DSCP: inbound via control = dscp/<value>

[users/heiko/exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 9b59f057825ff676c7b3ef58ab58f268ef26ca07..b8507f9655808a388ddab4e2799704f3f3d6ecb8 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -45,8 +45,8 @@
 . the <bookinfo> element must also be updated for each new edition.
 . /////////////////////////////////////////////////////////////////////////////
 
 . the <bookinfo> element must also be updated for each new edition.
 . /////////////////////////////////////////////////////////////////////////////
 

-.set previousversion "4.75"
-.set version "4.77"
+.set previousversion "4.80"
+.set version "4.80"

 
 .set ACL "access control lists (ACLs)"
 .set I   "&nbsp;&nbsp;&nbsp;&nbsp;"
 
 .set ACL "access control lists (ACLs)"
 .set I   "&nbsp;&nbsp;&nbsp;&nbsp;"


@@ -170,15 +170,15 @@
 <bookinfo>
 <title>Specification of the Exim Mail Transfer Agent</title>
 <titleabbrev>The Exim MTA</titleabbrev>
 <bookinfo>
 <title>Specification of the Exim Mail Transfer Agent</title>
 <titleabbrev>The Exim MTA</titleabbrev>

-<date>06 May 2011</date>
+<date>17 May 2012</date>

 <author><firstname>Exim</firstname><surname>Maintainers</surname></author>
 <authorinitials>EM</authorinitials>
 <revhistory><revision>
 <author><firstname>Exim</firstname><surname>Maintainers</surname></author>
 <authorinitials>EM</authorinitials>
 <revhistory><revision>

-  <revnumber>4.77</revnumber>
-  <date>10 Oct 2011</date>
+  <revnumber>4.80</revnumber>
+  <date>17 May 2012</date>

   <authorinitials>EM</authorinitials>
 </revision></revhistory>
   <authorinitials>EM</authorinitials>
 </revision></revhistory>

-<copyright><year>2011</year><holder>University of Cambridge</holder></copyright>
+<copyright><year>2012</year><holder>University of Cambridge</holder></copyright>

 </bookinfo>
 .literal off
 
 </bookinfo>
 .literal off
 


@@ -1654,10 +1654,13 @@ modern systems include PCRE as a system library, although you may need
 to install the PCRE or PCRE development package for your operating
 system. If your system has a normal PCRE installation the Exim build
 process will need no further configuration. If the library or the
 to install the PCRE or PCRE development package for your operating
 system. If your system has a normal PCRE installation the Exim build
 process will need no further configuration. If the library or the

-headers are in an unusual location you will need to set the PCRE_LIBS
-and INCLUDE directives appropriately. If your operating system has no
+headers are in an unusual location you will need to either set the PCRE_LIBS
+and INCLUDE directives appropriately,
+or set PCRE_CONFIG=yes to use the installed &(pcre-config)& command.
+If your operating system has no

 PCRE support then you will need to obtain and build the current PCRE
 from &url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/).
 PCRE support then you will need to obtain and build the current PCRE
 from &url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/).

+More information on PCRE is available at &url(http://www.pcre.org/).

 
 .section "DBM libraries" "SECTdb"
 .cindex "DBM libraries" "discussion of"
 
 .section "DBM libraries" "SECTdb"
 .cindex "DBM libraries" "discussion of"


@@ -1868,6 +1871,12 @@ SUPPORT_TLS=yes
 TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
 TLS_INCLUDE=-I/usr/local/openssl/include/
 .endd
 TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
 TLS_INCLUDE=-I/usr/local/openssl/include/
 .endd

+.cindex "pkg-config" "OpenSSL"
+If you have &'pkg-config'& available, then instead you can just use:
+.code
+SUPPORT_TLS=yes
+USE_OPENSSL_PC=openssl
+.endd

 .cindex "USE_GNUTLS"
 If GnuTLS is installed, you should set
 .code
 .cindex "USE_GNUTLS"
 If GnuTLS is installed, you should set
 .code


@@ -1883,6 +1892,14 @@ USE_GNUTLS=yes
 TLS_LIBS=-L/usr/gnu/lib -lgnutls -ltasn1 -lgcrypt
 TLS_INCLUDE=-I/usr/gnu/include
 .endd
 TLS_LIBS=-L/usr/gnu/lib -lgnutls -ltasn1 -lgcrypt
 TLS_INCLUDE=-I/usr/gnu/include
 .endd

+.cindex "pkg-config" "GnuTLS"
+If you have &'pkg-config'& available, then instead you can just use:
+.code
+SUPPORT_TLS=yes
+USE_GNUTLS=yes
+USE_GNUTLS_PC=gnutls
+.endd
+

 You do not need to set TLS_INCLUDE if the relevant directory is already
 specified in INCLUDE. Details of how to configure Exim to make use of TLS are
 given in chapter &<<CHAPTLS>>&.
 You do not need to set TLS_INCLUDE if the relevant directory is already
 specified in INCLUDE. Details of how to configure Exim to make use of TLS are
 given in chapter &<<CHAPTLS>>&.


@@ -2110,6 +2127,26 @@ files or libraries are required. When a lookup type is not included in the
 binary, attempts to configure Exim to use it cause run time configuration
 errors.
 
 binary, attempts to configure Exim to use it cause run time configuration
 errors.
 

+.cindex "pkg-config" "lookups"
+.cindex "pkg-config" "authenticators"
+Many systems now use a tool called &'pkg-config'& to encapsulate information
+about how to compile against a library; Exim has some initial support for
+being able to use pkg-config for lookups and authenticators.  For any given
+makefile variable which starts &`LOOKUP_`& or &`AUTH_`&, you can add a new
+variable with the &`_PC`& suffix in the name and assign as the value the
+name of the package to be queried.  The results of querying via the
+&'pkg-config'& command will be added to the appropriate Makefile variables
+with &`+=`& directives, so your version of &'make'& will need to support that
+syntax.  For instance:
+.code
+LOOKUP_SQLITE=yes
+LOOKUP_SQLITE_PC=sqlite3
+AUTH_GSASL=yes
+AUTH_GSASL_PC=libgsasl
+AUTH_HEIMDAL_GSSAPI=yes
+AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi
+.endd
+

 .cindex "Perl" "including support for"
 Exim can be linked with an embedded Perl interpreter, allowing Perl
 subroutines to be called during string expansion. To enable this facility,
 .cindex "Perl" "including support for"
 Exim can be linked with an embedded Perl interpreter, allowing Perl
 subroutines to be called during string expansion. To enable this facility,


@@ -2900,6 +2937,34 @@ use the &'exim_dbmbuild'& utility, or some other means, to rebuild alias files
 if this is required. If the &%bi_command%& option is not set, calling Exim with
 &%-bi%& is a no-op.
 
 if this is required. If the &%bi_command%& option is not set, calling Exim with
 &%-bi%& is a no-op.
 

+.new
+. // Keep :help first, then the rest in alphabetical order
+.vitem &%-bI:help%&
+.oindex "&%-bI:help%&"
+.cindex "querying exim information"
+We shall provide various options starting &`-bI:`& for querying Exim for
+information.  The output of many of these will be intended for machine
+consumption.  This one is not.  The &%-bI:help%& option asks Exim for a
+synopsis of supported options beginning &`-bI:`&.  Use of any of these
+options shall cause Exim to exit after producing the requested output.
+
+.vitem &%-bI:dscp%&
+.oindex "&%-bI:dscp%&"
+.cindex "DSCP" "values"
+This option causes Exim to emit an alphabetically sorted list of all
+recognised DSCP names.
+
+.vitem &%-bI:sieve%&
+.oindex "&%-bI:sieve%&"
+.cindex "Sieve filter" "capabilities"
+This option causes Exim to emit an alphabetically sorted list of all supported
+Sieve protocol extensions on stdout, one per line.  This is anticipated to be
+useful for ManageSieve (RFC 5804) implementations, in providing that protocol's
+&`SIEVE`& capability response line.  As the precise list may depend upon
+compile-time build options, which this option will adapt to, this is the only
+way to guarantee a correct response.
+.wen
+

 .vitem &%-bm%&
 .oindex "&%-bm%&"
 .cindex "local message reception"
 .vitem &%-bm%&
 .oindex "&%-bm%&"
 .cindex "local message reception"


@@ -2946,6 +3011,26 @@ The specified sender is treated as if it were given as the argument to the
 preference to the address taken from the message. The caller of Exim must be a
 trusted user for the sender of a message to be set in this way.
 
 preference to the address taken from the message. The caller of Exim must be a
 trusted user for the sender of a message to be set in this way.
 

+.vitem &%-bmalware%&&~<&'filename'&>
+.oindex "&%-bmalware%&"
+.cindex "testing", "malware"
+.cindex "malware scan test"
+This debugging option causes Exim to scan the given file,
+using the malware scanning framework.  The option of &%av_scanner%& influences
+this option, so if &%av_scanner%&'s value is dependent upon an expansion then
+the expansion should have defaults which apply to this invocation.  ACLs are
+not invoked, so if &%av_scanner%& references an ACL variable then that variable
+will never be populated and &%-bmalware%& will fail.
+
+Exim will have changed working directory before resolving the filename, so
+using fully qualified pathnames is advisable.  Exim will be running as the Exim
+user when it tries to open the file, rather than as the invoking user.
+This option requires admin privileges.
+
+The &%-bmalware%& option will not be extended to be more generally useful,
+there are better tools for file-scanning.  This option exists to help
+administrators verify their Exim and AV scanner configuration.
+

 .vitem &%-bnq%&
 .oindex "&%-bnq%&"
 .cindex "address qualification, suppressing"
 .vitem &%-bnq%&
 .oindex "&%-bnq%&"
 .cindex "address qualification, suppressing"


@@ -2993,6 +3078,12 @@ configuration file is output.
 If a list of configuration files was supplied, the value that is output here
 is the name of the file that was actually used.
 
 If a list of configuration files was supplied, the value that is output here
 is the name of the file that was actually used.
 

+.new
+.cindex "options" "hiding name of"
+If the &%-n%& flag is given, then for most modes of &%-bP%& operation the
+name will not be output.
+.wen
+

 .cindex "daemon" "process id (pid)"
 .cindex "pid (process id)" "of daemon"
 If &%log_file_path%& or &%pid_file_path%& are given, the names of the
 .cindex "daemon" "process id (pid)"
 .cindex "pid (process id)" "of daemon"
 If &%log_file_path%& or &%pid_file_path%& are given, the names of the


@@ -3206,26 +3297,6 @@ above concerning senders and qualification do not apply. In this situation,
 Exim behaves in exactly the same way as it does when receiving a message via
 the listening daemon.
 
 Exim behaves in exactly the same way as it does when receiving a message via
 the listening daemon.
 

-.vitem &%-bmalware%&&~<&'filename'&>
-.oindex "&%-bmalware%&"
-.cindex "testing", "malware"
-.cindex "malware scan test"
-This debugging option causes Exim to scan the given file,
-using the malware scanning framework.  The option of &%av_scanner%& influences
-this option, so if &%av_scanner%&'s value is dependent upon an expansion then
-the expansion should have defaults which apply to this invocation.  ACLs are
-not invoked, so if &%av_scanner%& references an ACL variable then that variable
-will never be populated and &%-bmalware%& will fail.
-
-Exim will have changed working directory before resolving the filename, so
-using fully qualified pathnames is advisable.  Exim will be running as the Exim
-user when it tries to open the file, rather than as the invoking user.
-This option requires admin privileges.
-
-The &%-bmalware%& option will not be extended to be more generally useful,
-there are better tools for file-scanning.  This option exists to help
-administrators verify their Exim and AV scanner configuration.
-

 .vitem &%-bt%&
 .oindex "&%-bt%&"
 .cindex "testing" "addresses"
 .vitem &%-bt%&
 .oindex "&%-bt%&"
 .cindex "testing" "addresses"


@@ -3346,6 +3417,23 @@ This option acts like &%-bv%&, but verifies the address as a sender rather
 than a recipient address. This affects any rewriting and qualification that
 might happen.
 
 than a recipient address. This affects any rewriting and qualification that
 might happen.
 

+.vitem &%-bw%&
+.oindex "&%-bw%&"
+.cindex "daemon"
+.cindex "inetd"
+.cindex "inetd" "wait mode"
+This option runs Exim as a daemon, awaiting incoming SMTP connections,
+similarly to the &%-bd%& option.  All port specifications on the command-line
+and in the configuration file are ignored.  Queue-running may not be specified.
+
+In this mode, Exim expects to be passed a socket as fd 0 (stdin) which is
+listening for connections.  This permits the system to start up and have
+inetd (or equivalent) listen on the SMTP ports, starting an Exim daemon for
+each port only when the first connection is received.
+
+If the option is given as &%-bw%&<&'time'&> then the time is a timeout, after
+which the daemon will exit, which should cause inetd to listen once more.
+

 .vitem &%-C%&&~<&'filelist'&>
 .oindex "&%-C%&"
 .cindex "configuration file" "alternate"
 .vitem &%-C%&&~<&'filelist'&>
 .oindex "&%-C%&"
 .cindex "configuration file" "alternate"


@@ -3857,9 +3945,9 @@ for that message.
 
 .vitem &%-n%&
 .oindex "&%-n%&"
 
 .vitem &%-n%&
 .oindex "&%-n%&"

-.cindex "Sendmail compatibility" "&%-n%& option ignored"
-This option is interpreted by Sendmail to mean &"no aliasing"&. It is ignored
-by Exim.
+This option is interpreted by Sendmail to mean &"no aliasing"&.
+For normal modes of operation, it is ignored by Exim.
+When combined with &%-bP%& it suppresses the name of an option from being output.

 
 .vitem &%-O%&&~<&'data'&>
 .oindex "&%-O%&"
 
 .vitem &%-O%&&~<&'data'&>
 .oindex "&%-O%&"


@@ -5964,16 +6052,16 @@ that it implements the details of the specific authentication mechanism,
 i.e. PLAIN or LOGIN. The &%server_advertise_condition%& setting controls
 when Exim offers authentication to clients; in the examples, this is only
 when TLS or SSL has been started, so to enable the authenticators you also
 i.e. PLAIN or LOGIN. The &%server_advertise_condition%& setting controls
 when Exim offers authentication to clients; in the examples, this is only
 when TLS or SSL has been started, so to enable the authenticators you also

-need to add support for TLS as described in &<<SECTdefconfmain>>&.
+need to add support for TLS as described in section &<<SECTdefconfmain>>&.

 
 The &%server_condition%& setting defines how to verify that the username and
 password are correct. In the examples it just produces an error message.
 To make the authenticators work, you can use a string expansion
 
 The &%server_condition%& setting defines how to verify that the username and
 password are correct. In the examples it just produces an error message.
 To make the authenticators work, you can use a string expansion

-expression like one of the examples in &<<CHAPplaintext>>&.
+expression like one of the examples in chapter &<<CHAPplaintext>>&.

 
 Beware that the sequence of the parameters to PLAIN and LOGIN differ; the
 
 Beware that the sequence of the parameters to PLAIN and LOGIN differ; the

-usercode and password are in different positions.  &<<CHAPplaintext>>&
-covers both.
+usercode and password are in different positions.
+Chapter &<<CHAPplaintext>>& covers both.

 
 .ecindex IIDconfiwal
 
 
 .ecindex IIDconfiwal
 


@@ -6184,12 +6272,23 @@ the DB_UNKNOWN option. This enables it to handle any of the types of database
 that the library supports, and can be useful for accessing DBM files created by
 other applications. (For earlier DB versions, DB_HASH is always used.)
 .next
 that the library supports, and can be useful for accessing DBM files created by
 other applications. (For earlier DB versions, DB_HASH is always used.)
 .next

+.cindex "lookup" "dbmjz"
+.cindex "lookup" "dbm &-- embedded NULs"
+.cindex "sasldb2"
+.cindex "dbmjz lookup type"
+&(dbmjz)&: This is the same as &(dbm)&, except that the lookup key is
+interpreted as an Exim list; the elements of the list are joined together with
+ASCII NUL characters to form the lookup key.  An example usage would be to
+authenticate incoming SMTP calls using the passwords from Cyrus SASL's
+&_/etc/sasldb2_& file with the &(gsasl)& authenticator or Exim's own
+&(cram_md5)& authenticator.
+.next

 .cindex "lookup" "dbmnz"
 .cindex "lookup" "dbm &-- terminating zero"
 .cindex "binary zero" "in lookup key"
 .cindex "Courier"
 .cindex "&_/etc/userdbshadow.dat_&"
 .cindex "lookup" "dbmnz"
 .cindex "lookup" "dbm &-- terminating zero"
 .cindex "binary zero" "in lookup key"
 .cindex "Courier"
 .cindex "&_/etc/userdbshadow.dat_&"

-.cindex "dmbnz lookup type"
+.cindex "dbmnz lookup type"

 &(dbmnz)&: This is the same as &(dbm)&, except that a terminating binary zero
 is not included in the key that is passed to the DBM library. You may need this
 if you want to look up data in files that are created by or shared with some
 &(dbmnz)&: This is the same as &(dbm)&, except that a terminating binary zero
 is not included in the key that is passed to the DBM library. You may need this
 if you want to look up data in files that are created by or shared with some


@@ -6681,8 +6780,8 @@ is used on its own as the result. If the lookup does not succeed, the
 &`fail`& keyword causes a &'forced expansion failure'& &-- see section
 &<<SECTforexpfai>>& for an explanation of what this means.
 
 &`fail`& keyword causes a &'forced expansion failure'& &-- see section
 &<<SECTforexpfai>>& for an explanation of what this means.
 

-The supported DNS record types are A, CNAME, MX, NS, PTR, SRV, and TXT, and,
-when Exim is compiled with IPv6 support, AAAA (and A6 if that is also
+The supported DNS record types are A, CNAME, MX, NS, PTR, SPF, SRV, and TXT,
+and, when Exim is compiled with IPv6 support, AAAA (and A6 if that is also

 configured). If no type is given, TXT is assumed. When the type is PTR,
 the data can be an IP address, written as normal; inversion and the addition of
 &%in-addr.arpa%& or &%ip6.arpa%& happens automatically. For example:
 configured). If no type is given, TXT is assumed. When the type is PTR,
 the data can be an IP address, written as normal; inversion and the addition of
 &%in-addr.arpa%& or &%ip6.arpa%& happens automatically. For example:


@@ -6711,13 +6810,16 @@ It is permitted to specify a space as the separator character. Further
 white space is ignored.
 
 .cindex "TXT record" "in &(dnsdb)& lookup"
 white space is ignored.
 
 .cindex "TXT record" "in &(dnsdb)& lookup"

+.cindex "SPF record" "in &(dnsdb)& lookup"

 For TXT records with multiple items of data, only the first item is returned,
 unless a separator for them is specified using a comma after the separator
 character followed immediately by the TXT record item separator. To concatenate
 For TXT records with multiple items of data, only the first item is returned,
 unless a separator for them is specified using a comma after the separator
 character followed immediately by the TXT record item separator. To concatenate

-items without a separator, use a semicolon instead.
+items without a separator, use a semicolon instead. For SPF records the
+default behaviour is to concatenate multiple items without using a separator.

 .code
 ${lookup dnsdb{>\n,: txt=a.b.example}}
 ${lookup dnsdb{>\n; txt=a.b.example}}
 .code
 ${lookup dnsdb{>\n,: txt=a.b.example}}
 ${lookup dnsdb{>\n; txt=a.b.example}}

+${lookup dnsdb{spf=example.org}}

 .endd
 It is permitted to specify a space as the separator character. Further
 white space is ignored.
 .endd
 It is permitted to specify a space as the separator character. Further
 white space is ignored.


@@ -8483,6 +8585,13 @@ start of a portion of the string that is interpreted and replaced as described
 below in section &<<SECTexpansionitems>>& onwards. Backslash is used as an
 escape character, as described in the following section.
 
 below in section &<<SECTexpansionitems>>& onwards. Backslash is used as an
 escape character, as described in the following section.
 

+Whether a string is expanded depends upon the context.  Usually this is solely
+dependent upon the option for which a value is sought; in this documentation,
+options for which string expansion is performed are marked with &dagger; after
+the data type.  ACL rules always expand strings.  A couple of expansion
+conditions do not expand some of the brace-delimited branches, for security
+reasons.
+

 
 
 .section "Literal text in expanded strings" "SECTlittext"
 
 
 .section "Literal text in expanded strings" "SECTlittext"


@@ -9462,9 +9571,10 @@ decimal, even if they start with a leading zero; hexadecimal numbers are not
 permitted. This can be useful when processing numbers extracted from dates or
 times, which often do have leading zeros.
 
 permitted. This can be useful when processing numbers extracted from dates or
 times, which often do have leading zeros.
 

-A number may be followed by &"K"& or &"M"& to multiply it by 1024 or 1024*1024,
+A number may be followed by &"K"&, &"M"& or &"G"& to multiply it by 1024, 1024*1024
+or 1024*1024*1024,

 respectively. Negative numbers are supported. The result of the computation is
 respectively. Negative numbers are supported. The result of the computation is

-a decimal representation of the answer (without &"K"& or &"M"&). For example:
+a decimal representation of the answer (without &"K"&, &"M"& or &"G"&). For example:

 
 .display
 &`${eval:1+1}            `&  yields 2
 
 .display
 &`${eval:1+1}            `&  yields 2


@@ -9683,6 +9793,8 @@ This operator returns a somewhat random number which is less than the
 supplied number and is at least 0.  The quality of this randomness depends
 on how Exim was built; the values are not suitable for keying material.
 If Exim is linked against OpenSSL then RAND_pseudo_bytes() is used.
 supplied number and is at least 0.  The quality of this randomness depends
 on how Exim was built; the values are not suitable for keying material.
 If Exim is linked against OpenSSL then RAND_pseudo_bytes() is used.

+If Exim is linked against GnuTLS then gnutls_rnd(GNUTLS_RND_NONCE) is used,
+for versions of GnuTLS with that function.

 Otherwise, the implementation may be arc4random(), random() seeded by
 srandomdev() or srandom(), or a custom implementation even weaker than
 random().
 Otherwise, the implementation may be arc4random(), random() seeded by
 srandomdev() or srandom(), or a custom implementation even weaker than
 random().


@@ -9695,11 +9807,13 @@ dotted-quad decimal form, while for IPv6 addreses the result is in
 dotted-nibble hexadecimal form.  In both cases, this is the "natural" form
 for DNS.  For example,
 .code
 dotted-nibble hexadecimal form.  In both cases, this is the "natural" form
 for DNS.  For example,
 .code

-${reverse_ip:192.0.2.4} and ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
+${reverse_ip:192.0.2.4}
+${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}

 .endd
 returns
 .code
 .endd
 returns
 .code

-4.2.0.192 and 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
+4.2.0.192
+3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2

 .endd
 
 
 .endd
 
 


@@ -9864,6 +9978,10 @@ lower case), signifying multiplication by 1024 or 1024*1024, respectively.
 As a special case, the numerical value of an empty string is taken as
 zero.
 
 As a special case, the numerical value of an empty string is taken as
 zero.
 

+In all cases, a relative comparator OP is testing if <&'string1'&> OP
+<&'string2'&>; the above example is checking if &$message_size$& is larger than
+10M, not if 10M is larger than &$message_size$&.
+

 
 .vitem &*bool&~{*&<&'string'&>&*}*&
 .cindex "expansion" "boolean parsing"
 
 .vitem &*bool&~{*&<&'string'&>&*}*&
 .cindex "expansion" "boolean parsing"


@@ -10082,7 +10200,6 @@ string is lexically greater than the second string. For &%gt%& the comparison
 includes the case of letters, whereas for &%gti%& the comparison is
 case-independent.
 
 includes the case of letters, whereas for &%gti%& the comparison is
 case-independent.
 

-.new

 .vitem &*inlist&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
        &*inlisti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "string" "comparison"
 .vitem &*inlist&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
        &*inlisti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "string" "comparison"


@@ -10099,7 +10216,6 @@ ${if inlist{needle}{foo:needle:bar}}
 ${if inlisti{Needle}{fOo:NeeDLE:bAr}}
   ${if forany{fOo:NeeDLE:bAr}{eqi{$item}{Needle}}}
 .endd
 ${if inlisti{Needle}{fOo:NeeDLE:bAr}}
   ${if forany{fOo:NeeDLE:bAr}{eqi{$item}{Needle}}}
 .endd

-.wen

 
 .vitem &*isip&~{*&<&'string'&>&*}*&  &&&
        &*isip4&~{*&<&'string'&>&*}*& &&&
 
 .vitem &*isip&~{*&<&'string'&>&*}*&  &&&
        &*isip4&~{*&<&'string'&>&*}*& &&&


@@ -10211,12 +10327,10 @@ See &*match_local_part*&.
 
 .vitem &*match_ip&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "&%match_ip%& expansion condition"
 
 .vitem &*match_ip&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "&%match_ip%& expansion condition"

-.new

 This condition matches an IP address to a list of IP address patterns. It must
 be followed by two argument strings. The first (after expansion) must be an IP
 address or an empty string. The second (not expanded) is a restricted host
 list that can match only an IP address, not a host name. For example:
 This condition matches an IP address to a list of IP address patterns. It must
 be followed by two argument strings. The first (after expansion) must be an IP
 address or an empty string. The second (not expanded) is a restricted host
 list that can match only an IP address, not a host name. For example:

-.wen

 .code
 ${if match_ip{$sender_host_address}{1.2.3.4:5.6.7.8}{...}{...}}
 .endd
 .code
 ${if match_ip{$sender_host_address}{1.2.3.4:5.6.7.8}{...}{...}}
 .endd


@@ -10262,10 +10376,8 @@ just as easy to use the fact that a lookup is itself a condition, and write:
 .endd
 .endlist ilist
 
 .endd
 .endlist ilist
 

-.new

 Note that <&'string2'&> is not itself subject to string expansion, unless
 Exim was built with the EXPAND_LISTMATCH_RHS option.
 Note that <&'string2'&> is not itself subject to string expansion, unless
 Exim was built with the EXPAND_LISTMATCH_RHS option.

-.wen

 
 Consult section &<<SECThoslispatip>>& for further details of these patterns.
 
 
 Consult section &<<SECThoslispatip>>& for further details of these patterns.
 


@@ -10294,10 +10406,8 @@ item can be used, as in all address lists, to cause subsequent items to
 have their local parts matched casefully. Domains are always matched
 caselessly.
 
 have their local parts matched casefully. Domains are always matched
 caselessly.
 

-.new

 Note that <&'string2'&> is not itself subject to string expansion, unless
 Exim was built with the EXPAND_LISTMATCH_RHS option.
 Note that <&'string2'&> is not itself subject to string expansion, unless
 Exim was built with the EXPAND_LISTMATCH_RHS option.

-.wen

 
 &*Note*&: Host lists are &'not'& supported in this way. This is because
 hosts have two identities: a name and an IP address, and it is not clear
 
 &*Note*&: Host lists are &'not'& supported in this way. This is because
 hosts have two identities: a name and an IP address, and it is not clear


@@ -10644,14 +10754,12 @@ is empty and &$authentication_failed$& is set to &"1"&). Failure includes any
 negative response to an AUTH command, including (for example) an attempt to use
 an undefined mechanism.
 
 negative response to an AUTH command, including (for example) an attempt to use
 an undefined mechanism.
 

-.new

 .vitem &$av_failed$&
 .cindex "content scanning" "AV scanner failure"
 This variable is available when Exim is compiled with the content-scanning
 extension. It is set to &"0"& by default, but will be set to &"1"& if any
 problem occurs with the virus scanner (specified by &%av_scanner%&) during
 the ACL malware condition.
 .vitem &$av_failed$&
 .cindex "content scanning" "AV scanner failure"
 This variable is available when Exim is compiled with the content-scanning
 extension. It is set to &"0"& by default, but will be set to &"1"& if any
 problem occurs with the virus scanner (specified by &%av_scanner%&) during
 the ACL malware condition.

-.wen

 
 .vitem &$body_linecount$&
 .cindex "message body" "line count"
 
 .vitem &$body_linecount$&
 .cindex "message body" "line count"


@@ -11586,6 +11694,31 @@ driver that successfully authenticated the client from which the message was
 received. It is empty if there was no successful authentication. See also
 &$authenticated_id$&.
 
 received. It is empty if there was no successful authentication. See also
 &$authenticated_id$&.
 

+.new
+.vitem &$sender_host_dnssec$&
+.vindex "&$sender_host_dnssec$&"
+If &$sender_host_name$& has been populated (by reference, &%hosts_lookup%& or
+otherwise) then this boolean will have been set true if, and only if, the
+resolver library states that the reverse DNS was authenticated data.  At all
+other times, this variable is false.
+
+It is likely that you will need to coerce DNSSEC support on in the resolver
+library, by setting:
+.code
+dns_use_dnssec = 1
+.endd
+
+Exim does not perform DNSSEC validation itself, instead leaving that to a
+validating resolver (eg, unbound, or bind with suitable configuration).
+
+Exim does not (currently) check to see if the forward DNS was also secured
+with DNSSEC, only the reverse DNS.
+
+If you have changed &%host_lookup_order%& so that &`bydns`& is not the first
+mechanism in the list, then this variable will be false.
+.wen
+
+

 .vitem &$sender_host_name$&
 .vindex "&$sender_host_name$&"
 When a message is received from a remote host, this variable contains the
 .vitem &$sender_host_name$&
 .vindex "&$sender_host_name$&"
 When a message is received from a remote host, this variable contains the


@@ -11784,6 +11917,14 @@ command in a filter file. Its use is explained in the description of that
 command, which can be found in the separate document entitled &'Exim's
 interfaces to mail filtering'&.
 
 command, which can be found in the separate document entitled &'Exim's
 interfaces to mail filtering'&.
 

+.vitem &$tls_bits$&
+.vindex "&$tls_bits$&"
+Contains an approximation of the TLS cipher's bit-strength; the meaning of
+this depends upon the TLS implementation used.
+If TLS has not been negotiated, the value will be 0.
+The value of this is automatically fed into the Cyrus SASL authenticator
+when acting as a server, to specify the "external SSF" (a SASL term).
+

 .vitem &$tls_certificate_verified$&
 .vindex "&$tls_certificate_verified$&"
 This variable is set to &"1"& if a TLS certificate was verified when the
 .vitem &$tls_certificate_verified$&
 .vindex "&$tls_certificate_verified$&"
 This variable is set to &"1"& if a TLS certificate was verified when the


@@ -11814,6 +11955,21 @@ the value of the Distinguished Name of the certificate is made available in the
 value is retained during message delivery, except during outbound SMTP
 deliveries.
 
 value is retained during message delivery, except during outbound SMTP
 deliveries.
 

+.vitem &$tls_sni$&
+.vindex "&$tls_sni$&"
+.cindex "TLS" "Server Name Indication"
+When a TLS session is being established, if the client sends the Server
+Name Indication extension, the value will be placed in this variable.
+If the variable appears in &%tls_certificate%& then this option and
+some others, described in &<<SECTtlssni>>&,
+will be re-expanded early in the TLS session, to permit
+a different certificate to be presented (and optionally a different key to be
+used) to the client, based upon the value of the SNI extension.
+
+The value will be retained for the lifetime of the message.  During outbound
+SMTP deliveries, it reflects the value of the &%tls_sni%& option on
+the transport.
+

 .vitem &$tod_bsdinbox$&
 .vindex "&$tod_bsdinbox$&"
 The time of day and the date, in the format required for BSD-style mailbox
 .vitem &$tod_bsdinbox$&
 .vindex "&$tod_bsdinbox$&"
 The time of day and the date, in the format required for BSD-style mailbox


@@ -11823,6 +11979,10 @@ files, for example: Thu Oct 17 17:14:09 1995.
 .vindex "&$tod_epoch$&"
 The time and date as a number of seconds since the start of the Unix epoch.
 
 .vindex "&$tod_epoch$&"
 The time and date as a number of seconds since the start of the Unix epoch.
 

+.vitem &$tod_epoch_l$&
+.vindex "&$tod_epoch_l$&"
+The time and date as a number of microseconds since the start of the Unix epoch.
+

 .vitem &$tod_full$&
 .vindex "&$tod_full$&"
 A full version of the time and date, for example: Wed, 16 Oct 1995 09:51:40
 .vitem &$tod_full$&
 .vindex "&$tod_full$&"
 A full version of the time and date, for example: Wed, 16 Oct 1995 09:51:40


@@ -12558,14 +12718,12 @@ listed in more than one group.
 
 .section "TLS" "SECID108"
 .table2
 
 .section "TLS" "SECID108"
 .table2

-.row &%gnutls_require_kx%&           "control GnuTLS key exchanges"
-.row &%gnutls_require_mac%&          "control GnuTLS MAC algorithms"
-.row &%gnutls_require_protocols%&    "control GnuTLS protocols"

 .row &%gnutls_compat_mode%&          "use GnuTLS compatibility mode"
 .row &%openssl_options%&             "adjust OpenSSL compatibility options"
 .row &%tls_advertise_hosts%&         "advertise TLS to these hosts"
 .row &%tls_certificate%&             "location of server certificate"
 .row &%tls_crl%&                     "certificate revocation list"
 .row &%gnutls_compat_mode%&          "use GnuTLS compatibility mode"
 .row &%openssl_options%&             "adjust OpenSSL compatibility options"
 .row &%tls_advertise_hosts%&         "advertise TLS to these hosts"
 .row &%tls_certificate%&             "location of server certificate"
 .row &%tls_crl%&                     "certificate revocation list"

+.row &%tls_dh_max_bits%&             "clamp D-H bit count suggestion"

 .row &%tls_dhparam%&                 "DH parameters for server"
 .row &%tls_on_connect_ports%&        "specify SSMTP (SMTPS) ports"
 .row &%tls_privatekey%&              "location of server private key"
 .row &%tls_dhparam%&                 "DH parameters for server"
 .row &%tls_on_connect_ports%&        "specify SSMTP (SMTPS) ports"
 .row &%tls_privatekey%&              "location of server private key"


@@ -12710,6 +12868,9 @@ See also the &'Policy controls'& section above.
 .row &%dns_ipv4_lookup%&             "only v4 lookup for these domains"
 .row &%dns_retrans%&                 "parameter for resolver"
 .row &%dns_retry%&                   "parameter for resolver"
 .row &%dns_ipv4_lookup%&             "only v4 lookup for these domains"
 .row &%dns_retrans%&                 "parameter for resolver"
 .row &%dns_retry%&                   "parameter for resolver"

+.new
+.row &%dns_use_dnssec%&              "parameter for resolver"
+.wen

 .row &%dns_use_edns0%&               "parameter for resolver"
 .row &%hold_domains%&                "hold delivery for these domains"
 .row &%local_interfaces%&            "for routing checks"
 .row &%dns_use_edns0%&               "parameter for resolver"
 .row &%hold_domains%&                "hold delivery for these domains"
 .row &%local_interfaces%&            "for routing checks"


@@ -12754,14 +12915,21 @@ See also the &'Policy controls'& section above.
 Those options that undergo string expansion before use are marked with
 &dagger;.
 
 Those options that undergo string expansion before use are marked with
 &dagger;.
 

-.option accept_8bitmime main boolean false
+.option accept_8bitmime main boolean true

 .cindex "8BITMIME"
 .cindex "8-bit characters"
 This option causes Exim to send 8BITMIME in its response to an SMTP
 EHLO command, and to accept the BODY= parameter on MAIL commands.
 However, though Exim is 8-bit clean, it is not a protocol converter, and it
 takes no steps to do anything special with messages received by this route.
 .cindex "8BITMIME"
 .cindex "8-bit characters"
 This option causes Exim to send 8BITMIME in its response to an SMTP
 EHLO command, and to accept the BODY= parameter on MAIL commands.
 However, though Exim is 8-bit clean, it is not a protocol converter, and it
 takes no steps to do anything special with messages received by this route.

-Consequently, this option is turned off by default.
+
+Historically Exim kept this option off by default, but the maintainers
+feel that in today's Internet, this causes more problems than it solves.
+It now defaults to true.
+A more detailed analysis of the issues is provided by Dan Bernstein:
+.display
+&url(http://cr.yp.to/smtp/8bitmime.html)
+.endd

 
 .option acl_not_smtp main string&!! unset
 .cindex "&ACL;" "for non-SMTP messages"
 
 .option acl_not_smtp main string&!! unset
 .cindex "&ACL;" "for non-SMTP messages"


@@ -13344,6 +13512,17 @@ See &%dns_retrans%& above.
 
 
 .new
 
 
 .new

+.option dns_use_dnssec main integer -1
+.cindex "DNS" "resolver options"
+.cindex "DNS" "DNSSEC"
+If this option is set to a non-negative number then Exim will initialise the
+DNS resolver library to either use or not use DNSSEC, overriding the system
+default. A value of 0 coerces DNSSEC off, a value of 1 coerces DNSSEC on.
+
+If the resolver library does not support DNSSEC then this option has no effect.
+.wen
+
+

 .option dns_use_edns0 main integer -1
 .cindex "DNS" "resolver options"
 .cindex "DNS" "EDNS0"
 .option dns_use_edns0 main integer -1
 .cindex "DNS" "resolver options"
 .cindex "DNS" "EDNS0"


@@ -13353,7 +13532,6 @@ the system default. A value of 0 coerces EDNS0 off, a value of 1 coerces EDNS0
 on.
 
 If the resolver library does not support EDNS0 then this option has no effect.
 on.
 
 If the resolver library does not support EDNS0 then this option has no effect.

-.wen

 
 
 .option drop_cr main boolean false
 
 
 .option drop_cr main boolean false


@@ -13564,18 +13742,6 @@ gecos_name = $1
 See &%gecos_name%& above.
 
 
 See &%gecos_name%& above.
 
 

-.option gnutls_require_kx main string unset
-This option controls the key exchange mechanisms when GnuTLS is used in an Exim
-server. For details, see section &<<SECTreqciphgnu>>&.
-
-.option gnutls_require_mac main string unset
-This option controls the MAC algorithms when GnuTLS is used in an Exim
-server. For details, see section &<<SECTreqciphgnu>>&.
-
-.option gnutls_require_protocols main string unset
-This option controls the protocols when GnuTLS is used in an Exim
-server. For details, see section &<<SECTreqciphgnu>>&.
-

 .option gnutls_compat_mode main boolean unset
 This option controls whether GnuTLS is used in compatibility mode in an Exim
 server. This reduces security slightly, but improves interworking with older
 .option gnutls_compat_mode main boolean unset
 This option controls whether GnuTLS is used in compatibility mode in an Exim
 server. This reduces security slightly, but improves interworking with older


@@ -14259,16 +14425,12 @@ harm. This option overrides the &%pipe_as_creator%& option of the &(pipe)&
 transport driver.
 
 
 transport driver.
 
 

-.option openssl_options main "string list" +dont_insert_empty_fragments
+.option openssl_options main "string list" "+no_sslv2"

 .cindex "OpenSSL "compatibility options"
 This option allows an administrator to adjust the SSL options applied
 by OpenSSL to connections.  It is given as a space-separated list of items,
 .cindex "OpenSSL "compatibility options"
 This option allows an administrator to adjust the SSL options applied
 by OpenSSL to connections.  It is given as a space-separated list of items,

-each one to be +added or -subtracted from the current value.  The default
-value is one option which happens to have been set historically.  You can
-remove all options with:
-.code
-openssl_options = -all
-.endd
+each one to be +added or -subtracted from the current value.
+

 This option is only available if Exim is built against OpenSSL.  The values
 available for this option vary according to the age of your OpenSSL install.
 The &"all"& value controls a subset of flags which are available, typically
 This option is only available if Exim is built against OpenSSL.  The values
 available for this option vary according to the age of your OpenSSL install.
 The &"all"& value controls a subset of flags which are available, typically


@@ -14280,14 +14442,76 @@ names lose the leading &"SSL_OP_"& and are lower-cased.
 Note that adjusting the options can have severe impact upon the security of
 SSL as used by Exim.  It is possible to disable safety checks and shoot
 yourself in the foot in various unpleasant ways.  This option should not be
 Note that adjusting the options can have severe impact upon the security of
 SSL as used by Exim.  It is possible to disable safety checks and shoot
 yourself in the foot in various unpleasant ways.  This option should not be

-adjusted lightly.  An unrecognised item will be detected at by invoking Exim
-with the &%-bV%& flag.
+adjusted lightly.  An unrecognised item will be detected at startup, by
+invoking Exim with the &%-bV%& flag.
+
+Historical note: prior to release 4.80, Exim defaulted this value to
+"+dont_insert_empty_fragments", which may still be needed for compatibility
+with some clients, but which lowers security by increasing exposure to
+some now infamous attacks.

 
 An example:
 .code
 
 An example:
 .code

-openssl_options = -all +microsoft_big_sslv3_buffer
+# Make both old MS and old Eudora happy:
+openssl_options = -all +microsoft_big_sslv3_buffer \
+                       +dont_insert_empty_fragments

 .endd
 
 .endd
 

+Possible options may include:
+.ilist
+&`all`&
+.next
+&`allow_unsafe_legacy_renegotiation`&
+.next
+&`cipher_server_preference`&
+.next
+&`dont_insert_empty_fragments`&
+.next
+&`ephemeral_rsa`&
+.next
+&`legacy_server_connect`&
+.next
+&`microsoft_big_sslv3_buffer`&
+.next
+&`microsoft_sess_id_bug`&
+.next
+&`msie_sslv2_rsa_padding`&
+.next
+&`netscape_challenge_bug`&
+.next
+&`netscape_reuse_cipher_change_bug`&
+.next
+&`no_compression`&
+.next
+&`no_session_resumption_on_renegotiation`&
+.next
+&`no_sslv2`&
+.next
+&`no_sslv3`&
+.next
+&`no_ticket`&
+.next
+&`no_tlsv1`&
+.next
+&`no_tlsv1_1`&
+.next
+&`no_tlsv1_2`&
+.next
+&`single_dh_use`&
+.next
+&`single_ecdh_use`&
+.next
+&`ssleay_080_client_dh_bug`&
+.next
+&`sslref2_reuse_cert_type_bug`&
+.next
+&`tls_block_padding_bug`&
+.next
+&`tls_d5_bug`&
+.next
+&`tls_rollback_bug`&
+.endlist
+

 
 .option oracle_servers main "string list" unset
 .cindex "Oracle" "server list"
 
 .option oracle_servers main "string list" unset
 .cindex "Oracle" "server list"


@@ -15477,6 +15701,10 @@ receiving incoming messages as a server. If you want to supply certificates for
 use when sending messages as a client, you must set the &%tls_certificate%&
 option in the relevant &(smtp)& transport.
 
 use when sending messages as a client, you must set the &%tls_certificate%&
 option in the relevant &(smtp)& transport.
 

+If the option contains &$tls_sni$& and Exim is built against OpenSSL, then
+if the OpenSSL build supports TLS extensions and the TLS client sends the
+Server Name Indication extension, then this option and others documented in
+&<<SECTtlssni>>& will be re-expanded.

 
 .option tls_crl main string&!! unset
 .cindex "TLS" "server certificate revocation list"
 
 .option tls_crl main string&!! unset
 .cindex "TLS" "server certificate revocation list"


@@ -15484,13 +15712,68 @@ option in the relevant &(smtp)& transport.
 This option specifies a certificate revocation list. The expanded value must
 be the name of a file that contains a CRL in PEM format.
 
 This option specifies a certificate revocation list. The expanded value must
 be the name of a file that contains a CRL in PEM format.
 

+See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
+
+
+.option tls_dh_max_bits main integer 2236
+.cindex "TLS" "D-H bit count"
+The number of bits used for Diffie-Hellman key-exchange may be suggested by
+the chosen TLS library.  That value might prove to be too high for
+interoperability.  This option provides a maximum clamp on the value
+suggested, trading off security for interoperability.
+
+The value must be at least 1024.
+
+The value 2236 was chosen because, at time of adding the option, it was the
+hard-coded maximum value supported by the NSS cryptographic library, as used
+by Thunderbird, while GnuTLS was suggesting 2432 bits as normal.
+
+If you prefer more security and are willing to break some clients, raise this
+number.
+
+Note that the value passed to GnuTLS for *generating* a new prime may be a
+little less than this figure, because GnuTLS is inexact and may produce a
+larger prime than requested.
+

 
 .option tls_dhparam main string&!! unset
 .cindex "TLS" "D-H parameters for server"
 
 .option tls_dhparam main string&!! unset
 .cindex "TLS" "D-H parameters for server"

-The value of this option is expanded, and must then be the absolute path to
-a file which contains the server's DH parameter values.
-This is used only for OpenSSL. When Exim is linked with GnuTLS, this option is
-ignored. See section &<<SECTopenvsgnu>>& for further details.
+The value of this option is expanded and indicates the source of DH parameters
+to be used by Exim.
+
+If it is a filename starting with a &`/`&, then it names a file from which DH
+parameters should be loaded.  If the file exists, it should hold a PEM-encoded
+PKCS#3 representation of the DH prime.  If the file does not exist, for
+OpenSSL it is an error.  For GnuTLS, Exim will attempt to create the file and
+fill it with a generated DH prime.  For OpenSSL, if the DH bit-count from
+loading the file is greater than &%tls_dh_max_bits%& then it will be ignored,
+and treated as though the &%tls_dhparam%& were set to "none".
+
+If this option expands to the string "none", then no DH parameters will be
+loaded by Exim.
+
+If this option expands to the string "historic" and Exim is using GnuTLS, then
+Exim will attempt to load a file from inside the spool directory.  If the file
+does not exist, Exim will attempt to create it.
+See section &<<SECTgnutlsparam>>& for further details.
+
+If Exim is using OpenSSL and this option is empty or unset, then Exim will load
+a default DH prime; the default is the 2048 bit prime described in section
+2.2 of RFC 5114, "2048-bit MODP Group with 224-bit Prime Order Subgroup", which
+in IKE is assigned number 23.
+
+Otherwise, the option must expand to the name used by Exim for any of a number
+of DH primes specified in RFC 2409, RFC 3526 and RFC 5114.  As names, Exim uses
+"ike" followed by the number used by IKE, of "default" which corresponds to
+"ike23".
+
+The available primes are:
+&`ike1`&, &`ike2`&, &`ike5`&,
+&`ike14`&, &`ike15`&, &`ike16`&, &`ike17`&, &`ike18`&,
+&`ike22`&, &`ike23`& (aka &`default`&) and &`ike24`&.
+
+Some of these will be too small to be accepted by clients.
+Some may be too large to be accepted by clients.

 
 
 .option tls_on_connect_ports main "string list" unset
 
 
 .option tls_on_connect_ports main "string list" unset


@@ -15509,6 +15792,8 @@ the expansion is forced to fail, or the result is an empty string, the private
 key is assumed to be in the same file as the server's certificates. See chapter
 &<<CHAPTLS>>& for further details.
 
 key is assumed to be in the same file as the server's certificates. See chapter
 &<<CHAPTLS>>& for further details.
 

+See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
+

 
 .option tls_remember_esmtp main boolean false
 .cindex "TLS" "esmtp state; remembering"
 
 .option tls_remember_esmtp main boolean false
 .cindex "TLS" "esmtp state; remembering"


@@ -15555,6 +15840,8 @@ connecting clients, defining the list of accepted certificate authorities.
 Thus the values defined should be considered public data.  To avoid this,
 use OpenSSL with a directory.
 
 Thus the values defined should be considered public data.  To avoid this,
 use OpenSSL with a directory.
 

+See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
+

 
 .option tls_verify_hosts main "host list&!!" unset
 .cindex "TLS" "client certificate verification"
 
 .option tls_verify_hosts main "host list&!!" unset
 .cindex "TLS" "client certificate verification"


@@ -16875,6 +17162,38 @@ look for A or AAAA records, unless the domain matches &%mx_domains%&, in which
 case routing fails.
 
 
 case routing fails.
 
 

+.section "Declining addresses by dnslookup" "SECTdnslookupdecline"
+.cindex "&(dnslookup)& router" "declines"
+There are a few cases where a &(dnslookup)& router will decline to accept
+an address; if such a router is expected to handle "all remaining non-local
+domains", then it is important to set &%no_more%&.
+
+Reasons for a &(dnslookup)& router to decline currently include:
+.ilist
+The domain does not exist in DNS
+.next
+The domain exists but the MX record's host part is just "."; this is a common
+convention (borrowed from SRV) used to indicate that there is no such service
+for this domain and to not fall back to trying A/AAAA records.
+.next
+Ditto, but for SRV records, when &%check_srv%& is set on this router.
+.next
+MX record points to a non-existent host.
+.next
+MX record points to an IP address and the main section option
+&%allow_mx_to_ip%& is not set.
+.next
+MX records exist and point to valid hosts, but all hosts resolve only to
+addresses blocked by the &%ignore_target_hosts%& generic option on this router.
+.next
+The domain is not syntactically valid (see also &%allow_utf8_domains%& and
+&%dns_check_names_pattern%& for handling one variant of this)
+.next
+&%check_secondary_mx%& is set on this router but the local host can
+not be found in the MX records (see below)
+.endlist
+
+

 
 
 .section "Private options for dnslookup" "SECID118"
 
 
 .section "Private options for dnslookup" "SECID118"


@@ -18098,6 +18417,18 @@ quote just the command. An item such as
 .endd
 is interpreted as a pipe with a rather strange command name, and no arguments.
 
 .endd
 is interpreted as a pipe with a rather strange command name, and no arguments.
 

+.new
+Note that the above example assumes that the text comes from a lookup source
+of some sort, so that the quotes are part of the data.  If composing a
+redirect router with a &%data%& option directly specifying this command, the
+quotes will be used by the configuration parser to define the extent of one
+string, but will not be passed down into the redirect router itself.  There
+are two main approaches to get around this: escape quotes to be part of the
+data itself, or avoid using this mechanism and instead create a custom
+transport with the &%command%& option set and reference that transport from
+an &%accept%& router.
+.wen
+

 .next
 .cindex "file" "in redirection list"
 .cindex "address redirection" "to file"
 .next
 .cindex "file" "in redirection list"
 .cindex "address redirection" "to file"


@@ -19993,7 +20324,6 @@ This option applies only to deliveries in maildir format, and is described in
 section &<<SECTmaildirdelivery>>& below.
 
 
 section &<<SECTmaildirdelivery>>& below.
 
 

-.new

 .option maildir_use_size_file appendfile&!! boolean false
 .cindex "maildir format" "&_maildirsize_& file"
 The result of string expansion for this option must be a valid boolean value.
 .option maildir_use_size_file appendfile&!! boolean false
 .cindex "maildir format" "&_maildirsize_& file"
 The result of string expansion for this option must be a valid boolean value.


@@ -20002,7 +20332,6 @@ creates a &_maildirsize_& file in a maildir if one does not exist, taking the
 quota from the &%quota%& option of the transport. If &%quota%& is unset, the
 value is zero. See &%maildir_quota_directory_regex%& above and section
 &<<SECTmaildirdelivery>>& below for further details.
 quota from the &%quota%& option of the transport. If &%quota%& is unset, the
 value is zero. See &%maildir_quota_directory_regex%& above and section
 &<<SECTmaildirdelivery>>& below for further details.

-.wen

 
 .option maildirfolder_create_regex appendfile string unset
 .cindex "maildir format" "&_maildirfolder_& file"
 
 .option maildirfolder_create_regex appendfile string unset
 .cindex "maildir format" "&_maildirfolder_& file"


@@ -21637,12 +21966,15 @@ that are in force when the &%helo_data%&, &%hosts_try_auth%&, &%interface%&,
 
 
 .section "Use of $tls_cipher and $tls_peerdn" "usecippeer"
 
 
 .section "Use of $tls_cipher and $tls_peerdn" "usecippeer"

+.vindex &$tls_bits$&

 .vindex &$tls_cipher$&
 .vindex &$tls_peerdn$&
 .vindex &$tls_cipher$&
 .vindex &$tls_peerdn$&

-At the start of a run of the &(smtp)& transport, the values of &$tls_cipher$&
-and &$tls_peerdn$& are the values that were set when the message was received.
+.vindex &$tls_sni$&
+At the start of a run of the &(smtp)& transport, the values of &$tls_bits$&,
+&$tls_cipher$&, &$tls_peerdn$& and &$tls_sni$&
+are the values that were set when the message was received.

 These are the values that are used for options that are expanded before any
 These are the values that are used for options that are expanded before any

-SMTP connections are made. Just before each connection is made, these two
+SMTP connections are made. Just before each connection is made, these four

 variables are emptied. If TLS is subsequently started, they are set to the
 appropriate values for the outgoing connection, and these are the values that
 are in force when any authenticators are run and when the
 variables are emptied. If TLS is subsequently started, they are set to the
 appropriate values for the outgoing connection, and these are the values that
 are in force when any authenticators are run and when the


@@ -21781,6 +22113,22 @@ See the &%search_parents%& option in chapter &<<CHAPdnslookup>>& for more
 details.
 
 
 details.
 
 

+.new
+.option dscp smtp string&!! unset
+.cindex "DCSP" "outbound"
+This option causes the DSCP value associated with a socket to be set to one
+of a number of fixed strings or to numeric value.
+The &%-bI:dscp%& option may be used to ask Exim which names it knows of.
+Common values include &`throughput`&, &`mincost`&, and on newer systems
+&`ef`&, &`af41`&, etc.  Numeric values may be in the range 0 to 0x3F.
+
+The outbound packets from Exim will be marked with this value in the header
+(for IPv4, the TOS field; for IPv6, the TCLASS field); there is no guarantee
+that these values will have any effect, not be stripped by networking
+equipment, or do much of anything without cooperation with your Network
+Engineer and those of all network operators between the source and destination.
+.wen
+

 
 .option fallback_hosts smtp "string list" unset
 .cindex "fallback" "hosts specified on transport"
 
 .option fallback_hosts smtp "string list" unset
 .cindex "fallback" "hosts specified on transport"


@@ -21828,18 +22176,6 @@ being used, names are looked up using &[gethostbyname()]&
 instead of using the DNS. Of course, that function may in fact use the DNS, but
 it may also consult other sources of information such as &_/etc/hosts_&.
 
 instead of using the DNS. Of course, that function may in fact use the DNS, but
 it may also consult other sources of information such as &_/etc/hosts_&.
 

-.option gnutls_require_kx smtp string unset
-This option controls the key exchange mechanisms when GnuTLS is used in an Exim
-client. For details, see section &<<SECTreqciphgnu>>&.
-
-.option gnutls_require_mac smtp string unset
-This option controls the MAC algorithms when GnuTLS is used in an Exim
-client. For details, see section &<<SECTreqciphgnu>>&.
-
-.option gnutls_require_protocols smtp string unset
-This option controls the protocols when GnuTLS is used in an Exim
-client. For details, see section &<<SECTreqciphgnu>>&.
-

 .option gnutls_compat_mode smtp boolean unset
 This option controls whether GnuTLS is used in compatibility mode in an Exim
 server. This reduces security slightly, but improves interworking with older
 .option gnutls_compat_mode smtp boolean unset
 This option controls whether GnuTLS is used in compatibility mode in an Exim
 server. This reduces security slightly, but improves interworking with older


@@ -22103,12 +22439,10 @@ protocol (RFC 2033) instead of SMTP. This protocol is sometimes used for local
 deliveries into closed message stores. Exim also has support for running LMTP
 over a pipe to a local process &-- see chapter &<<CHAPLMTP>>&.
 
 deliveries into closed message stores. Exim also has support for running LMTP
 over a pipe to a local process &-- see chapter &<<CHAPLMTP>>&.
 

-.new

 If this option is set to &"smtps"&, the default vaule for the &%port%& option
 changes to &"smtps"&, and the transport initiates TLS immediately after
 connecting, as an outbound SSL-on-connect, instead of using STARTTLS to upgrade.
 The Internet standards bodies strongly discourage use of this mode.
 If this option is set to &"smtps"&, the default vaule for the &%port%& option
 changes to &"smtps"&, and the transport initiates TLS immediately after
 connecting, as an outbound SSL-on-connect, instead of using STARTTLS to upgrade.
 The Internet standards bodies strongly discourage use of this mode.

-.wen

 
 
 .option retry_include_ip_address smtp boolean true
 
 
 .option retry_include_ip_address smtp boolean true


@@ -22192,6 +22526,19 @@ This option specifies a certificate revocation list. The expanded value must
 be the name of a file that contains a CRL in PEM format.
 
 
 be the name of a file that contains a CRL in PEM format.
 
 

+.new
+.option tls_dh_min_bits smtp integer 1024
+.cindex "TLS" "Diffie-Hellman minimum acceptable size"
+When establishing a TLS session, if a ciphersuite which uses Diffie-Hellman
+key agreement is negotiated, the server will provide a large prime number
+for use.  This option establishes the minimum acceptable size of that number.
+If the parameter offered by the server is too small, then the TLS handshake
+will fail.
+
+Only supported when using GnuTLS.
+.wen
+
+

 .option tls_privatekey smtp string&!! unset
 .cindex "TLS" "client private key, location of"
 .vindex "&$host$&"
 .option tls_privatekey smtp string&!! unset
 .cindex "TLS" "client private key, location of"
 .vindex "&$host$&"


@@ -22221,6 +22568,22 @@ ciphers is a preference order.
 
 
 
 
 
 

+.option tls_sni smtp string&!! unset
+.cindex "TLS" "Server Name Indication"
+.vindex "&$tls_sni$&"
+If this option is set then it sets the $tls_sni variable and causes any
+TLS session to pass this value as the Server Name Indication extension to
+the remote side, which can be used by the remote side to select an appropriate
+certificate and private key for the session.
+
+See &<<SECTtlssni>>& for more information.
+
+Note that for OpenSSL, this feature requires a build of OpenSSL that supports
+TLS extensions.
+
+
+
+

 .option tls_tempfail_tryclear smtp boolean true
 .cindex "4&'xx'& responses" "to STARTTLS"
 When the server host is not in &%hosts_require_tls%&, and there is a problem in
 .option tls_tempfail_tryclear smtp boolean true
 .cindex "4&'xx'& responses" "to STARTTLS"
 When the server host is not in &%hosts_require_tls%&, and there is a problem in


@@ -23396,18 +23759,15 @@ included by setting
 .code
 AUTH_CRAM_MD5=yes
 AUTH_CYRUS_SASL=yes
 .code
 AUTH_CRAM_MD5=yes
 AUTH_CYRUS_SASL=yes

-.new

 AUTH_DOVECOT=yes
 AUTH_GSASL=yes
 AUTH_HEIMDAL_GSSAPI=yes
 AUTH_DOVECOT=yes
 AUTH_GSASL=yes
 AUTH_HEIMDAL_GSSAPI=yes

-.wen

 AUTH_PLAINTEXT=yes
 AUTH_SPA=yes
 .endd
 in &_Local/Makefile_&, respectively. The first of these supports the CRAM-MD5
 authentication mechanism (RFC 2195), and the second provides an interface to
 the Cyrus SASL authentication library.
 AUTH_PLAINTEXT=yes
 AUTH_SPA=yes
 .endd
 in &_Local/Makefile_&, respectively. The first of these supports the CRAM-MD5
 authentication mechanism (RFC 2195), and the second provides an interface to
 the Cyrus SASL authentication library.

-.new

 The third is an interface to Dovecot's authentication system, delegating the
 work via a socket interface.
 The fourth provides an interface to the GNU SASL authentication library, which
 The third is an interface to Dovecot's authentication system, delegating the
 work via a socket interface.
 The fourth provides an interface to the GNU SASL authentication library, which


@@ -23418,7 +23778,6 @@ The sixth can be configured to support
 the PLAIN authentication mechanism (RFC 2595) or the LOGIN mechanism, which is
 not formally documented, but used by several MUAs. The seventh authenticator
 supports Microsoft's &'Secure Password Authentication'& mechanism.
 the PLAIN authentication mechanism (RFC 2595) or the LOGIN mechanism, which is
 not formally documented, but used by several MUAs. The seventh authenticator
 supports Microsoft's &'Secure Password Authentication'& mechanism.

-.wen

 
 The authenticators are configured using the same syntax as other drivers (see
 section &<<SECTfordricon>>&). If no authenticators are required, no
 
 The authenticators are configured using the same syntax as other drivers (see
 section &<<SECTfordricon>>&). If no authenticators are required, no


@@ -23450,7 +23809,6 @@ The remainder of this chapter covers the generic options for the
 authenticators, followed by general discussion of the way authentication works
 in Exim.
 
 authenticators, followed by general discussion of the way authentication works
 in Exim.
 

-.new

 &*Beware:*& the meaning of &$auth1$&, &$auth2$&, ... varies on a per-driver and
 per-mechanism basis.  Please read carefully to determine which variables hold
 account labels such as usercodes and which hold passwords or other
 &*Beware:*& the meaning of &$auth1$&, &$auth2$&, ... varies on a per-driver and
 per-mechanism basis.  Please read carefully to determine which variables hold
 account labels such as usercodes and which hold passwords or other


@@ -23472,7 +23830,6 @@ A &'realm'& is a text string, typically a domain name, presented by a server
 to a client to help it select an account and credentials to use.  In some
 mechanisms, the client and server provably agree on the realm, but clients
 typically can not treat the realm as secure data to be blindly trusted.
 to a client to help it select an account and credentials to use.  In some
 mechanisms, the client and server provably agree on the realm, but clients
 typically can not treat the realm as secure data to be blindly trusted.

-.wen

 
 
 
 
 
 


@@ -23520,10 +23877,8 @@ This option must be set for a &%plaintext%& server authenticator, where it
 is used directly to control authentication. See section &<<SECTplainserver>>&
 for details.
 
 is used directly to control authentication. See section &<<SECTplainserver>>&
 for details.
 

-.new

 For the &(gsasl)& authenticator, this option is required for various
 mechanisms; see chapter &<<CHAPgsasl>>& for details.
 For the &(gsasl)& authenticator, this option is required for various
 mechanisms; see chapter &<<CHAPgsasl>>& for details.

-.wen

 
 For the other authenticators, &%server_condition%& can be used as an additional
 authentication or authorization mechanism that is applied after the other
 
 For the other authenticators, &%server_condition%& can be used as an additional
 authentication or authorization mechanism that is applied after the other


@@ -23985,9 +24340,10 @@ login:
   server_prompts = Username:: : Password::
   server_condition = ${if and{{ \
     !eq{}{$auth1} }{ \
   server_prompts = Username:: : Password::
   server_condition = ${if and{{ \
     !eq{}{$auth1} }{ \

-    ldapauth{user="cn=${quote_ldap_dn:$auth1},ou=people,o=example.org" \
-             pass=${quote:$auth2} \
-             ldap://ldap.example.org/} }} }
+    ldapauth{\
+      user="uid=${quote_ldap_dn:$auth1},ou=people,o=example.org" \
+      pass=${quote:$auth2} \
+      ldap://ldap.example.org/} }} }

   server_set_id = uid=$auth1,ou=people,o=example.org
 .endd
 We have to check that the username is not empty before using it, because LDAP
   server_set_id = uid=$auth1,ou=people,o=example.org
 .endd
 We have to check that the username is not empty before using it, because LDAP


@@ -24129,6 +24485,18 @@ lookup_cram:
 Note that this expansion explicitly forces failure if the lookup fails
 because &$auth1$& contains an unknown user name.
 
 Note that this expansion explicitly forces failure if the lookup fails
 because &$auth1$& contains an unknown user name.
 

+As another example, if you wish to re-use a Cyrus SASL sasldb2 file without
+using the relevant libraries, you need to know the realm to specify in the
+lookup and then ask for the &"userPassword"& attribute for that user in that
+realm, with:
+.code
+cyrusless_crammd5:
+  driver = cram_md5
+  public_name = CRAM-MD5
+  server_secret = ${lookup{$auth1:mail.example.org:userPassword}\
+                  dbmjz{/etc/sasldb2}}
+  server_set_id = $auth1
+.endd

 
 .section "Using cram_md5 as a client" "SECID177"
 .cindex "options" "&(cram_md5)& authenticator (client)"
 
 .section "Using cram_md5 as a client" "SECID177"
 .cindex "options" "&(cram_md5)& authenticator (client)"


@@ -24203,7 +24571,7 @@ Kerberos, note that because of limitations in the GSSAPI interface,
 changing the server keytab might need to be communicated down to the Kerberos
 layer independently. The mechanism for doing so is dependent upon the Kerberos
 implementation.
 changing the server keytab might need to be communicated down to the Kerberos
 layer independently. The mechanism for doing so is dependent upon the Kerberos
 implementation.

-.new
+

 For example, for older releases of Heimdal, the environment variable KRB5_KTNAME
 may be set to point to an alternative keytab file. Exim will pass this
 variable through from its own inherited environment when started as root or the
 For example, for older releases of Heimdal, the environment variable KRB5_KTNAME
 may be set to point to an alternative keytab file. Exim will pass this
 variable through from its own inherited environment when started as root or the


@@ -24212,7 +24580,6 @@ With newer releases of Heimdal, a setuid Exim may cause Heimdal to discard the
 environment variable.  In practice, for those releases, the Cyrus authenticator
 is not a suitable interface for GSSAPI (Kerberos) support.  Instead, consider
 the &(heimdal_gssapi)& authenticator, described in chapter &<<CHAPheimdalgss>>&
 environment variable.  In practice, for those releases, the Cyrus authenticator
 is not a suitable interface for GSSAPI (Kerberos) support.  Instead, consider
 the &(heimdal_gssapi)& authenticator, described in chapter &<<CHAPheimdalgss>>&

-.wen

 
 
 .section "Using cyrus_sasl as a server" "SECID178"
 
 
 .section "Using cyrus_sasl as a server" "SECID178"


@@ -24243,7 +24610,7 @@ sasl:
   server_set_id = $auth1
 .endd
 
   server_set_id = $auth1
 .endd
 

-.option server_realm cyrus_sasl string unset
+.option server_realm cyrus_sasl string&!! unset

 This specifies the SASL realm that the server claims to be in.
 
 
 This specifies the SASL realm that the server claims to be in.
 
 


@@ -24317,7 +24684,6 @@ who authenticated is placed in &$auth1$&.
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////

-.new

 .chapter "The gsasl authenticator" "CHAPgsasl"
 .scindex IIDgsaslauth1 "&(gsasl)& authenticator"
 .scindex IIDgsaslauth2 "authenticators" "&(gsasl)&"
 .chapter "The gsasl authenticator" "CHAPgsasl"
 .scindex IIDgsaslauth1 "&(gsasl)& authenticator"
 .scindex IIDgsaslauth2 "authenticators" "&(gsasl)&"


@@ -24331,14 +24697,14 @@ who authenticated is placed in &$auth1$&.
 .cindex "authentication" "CRAM-MD5"
 .cindex "authentication" "SCRAM-SHA-1"
 The &(gsasl)& authenticator provides server integration for the GNU SASL
 .cindex "authentication" "CRAM-MD5"
 .cindex "authentication" "SCRAM-SHA-1"
 The &(gsasl)& authenticator provides server integration for the GNU SASL

-library and the mechanisms it provides.  This is new as of the 4.78 release
+library and the mechanisms it provides.  This is new as of the 4.80 release

 and there are a few areas where the library does not let Exim smoothly
 scale to handle future authentication mechanisms, so no guarantee can be
 made that any particular new authentication mechanism will be supported
 without code changes in Exim.
 
 
 and there are a few areas where the library does not let Exim smoothly
 scale to handle future authentication mechanisms, so no guarantee can be
 made that any particular new authentication mechanism will be supported
 without code changes in Exim.
 
 

-.option server_channelbinding gsasl bool false
+.option server_channelbinding gsasl boolean false

 Some authentication mechanisms are able to use external context at both ends
 of the session to bind the authentication to that context, and fail the
 authentication process if that context differs.  Specifically, some TLS
 Some authentication mechanisms are able to use external context at both ends
 of the session to bind the authentication to that context, and fail the
 authentication process if that context differs.  Specifically, some TLS


@@ -24449,8 +24815,8 @@ ANONYMOUS: only &$auth1$& is set, to the possibly empty &'anonymous token'&;
 the &%server_condition%& option must be present.
 .next
 .cindex "authentication" "GSSAPI"
 the &%server_condition%& option must be present.
 .next
 .cindex "authentication" "GSSAPI"

-GSSAPI: &$auth1$& will be set to the &'authorization id'&,
-&$auth2$& will be set to the &'GSSAPI Display Name'&;
+GSSAPI: &$auth1$& will be set to the &'GSSAPI Display Name'&;
+&$auth2$& will be set to the &'authorization id'&,

 the &%server_condition%& option must be present.
 .endlist
 
 the &%server_condition%& option must be present.
 .endlist
 


@@ -24458,12 +24824,24 @@ An &'anonymous token'& is something passed along as an unauthenticated
 identifier; this is analogous to FTP anonymous authentication passing an
 email address, or software-identifier@, as the "password".
 
 identifier; this is analogous to FTP anonymous authentication passing an
 email address, or software-identifier@, as the "password".
 

-.wen
+
+An example showing the password having the realm specified in the callback
+and demonstrating a Cyrus SASL to GSASL migration approach is:
+.code
+gsasl_cyrusless_crammd5:
+  driver = gsasl
+  public_name = CRAM-MD5
+  server_realm = imap.example.org
+  server_password = ${lookup{$auth1:$auth3:userPassword}\
+                    dbmjz{/etc/sasldb2}{$value}fail}
+  server_set_id = ${quote:$auth1}
+  server_condition = yes
+.endd
+

 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.new

 .chapter "The heimdal_gssapi authenticator" "CHAPheimdalgss"
 .scindex IIDheimdalgssauth1 "&(heimdal_gssapi)& authenticator"
 .scindex IIDheimdalgssauth2 "authenticators" "&(heimdal_gssapi)&"
 .chapter "The heimdal_gssapi authenticator" "CHAPheimdalgss"
 .scindex IIDheimdalgssauth1 "&(heimdal_gssapi)& authenticator"
 .scindex IIDheimdalgssauth2 "authenticators" "&(heimdal_gssapi)&"


@@ -24483,9 +24861,6 @@ If set, then Heimdal will not use the system default keytab (typically
 &_/etc/krb5.keytab_&) but instead the pathname given in this option.
 The value should be a pathname, with no &"file:"& prefix.
 
 &_/etc/krb5.keytab_&) but instead the pathname given in this option.
 The value should be a pathname, with no &"file:"& prefix.
 

-.option server_realm heimdal_gssapi string&!! unset
-Er, unused.  XXXFIXMEXXX
-

 .option server_service heimdal_gssapi string&!! "smtp"
 This option specifies the service identifier used, in conjunction with
 &%server_hostname%&, for building the identifer for finding credentials
 .option server_service heimdal_gssapi string&!! "smtp"
 This option specifies the service identifier used, in conjunction with
 &%server_hostname%&, for building the identifer for finding credentials


@@ -24509,10 +24884,10 @@ role suffix.  For instance, &"joe/admin@EXAMPLE.ORG"&.
 .next
 .vindex "&$auth2$&"
 &$auth2$&: the &'authorization id'&, sent within SASL encapsulation after
 .next
 .vindex "&$auth2$&"
 &$auth2$&: the &'authorization id'&, sent within SASL encapsulation after

-authentication.
+authentication.  If that was empty, this will also be set to the
+GSS Display Name.

 .endlist
 
 .endlist
 

-.wen

 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////


@@ -24698,9 +25073,7 @@ There are some differences in usage when using GnuTLS instead of OpenSSL:
 The &%tls_verify_certificates%& option must contain the name of a file, not the
 name of a directory (for OpenSSL it can be either).
 .next
 The &%tls_verify_certificates%& option must contain the name of a file, not the
 name of a directory (for OpenSSL it can be either).
 .next

-The &%tls_dhparam%& option is ignored, because early versions of GnuTLS had no
-facility for varying its Diffie-Hellman parameters. I understand that this has
-changed, but Exim has not been updated to provide this facility.
+The default value for &%tls_dhparam%& differs for historical reasons.

 .next
 .vindex "&$tls_peerdn$&"
 Distinguished Name (DN) strings reported by the OpenSSL library use a slash for
 .next
 .vindex "&$tls_peerdn$&"
 Distinguished Name (DN) strings reported by the OpenSSL library use a slash for


@@ -24708,23 +25081,44 @@ separating fields; GnuTLS uses commas, in accordance with RFC 2253. This
 affects the value of the &$tls_peerdn$& variable.
 .next
 OpenSSL identifies cipher suites using hyphens as separators, for example:
 affects the value of the &$tls_peerdn$& variable.
 .next
 OpenSSL identifies cipher suites using hyphens as separators, for example:

-DES-CBC3-SHA. GnuTLS uses underscores, for example: RSA_ARCFOUR_SHA. What is
-more, OpenSSL complains if underscores are present in a cipher list. To make
-life simpler, Exim changes underscores to hyphens for OpenSSL and hyphens to
-underscores for GnuTLS when processing lists of cipher suites in the
+DES-CBC3-SHA. GnuTLS historically used underscores, for example:
+RSA_ARCFOUR_SHA. What is more, OpenSSL complains if underscores are present
+in a cipher list. To make life simpler, Exim changes underscores to hyphens
+for OpenSSL and passes the string unchanged to GnuTLS (expecting the library
+to handle its own older variants) when processing lists of cipher suites in the

 &%tls_require_ciphers%& options (the global option and the &(smtp)& transport
 option).
 .next
 The &%tls_require_ciphers%& options operate differently, as described in the
 sections &<<SECTreqciphssl>>& and &<<SECTreqciphgnu>>&.
 &%tls_require_ciphers%& options (the global option and the &(smtp)& transport
 option).
 .next
 The &%tls_require_ciphers%& options operate differently, as described in the
 sections &<<SECTreqciphssl>>& and &<<SECTreqciphgnu>>&.

+.next
+.new
+The &%tls_dh_min_bits%& SMTP transport option is only honoured by GnuTLS.
+When using OpenSSL, this option is ignored.
+(If an API is found to let OpenSSL be configured in this way,
+let the Exim Maintainers know and we'll likely use it).
+.wen
+.next
+Some other recently added features may only be available in one or the other.
+This should be documented with the feature.  If the documentation does not
+explicitly state that the feature is infeasible in the other TLS
+implementation, then patches are welcome.

 .endlist
 
 
 .endlist
 
 

-.section "GnuTLS parameter computation" "SECID181"
+.section "GnuTLS parameter computation" "SECTgnutlsparam"
+This section only applies if &%tls_dhparam%& is set to &`historic`& or to
+an explicit path; if the latter, then the text about generation still applies,
+but not the chosen filename.
+By default, as of Exim 4.80 a hard-coded D-H prime is used.
+See the documentation of &%tls_dhparam%& for more information.
+

 GnuTLS uses D-H parameters that may take a substantial amount of time
 to compute. It is unreasonable to re-compute them for every TLS session.
 Therefore, Exim keeps this data in a file in its spool directory, called
 GnuTLS uses D-H parameters that may take a substantial amount of time
 to compute. It is unreasonable to re-compute them for every TLS session.
 Therefore, Exim keeps this data in a file in its spool directory, called

-&_gnutls-params_&. The file is owned by the Exim user and is readable only by
+&_gnutls-params-NNNN_& for some value of NNNN, corresponding to the number
+of bits requested.
+The file is owned by the Exim user and is readable only by

 its owner. Every Exim process that start up GnuTLS reads the D-H
 parameters from this file. If the file does not exist, the first Exim process
 that needs it computes the data and writes it to a temporary file which is
 its owner. Every Exim process that start up GnuTLS reads the D-H
 parameters from this file. If the file does not exist, the first Exim process
 that needs it computes the data and writes it to a temporary file which is


@@ -24734,6 +25128,10 @@ place, new Exim processes immediately start using it.
 
 For maximum security, the parameters that are stored in this file should be
 recalculated periodically, the frequency depending on your paranoia level.
 
 For maximum security, the parameters that are stored in this file should be
 recalculated periodically, the frequency depending on your paranoia level.

+If you are avoiding using the fixed D-H primes published in RFCs, then you
+are concerned about some advanced attacks and will wish to do this; if you do
+not regenerate then you might as well stick to the standard primes.
+

 Arranging this is easy in principle; just delete the file when you want new
 values to be computed. However, there may be a problem. The calculation of new
 parameters needs random numbers, and these are obtained from &_/dev/random_&.
 Arranging this is easy in principle; just delete the file when you want new
 values to be computed. However, there may be a problem. The calculation of new
 parameters needs random numbers, and these are obtained from &_/dev/random_&.


@@ -24742,26 +25140,54 @@ until enough randomness (entropy) is available. This may cause Exim to hang for
 a substantial amount of time, causing timeouts on incoming connections.
 
 The solution is to generate the parameters externally to Exim. They are stored
 a substantial amount of time, causing timeouts on incoming connections.
 
 The solution is to generate the parameters externally to Exim. They are stored

-in &_gnutls-params_& in PEM format, which means that they can be generated
-externally using the &(certtool)& command that is part of GnuTLS.
+in &_gnutls-params-N_& in PEM format, which means that they can be
+generated externally using the &(certtool)& command that is part of GnuTLS.

 
 To replace the parameters with new ones, instead of deleting the file
 and letting Exim re-create it, you can generate new parameters using
 &(certtool)& and, when this has been done, replace Exim's cache file by
 renaming. The relevant commands are something like this:
 .code
 
 To replace the parameters with new ones, instead of deleting the file
 and letting Exim re-create it, you can generate new parameters using
 &(certtool)& and, when this has been done, replace Exim's cache file by
 renaming. The relevant commands are something like this:
 .code

+# ls
+[ look for file; assume gnutls-params-2236 is the most recent ]

 # rm -f new-params
 # touch new-params
 # chown exim:exim new-params
 # rm -f new-params
 # touch new-params
 # chown exim:exim new-params

+# chmod 0600 new-params
+# certtool --generate-dh-params --bits 2236 >>new-params
+# openssl dhparam -noout -text -in new-params | head
+[ check the first line, make sure it's not more than 2236;
+  if it is, then go back to the start ("rm") and repeat
+  until the size generated is at most the size requested ]

 # chmod 0400 new-params
 # chmod 0400 new-params

-# certtool --generate-privkey --bits 512 >new-params
-# echo "" >>new-params
-# certtool --generate-dh-params --bits 1024 >> new-params
-# mv new-params gnutls-params
+# mv new-params gnutls-params-2236

 .endd
 If Exim never has to generate the parameters itself, the possibility of
 stalling is removed.
 
 .endd
 If Exim never has to generate the parameters itself, the possibility of
 stalling is removed.
 

+The filename changed in Exim 4.80, to gain the -bits suffix.  The value which
+Exim will choose depends upon the version of GnuTLS in use.  For older GnuTLS,
+the value remains hard-coded in Exim as 1024.  As of GnuTLS 2.12.x, there is
+a way for Exim to ask for the "normal" number of bits for D-H public-key usage,
+and Exim does so.  This attempt to remove Exim from TLS policy decisions
+failed, as GnuTLS 2.12 returns a value higher than the current hard-coded limit
+of the NSS library.  Thus Exim gains the &%tls_dh_max_bits%& global option,
+which applies to all D-H usage, client or server.  If the value returned by
+GnuTLS is greater than &%tls_dh_max_bits%& then the value will be clamped down
+to &%tls_dh_max_bits%&.  The default value has been set at the current NSS
+limit, which is still much higher than Exim historically used.
+
+The filename and bits used will change as the GnuTLS maintainers change the
+value for their parameter &`GNUTLS_SEC_PARAM_NORMAL`&, as clamped by
+&%tls_dh_max_bits%&.  At the time of writing (mid 2012), GnuTLS 2.12 recommends
+2432 bits, while NSS is limited to 2236 bits.
+
+In fact, the requested value will be *lower* than &%tls_dh_max_bits%&, to
+increase the chance of the generated prime actually being within acceptable
+bounds, as GnuTLS has been observed to overshoot.  Note the check step in the
+procedure above.  There is no sane procedure available to Exim to double-check
+the size of the generated prime, so it might still be too large.
+

 
 .section "Requiring specific ciphers in OpenSSL" "SECTreqciphssl"
 .cindex "TLS" "requiring specific ciphers (OpenSSL)"
 
 .section "Requiring specific ciphers in OpenSSL" "SECTreqciphssl"
 .cindex "TLS" "requiring specific ciphers (OpenSSL)"


@@ -24770,7 +25196,10 @@ There is a function in the OpenSSL library that can be passed a list of cipher
 suites before the cipher negotiation takes place. This specifies which ciphers
 are acceptable. The list is colon separated and may contain names like
 DES-CBC3-SHA. Exim passes the expanded value of &%tls_require_ciphers%&
 suites before the cipher negotiation takes place. This specifies which ciphers
 are acceptable. The list is colon separated and may contain names like
 DES-CBC3-SHA. Exim passes the expanded value of &%tls_require_ciphers%&

-directly to this function call. The following quotation from the OpenSSL
+directly to this function call.
+Many systems will install the OpenSSL manual-pages, so you may have
+&'ciphers(1)'& available to you.
+The following quotation from the OpenSSL

 documentation specifies what forms of item are allowed in the cipher string:
 
 .ilist
 documentation specifies what forms of item are allowed in the cipher string:
 
 .ilist


@@ -24807,6 +25236,24 @@ includes any ciphers already present they will be ignored: that is, they will
 not be moved to the end of the list.
 .endlist
 
 not be moved to the end of the list.
 .endlist
 

+The OpenSSL &'ciphers(1)'& command may be used to test the results of a given
+string:
+.code
+# note single-quotes to get ! past any shell history expansion
+$ openssl ciphers 'HIGH:!MD5:!SHA1'
+.endd
+
+This example will let the library defaults be permitted on the MX port, where
+there's probably no identity verification anyway, but ups the ante on the
+submission ports where the administrator might have some influence on the
+choice of clients used:
+.code
+# OpenSSL variant; see man ciphers(1)
+tls_require_ciphers = ${if =={$received_port}{25}\
+                           {DEFAULT}\
+                           {HIGH:!MD5:!SHA1}}
+.endd
+

 
 
 .section "Requiring specific ciphers or other parameters in GnuTLS" &&&
 
 
 .section "Requiring specific ciphers or other parameters in GnuTLS" &&&


@@ -24816,84 +25263,44 @@ not be moved to the end of the list.
 .cindex "TLS" "specifying key exchange methods (GnuTLS)"
 .cindex "TLS" "specifying MAC algorithms (GnuTLS)"
 .cindex "TLS" "specifying protocols (GnuTLS)"
 .cindex "TLS" "specifying key exchange methods (GnuTLS)"
 .cindex "TLS" "specifying MAC algorithms (GnuTLS)"
 .cindex "TLS" "specifying protocols (GnuTLS)"

+.cindex "TLS" "specifying priority string (GnuTLS)"

 .oindex "&%tls_require_ciphers%&" "GnuTLS"
 .oindex "&%tls_require_ciphers%&" "GnuTLS"

-The GnuTLS library allows the caller to specify separate lists of permitted key
-exchange methods, main cipher algorithms, MAC algorithms, and protocols.
-Unfortunately, these lists are numerical, and the library does not have a
-function for turning names into numbers. Consequently, lists of recognized
-names have to be built into the application. The permitted key exchange
-methods, ciphers, and MAC algorithms may be used in any combination to form a
-cipher suite. This is unlike OpenSSL, where complete cipher suite names are
-passed to its control function.
-
-For compatibility with OpenSSL, the &%tls_require_ciphers%& option can be set
-to complete cipher suite names such as RSA_ARCFOUR_SHA, but for GnuTLS this
-option controls only the cipher algorithms. Exim searches each item in the
-list for the name of an available algorithm. For example, if the list
-contains RSA_AES_SHA, then AES is recognized, and the behaviour is exactly
-the same as if just AES were given.
-
-.oindex "&%gnutls_require_kx%&"
-.oindex "&%gnutls_require_mac%&"
-.oindex "&%gnutls_require_protocols%&"
-There are additional options called &%gnutls_require_kx%&,
-&%gnutls_require_mac%&, and &%gnutls_require_protocols%& that can be used to
-restrict the key exchange methods, MAC algorithms, and protocols, respectively.
-These options are ignored if OpenSSL is in use.
-
-All four options are available as global options, controlling how Exim
-behaves as a server, and also as options of the &(smtp)& transport, controlling
-how Exim behaves as a client. All the values are string expanded. After
-expansion, the values must be colon-separated lists, though the separator
-can be changed in the usual way.
-
-Each of the four lists starts out with a default set of algorithms. If the
-first item in a list does &'not'& start with an exclamation mark, all the
-default items are deleted. In this case, only those that are explicitly
-specified can be used. If the first item in a list &'does'& start with an
-exclamation mark, the defaults are left on the list.
-
-Then, any item that starts with an exclamation mark causes the relevant
-entry to be removed from the list, and any item that does not start with an
-exclamation mark causes a new entry to be added to the list. Unrecognized
-items in the list are ignored. Thus:
-.code
-tls_require_ciphers = !ARCFOUR
-.endd
-allows all the defaults except ARCFOUR, whereas
-.code
-tls_require_ciphers = AES : 3DES
-.endd
-allows only cipher suites that use AES or 3DES.
-
-For &%tls_require_ciphers%& the recognized names are AES_256, AES_128, AES
-(both of the preceding), 3DES, ARCFOUR_128, ARCFOUR_40, and ARCFOUR (both of
-the preceding). The default list does not contain all of these; it just has
-AES_256, AES_128, 3DES, and ARCFOUR_128.
-
-For &%gnutls_require_kx%&, the recognized names are DHE_RSA, RSA (which
-includes DHE_RSA), DHE_DSS, and DHE (which includes both DHE_RSA and
-DHE_DSS). The default list contains RSA, DHE_DSS, DHE_RSA.
-
-For &%gnutls_require_mac%&, the recognized names are SHA (synonym SHA1), and
-MD5. The default list contains SHA, MD5.
+The GnuTLS library allows the caller to provide a "priority string", documented
+as part of the &[gnutls_priority_init]& function.  This is very similar to the
+ciphersuite specification in OpenSSL.

 
 

-.new
-For &%gnutls_require_protocols%&, the recognized names are TLS1.2, TLS1.1,
-TLS1.0, (TLS1) and SSL3.
-The default list contains TLS1.2, TLS1.1, TLS1.0, SSL3.
-TLS1 is an alias for TLS1.0, for backwards compatibility.
-For sufficiently old versions of the GnuTLS library, TLS1.2 or TLS1.1 might
-not be supported and will not be recognised by Exim.
-.wen
+The &%tls_require_ciphers%& option is treated as the GnuTLS priority string.
+
+The &%tls_require_ciphers%& option is available both as an global option,
+controlling how Exim behaves as a server, and also as an option of the
+&(smtp)& transport, controlling how Exim behaves as a client.  In both cases
+the value is string expanded.  The resulting string is not an Exim list and
+the string is given to the GnuTLS library, so that Exim does not need to be
+aware of future feature enhancements of GnuTLS.

 
 

-In a server, the order of items in these lists is unimportant. The server
-advertises the availability of all the relevant cipher suites. However, in a
-client, the order in the &%tls_require_ciphers%& list specifies a preference
-order for the cipher algorithms. The first one in the client's list that is
-also advertised by the server is tried first. The default order is as listed
-above.
+Documentation of the strings accepted may be found in the GnuTLS manual, under
+"Priority strings".  This is online as
+&url(http://www.gnu.org/software/gnutls/manual/html_node/Priority-Strings.html),
+but beware that this relates to GnuTLS 3, which may be newer than the version
+installed on your system.  If you are using GnuTLS 3,
+&url(http://www.gnu.org/software/gnutls/manual/html_node/Listing-the-ciphersuites-in-a-priority-string.html, then the example code)
+on that site can be used to test a given string.

 
 

+Prior to Exim 4.80, an older API of GnuTLS was used, and Exim supported three
+additional options, "&%gnutls_require_kx%&", "&%gnutls_require_mac%&" and
+"&%gnutls_require_protocols%&".  &%tls_require_ciphers%& was an Exim list.
+
+This example will let the library defaults be permitted on the MX port, where
+there's probably no identity verification anyway, and lowers security further
+by increasing compatibility; but this ups the ante on the submission ports
+where the administrator might have some influence on the choice of clients
+used:
+.code
+# GnuTLS variant
+tls_require_ciphers = ${if =={$received_port}{25}\
+                           {NORMAL:%COMPAT}\
+                           {SECURE128}}
+.endd

 
 
 .section "Configuring an Exim server to use TLS" "SECID182"
 
 
 .section "Configuring an Exim server to use TLS" "SECID182"


@@ -24953,13 +25360,22 @@ this). There is one other option that may be needed in other situations. If
 tls_dhparam = /some/file/name
 .endd
 is set, the SSL library is initialized for the use of Diffie-Hellman ciphers
 tls_dhparam = /some/file/name
 .endd
 is set, the SSL library is initialized for the use of Diffie-Hellman ciphers

-with the parameters contained in the file. This increases the set of cipher
-suites that the server supports. See the command
+with the parameters contained in the file.
+Set this to &`none`& to disable use of DH entirely, by making no prime
+available:
+.code
+tls_dhparam = none
+.endd
+This may also be set to a string identifying a standard prime to be used for
+DH; if it is set to &`default`& or, for OpenSSL, is unset, then the prime
+used is &`ike23`&.  There are a few standard primes available, see the
+documetnation for &%tls_dhparam%& for the complete list.
+
+See the command

 .code
 openssl dhparam
 .endd
 .code
 openssl dhparam
 .endd

-for a way of generating this data. At present, &%tls_dhparam%& is used only
-when Exim is linked with OpenSSL. It is ignored if GnuTLS is being used.
+for a way of generating file data.

 
 The strings supplied for these three options are expanded every time a client
 host connects. It is therefore possible to use different certificates and keys
 
 The strings supplied for these three options are expanded every time a client
 host connects. It is therefore possible to use different certificates and keys


@@ -25113,9 +25529,12 @@ All the TLS options in the &(smtp)& transport are expanded before use, with
 which the client is connected. Forced failure of an expansion causes Exim to
 behave as if the relevant option were unset.
 
 which the client is connected. Forced failure of an expansion causes Exim to
 behave as if the relevant option were unset.
 

+.vindex &$tls_bits$&

 .vindex &$tls_cipher$&
 .vindex &$tls_peerdn$&
 .vindex &$tls_cipher$&
 .vindex &$tls_peerdn$&

-Before an SMTP connection is established, the &$tls_cipher$& and &$tls_peerdn$&
+.vindex &$tls_sni$&
+Before an SMTP connection is established, the
+&$tls_bits$&, &$tls_cipher$&, &$tls_peerdn$& and &$tls_sni$&

 variables are emptied. (Until the first connection, they contain the values
 that were set when the message was received.) If STARTTLS is subsequently
 successfully obeyed, these variables are set to the relevant values for the
 variables are emptied. (Until the first connection, they contain the values
 that were set when the message was received.) If STARTTLS is subsequently
 successfully obeyed, these variables are set to the relevant values for the


@@ -25123,6 +25542,80 @@ outgoing connection.
 
 
 
 
 
 

+.section "Use of TLS Server Name Indication" "SECTtlssni"
+.cindex "TLS" "Server Name Indication"
+.vindex "&$tls_sni$&"
+.oindex "&%tls_sni%&"
+With TLS1.0 or above, there is an extension mechanism by which extra
+information can be included at various points in the protocol.  One of these
+extensions, documented in RFC 6066 (and before that RFC 4366) is
+&"Server Name Indication"&, commonly &"SNI"&.  This extension is sent by the
+client in the initial handshake, so that the server can examine the servername
+within and possibly choose to use different certificates and keys (and more)
+for this session.
+
+This is analagous to HTTP's &"Host:"& header, and is the main mechanism by
+which HTTPS-enabled web-sites can be virtual-hosted, many sites to one IP
+address.
+
+With SMTP to MX, there are the same problems here as in choosing the identity
+against which to validate a certificate: you can't rely on insecure DNS to
+provide the identity which you then cryptographically verify.  So this will
+be of limited use in that environment.
+
+With SMTP to Submission, there is a well-defined hostname which clients are
+connecting to and can validate certificates against.  Thus clients &*can*&
+choose to include this information in the TLS negotiation.  If this becomes
+wide-spread, then hosters can choose to present different certificates to
+different clients.  Or even negotiate different cipher suites.
+
+The &%tls_sni%& option on an SMTP transport is an expanded string; the result,
+if not empty, will be sent on a TLS session as part of the handshake.  There's
+nothing more to it.  Choosing a sensible value not derived insecurely is the
+only point of caution.  The &$tls_sni$& variable will be set to this string
+for the lifetime of the client connection (including during authentication).
+
+Except during SMTP client sessions, if &$tls_sni$& is set then it is a string
+received from a client.
+It can be logged with the &%log_selector%& item &`+tls_sni`&.
+
+If the string &`tls_sni`& appears in the main section's &%tls_certificate%&
+option (prior to expansion) then the following options will be re-expanded
+during TLS session handshake, to permit alternative values to be chosen:
+
+.ilist
+.vindex "&%tls_certificate%&"
+&%tls_certificate%&
+.next
+.vindex "&%tls_crl%&"
+&%tls_crl%&
+.next
+.vindex "&%tls_privatekey%&"
+&%tls_privatekey%&
+.next
+.vindex "&%tls_verify_certificates%&"
+&%tls_verify_certificates%&
+.endlist
+
+Great care should be taken to deal with matters of case, various injection
+attacks in the string (&`../`& or SQL), and ensuring that a valid filename
+can always be referenced; it is important to remember that &$tls_sni$& is
+arbitrary unverified data provided prior to authentication.
+
+The Exim developers are proceeding cautiously and so far no other TLS options
+are re-expanded.
+
+When Exim is built againt OpenSSL, OpenSSL must have been built with support
+for TLS Extensions.  This holds true for OpenSSL 1.0.0+ and 0.9.8+ with
+enable-tlsext in EXTRACONFIGURE.  If you invoke &(openssl s_client -h)& and
+see &`-servername`& in the output, then OpenSSL has support.
+
+When Exim is built against GnuTLS, SNI support is available as of GnuTLS
+0.5.10.  (Its presence predates the current API which Exim uses, so if Exim
+built, then you have SNI support).
+
+
+

 .section "Multiple messages on the same encrypted TCP/IP connection" &&&
          "SECTmulmessam"
 .cindex "multiple SMTP deliveries with TLS"
 .section "Multiple messages on the same encrypted TCP/IP connection" &&&
          "SECTmulmessam"
 .cindex "multiple SMTP deliveries with TLS"


@@ -26317,6 +26810,25 @@ Notice that we put back the lower cased version afterwards, assuming that
 is what is wanted for subsequent tests.
 
 
 is what is wanted for subsequent tests.
 
 

+.new
+.vitem &*control&~=&~dscp/*&<&'value'&>
+.cindex "&ACL;" "setting DSCP value"
+.cindex "DSCP" "inbound"
+This option causes the DSCP value associated with the socket for the inbound
+connection to be adjusted to a given value, given as one of a number of fixed
+strings or to numeric value.
+The &%-bI:dscp%& option may be used to ask Exim which names it knows of.
+Common values include &`throughput`&, &`mincost`&, and on newer systems
+&`ef`&, &`af41`&, etc.  Numeric values may be in the range 0 to 0x3F.
+
+The outbound packets from Exim will be marked with this value in the header
+(for IPv4, the TOS field; for IPv6, the TCLASS field); there is no guarantee
+that these values will have any effect, not be stripped by networking
+equipment, or do much of anything without cooperation with your Network
+Engineer and those of all network operators between the source and destination.
+.wen
+
+

 .vitem &*control&~=&~debug/*&<&'options'&>
 .cindex "&ACL;" "enabling debug logging"
 .cindex "debugging" "enabling from an ACL"
 .vitem &*control&~=&~debug/*&<&'options'&>
 .cindex "&ACL;" "enabling debug logging"
 .cindex "debugging" "enabling from an ACL"


@@ -27618,14 +28130,14 @@ in the MAIL ACL. Subsequent connections from the same client will check this
 new rate.
 .code
 acl_check_connect:
 new rate.
 .code
 acl_check_connect:

-  deny ratelimit = 100 / 5m / readonly
-       log_message = RATE CHECK: $sender_rate/$sender_rate_period \
-                     (max $sender_rate_limit)
+ deny ratelimit = 100 / 5m / readonly
+    log_message = RATE CHECK: $sender_rate/$sender_rate_period \
+                  (max $sender_rate_limit)

 # ...
 acl_check_mail:
 # ...
 acl_check_mail:

-  warn ratelimit = 100 / 5m / strict
-       log_message  = RATE UPDATE: $sender_rate/$sender_rate_period \
-                      (max $sender_rate_limit)
+ warn ratelimit = 100 / 5m / strict
+    log_message = RATE UPDATE: $sender_rate/$sender_rate_period \
+                  (max $sender_rate_limit)

 .endd
 
 If Exim encounters multiple &%ratelimit%& conditions with the same key when
 .endd
 
 If Exim encounters multiple &%ratelimit%& conditions with the same key when


@@ -32977,6 +33489,7 @@ selection marked by asterisks:
 &` tls_certificate_verified   `&  certificate verification status
 &`*tls_cipher                 `&  TLS cipher suite on <= and => lines
 &` tls_peerdn                 `&  TLS peer DN on <= and => lines
 &` tls_certificate_verified   `&  certificate verification status
 &`*tls_cipher                 `&  TLS cipher suite on <= and => lines
 &` tls_peerdn                 `&  TLS peer DN on <= and => lines

+&` tls_sni                    `&  TLS SNI on <= lines

 &` unknown_in_list            `&  DNS lookup failed in list match
 
 &` all                        `&  all of the above
 &` unknown_in_list            `&  DNS lookup failed in list match
 
 &` all                        `&  all of the above


@@ -33272,6 +33785,12 @@ connection, the cipher suite used is added to the log line, preceded by X=.
 connection, and a certificate is supplied by the remote host, the peer DN is
 added to the log line, preceded by DN=.
 .next
 connection, and a certificate is supplied by the remote host, the peer DN is
 added to the log line, preceded by DN=.
 .next

+.cindex "log" "TLS SNI"
+.cindex "TLS" "logging SNI"
+&%tls_sni%&: When a message is received over an encrypted connection, and
+the remote host provided the Server Name Indication extension, the SNI is
+added to the log line, preceded by SNI=.
+.next

 .cindex "log" "DNS failure in list"
 &%unknown_in_list%&: This setting causes a log entry to be written when the
 result of a list match is failure because a DNS lookup failed.
 .cindex "log" "DNS failure in list"
 &%unknown_in_list%&: This setting causes a log entry to be written when the
 result of a list match is failure because a DNS lookup failed.


@@ -34062,6 +34581,12 @@ End
 In order to see the contents of messages on the queue, and to operate on them,
 &'eximon'& must either be run as root or by an admin user.
 
 In order to see the contents of messages on the queue, and to operate on them,
 &'eximon'& must either be run as root or by an admin user.
 

+The command-line parameters of &'eximon'& are passed to &_eximon.bin_& and may
+contain X11 resource parameters interpreted by the X11 library.  In addition,
+if the first parameter starts with the string "gdb" then it is removed and the
+binary is invoked under gdb (the parameter is used as the gdb command-name, so
+versioned variants of gdb can be invoked).
+

 The monitor's window is divided into three parts. The first contains one or
 more stripcharts and two action buttons, the second contains a &"tail"& of the
 main log file, and the third is a display of the queue of messages awaiting
 The monitor's window is divided into three parts. The first contains one or
 more stripcharts and two action buttons, the second contains a &"tail"& of the
 main log file, and the third is a display of the queue of messages awaiting


@@ -35076,10 +35601,15 @@ unqualified domain &'foundation'&.
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 

-.chapter "Support for DKIM (DomainKeys Identified Mail) - RFC4871" "CHID12" &&&
+.chapter "Support for DKIM (DomainKeys Identified Mail)" "CHID12" &&&

          "DKIM Support"
 .cindex "DKIM"
 
          "DKIM Support"
 .cindex "DKIM"
 

+DKIM is a mechanism by which messages sent by some entity can be provably
+linked to a domain which that entity controls.  It permits reputation to
+be tracked on a per-domain basis, rather than merely upon source IP address.
+DKIM is documented in RFC 4871.
+

 Since version 4.70, DKIM support is compiled into Exim by default. It can be
 disabled by setting DISABLE_DKIM=yes in Local/Makefile.
 
 Since version 4.70, DKIM support is compiled into Exim by default. It can be
 disabled by setting DISABLE_DKIM=yes in Local/Makefile.
 


@@ -35100,9 +35630,12 @@ Exim's standard controls.
 Please note that verification of DKIM signatures in incoming mail is turned
 on by default for logging purposes. For each signature in incoming email,
 exim will log a line displaying the most important signature details, and the
 Please note that verification of DKIM signatures in incoming mail is turned
 on by default for logging purposes. For each signature in incoming email,
 exim will log a line displaying the most important signature details, and the

-signature status. Here is an example:
+signature status. Here is an example (with line-breaks added for clarity):

 .code
 .code

-2009-09-09 10:22:28 1MlIRf-0003LU-U3 DKIM: d=facebookmail.com s=q1-2009b c=relaxed/relaxed a=rsa-sha1 i=@facebookmail.com t=1252484542 [verification succeeded]
+2009-09-09 10:22:28 1MlIRf-0003LU-U3 DKIM:
+    d=facebookmail.com s=q1-2009b
+    c=relaxed/relaxed a=rsa-sha1
+    i=@facebookmail.com t=1252484542 [verification succeeded]

 .endd
 You might want to turn off DKIM verification processing entirely for internal
 or relay mail sources. To do that, set the &%dkim_disable_verify%& ACL
 .endd
 You might want to turn off DKIM verification processing entirely for internal
 or relay mail sources. To do that, set the &%dkim_disable_verify%& ACL


@@ -35310,7 +35843,7 @@ for a match against the domain or identity that the ACL is currently verifying
 verb to a group of domains or identities. For example:
 
 .code
 verb to a group of domains or identities. For example:
 
 .code

-# Warn when message apparently from GMail has no signature at all
+# Warn when Mail purportedly from GMail has no signature at all

 warn log_message = GMail sender without DKIM signature
      sender_domains = gmail.com
      dkim_signers = gmail.com
 warn log_message = GMail sender without DKIM signature
      sender_domains = gmail.com
      dkim_signers = gmail.com


@@ -35320,10 +35853,10 @@ warn log_message = GMail sender without DKIM signature
 .vitem &%dkim_status%&
 ACL condition that checks a colon-separated list of possible DKIM verification
 results agains the actual result of verification. This is typically used
 .vitem &%dkim_status%&
 ACL condition that checks a colon-separated list of possible DKIM verification
 results agains the actual result of verification. This is typically used

-to restrict an ACL verb to a list of verification outcomes, like:
+to restrict an ACL verb to a list of verification outcomes, for example:

 
 .code
 
 .code

-deny message = Message from Paypal with invalid or missing signature
+deny message = Mail from Paypal with invalid/missing signature

      sender_domains = paypal.com:paypal.de
      dkim_signers = paypal.com:paypal.de
      dkim_status = none:invalid:fail
      sender_domains = paypal.com:paypal.de
      dkim_signers = paypal.com:paypal.de
      dkim_status = none:invalid:fail