1 $Cambridge: exim/doc/doc-txt/ChangeLog,v 1.78 2005/02/15 09:31:13 ph10 Exp $
3 Change log file for Exim from version 4.21
4 -------------------------------------------
7 A note about Exim versions 4.44 and 4.50
8 ----------------------------------------
10 Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
11 changes of various kinds. As a consequence, a big documentation update was
12 needed. This delayed the release for rather longer than seemed good, especially
13 in the light of a couple of (minor) security issues. Therefore, the changes
14 that fixed bugs were backported into 4.43, to create a 4.44 maintenance
15 release. So 4.44 and 4.50 are in effect two different branches that both start
18 I have left the 4.50 change log unchanged; it contains all the changes since
19 4.43. The change log for 4.44 is below; many of its items are identical to
20 those for 4.50. This seems to be the most sensible way to preserve the
21 historical information.
27 1. Minor wording change to the doc/README.SIEVE file.
29 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
30 computation of the current number of files was incorrect.
32 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
33 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
36 4. Give more explanation in the error message when the command for a transport
37 filter fails to execute.
39 5. There are several places where Exim runs a non-Exim command in a
40 subprocess. The SIGUSR1 signal should be disabled for these processes. This
41 was being done only for the command run by the queryprogram router. It is
42 now done for all such subprocesses. The other cases are: ${run, transport
43 filters, and the commands run by the lmtp and pipe transports.
45 6. Added CONFIGURE_GROUP build-time option.
47 7. Some older OS have a limit of 256 on the maximum number of file
48 descriptors. Exim was using setrlimit() to set 1000 as a large value
49 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
50 systems. I've change it so that if it can't get 1000, it tries for 256.
52 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
53 was an oversight, and furthermore, ever since the addition of extra
54 controls (e.g. 4.43/32), the checks on when to allow different forms of
55 "control" were broken. There should now be diagnostics for all cases when a
56 control that does not make sense is encountered.
58 9. Added the /retain_sender option to "control=submission".
60 10. $recipients is now available in the predata ACL (oversight).
62 11. Tidy the search cache before the fork to do a delivery from a message
63 received from the command line. Otherwise the child will trigger a lookup
64 failure and thereby defer the delivery if it tries to use (for example) a
65 cached ldap connection that the parent has called unbind on.
67 12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
68 of $address_data from the recipient verification was clobbered by the
71 13. The value of address_data from a sender verification is now available in
72 $sender_address_data in subsequent conditions in the ACL statement.
74 14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
76 15. Added a new option "connect=<time>" to callout options, to set a different
79 16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
80 was its contents. (It was OK if the option was not defined at all.)
82 17. A "Completed" log line is now written for messages that are removed from
83 the spool by the -Mrm option.
85 18. New variables $sender_verify_failure and $recipient_verify_failure contain
86 information about exactly what failed.
88 19. Added -dd to debug only the daemon process.
90 20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
91 handles timeouts, both on the server side and network timeouts. Renamed the
92 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
94 21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
95 It is now set to "smtps".
97 22. $host_address is now set to the target address during the checking of
100 23. When checking ignore_target_hosts for an ipliteral router, no host name was
101 being passed; this would have caused $sender_host_name to have been used if
102 matching the list had actually called for a host name (not very likely,
103 since this list is usually IP addresses). A host name is now passed as
106 24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
107 code that specifies a non-restarting handler (typically sigaction() in
108 modern systems) in an attempt to fix a rare and obscure crash bug.
110 25. Narrowed the window for a race in the daemon that could cause it to ignore
111 SIGCHLD signals. This is not a major problem, because they are used only to
112 wake it up if nothing else does.
114 26. A malformed maildirsize file could cause Exim to calculate negative values
115 for the mailbox size or file count. Odd effects could occur as a result.
116 The maildirsize information is now recalculated if the size or filecount
119 27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
120 support for a long time. Removed HAVE_SYS_VFS_H.
122 28. Installed the latest version of exipick from John Jetmore.
124 29. In an address list, if the pattern was not a regular expression, an empty
125 subject address (from a bounce message) matched only if the pattern was an
126 empty string. Non-empty patterns were not even tested. This was the wrong
127 because it is perfectly reasonable to use an empty address as part of a
128 database query. An empty address is now tested by patterns that are
129 lookups. However, all the other forms of pattern expect the subject to
130 contain a local part and a domain, and therefore, for them, an empty
131 address still always fails if the pattern is not itself empty.
133 30. Exim went into a mad DNS loop when attempting to do a callout where the
134 host was specified on an smtp transport, and looking it up yielded more
137 31. Re-factored the code for checking spool and log partition space into a
138 function that finds that data and another that does the check. The former
139 is then used to implement four new variables: $spool_space, $log_space,
140 $spool_inodes, and $log_inodes.
142 32. The RFC2047 encoding function was originally intended for short strings
143 such as real names; it was not keeping to the 75-character limit for
144 encoded words that the RFC imposes. It now respects the limit, and
145 generates multiple encoded words if necessary. To be on the safe side, I
146 have increased the buffer size for the ${rfc2047: expansion operator from
149 33. It is now permitted to omit both strings after an "if" condition; if the
150 condition is true, the result is "true". As before, when the second string
151 is omitted, a false condition yields an empty string. This makes it less
152 cumbersome to write custom ACL and router conditions.
154 34. Failure to deliver a bounce message always caused it to be frozen, even if
155 there was an errors_to setting on the router. The errors_to setting is now
158 35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
159 canonical form (fully expanded) before being placed in
160 $sender_host_address.
162 36. The table in the code that translates DNS record types into text (T_A to
163 "A" for instance) was missing entries for NS and CNAME. It is just possible
164 that this could have caused confusion if both these types were looked up
165 for the same domain, because the text type is used as part of Exim's
166 per-process caching. But the chance of anyone hitting this buglet seems
169 37. The dnsdb lookup has been extended in a number of ways.
171 (1) There is a new type, "zns", which walks up the domain tree until it
172 finds some nameserver records. It should be used with care.
174 (2) There is a new type, "mxh", which is like "mx" except that it returns
175 just the host names, not the priorities.
177 (3) It is now possible to give a list of domains (or IP addresses) to be
178 looked up. The behaviour when one of the lookups defers can be
179 controlled by a keyword.
181 (4) It is now possible to specify the separator character for use when
182 multiple records are returned.
184 38. The dnslists ACL condition has been extended: it is now possible to supply
185 a list of IP addresses and/or domains to be looked up in a particular DNS
188 39. Added log_selector=+queue_time_overall.
190 40. When running the queue in the test harness, wait just a tad after forking a
191 delivery process, to get repeatability of debugging output.
193 41. Include certificate and key file names in error message when GnuTLS fails
194 to set them up, because the GnuTLS error message doesn't include the name
195 of the failing file when there is a problem reading it.
197 42. Allow both -bf and -bF in the same test run.
199 43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
201 44. The "Exiscan patch" is now merged into the mainline Exim source.
203 45. Sometimes the final signoff response after QUIT could fail to get
204 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
205 < 0 before doing a fflush(). This bug looks as though it goes back to the
206 introduction of TLS in release 3.20, but "sometimes" must have been rare
207 because the tests only now provoked it.
209 46. Reset the locale to "C" after calling embedded Perl, in case it was changed
210 (this can affect the format of dates).
212 47. exim_tidydb, when checking for the continued existence of a message for
213 which it has found a message-specific retry record, was not finding
214 messages that were in split spool directories. Consequently, it was
215 deleting retry records that should have stayed in existence.
217 48. Steve fixed some bugs in eximstats.
219 49. The SPA authentication driver was not abandoning authentication and moving
220 on to the next authenticator when an expansion was forced to fail,
221 contradicting the general specification for all authenticators. Instead it
222 was generating a temporary error. It now behaves as specified.
224 50. The default ordering of permitted cipher suites for GnuTLS was pessimal
225 (the order specifies the preference for clients). The order is now AES256,
226 AES128, 3DES, ARCFOUR128.
228 51. Small patch to Sieve code - explicitly set From: when generating an
231 52. Exim crashed if a remote delivery caused a very long error message to be
232 recorded - for instance if somebody sent an entire SpamAssassin report back
233 as a large number of 550 error lines. This bug was coincidentally fixed by
234 increasing the size of one of Exim's internal buffers (big_buffer) that
235 happened as part of the Exiscan merge. However, to be on the safe side, I
236 have made the code more robust (and fixed the comments that describe what
239 53. Now that there can be additional text after "Completed" in log lines (if
240 the queue_time_overall log selector is set), a one-byte patch to exigrep
241 was needed to allow it to recognize "Completed" as not the last thing in
244 54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
245 patch that reportedly fixes this has been added. I am not expert enough to
246 create a test for it. This is what the patch creator wrote:
248 "I found a little strange behaviour of ldap code when working with
249 Windows 2003 AD Domain, where users was placed in more than one
250 Organization Units. When I tried to give exim partial DN, the exit code
251 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
252 But simultaneously result of request was absolutely normal ldap result,
253 so I produce this patch..."
255 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
256 REFERENCE, so I have modified the code to exclude the patch when that macro
259 55. Some experimental protocols are using DNS PTR records for new purposes. The
260 keys for these records are domain names, not reversed IP addresses. The
261 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
262 leaves it alone. Component reversal etc. now happens only for IP addresses.
265 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
267 57. Double the size of the debug message buffer (to 2048) so that more of very
268 long debug lines gets shown.
270 58. The exicyclog utility now does better if the number of log files to keep
271 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
273 59. Two changes related to the smtp_active_hostname option:
275 (1) $smtp_active_hostname is now available as a variable.
276 (2) The default for smtp_banner uses $smtp_active_hostname instead
277 of $primary_hostname.
279 60. The host_aton() function is supposed to be passed a string that is known
280 to be a valid IP address. However, in the case of IPv6 addresses, it was
281 not checking this. This is a hostage to fortune. Exim now panics and dies
282 if the condition is not met. A case was found where this could be provoked
283 from a dnsdb PTR lookup with an IPv6 address that had more than 8
284 components; fortuitously, this particular loophole had already been fixed
285 by change 4.50/55 above.
287 If there are any other similar loopholes, the new check in host_aton()
288 itself should stop them being exploited. The report I received stated that
289 data on the command line could provoke the exploit when Exim was running as
290 exim, but did not say which command line option was involved. All I could
291 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
295 61. There was a buffer overflow vulnerability in the SPA authentication code
296 (which came originally from the Samba project). I have added a test to the
297 spa_base64_to_bits() function which I hope fixes it.
300 62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
301 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
303 63. The daemon start-up calls getloadavg() while still root for those OS that
304 need the first call to be done as root, but it missed one case: when
305 deliver_queue_load_max is set with deliver_drop_privilege. This is
306 necessary for the benefit of the queue runner, because there is no re-exec
307 when deliver_drop_privilege is set.
309 64. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
312 65. Caching of lookup data for "hosts =" ACL conditions, when a named host list
313 was in use, was not putting the data itself into the right store pool;
314 consequently, it could be overwritten for a subsequent message in the same
315 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
318 66. Added hosts_max_try_hardlimit to the smtp transport, default 50.
320 67. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
321 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
322 the function were treating the return as a boolean value, which happened to
323 work because 0=false and not-0=true, but is not correct code.
325 68. The host_aton() function was not handling scoped IPv6 addresses (those
326 with, for example, "%eth0" on the end) correctly.
328 69. Fixed some compiler warnings in acl.c for the bitmaps specified with
329 negated items (that is, ~something) in unsigned ints. Some compilers
330 apparently mutter when there is no cast.
332 70. If an address verification called from an ACL failed, and did not produce a
333 user-specific message (i.e. there was only a "system" message), nothing was
334 put in $acl_verify_message. In this situation, it now puts the system
337 71. Change 4.23/11 added synchronization checking at the start of an SMTP
338 session; change 4.31/43 added the unwanted input to the log line - except
339 that it did not do this in the start of session case. It now does.
341 72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
342 This is wrong and can cause the other end to generate a synchronization
343 error if it is another Exim or anything else that does the synchronization
344 check. A QUIT command is no longer sent after a timeout.
346 73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
349 74. The defer_ok option of callout verification was not working if it was used
350 when verifying addresses in header lines, that is, for this case:
352 verify = header_sender/callout=defer_ok
354 75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
355 those file descriptors could be used for SMTP connections. If anything
356 wrote to stderr (the example that came up was "warn" in embedded Perl), it
357 could be sent to the SMTP client, causing chaos. The daemon now opens
358 stdin, stdout, and stderr to /dev/null when it puts itself into the
361 76. Arrange for output from Perl's "warn" command to be written to Exim's main
362 log by default. The user can override this with suitable Perl magic.
364 77. The use of log_message on a "discard" ACL verb, which is supposed to add to
365 the log message when discard triggers, was not working for the DATA ACL or
366 for the non-SMTP ACL.
368 78. Error message wording change in sieve.c.
371 ----------------------------------------------------
372 See the note above about the 4.44 and 4.50 releases.
373 ----------------------------------------------------
379 1. Change 4.43/35 introduced a bug that caused file counts to be
380 incorrectly computed when quota_filecount was set in an appendfile
383 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
384 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
387 3. Give more explanation in the error message when the command for a transport
388 filter fails to execute.
390 4. There are several places where Exim runs a non-Exim command in a
391 subprocess. The SIGUSR1 signal should be disabled for these processes. This
392 was being done only for the command run by the queryprogram router. It is
393 now done for all such subprocesses. The other cases are: ${run, transport
394 filters, and the commands run by the lmtp and pipe transports.
396 5. Some older OS have a limit of 256 on the maximum number of file
397 descriptors. Exim was using setrlimit() to set 1000 as a large value
398 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
399 systems. I've change it so that if it can't get 1000, it tries for 256.
401 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
402 was an oversight, and furthermore, ever since the addition of extra
403 controls (e.g. 4.43/32), the checks on when to allow different forms of
404 "control" were broken. There should now be diagnostics for all cases when a
405 control that does not make sense is encountered.
407 7. $recipients is now available in the predata ACL (oversight).
409 8. Tidy the search cache before the fork to do a delivery from a message
410 received from the command line. Otherwise the child will trigger a lookup
411 failure and thereby defer the delivery if it tries to use (for example) a
412 cached ldap connection that the parent has called unbind on.
414 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
415 of $address_data from the recipient verification was clobbered by the
418 10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
419 was its contents. (It was OK if the option was not defined at all.)
421 11. A "Completed" log line is now written for messages that are removed from
422 the spool by the -Mrm option.
424 12. $host_address is now set to the target address during the checking of
427 13. When checking ignore_target_hosts for an ipliteral router, no host name was
428 being passed; this would have caused $sender_host_name to have been used if
429 matching the list had actually called for a host name (not very likely,
430 since this list is usually IP addresses). A host name is now passed as
433 14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
434 code that specifies a non-restarting handler (typically sigaction() in
435 modern systems) in an attempt to fix a rare and obscure crash bug.
437 15. Narrowed the window for a race in the daemon that could cause it to ignore
438 SIGCHLD signals. This is not a major problem, because they are used only to
439 wake it up if nothing else does.
441 16. A malformed maildirsize file could cause Exim to calculate negative values
442 for the mailbox size or file count. Odd effects could occur as a result.
443 The maildirsize information is now recalculated if the size or filecount
446 17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
447 support for a long time. Removed HAVE_SYS_VFS_H.
449 18. Updated exipick to current release from John Jetmore.
451 19. Allow an empty sender to be matched against a lookup in an address list.
452 Previously the only cases considered were a regular expression, or an
455 20. Exim went into a mad DNS lookup loop when doing a callout where the
456 host was specified on the transport, if the DNS lookup yielded more than
459 21. The RFC2047 encoding function was originally intended for short strings
460 such as real names; it was not keeping to the 75-character limit for
461 encoded words that the RFC imposes. It now respects the limit, and
462 generates multiple encoded words if necessary. To be on the safe side, I
463 have increased the buffer size for the ${rfc2047: expansion operator from
466 22. Failure to deliver a bounce message always caused it to be frozen, even if
467 there was an errors_to setting on the router. The errors_to setting is now
470 23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
471 canonical form (fully expanded) before being placed in
472 $sender_host_address.
474 24. Updated eximstats to version 1.33
476 25. Include certificate and key file names in error message when GnuTLS fails
477 to set them up, because the GnuTLS error message doesn't include the name
478 of the failing file when there is a problem reading it.
480 26. Expand error message when OpenSSL has problems setting up cert/key files.
483 27. Reset the locale to "C" after calling embedded Perl, in case it was changed
484 (this can affect the format of dates).
486 28. exim_tidydb, when checking for the continued existence of a message for
487 which it has found a message-specific retry record, was not finding
488 messages that were in split spool directories. Consequently, it was
489 deleting retry records that should have stayed in existence.
491 29. eximstats updated to version 1.35
492 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
493 1.35 - bugfix such that pie charts by volume are generated correctly
495 30. The SPA authentication driver was not abandoning authentication and moving
496 on to the next authenticator when an expansion was forced to fail,
497 contradicting the general specification for all authenticators. Instead it
498 was generating a temporary error. It now behaves as specified.
500 31. The default ordering of permitted cipher suites for GnuTLS was pessimal
501 (the order specifies the preference for clients). The order is now AES256,
502 AES128, 3DES, ARCFOUR128.
504 31. Small patch to Sieve code - explicitly set From: when generating an
507 32. Exim crashed if a remote delivery caused a very long error message to be
508 recorded - for instance if somebody sent an entire SpamAssassin report back
509 as a large number of 550 error lines. This bug was coincidentally fixed by
510 increasing the size of one of Exim's internal buffers (big_buffer) that
511 happened as part of the Exiscan merge. However, to be on the safe side, I
512 have made the code more robust (and fixed the comments that describe what
515 33. Some experimental protocols are using DNS PTR records for new purposes. The
516 keys for these records are domain names, not reversed IP addresses. The
517 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
518 leaves it alone. Component reversal etc. now happens only for IP addresses.
521 34. The host_aton() function is supposed to be passed a string that is known
522 to be a valid IP address. However, in the case of IPv6 addresses, it was
523 not checking this. This is a hostage to fortune. Exim now panics and dies
524 if the condition is not met. A case was found where this could be provoked
525 from a dnsdb PTR lookup with an IPv6 address that had more than 8
526 components; fortuitously, this particular loophole had already been fixed
527 by change 4.50/55 or 4.44/33 above.
529 If there are any other similar loopholes, the new check in host_aton()
530 itself should stop them being exploited. The report I received stated that
531 data on the command line could provoke the exploit when Exim was running as
532 exim, but did not say which command line option was involved. All I could
533 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
537 35. There was a buffer overflow vulnerability in the SPA authentication code
538 (which came originally from the Samba project). I have added a test to the
539 spa_base64_to_bits() function which I hope fixes it.
542 36. The daemon start-up calls getloadavg() while still root for those OS that
543 need the first call to be done as root, but it missed one case: when
544 deliver_queue_load_max is set with deliver_drop_privilege. This is
545 necessary for the benefit of the queue runner, because there is no re-exec
546 when deliver_drop_privilege is set.
548 37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
549 was in use, was not putting the data itself into the right store pool;
550 consequently, it could be overwritten for a subsequent message in the same
551 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
554 38. Sometimes the final signoff response after QUIT could fail to get
555 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
556 < 0 before doing a fflush(). This bug looks as though it goes back to the
557 introduction of TLS in release 3.20, but "sometimes" must have been rare
558 because the tests only now provoked it.
564 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
565 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
566 Now it returns an integer. A number of calls were still expecting a T/F
567 return. Fortuitously, in all cases, the tests worked in OK situations,
568 which is the norm. However, things would have gone wrong on any write
569 failures on the smtp file descriptor. This function is used when sending
570 messages over SMTP and also when doing verify callouts.
572 2. When Exim is called to do synchronous delivery of a locally submitted
573 message (the -odf or -odi options), it no longer closes stderr before doing
576 3. Implemented the mua_wrapper option.
578 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
580 5. Implemented the functions header_remove(), header_testname(),
581 header_add_at_position(), and receive_remove_recipient(), and exported them
584 6. If an ACL "warn" statement specified the addition of headers, Exim already
585 inserted X-ACL-Warn: at the start if there was no header name. However, it
586 was not making this test for the second and subsequent header lines if
587 there were newlines in the string. This meant that an invalid header could
588 be inserted if Exim was badly configured.
590 7. Allow an ACL "warn" statement to add header lines at the start or after all
591 the Received: headers, as well as at the end.
593 8. Added the rcpt_4xx retry error code.
595 9. Added postmaster_mailfrom=xxx to callout verification option.
597 10. Added mailfrom=xxxx to the callout verification option, for verify=
600 11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
601 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
603 12. Inserted some casts to stop certain compilers warning when using pointer
604 differences as field lengths or precisions in printf-type calls (mostly
605 affecting debugging statements).
607 13. Added optional readline() support for -be (dynamically loaded).
609 14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
610 same clock tick as a message's arrival, so that its received time was the
611 same as the "first fail" time on the retry record, and that message
612 remained on the queue past the ultimate address timeout, every queue runner
613 would try a delivery (because it was past the ultimate address timeout) but
614 after another failure, the ultimate address timeout, which should have then
615 bounced the address, did not kick in. This was a "< instead of <=" error;
616 in most cases the first failure would have been in the next clock tick
617 after the received time, and all would be well.
619 15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
620 being recognized when the domain list was tested by the match_domain
621 condition in an expansion string.
623 16. Added the ${str2b64: operator.
625 17. Exim was always calling setrlimit() to set a large limit for the number of
626 processes, without checking whether the existing limit was already
627 adequate. (It did check for the limit on file descriptors.) Furthermore,
628 errors from getrlimit() and setrlimit() were being ignored. Now they are
629 logged to the main and panic logs, but Exim does carry on, to try to do its
630 job under whatever limits there are.
632 18. Imported PCRE 5.0.
634 19. Trivial typo in log message " temporarily refused connection" (the leading
637 20. If the log selector return_path_on_delivery was set and an address was
638 redirected to /dev/null, the delivery process crashed because it assumed
639 that a return path would always be set for a "successful" delivery. In this
640 case, the whole delivery is bypassed as an optimization, and therefore no
643 21. Internal re-arrangement: the function for sending a challenge and reading
644 a response while authentication was assuming a zero-terminated challenge
645 string. It's now changed to take a pointer and a length, to allow for
646 binary data in such strings.
648 22. Added the cyrus_sasl authenticator (code supplied by MBM).
650 23. Exim was not respecting finduser_retries when seeking the login of the
651 uid under which it was called; it was always trying 10 times. (The default
652 setting of finduser_retries is zero.) Also, it was sleeping after the final
653 failure, which is pointless.
655 24. Implemented tls_on_connect_ports.
657 25. Implemented acl_smtp_predata.
659 26. If the domain in control=submission is set empty, Exim assumes that the
660 authenticated id is a complete email address when it generates From: or
661 Sender: header lines.
663 27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
664 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
665 chown and chgrp in /bin and hostname in /usr/bin.
667 28. Exim was keeping the "process log" file open after each use, just as it
668 does for the main log. This opens the possibility of it remaining open for
669 long periods when the USR1 signal hits a daemon. Occasional processlog
670 errors were reported, that could have been caused by this. Anyway, it seems
671 much more sensible not to leave this file open at all, so that is what now
674 29. The long-running daemon process does not normally write to the log once it
675 has entered its main loop, and it closes the log before doing so. This is
676 so that log files can straightforwardly be renamed and moved. However,
677 there are a couple of unusual error situations where the daemon does write
678 log entries, and I had neglected to close the log afterwards.
680 30. The text of an SMTP error response that was received during a remote
681 delivery was being truncated at 512 bytes. This is too short for some of
682 the long messages that one sometimes sees. I've increased the limit to
685 31. It is now possible to make retry rules that apply only when a message has a
686 specific sender, in particular, an empty sender.
688 32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
689 it possible to be selective about when SMTP synchronization is enforced.
691 33. Added "control = caseful_local_part" and "control = "caselower_local_part".
693 32. Implemented hosts_connection_nolog.
695 33. Added an ACL for QUIT.
697 34. Setting "delay_warning=" to disable warnings was not working; it gave a
700 35. Added mailbox_size and mailbox_filecount to appendfile.
702 36. Added control = no_multiline_responses to ACLs.
704 37. There was a bug in the logic of the code that waits for the clock to tick
705 in the case where the clock went backwards by a substantial amount such
706 that the microsecond fraction of "now" was more than the microsecond
707 fraction of "then" (but the whole seconds number was less).
709 38. Added support for the libradius Radius client library this is found on
710 FreeBSD (previously only the radiusclient library was supported).
716 1. When certain lookups returned multiple values in the form name=value, the
717 quoting of the values was not always being done properly. Specifically:
718 (a) If the value started with a double quote, but contained no whitespace,
720 (b) If the value contained whitespace other than a space character (i.e.
721 tabs or newlines or carriage returns) it was not quoted.
722 This fix has been applied to the mysql and pgsql lookups by writing a
723 separate quoting function and calling it from the lookup code. The fix
724 should probably also be applied to nisplus, ibase and oracle lookups, but
725 since I cannot test any of those, I have not disturbed their existing code.
727 2. A hit in the callout cache for a specific address caused a log line with no
728 reason for rejecting RCPT. Now it says "Previous (cached) callout
729 verification failure".
731 3. There was an off-by-one bug in the queryprogram router. An over-long
732 return line was truncated at 256 instead of 255 characters, thereby
733 overflowing its buffer with the terminating zero. As well as fixing this, I
734 have increased the buffer size to 1024 (and made a note to document this).
736 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
737 when Exim is waiting for an SMTP response from a remote server, Exim
738 restarts its select() call on the socket, thereby resetting its timeout.
739 This is not a problem when such interrupts are rare. Somebody set up a cron
740 job to run exiwhat every 2 minutes, which is less than the normal select()
741 timeout (5 or 10 minutes). This meant that the select() timeout never
742 kicked in because it was always reset. I have fixed this by comparing the
743 time when an interrupt arrives with the time at the start of the first call
744 to select(). If more time than the timeout has elapsed, the interrupt is
745 treated as a timeout.
747 5. Some internal re-factoring in preparation for the addition of Sieve
748 extensions (by MH). In particular, the "personal" test is moved to a
749 separate function, and given an option for scanning Cc: and Bcc: (which is
750 not set for Exim filters).
752 6. When Exim created an email address using the login of the caller as the
753 local part (e.g. when creating a From: or Sender: header line), it was not
754 quoting the local part when it contained special characters such as @.
756 7. Installed new OpenBSD configuration files.
758 8. Reworded some messages for syntax errors in "and" and "or" conditions to
759 try to make them clearer.
761 9. Callout options, other than the timeout value, were being ignored when
762 verifying sender addresses in header lines. For example, when using
764 verify = header_sender/callout=no_cache
766 the cache was (incorrectly) being used.
768 10. Added a missing instance of ${EXE} to the exim_install script; this affects
769 only the Cygwin environment.
771 11. When return_path_on_delivery was set as a log selector, if different remote
772 addresses in the same message used different return paths and parallel
773 remote delivery occurred, the wrong values would sometimes be logged.
774 (Whenever a remote delivery process finished, the return path value from
775 the most recently started remote delivery process was logged.)
777 12. RFC 3848 specifies standard names for the "with" phrase in Received: header
778 lines when AUTH and/or TLS are in use. This is the "received protocol"
779 field. Exim used to use "asmtp" for authenticated SMTP, without any
780 indication (in the protocol name) for TLS use. Now it follows the RFC and
781 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
782 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
783 names appear in log lines as well as in Received: header lines.
785 13. Installed MH's patches for Sieve to add the "copy" and "vacation"
786 extensions, and comparison tests, and to fix some bugs.
788 14. Changes to the "personal" filter test:
790 (1) The test was buggy in that it was just doing the equivalent of
791 "contains" tests on header lines. For example, if a user's address was
792 anne@some.where, the "personal" test would incorrectly be true for
794 To: susanne@some.where
796 This test is now done by extracting each address from the header in turn,
797 and checking the entire address. Other tests that are part of "personal"
798 are now done using regular expressions (for example, to check local parts
799 of addresses in From: header lines).
801 (2) The list of non-personal local parts in From: addresses has been
802 extended to include "listserv", "majordomo", "*-request", and "owner-*",
803 taken from the Sieve specification recommendations.
805 (3) If the message contains any header line starting with "List-" it is
806 treated as non-personal.
808 (4) The test for "circular" in the Subject: header line has been removed
809 because it now seems ill-conceived.
811 15. Minor typos in src/EDITME comments corrected.
813 16. Installed latest exipick from John Jetmore.
815 17. If headers_add on a router specified a text string that was too long for
816 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
817 of string_sprintf() is now avoided.
819 18. $message_body_size was not set (it was always zero) when running the DATA
820 ACL and the local_scan() function.
822 19. For the "mail" command in an Exim filter, no default was being set for
823 the once_repeat time, causing a random time value to be used if "once" was
824 specified. (If the value happened to be <= 0, no repeat happened.) The
825 default is now 0s, meaning "never repeat". The "vacation" command was OK
826 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
827 (I found it when inspecting the code).
829 20. There is now an overall timeout for performing a callout verification. It
830 defaults to 4 times the callout timeout, which applies to individual SMTP
831 commands during the callout. The overall timeout applies when there is more
832 than one host that can be tried. The timeout is checked before trying the
833 next host. This prevents very long delays if there are a large number of
834 hosts and all are timing out (e.g. when the network connections are timing
835 out). The value of the overall timeout can be changed by specifying an
836 additional sub-option for "callout", called "maxwait". For example:
838 verify = sender/callout=5s,maxwait=20s
840 21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
841 to the end before writing, but this should make it even safer).
843 22. Exim was forgetting that it had advertised PIPELINING for the second and
844 subsequent messages on an SMTP connection. It was also not resetting its
845 memory on STARTTLS and an internal HELO.
847 23. When Exim logs an SMTP synchronization error within a session, it now
848 records whether PIPELINING has been advertised or not.
850 24. Added 3 instances of "(long int)" casts to time_t variables that were being
851 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
852 rather than long int.
854 25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
856 26. Added the never_mail option to autoreply.
862 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
863 crash if the getsockname() call failed; this can happen if a connection is
864 closed very soon after it is established. The problem was simply in the
865 order in which certain operations were done, causing Exim to try to write
866 to the SMTP stream before it had set up the file descriptor. The bug has
867 been fixed by making things happen in the correct order.
873 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
874 before the connection was closed, thus losing the rejection response.
876 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
877 some early Solaris releases, but causes trouble in current releases where
878 socklen_t is defined.
880 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
883 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
886 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
887 that releasing the top of it at the end releases what was used for sub-
888 expansions (unless the block got too big). However, discard this block if
889 the first thing is a variable or header, so that we can use its block when
890 it is dynamic (useful for very large $message_headers, for example).
892 6. Lookups now cache *every* query, not just the most recent. A new, separate
893 store pool is used for this. It can be recovered when all lookup caches are
894 flushed. Lookups now release memory at the end of their result strings.
895 This has involved some general refactoring of the lookup sources.
897 7. Some code has been added to the store_xxx() functions to reduce the amount
898 of flapping under certain conditions.
900 8. log_incoming_interface used to affect only the <= reception log lines. Now
901 it causes the local interface and port to be added to several more SMTP log
902 lines, for example "SMTP connection from", and rejection lines.
904 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
906 10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
908 11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
909 could be overwritten at the end of the current message (or the start of a
910 new message if it was set in a HELO ACL). The value is now preserved for
911 the duration of the SMTP connection.
913 12. If a transport had a headers_rewrite setting, and a matching header line
914 contained an unqualified address, that address was qualified, even if it
915 did not match any rewriting rules. The underlying bug was that the values
916 of the flags that permit the existence of unqualified sender and recipient
917 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
918 non-local messages, and by -bnq for local messages) were not being
919 preserved with the message after it was received.
921 13. When Exim was logging an SMTP synchronization error, it could sometimes log
922 "next input=" as part of the text comprising the host identity instead of
923 the correct text. The code was using the same buffer for two different
924 strings. However, depending on which order the printing function evaluated
925 its arguments, the bug did not always show up. Under Linux, for example, my
926 test suite worked just fine.
928 14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
929 doesn't work with some older versions of Perl. It has been changed to "my",
930 which in any case is probably the better facility to use.
932 15. A really picky compiler found some instances of statements for creating
933 error messages that either had too many or two few arguments for the format
936 16. The size of the buffer for calls to the DNS resolver has been increased
937 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
938 for addresses that have a lot of PTR records. This alleviates a problem; it
939 does not fully solve it.
941 17. A dnsdb lookup for PTR records that receives more data than will fit in the
942 buffer now truncates the list and logs the incident, which is the same
943 action as happens when Exim is looking up a host name and its aliases.
944 Previously in this situation something unpredictable would happen;
945 sometimes it was "internal error: store_reset failed".
947 18. If a server dropped the connection unexpectedly when an Exim client was
948 using GnuTLS and trying to read a response, the client delivery process
949 crashed while trying to generate an error log message.
951 19. If a "warn" verb in an ACL added multiple headers to a message in a single
954 warn message = H1: something\nH2: something
956 the text was added as a single header line from Exim's point of view
957 though it ended up OK in the delivered message. However, searching for the
958 second and subsequent header lines using $h_h2: did not work. This has been
959 fixed. Similarly, if a system filter added multiple headers in this way,
960 the routers could not see them.
962 20. Expanded the error message when iplsearch is called with an invalid key to
963 suggest using net-iplsearch in a host list.
965 21. When running tests using -bh, any delays imposed by "delay" modifiers in
966 ACLs are no longer actually imposed (and a message to that effect is
969 22. If a "gecos" field in a passwd entry contained escaped characters, in
970 particular, if it contained a \" sequence, Exim got it wrong when building
971 a From: or a Sender: header from that name. A second bug also caused
972 incorrect handling when an unquoted " was present following a character
975 23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
976 was not being matched caselessly.
978 24. Arranged for all hyphens in the exim.8 source to be escaped with
981 25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
982 properly. Recipient callout cache records were still being keyed to include
983 the sender, even when use_sender was set false. This led to far more
984 callouts that were necessary. The sender is no longer included in the key
985 when use_sender is false.
987 26. Added "control = submission" modifier to ACLs.
989 27. Added the ${base62d: operator to decode base 62 numbers.
991 28. dnsdb lookups can now access SRV records.
993 29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
994 the configuration file.
996 30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
997 (-v) mode. This makes the output for a verbose queue run more intelligible.
999 31. Added a use_postmaster feature to recipient callouts.
1001 32. Added the $body_zerocount variable, containing the number of binary zero
1002 bytes in the message body.
1004 33. The time of last modification of the "new" subdirectory is now used as the
1005 "mailbox time last read" when there is a quota error for a maildir
1008 34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
1010 35. Added +ignore_unknown as a special item in host lists.
1012 36. Code for decoding IPv6 addresses in host lists is now included, even if
1013 IPv6 support is not being compiled. This fixes a bug in which an IPv6
1014 address was recognized as an IP address, but was then not correctly decoded
1015 into binary, causing unexpected and incorrect effects when compared with
1022 1. Very minor rewording of debugging text in manualroute to say "list of
1023 hosts" instead of "hostlist".
1025 2. If verify=header_syntax was set, and a header line with an unqualified
1026 address (no domain) and a large number of spaces between the end of the
1027 name and the colon was received, the reception process suffered a buffer
1028 overflow, and (when I tested it) crashed. This was caused by some obsolete
1029 code that should have been removed. The fix is to remove it!
1031 3. When running in the test harness, delay a bit after writing a bounce
1032 message to get a bit more predictability in the log output.
1034 4. Added a call to search_tidyup() just before forking a reception process. In
1035 theory, someone could use a lookup in the expansion of smtp_accept_max_
1036 per_host which, without the tidyup, could leave open a database connection.
1038 5. Added the variables $recipient_data and $sender_data which get set from a
1039 lookup success in an ACL "recipients" or "senders" condition, or a router
1040 "senders" option, similar to $domain_data and $local_part_data.
1042 6. Moved the writing of debug_print from before to after the "senders" test
1045 7. Change 4.31/66 (moving the time when the Received: is generated) caused
1046 problems for message scanning, either using a data ACL, or using
1047 local_scan() because the Received: header was not generated till after they
1048 were called (in order to set the time as the time of reception completion).
1049 I have revised the way this works. The header is now generated after the
1050 body is received, but before the ACL or local_scan() are called. After they
1051 are run, the timestamp in the header is updated.
1057 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
1058 before starting a queue runner without re-exec. This happened only when
1059 deliver_drop_privilege was set or when the Exim user was set to root. The
1060 effect of the bug was that timeouts during subsequent deliveries caused
1061 crashes instead of being properly handled. The handler is now left at its
1062 default (and expected) setting.
1064 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
1065 message, again when deliver_drop_privilege is set or Exim is run as root.
1066 The bug described in (1) was not present in this case, but the tidying up
1067 of the other signals was missing. I have made the two cases consistent.
1069 3. The ignore_target_hosts setting on a manualroute router was being ignored
1070 for hosts that were looked up using the /MX notation.
1072 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
1075 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
1076 operated on the sender address. After changing the $sender_address to <>
1077 for the sender address verify, Exim was re-instated it as the original
1078 (before rewriting) address, but remembering that it had rewritten it, so it
1079 wasn't rewriting it again. This bug also had the effect of breaking the
1080 sender address verification caching when the sender address was rewritten.
1082 6. The ignore_target_hosts option was being ignored by the ipliteral router.
1083 This has been changed so that if the ip literal address matches
1084 ignore_target_hosts, the router declines.
1086 7. Added expansion conditions match_domain, match_address, and match_local_
1087 part (NOT match_host).
1089 8. The placeholder for the Received: header didn't have a length field set.
1091 9. Added code to Exim itself and to exim_lock to test for a specific race
1092 condition that could lead to file corruption when using MBX delivery. The
1093 issue is with the lockfile that is created in /tmp. If this file is removed
1094 after a process has opened it but before that process has acquired a lock,
1095 there is the potential for a second process to recreate the file and also
1096 acquire a lock. This could lead to two Exim processes writing to the file
1097 at the same time. The added code performs the same test as UW imapd; it
1098 checks after acquiring the lock that its file descriptor still refers to
1099 the same named file.
1101 10. The buffer for building added header lines was of fixed size, 8192 bytes.
1102 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
1105 11. Added the smtp_active_hostname option. If used, this will typically be made
1106 to depend on the incoming interface address. Because $interface_address is
1107 not set up until the daemon has forked a reception process, error responses
1108 that can happen earlier (such as "too many connections") no longer contain
1111 12. If an expansion in a condition on a "warn" statement fails because a lookup
1112 defers, the "warn" statement is abandoned, and the next ACL statement is
1113 processed. Previously this caused the whole ACL to be aborted.
1115 13. Added the iplsearch lookup type.
1117 14. Added ident_timeout as a log selector.
1119 15. Added tls_certificate_verified as a log selector.
1121 16. Added a global option tls_require_ciphers (compare the smtp transport
1122 option of the same name). This controls incoming TLS connections.
1124 17. I finally figured out how to make tls_require_ciphers do a similar thing
1125 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
1126 before starting the TLS session.
1128 18. Tabs are now shown as \t in -bP output.
1130 19. If the log selector return_path_on_delivery was set, Exim crashed when
1131 bouncing a message because it had too many Received: header lines.
1133 20. If two routers both had headers_remove settings, and the first one included
1134 a superfluous trailing colon, the final name in the first list and the
1135 first name in the second list were incorrectly joined into one item (with a
1136 colon in the middle).
1142 1. Added -C and -D options to the exinext utility, mainly to make it easier
1143 to include in the automated testing, but these could be helpful when
1144 multiple configurations are in use.
1146 2. The exinext utility was not formatting the output nicely when there was
1147 an alternate port involved in the retry record key, nor when there was a
1148 message id as well (for retries that were specific to a specific message
1149 and a specific host). It was also confused by IPv6 addresses, because of
1150 the additional colons they contain. I have fixed the IPv4 problem, and
1151 patched it up to do a reasonable job for IPv6.
1153 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
1154 delivery, the log line now contains "pipelined" if PIPELINING was used.
1156 4. An SMTP transport process used to panic and die if the bind() call to set
1157 an explicit outgoing interface failed. This has been changed; it is now
1158 treated in the same way as a connect() failure.
1160 5. A reference to $sender_host_name in the part of a conditional expansion
1161 that was being skipped was still causing a DNS lookup. This no longer
1164 6. The def: expansion condition was not recognizing references to header lines
1165 that used bh_ and bheader_.
1167 7. Added the _cache feature to named lists.
1169 8. The code for checking quota_filecount in the appendfile transport was
1170 allowing one more file than it should have been.
1172 9. For compatibility with Sendmail, the command line option
1180 and sets the incoming protocol and host name (for trusted callers). The
1181 host name and its colon can be omitted when only the protocol is to be set.
1182 Note the Exim already has two private options, -pd and -ps, that refer to
1183 embedded Perl. It is therefore impossible to set a protocol value of "d" or
1184 "s", but I don't think that's a major issue.
1186 10. A number of refactoring changes to the code, none of which should affect
1189 (a) The number of logging options was getting close to filling up the
1190 32-bit word that was used as a bit map. I have split them into two classes:
1191 those that are passed in the argument to log_write(), and those that are
1192 only ever tested independently outside of that function. These are now in
1193 separate 32-bit words, so there is plenty of room for expansion again.
1194 There is no change in the user interface or the logging behaviour.
1196 (b) When building, for example, log lines, the code previously used a
1197 macro that called string_cat() twice, in order to add two strings. This is
1198 not really sufficiently general. Furthermore, there was one instance where
1199 it was actually wrong because one of the argument was used twice, and in
1200 one call a function was used. (As it happened, calling the function twice
1201 did not affect the overall behaviour.) The macro has been replaced by a
1202 function that can join an arbitrary number of extra strings onto a growing
1205 (c) The code for expansion conditions now uses a table and a binary chop
1206 instead of a serial search (which was left over from when there were very
1207 few conditions). Also, it now recognizes conditions like "pam" even when
1208 the relevant support is not compiled in: a suitably worded error message is
1209 given if an attempt is made to use such a condition.
1211 11. Added ${time_interval:xxxxx}.
1213 12. A bug was causing one of the ddress fields not to be passed back correctly
1214 from remote delivery subprocesses. The field in question was not being
1215 subsequently used, so this caused to problems in practice.
1217 13. Added new log selectors queue_time and deliver_time.
1219 14. Might have fixed a bug in maildirsizefile handling that threw up
1220 "unexpected character" debug warnings, and recalculated the data
1221 unnecessarily. In any case, I expanded the warning message to give more
1224 15. Added the message "Restricted characters in address" to the statements in
1225 the default ACL that block characters like @ and % in local parts.
1227 16. Change 71 for release 4.31 proved to be much less benign that I imagined.
1228 Three changes have been made:
1230 (a) There was a serious bug; a negative response to MAIL caused the whole
1231 recipient domain to be cached as invalid, thereby blocking all messages
1232 to all local parts at the same domain, from all senders. This bug has
1233 been fixed. The domain is no longer cached after a negative response to
1234 MAIL if the sender used is not empty.
1236 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
1239 (c) A new callout option, "use_sender" has been added for people who want
1240 the modified behaviour.
1246 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
1249 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
1250 indeed breaks things for older releases.
1252 3. Added additional logging to the case where there is a problem reading data
1253 from a filter that is running in a subprocess using a pipe, in order to
1254 try to track down a specific problem.
1256 4. Testing facility fudge: when running in the test harness and attempting
1257 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
1258 getting "No route to host". Convert this to a timeout.
1260 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
1263 6. Some OS don't have socklen_t but use size_t instead. This affects the
1264 fifth argument of getsockopt() amongst other things. This is now
1265 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
1266 can be set for individual OS. I have set it for SunOS5, OSF1, and
1267 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
1268 some earlier ones do not.
1270 7. Change 4.30/15 was not doing the test caselessly.
1272 8. The standard form for an IPv6 address literal was being rejected by address
1273 parsing in, for example, MAIL and RCPT commands. An example of this kind of
1274 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1275 this, as well as the form without the "IPv6" on the front (but only when
1276 address literals are enabled, of course).
1278 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
1280 10. Exim crashed if a message with an empty sender address specified by -f
1281 encountered a router with an errors_to setting. This could be provoked only
1282 by a command such as
1286 where an empty string was supplied; "<>" did not hit this bug.
1288 11. Installed PCRE release 4.5.
1290 12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
1291 remained set. It is now erased.
1293 13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
1294 times from message ids (which are base 36 rather than the normal 62).
1296 14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
1297 were being counted as actual protocol errors, and logged if the log
1298 selector +smtp_protocol_error was set. One cannot be perfect in this test,
1299 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
1300 and DATA following a set of rejected RCPTs do not count as protocol errors.
1301 In other words, Exim assumes they were pipelined, though this may not
1302 actually be the case. Of course, in all cases the client gets an
1303 appropriate error code.
1305 15. If a lookup fails in an ACL condition, a message about the failure may
1306 be available; it is used if testing the ACL cannot continue, because most
1307 such messages specify what the cause of the deferral is. However, some
1308 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
1309 that caused an old message to be retained and used if a later statement
1310 caused a defer, replacing the real cause of the deferral.
1312 16. If an IP address had so many PTR records that the DNS lookup buffer
1313 was not large enough to hold them, Exim could crash while trying to process
1314 the truncated data. It now detects and logs this case.
1316 17. Further to 4.21/58, another change has been made: if (and only if) the
1317 first line of a message (the first header line) ends with CRLF, a bare LF
1318 in a subsequent header line has a space inserted after it, so as not to
1319 terminate the header.
1321 18. Refactoring: tidied an ugly bit of code in appendfile that copied data
1322 unnecessarily, used atoi() instead of strtol(), and didn't check the
1323 termination when getting file sizes from file names by regex.
1325 19. Completely re-implemented the support for maildirsize files, in the light
1326 of a number of problems with the previous contributed implementation
1327 (4.30/29). In particular:
1329 . If the quota is zero, the maildirsize file is maintained, but no quota is
1332 . If the maildir directory does not exist, it is created before any attempt
1333 to write a maildirsize file.
1335 . The quota value in the file is just a cache; if the quota is changed in
1336 the transport, the new value overrides.
1338 . A regular expression is available for excluding directories from the
1341 20. The autoreply transport checks the characters in options that define the
1342 message's headers; it allows continued headers, but it was checking with
1343 isspace() after an embedded newline instead of explicitly looking for a
1346 21. If all the "regular" hosts to which an address was routed had passed their
1347 expiry times, and had not reached their retry times, the address was
1348 bounced, even if fallback hosts were defined. Now Exim should go on to try
1351 22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1352 equivalent code in the SMTP transport. Some hosts send humungous responses
1353 to HELO/EHLO, more than 1024 it seems.
1355 23. Refactoring: code in filter.c used (void *) for "any old type" but this
1356 gives compiler warnings in some environments. I've now done it "properly",
1359 24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1360 (because of problems with the built-in one) was declared to return uschar *
1361 instead of char *, causing compiler failure.
1363 25. Fixed a file descriptor leak when processing alias/forward files.
1365 26. Fixed a minor format string issue in dbfn.c.
1367 27. Typo in exim.c: ("dmbnz" for "dbmnz").
1369 28. If a filter file refered to $h_xxx or $message_headers, and the headers
1370 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1373 29. When a sender address is verified, it is cached, to save repeating the test
1374 when there is more than one recipient in a message. However, when the
1375 verification involves a callout, it is possible for different callout
1376 options to be set for different recipients. It is too complicated to keep
1377 track of this in the cache, so now Exim always runs a verification when a
1378 callout is required, relying on the callout cache for the optimization.
1379 The overhead is duplication of the address routing, but this should not be
1382 30. Fixed a bug in callout caching. If a RCPT command caused the sender address
1383 to be verified with callout=postmaster, and the main callout worked but the
1384 postmaster check failed, the verification correctly failed. However, if a
1385 subsequent RCPT command asked for sender verification *without* the
1386 postmaster check, incorrect caching caused this verification also to fail,
1389 31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
1390 it was not caching the DNS options (qualify_single, search_parents) that
1391 were used when the lookup failed. A subsequent lookup with different
1392 options therefore always gave the same answer, though there were cases
1393 where it should not have. (Example: a "domains = !$mx_any" option on a
1394 dnslookup router: the "domains" option is always processed without any
1395 widening, but the router might have qualify_single set.) Now Exim uses the
1396 cached value only when the same options are set.
1398 32. Added John Jetmore's "exipick" utility to the distribution.
1400 33. GnuTLS: When an attempt to start a TLS session fails for any reason other
1401 than a timeout (e.g. a certificate is required, and is not provided), an
1402 Exim server now closes the connection immediately. Previously it waited for
1403 the client to close - but if the client is SSL, it seems that they each
1404 wait for each other, leading to a delay before one of them times out.
1406 34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
1407 maintained 0.8.x compatibility because I don't think many are using it, and
1408 it is clearly obsolete.
1410 35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
1413 36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
1414 client certificate was expired. A simple patch fixes this, though I don't
1415 understand the full logic of why the verify callback is called multiple
1418 37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
1419 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
1420 which causes problems with some clients (such as the Certicom SSL Plus
1421 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
1422 disables the coutermeasure allowing Eudora to connect."
1424 38. Exim was not checking that a write() to a log file succeeded. This could
1425 lead to Bad Things if a log got too big, in particular if it hit a file
1426 size limit. Exim now panics and dies if it cannot write to a log file, just
1427 as it does if it cannot open a log file.
1429 39. Modified OS/Makefile-Linux so that it now contains
1431 CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
1433 The two -D definitions ensure that Exim is compiled with large file
1434 support, which makes it possible to handle log files that are bigger than
1437 40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
1438 instance) a domain was checked against a named list that involved a lookup,
1439 causing $domain_data to be set, then another domain was checked against the
1440 same list, then the first domain was re-checked, the value of $domain_data
1441 after the final check could be wrong. In particular, if the second check
1442 failed, it could be set empty. This bug probably also applied to
1445 41. The strip_trailing_dot option was not being applied to the address given
1446 with the -f command-line option.
1448 42. The code for reading a message's header from the spool was incrementing
1449 $received_count, but never initializing it. This meant that the value was
1450 incorrect (doubled) while delivering a message in the same process in which
1451 it was received. In the most common configuration of Exim, this never
1452 happens - a fresh exec is done - but it can happen when
1453 deliver_drop_privilege is set.
1455 43. When Exim logs an SMTP synchronization error - client data sent too soon -
1456 it now includes up to 150 characters of the unexpected data in the log
1459 44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
1460 and building data strings. The size of both of these buffers was 10 000
1461 bytes - far larger than anybody would *ever* want, thought I. Needless to
1462 say, somebody hit the limit. I have increased the maximum line length to
1463 20 000 and the maximum data length of concatenated lines to 100 000. I have
1464 also fixed two bugs, because there was no checking on these buffers. Tsk,
1465 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
1466 buffer is too small.
1468 45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
1469 lsearch lookups. Now it does.
1471 46. When parsing a route_list item in a manualroute router, a fixed-length
1472 buffer was used for the list of hosts. I made this 1024 bytes long,
1473 thinking that nobody would ever have a list of hosts that long. Wrong.
1474 Somebody had a whole pile of complicated expansion conditions, and the
1475 string was silently truncated, leading to an expansion error. It turns out
1476 that it is easier to change to an unlimited length (owing to other changes
1477 that have happened since this code was originally written) than to build
1478 structure for giving a limitation error. The length of the item that
1479 expands into the list of hosts is now unlimited.
1481 47. The lsearch lookup could not handle data where the length of text line was
1482 more than 4095 characters. Such lines were truncated, leading to shortened
1483 data being returned. It should now handle lines of any length.
1485 48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
1486 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
1489 49. Cosmetic tidy to scripts like exicyclog that are generated by globally
1490 replacing strings such as BIN_DIRECTORY in a source file: the replacement
1491 no longer happens in comment lines. A list of replacements is now placed
1492 at the head of all of the source files, except those whose only change is
1493 to replace PERL_COMMAND in the very first #! line.
1495 50. Replaced the slow insertion sort in queue.c, for sorting the list of
1496 messages on the queue, with a bottom-up merge sort, using code contributed
1497 by Michael Haardt. This should make operations like -bp somewhat faster on
1498 large queues. It won't affect queue runners, except when queue_run_in_order
1501 51. Installed eximstats 1.31 in the distribution.
1503 52. Added support for SRV lookups to the dnslookup router.
1505 53. If an ACL referred to $message_body or $message_body_end, the value was not
1506 reset for any messages that followed in the same SMTP session.
1508 54. The store-handling optimization for building very long strings was not
1509 differentiating between the different store pools. I don't think this
1510 actually made any difference in practice, but I've tidied it.
1512 55. While running the routers to verify a sender address, $sender_address
1513 was still set to the sender address. This is wrong, because when routing to
1514 send a bounce to the sender, it would be empty. Therefore, I have changed
1515 it so that, while verifying a sender address, $sender_address is set to <>.
1516 (There is no change to what happens when verifying a recipient address.)
1518 56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
1519 target A or AAAA records (if not already returned) without resetting the
1520 qualify_single or search_parents options of the DNS resolver. These are
1521 inappropriate in this case because the targets of MX and SRV records must
1522 be FQDNs. A broken DNS record could cause trouble if it happened to have a
1523 target that, when qualified, matched something in the local domain. These
1524 two options are now turned off when doing these lookups.
1526 57. It seems that at least some releases of Reiserfs (which does not have the
1527 concept of a fixed number of inodes) returns zero and not -1 for the
1528 number of available inodes. This interacted badly with check_spool_inodes,
1529 which assumed that -1 was the "no such thing" setting. What I have done is
1530 to check that the total number of inodes is greater than zero before doing
1531 the test of how many are available.
1533 58. When a "warn" ACL statement has a log_message modifier, the message is
1534 remembered, and not repeated. This is to avoid a lot of repetition when a
1535 message has many recipients that cause the same warning to be written.
1536 Howewer, Exim was preserving the list of already written lines for an
1537 entire SMTP session, which doesn't seem right. The memory is now reset if a
1538 new message is started.
1540 59. The "rewrite" debugging flag was not showing the result of rewriting in the
1541 debugging output unless log_rewrite was also set.
1543 60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
1544 of (int)(handle) when we know that handle contains (void *)(-1).
1546 61. The Exim daemon panic-logs an error return when it closes the incoming
1547 connection. However "connection reset by peer" seems to be common, and
1548 isn't really an error worthy of noting specially, so that particular error
1551 62. When Exim is trying to find all the local interfaces, it used to panic and
1552 die if the ioctl to get the interface flags failed. However, it seems that
1553 on at least one OS (Solaris 9) it is possible to have an interface that is
1554 included in the list of interfaces, but for which you get a failure error
1555 for this call. This happens when the interface is not "plumbed" into a
1556 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
1557 failure of the "get flags" call assumes that the interface is down.
1559 63. Added a ${eval10: operator, which assumes all numbers are decimal. This
1560 makes life easier for people who are doing arithmetic on fields extracted
1561 from dates, where you often get leading zeros that should not be
1562 interpreted as octal.
1564 64. Added qualify_domain to the redirect router, to override the global
1567 65. If a pathologically long header line contained very many addresses (the
1568 report of this problem mentioned 10 000) and each of them was rewritten,
1569 Exim could use up a very large amount of memory. (It kept on making new
1570 copies of the header line as it rewrote, and never released the old ones.)
1571 At the expense of a bit more processing, the header rewriting function has
1572 been changed so that it no longer eats memory in this way.
1574 66. The generation of the Received: header has been moved from the time that a
1575 message starts to be received, to the time that it finishes. The timestamp
1576 in the Received: header should now be very close to that of the <= log
1577 line. There are two side-effects of this change:
1579 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
1580 logged header lines no longer include the local Received: line, because
1581 it has not yet been created. The same applies to a copy of the message
1582 that is returned to a non-SMTP sender when a message is rejected.
1584 (b) When a filter file is tested using -bf, no additional Received: header
1585 is added to the test message. After some thought, I decided that this
1588 This change does not affect the value of $received_for. It is still set
1589 after address rewriting, but before local_scan() is called.
1591 67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
1593 68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
1594 gave an unhelpful panic error message, and a defer error. I have managed to
1595 change this behaviour so that it now rejects any supplied certificate,
1596 which seems right, as the list of acceptable certificates is empty.
1598 69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
1599 gave an unhelpful defer error. I have not managed to make this reject any
1600 supplied certificates, but the error message it gives is "no certificate
1601 supplied", which is not helpful.
1603 70. exigrep's output now also includes lines that are not associated with any
1604 message, but which match the given pattern. Implemented by a patch from
1605 Martin Sluka, which also tidied up the Perl a bit.
1607 71. Recipient callout verification, like sender verification, was using <> in
1608 the MAIL FROM command. This isn't really the right thing, since the actual
1609 sender may affect whether the remote host accepts the recipient or not. I
1610 have changed it to use the actual sender in the callout; this means that
1611 the cache record is now keyed on a recipient/sender pair, not just the
1612 recipient address. There doesn't seem to be a real danger of callout loops,
1613 since a callout by the remote host to check the sender would use <>.
1614 [SEE ABOVE: changed after hitting problems.]
1616 72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
1617 temporary errors. However, in the case of such a code being given after
1618 the end of a data transmission (i.e. after ".") Exim was failing to write
1619 a retry record for the message. (Yes, there was some broken host that was
1620 actually sending 8xx at this point.)
1622 73. An unknown lookup type in a host list could cause Exim to panic-die when
1623 the list was checked. (An example that provoked this was putting <; in the
1624 middle of a list instead of at the start.) If this happened during a DATA
1625 ACL check, a -D file could be left lying around. This kind of configuration
1626 error no longer causes Exim to die; instead it causes a defer errror. The
1627 incident is still logged to the main and panic logs.
1629 74. Buglet left over from Exim 3 conversion. The message "too many messages
1630 in one connection" was written to the rejectlog but not the mainlog, except
1631 when address rewriting (yes!) was being logged.
1633 75. Added write_rejectlog option.
1635 76. When a system filter was run not as root (that is, when system_filter_user
1636 was set), the values of the $n variables were not being returned to the
1637 main process; thus, they were not subsequently available in the $sn
1640 77. Added +return_path_on_delivery log selector.
1642 78. A connection timeout was being treated differently from recipients deferred
1643 when testing hosts_max_try with a message that was older than the host's
1644 retry timeout. (The host should not be counted, thus allowing all hosts to
1645 be tried at least once before bouncing.) This may have been the cause of an
1646 occasionally reported bug whereby a message would remain on the queue
1647 longer than the retry timeout, but would be bounced if a delivery was
1648 forced. I say "may" because I never totally pinned down the problem;
1649 setting up timeout/retry tests is difficult. See also the next item.
1651 79. The ultimate address timeout was not being applied to errors that involved
1652 a combination of host plus message (for example, a timeout on a MAIL
1653 command). When an address resolved to a number of possible hosts, and they
1654 were not all tried for each delivery (e.g. because of hosts_max_try), a
1655 message could remain on the queue longer than the retry timeout.
1657 80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
1660 81. Fixed an obscure SMTP outgoing bug which required at least the following
1661 conditions: (a) there was another message waiting for the same server;
1662 (b) the server returned 5xx to all RCPT commands in the first message so
1663 that the message was not completed; (c) the server dropped the connection
1664 or gave a negative response to the RSET that Exim sends to abort the
1665 transaction. The observed case was a dropped connection after DATA that had
1666 been sent in pipelining mode. That is, the server had advertised PIPELINING
1667 but was not implementing it correctly. The effect of the bug was incorrect
1668 behaviour, such as trying another host, and this could lead to a crash.
1674 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
1675 and daemon.c were passed as pointers to ints; they should have been
1676 pointers to socklen_t variables (which are typically unsigned ints).
1678 2. Some signed/unsigned type warnings in the os.c file for Linux have been
1681 3. Fixed a really odd bug that affected only the testing scheme; patching a
1682 certain fixed string in the binary changed the value of another string that
1683 happened to be identical to the end of the original first string.
1685 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
1686 name", it returns that address as the IP address. On some operating
1687 systems (e.g. Solaris), it also passes back the IP address string as the
1688 "host name". However, on others (e.g. Linux), it passes back an empty
1689 string. Exim wasn't checking for this, and was changing the host name to an
1690 empty string, assuming it had been canonicized.
1692 5. Although rare, it is permitted to have more than one PTR record for a given
1693 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
1694 all the names associated with an address, because they do in Solaris.
1695 However, it seems that they do not in Linux for data that comes from the
1696 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
1697 I found this out when I moved to a new Linux workstation and tried to run
1698 the Exim test suite.
1700 To get round this problem I have changed the code so that it now does its
1701 own call to the DNS to look up PTR records when searching for a host name.
1702 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
1703 addresses that are only in /etc/hosts are still found.
1705 This behaviour is, however, controlled by an option called host_lookup_
1706 order, which defaults to "bydns:byaddr". If people want to use the other
1707 order, or indeed, just use one or the other means of lookup, they can
1708 specify it in this variable.
1710 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
1711 some operating systems, this comes back from gethostbyaddr() as an empty
1712 string, and this is what Exim used to test for. However, it seems that in
1713 other systems, "." is yielded. Exim now tests for this case too.
1715 7. The values of check_spool_space and check_log_space are now held internally
1716 as a number of kilobytes instead of an absolute number of bytes. If a
1717 numbers is specified without 'K' or 'M', it is rounded up to the nearest
1718 kilobyte. This means that much larger values can be stored.
1720 8. Exim monitor: an attempt to get the action menu when not actually pointing
1721 at a message produces an empty menu entitled "No message selected". This
1722 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
1723 no entries in it ("Shell widget menu has zero width and/or height"). So I
1724 have added a single, blank menu entry in this case.
1726 9. Added ${quote_local_part.
1728 10. MIME decoding is now applied to the contents of Subject: header lines when
1731 11. Now that a reference to $sender_host_address automatically causes a reverse
1732 lookup to occur if necessary (4.13/18), there is no need to arrange for a
1733 host lookup before query-style lookups in lists that might use this
1734 variable. This has therefore been abolished, and the "net-" prefix is no
1735 longer necessary for query-style lookups.
1737 12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
1738 have been a typo for LFLAGS, so it has been changed.
1740 13. The install script calls Exim with "-C /dev/null" in order to find the
1741 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
1742 to be output. Howeve, since Exim outputs its version number before the
1743 error, it didn't break the script. It just looked ugly. I fixed this by
1744 always allowing "-C /dev/null" if the caller is root.
1746 14. Ignore overlarge ACL variable number when reading spool file - insurance
1747 against a later release with more variables having written the file.
1749 15. The standard form for an IPv6 address literal was being rejected by EHLO.
1750 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1751 this, as well as the form without the "IPv6" on the front.
1753 16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
1754 OS/Makefile-Darwin file.
1756 17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
1757 only to LDAP libraries that do not have LDAP_OPT_DEREF.
1759 18. After change 4.21/52, "%ld" was used to format the contents of the $inode
1760 variable. However, some OS use ints for inodes. I've added cast to long int
1761 to get rid of the compiler warning.
1763 19. I had forgotten to lock out "/../" in configuration file names when
1764 ALT_CONFIG_PREFIX was set.
1766 20. Routers used for verification do not need to specify transports. However,
1767 if such a router generated a host list, and callout was configured, Exim
1768 crashed, because it could not find a port number from the (non-existent)
1769 transport. It now assumes port 25 in this circumstance.
1771 21. Added the -t option to exigrep.
1773 22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
1774 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
1775 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
1776 them is set, LOOKUP_LSEARCH is forced.
1778 23. "exim -bV" now outputs a list of lookups that are included in the binary.
1780 24. Added sender and host information to the "rejected by local_scan()" log
1781 line; previously there was no indication of these.
1783 25. Added .include_if_exists.
1785 26. Change 3.952/11 added an explicit directory sync on top of a file sync for
1786 Linux. It turns out that not all file systems support this. Apparently some
1787 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
1788 do it.) To cope with this, the error EINVAL, which means that sync-ing is
1789 not supported on the file descriptor, is now ignored when Exim is trying to
1790 sync a directory. This applies only to Linux.
1792 27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
1794 28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
1795 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
1798 29. Added support for maildirsize files from supplied patch (modified a bit).
1800 30. The use of :fail: followed by an empty string could lead Exim to respond to
1801 sender verification failures with (e.g.):
1803 550 Verification failed for <xxx>
1804 550 Sender verify failed
1806 where the first response line was missing the '-' that indicates it is not
1807 the final line of the response.
1809 31. The loop for finding the name of the user that called Exim had a hardwired
1810 limit of 10; it now uses the value of finduser_retries, which is used for
1811 all other user lookups.
1813 32. Added $received_count variable, available in data and not_smtp ACLs, and at
1816 33. Exim was neglecting to zero errno before one call of strtol() when
1817 expanding a string and expecting an integer value. On some systems this
1818 resulted in spurious "integer overflow" errors. Also, it was casting the
1819 result into an int without checking.
1821 34. Testing for a connection timeout using "timeout_connect" in the retry rules
1822 did not work. The code looks as if it has *never* worked, though it appears
1823 to have been documented since at least releast 1.62. I have made it work.
1825 35. The "timeout_DNS" error in retry rules, also documented since at least
1826 1.62, also never worked. As it isn't clear exactly what this means, and
1827 clearly it isn't a major issue, I have abolished the feature by treating it
1828 as "timeout", and writing a warning to the main and panic logs.
1830 36. The display of retry rules for -brt wasn't always showing the error code
1833 37. Added new error conditions to retry rules: timeout_A, timeout_MX,
1834 timeout_connect_A, timeout_connect_MX.
1836 38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
1837 to the empty sender.
1839 39. The daemon was not analysing the content of -oX till after it had closed
1840 stderr and disconnected from the controlling terminal. This meant that any
1841 syntax errors were only noted on the panic log, and the return code from
1842 the command was 0. By re-arranging the code a little, I've made the
1843 decoding happen first, so such errors now appear on stderr, and the return
1844 code is 1. However, the actual setting up of the sockets still happens in
1845 the disconnected process, so errors there are still only recorded on the
1848 40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
1849 connections (as happens on some IP stacks) was logged at start up time as
1850 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
1851 it from "IPv6 and IPv4", which means that two separate sockets are being
1854 41. The debug output for gethostbyname2() or getipnodebyname() failures now
1855 says whether AF_INET or AF_INET6 was passed as an argument.
1857 42. Exiwhat output was messed up when time zones were included in log
1860 43. Exiwhat now gives more information about the daemon's listening ports,
1861 and whether -tls-on-connect was used.
1863 44. The "port" option of the smtp transport is now expanded.
1865 45. A "message" modifier in a "warn" statement in a non-message ACL was being
1866 silently ignored. Now an error message is written to the main and panic
1869 46. There's a new ACL modifier called "logwrite" which writes to a log file
1870 as soon as it is encountered.
1872 47. Added $local_user_uid and $local_user_gid at routing time.
1874 48. Exim crashed when trying to verify a sender address that was being
1877 49. Exim was recognizing only a space character after ".include". It now also
1878 recognizes a tab character.
1880 50. Fixed several bugs in the Perl script that creates the exim.8 man page by
1881 extracting the relevant information from the specification. The man page no
1882 longer contains scrambled data for the -d option, and I've added a section
1883 at the front about calling Exim under different names.
1885 51. Added "extra_headers" argument to the "mail" command in filter files.
1887 52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
1890 53. Installed eximstats 1.29.
1892 54. Added transport_filter_timeout as a generic transport option.
1894 55. Exim no longer adds an empty Bcc: header to messages that have no To: or
1895 Cc: header lines. This was required by RFC 822, but it not required by RFC
1898 56. Exim used to add From:, Date:, and Message-Id: header lines to any
1899 incoming messages that did not have them. Now it does so only if the
1900 message originates locally, that is, if there is no associated remote host
1901 address. When Resent- header lines are present, this applies to the Resent-
1902 lines rather than the non-Resent- lines.
1904 57. Drop incoming SMTP connection after too many syntax or protocol errors. The
1905 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
1907 58. Messages for configuration errors now include the name of the main
1908 configuration file - useful now that there may be more than one file in a
1909 list (.included file names were always shown).
1911 59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
1912 for those rare installations that do not start the daemon as root or run it
1913 setuid root. I've cut out the call to initgroups() if the daemon is not
1916 60. The Exim user and group can now be bound into the binary as text strings
1917 that are looked up at the start of Exim's processing.
1919 61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
1921 62. Added $mailstore_basename variable.
1923 63. Installed patch to sieve.c from Michael Haardt.
1925 64. When Exim failed to open the panic log after failing to open the main log,
1926 the original message it was trying to log was written to stderr and debug
1927 output, but if they were not available (the usual case in production), it
1928 was lost. Now it is written to syslog before the two lines that record the
1929 failures to open the logs.
1931 65. Users' Exim filters run in subprocesses under the user's uid. It is
1932 possible for a "deliver" command or an alias in a "personal" command to
1933 provoke an address rewrite. If logging of address rewriting is configured,
1934 this fails because the process is not running as root or exim. There may be
1935 a better way of dealing with this, but for the moment (because 4.30 needs
1936 to be released), I have disabled address rewrite logging when running a
1937 filter in a non-root, non-exim process.
1943 1. The buildconfig auxiliary program wasn't quoting the value set for
1944 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
1945 not defined. This bug was masked in 4.22 by the effect that was fixed in
1948 2. Some messages that were rejected after a message id was allocated were
1949 shown as "incomplete" by exigrep. It no longer does this for messages that
1950 are rejected by local_scan() or the DATA or non-SMTP ACLs.
1952 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
1953 have allow_domain_literals set, the ID did not get logged in the <= line.
1954 Domain literals are now always recognized in Message-ID: header lines.
1956 4. The first argument for a ${extract expansion item is the key name or field
1957 number. Leading and trailing spaces in this item were not being ignored,
1958 causing some misleading effects.
1960 5. When deliver_drop_privilege was set, single queue runner processes started
1961 manually (i.e. by the command "exim -q") or by the daemon (which uses the
1962 same command in the process it spins off) were not dropping privilege.
1964 6. When the daemon running as "exim" started a queue runner, it always
1965 re-executed Exim in the spun-off process. This is a waste of effort when
1966 deliver_drop_privilege is set. The new process now just calls the
1967 queue-runner function directly.
1973 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
1976 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
1977 ignored. Though the use of -oP was forcing the writing of a pid file, it
1978 was always written to the default place.
1980 3. If the message "no IP address found for host xxxx" is generated during
1981 incoming verification, it is now followed by identification of the incoming
1982 connection (so you can more easily find what provoked it).
1984 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
1986 5. Added some features to "harden" Exim a bit more against certain attacks:
1988 (a) There is now a build-time option called FIXED_NEVER_USERS that can
1989 be put in Local/Makefile. This is like the never_users runtime option,
1990 but it cannot be overridden. The default setting is "root".
1992 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
1993 prefix string with which any file named in a -C command line option
1996 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
1997 is retained for -C and -D only if the caller of Exim is root. Without
1998 it, the exim user may also use -C and -D and retain privilege.
2000 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
2001 command line option is disabled.
2003 6. Macro names set by the -D option must start with an upper case letter, just
2004 like macro names defined in the configuration file.
2006 7. Added "dereference=" facility to LDAP.
2008 8. Two instances of the typo "uknown" in the source files are fixed.
2010 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
2011 the Configure-Makefile script screwed up while processing it.
2013 10. Incorporated PCRE 4.4.
2015 11. The SMTP synchronization check was not operating right at the start of an
2016 SMTP session. For example, it could not catch a HELO sent before the client
2017 waited for the greeting. There is now a check for outstanding input at the
2018 point when the greeting is written. Because of the duplex, asynchronous
2019 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
2020 way, but not yet received, when the check is performed.
2022 12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
2023 on TCP/IP sockets, because this apparently causes some broken clients to
2026 13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
2027 unchanged) from the Cygwin maintainer.
2029 14. The code for -bV that shows what is in the binary showed "mbx" when maildir
2030 was supported instead of testing for mbx. Effectively a typo.
2032 15. The spa authenticator server code was not checking that the input it
2033 received was valid base64.
2035 16. The debug output line for the "set" modifier in ACLs was not showing the
2036 name of the variable that was being set.
2038 17. Code tidy: the variable type "vtype_string" was never used. Removed it.
2040 18. Previously, a reference to $sender_host_name did not cause a DNS reverse
2041 lookup on its own. Something else was needed to trigger the lookup. For
2042 example, a match in host_lookup or the need for a host name in a host list.
2043 Now, if $sender_host_name is referenced and the host name has not yet been
2044 looked up, a lookup is performed. If the lookup fails, the variable remains
2045 empty, and $host_lookup_failed is set to "1".
2047 19. Added "eqi" as a case-independent comparison operator.
2049 20. The saslauthd authentication condition could segfault if neither service
2050 nor realm was specified.
2052 21. If an overflowing value such as "2048M" was set for message_size_limit, the
2053 error message that was logged was misleading, and incoming SMTP
2054 connections were dropped. The message is now more accurate, and temporary
2055 errors are given to SMTP connections.
2057 22. In some error situations (such as 21 above) Exim rejects all SMTP commands
2058 (except RSET) with a 421 error, until QUIT is received. However, it was
2059 failing to send a response to QUIT.
2061 23. The HELO ACL was being run before the code for helo_try_verify_hosts,
2062 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
2063 ACL is now run after the helo_try_verify_hosts code.
2065 24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
2066 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
2067 case-independent, so other case variants are also recognized). Apparently
2068 some systems use these upper case variants.
2070 25. If more than two messages were waiting for the same host, and a transport
2071 filter was specified for the transport, Exim sent two messages over the
2072 same TCP/IP connection, and then failed with "socket operation on non-
2073 socket" when it tried to send the third.
2075 26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
2077 27. The extern definition of crypt16() in expand.c was not being excluded when
2078 the OS had its own crypt16() function.
2080 28. Added bounce_return_body as a new option, and bounce_return_size_limit
2081 as a preferred synonym for return_size_limit, both as an option and as an
2084 29. Added LIBS=-liconv to OS/Makefile-OSF1.
2086 30. Changed the default configuration ACL to relax the local part checking rule
2087 for addresses that are not in any local domains. For these addresses,
2088 slashes and pipe symbols are allowed within local parts, but the sequence
2089 /../ is explicitly forbidden.
2091 31. SPA server authentication was not clearing the challenge buffer before
2094 32. log_message in a "warn" ACL statement was writing to the reject log as
2095 well as to the main log, which contradicts the documentation and doesn't
2096 seem right (because no rejection is happening). So I have stopped it.
2098 33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
2099 However, I am unable to do any testing of this.
2101 34. Fixed an infelicity in the appendfile transport. When checking directories
2102 for a mailbox, to see if any needed to be created, it was accidentally
2103 using path names with one or more superfluous leading slashes; tracing
2104 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
2106 35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
2107 contents are added to the log line that is written for every discarded
2108 recipient. (Previously a log_message setting was ignored.)
2110 36. The ${quote: operator now quotes the string if it is empty.
2112 37. The install script runs exim in order to find its version number. If for
2113 some reason other than non-existence or emptiness, which it checks, it
2114 could not run './exim', it was installing it with an empty version number,
2115 i.e. as "exim-". This error state is now caught, and the installation is
2118 38. An argument was missing from the function that creates an error message
2119 when Exim fails to connect to the socket for saslauthd authentication.
2120 This could cause Exim to crash, or give a corrupted message.
2122 39. Added isip, isip4, and isip6 to ${if conditions.
2124 40. The ACL variables $acl_xx are now saved with the message, and can be
2125 accessed later in routers, transports, and filters.
2127 41. The new lookup type nwildlsearch is like wildlsearch, except that the key
2128 strings in the file are not string-expanded.
2130 42. If a MAIL command specified a SIZE value that was too large to fit into an
2131 int variable, the check against message_size_limit failed. Such values are
2132 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
2133 day this will have to be increased, but I don't think I want to be around
2134 when emails are that large.
2141 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
2142 iconv() is not standard in FreeBSD.
2144 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
2145 IPv6 enabled. The observed symptom was a segmentation fault on return from
2146 the function os_common_find_running_interfaces() in src/os.c.
2148 3. In the check_special_case() function in daemon.c I had used "errno" as an
2149 argument name, which causes warnings on some systems. This was basically a
2150 typo, since it was named "eno" in the comments!
2152 4. The code that waits for the clock to tick (at a resolution of some fraction
2153 of a second) so as to ensure message-id uniqueness was always waiting for
2154 at least one whole tick, when it could have waited for less. [This is
2155 almost certainly not relevant at current processor speeds, where it is
2156 unlikely to ever wait at all. But we try to future-proof.]
2158 5. The function that sleeps for a time interval that includes fractions of a
2159 second contained a race. It did not block SIGALRM between setting the
2160 timer, and suspending (a couple of lines later). If the interval was short
2161 and the sigsuspend() was delayed until after it had expired, the suspension
2162 never ended. On busy systems this could lead to processes getting stuck for
2165 6. Some uncommon configurations may cause a lookup to happen in a queue runner
2166 process, before it forks any delivery processes. The open lookup caching
2167 mechanism meant that the open file or database connection was passed into
2168 the delivery process. The problem was that delivery processes always tidy
2169 up cached lookup data. This could cause a problem for the next delivery
2170 process started by the queue runner, because the external queue runner
2171 process does not know about the closure. So the next delivery process
2172 still has data in the lookup cache. In the case of a file lookup, there was
2173 no problem because closing a file descriptor in a subprocess doesn't affect
2174 the parent. However, if the lookup was caching a connection to a database,
2175 the connection was closed, and the second delivery process was likely to
2176 see errors such as "PGSQL: query failed: server closed the connection
2177 unexpectedly". The problem has been fixed by closing all cached lookups
2178 in a queue runner before running a delivery process.
2180 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
2181 seem to have the "const" qualifier which it has on other OS. I've
2184 8. Change 4.21/2 was too strict. It is only if there are two authenticators
2185 *of the same type* (client or server) with the same public name that an
2186 error should be diagnosed.
2188 9. When Exim looked up a host name for an IP address, but failed to find the
2189 original IP address when looking up the host name (a safety check), it
2190 output the message "<ip address> does not match any IP for NULL", which was
2191 confusing, to say the least. The bug was that the host name should have
2192 appeared instead of "NULL".
2194 10. Since release 3.03, if Exim is called by a uid other than root or the Exim
2195 user that is built into the binary, and the -C or -D options is used, root
2196 privilege is dropped before the configuration file is read. In addition,
2197 logging is switched to stderr instead of the normal log files. If the
2198 configuration then re-defines the Exim user, the unprivileged environment
2199 is probably not what is expected, so Exim logs a panic warning message (but
2202 However, if deliver_drop_privilege is set, the unprivileged state may well
2203 be exactly what is intended, so the warning has been cut out in that case,
2204 and Exim is allowed to try to write to its normal log files.
2210 1. smtp_return_error_details was not giving details for temporary sender
2211 or receiver verification errors.
2213 2. Diagnose a configuration error if two authenticators have the same public
2216 3. Exim used not to create the message log file for a message until the first
2217 delivery attempt. This could be confusing when incoming messages were held
2218 for policy or load reasons. The message log file is now created at the time
2219 the message is received, and an initial "Received" line is written to it.
2221 4. The automatically generated man page for command line options had a minor
2222 bug that caused no ill effects; however, a more serious problem was that
2223 the procedure for building the man page automatically didn't always
2224 operate. Consequently, release 4.20 contains an out-of-date version. This
2225 shouldn't happen again.
2227 5. When building Exim with embedded Perl support, the script that builds the
2228 Makefile was calling 'perl' to find its compile-time parameters, ignoring
2229 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
2231 6. The freeze_tell option was not being used for messages that were frozen on
2232 arrival, either by an ACL or by local_scan().
2234 7. Added the smtp_incomplete_transaction log selector.
2236 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
2237 was accepting AUTH without a new EHLO.
2239 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
2240 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
2243 10. Logging of TCP/IP connections (when configured) now happens in the main
2244 daemon process instead of the child process, so that the TCP/IP connection
2245 count is more accurate (but it can never be perfect).
2247 11. The use of "drop" in a nested ACL was not being handled correctly in the
2248 outer ACL. Now, if condition failure induced by the nested "drop" causes
2249 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
2250 or "require"), the connection is dropped.
2252 12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
2253 that yield "discard" can now be used with an "accept" or a "discard" verb,
2254 but an error is generated for any others (because I can't see a useful way
2255 to define what should happen).
2257 13. When an ACL is read dynamically from a file (or anywhere else), the lines
2258 are now processed in the same way as lines in the Exim configuration file.
2259 In particular, continuation lines are supported.
2261 14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
2263 15. Added -ti meaning -t -i.
2265 16. Check for letters, digits, hyphens, and dots in the names of dnslist
2266 domains, and warn by logging if others are found.
2268 17. At least on BSD, alignment is not guarenteed for the array of ifreq's
2269 returned from GIFCONF when Exim is trying to find the list of interfaces on
2270 a host. The code in os.c has been modified to copy each ifreq to an aligned
2271 structure in all cases.
2273 Also, in some cases, the returned ifreq's were being copied to a 'struct
2274 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
2275 means the last couple of bytes of an IPv6 address could be chopped if the
2276 ifreq contained only a normal sockaddr (14 bytes storage).
2278 18. Named domain lists were not supported in the hosts_treat_as_local option.
2279 An entry such as +xxxx was not recognized, and was treated as a literal
2282 19. Ensure that header lines added by a DATA ACL are included in the reject log
2283 if the ACL subsequently rejects the message.
2285 20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
2286 MD5 (which is deprecated).
2288 21. When testing a filter file using -bf, Exim was writing a message when it
2289 took the sender from a "From " line in the message, but it was not doing so
2290 when it took $return_path from a Return-Path: header line. It now does.
2292 22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
2293 with a valid header line field name (a series of printing characters
2294 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
2296 23. Changed "disc" in the source to "disk" to conform to the documentation and
2297 the book and for uniformity.
2299 24. Ignore Sendmail's -Ooption=value command line item.
2301 25. When execve() failed while trying to run a command in a pipe transport,
2302 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
2303 could be confused with a return value of 69 from the command itself. This
2304 has been changed to 127, the value the shell returns if it is asked to run
2305 a non-existent command. The wording for the related log line suggests a
2306 non-existent command as the problem.
2308 26. If received_header_text expands to an empty string, do not add a Received:
2309 header line to the message. (Well, it adds a token one on the spool, but
2310 marks it "old" so that it doesn't get used or transmitted.)
2312 27. Installed eximstats 1.28 (addition of -nt option).
2314 28. There was no check for failure on the call to getsockname() in the daemon
2315 code. This can fail if there is a shortage of resources on the system, with
2316 ENOMEM, for example. A temporary error is now given on failure.
2318 29. Contrary to the C standard, it seems that in some environments, the
2319 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
2320 program. Exim now does this explicitly; it affects the formatting of
2321 timestamps using strftime().
2323 30. If exiqsumm was given junk data, it threw up some uninitialized variable
2324 complaints. I've now initialized all the variables, to avoid this.
2326 32. Header lines added by a system filter were not being "seen" during
2327 transport-time rewrites.
2329 33. The info_callback() function passed to OpenSSL is set up with type void
2330 (*)(SSL *, int, int), as described somewhere. However, when calling the
2331 function (actually a macro) that sets it up, the type void(*)() is
2332 expected. I've put in a cast to prevent warnings from picky compilers.
2334 34. If a DNS black list lookup found a CNAME record, but there were no A
2335 records associated with the domain it pointed at, Exim crashed.
2337 35. If a DNS black list lookup returned more than one A record, Exim ignored
2338 all but the first. It now scans all returned addresses if a particular IP
2339 value is being sought. In this situation, the contents of the
2340 $dnslist_value variable are a list of all the addresses, separated by a
2343 36. Tightened up the rules for host name lookups using reverse DNS. Exim used
2344 to accept a host name and all its aliases if the forward lookup for any of
2345 them yielded the IP address of the incoming connection. Now it accepts only
2346 those names whose forward lookup yields the correct IP address. Any other
2347 names are discarded. This closes a loophole whereby a rogue DNS
2348 administrator could create reverse DNS records to break through a
2349 wildcarded host restriction in an ACL.
2351 37. If a user filter or a system filter that ran in a subprocess used any of
2352 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2353 the wrong values were passed to the pipe command ($thisaddress had the
2354 value of $0, $0 had the value of $1, etc). This bug was introduced by
2355 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
2357 38. Improved the line breaking for long SMTP error messages from ACLs.
2358 Previously, if there was no break point between 40 and 75 characters, Exim
2359 left the rest of the message alone. Two changes have been made: (a) I've
2360 reduced the minimum length to 35 characters; (b) if it can't find a break
2361 point between 35 and 75 characters, it looks ahead and uses the first one
2362 that it finds. This may give the occasional overlong line, but at least the
2363 remaining text gets split now.
2365 39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2366 file descriptors might be low, and that setting 1000 would always raise it.
2367 It turns out that in some environments, the limit is already over 1000 and
2368 that lowering it causes trouble. So now Exim takes care not to decrease it.
2370 40. When delivering a message, the value of $return_path is set to $sender_
2371 address at the start of routing (routers may change the value). By an
2372 oversight, this default was not being set up when an address was tested by
2373 -bt or -bv, which affected the outcome if any router or filter referred to
2376 41. The idea of the "warn" ACL verb is that it adds a header or writes to the
2377 log only when "message" or "log_message" are set. However, if one of the
2378 conditions was an address verification, or a call to a nested ACL, the
2379 messages generated by the underlying test were being passed through. This
2380 no longer happens. The underlying message is available in $acl_verify_
2381 message for both "message" and "log_message" expansions, so it can be
2382 passed through if needed.
2384 42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2385 new expansion $bh_ to give the encoded byte string without charset
2386 translation. Translation happens only if iconv() is available; HAVE_ICONV
2387 indicates this at build time. HEADERS_CHARSET gives the charset to
2388 translate to; headers_charset can change it in the configuration, and
2389 "headers charset" can change it in an individual filter file.
2391 43. Now that we have a default RFC 2047 charset (see above), the code in Exim
2392 that creates RFC 2047 encoded "words" labels them as that charset instead
2393 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
2394 expansion operator; (ii) when Exim creates a From: line for a local
2395 message; (iii) when a header line is rewritten to include a "phrase" part.
2397 44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
2398 buggy, causing it to skip the first lines of messages whose message ID
2399 ended in 'D'. This would not have bitten before Exim release 4.14, because
2400 message IDs were unlikely to end in 'D' before then. The effect was to have
2401 incorrect size information for certain domains.
2403 45. #include "config.h" was missing at the start of the crypt16.c module. This
2404 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
2407 46. If there was a timeout during a "random" callout check, Exim treated it as
2408 a failure of the random address, and carried on sending RSET and the real
2409 address. If the delay was just some slowness somewhere, the response to the
2410 original RCPT would be taken as a response to RSET and so on, causing
2411 mayhem of various kinds.
2413 47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
2414 when I implemented it. It didn't allow for the fact that some option values
2415 may legitimatetly be negative (e.g. size_addition), and it didn't even do
2416 the right test for positive values.
2418 48. Domain names in DNS records are case-independent. Exim always looks them up
2419 in lower case. Some resolvers return domain names in exactly the case they
2420 appear in the zone file, that is, they may contain uppercase letters. Not
2421 all resolvers do this - some return always lower case. Exim was treating a
2422 change of case by a resolver as a change of domain, similar to a widening
2423 of a domain abbreviation. This triggered its re-routing code and so it was
2424 trying to route what was effectively the same domain again. This normally
2425 caused routing to fail (because the router wouldn't handle the domain
2426 twice). Now Exim checks for this case specially, and just changes the
2427 casing of the domain that it ultimately uses when it transmits the message
2430 49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
2433 50. If a filter generated a file delivery with a non-absolute name (possible if
2434 no home directory exists for the router), the forbid_file option was not
2437 51. Added '&' feature to dnslists, to provide bit mask matching in addition to
2438 the existing equality matching.
2440 52. Exim was using ints instead of ino_t variables in some places where it was
2441 dealing with inode numbers.
2443 53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
2444 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
2445 called TMPDIR, and if it finds it is different, it changes its value.
2447 54. The smtp_printf() function is now made available to local_scan() so
2448 additional output lines can be written before returning. There is also an
2449 smtp_fflush() function to enable the detection of a dropped connection.
2450 The variables smtp_input and smtp_batched_input are exported to
2453 55. Changed the default runtime configuration: the message "Unknown user"
2454 has been removed from the ACL, and instead placed on the localuser router,
2455 using the cannot_route_message feature. This means that any verification
2456 failures that generate their own messages won't get overridden. Similarly,
2457 the "Unrouteable address" message that was in the ACL for unverifiable
2458 relay addresses has also been removed.
2460 56. Added hosts_avoid_esmtp to the smtp transport.
2462 57. The exicyclog script was not checking for the esoteric option
2463 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
2464 will work only if exicyclog is run under the appropriate euid.
2466 58. Following a discussion on the list, the rules by which Exim recognises line
2467 endings on incoming messages have been changed. The -dropcr and drop_cr
2468 options are now no-ops, retained only for backwards compatibility. The
2469 following line terminators are recognized: LF CRLF CR. However, special
2470 processing applies to CR:
2472 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
2473 nor a local message in the state where . is a terminator.
2475 (ii) If a bare CR is encountered in a header line, an extra space is added
2476 after the line terminator so as not to end the header. The reasoning
2477 behind this is that bare CRs in header lines are most likely either
2478 to be mistakes, or people trying to play silly games.
2480 59. The size of a message, as listed by "-bp" or in the Exim monitor window,
2481 was being incorrectly given as 18 bytes larger than it should have been.
2482 This is a VOB (very old bug).
2484 60. This may never have affected anything current, but just in case it has:
2485 When the local host is found other than at the start of a list of hosts,
2486 the local host, those with the same MX, and any that follow, are discarded.
2487 When the list in question was part of a longer list of hosts, the following
2488 hosts (not currently being processed) were also being discarded. This no
2489 longer happens. I'm not sure if this situation could ever has previously
2492 61. Added the "/MX" feature to lists of hosts in the manualroute and query
2495 62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
2496 header. This is something that is recommended in a new Internet Draft, and
2497 is something that is documented as being done by Sendmail. There are two
2498 possible values. For messages generated by the autoreply transport, Exim
2501 Auto-Submitted: auto-replied
2503 whereas for all other generated messages (e.g. bounces) it adds
2505 Auto-Submitted: auto-generated
2507 63. The "personal" condition in filters now includes a test for the
2508 Auto-Submitted: header. If it contains the string "auto-" the message it
2509 not considered personal.
2511 64. Added rcpt_include_affixes as a generic transport option.
2513 65. Added queue_only_override (default true).
2515 66. Added the syslog_duplication option.
2517 67. If what should have been the first header line of a message consisted of
2518 a space followed by a colon, Exim was mis-interpreting it as a header line.
2519 It isn't of course - it is syntactically invalid and should therefore be
2520 treated as the start of the message body. The misbehaviour could have
2521 caused a number of strange effects, including loss of data in subsequent
2522 header lines, and spool format errors.
2524 68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
2525 client host had authenticated. This control can now be exercised by an ACL
2526 for more flexibility.
2528 69. By default, callouts do not happen when testing with -bh. There is now a
2529 variant, -bhc, which does actually run the callout code, including
2530 consulting and updating the callout cache.
2532 70. Added support for saslauthd authentication, courtesy of Alexander
2535 71. If statvfs() failed on the spool or log directories while checking their
2536 size for availability, Exim confusingly gave the error "space shortage".
2537 Furthermore, in debugging mode it crashed with a floating point exception.
2538 These checks are done if check_{spool,log}_{space,inodes} are set, and when
2539 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
2540 serious problem, Exim now writes to the main and panic logs when this
2541 happens, with details of the failure. It then refuses to accept the
2542 incoming message, giving the message "spool directory problem" or "log
2543 directory problem" with a 421 code for SMTP messages.
2545 72. When Exim is about to re-exec itself, it ensures that the file descriptors
2546 0, 1, and 2 exist, because some OS complain for execs without them (see
2547 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
2548 descriptors. However, the code omitted to check that the open succeeded,
2549 causing mysterious errors if for some reason the permissions on /dev/null
2550 got screwed. Now Exim writes a message to the main and panic logs, and
2551 bombs out if it can't open /dev/null.
2553 73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
2554 interact so that it is all more flexible. It is supposed to remain
2555 backwards compatible. Also added extra_local_interfaces.
2557 74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
2558 to bomb out with an assertion failure - to the client this appears as a
2559 connection drop. This problem occurs in the part of the code that was taken
2560 from the Samba project. Fortunately, the assertion is in a very simple
2561 function, so I have fixed this by reproducing the function inline in the
2562 one place where it is called, and arranging for authentication to fail
2563 instead of killing the process with assert().
2565 75. The SPA client code was not working when the server requested OEM rather
2566 than Unicode encoding.
2568 76. Added code to make require_files with a specific uid setting more usable in
2569 the case where statting the file as root fails - usually a non-root-mounted
2570 NFS file system. When this happens and the failure is EACCES, Exim now
2571 forks a subprocess and does the per-uid checking as the relevant uid.
2573 77. Added process_log_path.
2575 78. If log_file_path was not explicitly set, a setting of check_log_space or
2576 check_log_inodes was ignored.
2578 79. If a space check for the spool or log partitions fails, the incident is now
2579 logged. Of course, in the latter case the data may get lost...
2581 80. Added the %p formatting code to string_format() so that it can be used to
2582 print addresses in debug_print(). Adjusted all the address printing in the
2583 debugging in store.c to use %p rather than %d.
2585 81. There was a concern that a line of code in smtp_in.c could overflow a
2586 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
2587 initially expressed, the concern was not well-founded, because trailing
2588 spaces are removed early. However, if the trailing spaces were followed by
2589 a NULL, they did not get removed, so the overflow was possible. Two fixes
2592 (a) I re-wrote the offending code in a cleaner fashion.
2593 (b) If an incoming SMTP command contains a NULL character, it is rejected
2596 82. When Exim changes uid/gid to the Exim user at daemon start time, it now
2597 runs initgroups(), so that if the Exim user is in any additional groups,
2598 they will be used during message reception.
2604 The change log for 4.20 and earlier releases has been archived.
git://git.exim.org / users / heiko / exim.git / blob