. Update the Copyright year (only) when changing content.
. /////////////////////////////////////////////////////////////////////////////
-.set previousversion "4.96"
+.set previousversion "4.98"
.include ./local_params
.set ACL "access control lists (ACLs)"
.set drivernamemax "64"
.macro copyyear
-2022
+2024
.endmacro
. /////////////////////////////////////////////////////////////////////////////
. --- table with four columns. For cases when the option name is given with
. --- a space, so that it can be split, a fifth argument is used for the
. --- index entry.
+. --- Also one for multiple option def headings be grouped in a single
+. --- table (but without the split capability).
+
+.macro otable
+.itable all 0 0 4 8* left 6* center 6* center 6* right
+.endmacro
+
+.macro orow
+.row "&%$1%&" "Use: &'$2'&" "Type: &'$3'&" "Default: &'$4'&"
+.endmacro
.macro option
.arg 5
.arg -5
.oindex "&%$1%&"
.endarg
-.itable all 0 0 4 8* left 6* center 6* center 6* right
-.row "&%$1%&" "Use: &'$2'&" "Type: &'$3'&" "Default: &'$4'&"
+.otable
+.orow "$1" "$2" "$3" "$4"
+.endtable
+.endmacro
+
+.macro options
+.eacharg
+.oindex "&%$+1%&"
+.endeach 4
+.otable
+.eacharg
+.orow "$+1" "$+2" "$+3" "$+4"
+.endeach 4
.endtable
.endmacro
.cindex "FAQ"
As well as Exim distribution tar files, the Exim website contains a number of
differently formatted versions of the documentation. A recent addition to the
-online information is the Exim wiki (&url(https://wiki.exim.org)),
+online information is &url(https://wiki.exim.org,the Exim wiki),
which contains what used to be a separate FAQ, as well as various other
examples, tips, and know-how that have been contributed by Exim users.
The wiki site should always redirect to the correct place, which is currently
The following Exim mailing lists exist:
.table2 140pt
-.row &'exim-announce@exim.org'& "Moderated, low volume announcements list"
-.row &'exim-users@exim.org'& "General discussion list"
-.row &'exim-dev@exim.org'& "Discussion of bugs, enhancements, etc."
-.row &'exim-cvs@exim.org'& "Automated commit messages from the VCS"
+.row &'exim-announce@lists.exim.org'& "Moderated, low volume announcements list"
+.row &'exim-users@lists.exim.org'& "General discussion list"
+.row &'exim-users-de@lists.exim.org'& "General discussion list in German language"
+.row &'exim-dev@lists.exim.org'& "Discussion of bugs, enhancements, etc."
+.row &'exim-cvs@lists.exim.org'& "Automated commit messages from the VCS"
.endtable
You can subscribe to these lists, change your existing subscriptions, and view
.cindex "bug reports"
.cindex "reporting bugs"
Reports of obvious bugs can be emailed to &'bugs@exim.org'& or reported
-via the Bugzilla (&url(https://bugs.exim.org)). However, if you are unsure
+via &url(https://bugs.exim.org,the Bugzilla). However, if you are unsure
whether some behaviour is a bug or not, the best thing to do is to post a
message to the &'exim-dev'& mailing list and have it discussed.
.cindex "limitations of Exim"
.cindex "bang paths" "not handled by Exim"
Exim is designed for use as an Internet MTA, and therefore handles addresses in
-RFC 2822 domain format only. It cannot handle UUCP &"bang paths"&, though
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+domain format only. It cannot handle UUCP &"bang paths"&, though
simple two-component bang paths can be converted by a straightforward rewriting
configuration. This restriction does not prevent Exim from being interfaced to
UUCP as a transport mechanism, provided that domain addresses are used.
.cindex "local part" "definition of"
.cindex "domain" "definition of"
-The term &'local part'&, which is taken from RFC 2822, is used to refer to the
+The term &'local part'&, which is taken from
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822), is used to refer to the
part of an email address that precedes the @ sign. The part that follows the
@ sign is called the &'domain'& or &'mail domain'&.
.ilist
Sieve filters are written in the standard filtering language that is defined
-by RFC 3028.
+by &url(https://www.rfc-editor.org/rfc/rfc3028.html,RFC 3028).
.next
Exim filters are written in a syntax that is unique to Exim, but which is more
powerful than Sieve, which it pre-dates.
.cindex "base36"
.cindex "Darwin"
.cindex "Cygwin"
-Every message handled by Exim is given a &'message id'& which is sixteen
+.cindex "exim_msgdate"
+Every message handled by Exim is given a &'message id'& which is 23
characters long. It is divided into three parts, separated by hyphens, for
-example &`16VDhn-0001bo-D3`&. Each part is a sequence of letters and digits,
+example &`16VDhn-000000001bo-D342`&. Each part is a sequence of letters and digits,
normally encoding numbers in base 62. However, in the Darwin operating
system (Mac OS X) and when Exim is compiled to run under Cygwin, base 36
(avoiding the use of lower case letters) is used instead, because the message
contains the number of seconds since the start of the epoch (the normal Unix
way of representing the date and time of day).
.next
-After the first hyphen, the next six characters are the id of the process that
-received the message.
+After the first hyphen, the next
+eleven
+characters are the id of the process that received the message.
.next
-There are two different possibilities for the final two characters:
+There are two different possibilities for the final four characters:
.olist
.oindex "&%localhost_number%&"
If &%localhost_number%& is not set, this value is the fractional part of the
-time of reception, normally in units of 1/2000 of a second, but for systems
+time of reception, normally in units of
+microseconds.
+but for systems
that must use base 36 instead of base 62 (because of case-insensitive file
-systems), the units are 1/1000 of a second.
+systems), the units are
+2 us.
.next
-If &%localhost_number%& is set, it is multiplied by 200 (100) and added to
-the fractional part of the time, which in this case is in units of 1/200
-(1/100) of a second.
+If &%localhost_number%& is set, it is multiplied by
+500000 (250000) and added to
+the fractional part of the time, which in this case is in units of 2 us (4 us).
.endlist
.endlist
pid, it is guaranteed that the time will be different. In most cases, the clock
will already have ticked while the message was being received.
+The exim_msgdate utility (see section &<<SECTexim_msgdate>>&) can be
+used to display the date, and optionally the process id, of an Exim
+Message ID.
+
.section "Receiving mail" "SECID13"
.cindex "receiving mail"
versions. However, the more recent releases seem to have standardized on the
Berkeley DB library.
+.new
+Ownership of the Berkeley DB library has moved to a major corporation;
+development seems to have stalled and documentation is not freely available.
+This is probably not tenable for the long term use by Exim.
+.wen
+
Different DBM libraries have different conventions for naming the files they
use. When a program opens a file called &_dbmfile_&, there are several
possibilities:
Yet another DBM library, called &'tdb'&, is available from
&url(https://sourceforge.net/projects/tdb/files/). It has its own interface, and also
operates on a single file.
+.next
+It is possible to use &url(https://www.sqlite.org/index.html,sqlite3)
+for the DBM library.
.endlist
.cindex "USE_DB"
.code
USE_DB=yes
.endd
-Similarly, for gdbm you set USE_GDBM, and for tdb you set USE_TDB. An
-error is diagnosed if you set more than one of these.
+Similarly, for gdbm you set USE_GDBM, for tdb you set USE_TDB,
+and for sqlite3 you set USE_SQLITE.
+An error is diagnosed if you set more than one of these.
You can set USE_NDBM if needed to override an operating system default.
At the lowest level, the build-time configuration sets none of these options,
.code
DBMLIB = -ldb
DBMLIB = -ltdb
+DBMLIB = -lsqlite3
DBMLIB = -lgdbm -lgdbm_compat
.endd
The last of those was for a Linux having GDBM provide emulated NDBM facilities.
There is further detailed discussion about the various DBM libraries in the
file &_doc/dbm.discuss.txt_& in the Exim distribution.
+.new
+When moving from one DBM library to another,
+for the hints databases it suffices to just remove all the files in the
+directory named &"db/"& under the spool directory.
+This is because hints are only for optimisation and will be rebuilt
+during normal operations.
+Non-hints DBM databases (used by &"dbm"& lookups in the configuration)
+will need individual rebuilds for the new DBM library.
+This is not done automatically
+.wen
+
.section "Pre-building configuration" "SECID25"
.cindex "&[iconv()]& support"
.cindex "RFC 2047"
The contents of header lines in messages may be encoded according to the rules
-described RFC 2047. This makes it possible to transmit characters that are not
+described in &url(https://www.rfc-editor.org/rfc/rfc2047,RFC 2047).
+This makes it possible to transmit characters that are not
in the ASCII character set, and to label them as being in a particular
character set. When Exim is inspecting header lines by means of the &%$h_%&
mechanism, it decodes them, and translates them into a specified character set
.cindex "OpenSSL" "building Exim with"
.cindex "GnuTLS" "building Exim with"
Exim is usually built to support encrypted SMTP connections, using the STARTTLS
-command as per RFC 2487. It can also support clients that expect to
+command as per &url(https://www.rfc-editor.org/rfc/rfc2487,RFC 2487).
+It can also support clients that expect to
start a TLS session immediately on connection to a non-standard port (see the
&%tls_on_connect_ports%& runtime option and the &%-tls-on-connect%& command
line option).
-.section "Dynamically loaded lookup module support" "SECTdynamicmodules"
+.section "Dynamically loaded module support" "SECTdynamicmodules"
.cindex "lookup modules"
+.cindex "router modules"
+.cindex "transport modules"
+.cindex "authenticator modules"
.cindex "dynamic modules"
.cindex ".so building"
On some platforms, Exim supports not compiling all lookup types directly into
the main binary, instead putting some into external modules which can be loaded
on demand.
This permits packagers to build Exim with support for lookups with extensive
-library dependencies without requiring all users to install all of those
+library dependencies without requiring all systems to install all of those
dependencies.
-Most, but not all, lookup types can be built this way.
+.new
+Any combination of lookup types can be built this way.
+Lookup types that provide several variants will be loaded as
+Exim starts.
+Types that provide only one method are not loaded until used by
+the runtime configuration.
+.wen
-Set &`LOOKUP_MODULE_DIR`& to the directory into which the modules will be
+For building
+set &`LOOKUP_MODULE_DIR`& to the directory into which the modules will be
installed; Exim will only load modules from that directory, as a security
measure. You will need to set &`CFLAGS_DYNAMIC`& if not already defined
for your OS; see &_OS/Makefile-Linux_& for an example.
Then, for each module to be loaded dynamically, define the relevant
&`LOOKUP_`&<&'lookup_type'&> flags to have the value "2" instead of "yes".
For example, this will build in lsearch but load sqlite and mysql support
-on demand:
+only if each is installed:
.code
LOOKUP_LSEARCH=yes
LOOKUP_SQLITE=2
LOOKUP_MYSQL=2
.endd
+Set also &`LOOKUP_`&<&'lookup_type'&>&` INCLUDE`& and
+&`LOOKUP_`&<&'lookup_type'&>`_LIBS if needed for each lookup type,
+ensuring that duplicates are not present in more global values.
+
+.new
+Similarly, authenticator, router and transport drivers can be built
+as external modules.
+Modules will be searched for as demanded by the runtime configuration,
+permitting a smaller Exim binary.
+
+For building, as above but using
+&`AUTH_*`&, &`ROUTER_*`& and &`TRANSPORT_*`& instead of &`LOOKUP_*`&,
+.wen
.section "The building process" "SECID29"
referenced from the configuration (for example, alias files) are changed,
because these are reread each time they are used.
+Either a SIGTERM or a SIGINT signal should be used to cause the daemon
+to cleanly shut down.
+Subprocesses handling recceiving or delivering messages,
+or for scanning the queue,
+will not be affected by the termination of the daemon process.
+
.cmdopt -bdf
This option has the same effect as &%-bd%& except that it never disconnects
from the controlling terminal, even when no debugging is specified.
Because macros in the config file are often used for secrets, those are only
available to admin users.
-.new
The word &"set"& at the start of a line, followed by a single space,
is recognised specially as defining a value for a variable.
+.cindex "tainted data" "expansion testing"
+If the sequence &",t"& is inserted before the space,
+the value is marked as tainted.
The syntax is otherwise the same as the ACL modifier &"set ="&.
-.wen
.cmdopt -bem <&'filename'&>
.cindex "testing" "string expansion"
&*Warning 1*&:
.cindex "RFC 1413"
-You can test features of the configuration that rely on ident (RFC 1413)
+You can test features of the configuration that rely on ident
+(&url(https://www.rfc-editor.org/rfc/rfc2487,RFC 1413))
information by using the &%-oMt%& option. However, Exim cannot actually perform
an ident callout when testing using &%-bh%& because there is no incoming SMTP
connection.
Features such as authentication and encryption, where the client input is not
plain text, cannot easily be tested with &%-bh%&. Instead, you should use a
specialized SMTP test program such as
-&url(https://www.jetmore.org/john/code/swaks/,swaks).
+&url(https://www.jetmore.org/john/code/swaks/,swaks,swaks).
.cmdopt -bhc <&'IP&~address'&>
This option operates in the same way as &%-bh%&, except that address
.cindex "Sieve filter" "capabilities"
This option causes Exim to emit an alphabetically sorted list of all supported
Sieve protocol extensions on stdout, one per line. This is anticipated to be
-useful for ManageSieve (RFC 5804) implementations, in providing that protocol's
+useful for ManageSieve
+(&url(https://datatracker.ietf.org/doc/html/rfc5804.html,RFC 5804))
+implementations, in providing that protocol's
&`SIEVE`& capability response line. As the precise list may depend upon
compile-time build options, which this option will adapt to, this is the only
way to guarantee a correct response.
This option runs an Exim receiving process that accepts an incoming,
locally-generated message on the standard input. The recipients are given as the
command arguments (except when &%-t%& is also present &-- see below). Each
-argument can be a comma-separated list of RFC 2822 addresses. This is the
+argument can be a comma-separated list of
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822) addresses.
+This is the
default option for selecting the overall action of an Exim call; it is assumed
if no other conflicting option is present.
suppressing this for special cases.
Policy checks on the contents of local messages can be enforced by means of
-the non-SMTP ACL. See chapter &<<CHAPACL>>& for details.
+the non-SMTP ACL. See section &<<SECnonSMTP>>& for details.
.cindex "return code" "for &%-bm%&"
The return code is zero if the message is successfully accepted. Otherwise, the
.cindex "&""From""& line"
.cindex "UUCP" "&""From""& line"
.cindex "Sendmail compatibility" "&""From""& line"
-of the message must be as defined in RFC 2822, except that, for
+of the message must be as defined in
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822),
+except that, for
compatibility with Sendmail and Smail, a line in one of the forms
.code
From sender Fri Jan 5 12:55 GMT 1997
&%queue_list_requires_admin%& is set false.
+.cmdopt -bpi
+.cindex queue "list of message IDs"
+This option operates like &%-bp%&, but only outputs message ids
+(one per line).
+
+
.cmdopt -bpr
This option operates like &%-bp%&, but the output is not sorted into
chronological order of message arrival. This can speed it up when there are
.cmdopt -bpra
This option is a combination of &%-bpr%& and &%-bpa%&.
+.cmdopt -bpri
+This option is a combination of &%-bpr%& and &%-bpi%&.
+
.cmdopt -bpru
This option is a combination of &%-bpr%& and &%-bpu%&.
provoked if the terminating dot is missing. A further message may then follow.
As for other local message submissions, the contents of incoming batch SMTP
-messages can be checked using the non-SMTP ACL (see chapter &<<CHAPACL>>&).
+messages can be checked using the non-SMTP ACL (see section &<<SECnonSMTP>>&).
Unqualified addresses are automatically qualified using &%qualify_domain%& and
&%qualify_recipient%&, as appropriate, unless the &%-bnq%& option is used.
Some other SMTP commands are recognized in the input. HELO and EHLO act
-as RSET; VRFY, EXPN, ETRN, and HELP act as NOOP;
+as RSET; VRFY, EXPN, ETRN, ATRN, and HELP act as NOOP;
QUIT quits, ignoring the rest of the standard input.
.cindex "return code" "for &%-bS%&"
This option requests Exim to give up trying to deliver the listed messages,
including any that are frozen. However, if any of the messages are active,
their status is not altered. For non-bounce messages, a delivery error message
-is sent to the sender, containing the text &"cancelled by administrator"&.
+is sent to the sender.
Bounce messages are just discarded. This option can be used only by an admin
user.
.cindex "message" "listing in RFC 2822 format"
.cindex "listing" "message in RFC 2822 format"
This option causes a copy of the complete message (header lines plus body) to
-be written to the standard output in RFC 2822 format. This option can be used
-only by an admin user.
+be written to the standard output in
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+format. This option can be used only by an admin user.
.cmdopt -Mvh <&'message&~id'&>
.cindex "listing" "message headers"
given.
Normally the daemon creates this socket, unless a &%-oX%& and &*no*& &%-oP%&
option is also present.
-If this option is given then the socket will not be created. This could be
-required if the system is running multiple daemons.
+If this option is given then the socket will not be created. This is required
+if the system is running multiple daemons, in which case it should
+be used on all.
+The features supported by the socket will not be available in such cases.
The socket is currently used for
.ilist
fast ramp-up of queue runner processes
.next
+caching compiled regexes
+.next
obtaining a current queue size
.endlist
transports are run.
Performance will be best if the &%queue_run_in_order%& option is false.
-If that is so and the &%queue_fast_ramp%& option is true then
-in the first phase of the run,
+If that is so and
+the &%queue_fast_ramp%& option is true
+and a daemon-notifier socket is available
+then in the first phase of the run,
once a threshold number of messages are routed for a given host,
a delivery process is forked in parallel with the rest of the scan.
.cindex "hints database" "remembering routing"
The hints database that remembers which messages are waiting for specific hosts
-is updated, as if delivery to those hosts had been deferred. After this is
-complete, a second, normal queue scan happens, with routing and delivery taking
-place as normal. Messages that are routed to the same host should mostly be
+is updated, as if delivery to those hosts had been deferred.
+
+After the first queue scan complete,
+a second, normal queue scan is done, with routing and delivery taking
+place as normal.
+Messages that are routed to the same host should mostly be
delivered down a single SMTP
.cindex "SMTP" "passed connection"
.cindex "SMTP" "multiple deliveries"
.cindex "multiple SMTP deliveries"
connection because of the hints that were set up during the first queue scan.
-This option may be useful for hosts that are connected to the Internet
+
+Two-phase queue runs should be used on systems which, even intermittently,
+have a large queue (such as mailing-list operators).
+They may also be useful for hosts that are connected to the Internet
intermittently.
.vitem &%-q[q]i...%&
Such a daemon listens for incoming SMTP calls, and also starts a queue runner
process every 30 minutes.
+.cindex "named queues" "queue runners"
+It is possible to set up runners for multiple named queues within one daemon,
+For example:
+.code
+exim -qGhipri/2m -q10m -qqGmailinglist/1h
+.endd
+
When a daemon is started by &%-q%& with a time value, but without &%-bd%&, no
pid file is written unless one is explicitly requested by the &%-oP%& option.
The &%-R%& option makes it straightforward to initiate delivery of all messages
to a given domain after a host has been down for some time. When the SMTP
-command ETRN is accepted by its ACL (see chapter &<<CHAPACL>>&), its default
+command ETRN is accepted by its ACL (see section &<<SECTETRN>>&), its default
effect is to run Exim with the &%-R%& option, but it can be configured to run
an arbitrary command instead.
with Sendmail and other MTAs. (Prior to release 4.20, Exim gave an error if
&%-t%& was used in conjunction with &%Resent-%& header lines.)
-RFC 2822 talks about different sets of &%Resent-%& header lines (for when a
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+talks about different sets of &%Resent-%& header lines (for when a
message is resent several times). The RFC also specifies that they should be
added at the front of the message, and separated by &'Received:'& lines. It is
not at all clear how &%-t%& should operate in the present of multiple sets,
&` _DRIVER_ROUTER_* `& router drivers
&` _DRIVER_TRANSPORT_* `& transport drivers
&` _DRIVER_AUTHENTICATOR_* `& authenticator drivers
+&` _EXP_COND_* `& expansion conditions
+&` _EXP_ITEM_* `& expansion items
+&` _EXP_OP_* `& expansion operators
+&` _EXP_VAR_* `& expansion variables
&` _LOG_* `& log_selector values
&` _OPT_MAIN_* `& main config options
&` _OPT_ROUTERS_* `& generic router options
colon in the example above are necessary. If they were not there, the list would
be interpreted as the two items 127.0.0.1:: and 1.
-.section "Changing list separators" "SECTlistsepchange"
+.subsection "Changing list separators" "SECTlistsepchange"
.cindex "list separator" "changing"
.cindex "IPv6" "addresses in lists"
Doubling colons in IPv6 addresses is an unwelcome chore, so a mechanism was
-.section "Empty items in lists" "SECTempitelis"
+.subsection "Empty items in lists" "SECTempitelis"
.cindex "list" "empty item in"
An empty item at the end of a list is always ignored. In other words, trailing
separator characters are ignored. Thus, the list in
to your domain (MX delivery) for various good reasons (eg, ability to impose
much saner TLS protocol and ciphersuite requirements without unintended
consequences).
-RFC 6409 (previously 4409) specifies use of port 587 for SMTP Submission,
+&url(https://www.rfc-editor.org/rfc/rfc6409,RFC 6409) (previously 4409)
+specifies use of port 587 for SMTP Submission,
which uses STARTTLS, so this is the &"submission"& port.
-RFC 8314 specifies use of port 465 as the &"submissions"& protocol,
+&url(https://www.rfc-editor.org/rfc/rfc8314,RFC 8314)
+specifies use of port 465 as the &"submissions"& protocol,
which should be used in preference to 587.
You should also consider deploying SRV records to help clients find
these ports.
because not all DNS reverse zones are maintained, and sometimes DNS servers are
unreachable.
-The next two lines are concerned with &'ident'& callbacks, as defined by RFC
-1413 (hence their names):
+The next two lines are concerned with &'ident'& callbacks, as defined by
+&url(https://www.rfc-editor.org/rfc/rfc1413,RFC 1413)
+(hence their names):
.code
rfc1413_hosts = *
rfc1413_query_timeout = 0s
.endd
In an ideal world everybody follows the standards. For non-ASCII
-messages RFC 2047 is a standard, allowing a maximum line length of 76
+messages &url(https://www.rfc-editor.org/rfc/rfc2048,RFC 2047)
+is a standard, allowing a maximum line length of 76
characters. Exim adheres that standard and won't process messages which
violate this standard. (Even ${rfc2047:...} expansions will fail.)
In particular, the Exim maintainers have had multiple reports of
or &"|"&. If you have local accounts that include these characters, you will
have to modify this rule.
-Empty components (two dots in a row) are not valid in RFC 2822, but Exim
+Empty components (two dots in a row) are not valid in
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822),
+but Exim
allows them because they have been encountered in practice. (Consider the
common convention of local parts constructed as
&"&'first-initial.second-initial.family-name'&"& when applied to someone like
When the lookup succeeds, the result of the expansion is a list of domains (and
possibly other types of item that are allowed in domain lists).
.cindex "tainted data" "de-tainting"
-.cindex "de-tainting" "using a lookup expansion""
+.cindex "de-tainting" "using a lookup expansion"
The result of the expansion is not tainted.
.next
The &'query-style'& type accepts a generalized database query. No particular
key value is assumed by Exim for query-style lookups. You can use whichever
Exim variables you need to construct the database query.
+
+For the string-expansion kind of lookups, the query is given in the first
+bracketed argument of the &${lookup ...}$& expansion.
+For the list-argument kind of lookup the query is given by the remainder of the
+list item after the first semicolon.
+
.cindex "tainted data" "quoting for lookups"
-If tainted data is used in the query then it should be quuted by
+If tainted data is used in the query then it should be quoted by
using the &*${quote_*&<&'lookup-type'&>&*:*&<&'string'&>&*}*& expansion operator
appropriate for the lookup.
.endlist
.cindex "dsearch lookup type"
The given file must be an absolute directory path; this is searched for an entry
whose name is the key by calling the &[lstat()]& function.
-The key may not contain any forward slash characters.
+Unless the options (below) permit a path,
+the key may not contain any forward slash characters.
If &[lstat()]& succeeds then so does the lookup.
.cindex "tainted data" "dsearch result"
The result is regarded as untainted.
separated by a comma. Options, if present, are a comma-separated list having
each element starting with a tag name and an equals.
-Two options are supported, for the return value and for filtering match
+Three options are supported, for the return value and for filtering match
candidates.
The "ret" option requests an alternate result value of
the entire path for the entry. Example:
${lookup {passwd} dsearch,ret=full {/etc}}
.endd
The default result is just the requested entry.
+
The "filter" option requests that only directory entries of a given type
are matched. The match value is one of "file", "dir" or "subdir" (the latter
not matching "." or ".."). Example:
The default matching is for any entry type, including directories
and symlinks.
+The "key" option relaxes the restriction that only a simple path component can
+be searched for, to permit a sequence of path components. Example:
+.code
+${lookup {foo/bar} dsearch,key=path {/etc}}
+.endd
+If this option is used, a ".." component in the key is specifically disallowed.
+The default operation is that the key may only be a single path component.
+
An example of how this
lookup can be used to support virtual domains is given in section
&<<SECTvirtualdomains>>&.
lookup types support only literal keys.
&*Warning 2*&: In a host list, you must always use &(net-iplsearch)& so that
-the implicit key is the host's IP address rather than its name (see section
-&<<SECThoslispatsikey>>&).
+the implicit key is the host's IP address rather than its name
+(see section &<<SECThoslispatsikey>>&).
&*Warning 3*&: Do not use an IPv4-mapped IPv6 address for a key; use the
IPv4, in dotted-quad form. (Exim converts IPv4-mapped IPv6 addresses to this
The given file is an LMDB database.
LMDB is a memory-mapped key-value store,
with API modeled loosely on that of BerkeleyDB.
-See &url(https://symas.com/products/lightning-memory-mapped-database/)
+See &url(https://symas.com/products/lightning-memory-mapped-database/,LMDB)
for the feature set and operation modes.
Exim provides read-only access via the LMDB C library.
in a database file is useless, because the asterisk in a partial matching
subject key is always followed by a dot.
+When the lookup is done from a string-expansion,
+the variables &$1$& and &$2$& contain the wild and non-wild parts of the key
+during the expansion of the replacement text.
+They return to their previous values at the end of the lookup item.
+
.code
${quote_<lookup-type>:<string>}
.endd
-For example, the safest way to write the NIS+ query is
+For example, the way to write the NIS+ query is
.code
[name="${quote_nisplus:$local_part}"]
.endd
+.cindex "tainted data" "in lookups"
+&*All*& tainted data used in a query-style lookup must be quoted
+using a mechanism appropriate for the lookup type.
See chapter &<<CHAPexpand>>& for full coverage of string expansions. The quote
operator can be used for all lookup types, but has no effect for single-key
lookups, since no quoting is ever needed in their key strings.
.subsection "Format of LDAP queries" SECTforldaque
.cindex "LDAP" "query format"
-An LDAP query takes the form of a URL as defined in RFC 2255. For example, in
+An LDAP query takes the form of a URL as defined in
+&url(https://www.rfc-editor.org/rfc/rfc2255,RFC 2255). For example, in
the configuration of a &(redirect)& router one might have this setting:
.code
data = ${lookup ldap \
) => \29
\ => \5C
.endd
-in accordance with RFC 2254. The resulting string is then quoted according
+in accordance with
+&url(https://www.rfc-editor.org/rfc/rfc2254,RFC 2254).
+The resulting string is then quoted according
to the rules for URLs, that is, all non-alphanumeric characters except
.code
! $ ' - . _ ( ) * +
, + " \ < > ;
.endd
It also inserts a backslash before any leading spaces or # characters, and
-before any trailing spaces. (These rules are in RFC 2253.) The resulting string
-is then quoted according to the rules for URLs. For example:
+before any trailing spaces. (These rules are in
+&url(https://www.rfc-editor.org/rfc/rfc2255,RFC 2253).)
+The resulting string is then quoted according to the rules for URLs.
+For example:
.code
${quote_ldap_dn: a(bc)*, a<yz>; }
.endd
failures, and timeouts.
For each server name in the list, a port number can be given. The standard way
-of specifying a host and port is to use a colon separator (RFC 1738). Because
+of specifying a host and port is to use a colon separator
+(&url(https://www.rfc-editor.org/rfc/rfc1738,RFC 1738)). Because
&%ldap_default_servers%& is a colon-separated list, such colons have to be
doubled. For example
.code
on the number of entries returned, and no time limit on queries.
When a DN is quoted in the USER= setting for LDAP authentication, Exim
-removes any URL quoting that it may contain before passing it LDAP. Apparently
+removes any URL quoting that it may contain before passing it to the LDAP library.
+Apparently
some libraries do this for themselves, but some do not. Removing the URL
quoting has two advantages:
${lookup pgsql,servers=master/db/name/pw {UPDATE ...} }
.endd
-An older syntax places the servers specification before the query,
+A now-deprecated syntax places the servers specification before the query,
semicolon separated:
.code
${lookup mysql{servers=master; UPDATE ...} }
.endd
-The new version avoids potential issues with tainted
-arguments in the query, for explicit expansion.
+The new version avoids issues with tainted
+arguments explicitly expanded as part of the query.
+The entire string within the braces becomes tainted,
+including the server specification - which is not permissible.
+If the older sytax is used, a warning message will be logged.
+This syntax will be removed in a future release.
+
&*Note*&: server specifications in list-style lookups are still problematic.
the default value is &"exim"&.
The full syntax of each item in &%mysql_servers%& is:
.display
-<&'hostname'&>::<&'port'&>(<&'socket name'&>)[<&'option group'&>]/&&&
- <&'database'&>/<&'user'&>/<&'password'&>
+<&'hostspec'&><&'portspec'&>(<&'socket name'&>)[<&'option group'&>]/&&&
+ <&'database'&>/<&'user'&>/<&'password'&>
.endd
Any of the four sub-parts of the first field can be omitted. For normal use on
the local host it can be left blank or set to just &"localhost"&.
+.new
+A &'hostspec'& can be a hostname, an IPv4 address or an IPv6 address.
+For the latter, a &'portspec'& is a dot followed by a port number;
+for the other two a &'portspec'& is a colon followed by a port number.
+.wen
+
+Note that the default list-separator for the list of servers is a colon so
+(unless that is changed) all colons in list items must be doubled.
+
No database need be supplied &-- but if it is absent here, it must be given in
the queries.
anything (for example, setting a field to the value it already has), the result
is zero because no rows are affected.
+To get an encryted connection, use a Mysql option file with the required
+parameters for the connection.
+
.subsection "Special PostgreSQL features" SECID74
+.new
+The &'hostspec'& for PostgreSQL follows the same rules as for MySQL above.
+.wen
+
PostgreSQL lookups can also use Unix domain socket connections to the database.
This is usually faster and costs less CPU time than a TCP/IP connection.
However it can be used only if the mail server runs on the same machine as the
.oindex &%sqlite_dbfile%&
There are two ways of
specifying the file.
-The first is is by using the &%sqlite_dbfile%& main option.
+The first is by using the &%sqlite_dbfile%& main option.
The second, which allows separate files for each query,
is to use an option appended, comma-separated, to the &"sqlite"&
lookup type word. The option is the word &"file"&, then an equals,
.section "Expansion of lists" "SECTlistexpand"
.cindex "expansion" "of lists"
Each list is expanded as a single string before it is used.
+.cindex "tainted data" tracking
+&*Note*&: As a result, if any componend was tainted then the
+entire result string becomes tainted.
&'Exception: the router headers_remove option, where list-item
splitting is done before string-expansion.'&
&*Reminder*&: With this kind of pattern, you must have host &'names'& as
keys in the file, not IP addresses. If you want to do lookups based on IP
-addresses, you must precede the search type with &"net-"& (see section
-&<<SECThoslispatsikey>>&). There is, however, no reason why you could not use
+addresses, you must precede the search type with &"net-"&
+(see section &<<SECThoslispatsikey>>&).
+There is, however, no reason why you could not use
two items in the same list, one doing an address lookup and one doing a name
lookup, both using the same file.
.cindex "case forcing in address lists"
Domains in email addresses are always handled caselessly, but for local parts
case may be significant on some systems (see &%caseful_local_part%& for how
-Exim deals with this when routing addresses). However, RFC 2505 (&'Anti-Spam
+Exim deals with this when routing addresses). However,
+&url(https://www.rfc-editor.org/rfc/rfc2505,RFC 2505) (&'Anti-Spam
Recommendations for SMTP MTAs'&) suggests that matching of addresses to
blocking lists should be done in a case-independent manner. Since most address
lists in Exim are used for this kind of control, Exim attempts to do this by
below in section &<<SECTexpansionitems>>& onwards. Backslash is used as an
escape character, as described in the following section.
+.cindex "tainted data" tracking
+If any porttion of the result string is tainted, the entire result is.
+
Whether a string is expanded depends upon the context. Usually this is solely
dependent upon the option for which a value is sought; in this documentation,
options for which string expansion is performed are marked with † after
database lookups, and the use of expansion operators such as &%sg%&, &%substr%&
and &%nhash%&.
-.new
When reading lines from the standard input,
macros can be defined and ACL variables can be set.
For example:
set acl_m_myvar = bar
.endd
Such macros and variables can then be used in later input lines.
-.wen
Exim gives up its root privilege when it is called with the &%-be%& option, and
instead runs under the uid and gid it was called with, to prevent users from
.code
add_header = :at_start:${authresults {$primary_hostname}}
.endd
-This is safe even if no authentication results are available.
+This is safe even if no authentication results are available
+and would generally be placed in the DATA ACL.
.vitem "&*${certextract{*&<&'field'&>&*}{*&<&'certificate'&>&*}&&&
After expansion, <&'string'&> is interpreted as a list, colon-separated by
default, but the separator can be changed in the usual way (&<<SECTlistsepchange>>&).
For each item
-in this list, its value is place in &$item$&, and then the condition is
+in this list, its value is placed in &$item$&, and then the condition is
evaluated.
-.new
Any modification of &$value$& by this evaluation is discarded.
-.wen
If the condition is true, &$item$& is added to the output as an
item in a new list; if the condition is false, the item is discarded. The
separator used for the output list is the same as the one used for the
value of HEADERS_CHARSET in &_Local/Makefile_&. The ultimate default is
ISO-8859-1.
-Header names follow the syntax of RFC 2822, which states that they may contain
+Header names follow the syntax of
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822),
+which states that they may contain
any printing characters except space and colon. Consequently, curly brackets
&'do not'& terminate header names, and should not be used to enclose them as
if they were variables. Attempting to do so causes a syntax error.
.cindex &%hmac%&
This function uses cryptographic hashing (either MD5 or SHA-1) to convert a
shared secret and some text into a message authentication code, as specified in
-RFC 2104. This differs from &`${md5:secret_text...}`& or
+&url(https://www.rfc-editor.org/rfc/rfc2104.RFC 2104).
+This differs from &`${md5:secret_text...}`& or
&`${sha1:secret_text...}`& in that the hmac step adds a signature to the
cryptographic hash, allowing for authentication that is not possible with MD5
or SHA-1 alone. The hash name must expand to either &`md5`& or &`sha1`& at
sending the request. Values are &"yes"& (the default) or &"no"&
(preferred, eg. by some webservers).
+.next
+&*sni*&
+Controls the use of Server Name Identification on the connection.
+Any nonempty value will be the SNI sent; TLS will be forced.
+
.next
&*tls*&
Controls the use of TLS on the connection.
This item inserts &"raw"& header lines. It is described with the &%header%&
expansion item in section &<<SECTexpansionitems>>& above.
-.vitem "&*${run <&'options'&> {*&<&'command&~arg&~list'&>&*}{*&<&'string1'&>&*}&&&
+.vitem "&*${run<&'options'&> {*&<&'command&~string'&>&*}{*&<&'string1'&>&*}&&&
{*&<&'string2'&>&*}}*&"
.cindex "expansion" "running a command"
.cindex "&%run%& expansion item"
This item runs an external command, as a subprocess.
-One option is supported after the word &'run'&, comma-separated.
+One option is supported after the word &'run'&, comma-separated
+and without whitespace.
If the option &'preexpand'& is not used,
-the command string is split into individual arguments by spaces
-and then each argument is expanded.
+the command string before expansion is split into individual arguments by spaces
+and then each argument is separately expanded.
Then the command is run
in a separate process, but under the same uid and gid. As in other command
executions from Exim, a shell is not used by default. If the command requires
a careful assessment for security vulnerabilities should be done.
If the option &'preexpand'& is used,
-the command and its arguments are first expanded as one string. The result is
-split apart into individual arguments by spaces, and then the command is run
-as above.
+the command string is first expanded as a whole.
+The expansion result is split apart into individual arguments by spaces,
+and then the command is run as above.
Since the arguments are split by spaces, when there is a variable expansion
which has an empty result, it will cause the situation that the argument will
simply be omitted when the program is actually executed by Exim. If the
.code
${run{/bin/bash -c "/usr/bin/id >/tmp/id"}{yes}{yes}}
.endd
+Note that &$value$& will not persist beyond the reception of a single message.
.vindex "&$runrc$&"
The return code from the command is put in the variable &$runrc$&, and this
.vitem &*${srs_encode&~{*&<&'secret'&>&*}{*&<&'return&~path'&>&*}{*&<&'original&~domain'&>&*}}*&
-SRS encoding. See SECT &<<SECTSRS>>& for details.
+SRS encoding. See section &<<SECTSRS>>& for details.
.vitem &*${address:*&<&'string'&>&*}*&
.cindex "expansion" "RFC 2822 address handling"
.cindex "&%address%& expansion item"
-The string is interpreted as an RFC 2822 address, as it might appear in a
+The string is interpreted as an
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address, as it might appear in a
header line, and the effective address is extracted from it. If the string does
not parse successfully, the result is empty.
.vitem &*${addresses:*&<&'string'&>&*}*&
.cindex "expansion" "RFC 2822 address handling"
.cindex "&%addresses%& expansion item"
-The string (after expansion) is interpreted as a list of addresses in RFC
-2822 format, such as can be found in a &'To:'& or &'Cc:'& header line. The
+The string (after expansion) is interpreted as a list of addresses in
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+format, such as can be found in a &'To:'& or &'Cc:'& header line. The
operative address (&'local-part@domain'&) is extracted from each item, and the
result of the expansion is a colon-separated list, with appropriate
doubling of colons should any happen to be present in the email addresses.
.vitem &*${domain:*&<&'string'&>&*}*&
.cindex "domain" "extraction"
.cindex "expansion" "domain extraction"
-The string is interpreted as an RFC 2822 address and the domain is extracted
-from it. If the string does not parse successfully, the result is empty.
+The string is interpreted as an
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address and the domain is extracted from it.
+If the string does not parse successfully, the result is empty.
.vitem &*${escape:*&<&'string'&>&*}*&
+.vitem &*${headerwrap_*&<&'cols'&>&*_*&<&'limit'&>&*:*&<&'string'&>&*}*&
+.cindex header "wrapping operator"
+.cindex expansion "header wrapping"
+This operator line-wraps its argument in a way useful for headers.
+The &'cols'& value gives the column number to wrap after,
+the &'limit'& gives a limit number of result characters to truncate at.
+Either just the &'limit'& and the preceding underbar, or both, can be omitted;
+the defaults are 80 and 998.
+Wrapping will be inserted at a space if possible before the
+column number is reached.
+Whitespace at a chosen wrap point is removed.
+A line-wrap consists of a newline followed by a tab,
+and the tab is counted as 8 columns.
+
+
+
.vitem &*${hex2b64:*&<&'hexstring'&>&*}*&
.cindex "base64 encoding" "conversion from hex"
.cindex "expansion" "hex to base64"
.vitem &*${local_part:*&<&'string'&>&*}*&
.cindex "expansion" "local part extraction"
.cindex "&%local_part%& expansion item"
-The string is interpreted as an RFC 2822 address and the local part is
-extracted from it. If the string does not parse successfully, the result is
-empty.
+The string is interpreted as an
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address and the local part is extracted from it.
+If the string does not parse successfully, the result is empty.
The parsing correctly handles SMTPUTF8 Unicode in the string.
.vitem &*${quote_local_part:*&<&'string'&>&*}*&
.cindex "&%quote_local_part%& expansion item"
This operator is like &%quote%&, except that it quotes the string only if
-required to do so by the rules of RFC 2822 for quoting local parts. For
-example, a plus sign would not cause quoting (but it would for &%quote%&).
+required to do so by the rules of
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+for quoting local parts. For example,
+a plus sign would not cause quoting (but it would for &%quote%&).
If you are creating a new email address from the contents of &$local_part$&
(or any other unknown data), you should always use this operator.
.cindex "expansion" "RFC 2047"
.cindex "RFC 2047" "expansion operator"
.cindex "&%rfc2047%& expansion item"
-This operator encodes text according to the rules of RFC 2047. This is an
+This operator encodes text according to the rules of
+&url(https://www.rfc-editor.org/rfc/rfc2047,RFC 2047). This is an
encoding that is used in header lines to encode non-ASCII characters. It is
assumed that the input string is in the encoding specified by the
&%headers_charset%& option, which gets its default at build time. If the string
.cindex "expansion" "RFC 2047"
.cindex "RFC 2047" "decoding"
.cindex "&%rfc2047d%& expansion item"
-This operator decodes strings that are encoded as per RFC 2047. Binary zero
+This operator decodes strings that are encoded as per
+&url(https://www.rfc-editor.org/rfc/rfc2047,RFC 2047).
+Binary zero
bytes are replaced by question marks. Characters are converted into the
character set defined by &%headers_charset%&. Overlong RFC 2047 &"words"& are
not recognized unless &%check_rfc2047_length%& is set false.
.cindex "&%utf8_localpart_from_alabel%& expansion item"
These convert EAI mail name components between UTF-8 and a-label forms.
For information on internationalisation support see &<<SECTi18nMTA>>&.
+
+
+.vitem &*${xtextd:*&<&'string'&>&*}*&
+.cindex "text forcing in strings"
+.cindex "string" "xtext decoding"
+.cindex "xtext"
+.cindex "&%xtextd%& expansion item"
+This performs xtext decoding of the string (per
+&url(https://www.rfc-editor.org/rfc/rfc3461,RFC 3461) section 4).
+
+
+
.endlist
.endlist
Note that negation of &*forany*& means that the condition must be false for all
items for the overall condition to succeed, and negation of &*forall*& means
-that the condition must be false for at least one item. In this example, the
-list separator is changed to a comma:
+that the condition must be false for at least one item.
+
+Example:
.code
-${if forany{<, $recipients}{match{$item}{^user3@}}{yes}{no}}
+${if forany{$recipients_list}{match{$item}{^user3@}}{yes}{no}}
.endd
The value of &$item$& is saved and restored while &%forany%& or &%forall%& is
being processed, to enable these expansion items to be nested.
SRS decode. See SECT &<<SECTSRS>>& for details.
-.vitem &*inlist&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
- &*inlisti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
+.vitem &*inlist&~{*&<&'subject'&>&*}{*&<&'list'&>&*}*& &&&
+ &*inlisti&~{*&<&'subject'&>&*}{*&<&'list'&>&*}*&
.cindex "string" "comparison"
.cindex "list" "iterative conditions"
Both strings are expanded; the second string is treated as a list of simple
.next
The item @[] matches any of the local host's interface addresses.
.next
-Single-key lookups are assumed to be like &"net-"& style lookups in host lists,
+Single-key lookups are assumed to be like &"net-"& style lookups in host lists
+(see section &<<SECThoslispatsikey>>&),
even if &`net-`& is not specified. There is never any attempt to turn the IP
address into a host name. The most common type of linear search for
&*match_ip*& is likely to be &*iplsearch*&, in which the file can contain CIDR
Consult section &<<SECThoslispatip>>& for further details of these patterns.
+The variable &$value$& will be set for a successful match and can be
+used in the success clause of an &%if%& expansion item using the condition.
+Any previous &$value$& is restored after the if.
+
.vitem &*match_local_part&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
.cindex "domain list" "in expansion condition"
.cindex "address list" "in expansion condition"
.cindex "Radius"
.cindex "expansion" "Radius authentication"
.cindex "&%radius%& expansion condition"
-Radius authentication (RFC 2865) is supported in a similar way to PAM. You must
+Radius authentication
+(&url(https://www.rfc-editor.org/rfc/rfc2865,RFC 2865))
+is supported in a similar way to PAM. You must
set RADIUS_CONFIG_FILE in &_Local/Makefile_& to specify the location of
the Radius client configuration file in order to build Exim with Radius
support.
When, as a result of aliasing or forwarding, a message is directed to a pipe,
this variable holds the pipe command when the transport is running.
+.new
+.vitem &$atrn_host$&
+.vindex ATRN "data for routing"
+When an ATRN command is accepted, this variable is filled in with the client
+IP and port, for use in a manualroute router.
+.wen
+
.vitem "&$auth1$& &-- &$auth4$&"
.vindex "&$auth1$&, &$auth2$&, etc"
These variables are used in SMTP authenticators (see chapters
.vindex "&$config_file$&"
The name of the main configuration file Exim is using.
+.vitem &$connection_id$&
+.vindex "&$connection_id$&"
+.cindex connection "identifier logging"
+An identifier for the accepted connection, for use in custom logging.
+
.vitem &$dkim_verify_status$&
Results of DKIM verification.
For details see section &<<SECDKIMVFY>>&.
a colon-separated list of signer domains and identities for the message.
For details see section &<<SECDKIMVFY>>&.
-.vitem &$dmarc_domain_policy$& &&&
+.vitem &$dmarc_alignment_spf$& &&&
+ &$dmarc_alignment_dkim$& &&&
+ &$dmarc_domain_policy$& &&&
&$dmarc_status$& &&&
&$dmarc_status_text$& &&&
&$dmarc_used_domains$&
rejections of MAIL and rejections of RCPT.
.tvar &$recipients$&
-This variable contains a list of envelope recipients for a message. A comma and
-a space separate the addresses in the replacement text. However, the variable
-is not generally available, to prevent exposure of Bcc recipients in
-unprivileged users' filter files. You can use &$recipients$& only in these
+.tvar &$recipients_list$&
+These variables both contain the envelope recipients for a message.
+
+The first uses a comma and a space separate the addresses in the replacement text.
+&*Note*&: an address can legitimately contain a comma;
+this variable is not intended for further processing.
+
+The second is a proper Exim list; colon-separated.
+
+However, the variables
+are not generally available, to prevent exposure of Bcc recipients in
+unprivileged users' filter files. You can use either of them only in these
cases:
.olist
.cindex "router" "name"
.cindex "name" "of router"
.vindex "&$router_name$&"
-During the running of a router this variable contains its name.
+During the running of a router, or a transport called,
+this variable contains the router name.
.vitem &$runrc$&
.cindex "return code" "from &%run%& expansion"
single connection is being processed. When a child process terminates, the
daemon decrements its copy of the variable.
+.vitem &$smtp_notquit_reason$&
+.vindex "&$smtp_notquit_reason$&"
+When the not-QUIT ACL is running, this variable is set to a string
+that indicates the reason for the termination of the SMTP connection.
+
.vitem "&$sn0$& &-- &$sn9$&"
These variables are copies of the values of the &$n0$& &-- &$n9$& accumulators
that were current at the end of the system filter file. This allows a system
.code
tls_on_connect_ports = 465
.endd
-per RFC 8314.
+per &url(https://www.rfc-editor.org/rfc/rfc8314,RFC 8314).
There is also a command line option &%-tls-on-connect%&, which forces all ports
to behave in this way when a daemon is started.
.row &%acl_not_smtp%& "ACL for non-SMTP messages"
.row &%acl_not_smtp_mime%& "ACL for non-SMTP MIME parts"
.row &%acl_not_smtp_start%& "ACL for start of non-SMTP message"
+.row &%acl_smtp_atrn%& "ACL for ATRN"
.row &%acl_smtp_auth%& "ACL for AUTH"
.row &%acl_smtp_connect%& "ACL for connection"
.row &%acl_smtp_data%& "ACL for DATA"
.row &%acl_smtp_rcpt%& "ACL for RCPT"
.row &%acl_smtp_starttls%& "ACL for STARTTLS"
.row &%acl_smtp_vrfy%& "ACL for VRFY"
+.row &%acl_smtp_wellknown%& "ACL for WELLKNOWN"
.row &%av_scanner%& "specify virus scanner"
.row &%check_rfc2047_length%& "check length of RFC 2047 &""encoded &&&
words""&"
.row &%dsn_advertise_hosts%& "advertise DSN extensions to these hosts"
.row &%ignore_fromline_hosts%& "allow &""From ""& from these hosts"
.row &%ignore_fromline_local%& "allow &""From ""& from local SMTP"
+.row &%limits_advertise_hosts%& "advertise LIMITS to these hosts"
.row &%pipelining_advertise_hosts%& "advertise pipelining to these hosts"
.row &%pipelining_connect_advertise_hosts%& "advertise pipelining to these hosts"
.row &%prdr_enable%& "advertise PRDR to all hosts"
.row &%smtputf8_advertise_hosts%& "advertise SMTPUTF8 to these hosts"
.row &%tls_advertise_hosts%& "advertise TLS to these hosts"
+.row &%wellknown_advertise_hosts%& "advertise WELLKNOWN to these hosts"
.endtable
.cindex "&ACL;" "for non-SMTP messages"
.cindex "non-SMTP messages" "ACLs for"
This option defines the ACL that is run when a non-SMTP message has been
-read and is on the point of being accepted. See chapter &<<CHAPACL>>& for
+read and is on the point of being accepted. See section &<<SECnonSMTP>>& for
further details.
.option acl_not_smtp_mime main string&!! unset
.cindex "&ACL;" "at start of non-SMTP message"
.cindex "non-SMTP messages" "ACLs for"
This option defines the ACL that is run before Exim starts reading a
-non-SMTP message. See chapter &<<CHAPACL>>& for further details.
+non-SMTP message. See section &<<SECnonSMTP>>& for further details.
+
+.new
+.option acl_smtp_atrn main string&!! unset
+.cindex ATRN "ACL for"
+.cindex ATRN advertisement
+.cindex "ESMTP extensions" ATRN
+This option defines the ACL that is run when an SMTP ATRN command is
+received.
+If no value is set, or the result after expansion is an empty string,
+then the ATRN facility is not advertised.
+See chapter &<<CHAPACL>>& for general information on ACLs,
+and section &<<SECTATRN>>& for description of ATRN.
+.wen
.option acl_smtp_auth main string&!! unset
.cindex "&ACL;" "setting up for SMTP commands"
.cindex "AUTH" "ACL for"
This option defines the ACL that is run when an SMTP AUTH command is
-received. See chapter &<<CHAPACL>>& for further details.
+received.
+See chapter &<<CHAPACL>>& for general information on ACLs, and chapter
+&<<CHAPSMTPAUTH>>& for details of authentication.
.option acl_smtp_connect main string&!! unset
.cindex "&ACL;" "on SMTP connection"
This option defines the ACL that is run when an SMTP connection is received.
-See chapter &<<CHAPACL>>& for further details.
+See section &<<SECconnectACL>>& for further details.
.option acl_smtp_data main string&!! unset
.cindex "DATA" "ACL for"
This option defines the ACL that is run after an SMTP DATA command has been
processed and the message itself has been received, but before the final
-acknowledgment is sent. See chapter &<<CHAPACL>>& for further details.
+acknowledgment is sent. See section &<<SECdataACLS>>& for further details.
.option acl_smtp_data_prdr main string&!! accept
.cindex "PRDR" "ACL for"
if the PRDR feature has been negotiated,
is run for each recipient after an SMTP DATA command has been
processed and the message itself has been received, but before the
-acknowledgment is sent. See chapter &<<CHAPACL>>& for further details.
+acknowledgment is sent. See section &<<SECTPRDRACL>>& for further details.
.option acl_smtp_dkim main string&!! unset
.cindex DKIM "ACL for"
.option acl_smtp_etrn main string&!! unset
.cindex "ETRN" "ACL for"
+.cindex "ETRN" advertisement
This option defines the ACL that is run when an SMTP ETRN command is
-received. See chapter &<<CHAPACL>>& for further details.
+received.
+If no value is set then the ETRN facility is not advertised.
+See chapter &<<CHAPACL>>& for general information on ACLs,
+and section &<<SECTETRN>>& for description of ETRN.
.option acl_smtp_expn main string&!! unset
.cindex "EXPN" "ACL for"
.cindex "EHLO" "ACL for"
.cindex "HELO" "ACL for"
This option defines the ACL that is run when an SMTP EHLO or HELO
-command is received. See chapter &<<CHAPACL>>& for further details.
+command is received. See section &<<SECheloACL>>& for further details.
.option acl_smtp_mail main string&!! unset
.option acl_smtp_mailauth main string&!! unset
.cindex "AUTH" "on MAIL command"
This option defines the ACL that is run when there is an AUTH parameter on
-a MAIL command. See chapter &<<CHAPACL>>& for details of ACLs, and chapter
+a MAIL command.
+See chapter &<<CHAPACL>>& for general information on ACLs, and chapter
&<<CHAPSMTPAUTH>>& for details of authentication.
.option acl_smtp_mime main string&!! unset
.cindex "not-QUIT, ACL for"
This option defines the ACL that is run when an SMTP session
ends without a QUIT command being received.
-See chapter &<<CHAPACL>>& for further details.
+See section &<<SECTNOTQUITACL>>& for further details.
.option acl_smtp_predata main string&!! unset
This option defines the ACL that is run when an SMTP DATA command is
.option acl_smtp_rcpt main string&!! unset
.cindex "RCPT" "ACL for"
This option defines the ACL that is run when an SMTP RCPT command is
-received. See chapter &<<CHAPACL>>& for further details.
+received. See section &<<SECTQUITACL>>& for further details.
.option acl_smtp_starttls main string&!! unset
.cindex "STARTTLS, ACL for"
This option defines the ACL that is run when an SMTP VRFY command is
received. See chapter &<<CHAPACL>>& for further details.
+.option acl_smtp_wellknown main string&!! unset
+.cindex "WELLKNOWN, ACL for"
+This option defines the ACL that is run when an SMTP WELLKNOWN command is
+received. See section &<<SECTWELLKNOWNACL>>& for further details.
+
.option add_environment main "string list" empty
.cindex "environment" "set values"
This option adds individual environment variables that the
.option allow_domain_literals main boolean false
.cindex "domain literal"
-If this option is set, the RFC 2822 domain literal format is permitted in
+If this option is set, the
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+domain literal format is permitted in
email addresses. The option is not set by default, because the domain literal
format is not normally required these days, and few people know about it. It
has, however, been exploited by mail abusers.
See section &<<CALLaddparcall>>& for details of how this value is used.
-.option check_log_inodes main integer 100
-See &%check_spool_space%& below.
-
-
-.option check_log_space main integer 10M
+.options check_log_inodes main integer 100 &&&
+ check_log_space main integer 10M
See &%check_spool_space%& below.
.oindex "&%check_rfc2047_length%&"
.cindex "RFC 2047" "disabling length check"
.option check_rfc2047_length main boolean true
-RFC 2047 defines a way of encoding non-ASCII characters in headers using a
+&url(https://www.rfc-editor.org/rfc/rfc2047,RFC 2047)
+defines a way of encoding non-ASCII characters in headers using a
system of &"encoded words"&. The RFC specifies a maximum length for an encoded
word; strings to be encoded that exceed this length are supposed to use
multiple encoded words. By default, Exim does not recognize encoded words that
set false, Exim recognizes encoded words of any length.
-.option check_spool_inodes main integer 100
-See &%check_spool_space%& below.
-
-
-.option check_spool_space main integer 10M
+.options check_spool_inodes main integer 100 &&&
+ check_spool_space main integer 10M
.cindex "checking disk space"
.cindex "disk space, checking"
.cindex "spool directory" "checking space"
.cindex CHUNKING advertisement
.cindex "RFC 3030" "CHUNKING"
.cindex "ESMTP extensions" CHUNKING
-The CHUNKING extension (RFC3030) will be advertised in the EHLO message to
-these hosts.
+The CHUNKING extension
+(&url(https://www.rfc-editor.org/rfc/rfc3030.html,RFC 3030))
+will be advertised in the EHLO message to these hosts.
Hosts may use the BDAT command as an alternate to DATA.
.option commandline_checks_require_admin main boolean &`false`&
listens. See chapter &<<CHAPinterfaces>>& for details of how it is used. For
backward compatibility, &%daemon_smtp_port%& (singular) is a synonym.
-.option daemon_startup_retries main integer 9
+.options daemon_startup_retries main integer 9 &&&
+ daemon_startup_sleep main time 30s
.cindex "daemon startup, retrying"
-This option, along with &%daemon_startup_sleep%&, controls the retrying done by
+These options control the retrying done by
the daemon at startup when it cannot immediately bind a listening socket
(typically because the socket is already in use): &%daemon_startup_retries%&
defines the number of retries after the first failure, and
&%daemon_startup_sleep%& defines the length of time to wait between retries.
-.option daemon_startup_sleep main time 30s
-See &%daemon_startup_retries%&.
-
.option delay_warning main "time list" 24h
.cindex "warning of delay"
.cindex "delay warning, specifying"
sha512
.endd
-Note that the acceptance of sha1 violates RFC 8301.
+Note that the acceptance of sha1 violates
+&url(https://www.rfc-editor.org/rfc/rfc8301,RFC 8301).
.option dkim_verify_keytypes main "string list" "ed25519 : rsa"
This option gives a list of key types which are acceptable in signatures,
The list is keyed by the algorithm type for the key; the values are in bits.
Signatures with keys smaller than given by this option will fail verification.
-The default enforces the RFC 8301 minimum key size for RSA signatures.
+The default enforces the
+&url(https://www.rfc-editor.org/rfc/rfc8301,RFC 8301)
+minimum key size for RSA signatures.
.option dkim_verify_minimal main boolean false
If set to true, verification of signatures will terminate after the
See section &<<SECDKIMVFY>>&.
-.option dmarc_forensic_sender main string&!! unset
-.option dmarc_history_file main string unset
-.option dmarc_tld_file main string unset
+.options dmarc_forensic_sender main string&!! unset &&&
+ dmarc_history_file main string unset &&&
+ dmarc_tld_file main string unset
.cindex DMARC "main section options"
These options control DMARC processing.
See section &<<SECDMARC>>& for details.
.code
dns_again_means_nonexist = *.in-addr.arpa
.endd
-This option applies to all DNS lookups that Exim does. It also applies when the
+This option applies to all DNS lookups that Exim does,
+except for TLSA lookups (where knowing about such failures
+is security-relevant).
+It also applies when the
&[gethostbyname()]& or &[getipnodebyname()]& functions give temporary errors,
since these are most likely to be caused by DNS lookup problems. The
&(dnslookup)& router has some options of its own for controlling what happens
.cindex "DSN" "success"
.cindex "Delivery Status Notification" "success"
.cindex "ESMTP extensions" DSN
-DSN extensions (RFC3461) will be advertised in the EHLO message to,
+DSN extensions (&url(https://www.rfc-editor.org/rfc/rfc3461,RFC 3461))
+will be advertised in the EHLO message to,
and accepted from, these hosts.
Hosts may use the NOTIFY and ORCPT options on RCPT TO commands,
and RET and ENVID options on MAIL FROM commands.
.code
errors_reply_to = postmaster@my.domain.example
.endd
-The value of the option is not expanded. It must specify a valid RFC 2822
+The value of the option is not expanded. It must specify a valid
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
address. However, if a warning message that is generated by the
&%quota_warn_message%& option in an &(appendfile)& transport contain its
own &'Reply-To:'& header line, the value of the &%errors_reply_to%& option is
. Allow this long option name to split; give it unsplit as a fifth argument
. for the automatic .oindex that is generated by .option.
+. WAS:
+. .option "extract_addresses_remove_ &~&~arguments"
+. but apparently this results in searchability problems; bug 1197
-.option "extract_addresses_remove_arguments" main boolean true &&&
- extract_addresses_remove_arguments
+.option extract_addresses_remove_arguments main boolean true
.oindex "&%-t%&"
.cindex "command line" "addresses with &%-t%&"
.cindex "Sendmail compatibility" "&%-t%& option"
.option freeze_tell main "string list, comma separated" unset
.cindex "freezing messages" "sending a message when freezing"
+.cindex "frozen messages" "sending a message when freezing"
On encountering certain errors, or when configured to do so in a system filter,
ACL, or special router, Exim freezes a message. This means that no further
delivery attempts take place until an administrator thaws the message, or the
logging that you require.
-.option gecos_name main string&!! unset
+.options gecos_name main string&!! unset &&&
+ gecos_pattern main string unset
.cindex "HP-UX"
.cindex "&""gecos""& field, parsing"
Some operating systems, notably HP-UX, use the &"gecos"& field in the system
gecos_name = $1
.endd
-.option gecos_pattern main string unset
-See &%gecos_name%& above.
-
.option gnutls_compat_mode main boolean unset
This option controls whether GnuTLS is used in compatibility mode in an Exim
.cindex "EHLO" "underscores in"
.cindex "underscore in EHLO/HELO"
This option can be set to a string of rogue characters that are permitted in
-all EHLO and HELO names in addition to the standard letters, digits,
-hyphens, and dots. If you really must allow underscores, you can set
+non-ip-literal EHLO and HELO names in addition to the standard letters, digits,
+hyphens, and dots. For example if you really must allow underscores,
+you can set
.code
helo_allow_chars = _
.endd
+This option does not apply to names that look like ip-literals.
Note that the value is one string, not a list.
nowadays the ACL specified by &%acl_smtp_connect%& can also reject incoming
connections immediately.
+If the connection is on a TLS-on-connect port then the TCP connection is
+just dropped. Otherwise, an SMTP error is sent first.
+
The ability to give an immediate rejection (either by this option or using an
ACL) is provided for use in unusual cases. Many hosts will just try again,
sometimes without much delay. Normally, it is better to use an ACL to reject
.code
hosts_connection_nolog = :
.endd
-.new
The hosts affected by this option also do not log "no MAIL in SMTP connection"
lines, as may commonly be produced by a monitoring system.
-.wen
.option hosts_require_alpn main "host list&!!" unset
&%timeout_frozen_after%&.
-.option ignore_fromline_hosts main "host list&!!" unset
+.options ignore_fromline_hosts main "host list&!!" unset &&&
+ ignore_fromline_local main boolean false
.cindex "&""From""& line"
.cindex "UUCP" "&""From""& line"
Some broken SMTP clients insist on sending a UUCP-like &"From&~"& line before
&%ignore_fromline_local%& must be set to achieve this effect.
-.option ignore_fromline_local main boolean false
-See &%ignore_fromline_hosts%& above.
.option keep_environment main "string list" unset
.cindex "environment" "values from"
+.option limits_advertise_hosts main "host list&!!" *
+.cindex LIMITS "suppressing advertising"
+.cindex "ESMTP extensions" LIMITS
+This option can be used to suppress the advertisement of the SMTP
+LIMITS extension (&url(https://www.ietf.org/rfc/rfc9422.html,RFC 9422))
+to specific hosts.
+If permitted, Exim as a server will advertise in the EHLO response
+the limit for RCPT commands set by the &%recipients_max%& option (if it is set)
+and the limit for MAIL commands set by the &%smtp_accept_max_per_connection%&
+option.
+
.option local_from_check main boolean true
.cindex "&'Sender:'& header line" "disabling addition of"
.cindex "&'From:'& header line" "disabling checking of"
-.option local_from_prefix main string unset
+.options local_from_prefix main string unset &&&
+ local_from_suffix main string unset
When Exim checks the &'From:'& header line of locally submitted messages for
matching the login id (see &%local_from_check%& above), it can be configured to
ignore certain prefixes and suffixes in the local part of the address. This is
qualify domain.
-.option local_from_suffix main string unset
-See &%local_from_prefix%& above.
-
-
.option local_interfaces main "string list" "see below"
This option controls which network interfaces are used by the daemon for
listening; they are also used to identify the local host when routing. Chapter
.option localhost_number main string&!! unset
.cindex "host" "locally unique number for"
.cindex "message ids" "with multiple hosts"
+.cindex multiple "systems sharing a spool"
+.cindex "multiple hosts" "sharing a spool"
+.cindex "shared spool directory"
+.cindex "spool directory" sharing
.vindex "&$localhost_number$&"
Exim's message ids are normally unique only within the local host. If
-uniqueness among a set of hosts is required, each host must set a different
+uniqueness among a set of hosts is required
+(eg. because they share a spool directory),
+each host must set a different
value for the &%localhost_number%& option. The string is expanded immediately
after reading the configuration file (so that a number can be computed from the
host name, for example) and the result of the expansion must be a number in the
range 0&--16 (or 0&--10 on operating systems with case-insensitive file
systems). This is available in subsequent string expansions via the variable
-&$localhost_number$&. When &%localhost_number is set%&, the final two
+&$localhost_number$&. When &%localhost_number%& is set, the final four
characters of the message id, instead of just being a fractional part of the
time, are computed from the time and the local host number as described in
section &<<SECTmessiden>>&.
.option message_id_header_text main string&!! unset
If this variable is set, the string is expanded and used to augment the text of
the &'Message-id:'& header that Exim creates if a locally-originated incoming
-message does not have one. The text of this header is required by RFC 2822 to
-take the form of an address. By default, Exim uses its internal message id as
+message does not have one. The text of this header is required by
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+to take the form of an address. By default, Exim uses its internal message id as
the local part, and the primary host name as the domain. If this option is set,
it is expanded, and provided the expansion is not forced to fail, and does not
yield an empty string, the result is inserted into the header immediately
The option is available only if Exim has been built with Oracle support.
-.new
.option panic_coredump main boolean false
This option is rarely needed but can help for some debugging investigations.
If set, when an internal error is detected by Exim which is sufficient
Note that most systems require additional administrative configuration
to permit write a core file for a setuid program, which is Exim's
common installed configuration.
-.wen
.option percent_hack_domains main "domain list&!!" unset
.cindex "&""percent hack""&"
The &"percent hack"& is the convention whereby a local part containing a
percent sign is re-interpreted as a new email address, with the percent
replaced by @. This is sometimes called &"source routing"&, though that term is
-also applied to RFC 2822 addresses that begin with an @ character. If this
+also applied to
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+addresses that begin with an @ character. If this
option is set, Exim implements the percent facility for those domains listed,
but no others. This happens before an incoming SMTP address is tested against
an ACL.
local parts. Exim's default configuration does this.
-.option perl_at_start main boolean false
-.cindex "Perl"
-This option is available only when Exim is built with an embedded Perl
-interpreter. See chapter &<<CHAPperl>>& for details of its use.
-
-
-.option perl_startup main string unset
+.options perl_at_start main boolean false &&&
+ perl_startup main string unset
.cindex "Perl"
-This option is available only when Exim is built with an embedded Perl
-interpreter. See chapter &<<CHAPperl>>& for details of its use.
+These options are available only when Exim is built with an embedded Perl
+interpreter. See chapter &<<CHAPperl>>& for details of their use.
.option perl_taintmode main boolean false
.cindex "Perl"
The SMTP service extension keyword advertised is &"PIPECONNECT"&;
it permits the client to pipeline
-TCP connection and hello command (inclear phase),
+TCP connection and hello command (cleatext phase),
or TLS-establishment and hello command (encrypted phase),
on later connections to the same host.
characters.
This option also affects the header syntax checks performed by the
-&(autoreply)& transport, and whether Exim uses RFC 2047 encoding of
+&(autoreply)& transport, and whether Exim uses
+&url(https://www.rfc-editor.org/rfc/rfc2047,RFC 2047) encoding of
the user's full name when constructing From: and Sender: addresses (as
described in section &<<SECTconstr>>&). Setting this option can cause
Exim to generate eight bit message headers that do not conform to the
&%queue_only_load%&, and &%smtp_accept_queue%&.
-.option queue_only_file main string unset
+.option queue_only_file main "string list" unset
.cindex "queueing incoming messages"
.cindex "message" "queueing by file existence"
This option can be set to a colon-separated list of absolute path names, each
on at the end (preceded by a semicolon). The string is expanded each time it is
used. If the expansion yields an empty string, no &'Received:'& header line is
added to the message. Otherwise, the string should start with the text
-&"Received:"& and conform to the RFC 2822 specification for &'Received:'&
-header lines.
+&"Received:"& and conform to the
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+specification for &'Received:'& header lines.
The default setting is:
.code
option was not set.
-.option recipients_max main integer 50000
+.option recipients_max main integer&!! 50000
.cindex "limit" "number of recipients"
.cindex "recipient" "maximum number"
-If this option is set greater than zero, it specifies the maximum number of
+If the value resulting from expanding this option
+is set greater than zero, it specifies the maximum number of
original recipients for any message. Additional recipients that are generated
by aliasing or forwarding do not count. SMTP messages get a 452 response for
all recipients over the limit; earlier recipients are delivered as normal.
Non-SMTP messages with too many recipients are failed, and no deliveries are
done.
+For SMTP message the expansion is done after the connection is
+accepted (but before any SMTP conversation) and may depend on
+the IP addresses and port numbers of the connection.
+&*Note*&: If an expansion is used for the option,
+care should be taken that a resonable value results for
+non-SMTP messages.
+
.cindex "RCPT" "maximum number of incoming"
&*Note*&: The RFCs specify that an SMTP server should accept at least 100
RCPT commands in a single message.
.option return_path_remove main boolean true
.cindex "&'Return-path:'& header line" "removing"
-RFC 2821, section 4.4, states that an SMTP server must insert a
+&url(https://www.rfc-editor.org/rfc/rfc2821,RFC 2821), section 4.4,
+states that an SMTP server must insert a
&'Return-path:'& header line into a message when it makes a &"final delivery"&.
The &'Return-path:'& header preserves the sender address as received in the
MAIL command. This description implies that this header should not be present
.option rfc1413_hosts main "host list&!!" @[]
.cindex "RFC 1413"
.cindex "host" "for RFC 1413 calls"
-RFC 1413 identification calls are made to any client host which matches
+&url(https://www.rfc-editor.org/rfc/rfc1413,RFC 1413)
+identification calls are made to any client host which matches
an item in the list.
The default value specifies just this host, being any local interface
for the system.
.option rfc1413_query_timeout main time 0s
.cindex "RFC 1413" "query timeout"
.cindex "timeout" "for RFC 1413 call"
-This sets the timeout on RFC 1413 identification calls. If it is set to zero,
+This sets the timeout on
+&url(https://www.rfc-editor.org/rfc/rfc1413,RFC 1413)
+identification calls. If it is set to zero,
no RFC 1413 calls are ever made.
. searchable. NM changed this occurrence for bug 1197 to no longer allow
. the option name to split.
-.option "smtp_accept_max_per_connection" main integer&!! 1000 &&&
- smtp_accept_max_per_connection
+.option smtp_accept_max_per_connection main integer&!! 1000
.cindex "SMTP" "limiting incoming message count"
.cindex "limit" "messages per SMTP connection"
The value of this option limits the number of MAIL commands that Exim is
. See the comment on smtp_accept_max_per_connection
-.option "smtp_accept_queue_per_connection" main integer 10 &&&
- smtp_accept_queue_per_connection
+.option smtp_accept_queue_per_connection main integer 10
.cindex "queueing incoming messages"
.cindex "message" "queueing by message count"
This option limits the number of delivery processes that Exim starts
.cindex "banner for SMTP"
.cindex "welcome banner for SMTP"
.cindex "customizing" "SMTP banner"
-This string, which is expanded every time it is used, is output as the initial
+If a connect ACL does not supply a message,
+this string (which is expanded every time it is used) is output as the initial
positive response to an SMTP connection. The default setting is:
.code
smtp_banner = $smtp_active_hostname ESMTP Exim \
$version_number $tod_full
.endd
-Failure to expand the string causes a panic error. If you want to create a
+Failure to expand the string causes a panic error;
+a forced fail just closes the connection.
+If you want to create a
multiline response to the initial SMTP connection, use &"\n"& in the string at
appropriate points, but not at the end. Note that the 220 code is not included
in this string. Exim adds it automatically (several times in the case of a
.option smtp_etrn_command main string&!! unset
-.cindex "ETRN" "command to be run"
+.cindex ETRN "command to be run"
.cindex "ESMTP extensions" ETRN
.vindex "&$domain$&"
If this option is set, the given command is run whenever an SMTP ETRN
.option smtp_etrn_serialize main boolean true
-.cindex "ETRN" "serializing"
+.cindex ETRN serializing
When this option is set, it prevents the simultaneous execution of more than
one identical command as a result of ETRN in an SMTP connection. See
section &<<SECTETRN>>& for details.
-.option smtp_ratelimit_hosts main "host list&!!" unset
+.options smtp_ratelimit_hosts main "host list&!!" unset &&&
+ smtp_ratelimit_mail main string unset &&&
+ smtp_ratelimit_rcpt main string unset
.cindex "SMTP" "rate limiting"
.cindex "limit" "rate of message arrival"
.cindex "RCPT" "rate limiting"
delays to RCPT commands when more than four occur in a single message.
-.option smtp_ratelimit_mail main string unset
-See &%smtp_ratelimit_hosts%& above.
-
-
-.option smtp_ratelimit_rcpt main string unset
-See &%smtp_ratelimit_hosts%& above.
-
.option smtp_receive_timeout main time&!! 5m
.cindex "timeout" "for SMTP input"
.cindex ALPN "set acceptable names for server"
If this option is set,
the TLS library supports ALPN,
-and the client offers either more than
+and the client offers either more than one
ALPN name or a name which does not match the list,
the TLS connection is declined.
a default DH prime; the default is Exim-specific but lacks verifiable provenance.
In older versions of Exim the default was the 2048 bit prime described in section
-2.2 of RFC 5114, "2048-bit MODP Group with 224-bit Prime Order Subgroup", which
+2.2 of &url(https://www.rfc-editor.org/rfc/rfc5114,RFC 5114),
+"2048-bit MODP Group with 224-bit Prime Order Subgroup", which
in IKE is assigned number 23.
Otherwise, the option must expand to the name used by Exim for any of a number
-of DH primes specified in RFC 2409, RFC 3526, RFC 5114, RFC 7919, or from other
+of DH primes specified in
+&url(https://www.rfc-editor.org/rfc/rfc2409,RFC 2409),
+&url(https://www.rfc-editor.org/rfc/rfc3526,RFC 3526),
+&url(https://www.rfc-editor.org/rfc/rfc5114,RFC 5114),
+&url(https://www.rfc-editor.org/rfc/rfc7919,RFC 7919), or from other
sources. As names, Exim uses a standard specified name, else "ike" followed by
the number used by IKE, or "default" which corresponds to
&`exim.dev.20160529.3`&.
Some of these will be too small to be accepted by clients.
Some may be too large to be accepted by clients.
The open cryptographic community has suspicions about the integrity of some
-of the later IKE values, which led into RFC7919 providing new fixed constants
-(the "ffdhe" identifiers).
+of the later IKE values, which led into
+&url(https://www.rfc-editor.org/rfc/rfc7919,RFC 7919)
+providing new fixed constants (the "ffdhe" identifiers).
At this point, all of the "ike" values should be considered obsolete;
they are still in Exim to avoid breaking unusual configurations, but are
candidates for removal the next time we have backwards-incompatible changes.
-Two of them in particular (&`ike1`& and &`ike22`&) are called out by RFC 8247
+Two of them in particular (&`ike1`& and &`ike22`&) are called out by
+&url(https://www.rfc-editor.org/rfc/rfc8247,RFC 8247)
as MUST NOT use for IPSEC, and two more (&`ike23`& and &`ike24`&) as
SHOULD NOT.
Because of this, Exim regards them as deprecated; if either of the first pair
acceptable bound from 1024 to 2048.
-.option tls_eccurve main string&!! &`auto`&
+.option tls_eccurve main string list&!! &`auto`&
.cindex TLS "EC cryptography"
-This option selects a EC curve for use by Exim when used with OpenSSL.
-It has no effect when Exim is used with GnuTLS.
+This option selects EC curves for use by Exim when used with OpenSSL.
+It has no effect when Exim is used with GnuTLS
+(the equivalent can be done using a priority string for the
+&%tls_require_ciphers%& option).
-After expansion it must contain a valid EC curve parameter, such as
-&`prime256v1`&, &`secp384r1`&, or &`P-512`&. Consult your OpenSSL manual
-for valid selections.
+After expansion it must contain
+one or (only for OpenSSL versiona 1.1.1 onwards) more
+EC curve names, such as &`prime256v1`&, &`secp384r1`&, or &`P-521`&.
+Consult your OpenSSL manual for valid curve names.
For OpenSSL versions before (and not including) 1.0.2, the string
&`auto`& selects &`prime256v1`&. For more recent OpenSSL versions
&`auto`& tells the library to choose.
-If the option expands to an empty string, no EC curves will be enabled.
+If the option expands to an empty string, the effect is undefined.
.option tls_ocsp_file main string&!! unset
See also &%bounce_message_file%&.
+.option wellknown_advertise_hosts main boolean unset
+.cindex WELLKNOWN advertisement
+.cindex "ESMTP extensions" WELLKNOWN
+This option enables the advertising of the SMTP WELLKNOWN extension.
+See also the &%acl_smtp_wellknown%& ACL (&<<SECTWELLKNOWNACL>>&).
+
.option write_rejectlog main boolean true
.cindex "reject log" "disabling"
If this option is set false, Exim no longer writes anything to the reject log.
.cindex "router" "restricting to specific domains"
.vindex "&$domain_data$&"
If this option is set, the router is skipped unless the current domain matches
-the list. If the match is achieved by means of a file lookup, the data that the
-lookup returned for the domain is placed in &$domain_data$& for use in string
+the list.
+The data returned by the list check
+is placed in &$domain_data$& for use in string
expansions of the driver's private options and in the transport.
See section &<<SECTrouprecon>>& for
a list of the order in which preconditions are evaluated.
+A complex example, using a file like:
+.code
+alice@dom1
+bill@dom1
+maggie@dom1
+.endd
+and checking both domain and local_part
+.code
+domains = ${domain:${lookup {$local_part@$domain} lseach,ret=key {/path/to/accountsfile}}}
+local_parts = ${local_part:${lookup {$local_part@$domain} lseach,ret=key {/path/to/accountsfile}}}
+.endd
+
.option driver routers string unset
.option dsn_lasthop routers boolean false
.cindex "DSN" "success"
.cindex "Delivery Status Notification" "success"
-If this option is set true, and extended DSN (RFC3461) processing is in effect,
+If this option is set true, and extended DSN
+(&url(https://www.rfc-editor.org/rfc/rfc3461,RFC 3461)) processing is in effect,
Exim will not pass on DSN requests to downstream DSN-aware hosts but will
instead send a success DSN as if the next hop does not support DSN.
Not effective on redirect routers.
For security, it would probably be a good idea to restrict the use of this
router to locally-generated messages, using a condition such as this:
.code
- condition = ${if match {$sender_host_address}\
- {\N^(|127\.0\.0\.1)$\N}}
+ condition = ${if match_ip {$sender_host_address} \
+ {<; ; 127.0.0.1 ; ::1}}
.endd
If both &%local_part_prefix%& and &%local_part_suffix%& are set for a router,
local_parts = dbm;/usr/local/specials/$domain_data
.endd
.vindex "&$local_part_data$&"
-If the match is achieved by a lookup, the data that the lookup returned
+the data returned by the list check
for the local part is placed in the variable &$local_part_data$& for use in
expansions of the router's private options or in the transport.
You might use this option, for
.option check_srv dnslookup string&!! unset
.cindex "SRV record" "enabling use of"
-The &(dnslookup)& router supports the use of SRV records (see RFC 2782) in
-addition to MX and address records. The support is disabled by default. To
+The &(dnslookup)& router supports the use of SRV records
+(see &url(https://www.rfc-editor.org/rfc/rfc2782,RFC 2782))
+in addition to MX and address records. The support is disabled by default. To
enable SRV support, set the &%check_srv%& option to the name of the service
required. For example,
.code
This router has no private options. Unless it is being used purely for
verification (see &%verify_only%&) a transport is required to be defined by the
generic &%transport%& option. The router accepts the address if its domain part
-takes the form of an RFC 2822 domain literal. For example, the &(ipliteral)&
+takes the form of an
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+domain literal. For example, the &(ipliteral)&
router handles the address
.code
root@[192.168.1.1]
If the file does not exist, or causes no action to be taken (for example, it is
empty or consists only of comments), the router declines. &*Warning*&: This
is not the case when the file contains syntactically valid items that happen to
-yield empty addresses, for example, items containing only RFC 2822 address
-comments.
+yield empty addresses, for example, items containing only
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address comments.
.cindex "tainted data" "in filenames"
.cindex redirect "tainted data"
it does make a difference if more than one domain is being handled
synonymously.
-If an item begins with &"\"& and the rest of the item parses as a valid RFC
-2822 address that does not include a domain, the item is qualified using the
+If an item begins with &"\"& and the rest of the item parses as a valid
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address that does not include a domain, the item is qualified using the
domain of the incoming address. In the absence of a leading &"\"&, unqualified
addresses are qualified using the value in &%qualify_recipient%&, but you can
force the incoming domain to be used by setting &%qualify_preserve_domain%&.
.cindex "pipe" "in redirection list"
.cindex "address redirection" "to pipe"
An item is treated as a pipe command if it begins with &"|"& and does not parse
-as a valid RFC 2822 address that includes a domain. A transport for running the
+as a valid
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address that includes a domain. A transport for running the
command must be specified by the &%pipe_transport%& option.
Normally, either the router or the transport specifies a user and a group under
which to run the delivery. The default is to use the Exim user and group.
.cindex "file" "in redirection list"
.cindex "address redirection" "to file"
An item is interpreted as a path name if it begins with &"/"& and does not
-parse as a valid RFC 2822 address that includes a domain. For example,
+parse as a valid
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address that includes a domain. For example,
.code
/home/world/minbari
.endd
and are rewritten according to the global rewriting rules.
+.option sieve_inbox redirect string&!! inbox
+.new
+The value of this option is passed to a Sieve filter to specify the
+name of the mailbox used for "keep" operations (explicit or implicit).
+.wen
+
.option sieve_subaddress redirect string&!! unset
The value of this option is passed to a Sieve filter to specify the
:subaddress part of an address.
.cindex "Sieve filter" "syntax errors in"
Syntax errors in a Sieve filter file cause the &"keep"& action to occur. This
-action is specified by RFC 3028. The values of &%skip_syntax_errors%&,
+action is specified by
+&url(https://www.rfc-editor.org/rfc/rfc3028.html,RFC 3028).
+The values of &%skip_syntax_errors%&,
&%syntax_errors_to%&, and &%syntax_errors_text%& are not used.
&%skip_syntax_errors%& can be used to specify that errors in users' forward
For security, it would probably be a good idea to restrict the use of this
router to locally-generated messages, using a condition such as this:
.code
- condition = ${if match {$sender_host_address}\
- {\N^(|127\.0\.0\.1)$\N}}
+ condition = ${if match_ip {$sender_host_address} \
+ {<; ; 127.0.0.1 ; ::1}}
.endd
resent to other recipients.
&*Note:*& If used on a transport handling multiple recipients
-(the smtp transport unless &%rcpt_max%& is 1, the appendfile, pipe or lmtp
+(the smtp transport unless &%max_rcpt%& is 1, the appendfile, pipe or lmtp
transport if &%batch_max%& is greater than 1)
then information about Bcc recipients will be leaked.
Doing so is generally not advised.
mailboxes, this is commonly not displayed by MUAs, and so the user does not
have easy access to it.
-RFC 2821 states that the &'Return-path:'& header is added to a message &"when
+&url(https://www.rfc-editor.org/rfc/rfc2821,RFC 2821)
+states that the &'Return-path:'& header is added to a message &"when
the delivery SMTP server makes the final delivery"&. This implies that this
header should not be present in incoming messages. Exim has a configuration
option, &%return_path_remove%&, which requests removal of this header from
When the message is about to be written out, the command specified by
&%transport_filter%& is started up in a separate, parallel process, and
the entire message, including the header lines, is passed to it on its standard
-input (this in fact is done from a third process, to avoid deadlock). The
-command must be specified as an absolute path.
+input (this in fact is done from a third process, to avoid deadlock).
+The command must be specified as an absolute path.
+
+The process run by the command must use its standard input as the message
+data to be transformed, and write the results on its standard output.
The lines of the message that are written to the transport filter are
terminated by newline (&"\n"&). The message is passed to the filter before any
are all run in parallel, like a shell pipeline.
The filter can perform any transformations it likes, but of course should take
-care not to break RFC 2822 syntax. Exim does not check the result, except to
+care not to break
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+syntax. Exim does not check the result, except to
test for a final newline when SMTP is in use. All messages transmitted over
SMTP must end with a newline, so Exim supplies one if it is missing.
transport_filter = '/bin/cmd${if eq{$host}{a.b.c}{1}{2}}'
.endd
This runs the command &(/bin/cmd1)& if the host name is &'a.b.c'&, and
-&(/bin/cmd2)& otherwise. If double quotes had been used, they would have been
+&(/bin/cmd2)& otherwise.
+
+Option strings in general have any fully-surrounding double quote wrapping
+removed early in parsing (see &<<SECTstrings>>&).
+Then, for this option, quotes protect against whitespace being
+regarded as a separator while splitting into the command argument vector.
+Either double or single quotes can be used here;
+the former interprets backlash-quoted charachters
+and the latter does not.
+
+If double quotes had been used in this example, they would have been
stripped by Exim when it read the option's value. When the value is used, if
the single quotes were missing, the line would be split into two items,
&`/bin/cmd${if`& and &`eq{$host}{a.b.c}{1}{2}`&, and an error would occur when
.endd
In this situation, the expansion of &%file%& or &%directory%& in the transport
must transform the relative path into an appropriate absolute filename. In the
-case of Sieve filters, the name &'inbox'& must be handled. It is the name that
+case of Sieve filters, the name &'inbox'& must be handled. It is the
+.new
+default
+.wen
+name that
is used as a result of a &"keep"& action in the filter. This example shows one
way of handling this requirement:
.code
location, absolute paths are used without change, and other folders are in the
&_mail_& directory within the home directory.
+.new
+An alternative for the &"keep"& aspect is to use the &%sieve_inbox%& option
+on the redirect router that calls the Sieve filter,
+to explicitly set the filename used.
+.wen
+
&*Note 1*&: While processing an Exim filter, a relative path such as
&_folder23_& is turned into an absolute path if a home directory is known to
the router. In particular, this is the case if &%check_local_user%& is set. If
&*Note 2*&: An absolute path in &$address_file$& is not treated specially;
the &%file%& or &%directory%& option is still used if it is set.
+.new
+&*Note 3*&: Permitting a user to enable writes to an absolute path
+may be a security issue.
+.wen
the message to be transmitted. Instead, it generates a new mail message as an
automatic reply to the incoming message. &'References:'& and
&'Auto-Submitted:'& header lines are included. These are constructed according
-to the rules in RFCs 2822 and 3834, respectively.
+to the rules in RFCs
+&url(https://www.rfc-editor.org/rfc/rfc2822,2822) and
+&url(https://datatracker.ietf.org/doc/html/rfc3834,3834), respectively.
If the router that passes the message to this transport does not have the
&%unseen%& option set, the original message (for the current recipient) is not
.option headers autoreply string&!! unset
-This specifies additional RFC 2822 headers that are to be added to the message
+This specifies additional
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+headers that are to be added to the message
when the message is specified by the transport. Several can be given by using
&"\n"& to separate them. There is no check on the format.
.cindex "transports" "&(lmtp)&"
.cindex "&(lmtp)& transport"
.cindex "LMTP" "over a pipe"
-.cindex "LMTP" "over a socket"
-The &(lmtp)& transport runs the LMTP protocol (RFC 2033) over a pipe to a
+.cindex "LMTP" "over a unix-domain socket"
+The &(lmtp)& transport runs the LMTP protocol
+(&url(https://www.rfc-editor.org/rfc/rfc2033,RFC 2033)) over a pipe to a
specified command
or by interacting with a Unix domain socket.
This transport is something of a cross between the &(pipe)& and &(smtp)&
No part of the resulting command may be tainted.
-.option environment pipe string&!! unset
+.option environment pipe "string list&!!" unset
.cindex "&(pipe)& transport" "environment for command"
.cindex "environment" "&(pipe)& transport"
This option is used to add additional variables to the environment in which the
several minutes) to act. To have any effect, the value of this option must be
less than the system timeout. However, it has been observed that on some
systems there is no system timeout, which is why the default value for this
-option is 5 minutes, a value recommended by RFC 1123.
+option is 5 minutes, a value recommended by
+&url(https://www.rfc-editor.org/rfc/rfc1123,RFC 1123).
.option connection_max_messages smtp integer 500
For testing purposes, this value can be overridden by the &%-oB%& command line
option.
+.cindex "ESMTP extensions" LIMITS
+If the peer advertises a LIMITS extension with a MAILMAX value,
+and either TLSS is in use or was not advertised,
+that value also constrains the result of this option.
+
.option dane_require_tls_ciphers smtp string&!! unset
.cindex "TLS" "requiring specific ciphers for DANE"
Exim can pull out a server name, if there is one, from the response to the
client's SMTP EHLO command.
-The default value of this option:
+For normal STARTTLS use, the default value of this option:
.code
${if and { {match {$host} {.outlook.com\$}} \
{match {$item} {\N^250-([\w.]+)\s\N}} \
} {$1}}
.endd
suffices for one known case.
+
During the expansion of this option the &$item$& variable will have the
server's EHLO response.
+
+For TLS-on-connect connections we do not have an EHLO
+response to use. Because of this the default value of this option is
+set to a static string for those cases, meaning that resumption will
+always be attempted if permitted by the &%tls_resumption_hosts%& option.
+
The result of the option expansion is included in the key used to store and
retrieve the TLS session, for session resumption.
TLS session for any host that matches this list.
&%tls_verify_certificates%& should also be set for the transport.
-.new
The default is &"**"& if DANE is not in use for the connection,
or if DANE-TA us used.
It is empty if DANE-EE is used.
-.wen
.option hosts_require_alpn smtp "host list&!!" unset
.cindex ALPN "require negotiation in client"
.cindex "RFC 7413" "TCP Fast Open"
This option provides a list of servers to which, provided
the facility is supported by this system, Exim will attempt to
-perform a TCP Fast Open.
+perform a TCP Fast Open (&url(https://www.rfc-editor.org/rfc/rfc7413,RFC 7413).
No data is sent on the SYN segment but, if the remote server also
supports the facility, it can send its SMTP banner immediately after
the SYN,ACK segment. This can save up to one round-trip time.
string &`IGNOREQUOTA`& is added to RCPT commands, provided that the LMTP server
has advertised support for IGNOREQUOTA in its response to the LHLO command.
-.option max_rcpt smtp integer 100
+.option max_rcpt smtp integer&!! 100
.cindex "RCPT" "maximum number of outgoing"
-This option limits the number of RCPT commands that are sent in a single
-SMTP message transaction. Each set of addresses is treated independently, and
+This option,
+after expansion,
+limits the number of RCPT commands that are sent in a single
+SMTP message transaction.
+A value setting of zero disables the limit.
+
+If a constant is given,
+each set of addresses is treated independently, and
so can cause parallel connections to the same host if &%remote_max_parallel%&
-permits this. A value setting of zero disables the limit.
+permits this.
+
+.cindex "ESMTP extensions" LIMITS
+If the peer advertises a LIMITS extension with a RCPTMAX value,
+and either TLSS is in use or was not advertised,
+that value also constrains the result of this option
+and no parallel connections will be caused on meeting the RCPTMAX limit.
.option message_linelength_limit smtp integer 998
.cindex "line length" limit
This option sets the maximum line length, in bytes, that the transport
will send. Any messages with lines exceeding the given value
+(before a transport filter, if any)
will fail and a failure-DSN ("bounce") message will if possible be returned
to the sender.
The default value is that defined by the SMTP standards.
only messages having the domain used for the DANE TLSA lookup are
sent on the connection.
+.cindex "ESMTP extensions" LIMITS
+If the peer advertises a LIMITS extension with a RCPTDOMAINMAX value,
+and either TLSS is in use or was not advertised,
+this option is regarded as being false.
+
+
.option port smtp string&!! "see below"
.cindex "port" "sending TCP/IP"
.cindex "TCP/IP" "setting outgoing port"
.vindex "&$port$&"
If this option is set to &"lmtp"& instead of &"smtp"&, the default value for
the &%port%& option changes to &"lmtp"&, and the transport operates the LMTP
-protocol (RFC 2033) instead of SMTP. This protocol is sometimes used for local
+protocol
+(&url(https://www.rfc-editor.org/rfc/rfc2033,RFC 2033)) instead of SMTP.
+This protocol is sometimes used for local
deliveries into closed message stores. Exim also has support for running LMTP
over a pipe to a local process &-- see chapter &<<CHAPLMTP>>&.
+&*Note*&: When using LMTP it should be considered whether the default values
+for some other features, such as DANE, are appropriate.
+
If this option is set to &"smtps"&, the default value for the &%port%& option
changes to &"smtps"&, and the transport initiates TLS immediately after
connecting, as an outbound SSL-on-connect, instead of using STARTTLS to upgrade.
The Internet standards bodies used to strongly discourage use of this mode,
-but as of RFC 8314 it is preferred over STARTTLS for message submission
+but as of &url(https://www.rfc-editor.org/rfc/rfc8314,RFC 8314) it is preferred
+over STARTTLS for message submission
(as distinct from MTA-MTA communication).
while verifying the server certificate,
checks will be included on the host name
(note that this will generally be the result of a DNS MX lookup)
-versus Subject and Subject-Alternate-Name fields. Wildcard names are permitted
+versus the Subject-Alternate-Name (or, if none, Subject-Name) fields.
+Wildcard names are permitted,
limited to being the initial component of a 3-or-more component FQDN.
There is no equivalent checking on client certificates.
.cindex "testing" "rewriting"
Exim's input rewriting configuration appears in a part of the runtime
configuration file headed by &"begin rewrite"&. It can be tested by the
-&%-brw%& command line option. This takes an address (which can be a full RFC
-2822 address) as its argument. The output is a list of how the address would be
+&%-brw%& command line option. This takes an address (which can be a full
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address) as its argument. The output is a list of how the address would be
transformed by the rewriting rules for each of the different places it might
appear in an incoming message, that is, for each different header and for the
envelope sender and recipient fields. For example,
.vindex "&$domain$&"
.vindex "&$local_part$&"
This form of rewrite rule allows for the handling of addresses that are not
-compliant with RFCs 2821 and 2822 (for example, &"bang paths"& in batched SMTP
+compliant with RFCs
+&url(https://www.rfc-editor.org/rfc/rfc2821,2821) and
+&url(https://www.rfc-editor.org/rfc/rfc2822,2822)
+(for example, &"bang paths"& in batched SMTP
input). Because the input is not required to be a syntactically valid address,
the variables &$local_part$& and &$domain$& are not available during the
expansion of the replacement string. The result of rewriting replaces the
.next
.cindex "rewriting" "whole addresses"
When an address in a header is rewritten, the rewriting normally applies only
-to the working part of the address, with any comments and RFC 2822 &"phrase"&
-left unchanged. For example, rewriting might change
+to the working part of the address, with any comments and
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+&"phrase"& left unchanged. For example, rewriting might change
.code
From: Ford Prefect <fp42@restaurant.hitch.fict.example>
.endd
Sometimes there is a need to replace the whole address item, and this can be
done by adding the flag letter &"w"& to a rule. If this is set on a rule that
causes an address in a header line to be rewritten, the entire address is
-replaced, not just the working part. The replacement must be a complete RFC
-2822 address, including the angle brackets if necessary. If text outside angle
+replaced, not just the working part. The replacement must be a complete
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address, including the angle brackets if necessary. If text outside angle
brackets contains a character whose value is greater than 126 or less than 32
-(except for tab), the text is encoded according to RFC 2047. The character set
+(except for tab), the text is encoded according to
+&url(https://www.rfc-editor.org/rfc/rfc2047,RFC 2047). The character set
is taken from &%headers_charset%&, which gets its default at build time.
When the &"w"& flag is set on a rule that causes an envelope address to be
.scindex IIDauthconf2 "authentication"
The &"authenticators"& section of Exim's runtime configuration is concerned
with SMTP authentication. This facility is an extension to the SMTP protocol,
-described in RFC 2554, which allows a client SMTP host to authenticate itself
+described in
+&url(https://www.rfc-editor.org/rfc/rfc2554,RFC 2554),
+which allows a client SMTP host to authenticate itself
to a server. This is a common way for a server to recognize clients that are
permitted to use it as a relay. SMTP authentication is not of relevance to the
transfer of mail between servers that have no managerial connection with each
AUTH_TLS=yes
.endd
in &_Local/Makefile_&, respectively. The first of these supports the CRAM-MD5
-authentication mechanism (RFC 2195), and the second provides an interface to
-the Cyrus SASL authentication library.
+authentication mechanism
+(&url(https://www.rfc-editor.org/rfc/rfc2195,RFC 2195)),
+and the second provides an interface to the Cyrus SASL authentication library.
The third is an interface to Dovecot's authentication system, delegating the
work via a socket interface.
The fourth provides for negotiation of authentication done via non-SMTP means,
-as defined by RFC 4422 Appendix A.
+as defined by &url(https://www.rfc-editor.org/rfc/rfc4422,RFC 4422) Appendix A.
The fifth provides an interface to the GNU SASL authentication library, which
provides mechanisms but typically not data sources.
The sixth provides direct access to Heimdal GSSAPI, geared for Kerberos, but
supporting setting a server keytab.
The seventh can be configured to support
-the PLAIN authentication mechanism (RFC 2595) or the LOGIN mechanism, which is
+the PLAIN authentication mechanism
+(&url(https://www.rfc-editor.org/rfc/rfc2595,RFC 2595))
+or the LOGIN mechanism, which is
not formally documented, but used by several MUAs.
The eighth authenticator
supports Microsoft's &'Secure Password Authentication'& mechanism.
.option public_name authenticators string unset
This option specifies the name of the authentication mechanism that the driver
implements, and by which it is known to the outside world. These names should
-contain only upper case letters, digits, underscores, and hyphens (RFC 2222),
+contain only upper case letters, digits, underscores, and hyphens
+(&url(https://www.rfc-editor.org/rfc/rfc2222,RFC 2222)),
but Exim in fact matches them caselessly. If &%public_name%& is not set, it
defaults to the driver's instance name.
Successful authentication sets up information used by the
&%authresults%& expansion item.
-.new
.cindex authentication "failure event, server"
If an authenticator is run and does not succeed,
-an event (see &<<CHAPevents>>&) of type "auth:fail" is raised.
+an event of type "auth:fail" is raised.
While the event is being processed the variables
&$sender_host_authenticated$& (with the authenticator name)
and &$authenticated_fail_id$& (as set by the authenticator &%server_set_id%& option)
will be valid.
If the event is serviced and a string is returned then the string will be logged
instead of the default log line.
-See <<CHAPevents>> for details on events.
-.wen
+See &<<CHAPevents>>& for details on events.
-.section "Testing server authentication" "SECID169"
+.subsection "Testing server authentication" "SECID169"
.cindex "authentication" "testing a server"
.cindex "AUTH" "testing a server"
.cindex "base64 encoding" "creating authentication test data"
try again later. If there are any backup hosts available, they are tried in the
usual way.
-.new
.next
.cindex authentication "failure event, client"
If the response to authentication is a permanent error (5&'xx'& code),
-an event (see &<<CHAPevents>>&) of type "auth:fail" is raised.
+an event of type "auth:fail" is raised.
While the event is being processed the variable
&$sender_host_authenticated$& (with the authenticator name)
will be valid.
If the event is serviced and a string is returned then the string will be logged.
-See <<CHAPevents>> for details on events.
-.wen
+See &<<CHAPevents>>& for details on events.
.next
If the response to authentication is a permanent error (5&'xx'& code), Exim
-.section "The PLAIN authentication mechanism" "SECID172"
+.subsection "The PLAIN authentication mechanism" "SECID172"
.cindex "PLAIN authentication mechanism"
.cindex authentication PLAIN
.cindex "binary zero" "in &(plaintext)& authenticator"
-The PLAIN authentication mechanism (RFC 2595) specifies that three strings be
+The PLAIN authentication mechanism
+(&url(https://www.rfc-editor.org/rfc/rfc2595,RFC 2595))
+specifies that three strings be
sent as one item of data (that is, one combined string containing two NUL
separators). The data is sent either as part of the AUTH command, or
subsequently in response to an empty prompt from the server.
writing the test makes the logic clearer.
-.section "The LOGIN authentication mechanism" "SECID173"
+.subsection "The LOGIN authentication mechanism" "SECID173"
.cindex "LOGIN authentication mechanism"
.cindex authentication LOGIN
The LOGIN authentication mechanism is not documented in any RFC, but is in use
uninterpreted string.
-.section "Support for different kinds of authentication" "SECID174"
+.subsection "Support for different kinds of authentication" "SECID174"
A number of string expansion features are provided for the purpose of
interfacing to different ways of user authentication. These include checking
traditionally encrypted passwords from &_/etc/passwd_& (or equivalent), PAM,
.scindex IIDcramauth2 "authenticators" "&(cram_md5)&"
.cindex "CRAM-MD5 authentication mechanism"
.cindex authentication CRAM-MD5
-The CRAM-MD5 authentication mechanism is described in RFC 2195. The server
+The CRAM-MD5 authentication mechanism is described in
+&url(https://www.rfc-editor.org/rfc/rfc2195,RFC 2195). The server
sends a challenge string to the client, and the response consists of a user
name and the CRAM-MD5 digest of the challenge string combined with a secret
string (password) which is known to both server and client. Thus, the secret
at A L Digital Ltd.
The &(cyrus_sasl)& authenticator provides server support for the Cyrus SASL
-library implementation of the RFC 2222 (&"Simple Authentication and Security
+library implementation of the
+&url(https://www.rfc-editor.org/rfc/rfc2222,RFC 2222)
+(&"Simple Authentication and Security
Layer"&). This library supports a number of authentication mechanisms,
including PLAIN and LOGIN, but also several others that Exim does not support
directly. In particular, there is support for Kerberos authentication.
Note that Dovecot must be configured to use auth-client not auth-userdb.
If you are using Dovecot to authenticate POP/IMAP clients, it might be helpful
to use the same mechanisms for SMTP authentication. This is a server
-authenticator only. There is only one option:
+authenticator only. There is only one non-generic option:
.option server_socket dovecot string unset
dovecot_plain:
driver = dovecot
public_name = PLAIN
+ server_advertise_condition = ${if def:tls_in_cipher}
server_socket = /var/run/dovecot/auth-client
server_set_id = $auth1
server_socket = /var/run/dovecot/auth-client
server_set_id = $auth1
.endd
+
+&*Note*&: plaintext authentication methods such as PLAIN and LOGIN
+should not be advertised on cleartext SMTP connections.
+See the discussion in section &<<SECTplain_TLS>>&.
+
If the SMTP connection is encrypted, or if &$sender_host_address$& is equal to
&$received_ip_address$& (that is, the connection is local), the &"secured"&
option is passed in the Dovecot authentication command. If, for a TLS
Password Authentication'& mechanism,
which is also sometimes known as NTLM (NT LanMan). The code for client side of
this authenticator was contributed by Marc Prud'hommeaux, and much of it is
-taken from the Samba project (&url(https://www.samba.org/)). The code for the
+taken from the &url(https://www.samba.org/,Samba project). The code for the
server side was subsequently contributed by Tom Kistner. The mechanism works as
follows:
.cindex "Certificate-based authentication"
The &(external)& authenticator provides support for
authentication based on non-SMTP information.
-The specification is in RFC 4422 Appendix A
-(&url(https://tools.ietf.org/html/rfc4422)).
+The specification is in
+&url(https://tools.ietf.org/html/rfc4422,RFC 4422) Appendix A.
It is only a transport and negotiation mechanism;
the process of authentication is entirely controlled
by the server configuration.
this authentication method on a secure (eg. under TLS) connection.
One possible use, compatible with the
-K-9 Mail Android client (&url(https://k9mail.github.io/)),
+&url(https://k9mail.github.io/,K-9 Mail Android client)
is for using X509 client certificates.
It thus overlaps in function with the TLS authenticator
(see &<<CHAPTLS>>&).
If an authenticator of this type is configured it is
-run before any SMTP-level communication is done,
+run immediately after a TLS connection being negotiated
+(due to either STARTTLS or TLS-on-connect)
and can authenticate the connection.
-If it does, SMTP authentication is not offered.
+If it does, SMTP authentication is not subsequently offered.
A maximum of one authenticator of this type may be present.
level, and in particular, the way that public keys, private keys, and
certificates are used.
-RFC 3207 defines how SMTP connections can make use of encryption. Once a
+&url(https://www.rfc-editor.org/rfc/rfc3207,RFC 3207)
+defines how SMTP connections can make use of encryption. Once a
connection is established, the client issues a STARTTLS command. If the
server accepts this, the client and the server negotiate an encryption
mechanism. If the negotiation succeeds, the data that subsequently passes
.cindex "SMTP" "ssmtp protocol"
.cindex "SMTP" "smtps protocol"
The history of port numbers for TLS in SMTP is a little messy and has been
-contentious. As of RFC 8314, the common practice of using the historically
+contentious. As of
+&url(https://www.rfc-editor.org/rfc/rfc8314,RFC 8314),
+the common practice of using the historically
allocated port 465 for "email submission but with TLS immediately upon connect
instead of using STARTTLS" is officially blessed by the IETF, and recommended
by them in preference to STARTTLS.
.vindex "&$tls_in_peerdn$&"
.vindex "&$tls_out_peerdn$&"
Distinguished Name (DN) strings reported by the OpenSSL library use a slash for
-separating fields; GnuTLS uses commas, in accordance with RFC 2253. This
+separating fields; GnuTLS uses commas, in accordance with
+&url(https://www.rfc-editor.org/rfc/rfc2253,RFC 2253). This
affects the value of the &$tls_in_peerdn$& and &$tls_out_peerdn$& variables.
.next
OpenSSL identifies cipher suites using hyphens as separators, for example:
(If an API is found to let OpenSSL be configured in this way,
let the Exim Maintainers know and we'll likely use it).
.next
-With GnuTLS, if an explicit list is used for the &%tls_privatekey%& main option
-main option, it must be ordered to match the &%tls_certificate%& list.
+With GnuTLS, if an explicit list is used for the &%tls_privatekey%& main option,
+it must be ordered to match the &%tls_certificate%& list.
.next
Some other recently added features may only be available in one or the other.
This should be documented with the feature. If the documentation does not
The value &"system"& results in no caching under GnuTLS.
The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
-is acceptable in configurations for the Exim executavble.
+is acceptable in configurations for the Exim executable.
Caching of the system Certificate Authorities bundle can
-save siginificant time and processing on every TLS connection
+save significant time and processing on every TLS connection
accepted by Exim.
The value &"system"& results in no caching under GnuTLS.
The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
-is acceptable in configurations for the Exim executavble.
+is acceptable in configurations for the Exim executable.
Caching of the system Certificate Authorities bundle can
-save siginificant time and processing on every TLS connection
+save significant time and processing on every TLS connection
initiated by Exim.
.oindex "&%tls_in_sni%&"
With TLS1.0 or above, there is an extension mechanism by which extra
information can be included at various points in the protocol. One of these
-extensions, documented in RFC 6066 (and before that RFC 4366) is
+extensions, documented in
+&url(https://www.rfc-editor.org/rfc/rfc6066,RFC 6066)
+(and before that &url(https://www.rfc-editor.org/rfc/rfc4366,RFC 4366)) is
&"Server Name Indication"&, commonly &"SNI"&. This extension is sent by the
client in the initial handshake, so that the server can examine the servername
within and possibly choose to use different certificates and keys (and more)
The client for the connection proposes a set of protocol names, and
the server responds with a selected one.
It is not, as of 2021, commonly used for SMTP connections.
-However, to guard against misirected or malicious use of web clients
+However, to guard against misdirected or malicious use of web clients
(which often do use ALPN) against MTA ports, Exim by default check that
there is no incompatible ALPN specified by a client for a TLS connection.
If there is, the connection is rejected.
&%tls_alpn%& and &%hosts_require_alpn%&.
There are no variables providing observability.
Some feature-specific logging may appear on denied connections, but this
-depends on the behavious of the peer
+depends on the behaviour of the peer
(not all peers can send a feature-specific TLS Alert).
This feature is available when Exim is built with
.section "TLS Resumption" "SECTresumption"
.cindex TLS resumption
TLS Session Resumption for TLS 1.2 and TLS 1.3 connections can be used (defined
-in RFC 5077 for 1.2). The support for this requires GnuTLS 3.6.3 or OpenSSL 1.1.1
-(or later).
+in &url(https://www.rfc-editor.org/rfc/rfc5077,RFC 5077) for 1.2).
+The support for this requires GnuTLS 3.6.3 or OpenSSL 1.1.1 (or later).
Session resumption (this is the "stateless" variant) involves the server sending
a "session ticket" to the client on one connection, which can be stored by the
.next
Add TLSA DNS records. These say what the server certificate for a TLS connection should be.
.next
-Offer a server certificate, or certificate chain, in TLS connections which is is anchored by one of the TLSA records.
+Offer a server certificate, or certificate chain, in TLS connections which is anchored by one of the TLSA records.
.endlist
There are no changes to Exim specific to server-side operation of DANE.
.subsection General
Under GnuTLS, DANE is only supported from version 3.0.0 onwards.
-DANE is specified in published RFCs and decouples certificate authority trust
+DANE is specified in &url(https://www.rfc-editor.org/rfc/rfc6698,RFC 6698).
+It decouples certificate authority trust
selection from a "race to the bottom" of "you must trust everything for mail
to get through".
-There is an alternative technology called MTA-STS, which
-instead publishes MX trust anchor information on an HTTPS website. At the
-time this text was last updated, MTA-STS was still a draft, not yet an RFC.
+It does retain the need to trust the assurances provided by the DNSSEC tree.
+
+There is an alternative technology called MTA-STS
+(&url(https://www.rfc-editor.org/rfc/rfc8461,RFC 8461)), which
+instead publishes MX trust anchor information on an HTTPS website.
+The discovery of the address for that website does not (per standard)
+require DNSSEC, and could be regarded as being less secure than DANE
+as a result.
+
Exim has no support for MTA-STS as a client, but Exim mail server operators
can choose to publish information describing their TLS configuration using
MTA-STS to let those clients who do use that protocol derive trust
.cindex "&ACL;" "options for specifying"
In order to cause an ACL to be used, you have to name it in one of the relevant
options in the main part of the configuration. These options are:
+.cindex "ATRN" "ACL for"
.cindex "AUTH" "ACL for"
.cindex "DATA" "ACLs for"
+.cindex "DKIM" "ACL for"
.cindex "ETRN" "ACL for"
.cindex "EXPN" "ACL for"
.cindex "HELO" "ACL for"
.cindex "EHLO" "ACL for"
-.cindex "DKIM" "ACL for"
.cindex "MAIL" "ACL for"
-.cindex "QUIT, ACL for"
+.cindex "QUIT" "ACL for"
+.cindex "PRDR" "ACL for"
.cindex "RCPT" "ACL for"
.cindex "STARTTLS, ACL for"
.cindex "VRFY" "ACL for"
+.cindex "WELLKNOWN" "ACL for"
.cindex "SMTP" "connection, ACL for"
.cindex "non-SMTP messages" "ACLs for"
.cindex "MIME content scanning" "ACL for"
-.cindex "PRDR" "ACL for"
.table2 140pt
.irow &%acl_not_smtp%& "ACL for non-SMTP messages"
.irow &%acl_not_smtp_mime%& "ACL for non-SMTP MIME parts"
.irow &%acl_not_smtp_start%& "ACL at start of non-SMTP message"
+.irow &%acl_smtp_atrn%& "ACL for ATRN"
.irow &%acl_smtp_auth%& "ACL for AUTH"
.irow &%acl_smtp_connect%& "ACL for start of SMTP connection"
.irow &%acl_smtp_data%& "ACL after DATA is complete"
.irow &%acl_smtp_rcpt%& "ACL for RCPT"
.irow &%acl_smtp_starttls%& "ACL for STARTTLS"
.irow &%acl_smtp_vrfy%& "ACL for VRFY"
+.irow &%acl_smtp_wellknown%& "ACL for WELLKNOWN"
.endtable
For example, if you set
testing as possible at RCPT time.
-.subsection "The non-SMTP ACLs" SECID190
+.subsection "The non-SMTP ACLs" SECnonSMTP
.cindex "non-SMTP messages" "ACLs for"
The non-SMTP ACLs apply to all non-interactive incoming messages, that is, they
apply to batched SMTP as well as to non-SMTP messages. (Batched SMTP is not
temporary error for these kinds of message.
-.subsection "The SMTP connect ACL" SECID191
+.subsection "The SMTP connect ACL" SECconnectACL
.cindex "SMTP" "connection, ACL for"
.oindex &%smtp_banner%&
The ACL test specified by &%acl_smtp_connect%& happens at the start of an SMTP
the message override the banner message that is otherwise specified by the
&%smtp_banner%& option.
-For tls-on-connect connections, the ACL is run after the TLS connection
-is accepted (however, &%host_reject_connection%& is tested before).
+For tls-on-connect connections, the ACL is run before the TLS connection
+is accepted; if the ACL does not accept then the TCP connection is dropped without
+any TLS startup attempt and without any SMTP response being transmitted.
-.subsection "The EHLO/HELO ACL" SECID192
+.subsection "The EHLO/HELO ACL" SECheloACL
.cindex "EHLO" "ACL for"
.cindex "HELO" "ACL for"
The ACL test specified by &%acl_smtp_helo%& happens when the client issues an
an EHLO response.
-.subsection "The DATA ACLs" SECID193
+.subsection "The DATA ACLs" SECdataACLS
.cindex "DATA" "ACLs for"
Two ACLs are associated with the DATA command, because it is two-stage
command, with two responses being sent to the client.
The &%acl_smtp_dkim%& ACL is available only when Exim is compiled with DKIM support
enabled (which is the default).
+If, for a specific message, an ACL control
+&*dkim_disable_verify*&
+has been set, this &%acl_smtp_dkim%& ACL is not called.
+
The ACL test specified by &%acl_smtp_dkim%& happens after a message has been
received, and is executed for each DKIM signature found in a message. If not
otherwise specified, the default action is to accept.
If the ACL is not defined, processing completes as if
the feature was not requested by the client.
+.subsection "The SMTP WELLKNOWN ACL" SECTWELLKNOWNACL
+.cindex "WELLKNOWN" "ACL for"
+.oindex "&%acl_smtp_wellknown%&"
+The &%acl_smtp_wellknown%& ACL is available only when Exim is compiled
+with WELLKNOWN support enabled.
+
+The ACL determines the response to an SMTP WELLKNOWN command, using the normal
+accept/defer/deny verbs for the response code,
+and a new &"control=wellknown"& modifier.
+This modifier takes a single option, separated by a '/'
+character, which must be the name of a file containing the response
+cleartext. The modifier is expanded before use in the usual way before
+it is used. The configuration is responsible for picking a suitable file
+to return and, most importantly, not returning any unexpected file.
+The argument for the SMTP verb will be available in the &$smtp_command_argument$&
+variable and can be used for building the file path.
+If the file path given in the modifier is empty or inacessible, the control will
+fail.
+
+For example:
+.code
+ check_wellknown:
+ accept control = wellknown/\
+ ${lookup {${xtextd:$smtp_command_argument}} \
+ dsearch,key=path,filter=file,ret=full \
+ {$spooldir/wellknown.d}}
+.endd
+File content will be encoded in &"xtext"& form, and line-wrapping
+for line-length limitation will be done before transmission.
+A response summary line will be prepended, with the (pre-encoding) file size.
+
+The above example uses the expansion operator ${xtextd:<coded-string>}
+which is needed to decode the xtext-encoded key from the SMTP verb.
+
+Under the util directory there is a "mailtest" utility which can be used
+to test/retrieve WELLKNOWN items. Syntax is
+.code
+ mailtest -h host.example.com -w security.txt
+.endd
+
+WELLKNOWN is a ESMTP extension providing access to extended
+information about the server. It is modelled on the webserver
+facilities documented in
+&url(https://www.rfc-editor.org/rfc/rfc8615,RFC 8615)
+and can be used for a security.txt file
+and could be used for ACME handshaking
+(&url(https://www.rfc-editor.org/rfc/rfc8555,RFC 8555)).
+
+Exim will advertise WELLKNOWN support in the EHLO response
+.oindex &%wellknown_advertise_hosts%&
+(conditional on a new option &%wellknown_advertise_hosts%&)
+and service WELLKNOWN smtp verbs having a single parameter
+giving a key for an item of "site-wide metadata".
+The verb and key are separated by whitespace,
+and the key is xtext-encoded
+(per &url(https://www.rfc-editor.org/rfc/rfc3461,RFC 3461) section 4).
+
+
.subsection "The QUIT ACL" SECTQUITACL
.cindex "QUIT, ACL for"
The ACL for the SMTP QUIT command is anomalous, in that the outcome of the ACL
{acl_check_rcpt} {acl_check_rcpt_submit} }
.endd
In the default configuration file there are some example settings for
-providing an RFC 4409 message &"submission"& service on port 587 and
-an RFC 8314 &"submissions"& service on port 465. You can use a string
+providing an
+&url(https://www.rfc-editor.org/rfc/rfc4409,RFC 4409)
+message &"submission"& service on port 587 and an
+&url(https://www.rfc-editor.org/rfc/rfc8314,RFC 8314)
+&"submissions"& service on port 465. You can use a string
expansion like this to choose an ACL for MUAs on these ports which is
more appropriate for this purpose than the default ACL on port 25.
&%acl_smtp_mime%&, &%acl_smtp_predata%&, and &%acl_smtp_starttls%&, the action
when the ACL is not defined is &"accept"&.
-For the others (&%acl_smtp_etrn%&, &%acl_smtp_expn%&, &%acl_smtp_rcpt%&, and
-&%acl_smtp_vrfy%&), the action when the ACL is not defined is &"deny"&.
-This means that &%acl_smtp_rcpt%& must be defined in order to receive any
-messages over an SMTP connection. For an example, see the ACL in the default
-configuration file.
-
+.new
+For the others (&%acl_smtp_atrn%&,
+.wen
+&%acl_smtp_etrn%&, &%acl_smtp_expn%&, &%acl_smtp_rcpt%&,
+&%acl_smtp_vrfy%& and &%acl_smtp_wellknown%&),
+the action when the ACL
+is not defined is &"deny"&. This means that &%acl_smtp_rcpt%& must be
+defined in order to receive any messages over an SMTP connection.
+For an example, see the ACL in the default configuration file.
.cindex "&ACL;" "data for non-message ACL"
.vindex &$smtp_command_argument$&
.vindex &$smtp_command$&
-When an ACL is being run for AUTH, EHLO, ETRN, EXPN, HELO, STARTTLS, or VRFY,
+When an ACL is being run for ATRN, AUTH, EHLO, ETRN, EXPN, HELO, STARTTLS, or VRFY,
the remainder of the SMTP command line is placed in &$smtp_command_argument$&,
and the entire SMTP command is available in &$smtp_command$&.
These variables can be tested using a &%condition%& condition. For example,
.section "Format of an ACL" "SECID199"
.cindex "&ACL;" "format of"
.cindex "&ACL;" "verbs, definition of"
-An individual ACL consists of a number of statements. Each statement starts
+An individual ACL definition consists of a number of statements.
+Each statement starts
with a verb, optionally followed by a number of conditions and &"modifiers"&.
Modifiers can change the way the verb operates, define error and log messages,
set variables, insert delays, and vary the processing of accepted messages.
all the conditions make sense at every testing point. For example, you cannot
test a sender address in the ACL that is run for a VRFY command.
+The definition of an ACL ends where another starts,
+or a different configuration section starts.
+
.section "ACL verbs" "SECID200"
The ACL verbs are as follows:
The text in a &%message%& modifier is literal; any quotes are taken as
literals, but because the string is expanded, backslash escapes are processed
-anyway. If the message contains newlines, this gives rise to a multi-line SMTP
+anyway.
+If the message contains newlines, this gives rise to a multi-line SMTP
response.
+A long message line will also be split into multi-line SMTP responses,
+on word boundaries if possible.
.vindex "&$acl_verify_message$&"
While the text is being expanded, the &$acl_verify_message$& variable
immediate writes to file are done as normal.
trigger=<&'reason'&> This option selects cause for the pretrigger buffer
- see above) to be copied to file. A reason of $*now*
+ see above) to be copied to file. A reason of &*now*&
take effect immediately; one of &*paniclog*& triggers
on a write to the panic log.
.endd
the operation and configuration of DKIM, see section &<<SECDKIM>>&.
-.vitem &*control&~=&~dmarc_disable_verify*&
+.vitem &*control&~=&~dmarc_disable_verify*& &&&
+ &*control&~=&~dmarc_enable_forensic*&
.cindex "disable DMARC verify"
-.cindex "DMARC" "disable verify"
-This control turns off DMARC verification processing entirely. For details on
+.cindex DMARC "disable verify"
+.cindex DMARC controls
+.cindex DMARC "forensic mails"
+These control affect DMARC processing. For details on
the operation and configuration of DMARC, see section &<<SECDMARC>>&.
+The &"disable"& turns off DMARC verification processing entirely.
+
.vitem &*control&~=&~dscp/*&<&'value'&>
.cindex "&ACL;" "setting DSCP value"
.vitem &*control&~=&~fakedefer/*&<&'message'&>
.cindex "fake defer"
.cindex "defer, fake"
+.cindex fakedefer
This control works in exactly the same way as &%fakereject%& (described below)
except that it causes an SMTP 450 response after the message data instead of a
550 response. You must take care when using &%fakedefer%& because it causes the
.vitem &*control&~=&~fakereject/*&<&'message'&>
.cindex "fake rejection"
.cindex "rejection, fake"
+.cindex fakereject
This control is permitted only for the MAIL, RCPT, and DATA ACLs, in other
words, only when an SMTP message is being received. If Exim accepts the
message, instead the final 250 response, a 550 rejection message is sent.
.cindex "multiline responses, suppressing"
This control is permitted for any ACL except the one for non-SMTP messages.
It seems that there are broken clients in use that cannot handle multiline
-SMTP responses, despite the fact that RFC 821 defined them over 20 years ago.
+SMTP responses, despite the fact that
+&url(https://www.rfc-editor.org/rfc/rfc821,RFC 821)
+defined them over 20 years ago.
If this control is set, multiline SMTP responses from ACL rejections are
suppressed. One way of doing this would have been to put out these responses as
-one long line. However, RFC 2821 specifies a maximum of 512 bytes per response
+one long line. However,
+&url(https://www.rfc-editor.org/rfc/rfc2821,RFC 2821)
+specifies a maximum of 512 bytes per response
(&"use multiline responses for more"& it says &-- ha!), and some of the
responses might get close to that. So this facility, which is after all only a
sop to broken clients, is implemented by doing two very easy things:
This control enables conversion of UTF-8 in message envelope addresses
to a-label form.
For details see section &<<SECTi18nMTA>>&.
+
+.vitem &*control&~=&~wellknown*&
+This control sets up a response data file for a WELLKNOWN SMTP command.
+It may only be used in an ACL servicing that command.
+For details see section &<<SECTWELLKNOWNACL>>&.
.endlist vlist
DATA, MIME or DKIM ACLs for a message delivered by cutthrough routing.
More than one header can be removed at the same time by using a colon separated
-list of header names. The header matching is case insensitive. Wildcards are
-not permitted, nor is list expansion performed, so you cannot use hostlists to
+list of header specifiers.
+If a specifier does not start with a circumflex (^)
+then it is treated as a header name.
+The header name matching is case insensitive.
+If it does, then it is treated as a (front-anchored)
+regular expression applied to the whole header.
+
+&*Note*&: The colon terminating a header name will need to be doubled
+if used in an RE, and there can legitimately be whitepace before it.
+
+Example:
+.code
+remove_header = \N^(?i)Authentication-Results\s*::\s*example.org;\N
+.endd
+
+List expansion is not performed, so you cannot use hostlists to
create a list of headers, however both connection and message variable expansion
are performed (&%$acl_c_*%& and &%$acl_m_*%&), illustrated in this example:
.code
warn message = Remove internal headers
remove_header = $acl_c_ihdrs
.endd
-Header names for removal are accumulated during the MAIL, RCPT, and predata ACLs.
+Header specifiers for removal are accumulated during the MAIL, RCPT, and predata ACLs.
Matching header lines are removed from the message before processing the DATA and MIME ACLs.
If multiple header lines match, all are removed.
There is no harm in attempting to remove the same header twice nor in removing
-a non-existent header. Further header lines to be removed may be accumulated
-during the DATA and MIME ACLs, after which they are removed from the message,
-if present. In the case of non-SMTP messages, headers to be removed are
-accumulated during the non-SMTP ACLs, and are removed from the message after
+a non-existent header. Further header specifiers for removal may be accumulated
+during the DATA and MIME ACLs, after which matching headers are removed
+if present. In the case of non-SMTP messages, remove specifiers are
+accumulated during the non-SMTP ACLs, and are acted on after
all the ACLs have run. If a message is rejected after DATA or by the non-SMTP
ACL, there really is no effect because there is no logging of what headers
would have been removed.
circumstances. For example, different ACLs can be used to handle RCPT commands
for different local users or different local domains.
+.new
+.vitem &*atrn_domains&~=&~*&<&'domain&~list'&>
+.cindex ATRN "checking for queued messages"
+This condition is only usable in the ATRN ACL.
+It returns true if there are any messages queued for any of the domains given
+in the list.
+The list supplied must not be tainted
+.cindex "tainted data" "de-tainting"
+and should contain only domains relevant for the authenticated user
+(to avoid leaking information about other users).
+.wen
+
.vitem &*authenticated&~=&~*&<&'string&~list'&>
.cindex "&%authenticated%& ACL condition"
.cindex "authentication" "ACL checking"
.cindex "callout" "full postmaster check"
This operates like the &%postmaster%& option (see below), but if the check for
&'postmaster@domain'& fails, it tries just &'postmaster'&, without a domain, in
-accordance with the specification in RFC 2821. The RFC states that the
-unqualified address &'postmaster'& should be accepted.
+accordance with the specification in
+&url(https://www.rfc-editor.org/rfc/rfc2821,RFC 2821).
+The RFC states that the unqualified address &'postmaster'& should be accepted.
.vitem &*mailfrom&~=&~*&<&'email&~address'&>
filename, and the default path is then used.
.endlist
The &%decode%& condition normally succeeds. It is only false for syntax
-errors or unusual circumstances such as memory shortages. You can easily decode
-a file with its original, proposed filename using
-.code
-decode = $mime_filename
-.endd
-However, you should keep in mind that &$mime_filename$& might contain
-anything. If you place files outside of the default path, they are not
+errors or unusual circumstances such as memory shortages.
+The variable &$mime_filename$& will have the suggested name for the file.
+Note however that this might contain anything, and is very difficult
+to safely use as all or even part of the filename.
+If you place files outside of the default path, they are not
automatically unlinked.
For RFC822 attachments (these are messages attached to messages, with a
This is perhaps the most important of the MIME variables. It contains a
proposed filename for an attachment, if one was found in either the
&'Content-Type:'& or &'Content-Disposition:'& headers. The filename will be
-RFC2047
-or RFC2231
+&url(https://www.rfc-editor.org/rfc/rfc2047,RFC 2047) or
+&url(https://www.rfc-editor.org/rfc/rfc2231,RFC 2231)
decoded, but no additional sanity checks are done.
If no filename was
found, this variable contains the empty string.
(the -D file). The file is open for reading and writing, but updating it is not
recommended. &*Warning*&: You must &'not'& close this file descriptor.
-The descriptor is positioned at character 19 of the file, which is the first
-character of the body itself, because the first 19 characters are the message
-id followed by &`-D`& and a newline. If you rewind the file, you should use the
+The descriptor is positioned at character 26 of the file, which is the first
+character of the body itself, because the first 26 characters (19 characters
+before Exim 4.97) are the message id followed by &`-D`& and a newline.
+If you rewind the file, you should use the
macro SPOOL_DATA_START_OFFSET to reset to the start of the data, just in
case this changes in some future version.
.next
.vitem &*void&~debug_printf(char&~*,&~...)*&
-This is Exim's debugging function, with arguments as for &'(printf()'&. The
+This is Exim's debugging function, with arguments as for &'printf()'&. The
output is written to the standard error stream. If no debugging is selected,
calls to &'debug_printf()'& have no effect. Normally, you should make calls
conditional on the &`local_scan`& debug selector by coding like this:
.vlist
.vitem "&*uschar&~rfc2047_decode(uschar&~*string,&~BOOL&~lencheck,&&&
&~uschar&~*target,&~int&~zeroval,&~int&~*lenptr, &~&~uschar&~**error)*&"
-This function decodes strings that are encoded according to RFC 2047. Typically
+This function decodes strings that are encoded according to
+&url(https://www.rfc-editor.org/rfc/rfc2047,RFC 2047). Typically
these are the contents of header lines. First, each &"encoded word"& is decoded
from the Q or B encoding into a byte-string. Then, if provided with the name of
a charset encoding, and if the &[iconv()]& function is available, an attempt is
.endd
The argument for the &%headers add%& is a string that is expanded and then
added to the end of the message's headers. It is the responsibility of the
-filter maintainer to make sure it conforms to RFC 2822 syntax. Leading white
+filter maintainer to make sure it conforms to
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822) syntax. Leading white
space is ignored, and if the string is otherwise empty, or if the expansion is
forced to fail, the command has no effect.
.cindex "line endings"
.cindex "carriage return"
.cindex "linefeed"
-RFC 2821 specifies that CRLF (two characters: carriage-return, followed by
+&url(https://www.rfc-editor.org/rfc/rfc2821,RFC 2821)
+specifies that CRLF (two characters: carriage-return, followed by
linefeed) is the line ending for messages transmitted over the Internet using
SMTP over TCP/IP. However, within individual operating systems, different
conventions are used. For example, Unix-like systems use just LF, but others
follows:
.ilist
-LF not preceded by CR is treated as a line ending.
-.next
CR is treated as a line ending; if it is immediately followed by LF, the LF
is ignored.
.next
.next
If the first header line received in a message ends with CRLF, a subsequent
bare LF in a header line is treated in the same way as a bare CR in a header
-line.
+line and a bare LF in a body line is replaced with a space.
+.next
+If the first header line received in a message does not end with CRLF, a subsequent
+LF not preceded by CR is treated as a line ending.
.endlist
From a.oakley@berlin.mus Fri Jan 5 12:35 GMT 1996
From f.butler@berlin.mus Fri, 7 Jan 97 14:00:00 GMT
.endd
-This line precedes the RFC 2822 header lines. For compatibility with Sendmail,
+This line precedes the
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+header lines. For compatibility with Sendmail,
Exim recognizes such lines at the start of messages that are submitted to it
via the command line (that is, on the standard input). It does not recognize
such lines in incoming SMTP messages, unless the sending host matches
When the caller of Exim for a non-SMTP message that contains a &"From"& line is
a trusted user, the message's sender address is constructed by expanding the
contents of &%uucp_sender_address%&, whose default value is &"$1"&. This is
-then parsed as an RFC 2822 address. If there is no domain, the local part is
+then parsed as an
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+address. If there is no domain, the local part is
qualified with &%qualify_domain%& unless it is the empty string. However, if
the command line &%-f%& option is used, it overrides the &"From"& line.
.section "Header lines"
.subsection "Resent- header lines" SECID220
.chindex Resent-
-RFC 2822 makes provision for sets of header lines starting with the string
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+makes provision for sets of header lines starting with the string
&`Resent-`& to be added to a message when it is resent by the original
recipient to somebody else. These headers are &'Resent-Date:'&,
&'Resent-From:'&, &'Resent-Sender:'&, &'Resent-To:'&, &'Resent-Cc:'&,
.subsection Delivery-date: SECID224
.cindex "&'Delivery-date:'& header line"
.oindex "&%delivery_date_remove%&"
-&'Delivery-date:'& header lines are not part of the standard RFC 2822 header
-set. Exim can be configured to add them to the final delivery of messages. (See
+&'Delivery-date:'& header lines are not part of the standard
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+header set.
+Exim can be configured to add them to the final delivery of messages. (See
the generic &%delivery_date_add%& transport option.) They should not be present
in messages in transit. If the &%delivery_date_remove%& configuration option is
set (the default), Exim removes &'Delivery-date:'& header lines from incoming
.subsection Envelope-to: SECID225
.chindex Envelope-to:
.oindex "&%envelope_to_remove%&"
-&'Envelope-to:'& header lines are not part of the standard RFC 2822 header set.
+&'Envelope-to:'& header lines are not part of the standard
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822) header set.
Exim can be configured to add them to the final delivery of messages. (See the
generic &%envelope_to_add%& transport option.) They should not be present in
messages in transit. If the &%envelope_to_remove%& configuration option is set
.chindex References:
Messages created by the &(autoreply)& transport include a &'References:'&
header line. This is constructed according to the rules that are described in
-section 3.64 of RFC 2822 (which states that replies should contain such a
-header line), and section 3.14 of RFC 3834 (which states that automatic
+section 3.64 of
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+(which states that replies should contain such a header line),
+and section 3.14 of &url(https://datatracker.ietf.org/doc/html/rfc3834,RFC 3834)
+(which states that automatic
responses are not different in this respect). However, because some mail
processing software does not cope well with very long header lines, no more
than 12 message IDs are copied from the &'References:'& header line in the
expansions all occur before the message is actually transported.
For both routers and transports, the argument of a &%headers_add%&
-option must be in the form of one or more RFC 2822 header lines, separated by
-newlines (coded as &"\n"&). For example:
+option must be in the form of one or more
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+header lines, separated by newlines (coded as &"\n"&). For example:
.code
headers_add = X-added-header: added by $primary_hostname\n\
X-added-second: another added header line
there is no password file entry.
.cindex "RFC 2047"
-In all cases, the user name is made to conform to RFC 2822 by quoting all or
+In all cases, the user name is made to conform to
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+by quoting all or
parts of it if necessary. In addition, if it contains any non-printing
-characters, it is encoded as described in RFC 2047, which defines a way of
+characters, it is encoded as described in
+&url(https://www.rfc-editor.org/rfc/rfc2047,RFC 2047), which defines a way of
including non-ASCII characters in header lines. The value of the
&%headers_charset%& option specifies the name of the encoding that is used (the
characters are assumed to be in this encoding). The setting of
.section "Case of local parts" "SECID230"
.cindex "case of local parts"
.cindex "local part" "case of"
-RFC 2822 states that the case of letters in the local parts of addresses cannot
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+states that the case of letters in the local parts of addresses cannot
be assumed to be non-significant. Exim preserves the case of local parts of
addresses, but by default it uses a lower-cased form when it is routing,
because on most Unix systems, usernames are in lower case and case-insensitive
.section "Dots in local parts" "SECID231"
.cindex "dot" "in local part"
.cindex "local part" "dots in"
-RFC 2822 forbids empty components in local parts. That is, an unquoted local
+&url(https://www.rfc-editor.org/rfc/rfc2822,RFC 2822)
+forbids empty components in local parts. That is, an unquoted local
part may not begin or end with a dot, nor have two consecutive dots in the
middle. However, it seems that many MTAs do not enforce this, so Exim permits
empty components for compatibility.
suppressed.
If the remote server advertises support for PIPELINING, Exim uses the
-pipelining extension to SMTP (RFC 2197) to reduce the number of TCP/IP packets
-required for the transaction.
+pipelining extension to SMTP
+(&url(https://datatracker.ietf.org/doc/html/rfc2197,RFC 2197))
+to reduce the number of TCP/IP packets required for the transaction.
If the remote server advertises support for the STARTTLS command, and Exim
was built to support TLS encryption, it tries to start a TLS session unless the
.cindex "SMTP" "batching over TCP/IP"
When a message is successfully delivered over a TCP/IP SMTP connection, Exim
looks in the hints database for the transport to see if there are any queued
-messages waiting for the host to which it is connected. If it finds one, it
-creates a new Exim process using the &%-MC%& option (which can only be used by
-a process running as root or the Exim user) and passes the TCP/IP socket to it
-so that it can deliver another message using the same socket. The new process
-does only those deliveries that are routed to the connected host, and may in
-turn pass the socket on to a third process, and so on.
+messages waiting for the host to which it is connected.
+If it finds one, it arranges to attempt that message on the same connection.
The &%connection_max_messages%& option of the &(smtp)& transport can be used to
limit the number of messages sent down a single TCP/IP connection.
.subsection "The ETRN command" SECTETRN
.cindex "ETRN" "processing"
.cindex "ESMTP extensions" ETRN
-RFC 1985 describes an ESMTP command called ETRN that is designed to
+Most modern installations never need to use this.
+It is used for managing messages queued for an intermittently-connecting
+destination (eg. one using a dialup connection).
+
+.oindex "&%acl_smtp_etrn%&"
+The command is only available if permitted by an ACL
+specfied by the main-section &%acl_smtp_etrn%& option.
+
+&url(https://www.rfc-editor.org/rfc/rfc1985,RFC 1985)
+describes an ESMTP command called ETRN that is designed to
overcome the security problems of the TURN command (which has fallen into
disuse). When Exim receives an ETRN command on a TCP/IP connection, it runs
the ACL specified by &%acl_smtp_etrn%& in order to decide whether the command
for it to change them before running the command.
+.new
+.subsection "The ATRN command" SECTATRN
+.cindex ATRN processing
+.cindex "ESMTP extensions" ATRN
+A second method for intermittently-connecting destinations
+is specified by
+&url(https://www.rfc-editor.org/rfc/rfc2645.html,RFC 2645).
+
+This describes an ESMTP command called ATRN which requests
+a swap in server/client roles of the communicating endpoints, and delivery
+of queued messages.
+Note that this supports customers having IP addresses that
+change frequently.
+
+Exim supports the &"provider"& side of ATRN, using the terms
+of that specification:
+initially as an SMTP server, then transferring to an SMTP client
+role if an ATRN command is accepted.
+
+.oindex "&%acl_smtp_atrn%&"
+The command is only available if permitted by an ACL
+specfied by the main-section &%acl_smtp_atrn%& option.
+Per the standard, this should only be for a specific
+provider port number (386, named "odmr");
+Exim should be configured to listen on that port
+(in addition to other duties) via &%daemon_smtp_ports%&
+or equivalent commandline options, and restrict the
+advertising of the facility to the port:
+.code
+acl_smtp_atrn = ${if = {$received_port}{386} {check_atrn}{}}
+.endd
+
+A recieved ATRN command will be rejected unless
+authentication has previously been done on the connection.
+
+Any arguments supplied with an ATRN command are (per standard)
+a comma-separated list of requested domains,
+and will be available in the &$smtp_command_argument$&
+variable.
+
+The ACL configured may return &"deny"& for any policy reaons
+(for example, the authenticated user is not permitted the facility).
+Otherwise it should use the ACL &"atrn_domains"& condition,
+which returns true if there are queued messages for any of
+the given list of domains.
+If that condition fails the ACL should return &"defer"&
+with a "453 You have no mail" response;
+else it should return &"accept"&.
+
+For example (with default domain handling, and one possible de-taint method) :
+.code
+check_atrn:
+ warn set acl_m0 = clientdom.net
+ deny condition = ${if def:smtp_command_argument}
+ set acl_m0 = ${map \
+ {<, $smtp_command_argument} \
+ {${if inlist{$item}{clientdom.net:cl2dom.net} {$value}}} \
+ }
+ condition = ${if !def:acl_m0}
+ defer !atrn_domains = <, $acl_m0
+ message = 453 You have no mail
+ accept
+.endd
+
+Acceptance by the ACL will result in a queue-run for messages
+having addresses with the given domains.
+A suitable router and transport must be configured for the deliveries.
+
+To access a named queue
+.cindex queue named
+the ACL should use a "queue =" modifier before the "atrn_domains"
+condition.
+If the ACL does not accept, re-set the queue to an empty value
+so as to not disrupt any later SMTP operations on the connection.
+
+Use of the &"atrn_domains"& condition additionally sets up
+the &$atrn_host$& variable, which can be used by a manualroute
+router. Being otherwise empty, this router will decline in
+other situations so can be safely placed in a general router chain.
+
+For example:
+.code
+begin routers
+odmr_client:
+ driver = manualroute
+ route_data = <;$atrn_host
+ transport = client_smtp
+
+begin transports
+client_smtp:
+ driver = smtp
+.endd
+
+Although not discssed in the specification document,
+Exim supports use of ATRN within a STARTTLS-
+or TLS-on-connect- encrypted connection
+(which is wise if a plaintext authentication mechanism is used).
+In such cases the TLS connection will remain open across the
+role-swap, and be used for the sending of queued messages.
+
+Note that the RFC requires that the CRAM-MD5 authentication
+method be supported.
+Exim does not enforce this, but leaves it up to the configuration;
+see chapter &<<CHID9>>&.
+
+.wen
+
+
.section "Incoming local SMTP" "SECID238"
.cindex "SMTP" "local incoming"
-.section "Outgoing batched SMTP" "SECTbatchSMTP"
+.section "Batched SMTP" "SECTgenbatchSMTP"
+.subsection "Outgoing batched SMTP" "SECTbatchSMTP"
.cindex "SMTP" "batched outgoing"
.cindex "batched SMTP output"
Both the &(appendfile)& and &(pipe)& transports can be used for handling
-.section "Incoming batched SMTP" "SECTincomingbatchedSMTP"
+.subsection "Incoming batched SMTP" "SECTincomingbatchedSMTP"
.cindex "SMTP" "batched incoming"
.cindex "batched SMTP input"
The &%-bS%& command line option causes Exim to accept one or more messages by
870 data characters. (This allows for a total syslog line length of 1024, when
additions such as timestamps are added.) If you are running a syslog
replacement that can handle lines longer than the 1024 characters allowed by
-RFC 3164, you should set
+&url(https://www.rfc-editor.org/rfc/rfc3164,RFC 3164), you should set
.code
SYSLOG_LONG_LINES=yes
.endd
.display
&`A `& authenticator name (and optional id and sender)
&`C `& SMTP confirmation on delivery
+&`Ci `& connection identifier
&` `& command list for &"no mail in SMTP session"&
&`CV `& certificate verification status
&`D `& duration of &"no mail in SMTP session"&
.section "Reducing or increasing what is logged" "SECTlogselector"
.cindex "log" "selectors"
By setting the &%log_selector%& global option, you can disable some of Exim's
-default logging, or you can request additional logging. The value of
+default logging to the main log, or you can request additional logging. The value of
&%log_selector%& is made up of names preceded by plus or minus characters. For
example:
.code
.irow &`address_rewrite`& "address rewriting"
.irow &`all_parents`& "all parents in => lines"
.irow &`arguments`& "command line arguments"
+.irow &`connection_id`& "connection identifier"
.irow &`connection_reject`& * "connection rejections"
.irow &`delay_delivery`& * "immediate delivery delayed"
.irow &`deliver_time`& "time taken to attempt delivery"
.irow &`delivery_size`& "add &`S=`&&'nnn'& to => lines"
.irow &`dkim`& * "DKIM verified domain on <= lines"
-.irow &`dkim_verbose`& "separate full DKIM verification result line, per signature"
+.irow &`dkim_verbose`& "separate full DKIM verification result line, per signature; DKIM signing"
.irow &`dnslist_defer`& * "defers of DNS list (aka RBL) lookups"
.irow &`dnssec`& "DNSSEC secured lookups"
.irow &`etrn`& * "ETRN commands"
.irow &`host_lookup_failed`& * "as it says"
.irow &`ident_timeout`& "timeout for ident connection"
-.irow &`incoming_interface`& "local interface on <= and => lines"
+.irow &`incoming_interface`& "local interface & port on <= and => lines"
.irow &`incoming_port`& "remote port on <= lines"
.irow &`lost_incoming_connection`& * "as it says (includes timeouts)"
.irow &`millisec`& "millisecond timestamps and RT,QT,DT,D times"
.irow &`tls_peerdn`& "TLS peer DN on <= and => lines"
.irow &`tls_resumption`& "append * to cipher field"
.irow &`tls_sni`& "TLS SNI on <= lines"
-.irow &`unknown_in_list`& "DNS lookup failed in list match"
+.irow &`unknown_in_list`& "lookup failed in list match"
.irow &`all`& "&*all of the above*&"
.endtable
See also the &%slow_lookup_log%& main configuration option,
only way to log such cases is to interpose a script such as &_util/logargs.sh_&
between the caller and Exim.
.next
-.cindex "log" "connection rejections"
+.cindex log "connection identifier"
+.cindex connection "identifier logging"
+&%connection_id%&: An identifier for the accepted connection is added to
+connection start and end lines and to message accept lines.
+The identifier is tagged by Ci=.
+The value is PID-based, so will reset on reboot and will wrap.
+.next
+.cindex log "connection rejections"
+.cindex connection "rejection logging"
&%connection_reject%&: A log entry is written whenever an incoming SMTP
connection is rejected, for whatever reason.
.next
-.cindex "log" "delayed delivery"
+.cindex log "delayed delivery"
.cindex "delayed delivery, logging"
&%delay_delivery%&: A log entry is written whenever a delivery process is not
started for an incoming message because the load is too high or too many
.cindex log "DKIM verification"
.cindex DKIM "verification logging"
&%dkim_verbose%&: A log entry is written for each attempted DKIM verification.
+Also, on message delivery lines signing information (domain and selector)
+is added, tagged with DKIM=.
.next
.cindex "log" "dnslist defer"
.cindex "DNS list" "logging defer"
in square brackets, and separated from it by a colon. This is implemented by
changing the value that is put in the &$sender_fullhost$& and
&$sender_rcvhost$& variables. Recording the remote port number has become more
-important with the widening use of NAT (see RFC 2505).
+important with the widening use of NAT
+(see &url(https://www.rfc-editor.org/rfc/rfc2505,RFC 2505)).
.next
.cindex "log" "dropped connection"
&%lost_incoming_connection%&: A log line is written when an incoming SMTP
.next
.cindex "log" "DNS failure in list"
&%unknown_in_list%&: This setting causes a log entry to be written when the
-result of a list match is failure because a DNS lookup failed.
+result of a list match is failure because a DNS lookup failed, or because
+a bad IP address was in the list.
.endlist
.irow &<<SECTtidydb>>& &'exim_tidydb'& "clean up a hints database"
.irow &<<SECTfixdb>>& &'exim_fixdb'& "patch a hints database"
.irow &<<SECTmailboxmaint>>& &'exim_lock'& "lock a mailbox file"
+.irow &<<SECTexim_msgdate>>& &'exim_msgdate'& "Message Ids for humans (exim_msgdate)"
.endtable
Another utility that might be of use to sites with many MTAs is Tom Kistner's
The &'misc'& database is used for
.ilist
-Serializing ETRN runs (when &%smtp_etrn_serialize%& is set)
-.next
Serializing delivery to a specific host (when &%serialize_hosts%& is set in an
&(smtp)& transport)
.next
Limiting the concurrency of specific transports (when &%max_parallel%& is set
in a transport)
+.next
+Recording EHLO-time facilities advertised by hosts
+.next
+Serializing ETRN runs (when &%smtp_etrn_serialize%& is set)
.endlist
-.section "exim_dumpdb" "SECTdumpdb"
+.subsection "exim_dumpdb" "SECTdumpdb"
.cindex "&'exim_dumpdb'&"
The entire contents of a database are written to the standard output by the
&'exim_dumpdb'& program,
-.section "exim_tidydb" "SECTtidydb"
+.subsection "exim_tidydb" "SECTtidydb"
.cindex "&'exim_tidydb'&"
The &'exim_tidydb'& utility program is used to tidy up the contents of a hints
database. If run with no options, it removes all records that are more than 30
-.section "exim_fixdb" "SECTfixdb"
+.subsection "exim_fixdb" "SECTfixdb"
.cindex "&'exim_fixdb'&"
The &'exim_fixdb'& program is a utility for interactively modifying databases.
Its main use is for testing Exim, but it might also be occasionally useful for
.endd
Note that if a command is supplied, it must be entirely contained within the
second argument &-- hence the quotes.
-.ecindex IIDutils
+.section "Message Ids for humans (exim_msgdate)" "SECTexim_msgdate"
+.cindex "exim_msgdate"
+The &'exim_msgdate'& utility is written by Andrew Aitchison and included in the Exim distribution.
+This Perl script converts an Exim Mesage ID back into a human readable form.
+For details of &'exim_msgdate'&'s options, run &'exim_msgdate'& with the &%--help%& option.
+
+Section &<<SECTmessiden>>& (Message identification) describes Exim Mesage IDs.
+.ecindex IIDutils
. ////////////////////////////////////////////////////////////////////////////
. ////////////////////////////////////////////////////////////////////////////
.next
A queue runner process retains root privilege throughout its execution. Its
job is to fork a controlled sequence of delivery processes.
+
.next
-A delivery process retains root privilege throughout most of its execution,
-but any actual deliveries (that is, the transports themselves) are run in
-subprocesses which always change to a non-root uid and gid. For local
-deliveries this is typically the uid and gid of the owner of the mailbox; for
-remote deliveries, the Exim uid and gid are used. Once all the delivery
+A delivery process retains root privilege throughout most of its execution.,
+including while the recipient addresses in a message are being routed.
+
+.ilist
+However, if a user's filter file has to be processed,
+this is done in a subprocess that runs under the individual user's uid and
+gid. A system filter is run as root unless &%system_filter_user%& is set.
+.endlist
+
+Any actual deliveries (that is, the transports themselves) are run in
+subprocesses which always change to a non-root uid and gid.
+.ilist
+For local
+deliveries this is typically the uid and gid of the owner of the mailbox.
+.next
+For remote deliveries, the Exim uid and gid are used.
+.endlist
+
+Once all the delivery
subprocesses have been run, a delivery process changes to the Exim uid and gid
while doing post-delivery tidying up such as updating the retry database and
generating bounce and warning messages.
-While the recipient addresses in a message are being routed, the delivery
-process runs as root. However, if a user's filter file has to be processed,
-this is done in a subprocess that runs under the individual user's uid and
-gid. A system filter is run as root unless &%system_filter_user%& is set.
.next
A process that is testing addresses (the &%-bt%& option) runs as root so that
the routing is done in the same environment as a message delivery.
DKIM is a mechanism by which messages sent by some entity can be provably
linked to a domain which that entity controls. It permits reputation to
be tracked on a per-domain basis, rather than merely upon source IP address.
-DKIM is documented in RFC 6376.
+DKIM is documented in &url(https://www.rfc-editor.org/rfc/rfc6376,RFC 6376).
As DKIM relies on the message being unchanged in transit, messages handled
by a mailing-list (which traditionally adds to the message) will not match
.olist
Signing outgoing messages: This function is implemented in the SMTP transport.
It can co-exist with all other Exim features
-(including transport filters)
-except cutthrough delivery.
+(including transport filters) except cutthrough delivery.
+However, signing options may not depend on headers modified by
+routers, the transport or a transport filter.
.next
Verifying signatures in incoming messages: This is implemented by an additional
ACL (acl_smtp_dkim), which can be called several times per message, with
.cindex DKIM signing
For signing to be usable you must have published a DKIM record in DNS.
-Note that RFC 8301 (which does not cover EC keys) says:
+Note that &url(https://www.rfc-editor.org/rfc/rfc8301,RFC 8301)
+(which does not cover EC keys) says:
.code
rsa-sha1 MUST NOT be used for signing or verifying.
openssl genrsa -out dkim_rsa.private 2048
openssl rsa -in dkim_rsa.private -out /dev/stdout -pubout -outform PEM
.endd
-The result file from the first command should be retained, and
-this option set to use it.
+The result file from the first command should be retained,
+permissions set so that Exim can read it,
+and this option set to use it.
Take the base-64 lines from the output of the second command, concatenated,
for the DNS TXT record.
-See section 3.6 of RFC6376 for the record specification.
+See section 3.6 of &url(https://www.rfc-editor.org/rfc/rfc6376,RFC 6376)
+for the record specification.
Under GnuTLS:
.code
certtool --load-privkey=dkim_rsa.private --pubkey-info
.endd
-Note that RFC 8301 says:
+Note that &url(https://www.rfc-editor.org/rfc/rfc8301,RFC 8301) says:
.code
Signers MUST use RSA keys of at least 1024 bits for all keys.
Signers SHOULD use RSA keys of at least 2048 bits.
.endd
-EC keys for DKIM are defined by RFC 8463.
+EC keys for DKIM are defined by
+&url(https://www.rfc-editor.org/rfc/rfc8463,RFC 8463).
They are considerably smaller than RSA keys for equivalent protection.
As they are a recent development, users should consider dual-signing
(by setting a list of selectors, and an expansion for this option)
&`sha512`& &-- possibly more secure but less well supported
.endlist
-Note that RFC 8301 says:
+Note that &url(https://www.rfc-editor.org/rfc/rfc8301,RFC 8301) says:
.code
rsa-sha1 MUST NOT be used for signing or verifying.
.endd
.option dkim_sign_headers smtp string&!! "see below"
If set, this option must expand to a colon-separated
list of header names.
-Headers with these names, or the absence or such a header, will be included
+Headers with these names, or the absence of such a header, will be included
in the message signature.
-When unspecified, the header names listed in RFC4871 will be used,
+When unspecified, the header names listed in
+&url(https://www.rfc-editor.org/rfc/rfc4871,RFC 4871) will be used,
whether or not each header is present in the message.
The default list is available for the expansion in the macro
&"_DKIM_SIGN_HEADERS"&
.option dkim_timestamps smtp integer&!! unset
This option controls the inclusion of timestamp information in the signature.
If not set, no such information will be included.
-Otherwise, must be an unsigned number giving an offset in seconds from the current time
-for the expiry tag
-(eg. 1209600 for two weeks);
-both creation (t=) and expiry (x=) tags will be included.
+Otherwise, must be an unsigned number giving an offset in seconds from the
+current time for the expiry tag (e.g. 1209600 for two weeks); both creation
+(t=) and expiry (x=) tags will be included unless the offset is 0 (no expiry).
-RFC 6376 lists these tags as RECOMMENDED.
+&url(https://www.rfc-editor.org/rfc/rfc6376,RFC 6376)
+lists these tags as RECOMMENDED.
.subsection "Verifying DKIM signatures in incoming mail" SECDKIMVFY
Verification of DKIM signatures in SMTP incoming email is done for all
messages for which an ACL control &%dkim_disable_verify%& has not been set.
+
.cindex DKIM "selecting signature algorithms"
-Individual classes of signature algorithm can be ignored by changing
+Individual classes of DKIM signature algorithm can be ignored by changing
the main options &%dkim_verify_hashes%& or &%dkim_verify_keytypes%&.
The &%dkim_verify_minimal%& option can be set to cease verification
processing for a message once the first passing signature is found.
of this section can be ignored.
The results of verification are made available to the
-&%acl_smtp_dkim%& ACL, which can examine and modify them.
+&%acl_smtp_dkim%& ACL, which (for complex needs) can examine and modify them.
A missing ACL definition defaults to accept.
By default, the ACL is called once for each
syntactically(!) correct signature in the incoming message.
&%dkim_verify_signers%& (see above).
.vitem &%$dkim_verify_status%&
+So long as a DKIM ACL is defined
+(it need do no more than accept, which is the default),
+after all the DKIM ACL runs have completed, the value becomes a
+colon-separated list of the values after each run.
+The value is maintained for the MIME, PRDR and DATA ACLs.
+
Within the DKIM ACL,
a string describing the general status of the signature. One of
.ilist
set dkim_verify_reason = hash too weak or key too short
.endd
-So long as a DKIM ACL is defined (it need do no more than accept),
-after all the DKIM ACL runs have completed, the value becomes a
-colon-separated list of the values after each run.
-This is maintained for the mime, prdr and data ACLs.
-
.vitem &%$dkim_verify_reason%&
A string giving a little bit more detail when &%$dkim_verify_status%& is either
"fail" or "invalid". One of
The "_CRYPTO_SIGN_ED25519" macro will be defined if support is present
for EC keys.
-Note that RFC 8301 says:
+Note that &url(https://www.rfc-editor.org/rfc/rfc8301,RFC 8301) says:
.code
rsa-sha1 MUST NOT be used for signing or verifying.
.vitem &%$dkim_copiedheaders%&
A transcript of headers and their values which are included in the signature
(copied from the 'z=' tag of the signature).
-Note that RFC6376 requires that verification fail if the From: header is
+Note that &url(https://www.rfc-editor.org/rfc/rfc6376,RFC 6376)
+requires that verification fail if the From: header is
not included in the signature. Exim does not enforce this; sites wishing
strict enforcement should code the check explicitly.
Valid only once the key is loaded, which is at the time the header signature
is verified, which is after the body hash is.
-Note that RFC 8301 says:
+Note that &url(https://www.rfc-editor.org/rfc/rfc8301,RFC 8301) says:
.code
Verifiers MUST NOT consider signatures using RSA keys of
less than 1024 bits as valid signatures.
.vitem &%dkim_signers%&
ACL condition that checks a colon-separated list of domains or identities
for a match against the domain or identity that the ACL is currently verifying
-(reflected by &%$dkim_cur_signer%&). This is typically used to restrict an ACL
+(reflected by &%$dkim_cur_signer%&).
+This condition is only usable in a DKIM ACL.
+This is typically used to restrict an ACL
verb to a group of domains or identities. For example:
.code
.vitem &%dkim_status%&
ACL condition that checks a colon-separated list of possible DKIM verification
-results against the actual result of verification. This is typically used
+results against the actual result of verification,
+given by &$dkim_verify_status$& if that is non-empty or "none" if empty.
+This condition may be used in DKIM, MIME, PRDR and DATA ACLs.
+
+A basic verification might be:
+.code
+deny !dkim_status = pass:none:invalid
+.endd
+
+A more complex use could be
to restrict an ACL verb to a list of verification outcomes, for example:
.code
The possible status keywords are: 'none','invalid','fail' and 'pass'. Please
see the documentation of the &%$dkim_verify_status%& expansion variable above
for more information of what they mean.
+
+The condition is true if the status
+(or any of the list of status values)
+is any one of the supplied list.
.endlist
.cindex SPF verification
SPF is a mechanism whereby a domain may assert which IP addresses may transmit
-messages with its domain in the envelope from, documented by RFC 7208.
+messages with its domain in the envelope from, documented by
+&url(https://www.rfc-editor.org/rfc/rfc7208,RFC 7208).
For more information on SPF see &url(http://www.open-spf.org), a static copy of
the &url(http://openspf.org).
. --- 2019-10-28: still not https, open-spf.org is told to be a
SPF verification support is built into Exim if SUPPORT_SPF=yes is set in
&_Local/Makefile_&. The support uses the &_libspf2_& library
&url(https://www.libspf2.org/).
+.new
+.cindex "dynamic modules"
+The support can be built as a dynamic-load module if desired;
+see the comments in that Makefile.
+.wen
+
There is no Exim involvement in the transmission of messages;
publishing certain DNS records is all that is required.
.subsection "SRS (Sender Rewriting Scheme)" SECTSRS
.cindex SRS "sender rewriting scheme"
+.cindex VERP "variable envelope return path"
SRS can be used to modify sender addresses when forwarding so that
SPF verification does not object to them.
-It operates by encoding the original envelope sender in a new
+It can also be used to identify a received bounce message as
+likely (or not) having been trigged by a message from the
+local system, and for identifying dead addresses in mailing lists.
+It is one implementation of a VERP (Variable Envelope Return Path) method.
+
+SRS operates by encoding the original envelope sender in a new
sender local part and using a domain run by the forwarding site
as the new domain for the sender. Any DSN message should be returned
to this new sender at the forwarding site, which can extract the
If this value is empty the the expansion result will be empty.
The third argument should be the recipient domain of the message when
it arrived at this system.
+All arguments are expanded before use.
+
+The result of the expansion is the replacement envelope-from (return path)
+to be used.
.endlist
.cindex SRS decoding
To decode an address use this expansion condition:
.vlist
.vitem &*inbound_srs&~{*&<&'local&~part'&>&*}{*&<&'secret'&>&*}*&
-The first argument should be the recipient local prt as is was received.
+The first argument should be the recipient local part as it was received.
The second argument is the site secret.
+Both arguments are expanded before use.
If the messages is not for an SRS-encoded recipient the condition will
-return false. If it is, the condition will return true and the variable
+return false.
+If it is, the condition will return true and the variable
&$srs_recipient$& will be set to the decoded (original) value.
+
+If the second argument is empty then the condition returns true if
+the first argument is in valid SRS formet, else false.
+The variable &$srs_recipient$& is not set for this case.
.endlist
Example usage:
allow_fail
data = :fail: Invalid SRS recipient address
- #... further routers here
+ #... further routers here get inbound_srs-redirected recipients
+ # and any that were not SRS'd
# transport; should look like the non-forward outbound
# one, plus the max_rcpt and return_path options
remote_forwarded_smtp:
driver = smtp
- # modify the envelope from, for mails that we forward
+ # single-recipient so that $original_domain is valid
max_rcpt = 1
+ # modify the envelope from, for mails that we forward
return_path = ${srs_encode {SRS_SECRET} {$return_path} {$original_domain}}
.endd
DMARC combines feedback from SPF, DKIM, and header From: in order
to attempt to provide better indicators of the authenticity of an
email. This document does not explain the fundamentals; you
-should read and understand how it works by visiting the website at
-&url(http://www.dmarc.org/).
+should read and understand how it works by visiting the
+&url(http://www.dmarc.org/,DMARC website).
If Exim is built with DMARC support,
the libopendmarc library is used.
For building Exim yourself, obtain the library from
-&url(http://sourceforge.net/projects/opendmarc/)
+&url(http://sourceforge.net/projects/opendmarc/,sourceforge)
to obtain a copy, or find it in your favorite package
repository. You will need to attend to the local/Makefile feature
SUPPORT_DMARC and the associated LDFLAGS addition.
The policy declared in the DMARC record. Valid values
are "none", "reject" and "quarantine". It is blank when there
is any error, including no DMARC record.
+
+.new
+.vitem &$dmarc_alignment_spf$&
+.vindex &$dmarc_alignment_spf$&
+The result of the SPF alignment portion of the test status;
+"yes" or "no".
+
+.vitem &$dmarc_alignment_dkim$&
+.vindex &$dmarc_alignment_dkim$&
+The result of the DKIM alignment portion of the test status;
+"yes" or "no".
+.wen
.endlist
.subsection Logging SSECDMARCLOGGING
.cindex proxy SOCKS
.cindex SOCKS proxy
Exim has support for sending outbound SMTP via a proxy
-using a protocol called SOCKS5 (defined by RFC1928).
+using a protocol called SOCKS5 (defined by
+&url(https://www.rfc-editor.org/rfc/rfc1928,RFC 1928)).
The support can be optionally included by defining SUPPORT_SOCKS=yes in
Local/Makefile.
Use of a proxy is enabled by setting the &%socks_proxy%& option
on an smtp transport.
-The option value is expanded and should then be a list
+.new
+If unset (or empty after expansion) then proxying is not done.
+.wen
+Otherwise, expansion should result in a list
(colon-separated by default) of proxy specifiers.
Each proxy specifier is a list
(space-separated by default) where the initial element
is an IP address and any subsequent elements are options.
-Options are a string <name>=<value>.
+Each option is a string of form <name>=<value>.
The list of options is in the following table:
.itable none 0 0 2 10* left 90* left
.irow &'auth'& "authentication method"
.cindex authentication "to proxy"
.cindex proxy authentication
&%auth%&: Either &"none"& (default) or &"name"&.
-Using &"name"& selects username/password authentication per RFC 1929
+Using &"name"& selects username/password authentication per
+&url(https://www.rfc-editor.org/rfc/rfc1929,RFC 1929)
for access to the proxy.
Default is &"none"&.
.next
Exim has support for Internationalised mail names.
To include this it must be built with SUPPORT_I18N and the libidn library.
-Standards supported are RFCs 2060, 5890, 6530 and 6533.
+Standards supported are RFCs
+&url(https://www.rfc-editor.org/rfc/rfc2060.html,2060),
+&url(https://www.rfc-editor.org/rfc/rfc5890.html,5890),
+&url(https://www.rfc-editor.org/rfc/rfc6530.html,6530) and
+&url(https://www.rfc-editor.org/rfc/rfc6533.html,6533).
If Exim is built with SUPPORT_I18N_2008 (in addition to SUPPORT_I18N, not
instead of it) then IDNA2008 is supported; this adds an extra library
the "headers charset" command (in a filter file)
or &%headers_charset%& main configuration option (otherwise),
to the
-modified UTF-7 encoding specified by RFC 2060,
+modified UTF-7 encoding specified by
+&url(https://www.rfc-editor.org/rfc/rfc2060.html,RFC 2060),
with the following exception: All occurrences of <sep>
(which has to be a single character)
are replaced with periods ("."), and all periods and slashes that are not
The name is placed in the variable &$event_name$& and the event action
expansion must check this, as it will be called for every possible event type.
+.new
The current list of events is:
.itable all 0 0 4 25* left 10* center 15* center 50* left
.row auth:fail after both "per driver per authentication attempt"
.row dane:fail after transport "per connection"
+.row dns:fail after both "per lookup"
.row msg:complete after main "per message"
.row msg:defer after transport "per message per delivery try"
.row msg:delivery after transport "per recipient"
.row tls:fail:connect after main "per connection"
.row smtp:connect after transport "per connection"
.row smtp:ehlo after transport "per connection"
+.row smtp:fail:protocol after main "per connection"
+.row smtp:fail:syntax after main "per connection"
.endtable
+.wen
New event types may be added in future.
The event name is a colon-separated list, defining the type of
An additional variable, &$event_data$&, is filled with information varying
with the event type:
+.new
.itable all 0 0 2 20* left 80* left
.row auth:fail "smtp response"
.row dane:fail "failure reason"
+.row dns:fail "failure reason, key and lookup-type"
.row msg:defer "error string"
.row msg:delivery "smtp confirmation message"
.row msg:fail:internal "failure reason"
.row tls:fail:connect "error string"
.row smtp:connect "smtp banner"
.row smtp:ehlo "smtp ehlo response"
+.row smtp:fail:protocol "error string"
+.row smtp:fail:syntax "error string"
.endtable
+.wen
The :defer events populate one extra variable: &$event_defer_errno$&.
no other use is made of it.
For a tcp:connect event, if the connection is being made to a proxy
-then the address and port variables will be that of the proxy and not
-the target system.
+then the &$host_address$& and &$host_port$& variables
+will be that of the proxy and not the target system.
For tls:cert events, if GnuTLS is in use this will trigger only per
chain element received on the connection.
For OpenSSL it will trigger for every chain element including those
loaded locally.
+For dns:fail events from dnsdb lookups, a &"defer_never"& option does not
+affect the reporting of DNS_AGAIN.
+
. ////////////////////////////////////////////////////////////////////////////
. ////////////////////////////////////////////////////////////////////////////
git://git.exim.org / exim.git / blobdiff