Logging: make placement of continued-delivery asterisk consistent

[users/heiko/exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index d62ceafd73c5047de20d559ed24fa03cf719c115..55ccb1632b5727a8bac1935abbe7b14da873621e 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -3885,7 +3885,9 @@ id, and the remaining ones must be email addresses. However, if the message is
 active (in the middle of a delivery attempt), it is not altered. This option
 can be used only by an admin user.
 
 active (in the middle of a delivery attempt), it is not altered. This option
 can be used only by an admin user.
 

-.vitem "&%-MC%&&~<&'transport'&>&~<&'hostname'&>&~<&'sequence&~number'&>&&&
+.vitem "&%-MC%&&~<&'transport'&>&~<&'hostname'&>&&&
+       &~<&'host&~IP'&>&&&
+       &~<&'sequence&~number'&>&&&

         &~<&'message&~id'&>"
 .oindex "&%-MC%&"
 .cindex "SMTP" "passed connection"
         &~<&'message&~id'&>"
 .oindex "&%-MC%&"
 .cindex "SMTP" "passed connection"


@@ -13703,7 +13705,11 @@ filter file to set values that can be tested in users' filter files. For
 example, a system filter could set a value indicating how likely it is that a
 message is junk mail.
 
 example, a system filter could set a value indicating how likely it is that a
 message is junk mail.
 

-.vitem &$spam_$&&'xxx'&
+.vitem &$spam_score$& &&&
+       &$spam_score_int$& &&&
+       &$spam_bar$& &&&
+       &$spam_report$& &&&
+       &$spam_action$&

 A number of variables whose names start with &$spam$& are available when Exim
 is compiled with the content-scanning extension. For details, see section
 &<<SECTscanspamass>>&.
 A number of variables whose names start with &$spam$& are available when Exim
 is compiled with the content-scanning extension. For details, see section
 &<<SECTscanspamass>>&.


@@ -16977,7 +16983,7 @@ not count as protocol errors (see &%smtp_max_synprot_errors%&).
 .option pipelining_connect_advertise_hosts main "host list&!!" *
 .cindex "pipelining" "early connection"
 .cindex "pipelining" PIPE_CONNECT
 .option pipelining_connect_advertise_hosts main "host list&!!" *
 .cindex "pipelining" "early connection"
 .cindex "pipelining" PIPE_CONNECT

-.cindex "ESMTP extensions" X_PIPE_CONNECT
+.cindex "ESMTP extensions" PIPE_CONNECT

 If Exim is built with the SUPPORT_PIPE_CONNECT build option
 this option controls which hosts the facility is advertised to
 and from which pipeline early-connection (before MAIL) SMTP
 If Exim is built with the SUPPORT_PIPE_CONNECT build option
 this option controls which hosts the facility is advertised to
 and from which pipeline early-connection (before MAIL) SMTP


@@ -16986,7 +16992,9 @@ When used, the pipelining saves on roundtrip times.
 
 See also the &%hosts_pipe_connect%& smtp transport option.
 
 
 See also the &%hosts_pipe_connect%& smtp transport option.
 

-Currently the option name &"X_PIPE_CONNECT"& is used.
+.new
+The SMTP service extension keyword advertised is &"PIPE_CONNECT"&.
+.wen

 
 
 .option prdr_enable main boolean false
 
 
 .option prdr_enable main boolean false


@@ -19724,6 +19732,10 @@ Values containing a list-separator should have them doubled.
 When a router runs, the strings are evaluated in order,
 to create variables which are added to the set associated with
 the address.
 When a router runs, the strings are evaluated in order,
 to create variables which are added to the set associated with
 the address.

+.new
+This is done immediately after all the preconditions, before the
+evaluation of the &%address_data%& option.
+.wen

 The variable is set with the expansion of the value.
 The variables can be used by the router options
 (not including any preconditions)
 The variable is set with the expansion of the value.
 The variables can be used by the router options
 (not including any preconditions)


@@ -27362,7 +27374,7 @@ conditions:
 .ilist
 The client host must match &%auth_advertise_hosts%& (default *).
 .next
 .ilist
 The client host must match &%auth_advertise_hosts%& (default *).
 .next

-It the &%server_advertise_condition%& option is set, its expansion must not
+If the &%server_advertise_condition%& option is set, its expansion must not

 yield the empty string, &"0"&, &"no"&, or &"false"&.
 .endlist
 
 yield the empty string, &"0"&, &"no"&, or &"false"&.
 .endlist
 


@@ -27470,7 +27482,7 @@ encode '\0user@domain.com\0pas$$word'
 .endd
 gives an incorrect answer because of the unescaped &"@"& and &"$"& characters.
 
 .endd
 gives an incorrect answer because of the unescaped &"@"& and &"$"& characters.
 

-If you have the &%mimencode%& command installed, another way to do produce
+If you have the &%mimencode%& command installed, another way to produce

 base64-encoded strings is to run the command
 .code
 echo -e -n `\0user\0password' | mimencode
 base64-encoded strings is to run the command
 .code
 echo -e -n `\0user\0password' | mimencode


@@ -38300,8 +38312,11 @@ parentheses afterwards.
 When more than one address is included in a single delivery (for example, two
 SMTP RCPT commands in one transaction) the second and subsequent addresses are
 flagged with &`->`& instead of &`=>`&. When two or more messages are delivered
 When more than one address is included in a single delivery (for example, two
 SMTP RCPT commands in one transaction) the second and subsequent addresses are
 flagged with &`->`& instead of &`=>`&. When two or more messages are delivered

-down a single SMTP connection, an asterisk follows the IP address in the log
-lines for the second and subsequent messages.
+down a single SMTP connection, an asterisk follows the
+.new
+remote IP address (and port if enabled)
+.ewn
+in the log lines for the second and subsequent messages.

 When two or more messages are delivered down a single TLS connection, the
 DNS and some TLS-related information logged for the first message delivered
 will not be present in the log lines for the second and subsequent messages.
 When two or more messages are delivered down a single TLS connection, the
 DNS and some TLS-related information logged for the first message delivered
 will not be present in the log lines for the second and subsequent messages.


@@ -38668,6 +38683,7 @@ routing email addresses, but it does apply to &"byname"& lookups.
 client's ident port times out.
 .next
 .cindex "log" "incoming interface"
 client's ident port times out.
 .next
 .cindex "log" "incoming interface"

+.cindex "log" "outgoing interface"

 .cindex "log" "local interface"
 .cindex "log" "local address and port"
 .cindex "TCP/IP" "logging local address and port"
 .cindex "log" "local interface"
 .cindex "log" "local address and port"
 .cindex "TCP/IP" "logging local address and port"


@@ -38676,7 +38692,10 @@ client's ident port times out.
 to the &"<="& line as an IP address in square brackets, tagged by I= and
 followed by a colon and the port number. The local interface and port are also
 added to other SMTP log lines, for example, &"SMTP connection from"&, to
 to the &"<="& line as an IP address in square brackets, tagged by I= and
 followed by a colon and the port number. The local interface and port are also
 added to other SMTP log lines, for example, &"SMTP connection from"&, to

-rejection lines, and (despite the name) to outgoing &"=>"& and &"->"& lines.
+rejection lines, and (despite the name) to outgoing
+.new
+&"=>"&, &"->"&, &"=="& and &"**"& lines.
+.wen

 The latter can be disabled by turning off the &%outgoing_interface%& option.
 .next
 .cindex log "incoming proxy address"
 The latter can be disabled by turning off the &%outgoing_interface%& option.
 .next
 .cindex log "incoming proxy address"