Support hostnames and IPv6 addresses for spamd_address. Bug 1259

[users/heiko/exim.git] / src / OS / Makefile-Base

diff --git a/src/OS/Makefile-Base b/src/OS/Makefile-Base
index deb0e44f15decdb4cb3f9bcdc166bebf9104d9d0..38d719837162b2419d6a709bf71927e468ec8e37 100644 (file)
--- a/src/OS/Makefile-Base
+++ b/src/OS/Makefile-Base
@@ -32,7 +32,8 @@ FE       = $(FULLECHO)
 # up-to-date. Then the os-specific source files and the C configuration file
 # are set up, and finally it goes to the main Exim target.
 
 # up-to-date. Then the os-specific source files and the C configuration file
 # are set up, and finally it goes to the main Exim target.
 

-all:    $(EDITME) checklocalmake Makefile os.h os.c config.h version.h allexim
+all:       utils exim
+config:    $(EDITME) checklocalmake Makefile os.h os.c config.h version.h

 
 checklocalmake:
        @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
 
 checklocalmake:
        @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \


@@ -94,20 +95,16 @@ config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 # therefore always be run, even if the files exist. This shouldn't in fact be a
 # problem, but it does no harm. Other make programs will just ignore this.
 
 # therefore always be run, even if the files exist. This shouldn't in fact be a
 # problem, but it does no harm. Other make programs will just ignore this.
 

-.PHONY: all allexim buildauths buildlookups buildpdkim buildrouters \
+.PHONY: all config utils \
+       buildauths buildlookups buildpdkim buildrouters \

         buildtransports checklocalmake clean
 
 
         buildtransports checklocalmake clean
 
 

-# This is the real default target for all the various exim binaries and
-# scripts, once the configuring stuff is done.
-
-allexim: config.h $(EXIM_MONITOR) exicyclog exinext exiwhat \
+utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \

         exigrep eximstats exipick exiqgrep exiqsumm \
         transport-filter.pl convert4r3 convert4r4 \
         exim_checkaccess \
         exigrep eximstats exipick exiqgrep exiqsumm \
         transport-filter.pl convert4r3 convert4r4 \
         exim_checkaccess \

-        exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \
-        buildlookups buildrouters buildtransports \
-        buildauths buildpdkim exim
+        exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock

 
 
 # Targets for special-purpose configuration header builders
 
 
 # Targets for special-purpose configuration header builders


@@ -117,7 +114,7 @@ buildconfig: buildconfig.c
 
 
 # Target for the exicyclog utility script
 
 
 # Target for the exicyclog utility script

-exicyclog: Makefile config.h ../src/exicyclog.src
+exicyclog: config ../src/exicyclog.src

        @rm -f exicyclog
        @sed \
          -e "s?PROCESSED_FLAG?This file has been so processed.?"\
        @rm -f exicyclog
        @sed \
          -e "s?PROCESSED_FLAG?This file has been so processed.?"\


@@ -142,7 +139,7 @@ exicyclog: Makefile config.h ../src/exicyclog.src
        @echo ">>> exicyclog script built"
 
 # Target for the exinext utility script
        @echo ">>> exicyclog script built"
 
 # Target for the exinext utility script

-exinext: Makefile config.h ../src/exinext.src
+exinext: config ../src/exinext.src

        @rm -f exinext
        @sed \
          -e "s?PROCESSED_FLAG?This file has been so processed.?"\
        @rm -f exinext
        @sed \
          -e "s?PROCESSED_FLAG?This file has been so processed.?"\


@@ -157,7 +154,7 @@ exinext: Makefile config.h ../src/exinext.src
        @echo ">>> exinext script built"
 
 # Target for the exiwhat utility script
        @echo ">>> exinext script built"
 
 # Target for the exiwhat utility script

-exiwhat: Makefile config.h ../src/exiwhat.src
+exiwhat: config ../src/exiwhat.src

        @rm -f exiwhat
        @sed \
          -e "s?PROCESSED_FLAG?This file has been so processed.?"\
        @rm -f exiwhat
        @sed \
          -e "s?PROCESSED_FLAG?This file has been so processed.?"\


@@ -178,7 +175,7 @@ exiwhat: Makefile config.h ../src/exiwhat.src
        @echo ">>> exiwhat script built"
 
 # Target for the exim_checkaccess utility script
        @echo ">>> exiwhat script built"
 
 # Target for the exim_checkaccess utility script

-exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
+exim_checkaccess: config ../src/exim_checkaccess.src

        @rm -f exim_checkaccess
        @sed \
          -e "s?PROCESSED_FLAG?This file has been so processed.?"\
        @rm -f exim_checkaccess
        @sed \
          -e "s?PROCESSED_FLAG?This file has been so processed.?"\


@@ -194,7 +191,7 @@ exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
        @echo ">>> exim_checkaccess script built"; echo ""
 
 # Target for the Exim monitor start-up script
        @echo ">>> exim_checkaccess script built"; echo ""
 
 # Target for the Exim monitor start-up script

-eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \
+eximon: config ../src/eximon.src ../OS/eximon.conf-Default \

           ../Local/eximon.conf
        @rm -f eximon
        $(SHELL) $(SCRIPTS)/Configure-eximon
           ../Local/eximon.conf
        @rm -f eximon
        $(SHELL) $(SCRIPTS)/Configure-eximon


@@ -298,11 +295,13 @@ convert4r4: Makefile ../src/convert4r4.src
 
 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 OBJ_WITH_OLD_DEMIME = demime.o
 
 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 OBJ_WITH_OLD_DEMIME = demime.o

-OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o
+OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o dmarc.o dane.o

 
 # Targets for final binaries; the main one has a build number which is
 # updated each time. We don't bother with that for the auxiliaries.
 
 
 # Targets for final binaries; the main one has a build number which is
 # updated each time. We don't bother with that for the auxiliaries.
 

+OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
+

 OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
         filtertest.o globals.o dkim.o \
 OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
         filtertest.o globals.o dkim.o \


@@ -310,13 +309,13 @@ OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
         os.o parse.o queue.o \
         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
         os.o parse.o queue.o \
         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \

-        store.o string.o tls.o tod.o transport.o tree.o verify.o \
-        lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o \
+        std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
+        $(OBJ_LOOKUPS) \

         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
 
         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
 

-exim:   lookups/lookups.a auths/auths.a pdkim/pdkim.a \
-        routers/routers.a transports/transports.a \
+exim:   buildlookups buildauths pdkim/pdkim.a \
+        buildrouters buildtransports \

         $(OBJ_EXIM) version.o
        @echo "$(LNCC) -o exim"
        $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
         $(OBJ_EXIM) version.o
        @echo "$(LNCC) -o exim"
        $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \


@@ -353,7 +352,7 @@ exim_dumpdb: $(OBJ_DUMPDB)
 
 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 
 
 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 

-exim_fixdb:  $(OBJ_FIXDB) auths/auths.a
+exim_fixdb:  $(OBJ_FIXDB) buildauths

        @echo "$(LNCC) -o exim_fixdb"
        $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
          auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
        @echo "$(LNCC) -o exim_fixdb"
        $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
          auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)


@@ -458,6 +457,8 @@ PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../gl
 version.h::
        @../scripts/reversion
 
 version.h::
        @../scripts/reversion
 

+cnumber.h: version.h
+

 version.o: $(HDRS) cnumber.h version.h version.c
 
 # This is the dummy module for use by test compiles of individual modules. It
 version.o: $(HDRS) cnumber.h version.h version.c
 
 # This is the dummy module for use by test compiles of individual modules. It


@@ -527,7 +528,7 @@ util-os.o:       $(HDRS) os.c
 # The local scan module depends only on its own special header, and is compiled
 # from a source whose location is set by configuration.
 
 # The local scan module depends only on its own special header, and is compiled
 # from a source whose location is set by configuration.
 

-local_scan.o:    Makefile config.h local_scan.h ../$(LOCAL_SCAN_SOURCE)
+local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)

        @echo "$(CC) local_scan.c"
        $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 
        @echo "$(CC) local_scan.c"
        $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 


@@ -571,9 +572,10 @@ smtp_in.o:       $(HDRS) smtp_in.c
 smtp_out.o:      $(HDRS) smtp_out.c
 spool_in.o:      $(HDRS) spool_in.c
 spool_out.o:     $(HDRS) spool_out.c
 smtp_out.o:      $(HDRS) smtp_out.c
 spool_in.o:      $(HDRS) spool_in.c
 spool_out.o:     $(HDRS) spool_out.c

+std-crypto.o:    $(HDRS) std-crypto.c

 store.o:         $(HDRS) store.c
 string.o:        $(HDRS) string.c
 store.o:         $(HDRS) store.c
 string.o:        $(HDRS) string.c

-tls.o:           $(HDRS) tls.c tls-gnu.c tls-openssl.c
+tls.o:           $(HDRS) tls.c tls-gnu.c tlscert-gnu.c tls-openssl.c tlscert-openssl.c

 tod.o:           $(HDRS) tod.c
 transport.o:     $(HDRS) transport.c
 tree.o:          $(HDRS) tree.c
 tod.o:           $(HDRS) tod.c
 transport.o:     $(HDRS) transport.c
 tree.o:          $(HDRS) tree.c


@@ -597,9 +599,11 @@ demime.o:        $(HDRS) demime.c
 # Dependencies for EXPERIMENTAL_* modules
 
 bmi_spam.o:      $(HDRS) bmi_spam.c
 # Dependencies for EXPERIMENTAL_* modules
 
 bmi_spam.o:      $(HDRS) bmi_spam.c

+dane.o:                 $(HDRS) dane.c dane-gnu.c dane-openssl.c
+dcc.o:           $(HDRS) dcc.h dcc.c
+dmarc.o:         $(HDRS) dmarc.h dmarc.c

 spf.o:           $(HDRS) spf.h spf.c
 srs.o:           $(HDRS) srs.h srs.c
 spf.o:           $(HDRS) spf.h spf.c
 srs.o:           $(HDRS) srs.h srs.c

-dcc.o:           $(HDRS) dcc.h dcc.c

 
 # The module containing tables of available lookups, routers, auths, and
 # transports must be rebuilt if any of them are. However, because the makefiles
 
 # The module containing tables of available lookups, routers, auths, and
 # transports must be rebuilt if any of them are. However, because the makefiles


@@ -611,6 +615,11 @@ dcc.o:           $(HDRS) dcc.h dcc.c
 
 drtables.o:      $(HDRS) drtables.c
 
 
 drtables.o:      $(HDRS) drtables.c
 

+# We depend upon object files built as part of building the lookups library
+# When using parallel make, we don't have the dependency to force building
+# in the sub-directory unless we force that dependency:
+
+$(OBJ_LOOKUPS):  buildlookups

 
 # The exim monitor's private modules - the sources live in a private
 # subdirectory. The final binary combines the private modules with some
 
 # The exim monitor's private modules - the sources live in a private
 # subdirectory. The final binary combines the private modules with some


@@ -638,7 +647,7 @@ $(MONBIN): $(HDRS)
 
 # The lookups library.
 
 
 # The lookups library.
 

-buildlookups lookups/lookups.a: config.h version.h
+buildlookups: config

         @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
         @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \


@@ -647,7 +656,7 @@ buildlookups lookups/lookups.a: config.h version.h
 
 # The routers library.
 
 
 # The routers library.
 

-buildrouters routers/routers.a: config.h
+buildrouters: config

         @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
         @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"


@@ -655,7 +664,7 @@ buildrouters routers/routers.a: config.h
 
 # The transports library.
 
 
 # The transports library.
 

-buildtransports transports/transports.a: config.h
+buildtransports: config

         @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
         @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"


@@ -663,7 +672,7 @@ buildtransports transports/transports.a: config.h
 
 # The library of authorization modules
 
 
 # The library of authorization modules
 

-buildauths auths/auths.a: config.h
+buildauths: config

         @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
         @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"


@@ -671,7 +680,8 @@ buildauths auths/auths.a: config.h
 
 # The PDKIM library
 
 
 # The PDKIM library
 

-buildpdkim pdkim/pdkim.a: config.h
+buildpdkim: pdkim/pdkim.a
+pdkim/pdkim.a: config

         @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
         @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"