+PH/01 The code for finding all the local interface addresses on a FreeBSD
+ system running IPv6 was broken. This may well have applied to all BSD
+ systems, as well as to others that have similar system calls. The broken
+ code found IPv4 interfaces correctly, but gave incorrect values for the
+ IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was
+ that it would not match correctly against @[] and not recognize the IPv6
+ addresses as local.
+
+PH/02 The ipliteral router was not recognizing addresses of the form user@
+ [ipv6:....] because it didn't know about the "ipv6:" prefix.
+
+PH/03 Added disable_ipv6.
+
+PH/04 Changed $reply_address to use the raw form of the headers instead of the
+ decoded form, because it is most often used to construct To: headers
+ lines in autoreplies, and the decoded form may well be syntactically
+ invalid. However, $reply_address has leading white space removed, and all
+ newlines turned into spaces so that the autoreply transport does not
+ grumble.
+
+PH/05 If group was specified without a user on a router, and no group or user
+ was specified on a transport, the group from the router was ignored.
+
+PH/06 Increased the number of ACL variables to 20 of each type, and arranged
+ for visible compile-time settings that can be used to change these
+ numbers, for those that want even more. Backwards compatibility with old
+ spool files has been maintained. However, going back to a previous Exim
+ release will lost any variables that are in spool files.
+
+PH/07 Two small changes when running in the test harness: increase delay when
+ passing a TCP/IP connection to a new process, in case the original
+ process has to generate a bounce, and remove special handling of
+ 127.0.0.2 (sic), which is no longer necessary.
+
+PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to
+ be the same on different OS.
+
+PH/09 Moved a debug statement in filter processing to avoid a race problem when
+ testing.
+
+JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:"
+ whether --show-vars was specified or not
+
+JJ/02 exipick: Added support for new ACL variable spool format introduced
+ in 4.61-PH/06
+
+PH/10 Fixed another bug related to PH/04 above: if an incoming message had a
+ syntactically invalid From: or Reply-to: line, and a filter used this to
+ generate an autoreply, and therefore failed to obtain an address for the
+ autoreply, Exim could try to deliver to a non-existent relative file
+ name, causing unrelated and misleading errors. What now happens is that
+ it logs this as a hard delivery error, but does not attempt to create a
+ bounce message.
+
+PH/11 The exinext utility has a -C option for testing purposes, but although
+ the given file was scanned by exinext itself; it wasn't being passed on
+ when Exim was called.
+
+PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as
+ an end-of-file indication when reading a command response.
+
+PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was
+ compiled. In many other places in Exim, IPv6 addresses are always
+ recognized, so I have changed this. It also means that IPv4 domain
+ literals of the form [IPV4:n.n.n.n] are now always recognized.
+
+PH/14 When a uid/gid is specified for the queryprogram router, it cannot be
+ used if the router is not running as root, for example, when verifying at
+ ACL time, or when using -bh. The debugging output from this situation was
+ non-existent - all you got was a failure to exec. I have made two
+ changes:
+
+ (a) Failures to set uid/gid, the current directory, or a process leader
+ in a subprocess such as that created by queryprogram now generate
+ suitable debugging ouput when -d is set.
+
+ (b) The queryprogram router detects when it is not running as root,
+ outputs suitable debugging information if -d is set, and then runs
+ the subprocess without attempting to change uid/gid.
+
+PH/15 Minor change to Makefile for building test_host (undocumented testing
+ feature).
+
+PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the
+ additional section of a DNS packet that returns MX or SRV records.
+ Instead, it always explicitly searches for A/AAAA records. This avoids
+ major problems that occur when a DNS server includes only records of one
+ type (A or AAAA) in an MX/SRV packet. A byproduct of this change has
+ fixed another bug: if SRV records were looked up and the corresponding
+ address records were *not* found in the additional section, the port
+ values from the SRV records were lost.
+
+PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not
+ using the correct key (the original address) when searching the retry
+ rules in order to find which one to use for generating the retry hint.
+
+
+
+Exim version 4.60
+-----------------
+
+PH/01 Two changes to the default runtime configuration:
+
+ (1) Move the checks for relay_from_hosts and authenticated clients from
+ after to before the (commented out) DNS black list checks.
+
+ (2) Add control=submission to the relay_from_hosts and authenticated
+ clients checks, on the grounds that messages accepted by these
+ statements are most likely to be submissions.
+
+PH/02 Several tidies to the handling of ${prvs and ${prvscheck:
+
+ (1) Generate an error if the third argument for the ${prvs expansion is
+ not a single digit.
+
+ (2) Treat a missing third argument of ${prvscheck as if it were an empty
+ string.
+
+ (3) Reset the variables that are obtained from the first argument of
+ ${prvscheck and used in the second argument before leaving the code,
+ because their memory is reclaimed, so using them afterwards may do
+ silly things.
+
+ (4) Tidy up the code for expanding the arguments of ${prvscheck one by
+ one (it's much easier than Tom thought :-).
+
+ (5) Because of (4), we can now allow for the use of $prvscheck_result
+ inside the third argument.
+
+PH/03 For some reason, the default setting of PATH when running a command from
+ a pipe transport was just "/usr/bin". I have changed it to
+ "/bin:/usr/bin".
+
+PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause
+ anything to be listed in the output from -bV.
+
+PH/05 When a filter generated an autoreply, the entire To: header line was
+ quoted in the delivery log line, like this:
+
+ => >A.N.Other <ano@some.domain> <original@ddress> ...
+
+ This has been changed so that it extracts the operative address. There
+ may be more than one such address. If so, they are comma-separated, like
+ this:
+
+ => >ano@some.domain,ona@other.domain <original@ddress> ...
+
+PH/06 When a client host used a correct literal IP address in a HELO or EHLO
+ command, (for example, EHLO [1.2.3.4]) and the client's IP address was
+ not being looked up in the rDNS to get a host name, Exim was showing the
+ IP address twice in Received: lines, even though the IP addresses were
+ identical. For example:
+
+ Received: from [1.2.3.4] (helo=[1.2.3.4])
+
+ However, if the real host name was known, it was omitting the HELO data
+ if it matched the actual IP address. This has been tidied up so that it
+ doesn't show the same IP address twice.
+
+PH/07 When both +timestamp and +memory debugging was on, the value given by
+ $tod_xxx expansions could be wrong, because the tod_stamp() function was
+ called by the debug printing, thereby overwriting the timestamp buffer.
+ Debugging no longer uses the tod_stamp() function when +timestamp is set.
+
+PH/08 When the original message was included in an autoreply transport, it
+ always said "this is a copy of the message, including all the headers",
+ even if body_only or headers_only was set. It now gives an appropriate
+ message.
+
+PH/09 Applied a patch from the Sieve maintainer which:
+
+ o fixes some comments
+ o adds the (disabled) notify extension core
+ o adds some debug output for the result of if/elsif tests
+ o points to the current vacation draft in the documentation
+ and documents the missing references header update
+
+ and most important:
+
+ o fixes a bug in processing the envelope test (when testing
+ multiple envelope elements, the last element determinted the
+ result)
+
+PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to
+ Electronic Mail") by including:
+
+ Auto-submitted: auto-generated
+
+ in the messages that it generates (bounce messages and others, such as
+ warnings). In the case of bounce messages for non-SMTP mesages, there was
+ also a typo: it was using "Auto_submitted" (underscore instead of
+ hyphen). Since every message generated by Exim is necessarily in response
+ to another message, thes have all been changed to:
+
+ Auto-Submitted: auto-replied
+
+ in accordance with these statements in the RFC:
+
+ The auto-replied keyword:
+
+ - SHOULD be used on messages sent in direct response to another
+ message by an automatic process,
+
+ - MUST NOT be used on manually-generated messages,
+
+ - MAY be used on Delivery Status Notifications (DSNs) and Message
+ Disposition Notifications (MDNs),
+
+ - MUST NOT be used on messages generated by automatic or periodic
+ processes, except for messages which are automatic responses to
+ other messages.
+
+PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}"
+ to the default Received: header definition.
+
+PH/12 Added log selector acl_warn_skipped (default on).
+
+PH/13 After a successful wildlsearch lookup, discard the values of numeric
+ variables because (a) they are in the wrong storage pool and (b) even if
+ they were copied, it wouldn't work properly because of the caching.
+
+PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length
+ checking when decoding. Apparently there are clients that generate
+ overlong encoded strings. Why am I not surprised?
+
+PH/15 If the first argument of "${if match_address" was not empty, but did not
+ contain an "@" character, Exim crashed. Now it writes a panic log message
+ and treats the condition as false.
+
+PH/16 In autoreply, treat an empty string for "once" the same as unset.
+
+PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve
+ extension "envelope-auth". The code is finished and in agreement with
+ other implementations, but there is no documentation so far and in fact,
+ nobody wrote the draft yet. This extension is currently #undef'ed, thus
+ not changing the active code.
+
+ Print executed "if" and "elsif" statements when debugging is used. This
+ helps a great deal to understand what a filter does.
+
+ Document more things not specified clearly in RFC3028. I had all this
+ sorted out, when out of a sudden new issues came to my mind. Oops."
+
+PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists
+ (Bugzilla #53).
+
+PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated
+ canonical form (as documented). However, after a host name lookup from
+ the IP address, check_host() was doing a simple string comparison with
+ addresses acquired from the DNS when checking that the found name did
+ have the original IP as one of its addresses. Since any found IPv6
+ addresses are likely to be in abbreviated form, the comparison could
+ fail. Luckily, there already exists a function for doing the comparison
+ by converting both addresses to binary, so now that is used instead of
+ the text comparison.
+
+PH/20 There was another similar case to PH/19, when a complete host name was
+ given in a host list; looking up its IP address could give an abbreviated
+ form, whereas the current host's name might or might not be abbreviated.
+ The same fix has been applied.
+
+
+Exim version 4.54
+-----------------
+
+PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was
+ set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not.
+ It now does.
+
+PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on
+ the CVS lines, and there was a missing #if HAVE_IPV6 in host.c.
+
+PH/03 Typo: missing ".o" in src/pcre/Makefile.
+
+PH/04 Tighten up "personal" tests: Instead of testing for any "List-"
+ header line, restrict the check to what is listed in RFCs 2369 and 2929.
+ Also, for "Auto-Submitted", treat anything other than "no" as
+ non-personal, in accordance with RFC 3834. (Previously it treated
+ anything starting "auto-" as non-personal.)
+
+TF/01 The control=submission/name=... option had a problem with syntax
+ errors if the name included a slash character. The /name= option
+ now slurps the rest of the string, so it can include any characters
+ but it must come last in the list of options (after /sender_retain
+ or /domain=).
+
+PH/05 Some modifications to the interface to the fake nameserver for the new
+ testing suite.
+
+
+
+Exim version 4.53
+-----------------
+
+TK/01 Added the "success_on_redirect" address verification option. See
+ NewStuff for rationale and an example.
+
+PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
+
+PH/02 Patch to exigrep to allow it to work on syslog lines.
+
+PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
+ fread() to skip over the body file's header line, because in Cygwin the
+ header line is locked and is inaccessible.
+
+PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
+ co-exist for some time) to make it clear that it is the Exim ID that is
+ referenced, not the Message-ID: header line.
+
+PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
+ string_format() function, because snprintf() does not exist on all
+ operating systems.
+
+PH/06 The use of forbid_filter_existstest now also locks out the use of the
+ ${stat: expansion item.
+
+PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
+ protocol synchronization error", to keep the pedants happy.
+
+PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
+ well as for IRIX systems, when gcc is being used. See the host.c source
+ file for comments.
+
+PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
+
+PH/10 Named domain lists were not working if used in a queue_smtp_domains
+ setting.
+
+PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
+ transport and to the smtp transport in LMTP mode.
+
+TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
+
+PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
+ run a filter in a subprocess. This could lead to confusion in subsequent
+ lookups in the parent process. There should also be a search_tidyup() at
+ the end of the subprocess.
+
+PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
+ only if the host matched helo_try_verify_hosts, which caused the
+ verification to occur when the EHLO/HELO command was issued. The ACL just
+ tested the remembered result. Now, if a previous verification attempt has
+ not happened, "verify = helo" does it there and then.
+
+JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
+
+TK/03 Fix log output including CR from clamd.
+
+PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
+ exist provoked a memory error which could cause a segfault.
+
+PH/15 Installed PCRE 6.2
+
+PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
+
+PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
+ of the problem. Specifically, suggested +O2 rather than +O1 for the
+ HP-UX compiler.
+
+PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
+
+PH/20 If a delivery was routed to a non-standard port by means of an SRV
+ record, the port was not correctly logged when the outgoing_port log
+ selector was set (it logged the transort's default port).
+
+PH/21 Added support for host-specific ports to manualroute, queryprogram,
+ fallback_hosts, and "hosts" in the smtp transport.
+
+PH/22 If the log selector "outgoing_port" is set, the port is now also given on
+ host errors such as "Connection refused".
+
+PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
+ authentication with radiusclient 0.4.9:
+
+ - Error returned from rc_read_config was caught wrongly
+ - Username/password not passed on to radius server due to wrong length.
+
+ The presumption is that some radiusclient API changes for 4.51/PH/17
+ were not taken care of correctly. The code is still untested by me (my
+ Linux distribution still has 0.3.2 of radiusclient), but it was
+ contributed by a Radius user.
+
+PH/24 When doing a callout, the value of $domain wasn't set correctly when
+ expanding the "port" option of the smtp transport.
+
+TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
+ while reading a MIME header. Thanks to Tom Hughes for a patch.
+
+PH/24 Include config.h inside local_scan.h so that configuration settings are
+ available.
+
+PH/25 Make $smtp_command_argument available after all SMTP commands. This means
+ that in an ACL for RCPT (for example), you can examine exactly what was
+ received.
+
+PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
+ commands, but it was not correctly comparing the address with the actual
+ client host address. Thus, it would show the EHLO address in Received:
+ header lines when this was not necessary.
+
+PH/27 Added the % operator to ${eval:}.
+
+PH/28 Exim tries to create and chdir to its spool directory when it starts;
+ it should be ignoring failures (because with -C, for example, it has lost
+ privilege). It wasn't ignoring creation failures other than "already
+ exists".
+
+PH/29 Added "crypteq" to the list of supported features that Exim outputs when
+ -bV or -d is used.
+
+PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed
+ because an input line was too long, either on its own, or by virtue of
+ too many continuations, the temporary file was not being removed, and the
+ return code was incorrect.
+
+PH/31 Missing "BOOL" in function definition in filtertest.c.
+
+PH/32 Applied Sieve patches from the maintainer.
+
+TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67.
+
+PH/33 Added "verify = not_blind".
+
+PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in
+ Local/Makefile (with some defaults set). These are used in built scripts
+ such as exicyclog, but they have never been used in the exim_install
+ script (though there are many overriding facilities there). I have
+ arranged that the exim_install script now takes note of these two
+ settings.
+
+PH/35 Installed configuration files for Dragonfly.
+
+PH/36 When a locally submitted message by a trusted user did not contain a
+ From: header, and the sender address was obtained from -f or from an SMTP
+ MAIL command, and the trusted user did not use -F to supply a sender
+ name, $originator_name was incorrectly used when constructing a From:
+ header. Furthermore, $originator_name was used for submission mode
+ messages from external hosts without From: headers in a similar way,
+ which is clearly wrong.
+
+PH/37 Added control=suppress_local_fixups.
+
+PH/38 When log_selector = +received_sender was set, and the addition of the
+ sender made the log line's construction buffer exactly full, or one byte
+ less than full, an overflow happened when the terminating "\n" was
+ subsequently added.
+
+PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry
+ when the result of a list match is failure because a DNS lookup failed.
+
+PH/40 RM_COMMAND is now used in the building process.
+
+PH/41 Added a "distclean" target to the top-level Makefile; it deletes all
+ the "build-* directories that it finds.
+
+PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP
+ address in a domain literal was a prefix of an interface address.
+
+PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains
+ when verifying a sender address, unless rewrite_headers is false.
+
+PH/44 Wrote a long comment about why errors_to addresses are verified as
+ recipients, not senders.
+
+TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when
+ the ratelimit ACL was added.
+
+PH/45 Added $smtp_command for the full command (cf $smtp_command_argument).
+
+PH/46 Added extra information about PostgreSQL errors to the error string.
+
+PH/47 Added an interface to a fake DNS resolver for use by the new test suite,
+ avoiding the need to install special zones in a real server. This is
+ backwards compatible; if it can't find the fake resolver, it drops back.
+ Thus, both old and new test suites can be run.
+
+TF/02 Added util/ratelimit.pl
+
+TF/03 Minor fix to the ratelimit code to improve its behaviour in case the
+ clock is set back in time.
+
+TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian
+ Candler <B.Candler@pobox.com>.
+
+TF/05 The fix for PH/43 was not completely correct; widen_domains is always
+ OK for addresses that are the result of redirections.
+
+PH/48 A number of further additions for the benefit of the new test suite,
+ including a fake gethostbyname() that interfaces to the fake DNS resolver
+ (see PH/47 above).
+
+TF/06 The fix for widen_domains has also been applied to qualify_single and
+ search_parents which are the other dnslookup options that can cause
+ header rewrites.
+
+PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter
+ type ("H").
+
+PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable.
+
+TF/07 Exim produced the error message "an SRV record indicated no SMTP
+ service" if it encountered an MX record with an empty target hostname.
+ The message is now "an MX or SRV record indicated no SMTP service".
+
+TF/08 Change PH/13 introduced the possibility that verify=helo may defer,
+ if the DNS of the sending site is misconfigured. This is quite a
+ common situation. This change restores the behaviour of treating a
+ helo verification defer as a failure.
+
+PH/51 If self=fail was set on a router, the bounce message did not include the
+ actual error message.
+
+
+Exim version 4.52
+-----------------
+
+TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
+
+PH/01 When a transport filter timed out in a pipe delivery, and the pipe
+ command itself ended in error, the underlying message about the transport
+ filter timeout was being overwritten with the pipe command error. Now the
+ underlying error message should be appended to the second error message.
+
+TK/01 Fix poll() being unavailable on Mac OSX 10.2.
+
+PH/02 Reduce the amount of output that "make" produces by default. Full output
+ can still be requested.
+
+PH/03 The warning log line about a condition test deferring for a "warn" verb
+ was being output only once per connection, rather than after each
+ occurrence (because it was using the same function as for successful
+ "warn" verbs). This seems wrong, so I have changed it.
+
+TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
+ it should not have, which might have caused a crash in the right
+ circumstances, but probably never did.
+
+PH/04 Installed a modified version of Tony Finch's patch to make submission
+ mode fix the return path as well as the Sender: header line, and to
+ add a /name= option so that you can make the user's friendly name appear
+ in the header line.
+
+TF/03 Added the control = fakedefer ACL modifier.
+
+TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
+ Mark Lowes for thorough testing.
+
+TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
+
+TK/03 Merged latest SRS patch from Miles Wilton.
+
+PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
+ with the definition in sysexits.h (which is #included earlier).
+ Fortunately, Exim does not actually use EX_OK. The code used to try to
+ preserve the sysexits.h value, by assumimg that macro definitions were
+ scanned for macro replacements. I have been disabused of this notion,
+ so now the code just undefines EX_OK before #including unistd.h.
+
+PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
+ in the smtp transport. When a block could not be written in a single
+ write() function, the timeout was being re-applied to each part-write.
+ This seems wrong - if the receiver was accepting one byte at a time it
+ would take for ever. The timeout is now adjusted when this happens. It
+ doesn't have to be particularly precise.
+
+TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
+ details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
+
+PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
+ without a domain if the check to <postmaster@domain> fails.
+
+SC/01 Eximstats: added -xls and the ability to specify output files
+ (patch written by Frank Heydlauf).
+
+SC/02 Eximstats: use FileHandles for outputing results.
+
+SC/03 Eximstats: allow any combination of xls, txt, and html output.
+
+SC/04 Eximstats: fixed display of large numbers with -nvr option
+
+SC/05 Eximstats: fixed merging of reports with empty tables.
+
+SC/06 Eximstats: added the -include_original_destination flag
+
+SC/07 Eximstats: removed tabs and trailing whitespace.
+
+TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
+
+TK/06 MBOX spool code: Add real "From " MBOX separator line
+ so the .eml file is really in mbox format (even though
+ most programs do not really care). Patch from Alex Miller.
+
+TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
+ The latter is generated from $received_to and is only set if the
+ message has one envelope recipient. SA can use these headers,
+ obviously out-of-the-box. Patch from Alex Miller.
+
+PH/08 The ${def test on a variable was returning false if the variable's
+ value was "0", contrary to what the specification has always said!
+ The result should be true unless the variable is empty.
+
+PH/09 The syntax error of a character other than { following "${if
+ def:variable_name" (after optional whitespace) was not being diagnosed.
+ An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
+ accidental colon was present, for example, could give incorrect results.
+
+PH/10 Tidied the code in a number of places where the st_size field of a stat()
+ result is used (not including appendfile, where other changes are about
+ to be made).
+
+PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
+ This involved changing a lot of size variables from int to off_t. It
+ should work with maildirs and everything.
+
+TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
+ spamd dying while we are connected to it.
+
+TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
+ <jgh@wizmail.org>
+
+PH/12 Applied Alex Kiernan's patch for the API change for the error callback
+ function for BDB 4.3.
+
+PH/13 Changed auto_thaw such that it does not apply to bounce messages.
+
+PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
+ the sources for PCRE have been re-arranged and more files are now
+ involved.
+
+PH/15 The code I had for printing potentially long long variables in PH/11
+ above was not the best (it lost precision). The length of off_t variables
+ is now inspected at build time, and an appropriate printing format (%ld
+ or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T
+ to be "long long int" or "long int". This is needed for the internal
+ formatting function string_vformat().
+
+PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
+ the configuration file to be ":syslog", then the script "guesses" where
+ the logs files are, rather than using the compiled in default. In our
+ case the guess is not the same as the compiled default, so the script
+ suddenly stopped working when I started to use syslog. The patch checks
+ to see if log_file_path is "". If so, it attempts to read it from exim
+ with no configuration file to get the compiled in version, before it
+ falls back to the previous guessing code."
+
+TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
+ implementing BATV in an Exim configuration. See NewStuff for the gory
+ details.
+
+PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
+ Makefile that are specific to HP-UX.
+
+PH/18 If the "use_postmaster" option was set for a recipient callout together
+ with the "random" option, the postmaster address was used as the MAIL
+ FROM address for the random test, but not for the subsequent recipient
+ test. It is now used for both.
+
+PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
+ patch removes a few documentation additions to RFC 3028, because the
+ latest draft now contains them. It adds the new en;ascii-case comparator
+ and a new error check for 8bit text in MIME parts. Comparator and
+ require names are now matched exactly. I enabled the subaddress
+ extension, but it is not well tested yet (read: it works for me)."
+
+PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
+ rework some of the code of TK/09 above to avoid the hardwired use of
+ "%lld" and "long long". Replaced the call to snprintf() with a call to
+ string_vformat().
+
+PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX
+ records point to non-existent hosts", "retry timeout exceeded", and
+ "retry time not reached for any host after a long failure period".
+
+PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
+ experimental DomainKeys support:
+
+ (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
+ (2) On an error such as an illegally used "control", the wrong name for
+ the control was given.
+
+ These problems did NOT occur unless DomainKeys support was compiled.
+
+PH/23 Added daemon_startup_retries and daemon_startup_sleep.
+
+PH/24 Added ${if match_ip condition.
+
+PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
+ databases so that it will be absolutely obvious if a crash occurs in the
+ DB library. This is a regular occurrence (often caused by mis-matched
+ db.h files).
+
+PH/26 Insert a lot of missing (void) casts for functions such as chown(),
+ chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
+ picked up on a user's system that detects such things. There doesn't seem
+ to be a gcc warning option for this - only an attribute that has to be
+ put on the function's prototype. It seems that in Fedora Core 4 they have
+ set this on a number of new functions. No doubt there will be more in due
+ course.
+
+PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
+ specify a transport. However, if an address that was verified by such a
+ router was the subject of a callout, Exim crashed because it tried to
+ read the rcpt_include_affixes from the non-existent transport. Now it
+ just assumes that the setting of that option is false. This bug was
+ introduced by 4.51/PH/31.
+
+PH/28 Changed -d+all to exclude +memory, because that information is very
+ rarely of interest, but it makes the output a lot bigger. People tend to
+ do -d+all out of habit.
+
+PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
+ code in os-type was giving problems when libc.so lives in lib64, like on
+ x86_64 Fedora Core.
+
+PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
+ aren't the modern standard, and it seems that some systems' include files
+ don't always have them. Exim was already checking for some of the newer
+ ones like T_AAAA, and defining it itself. I've added checks for all the
+ record types that Exim uses.
+
+PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was
+ not automatically generating a new one, as it is supposed to. This
+ prevented TLS from working. If the file did exist, but contained invalid
+ data, a new version was generated, as expected. It was only the case of a
+ non-existent file that was broken.
+
+TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
+ with a change in libdomainkeys > 0.64.
+
+TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
+ from DNS. If the selector record carries the flag, it now has
+ precedence over the domain-wide flag.
+
+TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
+
+PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as
+ the use of a port name that isn't defined in /etc/services) occurred, the
+ message was deferred as in a normal delivery, and thus remained on the
+ spool, instead of being failed because of the mua_wrapper setting. This
+ is now fixed, and I tidied up some of the mua_wrapper messages at the
+ same time.
+
+SC/08 Eximstats: whilst parsing the mainlog(s), store information about
+ the messages in a hash of arrays rather than using individual hashes.
+ This is a bit cleaner and results in dramatic memory savings, albeit
+ at a slight CPU cost.
+
+SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
+ as requested by Marc Sherman.
+
+SC/10 Eximstats: added histograms for user specified patterns as requested
+ by Marc Sherman.
+
+SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified.
+
+PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of
+ fopen() in the content-scanning modules that did not already have it.
+
+
+Exim version 4.51
+-----------------
+
+TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
+ doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
+
+TK/02 Fix ACL "control" statement not being available in MIME ACL.
+
+TK/03 Fix ACL "regex" condition not being available in MIME ACL.
+
+PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
+ to test Sieve filters that use "vacation".
+
+PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
+ that changes the way the GnuTLS parameters are stored in the cache file.
+ The new format can be generated externally. For backward compatibility,
+ if the data in the cache doesn't make sense, Exim assumes it has read an
+ old-format file, and it generates new data and writes a new file. This
+ means that you can't go back to an older release without removing the
+ file.
+
+PH/03 A redirect router that has both "unseen" and "one_time" set does not
+ work if there are any delivery delays because "one_time" forces the
+ parent to be marked "delivered", so its unseen clone is never tried
+ again. For this reason, Exim now forbids the simultaneous setting of
+ these two options.
+
+PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
+ redirected to themselves ("homonym" addresses). Read the long ChangeLog
+ entry if you want to know the details. The fix, however, neglected to
+ consider the case when local delivery batching is involved. The test for
+ "previously delivered" was not happening when checking to see if an
+ address could be batched with a previous (undelivered) one; under
+ certain circumstances this could lead to multiple deliveries to the same
+ address.
+
+PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
+ in its include files, and this causes problems building Exim.
+
+PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
+ header_syntax) but Exim was just ignoring anything given after a slash.
+ In particular, this caused confusion with an attempt to use "verify =
+ reverse_host_lookup/defer_ok". An error is now given when options are
+ supplied for verify items that do not have them. (Maybe reverse_host_
+ lookup should have a defer_ok option, but that's a different point.)
+
+PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
+ defined by RFC 821) to 2048, because there were problems with some AUTH
+ commands, and RFC 1869 says the size should be increased for extended
+ SMTP commands that take arguments.
+
+PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
+ Finch).
+
+PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
+ "unknown" error; now it says that the functionality isn't in the binary.
+
+PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
+ an address' error message when a string expansion fails (syntax or
+ whatever). Otherwise the password may appear in the log. Following change
+ PH/42 below, there is no longer a chance of it appearing in a bounce
+ message.
+
+PH/11 Installed exipick version 20050225.0 from John Jetmore.
+
+PH/12 If the last host in a fallback_hosts list was multihomed, only the first
+ of its addresses was ever tried. (Bugzilla bug #2.)
+
+PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
+ the result incorrectly in the debug output. (It correctly added a newline
+ to what was transported.)
+
+TF/01 Added $received_time.
+
+PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
+ commented out examples of how to interface to a virus scanner and to
+ SpamAssassin. Also added commented examples of av_scanner and
+ spamd_address settings.
+
+PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
+ and controls are allowed in which ACLs. There were a couple of minor
+ errors. Some of the entries in the conditions table (which is a table of
+ where they are NOT allowed) were getting very unwieldy; rewrote them as a
+ negation of where the condition IS allowed.
+
+PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
+
+PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
+ header file does not have a version number, so I've had to invent a new
+ value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
+ API. The code is untested by me (my Linux distribution still has 0.3.2 of
+ radiusclient), but it was contributed by a Radius user.
+
+PH/18 Installed Lars Mainka's patch for the support of CRL collections in
+ files or directories, for OpenSSL.
+
+PH/19 When an Exim process that is running as root has to create an Exim log
+ file, it does so in a subprocess that runs as exim:exim so as to get the
+ ownership right at creation (otherwise, other Exim processes might see
+ the file with the wrong ownership). There was no test for failure of this
+ fork() call, which would lead to the process getting stuck as it waited
+ for a non-existent subprocess. Forks do occasionally fail when resources
+ run out. I reviewed all the other calls to fork(); they all seem to check
+ for failure.
+
+PH/20 When checking for unexpected SMTP input at connect time (before writing
+ the banner), Exim was not dealing correctly with a non-positive return
+ from the read() function. If the client had disconnected by this time,
+ the result was a log entry for a synchronization error with an empty
+ string after "input=" when read() returned zero. If read() returned -1
+ (an event I could not check), uninitialized data bytes were printed.
+ There were reports of junk text (parts of files, etc) appearing after
+ "input=".
+
+PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
+
+PH/22 Added support for macro redefinition, and (re)definition in between
+ driver and ACL definitions.
+
+PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
+ forgetting to use the resulting value; it was using the unexpanded value.
+
+PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
+ hadn't been configured. The fix is from Juergen Kreileder, who
+ understands it better than I do:
+
+ "Here's what I see happening with three configured cyrus_sasl
+ authenticators configured (plain, login, cram-md5):
+
+ On startup auth_cyrus_sasl_init() gets called for each of these.
+ This means three calls to sasl_listmech() without a specified mech_list.
+ => SASL tests which mechs of all available mechs actually work
+ => three warnings about OTP not working
+ => the returned list contains: plain, login, cram-md5, digest-md5, ...
+
+ With the patch, sasl_listmech() also gets called three times. But now
+ SASL's mech_list option is set to the server_mech specified in the the
+ authenticator. Or in other words, the answer from sasl_listmech()
+ gets limited to just the mech you're testing for (which is different
+ for each call.)
+ => the return list contains just 'plain' or 'login', 'cram-md5' or
+ nothing depending on the value of ob->server_mech.
+
+ I've just tested the patch: Authentication still works fine,
+ unavailable mechs specified in the exim configuration are still
+ caught, and the auth.log warnings about OTP are gone."
+
+PH/25 When debugging is enabled, the contents of the command line are added
+ to the debugging output, even when log_selector=+arguments is not
+ specified.
+
+PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
+ answer is "GNU", and only if the return is "GNU/something" is the answer
+ "Linux".
+
+PH/27 $acl_verify_message is now set immediately after the failure of a
+ verification in an ACL, and so is available in subsequent modifiers. In
+ particular, the message can be preserved by coding like this:
+
+ warn !verify = sender
+ set acl_m0 = $acl_verify_message
+
+ Previously, $acl_verify_message was set only while expanding "message"
+ and "log_message" when a very denied access.
+
+PH/28 Modified OS/os.c-Linux with
+
+ -#ifndef OS_LOAD_AVERAGE
+ +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
+
+ to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
+ nomenclature these days.)
+
+PH/29 Installed patch from the Sieve maintainer that adds the options
+ sieve_useraddress and sieve_subaddress to the redirect router.
+
+PH/30 In these circumstances:
+ . Two addresses routed to the same list of hosts;
+ . First host does not offer TLS;
+ . First host accepts first address;
+ . First host gives temporary error to second address;
+ . Second host offers TLS and a TLS session is established;
+ . Second host accepts second address.
+ Exim incorrectly logged both deliveries with the TLS parameters (cipher
+ and peerdn, if requested) that were in fact used only for the second
+ address.
+
+PH/31 When doing a callout as part of verifying an address, Exim was not paying
+ attention to any local part prefix or suffix that was matched by the
+ router that accepted the address. It now behaves in the same way as it
+ does for delivery: the affixes are removed from the local part unless
+ rcpt_include_affixes is set on the transport.
+
+PH/32 Add the sender address, as F=<...>, to the log line when logging a
+ timeout during the DATA phase of an incoming message.
+
+PH/33 Sieve envelope tests were broken for match types other than :is. I have
+ applied a patch sanctioned by the Sieve maintainer.
+
+PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
+ the uid or gid is negative. A case of a negative gid caused this to be
+ noticed. The fix allows for either to be negative.
+
+PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
+ clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
+ overlooked.
+
+PH/36 The change PH/12 above was broken. Fixed it.
+
+PH/37 Exim used to check for duplicate addresses in the middle of routing, on
+ the grounds that routing the same address twice would always produce the
+ same answer. This might have been true once, but it is certainly no
+ longer true now. Routing a child address may depend on the previous
+ routing that produced that child. Some complicated redirection strategies
+ went wrong when messages had multiple recipients, and made Exim's
+ behaviour dependent on the order in which the addresses were given.
+
+ I have moved the duplicate checking until after the routing is complete.
+ Exim scans the addresses that are assigned to local and remote
+ transports, and removes any duplicates. This means that more work will be
+ done, as duplicates will always all be routed, but duplicates are
+ presumably rare, so I don't expect this is of any significance.
+
+ For deliveries to pipes, files, and autoreplies, the duplicate checking
+ still happens during the routing process, since they are not going to be
+ routed further.
+
+PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
+ It corrects a timeout issue with spamd. This is Ian's comment: "The
+ background is that sometimes spamd either never reads data from a
+ connection it has accepted, or it never writes response data. The exiscan
+ spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
+ blindly assumes that writes won't block so it may never time out."
+
+PH/39 Allow G after quota size as well as K and M.
+
+PH/40 The value set for $authenticated_id in an authenticator may not contain
+ binary zeroes or newlines because the value is written to log lines and
+ to spool files. There was no check on this. Now the value is run through
+ the string_printing() function so that such characters are converted to
+ printable escape sequences.
+
+PH/41 $message_linecount is a new variable that contains the total number of
+ lines in the message. Compare $body_linecount, which is the count for the
+ body only.
+
+PH/42 Exim no longer gives details of delivery errors for specific addresses in
+ bounce and delay warning messages, except in certain special cases, which
+ are as follows:
+
+ (a) An SMTP error message from a remote host;
+ (b) A message specified in a :fail: redirection;
+ (c) A message specified in a "fail" command in a system filter;
+ (d) A message specified in a FAIL return from the queryprogram router;
+ (e) A message specified by the cannot_route_message router option.
+
+ In these cases only, Exim does include the error details in bounce and
+ warning messages. There are also a few cases where bland messages such
+ as "unrouteable address" or "local delivery error" are given.
+
+PH/43 $value is now also set for the "else" part of a ${run expansion.
+
+PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
+ being worked on, but at least Exim now implements the latest version to
+ play with."
+
+PH/45 In a pipe transport, although a timeout while waiting for the pipe
+ process to complete was treated as a delivery failure, a timeout while
+ writing the message to the pipe was logged, but erroneously treated as a
+ successful delivery. Such timeouts include transport filter timeouts. For
+ consistency with the overall process timeout, these timeouts are now
+ treated as errors, giving rise to delivery failures by default. However,
+ there is now a new Boolean option for the pipe transport called
+ timeout_defer, which, if set TRUE, converts the failures into defers for
+ both kinds of timeout. A transport filter timeout is now identified in
+ the log output.
+
+PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
+ systems where "make" and "gmake" are different, calling "gmake" at top
+ level broke things. I've arranged for the value of $(MAKE) to be passed
+ from the Makefile to this script so that it can call the same version of
+ "make".
+
+
+A note about Exim versions 4.44 and 4.50
+----------------------------------------
+
+Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
+changes of various kinds. As a consequence, a big documentation update was
+needed. This delayed the release for rather longer than seemed good, especially
+in the light of a couple of (minor) security issues. Therefore, the changes
+that fixed bugs were backported into 4.43, to create a 4.44 maintenance
+release. So 4.44 and 4.50 are in effect two different branches that both start
+from 4.43.
+
+I have left the 4.50 change log unchanged; it contains all the changes since
+4.43. The change log for 4.44 is below; many of its items are identical to
+those for 4.50. This seems to be the most sensible way to preserve the
+historical information.
+
+
+Exim version 4.50
git://git.exim.org / users / heiko / exim.git / blobdiff