-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.69 2005/01/13 11:12:12 ph10 Exp $
+Change log file for Exim from version 4.21
+-------------------------------------------
+
+
+Exim version 4.87
+-----------------
+JH/01 Bug 1664: Disable OCSP for GnuTLS library versions at/before 3.3.16
+ and 3.4.4 - once the server is enabled to respond to an OCSP request
+ it does even when not requested, resulting in a stapling non-aware
+ client dropping the TLS connection.
+
+TF/01 Code cleanup: Overhaul the debug_selector and log_selector machinery to
+ support variable-length bit vectors. No functional change.
+
+TF/02 Improve the consistency of logging incoming and outgoing interfaces.
+ The I= interface field on outgoing lines is now after the H= remote
+ host field, same as incoming lines. There is a separate
+ outgoing_interface log selector which allows you to disable the
+ outgoing I= field.
+
+JH/02 Bug 728: Close logfiles after a daemon-process "exceptional" log write.
+ If not running log_selector +smtp_connection the mainlog would be held
+ open indefinitely after a "too many connections" event, including to a
+ deleted file after a log rotate. Leave the per net connection logging
+ leaving it open for efficiency as that will be quickly detected by the
+ check on the next write.
+
+HS/01 Bug 1671: Fix post transport crash.
+ Processing the wait-<transport> messages could crash the delivery
+ process if the message IDs didn't exist for some reason. When
+ using 'split_spool_directory=yes' the construction of the spool
+ file name failed already, exposing the same netto behaviour.
+
+JH/03 Bug 425: Capture substrings in $regex1, $regex2 etc from regex &
+ mime_regex ACL conditions.
+
+JH/04 Bug 1686: When compiled with EXPERIMENTAL_DSN_INFO: Add extra information
+ to DSN fail messages (bounces): remote IP, remote greeting, remote response
+ to HELO, local diagnostic string.
+
+JH/05 Downgrade message for a TLS-certificate-based authentication fail from
+ log line to debug. Even when configured with a tls authenticator many
+ client connections are expected to not authenticate in this way, so
+ an authenticate fail is not an error.
+
+HS/02 Add the Exim version string to the process info. This way exiwhat
+ gives some more detail about the running daemon.
+
+JH/06 Bug 1395: time-limit cacheing of DNS lookups, to the TTL value. This may
+ matter for fast-change records such as DNSBLs.
+
+JH/07 Bug 1678: Always record an interface option value, if set, as part of a
+ retry record, even if constant. There may be multiple transports with
+ different interface settings and the retry behaviour needs to be kept
+ distinct.
+
+JH/08 Bug 1586: exiqgrep now refuses to run if there are unexpected arguments.
+
+JH/09 Bug 1700: ignore space & tab embedded in base64 during decode.
+
+JH/10 Bug 840: fix log_defer_output option of pipe transport
+
+JH/11 Bug 830: use same host for all RCPTS of a message, even under
+ hosts_randomize. This matters a lot when combined with mua_wrapper.
+
+JH/12 Bug 1706: percent and underbar characters are no longer escaped by the
+ ${quote_pgsql:<string>} operator.
+
+JH/13 Bug 1708: avoid misaligned access in cached lookup.
+
+JH/14 Change header file name for freeradius-client. Relevant if compiling
+ with Radius support; from the Gentoo tree and checked under Fedora.
+
+JH/15 Bug 1712: Introduce $prdr_requested flag variable
+
+JH/16 Bug 1714: Permit an empty string as expansion result for transport
+ option transport_filter, meaning no filtering.
+
+JH/17 Bug 1713: Fix non-PDKIM_DEBUG build. Patch from Jasen Betts.
+
+JH/18 Bug 1709: When built with TLS support, the tls_advertise_hosts option now
+ defaults to "*" (all hosts). The variable is now available when not built
+ with TLS, default unset, mainly to enable keeping the testuite sane.
+ If a server certificate is not supplied (via tls_certificate) an error is
+ logged, and clients will find TLS connections fail on startup. Presumably
+ they will retry in-clear.
+ Packagers of Exim are strongly encouraged to create a server certificate
+ at installation time.
+
+HS/03 Add -bP config_file as a synonym for -bP configure_file, for consistency
+ with the $config_file variable.
+
+JH/19 Two additional event types: msg:rcpt:defer and msg:rcpt:host:defer. Both
+ in transport context, after the attempt, and per-recipient. The latter type
+ is per host attempted. The event data is the error message, and the errno
+ information encodes the lookup type (A vs. MX) used for the (first) host,
+ and the trailing two digits of the smtp 4xx reponse.
+
+GF/01 Bug 1715: Fix for race condition in exicyclog, where exim could attempt
+ to write to mainlog (or rejectlog, paniclog) in the window between file
+ creation and permissions/ownership being changed. Particularly affects
+ installations where exicyclog is run as root, rather than exim user;
+ result is that the running daemon panics and dies.
+
+JH/20 Bug 1701: For MySQL lookups, support MySQL config file option group names.
+
+JH/21 Bug 1720: Add support for priority groups and weighted-random proxy
+ selection for the EXPERIMENTAL_SOCKS feature, via new per-proxy options
+ "pri" and "weight". Note that the previous implicit priority given by the
+ list order is no longer honoured.
+
+JH/22 Bugs 963, 1721: Fix some corner cases in message body canonicalisation
+ for DKIM processing.
+
+JH/23 Move SOCKS5 support from Experimental to mainline, enabled for a build
+ by defining SUPPORT_SOCKS.
+
+JH/26 Move PROXY support from Experimental to mainline, enabled for a build
+ by defining SUPPORT_PROXY. Note that the proxy_required_hosts option
+ is renamed to hosts_proxy, and the proxy_{host,target}_{address,port}.
+ variables are renamed to proxy_{local,external}_{address,port}.
+
+JH/27 Move Internationalisation support from Experimental to mainline, enabled
+ for a build by defining SUPPORT_I18N
+
+JH/28 Bug 1745: Fix redis lookups to handle (quoted) spaces embedded in parts
+ of the query string, and make ${quote_redis:} do that quoting.
+
+JH/29 Move Events support from Experimental to mainline, enabled by default
+ and removable for a build by defining DISABLE_EVENT.
+
+JH/30 Updated DANE implementation code to current from Viktor Dukhovni.
+
+JH/31 Fix bug with hosts_connection_nolog and named-lists which were wrongly
+ cached by the daemon.
+
+JH/32 Move Redis support from Experimental to mainline, enabled for a build
+ by defining LOOKUP_REDIS. The libhiredis library is required.
+
+JH/33 Bug 1748: Permit ACL dnslists= condition in non-smtp ACLs if explicit
+ keys are given for lookup.
+
+
+Exim version 4.86
+-----------------
+JH/01 Bug 1545: The smtp transport option "retry_include_ip_address" is now
+ expanded.
+
+JH/02 The smtp transport option "multi_domain" is now expanded.
+
+JH/03 The smtp transport now requests PRDR by default, if the server offers
+ it.
+
+JH/04 Certificate name checking on server certificates, when exim is a client,
+ is now done by default. The transport option tls_verify_cert_hostnames
+ can be used to disable this per-host. The build option
+ EXPERIMENTAL_CERTNAMES is withdrawn.
+
+JH/05 The value of the tls_verify_certificates smtp transport and main options
+ default to the word "system" to access the system default CA bundle.
+ For GnuTLS, only version 3.0.20 or later.
+
+JH/06 Verification of the server certificate for a TLS connection is now tried
+ (but not required) by default. The verification status is now logged by
+ default, for both outbound TLS and client-certificate supplying inbound
+ TLS connections
+
+JH/07 Changed the default rfc1413 lookup settings to disable calls. Few
+ sites use this now.
+
+JH/08 The EXPERIMENTAL_DSN compile option is no longer needed; all Delivery
+ Status Notification (bounce) messages are now MIME format per RFC 3464.
+ Support for RFC 3461 DSN options NOTIFY,ENVID,RET,ORCPT can be advertised
+ under the control of the dsn_advertise_hosts option, and routers may
+ have a dsn_lasthop option.
+
+JH/09 A timeout of 2 minutes is now applied to all malware scanner types by
+ default, modifiable by a malware= option. The list separator for
+ the options can now be changed in the usual way. Bug 68.
+
+JH/10 The smtp_receive_timeout main option is now expanded before use.
+
+JH/11 The incoming_interface log option now also enables logging of the
+ local interface on delivery outgoing connections.
+
+JH/12 The cutthrough-routing facility now supports multi-recipient mails,
+ if the interface and destination host and port all match.
+
+JH/13 Bug 344: The verify = reverse_host_lookup ACL condition now accepts a
+ /defer_ok option.
+
+JH/14 Bug 1573: The spam= ACL condition now additionally supports Rspamd.
+ Patch from Andrew Lewis.
+
+JH/15 Bug 670: The spamd_address main option (for the spam= ACL condition)
+ now supports optional time-restrictions, weighting, and priority
+ modifiers per server. Patch originally by <rommer@active.by>.
+
+JH/16 The spamd_address main option now supports a mixed list of local
+ and remote servers. Remote servers can be IPv6 addresses, and
+ specify a port-range.
+
+JH/17 Bug 68: The spamd_address main option now supports an optional
+ timeout value per server.
+
+JH/18 Bug 1581: Router and transport options headers_add/remove can
+ now have the list separator specified.
+
+JH/19 Bug 392: spamd_address, and clamd av_scanner, now support retry
+ option values.
+
+JH/20 Bug 1571: Ensure that $tls_in_peerdn is set, when verification fails
+ under OpenSSL.
+
+JH/21 Support for the A6 type of dns record is withdrawn.
+
+JH/22 Bug 608: The result of a QUIT or not-QUIT toplevel ACL now matters
+ rather than the verbs used.
+
+JH/23 Bug 1572: Increase limit on SMTP confirmation message copy size
+ from 255 to 1024 chars.
+
+JH/24 Verification callouts now attempt to use TLS by default.
+
+HS/01 DNSSEC options (dnssec_require_domains, dnssec_request_domains)
+ are generic router options now. The defaults didn't change.
+
+JH/25 Bug 466: Add RFC2322 support for MIME attachment filenames.
+ Original patch from Alexander Shikoff, worked over by JH.
+
+HS/02 Bug 1575: exigrep falls back to autodetection of compressed
+ files if ZCAT_COMMAND is not executable.
+
+JH/26 Bug 1539: Add timout/retry options on dnsdb lookups.
+
+JH/27 Bug 286: Support SOA lookup in dnsdb lookups.
+
+JH/28 Bug 1588: Do not use the A lookup following an AAAA for setting the FQDN.
+ Normally benign, it bites when the pair was led to by a CNAME;
+ modern usage is to not canoicalize the domain to a CNAME target
+ (and we were inconsistent anyway for A-only vs AAAA+A).
+
+JH/29 Bug 1632: Removed the word "rejected" from line logged for ACL discards.
+
+JH/30 Check the forward DNS lookup for DNSSEC, in addition to the reverse,
+ when evaluating $sender_host_dnssec.
+
+JH/31 Check the HELO verification lookup for DNSSEC, adding new
+ $sender_helo_dnssec variable.
+
+JH/32 Bug 1397: Enable ECDHE on OpenSSL, just the NIST P-256 curve.
+
+JH/33 Bug 1346: Note MAIL cmd seen in -bS batch, to avoid smtp_no_mail log.
+
+JH/34 Bug 1648: Fix a memory leak seen with "mailq" and large queues.
+
+JH/35 Bug 1642: Fix support of $spam_ variables at delivery time. Was
+ documented as working, but never had. Support all but $spam_report.
+
+JH/36 Bug 1659: Guard checking of input smtp commands again pseudo-command
+ added for tls authenticator.
+
+
+Exim version 4.85
+-----------------
+TL/01 When running the test suite, the README says that variables such as
+ no_msglog_check are global and can be placed anywhere in a specific
+ test's script, however it was observed that placement needed to be near
+ the beginning for it to behave that way. Changed the runtest perl
+ script to read through the entire script once to detect and set these
+ variables, reset to the beginning of the script, and then run through
+ the script parsing/test process like normal.
+
+TL/02 The BSD's have an arc4random API. One of the functions to induce
+ adding randomness was arc4random_stir(), but it has been removed in
+ OpenBSD 5.5. Detect this OpenBSD version and skip calling this
+ function when detected.
+
+JH/01 Expand the EXPERIMENTAL_TPDA feature. Several different events now
+ cause callback expansion.
+
+TL/03 Bugzilla 1518: Clarify "condition" processing in routers; that
+ syntax errors in an expansion can be treated as a string instead of
+ logging or causing an error, due to the internal use of bool_lax
+ instead of bool when processing it.
+
+JH/02 Add EXPERIMENTAL_DANE, allowing for using the DNS as trust-anchor for
+ server certificates when making smtp deliveries.
+
+JH/03 Support secondary-separator specifier for MX, SRV, TLSA lookups.
+
+JH/04 Add ${sort {list}{condition}{extractor}} expansion item.
+
+TL/04 Bugzilla 1216: Add -M (related messages) option to exigrep.
+
+TL/05 GitHub Issue 18: Adjust logic testing for true/false in redis lookups.
+ Merged patch from Sebastian Wiedenroth.
+
+JH/05 Fix results-pipe from transport process. Several recipients, combined
+ with certificate use, exposed issues where response data items split
+ over buffer boundaries were not parsed properly. This eventually
+ resulted in duplicates being sent. This issue only became common enough
+ to notice due to the introduction of conection certificate information,
+ the item size being so much larger. Found and fixed by Wolfgang Breyha.
+
+JH/06 Bug 1533: Fix truncation of items in headers_remove lists. A fixed
+ size buffer was used, resulting in syntax errors when an expansion
+ exceeded it.
+
+JH/07 Add support for directories of certificates when compiled with a GnuTLS
+ version 3.3.6 or later.
+
+JH/08 Rename the TPDA expermimental facility to Event Actions. The #ifdef
+ is EXPERIMENTAL_EVENT, the main-configuration and transport options
+ both become "event_action", the variables become $event_name, $event_data
+ and $event_defer_errno. There is a new variable $verify_mode, usable in
+ routers, transports and related events. The tls:cert event is now also
+ raised for inbound connections, if the main configuration event_action
+ option is defined.
+
+TL/06 In test suite, disable OCSP for old versions of openssl which contained
+ early OCSP support, but no stapling (appears to be less than 1.0.0).
+
+JH/09 When compiled with OpenSSL and EXPERIMENTAL_CERTNAMES, the checks on
+ server certificate names available under the smtp transport option
+ "tls_verify_cert_hostname" now do not permit multi-component wildcard
+ matches.
+
+JH/10 Time-related extraction expansions from certificates now use the main
+ option "timezone" setting for output formatting, and are consistent
+ between OpenSSL and GnuTLS compilations. Bug 1541.
+
+JH/11 Fix a crash in mime ACL when meeting a zero-length, quoted or RFC2047-
+ encoded parameter in the incoming message. Bug 1558.
+
+JH/12 Bug 1527: Autogrow buffer used in reading spool files. Since they now
+ include certificate info, eximon was claiming there were spoolfile
+ syntax errors.
+
+JH/13 Bug 1521: Fix ldap lookup for single-attr request, multiple-attr return.
+
+JH/14 Log delivery-related information more consistently, using the sequence
+ "H=<name> [<ip>]" wherever possible.
+
+TL/07 Bug 1547: Omit RFCs from release. Draft and RFCs have licenses which
+ are problematic for Debian distribution, omit them from the release
+ tarball.
+
+JH/15 Updates and fixes to the EXPERIMENTAL_DSN feature.
+
+JH/16 Fix string representation of time values on 64bit time_t anchitectures.
+ Bug 1561.
+
+JH/17 Fix a null-indirection in certextract expansions when a nondefault
+ output list separator was used.
+
+
+Exim version 4.84
+-----------------
+TL/01 Bugzilla 1506: Re-add a 'return NULL' to silence complaints from static
+ checkers that were complaining about end of non-void function with no
+ return.
+
+JH/01 Bug 1513: Fix parsing of quoted parameter values in MIME headers.
+ This was a regression intruduced in 4.83 by another bugfix.
+
+JH/02 Fix broken compilation when EXPERIMENTAL_DSN is enabled.
+
+TL/02 Bug 1509: Fix exipick for enhanced spoolfile specification used when
+ EXPERIMENTAL_DSN is enabled. Fix from Wolfgang Breyha.
+
+
+Exim version 4.83
+-----------------
+
+TF/01 Correctly close the server side of TLS when forking for delivery.
+
+ When a message was received over SMTP with TLS, Exim failed to clear up
+ the incoming connection properly after forking off the child process to
+ deliver the message. In some situations the subsequent outgoing
+ delivery connection happened to have the same fd number as the incoming
+ connection previously had. Exim would try to use TLS and fail, logging
+ a "Bad file descriptor" error.
+
+TF/02 Portability fix for building lookup modules on Solaris when the xpg4
+ utilities have not been installed.
+
+JH/01 Fix memory-handling in use of acl as a conditional; avoid free of
+ temporary space as the ACL may create new global variables.
+
+TL/01 LDAP support uses per connection or global context settings, depending
+ upon the detected version of the libraries at build time.
+
+TL/02 Experimental Proxy Protocol support: allows a proxied SMTP connection
+ to extract and use the src ip:port in logging and expansions as if it
+ were a direct connection from the outside internet. PPv2 support was
+ updated based on HAProxy spec change in May 2014.
+
+JH/02 Add ${listextract {number}{list}{success}{fail}}.
+
+TL/03 Bugzilla 1433: Fix DMARC SEGV with specific From header contents.
+ Properly escape header and check for NULL return.
+
+PP/01 Continue incomplete 4.82 PP/19 by fixing docs too: use dns_dnssec_ok
+ not dns_use_dnssec.
+
+JH/03 Bugzilla 1157: support log_selector smtp_confirmation for lmtp.
+
+TL/04 Add verify = header_names_ascii check to reject email with non-ASCII
+ characters in header names, implemented as a verify condition.
+ Contributed by Michael Fischer v. Mollard.
+
+TL/05 Rename SPF condition results err_perm and err_temp to standardized
+ results permerror and temperror. Previous values are deprecated but
+ still accepted. In a future release, err_perm and err_temp will be
+ completely removed, which will be a backward incompatibility if the
+ ACL tests for either of these two old results. Patch contributed by
+ user bes-internal on the mailing list.
+
+JH/04 Add ${utf8clean:} operator. Contributed by Alex Rau.
+
+JH/05 Bugzilla 305: Log incoming-TLS details on rejects, subject to log
+ selectors, in both main and reject logs.
+
+JH/06 Log outbound-TLS and port details, subject to log selectors, for a
+ failed delivery.
+
+JH/07 Add malware type "sock" for talking to simple daemon.
+
+JH/08 Bugzilla 1371: Add tls_{,try_}verify_hosts to smtp transport.
+
+JH/09 Bugzilla 1431: Support (with limitations) headers_add/headers_remove in
+ routers/transports under cutthrough routing.
+
+JH/10 Bugzilla 1005: ACL "condition =" should accept values which are negative
+ numbers. Touch up "bool" conditional to keep the same definition.
+
+TL/06 Remove duplicated language in spec file from 4.82 TL/16.
+
+JH/11 Add dnsdb tlsa lookup. From Todd Lyons.
+
+JH/12 Expand items in router/transport headers_add or headers_remove lists
+ individually rather than the list as a whole. Bug 1452.
+
+ Required for reasonable handling of multiple headers_ options when
+ they may be empty; requires that headers_remove items with embedded
+ colons must have them doubled (or the list-separator changed).
+
+TL/07 Add new dmarc expansion variable $dmarc_domain_policy to directly
+ view the policy declared in the DMARC record. Currently, $dmarc_status
+ is a combined value of both the record presence and the result of the
+ analysis.
+
+JH/13 Fix handling of $tls_cipher et.al. in (non-verify) transport. Bug 1455.
+
+JH/14 New options dnssec_request_domains, dnssec_require_domains on the
+ dnslookup router and the smtp transport (applying to the forward
+ lookup).
+
+TL/08 Bugzilla 1453: New LDAP "SERVERS=" option allows admin to override list
+ of ldap servers used for a specific lookup. Patch provided by Heiko
+ Schlichting.
+
+JH/18 New options dnssec_lax, dnssec_strict on dnsdb lookups.
+ New variable $lookup_dnssec_authenticated for observability.
+
+TL/09 Bugzilla 609: Add -C option to exiqgrep, specify which exim.conf to use.
+ Patch submitted by Lars Timman.
+
+JH/19 EXPERIMENTAL_OCSP support under GnuTLS. Bug 1459.
+
+TL/10 Bugzilla 1454: New -oMm option to pass message reference to Exim.
+ Requires trusted mode and valid format message id, aborts otherwise.
+ Patch contributed by Heiko Schlichting.
+
+JH/20 New expansion variables tls_(in,out)_(our,peer)cert, and expansion item
+ certextract with support for various fields. Bug 1358.
+
+JH/21 Observability of OCSP via variables tls_(in,out)_ocsp. Stapling
+ is requested by default, modifiable by smtp transport option
+ hosts_request_ocsp.
+
+JH/22 Expansion operators ${md5:string} and ${sha1:string} can now
+ operate on certificate variables to give certificate fingerprints
+ Also new ${sha256:cert_variable}.
+
+JH/23 The PRDR feature is moved from being Experimental into the mainline.
+
+TL/11 Bug 1119: fix memory allocation in string_printing2(). Patch from
+ Christian Aistleitner.
+
+JH/24 The OCSP stapling feature is moved from Experimental into the mainline.
+
+TL/12 Bug 1444: Fix improper \r\n sequence handling when writing spool
+ file. Patch from Wolfgang Breyha.
+
+JH/25 Expand the coverage of the delivery $host and $host_address to
+ client authenticators run in verify callout. Bug 1476.
+
+JH/26 Port service names are now accepted for tls_on_connect_ports, to
+ align with daemon_smtp_ports. Bug 72.
+
+TF/03 Fix udpsend. The ip_connectedsocket() function's socket type
+ support and error reporting did not work properly.
+
+TL/13 Bug 1495: Exiqgrep check if -C config file specified on cli exists
+ and is readable. Patch from Andrew Colin Kissa.
+
+TL/14 Enhance documentation of ${run expansion and how it parses the
+ commandline after expansion, particularly in the case when an
+ unquoted variable expansion results in an empty value.
+
+JH/27 The TLS SNI feature was broken in 4.82. Fix it.
+
+PP/02 Fix internal collision of T_APL on systems which support RFC3123
+ by renaming away from it. Addresses GH issue 15, reported by
+ Jasper Wallace.
+
+JH/28 Fix parsing of MIME headers for parameters with quoted semicolons.
+
+TL/15 SECURITY: prevent double expansion in math comparison functions
+ (can expand unsanitized data). Not remotely exploitable.
+ CVE-2014-2972
+
+
+Exim version 4.82
+-----------------
+
+PP/01 Add -bI: framework, and -bI:sieve for querying sieve capabilities.
+
+PP/02 Make -n do something, by making it not do something.
+ When combined with -bP, the name of an option is not output.
+
+PP/03 Added tls_dh_min_bits SMTP transport driver option, only honoured
+ by GnuTLS.
+
+PP/04 First step towards DNSSEC, provide $sender_host_dnssec for
+ $sender_host_name and config options to manage this, and basic check
+ routines.
+
+PP/05 DSCP support for outbound connections and control modifier for inbound.
+
+PP/06 Cyrus SASL: set local and remote IP;port properties for driver.
+ (Only plugin which currently uses this is kerberos4, which nobody should
+ be using, but we should make it available and other future plugins might
+ conceivably use it, even though it would break NAT; stuff *should* be
+ using channel bindings instead).
+
+PP/07 Handle "exim -L <tag>" to indicate to use syslog with tag as the process
+ name; added for Sendmail compatibility; requires admin caller.
+ Handle -G as equivalent to "control = suppress_local_fixups" (we used to
+ just ignore it); requires trusted caller.
+ Also parse but ignore: -Ac -Am -X<logfile>
+ Bugzilla 1117.
+
+TL/01 Bugzilla 1258 - Refactor MAIL FROM optional args processing.
+
+TL/02 Add +smtp_confirmation as a default logging option.
+
+TL/03 Bugzilla 198 - Implement remove_header ACL modifier.
+ Patch by Magnus Holmgren from 2007-02-20.
+
+TL/04 Bugzilla 1281 - Spec typo.
+ Bugzilla 1283 - Spec typo.
+ Bugzilla 1290 - Spec grammar fixes.
+
+TL/05 Bugzilla 1285 - Spec omission, fix docbook errors for spec.txt creation.
+
+TL/06 Add Experimental DMARC support using libopendmarc libraries.
+
+TL/07 Fix an out of order global option causing a segfault. Reported to dev
+ mailing list by by Dmitry Isaikin.
+
+JH/01 Bugzilla 1201 & 304 - New cutthrough-delivery feature, with TLS support.
+
+JH/02 Support "G" suffix to numbers in ${if comparisons.
+
+PP/08 Handle smtp transport tls_sni option forced-fail for OpenSSL.
+
+NM/01 Bugzilla 1197 - Spec typo
+ Bugzilla 1196 - Spec examples corrections
+
+JH/03 Add expansion operators ${listnamed:name} and ${listcount:string}
+
+PP/09 Add gnutls_allow_auto_pkcs11 option (was originally called
+ gnutls_enable_pkcs11, but renamed to more accurately indicate its
+ function.
+
+PP/10 Let Linux makefile inherit CFLAGS/CFLAGS_DYNAMIC.
+ Pulled from Debian 30_dontoverridecflags.dpatch by Andreas Metzler.
+
+JH/04 Add expansion item ${acl {name}{arg}...}, expansion condition
+ "acl {{name}{arg}...}", and optional args on acl condition
+ "acl = name arg..."
+
+JH/05 Permit multiple router/transport headers_add/remove lines.
+
+JH/06 Add dnsdb pseudo-lookup "a+" to do an "aaaa" + "a" combination.
+
+JH/07 Avoid using a waiting database for a single-message-only transport.
+ Performance patch from Paul Fisher. Bugzilla 1262.
+
+JH/08 Strip leading/trailing newlines from add_header ACL modifier data.
+ Bugzilla 884.
+
+JH/09 Add $headers_added variable, with content from use of ACL modifier
+ add_header (but not yet added to the message). Bugzilla 199.
+
+JH/10 Add 8bitmime log_selector, for 8bitmime status on the received line.
+ Pulled from Bugzilla 817 by Wolfgang Breyha.
+
+PP/11 SECURITY: protect DKIM DNS decoding from remote exploit.
+ CVE-2012-5671
+ (nb: this is the same fix as in Exim 4.80.1)
+
+JH/11 Add A= logging on delivery lines, and a client_set_id option on
+ authenticators.
+
+JH/12 Add optional authenticated_sender logging to A= and a log_selector
+ for control.
+
+PP/12 Unbreak server_set_id for NTLM/SPA auth, broken by 4.80 PP/29.
+
+PP/13 Dovecot auth: log better reason to rejectlog if Dovecot did not
+ advertise SMTP AUTH mechanism to us, instead of a generic
+ protocol violation error. Also, make Exim more robust to bad
+ data from the Dovecot auth socket.
+
+TF/01 Fix ultimate retry timeouts for intermittently deliverable recipients.
+
+ When a queue runner is handling a message, Exim first routes the
+ recipient addresses, during which it prunes them based on the retry
+ hints database. After that it attempts to deliver the message to
+ any remaining recipients. It then updates the hints database using
+ the retry rules.
+
+ So if a recipient address works intermittently, it can get repeatedly
+ deferred at routing time. The retry hints record remains fresh so the
+ address never reaches the final cutoff time.
+
+ This is a fairly common occurrence when a user is bumping up against
+ their storage quota. Exim had some logic in its local delivery code
+ to deal with this. However it did not apply to per-recipient defers
+ in remote deliveries, e.g. over LMTP to a separate IMAP message store.
+
+ This change adds a proper retry rule check during routing so that the
+ final cutoff time is checked against the message's age. We only do
+ this check if there is an address retry record and there is not a
+ domain retry record; this implies that previous attempts to handle
+ the address had the retry_use_local_parts option turned on. We use
+ this as an approximation for the destination being like a local
+ delivery, as in LMTP.
+
+ I suspect this new check makes the old local delivery cutoff check
+ redundant, but I have not verified this so I left the code in place.
+
+TF/02 Correct gecos expansion when From: is a prefix of the username.
+
+ Test 0254 submits a message to Exim with the header
+
+ Resent-From: f
+
+ When I ran the test suite under the user fanf2, Exim expanded
+ the header to contain my full name, whereas it should have added
+ a Resent-Sender: header. It erroneously treats any prefix of the
+ username as equal to the username.
+
+ This change corrects that bug.
+
+GF/01 DCC debug and logging tidyup
+ Error conditions log to paniclog rather than rejectlog.
+ Debug lines prefixed by "DCC: " to remove any ambiguity.
+
+TF/03 Avoid unnecessary rebuilds of lookup-related code.
+
+PP/14 Fix OCSP reinitialisation in SNI handling for Exim/TLS as server.
+ Bug spotted by Jeremy Harris; was flawed since initial commit.
+ Would have resulted in OCSP responses post-SNI triggering an Exim
+ NULL dereference and crash.
+
+JH/13 Add $router_name and $transport_name variables. Bugzilla 308.
+
+PP/15 Define SIOCGIFCONF_GIVES_ADDR for GNU Hurd.
+ Bug detection, analysis and fix by Samuel Thibault.
+ Bugzilla 1331, Debian bug #698092.
+
+SC/01 Update eximstats to watch out for senders sending 'HELO [IpAddr]'
+
+JH/14 SMTP PRDR (http://www.eric-a-hall.com/specs/draft-hall-prdr-00.txt).
+ Server implementation by Todd Lyons, client by JH.
+ Only enabled when compiled with EXPERIMENTAL_PRDR. A new
+ config variable "prdr_enable" controls whether the server
+ advertises the facility. If the client requests PRDR a new
+ acl_data_smtp_prdr ACL is called once for each recipient, after
+ the body content is received and before the acl_smtp_data ACL.
+ The client is controlled by bolth of: a hosts_try_prdr option
+ on the smtp transport, and the server advertisement.
+ Default client logging of deliveries and rejections involving
+ PRDR are flagged with the string "PRDR".
+
+PP/16 Fix problems caused by timeouts during quit ACLs trying to double
+ fclose(). Diagnosis by Todd Lyons.
+
+PP/17 Update configure.default to handle IPv6 localhost better.
+ Patch by Alain Williams (plus minor tweaks).
+ Bugzilla 880.
+
+PP/18 OpenSSL made graceful with empty tls_verify_certificates setting.
+ This is now consistent with GnuTLS, and is now documented: the
+ previous undocumented portable approach to treating the option as
+ unset was to force an expansion failure. That still works, and
+ an empty string is now equivalent.
+
+PP/19 Renamed DNSSEC-enabling option to "dns_dnssec_ok", to make it
+ clearer that Exim is using the DO (DNSSEC OK) EDNS0 resolver flag,
+ not performing validation itself.
+
+PP/20 Added force_command boolean option to pipe transport.
+ Patch from Nick Koston, of cPanel Inc.
+
+JH/15 AUTH support on callouts (and hence cutthrough-deliveries).
+ Bugzilla 321, 823.
+
+TF/04 Added udpsend ACL modifer and hexquote expansion operator
+
+PP/21 Fix eximon continuous updating with timestamped log-files.
+ Broken in a format-string cleanup in 4.80, missed when I repaired the
+ other false fix of the same issue.
+ Report and fix from Heiko Schlichting.
+ Bugzilla 1363.
+
+PP/22 Guard LDAP TLS usage against Solaris LDAP variant.
+ Report from Prashanth Katuri.
+
+PP/23 Support safari_ecdhe_ecdsa_bug for openssl_options.
+ It's SecureTransport, so affects any MacOS clients which use the
+ system-integrated TLS libraries, including email clients.
+
+PP/24 Fix segfault from trying to fprintf() to a NULL stdio FILE* if
+ using a MIME ACL for non-SMTP local injection.
+ Report and assistance in diagnosis by Warren Baker.
+
+TL/08 Adjust exiqgrep to be case-insensitive for sender/receiver.
+
+JH/16 Fix comparisons for 64b. Bugzilla 1385.
+
+TL/09 Add expansion variable $authenticated_fail_id to keep track of
+ last id that failed so it may be referenced in subsequent ACL's.
+
+TL/10 Bugzilla 1375 - Prevent TLS rebinding in ldap. Patch provided by
+ Alexander Miroch.
+
+TL/11 Bugzilla 1382 - Option ldap_require_cert overrides start_tls
+ ldap library initialization, allowing self-signed CA's to be
+ used. Also properly sets require_cert option later in code by
+ using NULL (global ldap config) instead of ldap handle (per
+ session). Bug diagnosis and testing by alxgomz.
+
+TL/12 Enhanced documentation in the ratelimit.pl script provided in
+ the src/util/ subdirectory.
+
+TL/13 Bug 1031 - Imported transport SQL logging patch from Axel Rau
+ renamed to Transport Post Delivery Action by Jeremy Harris, as
+ EXPERIMENTAL_TPDA.
+
+TL/14 Bugzilla 1217 - Redis lookup support has been added. It is only enabled
+ when Exim is compiled with EXPERIMENTAL_REDIS. A new config variable
+ redis_servers = needs to be configured which will be used by the redis
+ lookup. Patch from Warren Baker, of The Packet Hub.
+
+TL/15 Fix exiqsumm summary for corner case. Patch provided by Richard Hall.
+
+TL/16 Bugzilla 1289 - Clarify host/ip processing when have errors looking up a
+ hostname or reverse DNS when processing a host list. Used suggestions
+ from multiple comments on this bug.
+
+TL/17 Bugzilla 1057 - Multiple clamd TCP targets patch from Mark Zealey.
+
+TL/18 Had previously added a -CONTINUE option to runtest in the test suite.
+ Missed a few lines, added it to make the runtest require no keyboard
+ interaction.
+
+TL/19 Bugzilla 1402 - Test 533 fails if any part of the path to the test suite
+ contains upper case chars. Make router use caseful_local_part.
+
+TL/20 Bugzilla 1400 - Add AVOID_GNUTLS_PKCS11 build option. Allows GnuTLS
+ support when GnuTLS has been built with p11-kit.
+
+
+Exim version 4.80.1
+-------------------
+
+PP/01 SECURITY: protect DKIM DNS decoding from remote exploit.
+ CVE-2012-5671
+ This, or similar/improved, will also be change PP/11 of 4.82.
+
+
+Exim version 4.80
+-----------------
+
+PP/01 Handle short writes when writing local log-files.
+ In practice, only affects FreeBSD (8 onwards).
+ Bugzilla 1053, with thanks to Dmitry Isaikin.
+
+NM/01 Bugzilla 949 - Documentation tweak
+
+NM/02 Bugzilla 1093 - eximstats DATA reject detection regexps
+ improved.
+
+NM/03 Bugzilla 1169 - primary_hostname spelling was incorrect in docs.
+
+PP/02 Implemented gsasl authenticator.
+
+PP/03 Implemented heimdal_gssapi authenticator with "server_keytab" option.
+
+PP/04 Local/Makefile support for (AUTH|LOOKUP)_*_PC=foo to use
+ `pkg-config foo` for cflags/libs.
+
+PP/05 Swapped $auth1/$auth2 for gsasl GSSAPI mechanism, to be more consistent
+ with rest of GSASL and with heimdal_gssapi.
+
+PP/06 Local/Makefile support for USE_(GNUTLS|OPENSSL)_PC=foo to use
+ `pkg-config foo` for cflags/libs for the TLS implementation.
+
+PP/07 New expansion variable $tls_bits; Cyrus SASL server connection
+ properties get this fed in as external SSF. A number of robustness
+ and debugging improvements to the cyrus_sasl authenticator.
+
+PP/08 cyrus_sasl server now expands the server_realm option.
+
+PP/09 Bugzilla 1214 - Log authentication information in reject log.
+ Patch by Jeremy Harris.
+
+PP/10 Added dbmjz lookup type.
+
+PP/11 Let heimdal_gssapi authenticator take a SASL message without an authzid.
+
+PP/12 MAIL args handles TAB as well as SP, for better interop with
+ non-compliant senders.
+ Analysis and variant patch by Todd Lyons.
+
+NM/04 Bugzilla 1237 - fix cases where printf format usage not indicated
+ Bug report from Lars Müller <lars@samba.org> (via SUSE),
+ Patch from Dirk Mueller <dmueller@suse.com>
+
+PP/13 tls_peerdn now print-escaped for spool files.
+ Observed some $tls_peerdn in wild which contained \n, which resulted
+ in spool file corruption.
+
+PP/14 TLS fixes for OpenSSL: support TLS 1.1 & 1.2; new "openssl_options"
+ values; set SSL_MODE_AUTO_RETRY so that OpenSSL will retry a read
+ or write after TLS renegotiation, which otherwise led to messages
+ "Got SSL error 2".
+
+TK/01 Bugzilla 1239 - fix DKIM verification when signature was not inserted
+ as a tracking header (ie: a signed header comes before the signature).
+ Patch from Wolfgang Breyha.
+
+JH/01 Bugzilla 660 - Multi-valued attributes from ldap now parseable as a
+ comma-sep list; embedded commas doubled.
+
+JH/02 Refactored ACL "verify =" logic to table-driven dispatch.
+
+PP/15 LDAP: Check for errors of TLS initialisation, to give correct
+ diagnostics.
+ Report and patch from Dmitry Banschikov.
+
+PP/16 Removed "dont_insert_empty_fragments" fron "openssl_options".
+ Removed SSL_clear() after SSL_new() which led to protocol negotiation
+ failures. We appear to now support TLS1.1+ with Exim.
+
+PP/17 OpenSSL: new expansion var $tls_sni, which if used in tls_certificate
+ lets Exim select keys and certificates based upon TLS SNI from client.
+ Also option tls_sni on SMTP Transports. Also clear $tls_bits correctly
+ before an outbound SMTP session. New log_selector, +tls_sni.
+
+PP/18 Bugzilla 1122 - check localhost_number expansion for failure, avoid
+ NULL dereference. Report and patch from Alun Jones.
+
+PP/19 DNS resolver init changes for NetBSD compatibility. (Risk of breakage
+ on less well tested platforms). Obviates NetBSD pkgsrc patch-ac.
+ Not seeing resolver debug output on NetBSD, but suspect this is a
+ resolver implementation change.
+
+PP/20 Revert part of NM/04, it broke log_path containing %D expansions.
+ Left warnings. Added "eximon gdb" invocation mode.
+
+PP/21 Defaulting "accept_8bitmime" to true, not false.
+
+PP/22 Added -bw for inetd wait mode support.
+
+PP/23 Added PCRE_CONFIG=yes support to Makefile for using pcre-config to
+ locate the relevant includes and libraries. Made this the default.
+
+PP/24 Fixed headers_only on smtp transports (was not sending trailing dot).
+ Bugzilla 1246, report and most of solution from Tomasz Kusy.
+
+JH/03 ${eval } now uses 64-bit and supports a "g" suffix (like to "k" and "m").
+ This may cause build issues on older platforms.
+
+PP/25 Revamped GnuTLS support, passing tls_require_ciphers to
+ gnutls_priority_init, ignoring Exim options gnutls_require_kx,
+ gnutls_require_mac & gnutls_require_protocols (no longer supported).
+ Added SNI support via GnuTLS too.
+ Made ${randint:..} supplier available, if using not-too-old GnuTLS.
+
+PP/26 Added EXPERIMENTAL_OCSP for OpenSSL.
+
+PP/27 Applied dnsdb SPF support patch from Janne Snabb.
+ Applied second patch from Janne, implementing suggestion to default
+ multiple-strings-in-record handling to match SPF spec.
+
+JH/04 Added expansion variable $tod_epoch_l for a higher-precision time.
+
+PP/28 Fix DCC dcc_header content corruption (stack memory referenced,
+ read-only, out of scope).
+ Patch from Wolfgang Breyha, report from Stuart Northfield.
+
+PP/29 Fix three issues highlighted by clang analyser static analysis.
+ Only crash-plausible issue would require the Cambridge-specific
+ iplookup router and a misconfiguration.
+ Report from Marcin Mirosław.
+
+PP/30 Another attempt to deal with PCRE_PRERELEASE, this one less buggy.
+
+PP/31 %D in printf continues to cause issues (-Wformat=security), so for
+ now guard some of the printf checks behind WANT_DEEPER_PRINTF_CHECKS.
+ As part of this, removing so much warning spew let me fix some minor
+ real issues in debug logging.
+
+PP/32 GnuTLS was always using default tls_require_ciphers, due to a missing
+ assignment on my part. Fixed.
+
+PP/33 Added tls_dh_max_bits option, defaulting to current hard-coded limit
+ of NSS, for GnuTLS/NSS interop. Problem root cause diagnosis by
+ Janne Snabb (who went above and beyond: thank you).
+
+PP/34 Validate tls_require_ciphers on startup, since debugging an invalid
+ string otherwise requires a connection and a bunch more work and it's
+ relatively easy to get wrong. Should also expose TLS library linkage
+ problems.
+
+PP/35 Pull in <features.h> on Linux, for some portability edge-cases of
+ 64-bit ${eval} (JH/03).
+
+PP/36 Define _GNU_SOURCE in exim.h; it's needed for some releases of
+ GNU libc to support some of the 64-bit stuff, should not lead to
+ conflicts. Defined before os.h is pulled in, so if a given platform
+ needs to override this, it can.
+
+PP/37 Unbreak Cyrus SASL auth: SSF retrieval was incorrect, Exim thought
+ protection layer was required, which is not implemented.
+ Bugzilla 1254, patch from Wolfgang Breyha.
+
+PP/38 Overhaul DH prime handling, supply RFC-specified DH primes as built
+ into Exim, default to IKE id 23 from RFC 5114 (2048 bit). Make
+ tls_dhparam take prime identifiers. Also unbreak combination of
+ OpenSSL+DH_params+TLSSNI.
+
+PP/39 Disable SSLv2 by default in OpenSSL support.
+
+
+Exim version 4.77
+-----------------
+
+PP/01 Solaris build fix for Oracle's LDAP libraries.
+ Bugzilla 1109, patch from Stephen Usher.
+
+TF/01 HP/UX build fix: avoid arithmetic on a void pointer.
+
+TK/01 DKIM Verification: Fix relaxed canon for empty headers w/o
+ whitespace trailer
+
+TF/02 Fix a couple more cases where we did not log the error message
+ when unlink() failed. See also change 4.74-TF/03.
+
+TF/03 Make the exiwhat support code safe for signals. Previously Exim might
+ lock up or crash if it happened to be inside a call to libc when it
+ got a SIGUSR1 from exiwhat.
+
+ The SIGUSR1 handler appends the current process status to the process
+ log which is later printed by exiwhat. It used to use the general
+ purpose logging code to do this, but several functions it calls are
+ not safe for signals.
+
+ The new output code in the SIGUSR1 handler is specific to the process
+ log, and simple enough that it's easy to inspect for signal safety.
+ Removing some special cases also simplifies the general logging code.
+ Removing the spurious timestamps from the process log simplifies
+ exiwhat.
+
+TF/04 Improved ratelimit ACL condition.
+
+ The /noupdate option has been deprecated in favour of /readonly which
+ has clearer semantics. The /leaky, /strict, and /readonly update modes
+ are mutually exclusive. The update mode is no longer included in the
+ database key; it just determines when the database is updated. (This
+ means that when you upgrde Exim will forget old rate measurements.)
+
+ Exim now checks that the per_* options are used with an update mode that
+ makes sense for the current ACL. For example, when Exim is processing a
+ message (e.g. acl_smtp_rcpt or acl_smtp_data, etc.) you can specify
+ per_mail/leaky or per_mail/strict; otherwise (e.g. in acl_smtp_helo) you
+ must specify per_mail/readonly. If you omit the update mode it defaults to
+ /leaky where that makes sense (as before) or /readonly where required.
+
+ The /noupdate option is now undocumented but still supported for
+ backwards compatibility. It is equivalent to /readonly except that in
+ ACLs where /readonly is required you may specify /leaky/noupdate or
+ /strict/noupdate which are treated the same as /readonly.
+
+ A useful new feature is the /count= option. This is a generalization
+ of the per_byte option, so that you can measure the throughput of other
+ aggregate values. For example, the per_byte option is now equivalent
+ to per_mail/count=${if >{0}{$message_size} {0} {$message_size} }.
+
+ The per_rcpt option has been generalized using the /count= mechanism
+ (though it's more complicated than the per_byte equivalence). When it is
+ used in acl_smtp_rcpt, the per_rcpt option adds recipients to the
+ measured rate one at a time; if it is used later (e.g. in acl_smtp_data)
+ or in a non-SMTP ACL it adds all the recipients in one go. (The latter
+ /count=$recipients_count behaviour used to work only in non-SMTP ACLs.)
+ Note that using per_rcpt with a non-readonly update mode in more than
+ one ACL will cause the recipients to be double-counted. (The per_mail
+ and per_byte options don't have this problem.)
+
+ The handling of very low rates has changed slightly. If the computed rate
+ is less than the event's count (usually one) then this event is the first
+ after a long gap. In this case the rate is set to the same as this event's
+ count, so that the first message of a spam run is counted properly.
+
+ The major new feature is a mechanism for counting the rate of unique
+ events. The new per_addr option counts the number of different
+ recipients that someone has sent messages to in the last time period. It
+ behaves like per_rcpt if all the recipient addresses are different, but
+ duplicate recipient addresses do not increase the measured rate. Like
+ the /count= option this is a general mechanism, so the per_addr option
+ is equivalent to per_rcpt/unique=$local_part@$domain. You can, for
+ example, measure the rate that a client uses different sender addresses
+ with the options per_mail/unique=$sender_address. There are further
+ details in the main documentation.
+
+TF/05 Removed obsolete $Cambridge$ CVS revision strings.
+
+TF/06 Removed a few PCRE remnants.
+
+TF/07 Automatically extract Exim's version number from tags in the git
+ repository when doing development or release builds.
+
+PP/02 Raise smtp_cmd_buffer_size to 16kB.
+ Bugzilla 879. Patch from Paul Fisher.
+
+PP/03 Implement SSL-on-connect outbound with protocol=smtps on smtp transport.
+ Heavily based on revision 40f9a89a from Simon Arlott's tree.
+ Bugzilla 97.
+
+PP/04 Use .dylib instead of .so for dynamic library loading on MacOS.
+
+PP/05 Variable $av_failed, true if the AV scanner deferred.
+ Bugzilla 1078. Patch from John Horne.
+
+PP/06 Stop make process more reliably on build failure.
+ Bugzilla 1087. Patch from Heiko Schlittermann.
+
+PP/07 Make maildir_use_size_file an _expandable_ boolean.
+ Bugzilla 1089. Patch from Heiko Schlittermann.
+
+PP/08 Handle ${run} returning more data than OS pipe buffer size.
+ Bugzilla 1131. Patch from Holger Weiß.
+
+PP/09 Handle IPv6 addresses with SPF.
+ Bugzilla 860. Patch from Wolfgang Breyha.
+
+PP/10 GnuTLS: support TLS 1.2 & 1.1.
+ Bugzilla 1156.
+ Use gnutls_certificate_verify_peers2() [patch from Andreas Metzler].
+ Bugzilla 1095.
+
+PP/11 match_* no longer expand right-hand-side by default.
+ New compile-time build option, EXPAND_LISTMATCH_RHS.
+ New expansion conditions, "inlist", "inlisti".
+
+PP/12 fix uninitialised greeting string from PP/03 (smtps client support).
+
+PP/13 shell and compiler warnings fixes for RC1-RC4 changes.
+
+PP/14 fix log_write() format string regression from TF/03.
+ Bugzilla 1152. Patch from Dmitry Isaikin.
+
+
+Exim version 4.76
+-----------------
+
+PP/01 The new ldap_require_cert option would segfault if used. Fixed.
+
+PP/02 Harmonised TLS library version reporting; only show if debugging.
+ Layout now matches that introduced for other libraries in 4.74 PP/03.
+
+PP/03 New openssl_options items: no_sslv2 no_sslv3 no_ticket no_tlsv1
+
+PP/04 New "dns_use_edns0" global option.
+
+PP/05 Don't segfault on misconfiguration of ref:name exim-user as uid.
+ Bugzilla 1098.
+
+PP/06 Extra paranoia around buffer usage at the STARTTLS transition.
+ nb: Exim is not vulnerable to http://www.kb.cert.org/vuls/id/555316
+
+TK/01 Updated PolarSSL code to 0.14.2.
+ Bugzilla 1097. Patch from Andreas Metzler.
+
+PP/07 Catch divide-by-zero in ${eval:...}.
+ Fixes bugzilla 1102.
+
+PP/08 Condition negation of bool{}/bool_lax{} did not negate. Fixed.
+ Bugzilla 1104.
+
+TK/02 Bugzilla 1106: CVE-2011-1764 - DKIM log line was subject to a
+ format-string attack -- SECURITY: remote arbitrary code execution.
+
+TK/03 SECURITY - DKIM signature header parsing was double-expanded, second
+ time unintentionally subject to list matching rules, letting the header
+ cause arbitrary Exim lookups (of items which can occur in lists, *not*
+ arbitrary string expansion). This allowed for information disclosure.
+
+PP/09 Fix another SIGFPE (x86) in ${eval:...} expansion, this time related to
+ INT_MIN/-1 -- value coerced to INT_MAX.
+
+
+Exim version 4.75
+-----------------
+
+NM/01 Workround for PCRE version dependency in version reporting
+ Bugzilla 1073
+
+TF/01 Update valgrind.h and memcheck.h to copies from valgrind-3.6.0.
+ This fixes portability to compilers other than gcc, notably
+ Solaris CC and HP-UX CC. Fixes Bugzilla 1050.
+
+TF/02 Bugzilla 139: Avoid using the += operator in the modular lookup
+ makefiles for portability to HP-UX and POSIX correctness.
+
+PP/01 Permit LOOKUP_foo enabling on the make command-line.
+ Also via indented variable definition in the Makefile.
+ (Debugging by Oliver Heesakkers).
+
+PP/02 Restore caching of spamd results with expanded spamd_address.
+ Patch from author of expandable spamd_address patch, Wolfgang Breyha.
+
+PP/03 Build issue: lookups-Makefile now exports LC_ALL=C
+ Improves build reliability. Fix from: Frank Elsner
+
+NM/02 Fix wide character breakage in the rfc2047 coding
+ Fixes bug 1064. Patch from Andrey N. Oktyabrski
+
+NM/03 Allow underscore in dnslist lookups
+ Fixes bug 1026. Patch from Graeme Fowler
+
+PP/04 Bugzilla 230: Support TLS-enabled LDAP (in addition to ldaps).
+ Code patches from Adam Ciarcinski of NetBSD.
+
+NM/04 Fixed exiqgrep to cope with mailq missing size issue
+ Fixes bug 943.
+
+PP/05 Bugzilla 1083: when lookup expansion defers, escape the output which
+ is logged, to avoid truncation. Patch from John Horne.
+
+PP/06 Bugzilla 1042: implement freeze_signal on pipe transports.
+ Patch from Jakob Hirsch.
+
+PP/07 Bugzilla 1061: restrict error messages sent over SMTP to not reveal
+ SQL string expansion failure details.
+ Patch from Andrey Oktyabrski.
+
+PP/08 Bugzilla 486: implement %M datestamping in log filenames.
+ Patch from Simon Arlott.
+
+PP/09 New lookups functionality failed to compile on old gcc which rejects
+ extern declarations in function scope.
+ Patch from Oliver Fleischmann
+
+PP/10 Use sig_atomic_t for flags set from signal handlers.
+ Check getgroups() return and improve debugging.
+ Fixed developed for diagnosis in bug 927 (which turned out to be
+ a kernel bug).
+
+PP/11 Bugzilla 1055: Update $message_linecount for maildir_tag.
+ Patch from Mark Zealey.
+
+PP/12 Bugzilla 1056: Improved spamd server selection.
+ Patch from Mark Zealey.
+
+PP/13 Bugzilla 1086: Deal with maildir quota file races.
+ Based on patch from Heiko Schlittermann.
+
+PP/14 Bugzilla 1019: DKIM multiple signature generation fix.
+ Patch from Uwe Doering, sign-off by Michael Haardt.
+
+NM/05 Fix to spam.c to accommodate older gcc versions which dislike
+ variable declaration deep within a block. Bug and patch from
+ Dennis Davis.
+
+PP/15 lookups-Makefile IRIX compatibilty coercion.
+
+PP/16 Make DISABLE_DKIM build knob functional.
+
+NM/06 Bugzilla 968: child_open_uid: restore default SIGPIPE handler
+ Patch by Simon Arlott
+
+TF/03 Fix valgrind.h portability to C89 compilers that do not support
+ variable argument macros. Our copy now differs from upstream.
+
+
+Exim version 4.74
+-----------------
+
+TF/01 Failure to get a lock on a hints database can have serious
+ consequences so log it to the panic log.
+
+TF/02 Log LMTP confirmation messages in the same way as SMTP,
+ controlled using the smtp_confirmation log selector.
+
+TF/03 Include the error message when we fail to unlink a spool file.
+
+DW/01 Bugzilla 139: Support dynamically loaded lookups as modules.
+ With thanks to Steve Haslam, Johannes Berg & Serge Demonchaux
+ for maintaining out-of-tree patches for some time.
+
+PP/01 Bugzilla 139: Documentation and portability issues.
+ Avoid GNU Makefile-isms, let Exim continue to build on BSD.
+ Handle per-OS dynamic-module compilation flags.
+
+PP/02 Let /dev/null have normal permissions.
+ The 4.73 fixes were a little too stringent and complained about the
+ permissions on /dev/null. Exempt it from some checks.
+ Reported by Andreas M. Kirchwitz.
+
+PP/03 Report version information for many libraries, including
+ Exim version information for dynamically loaded libraries. Created
+ version.h, now support a version extension string for distributors
+ who patch heavily. Dynamic module ABI change.
+
+PP/04 CVE-2011-0017 - check return value of setuid/setgid. This is a
+ privilege escalation vulnerability whereby the Exim run-time user
+ can cause root to append content of the attacker's choosing to
+ arbitrary files.
+
+PP/05 Bugzilla 1041: merged DCC maintainer's fixes for return code.
+ (Wolfgang Breyha)
+
+PP/06 Bugzilla 1071: fix delivery logging with untrusted macros.
+ If dropping privileges for untrusted macros, we disabled normal logging
+ on the basis that it would fail; for the Exim run-time user, this is not
+ the case, and it resulted in successful deliveries going unlogged.
+ Fixed. Reported by Andreas Metzler.
+
+
+Exim version 4.73
+-----------------
+
+PP/01 Date: & Message-Id: revert to normally being appended to a message,
+ only prepend for the Resent-* case. Fixes regression introduced in
+ Exim 4.70 by NM/22 for Bugzilla 607.
+
+PP/02 Include check_rfc2047_length in configure.default because we're seeing
+ increasing numbers of administrators be bitten by this.
+
+JJ/01 Added DISABLE_DKIM and comment to src/EDITME
+
+PP/03 Bugzilla 994: added openssl_options main configuration option.
+
+PP/04 Bugzilla 995: provide better SSL diagnostics on failed reads.
+
+PP/05 Bugzilla 834: provide a permit_coredump option for pipe transports.
+
+PP/06 Adjust NTLM authentication to handle SASL Initial Response.
+
+PP/07 If TLS negotiated an anonymous cipher, we could end up with SSL but
+ without a peer certificate, leading to a segfault because of an
+ assumption that peers always have certificates. Be a little more
+ paranoid. Problem reported by Martin Tscholak.
+
+PP/08 Bugzilla 926: switch ClamAV to use the new zINSTREAM API for content
+ filtering; old API available if built with WITH_OLD_CLAMAV_STREAM=yes
+ NB: ClamAV planning to remove STREAM in "middle of 2010".
+ CL also introduces -bmalware, various -d+acl logging additions and
+ more caution in buffer sizes.
+
+PP/09 Implemented reverse_ip expansion operator.
+
+PP/10 Bugzilla 937: provide a "debug" ACL control.
+
+PP/11 Bugzilla 922: Documentation dusting, patch provided by John Horne.
+
+PP/12 Bugzilla 973: Implement --version.
+
+PP/13 Bugzilla 752: Refuse to build/run if Exim user is root/0.
+
+PP/14 Build without WITH_CONTENT_SCAN. Path from Andreas Metzler.
+
+PP/15 Bugzilla 816: support multiple condition rules on Routers.
+
+PP/16 Add bool_lax{} expansion operator and use that for combining multiple
+ condition rules, instead of bool{}. Make both bool{} and bool_lax{}
+ ignore trailing whitespace.
+
+JJ/02 prevent non-panic DKIM error from being sent to paniclog
+
+JJ/03 added tcp_wrappers_daemon_name to allow host entries other than
+ "exim" to be used
+
+PP/17 Fix malware regression for cmdline scanner introduced in PP/08.
+ Notification from Dr Andrew Aitchison.
+
+PP/18 Change ClamAV response parsing to be more robust and to handle ClamAV's
+ ExtendedDetectionInfo response format.
+ Notification from John Horne.
+
+PP/19 OpenSSL 1.0.0a compatibility const-ness change, should be backwards
+ compatible.
+
+PP/20 Added a CONTRIBUTING file. Fixed the documentation build to use http:
+ XSL and documented dependency on system catalogs, with examples of how
+ it normally works.
+
+DW/21 Added Valgrind hooks in store.c to help it capture out-of-bounds store
+ access.
+
+DW/22 Bugzilla 1044: CVE-2010-4345 - partial fix: restrict default behaviour
+ of CONFIGURE_OWNER and CONFIGURE_GROUP options to no longer allow a
+ configuration file which is writeable by the Exim user or group.
+
+DW/23 Bugzilla 1044: CVE-2010-4345 - part two: extend checks for writeability
+ of configuration files to cover files specified with the -C option if
+ they are going to be used with root privileges, not just the default
+ configuration file.
+
+DW/24 Bugzilla 1044: CVE-2010-4345 - part three: remove ALT_CONFIG_ROOT_ONLY
+ option (effectively making it always true).
+
+DW/25 Add TRUSTED_CONFIG_PREFIX_FILE option to allow alternative configuration
+ files to be used while preserving root privileges.
+
+DW/26 Set FD_CLOEXEC on SMTP sockets after forking in the daemon, to ensure
+ that rogue child processes cannot use them.
+
+PP/27 Bugzilla 1047: change the default for system_filter_user to be the Exim
+ run-time user, instead of root.
+
+PP/28 Add WHITELIST_D_MACROS option to let some macros be overridden by the
+ Exim run-time user without dropping privileges.
+
+DW/29 Remove use of va_copy() which breaks pre-C99 systems. Duplicate the
+ result string, instead of calling string_vformat() twice with the same
+ arguments.
+
+DW/30 Allow TRUSTED_CONFIG_PREFIX_FILE only for Exim or CONFIGURE_OWNER, not
+ for other users. Others should always drop root privileges if they use
+ -C on the command line, even for a whitelisted configure file.
+
+DW/31 Turn TRUSTED_CONFIG_PREFIX_FILE into TRUSTED_CONFIG_FILE. No prefixes.
+
+NM/01 Fixed bug #1002 - Message loss when using multiple deliveries
+
+
+Exim version 4.72
+-----------------
+
+JJ/01 installed exipick 20100104.1, adding $max_received_linelength,
+ $data_path, and $header_path variables; fixed documentation bugs and
+ typos
+
+JJ/02 installed exipick 20100222.0, added --input-dir and --finput to allow
+ exipick to access non-standard spools, including the "frozen" queue
+ (Finput)
+
+NM/01 Bugzilla 965: Support mysql stored procedures.
+ Patch from Alain Williams
+
+NM/02 Bugzilla 961: Spacing fix (syntax error) on Makefile directives for NetBSD
+
+NM/03 Bugzilla 955: Documentation fix for max_rcpts.
+ Patch from Andreas Metzler
+
+NM/04 Bugzilla 954: Fix for unknown responses from Dovecot authenticator.
+ Patch from Kirill Miazine
+
+NM/05 Bugzilla 671: Added umask to procmail example.
+
+JJ/03 installed exipick 20100323.0, fixing doc bug
+
+NM/06 Bugzilla 988: CVE-2010-2023 - prevent hardlink attack on sticky mail
+ directory. Notification and patch from Dan Rosenberg.
+
+TK/01 PDKIM: Upgrade PolarSSL files to upstream version 0.12.1.
+
+TK/02 Improve log output when DKIM signing operation fails.
+
+MH/01 Treat the transport option dkim_domain as a colon separated
+ list, not as a single string, and sign the message with each element,
+ omitting multiple occurences of the same signer.
+
+NM/07 Null terminate DKIM strings, Null initialise DKIM variable
+ Bugzilla 985, 986. Patch by Simon Arlott
+
+NM/08 Bugzilla 967. dnsdb DNS TXT record bug fix (DKIM-related)
+ Patch by Simon Arlott
+
+PP/01 Bugzilla 989: CVE-2010-2024 - work round race condition on
+ MBX locking. Notification from Dan Rosenberg.
+
+
+Exim version 4.71
+-----------------
+
+TK/01 Bugzilla 912: Fix DKIM segfault on empty headers/body.
+
+NM/01 Bugzilla 913: Documentation fix for gnutls_* options.
+
+NM/02 Bugzilla 722: Documentation for randint. Better randomness defaults.
+
+NM/03 Bugzilla 847: Enable DNSDB lookup by default.
+
+NM/04 Bugzilla 915: Flag broken perl installation during build.
+
+
+Exim version 4.70
+-----------------
+
+TK/01 Added patch by Johannes Berg that expands the main option
+ "spamd_address" if it starts with a dollar sign.
+
+TK/02 Write list of recipients to X-Envelope-Sender header when building
+ the mbox-format spool file for content scanning (suggested by Jakob
+ Hirsch).
+
+TK/03 Added patch by Wolfgang Breyha that adds experimental DCC
+ (http://www.dcc-servers.net/) support via dccifd. Activated by
+ setting EXPERIMENTAL_DCC=yes in Local/Makefile.
+
+TK/04 Bugzilla 673: Add f-protd malware scanner support. Patch submitted
+ by Mark Daniel Reidel <mr@df.eu>.
+
+NM/01 Bugzilla 657: Embedded PCRE removed from the exim source tree.
+ When building exim an external PCRE library is now needed -
+ PCRE is a system library on the majority of modern systems.
+ See entry on PCRE_LIBS in EDITME file.
+
+NM/02 Bugzilla 646: Removed unwanted C/R in Dovecot authenticator
+ conversation. Added nologin parameter to request.
+ Patch contributed by Kirill Miazine.
+
+TF/01 Do not log submission mode rewrites if they do not change the address.
+
+TF/02 Bugzilla 662: Fix stack corruption before exec() in daemon.c.
+
+NM/03 Bugzilla 602: exicyclog now handles panic log, and creates empty
+ log files in place. Contributed by Roberto Lima.
+
+NM/04 Bugzilla 667: Close socket used by dovecot authenticator.
+
+TF/03 Bugzilla 615: When checking the local_parts router precondition
+ after a local_part_suffix or local_part_prefix option, Exim now
+ does not use the address's named list lookup cache, since this
+ contains cached lookups for the whole local part.
+
+NM/05 Bugzilla 521: Integrated SPF Best Guess support contributed by
+ Robert Millan. Documentation is in experimental-spec.txt.
+
+TF/04 Bugzilla 668: Fix parallel build (make -j).
+
+NM/05.2 Bugzilla 437: Prevent Maildir aux files being created with mode 000.
+
+NM/05.3 Bugzilla 598: Improvement to Dovecot authenticator handling.
+ Patch provided by Jan Srzednicki.
+
+TF/05 Leading white space used to be stripped from $spam_report which
+ wrecked the formatting. Now it is preserved.
+
+TF/06 Save $spam_score, $spam_bar, and $spam_report in spool files, so
+ that they are available at delivery time.
+
+TF/07 Fix the way ${extract is skipped in the untaken branch of a conditional.
+
+TF/08 TLS error reporting now respects the incoming_interface and
+ incoming_port log selectors.
+
+TF/09 Produce a more useful error message if an SMTP transport's hosts
+ setting expands to an empty string.
+
+NM/06 Bugzilla 744: EXPN did not work under TLS.
+ Patch provided by Phil Pennock.
+
+NM/07 Bugzilla 769: Extraneous comma in usage fprintf
+ Patch provided by Richard Godbee.
+
+NM/08 Fixed erroneous documentation references to smtp_notquit_acl to be
+ acl_smtp_notquit, added index entry.
+
+NM/09 Bugzilla 787: Potential buffer overflow in string_format.
+ Patch provided by Eugene Bujak.
+
+NM/10 Bugzilla 770: Problem on some platforms modifying the len parameter to
+ accept(). Patch provided by Maxim Dounin.
+
+NM/11 Bugzilla 749: Preserve old behaviour of blanks comparing equal to zero.
+ Patch provided by Phil Pennock.
+
+NM/12 Bugzilla 497: Correct behaviour of exiwhat when no config exists.
+
+NM/13 Bugzilla 590: Correct handling of Resent-Date headers.
+ Patch provided by Brad "anomie" Jorsch.
+
+NM/14 Bugzilla 622: Added timeout setting to transport filter.
+ Patch provided by Dean Brooks.
+
+TK/05 Add native DKIM support (does not depend on external libraries).
+
+NM/15 Bugzilla 854: Removed code that symlinks to pcre as its no longer useful.
+ Patch provided by Graeme Fowler.
+
+NM/16 Bugzilla 851: Documentation example syntax fix.
+
+NM/17 Changed NOTICE file to remove references to embedded PCRE.
+
+NM/18 Bugzilla 894: Fix issue with very long lines including comments in
+ lsearch.
+
+NM/19 Bugzilla 745: TLS version reporting.
+ Patch provided by Phil Pennock.
+
+NM/20 Bugzilla 167: bool: condition support.
+ Patch provided by Phil Pennock.
+
+NM/21 Bugzilla 665: gnutls_compat_mode to allow compatibility with broken
+ clients. Patch provided by Phil Pennock.
+
+NM/22 Bugzilla 607: prepend (not append) Resent-Message-ID and Resent-Date.
+ Patch provided by Brad "anomie" Jorsch.
+
+NM/23 Bugzilla 687: Fix misparses in eximstats.
+ Patch provided by Heiko Schlittermann.
+
+NM/24 Bugzilla 688: Fix exiwhat to handle log_selector = +pid.
+ Patch provided by Heiko Schlittermann.
+
+NM/25 Bugzilla 727: Use transport mode as default mode for maildirsize file.
+ plus update to original patch.
+
+NM/26 Bugzilla 799: Documentation correction for ratelimit.
+
+NM/27 Bugzilla 802: Improvements to local interface IP addr detection.
+ Patch provided by David Brownlee.
+
+NM/28 Bugzilla 807: Improvements to LMTP delivery logging.
+
+NM/29 Bugzilla 862, 866, 875: Documentation bugfixes.
+
+NM/30 Bugzilla 888: TLS documentation bugfixes.
+
+NM/31 Bugzilla 896: Dovecot buffer overrun fix.
+
+NM/32 Bugzilla 889: Change all instances of "expr" in shell scripts to "expr --"
+ Unlike the original bugzilla I have changed all shell scripts in src tree.
+
+NM/33 Bugzilla 898: Transport filter timeout fix.
+ Patch by Todd Rinaldo.
+
+NM/34 Bugzilla 901: Fix sign/unsigned and UTF mismatches.
+ Patch by Serge Demonchaux.
+
+NM/35 Bugzilla 39: Base64 decode bug fixes.
+ Patch by Jakob Hirsch.
+
+NM/36 Bugzilla 909: Correct connect() call in dcc code.
+
+NM/37 Bugzilla 910: Correct issue with relaxed/simple handling.
+
+NM/38 Bugzilla 908: Removed NetBSD3 support as no longer needed.
+
+NM/39 Bugzilla 911: Fixed MakeLinks build script.
+
+
+Exim version 4.69
+-----------------
+
+TK/01 Add preliminary DKIM support. Currently requires a forked version of
+ ALT-N's libdkim that I have put here:
+ http://duncanthrax.net/exim-experimental/
+
+ Note to Michael Haardt: I had to rename some vars in sieve.c. They
+ were called 'true' and it seems that C99 defines that as a reserved
+ keyword to be used with 'bool' variable types. That means you could
+ not include C99-style headers which use bools without triggering
+ build errors in sieve.c.
+
+NM/01 Bugzilla 592: --help option is handled incorrectly if exim is invoked
+ as mailq or other aliases. Changed the --help handling significantly
+ to do whats expected. exim_usage() emits usage/help information.
+
+SC/01 Added the -bylocaldomain option to eximstats.
+
+NM/02 Bugzilla 619: Defended against bad data coming back from gethostbyaddr.
+
+NM/03 Bugzilla 613: Documentation fix for acl_not_smtp.
+
+NM/04 Bugzilla 628: PCRE update to 7.4 (work done by John Hall).
+
+
+Exim version 4.68
+-----------------
+
+PH/01 Another patch from the Sieve maintainer.
+
+PH/02 When an IPv6 address is converted to a string for single-key lookup
+ in an address list (e.g. for an item such as "net24-dbm;/net/works"),
+ dots are used instead of colons so that keys in lsearch files need not
+ contain colons. This was done some time before quoting was made available
+ in lsearch files. However, iplsearch files do require colons in IPv6 keys
+ (notated using the quote facility) so as to distinguish them from IPv4
+ keys. This meant that lookups for IP addresses in host lists did not work
+ for iplsearch lookups.
+
+ This has been fixed by arranging for IPv6 addresses to be expressed with
+ colons if the lookup type is iplsearch. This is not incompatible, because
+ previously such lookups could never work.
+
+ The situation is now rather anomolous, since one *can* have colons in
+ ordinary lsearch keys. However, making the change in all cases is
+ incompatible and would probably break a number of configurations.
+
+TK/01 Change PRVS address formatting scheme to reflect latests BATV draft
+ version.
+
+MH/01 The "spam" ACL condition code contained a sscanf() call with a %s
+ conversion specification without a maximum field width, thereby enabling
+ a rogue spamd server to cause a buffer overflow. While nobody in their
+ right mind would setup Exim to query an untrusted spamd server, an
+ attacker that gains access to a server running spamd could potentially
+ exploit this vulnerability to run arbitrary code as the Exim user.
+
+TK/02 Bugzilla 502: Apply patch to make the SPF-Received: header use
+ $primary_hostname instead of what libspf2 thinks the hosts name is.
+
+MH/02 The dsearch lookup now uses lstat(2) instead of stat(2) to look for
+ a directory entry by the name of the lookup key. Previously, if a
+ symlink pointed to a non-existing file or a file in a directory that
+ Exim lacked permissions to read, a lookup for a key matching that
+ symlink would fail. Now it is enough that a matching directory entry
+ exists, symlink or not. (Bugzilla 503.)
+
+PH/03 The body_linecount and body_zerocount variables are now exported in the
+ local_scan API.
+
+PH/04 Added the $dnslist_matched variable.
+
+PH/05 Unset $tls_cipher and $tls_peerdn before making a connection as a client.
+ This means they are set thereafter only if the connection becomes
+ encrypted.
+
+PH/06 Added the client_condition to authenticators so that some can be skipped
+ by clients under certain conditions.
+
+PH/07 The error message for a badly-placed control=no_multiline_responses left
+ "_responses" off the end of the name.
+
+PH/08 Added -Mvc to output a copy of a message in RFC 2822 format.
+
+PH/09 Tidied the code for creating ratelimiting keys, creating them explicitly
+ (without spaces) instead of just copying the configuration text.
+
+PH/10 Added the /noupdate option to the ratelimit ACL condition.
+
+PH/11 Added $max_received_linelength.
+
+PH/12 Added +ignore_defer and +include_defer to host lists.
+
+PH/13 Installed PCRE version 7.2. This needed some changes because of the new
+ way in which PCRE > 7.0 is built.
+
+PH/14 Implemented queue_only_load_latch.
+
+PH/15 Removed an incorrect (int) cast when reading the value of SIZE in a
+ MAIL command. The effect was to mangle the value on 64-bit systems.
+
+PH/16 Another patch from the Sieve maintainer.
+
+PH/17 Added the NOTQUIT ACL, based on a patch from Ted Cooper.
+
+PH/18 If a system quota error occurred while trying to create the file for
+ a maildir delivery, the message "Mailbox is full" was not appended to the
+ bounce if the delivery eventually timed out. Change 4.67/27 below applied
+ only to a quota excession during the actual writing of the file.
+
+PH/19 It seems that peer DN values may contain newlines (and other non-printing
+ characters?) which causes problems in log lines. The DN values are now
+ passed through string_printing() before being added to log lines.
+
+PH/20 Added the "servers=" facility to MySQL and PostgreSQL lookups. (Oracle
+ and InterBase are left for another time.)
+
+PH/21 Added message_body_newlines option.
+
+PH/22 Guard against possible overflow in moan_check_errorcopy().
+
+PH/23 POSIX allows open() to be a macro; guard against that.
+
+PH/24 If the recipient of an error message contained an @ in the local part
+ (suitably quoted, of course), incorrect values were put in $domain and
+ $local_part during the evaluation of errors_copy.
+
+
+Exim version 4.67
+-----------------
+
+MH/01 Fix for bug #448, segfault in Dovecot authenticator when interface_address
+ is unset (happens when testing with -bh and -oMi isn't used). Thanks to
+ Jan Srzednicki.
+
+PH/01 Added a new log selector smtp_no_mail, to log SMTP sessions that do not
+ issue a MAIL command.
+
+PH/02 In an ACL statement such as
+
+ deny dnslists = X!=127.0.0.2 : X=127.0.0.2
+
+ if a client was not listed at all, or was listed with a value other than
+ 127.0.0.2, in the X list, but was listed with 127.0.0.2 in the Y list,
+ the condition was not true (as it should be), so access was not denied.
+ The bug was that the ! inversion was incorrectly passed on to the second
+ item. This has been fixed.
+
+PH/03 Added additional dnslists conditions == and =& which are different from
+ = and & when the dns lookup returns more than one IP address.
+
+PH/04 Added gnutls_require_{kx,mac,protocols} to give more control over the
+ cipher suites used by GnuTLS. These options are ignored by OpenSSL.
+
+PH/05 After discussion on the list, added a compile time option ENABLE_DISABLE_
+ FSYNC, which compiles an option called disable_fsync that allows for
+ bypassing fsync(). The documentation is heavily laced with warnings.
+
+SC/01 Updated eximstats to collate all SpamAssassin rejects into one bucket.
+
+PH/06 Some tidies to the infrastructure of the Test Suite that is concerned
+ with the auxiliary C programs that it uses: (1) Arrange for BIND_8_COMPAT
+ to be defined when compiling on OSX (Darwin); (2) Tidies to the Makefile,
+ including adding "make clean"; (3) Added -fPIC when compiling the test
+ dynamically loaded module, to get rid of a warning.
+
+MH/02 Fix for bug #451, causing paniclog entries to be written if a bounce
+ message fails, move_frozen_messages = true and ignore_bounce_errors_after
+ = 0s. The bug is otherwise harmless.
+
+PH/07 There was a bug in the dovecot authenticator such that the value of
+ $auth1 could be overwritten, and so not correctly preserved, after a
+ successful authentication. This usually meant that the value preserved by
+ the server_setid option was incorrect.
+
+PH/08 Added $smtp_count_at_connection_start, deliberately with a long name.
+
+PH/09 Installed PCRE release 7.0.
+
+PH/10 The acl_not_smtp_start ACL was, contrary to the documentation, not being
+ run for batched SMTP input. It is now run at the start of every message
+ in the batch. While fixing this I discovered that the process information
+ (output by running exiwhat) was not always getting set for -bs and -bS
+ input. This is fixed, and it now also says "batched" for BSMTP.
+
+PH/11 Added control=no_pipelining.
+
+PH/12 Added $sending_ip_address and $sending_port (mostly Magnus Holmgren's
+ patch, slightly modified), and move the expansion of helo_data till after
+ the connection is made in the smtp transport (so it can use these
+ values).
+
+PH/13 Added ${rfc2047d: to decoded RFC 2047 strings.
+
+PH/14 Added log_selector = +pid.
+
+PH/15 Flush SMTP output before delaying, unless control=no_delay_flush is set.
+
+PH/16 Add ${if forany and ${if forall.
+
+PH/17 Added dsn_from option to vary the From: line in DSNs.
+
+PH/18 Flush SMTP output before performing a callout, unless control =
+ no_callout_flush is set.
+
+PH/19 Change 4.64/PH/36 introduced a bug: when address_retry_include_sender
+ was true (the default) a successful delivery failed to delete the retry
+ item, thus causing premature timeout of the address. The bug is now
+ fixed.
+
+PH/20 Added hosts_avoid_pipelining to the smtp transport.
+
+PH/21 Long custom messages for fakedefer and fakereject are now split up
+ into multiline reponses in the same way that messages for "deny" and
+ other ACL rejections are.
+
+PH/22 Applied Jori Hamalainen's speed-up changes and typo fixes to exigrep,
+ with slight modification.
+
+PH/23 Applied sieve patches from the maintainer "tracking the latest notify
+ draft, changing the syntax and factoring some duplicate code".
+
+PH/24 When the log selector "outgoing_port" was set, the port was shown as -1
+ for deliveries of the second and subsequent messages over the same SMTP
+ connection.
+
+PH/25 Applied Magnus Holmgren's patch for ${addresses, ${map, ${filter, and
+ ${reduce, with only minor "tidies".
+
+SC/02 Applied Daniel Tiefnig's patch to improve the '($parent) =' pattern match.
+
+PH/26 Added a "continue" ACL modifier that does nothing, for the benefit of its
+ expansion side effects.
+
+PH/27 When a message times out after an over-quota error from an Exim-imposed
+ quota, the bounce message says "mailbox is full". This message was not
+ being given when it was a system quota that was exceeded. It now should
+ be the same.
+
+MH/03 Made $recipients available in local_scan(). local_scan() already has
+ better access to the recipient list through recipients_list[], but
+ $recipients can be useful in postmaster-provided expansion strings.
+
+PH/28 The $smtp_command and $smtp_command_argument variables were not correct
+ in the case of a MAIL command with additional options following the
+ address, for example: MAIL FROM:<foo@bar> SIZE=1234. The option settings
+ were accidentally chopped off.
+
+PH/29 SMTP synchronization checks are implemented when a command is read -
+ there is a check that no more input is waiting when there shouldn't be
+ any. However, for some commands, a delay in an ACL can mean that it is
+ some time before the response is written. In this time, more input might
+ arrive, invalidly. So now there are extra checks after an ACL has run for
+ HELO/EHLO and after the predata ACL, and likewise for MAIL and RCPT when
+ pipelining has not been advertised.
+
+PH/30 MH's patch to allow iscntrl() characters to be list separators.
+
+PH/31 Unlike :fail:, a custom message specified with :defer: was not being
+ returned in the SMTP response when smtp_return_error_details was false.
+ This has been fixed.
+
+PH/32 Change the Dovecot authenticator to use read() and write() on the socket
+ instead of the C I/O that was originally supplied, because problems were
+ reported on Solaris.
+
+PH/33 Compile failed with OpenSSL 0.9.8e. This was due to a coding error in
+ Exim which did not show up earlier: it was assuming that a call to
+ SSL_CTX_set_info_callback() might give an error value. In fact, there is
+ no error. In previous releases of OpenSSL, SSL_CTX_set_info_callback()
+ was a macro that became an assignment, so it seemed to work. This has
+ changed to a proper function call with a void return, hence the compile
+ error. Exim's code has been fixed.
+
+PH/34 Change HDA_SIZE in oracle.c from 256 to 512. This is needed for 64-bit
+ cpus.
+
+PH/35 Applied a patch from the Sieve maintainer which fixes a bug in "notify".
+
+PH/36 Applied John Jetmore's patch to add -v functionality to exigrep.
+
+PH/37 If a message is not accepted after it has had an id assigned (e.g.
+ because it turns out to be too big or there is a timeout) there is no
+ "Completed" line in the log. When some messages of this type were
+ selected by exigrep, they were listed as "not completed". Others were
+ picked up by some special patterns. I have improved the selection
+ criteria to be more general.
+
+PH/38 The host_find_failed option in the manualroute router can now be set
+ to "ignore", to completely ignore a host whose IP address cannot be
+ found. If all hosts are ignored, the behaviour is controlled by the new
+ host_all_ignored option.
+
+PH/39 In a list of hosts for manualroute, if one item (either because of multi-
+ homing or because of multiple MX records with /mx) generated more than
+ one IP address, and the following item turned out to be the local host,
+ all the secondary addresses of the first item were incorrectly removed
+ from the list, along with the local host and any following hosts (which
+ is what is supposed to happen).
+
+PH/40 When Exim receives a message, it writes the login name, uid, and gid of
+ whoever called Exim into the -H file. In the case of the daemon it was
+ behaving confusingly. When first started, it used values for whoever
+ started the daemon, but after a SIGHUP it used the Exim user (because it
+ calls itself on a restart). I have changed the code so that it now always
+ uses the Exim user.
+
+PH/41 (Following a suggestion from Tony Finch) If all the RCPT commands in a
+ message are rejected with the same error (e.g. no authentication or bad
+ sender address), and a DATA command is nevertheless sent (as can happen
+ with PIPELINING or a stupid MUA), the error message that was given to the
+ RCPT commands is included in the rejection of the DATA command. This is
+ intended to be helpful for MUAs that show only the final error to their
+ users.
+
+PH/42 Another patch from the Sieve maintainer.
+
+SC/02 Eximstats - Differentiate between permanent and temporary rejects.
+ Eximstats - Fixed some broken HTML links and added missing column headers
+ (Jez Hancock).
+ Eximstats - Fixed Grand Total Summary Domains, Edomains, and Email
+ columns for Rejects, Temp Rejects, Ham, and Spam rows.
+
+SC/03 Eximstats - V1.58 Fix to get <> and blackhole to show in edomain tables.
+
+PH/43 Yet another patch from the Sieve maintainer.
+
+PH/44 I found a way to check for a TCP/IP connection going away before sending
+ the response to the final '.' that terminates a message, but only in the
+ case where the client has not sent further data following the '.'
+ (unfortunately, this is allowed). However, in many cases there won't be
+ any further data because there won't be any more messages to send. A call
+ to select() can be used: if it shows that the input is "ready", there is
+ either input waiting, or the socket has been closed. An attempt to read
+ the next input character can distinguish the two cases. Previously, Exim
+ would have sent an OK response which the client would never have see.
+ This could lead to message repetition. This fix should cure that, at
+ least in a lot of common cases.
+
+PH/45 Do not advertise STARTTLS in response to HELP unless it would be
+ advertised in response to EHLO.
+
+
+Exim version 4.66
+-----------------
+
+PH/01 Two more bugs that were introduced by 4.64/PH/07, in addition to the one
+ fixed by 4.65/MH/01 (is this a record?) are fixed:
+
+ (i) An empty string was always treated as zero by the numeric comparison
+ operators. This behaviour has been restored.
+
+ (ii) It is documented that the numeric comparison operators always treat
+ their arguments as decimal numbers. This was broken in that numbers
+ starting with 0 were being interpreted as octal.
+
+ While fixing these problems I realized that there was another issue that
+ hadn't been noticed. Values of message_size_limit (both the global option
+ and the transport option) were treated as octal if they started with 0.
+ The documentation was vague. These values are now always treated as
+ decimal, and I will make that clear in the documentation.
+
+
+Exim version 4.65
+-----------------
+
+TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with
+ Linux large file support (_FILE_OFFSET_BITS=64) on older glibc
+ versions. (#438)
+
+MH/01 Don't check that the operands of numeric comparison operators are
+ integers when their expansion is in "skipping" mode (fixes bug
+ introduced by 4.64-PH/07).
+
+PH/01 If a system filter or a router generates more than SHRT_MAX (32767)
+ child addresses, Exim now panics and dies. Previously, because the count
+ is held in a short int, deliveries were likely to be lost. As such a
+ large number of recipients for a single message is ridiculous
+ (performance will be very, very poor), I have chosen to impose a limit
+ rather than extend the field.
+
+
+Exim version 4.64
+-----------------
+
+TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a
+ leftover -K file (the existence of which was triggered by #402).
+ While we were at it, introduced process PID as part of the -K
+ filename. This should rule out race conditions when creating
+ these files.
+
+TK/02 Bugzilla #402. Apply patch from Simon Arlott, speeding up DK signing
+ processing considerably. Previous code took too long for large mails,
+ triggering a timeout which in turn triggers #401.
+
+TK/03 Introduced HAVE_LINUX_SENDFILE to os.h-Linux. Currently only used
+ in the DK code in transports.c. sendfile() is not really portable,
+ hence the _LINUX specificness.
+
+TF/01 In the add_headers option to the mail command in an Exim filter,
+ there was a bug that Exim would claim a syntax error in any
+ header after the first one which had an odd number of characters
+ in the field name.
+
+PH/01 If a server that rejects MAIL FROM:<> was the target of a sender
+ callout verification, Exim cached a "reject" for the entire domain. This
+ is correct for most verifications, but it is not correct for a recipient
+ verification with use_sender or use_postmaster set, because in that case
+ the callout does not use MAIL FROM:<>. Exim now distinguishes the special
+ case of MAIL FROM:<> rejection from other early rejections (e.g.
+ rejection of HELO). When verifying a recipient using a non-null MAIL
+ address, the cache is ignored if it shows MAIL FROM:<> rejection.
+ Whatever the result of the callout, the value of the domain cache is
+ left unchanged (for any other kind of callout, getting as far as trying
+ RCPT means that the domain itself is ok).
+
+PH/02 Tidied a number of unused variable and signed/unsigned warnings that
+ gcc 4.1.1 threw up.
+
+PH/03 On Solaris, an unexpectedly close socket (dropped connection) can
+ manifest itself as EPIPE rather than ECONNECT. When tidying away a
+ session, the daemon ignores ECONNECT errors and logs others; it now
+ ignores EPIPE as well.
+
+PH/04 Applied Nico Erfurth's refactoring patch to tidy up mime.c
+ (quoted-printable decoding).
+
+PH/05 Applied Nico Erfurth's refactoring patch to tidy up spool_mbox.c, and
+ later the small subsequent patch to fix an introduced bug.
+
+PH/06 Installed the latest Cygwin Makefile from the Cygwin maintainer.
+
+PH/07 There was no check for overflow in expansions such as ${if >{1}{4096M}}.
+
+PH/08 An error is now given if message_size_limit is specified negative.
+
+PH/09 Applied and tidied up Jakob Hirsch's patch for allowing ACL variables
+ to be given (somewhat) arbitrary names.
+
+JJ/01 exipick 20060919.0, allow for arbitrary acl_ variables introduced
+ in 4.64-PH/09.
+
+JJ/02 exipick 20060919.0, --show-vars args can now be regular expressions,
+ miscellaneous code fixes
+
+PH/10 Added the log_reject_target ACL modifier to specify where to log
+ rejections.
+
+PH/11 Callouts were setting the name used for EHLO/HELO from $smtp_active_
+ hostname. This is wrong, because it relates to the incoming message (and
+ probably the interface on which it is arriving) and not to the outgoing
+ callout (which could be using a different interface). This has been
+ changed to use the value of the helo_data option from the smtp transport
+ instead - this is what is used when a message is actually being sent. If
+ there is no remote transport (possible with a router that sets up host
+ addresses), $smtp_active_hostname is used.
+
+PH/12 Installed Andrey Panin's patch to add a dovecot authenticator. Various
+ tweaks were necessary in order to get it to work (see also 21 below):
+ (a) The code assumed that strncpy() returns a negative number on buffer
+ overflow, which isn't the case. Replaced with Exim's string_format()
+ function.
+ (b) There were several signed/unsigned issues. I just did the minimum
+ hacking in of casts. There is scope for a larger refactoring.
+ (c) The code used strcasecmp() which is not a standard C function.
+ Replaced with Exim's strcmpic() function.
+ (d) The code set only $1; it now sets $auth1 as well.
+ (e) A simple test gave the error "authentication client didn't specify
+ service in request". It would seem that Dovecot has changed its
+ interface. Fortunately there's a specification; I followed it and
+ changed what the client sends and it appears to be working now.
+
+PH/13 Added $message_headers_raw to provide the headers without RFC 2047
+ decoding.
+
+PH/14 Corrected misleading output from -bv when -v was also used. Suppose the
+ address A is aliased to B and C, where B exists and C does not. Without
+ -v the output is "A verified" because verification stops after a
+ successful redirection if more than one address is generated. However,
+ with -v the child addresses are also verified. Exim was outputting "A
+ failed to verify" and then showing the successful verification for C,
+ with its parentage. It now outputs "B failed to verify", showing B's
+ parentage before showing the successful verification of C.
+
+PH/15 Applied Michael Deutschmann's patch to allow DNS black list processing to
+ look up a TXT record in a specific list after matching in a combined
+ list.
+
+PH/16 It seems that the options setting for the resolver (RES_DEFNAMES and
+ RES_DNSRCH) can affect the behaviour of gethostbyname() and friends when
+ they consult the DNS. I had assumed they would set it the way they
+ wanted; and indeed my experiments on Linux seem to show that in some
+ cases they do (I could influence IPv6 lookups but not IPv4 lookups).
+ To be on the safe side, however, I have now made the interface to
+ host_find_byname() similar to host_find_bydns(), with an argument
+ containing the DNS resolver options. The host_find_byname() function now
+ sets these options at its start, just as host_find_bydns() does. The smtp
+ transport options dns_qualify_single and dns_search_parents are passed to
+ host_find_byname() when gethostbyname=TRUE in this transport. Other uses
+ of host_find_byname() use the default settings of RES_DEFNAMES
+ (qualify_single) but not RES_DNSRCH (search_parents).
+
+PH/17 Applied (a modified version of) Nico Erfurth's patch to make
+ spool_read_header() do less string testing, by means of a preliminary
+ switch on the second character of optional "-foo" lines. (This is
+ overdue, caused by the large number of possibilities that now exist.
+ Originally there were few.) While I was there, I also converted the
+ str(n)cmp tests so they don't re-test the leading "-" and the first
+ character, in the hope this might squeeze out yet more improvement.
+
+PH/18 Two problems with "group" syntax in header lines when verifying: (1) The
+ flag allowing group syntax was set by the header_syntax check but not
+ turned off, possible causing trouble later; (2) The flag was not being
+ set at all for the header_verify test, causing "group"-style headers to
+ be rejected. I have now set it in this case, and also caused header_
+ verify to ignore an empty address taken from a group. While doing this, I
+ came across some other cases where the code for allowing group syntax
+ while scanning a header line wasn't quite right (mostly, not resetting
+ the flag correctly in the right place). These bugs could have caused
+ trouble for malformed header lines. I hope it is now all correct.
+
+PH/19 The functions {pwcheck,saslauthd}_verify_password() are always called
+ with the "reply" argument non-NULL. The code, however (which originally
+ came from elsewhere) had *some* tests for NULL when it wrote to *reply,
+ but it didn't always do it. This confused somebody who was copying the
+ code for some other use. I have removed all the tests.
+
+PH/20 It was discovered that the GnuTLS code had support for RSA_EXPORT, a
+ feature that was used to support insecure browsers during the U.S. crypto
+ embargo. It requires special client support, and Exim is probably the
+ only MTA that supported it -- and would never use it because real RSA is
+ always available. This code has been removed, because it had the bad
+ effect of slowing Exim down by computing (never used) parameters for the
+ RSA_EXPORT functionality.
+
+PH/21 On the advice of Timo Sirainen, added a check to the dovecot
+ authenticator to fail if there's a tab character in the incoming data
+ (there should never be unless someone is messing about, as it's supposed
+ to be base64-encoded). Also added, on Timo's advice, the "secured" option
+ if the connection is using TLS or if the remote IP is the same as the
+ local IP, and the "valid-client-cert option" if a client certificate has
+ been verified.
+
+PH/22 As suggested by Dennis Davis, added a server_condition option to *all*
+ authenticators. This can be used for authorization after authentication
+ succeeds. (In the case of plaintext, it servers for both authentication
+ and authorization.)
+
+PH/23 Testing for tls_required and lost_connection in a retry rule didn't work
+ if any retry times were supplied.
+
+PH/24 Exim crashed if verify=helo was activated during an incoming -bs
+ connection, where there is no client IP address to check. In this
+ situation, the verify now always succeeds.
+
+PH/25 Applied John Jetmore's -Mset patch.
+
+PH/26 Added -bem to be like -Mset, but loading a message from a file.
+
+PH/27 In a string expansion for a processed (not raw) header when multiple
+ headers of the same name were present, leading whitespace was being
+ removed from all of them, but trailing whitespace was being removed only
+ from the last one. Now trailing whitespace is removed from each header
+ before concatenation. Completely empty headers in a concatenation (as
+ before) are ignored.
+
+PH/28 Fixed bug in backwards-compatibility feature of PH/09 (thanks to John
+ Jetmore). It would have mis-read ACL variables from pre-4.61 spool files.
+
+PH/29 [Removed. This was a change that I later backed out, and forgot to
+ correct the ChangeLog entry (that I had efficiently created) before
+ committing the later change.]
+
+PH/30 Exim was sometimes attempting to deliver messages that had suffered
+ address errors (4xx response to RCPT) over the same connection as other
+ messages routed to the same hosts. Such deliveries are always "forced",
+ so retry times are not inspected. This resulted in far too many retries
+ for the affected addresses. The effect occurred only when there were more
+ hosts than the hosts_max_try setting in the smtp transport when it had
+ the 4xx errors. Those hosts that it had tried were not added to the list
+ of hosts for which the message was waiting, so if all were tried, there
+ was no problem. Two fixes have been applied:
+
+ (i) If there are any address or message errors in an SMTP delivery, none
+ of the hosts (tried or untried) are now added to the list of hosts
+ for which the message is waiting, so the message should not be a
+ candidate for sending over the same connection that was used for a
+ successful delivery of some other message. This seems entirely
+ reasonable: after all the message is NOT "waiting for some host".
+ This is so "obvious" that I'm not sure why it wasn't done
+ previously. Hope I haven't missed anything, but it can't do any
+ harm, as the worst effect is to miss an optimization.
+
+ (ii) If, despite (i), such a delivery is accidentally attempted, the
+ routing retry time is respected, so at least it doesn't keep
+ hammering the server.
+
+PH/31 Installed Andrew Findlay's patch to close the writing end of the socket
+ in ${readsocket because some servers need this prod.
+
+PH/32 Added some extra debug output when updating a wait-xxx database.
+
+PH/33 The hint "could be header name not terminated by colon", which has been
+ given for certain expansion errors for a long time, was not being given
+ for the ${if def:h_colon_omitted{... case.
+
+PH/34 The spec says: "With one important exception, whenever a domain list is
+ being scanned, $domain contains the subject domain." There was at least
+ one case where this was not true.
+
+PH/35 The error "getsockname() failed: connection reset by peer" was being
+ written to the panic log as well as the main log, but it isn't really
+ panic-worthy as it just means the connection died rather early on. I have
+ removed the panic log writing for the ECONNRESET error when getsockname()
+ fails.
+
+PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue
+ runs only) independently of the message's sender address. This meant
+ that, if the 4xx error was in fact related to the sender, a different
+ message to the same recipient with a different sender could confuse
+ things. In particualar, this can happen when sending to a greylisting
+ server, but other circumstances could also provoke similar problems.
+ I have changed the default so that the retry time for these errors is now
+ based a combination of the sender and recipient addresses. This change
+ can be overridden by setting address_retry_include_sender=false in the
+ smtp transport.
+
+PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the
+ remote server are returned as part of bounce messages. This was not
+ happening for LMTP over a pipe (the lmtp transport), but now it is the
+ same for both kinds of LMTP.
+
+PH/38 Despite being documented as not happening, Exim was rewriting addresses
+ in header lines that were in fact CNAMEs. This is no longer the case.
+
+PH/39 If -R or -S was given with -q<time>, the effect of -R or -S was ignored,
+ and queue runs started by the daemon processed all messages. This has
+ been fixed so that -R and -S can now usefully be given with -q<time>.
+
+PH/40 Import PCRE release 6.7 (fixes some bugs).
+
+PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch).
+
+PH/42 Give an error if -q is specified more than once.
+
+PH/43 Renamed the variables $interface_address and $interface_port as
+ $received_ip_address and $received_port, to make it clear that these
+ values apply to message reception, and not to the outgoing interface when
+ a message is delivered. (The old names remain recognized, of course.)
+
+PH/44 There was no timeout on the connect() call when using a Unix domain
+ socket in the ${readsocket expansion. There now is.
+
+PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to
+ be meaningful with "accept".
+
+SC/01 Eximstats V1.43
+ Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear.
+
+SC/02 Eximstats V1.44
+ Use a glob alias rather than an array ref in the generated
+ parser. This improves both readability and performance.
+
+SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell)
+ Collect SpamAssassin and rejection statistics.
+ Don't display local sender or destination tables unless
+ there is data to show.
+ Added average volumes into the top table text output.
+
+SC/04 Eximstats V1.46
+ Collect data on the number of addresses (recipients)
+ as well as the number of messages.
+
+SC/05 Eximstats V1.47
+ Added 'Message too big' to the list of mail rejection
+ reasons (thanks to Marco Gaiarin).
+
+SC/06 Eximstats V1.48
+ Mainlog lines which have GMT offsets and are too short to
+ have a flag are now skipped.
+
+SC/07 Eximstats V1.49 (Alain Williams)
+ Added the -emptyok flag.
+
+SC/08 Eximstats V1.50
+ Fixes for obtaining the IP address from reject messages.
+
+JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
+ (added [br]h_ prefixes, implemented RFC2047 decoding. Fixed
+ whitesspace changes from 4.64-PH/27
+
+JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
+ match 4.64-PH/13
+
+JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria
+ are found, allow negative numbers in numeric criteria)
+
+JJ/06 exipick.20061117.2, added new $message_body_missing variable
+
+JJ/07 exipick.20061117.2, added $received_ip_address and $received_port
+ to match changes made in 4.64-PH/43
+
+PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm.
+
+PH/47 Put in an explicit test for a DNS lookup of an address record where the
+ "domain" is actually an IP address, and force a failure. This locks out
+ those revolvers/nameservers that support "A-for-A" lookups, in
+ contravention of the specifications.
+
+PH/48 When a host name was looked up from an IP address, and the subsequent
+ forward lookup of the name timed out, the host name was left in
+ $sender_host_name, contrary to the specification.
+
+PH/49 Although default lookup types such as lsearch* or cdb*@ have always been
+ restricted to single-key lookups, Exim was not diagnosing an error if
+ * or *@ was used with a query-style lookup.
+
+PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024.
+
+MH/01 local_scan ABI version incremented to 1.1. It should have been updated
+ long ago, but noone interested enough thought of it. Let's just say that
+ the "1.1" means that there are some new functions that weren't there at
+ some point in the past.
+
+PH/51 Error processing for expansion failure of helo_data from an smtp
+ transport during callout processing was broken.
+
+PH/52 Applied John Jetmore's patch to allow tls-on-connect and STARTTLS to be
+ tested/used via the -bh/-bhc/-bs options.
+
+PH/53 Added missing "#include <time.h>" to pcre/pcretest.c (this was a PCRE
+ bug, fixed in subsequent PCRE releases).
+
+PH/54 Applied Robert Bannocks' patch to avoid a problem with references that
+ arises when using the Solaris LDAP libraries (but not with OpenLDAP).
+
+PH/55 Check for a ridiculously long file name in exim_dbmbuild.
+
+
+Exim version 4.63
+-----------------
+
+SC/01 Use a glob alias rather than an array ref in eximstats generated
+ parser. This improves both readability and performance.
+
+SC/02 Collect SpamAssassin and rejection statistics in eximstats.
+ Don't display local sender or destination tables in eximstats unless
+ there is data to show.
+ Added average volumes into the eximstats top table text output.
+
+SC/03 Collect data on the number of addresses (recipients) as well
+ as the number of messages in eximstats.
+
+TF/01 Correct an error in the documentation for the redirect router. Exim
+ does (usually) call initgroups() when daemonizing.
+
+TF/02 Call initgroups() when dropping privilege in exim.c, so that Exim runs
+ with consistent privilege compared to when running as a daemon.
+
+TF/03 Note in the spec that $authenticated_id is not set for local
+ submissions from trusted users.
+
+TF/04 The ratelimit per_rcpt option now works correctly in acl_not_smtp.
+ Thanks to Dean Brooks <dean@iglou.com> for the patch.
+
+TF/05 Make it easier to get SMTP authentication and TLS/SSL support working
+ by adding some example configuration directives to the default
+ configuration file. A little bit of work is required to uncomment the
+ directives and define how usernames and passwords are checked, but
+ there is now a framework to start from.
+
+PH/01 Added #define LDAP_DEPRECATED 1 to ldap.c because some of the "old"
+ functions that Exim currently uses aren't defined in ldap.h for OpenLDAP
+ without this. I don't know how relevant this is to other LDAP libraries.
+
+PH/02 Add the verb name to the "unknown ACL verb" error.
+
+PH/03 Magnus Holmgren's patch for filter_prepend_home.
+
+PH/03 Fixed Bugzilla #101: macro definition between ACLs doesn't work.
+
+PH/04 Applied Magnus Holmgren's patch to fix Bugzilla #98: transport's home
+ directory not expanded when it should be if an expanded home directory
+ was set for the address (which is overridden by the transport).
+
+PH/05 Applied Alex Kiernan's patch to fix Bugzilla #99: a problem with
+ libradius.
+
+PH/06 Added acl_not_smtp_start, based on Johannes Berg's patch, and set the
+ bit to forbid control=suppress_local_fixups in the acl_not_smtp ACL,
+ because it is too late at that time, and has no effect.
+
+PH/07 Changed ${quote_pgsql to quote ' as '' instead of \' because of a
+ security issue with \' (bugzilla #107). I could not use the
+ PQescapeStringConn() function, because it needs a PGconn value as one of
+ its arguments.
+
+PH/08 When testing addresses using -bt, indicate those final addresses that
+ are duplicates that would not cause an additional delivery. At least one
+ person was confused, thinking that -bt output corresponded to deliveries.
+ (Suppressing duplicates isn't a good idea as you lose the information
+ about possibly different redirections that led to the duplicates.)
+
+PH/09 Applied patch from Erik to use select() instead of poll() in spam.c on
+ systems where poll() doesn't work, in particular OS X.
+
+PH/10 Added more information to debugging output for retry time not reached.
+
+PH/11 Applied patch from Arkadiusz Miskiewicz to apply a timeout to read
+ operations in malware.c.
+
+PH/12 Applied patch from Magnus Holmgren to include the "h" tag in Domain Keys
+ signatures.
+
+PH/13 If write_rejectlog was set false when logging was sent to syslog with
+ syslog_duplication set false, log lines that would normally be written
+ both the the main log and to the reject log were not written to syslog at
+ all.
+
+PH/14 In the default configuration, change the use of "message" in ACL warn
+ statements to "add_header".
+
+PH/15 Diagnose a filter syntax error for "seen", "unseen", or "noerror" if not
+ not followed by a command (e.g. "seen endif").
+
+PH/16 Recognize SMTP codes at the start of "message" in ACLs and after :fail:
+ and :defer: in a redirect router. Add forbid_smtp_code to suppress the
+ latter.
+
+PH/17 Added extra conditions to the default value of delay_warning_condition
+ so that it is now:
+
+ ${if or { \
+ { !eq{$h_list-id:$h_list-post:$h_list-subscribe:}{} } \
+ { match{$h_precedence:}{(?i)bulk|list|junk} } \
+ { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} } \
+ }{no}{yes}}
+
+ The Auto-Submitted: and various List- headers are standardised, whereas I
+ don't think Precedence: ever was.
+
+PH/18 Refactored debugging code in route_finduser() to show more information,
+ in particular, the error code if getpwnam() issues one.
+
+PH/19 Added PQsetClientEncoding(conn, "SQL_ASCII") to the pgsql code module.
+ This is apparently needed in addition to the PH/07 change above to avoid
+ any possible encoding problems.
+
+PH/20 Perl can change the locale. Exim was resetting it after a ${perl call,
+ but not after initializing Perl.
+
+PH/21 Added a call to PQsetNoticeProcessor() to catch pgsql "notices" and
+ output them only if debugging. By default they are written stderr,
+ apparently, which is not desirable.
+
+PH/22 Added Alain Williams' LDAP patch to support setting REFERRALS=off on
+ queries.
+
+JJ/01 exipick: added --reverse (and -R synonym), --random, --size, --sort and
+ --not options
+
+JJ/02 exipick: rewrote --help documentation to hopefully make more clear.
+
+PH/23 Made -oMaa and -oMt work with -bh and -bs to pretend the connection is
+ authenticated or an ident call has been made. Suppress the default
+ values for $authenticated_id and $authenticated_sender (but permit -oMai
+ and -oMas) when testing with -bh.
+
+PH/24 Re-jigged the order of the tests in the default configuration so that the
+ tests for valid domains and recipients precede the DNS black list and CSA
+ tests, on the grounds that those ones are more expensive.
+
+PH/25 Exim was not testing for a space following SMTP commands such as EHLO
+ that require one. Thus, EHLORHUBARB was interpreted as a valid command.
+ This bug exists in every version of Exim that I still have, right back to
+ 0.12.
+
+PH/26 (n)wildlsearch lookups are documented as being done case-insensitively.
+ However, an attempt to turn on case-sensitivity in a regex key by
+ including (?-i) didn't work because the subject string was already
+ lowercased, and the effects were non-intuitive. It turns out that a
+ one-line patch can be used to allow (?-i) to work as expected.
+
+
+Exim version 4.62
+-----------------
+
+TF/01 Fix the add_header change below (4.61 PH/55) which had a bug that (amongst
+ other effects) broke the use of negated acl sub-conditions.
+
+PH/01 ${readsocket now supports Internet domain sockets (modified John Jetmore
+ patch).
+
+PH/02 When tcp-wrappers is called from Exim, it returns only "deny" or "allow".
+ "Deny" causes Exim to reject the incoming connection with a 554 error.
+ Unfortunately, if there is a major crisis, such as a disk failure,
+ tcp-wrappers gives "deny", whereas what one would like would be some
+ kind of temporary error. A kludge has been added to help with this.
+ Before calling hosts_ctl(), errno is set zero. If the result is "deny", a
+ 554 error is used if errno is still zero or contains ENOENT (which occurs
+ if either of the /etc/hosts.{allow,deny} files is missing). Otherwise, a
+ 451 error is used.
+
+PH/03 Add -lutil to the default FreeBSD LIBS setting.
+
+PH/04 Change PH/19 for 4.61 was too wide. It should not be applied to host
+ errors. Otherwise a message that provokes a temporary error (when other
+ messages do not) can cause a whole host to time out.
+
+PH/05 Batch deliveries by appendfile and pipe transports did not work when the
+ addresses were routed directly to files or pipes from a redirect router.
+ File deliveries just didn't batch; pipe deliveries might have suffered
+ odd errors.
+
+PH/06 A failure to get a lock for a hints database would erroneously always say
+ "Failed to get write lock", even when it was really a read lock.
+
+PH/07 The appendfile transport was creating MBX lock files with a fixed mode
+ of 0600. This has been changed to use the value of the lockfile_mode
+ option (which defaults to 0600).
+
+PH/08 Applied small patch from the Sieve maintainer.
+
+PH/09 If maildir_quota_directory_regex was set to exclude (say) the .Trash
+ folder from quota calculations, a direct delivery into this folder messed
+ up the contents of the maildirsize file. This was because the regex was
+ used only to exclude .Trash (or whatever) when the size of the mailbox
+ was calculated. There was no check that a delivery was happening into an
+ excluded directory. This bug has been fixed by ignoring all quota
+ processing for deliveries into excluded directories.
+
+PH/10 Added the maildirfolder_create_regex option to appendfile.
+
+
+Exim version 4.61
+-----------------
+
+PH/01 The code for finding all the local interface addresses on a FreeBSD
+ system running IPv6 was broken. This may well have applied to all BSD
+ systems, as well as to others that have similar system calls. The broken
+ code found IPv4 interfaces correctly, but gave incorrect values for the
+ IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was
+ that it would not match correctly against @[] and not recognize the IPv6
+ addresses as local.
+
+PH/02 The ipliteral router was not recognizing addresses of the form user@
+ [ipv6:....] because it didn't know about the "ipv6:" prefix.
+
+PH/03 Added disable_ipv6.
+
+PH/04 Changed $reply_address to use the raw form of the headers instead of the
+ decoded form, because it is most often used to construct To: headers
+ lines in autoreplies, and the decoded form may well be syntactically
+ invalid. However, $reply_address has leading white space removed, and all
+ newlines turned into spaces so that the autoreply transport does not
+ grumble.
+
+PH/05 If group was specified without a user on a router, and no group or user
+ was specified on a transport, the group from the router was ignored.
+
+PH/06 Increased the number of ACL variables to 20 of each type, and arranged
+ for visible compile-time settings that can be used to change these
+ numbers, for those that want even more. Backwards compatibility with old
+ spool files has been maintained. However, going back to a previous Exim
+ release will lost any variables that are in spool files.
+
+PH/07 Two small changes when running in the test harness: increase delay when
+ passing a TCP/IP connection to a new process, in case the original
+ process has to generate a bounce, and remove special handling of
+ 127.0.0.2 (sic), which is no longer necessary.
+
+PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to
+ be the same on different OS.
+
+PH/09 Moved a debug statement in filter processing to avoid a race problem when
+ testing.
+
+JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:"
+ whether --show-vars was specified or not
+
+JJ/02 exipick: Added support for new ACL variable spool format introduced
+ in 4.61-PH/06
+
+PH/10 Fixed another bug related to PH/04 above: if an incoming message had a
+ syntactically invalid From: or Reply-to: line, and a filter used this to
+ generate an autoreply, and therefore failed to obtain an address for the
+ autoreply, Exim could try to deliver to a non-existent relative file
+ name, causing unrelated and misleading errors. What now happens is that
+ it logs this as a hard delivery error, but does not attempt to create a
+ bounce message.
+
+PH/11 The exinext utility has a -C option for testing purposes, but although
+ the given file was scanned by exinext itself; it wasn't being passed on
+ when Exim was called.
+
+PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as
+ an end-of-file indication when reading a command response.
+
+PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was
+ compiled. In many other places in Exim, IPv6 addresses are always
+ recognized, so I have changed this. It also means that IPv4 domain
+ literals of the form [IPV4:n.n.n.n] are now always recognized.
+
+PH/14 When a uid/gid is specified for the queryprogram router, it cannot be
+ used if the router is not running as root, for example, when verifying at
+ ACL time, or when using -bh. The debugging output from this situation was
+ non-existent - all you got was a failure to exec. I have made two
+ changes:
+
+ (a) Failures to set uid/gid, the current directory, or a process leader
+ in a subprocess such as that created by queryprogram now generate
+ suitable debugging ouput when -d is set.
+
+ (b) The queryprogram router detects when it is not running as root,
+ outputs suitable debugging information if -d is set, and then runs
+ the subprocess without attempting to change uid/gid.
+
+PH/15 Minor change to Makefile for building test_host (undocumented testing
+ feature).
+
+PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the
+ additional section of a DNS packet that returns MX or SRV records.
+ Instead, it always explicitly searches for A/AAAA records. This avoids
+ major problems that occur when a DNS server includes only records of one
+ type (A or AAAA) in an MX/SRV packet. A byproduct of this change has
+ fixed another bug: if SRV records were looked up and the corresponding
+ address records were *not* found in the additional section, the port
+ values from the SRV records were lost.
+
+PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not
+ using the correct key (the original address) when searching the retry
+ rules in order to find which one to use for generating the retry hint.
+
+PH/18 If quota_warn_message contains a From: header, Exim now refrains from
+ adding the default one. Similarly, if it contains a Reply-To: header, the
+ errors_reply_to option, if set, is not used.
+
+PH/19 When calculating a retry time, Exim used to measure the "time since
+ failure" by looking at the "first failed" field in the retry record. Now
+ it does not use this if it is later than than the arrival time of the
+ message. Instead it uses the arrival time. This makes for better
+ behaviour in cases where some deliveries succeed, thus re-setting the
+ "first failed" field. An example is a quota failure for a huge message
+ when small messages continue to be delivered. Without this change, the
+ "time since failure" will always be short, possible causing more frequent
+ delivery attempts for the huge message than are intended.
+ [Note: This change was subsequently modified - see PH/04 for 4.62.]
+
+PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as
+ $1, $2, $3) because the numerical variables can be reset during some
+ expansion items (e.g. "match"), thereby losing the authentication data.
+
+PH/21 Make -bV show the size of off_t variables so that the test suite can
+ decide whether to run tests for quotas > 2G.
+
+PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold,
+ mailbox_size, and mailbox_filecount in the appendfile transport. If a
+ filecount value is greater than 2G or if a quota value is greater than 2G
+ on a system where the size of off_t is not greater than 4, a panic error
+ is given.
+
+PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can
+ never match. The debug and -bh output now contains an explicit error
+ message indicating a malformed IPv4 address or mask.
+
+PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address
+ 1.2.3.4 without a mask. Now it is not recognized as an IP address, and
+ PH/23 above applies.
+
+PH/25 Do not write to syslog when running in the test harness. The only
+ occasion when this arises is a failure to open the main or panic logs
+ (for which there is an explicit test).
+
+PH/26 Added the /no_tell option to "control=freeze".
+
+PH/27 If a host name lookup failed very early in a connection, for example, if
+ the IP address matched host_lookup and the reverse lookup yielded a name
+ that did not have a forward lookup, an error message of the form "no IP
+ address found for host xxx.xxx.xxx (during SMTP connection from NULL)"
+ could be logged. Now it outputs the IP address instead of "NULL".
+
+PH/28 An enabling patch from MH: add new function child_open_exim2() which
+ allows the sender and the authenticated sender to be set when
+ submitting a message from within Exim. Since child_open_exim() is
+ documented for local_scan(), the new function should be too.
+
+PH/29 In GnuTLS, a forced expansion failure for tls_privatekey was not being
+ ignored. In both GnuTLS and OpenSSL, an expansion of tls_privatekey that
+ results in an empty string is now treated as unset.
+
+PH/30 Fix eximon buffer overflow bug (Bugzilla #73).
+
+PH/31 Added sender_verify_fail logging option.
+
+PH/32 In November 2003, the code in Exim that added an empty Bcc: header when
+ needed by RFC 822 but not by RFC 2822 was commented out. I have now
+ tidied the source and removed it altogether.
+
+PH/33 When a queue run was abandoned because the load average was too high, a
+ log line was always written; now it is written only if the queue_run log
+ selector is set. In addition, the log line for abandonment now contains
+ information about the queue run such as the pid. This is always present
+ in "start" and "stop" lines but was omitted from the "abandon" line.
+
+PH/34 Omit spaces between a header name and the colon in the error message that
+ is given when verify = headers_syntax fails (if there are lots of them,
+ the message gets confusing).
+
+PH/35 Change the default for dns_check_names_pattern to allow slashes within
+ names, as there are now some PTR records that contain slashes. This check
+ is only to protect against broken name servers that fall over on strange
+ characters, so the fact that it applies to all lookups doesn't matter.
+
+PH/36 Now that the new test suite is complete, we can remove some of the
+ special code in Exim that was needed for the old test suite. For example,
+ sorting DNS records because real resolvers return them in an arbitrary
+ order. The new test suite's fake resolver always returns records in the
+ same order.
+
+PH/37 When running in the test harness, use -odi for submitted messages (e.g.
+ bounces) except when queue_only is set, to avoid logging races between
+ the different processes.
+
+PH/38 Panic-die if .include specifies a non-absolute path.
+
+PH/39 A tweak to the "H" retry rule from its user.
+
+JJ/03 exipick: Removed parentheses from 'next' and 'last' calls that specified
+ a label. They prevented compilation on older perls.
+
+JJ/04 exipick: Refactored code to prevent implicit split to @_ which caused
+ a warning to be raised on newish perls.
+
+JJ/05 exipick: Fixed bug where -bpc always showed a count of all messages
+ on queue. Changes to match documented behaviour of showing count of
+ messages matching specified criteria.
+
+PH/40 Changed the default ident timeout from 30s to 5s.
+
+PH/41 Added support for the use of login_cap features, on those BSD systems
+ that have them, for controlling the resources used by pipe deliveries.
+
+PH/42 The content-scanning code uses fopen() to create files in which to put
+ message data. Previously it was not paying any attention to the mode of
+ the files. Exim runs with umask(0) because the rest of the code creates
+ files with open(), and sets the required mode explicitly. Thus, these
+ files were ending up world-writeable. This was not a big issue, because,
+ being within the spool directory, they were not world-accessible. I have
+ created a function called modefopen, which takes an additional mode
+ argument. It sets umask(777), creates the file, chmods it to the required
+ mode, then resets the umask. All the relevant calls to fopen() in the
+ content scanning code have been changed to use this function.
+
+PH/43 If retry_interval_max is set greater than 24 hours, it is quietly reset
+ to 24 hours. This avoids potential overflow problems when processing G
+ and H retry rules. I suspect nobody ever tinkers with this value.
+
+PH/44 Added STRIP_COMMAND=/usr/bin/strip to the FreeBSD Makefile.
+
+PH/45 When the plaintext authenticator is running as a client, the server's
+ challenges are checked to ensure they are valid base64 strings. By
+ default, the authentication attempt is cancelled if an invalid string is
+ received. Setting client_ignore_invalid_base64 true ignores these errors.
+ The decoded challenge strings are now placed in $auth1, $auth2, etc. as
+ they are received. Thus, the responses can be made to depend on the
+ challenges. If an invalid string is ignored, an empty string is placed in
+ the variable.
+
+PH/46 Messages that are created by the autoreply transport now contains a
+ References: header, in accordance with RFCs 2822 and 3834.
+
+PH/47 Added authenticated_sender_force to the smtp transport.
+
+PH/48 The ${prvs expansion was broken on systems where time_t was long long.
+
+PH/49 Installed latest patch from the Sieve maintainer.
+
+PH/50 When an Exim quota was set without a file count quota, and mailbox_size
+ was also set, the appendfile transport was unnecessarily scanning a
+ directory of message files (e.g. for maildir delivery) to find the count
+ of files (along with the size), even though it did not need this
+ information. It now does the scan only if it needs to find either the
+ size of the count of files.
+
+PH/51 Added ${time_eval: to convert Exim time strings into seconds.
+
+PH/52 Two bugs concerned with error handling when the smtp transport is
+ used in LMTP mode:
+
+ (i) Exim was not creating retry information for temporary errors given
+ for individual recipients after the DATA command when the smtp transport
+ was used in LMTP mode. This meant that they could be retried too
+ frequently, and not timed out correctly.
+
+ (ii) Exim was setting the flag that allows error details to be returned
+ for LMTP errors on RCPT commands, but not for LMTP errors for individual
+ recipients that were returned after the DATA command.
+
+PH/53 This is related to PH/52, but is more general: for any failing address,
+ when detailed error information was permitted to be returned to the
+ sender, but the error was temporary, then after the final timeout, only
+ "retry timeout exceeded" was returned. Now it returns the full error as
+ well as "retry timeout exceeded".
+
+PH/54 Added control=allow_auth_unadvertised, as it seems there are clients that
+ do this, and (what is worse) MTAs that accept it.
+
+PH/55 Added the add_header modified to ACLs. The use of "message" with "warn"
+ will now be deprecated.
+
+PH/56 New os.c-cygwin from the Cygwin maintainer.
+
+JJ/06 exipick: added --unsorted option to allow unsorted output in all output
+ formats (previously only available in exim formats via -bpr, -bpru,
+ and -bpra. Now also available in native and exiqgrep formats)
+
+JJ/07 exipick: added --freeze and --thaw options to allow faster interaction
+ with very large, slow to parse queues
+
+JJ/08 exipick: added ! as generic prefix to negate any criteria format
+
+JJ/09 exipick: miscellaneous performance enhancements (~24% improvements)
+
+PH/57 Tidies in SMTP dialogue display in debug output: (i) It was not showing
+ responses to authentication challenges, though it was showing the
+ challenges; (ii) I've removed the CR characters from the debug output for
+ SMTP output lines.
+
+PH/58 Allow for the insertion of a newline as well as a space when a string
+ is turned into more than one encoded-word during RFC 2047 encoding. The
+ Sieve code now uses this.
+
+PH/59 Added the following errors that can be detected in retry rules: mail_4xx,
+ data_4xx, lost_connection, tls_required.
+
+PH/60 When a VRFY deferred or FAILED, the log message rather than the user
+ message was being sent as an SMTP response.
+
+PH/61 Add -l and -k options to exicyclog.
+
+PH/62 When verifying, if an address was redirected to one new address, so that
+ verification continued, and the new address failed or deferred after
+ having set something in $address_data, the value of $address_data was not
+ passed back to the ACL. This was different to the case when no
+ redirection occurred. The value is now passed back in both cases.
+
+PH/63 Changed the macro HAVE_LOGIN_CAP (see PH/41 for this release above) to
+ HAVE_SETCLASSRESOURCES because there are different APIs in use that all
+ use login_cap.h, so on its own it isn't the distinguishing feature. The
+ new name refers directly to the setclassresources() function.
+
+PH/65 Added configuration files for NetBSD3.
+
+PH/66 Updated OS/Makefile-HP-UX for gcc 4.1.0 with HP-UX 11.
+
+PH/67 Fixed minor infelicity in the sorting of addresses to ensure that IPv6
+ is preferred over IPv4.
+
+PH/68 The bounce_return_message and bounce_return_body options were not being
+ honoured for bounces generated during the reception of non-SMTP messages.
+ In particular, this applied to messages rejected by the ACL. This bug has
+ been fixed. However, if bounce_return_message is true and bounce_return_
+ body is false, the headers that are returned for a non-SMTP message
+ include only those that have been read before the error was detected.
+ (In the case of an ACL rejection, they have all been read.)
+
+PH/69 The HTML version of the specification is now built in a directory called
+ spec_html instead of spec.html, because the latter looks like a path with
+ a MIME-type, and this confuses some software.
+
+PH/70 Catch two compiler warnings in sieve.c.
+
+PH/71 Fixed an obscure and subtle bug (thanks Alexander & Matthias). The
+ function verify_get_ident() calls ip_connect() to connect a socket, but
+ if the "connect()" function timed out, ip_connect() used to close the
+ socket. However, verify_get_ident() also closes the socket later, and in
+ between Exim writes to the log, which may get opened at this point. When
+ the socket was closed in ip_connect(), the log could get the same file
+ descriptor number as the socket. This naturally causes chaos. The fix is
+ not to close the socket in ip_connect(); the socket should be closed by
+ the function that creates it. There was only one place in the code where
+ this was missing, in the iplookup router, which I don't think anybody now
+ uses, but I've fixed it anyway.
+
+PH/72 Make dns_again_means_nonexist apply to lookups using gethostbyname() as
+ well as to direct DNS lookups. Otherwise the handling of names in host
+ lists is inconsistent and therefore confusing.
+
+
+Exim version 4.60
+-----------------
+
+PH/01 Two changes to the default runtime configuration:
+
+ (1) Move the checks for relay_from_hosts and authenticated clients from
+ after to before the (commented out) DNS black list checks.
+
+ (2) Add control=submission to the relay_from_hosts and authenticated
+ clients checks, on the grounds that messages accepted by these
+ statements are most likely to be submissions.
+
+PH/02 Several tidies to the handling of ${prvs and ${prvscheck:
+
+ (1) Generate an error if the third argument for the ${prvs expansion is
+ not a single digit.
+
+ (2) Treat a missing third argument of ${prvscheck as if it were an empty
+ string.
+
+ (3) Reset the variables that are obtained from the first argument of
+ ${prvscheck and used in the second argument before leaving the code,
+ because their memory is reclaimed, so using them afterwards may do
+ silly things.
+
+ (4) Tidy up the code for expanding the arguments of ${prvscheck one by
+ one (it's much easier than Tom thought :-).
+
+ (5) Because of (4), we can now allow for the use of $prvscheck_result
+ inside the third argument.
+
+PH/03 For some reason, the default setting of PATH when running a command from
+ a pipe transport was just "/usr/bin". I have changed it to
+ "/bin:/usr/bin".
+
+PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause
+ anything to be listed in the output from -bV.
+
+PH/05 When a filter generated an autoreply, the entire To: header line was
+ quoted in the delivery log line, like this:
+
+ => >A.N.Other <ano@some.domain> <original@ddress> ...
+
+ This has been changed so that it extracts the operative address. There
+ may be more than one such address. If so, they are comma-separated, like
+ this:
+
+ => >ano@some.domain,ona@other.domain <original@ddress> ...
+
+PH/06 When a client host used a correct literal IP address in a HELO or EHLO
+ command, (for example, EHLO [1.2.3.4]) and the client's IP address was
+ not being looked up in the rDNS to get a host name, Exim was showing the
+ IP address twice in Received: lines, even though the IP addresses were
+ identical. For example:
+
+ Received: from [1.2.3.4] (helo=[1.2.3.4])
+
+ However, if the real host name was known, it was omitting the HELO data
+ if it matched the actual IP address. This has been tidied up so that it
+ doesn't show the same IP address twice.
+
+PH/07 When both +timestamp and +memory debugging was on, the value given by
+ $tod_xxx expansions could be wrong, because the tod_stamp() function was
+ called by the debug printing, thereby overwriting the timestamp buffer.
+ Debugging no longer uses the tod_stamp() function when +timestamp is set.
+
+PH/08 When the original message was included in an autoreply transport, it
+ always said "this is a copy of the message, including all the headers",
+ even if body_only or headers_only was set. It now gives an appropriate
+ message.
+
+PH/09 Applied a patch from the Sieve maintainer which:
+
+ o fixes some comments
+ o adds the (disabled) notify extension core
+ o adds some debug output for the result of if/elsif tests
+ o points to the current vacation draft in the documentation
+ and documents the missing references header update
+
+ and most important:
+
+ o fixes a bug in processing the envelope test (when testing
+ multiple envelope elements, the last element determinted the
+ result)
+
+PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to
+ Electronic Mail") by including:
+
+ Auto-submitted: auto-generated
+
+ in the messages that it generates (bounce messages and others, such as
+ warnings). In the case of bounce messages for non-SMTP mesages, there was
+ also a typo: it was using "Auto_submitted" (underscore instead of
+ hyphen). Since every message generated by Exim is necessarily in response
+ to another message, thes have all been changed to:
+
+ Auto-Submitted: auto-replied
+
+ in accordance with these statements in the RFC:
+
+ The auto-replied keyword:
+
+ - SHOULD be used on messages sent in direct response to another
+ message by an automatic process,
+
+ - MUST NOT be used on manually-generated messages,
+
+ - MAY be used on Delivery Status Notifications (DSNs) and Message
+ Disposition Notifications (MDNs),
+
+ - MUST NOT be used on messages generated by automatic or periodic
+ processes, except for messages which are automatic responses to
+ other messages.
+
+PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}"
+ to the default Received: header definition.
+
+PH/12 Added log selector acl_warn_skipped (default on).
+
+PH/13 After a successful wildlsearch lookup, discard the values of numeric
+ variables because (a) they are in the wrong storage pool and (b) even if
+ they were copied, it wouldn't work properly because of the caching.
+
+PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length
+ checking when decoding. Apparently there are clients that generate
+ overlong encoded strings. Why am I not surprised?
+
+PH/15 If the first argument of "${if match_address" was not empty, but did not
+ contain an "@" character, Exim crashed. Now it writes a panic log message
+ and treats the condition as false.
+
+PH/16 In autoreply, treat an empty string for "once" the same as unset.
+
+PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve
+ extension "envelope-auth". The code is finished and in agreement with
+ other implementations, but there is no documentation so far and in fact,
+ nobody wrote the draft yet. This extension is currently #undef'ed, thus
+ not changing the active code.
+
+ Print executed "if" and "elsif" statements when debugging is used. This
+ helps a great deal to understand what a filter does.
+
+ Document more things not specified clearly in RFC3028. I had all this
+ sorted out, when out of a sudden new issues came to my mind. Oops."
+
+PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists
+ (Bugzilla #53).
+
+PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated
+ canonical form (as documented). However, after a host name lookup from
+ the IP address, check_host() was doing a simple string comparison with
+ addresses acquired from the DNS when checking that the found name did
+ have the original IP as one of its addresses. Since any found IPv6
+ addresses are likely to be in abbreviated form, the comparison could
+ fail. Luckily, there already exists a function for doing the comparison
+ by converting both addresses to binary, so now that is used instead of
+ the text comparison.
+
+PH/20 There was another similar case to PH/19, when a complete host name was
+ given in a host list; looking up its IP address could give an abbreviated
+ form, whereas the current host's name might or might not be abbreviated.
+ The same fix has been applied.
+
+
+Exim version 4.54
+-----------------
+
+PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was
+ set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not.
+ It now does.
+
+PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on
+ the CVS lines, and there was a missing #if HAVE_IPV6 in host.c.
+
+PH/03 Typo: missing ".o" in src/pcre/Makefile.
+
+PH/04 Tighten up "personal" tests: Instead of testing for any "List-"
+ header line, restrict the check to what is listed in RFCs 2369 and 2929.
+ Also, for "Auto-Submitted", treat anything other than "no" as
+ non-personal, in accordance with RFC 3834. (Previously it treated
+ anything starting "auto-" as non-personal.)
+
+TF/01 The control=submission/name=... option had a problem with syntax
+ errors if the name included a slash character. The /name= option
+ now slurps the rest of the string, so it can include any characters
+ but it must come last in the list of options (after /sender_retain
+ or /domain=).
+
+PH/05 Some modifications to the interface to the fake nameserver for the new
+ testing suite.
+
+
+
+Exim version 4.53
+-----------------
+
+TK/01 Added the "success_on_redirect" address verification option. See
+ NewStuff for rationale and an example.
+
+PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
+
+PH/02 Patch to exigrep to allow it to work on syslog lines.
+
+PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
+ fread() to skip over the body file's header line, because in Cygwin the
+ header line is locked and is inaccessible.
+
+PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
+ co-exist for some time) to make it clear that it is the Exim ID that is
+ referenced, not the Message-ID: header line.
+
+PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
+ string_format() function, because snprintf() does not exist on all
+ operating systems.
+
+PH/06 The use of forbid_filter_existstest now also locks out the use of the
+ ${stat: expansion item.
+
+PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
+ protocol synchronization error", to keep the pedants happy.
+
+PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
+ well as for IRIX systems, when gcc is being used. See the host.c source
+ file for comments.
+
+PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
+
+PH/10 Named domain lists were not working if used in a queue_smtp_domains
+ setting.
+
+PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
+ transport and to the smtp transport in LMTP mode.
+
+TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
+
+PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
+ run a filter in a subprocess. This could lead to confusion in subsequent
+ lookups in the parent process. There should also be a search_tidyup() at
+ the end of the subprocess.
+
+PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
+ only if the host matched helo_try_verify_hosts, which caused the
+ verification to occur when the EHLO/HELO command was issued. The ACL just
+ tested the remembered result. Now, if a previous verification attempt has
+ not happened, "verify = helo" does it there and then.
+
+JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
+
+TK/03 Fix log output including CR from clamd.
+
+PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
+ exist provoked a memory error which could cause a segfault.
+
+PH/15 Installed PCRE 6.2
+
+PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
+
+PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
+ of the problem. Specifically, suggested +O2 rather than +O1 for the
+ HP-UX compiler.
+
+PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
+
+PH/20 If a delivery was routed to a non-standard port by means of an SRV
+ record, the port was not correctly logged when the outgoing_port log
+ selector was set (it logged the transort's default port).
+
+PH/21 Added support for host-specific ports to manualroute, queryprogram,
+ fallback_hosts, and "hosts" in the smtp transport.
+
+PH/22 If the log selector "outgoing_port" is set, the port is now also given on
+ host errors such as "Connection refused".
+
+PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
+ authentication with radiusclient 0.4.9:
+
+ - Error returned from rc_read_config was caught wrongly
+ - Username/password not passed on to radius server due to wrong length.
+
+ The presumption is that some radiusclient API changes for 4.51/PH/17
+ were not taken care of correctly. The code is still untested by me (my
+ Linux distribution still has 0.3.2 of radiusclient), but it was
+ contributed by a Radius user.
+
+PH/24 When doing a callout, the value of $domain wasn't set correctly when
+ expanding the "port" option of the smtp transport.
+
+TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
+ while reading a MIME header. Thanks to Tom Hughes for a patch.
+
+PH/24 Include config.h inside local_scan.h so that configuration settings are
+ available.
+
+PH/25 Make $smtp_command_argument available after all SMTP commands. This means
+ that in an ACL for RCPT (for example), you can examine exactly what was
+ received.
+
+PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
+ commands, but it was not correctly comparing the address with the actual
+ client host address. Thus, it would show the EHLO address in Received:
+ header lines when this was not necessary.
+
+PH/27 Added the % operator to ${eval:}.
+
+PH/28 Exim tries to create and chdir to its spool directory when it starts;
+ it should be ignoring failures (because with -C, for example, it has lost
+ privilege). It wasn't ignoring creation failures other than "already
+ exists".
+
+PH/29 Added "crypteq" to the list of supported features that Exim outputs when
+ -bV or -d is used.
+
+PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed
+ because an input line was too long, either on its own, or by virtue of
+ too many continuations, the temporary file was not being removed, and the
+ return code was incorrect.
+
+PH/31 Missing "BOOL" in function definition in filtertest.c.
+
+PH/32 Applied Sieve patches from the maintainer.
+
+TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67.
+
+PH/33 Added "verify = not_blind".
+
+PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in
+ Local/Makefile (with some defaults set). These are used in built scripts
+ such as exicyclog, but they have never been used in the exim_install
+ script (though there are many overriding facilities there). I have
+ arranged that the exim_install script now takes note of these two
+ settings.
+
+PH/35 Installed configuration files for Dragonfly.
+
+PH/36 When a locally submitted message by a trusted user did not contain a
+ From: header, and the sender address was obtained from -f or from an SMTP
+ MAIL command, and the trusted user did not use -F to supply a sender
+ name, $originator_name was incorrectly used when constructing a From:
+ header. Furthermore, $originator_name was used for submission mode
+ messages from external hosts without From: headers in a similar way,
+ which is clearly wrong.
+
+PH/37 Added control=suppress_local_fixups.
+
+PH/38 When log_selector = +received_sender was set, and the addition of the
+ sender made the log line's construction buffer exactly full, or one byte
+ less than full, an overflow happened when the terminating "\n" was
+ subsequently added.
+
+PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry
+ when the result of a list match is failure because a DNS lookup failed.
+
+PH/40 RM_COMMAND is now used in the building process.
+
+PH/41 Added a "distclean" target to the top-level Makefile; it deletes all
+ the "build-* directories that it finds.
+
+PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP
+ address in a domain literal was a prefix of an interface address.
+
+PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains
+ when verifying a sender address, unless rewrite_headers is false.
+
+PH/44 Wrote a long comment about why errors_to addresses are verified as
+ recipients, not senders.
+
+TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when
+ the ratelimit ACL was added.
+
+PH/45 Added $smtp_command for the full command (cf $smtp_command_argument).
+
+PH/46 Added extra information about PostgreSQL errors to the error string.
+
+PH/47 Added an interface to a fake DNS resolver for use by the new test suite,
+ avoiding the need to install special zones in a real server. This is
+ backwards compatible; if it can't find the fake resolver, it drops back.
+ Thus, both old and new test suites can be run.
+
+TF/02 Added util/ratelimit.pl
+
+TF/03 Minor fix to the ratelimit code to improve its behaviour in case the
+ clock is set back in time.
+
+TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian
+ Candler <B.Candler@pobox.com>.
+
+TF/05 The fix for PH/43 was not completely correct; widen_domains is always
+ OK for addresses that are the result of redirections.
+
+PH/48 A number of further additions for the benefit of the new test suite,
+ including a fake gethostbyname() that interfaces to the fake DNS resolver
+ (see PH/47 above).
+
+TF/06 The fix for widen_domains has also been applied to qualify_single and
+ search_parents which are the other dnslookup options that can cause
+ header rewrites.
+
+PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter
+ type ("H").
+
+PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable.
+
+TF/07 Exim produced the error message "an SRV record indicated no SMTP
+ service" if it encountered an MX record with an empty target hostname.
+ The message is now "an MX or SRV record indicated no SMTP service".
+
+TF/08 Change PH/13 introduced the possibility that verify=helo may defer,
+ if the DNS of the sending site is misconfigured. This is quite a
+ common situation. This change restores the behaviour of treating a
+ helo verification defer as a failure.
+
+PH/51 If self=fail was set on a router, the bounce message did not include the
+ actual error message.
+
+
+Exim version 4.52
+-----------------
+
+TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
+
+PH/01 When a transport filter timed out in a pipe delivery, and the pipe
+ command itself ended in error, the underlying message about the transport
+ filter timeout was being overwritten with the pipe command error. Now the
+ underlying error message should be appended to the second error message.
+
+TK/01 Fix poll() being unavailable on Mac OSX 10.2.
+
+PH/02 Reduce the amount of output that "make" produces by default. Full output
+ can still be requested.
+
+PH/03 The warning log line about a condition test deferring for a "warn" verb
+ was being output only once per connection, rather than after each
+ occurrence (because it was using the same function as for successful
+ "warn" verbs). This seems wrong, so I have changed it.
+
+TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
+ it should not have, which might have caused a crash in the right
+ circumstances, but probably never did.
+
+PH/04 Installed a modified version of Tony Finch's patch to make submission
+ mode fix the return path as well as the Sender: header line, and to
+ add a /name= option so that you can make the user's friendly name appear
+ in the header line.
+
+TF/03 Added the control = fakedefer ACL modifier.
+
+TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
+ Mark Lowes for thorough testing.
+
+TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
+
+TK/03 Merged latest SRS patch from Miles Wilton.
+
+PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
+ with the definition in sysexits.h (which is #included earlier).
+ Fortunately, Exim does not actually use EX_OK. The code used to try to
+ preserve the sysexits.h value, by assumimg that macro definitions were
+ scanned for macro replacements. I have been disabused of this notion,
+ so now the code just undefines EX_OK before #including unistd.h.
+
+PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
+ in the smtp transport. When a block could not be written in a single
+ write() function, the timeout was being re-applied to each part-write.
+ This seems wrong - if the receiver was accepting one byte at a time it
+ would take for ever. The timeout is now adjusted when this happens. It
+ doesn't have to be particularly precise.
+
+TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
+ details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
+
+PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
+ without a domain if the check to <postmaster@domain> fails.
+
+SC/01 Eximstats: added -xls and the ability to specify output files
+ (patch written by Frank Heydlauf).
+
+SC/02 Eximstats: use FileHandles for outputing results.
+
+SC/03 Eximstats: allow any combination of xls, txt, and html output.
+
+SC/04 Eximstats: fixed display of large numbers with -nvr option
+
+SC/05 Eximstats: fixed merging of reports with empty tables.
+
+SC/06 Eximstats: added the -include_original_destination flag
+
+SC/07 Eximstats: removed tabs and trailing whitespace.
+
+TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
+
+TK/06 MBOX spool code: Add real "From " MBOX separator line
+ so the .eml file is really in mbox format (even though
+ most programs do not really care). Patch from Alex Miller.
+
+TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
+ The latter is generated from $received_to and is only set if the
+ message has one envelope recipient. SA can use these headers,
+ obviously out-of-the-box. Patch from Alex Miller.
+
+PH/08 The ${def test on a variable was returning false if the variable's
+ value was "0", contrary to what the specification has always said!
+ The result should be true unless the variable is empty.
+
+PH/09 The syntax error of a character other than { following "${if
+ def:variable_name" (after optional whitespace) was not being diagnosed.
+ An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
+ accidental colon was present, for example, could give incorrect results.
+
+PH/10 Tidied the code in a number of places where the st_size field of a stat()
+ result is used (not including appendfile, where other changes are about
+ to be made).
+
+PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
+ This involved changing a lot of size variables from int to off_t. It
+ should work with maildirs and everything.
+
+TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
+ spamd dying while we are connected to it.
+
+TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
+ <jgh@wizmail.org>
+
+PH/12 Applied Alex Kiernan's patch for the API change for the error callback
+ function for BDB 4.3.
+
+PH/13 Changed auto_thaw such that it does not apply to bounce messages.
+
+PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
+ the sources for PCRE have been re-arranged and more files are now
+ involved.
+
+PH/15 The code I had for printing potentially long long variables in PH/11
+ above was not the best (it lost precision). The length of off_t variables
+ is now inspected at build time, and an appropriate printing format (%ld
+ or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T
+ to be "long long int" or "long int". This is needed for the internal
+ formatting function string_vformat().
+
+PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
+ the configuration file to be ":syslog", then the script "guesses" where
+ the logs files are, rather than using the compiled in default. In our
+ case the guess is not the same as the compiled default, so the script
+ suddenly stopped working when I started to use syslog. The patch checks
+ to see if log_file_path is "". If so, it attempts to read it from exim
+ with no configuration file to get the compiled in version, before it
+ falls back to the previous guessing code."
+
+TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
+ implementing BATV in an Exim configuration. See NewStuff for the gory
+ details.
+
+PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
+ Makefile that are specific to HP-UX.
+
+PH/18 If the "use_postmaster" option was set for a recipient callout together
+ with the "random" option, the postmaster address was used as the MAIL
+ FROM address for the random test, but not for the subsequent recipient
+ test. It is now used for both.
+
+PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
+ patch removes a few documentation additions to RFC 3028, because the
+ latest draft now contains them. It adds the new en;ascii-case comparator
+ and a new error check for 8bit text in MIME parts. Comparator and
+ require names are now matched exactly. I enabled the subaddress
+ extension, but it is not well tested yet (read: it works for me)."
+
+PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
+ rework some of the code of TK/09 above to avoid the hardwired use of
+ "%lld" and "long long". Replaced the call to snprintf() with a call to
+ string_vformat().
+
+PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX
+ records point to non-existent hosts", "retry timeout exceeded", and
+ "retry time not reached for any host after a long failure period".
+
+PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
+ experimental DomainKeys support:
+
+ (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
+ (2) On an error such as an illegally used "control", the wrong name for
+ the control was given.
+
+ These problems did NOT occur unless DomainKeys support was compiled.
+
+PH/23 Added daemon_startup_retries and daemon_startup_sleep.
+
+PH/24 Added ${if match_ip condition.
+
+PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
+ databases so that it will be absolutely obvious if a crash occurs in the
+ DB library. This is a regular occurrence (often caused by mis-matched
+ db.h files).
+
+PH/26 Insert a lot of missing (void) casts for functions such as chown(),
+ chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
+ picked up on a user's system that detects such things. There doesn't seem
+ to be a gcc warning option for this - only an attribute that has to be
+ put on the function's prototype. It seems that in Fedora Core 4 they have
+ set this on a number of new functions. No doubt there will be more in due
+ course.
+
+PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
+ specify a transport. However, if an address that was verified by such a
+ router was the subject of a callout, Exim crashed because it tried to
+ read the rcpt_include_affixes from the non-existent transport. Now it
+ just assumes that the setting of that option is false. This bug was
+ introduced by 4.51/PH/31.
+
+PH/28 Changed -d+all to exclude +memory, because that information is very
+ rarely of interest, but it makes the output a lot bigger. People tend to
+ do -d+all out of habit.
+
+PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
+ code in os-type was giving problems when libc.so lives in lib64, like on
+ x86_64 Fedora Core.
+
+PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
+ aren't the modern standard, and it seems that some systems' include files
+ don't always have them. Exim was already checking for some of the newer
+ ones like T_AAAA, and defining it itself. I've added checks for all the
+ record types that Exim uses.
+
+PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was
+ not automatically generating a new one, as it is supposed to. This
+ prevented TLS from working. If the file did exist, but contained invalid
+ data, a new version was generated, as expected. It was only the case of a
+ non-existent file that was broken.
+
+TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
+ with a change in libdomainkeys > 0.64.
+
+TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
+ from DNS. If the selector record carries the flag, it now has
+ precedence over the domain-wide flag.
+
+TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
+
+PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as
+ the use of a port name that isn't defined in /etc/services) occurred, the
+ message was deferred as in a normal delivery, and thus remained on the
+ spool, instead of being failed because of the mua_wrapper setting. This
+ is now fixed, and I tidied up some of the mua_wrapper messages at the
+ same time.
+
+SC/08 Eximstats: whilst parsing the mainlog(s), store information about
+ the messages in a hash of arrays rather than using individual hashes.
+ This is a bit cleaner and results in dramatic memory savings, albeit
+ at a slight CPU cost.
+
+SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
+ as requested by Marc Sherman.
+
+SC/10 Eximstats: added histograms for user specified patterns as requested
+ by Marc Sherman.
+
+SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified.
+
+PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of
+ fopen() in the content-scanning modules that did not already have it.
+
+
+Exim version 4.51
+-----------------
+
+TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
+ doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
+
+TK/02 Fix ACL "control" statement not being available in MIME ACL.
+
+TK/03 Fix ACL "regex" condition not being available in MIME ACL.
+
+PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
+ to test Sieve filters that use "vacation".
+
+PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
+ that changes the way the GnuTLS parameters are stored in the cache file.
+ The new format can be generated externally. For backward compatibility,
+ if the data in the cache doesn't make sense, Exim assumes it has read an
+ old-format file, and it generates new data and writes a new file. This
+ means that you can't go back to an older release without removing the
+ file.
+
+PH/03 A redirect router that has both "unseen" and "one_time" set does not
+ work if there are any delivery delays because "one_time" forces the
+ parent to be marked "delivered", so its unseen clone is never tried
+ again. For this reason, Exim now forbids the simultaneous setting of
+ these two options.
+
+PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
+ redirected to themselves ("homonym" addresses). Read the long ChangeLog
+ entry if you want to know the details. The fix, however, neglected to
+ consider the case when local delivery batching is involved. The test for
+ "previously delivered" was not happening when checking to see if an
+ address could be batched with a previous (undelivered) one; under
+ certain circumstances this could lead to multiple deliveries to the same
+ address.
+
+PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
+ in its include files, and this causes problems building Exim.
+
+PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
+ header_syntax) but Exim was just ignoring anything given after a slash.
+ In particular, this caused confusion with an attempt to use "verify =
+ reverse_host_lookup/defer_ok". An error is now given when options are
+ supplied for verify items that do not have them. (Maybe reverse_host_
+ lookup should have a defer_ok option, but that's a different point.)
+
+PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
+ defined by RFC 821) to 2048, because there were problems with some AUTH
+ commands, and RFC 1869 says the size should be increased for extended
+ SMTP commands that take arguments.
+
+PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
+ Finch).
+
+PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
+ "unknown" error; now it says that the functionality isn't in the binary.
+
+PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
+ an address' error message when a string expansion fails (syntax or
+ whatever). Otherwise the password may appear in the log. Following change
+ PH/42 below, there is no longer a chance of it appearing in a bounce
+ message.
+
+PH/11 Installed exipick version 20050225.0 from John Jetmore.
+
+PH/12 If the last host in a fallback_hosts list was multihomed, only the first
+ of its addresses was ever tried. (Bugzilla bug #2.)
+
+PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
+ the result incorrectly in the debug output. (It correctly added a newline
+ to what was transported.)
+
+TF/01 Added $received_time.
+
+PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
+ commented out examples of how to interface to a virus scanner and to
+ SpamAssassin. Also added commented examples of av_scanner and
+ spamd_address settings.
+
+PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
+ and controls are allowed in which ACLs. There were a couple of minor
+ errors. Some of the entries in the conditions table (which is a table of
+ where they are NOT allowed) were getting very unwieldy; rewrote them as a
+ negation of where the condition IS allowed.
+
+PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
+
+PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
+ header file does not have a version number, so I've had to invent a new
+ value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
+ API. The code is untested by me (my Linux distribution still has 0.3.2 of
+ radiusclient), but it was contributed by a Radius user.
+
+PH/18 Installed Lars Mainka's patch for the support of CRL collections in
+ files or directories, for OpenSSL.
+
+PH/19 When an Exim process that is running as root has to create an Exim log
+ file, it does so in a subprocess that runs as exim:exim so as to get the
+ ownership right at creation (otherwise, other Exim processes might see
+ the file with the wrong ownership). There was no test for failure of this
+ fork() call, which would lead to the process getting stuck as it waited
+ for a non-existent subprocess. Forks do occasionally fail when resources
+ run out. I reviewed all the other calls to fork(); they all seem to check
+ for failure.
+
+PH/20 When checking for unexpected SMTP input at connect time (before writing
+ the banner), Exim was not dealing correctly with a non-positive return
+ from the read() function. If the client had disconnected by this time,
+ the result was a log entry for a synchronization error with an empty
+ string after "input=" when read() returned zero. If read() returned -1
+ (an event I could not check), uninitialized data bytes were printed.
+ There were reports of junk text (parts of files, etc) appearing after
+ "input=".
+
+PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
+
+PH/22 Added support for macro redefinition, and (re)definition in between
+ driver and ACL definitions.
+
+PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
+ forgetting to use the resulting value; it was using the unexpanded value.
+
+PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
+ hadn't been configured. The fix is from Juergen Kreileder, who
+ understands it better than I do:
+
+ "Here's what I see happening with three configured cyrus_sasl
+ authenticators configured (plain, login, cram-md5):
+
+ On startup auth_cyrus_sasl_init() gets called for each of these.
+ This means three calls to sasl_listmech() without a specified mech_list.
+ => SASL tests which mechs of all available mechs actually work
+ => three warnings about OTP not working
+ => the returned list contains: plain, login, cram-md5, digest-md5, ...
+
+ With the patch, sasl_listmech() also gets called three times. But now
+ SASL's mech_list option is set to the server_mech specified in the the
+ authenticator. Or in other words, the answer from sasl_listmech()
+ gets limited to just the mech you're testing for (which is different
+ for each call.)
+ => the return list contains just 'plain' or 'login', 'cram-md5' or
+ nothing depending on the value of ob->server_mech.
+
+ I've just tested the patch: Authentication still works fine,
+ unavailable mechs specified in the exim configuration are still
+ caught, and the auth.log warnings about OTP are gone."
+
+PH/25 When debugging is enabled, the contents of the command line are added
+ to the debugging output, even when log_selector=+arguments is not
+ specified.
+
+PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
+ answer is "GNU", and only if the return is "GNU/something" is the answer
+ "Linux".
+
+PH/27 $acl_verify_message is now set immediately after the failure of a
+ verification in an ACL, and so is available in subsequent modifiers. In
+ particular, the message can be preserved by coding like this:
+
+ warn !verify = sender
+ set acl_m0 = $acl_verify_message
+
+ Previously, $acl_verify_message was set only while expanding "message"
+ and "log_message" when a very denied access.
+
+PH/28 Modified OS/os.c-Linux with
+
+ -#ifndef OS_LOAD_AVERAGE
+ +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
+
+ to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
+ nomenclature these days.)
+
+PH/29 Installed patch from the Sieve maintainer that adds the options
+ sieve_useraddress and sieve_subaddress to the redirect router.
+
+PH/30 In these circumstances:
+ . Two addresses routed to the same list of hosts;
+ . First host does not offer TLS;
+ . First host accepts first address;
+ . First host gives temporary error to second address;
+ . Second host offers TLS and a TLS session is established;
+ . Second host accepts second address.
+ Exim incorrectly logged both deliveries with the TLS parameters (cipher
+ and peerdn, if requested) that were in fact used only for the second
+ address.
+
+PH/31 When doing a callout as part of verifying an address, Exim was not paying
+ attention to any local part prefix or suffix that was matched by the
+ router that accepted the address. It now behaves in the same way as it
+ does for delivery: the affixes are removed from the local part unless
+ rcpt_include_affixes is set on the transport.
+
+PH/32 Add the sender address, as F=<...>, to the log line when logging a
+ timeout during the DATA phase of an incoming message.
+
+PH/33 Sieve envelope tests were broken for match types other than :is. I have
+ applied a patch sanctioned by the Sieve maintainer.
+
+PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
+ the uid or gid is negative. A case of a negative gid caused this to be
+ noticed. The fix allows for either to be negative.
+
+PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
+ clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
+ overlooked.
+
+PH/36 The change PH/12 above was broken. Fixed it.
+
+PH/37 Exim used to check for duplicate addresses in the middle of routing, on
+ the grounds that routing the same address twice would always produce the
+ same answer. This might have been true once, but it is certainly no
+ longer true now. Routing a child address may depend on the previous
+ routing that produced that child. Some complicated redirection strategies
+ went wrong when messages had multiple recipients, and made Exim's
+ behaviour dependent on the order in which the addresses were given.
+
+ I have moved the duplicate checking until after the routing is complete.
+ Exim scans the addresses that are assigned to local and remote
+ transports, and removes any duplicates. This means that more work will be
+ done, as duplicates will always all be routed, but duplicates are
+ presumably rare, so I don't expect this is of any significance.
+
+ For deliveries to pipes, files, and autoreplies, the duplicate checking
+ still happens during the routing process, since they are not going to be
+ routed further.
+
+PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
+ It corrects a timeout issue with spamd. This is Ian's comment: "The
+ background is that sometimes spamd either never reads data from a
+ connection it has accepted, or it never writes response data. The exiscan
+ spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
+ blindly assumes that writes won't block so it may never time out."
+
+PH/39 Allow G after quota size as well as K and M.
+
+PH/40 The value set for $authenticated_id in an authenticator may not contain
+ binary zeroes or newlines because the value is written to log lines and
+ to spool files. There was no check on this. Now the value is run through
+ the string_printing() function so that such characters are converted to
+ printable escape sequences.
+
+PH/41 $message_linecount is a new variable that contains the total number of
+ lines in the message. Compare $body_linecount, which is the count for the
+ body only.
+
+PH/42 Exim no longer gives details of delivery errors for specific addresses in
+ bounce and delay warning messages, except in certain special cases, which
+ are as follows:
+
+ (a) An SMTP error message from a remote host;
+ (b) A message specified in a :fail: redirection;
+ (c) A message specified in a "fail" command in a system filter;
+ (d) A message specified in a FAIL return from the queryprogram router;
+ (e) A message specified by the cannot_route_message router option.
+
+ In these cases only, Exim does include the error details in bounce and
+ warning messages. There are also a few cases where bland messages such
+ as "unrouteable address" or "local delivery error" are given.
+
+PH/43 $value is now also set for the "else" part of a ${run expansion.
+
+PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
+ being worked on, but at least Exim now implements the latest version to
+ play with."
+
+PH/45 In a pipe transport, although a timeout while waiting for the pipe
+ process to complete was treated as a delivery failure, a timeout while
+ writing the message to the pipe was logged, but erroneously treated as a
+ successful delivery. Such timeouts include transport filter timeouts. For
+ consistency with the overall process timeout, these timeouts are now
+ treated as errors, giving rise to delivery failures by default. However,
+ there is now a new Boolean option for the pipe transport called
+ timeout_defer, which, if set TRUE, converts the failures into defers for
+ both kinds of timeout. A transport filter timeout is now identified in
+ the log output.
+
+PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
+ systems where "make" and "gmake" are different, calling "gmake" at top
+ level broke things. I've arranged for the value of $(MAKE) to be passed
+ from the Makefile to this script so that it can call the same version of
+ "make".
+
+
+A note about Exim versions 4.44 and 4.50
+----------------------------------------
+
+Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
+changes of various kinds. As a consequence, a big documentation update was
+needed. This delayed the release for rather longer than seemed good, especially
+in the light of a couple of (minor) security issues. Therefore, the changes
+that fixed bugs were backported into 4.43, to create a 4.44 maintenance
+release. So 4.44 and 4.50 are in effect two different branches that both start
+from 4.43.
+
+I have left the 4.50 change log unchanged; it contains all the changes since
+4.43. The change log for 4.44 is below; many of its items are identical to
+those for 4.50. This seems to be the most sensible way to preserve the
+historical information.
-Change log file for Exim from version 4.21
--------------------------------------------
Exim version 4.50
-----------------
keys for these records are domain names, not reversed IP addresses. The
dnsdb PTR lookup now tests whether its key is an IP address. If not, it
leaves it alone. Component reversal etc. now happens only for IP addresses.
+ CAN-2005-0021
56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
exim, but did not say which command line option was involved. All I could
find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
running as the user.
+ CAN-2005-0021
61. There was a buffer overflow vulnerability in the SPA authentication code
(which came originally from the Samba project). I have added a test to the
spa_base64_to_bits() function which I hope fixes it.
+ CAN-2005-0022
62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
put in $acl_verify_message. In this situation, it now puts the system
message there.
+71. Change 4.23/11 added synchronization checking at the start of an SMTP
+ session; change 4.31/43 added the unwanted input to the log line - except
+ that it did not do this in the start of session case. It now does.
+
+72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
+ This is wrong and can cause the other end to generate a synchronization
+ error if it is another Exim or anything else that does the synchronization
+ check. A QUIT command is no longer sent after a timeout.
+
+73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
+ during host lookups.
+
+74. The defer_ok option of callout verification was not working if it was used
+ when verifying addresses in header lines, that is, for this case:
+
+ verify = header_sender/callout=defer_ok
+
+75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
+ those file descriptors could be used for SMTP connections. If anything
+ wrote to stderr (the example that came up was "warn" in embedded Perl), it
+ could be sent to the SMTP client, causing chaos. The daemon now opens
+ stdin, stdout, and stderr to /dev/null when it puts itself into the
+ background.
+
+76. Arrange for output from Perl's "warn" command to be written to Exim's main
+ log by default. The user can override this with suitable Perl magic.
+
+77. The use of log_message on a "discard" ACL verb, which is supposed to add to
+ the log message when discard triggers, was not working for the DATA ACL or
+ for the non-SMTP ACL.
+
+78. Error message wording change in sieve.c.
+
+79. If smtp_accept_max_per_host was set, the number of connections could be
+ restricted to fewer than expected, because the daemon was trying to set up
+ a new connection before checking whether the processes handling previous
+ connections had finished. The check for completed processes is now done
+ earlier. On busy systems, this bug wouldn't be noticed because something
+ else would have woken the daemon, and it would have reaped the completed
+ process earlier.
+
+80. If a message was submitted locally by a user whose login name contained one
+ or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
+ It caused a spool format error. I have fixed the spool reading code. A
+ related problem was that the "from" clause in the Received: line became
+ illegal because of the space(s). It is now covered by ${quote_local_part.
+
+81. Included the latest eximstats from Steve (adds average sizes to HTML Top
+ tables).
+
+82. Updated OS/Makefile-AIX as per message from Mike Meredith.
+
+83. Patch from Sieve maintainer to fix unterminated string problem in
+ "vacation" handling.
+
+84. Some minor changes to the Linux configuration files to help with other
+ OS variants using glibc.
+
+85. One more patch for Sieve to update vacation handling to latest spec.
+
+
+----------------------------------------------------
+See the note above about the 4.44 and 4.50 releases.
+----------------------------------------------------
+
+
+Exim version 4.44
+-----------------
+
+ 1. Change 4.43/35 introduced a bug that caused file counts to be
+ incorrectly computed when quota_filecount was set in an appendfile
+ transport
+
+ 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
+ bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
+ place.
+
+ 3. Give more explanation in the error message when the command for a transport
+ filter fails to execute.
+
+ 4. There are several places where Exim runs a non-Exim command in a
+ subprocess. The SIGUSR1 signal should be disabled for these processes. This
+ was being done only for the command run by the queryprogram router. It is
+ now done for all such subprocesses. The other cases are: ${run, transport
+ filters, and the commands run by the lmtp and pipe transports.
+
+ 5. Some older OS have a limit of 256 on the maximum number of file
+ descriptors. Exim was using setrlimit() to set 1000 as a large value
+ unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
+ systems. I've change it so that if it can't get 1000, it tries for 256.
+
+ 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
+ was an oversight, and furthermore, ever since the addition of extra
+ controls (e.g. 4.43/32), the checks on when to allow different forms of
+ "control" were broken. There should now be diagnostics for all cases when a
+ control that does not make sense is encountered.
+
+ 7. $recipients is now available in the predata ACL (oversight).
+
+ 8. Tidy the search cache before the fork to do a delivery from a message
+ received from the command line. Otherwise the child will trigger a lookup
+ failure and thereby defer the delivery if it tries to use (for example) a
+ cached ldap connection that the parent has called unbind on.
+
+ 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
+ of $address_data from the recipient verification was clobbered by the
+ sender verification.
+
+10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
+ was its contents. (It was OK if the option was not defined at all.)
+
+11. A "Completed" log line is now written for messages that are removed from
+ the spool by the -Mrm option.
+
+12. $host_address is now set to the target address during the checking of
+ ignore_target_hosts.
+
+13. When checking ignore_target_hosts for an ipliteral router, no host name was
+ being passed; this would have caused $sender_host_name to have been used if
+ matching the list had actually called for a host name (not very likely,
+ since this list is usually IP addresses). A host name is now passed as
+ "[x.x.x.x]".
+
+14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
+ code that specifies a non-restarting handler (typically sigaction() in
+ modern systems) in an attempt to fix a rare and obscure crash bug.
+
+15. Narrowed the window for a race in the daemon that could cause it to ignore
+ SIGCHLD signals. This is not a major problem, because they are used only to
+ wake it up if nothing else does.
+
+16. A malformed maildirsize file could cause Exim to calculate negative values
+ for the mailbox size or file count. Odd effects could occur as a result.
+ The maildirsize information is now recalculated if the size or filecount
+ end up negative.
+
+17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
+ support for a long time. Removed HAVE_SYS_VFS_H.
+
+18. Updated exipick to current release from John Jetmore.
+
+19. Allow an empty sender to be matched against a lookup in an address list.
+ Previously the only cases considered were a regular expression, or an
+ empty pattern.
+
+20. Exim went into a mad DNS lookup loop when doing a callout where the
+ host was specified on the transport, if the DNS lookup yielded more than
+ one IP address.
+
+21. The RFC2047 encoding function was originally intended for short strings
+ such as real names; it was not keeping to the 75-character limit for
+ encoded words that the RFC imposes. It now respects the limit, and
+ generates multiple encoded words if necessary. To be on the safe side, I
+ have increased the buffer size for the ${rfc2047: expansion operator from
+ 1024 to 2048 bytes.
+
+22. Failure to deliver a bounce message always caused it to be frozen, even if
+ there was an errors_to setting on the router. The errors_to setting is now
+ respected.
+
+23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
+ canonical form (fully expanded) before being placed in
+ $sender_host_address.
+
+24. Updated eximstats to version 1.33
+
+25. Include certificate and key file names in error message when GnuTLS fails
+ to set them up, because the GnuTLS error message doesn't include the name
+ of the failing file when there is a problem reading it.
+
+26. Expand error message when OpenSSL has problems setting up cert/key files.
+ As per change 25.
+
+27. Reset the locale to "C" after calling embedded Perl, in case it was changed
+ (this can affect the format of dates).
+
+28. exim_tidydb, when checking for the continued existence of a message for
+ which it has found a message-specific retry record, was not finding
+ messages that were in split spool directories. Consequently, it was
+ deleting retry records that should have stayed in existence.
+
+29. eximstats updated to version 1.35
+ 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
+ 1.35 - bugfix such that pie charts by volume are generated correctly
+
+30. The SPA authentication driver was not abandoning authentication and moving
+ on to the next authenticator when an expansion was forced to fail,
+ contradicting the general specification for all authenticators. Instead it
+ was generating a temporary error. It now behaves as specified.
+
+31. The default ordering of permitted cipher suites for GnuTLS was pessimal
+ (the order specifies the preference for clients). The order is now AES256,
+ AES128, 3DES, ARCFOUR128.
+
+31. Small patch to Sieve code - explicitly set From: when generating an
+ autoreply.
+
+32. Exim crashed if a remote delivery caused a very long error message to be
+ recorded - for instance if somebody sent an entire SpamAssassin report back
+ as a large number of 550 error lines. This bug was coincidentally fixed by
+ increasing the size of one of Exim's internal buffers (big_buffer) that
+ happened as part of the Exiscan merge. However, to be on the safe side, I
+ have made the code more robust (and fixed the comments that describe what
+ is going on).
+
+33. Some experimental protocols are using DNS PTR records for new purposes. The
+ keys for these records are domain names, not reversed IP addresses. The
+ dnsdb PTR lookup now tests whether its key is an IP address. If not, it
+ leaves it alone. Component reversal etc. now happens only for IP addresses.
+ CAN-2005-0021
+
+34. The host_aton() function is supposed to be passed a string that is known
+ to be a valid IP address. However, in the case of IPv6 addresses, it was
+ not checking this. This is a hostage to fortune. Exim now panics and dies
+ if the condition is not met. A case was found where this could be provoked
+ from a dnsdb PTR lookup with an IPv6 address that had more than 8
+ components; fortuitously, this particular loophole had already been fixed
+ by change 4.50/55 or 4.44/33 above.
+
+ If there are any other similar loopholes, the new check in host_aton()
+ itself should stop them being exploited. The report I received stated that
+ data on the command line could provoke the exploit when Exim was running as
+ exim, but did not say which command line option was involved. All I could
+ find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
+ running as the user.
+ CAN-2005-0021
+
+35. There was a buffer overflow vulnerability in the SPA authentication code
+ (which came originally from the Samba project). I have added a test to the
+ spa_base64_to_bits() function which I hope fixes it.
+ CAN-2005-0022
+
+36. The daemon start-up calls getloadavg() while still root for those OS that
+ need the first call to be done as root, but it missed one case: when
+ deliver_queue_load_max is set with deliver_drop_privilege. This is
+ necessary for the benefit of the queue runner, because there is no re-exec
+ when deliver_drop_privilege is set.
+
+37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
+ was in use, was not putting the data itself into the right store pool;
+ consequently, it could be overwritten for a subsequent message in the same
+ SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
+ the caching.)
+
+38. Sometimes the final signoff response after QUIT could fail to get
+ transmitted in the non-TLS case. Testing !tls_active instead of tls_active
+ < 0 before doing a fflush(). This bug looks as though it goes back to the
+ introduction of TLS in release 3.20, but "sometimes" must have been rare
+ because the tests only now provoked it.
+
Exim version 4.43
-----------------
git://git.exim.org / users / heiko / exim.git / blobdiff