-/* $Cambridge: exim/src/src/spool_out.c,v 1.7 2005/06/22 15:44:38 ph10 Exp $ */
-
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2005 */
+/* Copyright (c) University of Cambridge 1995 - 2016 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions for writing spool files, and moving them about. */
*************************************************/
/* This function is called immediately after errors in writing the spool, with
-errno still set. It creates and error message, depending on the circumstances.
+errno still set. It creates an error message, depending on the circumstances.
If errmsg is NULL, it logs the message and panic-dies. Otherwise errmsg is set
to point to the message, and -1 is returned. This function makes the code of
spool_write_header() a bit neater.
spool_write_error(int where, uschar **errmsg, uschar *s, uschar *temp_name,
FILE *f)
{
-uschar *msg = (where == SW_RECEIVING)?
- string_sprintf("spool file %s error while receiving from %s: %s", s,
- (sender_fullhost != NULL)? sender_fullhost : sender_ident,
- strerror(errno))
- :
- string_sprintf("spool file %s error while %s: %s", s,
- (where == SW_DELIVERING)? "delivering" : "modifying",
- strerror(errno));
-
-if (temp_name != NULL) Uunlink(temp_name);
-if (f != NULL) fclose(f);
-
-if (errmsg == NULL)
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s", msg);
-else
+uschar *msg = where == SW_RECEIVING
+ ? string_sprintf("spool file %s error while receiving from %s: %s", s,
+ sender_fullhost ? sender_fullhost : sender_ident,
+ strerror(errno))
+ : string_sprintf("spool file %s error while %s: %s", s,
+ where == SW_DELIVERING ? "delivering" : "modifying",
+ strerror(errno));
+
+if (temp_name) Uunlink(temp_name);
+if (f) (void)fclose(f);
+
+if (errmsg)
*errmsg = msg;
+else
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s", msg);
return -1;
}
automatically. */
if (fd >= 0)
- {
- (void)fchown(fd, exim_uid, exim_gid);
- (void)fchmod(fd, SPOOL_MODE);
- }
+ if (fchown(fd, exim_uid, exim_gid) || fchmod(fd, SPOOL_MODE))
+ {
+ DEBUG(D_any) debug_printf("failed setting perms on %s\n", temp_name);
+ (void) close(fd); fd = -1;
+ Uunlink(temp_name);
+ }
return fd;
}
FILE *f;
header_line *h;
struct stat statbuf;
-uschar name[256];
-uschar temp_name[256];
+uschar * tname;
+uschar * fname;
-sprintf(CS temp_name, "%s/input/%s/hdr.%d", spool_directory, message_subdir,
- (int)getpid());
-fd = spool_open_temp(temp_name);
-if (fd < 0) return spool_write_error(where, errmsg, US"open", NULL, NULL);
+tname = spool_fname(US"input", message_subdir,
+ string_sprintf("hdr.%d", (int)getpid()), US"");
+
+if ((fd = spool_open_temp(tname)) < 0)
+ return spool_write_error(where, errmsg, US"open", NULL, NULL);
f = fdopen(fd, "wb");
-DEBUG(D_receive|D_deliver) debug_printf("Writing spool header file\n");
+DEBUG(D_receive|D_deliver) debug_printf("Writing spool header file: %s\n", tname);
/* We now have an open file to which the header data is to be written. Start
with the file's leaf name, to make the file self-identifying. Continue with the
if (received_protocol != NULL)
fprintf(f, "-received_protocol %s\n", received_protocol);
-/* Preserve any ACL variables that are set. Because the values may contain
-newlines, we use an explicit length. */
+/* Preserve any ACL variables that are set. */
-for (i = 0; i < ACL_C_MAX + ACL_M_MAX; i++)
- {
- if (acl_var[i] != NULL)
- fprintf(f, "-acl %d %d\n%s\n", i, Ustrlen(acl_var[i]), acl_var[i]);
- }
+tree_walk(acl_var_c, &acl_var_write, f);
+tree_walk(acl_var_m, &acl_var_write, f);
/* Now any other data that needs to be remembered. */
fprintf(f, "-body_linecount %d\n", body_linecount);
+fprintf(f, "-max_received_linelength %d\n", max_received_linelength);
if (body_zerocount > 0) fprintf(f, "-body_zerocount %d\n", body_zerocount);
if (allow_unqualified_recipient) fprintf(f, "-allow_unqualified_recipient\n");
if (allow_unqualified_sender) fprintf(f, "-allow_unqualified_sender\n");
if (deliver_firsttime) fprintf(f, "-deliver_firsttime\n");
-if (deliver_freeze) fprintf(f, "-frozen %d\n", deliver_frozen_at);
+if (deliver_freeze) fprintf(f, "-frozen " TIME_T_FMT "\n", deliver_frozen_at);
if (dont_deliver) fprintf(f, "-N\n");
if (host_lookup_deferred) fprintf(f, "-host_lookup_deferred\n");
if (host_lookup_failed) fprintf(f, "-host_lookup_failed\n");
if (local_error_message) fprintf(f, "-localerror\n");
if (local_scan_data != NULL) fprintf(f, "-local_scan %s\n", local_scan_data);
#ifdef WITH_CONTENT_SCAN
-if (spam_score_int != NULL) fprintf(f,"-spam_score_int %s\n", spam_score_int);
+if (spam_bar) fprintf(f,"-spam_bar %s\n", spam_bar);
+if (spam_score) fprintf(f,"-spam_score %s\n", spam_score);
+if (spam_score_int) fprintf(f,"-spam_score_int %s\n", spam_score_int);
#endif
if (deliver_manual_thaw) fprintf(f, "-manual_thaw\n");
if (sender_set_untrusted) fprintf(f, "-sender_set_untrusted\n");
#endif
#ifdef SUPPORT_TLS
-if (tls_certificate_verified) fprintf(f, "-tls_certificate_verified\n");
-if (tls_cipher != NULL) fprintf(f, "-tls_cipher %s\n", tls_cipher);
-if (tls_peerdn != NULL) fprintf(f, "-tls_peerdn %s\n", tls_peerdn);
+if (tls_in.certificate_verified) fprintf(f, "-tls_certificate_verified\n");
+if (tls_in.cipher) fprintf(f, "-tls_cipher %s\n", tls_in.cipher);
+if (tls_in.peercert)
+ {
+ (void) tls_export_cert(big_buffer, big_buffer_size, tls_in.peercert);
+ fprintf(f, "-tls_peercert %s\n", CS big_buffer);
+ }
+if (tls_in.peerdn) fprintf(f, "-tls_peerdn %s\n", string_printing(tls_in.peerdn));
+if (tls_in.sni) fprintf(f, "-tls_sni %s\n", string_printing(tls_in.sni));
+if (tls_in.ourcert)
+ {
+ (void) tls_export_cert(big_buffer, big_buffer_size, tls_in.ourcert);
+ fprintf(f, "-tls_ourcert %s\n", CS big_buffer);
+ }
+if (tls_in.ocsp) fprintf(f, "-tls_ocsp %d\n", tls_in.ocsp);
#endif
+#ifdef SUPPORT_I18N
+if (message_smtputf8)
+ {
+ fprintf(f, "-smtputf8\n");
+ if (message_utf8_downconvert)
+ fprintf(f, "-utf8_%sdowncvt\n", message_utf8_downconvert < 0 ? "opt" : "");
+ }
+#endif
+
+/* Write the dsn flags to the spool header file */
+DEBUG(D_deliver) debug_printf("DSN: Write SPOOL :-dsn_envid %s\n", dsn_envid);
+if (dsn_envid != NULL) fprintf(f, "-dsn_envid %s\n", dsn_envid);
+DEBUG(D_deliver) debug_printf("DSN: Write SPOOL :-dsn_ret %d\n", dsn_ret);
+if (dsn_ret != 0) fprintf(f, "-dsn_ret %d\n", dsn_ret);
+
/* To complete the envelope, write out the tree of non-recipients, followed by
the list of recipients. These won't be disjoint the first time, when no
checking has been done. If a recipient is a "one-time" alias, it is followed by
for (i = 0; i < recipients_count; i++)
{
recipient_item *r = recipients_list + i;
- if (r->pno < 0 && r->errors_to == NULL)
+
+ DEBUG(D_deliver) debug_printf("DSN: Flags :%d\n", r->dsn_flags);
+
+ if (r->pno < 0 && r->errors_to == NULL && r->dsn_flags == 0)
fprintf(f, "%s\n", r->address);
else
{
- uschar *errors_to = (r->errors_to == NULL)? US"" : r->errors_to;
- fprintf(f, "%s %s %d,%d#1\n", r->address, errors_to,
- Ustrlen(errors_to), r->pno);
+ uschar * errors_to = r->errors_to ? r->errors_to : US"";
+ /* for DSN SUPPORT extend exim 4 spool in a compatible way by
+ adding new values upfront and add flag 0x02 */
+ uschar * orcpt = r->orcpt ? r->orcpt : US"";
+
+ fprintf(f, "%s %s %d,%d %s %d,%d#3\n", r->address, orcpt, Ustrlen(orcpt),
+ r->dsn_flags, errors_to, Ustrlen(errors_to), r->pno);
}
+
+ DEBUG(D_deliver) debug_printf("DSN: **** SPOOL_OUT - "
+ "address: |%s| errorsto: |%s| orcpt: |%s| dsn_flags: %d\n",
+ r->address, r->errors_to, r->orcpt, r->dsn_flags);
}
/* Put a blank line before the headers */
to get the actual size of the headers. */
fflush(f);
-fstat(fd, &statbuf);
+if (fstat(fd, &statbuf))
+ return spool_write_error(where, errmsg, US"fstat", tname, f);
size_correction = statbuf.st_size;
/* Finally, write out the message's headers. To make it easier to read them
/* Flush and check for any errors while writing */
if (fflush(f) != 0 || ferror(f))
- return spool_write_error(where, errmsg, US"write", temp_name, f);
+ return spool_write_error(where, errmsg, US"write", tname, f);
/* Force the file's contents to be written to disk. Note that fflush()
just pushes it out of C, and fclose() doesn't guarantee to do the write
either. That's just the way Unix works... */
-if (fsync(fileno(f)) < 0)
- return spool_write_error(where, errmsg, US"sync", temp_name, f);
+if (EXIMfsync(fileno(f)) < 0)
+ return spool_write_error(where, errmsg, US"sync", tname, f);
/* Get the size of the file, and close it. */
-fstat(fd, &statbuf);
+if (fstat(fd, &statbuf) != 0)
+ return spool_write_error(where, errmsg, US"fstat", tname, NULL);
if (fclose(f) != 0)
- return spool_write_error(where, errmsg, US"close", temp_name, NULL);
+ return spool_write_error(where, errmsg, US"close", tname, NULL);
/* Rename the file to its correct name, thereby replacing any previous
incarnation. */
-sprintf(CS name, "%s/input/%s/%s-H", spool_directory, message_subdir, id);
+fname = spool_fname(US"input", message_subdir, id, US"-H");
+DEBUG(D_receive|D_deliver) debug_printf("Renaming spool header file: %s\n", fname);
-if (Urename(temp_name, name) < 0)
- return spool_write_error(where, errmsg, US"rename", temp_name, NULL);
+if (Urename(tname, fname) < 0)
+ return spool_write_error(where, errmsg, US"rename", tname, NULL);
/* Linux (and maybe other OS?) does not automatically sync a directory after
an operation like rename. We therefore have to do it forcibly ourselves in
#ifdef NEED_SYNC_DIRECTORY
-sprintf(CS temp_name, "%s/input/%s/.", spool_directory, message_subdir);
+tname = spool_fname(US"input", message_subdir, US".", US"");
-#ifndef O_DIRECTORY
-#define O_DIRECTORY 0
-#endif
+# ifndef O_DIRECTORY
+# define O_DIRECTORY 0
+# endif
-if ((fd = Uopen(temp_name, O_RDONLY|O_DIRECTORY, 0)) < 0)
- return spool_write_error(where, errmsg, US"directory open", name, NULL);
+if ((fd = Uopen(tname, O_RDONLY|O_DIRECTORY, 0)) < 0)
+ return spool_write_error(where, errmsg, US"directory open", fname, NULL);
-if (fsync(fd) < 0 && errno != EINVAL)
- return spool_write_error(where, errmsg, US"directory sync", name, NULL);
+if (EXIMfsync(fd) < 0 && errno != EINVAL)
+ return spool_write_error(where, errmsg, US"directory sync", fname, NULL);
if (close(fd) < 0)
- return spool_write_error(where, errmsg, US"directory close", name, NULL);
+ return spool_write_error(where, errmsg, US"directory close", fname, NULL);
#endif /* NEED_SYNC_DIRECTORY */
make_link(uschar *dir, uschar *subdir, uschar *id, uschar *suffix, uschar *from,
uschar *to, BOOL noentok)
{
-uschar f[256], t[256];
-sprintf(CS f, "%s/%s%s/%s/%s%s", spool_directory, from, dir, subdir, id, suffix);
-sprintf(CS t, "%s/%s%s/%s/%s%s", spool_directory, to, dir, subdir, id, suffix);
-if (Ulink(f, t) < 0 && (!noentok || errno != ENOENT))
+uschar * fname = spool_fname(string_sprintf("%s%s", from, dir), subdir, id, suffix);
+uschar * tname = spool_fname(string_sprintf("%s%s", to, dir), subdir, id, suffix);
+if (Ulink(fname, tname) < 0 && (!noentok || errno != ENOENT))
{
log_write(0, LOG_MAIN|LOG_PANIC, "link(\"%s\", \"%s\") failed while moving "
- "message: %s", f, t, strerror(errno));
+ "message: %s", fname, tname, strerror(errno));
return FALSE;
}
return TRUE;
break_link(uschar *dir, uschar *subdir, uschar *id, uschar *suffix, uschar *from,
BOOL noentok)
{
-uschar f[256];
-sprintf(CS f, "%s/%s%s/%s/%s%s", spool_directory, from, dir, subdir, id, suffix);
-if (Uunlink(f) < 0 && (!noentok || errno != ENOENT))
+uschar * fname = spool_fname(string_sprintf("%s%s", from, dir), subdir, id, suffix);
+if (Uunlink(fname) < 0 && (!noentok || errno != ENOENT))
{
log_write(0, LOG_MAIN|LOG_PANIC, "unlink(\"%s\") failed while moving "
- "message: %s", f, strerror(errno));
+ "message: %s", fname, strerror(errno));
return FALSE;
}
return TRUE;
{
/* Create any output directories that do not exist. */
-sprintf(CS big_buffer, "%sinput/%s", to, subdir);
-(void)directory_make(spool_directory, big_buffer, INPUT_DIRECTORY_MODE, TRUE);
-sprintf(CS big_buffer, "%smsglog/%s", to, subdir);
-(void)directory_make(spool_directory, big_buffer, INPUT_DIRECTORY_MODE, TRUE);
+(void) directory_make(spool_directory,
+ spool_sname(string_sprintf("%sinput", to), subdir),
+ INPUT_DIRECTORY_MODE, TRUE);
+(void) directory_make(spool_directory,
+ spool_sname(string_sprintf("%smsglog", to), subdir),
+ INPUT_DIRECTORY_MODE, TRUE);
/* Move the message by first creating new hard links for all the files, and
then removing the old links. When moving messages onto the main spool, the -H
file should be set up last, because that's the one that tells Exim there is a
message to be delivered, so we create its new link last and remove its old link
first. Programs that look at the alternate directories should follow the same
-rule of waiting for a -H file before doing anything. When moving messsages off
+rule of waiting for a -H file before doing anything. When moving messages off
the mail spool, the -D file should be open and locked at the time, thus keeping
Exim's hands off. */
#endif
/* End of spool_out.c */
+/* vi: aw ai sw=2
+*/
git://git.exim.org / exim.git / blobdiff