* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2014 */
+/* Copyright (c) University of Cambridge 1995 - 2017 */
/* See the file NOTICE for conditions of use and distribution. */
/* Code for receiving a message and setting up spool files. */
#endif
#ifdef EXPERIMENTAL_DMARC
-#include "dmarc.h"
+# include "dmarc.h"
#endif /* EXPERIMENTAL_DMARC */
/*************************************************
static FILE *data_file = NULL;
static int data_fd = -1;
-static uschar spool_name[256];
+static uschar *spool_name = US"";
+enum CH_STATE {LF_SEEN, MID_LINE, CR_SEEN};
/*************************************************
changing the pointer variables.) */
int
-stdin_getc(void)
+stdin_getc(unsigned lim)
{
return getc(stdin);
}
{
uschar *qnewsender;
if (trusted_caller) return TRUE;
-if (newsender == NULL || untrusted_set_sender == NULL) return FALSE;
-qnewsender = (Ustrchr(newsender, '@') != NULL)?
- newsender : string_sprintf("%s@%s", newsender, qualify_domain_sender);
-return
- match_address_list(qnewsender, TRUE, TRUE, &untrusted_set_sender, NULL, -1,
- 0, NULL) == OK;
+if (!newsender || !untrusted_set_sender) return FALSE;
+qnewsender = Ustrchr(newsender, '@')
+ ? newsender : string_sprintf("%s@%s", newsender, qualify_domain_sender);
+return match_address_list_basic(qnewsender, CUSS &untrusted_set_sender, 0) == OK;
}
{
#ifdef HAVE_STATFS
struct STATVFS statbuf;
+struct stat dummy;
uschar *path;
uschar *name;
uschar buffer[1024];
else
{
int sep = ':'; /* Not variable - outside scripts use */
- uschar *p = log_file_path;
+ const uschar *p = log_file_path;
name = US"log";
/* An empty log_file_path means "use the default". This is the same as an
empty item in a list. */
if (*p == 0) p = US":";
- while ((path = string_nextinlist(&p, &sep, buffer, sizeof(buffer))) != NULL)
- {
- if (Ustrcmp(path, "syslog") != 0) break;
- }
+ while ((path = string_nextinlist(&p, &sep, buffer, sizeof(buffer))))
+ if (Ustrcmp(path, "syslog") != 0)
+ break;
if (path == NULL) /* No log files */
{
memset(&statbuf, 0, sizeof(statbuf));
if (STATVFS(CS path, &statbuf) != 0)
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "cannot accept message: failed to stat "
- "%s directory %s: %s", name, spool_directory, strerror(errno));
- smtp_closedown(US"spool or log directory problem");
- exim_exit(EXIT_FAILURE);
- }
+ if (stat(CS path, &dummy) == -1 && errno == ENOENT)
+ { /* Can happen on first run after installation */
+ *inodeptr = -1;
+ return -1;
+ }
+ else
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "cannot accept message: failed to stat "
+ "%s directory %s: %s", name, path, strerror(errno));
+ smtp_closedown(US"spool or log directory problem");
+ exim_exit(EXIT_FAILURE, NULL);
+ }
*inodeptr = (statbuf.F_FILES > 0)? statbuf.F_FAVAIL : -1;
return (int)(((double)statbuf.F_BAVAIL * (double)statbuf.F_FRSIZE)/1024.0);
+#else
/* Unable to find partition sizes in this environment. */
-#else
*inodeptr = -1;
return -1;
#endif
/* Exit from the program (non-BSMTP cases) */
-exim_exit(EXIT_FAILURE);
+exim_exit(EXIT_FAILURE, NULL);
}
/* reset optin string pointer for next recipient */
bmi_current_optin = NULL;
#endif
+recipients_list[recipients_count].orcpt = NULL;
+recipients_list[recipients_count].dsn_flags = 0;
recipients_list[recipients_count++].errors_to = NULL;
}
smtp_user_msg(uschar *code, uschar *user_msg)
{
int len = 3;
-smtp_message_code(&code, &len, &user_msg, NULL);
+smtp_message_code(&code, &len, &user_msg, NULL, TRUE);
smtp_respond(code, len, TRUE, user_msg);
}
#endif
{
register int last_ch = '\n';
- for (; (ch = (receive_getc)()) != EOF; last_ch = ch)
+ for (; (ch = (receive_getc)(GETC_BUFFER_UNLIMITED)) != EOF; last_ch = ch)
{
if (ch == 0) body_zerocount++;
if (last_ch == '\r' && ch != '\n')
ch_state = 1;
-while ((ch = (receive_getc)()) != EOF)
+while ((ch = (receive_getc)(GETC_BUFFER_UNLIMITED)) != EOF)
{
if (ch == 0) body_zerocount++;
switch (ch_state)
case 1: /* After written "\n" */
if (ch == '.') { ch_state = 3; continue; }
- if (ch != '\n') ch_state = 0; else linelength = -1;
+ if (ch == '\r') { ch_state = 2; continue; }
+ if (ch == '\n') { body_linecount++; linelength = -1; }
+ else ch_state = 0;
break;
case 2:
{
int ch_state = 0;
int ch;
-register int linelength = 0;
+int linelength = 0;
-while ((ch = (receive_getc)()) != EOF)
+while ((ch = (receive_getc)(GETC_BUFFER_UNLIMITED)) != EOF)
{
if (ch == 0) body_zerocount++;
switch (ch_state)
{
message_size++;
if (fout != NULL && fputc('\n', fout) == EOF) return END_WERROR;
- (void) cutthrough_put_nl();
+ cutthrough_data_put_nl();
if (ch != '\r') ch_state = 1; else continue;
}
break;
ch_state = 4;
continue;
}
- ch_state = 1; /* The dot itself is removed */
+ /* The dot was removed at state 3. For a doubled dot, here, reinstate
+ it to cutthrough. The current ch, dot or not, is passed both to cutthrough
+ and to file below. */
+ if (ch == '.')
+ {
+ uschar c= ch;
+ cutthrough_data_puts(&c, 1);
+ }
+ ch_state = 1;
break;
case 4: /* After [CR] LF . CR */
message_size++;
body_linecount++;
if (fout != NULL && fputc('\n', fout) == EOF) return END_WERROR;
- (void) cutthrough_put_nl();
+ cutthrough_data_put_nl();
if (ch == '\r')
{
ch_state = 2;
message_size++;
linelength++;
- if (fout != NULL)
+ if (fout)
{
if (fputc(ch, fout) == EOF) return END_WERROR;
if (message_size > thismessage_size_limit) return END_SIZE;
}
if(ch == '\n')
- (void) cutthrough_put_nl();
+ cutthrough_data_put_nl();
else
{
- uschar c= ch;
- (void) cutthrough_puts(&c, 1);
+ uschar c = ch;
+ cutthrough_data_puts(&c, 1);
}
}
+/* Variant of the above read_message_data_smtp() specialised for RFC 3030
+CHUNKING. Accept input lines separated by either CRLF or CR or LF and write
+LF-delimited spoolfile. Until we have wireformat spoolfiles, we need the
+body_linecount accounting for proper re-expansion for the wire, so use
+a cut-down version of the state-machine above; we don't need to do leading-dot
+detection and unstuffing.
+
+Arguments:
+ fout a FILE to which to write the message; NULL if skipping;
+ must be open for both writing and reading.
+
+Returns: One of the END_xxx values indicating why it stopped reading
+*/
+
+static int
+read_message_bdat_smtp(FILE *fout)
+{
+int linelength = 0, ch;
+enum CH_STATE ch_state = LF_SEEN;
+BOOL fix_nl = FALSE;
+
+for(;;)
+ {
+ switch ((ch = bdat_getc(GETC_BUFFER_UNLIMITED)))
+ {
+ case EOF: return END_EOF;
+ case ERR: return END_PROTOCOL;
+ case EOD:
+ /* Nothing to get from the sender anymore. We check the last
+ character written to the spool.
+
+ RFC 3030 states, that BDAT chunks are normal text, terminated by CRLF.
+ If we would be strict, we would refuse such broken messages.
+ But we are liberal, so we fix it. It would be easy just to append
+ the "\n" to the spool.
+
+ But there are some more things (line counting, message size calculation and such),
+ that would need to be duplicated here. So we simply do some ungetc
+ trickery.
+ */
+ if (fout)
+ {
+ if (fseek(fout, -1, SEEK_CUR) < 0) return END_PROTOCOL;
+ if (fgetc(fout) == '\n') return END_DOT;
+ }
+
+ if (linelength == -1) /* \r already seen (see below) */
+ {
+ DEBUG(D_receive) debug_printf("Add missing LF\n");
+ bdat_ungetc('\n');
+ continue;
+ }
+ DEBUG(D_receive) debug_printf("Add missing CRLF\n");
+ bdat_ungetc('\r'); /* not even \r was seen */
+ fix_nl = TRUE;
+
+ continue;
+ case '\0': body_zerocount++; break;
+ }
+ switch (ch_state)
+ {
+ case LF_SEEN: /* After LF or CRLF */
+ ch_state = MID_LINE;
+ /* fall through to handle as normal uschar. */
+
+ case MID_LINE: /* Mid-line state */
+ if (ch == '\n')
+ {
+ ch_state = LF_SEEN;
+ body_linecount++;
+ if (linelength > max_received_linelength)
+ max_received_linelength = linelength;
+ linelength = -1;
+ }
+ else if (ch == '\r')
+ {
+ ch_state = CR_SEEN;
+ if (fix_nl) bdat_ungetc('\n');
+ continue; /* don't write CR */
+ }
+ break;
+
+ case CR_SEEN: /* After (unwritten) CR */
+ body_linecount++;
+ if (linelength > max_received_linelength)
+ max_received_linelength = linelength;
+ linelength = -1;
+ if (ch == '\n')
+ ch_state = LF_SEEN;
+ else
+ {
+ message_size++;
+ if (fout && fputc('\n', fout) == EOF) return END_WERROR;
+ cutthrough_data_put_nl();
+ if (ch == '\r') continue; /* don't write CR */
+ ch_state = MID_LINE;
+ }
+ break;
+ }
+
+ /* Add the character to the spool file, unless skipping */
+
+ message_size++;
+ linelength++;
+ if (fout)
+ {
+ if (fputc(ch, fout) == EOF) return END_WERROR;
+ if (message_size > thismessage_size_limit) return END_SIZE;
+ }
+ if(ch == '\n')
+ cutthrough_data_put_nl();
+ else
+ {
+ uschar c = ch;
+ cutthrough_data_puts(&c, 1);
+ }
+ }
+/*NOTREACHED*/
+}
+
+static int
+read_message_bdat_smtp_wire(FILE *fout)
+{
+int ch;
+
+/* Remember that this message uses wireformat. */
+
+DEBUG(D_receive) debug_printf("CHUNKING: writing spoolfile in wire format\n");
+spool_file_wireformat = TRUE;
+
+for (;;)
+ {
+ if (chunking_data_left > 0)
+ {
+ unsigned len = MAX(chunking_data_left, thismessage_size_limit - message_size + 1);
+ uschar * buf = bdat_getbuf(&len);
+
+ message_size += len;
+ if (fout && fwrite(buf, len, 1, fout) != 1) return END_WERROR;
+ }
+ else switch (ch = bdat_getc(GETC_BUFFER_UNLIMITED))
+ {
+ case EOF: return END_EOF;
+ case EOD: return END_DOT;
+ case ERR: return END_PROTOCOL;
+
+ default:
+ message_size++;
+ /*XXX not done:
+ linelength
+ max_received_linelength
+ body_linecount
+ body_zerocount
+ */
+ if (fout && fputc(ch, fout) == EOF) return END_WERROR;
+ break;
+ }
+ if (message_size > thismessage_size_limit) return END_SIZE;
+ }
+/*NOTREACHED*/
+}
+
+
+
+
/*************************************************
* Swallow SMTP message *
*************************************************/
void
receive_swallow_smtp(void)
{
+/*XXX CHUNKING: not enough. read chunks until RSET? */
if (message_ended >= END_NOTENDED)
message_ended = read_message_data_smtp(NULL);
}
{
log_write(L_lost_incoming_connection | L_smtp_connection, LOG_MAIN,
"%s lost while reading message data%s", smtp_get_connection_info(), s);
+smtp_notquit_exit(US"connection-lost", NULL, NULL);
return US"421 Lost incoming connection";
}
error_block eblock;
eblock.next = NULL;
eblock.text1 = text1;
+ eblock.text2 = US"";
if (!moan_to_sender(errcode, &eblock, hptr, f, FALSE))
error_rc = EXIT_FAILURE;
}
-else fprintf(stderr, "exim: %s%s\n", text2, text1); /* Sic */
+else
+ fprintf(stderr, "exim: %s%s\n", text2, text1); /* Sic */
(void)fclose(f);
-exim_exit(error_rc);
+exim_exit(error_rc, US"");
}
{
case ACL_WHERE_DKIM:
case ACL_WHERE_MIME:
- case ACL_WHERE_DATA: if (cutthrough_fd >= 0 && (acl_removed_headers || acl_added_headers))
+ case ACL_WHERE_DATA:
+ if ( cutthrough.fd >= 0 && cutthrough.delivery
+ && (acl_removed_headers || acl_added_headers))
{
log_write(0, LOG_MAIN|LOG_PANIC, "Header modification in data ACLs"
- "will not take effect on cutthrough deliveries");
+ " will not take effect on cutthrough deliveries");
return;
}
}
-if (acl_removed_headers != NULL)
+if (acl_removed_headers)
{
- DEBUG(D_receive|D_acl) debug_printf(">>Headers removed by %s ACL:\n", acl_name);
+ DEBUG(D_receive|D_acl) debug_printf_indent(">>Headers removed by %s ACL:\n", acl_name);
- for (h = header_list; h != NULL; h = h->next)
+ for (h = header_list; h; h = h->next) if (h->type != htype_old)
{
- uschar *list;
- BOOL include_header;
-
- if (h->type == htype_old) continue;
-
- include_header = TRUE;
- list = acl_removed_headers;
-
+ const uschar * list = acl_removed_headers;
int sep = ':'; /* This is specified as a colon-separated list */
uschar *s;
uschar buffer[128];
- while ((s = string_nextinlist(&list, &sep, buffer, sizeof(buffer)))
- != NULL)
- {
- int len = Ustrlen(s);
- if (header_testname(h, s, len, FALSE))
+
+ while ((s = string_nextinlist(&list, &sep, buffer, sizeof(buffer))))
+ if (header_testname(h, s, Ustrlen(s), FALSE))
{
h->type = htype_old;
- DEBUG(D_receive|D_acl) debug_printf(" %s", h->text);
+ DEBUG(D_receive|D_acl) debug_printf_indent(" %s", h->text);
}
- }
}
acl_removed_headers = NULL;
- DEBUG(D_receive|D_acl) debug_printf(">>\n");
+ DEBUG(D_receive|D_acl) debug_printf_indent(">>\n");
}
-if (acl_added_headers == NULL) return;
-DEBUG(D_receive|D_acl) debug_printf(">>Headers added by %s ACL:\n", acl_name);
+if (!acl_added_headers) return;
+DEBUG(D_receive|D_acl) debug_printf_indent(">>Headers added by %s ACL:\n", acl_name);
-for (h = acl_added_headers; h != NULL; h = next)
+for (h = acl_added_headers; h; h = next)
{
next = h->next;
case htype_add_top:
h->next = header_list;
header_list = h;
- DEBUG(D_receive|D_acl) debug_printf(" (at top)");
+ DEBUG(D_receive|D_acl) debug_printf_indent(" (at top)");
break;
case htype_add_rec:
}
h->next = last_received->next;
last_received->next = h;
- DEBUG(D_receive|D_acl) debug_printf(" (after Received:)");
+ DEBUG(D_receive|D_acl) debug_printf_indent(" (after Received:)");
break;
case htype_add_rfc:
of all headers. Our current header must follow it. */
h->next = last_received->next;
last_received->next = h;
- DEBUG(D_receive|D_acl) debug_printf(" (before any non-Received: or Resent-*: header)");
+ DEBUG(D_receive|D_acl) debug_printf_indent(" (before any non-Received: or Resent-*: header)");
break;
default:
h->type = header_checkname(h, FALSE);
if (h->type >= 'a') h->type = htype_other;
- DEBUG(D_receive|D_acl) debug_printf(" %s", header_last->text);
+ DEBUG(D_receive|D_acl) debug_printf_indent(" %s", header_last->text);
}
acl_added_headers = NULL;
-DEBUG(D_receive|D_acl) debug_printf(">>\n");
+DEBUG(D_receive|D_acl) debug_printf_indent(">>\n");
}
Arguments:
s the dynamic string
- sizeptr points to the size variable
- ptrptr points to the pointer variable
Returns: the extended string
*/
-static uschar *
-add_host_info_for_log(uschar *s, int *sizeptr, int *ptrptr)
+static gstring *
+add_host_info_for_log(gstring * g)
{
-if (sender_fullhost != NULL)
+if (sender_fullhost)
{
- s = string_append(s, sizeptr, ptrptr, 2, US" H=", sender_fullhost);
- if ((log_extra_selector & LX_incoming_interface) != 0 &&
- interface_address != NULL)
+ if (LOGGING(dnssec) && sender_host_dnssec) /*XXX sender_helo_dnssec? */
+ g = string_catn(g, US" DS", 3);
+ g = string_append(g, 2, US" H=", sender_fullhost);
+ if (LOGGING(incoming_interface) && interface_address != NULL)
{
- uschar *ss = string_sprintf(" I=[%s]:%d", interface_address,
- interface_port);
- s = string_cat(s, sizeptr, ptrptr, ss, Ustrlen(ss));
+ g = string_cat(g,
+ string_sprintf(" I=[%s]:%d", interface_address, interface_port));
}
}
-if (sender_ident != NULL)
- s = string_append(s, sizeptr, ptrptr, 2, US" U=", sender_ident);
-if (received_protocol != NULL)
- s = string_append(s, sizeptr, ptrptr, 2, US" P=", received_protocol);
-return s;
+if (tcp_in_fastopen && !tcp_in_fastopen_logged)
+ {
+ g = string_catn(g, US" TFO", 4);
+ tcp_in_fastopen_logged = TRUE;
+ }
+if (sender_ident)
+ g = string_append(g, 2, US" U=", sender_ident);
+if (received_protocol)
+ g = string_append(g, 2, US" P=", received_protocol);
+return g;
}
header_line *my_headerlist;
uschar *user_msg, *log_msg;
int mime_part_count_buffer = -1;
+uschar * mbox_filename;
int rc = OK;
memset(CS rfc822_file_path,0,2048);
/* check if it is a MIME message */
-my_headerlist = header_list;
-while (my_headerlist != NULL)
- {
- /* skip deleted headers */
- if (my_headerlist->type == '*')
- {
- my_headerlist = my_headerlist->next;
- continue;
- }
- if (strncmpic(my_headerlist->text, US"Content-Type:", 13) == 0)
+
+for (my_headerlist = header_list; my_headerlist; my_headerlist = my_headerlist->next)
+ if ( my_headerlist->type != '*' /* skip deleted headers */
+ && strncmpic(my_headerlist->text, US"Content-Type:", 13) == 0
+ )
{
DEBUG(D_receive) debug_printf("Found Content-Type: header - executing acl_smtp_mime.\n");
goto DO_MIME_ACL;
}
- my_headerlist = my_headerlist->next;
- }
DEBUG(D_receive) debug_printf("No Content-Type: header - presumably not a MIME message.\n");
return TRUE;
DO_MIME_ACL:
+
/* make sure the eml mbox file is spooled up */
-mbox_file = spool_mbox(&mbox_size, NULL);
-if (mbox_file == NULL) {
- /* error while spooling */
+if (!(mbox_file = spool_mbox(&mbox_size, NULL, &mbox_filename)))
+ { /* error while spooling */
log_write(0, LOG_MAIN|LOG_PANIC,
"acl_smtp_mime: error while creating mbox spool file, message temporarily rejected.");
Uunlink(spool_name);
message_id[0] = 0; /* Indicate no message accepted */
*smtp_reply_ptr = US""; /* Indicate reply already sent */
return FALSE; /* Indicate skip to end of receive function */
-};
+ }
mime_is_rfc822 = 0;
/* check if we must check any message/rfc822 attachments */
if (rc == OK)
{
- uschar temp_path[1024];
- int n;
- struct dirent *entry;
- DIR *tempdir;
+ uschar * scandir;
+ struct dirent * entry;
+ DIR * tempdir;
- (void)string_format(temp_path, 1024, "%s/scan/%s", spool_directory,
- message_id);
+ scandir = string_copyn(mbox_filename, Ustrrchr(mbox_filename, '/') - mbox_filename);
- tempdir = opendir(CS temp_path);
- n = 0;
- do
+ tempdir = opendir(CS scandir);
+ for (;;)
{
- entry = readdir(tempdir);
- if (entry == NULL) break;
- if (strncmpic(US entry->d_name,US"__rfc822_",9) == 0)
+ if (!(entry = readdir(tempdir)))
+ break;
+ if (strncmpic(US entry->d_name, US"__rfc822_", 9) == 0)
{
- (void)string_format(rfc822_file_path, 2048,"%s/scan/%s/%s", spool_directory, message_id, entry->d_name);
- debug_printf("RFC822 attachment detected: running MIME ACL for '%s'\n", rfc822_file_path);
+ (void) string_format(rfc822_file_path, sizeof(rfc822_file_path),
+ "%s/%s", scandir, entry->d_name);
+ DEBUG(D_receive) debug_printf("RFC822 attachment detected: running MIME ACL for '%s'\n",
+ rfc822_file_path);
break;
}
- } while (1);
+ }
closedir(tempdir);
- if (entry != NULL)
+ if (entry)
{
- mbox_file = Ufopen(rfc822_file_path,"rb");
- if (mbox_file == NULL)
+ if ((mbox_file = Ufopen(rfc822_file_path, "rb")))
{
- log_write(0, LOG_PANIC,
- "acl_smtp_mime: can't open RFC822 spool file, skipping.");
- unlink(CS rfc822_file_path);
- goto END_MIME_ACL;
+ /* set RFC822 expansion variable */
+ mime_is_rfc822 = 1;
+ mime_part_count_buffer = mime_part_count;
+ goto MIME_ACL_CHECK;
}
- /* set RFC822 expansion variable */
- mime_is_rfc822 = 1;
- mime_part_count_buffer = mime_part_count;
- goto MIME_ACL_CHECK;
+ log_write(0, LOG_PANIC,
+ "acl_smtp_mime: can't open RFC822 spool file, skipping.");
+ unlink(CS rfc822_file_path);
}
}
#ifdef EXPERIMENTAL_DCC
dcc_ok = 0;
#endif
- if (smtp_input && smtp_handle_acl_fail(ACL_WHERE_MIME, rc, user_msg, log_msg) != 0) {
- *smtp_yield_ptr = FALSE; /* No more messsages after dropped connection */
+ if ( smtp_input
+ && smtp_handle_acl_fail(ACL_WHERE_MIME, rc, user_msg, log_msg) != 0)
+ {
+ *smtp_yield_ptr = FALSE; /* No more messages after dropped connection */
*smtp_reply_ptr = US""; /* Indicate reply already sent */
- }
+ }
message_id[0] = 0; /* Indicate no message accepted */
return FALSE; /* Cause skip to end of receive function */
}
received = expand_string(received_header_text);
received_for = NULL;
-if (received == NULL)
+if (!received)
{
if(spool_name[0] != 0)
Uunlink(spool_name); /* Lose the data file */
int error_rc = (error_handling == ERRORS_SENDER)?
errors_sender_rc : EXIT_FAILURE;
int header_size = 256;
-int start, end, domain, size, sptr;
+int start, end, domain;
int id_resolution;
int had_zero = 0;
int prevlines_length = 0;
uschar *frozen_by = NULL;
uschar *queued_by = NULL;
-uschar *errmsg, *s;
+uschar *errmsg;
+gstring * g;
struct stat statbuf;
/* Final message to give to SMTP caller, and messages from ACLs */
cutthrough delivery with the no-spool option. It shouldn't be possible
to set up the combination, but just in case kill any ongoing connection. */
if (extract_recip || !smtp_input)
- cancel_cutthrough_connection("not smtp input");
+ cancel_cutthrough_connection(TRUE, US"not smtp input");
/* Initialize the chain of headers by setting up a place-holder for Received:
header. Temporarily mark it as "old", i.e. not to be used. We keep header_last
message_id[0] = 0;
data_file = NULL;
data_fd = -1;
-spool_name[0] = 0;
+spool_name = US"";
message_size = 0;
warning_count = 0;
received_count = 1; /* For the one we will add */
max_received_linelength = 0;
#ifndef DISABLE_DKIM
-/* Call into DKIM to set up the context. */
-if (smtp_input && !smtp_batched_input && !dkim_disable_verify) dkim_exim_verify_init();
+/* Call into DKIM to set up the context. In CHUNKING mode
+we clear the dot-stuffing flag */
+if (smtp_input && !smtp_batched_input && !dkim_disable_verify)
+ dkim_exim_verify_init(chunking_state <= CHUNKING_OFFERED);
#endif
#ifdef EXPERIMENTAL_DMARC
/* For other uses of the received time we can operate with granularity of one
second, and for that we use the global variable received_time. This is for
-things like ultimate message timeouts. */
+things like ultimate message timeouts.XXX */
-received_time = message_id_tv.tv_sec;
+received_time = message_id_tv;
/* If SMTP input, set the special handler for timeouts. The alarm() calls
happen in the smtp_getc() function when it refills its buffer. */
for (;;)
{
- int ch = (receive_getc)();
+ int ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
/* If we hit EOF on a SMTP connection, it's an error, since incoming
SMTP must have a correct "." terminator. */
if (ptr == 0 && ch == '.' && (smtp_input || dot_ends))
{
- ch = (receive_getc)();
+ ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
if (ch == '\r')
{
- ch = (receive_getc)();
+ ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
if (ch != '\n')
{
receive_ungetc(ch);
if (ch == '\r')
{
- ch = (receive_getc)();
+ ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
if (ch == '\n')
{
if (first_line_ended_crlf == TRUE_UNSET) first_line_ended_crlf = TRUE;
if (ch != EOF)
{
- int nextch = (receive_getc)();
+ int nextch = (receive_getc)(GETC_BUFFER_UNLIMITED);
if (nextch == ' ' || nextch == '\t')
{
next->text[ptr++] = nextch;
}
}
+ /* Reject CHUNKING messages that do not CRLF their first header line */
+
+ if (!first_line_ended_crlf && chunking_state > CHUNKING_OFFERED)
+ {
+ log_write(L_size_reject, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
+ "Non-CRLF-terminated header, under CHUNKING: message abandoned",
+ sender_address,
+ sender_fullhost ? " H=" : "", sender_fullhost ? sender_fullhost : US"",
+ sender_ident ? " U=" : "", sender_ident ? sender_ident : US"");
+ smtp_printf("552 Message header not CRLF terminated\r\n", FALSE);
+ bdat_flush_data();
+ smtp_reply = US"";
+ goto TIDYUP; /* Skip to end of function */
+ }
+
/* The line has been handled. If we have hit EOF, break out of the loop,
indicating no pending data line. */
DEBUG(D_receive)
{
debug_printf(">>Headers received:\n");
- for (h = header_list->next; h != NULL; h = h->next)
+ for (h = header_list->next; h; h = h->next)
debug_printf("%s", h->text);
debug_printf("\n");
}
/* Scan the headers to identify them. Some are merely marked for later
processing; some are dealt with here. */
-for (h = header_list->next; h != NULL; h = h->next)
+for (h = header_list->next; h; h = h->next)
{
BOOL is_resent = strncmpic(h->text, US"resent-", 7) == 0;
if (is_resent) contains_resent_headers = TRUE;
/* Now scan the headers */
- for (h = header_list->next; h != NULL; h = h->next)
+ for (h = header_list->next; h; h = h->next)
{
if ((h->type == htype_to || h->type == htype_cc || h->type == htype_bcc) &&
(!contains_resent_headers || strncmpic(h->text, US"resent-", 7) == 0))
pp = recipient = store_get(ss - s + 1);
for (p = s; p < ss; p++) if (*p != '\n') *pp++ = *p;
*pp = 0;
+
+#ifdef SUPPORT_I18N
+ {
+ BOOL b = allow_utf8_domains;
+ allow_utf8_domains = TRUE;
+#endif
recipient = parse_extract_address(recipient, &errmess, &start, &end,
&domain, FALSE);
+#ifdef SUPPORT_I18N
+ if (string_is_utf8(recipient))
+ message_smtputf8 = TRUE;
+ else
+ allow_utf8_domains = b;
+ }
+#endif
+
/* Keep a list of all the bad addresses so we can send a single
error message at the end. However, an empty address is not an error;
just ignore it. This can come from an empty group list like
NOTE: If ever the format of message ids is changed, the regular expression for
checking that a string is in this format must be updated in a corresponding
way. It appears in the initializing code in exim.c. The macro MESSAGE_ID_LENGTH
-must also be changed to reflect the correct string length. Then, of course,
-other programs that rely on the message id format will need updating too. */
+must also be changed to reflect the correct string length. The queue-sort code
+needs to know the layout. Then, of course, other programs that rely on the
+message id format will need updating too. */
Ustrncpy(message_id, string_base62((long int)(message_id_tv.tv_sec)), 6);
message_id[6] = '-';
to be the least significant base-62 digit of the time of arrival. Otherwise
ensure that it is an empty string. */
-message_subdir[0] = split_spool_directory? message_id[5] : 0;
+message_subdir[0] = split_spool_directory ? message_id[5] : 0;
/* Now that we have the message-id, if there is no message-id: header, generate
one, but only for local (without suppress_local_fixups) or submission mode
rewriting. Must copy the count, because later ACLs and the local_scan()
function may mess with the real recipients. */
-if ((log_extra_selector & LX_received_recipients) != 0)
+if (LOGGING(received_recipients))
{
raw_recipients = store_get(recipients_count * sizeof(uschar *));
for (i = 0; i < recipients_count; i++)
documented as happening *after* recipient addresses are taken from the headers
by the -t command line option. An added Sender: gets rewritten here. */
-for (h = header_list->next; h != NULL; h = h->next)
+for (h = header_list->next; h; h = h->next)
{
header_line *newh = rewrite_header(h, NULL, NULL, global_rewrite_rules,
rewrite_existflags, TRUE);
- if (newh != NULL) h = newh;
+ if (newh) h = newh;
}
return message_ended == END_DOT;
}
-/* Cutthrough delivery:
- We have to create the Received header now rather than at the end of reception,
- so the timestamp behaviour is a change to the normal case.
- XXX Ensure this gets documented XXX.
- Having created it, send the headers to the destination.
+/*XXX CHUNKING: need to cancel cutthrough under BDAT, for now. In future,
+think more if it could be handled. Cannot do onward CHUNKING unless
+inbound is, but inbound chunking ought to be ok with outbound plain.
+Could we do onward CHUNKING given inbound CHUNKING?
*/
-if (cutthrough_fd >= 0)
+if (chunking_state > CHUNKING_OFFERED)
+ cancel_cutthrough_connection(FALSE, US"chunking active");
+
+/* Cutthrough delivery:
+We have to create the Received header now rather than at the end of reception,
+so the timestamp behaviour is a change to the normal case.
+Having created it, send the headers to the destination. */
+
+if (cutthrough.fd >= 0 && cutthrough.delivery)
{
if (received_count > received_headers_max)
{
- cancel_cutthrough_connection("too many headers");
+ cancel_cutthrough_connection(TRUE, US"too many headers");
if (smtp_input) receive_swallow_smtp(); /* Swallow incoming SMTP */
log_write(0, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
"Too many \"Received\" headers",
sender_address,
- (sender_fullhost == NULL)? "" : " H=",
- (sender_fullhost == NULL)? US"" : sender_fullhost,
- (sender_ident == NULL)? "" : " U=",
- (sender_ident == NULL)? US"" : sender_ident);
+ sender_fullhost ? "H=" : "", sender_fullhost ? sender_fullhost : US"",
+ sender_ident ? "U=" : "", sender_ident ? sender_ident : US"");
message_id[0] = 0; /* Indicate no message accepted */
smtp_reply = US"550 Too many \"Received\" headers - suspected mail loop";
goto TIDYUP; /* Skip to end of function */
/* Open a new spool file for the data portion of the message. We need
to access it both via a file descriptor and a stream. Try to make the
-directory if it isn't there. Note re use of sprintf: spool_directory
-is checked on input to be < 200 characters long. */
+directory if it isn't there. */
-sprintf(CS spool_name, "%s/input/%s/%s-D", spool_directory, message_subdir,
- message_id);
-data_fd = Uopen(spool_name, O_RDWR|O_CREAT|O_EXCL, SPOOL_MODE);
-if (data_fd < 0)
+spool_name = spool_fname(US"input", message_subdir, message_id, US"-D");
+DEBUG(D_receive) debug_printf("Data file name: %s\n", spool_name);
+
+if ((data_fd = Uopen(spool_name, O_RDWR|O_CREAT|O_EXCL, SPOOL_MODE)) < 0)
{
if (errno == ENOENT)
{
- uschar temp[16];
- sprintf(CS temp, "input/%s", message_subdir);
- if (message_subdir[0] == 0) temp[5] = 0;
- (void)directory_make(spool_directory, temp, INPUT_DIRECTORY_MODE, TRUE);
+ (void) directory_make(spool_directory,
+ spool_sname(US"input", message_subdir),
+ INPUT_DIRECTORY_MODE, TRUE);
data_fd = Uopen(spool_name, O_RDWR|O_CREAT|O_EXCL, SPOOL_MODE);
}
if (data_fd < 0)
{
if (smtp_input)
{
- message_ended = read_message_data_smtp(data_file);
+ message_ended = chunking_state <= CHUNKING_OFFERED
+ ? read_message_data_smtp(data_file)
+ : spool_wireformat
+ ? read_message_bdat_smtp_wire(data_file)
+ : read_message_bdat_smtp(data_file);
receive_linecount++; /* The terminating "." line */
}
else message_ended = read_message_data(data_file);
receive_linecount += body_linecount; /* For BSMTP errors mainly */
message_linecount += body_linecount;
- /* Handle premature termination of SMTP */
-
- if (smtp_input && message_ended == END_EOF)
+ switch (message_ended)
{
- Uunlink(spool_name); /* Lose data file when closed */
- cancel_cutthrough_connection("sender closed connection");
- message_id[0] = 0; /* Indicate no message accepted */
- smtp_reply = handle_lost_connection(US"");
- smtp_yield = FALSE;
- goto TIDYUP; /* Skip to end of function */
- }
+ /* Handle premature termination of SMTP */
- /* Handle message that is too big. Don't use host_or_ident() in the log
- message; we want to see the ident value even for non-remote messages. */
+ case END_EOF:
+ if (smtp_input)
+ {
+ Uunlink(spool_name); /* Lose data file when closed */
+ cancel_cutthrough_connection(TRUE, US"sender closed connection");
+ message_id[0] = 0; /* Indicate no message accepted */
+ smtp_reply = handle_lost_connection(US"");
+ smtp_yield = FALSE;
+ goto TIDYUP; /* Skip to end of function */
+ }
+ break;
- if (message_ended == END_SIZE)
- {
- Uunlink(spool_name); /* Lose the data file when closed */
- cancel_cutthrough_connection("mail too big");
- if (smtp_input) receive_swallow_smtp(); /* Swallow incoming SMTP */
+ /* Handle message that is too big. Don't use host_or_ident() in the log
+ message; we want to see the ident value even for non-remote messages. */
- log_write(L_size_reject, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
- "message too big: read=%d max=%d",
- sender_address,
- (sender_fullhost == NULL)? "" : " H=",
- (sender_fullhost == NULL)? US"" : sender_fullhost,
- (sender_ident == NULL)? "" : " U=",
- (sender_ident == NULL)? US"" : sender_ident,
- message_size,
- thismessage_size_limit);
+ case END_SIZE:
+ Uunlink(spool_name); /* Lose the data file when closed */
+ cancel_cutthrough_connection(TRUE, US"mail too big");
+ if (smtp_input) receive_swallow_smtp(); /* Swallow incoming SMTP */
- if (smtp_input)
- {
- smtp_reply = US"552 Message size exceeds maximum permitted";
- message_id[0] = 0; /* Indicate no message accepted */
- goto TIDYUP; /* Skip to end of function */
- }
- else
- {
- fseek(data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
- give_local_error(ERRMESS_TOOBIG,
- string_sprintf("message too big (max=%d)", thismessage_size_limit),
- US"message rejected: ", error_rc, data_file, header_list);
- /* Does not return */
- }
+ log_write(L_size_reject, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
+ "message too big: read=%d max=%d",
+ sender_address,
+ (sender_fullhost == NULL)? "" : " H=",
+ (sender_fullhost == NULL)? US"" : sender_fullhost,
+ (sender_ident == NULL)? "" : " U=",
+ (sender_ident == NULL)? US"" : sender_ident,
+ message_size,
+ thismessage_size_limit);
+
+ if (smtp_input)
+ {
+ smtp_reply = US"552 Message size exceeds maximum permitted";
+ message_id[0] = 0; /* Indicate no message accepted */
+ goto TIDYUP; /* Skip to end of function */
+ }
+ else
+ {
+ fseek(data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
+ give_local_error(ERRMESS_TOOBIG,
+ string_sprintf("message too big (max=%d)", thismessage_size_limit),
+ US"message rejected: ", error_rc, data_file, header_list);
+ /* Does not return */
+ }
+ break;
+
+ /* Handle bad BDAT protocol sequence */
+
+ case END_PROTOCOL:
+ Uunlink(spool_name); /* Lose the data file when closed */
+ cancel_cutthrough_connection(TRUE, US"sender protocol error");
+ smtp_reply = US""; /* Response already sent */
+ message_id[0] = 0; /* Indicate no message accepted */
+ goto TIDYUP; /* Skip to end of function */
}
}
log_write(0, LOG_MAIN, "Message abandoned: %s", msg);
Uunlink(spool_name); /* Lose the data file */
- cancel_cutthrough_connection("error writing spoolfile");
+ cancel_cutthrough_connection(TRUE, US"error writing spoolfile");
if (smtp_input)
{
{
Uunlink(spool_name);
(void)fclose(data_file);
- exim_exit(error_rc);
+ exim_exit(error_rc, US"receiving");
}
}
enable_dollar_recipients = TRUE;
if (recipients_count == 0)
- {
- blackholed_by = recipients_discarded? US"MAIL ACL" : US"RCPT ACL";
- }
+ blackholed_by = recipients_discarded ? US"MAIL ACL" : US"RCPT ACL";
+
else
{
/* Handle interactive SMTP messages */
#ifndef DISABLE_DKIM
if (!dkim_disable_verify)
{
- /* Finish verification, this will log individual signature results to
- the mainlog */
+ /* Finish verification */
dkim_exim_verify_finish();
/* Check if we must run the DKIM ACL */
- if ((acl_smtp_dkim != NULL) &&
- (dkim_verify_signers != NULL) &&
- (dkim_verify_signers[0] != '\0'))
+ if (acl_smtp_dkim && dkim_verify_signers && *dkim_verify_signers)
{
- uschar *dkim_verify_signers_expanded =
+ uschar * dkim_verify_signers_expanded =
expand_string(dkim_verify_signers);
- if (dkim_verify_signers_expanded == NULL)
- {
+ gstring * results = NULL;
+ int signer_sep = 0;
+ const uschar * ptr;
+ uschar * item;
+ gstring * seen_items = NULL;
+ int old_pool = store_pool;
+
+ store_pool = POOL_PERM; /* Allow created variables to live to data ACL */
+
+ if (!(ptr = dkim_verify_signers_expanded))
log_write(0, LOG_MAIN|LOG_PANIC,
"expansion of dkim_verify_signers option failed: %s",
expand_string_message);
- }
- else
- {
- int sep = 0;
- uschar *ptr = dkim_verify_signers_expanded;
- uschar *item = NULL;
- uschar *seen_items = NULL;
- int seen_items_size = 0;
- int seen_items_offset = 0;
- uschar itembuf[256];
- /* Default to OK when no items are present */
- rc = OK;
- while ((item = string_nextinlist(&ptr, &sep,
- itembuf,
- sizeof(itembuf))) != NULL)
- {
- /* Prevent running ACL for an empty item */
- if (!item || (item[0] == '\0')) continue;
- /* Only run ACL once for each domain or identity, no matter how often it
- appears in the expanded list. */
- if (seen_items != NULL)
- {
- uschar *seen_item = NULL;
- uschar seen_item_buf[256];
- uschar *seen_items_list = seen_items;
- int seen_this_item = 0;
-
- while ((seen_item = string_nextinlist(&seen_items_list, &sep,
- seen_item_buf,
- sizeof(seen_item_buf))) != NULL)
- {
- if (Ustrcmp(seen_item,item) == 0)
- {
- seen_this_item = 1;
- break;
- }
- }
-
- if (seen_this_item > 0)
- {
- DEBUG(D_receive)
- debug_printf("acl_smtp_dkim: skipping signer %s, already seen\n", item);
- continue;
- }
-
- seen_items = string_append(seen_items,&seen_items_size,&seen_items_offset,1,":");
- }
-
- seen_items = string_append(seen_items,&seen_items_size,&seen_items_offset,1,item);
- seen_items[seen_items_offset] = '\0';
- DEBUG(D_receive)
- debug_printf("calling acl_smtp_dkim for dkim_cur_signer=%s\n", item);
-
- dkim_exim_acl_setup(item);
- rc = acl_check(ACL_WHERE_DKIM, NULL, acl_smtp_dkim, &user_msg, &log_msg);
+ /* Default to OK when no items are present */
+ rc = OK;
+ while ((item = string_nextinlist(&ptr, &signer_sep, NULL, 0)))
+ {
+ /* Prevent running ACL for an empty item */
+ if (!item || !*item) continue;
+
+ /* Only run ACL once for each domain or identity,
+ no matter how often it appears in the expanded list. */
+ if (seen_items)
+ {
+ uschar * seen_item;
+ const uschar * seen_items_list = string_from_gstring(seen_items);
+ int seen_sep = ':';
+ BOOL seen_this_item = FALSE;
+
+ while ((seen_item = string_nextinlist(&seen_items_list, &seen_sep,
+ NULL, 0)))
+ if (Ustrcmp(seen_item,item) == 0)
+ {
+ seen_this_item = TRUE;
+ break;
+ }
+
+ if (seen_this_item)
+ {
+ DEBUG(D_receive)
+ debug_printf("acl_smtp_dkim: skipping signer %s, "
+ "already seen\n", item);
+ continue;
+ }
- if (rc != OK)
- {
- DEBUG(D_receive)
- debug_printf("acl_smtp_dkim: acl_check returned %d on %s, skipping remaining items\n", rc, item);
- cancel_cutthrough_connection("dkim acl not ok");
- break;
- }
- }
- add_acl_headers(ACL_WHERE_DKIM, US"DKIM");
- if (rc == DISCARD)
- {
- recipients_count = 0;
- blackholed_by = US"DKIM ACL";
- if (log_msg != NULL)
- blackhole_log_msg = string_sprintf(": %s", log_msg);
- }
- else if (rc != OK)
- {
- Uunlink(spool_name);
- if (smtp_handle_acl_fail(ACL_WHERE_DKIM, rc, user_msg, log_msg) != 0)
- smtp_yield = FALSE; /* No more messsages after dropped connection */
- smtp_reply = US""; /* Indicate reply already sent */
- message_id[0] = 0; /* Indicate no message accepted */
- goto TIDYUP; /* Skip to end of function */
- }
- }
+ seen_items = string_catn(seen_items, ":", 1);
+ }
+ seen_items = string_cat(seen_items, item);
+
+ rc = dkim_exim_acl_run(item, &results, &user_msg, &log_msg);
+ if (rc != OK)
+ {
+ DEBUG(D_receive)
+ debug_printf("acl_smtp_dkim: acl_check returned %d on %s, "
+ "skipping remaining items\n", rc, item);
+ cancel_cutthrough_connection(TRUE, US"dkim acl not ok");
+ break;
+ }
+ }
+ dkim_verify_status = string_from_gstring(results);
+ store_pool = old_pool;
+ add_acl_headers(ACL_WHERE_DKIM, US"DKIM");
+ if (rc == DISCARD)
+ {
+ recipients_count = 0;
+ blackholed_by = US"DKIM ACL";
+ if (log_msg)
+ blackhole_log_msg = string_sprintf(": %s", log_msg);
+ }
+ else if (rc != OK)
+ {
+ Uunlink(spool_name);
+ if (smtp_handle_acl_fail(ACL_WHERE_DKIM, rc, user_msg, log_msg) != 0)
+ smtp_yield = FALSE; /* No more messages after dropped connection */
+ smtp_reply = US""; /* Indicate reply already sent */
+ message_id[0] = 0; /* Indicate no message accepted */
+ goto TIDYUP; /* Skip to end of function */
+ }
}
+ else
+ dkim_exim_verify_log_all();
}
#endif /* DISABLE_DKIM */
int all_pass = OK;
int all_fail = FAIL;
- smtp_printf("353 PRDR content analysis beginning\r\n");
+ smtp_printf("353 PRDR content analysis beginning\r\n", TRUE);
/* Loop through recipients, responses must be in same order received */
for (c = 0; recipients_count > c; c++)
{
{
recipients_count = 0;
blackholed_by = US"DATA ACL";
- if (log_msg != NULL)
+ if (log_msg)
blackhole_log_msg = string_sprintf(": %s", log_msg);
- cancel_cutthrough_connection("data acl discard");
+ cancel_cutthrough_connection(TRUE, US"data acl discard");
}
else if (rc != OK)
{
Uunlink(spool_name);
- cancel_cutthrough_connection("data acl not ok");
+ cancel_cutthrough_connection(TRUE, US"data acl not ok");
#ifdef WITH_CONTENT_SCAN
unspool_mbox();
#endif
dcc_ok = 0;
#endif
if (smtp_handle_acl_fail(ACL_WHERE_DATA, rc, user_msg, log_msg) != 0)
- smtp_yield = FALSE; /* No more messsages after dropped connection */
+ smtp_yield = FALSE; /* No more messages after dropped connection */
smtp_reply = US""; /* Indicate reply already sent */
message_id[0] = 0; /* Indicate no message accepted */
goto TIDYUP; /* Skip to end of function */
version supplied with Exim always accepts, but this is a hook for sysadmins to
supply their own checking code. The local_scan() function is run even when all
the recipients have been discarded. */
+/*XXS could we avoid this for the standard case, given that few people will use it? */
lseek(data_fd, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
else
{
uschar *istemp = US"";
- uschar *s = NULL;
uschar *smtp_code;
- int size = 0;
- int sptr = 0;
+ gstring * g;
errmsg = local_scan_data;
goto TEMPREJECT;
case LOCAL_SCAN_REJECT_NOLOGHDR:
- log_extra_selector &= ~LX_rejected_header;
+ BIT_CLEAR(log_selector, log_selector_size, Li_rejected_header);
/* Fall through */
case LOCAL_SCAN_REJECT:
break;
case LOCAL_SCAN_TEMPREJECT_NOLOGHDR:
- log_extra_selector &= ~LX_rejected_header;
+ BIT_CLEAR(log_selector, log_selector_size, Li_rejected_header);
/* Fall through */
case LOCAL_SCAN_TEMPREJECT:
break;
}
- s = string_append(s, &size, &sptr, 2, US"F=",
- (sender_address[0] == 0)? US"<>" : sender_address);
- s = add_host_info_for_log(s, &size, &sptr);
- s[sptr] = 0;
+ g = string_append(g, 2, US"F=",
+ sender_address[0] == 0 ? US"<>" : sender_address);
+ g = add_host_info_for_log(g);
log_write(0, LOG_MAIN|LOG_REJECT, "%s %srejected by local_scan(): %.256s",
- s, istemp, string_printing(errmsg));
+ string_from_gstring(g), istemp, string_printing(errmsg));
if (smtp_input)
{
deliver_firsttime = TRUE;
#ifdef EXPERIMENTAL_BRIGHTMAIL
-if (bmi_run == 1) {
- /* rewind data file */
+if (bmi_run == 1)
+ { /* rewind data file */
lseek(data_fd, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
bmi_verdicts = bmi_process_message(header_list, data_fd);
-};
+ }
#endif
-/* Update the timstamp in our Received: header to account for any time taken by
+/* Update the timestamp in our Received: header to account for any time taken by
an ACL or by local_scan(). The new time is the time that all reception
processing is complete. */
/* Write the -H file */
else
- {
if ((msg_size = spool_write_header(message_id, SW_RECEIVING, &errmsg)) < 0)
{
log_write(0, LOG_MAIN, "Message abandoned: %s", errmsg);
/* Does not return */
}
}
- }
/* The message has now been successfully received. */
macro to simplify the coding. We log the arrival of a new message while the
file is still locked, just in case the machine is *really* fast, and delivers
it first! Include any message id that is in the message - since the syntax of a
-message id is actually an addr-spec, we can use the parse routine to canonicize
+message id is actually an addr-spec, we can use the parse routine to canonicalize
it. */
-size = 256;
-sptr = 0;
-s = store_get(size);
+g = string_get(256);
-s = string_append(s, &size, &sptr, 2, US"<= ",
- (sender_address[0] == 0)? US"<>" : sender_address);
-if (message_reference != NULL)
- s = string_append(s, &size, &sptr, 2, US" R=", message_reference);
+g = string_append(g, 2,
+ fake_response == FAIL ? US"(= " : US"<= ",
+ sender_address[0] == 0 ? US"<>" : sender_address);
+if (message_reference)
+ g = string_append(g, 2, US" R=", message_reference);
-s = add_host_info_for_log(s, &size, &sptr);
+g = add_host_info_for_log(g);
#ifdef SUPPORT_TLS
-if (log_extra_selector & LX_tls_cipher && tls_in.cipher)
- s = string_append(s, &size, &sptr, 2, US" X=", tls_in.cipher);
-if (log_extra_selector & LX_tls_certificate_verified && tls_in.cipher)
- s = string_append(s, &size, &sptr, 2, US" CV=",
- tls_in.certificate_verified? "yes":"no");
-if (log_extra_selector & LX_tls_peerdn && tls_in.peerdn)
- s = string_append(s, &size, &sptr, 3, US" DN=\"",
- string_printing(tls_in.peerdn), US"\"");
-if (log_extra_selector & LX_tls_sni && tls_in.sni)
- s = string_append(s, &size, &sptr, 3, US" SNI=\"",
- string_printing(tls_in.sni), US"\"");
+if (LOGGING(tls_cipher) && tls_in.cipher)
+ g = string_append(g, 2, US" X=", tls_in.cipher);
+if (LOGGING(tls_certificate_verified) && tls_in.cipher)
+ g = string_append(g, 2, US" CV=", tls_in.certificate_verified ? "yes":"no");
+if (LOGGING(tls_peerdn) && tls_in.peerdn)
+ g = string_append(g, 3, US" DN=\"", string_printing(tls_in.peerdn), US"\"");
+if (LOGGING(tls_sni) && tls_in.sni)
+ g = string_append(g, 3, US" SNI=\"", string_printing(tls_in.sni), US"\"");
#endif
if (sender_host_authenticated)
{
- s = string_append(s, &size, &sptr, 2, US" A=", sender_host_authenticated);
- if (authenticated_id != NULL)
+ g = string_append(g, 2, US" A=", sender_host_authenticated);
+ if (authenticated_id)
{
- s = string_append(s, &size, &sptr, 2, US":", authenticated_id);
- if (log_extra_selector & LX_smtp_mailauth && authenticated_sender != NULL)
- s = string_append(s, &size, &sptr, 2, US":", authenticated_sender);
+ g = string_append(g, 2, US":", authenticated_id);
+ if (LOGGING(smtp_mailauth) && authenticated_sender)
+ g = string_append(g, 2, US":", authenticated_sender);
}
}
#ifndef DISABLE_PRDR
if (prdr_requested)
- s = string_append(s, &size, &sptr, 1, US" PRDR");
+ g = string_catn(g, US" PRDR", 5);
#endif
-#ifdef EXPERIMENTAL_PROXY
-if (proxy_session && log_extra_selector & LX_proxy)
- s = string_append(s, &size, &sptr, 2, US" PRX=", proxy_host_address);
+#ifdef SUPPORT_PROXY
+if (proxy_session && LOGGING(proxy))
+ g = string_append(g, 2, US" PRX=", proxy_local_address);
#endif
+if (chunking_state > CHUNKING_OFFERED)
+ g = string_catn(g, US" K", 2);
+
sprintf(CS big_buffer, "%d", msg_size);
-s = string_append(s, &size, &sptr, 2, US" S=", big_buffer);
+g = string_append(g, 2, US" S=", big_buffer);
/* log 8BITMIME mode announced in MAIL_FROM
0 ... no BODY= used
7 ... 7BIT
8 ... 8BITMIME */
-if (log_extra_selector & LX_8bitmime)
+if (LOGGING(8bitmime))
{
sprintf(CS big_buffer, "%d", body_8bitmime);
- s = string_append(s, &size, &sptr, 2, US" M8S=", big_buffer);
+ g = string_append(g, 2, US" M8S=", big_buffer);
}
+if (*queue_name)
+ g = string_append(g, 2, US" Q=", queue_name);
+
/* If an addr-spec in a message-id contains a quoted string, it can contain
any characters except " \ and CR and so in particular it can contain NL!
Therefore, make sure we use a printing-characters only version for the log.
Also, allow for domain literals in the message id. */
-if (msgid_header != NULL)
+if (msgid_header)
{
uschar *old_id;
BOOL save_allow_domain_literals = allow_domain_literals;
&errmsg, &start, &end, &domain, FALSE);
allow_domain_literals = save_allow_domain_literals;
if (old_id != NULL)
- s = string_append(s, &size, &sptr, 2, US" id=", string_printing(old_id));
+ g = string_append(g, 2, US" id=", string_printing(old_id));
}
/* If subject logging is turned on, create suitable printing-character
text. By expanding $h_subject: we make use of the MIME decoding. */
-if ((log_extra_selector & LX_subject) != 0 && subject_header != NULL)
+if (LOGGING(subject) && subject_header != NULL)
{
int i;
uschar *p = big_buffer;
}
*p++ = '\"';
*p = 0;
- s = string_append(s, &size, &sptr, 2, US" T=", string_printing(big_buffer));
+ g = string_append(g, 2, US" T=", string_printing(big_buffer));
}
/* Terminate the string: string_cat() and string_append() leave room, but do
not put the zero in. */
-s[sptr] = 0;
+(void) string_from_gstring(g);
/* Create a message log file if message logs are being used and this message is
not blackholed. Write the reception stuff to it. We used to leave message log
creation until the first delivery, but this has proved confusing for some
people. */
-if (message_logs && blackholed_by == NULL)
+if (message_logs && !blackholed_by)
{
int fd;
- sprintf(CS spool_name, "%s/msglog/%s/%s", spool_directory, message_subdir,
- message_id);
- fd = Uopen(spool_name, O_WRONLY|O_APPEND|O_CREAT, SPOOL_MODE);
-
- if (fd < 0 && errno == ENOENT)
+ spool_name = spool_fname(US"msglog", message_subdir, message_id, US"");
+
+ if ( (fd = Uopen(spool_name, O_WRONLY|O_APPEND|O_CREAT, SPOOL_MODE)) < 0
+ && errno == ENOENT
+ )
{
- uschar temp[16];
- sprintf(CS temp, "msglog/%s", message_subdir);
- if (message_subdir[0] == 0) temp[6] = 0;
- (void)directory_make(spool_directory, temp, MSGLOG_DIRECTORY_MODE, TRUE);
+ (void)directory_make(spool_directory,
+ spool_sname(US"msglog", message_subdir),
+ MSGLOG_DIRECTORY_MODE, TRUE);
fd = Uopen(spool_name, O_WRONLY|O_APPEND|O_CREAT, SPOOL_MODE);
}
if (fd < 0)
- {
log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't open message log %s: %s",
spool_name, strerror(errno));
- }
-
else
{
FILE *message_log = fdopen(fd, "a");
else
{
uschar *now = tod_stamp(tod_log);
- fprintf(message_log, "%s Received from %s\n", now, s+3);
+ fprintf(message_log, "%s Received from %s\n", now, g->s+3);
if (deliver_freeze) fprintf(message_log, "%s frozen by %s\n", now,
frozen_by);
if (queue_only_policy) fprintf(message_log,
- "%s no immediate delivery: queued by %s\n", now, queued_by);
+ "%s no immediate delivery: queued%s%s by %s\n", now,
+ *queue_name ? " in " : "", *queue_name ? CS queue_name : "",
+ queued_by);
(void)fclose(message_log);
}
}
if (select(fileno(smtp_in) + 1, &select_check, NULL, NULL, &tv) != 0)
{
- int c = (receive_getc)();
+ int c = (receive_getc)(GETC_BUFFER_UNLIMITED);
if (c != EOF) (receive_ungetc)(c); else
{
- uschar *msg = US"SMTP connection lost after final dot";
+ smtp_notquit_exit(US"connection-lost", NULL, NULL);
smtp_reply = US""; /* No attempt to send a response */
smtp_yield = FALSE; /* Nothing more on this connection */
/* Re-use the log line workspace */
- sptr = 0;
- s = string_cat(s, &size, &sptr, msg, Ustrlen(msg));
- s = add_host_info_for_log(s, &size, &sptr);
- s[sptr] = 0;
- log_write(0, LOG_MAIN, "%s", s);
+ g->ptr = 0;
+ g = string_cat(g, US"SMTP connection lost after final dot");
+ g = add_host_info_for_log(g);
+ log_write(0, LOG_MAIN, "%s", string_from_gstring(g));
/* Delete the files for this aborted message. */
- sprintf(CS spool_name, "%s/input/%s/%s-D", spool_directory,
- message_subdir, message_id);
- Uunlink(spool_name);
-
- sprintf(CS spool_name, "%s/input/%s/%s-H", spool_directory,
- message_subdir, message_id);
- Uunlink(spool_name);
-
- sprintf(CS spool_name, "%s/msglog/%s/%s", spool_directory,
- message_subdir, message_id);
- Uunlink(spool_name);
+ Uunlink(spool_fname(US"input", message_subdir, message_id, US"-D"));
+ Uunlink(spool_fname(US"input", message_subdir, message_id, US"-H"));
+ Uunlink(spool_fname(US"msglog", message_subdir, message_id, US""));
goto TIDYUP;
}
Send dot onward. If accepted, wipe the spooled files, log as delivered and accept
the sender's dot (below).
- If rejected: copy response to sender, wipe the spooled files, log approriately.
- If temp-reject: accept to sender, keep the spooled files.
+ If rejected: copy response to sender, wipe the spooled files, log appropriately.
+ If temp-reject: normally accept to sender, keep the spooled file - unless defer=pass
+ in which case pass temp-reject back to initiator and dump the files.
Having the normal spool files lets us do data-filtering, and store/forward on temp-reject.
XXX We do not handle queue-only, freezing, or blackholes.
*/
-if(cutthrough_fd >= 0)
+if(cutthrough.fd >= 0 && cutthrough.delivery)
{
- uschar * msg= cutthrough_finaldot(); /* Ask the target system to accept the messsage */
+ uschar * msg = cutthrough_finaldot(); /* Ask the target system to accept the message */
/* Logging was done in finaldot() */
switch(msg[0])
{
cutthrough_done = ACCEPTED;
break; /* message_id needed for SMTP accept below */
+ case '4': /* Temp-reject. Keep spoolfiles and accept, unless defer-pass mode.
+ ... for which, pass back the exact error */
+ if (cutthrough.defer_pass) smtp_reply = string_copy_malloc(msg);
+ /*FALLTRHOUGH*/
+
default: /* Unknown response, or error. Treat as temp-reject. */
- case '4': /* Temp-reject. Keep spoolfiles and accept. */
cutthrough_done = TMP_REJ; /* Avoid the usual immediate delivery attempt */
break; /* message_id needed for SMTP accept below */
case '5': /* Perm-reject. Do the same to the source. Dump any spoolfiles */
- smtp_reply= msg; /* Pass on the exact error */
+ smtp_reply = string_copy_malloc(msg); /* Pass on the exact error */
cutthrough_done = PERM_REJ;
break;
}
#endif
{
log_write(0, LOG_MAIN |
- (((log_extra_selector & LX_received_recipients) != 0)? LOG_RECIPIENTS : 0) |
- (((log_extra_selector & LX_received_sender) != 0)? LOG_SENDER : 0),
- "%s", s);
+ (LOGGING(received_recipients)? LOG_RECIPIENTS : 0) |
+ (LOGGING(received_sender)? LOG_SENDER : 0),
+ "%s", g->s);
/* Log any control actions taken by an ACL or local_scan(). */
if (deliver_freeze) log_write(0, LOG_MAIN, "frozen by %s", frozen_by);
if (queue_only_policy) log_write(L_delay_delivery, LOG_MAIN,
- "no immediate delivery: queued by %s", queued_by);
+ "no immediate delivery: queued%s%s by %s",
+ *queue_name ? " in " : "", *queue_name ? CS queue_name : "",
+ queued_by);
}
receive_call_bombout = FALSE;
-store_reset(s); /* The store for the main log message can be reused */
+store_reset(g); /* The store for the main log message can be reused */
/* If the message is frozen, and freeze_tell is set, do the telling. */
if (!smtp_batched_input)
{
- if (smtp_reply == NULL)
+ if (!smtp_reply)
{
if (fake_response != OK)
- smtp_respond((fake_response == DEFER)? US"450" : US"550", 3, TRUE,
- fake_response_text);
+ smtp_respond(fake_response == DEFER ? US"450" : US"550",
+ 3, TRUE, fake_response_text);
/* An OK response is required; use "message" text if present. */
- else if (user_msg != NULL)
+ else if (user_msg)
{
uschar *code = US"250";
int len = 3;
- smtp_message_code(&code, &len, &user_msg, NULL);
+ smtp_message_code(&code, &len, &user_msg, NULL, TRUE);
smtp_respond(code, len, TRUE, user_msg);
}
/* Default OK response */
+ else if (chunking_state > CHUNKING_OFFERED)
+ {
+ smtp_printf("250- %u byte chunk, total %d\r\n250 OK id=%s\r\n", FALSE,
+ chunking_datasize, message_size+message_linecount, message_id);
+ chunking_state = CHUNKING_OFFERED;
+ }
else
- smtp_printf("250 OK id=%s\r\n", message_id);
+ smtp_printf("250 OK id=%s\r\n", FALSE, message_id);
+
if (host_checking)
fprintf(stdout,
"\n**** SMTP testing: that is not a real message id!\n\n");
/* smtp_reply is set non-empty */
else if (smtp_reply[0] != 0)
- {
if (fake_response != OK && (smtp_reply[0] == '2'))
smtp_respond((fake_response == DEFER)? US"450" : US"550", 3, TRUE,
fake_response_text);
else
- smtp_printf("%.1024s\r\n", smtp_reply);
- }
+ smtp_printf("%.1024s\r\n", FALSE, smtp_reply);
switch (cutthrough_done)
{
- case ACCEPTED: log_write(0, LOG_MAIN, "Completed");/* Delivery was done */
- case PERM_REJ: { /* Delete spool files */
- sprintf(CS spool_name, "%s/input/%s/%s-D", spool_directory,
- message_subdir, message_id);
- Uunlink(spool_name);
- sprintf(CS spool_name, "%s/input/%s/%s-H", spool_directory,
- message_subdir, message_id);
- Uunlink(spool_name);
- sprintf(CS spool_name, "%s/msglog/%s/%s", spool_directory,
- message_subdir, message_id);
- Uunlink(spool_name);
- }
- case TMP_REJ: message_id[0] = 0; /* Prevent a delivery from starting */
- default:break;
+ case ACCEPTED:
+ log_write(0, LOG_MAIN, "Completed");/* Delivery was done */
+ case PERM_REJ:
+ /* Delete spool files */
+ Uunlink(spool_fname(US"input", message_subdir, message_id, US"-D"));
+ Uunlink(spool_fname(US"input", message_subdir, message_id, US"-H"));
+ Uunlink(spool_fname(US"msglog", message_subdir, message_id, US""));
+ break;
+
+ case TMP_REJ:
+ if (cutthrough.defer_pass)
+ {
+ Uunlink(spool_fname(US"input", message_subdir, message_id, US"-D"));
+ Uunlink(spool_fname(US"input", message_subdir, message_id, US"-H"));
+ Uunlink(spool_fname(US"msglog", message_subdir, message_id, US""));
+ }
+ default:
+ break;
+ }
+ if (cutthrough_done != NOT_TRIED)
+ {
+ message_id[0] = 0; /* Prevent a delivery from starting */
+ cutthrough.delivery = cutthrough.callout_hold_only = FALSE;
+ cutthrough.defer_pass = FALSE;
}
- cutthrough_delivery = FALSE;
}
/* For batched SMTP, generate an error message on failure, and do
nothing on success. The function moan_smtp_batch() does not return -
it exits from the program with a non-zero return code. */
- else if (smtp_reply != NULL) moan_smtp_batch(NULL, "%s", smtp_reply);
+ else if (smtp_reply)
+ moan_smtp_batch(NULL, "%s", smtp_reply);
}
We must now indicate that nothing was received, to prevent a delivery from
starting. */
-if (blackholed_by != NULL)
+if (blackholed_by)
{
- uschar *detail = (local_scan_data != NULL)?
- string_printing(local_scan_data) :
- string_sprintf("(%s discarded recipients)", blackholed_by);
+ const uschar *detail = local_scan_data
+ ? string_printing(local_scan_data)
+ : string_sprintf("(%s discarded recipients)", blackholed_by);
log_write(0, LOG_MAIN, "=> blackhole %s%s", detail, blackhole_log_msg);
log_write(0, LOG_MAIN, "Completed");
message_id[0] = 0;
git://git.exim.org / exim.git / blobdiff