kevent: handle OpenBSD API anomaly

[users/heiko/exim.git] / test / runtest

diff --git a/test/runtest b/test/runtest
index 0dc5ec9670b54834634d46784ac4b0207a7bd906..a6ae2844764f3d9907bb27b2ca2ac0261926cd76 100755 (executable)
--- a/test/runtest
+++ b/test/runtest
@@ -404,7 +404,7 @@ RESET_AFTER_EXTRA_LINE_READ:
 
   # Replace the Exim version number (may appear in various places)
   # patchexim should have fixed this for us
 
   # Replace the Exim version number (may appear in various places)
   # patchexim should have fixed this for us

-  #s/(Exim) \d+\.\d+[\w_-]*/$1 x.yz/i;
+  #s/Exim \K\d+[._]\d+[\w_-]*/x.yz/i;

 
   # Replace Exim message ids by a unique series
   s/((?:[^\W_]{6}-){2}[^\W_]{2})
 
   # Replace Exim message ids by a unique series
   s/((?:[^\W_]{6}-){2}[^\W_]{2})


@@ -461,8 +461,8 @@ RESET_AFTER_EXTRA_LINE_READ:
     my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
     $expired = '' if !defined $expired;
 
     my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
     $expired = '' if !defined $expired;
 

-    # Round the time-difference up to nearest even value
-    my($increment) = ((date_seconds($date3) - date_seconds($date2) + 1) >> 1) << 1;
+    # Round the time-difference down to nearest even value
+    my($increment) = ((date_seconds($date3) - date_seconds($date2)) >> 1) << 1;

 
     # We used to use globally unique replacement values, but timing
     # differences make this impossible. Just show the increment on the
 
     # We used to use globally unique replacement values, but timing
     # differences make this impossible. Just show the increment on the


@@ -827,11 +827,10 @@ RESET_AFTER_EXTRA_LINE_READ:
 
   # ======== IP error numbers and messages ========
   # These vary between operating systems
 
   # ======== IP error numbers and messages ========
   # These vary between operating systems

-  s/Can't assign requested address/Network Error/;
-  s/Cannot assign requested address/Network Error/;
+  s/Can(no|')t assign requested address/Network Error/;

   s/Operation timed out/Connection timed out/;
   s/Address family not supported by protocol family/Network Error/;
   s/Operation timed out/Connection timed out/;
   s/Address family not supported by protocol family/Network Error/;

-  s/Network is unreachable/Network Error/;
+  s/Network( is)? unreachable/Network Error/;

   s/Invalid argument/Network Error/;
 
   s/\(\d+\): Network/(dd): Network/;
   s/Invalid argument/Network Error/;
 
   s/\(\d+\): Network/(dd): Network/;


@@ -917,7 +916,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/renamed tmp\/\d+\.[^.]+\.(\S+) as new\/\d+\.[^.]+\.(\S+)/renamed tmp\/MAILDIR.$1 as new\/MAILDIR.$1/;
 
   # Maildir file names in general
   s/renamed tmp\/\d+\.[^.]+\.(\S+) as new\/\d+\.[^.]+\.(\S+)/renamed tmp\/MAILDIR.$1 as new\/MAILDIR.$1/;
 
   # Maildir file names in general

-  s/\b\d+\.H\d+P\d+\b/dddddddddd.HddddddPddddd/;
+  s/\b\d+\.M\d+P\d+\b/dddddddddd.HddddddPddddd/;

 
   # Maildirsize data
   while (/^\d+S,\d+C\s*$/)
 
   # Maildirsize data
   while (/^\d+S,\d+C\s*$/)


@@ -935,7 +934,7 @@ RESET_AFTER_EXTRA_LINE_READ:
 
   # SRS timestamps and signatures vary by hostname and from run to run
 
 
   # SRS timestamps and signatures vary by hostname and from run to run
 

-  s/SRS0=....=..=[^=]+=[^@]+\@test.ex/SRS0=ZZZZ=YY=the.local.host.name=CALLER\@test.ex/;
+  s/(?i)SRS0=....=.[^=]?=([^=]+)=([^@]+)\@([^ ]+)/SRS0=ZZZZ=YY=$1=$2\@$3/g;

 
 
   # ======== Output from the "fd" program about open descriptors ========
 
 
   # ======== Output from the "fd" program about open descriptors ========


@@ -952,12 +951,6 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/^\d\d\d(?=[PFS*])/ddd/;
 
 
   s/^\d\d\d(?=[PFS*])/ddd/;
 
 

-  # ========= Exim lookups ==================
-  # Lookups have a char which depends on the number of lookup types compiled in,
-  # in stderr output.  Replace with a "0".  Recognising this while avoiding
-  # other output is fragile; perhaps the debug output should be revised instead.
-  s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
-

   # ==========================================================
   # MIME boundaries in RFC3461 DSN messages
   s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
   # ==========================================================
   # MIME boundaries in RFC3461 DSN messages
   s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;


@@ -1029,6 +1022,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     # TLS resumption is not always supported by the build
     next if /^tls_resumption_hosts =/;
     next if /^-tls_resumption/;
     # TLS resumption is not always supported by the build
     next if /^tls_resumption_hosts =/;
     next if /^-tls_resumption/;

+
+    # gsasl library version may not support some methods
+    s/250-AUTH ANONYMOUS PLAIN SCRAM-SHA-1\K SCRAM-SHA-256//;

     }
 
   # ======== stderr ========
     }
 
   # ======== stderr ========


@@ -1044,15 +1040,25 @@ RESET_AFTER_EXTRA_LINE_READ:
     s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
     s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
     s/^(?:\s*\d+ )(exec .* -oPX)$/pppp $1/;
     s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
     s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
     s/^(?:\s*\d+ )(exec .* -oPX)$/pppp $1/;

+    next if /(?:postfork: | fork(?:ing|ed) for )/;

 
     # IP address lookups use gethostbyname() when IPv6 is not supported,
     # and gethostbyname2() or getipnodebyname() when it is.
 
     s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
 
 
     # IP address lookups use gethostbyname() when IPv6 is not supported,
     # and gethostbyname2() or getipnodebyname() when it is.
 
     s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
 

+    # Extra lookups done when ipv6 is supported
+    next if /^host_fake_gethostbyname\(af=inet6\) returned 1 \(HOST_NOT_FOUND\)$/;
+

     # we don't care what TZ enviroment the testhost was running
     next if /^Reset TZ to/;
 
     # we don't care what TZ enviroment the testhost was running
     next if /^Reset TZ to/;
 

+    # ========= Exim lookups ==================
+    # Lookups have a char which depends on the number of lookup types compiled in,
+    # in stderr output.  Replace with a "0".  Recognising this while avoiding
+    # other output is fragile; perhaps the debug output should be revised instead.
+    s%^\s+(:?closing )?\K[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
+

     # drop gnutls version strings
     next if /GnuTLS compile-time version: \d+[\.\d]+$/;
     next if /GnuTLS runtime version: \d+[\.\d]+$/;
     # drop gnutls version strings
     next if /GnuTLS compile-time version: \d+[\.\d]+$/;
     next if /GnuTLS runtime version: \d+[\.\d]+$/;


@@ -1064,6 +1070,33 @@ RESET_AFTER_EXTRA_LINE_READ:
     # this is timing-dependent
     next if /^OpenSSL: creating STEK$/;
 
     # this is timing-dependent
     next if /^OpenSSL: creating STEK$/;
 

+    # TLS preload
+    # only OpenSSL speaks of these
+    next if /^TLS: preloading (DH params|ECDH curve|CA bundle) for server/;
+    next if /^Diffie-Hellman initialized from default/;
+    next if /^ECDH OpenSSL [< ]?[\d.+]+ temp key parameter settings:/;
+    next if /^ECDH: .'*prime256v1'/;
+    next if /^tls_verify_certificates: system$/;
+    next if /^tls_set_watch: .*\/cert.pem/;
+
+    # TLS preload
+    # only GnuTLS speaks of these
+    next if /^GnuTLS global init required$/;
+    next if /^TLS: basic cred init, server/;
+    next if /^TLS: preloading cipher list for server: NULL$/;
+    s/^GnuTLS using default session cipher\/priority "NORMAL"$/TLS: not preloading cipher list for server/;
+    next if /^GnuTLS<2>: added \d+ protocols, \d+ ciphersuites, \d+ sig algos and \d+ groups into priority list$/;
+
+    # only kevent platforms (FreeBSD, OpenBSD) say this
+    next if /^watch dir/;
+    next if /^watch file .*\/usr\/local/;
+    next if /^watch file .*\/etc\/ssl/;
+
+    # TLS preload
+    # there happen in different orders for OpenSSL/GnuTLS/noTLS
+    next if /^TLS: not preloading (CA bundle|cipher list) for server$/;
+    next if /^TLS: not preloading server certs$/;
+

     # drop lookups
     next if /^Lookups \(built-in\):/;
     next if /^Loading lookup modules from/;
     # drop lookups
     next if /^Lookups \(built-in\):/;
     next if /^Loading lookup modules from/;


@@ -1207,12 +1240,27 @@ RESET_AFTER_EXTRA_LINE_READ:
     # timing variance, run-to-run
     s/^time on queue = \K1s/0s/;
 
     # timing variance, run-to-run
     s/^time on queue = \K1s/0s/;
 

+    # content-scan: file order can vary in directory
+    s%unspool_mbox\(\): unlinking 'TESTSUITE/spool/scan/[^/]*/\K[^\']*%FFFFFFFFF%;
+

     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 
     # daemon notifier socket
     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 
     # daemon notifier socket

-    s/^\d+ creating notifier socket$/ppppp creating notifier socket/;
+    s/^(\s*\d+|ppppp) (creating notifier socket)$/ppppp $2/;
+    s/^ \@(.*exim_daemon_notify)$/ $1/;
+    s/^(\s*\d+|ppppp)  \@?(.*exim_daemon_notify)$/ppppp  $2/;
+    next if /unlinking notifier socket/;
+
+    # daemon notifier socket
+    # Timing variance over runs.  Collapse repeated memssages.
+    if (/notify triggered queue run/)
+      {
+      my $line = $_;
+      while (/notify triggered queue run/) { $_ = <IN>; }
+      $_ = $line . $_;
+      }

 
     # DISABLE_OCSP
     next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
 
     # DISABLE_OCSP
     next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;


@@ -1315,6 +1363,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /^Waiting for MySQL server to answer/;
     next if /mysqladmin: CREATE DATABASE failed; .* database exists/;
 
     next if /^Waiting for MySQL server to answer/;
     next if /mysqladmin: CREATE DATABASE failed; .* database exists/;
 

+    # Postgres version-dependent differences
+    s/^initdb: warning: (enabling "trust" authentication for local connections)$/\nWARNING: $1/;
+

     # Not all builds include DMARC
     next if /^DMARC: no (dmarc_tld_file|sender_host_address)$/ ;
 
     # Not all builds include DMARC
     next if /^DMARC: no (dmarc_tld_file|sender_host_address)$/ ;
 


@@ -1415,6 +1466,9 @@ RESET_AFTER_EXTRA_LINE_READ:
       my ($prefix, $t_diff) = ($1, $3 - $2);
       s/DKIM: d=.* t=[0-9]* x=[0-9]* /${prefix} t=T x=T+${t_diff} /;
       }
       my ($prefix, $t_diff) = ($1, $3 - $2);
       s/DKIM: d=.* t=[0-9]* x=[0-9]* /${prefix} t=T x=T+${t_diff} /;
       }

+    # GnuTLS reports a different keysize vs. OpenSSL, for ed25519 keys
+    s/signer: [^ ]* bits:\K 256/ 253/;
+    s/public key too short:\K 256 bits/ 253 bits/;

 
     # port numbers
     s/(?:\[[^\]]*\]:|port )\K$parm_port_d/PORT_D/;
 
     # port numbers
     s/(?:\[[^\]]*\]:|port )\K$parm_port_d/PORT_D/;


@@ -2330,8 +2384,7 @@ if (/^gnutls/)
 
 
 # The "killdaemon" command should ultimately follow the starting of any Exim
 
 
 # The "killdaemon" command should ultimately follow the starting of any Exim

-# daemon with the -bd option. We kill with SIGINT rather than SIGTERM to stop
-# it outputting "Terminated" to the terminal when not in the background.
+# daemon with the -bd option.

 
 if (/^killdaemon/)
   {
 
 if (/^killdaemon/)
   {


@@ -2343,14 +2396,14 @@ if (/^killdaemon/)
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {

-      run_system("sudo /bin/kill -INT $pid");
+      run_system("sudo /bin/kill -TERM $pid");

       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {
       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {

-      run_system("sudo /bin/kill -INT $pid");
+      run_system("sudo /bin/kill -TERM $pid");

       close DAEMONCMD;                                   # Waits for process
       }
     }
       close DAEMONCMD;                                   # Waits for process
       }
     }


@@ -2752,8 +2805,9 @@ else { tests_exit(-1, "Command unrecognized in line $lineno: $_"); }
 
 
 # Run the command, with stdin connected to a pipe, and write the stdin data
 
 
 # Run the command, with stdin connected to a pipe, and write the stdin data

-# to it, with appropriate substitutions. If a line ends with \NONL\, chop off
-# the terminating newline (and the \NONL\). If the command contains
+# to it, with appropriate substitutions. If a starts with '>>> ', process it
+# via Perl's string eval().
+# If the command contains

 # -DSERVER=server add "-server" to the command, where it will adjoin the name
 # for the stderr file. See comment above about the use of -DSERVER.
 
 # -DSERVER=server add "-server" to the command, where it will adjoin the name
 # for the stderr file. See comment above about the use of -DSERVER.
 


@@ -2762,12 +2816,29 @@ print ">> |${cmd}${stderrsuffix}\n" if ($debug);
 open CMD, "|${cmd}${stderrsuffix}" || tests_exit(1, "Failed to run $cmd");
 
 CMD->autoflush(1);
 open CMD, "|${cmd}${stderrsuffix}" || tests_exit(1, "Failed to run $cmd");
 
 CMD->autoflush(1);

-while (<SCRIPT>)
+LINE: while (<SCRIPT>)

   {
   $lineno++;
   last if /^\*{4}\s*$/;
   do_substitute($testno);
   {
   $lineno++;
   last if /^\*{4}\s*$/;
   do_substitute($testno);

-  if (/^(.*)\\NONL\\\s*$/) { print CMD $1; } else { print CMD; }
+  if (my ($cmd, $line) = /^(:\S+?:)(.*)/) {
+    $_ = $line;
+      {
+      $cmd eq ':eval:' and do {
+        $_ = eval "\"$_\"";
+        last;
+      };
+      $cmd eq ':noeol:' and do {
+        s/[\r\n]*$//;
+        last;
+      };
+      $cmd eq ':sleep:' and do {
+        sleep $_;
+        next LINE;
+      };
+    }
+  }
+  print CMD;

   }
 
 # For timeout tests, wait before closing the pipe; we expect a
   }
 
 # For timeout tests, wait before closing the pipe; we expect a