1 $Cambridge: exim/doc/doc-txt/ChangeLog,v 1.55 2004/12/21 14:38:02 ph10 Exp $
3 Change log file for Exim from version 4.21
4 -------------------------------------------
9 1. Minor wording change to the doc/README.SIEVE file.
11 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
12 computation of the current number of files was incorrect.
14 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
15 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
18 4. Give more explanation in the error message when the command for a transport
19 filter fails to execute.
21 5. There are several places where Exim runs a non-Exim command in a
22 subprocess. The SIGUSR1 signal should be disabled for these processes. This
23 was being done only for the command run by the queryprogram router. It is
24 now done for all such subprocesses. The other cases are: ${run, transport
25 filters, and the commands run by the lmtp and pipe transports.
27 6. Added CONFIGURE_GROUP build-time option.
29 7. Some older OS have a limit of 256 on the maximum number of file
30 descriptors. Exim was using setrlimit() to set 1000 as a large value
31 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
32 systems. I've change it so that if it can't get 1000, it tries for 256.
34 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
35 was an oversight, and furthermore, ever since the addition of extra
36 controls (e.g. 4.43/32), the checks on when to allow different forms of
37 "control" were broken. There should now be diagnostics for all cases when a
38 control that does not make sense is encountered.
40 9. Added the /retain_sender option to "control=submission".
42 10. $recipients is now available in the predata ACL (oversight).
44 11. Tidy the search cache before the fork to do a delivery from a message
45 received from the command line. Otherwise the child will trigger a lookup
46 failure and thereby defer the delivery if it tries to use (for example) a
47 cached ldap connection that the parent has called unbind on.
49 12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
50 of $address_data from the recipient verification was clobbered by the
53 13. The value of address_data from a sender verification is now available in
54 $sender_address_data in subsequent conditions in the ACL statement.
56 14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
58 15. Added a new option "connect=<time>" to callout options, to set a different
61 16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
62 was its contents. (It was OK if the option was not defined at all.)
64 17. A "Completed" log line is now written for messages that are removed from
65 the spool by the -Mrm option.
67 18. New variables $sender_verify_failure and $recipient_verify_failure contain
68 information about exactly what failed.
70 19. Added -dd to debug only the daemon process.
72 20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
73 handles timeouts, both on the server side and network timeouts. Renamed the
74 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
76 21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
77 It is now set to "smtps".
79 22. $host_address is now set to the target address during the checking of
82 23. When checking ignore_target_hosts for an ipliteral router, no host name was
83 being passed; this would have caused $sender_host_name to have been used if
84 matching the list had actually called for a host name (not very likely,
85 since this list is usually IP addresses). A host name is now passed as
88 24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
89 code that specifies a non-restarting handler (typically sigaction() in
90 modern systems) in an attempt to fix a rare and obscure crash bug.
92 25. Narrowed the window for a race in the daemon that could cause it to ignore
93 SIGCHLD signals. This is not a major problem, because they are used only to
94 wake it up if nothing else does.
96 26. A malformed maildirsize file could cause Exim to calculate negative values
97 for the mailbox size or file count. Odd effects could occur as a result.
98 The maildirsize information is now recalculated if the size or filecount
101 27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
102 support for a long time. Removed HAVE_SYS_VFS_H.
104 28. Installed the latest version of exipick from John Jetmore.
106 29. In an address list, if the pattern was not a regular expression, an empty
107 subject address (from a bounce message) matched only if the pattern was an
108 empty string. Non-empty patterns were not even tested. This was the wrong
109 because it is perfectly reasonable to use an empty address as part of a
110 database query. An empty address is now tested by patterns that are
111 lookups. However, all the other forms of pattern expect the subject to
112 contain a local part and a domain, and therefore, for them, an empty
113 address still always fails if the pattern is not itself empty.
115 30. Exim went into a mad DNS loop when attempting to do a callout where the
116 host was specified on an smtp transport, and looking it up yielded more
119 31. Re-factored the code for checking spool and log partition space into a
120 function that finds that data and another that does the check. The former
121 is then used to implement four new variables: $spool_space, $log_space,
122 $spool_inodes, and $log_inodes.
124 32. The RFC2047 encoding function was originally intended for short strings
125 such as real names; it was not keeping to the 75-character limit for
126 encoded words that the RFC imposes. It now respects the limit, and
127 generates multiple encoded words if necessary. To be on the safe side, I
128 have increased the buffer size for the ${rfc2047: expansion operator from
131 33. It is now permitted to omit both strings after an "if" condition; if the
132 condition is true, the result is "true". As before, when the second string
133 is omitted, a false condition yields an empty string. This makes it less
134 cumbersome to write custom ACL and router conditions.
136 34. Failure to deliver a bounce message always caused it to be frozen, even if
137 there was an errors_to setting on the router. The errors_to setting is now
140 35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
141 canonical form (fully expanded) before being placed in
142 $sender_host_address.
144 36. The table in the code that translates DNS record types into text (T_A to
145 "A" for instance) was missing entries for NS and CNAME. It is just possible
146 that this could have caused confusion if both these types were looked up
147 for the same domain, because the text type is used as part of Exim's
148 per-process caching. But the chance of anyone hitting this buglet seems
151 37. The dnsdb lookup has been extended in a number of ways.
153 (1) There is a new type, "zns", which walks up the domain tree until it
154 finds some nameserver records. It should be used with care.
156 (2) There is a new type, "mxh", which is like "mx" except that it returns
157 just the host names, not the priorities.
159 (3) It is now possible to give a list of domains (or IP addresses) to be
160 looked up. The behaviour when one of the lookups defers can be
161 controlled by a keyword.
163 (4) It is now possible to specify the separator character for use when
164 multiple records are returned.
166 38. The dnslists ACL condition has been extended: it is now possible to supply
167 a list of IP addresses and/or domains to be looked up in a particular DNS
170 39. Added log_selector=+queue_time_overall.
172 40. When running the queue in the test harness, wait just a tad after forking a
173 delivery process, to get repeatability of debugging output.
175 41. Include certificate and key file names in error message when GnuTLS fails
176 to set them up, because the GnuTLS error message doesn't include the name
177 of the failing file when there is a problem reading it.
179 42. Allow both -bf and -bF in the same test run.
181 43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
183 44. The "Exiscan patch" is now merged into the mainline Exim source.
185 45. Sometimes the final signoff response after QUIT could fail to get
186 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
187 < 0 before doing a fflush(). This bug looks as though it goes back to the
188 introduction of TLS in release 3.20, but "sometimes" must have been rare
189 because the tests only now provoked it.
191 46. Reset the locale to "C" after calling embedded Perl, in case it was changed
192 (this can affect the format of dates).
194 47. exim_tidydb, when checking for the continued existence of a message for
195 which it has found a message-specific retry record, was not finding
196 messages that were in split spool directories. Consequently, it was
197 deleting retry records that should have stayed in existence.
199 48. Steve fixed some bugs in eximstats.
201 49. The SPA authentication driver was not abandoning authentication and moving
202 on to the next authenticator when an expansion was forced to fail,
203 contradicting the general specification for all authenticators. Instead it
204 was generating a temporary error. It now behaves as specified.
206 50. The default ordering of permitted cipher suites for GnuTLS was pessimal
207 (the order specifies the preference for clients). The order is now AES256,
208 AES128, 3DES, ARCFOUR128.
210 51. Small patch to Sieve code - explicitly set From: when generating an
213 52. Exim crashed if a remote delivery caused a very long error message to be
214 recorded - for instance if somebody sent an entire SpamAssassin report back
215 as a large number of 550 error lines. This bug was coincidentally fixed by
216 increasing the size of one of Exim's internal buffers (big_buffer) that
217 happened as part of the Exiscan merge. However, to be on the safe side, I
218 have made the code more robust (and fixed the comments that describe what
221 53. Now that there can be additional text after "Completed" in log lines (if
222 the queue_time_overall log selector is set), a one-byte patch to exigrep
223 was needed to allow it to recognize "Completed" as not the last thing in
226 54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
227 patch that reportedly fixes this has been added. I am not expert enough to
228 create a test for it. This is what the patch creator wrote:
230 "I found a little strange behaviour of ldap code when working with
231 Windows 2003 AD Domain, where users was placed in more than one
232 Organization Units. When I tried to give exim partial DN, the exit code
233 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
234 But simultaneously result of request was absolutely normal ldap result,
235 so I produce this patch..."
237 55. Some experimental protocols are using DNS PTR records for new purposes. The
238 keys for these records are domain names, not reversed IP addresses. The
239 dnsdb lookup now tests whether it's key is an IP address. If not, it leaves
240 it alone. Component reversal etc. now happens only for IP addresses.
242 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
244 57. Double the size of the debug message buffer (to 2048) so that more of very
245 long debug lines gets shown.
251 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
252 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
253 Now it returns an integer. A number of calls were still expecting a T/F
254 return. Fortuitously, in all cases, the tests worked in OK situations,
255 which is the norm. However, things would have gone wrong on any write
256 failures on the smtp file descriptor. This function is used when sending
257 messages over SMTP and also when doing verify callouts.
259 2. When Exim is called to do synchronous delivery of a locally submitted
260 message (the -odf or -odi options), it no longer closes stderr before doing
263 3. Implemented the mua_wrapper option.
265 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
267 5. Implemented the functions header_remove(), header_testname(),
268 header_add_at_position(), and receive_remove_recipient(), and exported them
271 6. If an ACL "warn" statement specified the addition of headers, Exim already
272 inserted X-ACL-Warn: at the start if there was no header name. However, it
273 was not making this test for the second and subsequent header lines if
274 there were newlines in the string. This meant that an invalid header could
275 be inserted if Exim was badly configured.
277 7. Allow an ACL "warn" statement to add header lines at the start or after all
278 the Received: headers, as well as at the end.
280 8. Added the rcpt_4xx retry error code.
282 9. Added postmaster_mailfrom=xxx to callout verification option.
284 10. Added mailfrom=xxxx to the callout verification option, for verify=
287 11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
288 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
290 12. Inserted some casts to stop certain compilers warning when using pointer
291 differences as field lengths or precisions in printf-type calls (mostly
292 affecting debugging statements).
294 13. Added optional readline() support for -be (dynamically loaded).
296 14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
297 same clock tick as a message's arrival, so that its received time was the
298 same as the "first fail" time on the retry record, and that message
299 remained on the queue past the ultimate address timeout, every queue runner
300 would try a delivery (because it was past the ultimate address timeout) but
301 after another failure, the ultimate address timeout, which should have then
302 bounced the address, did not kick in. This was a "< instead of <=" error;
303 in most cases the first failure would have been in the next clock tick
304 after the received time, and all would be well.
306 15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
307 being recognized when the domain list was tested by the match_domain
308 condition in an expansion string.
310 16. Added the ${str2b64: operator.
312 17. Exim was always calling setrlimit() to set a large limit for the number of
313 processes, without checking whether the existing limit was already
314 adequate. (It did check for the limit on file descriptors.) Furthermore,
315 errors from getrlimit() and setrlimit() were being ignored. Now they are
316 logged to the main and panic logs, but Exim does carry on, to try to do its
317 job under whatever limits there are.
319 18. Imported PCRE 5.0.
321 19. Trivial typo in log message " temporarily refused connection" (the leading
324 20. If the log selector return_path_on_delivery was set and an address was
325 redirected to /dev/null, the delivery process crashed because it assumed
326 that a return path would always be set for a "successful" delivery. In this
327 case, the whole delivery is bypassed as an optimization, and therefore no
330 21. Internal re-arrangement: the function for sending a challenge and reading
331 a response while authentication was assuming a zero-terminated challenge
332 string. It's now changed to take a pointer and a length, to allow for
333 binary data in such strings.
335 22. Added the cyrus_sasl authenticator (code supplied by MBM).
337 23. Exim was not respecting finduser_retries when seeking the login of the
338 uid under which it was called; it was always trying 10 times. (The default
339 setting of finduser_retries is zero.) Also, it was sleeping after the final
340 failure, which is pointless.
342 24. Implemented tls_on_connect_ports.
344 25. Implemented acl_smtp_predata.
346 26. If the domain in control=submission is set empty, Exim assumes that the
347 authenticated id is a complete email address when it generates From: or
348 Sender: header lines.
350 27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
351 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
352 chown and chgrp in /bin and hostname in /usr/bin.
354 28. Exim was keeping the "process log" file open after each use, just as it
355 does for the main log. This opens the possibility of it remaining open for
356 long periods when the USR1 signal hits a daemon. Occasional processlog
357 errors were reported, that could have been caused by this. Anyway, it seems
358 much more sensible not to leave this file open at all, so that is what now
361 29. The long-running daemon process does not normally write to the log once it
362 has entered its main loop, and it closes the log before doing so. This is
363 so that log files can straightforwardly be renamed and moved. However,
364 there are a couple of unusual error situations where the daemon does write
365 log entries, and I had neglected to close the log afterwards.
367 30. The text of an SMTP error response that was received during a remote
368 delivery was being truncated at 512 bytes. This is too short for some of
369 the long messages that one sometimes sees. I've increased the limit to
372 31. It is now possible to make retry rules that apply only when a message has a
373 specific sender, in particular, an empty sender.
375 32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
376 it possible to be selective about when SMTP synchronization is enforced.
378 33. Added "control = caseful_local_part" and "control = "caselower_local_part".
380 32. Implemented hosts_connection_nolog.
382 33. Added an ACL for QUIT.
384 34. Setting "delay_warning=" to disable warnings was not working; it gave a
387 35. Added mailbox_size and mailbox_filecount to appendfile.
389 36. Added control = no_multiline_responses to ACLs.
391 37. There was a bug in the logic of the code that waits for the clock to tick
392 in the case where the clock went backwards by a substantial amount such
393 that the microsecond fraction of "now" was more than the microsecond
394 fraction of "then" (but the whole seconds number was less).
396 38. Added support for the libradius Radius client library this is found on
397 FreeBSD (previously only the radiusclient library was supported).
403 1. When certain lookups returned multiple values in the form name=value, the
404 quoting of the values was not always being done properly. Specifically:
405 (a) If the value started with a double quote, but contained no whitespace,
407 (b) If the value contained whitespace other than a space character (i.e.
408 tabs or newlines or carriage returns) it was not quoted.
409 This fix has been applied to the mysql and pgsql lookups by writing a
410 separate quoting function and calling it from the lookup code. The fix
411 should probably also be applied to nisplus, ibase and oracle lookups, but
412 since I cannot test any of those, I have not disturbed their existing code.
414 2. A hit in the callout cache for a specific address caused a log line with no
415 reason for rejecting RCPT. Now it says "Previous (cached) callout
416 verification failure".
418 3. There was an off-by-one bug in the queryprogram router. An over-long
419 return line was truncated at 256 instead of 255 characters, thereby
420 overflowing its buffer with the terminating zero. As well as fixing this, I
421 have increased the buffer size to 1024 (and made a note to document this).
423 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
424 when Exim is waiting for an SMTP response from a remote server, Exim
425 restarts its select() call on the socket, thereby resetting its timeout.
426 This is not a problem when such interrupts are rare. Somebody set up a cron
427 job to run exiwhat every 2 minutes, which is less than the normal select()
428 timeout (5 or 10 minutes). This meant that the select() timeout never
429 kicked in because it was always reset. I have fixed this by comparing the
430 time when an interrupt arrives with the time at the start of the first call
431 to select(). If more time than the timeout has elapsed, the interrupt is
432 treated as a timeout.
434 5. Some internal re-factoring in preparation for the addition of Sieve
435 extensions (by MH). In particular, the "personal" test is moved to a
436 separate function, and given an option for scanning Cc: and Bcc: (which is
437 not set for Exim filters).
439 6. When Exim created an email address using the login of the caller as the
440 local part (e.g. when creating a From: or Sender: header line), it was not
441 quoting the local part when it contained special characters such as @.
443 7. Installed new OpenBSD configuration files.
445 8. Reworded some messages for syntax errors in "and" and "or" conditions to
446 try to make them clearer.
448 9. Callout options, other than the timeout value, were being ignored when
449 verifying sender addresses in header lines. For example, when using
451 verify = header_sender/callout=no_cache
453 the cache was (incorrectly) being used.
455 10. Added a missing instance of ${EXE} to the exim_install script; this affects
456 only the Cygwin environment.
458 11. When return_path_on_delivery was set as a log selector, if different remote
459 addresses in the same message used different return paths and parallel
460 remote delivery occurred, the wrong values would sometimes be logged.
461 (Whenever a remote delivery process finished, the return path value from
462 the most recently started remote delivery process was logged.)
464 12. RFC 3848 specifies standard names for the "with" phrase in Received: header
465 lines when AUTH and/or TLS are in use. This is the "received protocol"
466 field. Exim used to use "asmtp" for authenticated SMTP, without any
467 indication (in the protocol name) for TLS use. Now it follows the RFC and
468 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
469 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
470 names appear in log lines as well as in Received: header lines.
472 13. Installed MH's patches for Sieve to add the "copy" and "vacation"
473 extensions, and comparison tests, and to fix some bugs.
475 14. Changes to the "personal" filter test:
477 (1) The test was buggy in that it was just doing the equivalent of
478 "contains" tests on header lines. For example, if a user's address was
479 anne@some.where, the "personal" test would incorrectly be true for
481 To: susanne@some.where
483 This test is now done by extracting each address from the header in turn,
484 and checking the entire address. Other tests that are part of "personal"
485 are now done using regular expressions (for example, to check local parts
486 of addresses in From: header lines).
488 (2) The list of non-personal local parts in From: addresses has been
489 extended to include "listserv", "majordomo", "*-request", and "owner-*",
490 taken from the Sieve specification recommendations.
492 (3) If the message contains any header line starting with "List-" it is
493 treated as non-personal.
495 (4) The test for "circular" in the Subject: header line has been removed
496 because it now seems ill-conceived.
498 15. Minor typos in src/EDITME comments corrected.
500 16. Installed latest exipick from John Jetmore.
502 17. If headers_add on a router specified a text string that was too long for
503 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
504 of string_sprintf() is now avoided.
506 18. $message_body_size was not set (it was always zero) when running the DATA
507 ACL and the local_scan() function.
509 19. For the "mail" command in an Exim filter, no default was being set for
510 the once_repeat time, causing a random time value to be used if "once" was
511 specified. (If the value happened to be <= 0, no repeat happened.) The
512 default is now 0s, meaning "never repeat". The "vacation" command was OK
513 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
514 (I found it when inspecting the code).
516 20. There is now an overall timeout for performing a callout verification. It
517 defaults to 4 times the callout timeout, which applies to individual SMTP
518 commands during the callout. The overall timeout applies when there is more
519 than one host that can be tried. The timeout is checked before trying the
520 next host. This prevents very long delays if there are a large number of
521 hosts and all are timing out (e.g. when the network connections are timing
522 out). The value of the overall timeout can be changed by specifying an
523 additional sub-option for "callout", called "maxwait". For example:
525 verify = sender/callout=5s,maxwait=20s
527 21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
528 to the end before writing, but this should make it even safer).
530 22. Exim was forgetting that it had advertised PIPELINING for the second and
531 subsequent messages on an SMTP connection. It was also not resetting its
532 memory on STARTTLS and an internal HELO.
534 23. When Exim logs an SMTP synchronization error within a session, it now
535 records whether PIPELINING has been advertised or not.
537 24. Added 3 instances of "(long int)" casts to time_t variables that were being
538 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
539 rather than long int.
541 25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
543 26. Added the never_mail option to autoreply.
549 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
550 crash if the getsockname() call failed; this can happen if a connection is
551 closed very soon after it is established. The problem was simply in the
552 order in which certain operations were done, causing Exim to try to write
553 to the SMTP stream before it had set up the file descriptor. The bug has
554 been fixed by making things happen in the correct order.
560 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
561 before the connection was closed, thus losing the rejection response.
563 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
564 some early Solaris releases, but causes trouble in current releases where
565 socklen_t is defined.
567 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
570 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
573 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
574 that releasing the top of it at the end releases what was used for sub-
575 expansions (unless the block got too big). However, discard this block if
576 the first thing is a variable or header, so that we can use its block when
577 it is dynamic (useful for very large $message_headers, for example).
579 6. Lookups now cache *every* query, not just the most recent. A new, separate
580 store pool is used for this. It can be recovered when all lookup caches are
581 flushed. Lookups now release memory at the end of their result strings.
582 This has involved some general refactoring of the lookup sources.
584 7. Some code has been added to the store_xxx() functions to reduce the amount
585 of flapping under certain conditions.
587 8. log_incoming_interface used to affect only the <= reception log lines. Now
588 it causes the local interface and port to be added to several more SMTP log
589 lines, for example "SMTP connection from", and rejection lines.
591 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
593 10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
595 11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
596 could be overwritten at the end of the current message (or the start of a
597 new message if it was set in a HELO ACL). The value is now preserved for
598 the duration of the SMTP connection.
600 12. If a transport had a headers_rewrite setting, and a matching header line
601 contained an unqualified address, that address was qualified, even if it
602 did not match any rewriting rules. The underlying bug was that the values
603 of the flags that permit the existence of unqualified sender and recipient
604 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
605 non-local messages, and by -bnq for local messages) were not being
606 preserved with the message after it was received.
608 13. When Exim was logging an SMTP synchronization error, it could sometimes log
609 "next input=" as part of the text comprising the host identity instead of
610 the correct text. The code was using the same buffer for two different
611 strings. However, depending on which order the printing function evaluated
612 its arguments, the bug did not always show up. Under Linux, for example, my
613 test suite worked just fine.
615 14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
616 doesn't work with some older versions of Perl. It has been changed to "my",
617 which in any case is probably the better facility to use.
619 15. A really picky compiler found some instances of statements for creating
620 error messages that either had too many or two few arguments for the format
623 16. The size of the buffer for calls to the DNS resolver has been increased
624 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
625 for addresses that have a lot of PTR records. This alleviates a problem; it
626 does not fully solve it.
628 17. A dnsdb lookup for PTR records that receives more data than will fit in the
629 buffer now truncates the list and logs the incident, which is the same
630 action as happens when Exim is looking up a host name and its aliases.
631 Previously in this situation something unpredictable would happen;
632 sometimes it was "internal error: store_reset failed".
634 18. If a server dropped the connection unexpectedly when an Exim client was
635 using GnuTLS and trying to read a response, the client delivery process
636 crashed while trying to generate an error log message.
638 19. If a "warn" verb in an ACL added multiple headers to a message in a single
641 warn message = H1: something\nH2: something
643 the text was added as a single header line from Exim's point of view
644 though it ended up OK in the delivered message. However, searching for the
645 second and subsequent header lines using $h_h2: did not work. This has been
646 fixed. Similarly, if a system filter added multiple headers in this way,
647 the routers could not see them.
649 20. Expanded the error message when iplsearch is called with an invalid key to
650 suggest using net-iplsearch in a host list.
652 21. When running tests using -bh, any delays imposed by "delay" modifiers in
653 ACLs are no longer actually imposed (and a message to that effect is
656 22. If a "gecos" field in a passwd entry contained escaped characters, in
657 particular, if it contained a \" sequence, Exim got it wrong when building
658 a From: or a Sender: header from that name. A second bug also caused
659 incorrect handling when an unquoted " was present following a character
662 23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
663 was not being matched caselessly.
665 24. Arranged for all hyphens in the exim.8 source to be escaped with
668 25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
669 properly. Recipient callout cache records were still being keyed to include
670 the sender, even when use_sender was set false. This led to far more
671 callouts that were necessary. The sender is no longer included in the key
672 when use_sender is false.
674 26. Added "control = submission" modifier to ACLs.
676 27. Added the ${base62d: operator to decode base 62 numbers.
678 28. dnsdb lookups can now access SRV records.
680 29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
681 the configuration file.
683 30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
684 (-v) mode. This makes the output for a verbose queue run more intelligible.
686 31. Added a use_postmaster feature to recipient callouts.
688 32. Added the $body_zerocount variable, containing the number of binary zero
689 bytes in the message body.
691 33. The time of last modification of the "new" subdirectory is now used as the
692 "mailbox time last read" when there is a quota error for a maildir
695 34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
697 35. Added +ignore_unknown as a special item in host lists.
699 36. Code for decoding IPv6 addresses in host lists is now included, even if
700 IPv6 support is not being compiled. This fixes a bug in which an IPv6
701 address was recognized as an IP address, but was then not correctly decoded
702 into binary, causing unexpected and incorrect effects when compared with
709 1. Very minor rewording of debugging text in manualroute to say "list of
710 hosts" instead of "hostlist".
712 2. If verify=header_syntax was set, and a header line with an unqualified
713 address (no domain) and a large number of spaces between the end of the
714 name and the colon was received, the reception process suffered a buffer
715 overflow, and (when I tested it) crashed. This was caused by some obsolete
716 code that should have been removed. The fix is to remove it!
718 3. When running in the test harness, delay a bit after writing a bounce
719 message to get a bit more predictability in the log output.
721 4. Added a call to search_tidyup() just before forking a reception process. In
722 theory, someone could use a lookup in the expansion of smtp_accept_max_
723 per_host which, without the tidyup, could leave open a database connection.
725 5. Added the variables $recipient_data and $sender_data which get set from a
726 lookup success in an ACL "recipients" or "senders" condition, or a router
727 "senders" option, similar to $domain_data and $local_part_data.
729 6. Moved the writing of debug_print from before to after the "senders" test
732 7. Change 4.31/66 (moving the time when the Received: is generated) caused
733 problems for message scanning, either using a data ACL, or using
734 local_scan() because the Received: header was not generated till after they
735 were called (in order to set the time as the time of reception completion).
736 I have revised the way this works. The header is now generated after the
737 body is received, but before the ACL or local_scan() are called. After they
738 are run, the timestamp in the header is updated.
744 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
745 before starting a queue runner without re-exec. This happened only when
746 deliver_drop_privilege was set or when the Exim user was set to root. The
747 effect of the bug was that timeouts during subsequent deliveries caused
748 crashes instead of being properly handled. The handler is now left at its
749 default (and expected) setting.
751 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
752 message, again when deliver_drop_privilege is set or Exim is run as root.
753 The bug described in (1) was not present in this case, but the tidying up
754 of the other signals was missing. I have made the two cases consistent.
756 3. The ignore_target_hosts setting on a manualroute router was being ignored
757 for hosts that were looked up using the /MX notation.
759 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
762 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
763 operated on the sender address. After changing the $sender_address to <>
764 for the sender address verify, Exim was re-instated it as the original
765 (before rewriting) address, but remembering that it had rewritten it, so it
766 wasn't rewriting it again. This bug also had the effect of breaking the
767 sender address verification caching when the sender address was rewritten.
769 6. The ignore_target_hosts option was being ignored by the ipliteral router.
770 This has been changed so that if the ip literal address matches
771 ignore_target_hosts, the router declines.
773 7. Added expansion conditions match_domain, match_address, and match_local_
774 part (NOT match_host).
776 8. The placeholder for the Received: header didn't have a length field set.
778 9. Added code to Exim itself and to exim_lock to test for a specific race
779 condition that could lead to file corruption when using MBX delivery. The
780 issue is with the lockfile that is created in /tmp. If this file is removed
781 after a process has opened it but before that process has acquired a lock,
782 there is the potential for a second process to recreate the file and also
783 acquire a lock. This could lead to two Exim processes writing to the file
784 at the same time. The added code performs the same test as UW imapd; it
785 checks after acquiring the lock that its file descriptor still refers to
788 10. The buffer for building added header lines was of fixed size, 8192 bytes.
789 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
792 11. Added the smtp_active_hostname option. If used, this will typically be made
793 to depend on the incoming interface address. Because $interface_address is
794 not set up until the daemon has forked a reception process, error responses
795 that can happen earlier (such as "too many connections") no longer contain
798 12. If an expansion in a condition on a "warn" statement fails because a lookup
799 defers, the "warn" statement is abandoned, and the next ACL statement is
800 processed. Previously this caused the whole ACL to be aborted.
802 13. Added the iplsearch lookup type.
804 14. Added ident_timeout as a log selector.
806 15. Added tls_certificate_verified as a log selector.
808 16. Added a global option tls_require_ciphers (compare the smtp transport
809 option of the same name). This controls incoming TLS connections.
811 17. I finally figured out how to make tls_require_ciphers do a similar thing
812 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
813 before starting the TLS session.
815 18. Tabs are now shown as \t in -bP output.
817 19. If the log selector return_path_on_delivery was set, Exim crashed when
818 bouncing a message because it had too many Received: header lines.
820 20. If two routers both had headers_remove settings, and the first one included
821 a superfluous trailing colon, the final name in the first list and the
822 first name in the second list were incorrectly joined into one item (with a
823 colon in the middle).
829 1. Added -C and -D options to the exinext utility, mainly to make it easier
830 to include in the automated testing, but these could be helpful when
831 multiple configurations are in use.
833 2. The exinext utility was not formatting the output nicely when there was
834 an alternate port involved in the retry record key, nor when there was a
835 message id as well (for retries that were specific to a specific message
836 and a specific host). It was also confused by IPv6 addresses, because of
837 the additional colons they contain. I have fixed the IPv4 problem, and
838 patched it up to do a reasonable job for IPv6.
840 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
841 delivery, the log line now contains "pipelined" if PIPELINING was used.
843 4. An SMTP transport process used to panic and die if the bind() call to set
844 an explicit outgoing interface failed. This has been changed; it is now
845 treated in the same way as a connect() failure.
847 5. A reference to $sender_host_name in the part of a conditional expansion
848 that was being skipped was still causing a DNS lookup. This no longer
851 6. The def: expansion condition was not recognizing references to header lines
852 that used bh_ and bheader_.
854 7. Added the _cache feature to named lists.
856 8. The code for checking quota_filecount in the appendfile transport was
857 allowing one more file than it should have been.
859 9. For compatibility with Sendmail, the command line option
867 and sets the incoming protocol and host name (for trusted callers). The
868 host name and its colon can be omitted when only the protocol is to be set.
869 Note the Exim already has two private options, -pd and -ps, that refer to
870 embedded Perl. It is therefore impossible to set a protocol value of "d" or
871 "s", but I don't think that's a major issue.
873 10. A number of refactoring changes to the code, none of which should affect
876 (a) The number of logging options was getting close to filling up the
877 32-bit word that was used as a bit map. I have split them into two classes:
878 those that are passed in the argument to log_write(), and those that are
879 only ever tested independently outside of that function. These are now in
880 separate 32-bit words, so there is plenty of room for expansion again.
881 There is no change in the user interface or the logging behaviour.
883 (b) When building, for example, log lines, the code previously used a
884 macro that called string_cat() twice, in order to add two strings. This is
885 not really sufficiently general. Furthermore, there was one instance where
886 it was actually wrong because one of the argument was used twice, and in
887 one call a function was used. (As it happened, calling the function twice
888 did not affect the overall behaviour.) The macro has been replaced by a
889 function that can join an arbitrary number of extra strings onto a growing
892 (c) The code for expansion conditions now uses a table and a binary chop
893 instead of a serial search (which was left over from when there were very
894 few conditions). Also, it now recognizes conditions like "pam" even when
895 the relevant support is not compiled in: a suitably worded error message is
896 given if an attempt is made to use such a condition.
898 11. Added ${time_interval:xxxxx}.
900 12. A bug was causing one of the ddress fields not to be passed back correctly
901 from remote delivery subprocesses. The field in question was not being
902 subsequently used, so this caused to problems in practice.
904 13. Added new log selectors queue_time and deliver_time.
906 14. Might have fixed a bug in maildirsizefile handling that threw up
907 "unexpected character" debug warnings, and recalculated the data
908 unnecessarily. In any case, I expanded the warning message to give more
911 15. Added the message "Restricted characters in address" to the statements in
912 the default ACL that block characters like @ and % in local parts.
914 16. Change 71 for release 4.31 proved to be much less benign that I imagined.
915 Three changes have been made:
917 (a) There was a serious bug; a negative response to MAIL caused the whole
918 recipient domain to be cached as invalid, thereby blocking all messages
919 to all local parts at the same domain, from all senders. This bug has
920 been fixed. The domain is no longer cached after a negative response to
921 MAIL if the sender used is not empty.
923 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
926 (c) A new callout option, "use_sender" has been added for people who want
927 the modified behaviour.
933 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
936 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
937 indeed breaks things for older releases.
939 3. Added additional logging to the case where there is a problem reading data
940 from a filter that is running in a subprocess using a pipe, in order to
941 try to track down a specific problem.
943 4. Testing facility fudge: when running in the test harness and attempting
944 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
945 getting "No route to host". Convert this to a timeout.
947 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
950 6. Some OS don't have socklen_t but use size_t instead. This affects the
951 fifth argument of getsockopt() amongst other things. This is now
952 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
953 can be set for individual OS. I have set it for SunOS5, OSF1, and
954 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
955 some earlier ones do not.
957 7. Change 4.30/15 was not doing the test caselessly.
959 8. The standard form for an IPv6 address literal was being rejected by address
960 parsing in, for example, MAIL and RCPT commands. An example of this kind of
961 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
962 this, as well as the form without the "IPv6" on the front (but only when
963 address literals are enabled, of course).
965 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
967 10. Exim crashed if a message with an empty sender address specified by -f
968 encountered a router with an errors_to setting. This could be provoked only
973 where an empty string was supplied; "<>" did not hit this bug.
975 11. Installed PCRE release 4.5.
977 12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
978 remained set. It is now erased.
980 13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
981 times from message ids (which are base 36 rather than the normal 62).
983 14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
984 were being counted as actual protocol errors, and logged if the log
985 selector +smtp_protocol_error was set. One cannot be perfect in this test,
986 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
987 and DATA following a set of rejected RCPTs do not count as protocol errors.
988 In other words, Exim assumes they were pipelined, though this may not
989 actually be the case. Of course, in all cases the client gets an
990 appropriate error code.
992 15. If a lookup fails in an ACL condition, a message about the failure may
993 be available; it is used if testing the ACL cannot continue, because most
994 such messages specify what the cause of the deferral is. However, some
995 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
996 that caused an old message to be retained and used if a later statement
997 caused a defer, replacing the real cause of the deferral.
999 16. If an IP address had so many PTR records that the DNS lookup buffer
1000 was not large enough to hold them, Exim could crash while trying to process
1001 the truncated data. It now detects and logs this case.
1003 17. Further to 4.21/58, another change has been made: if (and only if) the
1004 first line of a message (the first header line) ends with CRLF, a bare LF
1005 in a subsequent header line has a space inserted after it, so as not to
1006 terminate the header.
1008 18. Refactoring: tidied an ugly bit of code in appendfile that copied data
1009 unnecessarily, used atoi() instead of strtol(), and didn't check the
1010 termination when getting file sizes from file names by regex.
1012 19. Completely re-implemented the support for maildirsize files, in the light
1013 of a number of problems with the previous contributed implementation
1014 (4.30/29). In particular:
1016 . If the quota is zero, the maildirsize file is maintained, but no quota is
1019 . If the maildir directory does not exist, it is created before any attempt
1020 to write a maildirsize file.
1022 . The quota value in the file is just a cache; if the quota is changed in
1023 the transport, the new value overrides.
1025 . A regular expression is available for excluding directories from the
1028 20. The autoreply transport checks the characters in options that define the
1029 message's headers; it allows continued headers, but it was checking with
1030 isspace() after an embedded newline instead of explicitly looking for a
1033 21. If all the "regular" hosts to which an address was routed had passed their
1034 expiry times, and had not reached their retry times, the address was
1035 bounced, even if fallback hosts were defined. Now Exim should go on to try
1038 22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1039 equivalent code in the SMTP transport. Some hosts send humungous responses
1040 to HELO/EHLO, more than 1024 it seems.
1042 23. Refactoring: code in filter.c used (void *) for "any old type" but this
1043 gives compiler warnings in some environments. I've now done it "properly",
1046 24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1047 (because of problems with the built-in one) was declared to return uschar *
1048 instead of char *, causing compiler failure.
1050 25. Fixed a file descriptor leak when processing alias/forward files.
1052 26. Fixed a minor format string issue in dbfn.c.
1054 27. Typo in exim.c: ("dmbnz" for "dbmnz").
1056 28. If a filter file refered to $h_xxx or $message_headers, and the headers
1057 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1060 29. When a sender address is verified, it is cached, to save repeating the test
1061 when there is more than one recipient in a message. However, when the
1062 verification involves a callout, it is possible for different callout
1063 options to be set for different recipients. It is too complicated to keep
1064 track of this in the cache, so now Exim always runs a verification when a
1065 callout is required, relying on the callout cache for the optimization.
1066 The overhead is duplication of the address routing, but this should not be
1069 30. Fixed a bug in callout caching. If a RCPT command caused the sender address
1070 to be verified with callout=postmaster, and the main callout worked but the
1071 postmaster check failed, the verification correctly failed. However, if a
1072 subsequent RCPT command asked for sender verification *without* the
1073 postmaster check, incorrect caching caused this verification also to fail,
1076 31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
1077 it was not caching the DNS options (qualify_single, search_parents) that
1078 were used when the lookup failed. A subsequent lookup with different
1079 options therefore always gave the same answer, though there were cases
1080 where it should not have. (Example: a "domains = !$mx_any" option on a
1081 dnslookup router: the "domains" option is always processed without any
1082 widening, but the router might have qualify_single set.) Now Exim uses the
1083 cached value only when the same options are set.
1085 32. Added John Jetmore's "exipick" utility to the distribution.
1087 33. GnuTLS: When an attempt to start a TLS session fails for any reason other
1088 than a timeout (e.g. a certificate is required, and is not provided), an
1089 Exim server now closes the connection immediately. Previously it waited for
1090 the client to close - but if the client is SSL, it seems that they each
1091 wait for each other, leading to a delay before one of them times out.
1093 34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
1094 maintained 0.8.x compatibility because I don't think many are using it, and
1095 it is clearly obsolete.
1097 35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
1100 36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
1101 client certificate was expired. A simple patch fixes this, though I don't
1102 understand the full logic of why the verify callback is called multiple
1105 37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
1106 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
1107 which causes problems with some clients (such as the Certicom SSL Plus
1108 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
1109 disables the coutermeasure allowing Eudora to connect."
1111 38. Exim was not checking that a write() to a log file succeeded. This could
1112 lead to Bad Things if a log got too big, in particular if it hit a file
1113 size limit. Exim now panics and dies if it cannot write to a log file, just
1114 as it does if it cannot open a log file.
1116 39. Modified OS/Makefile-Linux so that it now contains
1118 CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
1120 The two -D definitions ensure that Exim is compiled with large file
1121 support, which makes it possible to handle log files that are bigger than
1124 40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
1125 instance) a domain was checked against a named list that involved a lookup,
1126 causing $domain_data to be set, then another domain was checked against the
1127 same list, then the first domain was re-checked, the value of $domain_data
1128 after the final check could be wrong. In particular, if the second check
1129 failed, it could be set empty. This bug probably also applied to
1132 41. The strip_trailing_dot option was not being applied to the address given
1133 with the -f command-line option.
1135 42. The code for reading a message's header from the spool was incrementing
1136 $received_count, but never initializing it. This meant that the value was
1137 incorrect (doubled) while delivering a message in the same process in which
1138 it was received. In the most common configuration of Exim, this never
1139 happens - a fresh exec is done - but it can happen when
1140 deliver_drop_privilege is set.
1142 43. When Exim logs an SMTP synchronization error - client data sent too soon -
1143 it now includes up to 150 characters of the unexpected data in the log
1146 44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
1147 and building data strings. The size of both of these buffers was 10 000
1148 bytes - far larger than anybody would *ever* want, thought I. Needless to
1149 say, somebody hit the limit. I have increased the maximum line length to
1150 20 000 and the maximum data length of concatenated lines to 100 000. I have
1151 also fixed two bugs, because there was no checking on these buffers. Tsk,
1152 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
1153 buffer is too small.
1155 45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
1156 lsearch lookups. Now it does.
1158 46. When parsing a route_list item in a manualroute router, a fixed-length
1159 buffer was used for the list of hosts. I made this 1024 bytes long,
1160 thinking that nobody would ever have a list of hosts that long. Wrong.
1161 Somebody had a whole pile of complicated expansion conditions, and the
1162 string was silently truncated, leading to an expansion error. It turns out
1163 that it is easier to change to an unlimited length (owing to other changes
1164 that have happened since this code was originally written) than to build
1165 structure for giving a limitation error. The length of the item that
1166 expands into the list of hosts is now unlimited.
1168 47. The lsearch lookup could not handle data where the length of text line was
1169 more than 4095 characters. Such lines were truncated, leading to shortened
1170 data being returned. It should now handle lines of any length.
1172 48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
1173 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
1176 49. Cosmetic tidy to scripts like exicyclog that are generated by globally
1177 replacing strings such as BIN_DIRECTORY in a source file: the replacement
1178 no longer happens in comment lines. A list of replacements is now placed
1179 at the head of all of the source files, except those whose only change is
1180 to replace PERL_COMMAND in the very first #! line.
1182 50. Replaced the slow insertion sort in queue.c, for sorting the list of
1183 messages on the queue, with a bottom-up merge sort, using code contributed
1184 by Michael Haardt. This should make operations like -bp somewhat faster on
1185 large queues. It won't affect queue runners, except when queue_run_in_order
1188 51. Installed eximstats 1.31 in the distribution.
1190 52. Added support for SRV lookups to the dnslookup router.
1192 53. If an ACL referred to $message_body or $message_body_end, the value was not
1193 reset for any messages that followed in the same SMTP session.
1195 54. The store-handling optimization for building very long strings was not
1196 differentiating between the different store pools. I don't think this
1197 actually made any difference in practice, but I've tidied it.
1199 55. While running the routers to verify a sender address, $sender_address
1200 was still set to the sender address. This is wrong, because when routing to
1201 send a bounce to the sender, it would be empty. Therefore, I have changed
1202 it so that, while verifying a sender address, $sender_address is set to <>.
1203 (There is no change to what happens when verifying a recipient address.)
1205 56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
1206 target A or AAAA records (if not already returned) without resetting the
1207 qualify_single or search_parents options of the DNS resolver. These are
1208 inappropriate in this case because the targets of MX and SRV records must
1209 be FQDNs. A broken DNS record could cause trouble if it happened to have a
1210 target that, when qualified, matched something in the local domain. These
1211 two options are now turned off when doing these lookups.
1213 57. It seems that at least some releases of Reiserfs (which does not have the
1214 concept of a fixed number of inodes) returns zero and not -1 for the
1215 number of available inodes. This interacted badly with check_spool_inodes,
1216 which assumed that -1 was the "no such thing" setting. What I have done is
1217 to check that the total number of inodes is greater than zero before doing
1218 the test of how many are available.
1220 58. When a "warn" ACL statement has a log_message modifier, the message is
1221 remembered, and not repeated. This is to avoid a lot of repetition when a
1222 message has many recipients that cause the same warning to be written.
1223 Howewer, Exim was preserving the list of already written lines for an
1224 entire SMTP session, which doesn't seem right. The memory is now reset if a
1225 new message is started.
1227 59. The "rewrite" debugging flag was not showing the result of rewriting in the
1228 debugging output unless log_rewrite was also set.
1230 60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
1231 of (int)(handle) when we know that handle contains (void *)(-1).
1233 61. The Exim daemon panic-logs an error return when it closes the incoming
1234 connection. However "connection reset by peer" seems to be common, and
1235 isn't really an error worthy of noting specially, so that particular error
1238 62. When Exim is trying to find all the local interfaces, it used to panic and
1239 die if the ioctl to get the interface flags failed. However, it seems that
1240 on at least one OS (Solaris 9) it is possible to have an interface that is
1241 included in the list of interfaces, but for which you get a failure error
1242 for this call. This happens when the interface is not "plumbed" into a
1243 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
1244 failure of the "get flags" call assumes that the interface is down.
1246 63. Added a ${eval10: operator, which assumes all numbers are decimal. This
1247 makes life easier for people who are doing arithmetic on fields extracted
1248 from dates, where you often get leading zeros that should not be
1249 interpreted as octal.
1251 64. Added qualify_domain to the redirect router, to override the global
1254 65. If a pathologically long header line contained very many addresses (the
1255 report of this problem mentioned 10 000) and each of them was rewritten,
1256 Exim could use up a very large amount of memory. (It kept on making new
1257 copies of the header line as it rewrote, and never released the old ones.)
1258 At the expense of a bit more processing, the header rewriting function has
1259 been changed so that it no longer eats memory in this way.
1261 66. The generation of the Received: header has been moved from the time that a
1262 message starts to be received, to the time that it finishes. The timestamp
1263 in the Received: header should now be very close to that of the <= log
1264 line. There are two side-effects of this change:
1266 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
1267 logged header lines no longer include the local Received: line, because
1268 it has not yet been created. The same applies to a copy of the message
1269 that is returned to a non-SMTP sender when a message is rejected.
1271 (b) When a filter file is tested using -bf, no additional Received: header
1272 is added to the test message. After some thought, I decided that this
1275 This change does not affect the value of $received_for. It is still set
1276 after address rewriting, but before local_scan() is called.
1278 67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
1280 68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
1281 gave an unhelpful panic error message, and a defer error. I have managed to
1282 change this behaviour so that it now rejects any supplied certificate,
1283 which seems right, as the list of acceptable certificates is empty.
1285 69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
1286 gave an unhelpful defer error. I have not managed to make this reject any
1287 supplied certificates, but the error message it gives is "no certificate
1288 supplied", which is not helpful.
1290 70. exigrep's output now also includes lines that are not associated with any
1291 message, but which match the given pattern. Implemented by a patch from
1292 Martin Sluka, which also tidied up the Perl a bit.
1294 71. Recipient callout verification, like sender verification, was using <> in
1295 the MAIL FROM command. This isn't really the right thing, since the actual
1296 sender may affect whether the remote host accepts the recipient or not. I
1297 have changed it to use the actual sender in the callout; this means that
1298 the cache record is now keyed on a recipient/sender pair, not just the
1299 recipient address. There doesn't seem to be a real danger of callout loops,
1300 since a callout by the remote host to check the sender would use <>.
1301 [SEE ABOVE: changed after hitting problems.]
1303 72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
1304 temporary errors. However, in the case of such a code being given after
1305 the end of a data transmission (i.e. after ".") Exim was failing to write
1306 a retry record for the message. (Yes, there was some broken host that was
1307 actually sending 8xx at this point.)
1309 73. An unknown lookup type in a host list could cause Exim to panic-die when
1310 the list was checked. (An example that provoked this was putting <; in the
1311 middle of a list instead of at the start.) If this happened during a DATA
1312 ACL check, a -D file could be left lying around. This kind of configuration
1313 error no longer causes Exim to die; instead it causes a defer errror. The
1314 incident is still logged to the main and panic logs.
1316 74. Buglet left over from Exim 3 conversion. The message "too many messages
1317 in one connection" was written to the rejectlog but not the mainlog, except
1318 when address rewriting (yes!) was being logged.
1320 75. Added write_rejectlog option.
1322 76. When a system filter was run not as root (that is, when system_filter_user
1323 was set), the values of the $n variables were not being returned to the
1324 main process; thus, they were not subsequently available in the $sn
1327 77. Added +return_path_on_delivery log selector.
1329 78. A connection timeout was being treated differently from recipients deferred
1330 when testing hosts_max_try with a message that was older than the host's
1331 retry timeout. (The host should not be counted, thus allowing all hosts to
1332 be tried at least once before bouncing.) This may have been the cause of an
1333 occasionally reported bug whereby a message would remain on the queue
1334 longer than the retry timeout, but would be bounced if a delivery was
1335 forced. I say "may" because I never totally pinned down the problem;
1336 setting up timeout/retry tests is difficult. See also the next item.
1338 79. The ultimate address timeout was not being applied to errors that involved
1339 a combination of host plus message (for example, a timeout on a MAIL
1340 command). When an address resolved to a number of possible hosts, and they
1341 were not all tried for each delivery (e.g. because of hosts_max_try), a
1342 message could remain on the queue longer than the retry timeout.
1344 80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
1347 81. Fixed an obscure SMTP outgoing bug which required at least the following
1348 conditions: (a) there was another message waiting for the same server;
1349 (b) the server returned 5xx to all RCPT commands in the first message so
1350 that the message was not completed; (c) the server dropped the connection
1351 or gave a negative response to the RSET that Exim sends to abort the
1352 transaction. The observed case was a dropped connection after DATA that had
1353 been sent in pipelining mode. That is, the server had advertised PIPELINING
1354 but was not implementing it correctly. The effect of the bug was incorrect
1355 behaviour, such as trying another host, and this could lead to a crash.
1361 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
1362 and daemon.c were passed as pointers to ints; they should have been
1363 pointers to socklen_t variables (which are typically unsigned ints).
1365 2. Some signed/unsigned type warnings in the os.c file for Linux have been
1368 3. Fixed a really odd bug that affected only the testing scheme; patching a
1369 certain fixed string in the binary changed the value of another string that
1370 happened to be identical to the end of the original first string.
1372 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
1373 name", it returns that address as the IP address. On some operating
1374 systems (e.g. Solaris), it also passes back the IP address string as the
1375 "host name". However, on others (e.g. Linux), it passes back an empty
1376 string. Exim wasn't checking for this, and was changing the host name to an
1377 empty string, assuming it had been canonicized.
1379 5. Although rare, it is permitted to have more than one PTR record for a given
1380 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
1381 all the names associated with an address, because they do in Solaris.
1382 However, it seems that they do not in Linux for data that comes from the
1383 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
1384 I found this out when I moved to a new Linux workstation and tried to run
1385 the Exim test suite.
1387 To get round this problem I have changed the code so that it now does its
1388 own call to the DNS to look up PTR records when searching for a host name.
1389 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
1390 addresses that are only in /etc/hosts are still found.
1392 This behaviour is, however, controlled by an option called host_lookup_
1393 order, which defaults to "bydns:byaddr". If people want to use the other
1394 order, or indeed, just use one or the other means of lookup, they can
1395 specify it in this variable.
1397 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
1398 some operating systems, this comes back from gethostbyaddr() as an empty
1399 string, and this is what Exim used to test for. However, it seems that in
1400 other systems, "." is yielded. Exim now tests for this case too.
1402 7. The values of check_spool_space and check_log_space are now held internally
1403 as a number of kilobytes instead of an absolute number of bytes. If a
1404 numbers is specified without 'K' or 'M', it is rounded up to the nearest
1405 kilobyte. This means that much larger values can be stored.
1407 8. Exim monitor: an attempt to get the action menu when not actually pointing
1408 at a message produces an empty menu entitled "No message selected". This
1409 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
1410 no entries in it ("Shell widget menu has zero width and/or height"). So I
1411 have added a single, blank menu entry in this case.
1413 9. Added ${quote_local_part.
1415 10. MIME decoding is now applied to the contents of Subject: header lines when
1418 11. Now that a reference to $sender_host_address automatically causes a reverse
1419 lookup to occur if necessary (4.13/18), there is no need to arrange for a
1420 host lookup before query-style lookups in lists that might use this
1421 variable. This has therefore been abolished, and the "net-" prefix is no
1422 longer necessary for query-style lookups.
1424 12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
1425 have been a typo for LFLAGS, so it has been changed.
1427 13. The install script calls Exim with "-C /dev/null" in order to find the
1428 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
1429 to be output. Howeve, since Exim outputs its version number before the
1430 error, it didn't break the script. It just looked ugly. I fixed this by
1431 always allowing "-C /dev/null" if the caller is root.
1433 14. Ignore overlarge ACL variable number when reading spool file - insurance
1434 against a later release with more variables having written the file.
1436 15. The standard form for an IPv6 address literal was being rejected by EHLO.
1437 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1438 this, as well as the form without the "IPv6" on the front.
1440 16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
1441 OS/Makefile-Darwin file.
1443 17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
1444 only to LDAP libraries that do not have LDAP_OPT_DEREF.
1446 18. After change 4.21/52, "%ld" was used to format the contents of the $inode
1447 variable. However, some OS use ints for inodes. I've added cast to long int
1448 to get rid of the compiler warning.
1450 19. I had forgotten to lock out "/../" in configuration file names when
1451 ALT_CONFIG_PREFIX was set.
1453 20. Routers used for verification do not need to specify transports. However,
1454 if such a router generated a host list, and callout was configured, Exim
1455 crashed, because it could not find a port number from the (non-existent)
1456 transport. It now assumes port 25 in this circumstance.
1458 21. Added the -t option to exigrep.
1460 22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
1461 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
1462 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
1463 them is set, LOOKUP_LSEARCH is forced.
1465 23. "exim -bV" now outputs a list of lookups that are included in the binary.
1467 24. Added sender and host information to the "rejected by local_scan()" log
1468 line; previously there was no indication of these.
1470 25. Added .include_if_exists.
1472 26. Change 3.952/11 added an explicit directory sync on top of a file sync for
1473 Linux. It turns out that not all file systems support this. Apparently some
1474 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
1475 do it.) To cope with this, the error EINVAL, which means that sync-ing is
1476 not supported on the file descriptor, is now ignored when Exim is trying to
1477 sync a directory. This applies only to Linux.
1479 27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
1481 28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
1482 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
1485 29. Added support for maildirsize files from supplied patch (modified a bit).
1487 30. The use of :fail: followed by an empty string could lead Exim to respond to
1488 sender verification failures with (e.g.):
1490 550 Verification failed for <xxx>
1491 550 Sender verify failed
1493 where the first response line was missing the '-' that indicates it is not
1494 the final line of the response.
1496 31. The loop for finding the name of the user that called Exim had a hardwired
1497 limit of 10; it now uses the value of finduser_retries, which is used for
1498 all other user lookups.
1500 32. Added $received_count variable, available in data and not_smtp ACLs, and at
1503 33. Exim was neglecting to zero errno before one call of strtol() when
1504 expanding a string and expecting an integer value. On some systems this
1505 resulted in spurious "integer overflow" errors. Also, it was casting the
1506 result into an int without checking.
1508 34. Testing for a connection timeout using "timeout_connect" in the retry rules
1509 did not work. The code looks as if it has *never* worked, though it appears
1510 to have been documented since at least releast 1.62. I have made it work.
1512 35. The "timeout_DNS" error in retry rules, also documented since at least
1513 1.62, also never worked. As it isn't clear exactly what this means, and
1514 clearly it isn't a major issue, I have abolished the feature by treating it
1515 as "timeout", and writing a warning to the main and panic logs.
1517 36. The display of retry rules for -brt wasn't always showing the error code
1520 37. Added new error conditions to retry rules: timeout_A, timeout_MX,
1521 timeout_connect_A, timeout_connect_MX.
1523 38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
1524 to the empty sender.
1526 39. The daemon was not analysing the content of -oX till after it had closed
1527 stderr and disconnected from the controlling terminal. This meant that any
1528 syntax errors were only noted on the panic log, and the return code from
1529 the command was 0. By re-arranging the code a little, I've made the
1530 decoding happen first, so such errors now appear on stderr, and the return
1531 code is 1. However, the actual setting up of the sockets still happens in
1532 the disconnected process, so errors there are still only recorded on the
1535 40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
1536 connections (as happens on some IP stacks) was logged at start up time as
1537 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
1538 it from "IPv6 and IPv4", which means that two separate sockets are being
1541 41. The debug output for gethostbyname2() or getipnodebyname() failures now
1542 says whether AF_INET or AF_INET6 was passed as an argument.
1544 42. Exiwhat output was messed up when time zones were included in log
1547 43. Exiwhat now gives more information about the daemon's listening ports,
1548 and whether -tls-on-connect was used.
1550 44. The "port" option of the smtp transport is now expanded.
1552 45. A "message" modifier in a "warn" statement in a non-message ACL was being
1553 silently ignored. Now an error message is written to the main and panic
1556 46. There's a new ACL modifier called "logwrite" which writes to a log file
1557 as soon as it is encountered.
1559 47. Added $local_user_uid and $local_user_gid at routing time.
1561 48. Exim crashed when trying to verify a sender address that was being
1564 49. Exim was recognizing only a space character after ".include". It now also
1565 recognizes a tab character.
1567 50. Fixed several bugs in the Perl script that creates the exim.8 man page by
1568 extracting the relevant information from the specification. The man page no
1569 longer contains scrambled data for the -d option, and I've added a section
1570 at the front about calling Exim under different names.
1572 51. Added "extra_headers" argument to the "mail" command in filter files.
1574 52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
1577 53. Installed eximstats 1.29.
1579 54. Added transport_filter_timeout as a generic transport option.
1581 55. Exim no longer adds an empty Bcc: header to messages that have no To: or
1582 Cc: header lines. This was required by RFC 822, but it not required by RFC
1585 56. Exim used to add From:, Date:, and Message-Id: header lines to any
1586 incoming messages that did not have them. Now it does so only if the
1587 message originates locally, that is, if there is no associated remote host
1588 address. When Resent- header lines are present, this applies to the Resent-
1589 lines rather than the non-Resent- lines.
1591 57. Drop incoming SMTP connection after too many syntax or protocol errors. The
1592 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
1594 58. Messages for configuration errors now include the name of the main
1595 configuration file - useful now that there may be more than one file in a
1596 list (.included file names were always shown).
1598 59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
1599 for those rare installations that do not start the daemon as root or run it
1600 setuid root. I've cut out the call to initgroups() if the daemon is not
1603 60. The Exim user and group can now be bound into the binary as text strings
1604 that are looked up at the start of Exim's processing.
1606 61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
1608 62. Added $mailstore_basename variable.
1610 63. Installed patch to sieve.c from Michael Haardt.
1612 64. When Exim failed to open the panic log after failing to open the main log,
1613 the original message it was trying to log was written to stderr and debug
1614 output, but if they were not available (the usual case in production), it
1615 was lost. Now it is written to syslog before the two lines that record the
1616 failures to open the logs.
1618 65. Users' Exim filters run in subprocesses under the user's uid. It is
1619 possible for a "deliver" command or an alias in a "personal" command to
1620 provoke an address rewrite. If logging of address rewriting is configured,
1621 this fails because the process is not running as root or exim. There may be
1622 a better way of dealing with this, but for the moment (because 4.30 needs
1623 to be released), I have disabled address rewrite logging when running a
1624 filter in a non-root, non-exim process.
1630 1. The buildconfig auxiliary program wasn't quoting the value set for
1631 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
1632 not defined. This bug was masked in 4.22 by the effect that was fixed in
1635 2. Some messages that were rejected after a message id was allocated were
1636 shown as "incomplete" by exigrep. It no longer does this for messages that
1637 are rejected by local_scan() or the DATA or non-SMTP ACLs.
1639 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
1640 have allow_domain_literals set, the ID did not get logged in the <= line.
1641 Domain literals are now always recognized in Message-ID: header lines.
1643 4. The first argument for a ${extract expansion item is the key name or field
1644 number. Leading and trailing spaces in this item were not being ignored,
1645 causing some misleading effects.
1647 5. When deliver_drop_privilege was set, single queue runner processes started
1648 manually (i.e. by the command "exim -q") or by the daemon (which uses the
1649 same command in the process it spins off) were not dropping privilege.
1651 6. When the daemon running as "exim" started a queue runner, it always
1652 re-executed Exim in the spun-off process. This is a waste of effort when
1653 deliver_drop_privilege is set. The new process now just calls the
1654 queue-runner function directly.
1660 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
1663 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
1664 ignored. Though the use of -oP was forcing the writing of a pid file, it
1665 was always written to the default place.
1667 3. If the message "no IP address found for host xxxx" is generated during
1668 incoming verification, it is now followed by identification of the incoming
1669 connection (so you can more easily find what provoked it).
1671 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
1673 5. Added some features to "harden" Exim a bit more against certain attacks:
1675 (a) There is now a build-time option called FIXED_NEVER_USERS that can
1676 be put in Local/Makefile. This is like the never_users runtime option,
1677 but it cannot be overridden. The default setting is "root".
1679 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
1680 prefix string with which any file named in a -C command line option
1683 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
1684 is retained for -C and -D only if the caller of Exim is root. Without
1685 it, the exim user may also use -C and -D and retain privilege.
1687 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
1688 command line option is disabled.
1690 6. Macro names set by the -D option must start with an upper case letter, just
1691 like macro names defined in the configuration file.
1693 7. Added "dereference=" facility to LDAP.
1695 8. Two instances of the typo "uknown" in the source files are fixed.
1697 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
1698 the Configure-Makefile script screwed up while processing it.
1700 10. Incorporated PCRE 4.4.
1702 11. The SMTP synchronization check was not operating right at the start of an
1703 SMTP session. For example, it could not catch a HELO sent before the client
1704 waited for the greeting. There is now a check for outstanding input at the
1705 point when the greeting is written. Because of the duplex, asynchronous
1706 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
1707 way, but not yet received, when the check is performed.
1709 12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
1710 on TCP/IP sockets, because this apparently causes some broken clients to
1713 13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
1714 unchanged) from the Cygwin maintainer.
1716 14. The code for -bV that shows what is in the binary showed "mbx" when maildir
1717 was supported instead of testing for mbx. Effectively a typo.
1719 15. The spa authenticator server code was not checking that the input it
1720 received was valid base64.
1722 16. The debug output line for the "set" modifier in ACLs was not showing the
1723 name of the variable that was being set.
1725 17. Code tidy: the variable type "vtype_string" was never used. Removed it.
1727 18. Previously, a reference to $sender_host_name did not cause a DNS reverse
1728 lookup on its own. Something else was needed to trigger the lookup. For
1729 example, a match in host_lookup or the need for a host name in a host list.
1730 Now, if $sender_host_name is referenced and the host name has not yet been
1731 looked up, a lookup is performed. If the lookup fails, the variable remains
1732 empty, and $host_lookup_failed is set to "1".
1734 19. Added "eqi" as a case-independent comparison operator.
1736 20. The saslauthd authentication condition could segfault if neither service
1737 nor realm was specified.
1739 21. If an overflowing value such as "2048M" was set for message_size_limit, the
1740 error message that was logged was misleading, and incoming SMTP
1741 connections were dropped. The message is now more accurate, and temporary
1742 errors are given to SMTP connections.
1744 22. In some error situations (such as 21 above) Exim rejects all SMTP commands
1745 (except RSET) with a 421 error, until QUIT is received. However, it was
1746 failing to send a response to QUIT.
1748 23. The HELO ACL was being run before the code for helo_try_verify_hosts,
1749 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
1750 ACL is now run after the helo_try_verify_hosts code.
1752 24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
1753 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
1754 case-independent, so other case variants are also recognized). Apparently
1755 some systems use these upper case variants.
1757 25. If more than two messages were waiting for the same host, and a transport
1758 filter was specified for the transport, Exim sent two messages over the
1759 same TCP/IP connection, and then failed with "socket operation on non-
1760 socket" when it tried to send the third.
1762 26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
1764 27. The extern definition of crypt16() in expand.c was not being excluded when
1765 the OS had its own crypt16() function.
1767 28. Added bounce_return_body as a new option, and bounce_return_size_limit
1768 as a preferred synonym for return_size_limit, both as an option and as an
1771 29. Added LIBS=-liconv to OS/Makefile-OSF1.
1773 30. Changed the default configuration ACL to relax the local part checking rule
1774 for addresses that are not in any local domains. For these addresses,
1775 slashes and pipe symbols are allowed within local parts, but the sequence
1776 /../ is explicitly forbidden.
1778 31. SPA server authentication was not clearing the challenge buffer before
1781 32. log_message in a "warn" ACL statement was writing to the reject log as
1782 well as to the main log, which contradicts the documentation and doesn't
1783 seem right (because no rejection is happening). So I have stopped it.
1785 33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
1786 However, I am unable to do any testing of this.
1788 34. Fixed an infelicity in the appendfile transport. When checking directories
1789 for a mailbox, to see if any needed to be created, it was accidentally
1790 using path names with one or more superfluous leading slashes; tracing
1791 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
1793 35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
1794 contents are added to the log line that is written for every discarded
1795 recipient. (Previously a log_message setting was ignored.)
1797 36. The ${quote: operator now quotes the string if it is empty.
1799 37. The install script runs exim in order to find its version number. If for
1800 some reason other than non-existence or emptiness, which it checks, it
1801 could not run './exim', it was installing it with an empty version number,
1802 i.e. as "exim-". This error state is now caught, and the installation is
1805 38. An argument was missing from the function that creates an error message
1806 when Exim fails to connect to the socket for saslauthd authentication.
1807 This could cause Exim to crash, or give a corrupted message.
1809 39. Added isip, isip4, and isip6 to ${if conditions.
1811 40. The ACL variables $acl_xx are now saved with the message, and can be
1812 accessed later in routers, transports, and filters.
1814 41. The new lookup type nwildlsearch is like wildlsearch, except that the key
1815 strings in the file are not string-expanded.
1817 42. If a MAIL command specified a SIZE value that was too large to fit into an
1818 int variable, the check against message_size_limit failed. Such values are
1819 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
1820 day this will have to be increased, but I don't think I want to be around
1821 when emails are that large.
1828 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
1829 iconv() is not standard in FreeBSD.
1831 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
1832 IPv6 enabled. The observed symptom was a segmentation fault on return from
1833 the function os_common_find_running_interfaces() in src/os.c.
1835 3. In the check_special_case() function in daemon.c I had used "errno" as an
1836 argument name, which causes warnings on some systems. This was basically a
1837 typo, since it was named "eno" in the comments!
1839 4. The code that waits for the clock to tick (at a resolution of some fraction
1840 of a second) so as to ensure message-id uniqueness was always waiting for
1841 at least one whole tick, when it could have waited for less. [This is
1842 almost certainly not relevant at current processor speeds, where it is
1843 unlikely to ever wait at all. But we try to future-proof.]
1845 5. The function that sleeps for a time interval that includes fractions of a
1846 second contained a race. It did not block SIGALRM between setting the
1847 timer, and suspending (a couple of lines later). If the interval was short
1848 and the sigsuspend() was delayed until after it had expired, the suspension
1849 never ended. On busy systems this could lead to processes getting stuck for
1852 6. Some uncommon configurations may cause a lookup to happen in a queue runner
1853 process, before it forks any delivery processes. The open lookup caching
1854 mechanism meant that the open file or database connection was passed into
1855 the delivery process. The problem was that delivery processes always tidy
1856 up cached lookup data. This could cause a problem for the next delivery
1857 process started by the queue runner, because the external queue runner
1858 process does not know about the closure. So the next delivery process
1859 still has data in the lookup cache. In the case of a file lookup, there was
1860 no problem because closing a file descriptor in a subprocess doesn't affect
1861 the parent. However, if the lookup was caching a connection to a database,
1862 the connection was closed, and the second delivery process was likely to
1863 see errors such as "PGSQL: query failed: server closed the connection
1864 unexpectedly". The problem has been fixed by closing all cached lookups
1865 in a queue runner before running a delivery process.
1867 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
1868 seem to have the "const" qualifier which it has on other OS. I've
1871 8. Change 4.21/2 was too strict. It is only if there are two authenticators
1872 *of the same type* (client or server) with the same public name that an
1873 error should be diagnosed.
1875 9. When Exim looked up a host name for an IP address, but failed to find the
1876 original IP address when looking up the host name (a safety check), it
1877 output the message "<ip address> does not match any IP for NULL", which was
1878 confusing, to say the least. The bug was that the host name should have
1879 appeared instead of "NULL".
1881 10. Since release 3.03, if Exim is called by a uid other than root or the Exim
1882 user that is built into the binary, and the -C or -D options is used, root
1883 privilege is dropped before the configuration file is read. In addition,
1884 logging is switched to stderr instead of the normal log files. If the
1885 configuration then re-defines the Exim user, the unprivileged environment
1886 is probably not what is expected, so Exim logs a panic warning message (but
1889 However, if deliver_drop_privilege is set, the unprivileged state may well
1890 be exactly what is intended, so the warning has been cut out in that case,
1891 and Exim is allowed to try to write to its normal log files.
1897 1. smtp_return_error_details was not giving details for temporary sender
1898 or receiver verification errors.
1900 2. Diagnose a configuration error if two authenticators have the same public
1903 3. Exim used not to create the message log file for a message until the first
1904 delivery attempt. This could be confusing when incoming messages were held
1905 for policy or load reasons. The message log file is now created at the time
1906 the message is received, and an initial "Received" line is written to it.
1908 4. The automatically generated man page for command line options had a minor
1909 bug that caused no ill effects; however, a more serious problem was that
1910 the procedure for building the man page automatically didn't always
1911 operate. Consequently, release 4.20 contains an out-of-date version. This
1912 shouldn't happen again.
1914 5. When building Exim with embedded Perl support, the script that builds the
1915 Makefile was calling 'perl' to find its compile-time parameters, ignoring
1916 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
1918 6. The freeze_tell option was not being used for messages that were frozen on
1919 arrival, either by an ACL or by local_scan().
1921 7. Added the smtp_incomplete_transaction log selector.
1923 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
1924 was accepting AUTH without a new EHLO.
1926 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
1927 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
1930 10. Logging of TCP/IP connections (when configured) now happens in the main
1931 daemon process instead of the child process, so that the TCP/IP connection
1932 count is more accurate (but it can never be perfect).
1934 11. The use of "drop" in a nested ACL was not being handled correctly in the
1935 outer ACL. Now, if condition failure induced by the nested "drop" causes
1936 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
1937 or "require"), the connection is dropped.
1939 12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
1940 that yield "discard" can now be used with an "accept" or a "discard" verb,
1941 but an error is generated for any others (because I can't see a useful way
1942 to define what should happen).
1944 13. When an ACL is read dynamically from a file (or anywhere else), the lines
1945 are now processed in the same way as lines in the Exim configuration file.
1946 In particular, continuation lines are supported.
1948 14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
1950 15. Added -ti meaning -t -i.
1952 16. Check for letters, digits, hyphens, and dots in the names of dnslist
1953 domains, and warn by logging if others are found.
1955 17. At least on BSD, alignment is not guarenteed for the array of ifreq's
1956 returned from GIFCONF when Exim is trying to find the list of interfaces on
1957 a host. The code in os.c has been modified to copy each ifreq to an aligned
1958 structure in all cases.
1960 Also, in some cases, the returned ifreq's were being copied to a 'struct
1961 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
1962 means the last couple of bytes of an IPv6 address could be chopped if the
1963 ifreq contained only a normal sockaddr (14 bytes storage).
1965 18. Named domain lists were not supported in the hosts_treat_as_local option.
1966 An entry such as +xxxx was not recognized, and was treated as a literal
1969 19. Ensure that header lines added by a DATA ACL are included in the reject log
1970 if the ACL subsequently rejects the message.
1972 20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
1973 MD5 (which is deprecated).
1975 21. When testing a filter file using -bf, Exim was writing a message when it
1976 took the sender from a "From " line in the message, but it was not doing so
1977 when it took $return_path from a Return-Path: header line. It now does.
1979 22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
1980 with a valid header line field name (a series of printing characters
1981 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
1983 23. Changed "disc" in the source to "disk" to conform to the documentation and
1984 the book and for uniformity.
1986 24. Ignore Sendmail's -Ooption=value command line item.
1988 25. When execve() failed while trying to run a command in a pipe transport,
1989 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
1990 could be confused with a return value of 69 from the command itself. This
1991 has been changed to 127, the value the shell returns if it is asked to run
1992 a non-existent command. The wording for the related log line suggests a
1993 non-existent command as the problem.
1995 26. If received_header_text expands to an empty string, do not add a Received:
1996 header line to the message. (Well, it adds a token one on the spool, but
1997 marks it "old" so that it doesn't get used or transmitted.)
1999 27. Installed eximstats 1.28 (addition of -nt option).
2001 28. There was no check for failure on the call to getsockname() in the daemon
2002 code. This can fail if there is a shortage of resources on the system, with
2003 ENOMEM, for example. A temporary error is now given on failure.
2005 29. Contrary to the C standard, it seems that in some environments, the
2006 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
2007 program. Exim now does this explicitly; it affects the formatting of
2008 timestamps using strftime().
2010 30. If exiqsumm was given junk data, it threw up some uninitialized variable
2011 complaints. I've now initialized all the variables, to avoid this.
2013 32. Header lines added by a system filter were not being "seen" during
2014 transport-time rewrites.
2016 33. The info_callback() function passed to OpenSSL is set up with type void
2017 (*)(SSL *, int, int), as described somewhere. However, when calling the
2018 function (actually a macro) that sets it up, the type void(*)() is
2019 expected. I've put in a cast to prevent warnings from picky compilers.
2021 34. If a DNS black list lookup found a CNAME record, but there were no A
2022 records associated with the domain it pointed at, Exim crashed.
2024 35. If a DNS black list lookup returned more than one A record, Exim ignored
2025 all but the first. It now scans all returned addresses if a particular IP
2026 value is being sought. In this situation, the contents of the
2027 $dnslist_value variable are a list of all the addresses, separated by a
2030 36. Tightened up the rules for host name lookups using reverse DNS. Exim used
2031 to accept a host name and all its aliases if the forward lookup for any of
2032 them yielded the IP address of the incoming connection. Now it accepts only
2033 those names whose forward lookup yields the correct IP address. Any other
2034 names are discarded. This closes a loophole whereby a rogue DNS
2035 administrator could create reverse DNS records to break through a
2036 wildcarded host restriction in an ACL.
2038 37. If a user filter or a system filter that ran in a subprocess used any of
2039 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2040 the wrong values were passed to the pipe command ($thisaddress had the
2041 value of $0, $0 had the value of $1, etc). This bug was introduced by
2042 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
2044 38. Improved the line breaking for long SMTP error messages from ACLs.
2045 Previously, if there was no break point between 40 and 75 characters, Exim
2046 left the rest of the message alone. Two changes have been made: (a) I've
2047 reduced the minimum length to 35 characters; (b) if it can't find a break
2048 point between 35 and 75 characters, it looks ahead and uses the first one
2049 that it finds. This may give the occasional overlong line, but at least the
2050 remaining text gets split now.
2052 39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2053 file descriptors might be low, and that setting 1000 would always raise it.
2054 It turns out that in some environments, the limit is already over 1000 and
2055 that lowering it causes trouble. So now Exim takes care not to decrease it.
2057 40. When delivering a message, the value of $return_path is set to $sender_
2058 address at the start of routing (routers may change the value). By an
2059 oversight, this default was not being set up when an address was tested by
2060 -bt or -bv, which affected the outcome if any router or filter referred to
2063 41. The idea of the "warn" ACL verb is that it adds a header or writes to the
2064 log only when "message" or "log_message" are set. However, if one of the
2065 conditions was an address verification, or a call to a nested ACL, the
2066 messages generated by the underlying test were being passed through. This
2067 no longer happens. The underlying message is available in $acl_verify_
2068 message for both "message" and "log_message" expansions, so it can be
2069 passed through if needed.
2071 42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2072 new expansion $bh_ to give the encoded byte string without charset
2073 translation. Translation happens only if iconv() is available; HAVE_ICONV
2074 indicates this at build time. HEADERS_CHARSET gives the charset to
2075 translate to; headers_charset can change it in the configuration, and
2076 "headers charset" can change it in an individual filter file.
2078 43. Now that we have a default RFC 2047 charset (see above), the code in Exim
2079 that creates RFC 2047 encoded "words" labels them as that charset instead
2080 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
2081 expansion operator; (ii) when Exim creates a From: line for a local
2082 message; (iii) when a header line is rewritten to include a "phrase" part.
2084 44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
2085 buggy, causing it to skip the first lines of messages whose message ID
2086 ended in 'D'. This would not have bitten before Exim release 4.14, because
2087 message IDs were unlikely to end in 'D' before then. The effect was to have
2088 incorrect size information for certain domains.
2090 45. #include "config.h" was missing at the start of the crypt16.c module. This
2091 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
2094 46. If there was a timeout during a "random" callout check, Exim treated it as
2095 a failure of the random address, and carried on sending RSET and the real
2096 address. If the delay was just some slowness somewhere, the response to the
2097 original RCPT would be taken as a response to RSET and so on, causing
2098 mayhem of various kinds.
2100 47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
2101 when I implemented it. It didn't allow for the fact that some option values
2102 may legitimatetly be negative (e.g. size_addition), and it didn't even do
2103 the right test for positive values.
2105 48. Domain names in DNS records are case-independent. Exim always looks them up
2106 in lower case. Some resolvers return domain names in exactly the case they
2107 appear in the zone file, that is, they may contain uppercase letters. Not
2108 all resolvers do this - some return always lower case. Exim was treating a
2109 change of case by a resolver as a change of domain, similar to a widening
2110 of a domain abbreviation. This triggered its re-routing code and so it was
2111 trying to route what was effectively the same domain again. This normally
2112 caused routing to fail (because the router wouldn't handle the domain
2113 twice). Now Exim checks for this case specially, and just changes the
2114 casing of the domain that it ultimately uses when it transmits the message
2117 49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
2120 50. If a filter generated a file delivery with a non-absolute name (possible if
2121 no home directory exists for the router), the forbid_file option was not
2124 51. Added '&' feature to dnslists, to provide bit mask matching in addition to
2125 the existing equality matching.
2127 52. Exim was using ints instead of ino_t variables in some places where it was
2128 dealing with inode numbers.
2130 53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
2131 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
2132 called TMPDIR, and if it finds it is different, it changes its value.
2134 54. The smtp_printf() function is now made available to local_scan() so
2135 additional output lines can be written before returning. There is also an
2136 smtp_fflush() function to enable the detection of a dropped connection.
2137 The variables smtp_input and smtp_batched_input are exported to
2140 55. Changed the default runtime configuration: the message "Unknown user"
2141 has been removed from the ACL, and instead placed on the localuser router,
2142 using the cannot_route_message feature. This means that any verification
2143 failures that generate their own messages won't get overridden. Similarly,
2144 the "Unrouteable address" message that was in the ACL for unverifiable
2145 relay addresses has also been removed.
2147 56. Added hosts_avoid_esmtp to the smtp transport.
2149 57. The exicyclog script was not checking for the esoteric option
2150 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
2151 will work only if exicyclog is run under the appropriate euid.
2153 58. Following a discussion on the list, the rules by which Exim recognises line
2154 endings on incoming messages have been changed. The -dropcr and drop_cr
2155 options are now no-ops, retained only for backwards compatibility. The
2156 following line terminators are recognized: LF CRLF CR. However, special
2157 processing applies to CR:
2159 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
2160 nor a local message in the state where . is a terminator.
2162 (ii) If a bare CR is encountered in a header line, an extra space is added
2163 after the line terminator so as not to end the header. The reasoning
2164 behind this is that bare CRs in header lines are most likely either
2165 to be mistakes, or people trying to play silly games.
2167 59. The size of a message, as listed by "-bp" or in the Exim monitor window,
2168 was being incorrectly given as 18 bytes larger than it should have been.
2169 This is a VOB (very old bug).
2171 60. This may never have affected anything current, but just in case it has:
2172 When the local host is found other than at the start of a list of hosts,
2173 the local host, those with the same MX, and any that follow, are discarded.
2174 When the list in question was part of a longer list of hosts, the following
2175 hosts (not currently being processed) were also being discarded. This no
2176 longer happens. I'm not sure if this situation could ever has previously
2179 61. Added the "/MX" feature to lists of hosts in the manualroute and query
2182 62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
2183 header. This is something that is recommended in a new Internet Draft, and
2184 is something that is documented as being done by Sendmail. There are two
2185 possible values. For messages generated by the autoreply transport, Exim
2188 Auto-Submitted: auto-replied
2190 whereas for all other generated messages (e.g. bounces) it adds
2192 Auto-Submitted: auto-generated
2194 63. The "personal" condition in filters now includes a test for the
2195 Auto-Submitted: header. If it contains the string "auto-" the message it
2196 not considered personal.
2198 64. Added rcpt_include_affixes as a generic transport option.
2200 65. Added queue_only_override (default true).
2202 66. Added the syslog_duplication option.
2204 67. If what should have been the first header line of a message consisted of
2205 a space followed by a colon, Exim was mis-interpreting it as a header line.
2206 It isn't of course - it is syntactically invalid and should therefore be
2207 treated as the start of the message body. The misbehaviour could have
2208 caused a number of strange effects, including loss of data in subsequent
2209 header lines, and spool format errors.
2211 68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
2212 client host had authenticated. This control can now be exercised by an ACL
2213 for more flexibility.
2215 69. By default, callouts do not happen when testing with -bh. There is now a
2216 variant, -bhc, which does actually run the callout code, including
2217 consulting and updating the callout cache.
2219 70. Added support for saslauthd authentication, courtesy of Alexander
2222 71. If statvfs() failed on the spool or log directories while checking their
2223 size for availability, Exim confusingly gave the error "space shortage".
2224 Furthermore, in debugging mode it crashed with a floating point exception.
2225 These checks are done if check_{spool,log}_{space,inodes} are set, and when
2226 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
2227 serious problem, Exim now writes to the main and panic logs when this
2228 happens, with details of the failure. It then refuses to accept the
2229 incoming message, giving the message "spool directory problem" or "log
2230 directory problem" with a 421 code for SMTP messages.
2232 72. When Exim is about to re-exec itself, it ensures that the file descriptors
2233 0, 1, and 2 exist, because some OS complain for execs without them (see
2234 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
2235 descriptors. However, the code omitted to check that the open succeeded,
2236 causing mysterious errors if for some reason the permissions on /dev/null
2237 got screwed. Now Exim writes a message to the main and panic logs, and
2238 bombs out if it can't open /dev/null.
2240 73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
2241 interact so that it is all more flexible. It is supposed to remain
2242 backwards compatible. Also added extra_local_interfaces.
2244 74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
2245 to bomb out with an assertion failure - to the client this appears as a
2246 connection drop. This problem occurs in the part of the code that was taken
2247 from the Samba project. Fortunately, the assertion is in a very simple
2248 function, so I have fixed this by reproducing the function inline in the
2249 one place where it is called, and arranging for authentication to fail
2250 instead of killing the process with assert().
2252 75. The SPA client code was not working when the server requested OEM rather
2253 than Unicode encoding.
2255 76. Added code to make require_files with a specific uid setting more usable in
2256 the case where statting the file as root fails - usually a non-root-mounted
2257 NFS file system. When this happens and the failure is EACCES, Exim now
2258 forks a subprocess and does the per-uid checking as the relevant uid.
2260 77. Added process_log_path.
2262 78. If log_file_path was not explicitly set, a setting of check_log_space or
2263 check_log_inodes was ignored.
2265 79. If a space check for the spool or log partitions fails, the incident is now
2266 logged. Of course, in the latter case the data may get lost...
2268 80. Added the %p formatting code to string_format() so that it can be used to
2269 print addresses in debug_print(). Adjusted all the address printing in the
2270 debugging in store.c to use %p rather than %d.
2272 81. There was a concern that a line of code in smtp_in.c could overflow a
2273 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
2274 initially expressed, the concern was not well-founded, because trailing
2275 spaces are removed early. However, if the trailing spaces were followed by
2276 a NULL, they did not get removed, so the overflow was possible. Two fixes
2279 (a) I re-wrote the offending code in a cleaner fashion.
2280 (b) If an incoming SMTP command contains a NULL character, it is rejected
2283 82. When Exim changes uid/gid to the Exim user at daemon start time, it now
2284 runs initgroups(), so that if the Exim user is in any additional groups,
2285 they will be used during message reception.
2291 The change log for 4.20 and earlier releases has been archived.
git://git.exim.org / users / heiko / exim.git / blob