Enforce that only smtp transports can be used for verify callouts. Bug 1445

[users/heiko/exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index ece837d03f77bbefafef5d906f9129a8e4687171..c412c1e1675e124f5c7909a77fe6eabf6a08837f 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -10171,6 +10171,14 @@ number of larger units and output in Exim's normal time format, for example,
 .cindex "expansion" "case forcing"
 .cindex "&%uc%& expansion item"
 This forces the letters in the string into upper-case.
 .cindex "expansion" "case forcing"
 .cindex "&%uc%& expansion item"
 This forces the letters in the string into upper-case.

+
+.vitem &*${utf8clean:*&<&'string'&>&*}*&
+.cindex "correction of invalid utf-8 sequences in strings"
+.cindex "utf-8" "utf-8 sequences"
+.cindex "incorrect utf-8"
+.cindex "expansion" "utf-8 forcing"
+.cindex "&%utf8clean%& expansion item"
+This replaces any invalid utf-8 sequence in the string by the character &`?`&.

 .endlist
 
 
 .endlist
 
 


@@ -23019,6 +23027,14 @@ unknown state), opens a new one to the same host, and then tries the delivery
 in clear.
 
 
 in clear.
 
 

+.option tls_try_verify_hosts smtp "host list&!! unset
+.cindex "TLS" "server certificate verification"
+.cindex "certificate" "verification of server"
+For OpenSSL only, this option gives a list of hosts for which, on encrypted connections,
+certificate verification will be tried but need not succeed.
+The &%tls_verify_certificates%& option must also be set.
+
+

 .option tls_verify_certificates smtp string&!! unset
 .cindex "TLS" "server certificate verification"
 .cindex "certificate" "verification of server"
 .option tls_verify_certificates smtp string&!! unset
 .cindex "TLS" "server certificate verification"
 .cindex "certificate" "verification of server"


@@ -23033,6 +23049,20 @@ single file if you are using GnuTLS. The values of &$host$& and
 &$host_address$& are set to the name and address of the server during the
 expansion of this option. See chapter &<<CHAPTLS>>& for details of TLS.
 
 &$host_address$& are set to the name and address of the server during the
 expansion of this option. See chapter &<<CHAPTLS>>& for details of TLS.
 

+For back-compatability, or when GnuTLS is used,
+if neither tls_verify_hosts nor tls_try_verify_hosts are set
+and certificate verification fails the TLS connection is closed.
+
+
+.option tls_verify_hosts smtp "host list&!! unset
+.cindex "TLS" "server certificate verification"
+.cindex "certificate" "verification of server"
+For OpenSSL only, this option gives a list of hosts for which. on encrypted connections,
+certificate verification must succeed.
+The &%tls_verify_certificates%& option must also be set.
+If both this option and &%tls_try_verify_hosts%& are unset
+operation is as if this option selected all hosts.
+

 
 
 
 
 
 


@@ -25934,6 +25964,12 @@ for OpenSSL only (not GnuTLS), a directory, that contains a collection of
 expected server certificates. The client verifies the server's certificate
 against this collection, taking into account any revoked certificates that are
 in the list defined by &%tls_crl%&.
 expected server certificates. The client verifies the server's certificate
 against this collection, taking into account any revoked certificates that are
 in the list defined by &%tls_crl%&.

+Failure to verify fails the TLS connection unless either of the
+&%tls_verify_hosts%& or &%tls_try_verify_hosts%& options are set.
+
+The &%tls_verify_hosts%& and &%tls_try_verify_hosts%& options restrict
+certificate verification to the listed servers.  Verification either must
+or need not succeed respectively.

 
 If
 &%tls_require_ciphers%& is set on the &(smtp)& transport, it must contain a
 
 If
 &%tls_require_ciphers%& is set on the &(smtp)& transport, it must contain a


@@ -27294,8 +27330,12 @@ from one SMTP connection to another.  If a recipient-verify callout connection i
 requested in the same ACL it is held open and used for the data, otherwise one is made
 after the ACL completes.
 
 requested in the same ACL it is held open and used for the data, otherwise one is made
 after the ACL completes.
 

-Note that routers are used in verify mode.  Note also that headers cannot be
+Note that routers are used in verify mode,
+and cannot depend on content of received headers.
+Note also that headers cannot be

 modified by any of the post-data ACLs (DATA, MIME and DKIM).
 modified by any of the post-data ACLs (DATA, MIME and DKIM).

+Headers may be modified by routers (subject to the above) and transports.
+

 Cutthrough delivery is not supported via transport-filters or when DKIM signing
 of outgoing messages is done, because it sends data to the ultimate destination
 before the entire message has been received from the source.
 Cutthrough delivery is not supported via transport-filters or when DKIM signing
 of outgoing messages is done, because it sends data to the ultimate destination
 before the entire message has been received from the source.


@@ -27983,6 +28023,23 @@ This condition checks whether the sending host (the client) is authorized to
 send email. Details of how this works are given in section
 &<<SECTverifyCSA>>&.
 
 send email. Details of how this works are given in section
 &<<SECTverifyCSA>>&.
 

+.new
+.vitem &*verify&~=&~header_names_ascii*&
+.cindex "&%verify%& ACL condition"
+.cindex "&ACL;" "verifying header names only ASCII"
+.cindex "header lines" "verifying header names only ASCII"
+.cindex "verifying" "header names only ASCII"
+This condition is relevant only in an ACL that is run after a message has been
+received, that is, in an ACL specified by &%acl_smtp_data%& or
+&%acl_not_smtp%&.  It checks all header names (not the content) to make sure
+there are no non-ASCII characters, also excluding control characters.  The
+allowable characters are decimal ASCII values 33 through 126.
+
+Exim itself will handle headers with non-ASCII characters, but it can cause
+problems for downstream applications, so this option will allow their
+detection and rejection in the DATA ACL's.
+.wen
+

 .vitem &*verify&~=&~header_sender/*&<&'options'&>
 .cindex "&%verify%& ACL condition"
 .cindex "&ACL;" "verifying sender in the header"
 .vitem &*verify&~=&~header_sender/*&<&'options'&>
 .cindex "&%verify%& ACL condition"
 .cindex "&ACL;" "verifying sender in the header"


@@ -28594,6 +28651,13 @@ deny   condition = ${if isip4{$sender_host_address}}
        dnslists  = some.list.example
 .endd
 
        dnslists  = some.list.example
 .endd
 

+If an explicit key is being used for a DNS lookup and it may be an IPv6
+address you should specify alternate list separators for both the outer
+(DNS list name) list and inner (lookup keys) list:
+.code
+       dnslists = <; dnsbl.example.com/<|$acl_m_addrslist
+.endd
+

 .section "Rate limiting incoming messages" "SECTratelimiting"
 .cindex "rate limiting" "client sending"
 .cindex "limiting client sending rates"
 .section "Rate limiting incoming messages" "SECTratelimiting"
 .cindex "rate limiting" "client sending"
 .cindex "limiting client sending rates"


@@ -28975,6 +29039,7 @@ router that does not set up hosts routes to an &(smtp)& transport with a
 &%hosts%& setting, the transport's hosts are used. If an &(smtp)& transport has
 &%hosts_override%& set, its hosts are always used, whether or not the router
 supplies a host list.
 &%hosts%& setting, the transport's hosts are used. If an &(smtp)& transport has
 &%hosts_override%& set, its hosts are always used, whether or not the router
 supplies a host list.

+Callouts are only supported on &(smtp)& transports.

 
 The port that is used is taken from the transport, if it is specified and is a
 remote transport. (For routers that do verification only, no transport need be
 
 The port that is used is taken from the transport, if it is specified and is a
 remote transport. (For routers that do verification only, no transport need be


@@ -29778,6 +29843,24 @@ av_scanner = mksd:2
 .endd
 You can safely omit this option (the default value is 1).
 
 .endd
 You can safely omit this option (the default value is 1).
 

+.vitem &%sock%&
+.cindex "virus scanners" "simple socket-connected"
+This is a general-purpose way of talking to simple scanner daemons
+running on the local machine.
+There are four options:
+an address (which may be an IP addres and port, or the path of a Unix socket),
+a commandline to send (may include a single %s which will be replaced with
+the path to the mail file to be scanned),
+an RE to trigger on from the returned data,
+an RE to extract malware_name from the returned data.
+For example:
+.code
+av_scanner = sock:127.0.0.1 6001:%s:(SPAM|VIRUS):(.*)\$
+.endd
+Default for the socket specifier is &_/tmp/malware.sock_&.
+Default for the commandline is &_%s\n_&.
+Both regular-expressions are required.
+

 .vitem &%sophie%&
 .cindex "virus scanners" "Sophos and Sophie"
 Sophie is a daemon that uses Sophos' &%libsavi%& library to scan for viruses.
 .vitem &%sophie%&
 .cindex "virus scanners" "Sophos and Sophie"
 Sophie is a daemon that uses Sophos' &%libsavi%& library to scan for viruses.


@@ -34024,6 +34107,7 @@ the following table:
 &`R   `&        on &`<=`& lines: reference for local bounce
 &`    `&        on &`=>`&  &`**`& and &`==`& lines: router name
 &`S   `&        size of message
 &`R   `&        on &`<=`& lines: reference for local bounce
 &`    `&        on &`=>`&  &`**`& and &`==`& lines: router name
 &`S   `&        size of message

+&`SNI `&        server name indication from TLS client hello

 &`ST  `&        shadow transport name
 &`T   `&        on &`<=`& lines: message subject (topic)
 &`    `&        on &`=>`& &`**`& and &`==`& lines: transport name
 &`ST  `&        shadow transport name
 &`T   `&        on &`<=`& lines: message subject (topic)
 &`    `&        on &`=>`& &`**`& and &`==`& lines: transport name


@@ -34333,7 +34417,8 @@ The message that is written is &"spool file is locked"&.
 .next
 .cindex "log" "smtp confirmation"
 .cindex "SMTP" "logging confirmation"
 .next
 .cindex "log" "smtp confirmation"
 .cindex "SMTP" "logging confirmation"

-&%smtp_confirmation%&: The response to the final &"."& in the SMTP dialogue for
+.cindex "LMTP" "logging confirmation"
+&%smtp_confirmation%&: The response to the final &"."& in the SMTP or LMTP dialogue for

 outgoing messages is added to delivery log lines in the form &`C=`&<&'text'&>.
 A number of MTAs (including Exim) return an identifying string in this
 response.
 outgoing messages is added to delivery log lines in the form &`C=`&<&'text'&>.
 A number of MTAs (including Exim) return an identifying string in this
 response.