.cindex "tainted data" "de-tainting"
Note that this is commonly untainted
(depending on the way the list was created).
+Specifically, explicit text in the configuration file in not tainted.
This is a useful way of obtaining an untainted equivalent to
the domain, for later operations.
+
+However if the list (including one-element lists)
+is created by expanding a variable containing tainted data,
+it is tainted and so will the match value be.
.endlist
.cindex "tainted data"
If the origin of the data is an incoming message,
-the result of expanding this variable is tainted.
-When in untainted version is needed, one should be obtained from
+the result of expanding this variable is tainted and may not
+be further expanded or used as a filename.
+When an untainted version is needed, one should be obtained from
looking up the value in a local (therefore trusted) database.
Often &$domain_data$& is usable in this role.
.vitem &$domain_data$&
.vindex "&$domain_data$&"
-When the &%domains%& option on a router matches a domain by
-means of a lookup, the data read by the lookup is available during the running
-of the router as &$domain_data$&. In addition, if the driver routes the
+When the &%domains%& condition on a router
+.new
+or an ACL
+matches a domain
+against a list, the match value is copied to &$domain_data$&.
+This is an enhancement over previous versions of Exim, when it only
+applied to the data read by a lookup.
+For details on match values see section &<<SECTlistresults>>& et. al.
+.wen
+
+If the router routes the
address to a transport, the value is available in that transport. If the
transport is handling multiple addresses, the value from the first address is
used.
-&$domain_data$& is also set when the &%domains%& condition in an ACL matches a
-domain by means of a lookup. The data read by the lookup is available during
-the rest of the ACL statement. In all other situations, this variable expands
-to nothing.
+&$domain_data$& set in an ACL is available during
+the rest of the ACL statement.
.vitem &$exim_gid$&
.vindex "&$exim_gid$&"
.cindex "tainted data"
If the origin of the data is an incoming message,
-the result of expanding this variable is tainted.
+the result of expanding this variable is tainted and
+may not be further expanded or used as a filename.
&*Warning*&: the content of this variable is usually provided by a potential
attacker.
.vitem &$local_part_data$&
.vindex "&$local_part_data$&"
-When the &%local_parts%& option on a router matches a local part by means of a
-lookup, the data read by the lookup is available during the running of the
-router as &$local_part_data$&. In addition, if the driver routes the address
-to a transport, the value is available in that transport. If the transport is
-handling multiple addresses, the value from the first address is used.
+When the &%local_parts%& condition on a router or ACL
+matches a local part list
+.new
+the match value is copied to &$local_part_data$&.
+This is an enhancement over previous versions of Exim, when it only
+applied to the data read by a lookup.
+For details on match values see section &<<SECTlistresults>>& et. al.
+.wen
The &%check_local_user%& router option also sets this variable.
-&$local_part_data$& is also set when the &%local_parts%& condition in an ACL
-matches a local part by means of a lookup. The data read by the lookup is
-available during the rest of the ACL statement. In all other situations, this
-variable expands to nothing.
-
.vindex &$local_part_prefix$& &&&
&$local_part_prefix_v$& &&&
&$local_part_suffix$& &&&
.vindex "&$tls_in_sni$&"
.vindex "&$tls_sni$&"
.cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI "observability on server"
When a TLS session is being established, if the client sends the Server
Name Indication extension, the value will be placed in this variable.
If the variable appears in &%tls_certificate%& then this option and
.vitem &$tls_out_sni$&
.vindex "&$tls_out_sni$&"
.cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI "observability in client"
During outbound
SMTP deliveries, this variable reflects the value of the &%tls_sni%& option on
the transport.
.option syslog_timestamp main boolean true
.cindex "syslog" "timestamps"
+.cindex timestamps syslog
If &%syslog_timestamp%& is set false, the timestamps on Exim's log lines are
omitted when these lines are sent to syslog. See chapter &<<CHAPlog>>& for
details of Exim's logging.
file is used, the &$tls_in_ourcert$& variable is unreliable.
The macro "_TLS_BAD_MULTICERT_IN_OURCERT" will be defined for those versions.
+.cindex SNI "selecting server certificate based on"
If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then
if the OpenSSL build supports TLS extensions and the TLS client sends the
Server Name Indication extension, then this option and others documented in
.option tls_sni smtp string&!! unset
.cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI "setting in client"
.vindex "&$tls_sni$&"
If this option is set then it sets the $tls_out_sni variable and causes any
TLS session to pass this value as the Server Name Indication extension to
or need not succeed respectively.
The &%tls_verify_cert_hostnames%& option lists hosts for which additional
-checks are made: that the host name (the one in the DNS A record)
-is valid for the certificate.
+name checks are made on the server certificate.
+.new
+The match against this list is, as per other Exim usage, the
+IP for the host. That is most closely associated with the
+name on the DNS A (or AAAA) record for the host.
+However, the name that needs to be in the certificate
+is the one at the head of any CNAME chain leading to the A record.
+.wen
The option defaults to always checking.
The &(smtp)& transport has two OCSP-related options:
.section "Use of TLS Server Name Indication" "SECTtlssni"
.cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI
.vindex "&$tls_in_sni$&"
.oindex "&%tls_in_sni%&"
With TLS1.0 or above, there is an extension mechanism by which extra
.cindex "header lines" "verifying header names only ASCII"
.cindex "verifying" "header names only ASCII"
This condition is relevant only in an ACL that is run after a message has been
-received, that is, in an ACL specified by &%acl_smtp_data%& or
-&%acl_not_smtp%&. It checks all header names (not the content) to make sure
+received.
+This usually means an ACL specified by &%acl_smtp_data%& or &%acl_not_smtp%&.
+It checks all header names (not the content) to make sure
there are no non-ASCII characters, also excluding control characters. The
allowable characters are decimal ASCII values 33 through 126.
(eg. is generated from the received message)
they must be protected from the options parsing by doubling:
.code
-verify = sender=${sg{${address:$h_sender:}}{/}{//}}
+verify = sender=${listquote{/}{${address:$h_sender:}}}
.endd
.endlist
.section "Per-address filtering" "SECTperaddfil"
-.vindex "&$domain$&"
-.vindex "&$local_part$&"
+.vindex "&$domain_data$&"
+.vindex "&$local_part_data$&"
In contrast to the system filter, which is run just once per message for each
delivery attempt, it is also possible to set up a system-wide filtering
operation that runs once for each recipient address. In this case, variables
-such as &$local_part$& and &$domain$& can be used, and indeed, the choice of
-filter file could be made dependent on them. This is an example of a router
-which implements such a filter:
+such as &$local_part_data$& and &$domain_data$& can be used,
+and indeed, the choice of filter file could be made dependent on them.
+This is an example of a router which implements such a filter:
.code
central_filter:
check_local_user
.code
my_mailboxes:
driver = appendfile
- file = /var/mail/$domain/$local_part_data
+ file = /var/mail/$domain_data/$local_part_data
user = mail
.endd
This uses a directory of mailboxes for each domain. The &%user%& setting is
cases by testing the variable &$local_part_suffix$&. For example:
.code
if $local_part_suffix contains -special then
-save /home/$local_part/Mail/special
+save /home/$local_part_data/Mail/special
endif
.endd
If the filter file does not exist, or does not deal with such addresses, they
.next
.cindex "log" "TLS SNI"
.cindex "TLS" "logging SNI"
+.cindex SNI logging
&%tls_sni%&: When a message is received over an encrypted connection, and
the remote host provided the Server Name Indication extension, the SNI is
added to the log line, preceded by SNI=.
git://git.exim.org / users / heiko / exim.git / blobdiff