* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2017 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
/* Portions Copyright (c) The OpenSSL Project 1999 */
#ifndef DISABLE_OCSP
# include <openssl/ocsp.h>
#endif
-#ifdef EXPERIMENTAL_DANE
-# include <danessl.h>
+#ifdef SUPPORT_DANE
+# include "danessl.h"
#endif
# define EXIM_HAVE_SHA256
#endif
-/*
- * X509_check_host provides sane certificate hostname checking, but was added
- * to OpenSSL late, after other projects forked off the code-base. So in
- * addition to guarding against the base version number, beware that LibreSSL
- * does not (at this time) support this function.
- *
- * If LibreSSL gains a different API, perhaps via libtls, then we'll probably
- * opt to disentangle and ask a LibreSSL user to provide glue for a third
- * crypto provider for libtls instead of continuing to tie the OpenSSL glue
- * into even twistier knots. If LibreSSL gains the same API, we can just
- * change this guard and punt the issue for a while longer.
- */
+/* X509_check_host provides sane certificate hostname checking, but was added
+to OpenSSL late, after other projects forked off the code-base. So in
+addition to guarding against the base version number, beware that LibreSSL
+does not (at this time) support this function.
+
+If LibreSSL gains a different API, perhaps via libtls, then we'll probably
+opt to disentangle and ask a LibreSSL user to provide glue for a third
+crypto provider for libtls instead of continuing to tie the OpenSSL glue
+into even twistier knots. If LibreSSL gains the same API, we can just
+change this guard and punt the issue for a while longer. */
+
#ifndef LIBRESSL_VERSION_NUMBER
# if OPENSSL_VERSION_NUMBER >= 0x010100000L
# define EXIM_HAVE_OPENSSL_CHECKHOST
+# define EXIM_HAVE_OPENSSL_DH_BITS
+# define EXIM_HAVE_OPENSSL_TLS_METHOD
+# define EXIM_HAVE_OPENSSL_KEYLOG
+# define EXIM_HAVE_OPENSSL_CIPHER_GET_ID
+# else
+# define EXIM_NEED_OPENSSL_INIT
# endif
# if OPENSSL_VERSION_NUMBER >= 0x010000000L \
&& (OPENSSL_VERSION_NUMBER & 0x0000ff000L) >= 0x000002000L
# endif
#endif
+#ifndef LIBRESSL_VERSION_NUMBER
+# if OPENSSL_VERSION_NUMBER >= 0x010101000L
+# define OPENSSL_HAVE_KEYLOG_CB
+# define OPENSSL_HAVE_NUM_TICKETS
+# define EXIM_HAVE_OPENSSL_CIPHER_STD_NAME
+# endif
+#endif
+
#if !defined(EXIM_HAVE_OPENSSL_TLSEXT) && !defined(DISABLE_OCSP)
# warning "OpenSSL library version too old; define DISABLE_OCSP in Makefile"
# define DISABLE_OCSP
#endif
+#ifdef EXIM_HAVE_OPENSSL_CHECKHOST
+# include <openssl/x509v3.h>
+#endif
+
+#ifndef EXIM_HAVE_OPENSSL_CIPHER_STD_NAME
+# ifndef EXIM_HAVE_OPENSSL_CIPHER_GET_ID
+# define SSL_CIPHER_get_id(c) (c->id)
+# endif
+# include "tls-cipher-stdname.c"
+#endif
+
+/*************************************************
+* OpenSSL option parse *
+*************************************************/
+
+typedef struct exim_openssl_option {
+ uschar *name;
+ long value;
+} exim_openssl_option;
+/* We could use a macro to expand, but we need the ifdef and not all the
+options document which version they were introduced in. Policylet: include
+all options unless explicitly for DTLS, let the administrator choose which
+to apply.
+
+This list is current as of:
+ ==> 1.0.1b <==
+Plus SSL_OP_SAFARI_ECDHE_ECDSA_BUG from 2013-June patch/discussion on openssl-dev
+Plus SSL_OP_NO_TLSv1_3 for 1.1.2-dev
+*/
+static exim_openssl_option exim_openssl_options[] = {
+/* KEEP SORTED ALPHABETICALLY! */
+#ifdef SSL_OP_ALL
+ { US"all", SSL_OP_ALL },
+#endif
+#ifdef SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
+ { US"allow_unsafe_legacy_renegotiation", SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION },
+#endif
+#ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
+ { US"cipher_server_preference", SSL_OP_CIPHER_SERVER_PREFERENCE },
+#endif
+#ifdef SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
+ { US"dont_insert_empty_fragments", SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS },
+#endif
+#ifdef SSL_OP_EPHEMERAL_RSA
+ { US"ephemeral_rsa", SSL_OP_EPHEMERAL_RSA },
+#endif
+#ifdef SSL_OP_LEGACY_SERVER_CONNECT
+ { US"legacy_server_connect", SSL_OP_LEGACY_SERVER_CONNECT },
+#endif
+#ifdef SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER
+ { US"microsoft_big_sslv3_buffer", SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER },
+#endif
+#ifdef SSL_OP_MICROSOFT_SESS_ID_BUG
+ { US"microsoft_sess_id_bug", SSL_OP_MICROSOFT_SESS_ID_BUG },
+#endif
+#ifdef SSL_OP_MSIE_SSLV2_RSA_PADDING
+ { US"msie_sslv2_rsa_padding", SSL_OP_MSIE_SSLV2_RSA_PADDING },
+#endif
+#ifdef SSL_OP_NETSCAPE_CHALLENGE_BUG
+ { US"netscape_challenge_bug", SSL_OP_NETSCAPE_CHALLENGE_BUG },
+#endif
+#ifdef SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG
+ { US"netscape_reuse_cipher_change_bug", SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG },
+#endif
+#ifdef SSL_OP_NO_COMPRESSION
+ { US"no_compression", SSL_OP_NO_COMPRESSION },
+#endif
+#ifdef SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
+ { US"no_session_resumption_on_renegotiation", SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION },
+#endif
+#ifdef SSL_OP_NO_SSLv2
+ { US"no_sslv2", SSL_OP_NO_SSLv2 },
+#endif
+#ifdef SSL_OP_NO_SSLv3
+ { US"no_sslv3", SSL_OP_NO_SSLv3 },
+#endif
+#ifdef SSL_OP_NO_TICKET
+ { US"no_ticket", SSL_OP_NO_TICKET },
+#endif
+#ifdef SSL_OP_NO_TLSv1
+ { US"no_tlsv1", SSL_OP_NO_TLSv1 },
+#endif
+#ifdef SSL_OP_NO_TLSv1_1
+#if SSL_OP_NO_TLSv1_1 == 0x00000400L
+ /* Error in chosen value in 1.0.1a; see first item in CHANGES for 1.0.1b */
+#warning OpenSSL 1.0.1a uses a bad value for SSL_OP_NO_TLSv1_1, ignoring
+#else
+ { US"no_tlsv1_1", SSL_OP_NO_TLSv1_1 },
+#endif
+#endif
+#ifdef SSL_OP_NO_TLSv1_2
+ { US"no_tlsv1_2", SSL_OP_NO_TLSv1_2 },
+#endif
+#ifdef SSL_OP_NO_TLSv1_3
+ { US"no_tlsv1_3", SSL_OP_NO_TLSv1_3 },
+#endif
+#ifdef SSL_OP_SAFARI_ECDHE_ECDSA_BUG
+ { US"safari_ecdhe_ecdsa_bug", SSL_OP_SAFARI_ECDHE_ECDSA_BUG },
+#endif
+#ifdef SSL_OP_SINGLE_DH_USE
+ { US"single_dh_use", SSL_OP_SINGLE_DH_USE },
+#endif
+#ifdef SSL_OP_SINGLE_ECDH_USE
+ { US"single_ecdh_use", SSL_OP_SINGLE_ECDH_USE },
+#endif
+#ifdef SSL_OP_SSLEAY_080_CLIENT_DH_BUG
+ { US"ssleay_080_client_dh_bug", SSL_OP_SSLEAY_080_CLIENT_DH_BUG },
+#endif
+#ifdef SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG
+ { US"sslref2_reuse_cert_type_bug", SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG },
+#endif
+#ifdef SSL_OP_TLS_BLOCK_PADDING_BUG
+ { US"tls_block_padding_bug", SSL_OP_TLS_BLOCK_PADDING_BUG },
+#endif
+#ifdef SSL_OP_TLS_D5_BUG
+ { US"tls_d5_bug", SSL_OP_TLS_D5_BUG },
+#endif
+#ifdef SSL_OP_TLS_ROLLBACK_BUG
+ { US"tls_rollback_bug", SSL_OP_TLS_ROLLBACK_BUG },
+#endif
+};
+
+#ifndef MACRO_PREDEF
+static int exim_openssl_options_size = nelem(exim_openssl_options);
+#endif
+
+#ifdef MACRO_PREDEF
+void
+options_tls(void)
+{
+uschar buf[64];
+
+for (struct exim_openssl_option * o = exim_openssl_options;
+ o < exim_openssl_options + nelem(exim_openssl_options); o++)
+ {
+ /* Trailing X is workaround for problem with _OPT_OPENSSL_NO_TLSV1
+ being a ".ifdef _OPT_OPENSSL_NO_TLSV1_3" match */
+
+ spf(buf, sizeof(buf), US"_OPT_OPENSSL_%T_X", o->name);
+ builtin_macro_create(buf);
+ }
+}
+#else
+
+/******************************************************************************/
+
/* Structure for collecting random data for seeding. */
typedef struct randstuff {
Simple case: client, `client_ctx`
As a client, we can be doing a callout or cut-through delivery while receiving
a message. So we have a client context, which should have options initialised
- from the SMTP Transport.
+ from the SMTP Transport. We may also concurrently want to make TLS connections
+ to utility daemons, so client-contexts are allocated and passed around in call
+ args rather than using a gobal.
Server:
There are two cases: with and without ServerNameIndication from the client.
configuration.
*/
-static SSL_CTX *client_ctx = NULL;
+typedef struct {
+ SSL_CTX * ctx;
+ SSL * ssl;
+ gstring * corked;
+} exim_openssl_client_tls_ctx;
+
static SSL_CTX *server_ctx = NULL;
-static SSL *client_ssl = NULL;
static SSL *server_ssl = NULL;
#ifdef EXIM_HAVE_OPENSSL_TLSEXT
typedef struct tls_ext_ctx_cb {
uschar *certificate;
uschar *privatekey;
-#ifndef DISABLE_OCSP
BOOL is_server;
+#ifndef DISABLE_OCSP
STACK_OF(X509) *verify_stack; /* chain for verifying the proof */
union {
struct {
{
if (!msg)
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
msg = US ssl_errstring;
}
-if (errstr) *errstr = string_sprintf("(%s): %s", prefix, msg);
+msg = string_sprintf("(%s): %s", prefix, msg);
+DEBUG(D_tls) debug_printf("TLS error '%s'\n", msg);
+if (errstr) *errstr = msg;
return host ? FAIL : DEFER;
}
-#ifdef EXIM_HAVE_EPHEM_RSA_KEX
/*************************************************
* Callback to generate RSA key *
*************************************************/
/*
Arguments:
- s SSL connection
+ s SSL connection (not used)
export not used
keylength keylength
#endif
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
log_write(0, LOG_MAIN|LOG_PANIC, "TLS error (RSA_generate_key): %s",
ssl_errstring);
return NULL;
}
return rsa_key;
}
-#endif
x509_store_dump_cert_s_names(X509_STORE * store)
{
STACK_OF(X509_OBJECT) * roots= store->objs;
-int i;
static uschar name[256];
-for(i= 0; i<sk_X509_OBJECT_num(roots); i++)
+for (int i= 0; i < sk_X509_OBJECT_num(roots); i++)
{
X509_OBJECT * tmp_obj= sk_X509_OBJECT_value(roots, i);
if(tmp_obj->type == X509_LU_X509)
{
- X509 * current_cert= tmp_obj->data.x509;
- X509_NAME_oneline(X509_get_subject_name(current_cert), CS name, sizeof(name));
- name[sizeof(name)-1] = '\0';
- debug_printf(" %s\n", name);
+ X509_NAME * sn = X509_get_subject_name(tmp_obj->data.x509);
+ if (X509_NAME_oneline(sn, CS name, sizeof(name)))
+ {
+ name[sizeof(name)-1] = '\0';
+ debug_printf(" %s\n", name);
+ }
}
}
}
*/
static int
-verify_callback(int preverify_ok, X509_STORE_CTX *x509ctx,
- tls_support *tlsp, BOOL *calledp, BOOL *optionalp)
+verify_callback(int preverify_ok, X509_STORE_CTX * x509ctx,
+ tls_support * tlsp, BOOL * calledp, BOOL * optionalp)
{
X509 * cert = X509_STORE_CTX_get_current_cert(x509ctx);
int depth = X509_STORE_CTX_get_error_depth(x509ctx);
uschar dn[256];
-X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn));
+if (!X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn)))
+ {
+ DEBUG(D_tls) debug_printf("X509_NAME_oneline() error\n");
+ log_write(0, LOG_MAIN, "[%s] SSL verify error: internal error",
+ tlsp == &tls_out ? deliver_host_address : sender_host_address);
+ return 0;
+ }
dn[sizeof(dn)-1] = '\0';
if (preverify_ok == 0)
{
- log_write(0, LOG_MAIN, "[%s] SSL verify error: depth=%d error=%s cert=%s",
- tlsp == &tls_out ? deliver_host_address : sender_host_address,
- depth,
- X509_verify_cert_error_string(X509_STORE_CTX_get_error(x509ctx)),
- dn);
+ uschar * extra = verify_mode ? string_sprintf(" (during %c-verify for [%s])",
+ *verify_mode, sender_host_address)
+ : US"";
+ log_write(0, LOG_MAIN, "[%s] SSL verify error%s: depth=%d error=%s cert=%s",
+ tlsp == &tls_out ? deliver_host_address : sender_host_address,
+ extra, depth,
+ X509_verify_cert_error_string(X509_STORE_CTX_get_error(x509ctx)), dn);
*calledp = TRUE;
if (!*optionalp)
{
if ( tlsp == &tls_out
&& ((verify_cert_hostnames = client_static_cbinfo->verify_cert_hostnames)))
- /* client, wanting hostname check */
+ /* client, wanting hostname check */
{
#ifdef EXIM_HAVE_OPENSSL_CHECKHOST
if (rc < 0)
{
log_write(0, LOG_MAIN, "[%s] SSL verify error: internal error",
- deliver_host_address);
+ tlsp == &tls_out ? deliver_host_address : sender_host_address);
name = NULL;
}
break;
if (!tls_is_name_for_cert(verify_cert_hostnames, cert))
#endif
{
+ uschar * extra = verify_mode
+ ? string_sprintf(" (during %c-verify for [%s])",
+ *verify_mode, sender_host_address)
+ : US"";
log_write(0, LOG_MAIN,
- "[%s] SSL verify error: certificate name mismatch: "
- "DN=\"%s\" H=\"%s\"",
- deliver_host_address, dn, verify_cert_hostnames);
+ "[%s] SSL verify error%s: certificate name mismatch: DN=\"%s\" H=\"%s\"",
+ tlsp == &tls_out ? deliver_host_address : sender_host_address,
+ extra, dn, verify_cert_hostnames);
*calledp = TRUE;
if (!*optionalp)
{
}
-#ifdef EXPERIMENTAL_DANE
+#ifdef SUPPORT_DANE
/* This gets called *by* the dane library verify callback, which interposes
itself.
BOOL dummy_called, optional = FALSE;
#endif
-X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn));
+if (!X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn)))
+ {
+ DEBUG(D_tls) debug_printf("X509_NAME_oneline() error\n");
+ log_write(0, LOG_MAIN, "[%s] SSL verify error: internal error",
+ deliver_host_address);
+ return 0;
+ }
dn[sizeof(dn)-1] = '\0';
DEBUG(D_tls) debug_printf("verify_callback_client_dane: %s depth %d %s\n",
#endif
if (preverify_ok == 1)
- tls_out.dane_verified =
- tls_out.certificate_verified = TRUE;
+ {
+ tls_out.dane_verified = tls_out.certificate_verified = TRUE;
+#ifndef DISABLE_OCSP
+ if (client_static_cbinfo->u_ocsp.client.verify_store)
+ { /* client, wanting stapling */
+ /* Add the server cert's signing chain as the one
+ for the verification of the OCSP stapled information. */
+
+ if (!X509_STORE_add_cert(client_static_cbinfo->u_ocsp.client.verify_store,
+ cert))
+ ERR_clear_error();
+ sk_X509_push(client_static_cbinfo->verify_stack, cert);
+ }
+#endif
+ }
else
{
int err = X509_STORE_CTX_get_error(x509ctx);
return preverify_ok;
}
-#endif /*EXPERIMENTAL_DANE*/
+#endif /*SUPPORT_DANE*/
/*************************************************
static void
info_callback(SSL *s, int where, int ret)
{
-where = where;
-ret = ret;
-DEBUG(D_tls) debug_printf("SSL info: %s\n", SSL_state_string_long(s));
+DEBUG(D_tls)
+ {
+ const uschar * str;
+
+ if (where & SSL_ST_CONNECT)
+ str = US"SSL_connect";
+ else if (where & SSL_ST_ACCEPT)
+ str = US"SSL_accept";
+ else
+ str = US"SSL info (undefined)";
+
+ if (where & SSL_CB_LOOP)
+ debug_printf("%s: %s\n", str, SSL_state_string_long(s));
+ else if (where & SSL_CB_ALERT)
+ debug_printf("SSL3 alert %s:%s:%s\n",
+ str = where & SSL_CB_READ ? US"read" : US"write",
+ SSL_alert_type_string_long(ret), SSL_alert_desc_string_long(ret));
+ else if (where & SSL_CB_EXIT)
+ if (ret == 0)
+ debug_printf("%s: failed in %s\n", str, SSL_state_string_long(s));
+ else if (ret < 0)
+ debug_printf("%s: error in %s\n", str, SSL_state_string_long(s));
+ else if (where & SSL_CB_HANDSHAKE_START)
+ debug_printf("%s: hshake start: %s\n", str, SSL_state_string_long(s));
+ else if (where & SSL_CB_HANDSHAKE_DONE)
+ debug_printf("%s: hshake done: %s\n", str, SSL_state_string_long(s));
+ }
+}
+
+#ifdef OPENSSL_HAVE_KEYLOG_CB
+static void
+keylog_callback(const SSL *ssl, const char *line)
+{
+DEBUG(D_tls) debug_printf("%.200s\n", line);
}
+#endif
DH *dh;
uschar *dhexpanded;
const char *pem;
+int dh_bitsize;
if (!expand_check(dhparam, US"tls_dhparam", &dhexpanded, errstr))
return FALSE;
return FALSE;
}
+/* note: our default limit of 2236 is not a multiple of 8; the limit comes from
+ * an NSS limit, and the GnuTLS APIs handle bit-sizes fine, so we went with
+ * 2236. But older OpenSSL can only report in bytes (octets), not bits.
+ * If someone wants to dance at the edge, then they can raise the limit or use
+ * current libraries. */
+#ifdef EXIM_HAVE_OPENSSL_DH_BITS
+/* Added in commit 26c79d5641d; `git describe --contains` says OpenSSL_1_1_0-pre1~1022
+ * This predates OpenSSL_1_1_0 (before a, b, ...) so is in all 1.1.0 */
+dh_bitsize = DH_bits(dh);
+#else
+dh_bitsize = 8 * DH_size(dh);
+#endif
+
/* Even if it is larger, we silently return success rather than cause things
* to fail out, so that a too-large DH will not knock out all TLS; it's a
* debatable choice. */
-if ((8*DH_size(dh)) > tls_dh_max_bits)
+if (dh_bitsize > tls_dh_max_bits)
{
DEBUG(D_tls)
debug_printf("dhparams file %d bits, is > tls_dh_max_bits limit of %d\n",
- 8*DH_size(dh), tls_dh_max_bits);
+ dh_bitsize, tls_dh_max_bits);
}
else
{
SSL_CTX_set_tmp_dh(sctx, dh);
DEBUG(D_tls)
debug_printf("Diffie-Hellman initialized from %s with %d-bit prime\n",
- dhexpanded ? dhexpanded : US"default", 8*DH_size(dh));
+ dhexpanded ? dhexpanded : US"default", dh_bitsize);
}
DH_free(dh);
SNI handling.
Separately we might try to replace using OCSP_basic_verify() - which seems to not
-be a public interface into the OpenSSL library (there's no manual entry) -
+be a public interface into the OpenSSL library (there's no manual entry) -
But what with? We also use OCSP_basic_verify in the client stapling callback.
And there we NEED it; we must verify that status... unless the
library does it for us anyway? */
{
DEBUG(D_tls)
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
debug_printf("OCSP response verify failure: %s\n", US ssl_errstring);
}
goto bad;
}
supply_response:
- cbinfo->u_ocsp.server.response = resp;
+ cbinfo->u_ocsp.server.response = resp; /*XXX stack?*/
return;
bad:
- if (running_in_test_harness)
+ if (f.running_in_test_harness)
{
extern char ** environ;
- uschar ** p;
- if (environ) for (p = USS environ; *p != NULL; p++)
+ if (environ) for (uschar ** p = USS environ; *p; p++)
if (Ustrncmp(*p, "EXIM_TESTHARNESS_DISABLE_OCSPVALIDITYCHECK", 42) == 0)
{
DEBUG(D_tls) debug_printf("Supplying known bad OCSP response\n");
goto err;
where = US"generating pkey";
- /* deprecated, use RSA_generate_key_ex() */
-if (!(rsa = RSA_generate_key(1024, RSA_F4, NULL, NULL)))
+if (!(rsa = rsa_callback(NULL, 0, 2048)))
goto err;
where = US"assigning pkey";
goto err;
X509_set_version(x509, 2); /* N+1 - version 3 */
-ASN1_INTEGER_set(X509_get_serialNumber(x509), 0);
+ASN1_INTEGER_set(X509_get_serialNumber(x509), 1);
X509_gmtime_adj(X509_get_notBefore(x509), 0);
X509_gmtime_adj(X509_get_notAfter(x509), (long)60 * 60); /* 1 hour */
X509_set_pubkey(x509, pkey);
+static int
+tls_add_certfile(SSL_CTX * sctx, tls_ext_ctx_cb * cbinfo, uschar * file,
+ uschar ** errstr)
+{
+DEBUG(D_tls) debug_printf("tls_certificate file %s\n", file);
+if (!SSL_CTX_use_certificate_chain_file(sctx, CS file))
+ return tls_error(string_sprintf(
+ "SSL_CTX_use_certificate_chain_file file=%s", file),
+ cbinfo->host, NULL, errstr);
+return 0;
+}
+
+static int
+tls_add_pkeyfile(SSL_CTX * sctx, tls_ext_ctx_cb * cbinfo, uschar * file,
+ uschar ** errstr)
+{
+DEBUG(D_tls) debug_printf("tls_privatekey file %s\n", file);
+if (!SSL_CTX_use_PrivateKey_file(sctx, CS file, SSL_FILETYPE_PEM))
+ return tls_error(string_sprintf(
+ "SSL_CTX_use_PrivateKey_file file=%s", file), cbinfo->host, NULL, errstr);
+return 0;
+}
+
+
/*************************************************
* Expand key and cert file specs *
*************************************************/
if (!cbinfo->certificate)
{
- if (cbinfo->host) /* client */
+ if (!cbinfo->is_server) /* client */
return OK;
- /* server */
+ /* server */
if (tls_install_selfsign(sctx, errstr) != OK)
return DEFER;
}
else
{
+ int err;
+
if (Ustrstr(cbinfo->certificate, US"tls_sni") ||
Ustrstr(cbinfo->certificate, US"tls_in_sni") ||
Ustrstr(cbinfo->certificate, US"tls_out_sni")
if (!expand_check(cbinfo->certificate, US"tls_certificate", &expanded, errstr))
return DEFER;
- if (expanded != NULL)
- {
- DEBUG(D_tls) debug_printf("tls_certificate file %s\n", expanded);
- if (!SSL_CTX_use_certificate_chain_file(sctx, CS expanded))
- return tls_error(string_sprintf(
- "SSL_CTX_use_certificate_chain_file file=%s", expanded),
- cbinfo->host, NULL, errstr);
- }
+ if (expanded)
+ if (cbinfo->is_server)
+ {
+ const uschar * file_list = expanded;
+ int sep = 0;
+ uschar * file;
+
+ while (file = string_nextinlist(&file_list, &sep, NULL, 0))
+ if ((err = tls_add_certfile(sctx, cbinfo, file, errstr)))
+ return err;
+ }
+ else /* would there ever be a need for multiple client certs? */
+ if ((err = tls_add_certfile(sctx, cbinfo, expanded, errstr)))
+ return err;
- if (cbinfo->privatekey != NULL &&
- !expand_check(cbinfo->privatekey, US"tls_privatekey", &expanded, errstr))
+ if ( cbinfo->privatekey
+ && !expand_check(cbinfo->privatekey, US"tls_privatekey", &expanded, errstr))
return DEFER;
/* If expansion was forced to fail, key_expanded will be NULL. If the result
key is in the same file as the certificate. */
if (expanded && *expanded)
- {
- DEBUG(D_tls) debug_printf("tls_privatekey file %s\n", expanded);
- if (!SSL_CTX_use_PrivateKey_file(sctx, CS expanded, SSL_FILETYPE_PEM))
- return tls_error(string_sprintf(
- "SSL_CTX_use_PrivateKey_file file=%s", expanded), cbinfo->host, NULL, errstr);
- }
+ if (cbinfo->is_server)
+ {
+ const uschar * file_list = expanded;
+ int sep = 0;
+ uschar * file;
+
+ while (file = string_nextinlist(&file_list, &sep, NULL, 0))
+ if ((err = tls_add_pkeyfile(sctx, cbinfo, file, errstr)))
+ return err;
+ }
+ else /* would there ever be a need for multiple client certs? */
+ if ((err = tls_add_pkeyfile(sctx, cbinfo, expanded, errstr)))
+ return err;
}
#ifndef DISABLE_OCSP
if (cbinfo->is_server && cbinfo->u_ocsp.server.file)
{
+ /*XXX stack*/
if (!expand_check(cbinfo->u_ocsp.server.file, US"tls_ocsp_file", &expanded, errstr))
return DEFER;
not confident that memcpy wouldn't break some internal reference counting.
Especially since there's a references struct member, which would be off. */
+#ifdef EXIM_HAVE_OPENSSL_TLS_METHOD
+if (!(server_sni = SSL_CTX_new(TLS_server_method())))
+#else
if (!(server_sni = SSL_CTX_new(SSLv23_server_method())))
+#endif
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
DEBUG(D_tls) debug_printf("SSL_CTX_new() failed: %s\n", ssl_errstring);
- return SSL_TLSEXT_ERR_NOACK;
+ goto bad;
}
/* Not sure how many of these are actually needed, since SSL object
if ( !init_dh(server_sni, cbinfo->dhparam, NULL, &dummy_errstr)
|| !init_ecdh(server_sni, NULL, &dummy_errstr)
)
- return SSL_TLSEXT_ERR_NOACK;
+ goto bad;
+
+if ( cbinfo->server_cipher_list
+ && !SSL_CTX_set_cipher_list(server_sni, CS cbinfo->server_cipher_list))
+ goto bad;
-if (cbinfo->server_cipher_list)
- SSL_CTX_set_cipher_list(server_sni, CS cbinfo->server_cipher_list);
#ifndef DISABLE_OCSP
if (cbinfo->u_ocsp.server.file)
{
if ((rc = setup_certs(server_sni, tls_verify_certificates, tls_crl, NULL, FALSE,
verify_callback_server, &dummy_errstr)) != OK)
- return SSL_TLSEXT_ERR_NOACK;
+ goto bad;
/* do this after setup_certs, because this can require the certs for verifying
OCSP information. */
if ((rc = tls_expand_session_files(server_sni, cbinfo, &dummy_errstr)) != OK)
- return SSL_TLSEXT_ERR_NOACK;
+ goto bad;
DEBUG(D_tls) debug_printf("Switching SSL context.\n");
SSL_set_SSL_CTX(s, server_sni);
-
return SSL_TLSEXT_ERR_OK;
+
+bad: return SSL_TLSEXT_ERR_ALERT_FATAL;
}
#endif /* EXIM_HAVE_OPENSSL_TLSEXT */
tls_server_stapling_cb(SSL *s, void *arg)
{
const tls_ext_ctx_cb *cbinfo = (tls_ext_ctx_cb *) arg;
-uschar *response_der;
+uschar *response_der; /*XXX blob */
int response_der_len;
+/*XXX stack: use SSL_get_certificate() to see which cert; from that work
+out which ocsp blob to send. Unfortunately, SSL_get_certificate is known
+buggy in current OpenSSL; it returns the last cert loaded always rather than
+the one actually presented. So we can't support a stack of OCSP proofs at
+this time. */
+
DEBUG(D_tls)
debug_printf("Received TLS status request (OCSP stapling); %s response\n",
cbinfo->u_ocsp.server.response ? "have" : "lack");
return SSL_TLSEXT_ERR_NOACK;
response_der = NULL;
-response_der_len = i2d_OCSP_RESPONSE(cbinfo->u_ocsp.server.response,
+response_der_len = i2d_OCSP_RESPONSE(cbinfo->u_ocsp.server.response, /*XXX stack*/
&response_der);
if (response_der_len <= 0)
return SSL_TLSEXT_ERR_NOACK;
int status, reason;
ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd;
- DEBUG(D_tls) bp = BIO_new_fp(stderr, BIO_NOCLOSE);
+ DEBUG(D_tls) bp = BIO_new_fp(debug_file, BIO_NOCLOSE);
/*OCSP_RESPONSE_print(bp, rsp, 0); extreme debug: stapling content */
cbinfo->u_ocsp.client.verify_store, 0)) <= 0)
{
tls_out.ocsp = OCSP_FAILED;
- if (LOGGING(tls_cipher))
- log_write(0, LOG_MAIN, "Received TLS cert status response, itself unverifiable");
+ if (LOGGING(tls_cipher)) log_write(0, LOG_MAIN,
+ "Received TLS cert status response, itself unverifiable: %s",
+ ERR_reason_error_string(ERR_peek_error()));
BIO_printf(bp, "OCSP response verify failure\n");
ERR_print_errors(bp);
+ OCSP_RESPONSE_print(bp, rsp, 0);
goto failed;
}
tls_init(SSL_CTX **ctxp, host_item *host, uschar *dhparam, uschar *certificate,
uschar *privatekey,
#ifndef DISABLE_OCSP
- uschar *ocsp_file,
+ uschar *ocsp_file, /*XXX stack, in server*/
#endif
address_item *addr, tls_ext_ctx_cb ** cbp, uschar ** errstr)
{
cbinfo = store_malloc(sizeof(tls_ext_ctx_cb));
cbinfo->certificate = certificate;
cbinfo->privatekey = privatekey;
+cbinfo->is_server = host==NULL;
#ifndef DISABLE_OCSP
cbinfo->verify_stack = NULL;
-if ((cbinfo->is_server = host==NULL))
+if (!host)
{
cbinfo->u_ocsp.server.file = ocsp_file;
cbinfo->u_ocsp.server.file_expanded = NULL;
cbinfo->event_action = NULL;
#endif
+#ifdef EXIM_NEED_OPENSSL_INIT
SSL_load_error_strings(); /* basic set up */
OpenSSL_add_ssl_algorithms();
+#endif
#ifdef EXIM_HAVE_SHA256
/* SHA256 is becoming ever more popular. This makes sure it gets added to the
By disabling with openssl_options, we can let admins re-enable with the
existing knob. */
+#ifdef EXIM_HAVE_OPENSSL_TLS_METHOD
+if (!(ctx = SSL_CTX_new(host ? TLS_client_method() : TLS_server_method())))
+#else
if (!(ctx = SSL_CTX_new(host ? SSLv23_client_method() : SSLv23_server_method())))
+#endif
return tls_error(US"SSL_CTX_new", host, NULL, errstr);
/* It turns out that we need to seed the random number generator this early in
gettimeofday(&r.tv, NULL);
r.p = getpid();
- RAND_seed((uschar *)(&r), sizeof(r));
- RAND_seed((uschar *)big_buffer, big_buffer_size);
- if (addr != NULL) RAND_seed((uschar *)addr, sizeof(addr));
+ RAND_seed(US (&r), sizeof(r));
+ RAND_seed(US big_buffer, big_buffer_size);
+ if (addr != NULL) RAND_seed(US addr, sizeof(addr));
if (!RAND_status())
return tls_error(US"RAND_status", host,
level. */
DEBUG(D_tls) SSL_CTX_set_info_callback(ctx, (void (*)())info_callback);
+#ifdef OPENSSL_HAVE_KEYLOG_CB
+DEBUG(D_tls) SSL_CTX_set_keylog_callback(ctx, (void (*)())keylog_callback);
+#endif
/* Automatically re-try reads/writes after renegotiation. */
(void) SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
else
DEBUG(D_tls) debug_printf("no SSL CTX options to set\n");
-/* Disable session cache unconditionally */
+#ifdef OPENSSL_HAVE_NUM_TICKETS
+SSL_CTX_set_num_tickets(ctx, 0); /* send no TLS1.3 stateful-tickets */
+#endif
+/* We'd like to disable session cache unconditionally, but foolish Outlook
+Express clients then give up the first TLS connection and make a second one
+(which works). Only when there is an IMAP service on the same machine.
+Presumably OE is trying to use the cache for A on B. Leave it enabled for
+now, until we work out a decent way of presenting control to the config. It
+will never be used because we use a new context every time. */
+#ifdef notdef
(void) SSL_CTX_set_session_cache_mode(ctx, SSL_SESS_CACHE_OFF);
+#endif
/* Initialize with DH parameters if supplied */
/* Initialize ECDH temp key parameter selection */
}
# endif
-if (host == NULL) /* server */
+if (!host) /* server */
{
# ifndef DISABLE_OCSP
/* We check u_ocsp.server.file, not server.response, because we care about if
/*
Argument: pointer to an SSL structure for the connection
- buffer to use for answer
- size of buffer
pointer to number of bits for cipher
-Returns: nothing
+Returns: pointer to allocated string in perm-pool
*/
-static void
-construct_cipher_name(SSL *ssl, uschar *cipherbuf, int bsize, int *bits)
+static uschar *
+construct_cipher_name(SSL * ssl, int * bits)
{
-/* With OpenSSL 1.0.0a, this needs to be const but the documentation doesn't
+int pool = store_pool;
+/* With OpenSSL 1.0.0a, 'c' needs to be const but the documentation doesn't
yet reflect that. It should be a safe change anyway, even 0.9.8 versions have
the accessor functions use const in the prototype. */
-const SSL_CIPHER *c;
-const uschar *ver;
-ver = (const uschar *)SSL_get_version(ssl);
+const uschar * ver = CUS SSL_get_version(ssl);
+const SSL_CIPHER * c = (const SSL_CIPHER *) SSL_get_current_cipher(ssl);
+uschar * s;
-c = (const SSL_CIPHER *) SSL_get_current_cipher(ssl);
SSL_CIPHER_get_bits(c, bits);
-string_format(cipherbuf, bsize, "%s:%s:%u", ver,
- SSL_CIPHER_get_name(c), *bits);
+store_pool = POOL_PERM;
+s = string_sprintf("%s:%s:%u", ver, SSL_CIPHER_get_name(c), *bits);
+store_pool = pool;
+DEBUG(D_tls) debug_printf("Cipher: %s\n", s);
+return s;
+}
+
-DEBUG(D_tls) debug_printf("Cipher: %s\n", cipherbuf);
+/* Get IETF-standard name for ciphersuite.
+Argument: pointer to an SSL structure for the connection
+Returns: pointer to string
+*/
+
+static const uschar *
+cipher_stdname_ssl(SSL * ssl)
+{
+#ifdef EXIM_HAVE_OPENSSL_CIPHER_STD_NAME
+return CUS SSL_CIPHER_standard_name(SSL_get_current_cipher(ssl));
+#else
+ushort id = 0xffff & SSL_CIPHER_get_id(SSL_get_current_cipher(ssl));
+return cipher_stdname(id >> 8, id & 0xff);
+#endif
}
static void
-peer_cert(SSL * ssl, tls_support * tlsp, uschar * peerdn, unsigned bsize)
+peer_cert(SSL * ssl, tls_support * tlsp, uschar * peerdn, unsigned siz)
{
/*XXX we might consider a list-of-certs variable for the cert chain.
SSL_get_peer_cert_chain(SSL*). We'd need a new variable type and support
in list-handling functions, also consider the difference between the entire
chain and the elements sent by the peer. */
+tlsp->peerdn = NULL;
+
/* Will have already noted peercert on a verify fail; possibly not the leaf */
if (!tlsp->peercert)
tlsp->peercert = SSL_get_peer_certificate(ssl);
/* Beware anonymous ciphers which lead to server_cert being NULL */
if (tlsp->peercert)
- {
- X509_NAME_oneline(X509_get_subject_name(tlsp->peercert), CS peerdn, bsize);
- peerdn[bsize-1] = '\0';
- tlsp->peerdn = peerdn; /*XXX a static buffer... */
- }
-else
- tlsp->peerdn = NULL;
+ if (!X509_NAME_oneline(X509_get_subject_name(tlsp->peercert), CS peerdn, siz))
+ { DEBUG(D_tls) debug_printf("X509_NAME_oneline() error\n"); }
+ else
+ {
+ peerdn[siz-1] = '\0';
+ tlsp->peerdn = peerdn; /*XXX a static buffer... */
+ }
}
* Set up for verifying certificates *
*************************************************/
+#ifndef DISABLE_OCSP
/* Load certs from file, return TRUE on success */
static BOOL
BIO * bp;
X509 * x;
+while (sk_X509_num(verify_stack) > 0)
+ X509_free(sk_X509_pop(verify_stack));
+
if (!(bp = BIO_new_file(CS file, "r"))) return FALSE;
while ((x = PEM_read_bio_X509(bp, NULL, 0, NULL)))
sk_X509_push(verify_stack, x);
BIO_free(bp);
return TRUE;
}
+#endif
-/* Called by both client and server startup
+/* Called by both client and server startup; on the server possibly
+repeated after a Server Name Indication.
Arguments:
sctx SSL_CTX* to initialise
)
{
log_write(0, LOG_MAIN|LOG_PANIC,
- "failed to load cert hain from %s", file);
+ "failed to load cert chain from %s", file);
return DEFER;
}
#endif
/* Load the list of CAs for which we will accept certs, for sending
to the client. This is only for the one-file tls_verify_certificates
variant.
- If a list isn't loaded into the server, but
- some verify locations are set, the server end appears to make
- a wildcard request for client certs.
+ If a list isn't loaded into the server, but some verify locations are set,
+ the server end appears to make a wildcard request for client certs.
Meanwhile, the client library as default behaviour *ignores* the list
we send over the wire - see man SSL_CTX_set_client_cert_cb.
Because of this, and that the dir variant is likely only used for
- the public-CA bundle (not for a private CA), not worth fixing.
- */
+ the public-CA bundle (not for a private CA), not worth fixing. */
+
if (file)
{
STACK_OF(X509_NAME) * names = SSL_load_client_CA_file(CS file);
+ SSL_CTX_set_client_CA_list(sctx, names);
DEBUG(D_tls) debug_printf("Added %d certificate authorities.\n",
sk_X509_NAME_num(names));
- SSL_CTX_set_client_CA_list(sctx, names);
}
}
}
/* If verification is optional, don't fail if no certificate */
SSL_CTX_set_verify(sctx,
- SSL_VERIFY_PEER | (optional? 0 : SSL_VERIFY_FAIL_IF_NO_PEER_CERT),
+ SSL_VERIFY_PEER | (optional ? 0 : SSL_VERIFY_FAIL_IF_NO_PEER_CERT),
cert_vfy_cb);
}
uschar * expciphers;
tls_ext_ctx_cb * cbinfo;
static uschar peerdn[256];
-static uschar cipherbuf[256];
/* Check for previous activation */
-if (tls_in.active >= 0)
+if (tls_in.active.sock >= 0)
{
tls_error(US"STARTTLS received after TLS started", NULL, US"", errstr);
smtp_printf("554 Already in TLS\r\n", FALSE);
rc = tls_init(&server_ctx, NULL, tls_dhparam, tls_certificate, tls_privatekey,
#ifndef DISABLE_OCSP
- tls_ocsp_file,
+ tls_ocsp_file, /*XXX stack*/
#endif
NULL, &server_static_cbinfo, errstr);
if (rc != OK) return rc;
/* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
were historically separated by underscores. So that I can use either form in my
tests, and also for general convenience, we turn underscores into hyphens here.
+
+XXX SSL_CTX_set_cipher_list() is replaced by SSL_CTX_set_ciphersuites()
+for TLS 1.3 . Since we do not call it at present we get the default list:
+TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
*/
if (expciphers)
optional, set up appropriately. */
tls_in.certificate_verified = FALSE;
-#ifdef EXPERIMENTAL_DANE
+#ifdef SUPPORT_DANE
tls_in.dane_verified = FALSE;
#endif
server_verify_callback_called = FALSE;
if (verify_check_host(&tls_verify_hosts) == OK)
{
rc = setup_certs(server_ctx, tls_verify_certificates, tls_crl, NULL,
- FALSE, verify_callback_server, errstr);
+ FALSE, verify_callback_server, errstr);
if (rc != OK) return rc;
server_verify_optional = FALSE;
}
else if (verify_check_host(&tls_try_verify_hosts) == OK)
{
rc = setup_certs(server_ctx, tls_verify_certificates, tls_crl, NULL,
- TRUE, verify_callback_server, errstr);
+ TRUE, verify_callback_server, errstr);
if (rc != OK) return rc;
server_verify_optional = TRUE;
}
DEBUG(D_tls) debug_printf("Calling SSL_accept\n");
sigalrm_seen = FALSE;
-if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
+if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
rc = SSL_accept(server_ssl);
-alarm(0);
+ALARM_CLR(0);
if (rc <= 0)
{
}
DEBUG(D_tls) debug_printf("SSL_accept was successful\n");
+ERR_clear_error(); /* Even success can leave errors in the stack. Seen with
+ anon-authentication ciphersuite negociated. */
/* TLS has been set up. Adjust the input functions to read via TLS,
and initialize things. */
peer_cert(server_ssl, &tls_in, peerdn, sizeof(peerdn));
-construct_cipher_name(server_ssl, cipherbuf, sizeof(cipherbuf), &tls_in.bits);
-tls_in.cipher = cipherbuf;
+tls_in.cipher = construct_cipher_name(server_ssl, &tls_in.bits);
+tls_in.cipher_stdname = cipher_stdname_ssl(server_ssl);
DEBUG(D_tls)
{
uschar buf[2048];
- if (SSL_get_shared_ciphers(server_ssl, CS buf, sizeof(buf)) != NULL)
+ if (SSL_get_shared_ciphers(server_ssl, CS buf, sizeof(buf)))
debug_printf("Shared ciphers: %s\n", buf);
+
+#ifdef EXIM_HAVE_OPENSSL_KEYLOG
+ {
+ BIO * bp = BIO_new(BIO_s_mem());
+ uschar * s;
+ int len;
+ SSL_SESSION_print_keylog(bp, SSL_get_session(server_ssl));
+ len = (int) BIO_get_mem_data(bp, CSS &s);
+ debug_printf("%.*s", len, s);
+ BIO_free(bp);
+ }
+#endif
}
/* Record the certificate we presented */
smtp_read_response()/ip_recv().
Hence no need to duplicate for _in and _out.
*/
-ssl_xfer_buffer = store_malloc(ssl_xfer_buffer_size);
+if (!ssl_xfer_buffer) ssl_xfer_buffer = store_malloc(ssl_xfer_buffer_size);
ssl_xfer_buffer_lwm = ssl_xfer_buffer_hwm = 0;
-ssl_xfer_eof = ssl_xfer_error = 0;
+ssl_xfer_eof = ssl_xfer_error = FALSE;
receive_getc = tls_getc;
receive_getbuf = tls_getbuf;
receive_ferror = tls_ferror;
receive_smtp_buffered = tls_smtp_buffered;
-tls_in.active = fileno(smtp_out);
+tls_in.active.sock = fileno(smtp_out);
+tls_in.active.tls_ctx = NULL; /* not using explicit ctx for server-side */
return OK;
}
if ( ( !ob->tls_verify_hosts
&& (!ob->tls_try_verify_hosts || !*ob->tls_try_verify_hosts)
)
- || (verify_check_given_host(&ob->tls_verify_hosts, host) == OK)
+ || verify_check_given_host(CUSS &ob->tls_verify_hosts, host) == OK
)
client_verify_optional = FALSE;
-else if (verify_check_given_host(&ob->tls_try_verify_hosts, host) == OK)
+else if (verify_check_given_host(CUSS &ob->tls_try_verify_hosts, host) == OK)
client_verify_optional = TRUE;
else
return OK;
errstr)) != OK)
return rc;
-if (verify_check_given_host(&ob->tls_verify_cert_hostnames, host) == OK)
+if (verify_check_given_host(CUSS &ob->tls_verify_cert_hostnames, host) == OK)
{
cbinfo->verify_cert_hostnames =
#ifdef SUPPORT_I18N
}
-#ifdef EXPERIMENTAL_DANE
+#ifdef SUPPORT_DANE
static int
dane_tlsa_load(SSL * ssl, host_item * host, dns_answer * dnsa, uschar ** errstr)
{
-dns_record * rr;
dns_scan dnss;
const char * hostnames[2] = { CS host->name, NULL };
int found = 0;
if (DANESSL_init(ssl, NULL, hostnames) != 1)
return tls_error(US"hostnames load", host, NULL, errstr);
-for (rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS);
- rr;
+for (dns_record * rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS); rr;
rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)
- ) if (rr->type == T_TLSA)
+ ) if (rr->type == T_TLSA && rr->size > 3)
{
const uschar * p = rr->data;
uint8_t usage, selector, mtype;
log_write(0, LOG_MAIN, "DANE error: No usable TLSA records");
return DEFER;
}
-#endif /*EXPERIMENTAL_DANE*/
+#endif /*SUPPORT_DANE*/
/* Called from the smtp transport after STARTTLS has been accepted.
-Argument:
- fd the fd of the connection
- host connected host (for messages)
- addr the first address
- tb transport (always smtp)
- tlsa_dnsa tlsa lookup, if DANE, else null
- errstr error string pointer
-
-Returns: OK on success
- FAIL otherwise - note that tls_error() will not give DEFER
- because this is not a server
+Arguments:
+ cctx connection context
+ conn_args connection details
+ cookie datum for randomness; can be NULL
+ tlsp record details of TLS channel configuration here; must be non-NULL
+ errstr error string pointer
+
+Returns: TRUE for success with TLS session context set in connection context,
+ FALSE on error
*/
-int
-tls_client_start(int fd, host_item *host, address_item *addr,
- transport_instance * tb,
-#ifdef EXPERIMENTAL_DANE
- dns_answer * tlsa_dnsa,
-#endif
- uschar ** errstr)
+BOOL
+tls_client_start(client_conn_ctx * cctx, smtp_connect_args * conn_args,
+ void * cookie, tls_support * tlsp, uschar ** errstr)
{
-smtp_transport_options_block * ob =
- (smtp_transport_options_block *)tb->options_block;
-static uschar peerdn[256];
+host_item * host = conn_args->host; /* for msgs and option-tests */
+transport_instance * tb = conn_args->tblock; /* always smtp or NULL */
+smtp_transport_options_block * ob = tb
+ ? (smtp_transport_options_block *)tb->options_block
+ : &smtp_transport_option_defaults;
+exim_openssl_client_tls_ctx * exim_client_ctx;
uschar * expciphers;
int rc;
-static uschar cipherbuf[256];
+static uschar peerdn[256];
#ifndef DISABLE_OCSP
BOOL request_ocsp = FALSE;
BOOL require_ocsp = FALSE;
#endif
-#ifdef EXPERIMENTAL_DANE
-tls_out.tlsa_usage = 0;
+rc = store_pool;
+store_pool = POOL_PERM;
+exim_client_ctx = store_get(sizeof(exim_openssl_client_tls_ctx));
+exim_client_ctx->corked = NULL;
+store_pool = rc;
+
+#ifdef SUPPORT_DANE
+tlsp->tlsa_usage = 0;
#endif
#ifndef DISABLE_OCSP
{
-# ifdef EXPERIMENTAL_DANE
- if ( tlsa_dnsa
+# ifdef SUPPORT_DANE
+ if ( conn_args->dane
&& ob->hosts_request_ocsp[0] == '*'
&& ob->hosts_request_ocsp[1] == '\0'
)
# endif
if ((require_ocsp =
- verify_check_given_host(&ob->hosts_require_ocsp, host) == OK))
+ verify_check_given_host(CUSS &ob->hosts_require_ocsp, host) == OK))
request_ocsp = TRUE;
else
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
if (!request_ocsp)
# endif
request_ocsp =
- verify_check_given_host(&ob->hosts_request_ocsp, host) == OK;
+ verify_check_given_host(CUSS &ob->hosts_request_ocsp, host) == OK;
}
#endif
-rc = tls_init(&client_ctx, host, NULL,
+rc = tls_init(&exim_client_ctx->ctx, host, NULL,
ob->tls_certificate, ob->tls_privatekey,
#ifndef DISABLE_OCSP
(void *)(long)request_ocsp,
#endif
- addr, &client_static_cbinfo, errstr);
-if (rc != OK) return rc;
+ cookie, &client_static_cbinfo, errstr);
+if (rc != OK) return FALSE;
-tls_out.certificate_verified = FALSE;
+tlsp->certificate_verified = FALSE;
client_verify_callback_called = FALSE;
-if (!expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
- &expciphers, errstr))
- return FAIL;
+expciphers = NULL;
+#ifdef SUPPORT_DANE
+if (conn_args->dane)
+ {
+ /* We fall back to tls_require_ciphers if unset, empty or forced failure, but
+ other failures should be treated as problems. */
+ if (ob->dane_require_tls_ciphers &&
+ !expand_check(ob->dane_require_tls_ciphers, US"dane_require_tls_ciphers",
+ &expciphers, errstr))
+ return FALSE;
+ if (expciphers && *expciphers == '\0')
+ expciphers = NULL;
+ }
+#endif
+if (!expciphers &&
+ !expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
+ &expciphers, errstr))
+ return FALSE;
/* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
are separated by underscores. So that I can use either form in my tests, and
uschar *s = expciphers;
while (*s) { if (*s == '_') *s = '-'; s++; }
DEBUG(D_tls) debug_printf("required ciphers: %s\n", expciphers);
- if (!SSL_CTX_set_cipher_list(client_ctx, CS expciphers))
- return tls_error(US"SSL_CTX_set_cipher_list", host, NULL, errstr);
+ if (!SSL_CTX_set_cipher_list(exim_client_ctx->ctx, CS expciphers))
+ {
+ tls_error(US"SSL_CTX_set_cipher_list", host, NULL, errstr);
+ return FALSE;
+ }
}
-#ifdef EXPERIMENTAL_DANE
-if (tlsa_dnsa)
+#ifdef SUPPORT_DANE
+if (conn_args->dane)
{
- SSL_CTX_set_verify(client_ctx,
+ SSL_CTX_set_verify(exim_client_ctx->ctx,
SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT,
verify_callback_client_dane);
if (!DANESSL_library_init())
- return tls_error(US"library init", host, NULL, errstr);
- if (DANESSL_CTX_init(client_ctx) <= 0)
- return tls_error(US"context init", host, NULL, errstr);
+ {
+ tls_error(US"library init", host, NULL, errstr);
+ return FALSE;
+ }
+ if (DANESSL_CTX_init(exim_client_ctx->ctx) <= 0)
+ {
+ tls_error(US"context init", host, NULL, errstr);
+ return FALSE;
+ }
}
else
#endif
- if ((rc = tls_client_basic_ctx_init(client_ctx, host, ob,
- client_static_cbinfo, errstr)) != OK)
- return rc;
+ if (tls_client_basic_ctx_init(exim_client_ctx->ctx, host, ob,
+ client_static_cbinfo, errstr) != OK)
+ return FALSE;
-if ((client_ssl = SSL_new(client_ctx)) == NULL)
- return tls_error(US"SSL_new", host, NULL, errstr);
-SSL_set_session_id_context(client_ssl, sid_ctx, Ustrlen(sid_ctx));
-SSL_set_fd(client_ssl, fd);
-SSL_set_connect_state(client_ssl);
+if (!(exim_client_ctx->ssl = SSL_new(exim_client_ctx->ctx)))
+ {
+ tls_error(US"SSL_new", host, NULL, errstr);
+ return FALSE;
+ }
+SSL_set_session_id_context(exim_client_ctx->ssl, sid_ctx, Ustrlen(sid_ctx));
+SSL_set_fd(exim_client_ctx->ssl, cctx->sock);
+SSL_set_connect_state(exim_client_ctx->ssl);
if (ob->tls_sni)
{
- if (!expand_check(ob->tls_sni, US"tls_sni", &tls_out.sni, errstr))
- return FAIL;
- if (!tls_out.sni)
+ if (!expand_check(ob->tls_sni, US"tls_sni", &tlsp->sni, errstr))
+ return FALSE;
+ if (!tlsp->sni)
{
DEBUG(D_tls) debug_printf("Setting TLS SNI forced to fail, not sending\n");
}
- else if (!Ustrlen(tls_out.sni))
- tls_out.sni = NULL;
+ else if (!Ustrlen(tlsp->sni))
+ tlsp->sni = NULL;
else
{
#ifdef EXIM_HAVE_OPENSSL_TLSEXT
- DEBUG(D_tls) debug_printf("Setting TLS SNI \"%s\"\n", tls_out.sni);
- SSL_set_tlsext_host_name(client_ssl, tls_out.sni);
+ DEBUG(D_tls) debug_printf("Setting TLS SNI \"%s\"\n", tlsp->sni);
+ SSL_set_tlsext_host_name(exim_client_ctx->ssl, tlsp->sni);
#else
log_write(0, LOG_MAIN, "SNI unusable with this OpenSSL library version; ignoring \"%s\"\n",
- tls_out.sni);
+ tlsp->sni);
#endif
}
}
-#ifdef EXPERIMENTAL_DANE
-if (tlsa_dnsa)
- if ((rc = dane_tlsa_load(client_ssl, host, tlsa_dnsa, errstr)) != OK)
- return rc;
+#ifdef SUPPORT_DANE
+if (conn_args->dane)
+ if (dane_tlsa_load(exim_client_ctx->ssl, host, &conn_args->tlsa_dnsa, errstr) != OK)
+ return FALSE;
#endif
#ifndef DISABLE_OCSP
/* Request certificate status at connection-time. If the server
does OCSP stapling we will get the callback (set in tls_init()) */
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
if (request_ocsp)
{
const uschar * s;
{ /* Re-eval now $tls_out_tlsa_usage is populated. If
this means we avoid the OCSP request, we wasted the setup
cost in tls_init(). */
- require_ocsp = verify_check_given_host(&ob->hosts_require_ocsp, host) == OK;
+ require_ocsp = verify_check_given_host(CUSS &ob->hosts_require_ocsp, host) == OK;
request_ocsp = require_ocsp
- || verify_check_given_host(&ob->hosts_request_ocsp, host) == OK;
+ || verify_check_given_host(CUSS &ob->hosts_request_ocsp, host) == OK;
}
}
# endif
if (request_ocsp)
{
- SSL_set_tlsext_status_type(client_ssl, TLSEXT_STATUSTYPE_ocsp);
+ SSL_set_tlsext_status_type(exim_client_ctx->ssl, TLSEXT_STATUSTYPE_ocsp);
client_static_cbinfo->u_ocsp.client.verify_required = require_ocsp;
- tls_out.ocsp = OCSP_NOT_RESP;
+ tlsp->ocsp = OCSP_NOT_RESP;
}
#endif
#ifndef DISABLE_EVENT
-client_static_cbinfo->event_action = tb->event_action;
+client_static_cbinfo->event_action = tb ? tb->event_action : NULL;
#endif
/* There doesn't seem to be a built-in timeout on connection. */
DEBUG(D_tls) debug_printf("Calling SSL_connect\n");
sigalrm_seen = FALSE;
-alarm(ob->command_timeout);
-rc = SSL_connect(client_ssl);
-alarm(0);
+ALARM(ob->command_timeout);
+rc = SSL_connect(exim_client_ctx->ssl);
+ALARM_CLR(0);
-#ifdef EXPERIMENTAL_DANE
-if (tlsa_dnsa)
- DANESSL_cleanup(client_ssl);
+#ifdef SUPPORT_DANE
+if (conn_args->dane)
+ DANESSL_cleanup(exim_client_ctx->ssl);
#endif
if (rc <= 0)
- return tls_error(US"SSL_connect", host, sigalrm_seen ? US"timed out" : NULL,
- errstr);
+ {
+ tls_error(US"SSL_connect", host, sigalrm_seen ? US"timed out" : NULL, errstr);
+ return FALSE;
+ }
-DEBUG(D_tls) debug_printf("SSL_connect succeeded\n");
+DEBUG(D_tls)
+ {
+ debug_printf("SSL_connect succeeded\n");
+#ifdef EXIM_HAVE_OPENSSL_KEYLOG
+ {
+ BIO * bp = BIO_new(BIO_s_mem());
+ if (bp)
+ {
+ uschar * s;
+ int len;
+ SSL_SESSION_print_keylog(bp, SSL_get_session(exim_client_ctx->ssl));
+ len = (int) BIO_get_mem_data(bp, CSS &s);
+ debug_printf("%.*s", len, s);
+ BIO_free(bp);
+ }
+ else
+ debug_printf("(alloc failure for keylog)\n");
+ }
+#endif
+ }
-peer_cert(client_ssl, &tls_out, peerdn, sizeof(peerdn));
+peer_cert(exim_client_ctx->ssl, tlsp, peerdn, sizeof(peerdn));
-construct_cipher_name(client_ssl, cipherbuf, sizeof(cipherbuf), &tls_out.bits);
-tls_out.cipher = cipherbuf;
+tlsp->cipher = construct_cipher_name(exim_client_ctx->ssl, &tlsp->bits);
+tlsp->cipher_stdname = cipher_stdname_ssl(exim_client_ctx->ssl);
/* Record the certificate we presented */
{
- X509 * crt = SSL_get_certificate(client_ssl);
- tls_out.ourcert = crt ? X509_dup(crt) : NULL;
+ X509 * crt = SSL_get_certificate(exim_client_ctx->ssl);
+ tlsp->ourcert = crt ? X509_dup(crt) : NULL;
}
-tls_out.active = fd;
-return OK;
+tlsp->active.sock = cctx->sock;
+tlsp->active.tls_ctx = exim_client_ctx;
+cctx->tls_ctx = exim_client_ctx;
+return TRUE;
}
DEBUG(D_tls) debug_printf("Calling SSL_read(%p, %p, %u)\n", server_ssl,
ssl_xfer_buffer, ssl_xfer_buffer_size);
-if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
+if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
inbytes = SSL_read(server_ssl, CS ssl_xfer_buffer,
MIN(ssl_xfer_buffer_size, lim));
error = SSL_get_error(server_ssl, inbytes);
-alarm(0);
+if (smtp_receive_timeout > 0) ALARM_CLR(0);
+
+if (had_command_timeout) /* set by signal handler */
+ smtp_command_timeout_exit(); /* does not return */
+if (had_command_sigterm)
+ smtp_command_sigterm_exit();
+if (had_data_timeout)
+ smtp_data_timeout_exit();
+if (had_data_sigint)
+ smtp_data_sigint_exit();
/* SSL_ERROR_ZERO_RETURN appears to mean that the SSL session has been
closed down, not that the socket itself has been closed down. Revert to
non-SSL handling. */
-if (error == SSL_ERROR_ZERO_RETURN)
+switch(error)
{
- DEBUG(D_tls) debug_printf("Got SSL_ERROR_ZERO_RETURN\n");
+ case SSL_ERROR_NONE:
+ break;
- receive_getc = smtp_getc;
- receive_getbuf = smtp_getbuf;
- receive_get_cache = smtp_get_cache;
- receive_ungetc = smtp_ungetc;
- receive_feof = smtp_feof;
- receive_ferror = smtp_ferror;
- receive_smtp_buffered = smtp_buffered;
-
- SSL_free(server_ssl);
- server_ssl = NULL;
- tls_in.active = -1;
- tls_in.bits = 0;
- tls_in.cipher = NULL;
- tls_in.peerdn = NULL;
- tls_in.sni = NULL;
+ case SSL_ERROR_ZERO_RETURN:
+ DEBUG(D_tls) debug_printf("Got SSL_ERROR_ZERO_RETURN\n");
- return FALSE;
- }
+ receive_getc = smtp_getc;
+ receive_getbuf = smtp_getbuf;
+ receive_get_cache = smtp_get_cache;
+ receive_ungetc = smtp_ungetc;
+ receive_feof = smtp_feof;
+ receive_ferror = smtp_ferror;
+ receive_smtp_buffered = smtp_buffered;
-/* Handle genuine errors */
+ if (SSL_get_shutdown(server_ssl) == SSL_RECEIVED_SHUTDOWN)
+ SSL_shutdown(server_ssl);
-else if (error == SSL_ERROR_SSL)
- {
- ERR_error_string(ERR_get_error(), ssl_errstring);
- log_write(0, LOG_MAIN, "TLS error (SSL_read): %s", ssl_errstring);
- ssl_xfer_error = 1;
- return FALSE;
- }
+#ifndef DISABLE_OCSP
+ sk_X509_pop_free(server_static_cbinfo->verify_stack, X509_free);
+ server_static_cbinfo->verify_stack = NULL;
+#endif
+ SSL_free(server_ssl);
+ SSL_CTX_free(server_ctx);
+ server_ctx = NULL;
+ server_ssl = NULL;
+ tls_in.active.sock = -1;
+ tls_in.active.tls_ctx = NULL;
+ tls_in.bits = 0;
+ tls_in.cipher = NULL;
+ tls_in.peerdn = NULL;
+ tls_in.sni = NULL;
-else if (error != SSL_ERROR_NONE)
- {
- DEBUG(D_tls) debug_printf("Got SSL error %d\n", error);
- ssl_xfer_error = 1;
- return FALSE;
+ return FALSE;
+
+ /* Handle genuine errors */
+ case SSL_ERROR_SSL:
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ log_write(0, LOG_MAIN, "TLS error (SSL_read): %s", ssl_errstring);
+ ssl_xfer_error = TRUE;
+ return FALSE;
+
+ default:
+ DEBUG(D_tls) debug_printf("Got SSL error %d\n", error);
+ DEBUG(D_tls) if (error == SSL_ERROR_SYSCALL)
+ debug_printf(" - syscall %s\n", strerror(errno));
+ ssl_xfer_error = TRUE;
+ return FALSE;
}
#ifndef DISABLE_DKIM
BOOL
tls_could_read(void)
{
-/* XXX no actual inquiry into library; only our buffer */
-return ssl_xfer_buffer_lwm < ssl_xfer_buffer_hwm;
+return ssl_xfer_buffer_lwm < ssl_xfer_buffer_hwm || SSL_pending(server_ssl) > 0;
}
/*
Arguments:
+ ct_ctx client context pointer, or NULL for the one global server context
buff buffer of data
len size of buffer
Returns: the number of bytes read
- -1 after a failed read
+ -1 after a failed read, including EOF
Only used by the client-side TLS.
*/
int
-tls_read(BOOL is_server, uschar *buff, size_t len)
+tls_read(void * ct_ctx, uschar *buff, size_t len)
{
-SSL *ssl = is_server ? server_ssl : client_ssl;
+SSL * ssl = ct_ctx ? ((exim_openssl_client_tls_ctx *)ct_ctx)->ssl : server_ssl;
int inbytes;
int error;
/*
Arguments:
- is_server channel specifier
+ ct_ctx client context pointer, or NULL for the one global server context
buff buffer of data
len number of bytes
more further data expected soon
*/
int
-tls_write(BOOL is_server, const uschar *buff, size_t len, BOOL more)
+tls_write(void * ct_ctx, const uschar *buff, size_t len, BOOL more)
{
-int outbytes;
-int error;
-int left = len;
-SSL *ssl = is_server ? server_ssl : client_ssl;
+size_t olen = len;
+int outbytes, error;
+SSL * ssl = ct_ctx
+ ? ((exim_openssl_client_tls_ctx *)ct_ctx)->ssl : server_ssl;
+static gstring * server_corked = NULL;
+gstring ** corkedp = ct_ctx
+ ? &((exim_openssl_client_tls_ctx *)ct_ctx)->corked : &server_corked;
+gstring * corked = *corkedp;
+
+DEBUG(D_tls) debug_printf("%s(%p, %lu%s)\n", __FUNCTION__,
+ buff, (unsigned long)len, more ? ", more" : "");
+
+/* Lacking a CORK or MSG_MORE facility (such as GnuTLS has) we copy data when
+"more" is notified. This hack is only ok if small amounts are involved AND only
+one stream does it, in one context (i.e. no store reset). Currently it is used
+for the responses to the received SMTP MAIL , RCPT, DATA sequence, only.
+We support callouts done by the server process by using a separate client
+context for the stashed information. */
+/* + if PIPE_COMMAND, banner & ehlo-resp for smmtp-on-connect. Suspect there's
+a store reset there, so use POOL_PERM. */
+/* + if CHUNKING, cmds EHLO,MAIL,RCPT(s),BDAT */
+
+if ((more || corked))
+ {
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ int save_pool = store_pool;
+ store_pool = POOL_PERM;
+#endif
-DEBUG(D_tls) debug_printf("%s(%p, %d)\n", __FUNCTION__, buff, left);
-while (left > 0)
+ corked = string_catn(corked, buff, len);
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ store_pool = save_pool;
+#endif
+
+ if (more)
+ {
+ *corkedp = corked;
+ return len;
+ }
+ buff = CUS corked->s;
+ len = corked->ptr;
+ *corkedp = NULL;
+ }
+
+for (int left = len; left > 0;)
{
- DEBUG(D_tls) debug_printf("SSL_write(SSL, %p, %d)\n", buff, left);
+ DEBUG(D_tls) debug_printf("SSL_write(%p, %p, %d)\n", ssl, buff, left);
outbytes = SSL_write(ssl, CS buff, left);
error = SSL_get_error(ssl, outbytes);
DEBUG(D_tls) debug_printf("outbytes=%d error=%d\n", outbytes, error);
switch (error)
{
case SSL_ERROR_SSL:
- ERR_error_string(ERR_get_error(), ssl_errstring);
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
log_write(0, LOG_MAIN, "TLS error (SSL_write): %s", ssl_errstring);
return -1;
return -1;
}
}
-return len;
+return olen;
}
daemon, to shut down the TLS library, without actually doing a shutdown (which
would tamper with the SSL session in the parent process).
-Arguments: TRUE if SSL_shutdown is to be called
+Arguments:
+ ct_ctx client TLS context pointer, or NULL for the one global server context
+ shutdown 1 if TLS close-alert is to be sent,
+ 2 if also response to be waited for
+
Returns: nothing
Used by both server-side and client-side TLS.
*/
void
-tls_close(BOOL is_server, BOOL shutdown)
+tls_close(void * ct_ctx, int shutdown)
{
-SSL **sslp = is_server ? &server_ssl : &client_ssl;
-int *fdp = is_server ? &tls_in.active : &tls_out.active;
+exim_openssl_client_tls_ctx * o_ctx = ct_ctx;
+SSL_CTX **ctxp = o_ctx ? &o_ctx->ctx : &server_ctx;
+SSL **sslp = o_ctx ? &o_ctx->ssl : &server_ssl;
+int *fdp = o_ctx ? &tls_out.active.sock : &tls_in.active.sock;
if (*fdp < 0) return; /* TLS was not active */
if (shutdown)
{
- DEBUG(D_tls) debug_printf("tls_close(): shutting down SSL\n");
- SSL_shutdown(*sslp);
+ int rc;
+ DEBUG(D_tls) debug_printf("tls_close(): shutting down TLS%s\n",
+ shutdown > 1 ? " (with response-wait)" : "");
+
+ if ( (rc = SSL_shutdown(*sslp)) == 0 /* send "close notify" alert */
+ && shutdown > 1)
+ {
+ ALARM(2);
+ rc = SSL_shutdown(*sslp); /* wait for response */
+ ALARM_CLR(0);
+ }
+
+ if (rc < 0) DEBUG(D_tls)
+ {
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ debug_printf("SSL_shutdown: %s\n", ssl_errstring);
+ }
+ }
+
+#ifndef DISABLE_OCSP
+if (!o_ctx) /* server side */
+ {
+ sk_X509_pop_free(server_static_cbinfo->verify_stack, X509_free);
+ server_static_cbinfo->verify_stack = NULL;
}
+#endif
+SSL_CTX_free(*ctxp);
SSL_free(*sslp);
+*ctxp = NULL;
*sslp = NULL;
-
*fdp = -1;
}
/* this duplicates from tls_init(), we need a better "init just global
state, for no specific purpose" singleton function of our own */
+#ifdef EXIM_NEED_OPENSSL_INIT
SSL_load_error_strings();
OpenSSL_add_ssl_algorithms();
+#endif
#if (OPENSSL_VERSION_NUMBER >= 0x0090800fL) && !defined(OPENSSL_NO_SHA256)
/* SHA256 is becoming ever more popular. This makes sure it gets added to the
list of available digests. */
err = NULL;
-ctx = SSL_CTX_new(SSLv23_server_method());
-if (!ctx)
+#ifdef EXIM_HAVE_OPENSSL_TLS_METHOD
+if (!(ctx = SSL_CTX_new(TLS_server_method())))
+#else
+if (!(ctx = SSL_CTX_new(SSLv23_server_method())))
+#endif
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
return string_sprintf("SSL_CTX_new() failed: %s", ssl_errstring);
}
if (!SSL_CTX_set_cipher_list(ctx, CS expciphers))
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
err = string_sprintf("SSL_CTX_set_cipher_list(%s) failed: %s",
expciphers, ssl_errstring);
}
int i, needed_len;
static pid_t pidlast = 0;
pid_t pidnow;
-uschar *p;
uschar smallbuf[sizeof(r)];
if (max <= 1)
gettimeofday(&r.tv, NULL);
r.p = getpid();
- RAND_seed((uschar *)(&r), sizeof(r));
+ RAND_seed(US (&r), sizeof(r));
}
/* We're after pseudo-random, not random; if we still don't have enough data
in the internal PRNG then our options are limited. We could sleep and hope
}
r = 0;
-for (p = smallbuf; needed_len; --needed_len, ++p)
- {
- r *= 256;
- r += *p;
- }
+for (uschar * p = smallbuf; needed_len; --needed_len, ++p)
+ r = 256 * r + *p;
/* We don't particularly care about weighted results; if someone wants
smooth distribution and cares enough then they should submit a patch then. */
Returns success or failure in parsing
*/
-struct exim_openssl_option {
- uschar *name;
- long value;
-};
-/* We could use a macro to expand, but we need the ifdef and not all the
-options document which version they were introduced in. Policylet: include
-all options unless explicitly for DTLS, let the administrator choose which
-to apply.
-
-This list is current as of:
- ==> 1.0.1b <==
-Plus SSL_OP_SAFARI_ECDHE_ECDSA_BUG from 2013-June patch/discussion on openssl-dev
-*/
-static struct exim_openssl_option exim_openssl_options[] = {
-/* KEEP SORTED ALPHABETICALLY! */
-#ifdef SSL_OP_ALL
- { US"all", SSL_OP_ALL },
-#endif
-#ifdef SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
- { US"allow_unsafe_legacy_renegotiation", SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION },
-#endif
-#ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
- { US"cipher_server_preference", SSL_OP_CIPHER_SERVER_PREFERENCE },
-#endif
-#ifdef SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
- { US"dont_insert_empty_fragments", SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS },
-#endif
-#ifdef SSL_OP_EPHEMERAL_RSA
- { US"ephemeral_rsa", SSL_OP_EPHEMERAL_RSA },
-#endif
-#ifdef SSL_OP_LEGACY_SERVER_CONNECT
- { US"legacy_server_connect", SSL_OP_LEGACY_SERVER_CONNECT },
-#endif
-#ifdef SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER
- { US"microsoft_big_sslv3_buffer", SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER },
-#endif
-#ifdef SSL_OP_MICROSOFT_SESS_ID_BUG
- { US"microsoft_sess_id_bug", SSL_OP_MICROSOFT_SESS_ID_BUG },
-#endif
-#ifdef SSL_OP_MSIE_SSLV2_RSA_PADDING
- { US"msie_sslv2_rsa_padding", SSL_OP_MSIE_SSLV2_RSA_PADDING },
-#endif
-#ifdef SSL_OP_NETSCAPE_CHALLENGE_BUG
- { US"netscape_challenge_bug", SSL_OP_NETSCAPE_CHALLENGE_BUG },
-#endif
-#ifdef SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG
- { US"netscape_reuse_cipher_change_bug", SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG },
-#endif
-#ifdef SSL_OP_NO_COMPRESSION
- { US"no_compression", SSL_OP_NO_COMPRESSION },
-#endif
-#ifdef SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
- { US"no_session_resumption_on_renegotiation", SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION },
-#endif
-#ifdef SSL_OP_NO_SSLv2
- { US"no_sslv2", SSL_OP_NO_SSLv2 },
-#endif
-#ifdef SSL_OP_NO_SSLv3
- { US"no_sslv3", SSL_OP_NO_SSLv3 },
-#endif
-#ifdef SSL_OP_NO_TICKET
- { US"no_ticket", SSL_OP_NO_TICKET },
-#endif
-#ifdef SSL_OP_NO_TLSv1
- { US"no_tlsv1", SSL_OP_NO_TLSv1 },
-#endif
-#ifdef SSL_OP_NO_TLSv1_1
-#if SSL_OP_NO_TLSv1_1 == 0x00000400L
- /* Error in chosen value in 1.0.1a; see first item in CHANGES for 1.0.1b */
-#warning OpenSSL 1.0.1a uses a bad value for SSL_OP_NO_TLSv1_1, ignoring
-#else
- { US"no_tlsv1_1", SSL_OP_NO_TLSv1_1 },
-#endif
-#endif
-#ifdef SSL_OP_NO_TLSv1_2
- { US"no_tlsv1_2", SSL_OP_NO_TLSv1_2 },
-#endif
-#ifdef SSL_OP_SAFARI_ECDHE_ECDSA_BUG
- { US"safari_ecdhe_ecdsa_bug", SSL_OP_SAFARI_ECDHE_ECDSA_BUG },
-#endif
-#ifdef SSL_OP_SINGLE_DH_USE
- { US"single_dh_use", SSL_OP_SINGLE_DH_USE },
-#endif
-#ifdef SSL_OP_SINGLE_ECDH_USE
- { US"single_ecdh_use", SSL_OP_SINGLE_ECDH_USE },
-#endif
-#ifdef SSL_OP_SSLEAY_080_CLIENT_DH_BUG
- { US"ssleay_080_client_dh_bug", SSL_OP_SSLEAY_080_CLIENT_DH_BUG },
-#endif
-#ifdef SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG
- { US"sslref2_reuse_cert_type_bug", SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG },
-#endif
-#ifdef SSL_OP_TLS_BLOCK_PADDING_BUG
- { US"tls_block_padding_bug", SSL_OP_TLS_BLOCK_PADDING_BUG },
-#endif
-#ifdef SSL_OP_TLS_D5_BUG
- { US"tls_d5_bug", SSL_OP_TLS_D5_BUG },
-#endif
-#ifdef SSL_OP_TLS_ROLLBACK_BUG
- { US"tls_rollback_bug", SSL_OP_TLS_ROLLBACK_BUG },
-#endif
-};
-static int exim_openssl_options_size =
- sizeof(exim_openssl_options)/sizeof(struct exim_openssl_option);
static BOOL
tls_openssl_options_parse(uschar *option_spec, long *results)
{
long result, item;
-uschar *s, *end;
+uschar *end;
uschar keep_c;
BOOL adding, item_parsed;
return TRUE;
}
-for (s=option_spec; *s != '\0'; /**/)
+for (uschar * s = option_spec; *s != '\0'; /**/)
{
while (isspace(*s)) ++s;
if (*s == '\0')
return TRUE;
}
+#endif /*!MACRO_PREDEF*/
/* vi: aw ai sw=2
*/
/* End of tls-openssl.c */
git://git.exim.org / users / heiko / exim.git / blobdiff