 
 
 
 
 
 

-.section "Routing rules in route_list"
+.section "Routing rules in route_list" "SECID120"

 The value of &%route_list%& is a string consisting of a sequence of routing
 rules, separated by semicolons. If a semicolon is needed in a rule, it can be
 entered as two semicolons. Alternatively, the list separator can be changed as
 The value of &%route_list%& is a string consisting of a sequence of routing
 rules, separated by semicolons. If a semicolon is needed in a rule, it can be
 entered as two semicolons. Alternatively, the list separator can be changed as


@@ -16611,7 +17057,7 @@ then used as described below. If there is no match, the router declines. When
 
 
 
 
 
 

-.section "Routing rules in route_data"
+.section "Routing rules in route_data" "SECID121"

 The use of &%route_list%& is convenient when there are only a small number of
 routing rules. For larger numbers, it is easier to use a file or database to
 hold the routing information, and use the &%route_data%& option instead.
 The use of &%route_list%& is convenient when there are only a small number of
 routing rules. For larger numbers, it is easier to use a file or database to
 hold the routing information, and use the &%route_data%& option instead.


@@ -16636,7 +17082,7 @@ be enclosed in quotes if it contains white space.
 
 
 
 
 
 

-.section "Format of the list of hosts"
+.section "Format of the list of hosts" "SECID122"

 A list of hosts, whether obtained via &%route_data%& or &%route_list%&, is
 always separately expanded before use. If the expansion fails, the router
 declines. The result of the expansion must be a colon-separated list of names
 A list of hosts, whether obtained via &%route_data%& or &%route_list%&, is
 always separately expanded before use. If the expansion fails, the router
 declines. The result of the expansion must be a colon-separated list of names


@@ -16660,7 +17106,7 @@ route_list = ^domain(\d+)   host-$1.text.example
 &$1$& is also set when partial matching is done in a file lookup.
 
 .next
 &$1$& is also set when partial matching is done in a file lookup.
 
 .next

-.cindex "&$value$&"
+.vindex "&$value$&"

 If the pattern that matched the domain was a lookup item, the data that was
 looked up is available in the expansion variable &$value$&. For example:
 .code
 If the pattern that matched the domain was a lookup item, the data that was
 looked up is available in the expansion variable &$value$&. For example:
 .code


@@ -16723,7 +17169,7 @@ that is not followed by &`/MX`& it looks up an IP address. If this turns out to
 be an interface on the local host and the item is not the first in the list,
 Exim discards it and any subsequent items. If it is the first item, what
 happens is controlled by the
 be an interface on the local host and the item is not the first in the list,
 Exim discards it and any subsequent items. If it is the first item, what
 happens is controlled by the

-.cindex "&%self%& option" "in &(manualroute)& router"
+.oindex "&%self%&" "in &(manualroute)& router"

 &%self%& option of the router.
 
 A name on the list that is followed by &`/MX`& is replaced with the list of
 &%self%& option of the router.
 
 A name on the list that is followed by &`/MX`& is replaced with the list of


@@ -16802,13 +17248,13 @@ function called.
 If no IP address for a host can be found, what happens is controlled by the
 &%host_find_failed%& option.
 
 If no IP address for a host can be found, what happens is controlled by the
 &%host_find_failed%& option.
 

-.cindex "&$host$&"
+.vindex "&$host$&"

 When an address is routed to a local transport, IP addresses are not looked up.
 The host list is passed to the transport in the &$host$& variable.
 
 
 
 When an address is routed to a local transport, IP addresses are not looked up.
 The host list is passed to the transport in the &$host$& variable.
 
 
 

-.section "Manualroute examples"
+.section "Manualroute examples" "SECID123"

 In some of the examples that follow, the presence of the &%remote_smtp%&
 transport, as defined in the default configuration file, is assumed:
 
 In some of the examples that follow, the presence of the &%remote_smtp%&
 transport, as defined in the default configuration file, is assumed:
 


@@ -16910,8 +17356,8 @@ save_in_file:
       ${lookup{$domain}dbm{/domain2/hosts}{$value}fail} \
       batch_pipe
 .endd
       ${lookup{$domain}dbm{/domain2/hosts}{$value}fail} \
       batch_pipe
 .endd

-.cindex "&$domain$&"
-.cindex "&$host$&"
+.vindex "&$domain$&"
+.vindex "&$host$&"

 The first of these just passes the domain in the &$host$& variable, which
 doesn't achieve much (since it is also in &$domain$&), but the second does a
 file lookup to find a value to pass, causing the router to decline to handle
 The first of these just passes the domain in the &$host$& variable, which
 doesn't achieve much (since it is also in &$domain$&), but the second does a
 file lookup to find a value to pass, causing the router to decline to handle


@@ -17071,7 +17517,7 @@ anything other than HOST_NOT_FOUND, that result is used. Otherwise, Exim
 goes on to try a call to &[getipnodebyname()]& or &[gethostbyname()]&, and the
 result of the lookup is the result of that call.
 
 goes on to try a call to &[getipnodebyname()]& or &[gethostbyname()]&, and the
 result of the lookup is the result of that call.
 

-.cindex "&$address_data$&"
+.vindex "&$address_data$&"

 If the DATA field is set, its value is placed in the &$address_data$&
 variable. For example, this return line
 .code
 If the DATA field is set, its value is placed in the &$address_data$&
 variable. For example, this return line
 .code


@@ -17109,9 +17555,9 @@ It can be routed to be delivered to a specified pipe command.
 .next
 It can cause an automatic reply to be generated.
 .next
 .next
 It can cause an automatic reply to be generated.
 .next

-It can be forced to fail, with a custom error message.
+It can be forced to fail, optionally with a custom error message.

 .next
 .next

-It can be temporarily deferred.
+It can be temporarily deferred, optionally with a custom message.

 .next
 It can be discarded.
 .endlist
 .next
 It can be discarded.
 .endlist


@@ -17123,7 +17569,7 @@ files and pipes, and for generating autoreplies. See the &%file_transport%&,
 
 
 
 
 
 

-.section "Redirection data"
+.section "Redirection data" "SECID124"

 The router operates by interpreting a text string which it obtains either by
 expanding the contents of the &%data%& option, or by reading the entire
 contents of a file whose name is given in the &%file%& option. These two
 The router operates by interpreting a text string which it obtains either by
 expanding the contents of the &%data%& option, or by reading the entire
 contents of a file whose name is given in the &%file%& option. These two


@@ -17156,7 +17602,7 @@ comments.
 
 
 
 
 
 

-.section "Forward files and address verification"
+.section "Forward files and address verification" "SECID125"

 .cindex "address redirection" "while verifying"
 It is usual to set &%no_verify%& on &(redirect)& routers which handle users'
 &_.forward_& files, as in the example above. There are two reasons for this:
 .cindex "address redirection" "while verifying"
 It is usual to set &%no_verify%& on &(redirect)& routers which handle users'
 &_.forward_& files, as in the example above. There are two reasons for this:


@@ -17178,7 +17624,7 @@ saves some resources.
 
 
 
 
 
 

-.section "Interpreting redirection data"
+.section "Interpreting redirection data" "SECID126"

 .cindex "Sieve filter" "specifying in redirection data"
 .cindex "filter" "specifying in redirection data"
 The contents of the data string, whether obtained from &%data%& or &%file%&,
 .cindex "Sieve filter" "specifying in redirection data"
 .cindex "filter" "specifying in redirection data"
 The contents of the data string, whether obtained from &%data%& or &%file%&,


@@ -17226,7 +17672,7 @@ double quotes are retained because some forms of mail address require their use
 &"item"& refers to what remains after any surrounding double quotes have been
 removed.
 
 &"item"& refers to what remains after any surrounding double quotes have been
 removed.
 

-.cindex "&$local_part$&"
+.vindex "&$local_part$&"

 &*Warning*&: If you use an Exim expansion to construct a redirection address,
 and the expansion contains a reference to &$local_part$&, you should make use
 of the &%quote_local_part%& expansion operator, in case the local part contains
 &*Warning*&: If you use an Exim expansion to construct a redirection address,
 and the expansion contains a reference to &$local_part$&, you should make use
 of the &%quote_local_part%& expansion operator, in case the local part contains


@@ -17240,7 +17686,7 @@ data = ${quote_local_part:$local_part}@newdomain.example
 
 .section "Redirecting to a local mailbox" "SECTredlocmai"
 .cindex "routing" "loops in"
 
 .section "Redirecting to a local mailbox" "SECTredlocmai"
 .cindex "routing" "loops in"

-.cindex "loop while routing" "avoidance of"
+.cindex "loop" "while routing, avoidance of"

 .cindex "address redirection" "to local mailbox"
 A redirection item may safely be the same as the address currently under
 consideration. This does not cause a routing loop, because a router is
 .cindex "address redirection" "to local mailbox"
 A redirection item may safely be the same as the address currently under
 consideration. This does not cause a routing loop, because a router is


@@ -17261,7 +17707,7 @@ cleo, cleopatra@egypt.example
 .cindex "backslash in alias file"
 .cindex "alias file" "backslash in"
 For compatibility with other MTAs, such unqualified local parts may be
 .cindex "backslash in alias file"
 .cindex "alias file" "backslash in"
 For compatibility with other MTAs, such unqualified local parts may be

-preceeded by &"\"&, but this is not a requirement for loop prevention. However,
+preceded by &"\"&, but this is not a requirement for loop prevention. However,

 it does make a difference if more than one domain is being handled
 synonymously.
 
 it does make a difference if more than one domain is being handled
 synonymously.
 


@@ -17376,14 +17822,11 @@ Sometimes you want to throw away mail to a particular local part. Making the
 the router to decline. Instead, the alias item
 .cindex "black hole"
 .cindex "abandoning mail"
 the router to decline. Instead, the alias item
 .cindex "black hole"
 .cindex "abandoning mail"

-.code
-:blackhole:
-.endd
-can be used. It does what its name implies. No delivery is done, and no error
-message is generated. This has the same effect as specifing &_/dev/null_&, but
-can be independently disabled.
+&':blackhole:'& can be used. It does what its name implies. No delivery is
+done, and no error message is generated. This has the same effect as specifing
+&_/dev/null_& as a destination, but it can be independently disabled.

 
 

-&*Warning*&: If &`:blackhole:`& appears anywhere in a redirection list, no
+&*Warning*&: If &':blackhole:'& appears anywhere in a redirection list, no

 delivery is done for the original local part, even if other redirection items
 are present. If you are generating a multi-item list (for example, by reading a
 database) and need the ability to provide a no-op item, you must use
 delivery is done for the original local part, even if other redirection items
 are present. If you are generating a multi-item list (for example, by reading a
 database) and need the ability to provide a no-op item, you must use


@@ -17393,7 +17836,7 @@ database) and need the ability to provide a no-op item, you must use
 .cindex "delivery" "forcing failure"
 .cindex "delivery" "forcing deferral"
 .cindex "failing delivery" "forcing"
 .cindex "delivery" "forcing failure"
 .cindex "delivery" "forcing deferral"
 .cindex "failing delivery" "forcing"

-.cindex "deferred delivery" "forcing"
+.cindex "deferred delivery, forcing"

 .cindex "customizing" "failure message"
 An attempt to deliver a particular address can be deferred or forced to fail by
 redirection items of the form
 .cindex "customizing" "failure message"
 An attempt to deliver a particular address can be deferred or forced to fail by
 redirection items of the form


@@ -17410,10 +17853,10 @@ X.Employee:  :fail: Gone away, no forwarding address
 .endd
 In the case of an address that is being verified from an ACL or as the subject
 of a
 .endd
 In the case of an address that is being verified from an ACL or as the subject
 of a

-.cindex "VRFY error text" "display of"
+.cindex "VRFY" "error text, display of"

 VRFY command, the text is included in the SMTP error response by
 default.
 VRFY command, the text is included in the SMTP error response by
 default.

-.cindex "EXPN error text" "display of"
+.cindex "EXPN" "error text, display of"

 The text is not included in the response to an EXPN command. In non-SMTP cases
 the text is included in the error message that Exim generates.
 
 The text is not included in the response to an EXPN command. In non-SMTP cases
 the text is included in the error message that Exim generates.
 


@@ -17428,7 +17871,7 @@ suppress the use of the supplied code in a redirect router by setting the
 &%forbid_smtp_code%& option true. In this case, any SMTP code is quietly
 ignored.
 
 &%forbid_smtp_code%& option true. In this case, any SMTP code is quietly
 ignored.
 

-.cindex "&$acl_verify_message$&"
+.vindex "&$acl_verify_message$&"

 In an ACL, an explicitly provided message overrides the default, but the
 default message is available in the variable &$acl_verify_message$& and can
 therefore be included in a custom message if this is desired.
 In an ACL, an explicitly provided message overrides the default, but the
 default message is available in the variable &$acl_verify_message$& and can
 therefore be included in a custom message if this is desired.


@@ -17451,18 +17894,15 @@ rules still apply.
 Sometimes it is useful to use a single-key search type with a default (see
 chapter &<<CHAPfdlookup>>&) to look up aliases. However, there may be a need
 for exceptions to the default. These can be handled by aliasing them to
 Sometimes it is useful to use a single-key search type with a default (see
 chapter &<<CHAPfdlookup>>&) to look up aliases. However, there may be a need
 for exceptions to the default. These can be handled by aliasing them to

-.code
-:unknown:
-.endd
-This differs from &':fail:'& in that it causes the &(redirect)& router to
-decline, whereas &':fail:'& forces routing to fail. A lookup which results in
-an empty redirection list has the same effect.
+&':unknown:'&. This differs from &':fail:'& in that it causes the &(redirect)&
+router to decline, whereas &':fail:'& forces routing to fail. A lookup which
+results in an empty redirection list has the same effect.

 .endlist
 
 
 .endlist
 
 

-.section "Duplicate addresses"
+.section "Duplicate addresses" "SECTdupaddr"

 .cindex "duplicate addresses"
 .cindex "duplicate addresses"

-.cindex "address duplicate" "discarding"
+.cindex "address duplicate, discarding"

 .cindex "pipe" "duplicated"
 Exim removes duplicate addresses from the list to which it is delivering, so as
 to deliver just one copy to each address. This does not apply to deliveries
 .cindex "pipe" "duplicated"
 Exim removes duplicate addresses from the list to which it is delivering, so as
 to deliver just one copy to each address. This does not apply to deliveries


@@ -17486,7 +17926,7 @@ the pipes are distinct.
 
 
 
 
 
 

-.section "Repeated redirection expansion"
+.section "Repeated redirection expansion" "SECID128"

 .cindex "repeated redirection expansion"
 .cindex "address redirection" "repeated for each delivery attempt"
 When a message cannot be delivered to all of its recipients immediately,
 .cindex "repeated redirection expansion"
 .cindex "address redirection" "repeated for each delivery attempt"
 When a message cannot be delivered to all of its recipients immediately,


@@ -17497,7 +17937,7 @@ members of the list receiving copies of old messages. The &%one_time%& option
 can be used to avoid this.
 
 
 can be used to avoid this.
 
 

-.section "Errors in redirection lists"
+.section "Errors in redirection lists" "SECID129"

 .cindex "address redirection" "errors"
 If &%skip_syntax_errors%& is set, a malformed address that causes a parsing
 error is skipped, and an entry is written to the main log. This may be useful
 .cindex "address redirection" "errors"
 If &%skip_syntax_errors%& is set, a malformed address that causes a parsing
 error is skipped, and an entry is written to the main log. This may be useful


@@ -17507,7 +17947,7 @@ deferred. See also &%syntax_errors_to%&.
 
 
 
 
 
 

-.section "Private options for the redirect router"
+.section "Private options for the redirect router" "SECID130"

 
 .cindex "options" "&(redirect)& router"
 The private options for the &(redirect)& router are as follows:
 
 .cindex "options" "&(redirect)& router"
 The private options for the &(redirect)& router are as follows:


@@ -17644,7 +18084,7 @@ not, the router declines.
 
 
 .option file_transport redirect string&!! unset
 
 
 .option file_transport redirect string&!! unset

-.cindex "&$address_file$&"
+.vindex "&$address_file$&"

 A &(redirect)& router sets up a direct delivery to a file when a path name not
 ending in a slash is specified as a new &"address"&. The transport used is
 specified by this option, which, after expansion, must be the name of a
 A &(redirect)& router sets up a direct delivery to a file when a path name not
 ending in a slash is specified as a new &"address"&. The transport used is
 specified by this option, which, after expansion, must be the name of a


@@ -17863,7 +18303,7 @@ The list is in addition to the local user's primary group when
 
 
 .option pipe_transport redirect string&!! unset
 
 
 .option pipe_transport redirect string&!! unset

-.cindex "&$address_pipe$&"
+.vindex "&$address_pipe$&"

 A &(redirect)& router sets up a direct delivery to a pipe when a string
 starting with a vertical bar character is specified as a new &"address"&. The
 transport used is specified by this option, which, after expansion, must be the
 A &(redirect)& router sets up a direct delivery to a pipe when a string
 starting with a vertical bar character is specified as a new &"address"&. The
 transport used is specified by this option, which, after expansion, must be the


@@ -17872,7 +18312,7 @@ When the transport is run, the pipe command is in &$address_pipe$&.
 
 
 .option qualify_domain redirect string&!! unset
 
 
 .option qualify_domain redirect string&!! unset

-.cindex "&$qualify_recipient$&"
+.vindex "&$qualify_recipient$&"

 If this option is set, and an unqualified address (one without a domain) is
 generated, and that address would normally be qualified by the global setting
 in &%qualify_recipient%&, it is instead qualified with the domain specified by
 If this option is set, and an unqualified address (one without a domain) is
 generated, and that address would normally be qualified by the global setting
 in &%qualify_recipient%&, it is instead qualified with the domain specified by


@@ -18009,6 +18449,13 @@ real_localuser:
   local_part_prefix = real-
   transport = local_delivery
 .endd
   local_part_prefix = real-
   transport = local_delivery
 .endd

+For security, it would probably be a good idea to restrict the use of this
+router to locally-generated messages, using a condition such as this:
+.code
+  condition = ${if match {$sender_host_address}\
+                         {\N^(|127\.0\.0\.1)$\N}}
+.endd
+

 
 .option syntax_errors_text redirect string&!! unset
 See &%skip_syntax_errors%& above.
 
 .option syntax_errors_text redirect string&!! unset
 See &%skip_syntax_errors%& above.


@@ -18050,10 +18497,10 @@ configuration, and these override anything that comes from the router.
 
 
 
 
 
 

-.section "Concurrent deliveries"
+.section "Concurrent deliveries" "SECID131"

 .cindex "concurrent deliveries"
 .cindex "simultaneous deliveries"
 .cindex "concurrent deliveries"
 .cindex "simultaneous deliveries"

-If two different messages for the same local recpient arrive more or less
+If two different messages for the same local recipient arrive more or less

 simultaneously, the two delivery processes are likely to run concurrently. When
 the &(appendfile)& transport is used to write to a file, Exim applies locking
 rules to stop concurrent processes from writing to the same file at the same
 simultaneously, the two delivery processes are likely to run concurrently. When
 the &(appendfile)& transport is used to write to a file, Exim applies locking
 rules to stop concurrent processes from writing to the same file at the same


@@ -18102,7 +18549,7 @@ address by the router. If &%user%& is non-numeric and &%group%& is not set, the
 gid associated with the user is used. If &%user%& is numeric, &%group%& must be
 set.
 
 gid associated with the user is used. If &%user%& is numeric, &%group%& must be
 set.
 

-.cindex "&%initgroups%& option"
+.oindex "&%initgroups%&"

 When the uid is taken from the transport's configuration, the &[initgroups()]&
 function is called for the groups associated with that uid if the
 &%initgroups%& option is set for the transport. When the uid is not specified
 When the uid is taken from the transport's configuration, the &[initgroups()]&
 function is called for the groups associated with that uid if the
 &%initgroups%& option is set for the transport. When the uid is not specified


@@ -18158,7 +18605,7 @@ Of course, an error will still occur if the uid that is chosen is on the
 
 
 
 
 
 

-.section "Current and home directories"
+.section "Current and home directories" "SECID132"

 .cindex "current directory for local transport"
 .cindex "home directory" "for local transport"
 .cindex "transport" "local; home directory for"
 .cindex "current directory for local transport"
 .cindex "home directory" "for local transport"
 .cindex "transport" "local; home directory for"


@@ -18194,10 +18641,10 @@ directory to &_/_& before running a local transport.
 
 
 
 
 
 

-.section "Expansion variables derived from the address"
-.cindex "&$domain$&"
-.cindex "&$local_part$&"
-.cindex "&$original_domain$&"
+.section "Expansion variables derived from the address" "SECID133"
+.vindex "&$domain$&"
+.vindex "&$local_part$&"
+.vindex "&$original_domain$&"

 Normally a local delivery is handling a single address, and in that case the
 variables such as &$domain$& and &$local_part$& are set during local
 deliveries. However, in some circumstances more than one address may be handled
 Normally a local delivery is handling a single address, and in that case the
 variables such as &$domain$& and &$local_part$& are set during local
 deliveries. However, in some circumstances more than one address may be handled


@@ -18358,7 +18805,7 @@ change envelope recipients at this time.
 
 .option home_directory transports string&!! unset
 .cindex "transport" "home directory for"
 
 .option home_directory transports string&!! unset
 .cindex "transport" "home directory for"

-.cindex "&$home$&"
+.vindex "&$home$&"

 This option specifies a home directory setting for a local transport,
 overriding any value that may be set by the router. The home directory is
 placed in &$home$& while expanding the transport's private options. It is also
 This option specifies a home directory setting for a local transport,
 overriding any value that may be set by the router. The home directory is
 placed in &$home$& while expanding the transport's private options. It is also


@@ -18380,7 +18827,7 @@ to ensure that any additional groups associated with the uid are set up.
 
 .option message_size_limit transports string&!! 0
 .cindex "limit" "message size per transport"
 
 .option message_size_limit transports string&!! 0
 .cindex "limit" "message size per transport"

-.cindex "size of message" "limit"
+.cindex "size" "of message, limit"

 .cindex "transport" "message size; limiting"
 This option controls the size of messages passed through the transport. It is
 expanded before use; the result of the expansion must be a sequence of decimal
 .cindex "transport" "message size; limiting"
 This option controls the size of messages passed through the transport. It is
 expanded before use; the result of the expansion must be a sequence of decimal


@@ -18396,8 +18843,8 @@ delivered.
 
 
 .option rcpt_include_affixes transports boolean false
 
 
 .option rcpt_include_affixes transports boolean false

-.cindex "prefix" "for local part; including in envelope"
-.cindex "suffix" "for local part; including in envelope"
+.cindex "prefix" "for local part, including in envelope"
+.cindex "suffix for local part" "including in envelope"

 .cindex "local part" "prefix"
 .cindex "local part" "suffix"
 When this option is false (the default), and an address that has had any
 .cindex "local part" "prefix"
 .cindex "local part" "suffix"
 When this option is false (the default), and an address that has had any


@@ -18454,7 +18901,7 @@ header line, if one is added to the message (see the next option).
 &*Note:*& A changed return path is not logged unless you add
 &%return_path_on_delivery%& to the log selector.
 
 &*Note:*& A changed return path is not logged unless you add
 &%return_path_on_delivery%& to the log selector.
 

-.cindex "&$return_path$&"
+.vindex "&$return_path$&"

 The expansion can refer to the existing value via &$return_path$&. This is
 either the message's envelope sender, or an address set by the
 &%errors_to%& option on a router. If the expansion is forced to fail, no
 The expansion can refer to the existing value via &$return_path$&. This is
 either the message's envelope sender, or an address set by the
 &%errors_to%& option on a router. If the expansion is forced to fail, no


@@ -18514,7 +18961,7 @@ ST=<shadow transport name>
 If the shadow transport did not succeed, the error message is put in
 parentheses afterwards. Shadow transports can be used for a number of different
 purposes, including keeping more detailed log information than Exim normally
 If the shadow transport did not succeed, the error message is put in
 parentheses afterwards. Shadow transports can be used for a number of different
 purposes, including keeping more detailed log information than Exim normally

-provides, and implementing automatic acknowledgement policies based on message
+provides, and implementing automatic acknowledgment policies based on message

 headers that some sites insist on.
 
 
 headers that some sites insist on.
 
 


@@ -18567,7 +19014,7 @@ more, the server might reject the message. This can be worked round by setting
 the &%size_addition%& option on the &(smtp)& transport, either to allow for
 additions to the message, or to disable the use of SIZE altogether.
 
 the &%size_addition%& option on the &(smtp)& transport, either to allow for
 additions to the message, or to disable the use of SIZE altogether.
 

-.cindex "&$pipe_addresses$&"
+.vindex "&$pipe_addresses$&"

 The value of the &%transport_filter%& option is the command string for starting
 the filter, which is run directly from Exim, not under a shell. The string is
 parsed by Exim in the same way as a command string for the &(pipe)& transport:
 The value of the &%transport_filter%& option is the command string for starting
 the filter, which is run directly from Exim, not under a shell. The string is
 parsed by Exim in the same way as a command string for the &(pipe)& transport:


@@ -18578,8 +19025,8 @@ of arguments, one for each address that applies to this delivery. (This isn't
 an ideal name for this feature here, but as it was already implemented for the
 &(pipe)& transport, it seemed sensible not to change it.)
 
 an ideal name for this feature here, but as it was already implemented for the
 &(pipe)& transport, it seemed sensible not to change it.)
 

-.cindex "&$host$&"
-.cindex "&$host_address$&"
+.vindex "&$host$&"
+.vindex "&$host_address$&"

 The expansion variables &$host$& and &$host_address$& are available when the
 transport is a remote one. They contain the name and IP address of the host to
 which the message is being sent. For example:
 The expansion variables &$host$& and &$host_address$& are available when the
 transport is a remote one. They contain the name and IP address of the host to
 which the message is being sent. For example:


@@ -18610,13 +19057,13 @@ Except for the special case of &$pipe_addresses$& that is mentioned above, an
 expansion cannot generate multiple arguments, or a command name followed by
 arguments. Consider this example:
 .code
 expansion cannot generate multiple arguments, or a command name followed by
 arguments. Consider this example:
 .code

-transport_filter = ${lookup{$host}lsearch{/some/file}\
+transport_filter = ${lookup{$host}lsearch{/a/file}\

                     {$value}{/bin/cat}}
 .endd
 The result of the lookup is interpreted as the name of the command, even
 if it contains white space. The simplest way round this is to use a shell:
 .code
                     {$value}{/bin/cat}}
 .endd
 The result of the lookup is interpreted as the name of the command, even
 if it contains white space. The simplest way round this is to use a shell:
 .code

-transport_filter = /bin/sh -c ${lookup{$host}lsearch{/some/file}\
+transport_filter = /bin/sh -c ${lookup{$host}lsearch{/a/file}\

                                {$value}{/bin/cat}}
 .endd
 .endlist
                                {$value}{/bin/cat}}
 .endd
 .endlist


@@ -18635,7 +19082,7 @@ message, which happens if the &%return_message%& option is set.
 
 
 .option transport_filter_timeout transports time 5m
 
 
 .option transport_filter_timeout transports time 5m

-.cindex "transport filter" "timeout"
+.cindex "transport" "filter, timeout"

 When Exim is reading the output of a transport filter, it a applies a timeout
 that can be set by this option. Exceeding the timeout is normally treated as a
 temporary delivery failure. However, if a transport filter is used with a
 When Exim is reading the output of a transport filter, it a applies a timeout
 that can be set by this option. Exceeding the timeout is normally treated as a
 temporary delivery failure. However, if a transport filter is used with a


@@ -18647,7 +19094,7 @@ becomes a temporary error.
 
 .option user transports string&!! "Exim user"
 .cindex "uid (user id)" "local delivery"
 
 .option user transports string&!! "Exim user"
 .cindex "uid (user id)" "local delivery"

-.cindex "transport user" "specifying"
+.cindex "transport" "user, specifying"

 This option specifies the user under whose uid the delivery process is to be
 run, overriding any uid that may have been set by the router. If the user is
 given as a name, the uid is looked up from the password data, and the
 This option specifies the user under whose uid the delivery process is to be
 run, overriding any uid that may have been set by the router. If the user is
 given as a name, the uid is looked up from the password data, and the


@@ -18686,8 +19133,8 @@ transport is run for each address that is routed to the transport. A separate
 copy of the message is delivered each time.
 
 .cindex "batched local delivery"
 copy of the message is delivered each time.
 
 .cindex "batched local delivery"

-.cindex "&%batch_max%&"
-.cindex "&%batch_id%&"
+.oindex "&%batch_max%&"
+.oindex "&%batch_id%&"

 In special cases, it may be desirable to handle several addresses at once in a
 local transport, for example:
 
 In special cases, it may be desirable to handle several addresses at once in a
 local transport, for example:
 


@@ -18717,11 +19164,11 @@ delivered together in a single run of the transport. Its default value is one
 to certain conditions:
 
 .ilist
 to certain conditions:
 
 .ilist

-.cindex "&$local_part$&"
+.vindex "&$local_part$&"

 If any of the transport's options contain a reference to &$local_part$&, no
 batching is possible.
 .next
 If any of the transport's options contain a reference to &$local_part$&, no
 batching is possible.
 .next

-.cindex "&$domain$&"
+.vindex "&$domain$&"

 If any of the transport's options contain a reference to &$domain$&, only
 addresses with the same domain are batched.
 .next
 If any of the transport's options contain a reference to &$domain$&, only
 addresses with the same domain are batched.
 .next


@@ -18761,14 +19208,14 @@ transport without &%use_bsmtp%&, the only way to preserve the recipient
 addresses is to set the &%envelope_to_add%& option.
 
 .cindex "&(pipe)& transport" "with multiple addresses"
 addresses is to set the &%envelope_to_add%& option.
 
 .cindex "&(pipe)& transport" "with multiple addresses"

-.cindex "&$pipe_addresses$&"
+.vindex "&$pipe_addresses$&"

 If you are using a &(pipe)& transport without BSMTP, and setting the
 transport's &%command%& option, you can include &$pipe_addresses$& as part of
 the command. This is not a true variable; it is a bit of magic that causes each
 of the recipient addresses to be inserted into the command as a separate
 argument. This provides a way of accessing all the addresses that are being
 delivered in the batch. &*Note:*& This is not possible for pipe commands that
 If you are using a &(pipe)& transport without BSMTP, and setting the
 transport's &%command%& option, you can include &$pipe_addresses$& as part of
 the command. This is not a true variable; it is a bit of magic that causes each
 of the recipient addresses to be inserted into the command as a separate
 argument. This provides a way of accessing all the addresses that are being
 delivered in the batch. &*Note:*& This is not possible for pipe commands that

-are specififed by a &(redirect)& router.
+are specified by a &(redirect)& router.

 
 
 
 
 
 


@@ -18798,7 +19245,7 @@ SUPPORT_MAILSTORE in &_Local/Makefile_& to have the appropriate code
 included.
 
 .cindex "quota" "system"
 included.
 
 .cindex "quota" "system"

-Exim recognises system quota errors, and generates an appropriate message. Exim
+Exim recognizes system quota errors, and generates an appropriate message. Exim

 also supports its own quota control within the transport, for use when the
 system facility is unavailable or cannot be used for some reason.
 
 also supports its own quota control within the transport, for use when the
 system facility is unavailable or cannot be used for some reason.
 


@@ -18825,8 +19272,8 @@ the &%directory%& option specifies a directory, in which a new file containing
 the message is created. Only one of these two options can be set, and for
 normal deliveries to mailboxes, one of them &'must'& be set.
 
 the message is created. Only one of these two options can be set, and for
 normal deliveries to mailboxes, one of them &'must'& be set.
 

-.cindex "&$address_file$&"
-.cindex "&$local_part$&"
+.vindex "&$address_file$&"
+.vindex "&$local_part$&"

 However, &(appendfile)& is also used for delivering messages to files or
 directories whose names (or parts of names) are obtained from alias,
 forwarding, or filtering operations (for example, a &%save%& command in a
 However, &(appendfile)& is also used for delivering messages to files or
 directories whose names (or parts of names) are obtained from alias,
 forwarding, or filtering operations (for example, a &%save%& command in a


@@ -18894,7 +19341,7 @@ the &%file%& or &%directory%& option is still used if it is set.
 
 
 
 
 
 

-.section "Private options for appendfile"
+.section "Private options for appendfile" "SECID134"

 .cindex "options" "&(appendfile)& transport"
 
 
 .cindex "options" "&(appendfile)& transport"
 
 


@@ -19010,14 +19457,18 @@ appended to a single mailbox file. A number of different formats are provided
 &<<SECTopdir>>& for further details of this form of delivery.
 
 
 &<<SECTopdir>>& for further details of this form of delivery.
 
 

-.option directory_file appendfile string&!! &`q${base62:$tod_epoch}-$inode`&
+.option directory_file appendfile string&!! "see below"

 .cindex "base62"
 .cindex "base62"

-.cindex "&$inode$&"
+.vindex "&$inode$&"

 When &%directory%& is set, but neither &%maildir_format%& nor
 &%mailstore_format%& is set, &(appendfile)& delivers each message into a file
 When &%directory%& is set, but neither &%maildir_format%& nor
 &%mailstore_format%& is set, &(appendfile)& delivers each message into a file

-whose name is obtained by expanding this string. The default value generates a
-unique name from the current time, in base 62 form, and the inode of the file.
-The variable &$inode$& is available only when expanding this option.
+whose name is obtained by expanding this string. The default value is:
+.code
+q${base62:$tod_epoch}-$inode
+.endd
+This generates a unique name from the current time, in base 62 form, and the
+inode of the file. The variable &$inode$& is available only when expanding this
+option.

 
 
 .option directory_mode appendfile "octal integer" 0700
 
 
 .option directory_mode appendfile "octal integer" 0700


@@ -19091,7 +19542,7 @@ If this option is false, the file is created if it does not exist.
 
 .option lock_fcntl_timeout appendfile time 0s
 .cindex "timeout" "mailbox locking"
 
 .option lock_fcntl_timeout appendfile time 0s
 .cindex "timeout" "mailbox locking"

-.cindex "mailbox locking" "blocking and non-blocking"
+.cindex "mailbox" "locking, blocking and non-blocking"

 .cindex "locking files"
 By default, the &(appendfile)& transport uses non-blocking calls to &[fcntl()]&
 when locking an open mailbox file. If the call fails, the delivery process
 .cindex "locking files"
 By default, the &(appendfile)& transport uses non-blocking calls to &[fcntl()]&
 when locking an open mailbox file. If the call fails, the delivery process


@@ -19258,7 +19709,7 @@ section &<<SECTopdir>>& below.
 .cindex "locking files"
 .cindex "file" "locking"
 .cindex "file" "MBX format"
 .cindex "locking files"
 .cindex "file" "locking"
 .cindex "file" "MBX format"

-.cindex "MBX format" "specifying"
+.cindex "MBX format, specifying"

 This option is available only if Exim has been compiled with SUPPORT_MBX
 set in &_Local/Makefile_&. If &%mbx_format%& is set with the &%file%& option,
 the message is appended to the mailbox file in MBX format instead of
 This option is available only if Exim has been compiled with SUPPORT_MBX
 set in &_Local/Makefile_&. If &%mbx_format%& is set with the &%file%& option,
 the message is appended to the mailbox file in MBX format instead of


@@ -19298,7 +19749,8 @@ in which case it is:
 message_prefix = "From ${if def:return_path{$return_path}\
   {MAILER-DAEMON}} $tod_bsdinbox\n"
 .endd
 message_prefix = "From ${if def:return_path{$return_path}\
   {MAILER-DAEMON}} $tod_bsdinbox\n"
 .endd

-
+&*Note:*& If you set &%use_crlf%& true, you must change any occurrences of
+&`\n`& to &`\r\n`& in &%message_prefix%&.

 
 .option message_suffix appendfile string&!! "see below"
 The string specified here is expanded and output at the end of every message.
 
 .option message_suffix appendfile string&!! "see below"
 The string specified here is expanded and output at the end of every message.


@@ -19308,12 +19760,14 @@ setting
 .code
 message_suffix =
 .endd
 .code
 message_suffix =
 .endd

+&*Note:*& If you set &%use_crlf%& true, you must change any occurrences of
+&`\n`& to &`\r\n`& in &%message_suffix%&.

 
 .option mode appendfile "octal integer" 0600
 If the output file is created, it is given this mode. If it already exists and
 has wider permissions, they are reduced to this mode. If it has narrower
 permissions, an error occurs unless &%mode_fail_narrower%& is false. However,
 
 .option mode appendfile "octal integer" 0600
 If the output file is created, it is given this mode. If it already exists and
 has wider permissions, they are reduced to this mode. If it has narrower
 permissions, an error occurs unless &%mode_fail_narrower%& is false. However,

-if the delivery is the result of a &%save%& command in a filter file specifing
+if the delivery is the result of a &%save%& command in a filter file specifying

 a particular mode, the mode of the output file is always forced to take that
 value, and this option is ignored.
 
 a particular mode, the mode of the output file is always forced to take that
 value, and this option is ignored.
 


@@ -19489,11 +19943,12 @@ This option causes lines to be terminated with the two-character CRLF sequence
 of batched SMTP, the byte sequence written to the file is then an exact image
 of what would be sent down a real SMTP connection.
 
 of batched SMTP, the byte sequence written to the file is then an exact image
 of what would be sent down a real SMTP connection.
 

-The contents of the &%message_prefix%& and &%message_suffix%& options are
-written verbatim, so must contain their own carriage return characters if these
-are needed. In cases where these options have non-empty defaults, the values
-end with a single linefeed, so they must be changed to end with &`\r\n`& if
-&%use_crlf%& is set.
+&*Note:*& The contents of the &%message_prefix%& and &%message_suffix%& options
+(which are used to supply the traditional &"From&~"& and blank line separators
+in Berkeley-style mailboxes) are written verbatim, so must contain their own
+carriage return characters if these are needed. In cases where these options
+have non-empty defaults, the values end with a single linefeed, so they must be
+changed to end with &`\r\n`& if &%use_crlf%& is set.

 
 
 .option use_fcntl_lock appendfile boolean "see below"
 
 
 .option use_fcntl_lock appendfile boolean "see below"


@@ -19826,14 +20281,14 @@ of the &%mailbox_size%& option as a way of importing it into Exim.
 
 
 
 
 
 

-.section "Using tags to record message sizes"
+.section "Using tags to record message sizes" "SECID135"

 If &%maildir_tag%& is set, the string is expanded for each delivery.
 When the maildir file is renamed into the &_new_& sub-directory, the
 tag is added to its name. However, if adding the tag takes the length of the
 name to the point where the test &[stat()]& call fails with ENAMETOOLONG,
 the tag is dropped and the maildir file is created with no tag.
 
 If &%maildir_tag%& is set, the string is expanded for each delivery.
 When the maildir file is renamed into the &_new_& sub-directory, the
 tag is added to its name. However, if adding the tag takes the length of the
 name to the point where the test &[stat()]& call fails with ENAMETOOLONG,
 the tag is dropped and the maildir file is created with no tag.
 

-.cindex "&$message_size$&"
+.vindex "&$message_size$&"

 Tags can be used to encode the size of files in their names; see
 &%quota_size_regex%& above for an example. The expansion of &%maildir_tag%&
 happens after the message has been written. The value of the &$message_size$&
 Tags can be used to encode the size of files in their names; see
 &%quota_size_regex%& above for an example. The expansion of &%maildir_tag%&
 happens after the message has been written. The value of the &$message_size$&


@@ -19846,7 +20301,7 @@ colon is inserted.
 
 
 
 
 
 

-.section "Using a maildirsize file"
+.section "Using a maildirsize file" "SECID136"

 .cindex "quota" "in maildir delivery"
 .cindex "maildir format" "&_maildirsize_& file"
 If &%maildir_use_size_file%& is true, Exim implements the maildir++ rules for
 .cindex "quota" "in maildir delivery"
 .cindex "maildir format" "&_maildirsize_& file"
 If &%maildir_use_size_file%& is true, Exim implements the maildir++ rules for


@@ -19872,7 +20327,7 @@ See the description of the &%maildir_quota_directory_regex%& option above for
 details.
 
 
 details.
 
 

-.section "Mailstore delivery"
+.section "Mailstore delivery" "SECID137"

 .cindex "mailstore format" "description of"
 If the &%mailstore_format%& option is true, each message is written as two
 files in the given directory. A unique base name is constructed from the
 .cindex "mailstore format" "description of"
 If the &%mailstore_format%& option is true, each message is written as two
 files in the given directory. A unique base name is constructed from the


@@ -19901,7 +20356,7 @@ configuration errors, and delivery is deferred. The variable
 &$mailstore_basename$& is available for use during these expansions.
 
 
 &$mailstore_basename$& is available for use during these expansions.
 
 

-.section "Non-special new file delivery"
+.section "Non-special new file delivery" "SECID138"

 If neither &%maildir_format%& nor &%mailstore_format%& is set, a single new
 file is created directly in the named directory. For example, when delivering
 messages into files in batched SMTP format for later delivery to some host (see
 If neither &%maildir_format%& nor &%mailstore_format%& is set, a single new
 file is created directly in the named directory. For example, when delivering
 messages into files in batched SMTP format for later delivery to some host (see


@@ -19923,7 +20378,7 @@ expanding the contents of the &%directory_file%& option.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "The autoreply transport"
+.chapter "The autoreply transport" "CHID8"

 .scindex IIDauttra1 "transports" "&(autoreply)&"
 .scindex IIDauttra2 "&(autoreply)& transport"
 The &(autoreply)& transport is not a true transport in that it does not cause
 .scindex IIDauttra1 "transports" "&(autoreply)&"
 .scindex IIDauttra2 "&(autoreply)& transport"
 The &(autoreply)& transport is not a true transport in that it does not cause


@@ -19982,7 +20437,7 @@ If any of the generic options for manipulating headers (for example,
 of the original message that is included in the generated message when
 &%return_message%& is set. They do not apply to the generated message itself.
 
 of the original message that is included in the generated message when
 &%return_message%& is set. They do not apply to the generated message itself.
 

-.cindex "&$sender_address$&"
+.vindex "&$sender_address$&"

 If the &(autoreply)& transport receives return code 2 from Exim when it submits
 the message, indicating that there were no recipients, it does not treat this
 as an error. This means that autoreplies sent to &$sender_address$& when this
 If the &(autoreply)& transport receives return code 2 from Exim when it submits
 the message, indicating that there were no recipients, it does not treat this
 as an error. This means that autoreplies sent to &$sender_address$& when this


@@ -19991,7 +20446,7 @@ problems. They are just discarded.
 
 
 
 
 
 

-.section "Private options for autoreply"
+.section "Private options for autoreply" "SECID139"

 .cindex "options" "&(autoreply)& transport"
 
 .option bcc autoreply string&!! unset
 .cindex "options" "&(autoreply)& transport"
 
 .option bcc autoreply string&!! unset


@@ -20183,12 +20638,10 @@ delivers the message to it using the LMTP protocol.
 
 
 .option timeout lmtp time 5m
 
 
 .option timeout lmtp time 5m

-The transport is aborted if the created process
-or Unix domain socket
-does not respond to LMTP commands or message input within this timeout.
-
-
-Here is an example of a typical LMTP transport:
+The transport is aborted if the created process or Unix domain socket does not
+respond to LMTP commands or message input within this timeout. &new("Delivery
+is deferred, and will be tried again later.") Here is an example of a typical
+LMTP transport:

 .code
 lmtp:
   driver = lmtp
 .code
 lmtp:
   driver = lmtp


@@ -20215,13 +20668,13 @@ their incoming messages. The &(pipe)& transport can be used in one of the
 following ways:
 
 .ilist
 following ways:
 
 .ilist

-.cindex "&$local_part$&"
+.vindex "&$local_part$&"

 A router routes one address to a transport in the normal way, and the
 transport is configured as a &(pipe)& transport. In this case, &$local_part$&
 contains the local part of the address (as usual), and the command that is run
 is specified by the &%command%& option on the transport.
 .next
 A router routes one address to a transport in the normal way, and the
 transport is configured as a &(pipe)& transport. In this case, &$local_part$&
 contains the local part of the address (as usual), and the command that is run
 is specified by the &%command%& option on the transport.
 .next

-.cindex "&$pipe_addresses$&"
+.vindex "&$pipe_addresses$&"

 If the &%batch_max%& option is set greater than 1 (the default is 1), the
 transport can handle more than one address in a single run. In this case, when
 more than one address is routed to the transport, &$local_part$& is not set
 If the &%batch_max%& option is set greater than 1 (the default is 1), the
 transport can handle more than one address in a single run. In this case, when
 more than one address is routed to the transport, &$local_part$& is not set


@@ -20229,7 +20682,7 @@ more than one address is routed to the transport, &$local_part$& is not set
 (described in section &<<SECThowcommandrun>>& below) contains all the addresses
 that are routed to the transport.
 .next
 (described in section &<<SECThowcommandrun>>& below) contains all the addresses
 that are routed to the transport.
 .next

-.cindex "&$address_pipe$&"
+.vindex "&$address_pipe$&"

 A router redirects an address directly to a pipe command (for example, from an
 alias or forward file). In this case, &$address_pipe$& contains the text of the
 pipe command, and the &%command%& option on the transport is ignored. If only
 A router redirects an address directly to a pipe command (for example, from an
 alias or forward file). In this case, &$address_pipe$& contains the text of the
 pipe command, and the &%command%& option on the transport is ignored. If only


@@ -20252,7 +20705,7 @@ details of the local delivery environment and chapter &<<CHAPbatching>>&
 for a discussion of local delivery batching.
 
 
 for a discussion of local delivery batching.
 
 

-.section "Concurrent delivery"
+.section "Concurrent delivery" "SECID140"

 If two messages arrive at almost the same time, and both are routed to a pipe
 delivery, the two pipe transports may be run concurrently. You must ensure that
 any pipe commands you set up are robust against this happening. If the commands
 If two messages arrive at almost the same time, and both are routed to a pipe
 delivery, the two pipe transports may be run concurrently. You must ensure that
 any pipe commands you set up are robust against this happening. If the commands


@@ -20261,7 +20714,7 @@ write to a file, the &%exim_lock%& utility might be of use.
 
 
 
 
 
 

-.section "Returned status and data"
+.section "Returned status and data" "SECID141"

 .cindex "&(pipe)& transport" "returned data"
 If the command exits with a non-zero return code, the delivery is deemed to
 have failed, unless either the &%ignore_status%& option is set (in which case
 .cindex "&(pipe)& transport" "returned data"
 If the command exits with a non-zero return code, the delivery is deemed to
 have failed, unless either the &%ignore_status%& option is set (in which case


@@ -20329,7 +20782,7 @@ command = /bin/sh -c ${lookup{$local_part}lsearch{/some/file}}
 
 .cindex "transport" "filter"
 .cindex "filter" "transport filter"
 
 .cindex "transport" "filter"
 .cindex "filter" "transport filter"

-.cindex "&$pipe_addresses$&"
+.vindex "&$pipe_addresses$&"

 Special handling takes place when an argument consists of precisely the text
 &`$pipe_addresses`&. This is not a general expansion variable; the only
 place this string is recognized is when it appears as an argument for a pipe or
 Special handling takes place when an argument consists of precisely the text
 &`$pipe_addresses`&. This is not a general expansion variable; the only
 place this string is recognized is when it appears as an argument for a pipe or


@@ -20405,7 +20858,7 @@ by the router's &%transport_home_directory%& option, which defaults to the
 user's home directory if &%check_local_user%& is set.
 
 
 user's home directory if &%check_local_user%& is set.
 
 

-.section "Private options for pipe"
+.section "Private options for pipe" "SECID142"

 .cindex "options" "&(pipe)& transport"
 
 
 .cindex "options" "&(pipe)& transport"
 
 


@@ -20543,6 +20996,9 @@ setting
 .code
 message_prefix =
 .endd
 .code
 message_prefix =
 .endd

+&*Note:*& If you set &%use_crlf%& true, you must change any occurrences of
+&`\n`& to &`\r\n`& in &%message_prefix%&.
+

 
 .option message_suffix pipe string&!! "see below"
 The string specified here is expanded and output at the end of every message.
 
 .option message_suffix pipe string&!! "see below"
 The string specified here is expanded and output at the end of every message.


@@ -20551,13 +21007,19 @@ The suffix can be suppressed by setting
 .code
 message_suffix =
 .endd
 .code
 message_suffix =
 .endd

+&*Note:*& If you set &%use_crlf%& true, you must change any occurrences of
+&`\n`& to &`\r\n`& in &%message_suffix%&.
+

 
 

-.option path pipe string &`/bin:/usr/bin`&
+.option path pipe string "see below"

 This option specifies the string that is set up in the PATH environment
 This option specifies the string that is set up in the PATH environment

-variable of the subprocess. If the &%command%& option does not yield an
-absolute path name, the command is sought in the PATH directories, in the usual
-way. &*Warning*&: This does not apply to a command specified as a transport
-filter.
+variable of the subprocess. The default is:
+.code
+/bin:/usr/bin
+.endd
+If the &%command%& option does not yield an absolute path name, the command is
+sought in the PATH directories, in the usual way. &*Warning*&: This does not
+apply to a command specified as a transport filter.

 
 
 .option pipe_as_creator pipe boolean false
 
 
 .option pipe_as_creator pipe boolean false


@@ -20658,13 +21120,13 @@ of what would be sent down a real SMTP connection.
 
 The contents of the &%message_prefix%& and &%message_suffix%& options are
 written verbatim, so must contain their own carriage return characters if these
 
 The contents of the &%message_prefix%& and &%message_suffix%& options are
 written verbatim, so must contain their own carriage return characters if these

-are needed. Since the default values for both &%message_prefix%& and
-&%message_suffix%& end with a single linefeed, their values must be changed to
-end with &`\r\n`& if &%use_crlf%& is set.
+are needed. When &%use_bsmtp%& is not set, the default values for both
+&%message_prefix%& and &%message_suffix%& end with a single linefeed, so their
+values must be changed to end with &`\r\n`& if &%use_crlf%& is set.

 
 
 .option use_shell pipe boolean false
 
 
 .option use_shell pipe boolean false

-.cindex "&$pipe_addresses$&"
+.vindex "&$pipe_addresses$&"

 If this option is set, it causes the command to be passed to &_/bin/sh_&
 instead of being run directly from the transport, as described in section
 &<<SECThowcommandrun>>&. This is less secure, but is needed in some situations
 If this option is set, it causes the command to be passed to &_/bin/sh_&
 instead of being run directly from the transport, as described in section
 &<<SECThowcommandrun>>&. This is less secure, but is needed in some situations


@@ -20676,7 +21138,7 @@ its &%-c%& option.
 
 
 
 
 
 

-.section "Using an external local delivery agent"
+.section "Using an external local delivery agent" "SECID143"

 .cindex "local delivery" "using an external agent"
 .cindex "&'procmail'&"
 .cindex "external local delivery"
 .cindex "local delivery" "using an external agent"
 .cindex "&'procmail'&"
 .cindex "external local delivery"


@@ -20766,7 +21228,7 @@ explicitly for the transport. Timeout and retry processing (see chapter
 &<<CHAPretry>>&) is applied to each IP address independently.
 
 
 &<<CHAPretry>>&) is applied to each IP address independently.
 
 

-.section "Multiple messages on a single connection"
+.section "Multiple messages on a single connection" "SECID144"

 The sending of multiple messages over a single TCP/IP connection can arise in
 two ways:
 
 The sending of multiple messages over a single TCP/IP connection can arise in
 two ways:
 


@@ -20795,9 +21257,9 @@ no further messages are sent over that connection.
 
 
 
 
 
 

-.section "Use of the $host variable"
-.cindex "&$host$&"
-.cindex "&$host_address$&"
+.section "Use of the $host and $host_address variables" "SECID145"
+.vindex "&$host$&"
+.vindex "&$host_address$&"

 At the start of a run of the &(smtp)& transport, the values of &$host$& and
 &$host_address$& are the name and IP address of the first host on the host list
 passed by the router. However, when the transport is about to connect to a
 At the start of a run of the &(smtp)& transport, the values of &$host$& and
 &$host_address$& are the name and IP address of the first host on the host list
 passed by the router. However, when the transport is about to connect to a


@@ -20807,13 +21269,24 @@ that are in force when the &%helo_data%&, &%hosts_try_auth%&, &%interface%&,
 &%serialize_hosts%&, and the various TLS options are expanded.
 
 
 &%serialize_hosts%&, and the various TLS options are expanded.
 
 

+.section "Use of $tls_cipher and $tls_peerdn" "usecippeer"
+.vindex &$tls_cipher$&
+.vindex &$tls_peerdn$&
+At the start of a run of the &(smtp)& transport, the values of &$tls_cipher$&
+and &$tls_peerdn$& are the values that were set when the message was received.
+These are the values that are used for options that are expanded before any
+SMTP connections are made. Just before each connection is made, these two
+variables are emptied. If TLS is subsequently started, they are set to the
+appropriate values for the outgoing connection, and these are the values that
+are in force when any authenticators are run and when the
+&%authenticated_sender%& option is expanded.
+

 
 

-.section "Private options for smtp"
+.section "Private options for smtp" "SECID146"

 .cindex "options" "&(smtp)& transport"
 The private options of the &(smtp)& transport are as follows:
 
 
 .cindex "options" "&(smtp)& transport"
 The private options of the &(smtp)& transport are as follows:
 
 

-.new

 .option address_retry_include_sender smtp boolean true
 .cindex "4&'xx'& responses" "retrying after"
 When an address is delayed because of a 4&'xx'& response to a RCPT command, it
 .option address_retry_include_sender smtp boolean true
 .cindex "4&'xx'& responses" "retrying after"
 When an address is delayed because of a 4&'xx'& response to a RCPT command, it


@@ -20822,7 +21295,6 @@ runs until the retry time is reached. You can delay the recipient without
 reference to the sender (which is what earlier versions of Exim did), by
 setting &%address_retry_include_sender%& false. However, this can lead to
 problems with servers that regularly issue 4&'xx'& responses to RCPT commands.
 reference to the sender (which is what earlier versions of Exim did), by
 setting &%address_retry_include_sender%& false. However, this can lead to
 problems with servers that regularly issue 4&'xx'& responses to RCPT commands.

-.wen

 
 .option allow_localhost smtp boolean false
 .cindex "local host" "sending to"
 
 .option allow_localhost smtp boolean false
 .cindex "local host" "sending to"


@@ -20844,6 +21316,11 @@ forced to fail, the option is ignored. Other expansion failures cause delivery
 to be deferred. If the result of expansion is an empty string, that is also
 ignored.
 
 to be deferred. If the result of expansion is an empty string, that is also
 ignored.
 

+The expansion happens after the outgoing connection has been made and TLS
+started, if required. This means that the &$host$&, &$host_address$&,
+&$tls_cipher$&, and &$tls_peerdn$& variables are set according to the
+particular connection.
+

 If the SMTP session is not authenticated, the expansion of
 &%authenticated_sender%& still happens (and can cause the delivery to be
 deferred if it fails), but no AUTH= item is added to MAIL commands
 If the SMTP session is not authenticated, the expansion of
 &%authenticated_sender%& still happens (and can cause the delivery to be
 deferred if it fails), but no AUTH= item is added to MAIL commands


@@ -20931,7 +21408,6 @@ in chapter &<<CHAPdnslookup>>& for more details.
 
 
 .option dns_search_parents smtp boolean false
 
 
 .option dns_search_parents smtp boolean false

-.cindex "&%search_parents%&"

 If the &%hosts%& or &%fallback_hosts%& option is being used, and the
 &%gethostbyname%& option is false, the RES_DNSRCH resolver option is set.
 See the &%search_parents%& option in chapter &<<CHAPdnslookup>>& for more
 If the &%hosts%& or &%fallback_hosts%& option is being used, and the
 &%gethostbyname%& option is false, the RES_DNSRCH resolver option is set.
 See the &%search_parents%& option in chapter &<<CHAPdnslookup>>& for more


@@ -20978,7 +21454,6 @@ This is the timeout that applies while waiting for the response to the final
 line containing just &"."& that terminates a message. Its value must not be
 zero.
 
 line containing just &"."& that terminates a message. Its value must not be
 zero.
 

-

 .option gethostbyname smtp boolean false
 If this option is true when the &%hosts%& and/or &%fallback_hosts%& options are
 being used, names are looked up using &[gethostbyname()]&
 .option gethostbyname smtp boolean false
 If this option is true when the &%hosts%& and/or &%fallback_hosts%& options are
 being used, names are looked up using &[gethostbyname()]&


@@ -20986,14 +21461,42 @@ being used, names are looked up using &[gethostbyname()]&
 instead of using the DNS. Of course, that function may in fact use the DNS, but
 it may also consult other sources of information such as &_/etc/hosts_&.
 
 instead of using the DNS. Of course, that function may in fact use the DNS, but
 it may also consult other sources of information such as &_/etc/hosts_&.
 

-.option helo_data smtp string&!! &`$primary_hostname`&
-.cindex "HELO argument" "setting"
-.cindex "EHLO argument" "setting"
-.cindex "LHLO argument" "setting"
-The value of this option is expanded, and used as the argument for the EHLO,
-HELO, or LHLO command that starts the outgoing SMTP or LMTP session. The
-variables &$host$& and &$host_address$& are set to the identity of the remote
-host, and can be used to generate different values for different servers.
+.option gnutls_require_kx main string unset
+This option controls the key exchange mechanisms when GnuTLS is used in an Exim
+client. For details, see section &<<SECTreqciphgnu>>&.
+
+.option gnutls_require_mac main string unset
+This option controls the MAC algorithms when GnuTLS is used in an Exim
+client. For details, see section &<<SECTreqciphgnu>>&.
+
+.option gnutls_require_protocols main string unset
+This option controls the protocols when GnuTLS is used in an Exim
+client. For details, see section &<<SECTreqciphgnu>>&.
+
+.option helo_data smtp string&!! "see below"
+.cindex "HELO" "argument, setting"
+.cindex "EHLO" "argument, setting"
+.cindex "LHLO argument setting"
+The value of this option is expanded after a connection to a another host has
+been set up. The result is used as the argument for the EHLO, HELO, or LHLO
+command that starts the outgoing SMTP or LMTP session. The default value of the
+option is:
+.code
+$primary_hostname
+.endd
+During the expansion, the variables &$host$& and &$host_address$& are set to
+the identity of the remote host, and the variables &$sending_ip_address$& and
+&$sending_port$& are set to the local IP address and port number that are being
+used. These variables can be used to generate different values for different
+servers or different local IP addresses. For example, if you want the string
+that is used for &%helo_data%& to be obtained by a DNS lookup of the outgoing
+interface address, you could use this:
+.code
+helo_data = ${lookup dnsdb{ptr=$sending_ip_address}{$value}\
+  {$primary_hostname}}
+.endd
+The use of &%helo_data%& applies both to sending messages and when doing
+callouts.

 
 .option hosts smtp "string list&!!" unset
 Hosts are associated with an address by a router such as &(dnslookup)&, which
 
 .option hosts smtp "string list&!!" unset
 Hosts are associated with an address by a router such as &(dnslookup)&, which


@@ -21029,7 +21532,7 @@ unless &%hosts_randomize%& is set.
 
 
 .option hosts_avoid_esmtp smtp "host list&!!" unset
 
 
 .option hosts_avoid_esmtp smtp "host list&!!" unset

-.cindex "ESMTP" "avoiding use of"
+.cindex "ESMTP, avoiding use of"

 .cindex "HELO" "forcing use of"
 .cindex "EHLO" "avoiding use of"
 .cindex "PIPELINING" "avoiding the use of"
 .cindex "HELO" "forcing use of"
 .cindex "EHLO" "avoiding use of"
 .cindex "PIPELINING" "avoiding the use of"


@@ -21040,6 +21543,12 @@ start of the SMTP session. This means that it cannot use any of the ESMTP
 facilities such as AUTH, PIPELINING, SIZE, and STARTTLS.
 
 
 facilities such as AUTH, PIPELINING, SIZE, and STARTTLS.
 
 

+.option hosts_avoid_pipelining smtp "host list&!!" unset
+.cindex "PIPELINING" "avoiding the use of"
+Exim will not use the SMTP PIPELINING extension when delivering to any host
+that matches this list, even if the server host advertises PIPELINING support.
+
+

 .option hosts_avoid_tls smtp "host list&!!" unset
 .cindex "TLS" "avoiding for certain hosts"
 Exim will not try to start a TLS session when delivering to any host that
 .option hosts_avoid_tls smtp "host list&!!" unset
 .cindex "TLS" "avoiding for certain hosts"
 Exim will not try to start a TLS session when delivering to any host that


@@ -21087,7 +21596,7 @@ attached to the address are ignored, and instead the hosts specified by the
 If this option is set, and either the list of hosts is taken from the
 &%hosts%& or the &%fallback_hosts%& option, or the hosts supplied by the router
 were not obtained from MX records (this includes fallback hosts from the
 If this option is set, and either the list of hosts is taken from the
 &%hosts%& or the &%fallback_hosts%& option, or the hosts supplied by the router
 were not obtained from MX records (this includes fallback hosts from the

-router), and were not randomizied by the router, the order of trying the hosts
+router), and were not randomized by the router, the order of trying the hosts

 is randomized each time the transport runs. Randomizing the order of a host
 list can be used to do crude load sharing.
 
 is randomized each time the transport runs. Randomizing the order of a host
 list can be used to do crude load sharing.
 


@@ -21129,19 +21638,18 @@ unauthenticated. See also &%hosts_require_auth%&, and chapter
 &<<CHAPSMTPAUTH>>& for details of authentication.
 
 .option interface smtp "string list&!!" unset
 &<<CHAPSMTPAUTH>>& for details of authentication.
 
 .option interface smtp "string list&!!" unset

-.new

 .cindex "bind IP address"
 .cindex "IP address" "binding"
 .cindex "bind IP address"
 .cindex "IP address" "binding"

-.cindex "&$host$&"
-.cindex "&$host_address$&"
+.vindex "&$host$&"
+.vindex "&$host_address$&"

 This option specifies which interface to bind to when making an outgoing SMTP
 This option specifies which interface to bind to when making an outgoing SMTP

-call. &*Note:*& Do not confuse this with the interface address that was used
-when a message was received, which is in &$received_ip_address$&, formerly
-known as &$interface_address$&. The name was changed to minimize confusion with
-the outgoing interface address. There is no variable that contains an outgoing
+call. &new("The value is an IP address, not an interface name such as
+&`eth0`&.") Do not confuse this with the interface address that was used when a
+message was received, which is in &$received_ip_address$&, formerly known as
+&$interface_address$&. The name was changed to minimize confusion with the
+outgoing interface address. There is no variable that contains an outgoing

 interface address because, unless it is set by this option, its value is
 unknown.
 interface address because, unless it is set by this option, its value is
 unknown.

-.wen

 
 During the expansion of the &%interface%& option the variables &$host$& and
 &$host_address$& refer to the host to which a connection is about to be made
 
 During the expansion of the &%interface%& option the variables &$host$& and
 &$host_address$& refer to the host to which a connection is about to be made


@@ -21163,7 +21671,7 @@ interface to use if the host has more than one.
 This option controls the setting of SO_KEEPALIVE on outgoing TCP/IP socket
 connections. When set, it causes the kernel to probe idle connections
 periodically, by sending packets with &"old"& sequence numbers. The other end
 This option controls the setting of SO_KEEPALIVE on outgoing TCP/IP socket
 connections. When set, it causes the kernel to probe idle connections
 periodically, by sending packets with &"old"& sequence numbers. The other end

-of the connection should send a acknowledgement if the connection is still okay
+of the connection should send a acknowledgment if the connection is still okay

 or a reset if the connection has been aborted. The reason for doing this is
 that it has the beneficial effect of freeing up certain types of connection
 that can get stuck when the remote host is disconnected without tidying up the
 or a reset if the connection has been aborted. The reason for doing this is
 that it has the beneficial effect of freeing up certain types of connection
 that can get stuck when the remote host is disconnected without tidying up the


@@ -21186,7 +21694,7 @@ permits this.
 
 
 .option multi_domain smtp boolean true
 
 
 .option multi_domain smtp boolean true

-.cindex "&$domain$&"
+.vindex "&$domain$&"

 When this option is set, the &(smtp)& transport can handle a number of
 addresses containing a mixture of different domains provided they all resolve
 to the same list of hosts. Turning the option off restricts the transport to
 When this option is set, the &(smtp)& transport can handle a number of
 addresses containing a mixture of different domains provided they all resolve
 to the same list of hosts. Turning the option off restricts the transport to


@@ -21196,7 +21704,6 @@ is a single domain involved in a remote delivery.
 
 
 .option port smtp string&!! "see below"
 
 
 .option port smtp string&!! "see below"

-.new

 .cindex "port" "sending TCP/IP"
 .cindex "TCP/IP" "setting outgoing port"
 This option specifies the TCP/IP port on the server to which Exim connects.
 .cindex "port" "sending TCP/IP"
 .cindex "TCP/IP" "setting outgoing port"
 This option specifies the TCP/IP port on the server to which Exim connects.


@@ -21204,7 +21711,6 @@ This option specifies the TCP/IP port on the server to which Exim connects.
 received, which is in &$received_port$&, formerly known as &$interface_port$&.
 The name was changed to minimize confusion with the outgoing port. There is no
 variable that contains an outgoing port.
 received, which is in &$received_port$&, formerly known as &$interface_port$&.
 The name was changed to minimize confusion with the outgoing port. There is no
 variable that contains an outgoing port.

-.wen

 
 If the value of this option begins with a digit it is taken as a port number;
 otherwise it is looked up using &[getservbyname()]&. The default value is
 
 If the value of this option begins with a digit it is taken as a port number;
 otherwise it is looked up using &[getservbyname()]&. The default value is


@@ -21280,10 +21786,10 @@ the use of the SIZE option altogether.
 
 
 .option tls_certificate smtp string&!! unset
 
 
 .option tls_certificate smtp string&!! unset

-.cindex "TLS client certificate" "location of"
-.cindex "certificate for client" "location of"
-.cindex "&$host$&"
-.cindex "&$host_address$&"
+.cindex "TLS" "client certificate, location of"
+.cindex "certificate" "client, location of"
+.vindex "&$host$&"
+.vindex "&$host_address$&"

 The value of this option must be the absolute path to a file which contains the
 client's certificate, for possible use when sending a message over an encrypted
 connection. The values of &$host$& and &$host_address$& are set to the name and
 The value of this option must be the absolute path to a file which contains the
 client's certificate, for possible use when sending a message over an encrypted
 connection. The values of &$host$& and &$host_address$& are set to the name and


@@ -21305,9 +21811,9 @@ be the name of a file that contains a CRL in PEM format.
 
 
 .option tls_privatekey smtp string&!! unset
 
 
 .option tls_privatekey smtp string&!! unset

-.cindex "TLS client private key" "location of"
-.cindex "&$host$&"
-.cindex "&$host_address$&"
+.cindex "TLS" "client private key, location of"
+.vindex "&$host$&"
+.vindex "&$host_address$&"

 The value of this option must be the absolute path to a file which contains the
 client's private key. This is used when sending a message over an encrypted
 connection using a client certificate. The values of &$host$& and
 The value of this option must be the absolute path to a file which contains the
 client's private key. This is used when sending a message over an encrypted
 connection using a client certificate. The values of &$host$& and


@@ -21320,8 +21826,8 @@ the certificate. See chapter &<<CHAPTLS>>& for details of TLS.
 .option tls_require_ciphers smtp string&!! unset
 .cindex "TLS" "requiring specific ciphers"
 .cindex "cipher" "requiring specific"
 .option tls_require_ciphers smtp string&!! unset
 .cindex "TLS" "requiring specific ciphers"
 .cindex "cipher" "requiring specific"

-.cindex "&$host$&"
-.cindex "&$host_address$&"
+.vindex "&$host$&"
+.vindex "&$host_address$&"

 The value of this option must be a list of permitted cipher suites, for use
 when setting up an outgoing encrypted connection. (There is a global option of
 the same name for controlling incoming connections.) The values of &$host$& and
 The value of this option must be a list of permitted cipher suites, for use
 when setting up an outgoing encrypted connection. (There is a global option of
 the same name for controlling incoming connections.) The values of &$host$& and


@@ -21349,8 +21855,8 @@ in clear.
 .option tls_verify_certificates smtp string&!! unset
 .cindex "TLS" "server certificate verification"
 .cindex "certificate" "verification of server"
 .option tls_verify_certificates smtp string&!! unset
 .cindex "TLS" "server certificate verification"
 .cindex "certificate" "verification of server"

-.cindex "&$host$&"
-.cindex "&$host_address$&"
+.vindex "&$host$&"
+.vindex "&$host_address$&"

 The value of this option must be the absolute path to a file containing
 permitted server certificates, for use when setting up an encrypted connection.
 Alternatively, if you are using OpenSSL, you can set
 The value of this option must be the absolute path to a file containing
 permitted server certificates, for use when setting up an encrypted connection.
 Alternatively, if you are using OpenSSL, you can set


@@ -21463,7 +21969,7 @@ such a domain should be rewritten using the &"canonical"& name, and some MTAs
 do this. The new RFCs do not contain this suggestion.
 
 
 do this. The new RFCs do not contain this suggestion.
 
 

-.section "Explicitly configured address rewriting"
+.section "Explicitly configured address rewriting" "SECID147"

 This chapter describes the rewriting rules that can be used in the
 main rewrite section of the configuration file, and also in the generic
 &%headers_rewrite%& option that can be set on any transport.
 This chapter describes the rewriting rules that can be used in the
 main rewrite section of the configuration file, and also in the generic
 &%headers_rewrite%& option that can be set on any transport.


@@ -21513,13 +22019,13 @@ A host rewrites the local parts of its own users so that, for example,
 
 
 
 
 
 

-.section "When does rewriting happen?"
+.section "When does rewriting happen?" "SECID148"

 .cindex "rewriting" "timing of"
 .cindex "&ACL;" "rewriting addresses in"
 Configured address rewriting can take place at several different stages of a
 message's processing.
 
 .cindex "rewriting" "timing of"
 .cindex "&ACL;" "rewriting addresses in"
 Configured address rewriting can take place at several different stages of a
 message's processing.
 

-.cindex "&$sender_address$&"
+.vindex "&$sender_address$&"

 At the start of an ACL for MAIL, the sender address may have been rewritten
 by a special SMTP-time rewrite rule (see section &<<SECTrewriteS>>&), but no
 ordinary rewrite rules have yet been applied. If, however, the sender address
 At the start of an ACL for MAIL, the sender address may have been rewritten
 by a special SMTP-time rewrite rule (see section &<<SECTrewriteS>>&), but no
 ordinary rewrite rules have yet been applied. If, however, the sender address


@@ -21529,8 +22035,8 @@ rewritten address. This also applies if sender verification happens in a
 RCPT ACL. Otherwise, when the sender address is not verified, it is
 rewritten as soon as a message's header lines have been received.
 
 RCPT ACL. Otherwise, when the sender address is not verified, it is
 rewritten as soon as a message's header lines have been received.
 

-.cindex "&$domain$&"
-.cindex "&$local_part$&"
+.vindex "&$domain$&"
+.vindex "&$local_part$&"

 Similarly, at the start of an ACL for RCPT, the current recipient's address
 may have been rewritten by a special SMTP-time rewrite rule, but no ordinary
 rewrite rules have yet been applied to it. However, the behaviour is different
 Similarly, at the start of an ACL for RCPT, the current recipient's address
 may have been rewritten by a special SMTP-time rewrite rule, but no ordinary
 rewrite rules have yet been applied to it. However, the behaviour is different


@@ -21568,7 +22074,7 @@ transport time.
 
 
 
 
 
 

-.section "Testing the rewriting rules that apply on input"
+.section "Testing the rewriting rules that apply on input" "SECID149"

 .cindex "rewriting" "testing"
 .cindex "testing" "rewriting"
 Exim's input rewriting configuration appears in a part of the run time
 .cindex "rewriting" "testing"
 .cindex "testing" "rewriting"
 Exim's input rewriting configuration appears in a part of the run time


@@ -21598,7 +22104,7 @@ present time, there is no equivalent way of testing rewriting rules that are
 set for a particular transport.
 
 
 set for a particular transport.
 
 

-.section "Rewriting rules"
+.section "Rewriting rules" "SECID150"

 .cindex "rewriting" "rules"
 The rewrite section of the configuration file consists of lines of rewriting
 rules in the form
 .cindex "rewriting" "rules"
 The rewrite section of the configuration file consists of lines of rewriting
 rules in the form


@@ -21628,8 +22134,8 @@ address in &'To:'& must not assume that the message's address in &'From:'& has
 (or has not) already been rewritten. However, a rewrite of &'From:'& may assume
 that the envelope sender has already been rewritten.
 
 (or has not) already been rewritten. However, a rewrite of &'From:'& may assume
 that the envelope sender has already been rewritten.
 

-.cindex "&$domain$&"
-.cindex "&$local_part$&"
+.vindex "&$domain$&"
+.vindex "&$local_part$&"

 The variables &$local_part$& and &$domain$& can be used in the replacement
 string to refer to the address that is being rewritten. Note that lookup-driven
 rewriting can be done by a rule of the form
 The variables &$local_part$& and &$domain$& can be used in the replacement
 string to refer to the address that is being rewritten. Note that lookup-driven
 rewriting can be done by a rule of the form


@@ -21640,7 +22146,7 @@ where the lookup key uses &$1$& and &$2$& or &$local_part$& and &$domain$& to
 refer to the address that is being rewritten.
 
 
 refer to the address that is being rewritten.
 
 

-.section "Rewriting patterns"
+.section "Rewriting patterns" "SECID151"

 .cindex "rewriting" "patterns"
 .cindex "address list" "in a rewriting pattern"
 The source pattern in a rewriting rule is any item which may appear in an
 .cindex "rewriting" "patterns"
 .cindex "address list" "in a rewriting pattern"
 The source pattern in a rewriting rule is any item which may appear in an


@@ -21701,7 +22207,7 @@ whole domain. For non-partial domain lookups, no numerical variables are set.
 .endlist
 
 
 .endlist
 
 

-.section "Rewriting replacements"
+.section "Rewriting replacements" "SECID152"

 .cindex "rewriting" "replacements"
 If the replacement string for a rule is a single asterisk, addresses that
 match the pattern and the flags are &'not'& rewritten, and no subsequent
 .cindex "rewriting" "replacements"
 If the replacement string for a rule is a single asterisk, addresses that
 match the pattern and the flags are &'not'& rewritten, and no subsequent


@@ -21712,8 +22218,8 @@ hatta@lookingglass.fict.example  *  f
 specifies that &'hatta@lookingglass.fict.example'& is never to be rewritten in
 &'From:'& headers.
 
 specifies that &'hatta@lookingglass.fict.example'& is never to be rewritten in
 &'From:'& headers.
 

-.cindex "&$domain$&"
-.cindex "&$local_part$&"
+.vindex "&$domain$&"
+.vindex "&$local_part$&"

 If the replacement string is not a single asterisk, it is expanded, and must
 yield a fully qualified address. Within the expansion, the variables
 &$local_part$& and &$domain$& refer to the address that is being rewritten.
 If the replacement string is not a single asterisk, it is expanded, and must
 yield a fully qualified address. Within the expansion, the variables
 &$local_part$& and &$domain$& refer to the address that is being rewritten.


@@ -21727,7 +22233,7 @@ entry written to the panic log.
 
 
 
 
 
 

-.section "Rewriting flags"
+.section "Rewriting flags" "SECID153"

 There are three different kinds of flag that may appear on rewriting rules:
 
 .ilist
 There are three different kinds of flag that may appear on rewriting rules:
 
 .ilist


@@ -21744,7 +22250,8 @@ E, F, T, and S are not permitted.
 
 
 
 
 
 

-.section "Flags specifying which headers and envelope addresses to rewrite"
+.section "Flags specifying which headers and envelope addresses to rewrite" &&&
+         "SECID154"

 .cindex "rewriting" "flags"
 If none of the following flag letters, nor the &"S"& flag (see section
 &<<SECTrewriteS>>&) are present, a main rewriting rule applies to all headers
 .cindex "rewriting" "flags"
 If none of the following flag letters, nor the &"S"& flag (see section
 &<<SECTrewriteS>>&) are present, a main rewriting rule applies to all headers


@@ -21763,6 +22270,12 @@ rewriting rule is skipped unless the relevant addresses are being processed.
 &`s`&       rewrite the &'Sender:'& header
 &`t`&       rewrite the &'To:'& header
 .endd
 &`s`&       rewrite the &'Sender:'& header
 &`t`&       rewrite the &'To:'& header
 .endd

+.new
+"All headers" means all of the headers listed above that can be selected
+individually, plus their &'Resent-'& versions. It does not include
+other headers such as &'Subject:'& etc.
+.wen
+

 You should be particularly careful about rewriting &'Sender:'& headers, and
 restrict this to special known cases in your own domains.
 
 You should be particularly careful about rewriting &'Sender:'& headers, and
 restrict this to special known cases in your own domains.
 


@@ -21777,8 +22290,8 @@ before any other processing; even before syntax checking. The pattern is
 required to be a regular expression, and it is matched against the whole of the
 data for the command, including any surrounding angle brackets.
 
 required to be a regular expression, and it is matched against the whole of the
 data for the command, including any surrounding angle brackets.
 

-.cindex "&$domain$&"
-.cindex "&$local_part$&"
+.vindex "&$domain$&"
+.vindex "&$local_part$&"

 This form of rewrite rule allows for the handling of addresses that are not
 compliant with RFCs 2821 and 2822 (for example, &"bang paths"& in batched SMTP
 input). Because the input is not required to be a syntactically valid address,
 This form of rewrite rule allows for the handling of addresses that are not
 compliant with RFCs 2821 and 2822 (for example, &"bang paths"& in batched SMTP
 input). Because the input is not required to be a syntactically valid address,


@@ -21787,7 +22300,7 @@ expansion of the replacement string. The result of rewriting replaces the
 original address in the MAIL or RCPT command.
 
 
 original address in the MAIL or RCPT command.
 
 

-.section "Flags controlling the rewriting process"
+.section "Flags controlling the rewriting process" "SECID155"

 There are four flags which control the way the rewriting process works. These
 take effect only when a rule is invoked, that is, when the address is of the
 correct type (matches the flags) and matches the pattern:
 There are four flags which control the way the rewriting process works. These
 take effect only when a rule is invoked, that is, when the address is of the
 correct type (matches the flags) and matches the pattern:


@@ -21832,7 +22345,7 @@ rewritten, all but the working part of the replacement address is discarded.
 .endlist
 
 
 .endlist
 
 

-.section "Rewriting examples"
+.section "Rewriting examples" "SECID156"

 Here is an example of the two common rewriting paradigms:
 .code
 *@*.hitch.fict.example  $1@hitch.fict.example
 Here is an example of the two common rewriting paradigms:
 .code
 *@*.hitch.fict.example  $1@hitch.fict.example


@@ -21894,13 +22407,16 @@ can be done on the rewritten addresses.
 . ////////////////////////////////////////////////////////////////////////////
 
 .chapter "Retry configuration" "CHAPretry"
 . ////////////////////////////////////////////////////////////////////////////
 
 .chapter "Retry configuration" "CHAPretry"

-.scindex IIDretconf1 "retry configuration" "description of"
+.scindex IIDretconf1 "retry" "configuration, description of"

 .scindex IIDregconf2 "configuration file" "retry section"
 .scindex IIDregconf2 "configuration file" "retry section"

-The &"retry"& section of the run time configuration file contains a list of
+The &"retry"& section of the runtime configuration file contains a list of

 retry rules that control how often Exim tries to deliver messages that cannot
 retry rules that control how often Exim tries to deliver messages that cannot

-be delivered at the first attempt. If there are no retry rules, temporary
-errors are treated as permanent. The &%-brt%& command line option can be used
-to test which retry rule will be used for a given address, domain and error.
+be delivered at the first attempt. If there are no retry rules (the section is
+empty or not present), there are no retries. In this situation, temporary
+errors are treated as permanent. The default configuration contains a single,
+general-purpose retry rule (see section &<<SECID57>>&). The &%-brt%& command
+line option can be used to test which retry rule will be used for a given
+address, domain and error.

 
 The most common cause of retries is temporary failure to deliver to a remote
 host because the host is down, or inaccessible because of a network problem.
 
 The most common cause of retries is temporary failure to deliver to a remote
 host because the host is down, or inaccessible because of a network problem.


@@ -21932,7 +22448,7 @@ suffers a temporary failure, the retry data is updated as normal, and
 subsequent delivery attempts from queue runs occur only when the retry time for
 the local address is reached.
 
 subsequent delivery attempts from queue runs occur only when the retry time for
 the local address is reached.
 

-.section "Changing retry rules"
+.section "Changing retry rules" "SECID157"

 If you change the retry rules in your configuration, you should consider
 whether or not to delete the retry data that is stored in Exim's spool area in
 files with names like &_db/retry_&. Deleting any of Exim's hints files is
 If you change the retry rules in your configuration, you should consider
 whether or not to delete the retry data that is stored in Exim's spool area in
 files with names like &_db/retry_&. Deleting any of Exim's hints files is


@@ -21947,7 +22463,7 @@ messages that it should now be retaining.
 
 
 
 
 
 

-.section "Format of retry rules"
+.section "Format of retry rules" "SECID158"

 .cindex "retry" "rules"
 Each retry rule occupies one line and consists of three or four parts,
 separated by white space: a pattern, an error name, an optional list of sender
 .cindex "retry" "rules"
 Each retry rule occupies one line and consists of three or four parts,
 separated by white space: a pattern, an error name, an optional list of sender


@@ -21987,7 +22503,7 @@ expressions work in address lists.
 .endd
 
 
 .endd
 
 

-.section "Choosing which retry rule to use for address errors"
+.section "Choosing which retry rule to use for address errors" "SECID159"

 When Exim is looking for a retry rule after a routing attempt has failed (for
 example, after a DNS timeout), each line in the retry configuration is tested
 against the complete address only if &%retry_use_local_part%& is set for the
 When Exim is looking for a retry rule after a routing attempt has failed (for
 example, after a DNS timeout), each line in the retry configuration is tested
 against the complete address only if &%retry_use_local_part%& is set for the


@@ -22003,7 +22519,6 @@ configuration is tested against the complete address only if
 &%retry_use_local_part%& is set for the transport (it defaults true for all
 local transports).
 
 &%retry_use_local_part%& is set for the transport (it defaults true for all
 local transports).
 

-.new

 .cindex "4&'xx'& responses" "retry rules for"
 However, when Exim is looking for a retry rule after a remote delivery attempt
 suffers an address error (a 4&'xx'& SMTP response for a recipient address), the
 .cindex "4&'xx'& responses" "retry rules for"
 However, when Exim is looking for a retry rule after a remote delivery attempt
 suffers an address error (a 4&'xx'& SMTP response for a recipient address), the


@@ -22015,11 +22530,11 @@ reached. You can delay the recipient without regard to the sender by setting
 &%address_retry_include_sender%& false in the &(smtp)& transport but this can
 lead to problems with servers that regularly issue 4&'xx'& responses to RCPT
 commands.
 &%address_retry_include_sender%& false in the &(smtp)& transport but this can
 lead to problems with servers that regularly issue 4&'xx'& responses to RCPT
 commands.

-.wen

 
 
 
 
 
 

-.section "Choosing which retry rule to use for host and message errors"
+.section "Choosing which retry rule to use for host and message errors" &&&
+         "SECID160"

 For a temporary error that is not related to an individual address (for
 example, a connection timeout), each line in the retry configuration is checked
 twice. First, the name of the remote host is used as a domain name (preceded by
 For a temporary error that is not related to an individual address (for
 example, a connection timeout), each line in the retry configuration is checked
 twice. First, the name of the remote host is used as a domain name (preceded by


@@ -22057,7 +22572,7 @@ route_list = *.a.example  192.168.34.23
 then the &"host name"& that is used when searching for a retry rule is the
 textual form of the IP address.
 
 then the &"host name"& that is used when searching for a retry rule is the
 textual form of the IP address.
 

-.section "Retry rules for specific errors"
+.section "Retry rules for specific errors" "SECID161"

 .cindex "retry" "specific errors; specifying"
 The second field in a retry rule is the name of a particular error, or an
 asterisk, which matches any error. The errors that can be tested for are:
 .cindex "retry" "specific errors; specifying"
 The second field in a retry rule is the name of a particular error, or an
 asterisk, which matches any error. The errors that can be tested for are:


@@ -22173,7 +22688,7 @@ error).
 
 
 
 
 
 

-.section "Retry rules for specified senders"
+.section "Retry rules for specified senders" "SECID162"

 .cindex "retry" "rules; sender-specific"
 You can specify retry rules that apply only when the failing message has a
 specific sender. In particular, this can be used to define retry rules that
 .cindex "retry" "rules; sender-specific"
 You can specify retry rules that apply only when the failing message has a
 specific sender. In particular, this can be used to define retry rules that


@@ -22210,7 +22725,7 @@ list is never matched.
 
 
 
 
 
 

-.section "Retry parameters"
+.section "Retry parameters" "SECID163"

 .cindex "retry" "parameters in rules"
 The third (or fourth, if a senders list is present) field in a retry rule is a
 sequence of retry parameter sets, separated by semicolons. Each set consists of
 .cindex "retry" "parameters in rules"
 The third (or fourth, if a senders list is present) field in a retry rule is a
 sequence of retry parameter sets, separated by semicolons. Each set consists of


@@ -22239,7 +22754,7 @@ is used to increase the size of the interval at each retry.
 .next
 &'H'&: retry at randomized intervals. The arguments are as for &'G'&. For each
 retry, the previous interval is multiplied by the factor in order to get a
 .next
 &'H'&: retry at randomized intervals. The arguments are as for &'G'&. For each
 retry, the previous interval is multiplied by the factor in order to get a

-maximum for the next interval. The mininum interval is the first argument of
+maximum for the next interval. The minimum interval is the first argument of

 the parameter, and an actual interval is chosen randomly between them. Such a
 rule has been found to be helpful in cluster configurations when all the
 members of the cluster restart at once, and may therefore synchronize their
 the parameter, and an actual interval is chosen randomly between them. Such a
 rule has been found to be helpful in cluster configurations when all the
 members of the cluster restart at once, and may therefore synchronize their


@@ -22254,8 +22769,8 @@ current time. For geometrically increasing intervals, retry intervals are
 computed from the rule's parameters until one that is greater than the previous
 interval is found. The main configuration variable
 .cindex "limit" "retry interval"
 computed from the rule's parameters until one that is greater than the previous
 interval is found. The main configuration variable
 .cindex "limit" "retry interval"

-.cindex "retry interval" "maximum"
-.cindex "&%retry_interval_max%&"
+.cindex "retry" "interval, maximum"
+.oindex "&%retry_interval_max%&"

 &%retry_interval_max%& limits the maximum interval between retries. It
 cannot be set greater than &`24h`&, which is its default value.
 
 &%retry_interval_max%& limits the maximum interval between retries. It
 cannot be set greater than &`24h`&, which is its default value.
 


@@ -22288,7 +22803,7 @@ are for the hosts associated with a particular mail domain, and also for local
 deliveries that have been deferred.
 
 
 deliveries that have been deferred.
 
 

-.section "Retry rule examples"
+.section "Retry rule examples" "SECID164"

 Here are some example retry rules:
 .code
 alice@wonderland.fict.example quota_5d  F,7d,3h
 Here are some example retry rules:
 .code
 alice@wonderland.fict.example quota_5d  F,7d,3h


@@ -22326,9 +22841,9 @@ hours, then with intervals starting at one hour and increasing by a factor of
 
 
 
 
 
 

-.section "Timeout of retry data"
+.section "Timeout of retry data" "SECID165"

 .cindex "timeout" "of retry data"
 .cindex "timeout" "of retry data"

-.cindex "&%retry_data_expire%&"
+.oindex "&%retry_data_expire%&"

 .cindex "hints database" "data expiry"
 .cindex "retry" "timeout of data"
 Exim timestamps the data that it writes to its retry hints database. When it
 .cindex "hints database" "data expiry"
 .cindex "retry" "timeout of data"
 Exim timestamps the data that it writes to its retry hints database. When it


@@ -22350,8 +22865,8 @@ message at least once every 7 days the retry data never expires.
 
 
 
 
 
 

-.section "Long-term failures"
-.cindex "delivery failure" "long-term"
+.section "Long-term failures" "SECID166"
+.cindex "delivery failure, long-term"

 .cindex "retry" "after long-term failure"
 Special processing happens when an email address has been failing for so long
 that the cutoff time for the last algorithm is reached. For example, using the
 .cindex "retry" "after long-term failure"
 Special processing happens when an email address has been failing for so long
 that the cutoff time for the last algorithm is reached. For example, using the


@@ -22374,7 +22889,7 @@ messages. If this delivery fails, the address fails immediately. The
 post-cutoff retry time is not used.
 
 If the delivery is remote, there are two possibilities, controlled by the
 post-cutoff retry time is not used.
 
 If the delivery is remote, there are two possibilities, controlled by the

-.cindex "&%delay_after_cutoff%&"
+.oindex "&%delay_after_cutoff%&"

 &%delay_after_cutoff%& option of the &(smtp)& transport. The option is true by
 default. Until the post-cutoff retry time for one of the IP addresses is
 reached, the failing email address is bounced immediately, without a delivery
 &%delay_after_cutoff%& option of the &(smtp)& transport. The option is true by
 default. Until the post-cutoff retry time for one of the IP addresses is
 reached, the failing email address is bounced immediately, without a delivery


@@ -22400,7 +22915,7 @@ If there is a continuous stream of messages for the failing domains, setting
 deliver to permanently failing IP addresses than when &%delay_after_cutoff%& is
 true.
 
 deliver to permanently failing IP addresses than when &%delay_after_cutoff%& is
 true.
 

-.section "Deliveries that work intermittently"
+.section "Deliveries that work intermittently" "SECID167"

 .cindex "retry" "intermittently working deliveries"
 Some additional logic is needed to cope with cases where a host is
 intermittently available, or when a message has some attribute that prevents
 .cindex "retry" "intermittently working deliveries"
 Some additional logic is needed to cope with cases where a host is
 intermittently available, or when a message has some attribute that prevents


@@ -22483,7 +22998,7 @@ includes the list of supported mechanisms. For example:
 &`$ `&&*&`telnet server.example 25`&*&
 &`Trying 192.168.34.25...`&
 &`Connected to server.example.`&
 &`$ `&&*&`telnet server.example 25`&*&
 &`Trying 192.168.34.25...`&
 &`Connected to server.example.`&

-&`Escape character is '^]'.`&
+&`Escape character is &#x0027;^]&#x0027;.`&

 &`220 server.example ESMTP Exim 4.20 ...`&
 &*&`ehlo client.example`&*&
 &`250-server.example Hello client.example [10.8.4.5]`&
 &`220 server.example ESMTP Exim 4.20 ...`&
 &*&`ehlo client.example`&*&
 &`250-server.example Hello client.example [10.8.4.5]`&


@@ -22543,10 +23058,22 @@ in Exim.
 
 
 
 
 
 

-.section "Generic options for authenticators"
+.section "Generic options for authenticators" "SECID168"

 .cindex "authentication" "generic options"
 .cindex "options" "generic; for authenticators"
 
 .cindex "authentication" "generic options"
 .cindex "options" "generic; for authenticators"
 

+.option client_condition authenticators string&!! unset
+When Exim is authenticating as a client, it skips any authenticator whose
+&%client_condition%& expansion yields &"0"&, &"no"&, or &"false"&. This can be
+used, for example, to skip plain text authenticators when the connection is not
+encrypted by a setting such as:
+.code
+client_condition = ${if !eq{$tls_cipher}{}}
+.endd
+(Older documentation incorrectly states that &$tls_cipher$& contains the cipher
+used for incoming messages. In fact, during SMTP delivery, it contains the
+cipher used for the delivery.)
+

 
 .option driver authenticators string unset
 This option must always be set. It specifies which of the available
 
 .option driver authenticators string unset
 This option must always be set. It specifies which of the available


@@ -22570,7 +23097,6 @@ forced, and was not caused by a lookup defer, the incident is logged.
 See section &<<SECTauthexiser>>& below for further discussion.
 
 
 See section &<<SECTauthexiser>>& below for further discussion.
 
 

-.new

 .option server_condition authenticators string&!! unset
 This option must be set for a &%plaintext%& server authenticator, where it
 is used directly to control authentication. See section &<<SECTplainserver>>&
 .option server_condition authenticators string&!! unset
 This option must be set for a &%plaintext%& server authenticator, where it
 is used directly to control authentication. See section &<<SECTplainserver>>&


@@ -22586,7 +23112,6 @@ string, &"0"&, &"no"&, or &"false"&, authentication fails. If the result of the
 expansion is &"1"&, &"yes"&, or &"true"&, authentication succeeds. For any
 other result, a temporary error code is returned, with the expanded string as
 the error text.
 expansion is &"1"&, &"yes"&, or &"true"&, authentication succeeds. For any
 other result, a temporary error code is returned, with the expanded string as
 the error text.

-.wen

 
 
 .option server_debug_print authenticators string&!! unset
 
 
 .option server_debug_print authenticators string&!! unset


@@ -22599,7 +23124,7 @@ output, and Exim carries on processing.
 
 
 .option server_set_id authenticators string&!! unset
 
 
 .option server_set_id authenticators string&!! unset

-.cindex "&$authenticated_id$&"
+.vindex "&$authenticated_id$&"

 When an Exim server successfully authenticates a client, this string is
 expanded using data from the authentication, and preserved for any incoming
 messages in the variable &$authenticated_id$&. It is also included in the log
 When an Exim server successfully authenticates a client, this string is
 expanded using data from the authentication, and preserved for any incoming
 messages in the variable &$authenticated_id$&. It is also included in the log


@@ -22634,7 +23159,7 @@ than EHLO), the use of AUTH= is a syntax error.
 .next
 If the value of the AUTH= parameter is &"<>"&, it is ignored.
 .next
 .next
 If the value of the AUTH= parameter is &"<>"&, it is ignored.
 .next

-.cindex "&$authenticated_sender$&"
+.vindex "&$authenticated_sender$&"

 If &%acl_smtp_mailauth%& is defined, the ACL it specifies is run. While it is
 running, the value of &$authenticated_sender$& is set to the value obtained
 from the AUTH= parameter. If the ACL does not yield &"accept"&, the value of
 If &%acl_smtp_mailauth%& is defined, the ACL it specifies is run. While it is
 running, the value of &$authenticated_sender$& is set to the value obtained
 from the AUTH= parameter. If the ACL does not yield &"accept"&, the value of


@@ -22662,7 +23187,7 @@ hosts to which Exim authenticates as a client. Do not confuse this value with
 &$authenticated_id$&, which is a string obtained from the authentication
 process, and which is not usually a complete email address.
 
 &$authenticated_id$&, which is a string obtained from the authentication
 process, and which is not usually a complete email address.
 

-.cindex "&$sender_address$&"
+.vindex "&$sender_address$&"

 Whenever an AUTH= value is ignored, the incident is logged. The ACL for
 MAIL, if defined, is run after AUTH= is accepted or ignored. It can
 therefore make use of &$authenticated_sender$&. The converse is not true: the
 Whenever an AUTH= value is ignored, the incident is logged. The ACL for
 MAIL, if defined, is run after AUTH= is accepted or ignored. It can
 therefore make use of &$authenticated_sender$&. The converse is not true: the


@@ -22701,12 +23226,12 @@ so that no authentication mechanisms are advertised to them.
 
 The &%server_advertise_condition%& controls the advertisement of individual
 authentication mechanisms. For example, it can be used to restrict the
 
 The &%server_advertise_condition%& controls the advertisement of individual
 authentication mechanisms. For example, it can be used to restrict the

-advertisement of a patricular mechanism to encrypted connections, by a setting
+advertisement of a particular mechanism to encrypted connections, by a setting

 such as:
 .code
 server_advertise_condition = ${if eq{$tls_cipher}{}{no}{yes}}
 .endd
 such as:
 .code
 server_advertise_condition = ${if eq{$tls_cipher}{}{no}{yes}}
 .endd

-.cindex "&$tls_cipher$&"
+.vindex "&$tls_cipher$&"

 If the session is encrypted, &$tls_cipher$& is not empty, and so the expansion
 yields &"yes"&, which allows the advertisement to happen.
 
 If the session is encrypted, &$tls_cipher$& is not empty, and so the expansion
 yields &"yes"&, which allows the advertisement to happen.
 


@@ -22735,8 +23260,8 @@ the appropriate authentication protocol, and authentication either succeeds or
 fails. If there is no matching advertised mechanism, the AUTH command is
 rejected with a 504 error.
 
 fails. If there is no matching advertised mechanism, the AUTH command is
 rejected with a 504 error.
 

-.cindex "&$received_protocol$&"
-.cindex "&$sender_host_authenticated$&"
+.vindex "&$received_protocol$&"
+.vindex "&$sender_host_authenticated$&"

 When a message is received from an authenticated host, the value of
 &$received_protocol$& is set to &"esmtpa"& or &"esmtpsa"& instead of &"esmtp"&
 or &"esmtps"&, and &$sender_host_authenticated$& contains the name (not the
 When a message is received from an authenticated host, the value of
 &$received_protocol$& is set to &"esmtpa"& or &"esmtpsa"& instead of &"esmtp"&
 or &"esmtps"&, and &$sender_host_authenticated$& contains the name (not the


@@ -22747,7 +23272,7 @@ no successful authentication.
 
 
 
 
 
 

-.section "Testing server authentication"
+.section "Testing server authentication" "SECID169"

 .cindex "authentication" "testing a server"
 .cindex "AUTH" "testing a server"
 .cindex "base64 encoding" "creating authentication test data"
 .cindex "authentication" "testing a server"
 .cindex "AUTH" "testing a server"
 .cindex "base64 encoding" "creating authentication test data"


@@ -22796,7 +23321,7 @@ should check your version before relying on this suggestion.
 
 
 
 
 
 

-.section "Authentication by an Exim client"
+.section "Authentication by an Exim client" "SECID170"

 .cindex "authentication" "on an Exim client"
 The &(smtp)& transport has two options called &%hosts_require_auth%& and
 &%hosts_try_auth%&. When the &(smtp)& transport connects to a server that
 .cindex "authentication" "on an Exim client"
 The &(smtp)& transport has two options called &%hosts_require_auth%& and
 &%hosts_try_auth%&. When the &(smtp)& transport connects to a server that


@@ -22804,20 +23329,19 @@ announces support for authentication, and the host matches an entry in either
 of these options, Exim (as a client) tries to authenticate as follows:
 
 .ilist
 of these options, Exim (as a client) tries to authenticate as follows:
 
 .ilist

-For each authenticator that is configured as a client, it searches the
-authentication mechanisms announced by the server for one whose name
-matches the public name of the authenticator.
-.next
-.cindex "&$host$&"
-.cindex "&$host_address$&"
-When it finds one that matches, it runs the authenticator's client code.
-The variables &$host$& and &$host_address$& are available for any string
-expansions that the client might do. They are set to the server's name and
-IP address. If any expansion is forced to fail, the authentication attempt
-is abandoned,
-and Exim moves on to the next authenticator.
-Otherwise an expansion failure causes delivery to be
-deferred.
+For each authenticator that is configured as a client, in the order in which
+they are defined in the configuration, it searches the authentication
+mechanisms announced by the server for one whose name matches the public name
+of the authenticator.
+.next
+.vindex "&$host$&"
+.vindex "&$host_address$&"
+When it finds one that matches, it runs the authenticator's client code. The
+variables &$host$& and &$host_address$& are available for any string expansions
+that the client might do. They are set to the server's name and IP address. If
+any expansion is forced to fail, the authentication attempt is abandoned, and
+Exim moves on to the next authenticator. Otherwise an expansion failure causes
+delivery to be deferred.

 .next
 If the result of the authentication attempt is a temporary error or a timeout,
 Exim abandons trying to send the message to the host for the moment. It will
 .next
 If the result of the authentication attempt is a temporary error or a timeout,
 Exim abandons trying to send the message to the host for the moment. It will


@@ -22868,15 +23392,13 @@ security risk; you are strongly advised to insist on the use of SMTP encryption
 use unencrypted plain text, you should not use the same passwords for SMTP
 connections as you do for login accounts.
 
 use unencrypted plain text, you should not use the same passwords for SMTP
 connections as you do for login accounts.
 

-.new
-.section "Plaintext options"
+.section "Plaintext options" "SECID171"

 .cindex "options" "&(plaintext)& authenticator (server)"
 When configured as a server, &(plaintext)& uses the following options:
 
 .option server_condition authenticators string&!! unset
 This is actually a global authentication option, but it must be set in order to
 configure the &(plaintext)& driver as a server. Its use is described below.
 .cindex "options" "&(plaintext)& authenticator (server)"
 When configured as a server, &(plaintext)& uses the following options:
 
 .option server_condition authenticators string&!! unset
 This is actually a global authentication option, but it must be set in order to
 configure the &(plaintext)& driver as a server. Its use is described below.

-.wen

 
 .option server_prompts plaintext string&!! unset
 The contents of this option, after expansion, must be a colon-separated list of
 
 .option server_prompts plaintext string&!! unset
 The contents of this option, after expansion, must be a colon-separated list of


@@ -22888,7 +23410,7 @@ given.
 .cindex "binary zero" "in &(plaintext)& authenticator"
 .cindex "numerical variables (&$1$& &$2$& etc)" &&&
         "in &(plaintext)& authenticator"
 .cindex "binary zero" "in &(plaintext)& authenticator"
 .cindex "numerical variables (&$1$& &$2$& etc)" &&&
         "in &(plaintext)& authenticator"

-.cindex "&$auth1$&, &$auth2$&, etc"
+.vindex "&$auth1$&, &$auth2$&, etc"

 .cindex "base64 encoding" "in &(plaintext)& authenticator"
 
 When running as a server, &(plaintext)& performs the authentication test by
 .cindex "base64 encoding" "in &(plaintext)& authenticator"
 
 When running as a server, &(plaintext)& performs the authentication test by


@@ -22908,7 +23430,7 @@ If there are more strings in &%server_prompts%& than the number of strings
 supplied with the AUTH command, the remaining prompts are used to obtain more
 data. Each response from the client may be a list of NUL-separated strings.
 
 supplied with the AUTH command, the remaining prompts are used to obtain more
 data. Each response from the client may be a list of NUL-separated strings.
 

-.cindex "&$authenticated_id$&"
+.vindex "&$authenticated_id$&"

 Once a sufficient number of data strings have been received,
 &%server_condition%& is expanded. If the expansion is forced to fail,
 authentication fails. Any other expansion failure causes a temporary error code
 Once a sufficient number of data strings have been received,
 &%server_condition%& is expanded. If the expansion is forced to fail,
 authentication fails. Any other expansion failure causes a temporary error code


@@ -22925,7 +23447,7 @@ There are good and bad examples at the end of the next section.
 
 
 
 
 
 

-.section "The PLAIN authentication mechanism"
+.section "The PLAIN authentication mechanism" "SECID172"

 .cindex "PLAIN authentication mechanism"
 .cindex "authentication" "PLAIN mechanism"
 .cindex "binary zero" "in &(plaintext)& authenticator"
 .cindex "PLAIN authentication mechanism"
 .cindex "authentication" "PLAIN mechanism"
 .cindex "binary zero" "in &(plaintext)& authenticator"


@@ -23007,7 +23529,7 @@ always fails if its second argument is empty. However, the second way of
 writing the test makes the logic clearer.
 
 
 writing the test makes the logic clearer.
 
 

-.section "The LOGIN authentication mechanism"
+.section "The LOGIN authentication mechanism" "SECID173"

 .cindex "LOGIN authentication mechanism"
 .cindex "authentication" "LOGIN mechanism"
 The LOGIN authentication mechanism is not documented in any RFC, but is in use
 .cindex "LOGIN authentication mechanism"
 .cindex "authentication" "LOGIN mechanism"
 The LOGIN authentication mechanism is not documented in any RFC, but is in use


@@ -23052,7 +23574,7 @@ LDAP level, the password is an uninterpreted string.
 
 
 
 
 
 

-.section "Support for different kinds of authentication"
+.section "Support for different kinds of authentication" "SECID174"

 A number of string expansion features are provided for the purpose of
 interfacing to different ways of user authentication. These include checking
 traditionally encrypted passwords from &_/etc/passwd_& (or equivalent), PAM,
 A number of string expansion features are provided for the purpose of
 interfacing to different ways of user authentication. These include checking
 traditionally encrypted passwords from &_/etc/passwd_& (or equivalent), PAM,


@@ -23062,7 +23584,7 @@ Radius, &%ldapauth%&, &'pwcheck'&, and &'saslauthd'&. For details see section
 
 
 
 
 
 

-.section "Using plaintext in a client"
+.section "Using plaintext in a client" "SECID175"

 .cindex "options" "&(plaintext)& authenticator (client)"
 The &(plaintext)& authenticator has two client options:
 
 .cindex "options" "&(plaintext)& authenticator (client)"
 The &(plaintext)& authenticator has two client options:
 


@@ -23123,7 +23645,7 @@ prompts.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "The cram_md5 authenticator"
+.chapter "The cram_md5 authenticator" "CHID9"

 .scindex IIDcramauth1 "&(cram_md5)& authenticator"
 .scindex IIDcramauth2 "authenticators" "&(cram_md5)&"
 .cindex "CRAM-MD5 authentication mechanism"
 .scindex IIDcramauth1 "&(cram_md5)& authenticator"
 .scindex IIDcramauth2 "authenticators" "&(cram_md5)&"
 .cindex "CRAM-MD5 authentication mechanism"


@@ -23137,7 +23659,7 @@ secure than &(plaintext)&. However, the downside is that the secret has to be
 available in plain text at either end.
 
 
 available in plain text at either end.
 
 

-.section "Using cram_md5 as a server"
+.section "Using cram_md5 as a server" "SECID176"

 .cindex "options" "&(cram_md5)& authenticator (server)"
 This authenticator has one server option, which must be set to configure the
 authenticator as a server:
 .cindex "options" "&(cram_md5)& authenticator (server)"
 This authenticator has one server option, which must be set to configure the
 authenticator as a server:


@@ -23167,22 +23689,23 @@ fixed_cram:
   server_secret = ${if eq{$auth1}{ph10}{secret}fail}
   server_set_id = $auth1
 .endd
   server_secret = ${if eq{$auth1}{ph10}{secret}fail}
   server_set_id = $auth1
 .endd

-.cindex "&$authenticated_id$&"
+.vindex "&$authenticated_id$&"

 If authentication succeeds, the setting of &%server_set_id%& preserves the user
 If authentication succeeds, the setting of &%server_set_id%& preserves the user

-name in &$authenticated_id$&. A more tyical configuration might look up the
+name in &$authenticated_id$&. A more typical configuration might look up the

 secret string in a file, using the user name as the key. For example:
 .code
 lookup_cram:
   driver = cram_md5
   public_name = CRAM-MD5
 secret string in a file, using the user name as the key. For example:
 .code
 lookup_cram:
   driver = cram_md5
   public_name = CRAM-MD5

-  server_secret = ${lookup{$auth1}lsearch{/etc/authpwd}{$value}fail}
+  server_secret = ${lookup{$auth1}lsearch{/etc/authpwd}\
+                  {$value}fail}

   server_set_id = $auth1
 .endd
 Note that this expansion explicitly forces failure if the lookup fails
   server_set_id = $auth1
 .endd
 Note that this expansion explicitly forces failure if the lookup fails

-because &$1$& contains an unknown user name.
+because &$auth1$& contains an unknown user name.

 
 
 
 

-.section "Using cram_md5 as a client"
+.section "Using cram_md5 as a client" "SECID177"

 .cindex "options" "&(cram_md5)& authenticator (client)"
 When used as a client, the &(cram_md5)& authenticator has two options:
 
 .cindex "options" "&(cram_md5)& authenticator (client)"
 When used as a client, the &(cram_md5)& authenticator has two options:
 


@@ -23198,8 +23721,8 @@ This option must be set for the authenticator to work as a client. Its value is
 expanded and the result used as the secret string when computing the response.
 
 
 expanded and the result used as the secret string when computing the response.
 
 

-.cindex "&$host$&"
-.cindex "&$host_address$&"
+.vindex "&$host$&"
+.vindex "&$host_address$&"

 Different user names and secrets can be used for different servers by referring
 to &$host$& or &$host_address$& in the options. Forced failure of either
 expansion string is treated as an indication that this authenticator is not
 Different user names and secrets can be used for different servers by referring
 to &$host$& or &$host_address$& in the options. Forced failure of either
 expansion string is treated as an indication that this authenticator is not


@@ -23224,7 +23747,7 @@ fixed_cram:
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "The cyrus_sasl authenticator"
+.chapter "The cyrus_sasl authenticator" "CHID10"

 .scindex IIDcyrauth1 "&(cyrus_sasl)& authenticator"
 .scindex IIDcyrauth2 "authenticators" "&(cyrus_sasl)&"
 .cindex "Cyrus" "SASL library"
 .scindex IIDcyrauth1 "&(cyrus_sasl)& authenticator"
 .scindex IIDcyrauth2 "authenticators" "&(cyrus_sasl)&"
 .cindex "Cyrus" "SASL library"


@@ -23249,7 +23772,6 @@ user, and that the Cyrus SASL library has no way of escalating privileges
 by default. You may also find you need to set environment variables,
 depending on the driver you are using.
 
 by default. You may also find you need to set environment variables,
 depending on the driver you are using.
 

-.new

 The application name provided by Exim is &"exim"&, so various SASL options may
 be set in &_exim.conf_& in your SASL directory. If you are using GSSAPI for
 Kerberos, note that because of limitations in the GSSAPI interface,
 The application name provided by Exim is &"exim"&, so various SASL options may
 be set in &_exim.conf_& in your SASL directory. If you are using GSSAPI for
 Kerberos, note that because of limitations in the GSSAPI interface,


@@ -23259,10 +23781,9 @@ implementation. For example, for Heimdal, the environment variable KRB5_KTNAME
 may be set to point to an alternative keytab file. Exim will pass this
 variable through from its own inherited environment when started as root or the
 Exim user. The keytab file needs to be readable by the Exim user.
 may be set to point to an alternative keytab file. Exim will pass this
 variable through from its own inherited environment when started as root or the
 Exim user. The keytab file needs to be readable by the Exim user.

-.wen

 
 
 
 

-.section "Using cyrus_sasl as a server"
+.section "Using cyrus_sasl as a server" "SECID178"

 The &(cyrus_sasl)& authenticator has four private options. It puts the username
 (on a successful authentication) into &$auth1$&. For compatibility with
 previous releases of Exim, the username is also placed in &$1$&. However, the
 The &(cyrus_sasl)& authenticator has four private options. It puts the username
 (on a successful authentication) into &$auth1$&. For compatibility with
 previous releases of Exim, the username is also placed in &$1$&. However, the


@@ -23271,16 +23792,17 @@ confusion in string expansions that also use numeric variables for other
 things.
 
 
 things.
 
 

-.option server_hostname cyrus_sasl string&!! &`$primary_hostname`&
-This option selects the hostname that is used when communicating with
-the library. It is up to the underlying SASL plug-in what it does with
-this data.
+.option server_hostname cyrus_sasl string&!! "see below"
+This option selects the hostname that is used when communicating with the
+library. The default value is &`$primary_hostname`&. It is up to the underlying
+SASL plug-in what it does with this data.

 
 
 
 

-.option server_mech cyrus_sasl string &`public_name`&
-This option selects the authentication mechanism this driver should
-use. It allows you to use a different underlying mechanism from the
-advertised name. For example:
+.option server_mech cyrus_sasl string "see below"
+This option selects the authentication mechanism this driver should use. The
+default is the value of the generic &%public_name%& option. This option allows
+you to use a different underlying mechanism from the advertised name. For
+example:

 .code
 sasl:
   driver = cyrus_sasl
 .code
 sasl:
   driver = cyrus_sasl


@@ -23323,7 +23845,6 @@ but it is present in many binary distributions.
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////

-.new

 .chapter "The dovecot authenticator" "CHAPdovecot"
 .scindex IIDdcotauth1 "&(dovecot)& authenticator"
 .scindex IIDdcotauth2 "authenticators" "&(dovecot)&"
 .chapter "The dovecot authenticator" "CHAPdovecot"
 .scindex IIDdcotauth1 "&(dovecot)& authenticator"
 .scindex IIDdcotauth2 "authenticators" "&(dovecot)&"


@@ -23344,22 +23865,22 @@ dovecot_plain:
   driver = dovecot
   public_name = PLAIN
   server_socket = /var/run/dovecot/auth-client
   driver = dovecot
   public_name = PLAIN
   server_socket = /var/run/dovecot/auth-client

-  server_setid = $auth1
+  server_set_id = $auth1

 
 dovecot_ntlm:
   driver = dovecot
   public_name = NTLM
   server_socket = /var/run/dovecot/auth-client
 
 dovecot_ntlm:
   driver = dovecot
   public_name = NTLM
   server_socket = /var/run/dovecot/auth-client

-  server_setid = $auth1
+  server_set_id = $auth1

 .endd
 If the SMTP connection is encrypted, or if &$sender_host_address$& is equal to
 &$received_ip_address$& (that is, the connection is local), the &"secured"&
 option is passed in the Dovecot authentication command. If, for a TLS
 connection, a client certificate has been verified, the &"valid-client-cert"&
 .endd
 If the SMTP connection is encrypted, or if &$sender_host_address$& is equal to
 &$received_ip_address$& (that is, the connection is local), the &"secured"&
 option is passed in the Dovecot authentication command. If, for a TLS
 connection, a client certificate has been verified, the &"valid-client-cert"&

-option is passed.
+option is passed. When authentication succeeds, the identity of the user
+who authenticated is placed in &$auth1$&.

 .ecindex IIDdcotauth1
 .ecindex IIDdcotauth2
 .ecindex IIDdcotauth1
 .ecindex IIDdcotauth2

-.wen

 
 
 . ////////////////////////////////////////////////////////////////////////////
 
 
 . ////////////////////////////////////////////////////////////////////////////


@@ -23394,7 +23915,7 @@ Encryption is used to protect the password in transit.
 
 
 
 
 
 

-.section "Using spa as a server"
+.section "Using spa as a server" "SECID179"

 .cindex "options" "&(spa)& authenticator (server)"
 The &(spa)& authenticator has just one server option:
 
 .cindex "options" "&(spa)& authenticator (server)"
 The &(spa)& authenticator has just one server option:
 


@@ -23420,7 +23941,7 @@ failure causes a temporary error code to be returned.
 
 
 
 
 
 

-.section "Using spa as a client"
+.section "Using spa as a client" "SECID180"

 .cindex "options" "&(spa)& authenticator (client)"
 The &(spa)& authenticator has the following client options:
 
 .cindex "options" "&(spa)& authenticator (client)"
 The &(spa)& authenticator has the following client options:
 


@@ -23491,7 +24012,8 @@ in order to get TLS to work.
 
 
 
 
 
 

-.section "Support for the legacy &""ssmtp""& (aka &""smtps""&) protocol"
+.section "Support for the legacy &""ssmtp""& (aka &""smtps""&) protocol" &&&
+         "SECID284"

 .cindex "ssmtp protocol"
 .cindex "smtps protocol"
 .cindex "SMTP" "ssmtp protocol"
 .cindex "ssmtp protocol"
 .cindex "smtps protocol"
 .cindex "SMTP" "ssmtp protocol"


@@ -23502,7 +24024,7 @@ waiting for a STARTTLS command from the client using the standard SMTP
 port. The protocol was called &"ssmtp"& or &"smtps"&, and port 465 was
 allocated for this purpose.
 
 port. The protocol was called &"ssmtp"& or &"smtps"&, and port 465 was
 allocated for this purpose.
 

-This approach was abandoned when encrypted SMTP was standardised, but there are
+This approach was abandoned when encrypted SMTP was standardized, but there are

 still some legacy clients that use it. Exim supports these clients by means of
 the &%tls_on_connect_ports%& global option. Its value must be a list of port
 numbers; the most common use is expected to be:
 still some legacy clients that use it. Exim supports these clients by means of
 the &%tls_on_connect_ports%& global option. Its value must be a list of port
 numbers; the most common use is expected to be:


@@ -23549,7 +24071,7 @@ The &%tls_dhparam%& option is ignored, because early versions of GnuTLS had no
 facility for varying its Diffie-Hellman parameters. I understand that this has
 changed, but Exim has not been updated to provide this facility.
 .next
 facility for varying its Diffie-Hellman parameters. I understand that this has
 changed, but Exim has not been updated to provide this facility.
 .next

-.cindex "&$tls_peerdn$&"
+.vindex "&$tls_peerdn$&"

 Distinguished Name (DN) strings reported by the OpenSSL library use a slash for
 separating fields; GnuTLS uses commas, in accordance with RFC 2253. This
 affects the value of the &$tls_peerdn$& variable.
 Distinguished Name (DN) strings reported by the OpenSSL library use a slash for
 separating fields; GnuTLS uses commas, in accordance with RFC 2253. This
 affects the value of the &$tls_peerdn$& variable.


@@ -23557,7 +24079,7 @@ affects the value of the &$tls_peerdn$& variable.
 OpenSSL identifies cipher suites using hyphens as separators, for example:
 DES-CBC3-SHA. GnuTLS uses underscores, for example: RSA_ARCFOUR_SHA. What is
 more, OpenSSL complains if underscores are present in a cipher list. To make
 OpenSSL identifies cipher suites using hyphens as separators, for example:
 DES-CBC3-SHA. GnuTLS uses underscores, for example: RSA_ARCFOUR_SHA. What is
 more, OpenSSL complains if underscores are present in a cipher list. To make

-life simpler, Exim changes underscores to hyhens for OpenSSL and hyphens to
+life simpler, Exim changes underscores to hyphens for OpenSSL and hyphens to

 underscores for GnuTLS when processing lists of cipher suites in the
 &%tls_require_ciphers%& options (the global option and the &(smtp)& transport
 option).
 underscores for GnuTLS when processing lists of cipher suites in the
 &%tls_require_ciphers%& options (the global option and the &(smtp)& transport
 option).


@@ -23567,7 +24089,7 @@ sections &<<SECTreqciphssl>>& and &<<SECTreqciphgnu>>&.
 .endlist
 
 
 .endlist
 
 

-.section "GnuTLS parameter computation"
+.section "GnuTLS parameter computation" "SECID181"

 GnuTLS uses RSA and D-H parameters that may take a substantial amount of time
 to compute. It is unreasonable to re-compute them for every TLS session.
 Therefore, Exim keeps this data in a file in its spool directory, called
 GnuTLS uses RSA and D-H parameters that may take a substantial amount of time
 to compute. It is unreasonable to re-compute them for every TLS session.
 Therefore, Exim keeps this data in a file in its spool directory, called


@@ -23612,7 +24134,7 @@ stalling is removed.
 
 .section "Requiring specific ciphers in OpenSSL" "SECTreqciphssl"
 .cindex "TLS" "requiring specific ciphers (OpenSSL)"
 
 .section "Requiring specific ciphers in OpenSSL" "SECTreqciphssl"
 .cindex "TLS" "requiring specific ciphers (OpenSSL)"

-.cindex "&%tls_require_ciphers%&" "OpenSSL"
+.oindex "&%tls_require_ciphers%&" "OpenSSL"

 There is a function in the OpenSSL library that can be passed a list of cipher
 suites before the cipher negotiation takes place. This specifies which ciphers
 are acceptable. The list is colon separated and may contain names like
 There is a function in the OpenSSL library that can be passed a list of cipher
 suites before the cipher negotiation takes place. This specifies which ciphers
 are acceptable. The list is colon separated and may contain names like


@@ -23656,58 +24178,94 @@ not be moved to the end of the list.
 
 
 
 
 
 

-
-.section "Requiring specific ciphers in GnuTLS" "SECTreqciphgnu"
-.cindex "TLS" "requiring specific ciphers (GnuTLS)"
-.cindex "&%tls_require_ciphers%&" "GnuTLS"
-The GnuTLS library does not have a combined function like OpenSSL. Instead,
-it allows the caller to specify separate lists of key-exchange methods,
-main cipher algorithms, and MAC algorithms. Unfortunately, these lists are
-numerical, and the library does not have a function for turning names into
-numbers. Consequently, the list of recognized names has to be built into
-the application.
-
-At present, Exim permits only the list of main cipher algorithms to be
-changed. The &%tls_require_ciphers%& option is in the same format as for
-OpenSSL. Exim searches each item for the name of available algorithm. For
-example, if the list contains RSA_AES_SHA then AES is recognized.
-
-The cipher algorithms list starts out with a default set of algorithms. If
-the first item in &%tls_require_ciphers%& does &'not'& start with an
-exclamation mark, all the default items are deleted. Thus, only those specified
-can be used. If the first item in &%tls_require_ciphers%& &'does'& start with
-an exclamation mark, the defaults are left on the list.
+.section "Requiring specific ciphers or other parameters in GnuTLS" &&&
+         "SECTreqciphgnu"
+.cindex "GnuTLS" "specifying parameters for"
+.cindex "TLS" "specifying ciphers (GnuTLS)"
+.cindex "TLS" "specifying key exchange methods (GnuTLS)"
+.cindex "TLS" "specifying MAC algorithms (GnuTLS)"
+.cindex "TLS" "specifying protocols (GnuTLS)"
+.oindex "&%tls_require_ciphers%&" "GnuTLS"
+The GnuTLS library allows the caller to specify separate lists of permitted key
+exchange methods, main cipher algorithms, MAC algorithms, and protocols.
+Unfortunately, these lists are numerical, and the library does not have a
+function for turning names into numbers. Consequently, lists of recognized
+names have to be built into the application. The permitted key exchange
+methods, ciphers, and MAC algorithms may be used in any combination to form a
+cipher suite. This is unlike OpenSSL, where complete cipher suite names are
+passed to its control function.
+
+For compatibility with OpenSSL, the &%tls_require_ciphers%& option can be set
+to complete cipher suite names such as RSA_ARCFOUR_SHA, but for GnuTLS this
+option controls only the cipher algorithms. Exim searches each item in the
+list for the name of an available algorithm. For example, if the list
+contains RSA_AES_SHA, then AES is recognized, and the behaviour is exactly
+the same as if just AES were given.
+
+.oindex "&%gnutls_require_kx%&"
+.oindex "&%gnutls_require_mac%&"
+.oindex "&%gnutls_require_protocols%&"
+There are additional options called &%gnutls_require_kx%&,
+&%gnutls_require_mac%&, and &%gnutls_require_protocols%& that can be used to
+restrict the key exchange methods, MAC algorithms, and protocols, respectively.
+These options are ignored if OpenSSL is in use.
+
+All four options are available as global options, controlling how Exim
+behaves as a server, and also as options of the &(smtp)& transport, controlling
+how Exim behaves as a client. All the values are string expanded. After
+expansion, the values must be colon-separated lists, though the separator
+can be changed in the usual way.
+
+Each of the four lists starts out with a default set of algorithms. If the
+first item in a list does &'not'& start with an exclamation mark, all the
+default items are deleted. In this case, only those that are explicitly
+specified can be used. If the first item in a list &'does'& start with an
+exclamation mark, the defaults are left on the list.

 
 Then, any item that starts with an exclamation mark causes the relevant
 
 Then, any item that starts with an exclamation mark causes the relevant

-algorithms to be removed from the list, and any item that does not start
-with an exclamation mark causes the relevant algorithms to be added to the
-list. Thus,
+entry to be removed from the list, and any item that does not start with an
+exclamation mark causes a new entry to be added to the list. Unrecognized
+items in the list are ignored. Thus:

 .code
 .code

-tls_require_ciphers = !RSA_ARCFOUR_SHA
+tls_require_ciphers = !ARCFOUR

 .endd
 .endd

-allows all the defaults except those that use ARCFOUR, whereas
+allows all the defaults except ARCFOUR, whereas

 .code
 tls_require_ciphers = AES : 3DES
 .endd
 .code
 tls_require_ciphers = AES : 3DES
 .endd

-allows only cipher suites that use AES and 3DES. The currently recognized
-algorithms are: AES_256, AES_128, AES (both of the preceding), 3DES, and
-ARCFOUR_128. Unrecognized algorithms are ignored. In a server, the order of the
-list is unimportant; the server will advertise the availability of all the
-relevant cipher suites. However, in a client, the order of the list specifies a
-preference order for the algorithms. The first one in the client's list that is
+allows only cipher suites that use AES or 3DES.
+
+For &%tls_require_ciphers%& the recognized names are AES_256, AES_128, AES
+(both of the preceding), 3DES, ARCFOUR_128, ARCFOUR_40, and ARCFOUR (both of
+the preceding). The default list does not contain all of these; it just has
+AES_256, AES_128, 3DES, and ARCFOUR_128.
+
+For &%gnutls_require_kx%&, the recognized names are DHE_RSA, RSA (which
+includes DHE_RSA), DHE_DSS, and DHE (which includes both DHE_RSA and
+DHE_DSS). The default list contains RSA, DHE_DSS, DHE_RSA.
+
+For &%gnutls_require_mac%&, the recognized names are SHA (synonym SHA1), and
+MD5. The default list contains SHA, MD5.
+
+For &%gnutls_require_protocols%&, the recognized names are TLS1 and SSL3.
+The default list contains TLS1, SSL3.
+
+In a server, the order of items in these lists is unimportant. The server
+advertises the availability of all the relevant cipher suites. However, in a
+client, the order in the &%tls_require_ciphers%& list specifies a preference
+order for the cipher algorithms. The first one in the client's list that is

 also advertised by the server is tried first. The default order is as listed
 above.
 
 
 
 also advertised by the server is tried first. The default order is as listed
 above.
 
 
 

-
-.section "Configuring an Exim server to use TLS"
+.section "Configuring an Exim server to use TLS" "SECID182"

 .cindex "TLS" "configuring an Exim server"
 When Exim has been built with TLS support, it advertises the availability of
 the STARTTLS command to client hosts that match &%tls_advertise_hosts%&,
 but not to any others. The default value of this option is unset, which means
 that STARTTLS is not advertised at all. This default is chosen because you
 .cindex "TLS" "configuring an Exim server"
 When Exim has been built with TLS support, it advertises the availability of
 the STARTTLS command to client hosts that match &%tls_advertise_hosts%&,
 but not to any others. The default value of this option is unset, which means
 that STARTTLS is not advertised at all. This default is chosen because you

-need to set some other options in order to make TLS avaliable, and also it is
+need to set some other options in order to make TLS available, and also it is

 sensible for systems that want to use TLS only as a client.
 
 If a client issues a STARTTLS command and there is some configuration
 sensible for systems that want to use TLS only as a client.
 
 If a client issues a STARTTLS command and there is some configuration


@@ -23774,24 +24332,25 @@ forced to fail, Exim behaves as if the option is not set.
 
 .cindex "cipher" "logging"
 .cindex "log" "TLS cipher"
 
 .cindex "cipher" "logging"
 .cindex "log" "TLS cipher"

-.cindex "&$tls_cipher$&"
+.vindex "&$tls_cipher$&"

 The variable &$tls_cipher$& is set to the cipher suite that was negotiated for
 an incoming TLS connection. It is included in the &'Received:'& header of an
 incoming message (by default &-- you can, of course, change this), and it is
 also included in the log line that records a message's arrival, keyed by
 &"X="&, unless the &%tls_cipher%& log selector is turned off. The &%encrypted%&
 condition can be used to test for specific cipher suites in ACLs.
 The variable &$tls_cipher$& is set to the cipher suite that was negotiated for
 an incoming TLS connection. It is included in the &'Received:'& header of an
 incoming message (by default &-- you can, of course, change this), and it is
 also included in the log line that records a message's arrival, keyed by
 &"X="&, unless the &%tls_cipher%& log selector is turned off. The &%encrypted%&
 condition can be used to test for specific cipher suites in ACLs.

-
-The ACLs that run for subsequent SMTP commands can check the name of the cipher
-suite and vary their actions accordingly. The cipher suite names are those used
-by OpenSSL. These may differ from the names used elsewhere. For example,
-OpenSSL uses the name DES-CBC3-SHA for the cipher suite which in other contexts
-is known as TLS_RSA_WITH_3DES_EDE_CBC_SHA. Check the OpenSSL
+&new("(For outgoing SMTP deliveries, &$tls_cipher$& is reset &-- see section
+&<<SECID185>>&.)")
+
+Once TLS has been established, the ACLs that run for subsequent SMTP commands
+can check the name of the cipher suite and vary their actions accordingly. The
+cipher suite names vary, depending on which TLS library is being used. For
+example, OpenSSL uses the name DES-CBC3-SHA for the cipher suite which in other
+contexts is known as TLS_RSA_WITH_3DES_EDE_CBC_SHA. Check the OpenSSL or GnuTLS

 documentation for more details.
 
 
 documentation for more details.
 
 

-
-.section "Requesting and verifying client certificates"
+.section "Requesting and verifying client certificates" "SECID183"

 .cindex "certificate" "verification of client"
 .cindex "TLS" "client certificate verification"
 If you want an Exim server to request a certificate when negotiating a TLS
 .cindex "certificate" "verification of client"
 .cindex "TLS" "client certificate verification"
 If you want an Exim server to request a certificate when negotiating a TLS


@@ -23826,7 +24385,7 @@ fact that no certificate was verified, and vary their actions accordingly. For
 example, you can insist on a certificate before accepting a message for
 relaying, but not when the message is destined for local delivery.
 
 example, you can insist on a certificate before accepting a message for
 relaying, but not when the message is destined for local delivery.
 

-.cindex "&$tls_peerdn$&"
+.vindex "&$tls_peerdn$&"

 When a client supplies a certificate (whether it verifies or not), the value of
 the Distinguished Name of the certificate is made available in the variable
 &$tls_peerdn$& during subsequent processing of the message.
 When a client supplies a certificate (whether it verifies or not), the value of
 the Distinguished Name of the certificate is made available in the variable
 &$tls_peerdn$& during subsequent processing of the message.


@@ -23839,7 +24398,7 @@ Because it is often a long text string, it is not included in the log line or
 certificate is supplied, &$tls_peerdn$& is empty.
 
 
 certificate is supplied, &$tls_peerdn$& is empty.
 
 

-.section "Revoked certificates"
+.section "Revoked certificates" "SECID184"

 .cindex "TLS" "revoked certificates"
 .cindex "revocation list"
 .cindex "certificate" "revocation list"
 .cindex "TLS" "revoked certificates"
 .cindex "revocation list"
 .cindex "certificate" "revocation list"


@@ -23851,7 +24410,7 @@ of the option is expanded and must then be the name of a file that contains a
 CRL in PEM format.
 
 
 CRL in PEM format.
 
 

-.section "Configuring an Exim client to use TLS"
+.section "Configuring an Exim client to use TLS" "SECID185"

 .cindex "cipher" "logging"
 .cindex "log" "TLS cipher"
 .cindex "log" "distinguished name"
 .cindex "cipher" "logging"
 .cindex "log" "TLS cipher"
 .cindex "log" "distinguished name"


@@ -23886,7 +24445,6 @@ negotiation fails, Exim closes the current connection (because it is in an
 unknown state), opens a new one to the same host, and then tries the delivery
 unencrypted.
 
 unknown state), opens a new one to the same host, and then tries the delivery
 unencrypted.
 

-

 The &%tls_certificate%& and &%tls_privatekey%& options of the &(smtp)&
 transport provide the client with a certificate, which is passed to the server
 if it requests it. If the server is Exim, it will request a certificate only if
 The &%tls_certificate%& and &%tls_privatekey%& options of the &(smtp)&
 transport provide the client with a certificate, which is passed to the server
 if it requests it. If the server is Exim, it will request a certificate only if


@@ -23908,13 +24466,21 @@ list of permitted cipher suites. If either of these checks fails, delivery to
 the current host is abandoned, and the &(smtp)& transport tries to deliver to
 alternative hosts, if any.
 
 the current host is abandoned, and the &(smtp)& transport tries to deliver to
 alternative hosts, if any.
 

-.cindex "&$host$&"
-.cindex "&$host_address$&"
+.vindex "&$host$&"
+.vindex "&$host_address$&"

 All the TLS options in the &(smtp)& transport are expanded before use, with
 &$host$& and &$host_address$& containing the name and address of the server to
 which the client is connected. Forced failure of an expansion causes Exim to
 behave as if the relevant option were unset.
 
 All the TLS options in the &(smtp)& transport are expanded before use, with
 &$host$& and &$host_address$& containing the name and address of the server to
 which the client is connected. Forced failure of an expansion causes Exim to
 behave as if the relevant option were unset.
 

+.vindex &$tls_cipher$&
+.vindex &$tls_peerdn$&
+Before an SMTP connection is established, the &$tls_cipher$& and &$tls_peerdn$&
+variables are emptied. (Until the first connection, they contain the values
+that were set when the message was received.) If STARTTLS is subsequently
+successfully obeyed, these variables are set to the relevant values for the
+outgoing connection.
+

 
 
 .section "Multiple messages on the same encrypted TCP/IP connection" &&&
 
 
 .section "Multiple messages on the same encrypted TCP/IP connection" &&&


@@ -23973,7 +24539,7 @@ Some sample programs taken from the book are available from
 .endd
 
 
 .endd
 
 

-.section "Certificate chains"
+.section "Certificate chains" "SECID186"

 The file named by &%tls_certificate%& may contain more than one
 certificate. This is useful in the case where the certificate that is being
 sent is validated by an intermediate certificate which the other end does
 The file named by &%tls_certificate%& may contain more than one
 certificate. This is useful in the case where the certificate that is being
 sent is validated by an intermediate certificate which the other end does


@@ -23988,7 +24554,7 @@ root certificate along with the rest makes it available for the user to
 install if the receiving end is a client MUA that can interact with a user.
 
 
 install if the receiving end is a client MUA that can interact with a user.
 
 

-.section "Self-signed certificates"
+.section "Self-signed certificates" "SECID187"

 .cindex "certificate" "self-signed"
 You can create a self-signed certificate using the &'req'& command provided
 with OpenSSL, like this:
 .cindex "certificate" "self-signed"
 You can create a self-signed certificate using the &'req'& command provided
 with OpenSSL, like this:


@@ -24038,7 +24604,6 @@ name, terminated by a colon. Here is a complete ACL section that contains just
 one very small ACL:
 .code
 begin acl
 one very small ACL:
 .code
 begin acl

-

 small_acl:
   accept   hosts = one.host.only
 .endd
 small_acl:
   accept   hosts = one.host.only
 .endd


@@ -24055,7 +24620,7 @@ a realistic ACL for checking RCPT commands. This is discussed in chapter
 &<<CHAPdefconfil>>&.
 
 
 &<<CHAPdefconfil>>&.
 
 

-.section "Testing ACLs"
+.section "Testing ACLs" "SECID188"

 The &%-bh%& command line option provides a way of testing your ACL
 configuration locally by running a fake SMTP session with which you interact.
 The host &'relay-test.mail-abuse.org'& provides a service for checking your
 The &%-bh%& command line option provides a way of testing your ACL
 configuration locally by running a fake SMTP session with which you interact.
 The host &'relay-test.mail-abuse.org'& provides a service for checking your


@@ -24063,7 +24628,7 @@ relaying configuration (see section &<<SECTcheralcon>>& for more details).
 
 
 
 
 
 

-.section "Specifying when ACLs are used"
+.section "Specifying when ACLs are used" "SECID189"

 .cindex "&ACL;" "options for specifying"
 In order to cause an ACL to be used, you have to name it in one of the relevant
 options in the main part of the configuration. These options are:
 .cindex "&ACL;" "options for specifying"
 In order to cause an ACL to be used, you have to name it in one of the relevant
 options in the main part of the configuration. These options are:


@@ -24074,32 +24639,33 @@ options in the main part of the configuration. These options are:
 .cindex "HELO" "ACL for"
 .cindex "EHLO" "ACL for"
 .cindex "MAIL" "ACL for"
 .cindex "HELO" "ACL for"
 .cindex "EHLO" "ACL for"
 .cindex "MAIL" "ACL for"

-.cindex "QUIT" "ACL for"
+.cindex "QUIT, ACL for"

 .cindex "RCPT" "ACL for"
 .cindex "RCPT" "ACL for"

-.cindex "STARTTLS" "ACL for"
+.cindex "STARTTLS, ACL for"

 .cindex "VRFY" "ACL for"
 .cindex "VRFY" "ACL for"

-.cindex "SMTP connection" "ACL for"
-.cindex "non-smtp message" "ACLs for"
-.cindex "MIME parts" "ACL for"
+.cindex "SMTP" "connection, ACL for"
+.cindex "non-SMTP messages" "ACLs for"
+.cindex "MIME content scanning" "ACL for"

 
 .table2 140pt
 
 .table2 140pt

-.row &~&%acl_not_smtp%&         "ACL for non-SMTP messages"
-.row &~&%acl_not_smtp_mime%&    "ACL for non-SMTP MIME parts"
-.row &~&%acl_not_smtp_start%&   "ACL at start of non-SMTP message"
-.row &~&%acl_smtp_auth%&        "ACL for AUTH"
-.row &~&%acl_smtp_connect%&     "ACL for start of SMTP connection"
-.row &~&%acl_smtp_data%&        "ACL after DATA is complete"
-.row &~&%acl_smtp_etrn%&        "ACL for ETRN"
-.row &~&%acl_smtp_expn%&        "ACL for EXPN"
-.row &~&%acl_smtp_helo%&        "ACL for HELO or EHLO"
-.row &~&%acl_smtp_mail%&        "ACL for MAIL"
-.row &~&%acl_smtp_mailauth%&    "ACL for the AUTH parameter of MAIL"
-.row &~&%acl_smtp_mime%&        "ACL for content-scanning MIME parts"
-.row &~&%acl_smtp_predata%&     "ACL at start of DATA command"
-.row &~&%acl_smtp_quit%&        "ACL for QUIT"
-.row &~&%acl_smtp_rcpt%&        "ACL for RCPT"
-.row &~&%acl_smtp_starttls%&    "ACL for STARTTLS"
-.row &~&%acl_smtp_vrfy%&        "ACL for VRFY"
+.irow &%acl_not_smtp%&         "ACL for non-SMTP messages"
+.irow &%acl_not_smtp_mime%&    "ACL for non-SMTP MIME parts"
+.irow &%acl_not_smtp_start%&   "ACL at start of non-SMTP message"
+.irow &%acl_smtp_auth%&        "ACL for AUTH"
+.irow &%acl_smtp_connect%&     "ACL for start of SMTP connection"
+.irow &%acl_smtp_data%&        "ACL after DATA is complete"
+.irow &%acl_smtp_etrn%&        "ACL for ETRN"
+.irow &%acl_smtp_expn%&        "ACL for EXPN"
+.irow &%acl_smtp_helo%&        "ACL for HELO or EHLO"
+.irow &%acl_smtp_mail%&        "ACL for MAIL"
+.irow &%acl_smtp_mailauth%&    "ACL for the AUTH parameter of MAIL"
+.irow &%acl_smtp_mime%&        "ACL for content-scanning MIME parts"
+.irow &new(&%acl_smtp_notquit%&)  "ACL for non-QUIT terminations"
+.irow &%acl_smtp_predata%&     "ACL at start of DATA command"
+.irow &%acl_smtp_quit%&        "ACL for QUIT"
+.irow &%acl_smtp_rcpt%&        "ACL for RCPT"
+.irow &%acl_smtp_starttls%&    "ACL for STARTTLS"
+.irow &%acl_smtp_vrfy%&        "ACL for VRFY"

 .endtable
 
 For example, if you set
 .endtable
 
 For example, if you set


@@ -24115,8 +24681,8 @@ trying to deliver the message. It is therefore recommended that you do as much
 testing as possible at RCPT time.
 
 
 testing as possible at RCPT time.
 
 

-.section "The non-SMTP ACLs"
-.cindex "non-smtp message" "ACLs for"
+.section "The non-SMTP ACLs" "SECID190"
+.cindex "non-SMTP messages" "ACLs for"

 The non-SMTP ACLs apply to all non-interactive incoming messages, that is, they
 apply to batched SMTP as well as to non-SMTP messages. (Batched SMTP is not
 really SMTP.) Many of the ACL conditions (for example, host tests, and tests on
 The non-SMTP ACLs apply to all non-interactive incoming messages, that is, they
 apply to batched SMTP as well as to non-SMTP messages. (Batched SMTP is not
 really SMTP.) Many of the ACL conditions (for example, host tests, and tests on


@@ -24129,11 +24695,12 @@ in any of these ACLs.
 
 The &%acl_not_smtp_start%& ACL is run right at the start of receiving a
 non-SMTP message, before any of the message has been read. (This is the
 
 The &%acl_not_smtp_start%& ACL is run right at the start of receiving a
 non-SMTP message, before any of the message has been read. (This is the

-analogue of the &%acl_smtp_predata%& ACL for SMTP input.) The result of this
-ACL is ignored; it cannot be used to reject a message. If you really need to,
-you could set a value in an ACL variable here and reject based on that in the
-&%acl_not_smtp%& ACL. However, this ACL can be used to set controls, and in
-particular, it can be used to set
+analogue of the &%acl_smtp_predata%& ACL for SMTP input.) In the case of
+batched SMTP input, it runs after the DATA command has been reached. The
+result of this ACL is ignored; it cannot be used to reject a message. If you
+really need to, you could set a value in an ACL variable here and reject based
+on that in the &%acl_not_smtp%& ACL. However, this ACL can be used to set
+controls, and in particular, it can be used to set

 .code
 control = suppress_local_fixups
 .endd
 .code
 control = suppress_local_fixups
 .endd


@@ -24148,10 +24715,9 @@ kind of rejection is treated as permanent, because there is no way of sending a
 temporary error for these kinds of message.
 
 
 temporary error for these kinds of message.
 
 

-.section "The SMTP connect ACL"
-.new
-.cindex "SMTP connection" "ACL for"
-.cindex &%smtp_banner%&
+.section "The SMTP connect ACL" "SECID191"
+.cindex "SMTP" "connection, ACL for"
+.oindex &%smtp_banner%&

 The ACL test specified by &%acl_smtp_connect%& happens at the start of an SMTP
 session, after the test specified by &%host_reject_connection%& (which is now
 an anomaly) and any TCP Wrappers testing (if configured). If the connection is
 The ACL test specified by &%acl_smtp_connect%& happens at the start of an SMTP
 session, after the test specified by &%host_reject_connection%& (which is now
 an anomaly) and any TCP Wrappers testing (if configured). If the connection is


@@ -24160,7 +24726,7 @@ the message override the banner message that is otherwise specified by the
 &%smtp_banner%& option.
 
 
 &%smtp_banner%& option.
 
 

-.section "The EHLO/HELO ACL"
+.section "The EHLO/HELO ACL" "SECID192"

 .cindex "EHLO" "ACL for"
 .cindex "HELO" "ACL for"
 The ACL test specified by &%acl_smtp_helo%& happens when the client issues an
 .cindex "EHLO" "ACL for"
 .cindex "HELO" "ACL for"
 The ACL test specified by &%acl_smtp_helo%& happens when the client issues an


@@ -24175,10 +24741,9 @@ modifier, the message may not contain more than one line (it will be truncated
 at the first newline and a panic logged if it does). Such a message cannot
 affect the EHLO options that are listed on the second and subsequent lines of
 an EHLO response.
 at the first newline and a panic logged if it does). Such a message cannot
 affect the EHLO options that are listed on the second and subsequent lines of
 an EHLO response.

-.wen

 
 
 
 

-.section "The DATA ACLs"
+.section "The DATA ACLs" "SECID193"

 .cindex "DATA" "ACLs for"
 Two ACLs are associated with the DATA command, because it is two-stage
 command, with two responses being sent to the client.
 .cindex "DATA" "ACLs for"
 Two ACLs are associated with the DATA command, because it is two-stage
 command, with two responses being sent to the client.


@@ -24204,13 +24769,13 @@ and try again later, but that is their problem, though it does waste some of
 your resources.
 
 
 your resources.
 
 

-.section "The SMTP MIME ACL"
+.section "The SMTP MIME ACL" "SECID194"

 The &%acl_smtp_mime%& option is available only when Exim is compiled with the
 content-scanning extension. For details, see chapter &<<CHAPexiscan>>&.
 
 
 .section "The QUIT ACL" "SECTQUITACL"
 The &%acl_smtp_mime%& option is available only when Exim is compiled with the
 content-scanning extension. For details, see chapter &<<CHAPexiscan>>&.
 
 
 .section "The QUIT ACL" "SECTQUITACL"

-.cindex "QUIT" "ACL for"
+.cindex "QUIT, ACL for"

 The ACL for the SMTP QUIT command is anomalous, in that the outcome of the ACL
 does not affect the response code to QUIT, which is always 221. Thus, the ACL
 does not in fact control any access. For this reason, the only verbs that are
 The ACL for the SMTP QUIT command is anomalous, in that the outcome of the ACL
 does not affect the response code to QUIT, which is always 221. Thus, the ACL
 does not in fact control any access. For this reason, the only verbs that are


@@ -24236,7 +24801,43 @@ connection is closed. In these special cases, the QUIT ACL does not run.
 
 
 
 
 
 

-.section "Finding an ACL to use"
+.section "The not-QUIT ACL" "SECTNOTQUITACL"
+The not-QUIT ACL, specified by &%smtp_notquit_acl%&, is run in most cases when
+an SMTP session ends without sending QUIT. However, when Exim itself is is bad
+trouble, such as being unable to write to its log files, this ACL is not run,
+because it might try to do things (such as write to log files) that make the
+situation even worse.
+
+Like the QUIT ACL, this ACL is provided to make it possible to do customized
+logging or to gather statistics, and its outcome is ignored. The &%delay%&
+modifier is forbidden in this ACL, and the only permitted verbs are &%accept%&
+and &%warn%&.
+
+.vindex &$smtp_notquit_reason$&
+When the not-QUIT ACL is running, the variable &$smtp_notquit_reason$& is set
+to a string that indicates the reason for the termination of the SMTP
+connection. The possible values are:
+.table2
+.irow &`acl-drop`&                 "Another ACL issued a &%drop%& command"
+.irow &`bad-commands`&             "Too many unknown or non-mail commands"
+.irow &`command-timeout`&          "Timeout while reading SMTP commands"
+.irow &`connection-lost`&          "The SMTP connection has been lost"
+.irow &`data-timeout`&             "Timeout while reading message data"
+.irow &`local-scan-error`&         "The &[local_scan()]& function crashed"
+.irow &`local-scan-timeout`&       "The &[local_scan()]& function timed out"
+.irow &`signal-exit`&              "SIGTERM or SIGINT"
+.irow &`synchronization-error`&    "SMTP synchronization error"
+.irow &`tls-failed`&               "TLS failed to start"
+.endtable
+In most cases when an SMTP connection is closed without having received QUIT,
+Exim sends an SMTP response message before actually closing the connection.
+With the exception of the &`acl-drop`& case, the default message can be
+overridden by the &%message%& modifier in the not-QUIT ACL. In the case of a
+&%drop%& verb in another ACL, it is the message from the other ACL that is
+used.
+
+
+.section "Finding an ACL to use" "SECID195"

 .cindex "&ACL;" "finding which to use"
 The value of an &%acl_smtp_%&&'xxx'& option is expanded before use, so
 you can use different ACLs in different circumstances. For example,
 .cindex "&ACL;" "finding which to use"
 The value of an &%acl_smtp_%&&'xxx'& option is expanded before use, so
 you can use different ACLs in different circumstances. For example,


@@ -24288,7 +24889,7 @@ newlines; it is processed in the same way as an ACL that is read from a file.
 
 
 
 
 
 

-.section "ACL return codes"
+.section "ACL return codes" "SECID196"

 .cindex "&ACL;" "return codes"
 Except for the QUIT ACL, which does not affect the SMTP return code (see
 section &<<SECTQUITACL>>& above), the result of running an ACL is either
 .cindex "&ACL;" "return codes"
 Except for the QUIT ACL, which does not affect the SMTP return code (see
 section &<<SECTQUITACL>>& above), the result of running an ACL is either


@@ -24323,7 +24924,7 @@ recipients; it may create new recipients.
 
 
 
 
 
 

-.section "Unset ACL options"
+.section "Unset ACL options" "SECID197"

 .cindex "&ACL;" "unset options"
 The default actions when any of the &%acl_%&&'xxx'& options are unset are not
 all the same. &*Note*&: These defaults apply only when the relevant ACL is
 .cindex "&ACL;" "unset options"
 The default actions when any of the &%acl_%&&'xxx'& options are unset are not
 all the same. &*Note*&: These defaults apply only when the relevant ACL is


@@ -24348,13 +24949,13 @@ configuration file.
 
 
 
 
 
 

-.section "Data for message ACLs"
+.section "Data for message ACLs" "SECID198"

 .cindex "&ACL;" "data for message ACL"
 .cindex "&ACL;" "data for message ACL"

-.cindex &$domain$&
-.cindex &$local_part$&
-.cindex &$sender_address$&
-.cindex &$sender_host_address$&
-.cindex &$smtp_command$&
+.vindex &$domain$&
+.vindex &$local_part$&
+.vindex &$sender_address$&
+.vindex &$sender_host_address$&
+.vindex &$smtp_command$&

 When a MAIL or RCPT ACL, or either of the DATA ACLs, is running, the variables
 that contain information about the host and the message's sender (for example,
 &$sender_host_address$& and &$sender_address$&) are set, and can be used in ACL
 When a MAIL or RCPT ACL, or either of the DATA ACLs, is running, the variables
 that contain information about the host and the message's sender (for example,
 &$sender_host_address$& and &$sender_address$&) are set, and can be used in ACL


@@ -24367,15 +24968,15 @@ contain information about the host are set, but &$sender_address$& is not yet
 set. Section &<<SECTauthparamail>>& contains a discussion of this parameter and
 how it is used.
 
 set. Section &<<SECTauthparamail>>& contains a discussion of this parameter and
 how it is used.
 

-.cindex "&$message_size$&"
+.vindex "&$message_size$&"

 The &$message_size$& variable is set to the value of the SIZE parameter on
 the MAIL command at MAIL, RCPT and pre-data time, or to -1 if
 that parameter is not given. The value is updated to the true message size by
 the time the final DATA ACL is run (after the message data has been
 received).
 
 The &$message_size$& variable is set to the value of the SIZE parameter on
 the MAIL command at MAIL, RCPT and pre-data time, or to -1 if
 that parameter is not given. The value is updated to the true message size by
 the time the final DATA ACL is run (after the message data has been
 received).
 

-.cindex "&$rcpt_count$&"
-.cindex "&$recipients_count$&"
+.vindex "&$rcpt_count$&"
+.vindex "&$recipients_count$&"

 The &$rcpt_count$& variable increases by one for each RCPT command received.
 The &$recipients_count$& variable increases by one each time a RCPT command is
 accepted, so while an ACL for RCPT is being processed, it contains the number
 The &$rcpt_count$& variable increases by one for each RCPT command received.
 The &$recipients_count$& variable increases by one each time a RCPT command is
 accepted, so while an ACL for RCPT is being processed, it contains the number


@@ -24389,8 +24990,8 @@ of previously accepted recipients. At DATA time (for both the DATA ACLs),
 
 .section "Data for non-message ACLs" "SECTdatfornon"
 .cindex "&ACL;" "data for non-message ACL"
 
 .section "Data for non-message ACLs" "SECTdatfornon"
 .cindex "&ACL;" "data for non-message ACL"

-.cindex &$smtp_command_argument$&
-.cindex &$smtp_command$&
+.vindex &$smtp_command_argument$&
+.vindex &$smtp_command$&

 When an ACL is being run for AUTH, EHLO, ETRN, EXPN, HELO, STARTTLS, or VRFY,
 the remainder of the SMTP command line is placed in &$smtp_command_argument$&,
 and the entire SMTP command is available in &$smtp_command$&.
 When an ACL is being run for AUTH, EHLO, ETRN, EXPN, HELO, STARTTLS, or VRFY,
 the remainder of the SMTP command line is placed in &$smtp_command_argument$&,
 and the entire SMTP command is available in &$smtp_command$&.


@@ -24413,9 +25014,9 @@ option to do this.)
 
 
 
 
 
 

-.section "Format of an ACL"
+.section "Format of an ACL" "SECID199"

 .cindex "&ACL;" "format of"
 .cindex "&ACL;" "format of"

-.cindex "&ACL;" "verbs; definition of"
+.cindex "&ACL;" "verbs, definition of"

 An individual ACL consists of a number of statements. Each statement starts
 with a verb, optionally followed by a number of conditions and &"modifiers"&.
 Modifiers can change the way the verb operates, define error and log messages,
 An individual ACL consists of a number of statements. Each statement starts
 with a verb, optionally followed by a number of conditions and &"modifiers"&.
 Modifiers can change the way the verb operates, define error and log messages,


@@ -24436,11 +25037,11 @@ all the conditions make sense at every testing point. For example, you cannot
 test a sender address in the ACL that is run for a VRFY command.
 
 
 test a sender address in the ACL that is run for a VRFY command.
 
 

-.section "ACL verbs"
+.section "ACL verbs" "SECID200"

 The ACL verbs are as follows:
 
 .ilist
 The ACL verbs are as follows:
 
 .ilist

-.cindex "&%accept%&" "ACL verb"
+.cindex "&%accept%& ACL verb"

 &%accept%&: If all the conditions are met, the ACL returns &"accept"&. If any
 of the conditions are not met, what happens depends on whether &%endpass%&
 appears among the conditions (for syntax see below). If the failing condition
 &%accept%&: If all the conditions are met, the ACL returns &"accept"&. If any
 of the conditions are not met, what happens depends on whether &%endpass%&
 appears among the conditions (for syntax see below). If the failing condition


@@ -24458,13 +25059,12 @@ the command is accepted if verification succeeds. However, if verification
 fails, the ACL yields &"deny"&, because the failing condition is after
 &%endpass%&.
 
 fails, the ACL yields &"deny"&, because the failing condition is after
 &%endpass%&.
 

-.new

 The &%endpass%& feature has turned out to be confusing to many people, so its
 use is not recommended nowadays. It is always possible to rewrite an ACL so
 that &%endpass%& is not needed, and it is no longer used in the default
 configuration.
 
 The &%endpass%& feature has turned out to be confusing to many people, so its
 use is not recommended nowadays. It is always possible to rewrite an ACL so
 that &%endpass%& is not needed, and it is no longer used in the default
 configuration.
 

-.cindex "&%message%&" "ACL modifier, with &%accept%&"
+.cindex "&%message%& ACL modifier" "with &%accept%&"

 If a &%message%& modifier appears on an &%accept%& statement, its action
 depends on whether or not &%endpass%& is present. In the absence of &%endpass%&
 (when an &%accept%& verb either accepts or passes control to the next
 If a &%message%& modifier appears on an &%accept%& statement, its action
 depends on whether or not &%endpass%& is present. In the absence of &%endpass%&
 (when an &%accept%& verb either accepts or passes control to the next


@@ -24472,7 +25072,7 @@ statement), &%message%& can be used to vary the message that is sent when an
 SMTP command is accepted. For example, in a RCPT ACL you could have:
 .display
 &`accept  `&<&'some conditions'&>
 SMTP command is accepted. For example, in a RCPT ACL you could have:
 .display
 &`accept  `&<&'some conditions'&>

-&`        message = OK, I'll allow you through today`&
+&`        message = OK, I will allow you through today`&

 .endd
 You can specify an SMTP response code, optionally followed by an &"extended
 response code"& at the start of the message, but the first digit must be the
 .endd
 You can specify an SMTP response code, optionally followed by an &"extended
 response code"& at the start of the message, but the first digit must be the


@@ -24482,11 +25082,10 @@ If &%endpass%& is present in an &%accept%& statement, &%message%& specifies
 an error message that is used when access is denied. This behaviour is retained
 for backward compatibility, but current &"best practice"& is to avoid the use
 of &%endpass%&.
 an error message that is used when access is denied. This behaviour is retained
 for backward compatibility, but current &"best practice"& is to avoid the use
 of &%endpass%&.

-.wen

 
 
 .next
 
 
 .next

-.cindex "&%defer%&" "ACL verb"
+.cindex "&%defer%& ACL verb"

 &%defer%&: If all the conditions are true, the ACL returns &"defer"& which, in
 an SMTP session, causes a 4&'xx'& response to be given. For a non-SMTP ACL,
 &%defer%& is the same as &%deny%&, because there is no way of sending a
 &%defer%&: If all the conditions are true, the ACL returns &"defer"& which, in
 an SMTP session, causes a 4&'xx'& response to be given. For a non-SMTP ACL,
 &%defer%& is the same as &%deny%&, because there is no way of sending a


@@ -24496,7 +25095,7 @@ be used in any ACL, and even for a recipient it might be a simpler approach.
 
 
 .next
 
 
 .next

-.cindex "&%deny%&" "ACL verb"
+.cindex "&%deny%& ACL verb"

 &%deny%&: If all the conditions are met, the ACL returns &"deny"&. If any of
 the conditions are not met, control is passed to the next ACL statement. For
 example,
 &%deny%&: If all the conditions are met, the ACL returns &"deny"&. If any of
 the conditions are not met, control is passed to the next ACL statement. For
 example,


@@ -24507,8 +25106,7 @@ rejects commands from hosts that are on a DNS black list.
 
 
 .next
 
 
 .next

-.new
-.cindex "&%discard%&" "ACL verb"
+.cindex "&%discard%& ACL verb"

 &%discard%&: This verb behaves like &%accept%&, except that it returns
 &"discard"& from the ACL instead of &"accept"&. It is permitted only on ACLs
 that are concerned with receiving messages. When all the conditions are true,
 &%discard%&: This verb behaves like &%accept%&, except that it returns
 &"discard"& from the ACL instead of &"accept"&. It is permitted only on ACLs
 that are concerned with receiving messages. When all the conditions are true,


@@ -24521,11 +25119,10 @@ do not appear in the log line when the &%log_recipients%& log selector is set.
 If the &%log_message%& modifier is set when &%discard%& operates,
 its contents are added to the line that is automatically written to the log.
 The &%message%& modifier operates exactly as it does for &%accept%&.
 If the &%log_message%& modifier is set when &%discard%& operates,
 its contents are added to the line that is automatically written to the log.
 The &%message%& modifier operates exactly as it does for &%accept%&.

-.wen

 
 
 .next
 
 
 .next

-.cindex "&%drop%&" "ACL verb"
+.cindex "&%drop%& ACL verb"

 &%drop%&: This verb behaves like &%deny%&, except that an SMTP connection is
 forcibly closed after the 5&'xx'& error message has been sent. For example:
 .code
 &%drop%&: This verb behaves like &%deny%&, except that an SMTP connection is
 forcibly closed after the 5&'xx'& error message has been sent. For example:
 .code


@@ -24536,18 +25133,21 @@ There is no difference between &%deny%& and &%drop%& for the connect-time ACL.
 The connection is always dropped after sending a 550 response.
 
 .next
 The connection is always dropped after sending a 550 response.
 
 .next

-.cindex "&%require%&" "ACL verb"
+.cindex "&%require%& ACL verb"

 &%require%&: If all the conditions are met, control is passed to the next ACL
 statement. If any of the conditions are not met, the ACL returns &"deny"&. For
 example, when checking a RCPT command,
 .code
 &%require%&: If all the conditions are met, control is passed to the next ACL
 statement. If any of the conditions are not met, the ACL returns &"deny"&. For
 example, when checking a RCPT command,
 .code

-require verify = sender
+require message = Sender did not verify
+        verify  = sender

 .endd
 passes control to subsequent statements only if the message's sender can be
 .endd
 passes control to subsequent statements only if the message's sender can be

-verified. Otherwise, it rejects the command.
+verified. Otherwise, it rejects the command. Note the positioning of the
+&%message%& modifier, before the &%verify%& condition. The reason for this is
+discussed in section &<<SECTcondmodproc>>&.

 
 .next
 
 .next

-.cindex "&%warn%&" "ACL verb"
+.cindex "&%warn%& ACL verb"

 &%warn%&: If all the conditions are true, a line specified by the
 &%log_message%& modifier is written to Exim's main log. Control always passes
 to the next ACL statement. If any condition is false, the log line is not
 &%warn%&: If all the conditions are true, a line specified by the
 &%log_message%& modifier is written to Exim's main log. Control always passes
 to the next ACL statement. If any condition is false, the log line is not


@@ -24563,14 +25163,14 @@ condition. There is more about adding header lines in section
 
 If any condition on a &%warn%& statement cannot be completed (that is, there is
 some sort of defer), the log line specified by &%log_message%& is not written.
 
 If any condition on a &%warn%& statement cannot be completed (that is, there is
 some sort of defer), the log line specified by &%log_message%& is not written.

-&new("This does not include the case of a forced failure from a lookup, which
-is considered to be a successful completion. After a defer,") no further
+This does not include the case of a forced failure from a lookup, which
+is considered to be a successful completion. After a defer, no further

 conditions or modifiers in the &%warn%& statement are processed. The incident
 is logged, and the ACL continues to be processed, from the next statement
 onwards.
 
 
 conditions or modifiers in the &%warn%& statement are processed. The incident
 is logged, and the ACL continues to be processed, from the next statement
 onwards.
 
 

-.cindex "&$acl_verify_message$&"
+.vindex "&$acl_verify_message$&"

 When one of the &%warn%& conditions is an address verification that fails, the
 text of the verification failure message is in &$acl_verify_message$&. If you
 want this logged, you must set it up explicitly. For example:
 When one of the &%warn%& conditions is an address verification that fails, the
 text of the verification failure message is in &$acl_verify_message$&. If you
 want this logged, you must set it up explicitly. For example:


@@ -24591,7 +25191,6 @@ mechanism. It is conventional to align the conditions vertically.
 
 
 .section "ACL variables" "SECTaclvariables"
 
 
 .section "ACL variables" "SECTaclvariables"

-.new

 .cindex "&ACL;" "variables"
 There are some special variables that can be set during ACL processing. They
 can be used to pass information between different ACLs, different invocations
 .cindex "&ACL;" "variables"
 There are some special variables that can be set during ACL processing. They
 can be used to pass information between different ACLs, different invocations


@@ -24607,7 +25206,7 @@ throughout an SMTP connection. They are never reset. Thus, a value that is set
 while receiving one message is still available when receiving the next message
 on the same SMTP connection.
 .next
 while receiving one message is still available when receiving the next message
 on the same SMTP connection.
 .next

-The values of those variables whose names beging with &$acl_m$& persist only
+The values of those variables whose names begin with &$acl_m$& persist only

 while a message is being received. They are reset afterwards. They are also
 reset by MAIL, RSET, EHLO, HELO, and after starting up a TLS session.
 .endlist
 while a message is being received. They are reset afterwards. They are also
 reset by MAIL, RSET, EHLO, HELO, and after starting up a TLS session.
 .endlist


@@ -24633,10 +25232,9 @@ error is generated.
 
 Versions of Exim before 4.64 have a limited set of numbered variables, but
 their names are compatible, so there is no problem with upgrading.
 
 Versions of Exim before 4.64 have a limited set of numbered variables, but
 their names are compatible, so there is no problem with upgrading.

-.wen

 
 
 
 

-.section "Condition and modifier processing"
+.section "Condition and modifier processing" "SECTcondmodproc"

 .cindex "&ACL;" "conditions; processing"
 .cindex "&ACL;" "modifiers; processing"
 An exclamation mark preceding a condition negates its result. For example:
 .cindex "&ACL;" "conditions; processing"
 .cindex "&ACL;" "modifiers; processing"
 An exclamation mark preceding a condition negates its result. For example:


@@ -24720,8 +25318,24 @@ This modifier specifies one or more header lines that are to be added to an
 incoming message, assuming, of course, that the message is ultimately
 accepted. For details, see section &<<SECTaddheadacl>>&.
 
 incoming message, assuming, of course, that the message is ultimately
 accepted. For details, see section &<<SECTaddheadacl>>&.
 

+.vitem &*continue*&&~=&~<&'text'&>
+.cindex "&%continue%& ACL modifier"
+.cindex "database" "updating in ACL"
+This modifier does nothing of itself, and processing of the ACL always
+continues with the next condition or modifier. The value of &%continue%& is in
+the side effects of expanding its argument. Typically this could be used to
+update a database. It is really just a syntactic tidiness, to avoid having to
+write rather ugly lines like this:
+.display
+&`condition = ${if eq{0}{`&<&'some expansion'&>&`}{true}{true}}`&
+.endd
+Instead, all you need is
+.display
+&`continue = `&<&'some expansion'&>
+.endd
+

 .vitem &*control*&&~=&~<&'text'&>
 .vitem &*control*&&~=&~<&'text'&>

-.cindex "&%control%&" "ACL modifier"
+.cindex "&%control%& ACL modifier"

 This modifier affects the subsequent processing of the SMTP connection or of an
 incoming message that is accepted. The effect of the first type of control
 lasts for the duration of the connection, whereas the effect of the second type
 This modifier affects the subsequent processing of the SMTP connection or of an
 incoming message that is accepted. The effect of the first type of control
 lasts for the duration of the connection, whereas the effect of the second type


@@ -24734,7 +25348,9 @@ separately in section &<<SECTcontrols>>&. The &%control%& modifier can be used
 in several different ways. For example:
 
 . ==== As this is a nested list, any displays it contains must be indented
 in several different ways. For example:
 
 . ==== As this is a nested list, any displays it contains must be indented

-. ==== as otherwise they are too far to the left.
+. ==== as otherwise they are too far to the left. That comment applies only
+. ==== when xmlto and fop are used; formatting with sdop gets it right either
+. ==== way.

 
 .ilist
 It can be at the end of an &%accept%& statement:
 
 .ilist
 It can be at the end of an &%accept%& statement:


@@ -24774,18 +25390,19 @@ log entry.
 If you want to apply a control unconditionally, you can use it with a
 &%require%& verb. For example:
 .code
 If you want to apply a control unconditionally, you can use it with a
 &%require%& verb. For example:
 .code

-    require  control = no_multiline_response
+    require  control = no_multiline_responses

 .endd
 .endlist
 
 .vitem &*delay*&&~=&~<&'time'&>
 .endd
 .endlist
 
 .vitem &*delay*&&~=&~<&'time'&>

-.cindex "&%delay%&" "ACL modifier"
-.cindex "&%-bh%& option"
-This modifier causes Exim to wait for the time interval before proceeding. The
-time is given in the usual Exim notation. This modifier may appear in any ACL.
-The delay happens as soon as the modifier is processed. However, when testing
-Exim using the &%-bh%& option, the delay is not actually imposed (an
-appropriate message is output instead).
+.cindex "&%delay%& ACL modifier"
+.oindex "&%-bh%&"
+This modifier may appear in any ACL. It causes Exim to wait for the time
+interval before proceeding. However, when testing Exim using the &%-bh%&
+option, the delay is not actually imposed (an appropriate message is output
+instead). The time is given in the usual Exim notation, and the delay happens
+as soon as the modifier is processed. In an SMTP session, pending output is
+flushed before the delay is imposed.

 
 Like &%control%&, &%delay%& can be used with &%accept%& or &%deny%&, for
 example:
 
 Like &%control%&, &%delay%& can be used with &%accept%& or &%deny%&, for
 example:


@@ -24808,27 +25425,33 @@ warn    ...some conditions...
 accept  ...
 .endd
 
 accept  ...
 .endd
 

-.new
+If &%delay%& is encountered when the SMTP PIPELINING extension is in use,
+responses to several commands are no longer buffered and sent in one packet (as
+they would normally be) because all output is flushed before imposing the
+delay. This optimization is disabled so that a number of small delays do not
+appear to the client as one large aggregated delay that might provoke an
+unwanted timeout. You can, however, disable output flushing for &%delay%& by
+using a &%control%& modifier to set &%no_delay_flush%&.
+
+

 .vitem &*endpass*&
 .vitem &*endpass*&

-.cindex "&%endpass%&" "ACL modifier"
+.cindex "&%endpass%& ACL modifier"

 This modifier, which has no argument, is recognized only in &%accept%& and
 &%discard%& statements. It marks the boundary between the conditions whose
 failure causes control to pass to the next statement, and the conditions whose
 failure causes the ACL to return &"deny"&. This concept has proved to be
 confusing to some people, so the use of &%endpass%& is no longer recommended as
 &"best practice"&. See the description of &%accept%& above for more details.
 This modifier, which has no argument, is recognized only in &%accept%& and
 &%discard%& statements. It marks the boundary between the conditions whose
 failure causes control to pass to the next statement, and the conditions whose
 failure causes the ACL to return &"deny"&. This concept has proved to be
 confusing to some people, so the use of &%endpass%& is no longer recommended as
 &"best practice"&. See the description of &%accept%& above for more details.

-.wen

 
 
 .vitem &*log_message*&&~=&~<&'text'&>
 
 
 .vitem &*log_message*&&~=&~<&'text'&>

-.cindex "&%log_message%&" "ACL modifier"
+.cindex "&%log_message%& ACL modifier"

 This modifier sets up a message that is used as part of the log message if the
 ACL denies access or a &%warn%& statement's conditions are true. For example:
 .code
 require log_message = wrong cipher suite $tls_cipher
         encrypted   = DES-CBC3-SHA
 .endd
 This modifier sets up a message that is used as part of the log message if the
 ACL denies access or a &%warn%& statement's conditions are true. For example:
 .code
 require log_message = wrong cipher suite $tls_cipher
         encrypted   = DES-CBC3-SHA
 .endd

-.new

 &%log_message%& is also used when recipients are discarded by &%discard%&. For
 example:
 .display
 &%log_message%& is also used when recipients are discarded by &%discard%&. For
 example:
 .display


@@ -24847,9 +25470,8 @@ available for inclusion in the message. For example, the &$dnslist_$&<&'xxx'&>
 variables are set after a DNS black list lookup succeeds. If the expansion of
 &%log_message%& fails, or if the result is an empty string, the modifier is
 ignored.
 variables are set after a DNS black list lookup succeeds. If the expansion of
 &%log_message%& fails, or if the result is an empty string, the modifier is
 ignored.

-.wen

 
 

-.cindex "&$acl_verify_message$&"
+.vindex "&$acl_verify_message$&"

 If you want to use a &%warn%& statement to log the result of an address
 verification, you can use &$acl_verify_message$& to include the verification
 error message.
 If you want to use a &%warn%& statement to log the result of an address
 verification, you can use &$acl_verify_message$& to include the verification
 error message.


@@ -24859,7 +25481,7 @@ the start of the logged message. If the same warning log message is requested
 more than once while receiving  a single email message, only one copy is
 actually logged. If you want to log multiple copies, use &%logwrite%& instead
 of &%log_message%&. In the absence of &%log_message%& and &%logwrite%&, nothing
 more than once while receiving  a single email message, only one copy is
 actually logged. If you want to log multiple copies, use &%logwrite%& instead
 of &%log_message%&. In the absence of &%log_message%& and &%logwrite%&, nothing

-is logged for a succesful &%warn%& statement.
+is logged for a successful &%warn%& statement.

 
 If &%log_message%& is not present and there is no underlying error message (for
 example, from the failure of address verification), but &%message%& is present,
 
 If &%log_message%& is not present and there is no underlying error message (for
 example, from the failure of address verification), but &%message%& is present,


@@ -24869,9 +25491,8 @@ both &%log_message%& and &%message%&, a default built-in message is used for
 logging rejections.
 
 
 logging rejections.
 
 

-.new

 .vitem "&*log_reject_target*&&~=&~<&'log name list'&>"
 .vitem "&*log_reject_target*&&~=&~<&'log name list'&>"

-.cindex "&%log_reject_target%&" "ACL modifier"
+.cindex "&%log_reject_target%& ACL modifier"

 .cindex "logging in ACL" "specifying which log"
 This modifier makes it possible to specify which logs are used for messages
 about ACL rejections. Its argument is a colon-separated list of words that can
 .cindex "logging in ACL" "specifying which log"
 This modifier makes it possible to specify which logs are used for messages
 about ACL rejections. Its argument is a colon-separated list of words that can


@@ -24884,15 +25505,14 @@ ACL fragment writes no logging information when access is denied:
 .endd
 This modifier can be used in SMTP and non-SMTP ACLs. It applies to both
 permanent and temporary rejections.
 .endd
 This modifier can be used in SMTP and non-SMTP ACLs. It applies to both
 permanent and temporary rejections.

-.wen

 
 
 .vitem &*logwrite*&&~=&~<&'text'&>
 
 
 .vitem &*logwrite*&&~=&~<&'text'&>

-.cindex "&%logwrite%&" "ACL modifier"
+.cindex "&%logwrite%& ACL modifier"

 .cindex "logging in ACL" "immediate"
 This modifier writes a message to a log file as soon as it is encountered when
 processing an ACL. (Compare &%log_message%&, which, except in the case of
 .cindex "logging in ACL" "immediate"
 This modifier writes a message to a log file as soon as it is encountered when
 processing an ACL. (Compare &%log_message%&, which, except in the case of

-&%warn%& &new("and &%discard%&"), is used only if the ACL statement denies
+&%warn%& and &%discard%&, is used only if the ACL statement denies

 access.) The &%logwrite%& modifier can be used to log special incidents in
 ACLs. For example:
 .display
 access.) The &%logwrite%& modifier can be used to log special incidents in
 ACLs. For example:
 .display


@@ -24911,8 +25531,7 @@ logwrite = :panic: text for panic log only
 
 
 .vitem &*message*&&~=&~<&'text'&>
 
 
 .vitem &*message*&&~=&~<&'text'&>

-.new
-.cindex "&%message%&" "ACL modifier"
+.cindex "&%message%& ACL modifier"

 This modifier sets up a text string that is expanded and used as a response
 message when an ACL statement terminates the ACL with an &"accept"&, &"deny"&,
 or &"defer"& response. (In the case of the &%accept%& and &%discard%& verbs,
 This modifier sets up a text string that is expanded and used as a response
 message when an ACL statement terminates the ACL with an &"accept"&, &"deny"&,
 or &"defer"& response. (In the case of the &%accept%& and &%discard%& verbs,


@@ -24932,7 +25551,7 @@ require  message = Host not recognized
 processed.)
 
 .cindex "SMTP" "error codes"
 processed.)
 
 .cindex "SMTP" "error codes"

-.cindex "&%smtp_banner%&
+.oindex "&%smtp_banner%&

 For ACLs that are triggered by SMTP commands, the message is returned as part
 of the SMTP response. The use of &%message%& with &%accept%& (or &%discard%&)
 is meaningful only for SMTP, as no message is returned when a non-SMTP message
 For ACLs that are triggered by SMTP commands, the message is returned as part
 of the SMTP response. The use of &%message%& with &%accept%& (or &%discard%&)
 is meaningful only for SMTP, as no message is returned when a non-SMTP message


@@ -24961,9 +25580,8 @@ The text in a &%message%& modifier is literal; any quotes are taken as
 literals, but because the string is expanded, backslash escapes are processed
 anyway. If the message contains newlines, this gives rise to a multi-line SMTP
 response.
 literals, but because the string is expanded, backslash escapes are processed
 anyway. If the message contains newlines, this gives rise to a multi-line SMTP
 response.

-.wen

 
 

-.cindex "&$acl_verify_message$&"
+.vindex "&$acl_verify_message$&"

 If &%message%& is used on a statement that verifies an address, the message
 specified overrides any message that is generated by the verification process.
 However, the original message is available in the variable
 If &%message%& is used on a statement that verifies an address, the message
 specified overrides any message that is generated by the verification process.
 However, the original message is available in the variable


@@ -24982,7 +25600,7 @@ effect.
 
 
 .vitem &*set*&&~<&'acl_name'&>&~=&~<&'value'&>
 
 
 .vitem &*set*&&~<&'acl_name'&>&~=&~<&'value'&>

-.cindex "&%set%&" "ACL modifier"
+.cindex "&%set%& ACL modifier"

 This modifier puts a value into one of the ACL variables (see section
 &<<SECTaclvariables>>&).
 .endlist
 This modifier puts a value into one of the ACL variables (see section
 &<<SECTaclvariables>>&).
 .endlist


@@ -24992,7 +25610,7 @@ This modifier puts a value into one of the ACL variables (see section
 
 
 .section "Use of the control modifier" "SECTcontrols"
 
 
 .section "Use of the control modifier" "SECTcontrols"

-.cindex "&%control%&" "ACL modifier"
+.cindex "&%control%& ACL modifier"

 The &%control%& modifier supports the following settings:
 
 .vlist
 The &%control%& modifier supports the following settings:
 
 .vlist


@@ -25014,13 +25632,11 @@ mechanism has been advertised is bypassed. Any configured mechanism can be used
 by the client. This control is permitted only in the connection and HELO ACLs.
 
 
 by the client. This control is permitted only in the connection and HELO ACLs.
 
 

-.vitem &*control&~=&~caseful_local_part*&
-See below.
-
-.vitem &*control&~=&~caselower_local_part*&
+.vitem &*control&~=&~caseful_local_part*& &&&
+       &*control&~=&~caselower_local_part*&

 .cindex "&ACL;" "case of local part in"
 .cindex "case of local parts"
 .cindex "&ACL;" "case of local part in"
 .cindex "case of local parts"

-.cindex "&$local_part$&"
+.vindex "&$local_part$&"

 These two controls are permitted only in the ACL specified by &%acl_smtp_rcpt%&
 (that is, during RCPT processing). By default, the contents of &$local_part$&
 are lower cased before ACL processing. If &"caseful_local_part"& is specified,
 These two controls are permitted only in the ACL specified by &%acl_smtp_rcpt%&
 (that is, during RCPT processing). By default, the contents of &$local_part$&
 are lower cased before ACL processing. If &"caseful_local_part"& is specified,


@@ -25048,10 +25664,8 @@ warn  control = caseful_local_part
 Notice that we put back the lower cased version afterwards, assuming that
 is what is wanted for subsequent tests.
 
 Notice that we put back the lower cased version afterwards, assuming that
 is what is wanted for subsequent tests.
 

-.vitem &*control&~=&~enforce_sync*&
-See below.
-
-.vitem &*control&~=&~no_enforce_sync*&
+.vitem &*control&~=&~enforce_sync*& &&&
+       &*control&~=&~no_enforce_sync*&

 .cindex "SMTP" "synchronization checking"
 .cindex "synchronization checking in SMTP"
 These controls make it possible to be selective about when SMTP synchronization
 .cindex "SMTP" "synchronization checking"
 .cindex "synchronization checking in SMTP"
 These controls make it possible to be selective about when SMTP synchronization


@@ -25070,7 +25684,7 @@ work with.
 
 .vitem &*control&~=&~fakedefer/*&<&'message'&>
 .cindex "fake defer"
 
 .vitem &*control&~=&~fakedefer/*&<&'message'&>
 .cindex "fake defer"

-.cindex "defer" "fake"
+.cindex "defer, fake"

 This control works in exactly the same way as &%fakereject%& (described below)
 except that it causes an SMTP 450 response after the message data instead of a
 550 response. You must take care when using &%fakedefer%& because it causes the
 This control works in exactly the same way as &%fakereject%& (described below)
 except that it causes an SMTP 450 response after the message data instead of a
 550 response. You must take care when using &%fakedefer%& because it causes the


@@ -25079,7 +25693,7 @@ use &%fakedefer%& if the message is to be delivered normally.
 
 .vitem &*control&~=&~fakereject/*&<&'message'&>
 .cindex "fake rejection"
 
 .vitem &*control&~=&~fakereject/*&<&'message'&>
 .cindex "fake rejection"

-.cindex "rejection" "fake"
+.cindex "rejection, fake"

 This control is permitted only for the MAIL, RCPT, and DATA ACLs, in other
 words, only when an SMTP message is being received. If Exim accepts the
 message, instead the final 250 response, a 550 rejection message is sent.
 This control is permitted only for the MAIL, RCPT, and DATA ACLs, in other
 words, only when an SMTP message is being received. If Exim accepts the
 message, instead the final 250 response, a 550 rejection message is sent.


@@ -25095,7 +25709,7 @@ message is supplied, the following is used:
 550-If it was a legitimate message, it may still be
 550 delivered to the target recipient(s).
 .endd
 550-If it was a legitimate message, it may still be
 550 delivered to the target recipient(s).
 .endd

-This facilty should be used with extreme caution.
+This facility should be used with extreme caution.

 
 .vitem &*control&~=&~freeze*&
 .cindex "frozen messages" "forcing in ACL"
 
 .vitem &*control&~=&~freeze*&
 .cindex "frozen messages" "forcing in ACL"


@@ -25110,6 +25724,19 @@ This modifier can optionally be followed by &`/no_tell`&. If the global option
 is told about the freezing), provided all the &*control=freeze*& modifiers that
 are obeyed for the current message have the &`/no_tell`& option.
 
 is told about the freezing), provided all the &*control=freeze*& modifiers that
 are obeyed for the current message have the &`/no_tell`& option.
 

+.vitem &*control&~=&~no_delay_flush*&
+.cindex "SMTP" "output flushing, disabling for delay"
+Exim normally flushes SMTP output before implementing a delay in an ACL, to
+avoid unexpected timeouts in clients when the SMTP PIPELINING extension is in
+use. This control, as long as it is encountered before the &%delay%& modifier,
+disables such output flushing.
+
+.vitem &*control&~=&~no_callout_flush*&
+.cindex "SMTP" "output flushing, disabling for callout"
+Exim normally flushes SMTP output before performing a callout in an ACL, to
+avoid unexpected timeouts in clients when the SMTP PIPELINING extension is in
+use. This control, as long as it is encountered before the &%verify%& condition
+that causes the callout, disables such output flushing.

 
 .vitem &*control&~=&~no_mbox_unspool*&
 This control is available when Exim is compiled with the content scanning
 
 .vitem &*control&~=&~no_mbox_unspool*&
 This control is available when Exim is compiled with the content scanning


@@ -25121,8 +25748,8 @@ only to the current message, not to any subsequent ones that may be received in
 the same SMTP connection. It is provided for debugging purposes and is unlikely
 to be useful in production.
 
 the same SMTP connection. It is provided for debugging purposes and is unlikely
 to be useful in production.
 

-.vitem &*control&~=&~no_multiline_response*&
-.cindex "multiline responses" "suppressing"
+.vitem &*control&~=&~no_multiline_responses*&
+.cindex "multiline responses, suppressing"

 This control is permitted for any ACL except the one for non-SMTP messages.
 It seems that there are broken clients in use that cannot handle multiline
 SMTP responses, despite the fact that RFC 821 defined them over 20 years ago.
 This control is permitted for any ACL except the one for non-SMTP messages.
 It seems that there are broken clients in use that cannot handle multiline
 SMTP responses, despite the fact that RFC 821 defined them over 20 years ago.


@@ -25146,8 +25773,16 @@ line is output.
 The setting of the switch can, of course, be made conditional on the
 calling host. Its effect lasts until the end of the SMTP connection.
 
 The setting of the switch can, of course, be made conditional on the
 calling host. Its effect lasts until the end of the SMTP connection.
 

+.vitem &*control&~=&~no_pipelining*&
+.cindex "PIPELINING" "suppressing advertising"
+This control turns off the advertising of the PIPELINING extension to SMTP in
+the current session. To be useful, it must be obeyed before Exim sends its
+response to an EHLO command. Therefore, it should normally appear in an ACL
+controlled by &%acl_smtp_connect%& or &%acl_smtp_helo%&. See also
+&%pipelining_advertise_hosts%&.
+

 .vitem &*control&~=&~queue_only*&
 .vitem &*control&~=&~queue_only*&

-.cindex "&%queue_only%&"
+.oindex "&%queue_only%&"

 .cindex "queueing incoming messages"
 This control is permitted only for the MAIL, RCPT, DATA, and non-SMTP ACLs, in
 other words, only when a message is being received. If the message is accepted,
 .cindex "queueing incoming messages"
 This control is permitted only for the MAIL, RCPT, DATA, and non-SMTP ACLs, in
 other words, only when a message is being received. If the message is accepted,


@@ -25175,7 +25810,7 @@ The control applies only to the current message, not to any subsequent ones
 that may be received in the same SMTP connection.
 
 .vitem &*control&~=&~suppress_local_fixups*&
 that may be received in the same SMTP connection.
 
 .vitem &*control&~=&~suppress_local_fixups*&

-.cindex "submission fixups" "suppressing"
+.cindex "submission fixups, suppressing"

 This control applies to locally submitted (non TCP/IP) messages, and is the
 complement of &`control`& &`=`& &`submission`&. It disables the fixups that are
 normally applied to locally-submitted messages. Specifically:
 This control applies to locally submitted (non TCP/IP) messages, and is the
 complement of &`control`& &`=`& &`submission`&. It disables the fixups that are
 normally applied to locally-submitted messages. Specifically:


@@ -25194,8 +25829,13 @@ passed to some scanning program, and then re-submitted for delivery. It can be
 used only in the &%acl_smtp_mail%&, &%acl_smtp_rcpt%&, &%acl_smtp_predata%&,
 and &%acl_not_smtp_start%& ACLs, because it has to be set before the message's
 data is read.
 used only in the &%acl_smtp_mail%&, &%acl_smtp_rcpt%&, &%acl_smtp_predata%&,
 and &%acl_not_smtp_start%& ACLs, because it has to be set before the message's
 data is read.

+
+&*Note:*& This control applies only to the current message, not to any others
+that are being submitted at the same time using &%-bs%& or &%-bS%&.

 .endlist vlist
 
 .endlist vlist
 

+
+.section "Summary of message fixup control" "SECTsummesfix"

 All four possibilities for message fixups can be specified:
 
 .ilist
 All four possibilities for message fixups can be specified:
 
 .ilist


@@ -25214,7 +25854,7 @@ Remotely submitted, fixups applied: use &`control`& &`=`& &`submission`&.
 .section "Adding header lines in ACLs" "SECTaddheadacl"
 .cindex "header lines" "adding in an ACL"
 .cindex "header lines" "position of added lines"
 .section "Adding header lines in ACLs" "SECTaddheadacl"
 .cindex "header lines" "adding in an ACL"
 .cindex "header lines" "position of added lines"

-.cindex "&%message%&" "ACL modifier"
+.cindex "&%message%& ACL modifier"

 The &%add_header%& modifier can be used to add one or more extra header lines
 to an incoming message, as in this example:
 .code
 The &%add_header%& modifier can be used to add one or more extra header lines
 to an incoming message, as in this example:
 .code


@@ -25271,7 +25911,7 @@ condition is true. Multiple occurrences of &%add_header%& may occur in the same
 ACL statement. All those that are encountered before a condition fails are
 honoured.
 
 ACL statement. All those that are encountered before a condition fails are
 honoured.
 

-.cindex "&%warn%&" "ACL verb"
+.cindex "&%warn%& ACL verb"

 For compatibility with previous versions of Exim, a &%message%& modifier for a
 &%warn%& verb acts in the same way as &%add_header%&, except that it takes
 effect only if all the conditions are true, even if it appears before some of
 For compatibility with previous versions of Exim, a &%message%& modifier for a
 &%warn%& verb acts in the same way as &%add_header%&, except that it takes
 effect only if all the conditions are true, even if it appears before some of


@@ -25326,7 +25966,7 @@ The conditions are as follows:
 .vitem &*acl&~=&~*&<&'name&~of&~acl&~or&~ACL&~string&~or&~file&~name&~'&>
 .cindex "&ACL;" "nested"
 .cindex "&ACL;" "indirect"
 .vitem &*acl&~=&~*&<&'name&~of&~acl&~or&~ACL&~string&~or&~file&~name&~'&>
 .cindex "&ACL;" "nested"
 .cindex "&ACL;" "indirect"

-.cindex "&%acl%&" "ACL condition"
+.cindex "&%acl%& ACL condition"

 The possible values of the argument are the same as for the
 &%acl_smtp_%&&'xxx'& options. The named or inline ACL is run. If it returns
 &"accept"& the condition is true; if it returns &"deny"& the condition is
 The possible values of the argument are the same as for the
 &%acl_smtp_%&&'xxx'& options. The named or inline ACL is run. If it returns
 &"accept"& the condition is true; if it returns &"deny"& the condition is


@@ -25346,7 +25986,7 @@ circumstances. For example, different ACLs can be used to handle RCPT commands
 for different local users or different local domains.
 
 .vitem &*authenticated&~=&~*&<&'string&~list'&>
 for different local users or different local domains.
 
 .vitem &*authenticated&~=&~*&<&'string&~list'&>

-.cindex "&%authenticated%&" "ACL condition"
+.cindex "&%authenticated%& ACL condition"

 .cindex "authentication" "ACL checking"
 .cindex "&ACL;" "testing for authentication"
 If the SMTP connection is not authenticated, the condition is false. Otherwise,
 .cindex "authentication" "ACL checking"
 .cindex "&ACL;" "testing for authentication"
 If the SMTP connection is not authenticated, the condition is false. Otherwise,


@@ -25357,10 +25997,10 @@ authenticated = *
 .endd
 
 .vitem &*condition&~=&~*&<&'string'&>
 .endd
 
 .vitem &*condition&~=&~*&<&'string'&>

-.cindex "&%condition%&" "ACL condition"
+.cindex "&%condition%& ACL condition"

 .cindex "customizing" "ACL condition"
 .cindex "&ACL;" "customized test"
 .cindex "customizing" "ACL condition"
 .cindex "&ACL;" "customized test"

-.cindex "&ACL;" "testing; customized"
+.cindex "&ACL;" "testing, customized"

 This feature allows you to make up custom conditions. If the result of
 expanding the string is an empty string, the number zero, or one of the strings
 &"no"& or &"false"&, the condition is false. If the result is any non-zero
 This feature allows you to make up custom conditions. If the result of
 expanding the string is an empty string, the number zero, or one of the strings
 &"no"& or &"false"&, the condition is false. If the result is any non-zero


@@ -25371,20 +26011,22 @@ ignored. The effect is to treat it as true, whether it is positive or
 negative.
 
 .vitem &*decode&~=&~*&<&'location'&>
 negative.
 
 .vitem &*decode&~=&~*&<&'location'&>

-.cindex "&%decode%&" "ACL condition"
+.cindex "&%decode%& ACL condition"

 This condition is available only when Exim is compiled with the
 content-scanning extension, and it is allowed only in the ACL defined by
 &%acl_smtp_mime%&. It causes the current MIME part to be decoded into a file.
 This condition is available only when Exim is compiled with the
 content-scanning extension, and it is allowed only in the ACL defined by
 &%acl_smtp_mime%&. It causes the current MIME part to be decoded into a file.

-For details, see chapter &<<CHAPexiscan>>&.
+If all goes well, the condition is true. It is false only if there are
+problems such as a syntax error or a memory shortage. For more details, see
+chapter &<<CHAPexiscan>>&.

 
 .vitem &*demime&~=&~*&<&'extension&~list'&>
 
 .vitem &*demime&~=&~*&<&'extension&~list'&>

-.cindex "&%demime%&" "ACL condition"
+.cindex "&%demime%& ACL condition"

 This condition is available only when Exim is compiled with the
 content-scanning extension. Its use is described in section
 &<<SECTdemimecond>>&.
 
 .vitem &*dnslists&~=&~*&<&'list&~of&~domain&~names&~and&~other&~data'&>
 This condition is available only when Exim is compiled with the
 content-scanning extension. Its use is described in section
 &<<SECTdemimecond>>&.
 
 .vitem &*dnslists&~=&~*&<&'list&~of&~domain&~names&~and&~other&~data'&>

-.cindex "&%dnslists%&" "ACL condition"
+.cindex "&%dnslists%& ACL condition"

 .cindex "DNS list" "in ACL"
 .cindex "black list (DNS)"
 .cindex "&ACL;" "testing a DNS list"
 .cindex "DNS list" "in ACL"
 .cindex "black list (DNS)"
 .cindex "&ACL;" "testing a DNS list"


@@ -25392,27 +26034,25 @@ This condition checks for entries in DNS black lists. These are also known as
 &"RBL lists"&, after the original Realtime Blackhole List, but note that the
 use of the lists at &'mail-abuse.org'& now carries a charge. There are too many
 different variants of this condition to describe briefly here. See sections
 &"RBL lists"&, after the original Realtime Blackhole List, but note that the
 use of the lists at &'mail-abuse.org'& now carries a charge. There are too many
 different variants of this condition to describe briefly here. See sections

-&<<SECTmorednslists>>&--&<<SECTmorednslistslast>>& for details.
+&<<SECTmorednslists>>&&--&<<SECTmorednslistslast>>& for details.

 
 .vitem &*domains&~=&~*&<&'domain&~list'&>
 
 .vitem &*domains&~=&~*&<&'domain&~list'&>

-.cindex "&%domains%&" "ACL condition"
+.cindex "&%domains%& ACL condition"

 .cindex "domain" "ACL checking"
 .cindex "&ACL;" "testing a recipient domain"
 .cindex "domain" "ACL checking"
 .cindex "&ACL;" "testing a recipient domain"

-.cindex "&$domain_data$&"
+.vindex "&$domain_data$&"

 This condition is relevant only after a RCPT command. It checks that the domain
 of the recipient address is in the domain list. If percent-hack processing is
 enabled, it is done before this test is done. If the check succeeds with a
 lookup, the result of the lookup is placed in &$domain_data$& until the next
 &%domains%& test.
 
 This condition is relevant only after a RCPT command. It checks that the domain
 of the recipient address is in the domain list. If percent-hack processing is
 enabled, it is done before this test is done. If the check succeeds with a
 lookup, the result of the lookup is placed in &$domain_data$& until the next
 &%domains%& test.
 

-.new

 &*Note carefully*& (because many people seem to fall foul of this): you cannot
 use &%domains%& in a DATA ACL.
 &*Note carefully*& (because many people seem to fall foul of this): you cannot
 use &%domains%& in a DATA ACL.

-.wen

 
 
 .vitem &*encrypted&~=&~*&<&'string&~list'&>
 
 
 .vitem &*encrypted&~=&~*&<&'string&~list'&>

-.cindex "&%encrypted%&" "ACL condition"
+.cindex "&%encrypted%& ACL condition"

 .cindex "encryption" "checking in an ACL"
 .cindex "&ACL;" "testing for encryption"
 If the SMTP connection is not encrypted, the condition is false. Otherwise, the
 .cindex "encryption" "checking in an ACL"
 .cindex "&ACL;" "testing for encryption"
 If the SMTP connection is not encrypted, the condition is false. Otherwise, the


@@ -25424,7 +26064,7 @@ encrypted = *
 
 
 .vitem &*hosts&~=&~*&<&'&~host&~list'&>
 
 
 .vitem &*hosts&~=&~*&<&'&~host&~list'&>

-.cindex "&%hosts%&" "ACL condition"
+.cindex "&%hosts%& ACL condition"

 .cindex "host" "ACL checking"
 .cindex "&ACL;" "testing the client host"
 This condition tests that the calling host matches the host list. If you have
 .cindex "host" "ACL checking"
 .cindex "&ACL;" "testing the client host"
 This condition tests that the calling host matches the host list. If you have


@@ -25433,11 +26073,9 @@ you should normally put the IP addresses first. For example, you could have:
 .code
 accept hosts = 10.9.8.7 : dbm;/etc/friendly/hosts
 .endd
 .code
 accept hosts = 10.9.8.7 : dbm;/etc/friendly/hosts
 .endd

-.new

 The lookup in this example uses the host name for its key. This is implied by
 the lookup type &"dbm"&. (For a host address lookup you would use &"net-dbm"&
 and it wouldn't matter which way round you had these two items.)
 The lookup in this example uses the host name for its key. This is implied by
 the lookup type &"dbm"&. (For a host address lookup you would use &"net-dbm"&
 and it wouldn't matter which way round you had these two items.)

-.wen

 
 The reason for the problem with host names lies in the left-to-right way that
 Exim processes lists. It can test IP addresses without doing any DNS lookups,
 
 The reason for the problem with host names lies in the left-to-right way that
 Exim processes lists. It can test IP addresses without doing any DNS lookups,


@@ -25456,7 +26094,7 @@ The default action on failing to find the host name is to assume that the host
 is not in the list, so the first &%accept%& statement fails. The second
 statement can then check the IP address.
 
 is not in the list, so the first &%accept%& statement fails. The second
 statement can then check the IP address.
 

-.cindex "&$host_data$&"
+.vindex "&$host_data$&"

 If a &%hosts%& condition is satisfied by means of a lookup, the result
 of the lookup is made available in the &$host_data$& variable. This
 allows you, for example, to set up a statement like this:
 If a &%hosts%& condition is satisfied by means of a lookup, the result
 of the lookup is made available in the &$host_data$& variable. This
 allows you, for example, to set up a statement like this:


@@ -25467,10 +26105,10 @@ message = $host_data
 which gives a custom error message for each denied host.
 
 .vitem &*local_parts&~=&~*&<&'local&~part&~list'&>
 which gives a custom error message for each denied host.
 
 .vitem &*local_parts&~=&~*&<&'local&~part&~list'&>

-.cindex "&%local_parts%&" "ACL condition"
+.cindex "&%local_parts%& ACL condition"

 .cindex "local part" "ACL checking"
 .cindex "&ACL;" "testing a local part"
 .cindex "local part" "ACL checking"
 .cindex "&ACL;" "testing a local part"

-.cindex "&$local_part_data$&"
+.vindex "&$local_part_data$&"

 This condition is relevant only after a RCPT command. It checks that the local
 part of the recipient address is in the list. If percent-hack processing is
 enabled, it is done before this test. If the check succeeds with a lookup, the
 This condition is relevant only after a RCPT command. It checks that the local
 part of the recipient address is in the list. If percent-hack processing is
 enabled, it is done before this test. If the check succeeds with a lookup, the


@@ -25478,7 +26116,7 @@ result of the lookup is placed in &$local_part_data$&, which remains set until
 the next &%local_parts%& test.
 
 .vitem &*malware&~=&~*&<&'option'&>
 the next &%local_parts%& test.
 
 .vitem &*malware&~=&~*&<&'option'&>

-.cindex "&%malware%&" "ACL condition"
+.cindex "&%malware%& ACL condition"

 .cindex "&ACL;" "virus scanning"
 .cindex "&ACL;" "scanning for viruses"
 This condition is available only when Exim is compiled with the
 .cindex "&ACL;" "virus scanning"
 .cindex "&ACL;" "scanning for viruses"
 This condition is available only when Exim is compiled with the


@@ -25486,7 +26124,7 @@ content-scanning extension. It causes the incoming message to be scanned for
 viruses. For details, see chapter &<<CHAPexiscan>>&.
 
 .vitem &*mime_regex&~=&~*&<&'list&~of&~regular&~expressions'&>
 viruses. For details, see chapter &<<CHAPexiscan>>&.
 
 .vitem &*mime_regex&~=&~*&<&'list&~of&~regular&~expressions'&>

-.cindex "&%mime_regex%&" "ACL condition"
+.cindex "&%mime_regex%& ACL condition"

 .cindex "&ACL;" "testing by regex matching"
 This condition is available only when Exim is compiled with the
 content-scanning extension, and it is allowed only in the ACL defined by
 .cindex "&ACL;" "testing by regex matching"
 This condition is available only when Exim is compiled with the
 content-scanning extension, and it is allowed only in the ACL defined by


@@ -25500,14 +26138,14 @@ This condition can be used to limit the rate at which a user or host submits
 messages. Details are given in section &<<SECTratelimiting>>&.
 
 .vitem &*recipients&~=&~*&<&'address&~list'&>
 messages. Details are given in section &<<SECTratelimiting>>&.
 
 .vitem &*recipients&~=&~*&<&'address&~list'&>

-.cindex "&%recipients%&" "ACL condition"
+.cindex "&%recipients%& ACL condition"

 .cindex "recipient" "ACL checking"
 .cindex "&ACL;" "testing a recipient"
 This condition is relevant only after a RCPT command. It checks the entire
 recipient address against a list of recipients.
 
 .vitem &*regex&~=&~*&<&'list&~of&~regular&~expressions'&>
 .cindex "recipient" "ACL checking"
 .cindex "&ACL;" "testing a recipient"
 This condition is relevant only after a RCPT command. It checks the entire
 recipient address against a list of recipients.
 
 .vitem &*regex&~=&~*&<&'list&~of&~regular&~expressions'&>

-.cindex "&%regex%&" "ACL condition"
+.cindex "&%regex%& ACL condition"

 .cindex "&ACL;" "testing by regex matching"
 This condition is available only when Exim is compiled with the
 content-scanning extension, and is available only in the DATA, MIME, and
 .cindex "&ACL;" "testing by regex matching"
 This condition is available only when Exim is compiled with the
 content-scanning extension, and is available only in the DATA, MIME, and


@@ -25515,11 +26153,11 @@ non-SMTP ACLs. It causes the incoming message to be scanned for a match with
 any of the regular expressions. For details, see chapter &<<CHAPexiscan>>&.
 
 .vitem &*sender_domains&~=&~*&<&'domain&~list'&>
 any of the regular expressions. For details, see chapter &<<CHAPexiscan>>&.
 
 .vitem &*sender_domains&~=&~*&<&'domain&~list'&>

-.cindex "&%sender_domains%&" "ACL condition"
+.cindex "&%sender_domains%& ACL condition"

 .cindex "sender" "ACL checking"
 .cindex "&ACL;" "testing a sender domain"
 .cindex "sender" "ACL checking"
 .cindex "&ACL;" "testing a sender domain"

-.cindex "&$domain$&"
-.cindex "&$sender_address_domain$&"
+.vindex "&$domain$&"
+.vindex "&$sender_address_domain$&"

 This condition tests the domain of the sender of the message against the given
 domain list. &*Note*&: The domain of the sender address is in
 &$sender_address_domain$&. It is &'not'& put in &$domain$& during the testing
 This condition tests the domain of the sender of the message against the given
 domain list. &*Note*&: The domain of the sender address is in
 &$sender_address_domain$&. It is &'not'& put in &$domain$& during the testing


@@ -25532,7 +26170,7 @@ influence the sender checking.
 relaying, because sender addresses are easily, and commonly, forged.
 
 .vitem &*senders&~=&~*&<&'address&~list'&>
 relaying, because sender addresses are easily, and commonly, forged.
 
 .vitem &*senders&~=&~*&<&'address&~list'&>

-.cindex "&%senders%&" "ACL condition"
+.cindex "&%senders%& ACL condition"

 .cindex "sender" "ACL checking"
 .cindex "&ACL;" "testing a sender"
 This condition tests the sender of the message against the given list. To test
 .cindex "sender" "ACL checking"
 .cindex "&ACL;" "testing a sender"
 This condition tests the sender of the message against the given list. To test


@@ -25544,14 +26182,14 @@ senders = :
 relaying, because sender addresses are easily, and commonly, forged.
 
 .vitem &*spam&~=&~*&<&'username'&>
 relaying, because sender addresses are easily, and commonly, forged.
 
 .vitem &*spam&~=&~*&<&'username'&>

-.cindex "&%spam%&" "ACL condition"
+.cindex "&%spam%& ACL condition"

 .cindex "&ACL;" "scanning for spam"
 This condition is available only when Exim is compiled with the
 content-scanning extension. It causes the incoming message to be scanned by
 SpamAssassin. For details, see chapter &<<CHAPexiscan>>&.
 
 .vitem &*verify&~=&~certificate*&
 .cindex "&ACL;" "scanning for spam"
 This condition is available only when Exim is compiled with the
 content-scanning extension. It causes the incoming message to be scanned by
 SpamAssassin. For details, see chapter &<<CHAPexiscan>>&.
 
 .vitem &*verify&~=&~certificate*&

-.cindex "&%verify%&" "ACL condition"
+.cindex "&%verify%& ACL condition"

 .cindex "TLS" "client certificate verification"
 .cindex "certificate" "verification of client"
 .cindex "&ACL;" "certificate verification"
 .cindex "TLS" "client certificate verification"
 .cindex "certificate" "verification of client"
 .cindex "&ACL;" "certificate verification"


@@ -25568,7 +26206,7 @@ send email. Details of how this works are given in section
 &<<SECTverifyCSA>>&.
 
 .vitem &*verify&~=&~header_sender/*&<&'options'&>
 &<<SECTverifyCSA>>&.
 
 .vitem &*verify&~=&~header_sender/*&<&'options'&>

-.cindex "&%verify%&" "ACL condition"
+.cindex "&%verify%& ACL condition"

 .cindex "&ACL;" "verifying sender in the header"
 .cindex "header lines" "verifying the sender in"
 .cindex "sender" "verifying in header"
 .cindex "&ACL;" "verifying sender in the header"
 .cindex "header lines" "verifying the sender in"
 .cindex "sender" "verifying in header"


@@ -25594,7 +26232,7 @@ deny    senders = :
 .endd
 
 .vitem &*verify&~=&~header_syntax*&
 .endd
 
 .vitem &*verify&~=&~header_syntax*&

-.cindex "&%verify%&" "ACL condition"
+.cindex "&%verify%& ACL condition"

 .cindex "&ACL;" "verifying header syntax"
 .cindex "header lines" "verifying syntax"
 .cindex "verifying" "header syntax"
 .cindex "&ACL;" "verifying header syntax"
 .cindex "header lines" "verifying syntax"
 .cindex "verifying" "header syntax"


@@ -25616,7 +26254,7 @@ and this condition can be used to reject such messages, though they are not as
 common as they used to be.
 
 .vitem &*verify&~=&~helo*&
 common as they used to be.
 
 .vitem &*verify&~=&~helo*&

-.cindex "&%verify%&" "ACL condition"
+.cindex "&%verify%& ACL condition"

 .cindex "&ACL;" "verifying HELO/EHLO"
 .cindex "HELO" "verifying"
 .cindex "EHLO" "verifying"
 .cindex "&ACL;" "verifying HELO/EHLO"
 .cindex "HELO" "verifying"
 .cindex "EHLO" "verifying"


@@ -25629,15 +26267,13 @@ condition is encountered. See the description of the &%helo_verify_hosts%& and
 &%helo_try_verify_hosts%& options for details of how to request verification
 independently of this condition.
 
 &%helo_try_verify_hosts%& options for details of how to request verification
 independently of this condition.
 

-.new

 For SMTP input that does not come over TCP/IP (the &%-bs%& command line
 option), this condition is always true.
 For SMTP input that does not come over TCP/IP (the &%-bs%& command line
 option), this condition is always true.

-.wen

 
 
 .vitem &*verify&~=&~not_blind*&
 .cindex "verifying" "not blind"
 
 
 .vitem &*verify&~=&~not_blind*&
 .cindex "verifying" "not blind"

-.cindex "bcc recipients" "verifying none"
+.cindex "bcc recipients, verifying none"

 This condition checks that there are no blind (bcc) recipients in the message.
 Every envelope recipient must appear either in a &'To:'& header line or in a
 &'Cc:'& header line for this condition to be true. Local parts are checked
 This condition checks that there are no blind (bcc) recipients in the message.
 Every envelope recipient must appear either in a &'To:'& header line or in a
 &'Cc:'& header line for this condition to be true. Local parts are checked


@@ -25650,11 +26286,11 @@ recipients. This check should not be used on its own for blocking messages.
 
 
 .vitem &*verify&~=&~recipient/*&<&'options'&>
 
 
 .vitem &*verify&~=&~recipient/*&<&'options'&>

-.cindex "&%verify%&" "ACL condition"
+.cindex "&%verify%& ACL condition"

 .cindex "&ACL;" "verifying recipient"
 .cindex "recipient" "verifying"
 .cindex "verifying" "recipient"
 .cindex "&ACL;" "verifying recipient"
 .cindex "recipient" "verifying"
 .cindex "verifying" "recipient"

-.cindex "&$address_data$&"
+.vindex "&$address_data$&"

 This condition is relevant only after a RCPT command. It verifies the current
 recipient. Details of address verification are given later, starting at section
 &<<SECTaddressverification>>&. After a recipient has been verified, the value
 This condition is relevant only after a RCPT command. It verifies the current
 recipient. Details of address verification are given later, starting at section
 &<<SECTaddressverification>>&. After a recipient has been verified, the value


@@ -25665,7 +26301,7 @@ address, and in that case, the subsequent value of &$address_data$& is the
 value for the child address.
 
 .vitem &*verify&~=&~reverse_host_lookup*&
 value for the child address.
 
 .vitem &*verify&~=&~reverse_host_lookup*&

-.cindex "&%verify%&" "ACL condition"
+.cindex "&%verify%& ACL condition"

 .cindex "&ACL;" "verifying host reverse lookup"
 .cindex "host" "verifying reverse lookup"
 This condition ensures that a verified host name has been looked up from the IP
 .cindex "&ACL;" "verifying host reverse lookup"
 .cindex "host" "verifying reverse lookup"
 This condition ensures that a verified host name has been looked up from the IP


@@ -25679,7 +26315,7 @@ If this condition is used for a locally generated message (that is, when there
 is no client host involved), it always succeeds.
 
 .vitem &*verify&~=&~sender/*&<&'options'&>
 is no client host involved), it always succeeds.
 
 .vitem &*verify&~=&~sender/*&<&'options'&>

-.cindex "&%verify%&" "ACL condition"
+.cindex "&%verify%& ACL condition"

 .cindex "&ACL;" "verifying sender"
 .cindex "sender" "verifying"
 .cindex "verifying" "sender"
 .cindex "&ACL;" "verifying sender"
 .cindex "sender" "verifying"
 .cindex "verifying" "sender"


@@ -25688,8 +26324,8 @@ message has been received (the &%acl_smtp_data%& or &%acl_not_smtp%& ACLs). If
 the message's sender is empty (that is, this is a bounce message), the
 condition is true. Otherwise, the sender address is verified.
 
 the message's sender is empty (that is, this is a bounce message), the
 condition is true. Otherwise, the sender address is verified.
 

-.cindex "&$address_data$&"
-.cindex "&$sender_address_data$&"
+.vindex "&$address_data$&"
+.vindex "&$sender_address_data$&"

 If there is data in the &$address_data$& variable at the end of routing, its
 value is placed in &$sender_address_data$& at the end of verification. This
 value can be used in subsequent conditions and modifiers in the same ACL
 If there is data in the &$address_data$& variable at the end of routing, its
 value is placed in &$sender_address_data$& at the end of verification. This
 value can be used in subsequent conditions and modifiers in the same ACL


@@ -25701,7 +26337,7 @@ Details of verification are given later, starting at section
 to avoid doing it more than once per message.
 
 .vitem &*verify&~=&~sender=*&<&'address'&>&*/*&<&'options'&>
 to avoid doing it more than once per message.
 
 .vitem &*verify&~=&~sender=*&<&'address'&>&*/*&<&'options'&>

-.cindex "&%verify%&" "ACL condition"
+.cindex "&%verify%& ACL condition"

 This is a variation of the previous option, in which a modified address is
 verified as a sender.
 .endlist
 This is a variation of the previous option, in which a modified address is
 verified as a sender.
 .endlist


@@ -25768,7 +26404,7 @@ connections (but your local name server cache should be active).
 
 
 
 
 
 

-.section "Specifying the IP address for a DNS list lookup"
+.section "Specifying the IP address for a DNS list lookup" "SECID201"

 .cindex "DNS list" "keyed by explicit IP address"
 By default, the IP address that is used in a DNS list lookup is the IP address
 of the calling host. However, you can specify another IP address by listing it
 .cindex "DNS list" "keyed by explicit IP address"
 By default, the IP address that is used in a DNS list lookup is the IP address
 of the calling host. However, you can specify another IP address by listing it


@@ -25784,7 +26420,7 @@ MX hosts or nameservers of an email sender address. For an example, see section
 
 
 
 
 
 

-.section "DNS lists keyed on domain names"
+.section "DNS lists keyed on domain names" "SECID202"

 .cindex "DNS list" "keyed by domain name"
 There are some lists that are keyed on domain names rather than inverted IP
 addresses (see for example the &'domain based zones'& link at
 .cindex "DNS list" "keyed by domain name"
 There are some lists that are keyed on domain names rather than inverted IP
 addresses (see for example the &'domain based zones'& link at


@@ -25875,11 +26511,13 @@ dnslists = sbl.spahmaus.org/<|192.168.2.3|192.168.5.6|...
 Thus, this example checks whether or not the IP addresses of the sender
 domain's mail servers are on the Spamhaus black list.
 
 Thus, this example checks whether or not the IP addresses of the sender
 domain's mail servers are on the Spamhaus black list.
 

+The key that was used for a successful DNS list lookup is put into the variable
+&$dnslist_matched$& (see section &<<SECID204>>&).

 
 
 
 
 
 
 
 

-.section "Data returned by DNS lists"
+.section "Data returned by DNS lists" "SECID203"

 .cindex "DNS list" "data returned from"
 DNS lists are constructed using address records in the DNS. The original RBL
 just used the address 127.0.0.1 on the right hand side of each record, but the
 .cindex "DNS list" "data returned from"
 DNS lists are constructed using address records in the DNS. The original RBL
 just used the address 127.0.0.1 on the right hand side of each record, but the


@@ -25894,27 +26532,44 @@ The values used on the RBL+ list are:
 127.1.0.6  RSS and DUL
 127.1.0.7  RSS and DUL and RBL
 .endd
 127.1.0.6  RSS and DUL
 127.1.0.7  RSS and DUL and RBL
 .endd

-.new

 Section &<<SECTaddmatcon>>& below describes how you can distinguish between
 Section &<<SECTaddmatcon>>& below describes how you can distinguish between

-different values. Some DNS lists may return more than one address record; they
-are all checked.
-.wen
+different values. Some DNS lists may return more than one address record;
+see section &<<SECThanmuldnsrec>>& for details of how they are checked.

 
 

-.section "Variables set from DNS lists"
-.new
+
+.section "Variables set from DNS lists" "SECID204"
+.cindex "expansion" "variables, set from DNS list"

 .cindex "DNS list" "variables set from"
 .cindex "DNS list" "variables set from"

-.cindex "&$dnslist_domain$&"
-.cindex "&$dnslist_text$&"
-.cindex "&$dnslist_value$&"
-When an entry is found in a DNS list, the variable &$dnslist_domain$&
-contains the name of the domain that matched, and &$dnslist_value$& contains
-the data from the entry. If more than one address record is returned by the DNS
-lookup, all the IP addresses are included in &$dnslist_value$&, separated by
-commas and spaces. The variable &$dnslist_text$& contains the contents of any
-associated TXT record. For lists such as RBL+ the TXT record for a merged entry
-is often not very meaningful. See section &<<SECTmordetinf>>& for a way of
-obtaining more information.
-.wen
+.vindex "&$dnslist_domain$&"
+.vindex "&$dnslist_matched$&"
+.vindex "&$dnslist_text$&"
+.vindex "&$dnslist_value$&"
+When an entry is found in a DNS list, the variable &$dnslist_domain$& contains
+the name of the overall domain that matched (for example,
+&`spamhaus.example`&), &$dnslist_matched$& contains the key within that domain
+(for example, &`192.168.5.3`&), and &$dnslist_value$& contains the data from
+the DNS record. When the key is an IP address, it is not reversed in
+&$dnslist_matched$& (though it is, of course, in the actual lookup). In simple
+cases, for example:
+.code
+deny dnslists = spamhaus.example
+.endd
+the key is also available in another variable (in this case,
+&$sender_host_address$&). In more complicated cases, however, this is not true.
+For example, using a data lookup (as described in section &<<SECTmulkeyfor>>&)
+might generate a dnslists lookup like this:
+.code
+deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|...
+.endd
+If this condition succeeds, the value in &$dnslist_matched$& might be
+&`192.168.6.7`& (for example).
+
+If more than one address record is returned by the DNS lookup, all the IP
+addresses are included in &$dnslist_value$&, separated by commas and spaces.
+The variable &$dnslist_text$& contains the contents of any associated TXT
+record. For lists such as RBL+ the TXT record for a merged entry is often not
+very meaningful. See section &<<SECTmordetinf>>& for a way of obtaining more
+information.

 
 You can use the DNS list variables in &%message%& or &%log_message%& modifiers
 &-- although these appear before the condition in the ACL, they are not
 
 You can use the DNS list variables in &%message%& or &%log_message%& modifiers
 &-- although these appear before the condition in the ACL, they are not


@@ -25937,8 +26592,9 @@ For example,
 deny dnslists = rblplus.mail-abuse.org=127.0.0.2
 .endd
 rejects only those hosts that yield 127.0.0.2. Without this additional data,
 deny dnslists = rblplus.mail-abuse.org=127.0.0.2
 .endd
 rejects only those hosts that yield 127.0.0.2. Without this additional data,

-any address record is considered to be a match. If more than one address record
-is found on the list, they are all checked for a matching right-hand side.
+any address record is considered to be a match. For the moment, we assume
+that the DNS lookup returns just one record. Section &<<SECThanmuldnsrec>>&
+describes how multiple records are handled.

 
 More than one IP address may be given for checking, using a comma as a
 separator. These are alternatives &-- if any one of them matches, the
 
 More than one IP address may be given for checking, using a comma as a
 separator. These are alternatives &-- if any one of them matches, the


@@ -25973,7 +26629,7 @@ an odd number.
 
 
 
 
 
 

-.section "Negated DNS matching conditions"
+.section "Negated DNS matching conditions" "SECID205"

 You can supply a negative list of IP addresses as part of a &%dnslists%&
 condition. Whereas
 .code
 You can supply a negative list of IP addresses as part of a &%dnslists%&
 condition. Whereas
 .code


@@ -26017,7 +26673,72 @@ deny  dnslists = relays.ordb.org
 which is less clear, and harder to maintain.
 
 
 which is less clear, and harder to maintain.
 
 

-.new
+
+
+.section "Handling multiple DNS records from a DNS list" "SECThanmuldnsrec"
+A DNS lookup for a &%dnslists%& condition may return more than one DNS record,
+thereby providing more than one IP address. When an item in a &%dnslists%& list
+is followed by &`=`& or &`&&`& and a list of IP addresses, in order to restrict
+the match to specific results from the DNS lookup, there are two ways in which
+the checking can be handled. For example, consider the condition:
+.code
+dnslists = a.b.c=127.0.0.1
+.endd
+What happens if the DNS lookup for the incoming IP address yields both
+127.0.0.1 and 127.0.0.2 by means of two separate DNS records? Is the
+condition true because at least one given value was found, or is it false
+because at least one of the found values was not listed? And how does this
+affect negated conditions? Both possibilities are provided for with the help of
+additional separators &`==`& and &`=&&`&.
+
+.ilist
+If &`=`& or &`&&`& is used, the condition is true if any one of the looked up
+IP addresses matches one of the listed addresses. For the example above, the
+condition is true because 127.0.0.1 matches.
+.next
+If &`==`& or &`=&&`& is used, the condition is true only if every one of the
+looked up IP addresses matches one of the listed addresses. If the condition is
+changed to:
+.code
+dnslists = a.b.c==127.0.0.1
+.endd
+and the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
+false because 127.0.0.2 is not listed. You would need to have:
+.code
+dnslists = a.b.c==127.0.0.1,127.0.0.2
+.endd
+for the condition to be true.
+.endlist
+
+When &`!`& is used to negate IP address matching, it inverts the result, giving
+the precise opposite of the behaviour above. Thus:
+.ilist
+If &`!=`& or &`!&&`& is used, the condition is true if none of the looked up IP
+addresses matches one of the listed addresses. Consider:
+.code
+dnslists = a.b.c!&0.0.0.1
+.endd
+If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
+false because 127.0.0.1 matches.
+.next
+If &`!==`& or &`!=&&`& is used, the condition is true there is at least one
+looked up IP address that does not match. Consider:
+.code
+dnslists = a.b.c!=&0.0.0.1
+.endd
+If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
+true, because 127.0.0.2 does not match. You would need to have:
+.code
+dnslists = a.b.c!=&0.0.0.1,0.0.0.2
+.endd
+for the condition to be false.
+.endlist
+When the DNS lookup yields only a single IP address, there is no difference
+between &`=`& and &`==`& and between &`&&`& and &`=&&`&.
+
+
+
+

 .section "Detailed information from merged DNS lists" "SECTmordetinf"
 .cindex "DNS list" "information from merged"
 When the facility for restricting the matching IP values in a DNS list is used,
 .section "Detailed information from merged DNS lists" "SECTmordetinf"
 .cindex "DNS list" "information from merged"
 When the facility for restricting the matching IP values in a DNS list is used,


@@ -26038,7 +26759,7 @@ a check that the IP being tested is indeed on the first list. The first
 domain is the one that is put in &$dnslist_domain$&. For example:
 .code
 reject message  = \
 domain is the one that is put in &$dnslist_domain$&. For example:
 .code
 reject message  = \

-         rejected because $sender_ip_address is blacklisted \
+         rejected because $sender_host_address is blacklisted \

          at $dnslist_domain\n$dnslist_text
        dnslists = \
          sbl.spamhaus.org,sbl-xbl.spamhaus.org=127.0.0.2 : \
          at $dnslist_domain\n$dnslist_text
        dnslists = \
          sbl.spamhaus.org,sbl-xbl.spamhaus.org=127.0.0.2 : \


@@ -26064,7 +26785,6 @@ reject dnslists = \
 In this case there is one lookup in &'dnsbl.sorbs.net'&, and if none of the IP
 values matches (or if no record is found), this is the only lookup that is
 done. Only if there is a match is one of the more specific lists consulted.
 In this case there is one lookup in &'dnsbl.sorbs.net'&, and if none of the IP
 values matches (or if no record is found), this is the only lookup that is
 done. Only if there is a match is one of the more specific lists consulted.

-.wen

 
 
 
 
 
 


@@ -26094,7 +26814,7 @@ deny   condition = ${if isip4{$sender_host_address}}
        dnslists  = some.list.example
 .endd
 
        dnslists  = some.list.example
 .endd
 

-.section "Rate limiting senders" "SECTratelimiting"
+.section "Rate limiting incoming messages" "SECTratelimiting"

 .cindex "rate limiting" "client sending"
 .cindex "limiting client sending rates"
 .oindex "&%smtp_ratelimit_*%&"
 .cindex "rate limiting" "client sending"
 .cindex "limiting client sending rates"
 .oindex "&%smtp_ratelimit_*%&"


@@ -26141,17 +26861,24 @@ user, independent of the computer they are sending from, set the key to
 example, &$authenticated_id$& is only meaningful if the client has
 authenticated, and you can check with the &%authenticated%& ACL condition.
 
 example, &$authenticated_id$& is only meaningful if the client has
 authenticated, and you can check with the &%authenticated%& ACL condition.
 

+If you want to limit the rate at which a recipient receives messages, you can
+use the key &`$local_part@$domain`& with the &%per_rcpt%& option (see below) in
+a RCPT ACL.
+

 Internally, Exim includes the smoothing constant &'p'& and the options in the
 lookup key because they alter the meaning of the stored data. This is not true
 for the limit &'m'&, so you can alter the configured maximum rate and Exim will
 still remember clients' past behaviour, but if you alter the other ratelimit
 parameters Exim forgets past behaviour.
 
 Internally, Exim includes the smoothing constant &'p'& and the options in the
 lookup key because they alter the meaning of the stored data. This is not true
 for the limit &'m'&, so you can alter the configured maximum rate and Exim will
 still remember clients' past behaviour, but if you alter the other ratelimit
 parameters Exim forgets past behaviour.
 

-Each &%ratelimit%& condition can have up to two options. The first option
+Each &%ratelimit%& condition can have up to three options. One option

 specifies what Exim measures the rate of, and the second specifies how Exim
 specifies what Exim measures the rate of, and the second specifies how Exim

-handles excessively fast clients. The options are separated by a slash, like
-the other parameters.
+handles excessively fast clients. The third option can be &`noupdate`&, to
+disable updating of the ratelimiting database (see section &<<rearatdat>>&).
+The options are separated by a slash, like the other parameters. They may
+appear in any order.

 
 

+.section "Ratelimit options for what is being measured" "ratoptmea"

 The &%per_conn%& option limits the client's connection rate.
 
 The &%per_mail%& option limits the client's rate of sending messages. This is
 The &%per_conn%& option limits the client's connection rate.
 
 The &%per_mail%& option limits the client's rate of sending messages. This is


@@ -26163,13 +26890,25 @@ relies on the SIZE parameter on the MAIL command, which may be inaccurate or
 completely missing. You can follow the limit &'m'& in the configuration with K,
 M, or G to specify limits in kilobytes, megabytes, or gigabytes, respectively.
 
 completely missing. You can follow the limit &'m'& in the configuration with K,
 M, or G to specify limits in kilobytes, megabytes, or gigabytes, respectively.
 

+.new
+The &%per_rcpt%& option causes Exim to limit the rate at which
+recipients are accepted. To be effective, it would need to be used in
+either the &%acl_smtp_rcpt%& or the &%acl_not_smtp%& ACL. In the
+&%acl_smtp_rcpt%& ACL, the number of recipients is incremented by one.
+In the case of a locally submitted message in the &%acl_not_smtp%& ACL,
+the number of recipients incremented is equal to &%$recipients_count%&
+for the entire message. Note that in either case the rate limiting
+engine will see a message with many recipients as a large high-speed
+burst.
+

 The &%per_cmd%& option causes Exim to recompute the rate every time the
 The &%per_cmd%& option causes Exim to recompute the rate every time the

-condition is processed. This can be used to limit the SMTP command rate. The
-alias &%per_rcpt%& is provided for use in the RCPT ACL instead of &%per_cmd%&
-to make it clear that the effect is to limit the rate at which recipients are
-accepted. Note that in this case the rate limiting engine will see a message
-with many recipients as a large high-speed burst.
+condition is processed. This can be used to limit the SMTP command rate.
+This command is essentially an alias of &%per_rcpt%& to make it clear
+that the effect is to limit the rate at which individual commands,
+rather than recipients, are accepted.
+.wen

 
 

+.section "Ratelimit options for handling fast clients" "ratophanfas"

 If a client's average rate is greater than the maximum, the rate limiting
 engine can react in two possible ways, depending on the presence of the
 &%strict%& or &%leaky%& options. This is independent of the other
 If a client's average rate is greater than the maximum, the rate limiting
 engine can react in two possible ways, depending on the presence of the
 &%strict%& or &%leaky%& options. This is independent of the other


@@ -26179,23 +26918,25 @@ over-aggressive retry rate preventing it from getting any email through.
 
 The &%strict%& option means that the client's recorded rate is always updated.
 The effect of this is that Exim measures the client's average rate of attempts
 
 The &%strict%& option means that the client's recorded rate is always updated.
 The effect of this is that Exim measures the client's average rate of attempts

-to send email, which can be much higher than the maximum. If the client is over
-the limit it will be subjected to counter-measures until it slows down below
-the maximum rate. The smoothing period determines the time it takes for a high
-sending rate to decay exponentially to 37% of its peak value, which means that
-you can work out the time (the number of smoothing periods) that a client is
-subjected to counter-measures after an over-limit burst with this formula:
+to send email, which can be much higher than the maximum &new("it is actually
+allowed. If the client is over the limit it may be subjected to
+counter-measures in the ACL until it slows down below the maximum rate.") The
+smoothing period determines the time it takes for a high sending rate to decay
+exponentially to 37% of its peak value, which means that you can work out the
+time (the number of smoothing periods) that a client is subjected to
+counter-measures after an over-limit burst with this formula:

 .code
 ln(peakrate/maxrate)
 .endd
 .code
 ln(peakrate/maxrate)
 .endd

-The &%leaky%& option means that the client's recorded rate is not updated if it
-is above the limit. The effect of this is that Exim measures the client's
-average rate of successfully sent email, which cannot be greater than the
-maximum. If the client is over the limit it &new("may suffer some
-counter-measures (as specified in the ACL)"), but it will still be able to send
+The &%leaky%& (default) option means that the client's recorded rate is not
+updated if it is above the limit. The effect of this is that Exim measures the
+client's average rate of successfully sent email, which cannot be greater than
+the maximum allowed. If the client is over the limit it may suffer some
+counter-measures (as specified in the ACL), but it will still be able to send

 email at the configured maximum rate, whatever the rate of its attempts. This
 is generally the better choice if you have clients that retry automatically.
 
 email at the configured maximum rate, whatever the rate of its attempts. This
 is generally the better choice if you have clients that retry automatically.
 

+.section "Using rate limiting" "useratlim"

 Exim's other ACL facilities are used to define what counter-measures are taken
 when the rate limit is exceeded. This might be anything from logging a warning
 (for example, while measuring existing sending rates in order to define
 Exim's other ACL facilities are used to define what counter-measures are taken
 when the rate limit is exceeded. This might be anything from logging a warning
 (for example, while measuring existing sending rates in order to define


@@ -26237,6 +26978,37 @@ this means that Exim will lose its hints data after a reboot (including retry
 hints, the callout cache, and ratelimit data).
 
 
 hints, the callout cache, and ratelimit data).
 
 

+.section "Reading ratelimit data without updating" "rearatdat"
+.cindex "rate limitint" "reading data without updating"
+If the &%noupdate%& option is present on a &%ratelimit%& ACL condition, Exim
+computes the rate and checks the limit as normal, but it does not update the
+saved data. This means that, in relevant ACLs, it is possible to lookup the
+existence of a specified (or auto-generated) ratelimit key without incrementing
+the ratelimit counter for that key. In order for this to be useful, another ACL
+entry must set the rate for the same key (otherwise it will always be zero).
+For example:
+.code
+acl_check_connect:
+  deny ratelimit = 100 / 5m / strict / noupdate
+       log_message = RATE: $sender_rate/$sender_rate_period \
+                     (max $sender_rate_limit)
+.endd
+.display
+&'... some other logic and tests...'&
+.endd
+.code
+acl_check_mail:
+  warn ratelimit = 100 / 5m / strict / per_cmd
+       condition = ${if le{$sender_rate}{$sender_rate_limit}}
+       logwrite  = RATE UPDATE: $sender_rate/$sender_rate_period \
+                     (max $sender_rate_limit)
+.endd
+In this example, the rate is tested and used to deny access (when it is too
+high) in the connect ACL, but the actual computation of the remembered rate
+happens later, on a per-command basis, in another ACL.
+
+
+

 .section "Address verification" "SECTaddressverification"
 .cindex "verifying address" "options for"
 .cindex "policy control" "address verification"
 .section "Address verification" "SECTaddressverification"
 .cindex "verifying address" "options for"
 .cindex "policy control" "address verification"


@@ -26277,9 +27049,9 @@ discussion in section &<<SECTredirwhilveri>>&.
 .endlist
 
 .cindex "verifying address" "differentiating failures"
 .endlist
 
 .cindex "verifying address" "differentiating failures"

-.cindex "&$recipient_verify_failure$&"
-.cindex "&$sender_verify_failure$&"
-.cindex "&$acl_verify_message$&"
+.vindex "&$recipient_verify_failure$&"
+.vindex "&$sender_verify_failure$&"
+.vindex "&$acl_verify_message$&"

 After an address verification failure, &$acl_verify_message$& contains the
 error message that is associated with the failure. It can be preserved by
 coding like this:
 After an address verification failure, &$acl_verify_message$& contains the
 error message that is associated with the failure. It can be preserved by
 coding like this:


@@ -26351,7 +27123,6 @@ router that does not set up hosts routes to an &(smtp)& transport with a
 &%hosts_override%& set, its hosts are always used, whether or not the router
 supplies a host list.
 
 &%hosts_override%& set, its hosts are always used, whether or not the router
 supplies a host list.
 

-.new

 The port that is used is taken from the transport, if it is specified and is a
 remote transport. (For routers that do verification only, no transport need be
 specified.) Otherwise, the default SMTP port is used. If a remote transport
 The port that is used is taken from the transport, if it is specified and is a
 remote transport. (For routers that do verification only, no transport need be
 specified.) Otherwise, the default SMTP port is used. If a remote transport


@@ -26369,7 +27140,6 @@ following SMTP commands are sent:
 &`RCPT TO:`&<&'the address to be tested'&>
 &`QUIT`&
 .endd
 &`RCPT TO:`&<&'the address to be tested'&>
 &`QUIT`&
 .endd

-.wen

 LHLO is used instead of HELO if the transport's &%protocol%& option is
 set to &"lmtp"&.
 
 LHLO is used instead of HELO if the transport's &%protocol%& option is
 set to &"lmtp"&.
 


@@ -26386,6 +27156,11 @@ Exim tries the next host, if any. If there is a problem with all the remote
 hosts, the ACL yields &"defer"&, unless the &%defer_ok%& parameter of the
 &%callout%& option is given, in which case the condition is forced to succeed.
 
 hosts, the ACL yields &"defer"&, unless the &%defer_ok%& parameter of the
 &%callout%& option is given, in which case the condition is forced to succeed.
 

+.cindex "SMTP" "output flushing, disabling for callout"
+A callout may take a little time. For this reason, Exim normally flushes SMTP
+output before performing a callout in an ACL, to avoid unexpected timeouts in
+clients when the SMTP PIPELINING extension is in use. The flushing can be
+disabled by using a &%control%& modifier to set &%no_callout_flush%&.

 
 
 
 
 
 


@@ -26404,19 +27179,19 @@ deprecated. The additional parameters for &%callout%& are as follows:
 
 .vlist
 .vitem <&'a&~time&~interval'&>
 
 .vlist
 .vitem <&'a&~time&~interval'&>

-.cindex "callout timeout" "specifying"
+.cindex "callout" "timeout, specifying"

 This specifies the timeout that applies for the callout attempt to each host.
 For example:
 .code
 verify = sender/callout=5s
 .endd
 The default is 30 seconds. The timeout is used for each response from the
 This specifies the timeout that applies for the callout attempt to each host.
 For example:
 .code
 verify = sender/callout=5s
 .endd
 The default is 30 seconds. The timeout is used for each response from the

-remote host. It is also used for the intial connection, unless overridden by
+remote host. It is also used for the initial connection, unless overridden by

 the &%connect%& parameter.
 
 
 .vitem &*connect&~=&~*&<&'time&~interval'&>
 the &%connect%& parameter.
 
 
 .vitem &*connect&~=&~*&<&'time&~interval'&>

-.cindex "callout connection timeout" "specifying"
+.cindex "callout" "connection timeout, specifying"

 This parameter makes it possible to set a different (usually smaller) timeout
 for making the SMTP connection. For example:
 .code
 This parameter makes it possible to set a different (usually smaller) timeout
 for making the SMTP connection. For example:
 .code


@@ -26425,7 +27200,7 @@ verify = sender/callout=5s,connect=1s
 If not specified, this timeout defaults to the general timeout value.
 
 .vitem &*defer_ok*&
 If not specified, this timeout defaults to the general timeout value.
 
 .vitem &*defer_ok*&

-.cindex "callout defer" "action on"
+.cindex "callout" "defer, action on"

 When this parameter is present, failure to contact any host, or any other kind
 of temporary error, is treated as success by the ACL. However, the cache is not
 updated in this circumstance.
 When this parameter is present, failure to contact any host, or any other kind
 of temporary error, is treated as success by the ACL. However, the cache is not
 updated in this circumstance.


@@ -26455,7 +27230,7 @@ This parameter is available only for the &%header_sender%& verification option.
 
 
 .vitem &*maxwait&~=&~*&<&'time&~interval'&>
 
 
 .vitem &*maxwait&~=&~*&<&'time&~interval'&>

-.cindex "callout overall timeout" "specifying"
+.cindex "callout" "overall timeout, specifying"

 This parameter sets an overall timeout for performing a callout verification.
 For example:
 .code
 This parameter sets an overall timeout for performing a callout verification.
 For example:
 .code


@@ -26469,13 +27244,13 @@ very long delays if there are a large number of hosts and all are timing out
 
 
 .vitem &*no_cache*&
 
 
 .vitem &*no_cache*&

-.cindex "callout cache" "suppressing"
-.cindex "caching callout" "suppressing"
+.cindex "callout" "cache, suppressing"
+.cindex "caching callout, suppressing"

 When this parameter is given, the callout cache is neither read nor updated.
 
 .vitem &*postmaster*&
 .cindex "callout" "postmaster; checking"
 When this parameter is given, the callout cache is neither read nor updated.
 
 .vitem &*postmaster*&
 .cindex "callout" "postmaster; checking"

-When this parameter is set, a sucessful callout check is followed by a similar
+When this parameter is set, a successful callout check is followed by a similar

 check for the local part &'postmaster'& at the same domain. If this address is
 rejected, the callout fails (but see &%fullpostmaster%& above). The result of
 the postmaster check is recorded in a cache record; if it is a failure, this is
 check for the local part &'postmaster'& at the same domain. If this address is
 rejected, the callout fails (but see &%fullpostmaster%& above). The result of
 the postmaster check is recorded in a cache record; if it is a failure, this is


@@ -26521,7 +27296,7 @@ This parameter applies to recipient callouts only. For example:
 .code
 deny  !verify = recipient/callout=use_postmaster
 .endd
 .code
 deny  !verify = recipient/callout=use_postmaster
 .endd

-.cindex "&$qualify_domain$&"
+.vindex "&$qualify_domain$&"

 It causes a non-empty postmaster address to be used in the MAIL command when
 performing the callout for the recipient, and also for a &"random"& check if
 that is configured. The local part of the address is &`postmaster`& and the
 It causes a non-empty postmaster address to be used in the MAIL command when
 performing the callout for the recipient, and also for a &"random"& check if
 that is configured. The local part of the address is &`postmaster`& and the


@@ -26565,7 +27340,7 @@ actual callouts are performed than when an empty sender or postmaster is used.
 
 .section "Callout caching" "SECTcallvercache"
 .cindex "hints database" "callout cache"
 
 .section "Callout caching" "SECTcallvercache"
 .cindex "hints database" "callout cache"

-.cindex "callout" "caching"
+.cindex "callout" "cache, description of"

 .cindex "caching" "callout"
 Exim caches the results of callouts in order to reduce the amount of resources
 used, unless you specify the &%no_cache%& parameter with the &%callout%&
 .cindex "caching" "callout"
 Exim caches the results of callouts in order to reduce the amount of resources
 used, unless you specify the &%no_cache%& parameter with the &%callout%&


@@ -26672,12 +27447,10 @@ require verify = recipient/success_on_redirect/callout=10s
 In this example, verification succeeds if a router generates a new address, and
 the callout does not occur, because no address was routed to a remote host.
 
 In this example, verification succeeds if a router generates a new address, and
 the callout does not occur, because no address was routed to a remote host.
 

-.new

 When verification is being tested via the &%-bv%& option, the treatment of
 redirections is as just described, unless the &%-v%& or any debugging option is
 also specified. In that case, full verification is done for every generated
 address and a report is output for each of them.
 When verification is being tested via the &%-bv%& option, the treatment of
 redirections is as just described, unless the &%-v%& or any debugging option is
 also specified. In that case, full verification is done for every generated
 address and a report is output for each of them.

-.wen

 
 
 
 
 
 


@@ -26757,7 +27530,7 @@ authorization required but absent, or &"?"& for unknown.
 
 
 .section "Bounce address tag validation" "SECTverifyPRVS"
 
 
 .section "Bounce address tag validation" "SECTverifyPRVS"

-.cindex "BATV" "verifying"
+.cindex "BATV, verifying"

 Bounce address tag validation (BATV) is a scheme whereby the envelope senders
 of outgoing messages have a cryptographic, timestamped &"tag"& added to them.
 Genuine incoming bounce messages should therefore always be addressed to
 Bounce address tag validation (BATV) is a scheme whereby the envelope senders
 of outgoing messages have a cryptographic, timestamped &"tag"& added to them.
 Genuine incoming bounce messages should therefore always be addressed to


@@ -26786,7 +27559,7 @@ list called &%batv_senders%&. Then, in the ACL for RCPT commands, you could
 use this:
 .code
 # Bounces: drop unsigned addresses for BATV senders
 use this:
 .code
 # Bounces: drop unsigned addresses for BATV senders

-deny message = This address does not send an unsigned reverse path.
+deny message = This address does not send an unsigned reverse path

      senders = :
      recipients = +batv_senders
 
      senders = :
      recipients = +batv_senders
 


@@ -26983,7 +27756,7 @@ EXPERIMENTAL_ in &_Local/Makefile_&. Such features are not documented in
 this manual. You can find out about them by reading the file called
 &_doc/experimental.txt_&.
 
 this manual. You can find out about them by reading the file called
 &_doc/experimental.txt_&.
 

-All the content-scanning facilites work on a MBOX copy of the message that is
+All the content-scanning facilities work on a MBOX copy of the message that is

 temporarily created in a file called:
 .display
 <&'spool_directory'&>&`/scan/`&<&'message_id'&>/<&'message_id'&>&`.eml`&
 temporarily created in a file called:
 .display
 <&'spool_directory'&>&`/scan/`&<&'message_id'&>/<&'message_id'&>&`.eml`&


@@ -27010,7 +27783,7 @@ It supports a &"generic"& interface to scanners called via the shell, and
 specialized interfaces for &"daemon"& type virus scanners, which are resident
 in memory and thus are much faster.
 
 specialized interfaces for &"daemon"& type virus scanners, which are resident
 in memory and thus are much faster.
 

-.cindex "&%av_scanner%&"
+.oindex "&%av_scanner%&"

 You can set the &%av_scanner%& option in first part of the Exim configuration
 file to specify which scanner to use, together with any additional options that
 are needed. The basic syntax is as follows:
 You can set the &%av_scanner%& option in first part of the Exim configuration
 file to specify which scanner to use, together with any additional options that
 are needed. The basic syntax is as follows:


@@ -27076,7 +27849,6 @@ For example, Sophos Sweep reports a virus on a line like this:
 .code
 Virus 'W32/Magistr-B' found in file ./those.bat
 .endd
 .code
 Virus 'W32/Magistr-B' found in file ./those.bat
 .endd

-.new

 For the trigger expression, we can match the phrase &"found in file"&. For the
 name expression, we want to extract the W32/Magistr-B string, so we can match
 for the single quotes left and right of it. Altogether, this makes the
 For the trigger expression, we can match the phrase &"found in file"&. For the
 name expression, we want to extract the W32/Magistr-B string, so we can match
 for the single quotes left and right of it. Altogether, this makes the


@@ -27177,7 +27949,7 @@ You can append &`/defer_ok`& to the &%malware%& condition to accept messages
 even if there is a problem with the virus scanner. Otherwise, such a problem
 causes the ACL to defer.
 
 even if there is a problem with the virus scanner. Otherwise, such a problem
 causes the ACL to defer.
 

-.cindex "&$malware_name$&"
+.vindex "&$malware_name$&"

 When a virus is found, the condition sets up an expansion variable called
 &$malware_name$& that contains the name of the virus. You can use it in a
 &%message%& modifier that specifies the error returned to the sender, and/or in
 When a virus is found, the condition sets up an expansion variable called
 &$malware_name$& that contains the name of the virus. You can use it in a
 &%message%& modifier that specifies the error returned to the sender, and/or in


@@ -27219,7 +27991,7 @@ deny message = This message contains malware ($malware_name)
 .section "Scanning with SpamAssassin" "SECTscanspamass"
 .cindex "content scanning" "for spam"
 .cindex "spam scanning"
 .section "Scanning with SpamAssassin" "SECTscanspamass"
 .cindex "content scanning" "for spam"
 .cindex "spam scanning"

-.cindex "SpamAssassin" "scanning with"
+.cindex "SpamAssassin"

 The &%spam%& ACL condition calls SpamAssassin's &%spamd%& daemon to get a spam
 score and a report for the message. You can get SpamAssassin at
 &url(http://www.spamassassin.org), or, if you have a working Perl
 The &%spam%& ACL condition calls SpamAssassin's &%spamd%& daemon to get a spam
 score and a report for the message. You can get SpamAssassin at
 &url(http://www.spamassassin.org), or, if you have a working Perl


@@ -27231,7 +28003,7 @@ SpamAssassin has its own set of configuration files. Please review its
 documentation to see how you can tweak it. The default installation should work
 nicely, however.
 
 documentation to see how you can tweak it. The default installation should work
 nicely, however.
 

-.cindex "&%spamd_address%&"
+.oindex "&%spamd_address%&"

 After having installed and configured SpamAssassin, start the &%spamd%& daemon.
 By default, it listens on 127.0.0.1, TCP port 783. If you use another host or
 port for &%spamd%&, you must set the &%spamd_address%& option in the global
 After having installed and configured SpamAssassin, start the &%spamd%& daemon.
 By default, it listens on 127.0.0.1, TCP port 783. If you use another host or
 port for &%spamd%&, you must set the &%spamd_address%& option in the global


@@ -27264,13 +28036,12 @@ condition defers.
 multiple &%spamd%& servers.
 
 
 multiple &%spamd%& servers.
 
 

-.section "Calling SpamAssassin from an Exim ACL"
+.section "Calling SpamAssassin from an Exim ACL" "SECID206"

 Here is a simple example of the use of the &%spam%& condition in a DATA ACL:
 .code
 deny message = This message was classified as SPAM
      spam = joe
 .endd
 Here is a simple example of the use of the &%spam%& condition in a DATA ACL:
 .code
 deny message = This message was classified as SPAM
      spam = joe
 .endd

-.new

 The right-hand side of the &%spam%& condition specifies a name. This is
 relevant if you have set up multiple SpamAssassin profiles. If you do not want
 to scan using a specific profile, but rather use the SpamAssassin system-wide
 The right-hand side of the &%spam%& condition specifies a name. This is
 relevant if you have set up multiple SpamAssassin profiles. If you do not want
 to scan using a specific profile, but rather use the SpamAssassin system-wide


@@ -27287,11 +28058,10 @@ are not set.
 The right-hand side of the &%spam%& condition is expanded before being used, so
 you can put lookups or conditions there. When the right-hand side evaluates to
 &"0"& or &"false"&, no scanning is done and the condition fails immediately.
 The right-hand side of the &%spam%& condition is expanded before being used, so
 you can put lookups or conditions there. When the right-hand side evaluates to
 &"0"& or &"false"&, no scanning is done and the condition fails immediately.

-.wen

 
 
 Scanning with SpamAssassin uses a lot of resources. If you scan every message,
 
 
 Scanning with SpamAssassin uses a lot of resources. If you scan every message,

-large ones may cause significant performance degredation. As most spam messages
+large ones may cause significant performance degradation. As most spam messages

 are quite small, it is recommended that you do not scan the big ones. For
 example:
 .code
 are quite small, it is recommended that you do not scan the big ones. For
 example:
 .code


@@ -27373,8 +28143,8 @@ deny  message = This message scored $spam_score spam points.
 .section "Scanning MIME parts" "SECTscanmimepart"
 .cindex "content scanning" "MIME parts"
 .cindex "MIME content scanning"
 .section "Scanning MIME parts" "SECTscanmimepart"
 .cindex "content scanning" "MIME parts"
 .cindex "MIME content scanning"

-.cindex "&%acl_smtp_mime%&"
-.cindex "&%acl_not_smtp_mime%&"
+.oindex "&%acl_smtp_mime%&"
+.oindex "&%acl_not_smtp_mime%&"

 The &%acl_smtp_mime%& global option specifies an ACL that is called once for
 each MIME part of an SMTP message, including multipart types, in the sequence
 of their position in the message. Similarly, the &%acl_not_smtp_mime%& option
 The &%acl_smtp_mime%& global option specifies an ACL that is called once for
 each MIME part of an SMTP message, including multipart types, in the sequence
 of their position in the message. Similarly, the &%acl_not_smtp_mime%& option


@@ -27382,13 +28152,13 @@ specifies an ACL that is used for the MIME parts of non-SMTP messages. These
 options may both refer to the same ACL if you want the same processing in both
 cases.
 
 options may both refer to the same ACL if you want the same processing in both
 cases.
 

-These ACLs are called (possibly many times) just before the
-&%acl_smtp_data%& ACL in the case of an SMTP message, or just before the
-&%acl_not_smtp%& ACL in the case of a non-SMTP message. However, a MIME ACL
-is called only if the message contains a &'MIME-Version:'& header line. When a
-call to a MIME ACL does not yield &"accept"&, ACL processing is aborted and the
-appropriate result code is sent to the client. In the case of an SMTP message,
-the &%acl_smtp_data%& ACL is not called when this happens.
+These ACLs are called (possibly many times) just before the &%acl_smtp_data%&
+ACL in the case of an SMTP message, or just before the &%acl_not_smtp%& ACL in
+the case of a non-SMTP message. However, a MIME ACL is called only if the
+message contains a &new(&'Content-Type:'&) header line. When a call to a MIME
+ACL does not yield &"accept"&, ACL processing is aborted and the appropriate
+result code is sent to the client. In the case of an SMTP message, the
+&%acl_smtp_data%& ACL is not called when this happens.

 
 You cannot use the &%malware%& or &%spam%& conditions in a MIME ACL; these can
 only be used in the DATA or non-SMTP ACLs. However, you can use the &%regex%&
 
 You cannot use the &%malware%& or &%spam%& conditions in a MIME ACL; these can
 only be used in the DATA or non-SMTP ACLs. However, you can use the &%regex%&


@@ -27400,8 +28170,8 @@ At the start of a MIME ACL, a number of variables are set from the header
 information for the relevant MIME part. These are described below. The contents
 of the MIME part are not by default decoded into a disk file except for MIME
 parts whose content-type is &"message/rfc822"&. If you want to decode a MIME
 information for the relevant MIME part. These are described below. The contents
 of the MIME part are not by default decoded into a disk file except for MIME
 parts whose content-type is &"message/rfc822"&. If you want to decode a MIME

-part into a disk file, you can use the &%decode%& modifier. The general syntax
-is:
+part into a disk file, you can use the &%decode%& condition. The general
+syntax is:

 .display
 &`decode = [/`&<&'path'&>&`/]`&<&'filename'&>
 .endd
 .display
 &`decode = [/`&<&'path'&>&`/]`&<&'filename'&>
 .endd


@@ -27424,8 +28194,9 @@ the full path and file name.
 If the string does not start with a slash, it is used as the
 filename, and the default path is then used.
 .endlist
 If the string does not start with a slash, it is used as the
 filename, and the default path is then used.
 .endlist

-
-You can easily decode a file with its original, proposed filename using
+The &%decode%& condition normally succeeds. It is only false for syntax
+errors or unusual circumstances such as memory shortages. You can easily decode
+a file with its original, proposed filename using

 .code
 decode = $mime_filename
 .endd
 .code
 decode = $mime_filename
 .endd


@@ -27521,7 +28292,7 @@ found, this variable contains the empty string.
 
 .vitem &$mime_is_coverletter$&
 This variable attempts to differentiate the &"cover letter"& of an e-mail from
 
 .vitem &$mime_is_coverletter$&
 This variable attempts to differentiate the &"cover letter"& of an e-mail from

-attached data. It can be used to clamp down on flashy or unneccessarily encoded
+attached data. It can be used to clamp down on flashy or unnecessarily encoded

 content in the cover letter, while not restricting attachments at all.
 
 The variable contains 1 (true) for a MIME part believed to be part of the
 content in the cover letter, while not restricting attachments at all.
 
 The variable contains 1 (true) for a MIME part believed to be part of the


@@ -27627,7 +28398,7 @@ The &%demime%& condition unpacks MIME containers in the message. It detects
 errors in MIME containers and can match file extensions found in the message
 against a list. Using this facility produces files containing the unpacked MIME
 parts of the message in the temporary scan directory. If you do antivirus
 errors in MIME containers and can match file extensions found in the message
 against a list. Using this facility produces files containing the unpacked MIME
 parts of the message in the temporary scan directory. If you do antivirus

-scanning, it is recommened that you use the &%demime%& condition before the
+scanning, it is recommended that you use the &%demime%& condition before the

 antivirus (&%malware%&) condition.
 
 On the right-hand side of the &%demime%& condition you can pass a
 antivirus (&%malware%&) condition.
 
 On the right-hand side of the &%demime%& condition you can pass a


@@ -27650,21 +28421,21 @@ The &%demime%& condition set the following variables:
 
 .vlist
 .vitem &$demime_errorlevel$&
 
 .vlist
 .vitem &$demime_errorlevel$&

-.cindex "&$demime_errorlevel$&"
+.vindex "&$demime_errorlevel$&"

 When an error is detected in a MIME container, this variable contains the
 severity of the error, as an integer number. The higher the value, the more
 severe the error (the current maximum value is 3). If this variable is unset or
 zero, no error occurred.
 
 .vitem &$demime_reason$&
 When an error is detected in a MIME container, this variable contains the
 severity of the error, as an integer number. The higher the value, the more
 severe the error (the current maximum value is 3). If this variable is unset or
 zero, no error occurred.
 
 .vitem &$demime_reason$&

-.cindex "&$demime_reason$&"
+.vindex "&$demime_reason$&"

 When &$demime_errorlevel$& is greater than zero, this variable contains a
 human-readable text string describing the MIME error that occurred.
 .endlist
 
 .vlist
 .vitem &$found_extension$&
 When &$demime_errorlevel$& is greater than zero, this variable contains a
 human-readable text string describing the MIME error that occurred.
 .endlist
 
 .vlist
 .vitem &$found_extension$&

-.cindex "&$found_extension$&"
+.vindex "&$found_extension$&"

 When the &%demime%& condition is true, this variable contains the file
 extension it found.
 .endlist
 When the &%demime%& condition is true, this variable contains the file
 extension it found.
 .endlist


@@ -27737,7 +28508,7 @@ code. The incident is logged on the main and reject logs.
 
 
 
 
 
 

-.section "Building Exim to use a local scan function"
+.section "Building Exim to use a local scan function" "SECID207"

 .cindex "&[local_scan()]& function" "building Exim to use"
 To make use of the local scan function feature, you must tell Exim where your
 function is before building Exim, by setting LOCAL_SCAN_SOURCE in your
 .cindex "&[local_scan()]& function" "building Exim to use"
 To make use of the local scan function feature, you must tell Exim where your
 function is before building Exim, by setting LOCAL_SCAN_SOURCE in your


@@ -27808,7 +28579,7 @@ The function must return an &%int%& value which is one of the following macros:
 
 .vlist
 .vitem &`LOCAL_SCAN_ACCEPT`&
 
 .vlist
 .vitem &`LOCAL_SCAN_ACCEPT`&

-.cindex "&$local_scan_data$&"
+.vindex "&$local_scan_data$&"

 The message is accepted. If you pass back a string of text, it is saved with
 the message, and made available in the variable &$local_scan_data$&. No
 newlines are permitted (if there are any, they are turned into spaces) and the
 The message is accepted. If you pass back a string of text, it is saved with
 the message, and made available in the variable &$local_scan_data$&. No
 newlines are permitted (if there are any, they are turned into spaces) and the


@@ -27918,7 +28689,7 @@ This is the same as &%opt_int%&, except that when such a value is output in a
 printed with the suffix K or M.
 
 .vitem &*opt_octint*&
 printed with the suffix K or M.
 
 .vitem &*opt_octint*&

-This also specifies an integer, but the value is always interpeted as an
+This also specifies an integer, but the value is always interpreted as an

 octal integer, whether or not it starts with the digit zero, and it is
 always output in octal.
 
 octal integer, whether or not it starts with the digit zero, and it is
 always output in octal.
 


@@ -27936,14 +28707,21 @@ out the values of all the &[local_scan()]& options.
 
 
 
 
 
 

-.section "Available Exim variables"
+.section "Available Exim variables" "SECID208"

 .cindex "&[local_scan()]& function" "available Exim variables"
 The header &_local_scan.h_& gives you access to a number of C variables. These
 are the only ones that are guaranteed to be maintained from release to release.
 .cindex "&[local_scan()]& function" "available Exim variables"
 The header &_local_scan.h_& gives you access to a number of C variables. These
 are the only ones that are guaranteed to be maintained from release to release.

-Note, however, that you can obtain the value of any Exim variable by calling
-&'expand_string()'&. The exported variables are as follows:
+Note, however, that you can obtain the value of any Exim expansion variable,
+including &$recipients$&, by calling &'expand_string()'&. The exported
+C variables are as follows:

 
 .vlist
 
 .vlist

+.vitem &*int&~body_linecount*&
+This variable contains the number of lines in the message's body.
+
+.vitem &*int&~body_zerocount*&
+This variable contains the number of binary zero bytes in the message's body.
+

 .vitem &*unsigned&~int&~debug_selector*&
 This variable is set to zero when no debugging is taking place. Otherwise, it
 is a bitmap of debugging selectors. Two bits are identified for use in
 .vitem &*unsigned&~int&~debug_selector*&
 This variable is set to zero when no debugging is taking place. Otherwise, it
 is a bitmap of debugging selectors. Two bits are identified for use in


@@ -27989,11 +28767,9 @@ The IP address of the interface that received the message, as a string. This
 is NULL for locally submitted messages.
 
 .vitem &*int&~interface_port*&
 is NULL for locally submitted messages.
 
 .vitem &*int&~interface_port*&

-.new

 The port on which this message was received. When testing with the &%-bh%&
 command line option, the value of this variable is -1 unless a port has been
 specified via the &%-oMi%& option.
 The port on which this message was received. When testing with the &%-bh%&
 command line option, the value of this variable is -1 unless a port has been
 specified via the &%-oMi%& option.

-.wen

 
 .vitem &*uschar&~*message_id*&
 This variable contains Exim's message id for the incoming message (the value of
 
 .vitem &*uschar&~*message_id*&
 This variable contains Exim's message id for the incoming message (the value of


@@ -28011,8 +28787,8 @@ The number of accepted recipients.
 The list of accepted recipients, held in a vector of length
 &%recipients_count%&. The &%recipient_item%& structure is discussed below. You
 can add additional recipients by calling &'receive_add_recipient()'& (see
 The list of accepted recipients, held in a vector of length
 &%recipients_count%&. The &%recipient_item%& structure is discussed below. You
 can add additional recipients by calling &'receive_add_recipient()'& (see

-below). You can delete recipients by removing them from the vector and adusting
-the value in &%recipients_count%&. In particular, by setting
+below). You can delete recipients by removing them from the vector and
+adjusting the value in &%recipients_count%&. In particular, by setting

 &%recipients_count%& to zero you remove all recipients. If you then return the
 value &`LOCAL_SCAN_ACCEPT`&, the message is accepted, but immediately
 blackholed. To replace the recipients, you can set &%recipients_count%& to zero
 &%recipients_count%& to zero you remove all recipients. If you then return the
 value &`LOCAL_SCAN_ACCEPT`&, the message is accepted, but immediately
 blackholed. To replace the recipients, you can set &%recipients_count%& to zero


@@ -28047,7 +28823,7 @@ requests. See section &<<SECTmemhanloc>>& for details.
 .endlist
 
 
 .endlist
 
 

-.section "Structure of header lines"
+.section "Structure of header lines" "SECID209"

 The &%header_line%& structure contains the members listed below.
 You can add additional header lines by calling the &'header_add()'& function
 (see below). You can cause header lines to be ignored (deleted) by setting
 The &%header_line%& structure contains the members listed below.
 You can add additional header lines by calling the &'header_add()'& function
 (see below). You can cause header lines to be ignored (deleted) by setting


@@ -28077,7 +28853,7 @@ a zero byte. Internal newlines are preserved.
 
 
 
 
 
 

-.section "Structure of recipient items"
+.section "Structure of recipient items" "SECID210"

 The &%recipient_item%& structure contains these members:
 
 .vlist
 The &%recipient_item%& structure contains these members:
 
 .vlist


@@ -28101,7 +28877,7 @@ is NULL for all recipients.
 
 
 
 
 
 

-.section "Available Exim functions"
+.section "Available Exim functions" "SECID211"

 .cindex "&[local_scan()]& function" "available Exim functions"
 The header &_local_scan.h_& gives you access to a number of Exim functions.
 These are the only ones that are guaranteed to be maintained from release to
 .cindex "&[local_scan()]& function" "available Exim functions"
 The header &_local_scan.h_& gives you access to a number of Exim functions.
 These are the only ones that are guaranteed to be maintained from release to


@@ -28291,7 +29067,7 @@ expected to be
 .code
 lss_match_host(sender_host_name, sender_host_address, ...)
 .endd
 .code
 lss_match_host(sender_host_name, sender_host_address, ...)
 .endd

-.cindex "&$sender_host_address$&"
+.vindex "&$sender_host_address$&"

 An empty address field matches an empty item in the host list. If the host name
 is NULL, the name corresponding to &$sender_host_address$& is automatically
 looked up if a host name is required to match an item in the list. The return
 An empty address field matches an empty item in the host list. If the host name
 is NULL, the name corresponding to &$sender_host_address$& is automatically
 looked up if a host name is required to match an item in the list. The return


@@ -28491,8 +29267,8 @@ If you want your filter to do something only once per message, you can make use
 of the &%first_delivery%& condition in an &%if%& command in the filter to
 prevent it happening on retries.
 
 of the &%first_delivery%& condition in an &%if%& command in the filter to
 prevent it happening on retries.
 

-.cindex "&$domain$&"
-.cindex "&$local_part$&"
+.vindex "&$domain$&"
+.vindex "&$local_part$&"

 &*Warning*&: Because the system filter runs just once, variables that are
 specific to individual recipient addresses, such as &$local_part$& and
 &$domain$&, are not set, and the &"personal"& condition is not meaningful. If
 &*Warning*&: Because the system filter runs just once, variables that are
 specific to individual recipient addresses, such as &$local_part$& and
 &$domain$&, are not set, and the &"personal"& condition is not meaningful. If


@@ -28501,7 +29277,7 @@ independently, you can do so by setting up a suitable &(redirect)& router, as
 described in section &<<SECTperaddfil>>& below.
 
 
 described in section &<<SECTperaddfil>>& below.
 
 

-.section "Specifying a system filter"
+.section "Specifying a system filter" "SECID212"

 .cindex "uid (user id)" "system filter"
 .cindex "gid (group id)" "system filter"
 The name of the file that contains the system filter must be specified by
 .cindex "uid (user id)" "system filter"
 .cindex "gid (group id)" "system filter"
 The name of the file that contains the system filter must be specified by


@@ -28520,7 +29296,7 @@ specified by setting &%system_filter_file_transport%& and
 by the &%reply%& command.
 
 
 by the &%reply%& command.
 
 

-.section "Testing a system filter"
+.section "Testing a system filter" "SECID213"

 You can run simple tests of a system filter in the same way as for a user
 filter, but you should use &%-bF%& rather than &%-bf%&, so that features that
 are permitted only in system filters are recognized.
 You can run simple tests of a system filter in the same way as for a user
 filter, but you should use &%-bF%& rather than &%-bf%&, so that features that
 are permitted only in system filters are recognized.


@@ -28530,7 +29306,7 @@ you can use both &%-bF%& and &%-bf%& on the same command line.
 
 
 
 
 
 

-.section "Contents of a system filter"
+.section "Contents of a system filter" "SECID214"

 The language used to specify system filters is the same as for users' filter
 files. It is described in the separate end-user document &'Exim's interface to
 mail filtering'&. However, there are some additional features that are
 The language used to specify system filters is the same as for users' filter
 files. It is described in the separate end-user document &'Exim's interface to
 mail filtering'&. However, there are some additional features that are


@@ -28559,15 +29335,15 @@ to which users' filter files can refer.
 
 
 
 
 
 

-.section "Additional variable for system filters"
-.cindex "&$recipients$&"
+.section "Additional variable for system filters" "SECID215"
+.vindex "&$recipients$&"

 The expansion variable &$recipients$&, containing a list of all the recipients
 of the message (separated by commas and white space), is available in system
 filters. It is not available in users' filters for privacy reasons.
 
 
 
 The expansion variable &$recipients$&, containing a list of all the recipients
 of the message (separated by commas and white space), is available in system
 filters. It is not available in users' filters for privacy reasons.
 
 
 

-.section "Defer, freeze, and fail commands for system filters"
+.section "Defer, freeze, and fail commands for system filters" "SECID216"

 .cindex "freezing messages"
 .cindex "message" "freezing"
 .cindex "message" "forced failure"
 .cindex "freezing messages"
 .cindex "message" "freezing"
 .cindex "message" "forced failure"


@@ -28710,7 +29486,7 @@ headers remove "Old-Subject"
 
 
 
 
 
 

-.section "Setting an errors address in a system filter"
+.section "Setting an errors address in a system filter" "SECID217"

 .cindex "envelope sender"
 In a system filter, if a &%deliver%& command is followed by
 .code
 .cindex "envelope sender"
 In a system filter, if a &%deliver%& command is followed by
 .code


@@ -28729,8 +29505,8 @@ address if its delivery failed.
 
 
 .section "Per-address filtering" "SECTperaddfil"
 
 
 .section "Per-address filtering" "SECTperaddfil"

-.cindex "&$domain$&"
-.cindex "&$local_part$&"
+.vindex "&$domain$&"
+.vindex "&$local_part$&"

 In contrast to the system filter, which is run just once per message for each
 delivery attempt, it is also possible to set up a system-wide filtering
 operation that runs once for each recipient address. In this case, variables
 In contrast to the system filter, which is run just once per message for each
 delivery attempt, it is also possible to set up a system-wide filtering
 operation that runs once for each recipient address. In this case, variables


@@ -28800,7 +29576,7 @@ that there are appropriate entries in your ACLs.
 Processing that happens automatically for locally-originated messages (unless
 &%suppress_local_fixups%& is set) can also be requested for messages that are
 received over TCP/IP. The term &"submission mode"& is used to describe this
 Processing that happens automatically for locally-originated messages (unless
 &%suppress_local_fixups%& is set) can also be requested for messages that are
 received over TCP/IP. The term &"submission mode"& is used to describe this

-state. Submisssion mode is set by the modifier
+state. Submission mode is set by the modifier

 .code
 control = submission
 .endd
 .code
 control = submission
 .endd


@@ -28814,7 +29590,7 @@ interface, you could include the following in the MAIL ACL:
 warn  hosts = 127.0.0.1
       control = submission
 .endd
 warn  hosts = 127.0.0.1
       control = submission
 .endd

-.cindex "&%sender_retain%&"
+.cindex "&%sender_retain%& submission option"

 There are some options that can be used when setting submission mode. A slash
 is used to separate options. For example:
 .code
 There are some options that can be used when setting submission mode. A slash
 is used to separate options. For example:
 .code


@@ -28911,7 +29687,7 @@ line.
 
 
 
 
 
 

-.section "Unqualified addresses"
+.section "Unqualified addresses" "SECID218"

 .cindex "unqualified addresses"
 .cindex "address" "qualification"
 By default, Exim expects every envelope address it receives from an external
 .cindex "unqualified addresses"
 .cindex "address" "qualification"
 By default, Exim expects every envelope address it receives from an external


@@ -28921,13 +29697,13 @@ messages from MUAs running on personal workstations, there is sometimes a
 requirement to accept unqualified addresses from specific hosts or IP networks.
 
 Exim has two options that separately control which hosts may send unqualified
 requirement to accept unqualified addresses from specific hosts or IP networks.
 
 Exim has two options that separately control which hosts may send unqualified

-sender or receipient addresses in SMTP commands, namely
+sender or recipient addresses in SMTP commands, namely

 &%sender_unqualified_hosts%& and &%recipient_unqualified_hosts%&. In both
 cases, if an unqualified address is accepted, it is qualified by adding the
 value of &%qualify_domain%& or &%qualify_recipient%&, as appropriate.
 
 &%sender_unqualified_hosts%& and &%recipient_unqualified_hosts%&. In both
 cases, if an unqualified address is accepted, it is qualified by adding the
 value of &%qualify_domain%& or &%qualify_recipient%&, as appropriate.
 

-.cindex "&%qualify_domain%&"
-.cindex "&%qualify_recipient%&"
+.oindex "&%qualify_domain%&"
+.oindex "&%qualify_recipient%&"

 Unqualified addresses in header lines are automatically qualified for messages
 that are locally originated, unless the &%-bnq%& option is given on the command
 line. For messages received over SMTP, unqualified addresses in header lines
 Unqualified addresses in header lines are automatically qualified for messages
 that are locally originated, unless the &%-bnq%& option is given on the command
 line. For messages received over SMTP, unqualified addresses in header lines


@@ -28938,12 +29714,12 @@ other words, such qualification is also controlled by
 
 
 
 
 
 

-.section "The UUCP From line"
+.section "The UUCP From line" "SECID219"

 .cindex "&""From""& line"
 .cindex "UUCP" "&""From""& line"
 .cindex "sender" "address"
 .cindex "&""From""& line"
 .cindex "UUCP" "&""From""& line"
 .cindex "sender" "address"

-.cindex "&%uucp_from_pattern%&"
-.cindex "&%uucp_from_sender%&"
+.oindex "&%uucp_from_pattern%&"
+.oindex "&%uucp_from_sender%&"

 .cindex "envelope sender"
 .cindex "Sendmail compatibility" "&""From""& line"
 Messages that have come from UUCP (and some other applications) often begin
 .cindex "envelope sender"
 .cindex "Sendmail compatibility" "&""From""& line"
 Messages that have come from UUCP (and some other applications) often begin


@@ -28982,7 +29758,7 @@ incoming SMTP message from a source that is not permitted to send them.
 
 
 
 
 
 

-.section "Resent- header lines"
+.section "Resent- header lines" "SECID220"

 .cindex "&%Resent-%& header lines"
 RFC 2822 makes provision for sets of header lines starting with the string
 &`Resent-`& to be added to a message when it is resent by the original
 .cindex "&%Resent-%& header lines"
 RFC 2822 makes provision for sets of header lines starting with the string
 &`Resent-`& to be added to a message when it is resent by the original


@@ -29023,14 +29799,14 @@ The logic for adding &'Sender:'& is duplicated for &'Resent-Sender:'& when any
 
 
 
 
 
 

-.section "The Auto-Submitted: header line"
+.section "The Auto-Submitted: header line" "SECID221"

 Whenever Exim generates an autoreply, a bounce, or a delay warning message, it
 includes the header line:
 .code
 Auto-Submitted: auto-replied
 .endd
 
 Whenever Exim generates an autoreply, a bounce, or a delay warning message, it
 includes the header line:
 .code
 Auto-Submitted: auto-replied
 .endd
 

-.section "The Bcc: header line"
+.section "The Bcc: header line" "SECID222"

 .cindex "&'Bcc:'& header line"
 If Exim is called with the &%-t%& option, to take recipient addresses from a
 message's header, it removes any &'Bcc:'& header line that may exist (after
 .cindex "&'Bcc:'& header line"
 If Exim is called with the &%-t%& option, to take recipient addresses from a
 message's header, it removes any &'Bcc:'& header line that may exist (after


@@ -29038,15 +29814,15 @@ extracting its addresses). If &%-t%& is not present on the command line, any
 existing &'Bcc:'& is not removed.
 
 
 existing &'Bcc:'& is not removed.
 
 

-.section "The Date: header line"
+.section "The Date: header line" "SECID223"

 .cindex "&'Date:'& header line"
 If a locally-generated or submission-mode message has no &'Date:'& header line,
 Exim adds one, using the current date and time, unless the
 &%suppress_local_fixups%& control has been specified.
 
 .cindex "&'Date:'& header line"
 If a locally-generated or submission-mode message has no &'Date:'& header line,
 Exim adds one, using the current date and time, unless the
 &%suppress_local_fixups%& control has been specified.
 

-.section "The Delivery-date: header line"
+.section "The Delivery-date: header line" "SECID224"

 .cindex "&'Delivery-date:'& header line"
 .cindex "&'Delivery-date:'& header line"

-.cindex "&%delivery_date_remove%&"
+.oindex "&%delivery_date_remove%&"

 &'Delivery-date:'& header lines are not part of the standard RFC 2822 header
 set. Exim can be configured to add them to the final delivery of messages. (See
 the generic &%delivery_date_add%& transport option.) They should not be present
 &'Delivery-date:'& header lines are not part of the standard RFC 2822 header
 set. Exim can be configured to add them to the final delivery of messages. (See
 the generic &%delivery_date_add%& transport option.) They should not be present


@@ -29055,9 +29831,9 @@ set (the default), Exim removes &'Delivery-date:'& header lines from incoming
 messages.
 
 
 messages.
 
 

-.section "The Envelope-to: header line"
+.section "The Envelope-to: header line" "SECID225"

 .cindex "&'Envelope-to:'& header line"
 .cindex "&'Envelope-to:'& header line"

-.cindex "&%envelope_to_remove%&"
+.oindex "&%envelope_to_remove%&"

 &'Envelope-to:'& header lines are not part of the standard RFC 2822 header set.
 Exim can be configured to add them to the final delivery of messages. (See the
 generic &%envelope_to_add%& transport option.) They should not be present in
 &'Envelope-to:'& header lines are not part of the standard RFC 2822 header set.
 Exim can be configured to add them to the final delivery of messages. (See the
 generic &%envelope_to_add%& transport option.) They should not be present in


@@ -29078,10 +29854,10 @@ adds one if either of the following conditions is true:
 The envelope sender address is not empty (that is, this is not a bounce
 message). The added header line copies the envelope sender address.
 .next
 The envelope sender address is not empty (that is, this is not a bounce
 message). The added header line copies the envelope sender address.
 .next

-.cindex "&$authenticated_id$&"
+.vindex "&$authenticated_id$&"

 The SMTP session is authenticated and &$authenticated_id$& is not empty.
 .olist
 The SMTP session is authenticated and &$authenticated_id$& is not empty.
 .olist

-.cindex "&$qualify_domain$&"
+.vindex "&$qualify_domain$&"

 If no domain is specified by the submission control, the local part is
 &$authenticated_id$& and the domain is &$qualify_domain$&.
 .next
 If no domain is specified by the submission control, the local part is
 &$authenticated_id$& and the domain is &$qualify_domain$&.
 .next


@@ -29109,10 +29885,10 @@ user, this is replaced by an address containing the user's login name and full
 name as described in section &<<SECTconstr>>&.
 
 
 name as described in section &<<SECTconstr>>&.
 
 

-.section "The Message-ID: header line"
+.section "The Message-ID: header line" "SECID226"

 .cindex "&'Message-ID:'& header line"
 .cindex "message" "submission"
 .cindex "&'Message-ID:'& header line"
 .cindex "message" "submission"

-.cindex "&%message_id_header_text%&"
+.oindex "&%message_id_header_text%&"

 If a locally-generated or submission-mode incoming message does not contain a
 &'Message-ID:'& or &'Resent-Message-ID:'& header line, and the
 &%suppress_local_fixups%& control is not set, Exim adds a suitable header line
 If a locally-generated or submission-mode incoming message does not contain a
 &'Message-ID:'& or &'Resent-Message-ID:'& header line, and the
 &%suppress_local_fixups%& control is not set, Exim adds a suitable header line


@@ -29124,7 +29900,7 @@ in this header line by setting the &%message_id_header_text%& and/or
 &%message_id_header_domain%& options.
 
 
 &%message_id_header_domain%& options.
 
 

-.section "The Received: header line"
+.section "The Received: header line" "SECID227"

 .cindex "&'Received:'& header line"
 A &'Received:'& header line is added at the start of every message. The
 contents are defined by the &%received_header_text%& configuration option, and
 .cindex "&'Received:'& header line"
 A &'Received:'& header line is added at the start of every message. The
 contents are defined by the &%received_header_text%& configuration option, and


@@ -29140,7 +29916,7 @@ changed to the time of acceptance, which is (apart from a small delay while the
 -H spool file is written) the earliest time at which delivery could start.
 
 
 -H spool file is written) the earliest time at which delivery could start.
 
 

-.section "The References: header line"
+.section "The References: header line" "SECID228"

 .cindex "&'References:'& header line"
 Messages created by the &(autoreply)& transport include a &'References:'&
 header line. This is constructed according to the rules that are described in
 .cindex "&'References:'& header line"
 Messages created by the &(autoreply)& transport include a &'References:'&
 header line. This is constructed according to the rules that are described in


@@ -29154,9 +29930,9 @@ incoming message. If there are more than 12, the first one and then the final
 
 
 
 
 
 

-.section "The Return-path: header line"
+.section "The Return-path: header line" "SECID229"

 .cindex "&'Return-path:'& header line"
 .cindex "&'Return-path:'& header line"

-.cindex "&%return_path_remove%&"
+.oindex "&%return_path_remove%&"

 &'Return-path:'& header lines are defined as something an MTA may insert when
 it does the final delivery of messages. (See the generic &%return_path_add%&
 transport option.) Therefore, they should not be present in messages in
 &'Return-path:'& header lines are defined as something an MTA may insert when
 it does the final delivery of messages. (See the generic &%return_path_add%&
 transport option.) Therefore, they should not be present in messages in


@@ -29195,13 +29971,13 @@ received over TCP/IP or for messages submitted by trusted users. However, when
 a message is received over TCP/IP in submission mode, and &%sender_retain%& is
 not specified on the submission control, the following processing takes place:
 
 a message is received over TCP/IP in submission mode, and &%sender_retain%& is
 not specified on the submission control, the following processing takes place:
 

-.cindex "&$authenticated_id$&"
+.vindex "&$authenticated_id$&"

 First, any existing &'Sender:'& lines are removed. Then, if the SMTP session is
 authenticated, and &$authenticated_id$& is not empty, a sender address is
 created as follows:
 
 .ilist
 First, any existing &'Sender:'& lines are removed. Then, if the SMTP session is
 authenticated, and &$authenticated_id$& is not empty, a sender address is
 created as follows:
 
 .ilist

-.cindex "&$qualify_domain$&"
+.vindex "&$qualify_domain$&"

 If no domain is specified by the submission control, the local part is
 &$authenticated_id$& and the domain is &$qualify_domain$&.
 .next
 If no domain is specified by the submission control, the local part is
 &$authenticated_id$& and the domain is &$qualify_domain$&.
 .next


@@ -29267,7 +30043,7 @@ accepted by that router, and also with any new addresses that it generates. If
 an address passes through several routers as a result of aliasing or
 forwarding, the changes are cumulative.
 
 an address passes through several routers as a result of aliasing or
 forwarding, the changes are cumulative.
 

-.cindex "&%unseen%& option"
+.oindex "&%unseen%&"

 However, this does not apply to multiple routers that result from the use of
 the &%unseen%& option. Any header modifications that were specified by the
 &"unseen"& router or its predecessors apply only to the &"unseen"& delivery.
 However, this does not apply to multiple routers that result from the use of
 the &%unseen%& option. Any header modifications that were specified by the
 &"unseen"& router or its predecessors apply only to the &"unseen"& delivery.


@@ -29356,7 +30132,7 @@ is, with codes greater than 127) count as printing characters or not.
 
 
 
 
 
 

-.section "Case of local parts"
+.section "Case of local parts" "SECID230"

 .cindex "case of local parts"
 .cindex "local part" "case of"
 RFC 2822 states that the case of letters in the local parts of addresses cannot
 .cindex "case of local parts"
 .cindex "local part" "case of"
 RFC 2822 states that the case of letters in the local parts of addresses cannot


@@ -29388,7 +30164,7 @@ local parts with the correct case in a case-sensitive manner.
 
 
 
 
 
 

-.section "Dots in local parts"
+.section "Dots in local parts" "SECID231"

 .cindex "dot" "in local part"
 .cindex "local part" "dots in"
 RFC 2822 forbids empty components in local parts. That is, an unquoted local
 .cindex "dot" "in local part"
 .cindex "local part" "dots in"
 RFC 2822 forbids empty components in local parts. That is, an unquoted local


@@ -29398,7 +30174,7 @@ empty components for compatibility.
 
 
 
 
 
 

-.section "Rewriting addresses"
+.section "Rewriting addresses" "SECID232"

 .cindex "rewriting" "addresses"
 Rewriting of sender and recipient addresses, and addresses in headers, can
 happen automatically, or as the result of configuration options, as described
 .cindex "rewriting" "addresses"
 Rewriting of sender and recipient addresses, and addresses in headers, can
 happen automatically, or as the result of configuration options, as described


@@ -29694,7 +30470,7 @@ host error, in order not to delay other messages to the same host.
 
 
 
 
 
 

-.section "Incoming SMTP messages over TCP/IP"
+.section "Incoming SMTP messages over TCP/IP" "SECID233"

 .cindex "SMTP" "incoming over TCP/IP"
 .cindex "incoming SMTP over TCP/IP"
 .cindex "inetd"
 .cindex "SMTP" "incoming over TCP/IP"
 .cindex "incoming SMTP over TCP/IP"
 .cindex "inetd"


@@ -29796,7 +30572,7 @@ MAIL and RCPT commands in a single SMTP session. See the
 
 
 
 
 
 

-.section "Unrecognized SMTP commands"
+.section "Unrecognized SMTP commands" "SECID234"

 .cindex "SMTP" "unrecognized commands"
 If Exim receives more than &%smtp_max_unknown_commands%& unrecognized SMTP
 commands during a single SMTP connection, it drops the connection after sending
 .cindex "SMTP" "unrecognized commands"
 If Exim receives more than &%smtp_max_unknown_commands%& unrecognized SMTP
 commands during a single SMTP connection, it drops the connection after sending


@@ -29806,7 +30582,7 @@ abuse that subvert web servers into making connections to SMTP ports; in these
 circumstances, a number of non-SMTP lines are sent first.
 
 
 circumstances, a number of non-SMTP lines are sent first.
 
 

-.section "Syntax and protocol errors in SMTP commands"
+.section "Syntax and protocol errors in SMTP commands" "SECID235"

 .cindex "SMTP" "syntax errors"
 .cindex "SMTP" "protocol errors"
 A syntax error is detected if an SMTP command is recognized, but there is
 .cindex "SMTP" "syntax errors"
 .cindex "SMTP" "protocol errors"
 A syntax error is detected if an SMTP command is recognized, but there is


@@ -29820,7 +30596,7 @@ broken clients that loop sending bad commands (yes, it has been seen).
 
 
 
 
 
 

-.section "Use of non-mail SMTP commands"
+.section "Use of non-mail SMTP commands" "SECID236"

 .cindex "SMTP" "non-mail commands"
 The &"non-mail"& SMTP commands are those other than MAIL, RCPT, and
 DATA. Exim counts such commands, and drops the connection if there are too
 .cindex "SMTP" "non-mail commands"
 The &"non-mail"& SMTP commands are those other than MAIL, RCPT, and
 DATA. Exim counts such commands, and drops the connection if there are too


@@ -29831,7 +30607,7 @@ defines what &"too many"& means. Its default value is 10.
 
 When a new message is expected, one occurrence of RSET is not counted. This
 allows a client to send one RSET between messages (this is not necessary,
 
 When a new message is expected, one occurrence of RSET is not counted. This
 allows a client to send one RSET between messages (this is not necessary,

-but some clients do it). Exim also allows one uncounted occurence of HELO
+but some clients do it). Exim also allows one uncounted occurrence of HELO

 or EHLO, and one occurrence of STARTTLS between messages. After
 starting up a TLS session, another EHLO is expected, and so it too is not
 counted.
 or EHLO, and one occurrence of STARTTLS between messages. After
 starting up a TLS session, another EHLO is expected, and so it too is not
 counted.


@@ -29849,7 +30625,7 @@ specific badly-behaved hosts that you have to live with.
 
 
 
 
 
 

-.section "The VRFY and EXPN commands"
+.section "The VRFY and EXPN commands" "SECID237"

 When Exim receives a VRFY or EXPN command on a TCP/IP connection, it
 runs the ACL specified by &%acl_smtp_vrfy%& or &%acl_smtp_expn%& (as
 appropriate) in order to decide whether the command should be accepted or not.
 When Exim receives a VRFY or EXPN command on a TCP/IP connection, it
 runs the ACL specified by &%acl_smtp_vrfy%& or &%acl_smtp_expn%& (as
 appropriate) in order to decide whether the command should be accepted or not.


@@ -29907,7 +30683,7 @@ a &"success"& return code. Obviously there is scope for hints records to get
 left lying around if there is a system or program crash. To guard against this,
 Exim ignores any records that are more than six hours old.
 
 left lying around if there is a system or program crash. To guard against this,
 Exim ignores any records that are more than six hours old.
 

-.cindex "&%smtp_etrn_command%&"
+.oindex "&%smtp_etrn_command%&"

 For more control over what ETRN does, the &%smtp_etrn_command%& option can
 used. This specifies a command that is run whenever ETRN is received,
 whatever the form of its argument. For
 For more control over what ETRN does, the &%smtp_etrn_command%& option can
 used. This specifies a command that is run whenever ETRN is received,
 whatever the form of its argument. For


@@ -29916,7 +30692,7 @@ example:
 smtp_etrn_command = /etc/etrn_command $domain \
                     $sender_host_address
 .endd
 smtp_etrn_command = /etc/etrn_command $domain \
                     $sender_host_address
 .endd

-.cindex "&$domain$&"
+.vindex "&$domain$&"

 The string is split up into arguments which are independently expanded. The
 expansion variable &$domain$& is set to the argument of the ETRN command,
 and no syntax checking is done on the contents of this argument. Exim does not
 The string is split up into arguments which are independently expanded. The
 expansion variable &$domain$& is set to the argument of the ETRN command,
 and no syntax checking is done on the contents of this argument. Exim does not


@@ -29926,7 +30702,7 @@ for it to change them before running the command.
 
 
 
 
 
 

-.section "Incoming local SMTP"
+.section "Incoming local SMTP" "SECID238"

 .cindex "SMTP" "local incoming"
 Some user agents use SMTP to pass messages to their local MTA using the
 standard input and output, as opposed to passing the envelope on the command
 .cindex "SMTP" "local incoming"
 Some user agents use SMTP to pass messages to their local MTA using the
 standard input and output, as opposed to passing the envelope on the command


@@ -29965,7 +30741,7 @@ to handle several addresses at once by setting the &%batch_max%& option. When
 this is done for BSMTP, messages may contain multiple RCPT commands. See
 chapter &<<CHAPbatching>>& for more details.
 
 this is done for BSMTP, messages may contain multiple RCPT commands. See
 chapter &<<CHAPbatching>>& for more details.
 

-.cindex "&$host$&"
+.vindex "&$host$&"

 When one or more addresses are routed to a BSMTP transport by a router that
 sets up a host list, the name of the first host on the list is available to the
 transport in the variable &$host$&. Here is an example of such a transport and
 When one or more addresses are routed to a BSMTP transport by a router that
 sets up a host list, the name of the first host on the list is available to the
 transport in the variable &$host$&. Here is an example of such a transport and


@@ -30059,7 +30835,7 @@ Auto-Submitted: auto-generated
 to all warning and bounce messages,
 
 
 to all warning and bounce messages,
 
 

-.section "Customizing bounce messages"
+.section "Customizing bounce messages" "SECID239"

 .cindex "customizing" "bounce message"
 .cindex "bounce message" "customizing"
 If &%bounce_message_text%& is set, its contents are included in the default
 .cindex "customizing" "bounce message"
 .cindex "bounce message" "customizing"
 If &%bounce_message_text%& is set, its contents are included in the default


@@ -30074,8 +30850,8 @@ opened, default text is used and a message is written to the main and panic
 logs. If any text item in the file is empty, default text is used for that
 item.
 
 logs. If any text item in the file is empty, default text is used for that
 item.
 

-.cindex "&$bounce_recipient$&"
-.cindex "&$bounce_return_size_limit$&"
+.vindex "&$bounce_recipient$&"
+.vindex "&$bounce_return_size_limit$&"

 Each item of text that is read from the file is expanded, and there are two
 expansion variables which can be of use here: &$bounce_recipient$& is set to
 the recipient of an error message while it is being created, and
 Each item of text that is read from the file is expanded, and there are two
 expansion variables which can be of use here: &$bounce_recipient$& is set to
 the recipient of an error message while it is being created, and


@@ -30176,8 +30952,8 @@ intervals if the message remains undelivered. Eventually the
 mail delivery software will give up, and when that happens,
 the message will be returned to you.
 .endd
 mail delivery software will give up, and when that happens,
 the message will be returned to you.
 .endd

-.cindex "&$warn_message_delay$&"
-.cindex "&$warn_message_recipients$&"
+.vindex "&$warn_message_delay$&"
+.vindex "&$warn_message_recipients$&"

 However, in the default state the subject and date lines are omitted if no
 appropriate headers exist. During the expansion of this file,
 &$warn_message_delay$& is set to the delay time in one of the forms &"<&'n'&>
 However, in the default state the subject and date lines are omitted if no
 appropriate headers exist. During the expansion of this file,
 &$warn_message_delay$& is set to the delay time in one of the forms &"<&'n'&>


@@ -30198,7 +30974,7 @@ common. More examples and discussion can be found in the Exim book.
 
 
 
 
 
 

-.section "Sending mail to a smart host"
+.section "Sending mail to a smart host" "SECID240"

 .cindex "smart host" "example router"
 If you want to send all mail for non-local domains to a &"smart host"&, you
 should replace the default &(dnslookup)& router with a router which does the
 .cindex "smart host" "example router"
 If you want to send all mail for non-local domains to a &"smart host"&, you
 should replace the default &(dnslookup)& router with a router which does the


@@ -30247,7 +31023,7 @@ The &%forbid_pipe%& and &%forbid_file%& options prevent a local part from being
 expanded into a file name or a pipe delivery, which is usually inappropriate in
 a mailing list.
 
 expanded into a file name or a pipe delivery, which is usually inappropriate in
 a mailing list.
 

-.cindex "&%errors_to%&"
+.oindex "&%errors_to%&"

 The &%errors_to%& option specifies that any delivery errors caused by addresses
 taken from a mailing list are to be sent to the given address rather than the
 original sender of the message. However, before acting on this, Exim verifies
 The &%errors_to%& option specifies that any delivery errors caused by addresses
 taken from a mailing list are to be sent to the given address rather than the
 original sender of the message. However, before acting on this, Exim verifies


@@ -30265,7 +31041,7 @@ or &%local_part_suffix%& options) to handle addresses of the form
 
 
 
 
 
 

-.section "Syntax errors in mailing lists"
+.section "Syntax errors in mailing lists" "SECID241"

 .cindex "mailing lists" "syntax errors in"
 If an entry in redirection data contains a syntax error, Exim normally defers
 delivery of the original address. That means that a syntax error in a mailing
 .cindex "mailing lists" "syntax errors in"
 If an entry in redirection data contains a syntax error, Exim normally defers
 delivery of the original address. That means that a syntax error in a mailing


@@ -30281,7 +31057,7 @@ whenever a broken address is skipped. It is usually appropriate to set
 
 
 
 
 
 

-.section "Re-expansion of mailing lists"
+.section "Re-expansion of mailing lists" "SECID242"

 .cindex "mailing lists" "re-expansion of"
 Exim remembers every individual address to which a message has been delivered,
 in order to avoid duplication, but it normally stores only the original
 .cindex "mailing lists" "re-expansion of"
 Exim remembers every individual address to which a message has been delivered,
 in order to avoid duplication, but it normally stores only the original


@@ -30309,7 +31085,7 @@ one level of expansion anyway.
 
 
 
 
 
 

-.section "Closed mailing lists"
+.section "Closed mailing lists" "SECID243"

 .cindex "mailing lists" "closed"
 The examples so far have assumed open mailing lists, to which anybody may
 send mail. It is also possible to set up closed lists, where mail is accepted
 .cindex "mailing lists" "closed"
 The examples so far have assumed open mailing lists, to which anybody may
 send mail. It is also possible to set up closed lists, where mail is accepted


@@ -30404,7 +31180,7 @@ rewritten as
 .code
 somelist-request+subscriber=other.dom.example@your.dom.example
 .endd
 .code
 somelist-request+subscriber=other.dom.example@your.dom.example
 .endd

-.cindex "&$local_part$&"
+.vindex "&$local_part$&"

 For this to work, you must tell Exim to send multiple copies of messages that
 have more than one recipient, so that each copy has just one recipient. This is
 achieved by setting &%max_rcpt%& to 1. Without this, a single copy of a message
 For this to work, you must tell Exim to send multiple copies of messages that
 have more than one recipient, so that each copy has just one recipient. This is
 achieved by setting &%max_rcpt%& to 1. Without this, a single copy of a message


@@ -30558,7 +31334,7 @@ userforward:
   local_part_suffix_optional
   allow_filter
 .endd
   local_part_suffix_optional
   allow_filter
 .endd

-.cindex "&$local_part_suffix$&"
+.vindex "&$local_part_suffix$&"

 It runs a user's &_.forward_& file for all local parts of the form
 &'username-*'&. Within the filter file the user can distinguish different
 cases by testing the variable &$local_part_suffix$&. For example:
 It runs a user's &_.forward_& file for all local parts of the form
 &'username-*'&. Within the filter file the user can distinguish different
 cases by testing the variable &$local_part_suffix$&. For example:


@@ -30592,7 +31368,7 @@ subsequent routers, which could, if required, look for an unqualified
 
 
 
 
 
 

-.section "Simplified vacation processing"
+.section "Simplified vacation processing" "SECID244"

 .cindex "vacation processing"
 The traditional way of running the &'vacation'& program is for a user to set up
 a pipe command in a &_.forward_& file
 .cindex "vacation processing"
 The traditional way of running the &'vacation'& program is for a user to set up
 a pipe command in a &_.forward_& file


@@ -30622,7 +31398,7 @@ use of arbitrary pipes by users is locked out.
 
 
 
 
 
 

-.section "Taking copies of mail"
+.section "Taking copies of mail" "SECID245"

 .cindex "message" "copying every"
 Some installations have policies that require archive copies of all messages to
 be made. A single copy of each message can easily be taken by an appropriate
 .cindex "message" "copying every"
 Some installations have policies that require archive copies of all messages to
 be made. A single copy of each message can easily be taken by an appropriate


@@ -30636,7 +31412,7 @@ notification of delivery by sites that insist on doing such things.
 
 
 
 
 
 

-.section "Intermittently connected hosts"
+.section "Intermittently connected hosts" "SECID246"

 .cindex "intermittently connected hosts"
 It has become quite common (because it is cheaper) for hosts to connect to the
 Internet periodically rather than remain connected all the time. The normal
 .cindex "intermittently connected hosts"
 It has become quite common (because it is cheaper) for hosts to connect to the
 Internet periodically rather than remain connected all the time. The normal


@@ -30648,7 +31424,7 @@ particularly well-suited to use in an intermittently connected environment.
 Nevertheless there are some features that can be used.
 
 
 Nevertheless there are some features that can be used.
 
 

-.section "Exim on the upstream server host"
+.section "Exim on the upstream server host" "SECID247"

 It is tempting to arrange for incoming mail for the intermittently connected
 host to remain on Exim's queue until the client connects. However, this
 approach does not scale very well. Two different kinds of waiting message are
 It is tempting to arrange for incoming mail for the intermittently connected
 host to remain on Exim's queue until the client connects. However, this
 approach does not scale very well. Two different kinds of waiting message are


@@ -30689,7 +31465,7 @@ arrange a separate transport for the intermittently connected ones.
 
 
 
 
 
 

-.section "Exim on the intermittently connected client host"
+.section "Exim on the intermittently connected client host" "SECID248"

 The value of &%smtp_accept_queue_per_connection%& should probably be
 increased, or even set to zero (that is, disabled) on the intermittently
 connected host, so that all incoming messages down a single connection get
 The value of &%smtp_accept_queue_per_connection%& should probably be
 increased, or even set to zero (that is, disabled) on the intermittently
 connected host, so that all incoming messages down a single connection get


@@ -30716,8 +31492,8 @@ single SMTP connection.
 
 .chapter "Using Exim as a non-queueing client" "CHAPnonqueueing" &&&
          "Exim as a non-queueing client"
 
 .chapter "Using Exim as a non-queueing client" "CHAPnonqueueing" &&&
          "Exim as a non-queueing client"

-.cindex "client" "non-queueing"
-.cindex "smart host" "queueing; suppressing"
+.cindex "client, non-queueing"
+.cindex "smart host" "suppressing queueing"

 On a personal computer, it is a common requirement for all
 email to be sent to a &"smart host"&. There are plenty of MUAs that can be
 configured to operate that way, for all the popular operating systems.
 On a personal computer, it is a common requirement for all
 email to be sent to a &"smart host"&. There are plenty of MUAs that can be
 configured to operate that way, for all the popular operating systems.


@@ -30749,7 +31525,7 @@ Exim already had the necessary infrastructure for doing this job. Just a few
 tweaks were needed to make it behave as required, though it is somewhat of an
 overkill to use a fully-featured MTA for this purpose.
 
 tweaks were needed to make it behave as required, though it is somewhat of an
 overkill to use a fully-featured MTA for this purpose.
 

-.cindex "&%mua_wrapper%&"
+.oindex "&%mua_wrapper%&"

 There is a Boolean global option called &%mua_wrapper%&, defaulting false.
 Setting &%mua_wrapper%& true causes Exim to run in a special mode where it
 assumes that it is being used to &"wrap"& a command-line MUA in the manner
 There is a Boolean global option called &%mua_wrapper%&, defaulting false.
 Setting &%mua_wrapper%& true causes Exim to run in a special mode where it
 assumes that it is being used to &"wrap"& a command-line MUA in the manner


@@ -30764,7 +31540,7 @@ following ways:
 A daemon cannot be run, nor will Exim accept incoming messages from &'inetd'&.
 In other words, the only way to submit messages is via the command line.
 .next
 A daemon cannot be run, nor will Exim accept incoming messages from &'inetd'&.
 In other words, the only way to submit messages is via the command line.
 .next

-Each message is synchonously delivered as soon as it is received (&%-odi%& is
+Each message is synchronously delivered as soon as it is received (&%-odi%& is

 assumed). All queueing options (&%queue_only%&, &%queue_smtp_domains%&,
 &%control%& in an ACL, etc.) are quietly ignored. The Exim reception process
 does not finish until the delivery attempt is complete. If the delivery is
 assumed). All queueing options (&%queue_only%&, &%queue_smtp_domains%&,
 &%control%& in an ACL, etc.) are quietly ignored. The Exim reception process
 does not finish until the delivery attempt is complete. If the delivery is


@@ -30799,7 +31575,7 @@ are ever generated.
 No retry data is maintained, and any retry rules are ignored.
 .next
 A number of Exim options are overridden: &%deliver_drop_privilege%& is forced
 No retry data is maintained, and any retry rules are ignored.
 .next
 A number of Exim options are overridden: &%deliver_drop_privilege%& is forced

-true, &%max_rcpt%& in the smtp transport is forced to &"unlimited"&,
+true, &%max_rcpt%& in the &(smtp)& transport is forced to &"unlimited"&,

 &%remote_max_parallel%& is forced to one, and fallback hosts are ignored.
 .endlist
 
 &%remote_max_parallel%& is forced to one, and fallback hosts are ignored.
 .endlist
 


@@ -30883,6 +31659,13 @@ example:
 .endd
 .endlist
 
 .endd
 .endlist
 

+.cindex "log" "process ids in"
+.cindex "pid (process id)" "in log lines"
+Exim does not include its process id in log lines by default, but you can
+request that it does so by specifying the &`pid`& log selector (see section
+&<<SECTlogselector>>&). When this is set, the process id is output, in square
+brackets, immediately after the time and date.
+

 
 
 
 
 
 


@@ -30948,12 +31731,12 @@ error is logged.
 
 
 
 
 
 

-.section "Logging to local files that are periodically &""cycled""&"
+.section "Logging to local files that are periodically &""cycled""&" "SECID285"

 .cindex "log" "cycling local files"
 .cindex "cycling logs"
 .cindex "&'exicyclog'&"
 .cindex "log" "local files; writing to"
 .cindex "log" "cycling local files"
 .cindex "cycling logs"
 .cindex "&'exicyclog'&"
 .cindex "log" "local files; writing to"

-Some operating systems provide centralized and standardised methods for cycling
+Some operating systems provide centralized and standardized methods for cycling

 log files. For those that do not, a utility script called &'exicyclog'& is
 provided (see section &<<SECTcyclogfil>>&). This renames and compresses the
 main and reject logs each time it is called. The maximum number of old logs to
 log files. For those that do not, a utility script called &'exicyclog'& is
 provided (see section &<<SECTcyclogfil>>&). This renames and compresses the
 main and reject logs each time it is called. The maximum number of old logs to


@@ -31012,7 +31795,7 @@ removed. Thus, the three examples above would give these panic log names:
 .endd
 
 
 .endd
 
 

-.section "Logging to syslog"
+.section "Logging to syslog" "SECID249"

 .cindex "log" "syslog; writing to"
 The use of syslog does not change what Exim logs or the format of its messages,
 except in one respect. If &%syslog_timestamp%& is set false, the timestamps on
 .cindex "log" "syslog; writing to"
 The use of syslog does not change what Exim logs or the format of its messages,
 except in one respect. If &%syslog_timestamp%& is set false, the timestamps on


@@ -31102,7 +31885,7 @@ where it is.
 
 
 
 
 
 

-.section "Log line flags"
+.section "Log line flags" "SECID250"

 One line is written to the main log for each message received, and for each
 successful, unsuccessful, and delayed delivery. These lines can readily be
 picked out by the distinctive two-character flags that immediately follow the
 One line is written to the main log for each message received, and for each
 successful, unsuccessful, and delayed delivery. These lines can readily be
 picked out by the distinctive two-character flags that immediately follow the


@@ -31117,7 +31900,7 @@ timestamp. The flags are:
 .endd
 
 
 .endd
 
 

-.section "Logging message reception"
+.section "Logging message reception" "SECID251"

 .cindex "log" "reception line"
 The format of the single-line entry in the main log that is written for every
 message received is shown in the basic example below, which is split over
 .cindex "log" "reception line"
 The format of the single-line entry in the main log that is written for every
 message received is shown in the basic example below, which is split over


@@ -31191,7 +31974,7 @@ data when a message is received. See section &<<SECTlogselector>>& below.
 
 
 
 
 
 

-.section "Logging deliveries"
+.section "Logging deliveries" "SECID252"

 .cindex "log" "delivery line"
 The format of the single-line entry in the main log that is written for every
 delivery is shown in one of the examples below, for local and remote
 .cindex "log" "delivery line"
 The format of the single-line entry in the main log that is written for every
 delivery is shown in one of the examples below, for local and remote


@@ -31232,7 +32015,7 @@ The &%log_selector%& option can be used to request the logging of additional
 data when a message is delivered. See section &<<SECTlogselector>>& below.
 
 
 data when a message is delivered. See section &<<SECTlogselector>>& below.
 
 

-.section "Discarded deliveries"
+.section "Discarded deliveries" "SECID253"

 .cindex "discarded messages"
 .cindex "message" "discarded"
 .cindex "delivery" "discarded; logging"
 .cindex "discarded messages"
 .cindex "message" "discarded"
 .cindex "delivery" "discarded; logging"


@@ -31250,7 +32033,7 @@ because it is aliased to &":blackhole:"& the log line is like this:
 .endd
 
 
 .endd
 
 

-.section "Deferred deliveries"
+.section "Deferred deliveries" "SECID254"

 When a delivery is deferred, a line of the following form is logged:
 .code
 2002-12-19 16:20:23 16aiQz-0002Q5-00 == marvin@endrest.example
 When a delivery is deferred, a line of the following form is logged:
 .code
 2002-12-19 16:20:23 16aiQz-0002Q5-00 == marvin@endrest.example


@@ -31269,7 +32052,7 @@ appropriate value in &%log_selector%&.
 
 
 
 
 
 

-.section "Delivery failures"
+.section "Delivery failures" "SECID255"

 .cindex "delivery" "failure; logging"
 If a delivery fails because an address cannot be routed, a line of the
 following form is logged:
 .cindex "delivery" "failure; logging"
 If a delivery fails because an address cannot be routed, a line of the
 following form is logged:


@@ -31293,7 +32076,7 @@ flagged with &`**`&.
 
 
 
 
 
 

-.section "Fake deliveries"
+.section "Fake deliveries" "SECID256"

 .cindex "delivery" "fake; logging"
 If a delivery does not actually take place because the &%-N%& option has been
 used to suppress it, a normal delivery line is written to the log, except that
 .cindex "delivery" "fake; logging"
 If a delivery does not actually take place because the &%-N%& option has been
 used to suppress it, a normal delivery line is written to the log, except that


@@ -31301,7 +32084,7 @@ used to suppress it, a normal delivery line is written to the log, except that
 
 
 
 
 
 

-.section "Completion"
+.section "Completion" "SECID257"

 A line of the form
 .code
 2002-10-31 09:00:11 16ZCW1-0005MB-00 Completed
 A line of the form
 .code
 2002-10-31 09:00:11 16ZCW1-0005MB-00 Completed


@@ -31312,14 +32095,16 @@ at the end of its processing.
 
 
 
 
 
 

-.section "Summary of Fields in Log Lines"
+.section "Summary of Fields in Log Lines" "SECID258"

 .cindex "log" "summary of fields"
 A summary of the field identifiers that are used in log lines is shown in
 the following table:
 .display
 &`A   `&        authenticator name (and optional id)
 &`C   `&        SMTP confirmation on delivery
 .cindex "log" "summary of fields"
 A summary of the field identifiers that are used in log lines is shown in
 the following table:
 .display
 &`A   `&        authenticator name (and optional id)
 &`C   `&        SMTP confirmation on delivery

+&`    `&        command list for &"no mail in SMTP session"&

 &`CV  `&        certificate verification status
 &`CV  `&        certificate verification status

+&`D   `&        duration of &"no mail in SMTP session"&

 &`DN  `&        distinguished name from peer certificate
 &`DT  `&        on &`=>`& lines: time taken for a delivery
 &`F   `&        sender address (on delivery lines)
 &`DN  `&        distinguished name from peer certificate
 &`DT  `&        on &`=>`& lines: time taken for a delivery
 &`F   `&        sender address (on delivery lines)


@@ -31341,7 +32126,7 @@ the following table:
 .endd
 
 
 .endd
 
 

-.section "Other log entries"
+.section "Other log entries" "SECID259"

 Various other types of log entry are written from time to time. Most should be
 self-explanatory. Among the more common are:
 
 Various other types of log entry are written from time to time. Most should be
 self-explanatory. Among the more common are:
 


@@ -31418,6 +32203,7 @@ selection marked by asterisks:
 &`*queue_run                  `&  start and end queue runs
 &` queue_time                 `&  time on queue for one recipient
 &` queue_time_overall         `&  time on queue for whole message
 &`*queue_run                  `&  start and end queue runs
 &` queue_time                 `&  time on queue for one recipient
 &` queue_time_overall         `&  time on queue for whole message

+&` pid                        `&  Exim process id

 &` received_recipients        `&  recipients on <= lines
 &` received_sender            `&  sender on <= lines
 &`*rejected_header            `&  header contents on reject log
 &` received_recipients        `&  recipients on <= lines
 &` received_sender            `&  sender on <= lines
 &`*rejected_header            `&  header contents on reject log


@@ -31430,6 +32216,7 @@ selection marked by asterisks:
 &` smtp_confirmation          `&  SMTP confirmation on => lines
 &` smtp_connection            `&  SMTP connections
 &` smtp_incomplete_transaction`&  incomplete SMTP transactions
 &` smtp_confirmation          `&  SMTP confirmation on => lines
 &` smtp_connection            `&  SMTP connections
 &` smtp_incomplete_transaction`&  incomplete SMTP transactions

+&` smtp_no_mail               `&  session with no MAIL commands

 &` smtp_protocol_error        `&  SMTP protocol errors
 &` smtp_syntax_error          `&  SMTP syntax errors
 &` subject                    `&  contents of &'Subject:'& on <= lines
 &` smtp_protocol_error        `&  SMTP protocol errors
 &` smtp_syntax_error          `&  SMTP syntax errors
 &` subject                    `&  contents of &'Subject:'& on <= lines


@@ -31443,7 +32230,7 @@ selection marked by asterisks:
 More details on each of these items follows:
 
 .ilist
 More details on each of these items follows:
 
 .ilist

-.cindex "&%warn%& statement" "log when skipping"
+.cindex "&%warn%& ACL verb" "log when skipping"

 &%acl_warn_skipped%&: When an ACL &%warn%& statement is skipped because one of
 its conditions cannot be evaluated, a log line to this effect is written if
 this log selector is set.
 &%acl_warn_skipped%&: When an ACL &%warn%& statement is skipped because one of
 its conditions cannot be evaluated, a log line to this effect is written if
 this log selector is set.


@@ -31460,7 +32247,7 @@ delivery lines; with this selector, intermediate parents are given in
 parentheses between them.
 .next
 .cindex "log" "Exim arguments"
 parentheses between them.
 .next
 .cindex "log" "Exim arguments"

-.cindex "Exim arguments" "logging"
+.cindex "Exim arguments, logging"

 &%arguments%&: This causes Exim to write the arguments with which it was called
 to the main log, preceded by the current working directory. This is a debugging
 feature, added to make it easier to find out how certain MUAs call
 &%arguments%&: This causes Exim to write the arguments with which it was called
 to the main log, preceded by the current working directory. This is a debugging
 feature, added to make it easier to find out how certain MUAs call


@@ -31477,7 +32264,7 @@ between the caller and Exim.
 connection is rejected, for whatever reason.
 .next
 .cindex "log" "delayed delivery"
 connection is rejected, for whatever reason.
 .next
 .cindex "log" "delayed delivery"

-.cindex "delayed delivery" "logging"
+.cindex "delayed delivery, logging"

 &%delay_delivery%&: A log entry is written whenever a delivery process is not
 started for an incoming message because the load is too high or too many
 messages were received on one connection. Logging does not occur if no delivery
 &%delay_delivery%&: A log entry is written whenever a delivery process is not
 started for an incoming message because the load is too high or too many
 messages were received on one connection. Logging does not occur if no delivery


@@ -31527,8 +32314,8 @@ rejection lines.
 .cindex "log" "incoming remote port"
 .cindex "port" "logging remote"
 .cindex "TCP/IP" "logging incoming remote port"
 .cindex "log" "incoming remote port"
 .cindex "port" "logging remote"
 .cindex "TCP/IP" "logging incoming remote port"

-.cindex "&$sender_fullhost$&"
-.cindex "&$sender_rcvhost$&"
+.vindex "&$sender_fullhost$&"
+.vindex "&$sender_rcvhost$&"

 &%incoming_port%&: The remote port number from which a message was received is
 added to log entries and &'Received:'& header lines, following the IP address
 in square brackets, and separated from it by a colon. This is implemented by
 &%incoming_port%&: The remote port number from which a message was received is
 added to log entries and &'Received:'& header lines, following the IP address
 in square brackets, and separated from it by a colon. This is implemented by


@@ -31548,6 +32335,11 @@ containing => tags) following the IP address. This option is not included in
 the default setting, because for most ordinary configurations, the remote port
 number is always 25 (the SMTP port).
 .next
 the default setting, because for most ordinary configurations, the remote port
 number is always 25 (the SMTP port).
 .next

+.cindex "log" "process ids in"
+.cindex "pid (process id)" "in log lines"
+&%pid%&: The current process id is added to every log line, in square brackets,
+immediately after the time and date.
+.next

 .cindex "log" "queue run"
 .cindex "queue runner" "logging"
 &%queue_run%&: The start and end of every queue run are logged.
 .cindex "log" "queue run"
 .cindex "queue runner" "logging"
 &%queue_run%&: The start and end of every queue run are logged.


@@ -31656,6 +32448,33 @@ RSET, QUIT, loss of connection, or otherwise, the incident is logged,
 and the message sender plus any accepted recipients are included in the log
 line. This can provide evidence of dictionary attacks.
 .next
 and the message sender plus any accepted recipients are included in the log
 line. This can provide evidence of dictionary attacks.
 .next

+.cindex "log" "non-MAIL SMTP sessions"
+.cindex "MAIL" "logging session without"
+&%smtp_no_mail%&: A line is written to the main log whenever an accepted SMTP
+connection terminates without having issued a MAIL command. This includes both
+the case when the connection is dropped, and the case when QUIT is used. It
+does not include cases where the connection is rejected right at the start (by
+an ACL, or because there are too many connections, or whatever). These cases
+already have their own log lines.
+
+The log line that is written contains the identity of the client in the usual
+way, followed by D= and a time, which records the duration of the connection.
+If the connection was authenticated, this fact is logged exactly as it is for
+an incoming message, with an A= item. If the connection was encrypted, CV=,
+DN=, and X= items may appear as they do for an incoming message, controlled by
+the same logging options.
+
+Finally, if any SMTP commands were issued during the connection, a C= item
+is added to the line, listing the commands that were used. For example,
+.code
+C=EHLO,QUIT
+.endd
+shows that the client issued QUIT straight after EHLO. If there were fewer
+than 20 commands, they are all listed. If there were more than 20 commands,
+the last 20 are listed, preceded by &"..."&. However, with the default
+setting of 10 for &%smtp_accep_max_nonmail%&, the connection will in any case
+have been aborted before 20 non-mail commands are processed.
+.next

 .cindex "log" "SMTP protocol error"
 .cindex "SMTP" "logging protocol error"
 &%smtp_protocol_error%&: A log line is written for every SMTP protocol error
 .cindex "log" "SMTP protocol error"
 .cindex "SMTP" "logging protocol error"
 &%smtp_protocol_error%&: A log line is written for every SMTP protocol error


@@ -31676,7 +32495,7 @@ external connection, the host identity is given; for an internal connection
 using &%-bs%& the sender identification (normally the calling user) is given.
 .next
 .cindex "log" "subject"
 using &%-bs%& the sender identification (normally the calling user) is given.
 .next
 .cindex "log" "subject"

-.cindex "subject" "logging"
+.cindex "subject, logging"

 &%subject%&: The subject of the message is added to the arrival log line,
 preceded by &"T="& (T for &"topic"&, since S is already used for &"size"&).
 Any MIME &"words"& in the subject are decoded. The &%print_topbitchars%& option
 &%subject%&: The subject of the message is added to the arrival log line,
 preceded by &"T="& (T for &"topic"&, since S is already used for &"size"&).
 Any MIME &"words"& in the subject are decoded. The &%print_topbitchars%& option


@@ -31705,11 +32524,11 @@ result of a list match is failure because a DNS lookup failed.
 .endlist
 
 
 .endlist
 
 

-.section "Message log"
+.section "Message log" "SECID260"

 .cindex "message" "log file for"
 .cindex "log" "message log; description of"
 .cindex "&_msglog_& directory"
 .cindex "message" "log file for"
 .cindex "log" "message log; description of"
 .cindex "&_msglog_& directory"

-.cindex "&%preserve_message_logs%&"
+.oindex "&%preserve_message_logs%&"

 In addition to the general log files, Exim writes a log file for each message
 that it handles. The names of these per-message logs are the message ids, and
 they are kept in the &_msglog_& sub-directory of the spool directory. Each
 In addition to the general log files, Exim writes a log file for each message
 that it handles. The names of these per-message logs are the message ids, and
 they are kept in the &_msglog_& sub-directory of the spool directory. Each


@@ -31725,6 +32544,8 @@ per-message logs, in order to reduce disk I/O. This can be done by setting the
 .ecindex IIDloggen
 
 
 .ecindex IIDloggen
 
 

+
+

 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 


@@ -31734,25 +32555,25 @@ A number of utility scripts and programs are supplied with Exim and are
 described in this chapter. There is also the Exim Monitor, which is covered in
 the next chapter. The utilities described here are:
 
 described in this chapter. There is also the Exim Monitor, which is covered in
 the next chapter. The utilities described here are:
 

-.itable none 0 0 4  2* left  8* left  30* left  40* left
-.row "" &<<SECTfinoutwha>>&     &'exiwhat'&       &&&
+.itable none 0 0 3  7* left  15* left  40* left
+.irow &<<SECTfinoutwha>>&     &'exiwhat'&       &&&

   "list what Exim processes are doing"
   "list what Exim processes are doing"

-.row "" &<<SECTgreptheque>>&    &'exiqgrep'&      "grep the queue"
-.row "" &<<SECTsumtheque>>&     &'exiqsumm'&      "summarize the queue"
-.row "" &<<SECTextspeinf>>&     &'exigrep'&       "search the main log"
-.row "" &<<SECTexipick>>&       &'exipick'&       "select messages on &&&
-                                                   various criteria"
-.row "" &<<SECTcyclogfil>>&     &'exicyclog'&     "cycle (rotate) log files"
-.row "" &<<SECTmailstat>>&      &'eximstats'&     &&&
+.irow &<<SECTgreptheque>>&    &'exiqgrep'&      "grep the queue"
+.irow &<<SECTsumtheque>>&     &'exiqsumm'&      "summarize the queue"
+.irow &<<SECTextspeinf>>&     &'exigrep'&       "search the main log"
+.irow &<<SECTexipick>>&       &'exipick'&       "select messages on &&&
+                                                various criteria"
+.irow &<<SECTcyclogfil>>&     &'exicyclog'&     "cycle (rotate) log files"
+.irow &<<SECTmailstat>>&      &'eximstats'&     &&&

   "extract statistics from the log"
   "extract statistics from the log"

-.row "" &<<SECTcheckaccess>>&   &'exim_checkaccess'& &&&
+.irow &<<SECTcheckaccess>>&   &'exim_checkaccess'& &&&

   "check address acceptance from given IP"
   "check address acceptance from given IP"

-.row "" &<<SECTdbmbuild>>&      &'exim_dbmbuild'& "build a DBM file"
-.row "" &<<SECTfinindret>>&     &'exinext'&       "extract retry information"
-.row "" &<<SECThindatmai>>&     &'exim_dumpdb'&   "dump a hints database"
-.row "" &<<SECThindatmai>>&     &'exim_tidydb'&   "clean up a hints database"
-.row "" &<<SECThindatmai>>&     &'exim_fixdb'&    "patch a hints database"
-.row "" &<<SECTmailboxmaint>>&  &'exim_lock'&     "lock a mailbox file"
+.irow &<<SECTdbmbuild>>&      &'exim_dbmbuild'& "build a DBM file"
+.irow &<<SECTfinindret>>&     &'exinext'&       "extract retry information"
+.irow &<<SECThindatmai>>&     &'exim_dumpdb'&   "dump a hints database"
+.irow &<<SECThindatmai>>&     &'exim_tidydb'&   "clean up a hints database"
+.irow &<<SECThindatmai>>&     &'exim_fixdb'&    "patch a hints database"
+.irow &<<SECTmailboxmaint>>&  &'exim_lock'&     "lock a mailbox file"

 .endtable
 
 Another utility that might be of use to sites with many MTAs is Tom Kistner's
 .endtable
 
 Another utility that might be of use to sites with many MTAs is Tom Kistner's


@@ -31764,7 +32585,7 @@ Another utility that might be of use to sites with many MTAs is Tom Kistner's
 
 .section "Finding out what Exim processes are doing (exiwhat)" "SECTfinoutwha"
 .cindex "&'exiwhat'&"
 
 .section "Finding out what Exim processes are doing (exiwhat)" "SECTfinoutwha"
 .cindex "&'exiwhat'&"

-.cindex "process" "querying"
+.cindex "process, querying"

 .cindex "SIGUSR1"
 On operating systems that can restart a system call after receiving a signal
 (most modern OS), an Exim process responds to the SIGUSR1 signal by writing
 .cindex "SIGUSR1"
 On operating systems that can restart a system call after receiving a signal
 (most modern OS), an Exim process responds to the SIGUSR1 signal by writing


@@ -31868,7 +32689,7 @@ There is one more option, &%-h%&, which outputs a list of options.
 
 
 
 
 
 

-.section "Summarising the queue (exiqsumm)" "SECTsumtheque"
+.section "Summarizing the queue (exiqsumm)" "SECTsumtheque"

 .cindex "&'exiqsumm'&"
 .cindex "queue" "summary"
 The &'exiqsumm'& utility is a Perl script which reads the output of &`exim
 .cindex "&'exiqsumm'&"
 .cindex "queue" "summary"
 The &'exiqsumm'& utility is a Perl script which reads the output of &`exim


@@ -31887,7 +32708,6 @@ volume, and the length of time that the oldest and the newest messages have
 been waiting. Note that the number of pending deliveries is greater than the
 number of messages when messages have more than one recipient.
 
 been waiting. Note that the number of pending deliveries is greater than the
 number of messages when messages have more than one recipient.
 

-.new

 A summary line is output at the end. By default the output is sorted on the
 domain name, but &'exiqsumm'& has the options &%-a%& and &%-c%&, which cause
 the output to be sorted by oldest message and by count of messages,
 A summary line is output at the end. By default the output is sorted on the
 domain name, but &'exiqsumm'& has the options &%-a%& and &%-c%&, which cause
 the output to be sorted by oldest message and by count of messages,


@@ -31895,7 +32715,6 @@ respectively. There are also three options that split the messages for each
 domain into two or more subcounts: &%-b%& separates bounce messages, &%-f%&
 separates frozen messages, and &%-s%& separates messages according to their
 sender.
 domain into two or more subcounts: &%-b%& separates bounce messages, &%-f%&
 separates frozen messages, and &%-s%& separates messages according to their
 sender.

-.wen

 
 The output of &'exim -bp'& contains the original addresses in the message, so
 this also applies to the output from &'exiqsumm'&. No domains from addresses
 
 The output of &'exim -bp'& contains the original addresses in the message, so
 this also applies to the output from &'exiqsumm'&. No domains from addresses


@@ -31916,20 +32735,29 @@ extracts all the log entries for the relevant message, not just those that
 match the pattern. Thus, &'exigrep'& can extract complete log entries for a
 given message, or all mail for a given user, or for a given host, for example.
 The input files can be in Exim log format or syslog format.
 match the pattern. Thus, &'exigrep'& can extract complete log entries for a
 given message, or all mail for a given user, or for a given host, for example.
 The input files can be in Exim log format or syslog format.

-
-If a matching log line is not associated with a specific message, it is always
-included in &'exigrep'&'s output. The usage is:
+If a matching log line is not associated with a specific message, it is
+included in &'exigrep'&'s output without any additional lines. The usage is:

 .display
 .display

-&`exigrep [-l] [-t<`&&'n'&&`>] <`&&'pattern'&&`> [<`&&'log file'&&`>] ...`&
+&`exigrep [-t<`&&'n'&&`>] [-I] [-l] [-v] <`&&'pattern'&&`> [<`&&'log file'&&`>] ...`&

 .endd
 .endd

+If no log file names are given on the command line, the standard input is read.
+

 The &%-t%& argument specifies a number of seconds. It adds an additional
 condition for message selection. Messages that are complete are shown only if
 they spent more than <&'n'&> seconds on the queue.
 
 The &%-t%& argument specifies a number of seconds. It adds an additional
 condition for message selection. Messages that are complete are shown only if
 they spent more than <&'n'&> seconds on the queue.
 

-The &%-l%& flag means &"literal"&, that is, treat all characters in the
+By default, &'exigrep'& does case-insensitive matching. The &%-I%& option
+makes it case-sensitive. This may give a performance improvement when searching
+large log files. Without &%-I%&, the Perl pattern matches use Perl's &`/i`&
+option; with &%-I%& they do not. In both cases it is possible to change the
+case sensitivity within the pattern by using &`(?i)`& or &`(?-i)`&.
+
+The &%-l%& option means &"literal"&, that is, treat all characters in the

 pattern as standing for themselves. Otherwise the pattern must be a Perl
 pattern as standing for themselves. Otherwise the pattern must be a Perl

-regular expression. The pattern match is case-insensitive. If no file names are
-given on the command line, the standard input is read.
+regular expression.
+
+The &%-v%& option inverts the matching condition. That is, a line is selected
+if it does &'not'& match the pattern.

 
 If the location of a &'zcat'& command is known from the definition of
 ZCAT_COMMAND in &_Local/Makefile_&, &'exigrep'& automatically passes any file
 
 If the location of a &'zcat'& command is known from the definition of
 ZCAT_COMMAND in &_Local/Makefile_&, &'exigrep'& automatically passes any file


@@ -31939,11 +32767,10 @@ whose name ends in COMPRESS_SUFFIX through &'zcat'& as it searches it.
 .section "Selecting messages by various criteria (exipick)" "SECTexipick"
 .cindex "&'exipick'&"
 John Jetmore's &'exipick'& utility is included in the Exim distribution. It
 .section "Selecting messages by various criteria (exipick)" "SECTexipick"
 .cindex "&'exipick'&"
 John Jetmore's &'exipick'& utility is included in the Exim distribution. It

-lists messages from the queue according to a variety of criteria. For details,
-visit &url(http://www.exim.org/eximwiki/ToolExipickManPage) or run:
-.code
-exipick --help
-.endd
+lists messages from the queue according to a variety of criteria. For details
+of &'exipick'&'s facilities, visit the web page at
+&url(http://www.exim.org/eximwiki/ToolExipickManPage) or run &'exipick'& with
+the &%--help%& option.

 
 
 .section "Cycling log files (exicyclog)" "SECTcyclogfil"
 
 
 .section "Cycling log files (exicyclog)" "SECTcyclogfil"


@@ -31996,7 +32823,7 @@ assuming you have used the name &"exim"& for the Exim user. You can run
 .cindex "&'eximstats'&"
 A Perl script called &'eximstats'& is provided for extracting statistical
 information from log files. The output is either plain text, or HTML.
 .cindex "&'eximstats'&"
 A Perl script called &'eximstats'& is provided for extracting statistical
 information from log files. The output is either plain text, or HTML.

-Exim log files are also suported by the &'Lire'& system produced by the
+Exim log files are also supported by the &'Lire'& system produced by the

 LogReport Foundation &url(http://www.logreport.org).
 
 The &'eximstats'& script has been hacked about quite a bit over time. The
 LogReport Foundation &url(http://www.logreport.org).
 
 The &'eximstats'& script has been hacked about quite a bit over time. The


@@ -32218,7 +33045,7 @@ Serializing delivery to a specific host (when &%serialize_hosts%& is set in an
 
 
 
 
 
 

-.section "exim_dumpdb"
+.section "exim_dumpdb" "SECID261"

 .cindex "&'exim_dumpdb'&"
 The entire contents of a database are written to the standard output by the
 &'exim_dumpdb'& program, which has no options or arguments other than the
 .cindex "&'exim_dumpdb'&"
 The entire contents of a database are written to the standard output by the
 &'exim_dumpdb'& program, which has no options or arguments other than the


@@ -32235,7 +33062,7 @@ The first item on the first line is the key of the record. It starts with one
 of the letters R, or T, depending on whether it refers to a routing or
 transport retry. For a local delivery, the next part is the local address; for
 a remote delivery it is the name of the remote host, followed by its failing IP
 of the letters R, or T, depending on whether it refers to a routing or
 transport retry. For a local delivery, the next part is the local address; for
 a remote delivery it is the name of the remote host, followed by its failing IP

-address (unless &%no_retry_include_ip_address%& is set on the &(smtp)&
+address (unless &%retry_include_ip_address%& is set false on the &(smtp)&

 transport). If the remote port is not the standard one (port 25), it is added
 to the IP address. Then there follows an error code, an additional error code,
 and a textual description of the error.
 transport). If the remote port is not the standard one (port 25), it is added
 to the IP address. Then there follows an error code, an additional error code,
 and a textual description of the error.


@@ -32255,7 +33082,7 @@ cross-references.
 
 
 
 
 
 

-.section "exim_tidydb"
+.section "exim_tidydb" "SECID262"

 .cindex "&'exim_tidydb'&"
 The &'exim_tidydb'& utility program is used to tidy up the contents of a hints
 database. If run with no options, it removes all records that are more than 30
 .cindex "&'exim_tidydb'&"
 The &'exim_tidydb'& utility program is used to tidy up the contents of a hints
 database. If run with no options, it removes all records that are more than 30


@@ -32304,7 +33131,7 @@ databases is likely to keep on increasing.
 
 
 
 
 
 

-.section "exim_fixdb"
+.section "exim_fixdb" "SECID263"

 .cindex "&'exim_fixdb'&"
 The &'exim_fixdb'& program is a utility for interactively modifying databases.
 Its main use is for testing Exim, but it might also be occasionally useful for
 .cindex "&'exim_fixdb'&"
 The &'exim_fixdb'& program is a utility for interactively modifying databases.
 Its main use is for testing Exim, but it might also be occasionally useful for


@@ -32440,7 +33267,7 @@ monitor itself makes use of the command line to perform any actions requested.
 
 
 
 
 
 

-.section "Running the monitor"
+.section "Running the monitor" "SECID264"

 The monitor is started by running the script called &'eximon'&. This is a shell
 script that sets up a number of environment variables, and then runs the
 binary called &_eximon.bin_&. The default appearance of the monitor window can
 The monitor is started by running the script called &'eximon'&. This is a shell
 script that sets up a number of environment variables, and then runs the
 binary called &_eximon.bin_&. The default appearance of the monitor window can


@@ -32490,7 +33317,7 @@ different parts of the display.
 
 
 
 
 
 

-.section "The stripcharts"
+.section "The stripcharts" "SECID265"

 .cindex "stripchart"
 The first stripchart is always a count of messages on the queue. Its name can
 be configured by setting QUEUE_STRIPCHART_NAME in the
 .cindex "stripchart"
 The first stripchart is always a count of messages on the queue. Its name can
 be configured by setting QUEUE_STRIPCHART_NAME in the


@@ -32522,7 +33349,7 @@ SIZE_STRIPCHART and (optionally) SIZE_STRIPCHART_NAME in the
 
 
 
 
 
 

-.section "Main action buttons"
+.section "Main action buttons" "SECID266"

 .cindex "size" "of monitor window"
 .cindex "Exim monitor" "window size"
 .cindex "window size"
 .cindex "size" "of monitor window"
 .cindex "Exim monitor" "window size"
 .cindex "window size"


@@ -32551,7 +33378,7 @@ START_SMALL=yes in &_Local/eximon.conf_&.
 
 
 
 
 
 

-.section "The log display"
+.section "The log display" "SECID267"

 .cindex "log" "tail of; in monitor"
 The second section of the window is an area in which a display of the tail of
 the main log is maintained.
 .cindex "log" "tail of; in monitor"
 The second section of the window is an area in which a display of the tail of
 the main log is maintained.


@@ -32605,7 +33432,7 @@ window.
 
 
 
 
 
 

-.section "The queue display"
+.section "The queue display" "SECID268"

 .cindex "queue" "display in monitor"
 The bottom section of the monitor window contains a list of all messages that
 are on the queue, which includes those currently being received or delivered,
 .cindex "queue" "display in monitor"
 The bottom section of the monitor window contains a list of all messages that
 are on the queue, which includes those currently being received or delivered,


@@ -32657,7 +33484,7 @@ display is updated.
 
 
 
 
 
 

-.section "The queue menu"
+.section "The queue menu" "SECID269"

 .cindex "queue" "menu in monitor"
 If the &%shift%& key is held down and the left button is clicked when the mouse
 pointer is over the text for any message, an action menu pops up, and the first
 .cindex "queue" "menu in monitor"
 If the &%shift%& key is held down and the left button is clicked when the mouse
 pointer is over the text for any message, an action menu pops up, and the first


@@ -32783,7 +33610,7 @@ absence of bugs can never be guaranteed. Any that are reported will get fixed
 as soon as possible.
 
 
 as soon as possible.
 
 

-.section "Building a more &""hardened""& Exim"
+.section "Building a more &""hardened""& Exim" "SECID286"

 .cindex "security" "build-time features"
 There are a number of build-time options that can be set in &_Local/Makefile_&
 to create Exim binaries that are &"harder"& to attack, in particular by a rogue
 .cindex "security" "build-time features"
 There are a number of build-time options that can be set in &_Local/Makefile_&
 to create Exim binaries that are &"harder"& to attack, in particular by a rogue


@@ -32826,7 +33653,7 @@ is permitted to modify the runtime file from using Exim as a way to get root.
 
 
 
 
 
 

-.section "Root privilege"
+.section "Root privilege" "SECID270"

 .cindex "setuid"
 .cindex "root privilege"
 The Exim binary is normally setuid to root, which means that it gains root
 .cindex "setuid"
 .cindex "root privilege"
 The Exim binary is normally setuid to root, which means that it gains root


@@ -32863,8 +33690,8 @@ After a new Exim process has interpreted its command line options, it changes
 uid and gid in the following cases:
 
 .ilist
 uid and gid in the following cases:
 
 .ilist

-.cindex "&%-C%& option"
-.cindex "&%-D%& option"
+.oindex "&%-C%&"
+.oindex "&%-D%&"

 If the &%-C%& option is used to specify an alternate configuration file, or if
 the &%-D%& option is used to define macro values for the configuration, and the
 calling process is not running as root or the Exim user, the uid and gid are
 If the &%-C%& option is used to specify an alternate configuration file, or if
 the &%-D%& option is used to define macro values for the configuration, and the
 calling process is not running as root or the Exim user, the uid and gid are


@@ -32873,9 +33700,9 @@ However, if ALT_CONFIG_ROOT_ONLY is defined in &_Local/Makefile_&, only
 root callers may use &%-C%& and &%-D%& without losing privilege, and if
 DISABLE_D_OPTION is set, the &%-D%& option may not be used at all.
 .next
 root callers may use &%-C%& and &%-D%& without losing privilege, and if
 DISABLE_D_OPTION is set, the &%-D%& option may not be used at all.
 .next

-.cindex "&%-be%& option"
-.cindex "&%-bf%& option"
-.cindex "&%-bF%& option"
+.oindex "&%-be%&"
+.oindex "&%-bf%&"
+.oindex "&%-bF%&"

 If the expansion test option (&%-be%&) or one of the filter testing options
 (&%-bf%& or &%-bF%&) are used, the uid and gid are changed to those of the
 calling process.
 If the expansion test option (&%-be%&) or one of the filter testing options
 (&%-bf%& or &%-bF%&) are used, the uid and gid are changed to those of the
 calling process.


@@ -32885,8 +33712,8 @@ process or a process for testing address routing (started with &%-bt%&), the
 uid and gid are changed to the Exim user and group. This means that Exim always
 runs under its own uid and gid when receiving messages. This also applies when
 testing address verification
 uid and gid are changed to the Exim user and group. This means that Exim always
 runs under its own uid and gid when receiving messages. This also applies when
 testing address verification

-.cindex "&%-bv%& option"
-.cindex "&%-bh%& option"
+.oindex "&%-bv%&"
+.oindex "&%-bh%&"

 (the &%-bv%& option) and testing incoming message policy controls (the &%-bh%&
 option).
 .next
 (the &%-bv%& option) and testing incoming message policy controls (the &%-bh%&
 option).
 .next


@@ -32927,7 +33754,7 @@ the routing is done in the same environment as a message delivery.
 
 
 .section "Running Exim without privilege" "SECTrunexiwitpri"
 
 
 .section "Running Exim without privilege" "SECTrunexiwitpri"

-.cindex "privilege" "running without"
+.cindex "privilege, running without"

 .cindex "unprivileged running"
 .cindex "root privilege" "running without"
 Some installations like to run Exim in an unprivileged state for more of its
 .cindex "unprivileged running"
 .cindex "root privilege" "running without"
 Some installations like to run Exim in an unprivileged state for more of its


@@ -32995,7 +33822,7 @@ Unless the local user mailboxes are all owned by the Exim user (possible in
 some POP3 or IMAP-only environments):
 
 .olist
 some POP3 or IMAP-only environments):
 
 .olist

-They must be owned by the Exim group and be writable by that group. This
+They must be owned by the Exim group and be writeable by that group. This

 implies you must set &%mode%& in the appendfile configuration, as well as the
 mode of the mailbox files themselves.
 .next
 implies you must set &%mode%& in the appendfile configuration, as well as the
 mode of the mailbox files themselves.
 .next


@@ -33020,13 +33847,13 @@ If you are using the &%mua_wrapper%& facility (see chapter
 
 
 
 
 
 

-.section "Delivering to local files"
+.section "Delivering to local files" "SECID271"

 Full details of the checks applied by &(appendfile)& before it writes to a file
 are given in chapter &<<CHAPappendfile>>&.
 
 
 
 Full details of the checks applied by &(appendfile)& before it writes to a file
 are given in chapter &<<CHAPappendfile>>&.
 
 
 

-.section "IPv4 source routing"
+.section "IPv4 source routing" "SECID272"

 .cindex "source routing" "in IP packets"
 .cindex "IP source routing"
 Many operating systems suppress IP source-routed packets in the kernel, but
 .cindex "source routing" "in IP packets"
 .cindex "IP source routing"
 Many operating systems suppress IP source-routed packets in the kernel, but


@@ -33036,26 +33863,26 @@ IPv6. No special checking is currently done.
 
 
 
 
 
 

-.section "The VRFY, EXPN, and ETRN commands in SMTP"
+.section "The VRFY, EXPN, and ETRN commands in SMTP" "SECID273"

 Support for these SMTP commands is disabled by default. If required, they can
 be enabled by defining suitable ACLs.
 
 
 
 
 Support for these SMTP commands is disabled by default. If required, they can
 be enabled by defining suitable ACLs.
 
 
 
 

-.section "Privileged users"
-.cindex "trusted user"
+.section "Privileged users" "SECID274"
+.cindex "trusted users"

 .cindex "admin user"
 .cindex "privileged user"
 .cindex "user" "trusted"
 .cindex "user" "admin"
 .cindex "admin user"
 .cindex "privileged user"
 .cindex "user" "trusted"
 .cindex "user" "admin"

-Exim recognises two sets of users with special privileges. Trusted users are
+Exim recognizes two sets of users with special privileges. Trusted users are

 able to submit new messages to Exim locally, but supply their own sender
 addresses and information about a sending host. For other users submitting
 local messages, Exim sets up the sender address from the uid, and doesn't
 permit a remote host to be specified.
 
 able to submit new messages to Exim locally, but supply their own sender
 addresses and information about a sending host. For other users submitting
 local messages, Exim sets up the sender address from the uid, and doesn't
 permit a remote host to be specified.
 

-.cindex "&%-f%& option"
+.oindex "&%-f%&"

 However, an untrusted user is permitted to use the &%-f%& command line option
 in the special form &%-f <>%& to indicate that a delivery failure for the
 message should not cause an error report. This affects the message's envelope,
 However, an untrusted user is permitted to use the &%-f%& command line option
 in the special form &%-f <>%& to indicate that a delivery failure for the
 message should not cause an error report. This affects the message's envelope,


@@ -33075,8 +33902,8 @@ them entirely, or modify them in various ways. In addition, admin users can run
 the Exim monitor and see all the information it is capable of providing, which
 includes the contents of files on the spool.
 
 the Exim monitor and see all the information it is capable of providing, which
 includes the contents of files on the spool.
 

-.cindex "&%-M%& option"
-.cindex "&%-q%& option"
+.oindex "&%-M%&"
+.oindex "&%-q%&"

 By default, the use of the &%-M%& and &%-q%& options to cause Exim to attempt
 delivery of messages on its queue is restricted to admin users. This
 restriction can be relaxed by setting the &%no_prod_requires_admin%& option.
 By default, the use of the &%-M%& and &%-q%& options to cause Exim to attempt
 delivery of messages on its queue is restricted to admin users. This
 restriction can be relaxed by setting the &%no_prod_requires_admin%& option.


@@ -33084,7 +33911,7 @@ Similarly, the use of &%-bp%& (and its variants) to list the contents of the
 queue is also restricted to admin users. This restriction can be relaxed by
 setting &%no_queue_list_requires_admin%&.
 
 queue is also restricted to admin users. This restriction can be relaxed by
 setting &%no_queue_list_requires_admin%&.
 

-Exim recognises an admin user if the calling process is running as root or as
+Exim recognizes an admin user if the calling process is running as root or as

 the Exim user or if any of the groups associated with the calling process is
 the Exim group. It is not necessary actually to be running under the Exim
 group. However, if admin users who are not root or the Exim user are to access
 the Exim user or if any of the groups associated with the calling process is
 the Exim group. It is not necessary actually to be running under the Exim
 group. However, if admin users who are not root or the Exim user are to access


@@ -33094,7 +33921,7 @@ files.
 
 
 
 
 
 

-.section "Spool files"
+.section "Spool files" "SECID275"

 .cindex "spool directory" "files"
 Exim's spool directory and everything it contains is owned by the Exim user and
 set to the Exim group. The mode for spool files is defined in the
 .cindex "spool directory" "files"
 Exim's spool directory and everything it contains is owned by the Exim user and
 set to the Exim group. The mode for spool files is defined in the


@@ -33103,7 +33930,7 @@ any user who is a member of the Exim group can access these files.
 
 
 
 
 
 

-.section "Use of argv[0]"
+.section "Use of argv[0]" "SECID276"

 Exim examines the last component of &%argv[0]%&, and if it matches one of a set
 of specific strings, Exim assumes certain options. For example, calling Exim
 with the last component of &%argv[0]%& set to &"rsmtp"& is exactly equivalent
 Exim examines the last component of &%argv[0]%&, and if it matches one of a set
 of specific strings, Exim assumes certain options. For example, calling Exim
 with the last component of &%argv[0]%& set to &"rsmtp"& is exactly equivalent


@@ -33112,7 +33939,7 @@ this.
 
 
 
 
 
 

-.section "Use of %f formatting"
+.section "Use of %f formatting" "SECID277"

 The only use made of &"%f"& by Exim is in formatting load average values. These
 are actually stored in integer variables as 1000 times the load average.
 Consequently, their range is limited and so therefore is the length of the
 The only use made of &"%f"& by Exim is in formatting load average values. These
 are actually stored in integer variables as 1000 times the load average.
 Consequently, their range is limited and so therefore is the length of the


@@ -33120,7 +33947,7 @@ converted output.
 
 
 
 
 
 

-.section "Embedded Exim path"
+.section "Embedded Exim path" "SECID278"

 Exim uses its own path name, which is embedded in the code, only when it needs
 to re-exec in order to regain root privilege. Therefore, it is not root when it
 does so. If some bug allowed the path to get overwritten, it would lead to an
 Exim uses its own path name, which is embedded in the code, only when it needs
 to re-exec in order to regain root privilege. Therefore, it is not root when it
 does so. If some bug allowed the path to get overwritten, it would lead to an


@@ -33128,7 +33955,7 @@ arbitrary program's being run as exim, not as root.
 
 
 
 
 
 

-.section "Use of sprintf()"
+.section "Use of sprintf()" "SECID279"

 .cindex "&[sprintf()]&"
 A large number of occurrences of &"sprintf"& in the code are actually calls to
 &'string_sprintf()'&, a function that returns the result in malloc'd store.
 .cindex "&[sprintf()]&"
 A large number of occurrences of &"sprintf"& in the code are actually calls to
 &'string_sprintf()'&, a function that returns the result in malloc'd store.


@@ -33142,14 +33969,14 @@ string.
 
 
 
 
 
 

-.section "Use of debug_printf() and log_write()"
+.section "Use of debug_printf() and log_write()" "SECID280"

 Arbitrary strings are passed to both these functions, but they do their
 formatting by calling the function &'string_vformat()'&, which runs through
 the format string itself, and checks the length of each conversion.
 
 
 
 Arbitrary strings are passed to both these functions, but they do their
 formatting by calling the function &'string_vformat()'&, which runs through
 the format string itself, and checks the length of each conversion.
 
 
 

-.section "Use of strcat() and strcpy()"
+.section "Use of strcat() and strcpy()" "SECID281"

 These are used only in cases where the output buffer is known to be large
 enough to hold the result.
 .ecindex IIDsecurcon
 These are used only in cases where the output buffer is known to be large
 enough to hold the result.
 .ecindex IIDsecurcon


@@ -33184,7 +34011,7 @@ which is what Exim itself does, using &[fcntl()]&. If you update the file in
 place, the lock will be retained. If you write a new file and rename it, the
 lock will be lost at the instant of rename.
 .next
 place, the lock will be retained. If you write a new file and rename it, the
 lock will be lost at the instant of rename.
 .next

-.cindex "&$body_linecount$&"
+.vindex "&$body_linecount$&"

 If you change the number of lines in the file, the value of
 &$body_linecount$&, which is stored in the -H file, will be incorrect. At
 present, this value is not used by Exim, but there is no guarantee that this
 If you change the number of lines in the file, the value of
 &$body_linecount$&, which is stored in the -H file, will be incorrect. At
 present, this value is not used by Exim, but there is no guarantee that this


@@ -33195,22 +34022,26 @@ If the message is in MIME format, you must take care not to break it.
 If the message is cryptographically signed, any change will invalidate the
 signature.
 .endlist
 If the message is cryptographically signed, any change will invalidate the
 signature.
 .endlist

-
+All in all, modifying -D files is fraught with danger.

 
 Files whose names end with -J may also be seen in the &_input_& directory (or
 its subdirectories when &%split_spool_directory%& is set). These are journal
 files, used to record addresses to which the message has been delivered during
 
 Files whose names end with -J may also be seen in the &_input_& directory (or
 its subdirectories when &%split_spool_directory%& is set). These are journal
 files, used to record addresses to which the message has been delivered during

-the course of a delivery run. At the end of the run, the -H file is updated,
-and the -J file is deleted.
-
+the course of a delivery attempt. If there are still undelivered recipients at
+the end, the -H file is updated, and the -J file is deleted. If, however, there
+is some kind of crash (for example, a power outage) before this happens, the -J
+file remains in existence. When Exim next processes the message, it notices the
+-J file and uses it to update the -H file before starting the next delivery
+attempt.

 
 

-.section "Format of the -H file"
+.section "Format of the -H file" "SECID282"

 .cindex "uid (user id)" "in spool file"
 .cindex "gid (group id)" "in spool file"
 The second line of the -H file contains the login name for the uid of the
 process that called Exim to read the message, followed by the numerical uid and
 gid. For a locally generated message, this is normally the user who sent the
 .cindex "uid (user id)" "in spool file"
 .cindex "gid (group id)" "in spool file"
 The second line of the -H file contains the login name for the uid of the
 process that called Exim to read the message, followed by the numerical uid and
 gid. For a locally generated message, this is normally the user who sent the

-message. For a message received over TCP/IP, it is normally the Exim user.
+message. For a message received over TCP/IP via the daemon, it is
+normally the Exim user.

 
 The third line of the file contains the address of the message's sender as
 transmitted in the envelope, contained in angle brackets. The sender address is
 
 The third line of the file contains the address of the message's sender as
 transmitted in the envelope, contained in angle brackets. The sender address is


@@ -33241,7 +34072,6 @@ the data string for the variable. The string itself starts at the beginning of
 the next line, and is followed by a newline character. It may contain internal
 newlines.
 
 the next line, and is followed by a newline character. It may contain internal
 newlines.
 

-.new

 .vitem "&%-aclc%&&~<&'rest-of-name'&>&~<&'length'&>"
 A line of this form is present for every ACL connection variable that is
 defined. Note that there is a space between &%-aclc%& and the rest of the name.
 .vitem "&%-aclc%&&~<&'rest-of-name'&>&~<&'length'&>"
 A line of this form is present for every ACL connection variable that is
 defined. Note that there is a space between &%-aclc%& and the rest of the name.


@@ -33255,7 +34085,6 @@ Note that there is a space between &%-aclm%& and the rest of the name. The
 length is the length of the data string for the variable. The string itself
 starts at the beginning of the next line, and is followed by a newline
 character. It may contain internal newlines.
 length is the length of the data string for the variable. The string itself
 starts at the beginning of the next line, and is followed by a newline
 character. It may contain internal newlines.

-.wen

 
 .vitem "&%-active_hostname%&&~<&'hostname'&>"
 This is present if, when the message was received over SMTP, the value of
 
 .vitem "&%-active_hostname%&&~<&'hostname'&>"
 This is present if, when the message was received over SMTP, the value of


@@ -33478,10 +34307,10 @@ unqualified domain &'foundation'&.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "Adding new drivers or lookup types" "" &&&
+.chapter "Adding new drivers or lookup types" "CHID12" &&&

          "Adding drivers or lookups"
 .cindex "adding drivers"
          "Adding drivers or lookups"
 .cindex "adding drivers"

-.cindex "new drivers" "adding"
+.cindex "new drivers, adding"

 .cindex "drivers" "adding new"
 The following actions have to be taken in order to add a new router, transport,
 authenticator, or lookup type to Exim:
 .cindex "drivers" "adding new"
 The following actions have to be taken in order to add a new router, transport,
 authenticator, or lookup type to Exim:


@@ -33532,9 +34361,24 @@ the interface that is expected.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.makeindex "Option index" "option"
+. /////////////////////////////////////////////////////////////////////////////
+. These lines are processing instructions for the Simple DocBook Processor that
+. Philip Hazel has developed as a less cumbersome way of making PostScript and
+. PDFs than using xmlto and fop. They will be ignored by all other XML
+. processors.
+. /////////////////////////////////////////////////////////////////////////////
+
+.literal xml
+<?sdop
+  format="newpage"
+  foot_right_recto="&chaptertitle;"
+  foot_right_verso="&chaptertitle;"
+?>
+.literal off

 
 

-.makeindex "Concept index" "concept"
+.makeindex "Options index"   "option"
+.makeindex "Variables index" "variable"
+.makeindex "Concept index"   "concept"

 
 
 . /////////////////////////////////////////////////////////////////////////////
 
 
 . /////////////////////////////////////////////////////////////////////////////