.next
Individual routers can be explicitly skipped when running the routers to
check an address given in the SMTP EXPN command (see the &%expn%& option).
+
.next
If the &%domains%& option is set, the domain of the address must be in the set
of domains that it defines.
+.new
+.cindex "tainted data" "de-tainting"
+A match verifies the variable &$domain$& (which carries tainted data)
+and assigns an untainted value to the &$domain_data$& variable.
+Such an untainted value is often needed in the transport.
+For specifics of the matching operation and the resulting untainted value,
+refer to section &<<SECTdomainlist>>&.
+
+When an untainted value is wanted, use this option
+rather than the generic &%condition%& option.
+.wen
+
.next
.vindex "&$local_part_prefix$&"
.vindex "&$local_part_prefix_v$&"
.vindex "&$local_part_suffix_v$&"
.cindex affix "router precondition"
If the &%local_parts%& option is set, the local part of the address must be in
-the set of local parts that it defines. If &%local_part_prefix%& or
+the set of local parts that it defines.
+.new
+A match verifies the variable &$local_part$& (which carries tainted data)
+and assigns an untainted value to the &$local_part_data$& variable.
+Such an untainted value is often needed in the transport.
+For specifics of the matching operation and the resulting untainted value,
+refer to section &<<SECTlocparlis>>&.
+
+When an untainted value is wanted, use this option
+rather than the generic &%condition%& option.
+.wen
+
+If &%local_part_prefix%& or
&%local_part_suffix%& is in use, the prefix or suffix is removed from the local
part before this check. If you want to do precondition tests on local parts
that include affixes, you can do so by using a &%condition%& option (see below)
that uses the variables &$local_part$&, &$local_part_prefix$&,
&$local_part_prefix_v$&, &$local_part_suffix$&
and &$local_part_suffix_v$& as necessary.
+
.next
.vindex "&$local_user_uid$&"
.vindex "&$local_user_gid$&"
local user are placed in &$local_user_uid$& and &$local_user_gid$& and the
user's home directory is placed in &$home$&; these values can be used in the
remaining preconditions.
+
.next
If the &%router_home_directory%& option is set, it is expanded at this point,
because it overrides the value of &$home$&. If this expansion were left till
later, the value of &$home$& as set by &%check_local_user%& would be used in
subsequent tests. Having two different values of &$home$& in the same router
could lead to confusion.
+
.next
If the &%senders%& option is set, the envelope sender address must be in the
set of addresses that it defines.
+
.next
If the &%require_files%& option is set, the existence or non-existence of
specified files is tested.
+
.next
.cindex "customizing" "precondition"
If the &%condition%& option is set, it is evaluated and tested. This option
uses an expanded string to allow you to set up your own custom preconditions.
Expanded strings are described in chapter &<<CHAPexpand>>&.
+
+.new
+Note that while using
+this option for address matching technically works,
+it does not set any de-tainted values.
+Such values are often needed, either for router-specific options or
+for transport options.
+Using the &%domains%& and &%local_parts%& options is usually the most
+convenient way to obtain them.
+.wen
.endlist
A &%local_parts%& router option or &%local_parts%& ACL condition
will store a result in the &$local_part_data$& variable.
.vitem domains
+.new
A &%domains%& router option or &%domains%& ACL condition
+will store a result in the &$domain_data$& variable
+.wen
.vitem senders
A &%senders%& router option or &%senders%& ACL condition
will store a result in the &$sender_data$& variable.
.cindex "tainted data" definition
.cindex expansion "tainted data"
and expansion of data deriving from the sender (&"tainted data"&)
-is not permitted.
+.new
+is not permitted (including acessing a file using a tainted name).
+.wen
.new
Common ways of obtaining untainted equivalents of variables with
those headers that contain lists of addresses, a comma is also inserted at the
junctions between headers. This does not happen for the &%rheader%& expansion.
-.cindex "tainted data"
+.cindex "tainted data" "message headers"
When the headers are from an incoming message,
the result of expanding any of these variables is tainted.
example, a system filter could set a value indicating how likely it is that a
message is junk mail.
-.vitem &$spam_$&&'xxx'&
+.vitem &$spam_score$& &&&
+ &$spam_score_int$& &&&
+ &$spam_bar$& &&&
+ &$spam_report$& &&&
+ &$spam_action$&
A number of variables whose names start with &$spam$& are available when Exim
is compiled with the content-scanning extension. For details, see section
&<<SECTscanspamass>>&.
option to a true value. To avoid breaking existing installations, it
defaults to false.
+.new
+&*Note*&: This is entirely separate from Exim's tainted-data tracking.
+.wen
+
.section "Calling Perl subroutines" "SECID86"
When the configuration file includes a &%perl_startup%& option you can make use
.row &%local_scan_timeout%& "timeout for &[local_scan()]&"
.row &%message_size_limit%& "for all messages"
.row &%percent_hack_domains%& "recognize %-hack for these domains"
+.row &%proxy_protocol_timeout%& "timeout for proxy protocol negotiation"
.row &%spamd_address%& "set interface to SpamAssassin"
.row &%strict_acl_vars%& "object to unset ACL variables"
.row &%spf_smtp_comment_template%& "template for &$spf_smtp_comment$&"
.option pipelining_connect_advertise_hosts main "host list&!!" *
.cindex "pipelining" "early connection"
.cindex "pipelining" PIPE_CONNECT
-.cindex "ESMTP extensions" X_PIPE_CONNECT
+.cindex "ESMTP extensions" PIPE_CONNECT
If Exim is built with the SUPPORT_PIPE_CONNECT build option
this option controls which hosts the facility is advertised to
and from which pipeline early-connection (before MAIL) SMTP
See also the &%hosts_pipe_connect%& smtp transport option.
-Currently the option name &"X_PIPE_CONNECT"& is used.
+.new
+The SMTP service extension keyword advertised is &"PIPE_CONNECT"&.
+.wen
.option prdr_enable main boolean false
&%queue_list_requires_admin%& and &%commandline_checks_require_admin%&.
+.new
+.option proxy_protocol_timeout main time 3s
+.cindex proxy "proxy protocol"
+This option sets the timeout for proxy protocol negotiation.
+For details see section &<<SECTproxyInbound>>&.
+.wen
+
+
.option qualify_domain main string "see below"
.cindex "domain" "for qualifying addresses"
.cindex "address" "qualification"
deliveries if the configuration allows a delivery attempt as soon as a message
is received.
+See also the &%max_parallel%& generic transport option,
+and the &%serialize_hosts%& smtp transport option.
+
.cindex "number of deliveries"
.cindex "delivery" "maximum number of"
If you want to control the total number of deliveries on the system, you
the value is a file then the certificates are sent by Exim as a server to
connecting clients, defining the list of accepted certificate authorities.
Thus the values defined should be considered public data. To avoid this,
-use the explicit directory version.
+use the explicit directory version. (If your peer is Exim up to 4.85,
+using GnuTLS, you may need to send the CAs (thus using the file
+variant). Otherwise the peer doesn't send its certificate.)
See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
local system. The check is done by calling the &[getpwnam()]& function rather
than trying to read &_/etc/passwd_& directly. This means that other methods of
holding password data (such as NIS) are supported. If the local part is a local
-user, &$home$& is set from the password data, and can be tested in other
+user,
+.cindex "tainted data" "de-tainting"
+&$local_part_data$& is set to an untainted version of the local part and
+&$home$& is set from the password data. The latter can be tested in other
preconditions that are evaluated after this one (the order of evaluation is
given in section &<<SECTrouprecon>>&). However, the value of &$home$& can be
overridden by &%router_home_directory%&. If the local part is not a local user,
If this option is set, the router is skipped unless the current domain matches
the list. If the match is achieved by means of a file lookup, the data that the
lookup returned for the domain is placed in &$domain_data$& for use in string
-expansions of the driver's private options. See section &<<SECTrouprecon>>& for
+expansions of the driver's private options and in the transport.
+See section &<<SECTrouprecon>>& for
a list of the order in which preconditions are evaluated.
string is expanded, it is possible to make it depend on the domain, for
example:
.code
-local_parts = dbm;/usr/local/specials/$domain
+local_parts = dbm;/usr/local/specials/$domain_data
.endd
.vindex "&$local_part_data$&"
If the match is achieved by a lookup, the data that the lookup returned
for the local part is placed in the variable &$local_part_data$& for use in
-expansions of the router's private options. You might use this option, for
+expansions of the router's private options or in the transport.
+You might use this option, for
example, if you have a large number of local virtual domains, and you want to
send all postmaster mail to the same place without having to set up an alias in
each virtual domain:
When a router runs, the strings are evaluated in order,
to create variables which are added to the set associated with
the address.
+.new
+This is done immediately after all the preconditions, before the
+evaluation of the &%address_data%& option.
+.wen
The variable is set with the expansion of the value.
The variables can be used by the router options
(not including any preconditions)
.option command_timeout smtp time 5m
+.cindex timeout "smtp transport command"
This sets a timeout for receiving a response to an SMTP command that has been
sent out. It is also used when waiting for the initial banner line from the
remote host. Its value must not be zero.
.option connect_timeout smtp time 5m
+.cindex timeout "smtp transport connect"
This sets a timeout for the &[connect()]& function, which sets up a TCP/IP call
to a remote host. A setting of zero allows the system timeout (typically
several minutes) to act. To have any effect, the value of this option must be
.option data_timeout smtp time 5m
+.cindex timeout "for transmitted SMTP data blocks"
This sets a timeout for the transmission of each block in the data portion of
the message. As a result, the overall timeout for a message depends on the size
of the message. Its value must not be zero. See also &%final_timeout%&.
.option final_timeout smtp time 10m
+.cindex timeout "for transmitted SMTP data accept"
This is the timeout that applies while waiting for the response to the final
line containing just &"."& that terminates a message. Its value must not be
zero.
.cindex "authentication" "optional in client"
This option provides a list of servers to which, provided they announce
authentication support, Exim will attempt to authenticate as a client when it
-connects. If authentication fails, Exim will try to transfer the message
-unauthenticated. See also &%hosts_require_auth%&, and chapter
-&<<CHAPSMTPAUTH>>& for details of authentication.
+connects. If authentication fails
+.new
+and &%hosts_require_auth%& permits,
+.wen
+Exim will try to transfer the message unauthenticated.
+See also chapter &<<CHAPSMTPAUTH>>& for details of authentication.
.option hosts_try_chunking smtp "host list&!!" *
.cindex CHUNKING "enabling, in client"
&$address_data$&, &$domain_data$&, &$local_part_data$&,
&$host$&, &$host_address$& and &$host_port$&.
+.new
+If the connection is DANE-enabled then this option is ignored;
+only messages having the domain used for the DANE TLSA lookup are
+sent on the connection.
+.wen
+
.option port smtp string&!! "see below"
.cindex "port" "sending TCP/IP"
.cindex "TCP/IP" "setting outgoing port"
.ilist
The client host must match &%auth_advertise_hosts%& (default *).
.next
-It the &%server_advertise_condition%& option is set, its expansion must not
+If the &%server_advertise_condition%& option is set, its expansion must not
yield the empty string, &"0"&, &"no"&, or &"false"&.
.endlist
.endd
gives an incorrect answer because of the unescaped &"@"& and &"$"& characters.
-If you have the &%mimencode%& command installed, another way to do produce
+If you have the &%mimencode%& command installed, another way to produce
base64-encoded strings is to run the command
.code
echo -e -n `\0user\0password' | mimencode
.endd
+.new
+.section "Caching of static server configuration items" "SECTserverTLScache"
+.cindex certificate caching
+.cindex privatekey caching
+.cindex crl caching
+.cindex ocsp caching
+.cindex ciphers caching
+.cindex "CA bundle" caching
+.cindex "certificate authorities" caching
+.cindex tls_certificate caching
+.cindex tls_privatekey caching
+.cindex tls_crl caching
+.cindex tls_ocsp_file caching
+.cindex tls_require_ciphers caching
+.cindex tls_verify_certificate caching
+.cindex caching certificate
+.cindex caching privatekey
+.cindex caching crl
+.cindex caching ocsp
+.cindex caching ciphers
+.cindex caching "certificate authorities
+If any of the main configuration options &%tls_certificate%&, &%tls_privatekey%&,
+&%tls_crl%& and &%tls_ocsp_file%& have values with no
+expandable elements,
+then the associated information is loaded at daemon startup.
+It is made available
+to child processes forked for handling received SMTP connections.
+
+This caching is currently only supported under Linux and FreeBSD.
+
+If caching is not possible, for example if an item has to be dependent
+on the peer host so contains a &$sender_host_name$& expansion, the load
+of the associated information is done at the startup of the TLS connection.
+
+The cache is invalidated and reloaded after any changes to the directories
+containing files specified by these options.
+
+The information specified by the main option &%tls_verify_certificates%&
+is similarly cached so long as it specifies files explicitly
+or (under GnuTLS) is the string &"system,cache"&.
+The latter case is not automatically invalidated;
+it is the operator's responsibility to arrange for a daemon restart
+any time the system certificate authority bundle is updated.
+A HUP signal is sufficient for this.
+The value &"system"& results in no caching under GnuTLS.
+
+The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
+is acceptable in configurations for the Exim executavble.
+
+Caching of the system Certificate Authorities bundle can
+save siginificant time and processing on every TLS connection
+accepted by Exim.
+.wen
+
+
.section "Configuring an Exim client to use TLS" "SECTclientTLS"
The &%tls_certificate%& and &%tls_privatekey%& options of the &(smtp)&
transport provide the client with a certificate, which is passed to the server
-if it requests it. If the server is Exim, it will request a certificate only if
+if it requests it.
+This is an optional thing for TLS connections, although either end
+may insist on it.
+If the server is Exim, it will request a certificate only if
&%tls_verify_hosts%& or &%tls_try_verify_hosts%& matches the client.
&*Note*&: Do not use a certificate which has the OCSP-must-staple extension,
+.new
+.section "Caching of static client configuration items" "SECTclientTLScache"
+.cindex certificate caching
+.cindex privatekey caching
+.cindex crl caching
+.cindex ciphers caching
+.cindex "CA bundle" caching
+.cindex "certificate authorities" caching
+.cindex tls_certificate caching
+.cindex tls_privatekey caching
+.cindex tls_crl caching
+.cindex tls_require_ciphers caching
+.cindex tls_verify_certificate caching
+.cindex caching certificate
+.cindex caching privatekey
+.cindex caching crl
+.cindex caching ciphers
+.cindex caching "certificate authorities
+If any of the transport configuration options &%tls_certificate%&, &%tls_privatekey%&
+and &%tls_crl%& have values with no
+expandable elements,
+then the associated information is loaded per smtp transport
+at daemon startup, at the start of a queue run, or on a
+command-line specified message delivery.
+It is made available
+to child processes forked for handling making SMTP connections.
+
+This caching is currently only supported under Linux.
+
+If caching is not possible, the load
+of the associated information is done at the startup of the TLS connection.
+
+The cache is invalidated in the daemon
+and reloaded after any changes to the directories
+containing files specified by these options.
+
+The information specified by the main option &%tls_verify_certificates%&
+is similarly cached so long as it specifies files explicitly
+or (under GnuTLS) is the string &"system,cache"&.
+The latter case is not automatically invaludated;
+it is the operator's responsibility to arrange for a daemon restart
+any time the system certificate authority bundle is updated.
+A HUP signal is sufficient for this.
+The value &"system"& results in no caching under GnuTLS.
+
+The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
+is acceptable in configurations for the Exim executavble.
+
+Caching of the system Certificate Authorities bundle can
+save siginificant time and processing on every TLS connection
+initiated by Exim.
+.wen
+
+
+
+
.section "Use of TLS Server Name Indication" "SECTtlssni"
.cindex "TLS" "Server Name Indication"
.cindex "TLS" SNI
for the lifetime of the client connection (including during authentication).
.new
-If DAVE validated the connection attempt then the value of the &%tls_sni%& option
+If DANE validated the connection attempt then the value of the &%tls_sni%& option
is forced to the domain part of the recipient address.
.wen
The &%per_rcpt%& option causes Exim to limit the rate at which recipients are
accepted. It can be used in the &%acl_smtp_rcpt%&, &%acl_smtp_predata%&,
-&%acl_smtp_mime%&, &%acl_smtp_data%&, or &%acl_smtp_rcpt%& ACLs. In
+&%acl_smtp_mime%&, or &%acl_smtp_data%& ACLs. In
&%acl_smtp_rcpt%& the rate is updated one recipient at a time; in the other
ACLs the rate is updated with the total (accepted) recipient count in one go. Note that
in either case the rate limiting engine will see a message with many
client's ident port times out.
.next
.cindex "log" "incoming interface"
+.cindex "log" "outgoing interface"
.cindex "log" "local interface"
.cindex "log" "local address and port"
.cindex "TCP/IP" "logging local address and port"
to the &"<="& line as an IP address in square brackets, tagged by I= and
followed by a colon and the port number. The local interface and port are also
added to other SMTP log lines, for example, &"SMTP connection from"&, to
-rejection lines, and (despite the name) to outgoing &"=>"& and &"->"& lines.
+rejection lines, and (despite the name) to outgoing
+.new
+&"=>"&, &"->"&, &"=="& and &"**"& lines.
+.wen
The latter can be disabled by turning off the &%outgoing_interface%& option.
.next
.cindex log "incoming proxy address"
"check address acceptance from given IP"
.irow &<<SECTdbmbuild>>& &'exim_dbmbuild'& "build a DBM file"
.irow &<<SECTfinindret>>& &'exinext'& "extract retry information"
-.irow &<<SECThindatmai>>& &'exim_dumpdb'& "dump a hints database"
-.irow &<<SECThindatmai>>& &'exim_tidydb'& "clean up a hints database"
-.irow &<<SECThindatmai>>& &'exim_fixdb'& "patch a hints database"
+.irow &<<SECTdumpdb>>& &'exim_dumpdb'& "dump a hints database"
+.irow &<<SECTtidydb>>& &'exim_tidydb'& "clean up a hints database"
+.irow &<<SECTfixdb>>& &'exim_fixdb'& "patch a hints database"
.irow &<<SECTmailboxmaint>>& &'exim_lock'& "lock a mailbox file"
.endtable
-.section "exim_dumpdb" "SECID261"
+.section "exim_dumpdb" "SECTdumpdb"
.cindex "&'exim_dumpdb'&"
The entire contents of a database are written to the standard output by the
&'exim_dumpdb'& program, which has no options or arguments other than the
-.section "exim_tidydb" "SECID262"
+.section "exim_tidydb" "SECTtidydb"
.cindex "&'exim_tidydb'&"
The &'exim_tidydb'& utility program is used to tidy up the contents of a hints
database. If run with no options, it removes all records that are more than 30
-.section "exim_fixdb" "SECID263"
+.section "exim_fixdb" "SECTfixdb"
.cindex "&'exim_fixdb'&"
The &'exim_fixdb'& program is a utility for interactively modifying databases.
Its main use is for testing Exim, but it might also be occasionally useful for
Signing is enabled by setting private options on the SMTP transport.
These options take (expandable) strings as arguments.
-.option dkim_domain smtp string list&!! unset
+.option dkim_domain smtp "string list&!!" unset
The domain(s) you want to sign with.
After expansion, this can be a list.
Each element in turn,
If it is empty after expansion, DKIM signing is not done,
and no error will result even if &%dkim_strict%& is set.
-.option dkim_selector smtp string list&!! unset
+.option dkim_selector smtp "string list&!!" unset
This sets the key selector string.
After expansion, which can use &$dkim_domain$&, this can be a list.
Each element in turn is put in the expansion
.code
#macro
SRS_SECRET = <pick something unique for your site for this. Use on all MXs.>
-
+
#routers
outbound:
transport = ${if eq {$local_part@$domain} \
{$original_local_part@$original_domain} \
{remote_smtp} {remote_forwarded_smtp}}
-
+
inbound_srs:
driver = redirect
senders = :
# detect inbound bounces which are SRS'd, and decode them
condition = ${if inbound_srs {$local_part} {SRS_SECRET}}
data = $srs_recipient
-
+
inbound_srs_failure:
driver = redirect
senders = :
#... further routers here
-
+
# transport; should look like the non-forward outbound
# one, plus the max_rcpt and return_path options
remote_forwarded_smtp:
The Proxy Protocol header is the first data received on a TCP connection
and is inserted before any TLS-on-connect handshake from the client; Exim
negotiates TLS between Exim-as-server and the remote client, not between
-Exim and the proxy server.
+Exim and the proxy server. The Proxy Protocol header must be received
+within &%proxy_protocol_timeout%&, which defaults to 3s.
The following expansion variables are usable
(&"internal"& and &"external"& here refer to the interfaces
git://git.exim.org / users / heiko / exim.git / blobdiff