Expansions: ${sha2_N}

[users/heiko/exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 6638e8c01fb52692a2797ea22ca67da73edf4120..d78378c9b9307d47173fc19b70acbcb3230500fa 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -9200,6 +9200,7 @@ Many strings in Exim's runtime configuration are expanded before use. Some of
 them are expanded every time they are used; others are expanded only once.
 
 When a string is being expanded it is copied verbatim from left to right except
+.cindex expansion "string concatenation"
 when a dollar or backslash character is encountered. A dollar specifies the
 start of a portion of the string that is interpreted and replaced as described
 below in section &<<SECTexpansionitems>>& onwards. Backslash is used as an
@@ -10957,10 +10958,14 @@ returns the SHA-1 hash fingerprint of the certificate.
 
 
 .vitem &*${sha256:*&<&'string'&>&*}*&
+.vitem &*${sha2:*&<&'string'&>&*}*& &&&
+       &*${sha2_<n>:*&<&'string'&>&*}*&
 .cindex "SHA-256 hash"
+.cindex "SHA-2 hash"
 .cindex certificate fingerprint
 .cindex "expansion" "SHA-256 hashing"
 .cindex "&%sha256%& expansion item"
+.cindex "&%sha2%& expansion item"
 The &%sha256%& operator computes the SHA-256 hash value of the string
 and returns
 it as a 64-digit hexadecimal number, in which any letters are in upper case.
@@ -10968,6 +10973,15 @@ it as a 64-digit hexadecimal number, in which any letters are in upper case.
 If the string is a single variable of type certificate,
 returns the SHA-256 hash fingerprint of the certificate.
 
+.new
+The operator can also be spelled &%sha2%& and does the same as &%sha256%&
+(except for certificates, which are not supported).
+Finally, if an underbar
+and a number is appended it specifies the output length, selecting a
+member of the SHA-2 family of hash functions.
+Values of 256, 384 and 512 are accepted, with 256 being the default.
+.wen
+
 
 .vitem &*${sha3:*&<&'string'&>&*}*& &&&
        &*${sha3_<n>:*&<&'string'&>&*}*&
@@ -12182,6 +12196,7 @@ This variable contains the version string of the Exim build.
 The first character is a major version number, currently 4.
 Then after a dot, the next group of digits is a minor version number.
 There may be other characters following the minor version.
+This value may be overridden by the &%exim_version%& main config option.
 
 .vitem &$header_$&<&'name'&>
 This is not strictly an expansion variable. It is expansion syntax for
@@ -13513,7 +13528,8 @@ Otherwise, empty.
 
 .vitem &$version_number$&
 .vindex "&$version_number$&"
-The version number of Exim.
+The version number of Exim. Same as &$exim_version$&, may be overridden
+by the &%exim_version%& main config option.
 
 .vitem &$warn_message_delay$&
 .vindex "&$warn_message_delay$&"
@@ -15344,6 +15360,14 @@ not also supplied, the gid is taken from the result of &[getpwnam()]& if it is
 used. See chapter &<<CHAPsecurity>>& for a discussion of security issues.
 
 
+.option exim_version main string "current version"
+.cindex "Exim version"
+.cindex customizing "version number"
+.cindex "version number of Exim" override
+This option allows to override the &$version_number$&/&$exim_version$& Exim reports in
+various places.  Use with care, this may fool stupid security scanners.
+
+
 .option extra_local_interfaces main "string list" unset
 This option defines network interfaces that are to be considered local when
 routing, but which are not used for listening by the daemon. See section
@@ -16169,7 +16193,7 @@ harm. This option overrides the &%pipe_as_creator%& option of the &(pipe)&
 transport driver.
 
 
-.option openssl_options main "string list" "+no_sslv2 +single_dh_use +no_ticket"
+.option openssl_options main "string list" "+no_sslv2 +no_sslv3 +single_dh_use +no_ticket"
 .cindex "OpenSSL "compatibility options"
 This option allows an administrator to adjust the SSL options applied
 by OpenSSL to connections.  It is given as a space-separated list of items,
@@ -17565,7 +17589,7 @@ use when sending messages as a client, you must set the &%tls_certificate%&
 option in the relevant &(smtp)& transport.
 
 &*Note*&: If you use filenames based on IP addresses, change the list
-separator in the usual way (&<<SECTlistsepchange>>&) >to avoid confusion under IPv6.
+separator in the usual way (&<<SECTlistsepchange>>&) to avoid confusion under IPv6.
 
 &*Note*&: Under versions of OpenSSL preceding 1.1.1,
 when a list of more than one
@@ -24568,13 +24592,15 @@ been started will not be passed to a new delivery process for sending another
 message on the same connection. See section &<<SECTmulmessam>>& for an
 explanation of when this might be needed.
 
-.option hosts_noproxy_tls smtp "host list&!!" *
+.new
+.option hosts_noproxy_tls smtp "host list&!!" unset
 .cindex "TLS" "passing connection"
 .cindex "multiple SMTP deliveries"
 .cindex "TLS" "multiple message deliveries"
 For any host that matches this list, a TLS session which has
 been started will not be passed to a new delivery process for sending another
 message on the same session.
+.wen
 
 The traditional implementation closes down TLS and re-starts it in the new
 process, on the same open TCP connection, for each successive message
@@ -28319,7 +28345,7 @@ There is no current way to staple a proof for a client certificate.
 
 
 
-.section "Configuring an Exim client to use TLS" "SECID185"
+.section "Configuring an Exim client to use TLS" "SECTclientTLS"
 .cindex "cipher" "logging"
 .cindex "log" "TLS cipher"
 .cindex "log" "distinguished name"
@@ -30844,7 +30870,7 @@ For SMTP input that does not come over TCP/IP (the &%-bs%& command line
 option), this condition is always true.
 
 
-.vitem &*verify&~=&~not_blind*&
+.vitem &*verify&~=&~not_blind/*&<&'options'&>
 .cindex "verifying" "not blind"
 .cindex "bcc recipients, verifying none"
 This condition checks that there are no blind (bcc) recipients in the message.
@@ -30854,6 +30880,11 @@ case-sensitively; domains are checked case-insensitively. If &'Resent-To:'& or
 &'Resent-Cc:'& header lines exist, they are also checked. This condition can be
 used only in a DATA or non-SMTP ACL.
 
+.new
+There is one possible option, &`case_insensitive`&.  If this is present then
+local parts are checked case-insensitively.
+.wen
+
 There are, of course, many legitimate messages that make use of blind (bcc)
 recipients. This check should not be used on its own for blocking messages.
 
@@ -37704,6 +37735,11 @@ Match only frozen messages.
 
 .vitem &*-x*&
 Match only non-frozen messages.
+
+.new
+.vitem &*-G*&&~<&'queuename'&>
+Match only messages in the given queue.  Without this, the default queue is searched.
+.wen
 .endlist
 
 The following options control the format of the output: