Fix memory bug (could segfault) for $reply_address when Reply-to: is

[users/heiko/exim.git] / doc / doc-txt / NewStuff

diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index 0805e0b5b67c17efad21f7c9020ebd6b3f7617a5..2d653616df1a0ad011de867009056e27044a0892 100644 (file)
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -1,4 +1,4 @@
-$Cambridge: exim/doc/doc-txt/NewStuff,v 1.51 2005/06/21 14:14:55 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/NewStuff,v 1.61 2005/08/02 15:19:20 ph10 Exp $

 
 New Features in Exim
 --------------------
 
 New Features in Exim
 --------------------


@@ -8,6 +8,66 @@ but have not yet made it into the main manual (which is most conveniently
 updated when there is a relatively large batch of changes). The doc/ChangeLog
 file contains a listing of all changes, including bug fixes.
 
 updated when there is a relatively large batch of changes). The doc/ChangeLog
 file contains a listing of all changes, including bug fixes.
 

+Exim version 4.53
+-----------------
+
+TK/01 Added the "success_on_redirect" address verification option. When an
+      address generates new addresses during routing, Exim will abort
+      verification with "success" when more than one address has been
+      generated, but continue to verify a single new address. The latter
+      does not happen when the new "success_on_redirect" option is set, like
+
+      require verify = recipient/success_on_redirect/callout=10s
+
+      In that case, verification will succeed when a router generates a new
+      address.
+
+PH/01 Support for SQLite database lookups has been added. This is another
+      query-style lookup, but it is slightly different from the others because
+      a file name is required in addition to the SQL query. This is because an
+      SQLite database is a single file and there is no daemon as in other SQL
+      databases. The interface to Exim requires the name of the file, as an
+      absolute path, to be given at the start of the query. It is separated
+      from the query by white space. This means that the path name cannot
+      contain white space. Here is a lookup expansion example:
+
+        ${lookup sqlite {/some/thing/sqlitedb \
+          select name from aliases where id='ph10';}}
+
+      In a list, the syntax is similar. For example:
+
+        domainlist relay_domains = sqlite;/some/thing/sqlitedb \
+           select * from relays where ip='$sender_host_address';
+
+      The only character affected by the ${quote_sqlite: operator is a single
+      quote, which it doubles.
+
+      Note that you must set LOOKUP_SQLITE=yes in Local/Makefile in order to
+      obtain SQLite support, and you will also need to add -lsqlite3 to the
+      EXTRALIBS setting. And of course, you have to install SQLite on your
+      host first.
+
+PH/02 The variable $message_id is now deprecated, to be replaced by
+      $message_exim_id, which makes it clearer which ID is being referenced.
+
+PH/03 The use of forbid_filter_existstest now also locks out the use of the
+      ${stat: expansion item.
+
+PH/04 The IGNOREQUOTA extension to the LMTP protocol is now available in both
+      the lmtp transport and the smtp transport running in LMTP mode. In the
+      lmtp transport there is a new Boolean option called ignore_quota, and in
+      the smtp transport there is a new Boolean option called
+      lmtp_ignore_quota. If either of these options is set TRUE, the string
+      "IGNOREQUOTA" is added to RCPT commands when using the LMTP protocol,
+      provided that the server has advertised support for IGNOREQUOTA in its
+      response to the LHLO command.
+
+PH/05 Previously, if "verify = helo" was set in an ACL, the condition was true
+      only if the host matched helo_try_verify_hosts, which caused the
+      verification to occur when the EHLO/HELO command was issued. The ACL just
+      tested the remembered result. Now, if a previous verification attempt has
+      not happened, "verify = helo" does it there and then.
+

 
 Exim version 4.52
 -----------------
 
 Exim version 4.52
 -----------------


@@ -150,6 +210,12 @@ TF/04 There is a new ratelimit ACL condition which can be used to measure
       example, you can limit the sending rate of each authenticated user,
       independent of the computer they are sending from, by setting the key
       to $authenticated_id. The default key is $sender_host_address.
       example, you can limit the sending rate of each authenticated user,
       independent of the computer they are sending from, by setting the key
       to $authenticated_id. The default key is $sender_host_address.

+      Internally, Exim includes the smoothing constant p and the options in
+      the lookup key because they alter the meaning of the stored data.
+      This is not true for the limit m, so you can alter the configured
+      maximum rate and Exim will still remember clients' past behaviour,
+      but if you alter the other ratelimit parameters Exim will effectively
+      forget their past behaviour.

 
       Each ratelimit condition can have up to two options. The first option
       specifies what Exim measures the rate of, and the second specifies how
 
       Each ratelimit condition can have up to two options. The first option
       specifies what Exim measures the rate of, and the second specifies how


@@ -235,6 +301,14 @@ TF/04 There is a new ratelimit ACL condition which can be used to measure
                         cdb {DB/ratelimits.cdb} \
                         {$value} {RATELIMIT} }
 
                         cdb {DB/ratelimits.cdb} \
                         {$value} {RATELIMIT} }
 

+      Warning: if you have a busy server with a lot of ratelimit tests,
+      especially with the per_rcpt option, you may suffer from a performance
+      bottleneck caused by locking on the ratelimit hints database. Apart from
+      making your ACLs less complicated, you can reduce the problem by using a
+      RAM disk for Exim's hints directory, /var/spool/exim/db/. However this
+      means that Exim will lose its hints data after a reboot (including retry
+      hints, the callout cache, and ratelimit data).
+

 TK/01 Added an 'spf' lookup type that will return an SPF result for a given
       email address (the key) and an IP address (the database):
 
 TK/01 Added an 'spf' lookup type that will return an SPF result for a given
       email address (the key) and an IP address (the database):
 


@@ -349,6 +423,48 @@ PH/04 There are two new options that control the retrying done by the daemon
       of retries after the first failure (default 9); daemon_startup_sleep
       defines the length of time to wait between retries (default 30s).
 
       of retries after the first failure (default 9); daemon_startup_sleep
       defines the length of time to wait between retries (default 30s).
 

+PH/05 There is now a new ${if condition called "match_ip". It is similar to
+      match_domain, etc. It must be followed by two argument strings. The first
+      (after expansion) must be an IP address or an empty string. The second
+      (after expansion) is a restricted host list that can match only an IP
+      address, not a host name. For example:
+
+        ${if match_ip{$sender_host_address}{1.2.3.4:5.6.7.8}{...}{...}}
+
+      The specific types of host list item that are permitted in the list are
+      shown below. Consult the manual section on host lists for further
+      details.
+
+      . An IP address, optionally with a CIDR mask.
+
+      . A single asterisk matches any IP address.
+
+      . An empty item matches only if the IP address is empty. This could be
+        useful for testing for a locally submitted message or one from specific
+        hosts in a single test such as
+
+          ${if match_ip{$sender_host_address}{:4.3.2.1:...}{...}{...}}
+
+        where the first item in the list is the empty string.
+
+      . The item @[] matches any of the local host's interface addresses.
+
+      . Lookups are assumed to be "net-" style lookups, even if "net-" is not
+        specified. Thus, the following are equivalent:
+
+          ${if match_ip{$sender_host_address}{lsearch;/some/file}...
+          ${if match_ip{$sender_host_address}{net-lsearch;/some/file}...
+
+        You do need to specify the "net-" prefix if you want to specify a
+        specific address mask, for example, by using "net24-".
+
+PH/06 The "+all" debug selector used to set the flags for all possible output;
+      it is something that people tend to use semi-automatically when
+      generating debug output for me or for the list. However, by including
+      "+memory", an awful lot of output that is very rarely of interest was
+      generated. I have changed this so that "+all" no longer includes
+      "+memory". However, "-all" still turns everything off.
+

 
 Version 4.51
 ------------
 
 Version 4.51
 ------------