* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2016 */
+/* Copyright (c) The Exim Maintainers 2020 - 2022 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/* The main function: entry point, initialization, and high-level control.
# include <gnu/libc-version.h>
#endif
+#ifndef _TIME_H
+# include <time.h>
+#endif
+#ifndef NO_EXECINFO
+# include <execinfo.h>
+#endif
+
#ifdef USE_GNUTLS
# include <gnutls/gnutls.h>
# if GNUTLS_VERSION_NUMBER < 0x030103 && !defined(DISABLE_OCSP)
for store allocation via Exim's store manager. The normal calls are actually
macros that pass over location information to make tracing easier. These
functions just interface to the standard macro calls. A good compiler will
-optimize out the tail recursion and so not make them too expensive. There
-are two sets of functions; one for use when we want to retain the compiled
-regular expression for a long time; the other for short-term use. */
+optimize out the tail recursion and so not make them too expensive. */
static void *
-function_store_get(size_t size)
+function_store_malloc(PCRE2_SIZE size, void * tag)
{
-return store_get((int)size);
+return store_malloc((int)size);
}
static void
-function_dummy_free(void *block) { block = block; }
+function_store_free(void * block, void * tag)
+{
+/* At least some version of pcre2 pass a null pointer */
+if (block) store_free(block);
+}
+
static void *
-function_store_malloc(size_t size)
+function_store_get(PCRE2_SIZE size, void * tag)
{
-return store_malloc((int)size);
+return store_get((int)size, GET_UNTAINTED); /* loses track of taint */
}
static void
-function_store_free(void *block)
+function_store_nullfree(void * block, void * tag)
{
-store_free(block);
}
-/*************************************************
-* Compile regular expression and panic on fail *
-*************************************************/
-
-/* This function is called when failure to compile a regular expression leads
-to a panic exit. In other cases, pcre_compile() is called directly. In many
-cases where this function is used, the results of the compilation are to be
-placed in long-lived store, so we temporarily reset the store management
-functions that PCRE uses if the use_malloc flag is set.
-
-Argument:
- pattern the pattern to compile
- caseless TRUE if caseless matching is required
- use_malloc TRUE if compile into malloc store
+static void
+pcre_init(void)
+{
+pcre_mlc_ctx = pcre2_general_context_create(function_store_malloc, function_store_free, NULL);
+pcre_gen_ctx = pcre2_general_context_create(function_store_get, function_store_nullfree, NULL);
-Returns: pointer to the compiled pattern
-*/
+pcre_mlc_cmp_ctx = pcre2_compile_context_create(pcre_mlc_ctx);
+pcre_gen_cmp_ctx = pcre2_compile_context_create(pcre_gen_ctx);
-const pcre *
-regex_must_compile(const uschar *pattern, BOOL caseless, BOOL use_malloc)
-{
-int offset;
-int options = PCRE_COPT;
-const pcre *yield;
-const uschar *error;
-if (use_malloc)
- {
- pcre_malloc = function_store_malloc;
- pcre_free = function_store_free;
- }
-if (caseless) options |= PCRE_CASELESS;
-yield = pcre_compile(CCS pattern, options, (const char **)&error, &offset, NULL);
-pcre_malloc = function_store_get;
-pcre_free = function_dummy_free;
-if (yield == NULL)
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "regular expression error: "
- "%s at offset %d while compiling %s", error, offset, pattern);
-return yield;
+pcre_gen_mtc_ctx = pcre2_match_context_create(pcre_gen_ctx);
}
*************************************************/
/* This function runs a regular expression match, and sets up the pointers to
-the matched substrings.
+the matched substrings. The matched strings are copied so the lifetime of
+the subject is not a problem. Matched strings will have the same taint status
+as the subject string (this is not a de-taint method, and must not be made so
+given the support for wildcards in REs).
Arguments:
re the compiled expression
if >= 0 setup from setup+1 onwards,
excluding the full matched string
-Returns: TRUE or FALSE
+Returns: TRUE if matched, or FALSE
*/
BOOL
-regex_match_and_setup(const pcre *re, const uschar *subject, int options, int setup)
+regex_match_and_setup(const pcre2_code * re, const uschar * subject, int options, int setup)
{
-int ovector[3*(EXPAND_MAXN+1)];
-uschar * s = string_copy(subject); /* de-constifying */
-int n = pcre_exec(re, NULL, CS s, Ustrlen(s), 0,
- PCRE_EOPT | options, ovector, sizeof(ovector)/sizeof(int));
-BOOL yield = n >= 0;
-if (n == 0) n = EXPAND_MAXN + 1;
-if (yield)
+pcre2_match_data * md = pcre2_match_data_create_from_pattern(re, pcre_gen_ctx);
+int res = pcre2_match(re, (PCRE2_SPTR)subject, PCRE2_ZERO_TERMINATED, 0,
+ PCRE_EOPT | options, md, pcre_gen_mtc_ctx);
+BOOL yield;
+
+if ((yield = (res >= 0)))
{
- int nn;
- expand_nmax = (setup < 0)? 0 : setup + 1;
- for (nn = (setup < 0)? 0 : 2; nn < n*2; nn += 2)
+ PCRE2_SIZE * ovec = pcre2_get_ovector_pointer(md);
+ res = pcre2_get_ovector_count(md);
+ expand_nmax = setup < 0 ? 0 : setup + 1;
+ for (int matchnum = setup < 0 ? 0 : 1; matchnum < res; matchnum++)
{
- expand_nstring[expand_nmax] = s + ovector[nn];
- expand_nlength[expand_nmax++] = ovector[nn+1] - ovector[nn];
+ /* Although PCRE2 has a pcre2_substring_get_bynumber() conveneience, it
+ seems to return a bad pointer when a capture group had no data, eg. (.*)
+ matching zero letters. So use the underlying ovec and hope (!) that the
+ offsets are sane (including that case). Should we go further and range-
+ check each one vs. the subject string length? */
+ int off = matchnum * 2;
+ int len = ovec[off + 1] - ovec[off];
+ expand_nstring[expand_nmax] = string_copyn(subject + ovec[off], len);
+ expand_nlength[expand_nmax++] = len;
}
expand_nmax--;
}
+else if (res != PCRE2_ERROR_NOMATCH) DEBUG(D_any)
+ {
+ uschar errbuf[128];
+ pcre2_get_error_message(res, errbuf, sizeof(errbuf));
+ debug_printf_indent("pcre2: %s\n", errbuf);
+ }
+/* pcre2_match_data_free(md); gen ctx needs no free */
return yield;
}
+/* Check just for match with regex. Uses the common memory-handling.
+
+Arguments:
+ re compiled regex
+ subject string to be checked
+ slen length of subject; -1 for nul-terminated
+ rptr pointer for matched string, copied, or NULL
+
+Return: TRUE for a match.
+*/
+
+BOOL
+regex_match(const pcre2_code * re, const uschar * subject, int slen, uschar ** rptr)
+{
+pcre2_match_data * md = pcre2_match_data_create(1, pcre_gen_ctx);
+int rc = pcre2_match(re, (PCRE2_SPTR)subject,
+ slen >= 0 ? slen : PCRE2_ZERO_TERMINATED,
+ 0, PCRE_EOPT, md, pcre_gen_mtc_ctx);
+PCRE2_SIZE * ovec = pcre2_get_ovector_pointer(md);
+BOOL ret = FALSE;
+
+if (rc >= 0)
+ {
+ if (rptr)
+ *rptr = string_copyn(subject + ovec[0], ovec[1] - ovec[0]);
+ ret = TRUE;
+ }
+/* pcre2_match_data_free(md); gen ctx needs no free */
+return ret;
+}
+
/*************************************************
void
set_process_info(const char *format, ...)
{
-int len = sprintf(CS process_info, "%5d ", (int)getpid());
+gstring gs = { .size = PROCESS_INFO_SIZE - 2, .ptr = 0, .s = process_info };
+gstring * g;
+int len;
va_list ap;
+
+g = string_fmt_append(&gs, "%5d ", (int)getpid());
+len = g->ptr;
va_start(ap, format);
-if (!string_vformat(process_info + len, PROCESS_INFO_SIZE - len - 2, format, ap))
- Ustrcpy(process_info + len, "**** string overflowed buffer ****");
-len = Ustrlen(process_info);
-process_info[len+0] = '\n';
-process_info[len+1] = '\0';
-process_info_len = len + 1;
+if (!string_vformat(g, 0, format, ap))
+ {
+ gs.ptr = len;
+ g = string_cat(&gs, US"**** string overflowed buffer ****");
+ }
+g = string_catn(g, US"\n", 1);
+string_from_gstring(g);
+process_info_len = g->ptr;
DEBUG(D_process_info) debug_printf("set_process_info: %s", process_info);
va_end(ap);
}
+/***********************************************
+* Handler for SIGTERM *
+***********************************************/
+
+static void
+term_handler(int sig)
+{
+exit(1);
+}
+
+
+/***********************************************
+* Handler for SIGSEGV *
+***********************************************/
+
+#define STACKDUMP_MAX 24
+void
+stackdump(void)
+{
+#ifndef NO_EXECINFO
+void * buf[STACKDUMP_MAX];
+char ** ss;
+int nptrs = backtrace(buf, STACKDUMP_MAX);
+
+log_write(0, LOG_MAIN|LOG_PANIC, "backtrace");
+log_write(0, LOG_MAIN|LOG_PANIC, "---");
+if ((ss = backtrace_symbols(buf, nptrs)))
+ {
+ for (int i = 0; i < nptrs; i++)
+ log_write(0, LOG_MAIN|LOG_PANIC, "\t%s", ss[i]);
+ free(ss);
+ }
+else
+ log_write(0, LOG_MAIN|LOG_PANIC, "backtrace_symbols: %s", strerror(errno));
+log_write(0, LOG_MAIN|LOG_PANIC, "---");
+#endif
+}
+#undef STACKDUMP_MAX
+
+
+static void
+#ifdef SA_SIGINFO
+segv_handler(int sig, siginfo_t * info, void * uctx)
+{
+log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (fault address: %p)", info->si_addr);
+# if defined(SEGV_MAPERR) && defined(SEGV_ACCERR) && defined(SEGV_BNDERR) && defined(SEGV_PKUERR)
+switch (info->si_code)
+ {
+ case SEGV_MAPERR: log_write(0, LOG_MAIN|LOG_PANIC, "SEGV_MAPERR"); break;
+ case SEGV_ACCERR: log_write(0, LOG_MAIN|LOG_PANIC, "SEGV_ACCERR"); break;
+ case SEGV_BNDERR: log_write(0, LOG_MAIN|LOG_PANIC, "SEGV_BNDERR"); break;
+ case SEGV_PKUERR: log_write(0, LOG_MAIN|LOG_PANIC, "SEGV_PKUERR"); break;
+ }
+# endif
+if (US info->si_addr < US 4096)
+ log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (null pointer indirection)");
+else
+ log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (maybe attempt to write to immutable memory)");
+if (process_info_len > 0)
+ log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (%.*s)", process_info_len, process_info);
+stackdump();
+signal(SIGSEGV, SIG_DFL);
+kill(getpid(), sig);
+}
+#else
+segv_handler(int sig)
+{
+log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (maybe attempt to write to immutable memory)");
+if (process_info_len > 0)
+ log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (%.*s)", process_info_len, process_info);
+stackdump();
+signal(SIGSEGV, SIG_DFL);
+kill(getpid(), sig);
+}
+#endif
/*************************************************
os_restarting_signal(sig, usr1_handler);
-if ((fd = Uopen(process_log_path, O_APPEND|O_WRONLY, LOG_MODE)) < 0)
- {
- /* If we are already running as the Exim user, try to create it in the
- current process (assuming spool_directory exists). Otherwise, if we are
- root, do the creation in an exim:exim subprocess. */
-
- int euid = geteuid();
- if (euid == exim_uid)
- fd = Uopen(process_log_path, O_CREAT|O_APPEND|O_WRONLY, LOG_MODE);
- else if (euid == root_uid)
- fd = log_create_as_exim(process_log_path);
- }
+if (!process_log_path) return;
+fd = log_open_as_exim(process_log_path);
/* If we are neither exim nor root, or if we failed to create the log file,
give up. There is not much useful we can do with errors, since we don't want
void
sigalrm_handler(int sig)
{
-sig = sig; /* Keep picky compilers happy */
sigalrm_seen = TRUE;
os_non_restarting_signal(SIGALRM, sigalrm_handler);
}
when a bug in a function that calls milliwait() caused it to pass invalid data.
That's when I added the check. :-)
-We assume it to be not worth sleeping for under 100us; this value will
+We assume it to be not worth sleeping for under 50us; this value will
require revisiting as hardware advances. This avoids the issue of
a zero-valued timer setting meaning "never fire".
{
sigset_t sigmask;
sigset_t old_sigmask;
+int save_errno = errno;
-if (itval->it_value.tv_usec < 100 && itval->it_value.tv_sec == 0)
+if (itval->it_value.tv_usec < 50 && itval->it_value.tv_sec == 0)
return;
(void)sigemptyset(&sigmask); /* Empty mask */
(void)sigaddset(&sigmask, SIGALRM); /* Add SIGALRM */
(void)sigdelset(&sigmask, SIGALRM); /* Remove SIGALRM */
(void)sigsuspend(&sigmask); /* Until SIGALRM */
(void)sigprocmask(SIG_SETMASK, &old_sigmask, NULL); /* Restore mask */
+errno = save_errno;
+sigalrm_seen = FALSE;
}
void
millisleep(int msec)
{
-struct itimerval itval;
-itval.it_interval.tv_sec = 0;
-itval.it_interval.tv_usec = 0;
-itval.it_value.tv_sec = msec/1000;
-itval.it_value.tv_usec = (msec % 1000) * 1000;
+struct itimerval itval = {.it_interval = {.tv_sec = 0, .tv_usec = 0},
+ .it_value = {.tv_sec = msec/1000,
+ .tv_usec = (msec % 1000) * 1000}};
milliwait(&itval);
}
* Clock tick wait function *
*************************************************/
+#ifdef _POSIX_MONOTONIC_CLOCK
+# ifdef CLOCK_BOOTTIME
+# define EXIM_CLOCKTYPE CLOCK_BOOTTIME
+# else
+# define EXIM_CLOCKTYPE CLOCK_MONOTONIC
+# endif
+
+/* Amount EXIM_CLOCK is behind realtime, at startup. */
+static struct timespec offset_ts;
+
+static void
+exim_clock_init(void)
+{
+struct timeval tv;
+if (clock_gettime(EXIM_CLOCKTYPE, &offset_ts) != 0) return;
+(void)gettimeofday(&tv, NULL);
+offset_ts.tv_sec = tv.tv_sec - offset_ts.tv_sec;
+offset_ts.tv_nsec = tv.tv_usec * 1000 - offset_ts.tv_nsec;
+if (offset_ts.tv_nsec >= 0) return;
+offset_ts.tv_sec--;
+offset_ts.tv_nsec += 1000*1000*1000;
+}
+#endif
+
+
+void
+exim_gettime(struct timeval * tv)
+{
+#ifdef _POSIX_MONOTONIC_CLOCK
+struct timespec now_ts;
+
+if (clock_gettime(EXIM_CLOCKTYPE, &now_ts) == 0)
+ {
+ now_ts.tv_sec += offset_ts.tv_sec;
+ if ((now_ts.tv_nsec += offset_ts.tv_nsec) >= 1000*1000*1000)
+ {
+ now_ts.tv_sec++;
+ now_ts.tv_nsec -= 1000*1000*1000;
+ }
+ tv->tv_sec = now_ts.tv_sec;
+ tv->tv_usec = now_ts.tv_nsec / 1000;
+ }
+else
+#endif
+ (void)gettimeofday(tv, NULL);
+}
+
+
/* Exim uses a time + a pid to generate a unique identifier in two places: its
message IDs, and in file names for maildir deliveries. Because some OS now
re-use pids within the same second, sub-second times are now being used.
clocks that go backwards.
Arguments:
- then_tv A timeval which was used to create uniqueness; its usec field
+ prev_tv A timeval which was used to create uniqueness; its usec field
has been rounded down to the value of the resolution.
We want to be sure the current time is greater than this.
+ On return, updated to current (rounded down).
resolution The resolution that was used to divide the microseconds
(1 for maildir, larger for message ids)
*/
void
-exim_wait_tick(struct timeval *then_tv, int resolution)
+exim_wait_tick(struct timeval * prev_tv, int resolution)
{
struct timeval now_tv;
long int now_true_usec;
-(void)gettimeofday(&now_tv, NULL);
+exim_gettime(&now_tv);
now_true_usec = now_tv.tv_usec;
now_tv.tv_usec = (now_true_usec/resolution) * resolution;
-if (exim_tvcmp(&now_tv, then_tv) <= 0)
+while (exim_tvcmp(&now_tv, prev_tv) <= 0)
{
struct itimerval itval;
itval.it_interval.tv_sec = 0;
itval.it_interval.tv_usec = 0;
- itval.it_value.tv_sec = then_tv->tv_sec - now_tv.tv_sec;
- itval.it_value.tv_usec = then_tv->tv_usec + resolution - now_true_usec;
+ itval.it_value.tv_sec = prev_tv->tv_sec - now_tv.tv_sec;
+ itval.it_value.tv_usec = prev_tv->tv_usec + resolution - now_true_usec;
/* We know that, overall, "now" is less than or equal to "then". Therefore, a
negative value for the microseconds is possible only in the case when "now"
- is more than a second less than "then". That means that itval.it_value.tv_sec
+ is more than a second less than "tgt". That means that itval.it_value.tv_sec
is greater than zero. The following correction is therefore safe. */
if (itval.it_value.tv_usec < 0)
DEBUG(D_transport|D_receive)
{
- if (!running_in_test_harness)
+ if (!f.running_in_test_harness)
{
debug_printf("tick check: " TIME_T_FMT ".%06lu " TIME_T_FMT ".%06lu\n",
- then_tv->tv_sec, (long) then_tv->tv_usec,
+ prev_tv->tv_sec, (long) prev_tv->tv_usec,
now_tv.tv_sec, (long) now_tv.tv_usec);
- debug_printf("waiting " TIME_T_FMT ".%06lu\n",
+ debug_printf("waiting " TIME_T_FMT ".%06lu sec\n",
itval.it_value.tv_sec, (long) itval.it_value.tv_usec);
}
}
milliwait(&itval);
+
+ /* Be prapared to go around if the kernel does not implement subtick
+ granularity (GNU Hurd) */
+
+ exim_gettime(&now_tv);
+ now_true_usec = now_tv.tv_usec;
+ now_tv.tv_usec = (now_true_usec/resolution) * resolution;
}
+*prev_tv = now_tv;
}
}
-
-
/*************************************************
* Ensure stdin, stdout, and stderr exist *
*************************************************/
void
exim_nullstd(void)
{
-int i;
int devnull = -1;
struct stat statbuf;
-for (i = 0; i <= 2; i++)
+for (int i = 0; i <= 2; i++)
{
if (fstat(i, &statbuf) < 0 && errno == EBADF)
{
if (devnull < 0) devnull = open("/dev/null", O_RDWR);
if (devnull < 0) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s",
- string_open_failed(errno, "/dev/null"));
+ string_open_failed("/dev/null", NULL));
if (devnull != i) (void)dup2(devnull, i);
}
}
{
if (smtp_input)
{
- #ifdef SUPPORT_TLS
- tls_close(TRUE, FALSE); /* Shut down the TLS library */
- #endif
+#ifndef DISABLE_TLS
+ tls_close(NULL, TLS_NO_SHUTDOWN); /* Shut down the TLS library */
+#endif
(void)close(fileno(smtp_in));
(void)close(fileno(smtp_out));
smtp_in = NULL;
if ((debug_selector & D_resolver) == 0) (void)close(1); /* stdout */
if (debug_selector == 0) /* stderr */
{
- if (!synchronous_delivery)
+ if (!f.synchronous_delivery)
{
(void)close(2);
log_stderr = NULL;
*/
void
-exim_setugid(uid_t uid, gid_t gid, BOOL igflag, uschar *msg)
+exim_setugid(uid_t uid, gid_t gid, BOOL igflag, const uschar * msg)
{
uid_t euid = geteuid();
gid_t egid = getegid();
if (igflag)
{
struct passwd *pw = getpwuid(uid);
- if (pw != NULL)
- {
- if (initgroups(pw->pw_name, gid) != 0)
- log_write(0,LOG_MAIN|LOG_PANIC_DIE,"initgroups failed for uid=%ld: %s",
- (long int)uid, strerror(errno));
- }
- else log_write(0, LOG_MAIN|LOG_PANIC_DIE, "cannot run initgroups(): "
- "no passwd entry for uid=%ld", (long int)uid);
+ if (!pw)
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "cannot run initgroups(): "
+ "no passwd entry for uid=%ld", (long int)uid);
+
+ if (initgroups(pw->pw_name, gid) != 0)
+ log_write(0,LOG_MAIN|LOG_PANIC_DIE,"initgroups failed for uid=%ld: %s",
+ (long int)uid, strerror(errno));
}
if (setgid(gid) < 0 || setuid(uid) < 0)
- {
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "unable to set gid=%ld or uid=%ld "
"(euid=%ld): %s", (long int)gid, (long int)uid, (long int)euid, msg);
- }
}
/* Debugging output included uid/gid and all groups */
DEBUG(D_uid)
{
int group_count, save_errno;
- gid_t group_list[NGROUPS_MAX];
+ gid_t group_list[EXIM_GROUPLIST_SIZE];
debug_printf("changed uid/gid: %s\n uid=%ld gid=%ld pid=%ld\n", msg,
(long int)geteuid(), (long int)getegid(), (long int)getpid());
- group_count = getgroups(NGROUPS_MAX, group_list);
+ group_count = getgroups(nelem(group_list), group_list);
save_errno = errno;
debug_printf(" auxiliary group list:");
if (group_count > 0)
- {
- int i;
- for (i = 0; i < group_count; i++) debug_printf(" %d", (int)group_list[i]);
- }
+ for (int i = 0; i < group_count; i++) debug_printf(" %d", (int)group_list[i]);
else if (group_count < 0)
debug_printf(" <error: %s>", strerror(save_errno));
else debug_printf(" <none>");
*/
void
-exim_exit(int rc, const uschar * process)
+exim_exit(int rc)
{
search_tidyup();
+store_exit();
DEBUG(D_any)
- debug_printf(">>>>>>>>>>>>>>>> Exim pid=%d %s%s%sterminating with rc=%d "
- ">>>>>>>>>>>>>>>>\n", (int)getpid(),
- process ? "(" : "", process, process ? ") " : "", rc);
+ debug_printf(">>>>>>>>>>>>>>>> Exim pid=%d (%s) terminating with rc=%d "
+ ">>>>>>>>>>>>>>>>\n",
+ (int)getpid(), process_purpose, rc);
exit(rc);
}
+void
+exim_underbar_exit(int rc)
+{
+store_exit();
+DEBUG(D_any)
+ debug_printf(">>>>>>>>>>>>>>>> Exim pid=%d (%s) terminating with rc=%d "
+ ">>>>>>>>>>>>>>>>\n",
+ (int)getpid(), process_purpose, rc);
+_exit(rc);
+}
+
+
+
+/* Print error string, then die */
+static void
+exim_fail(const char * fmt, ...)
+{
+va_list ap;
+va_start(ap, fmt);
+vfprintf(stderr, fmt, ap);
+exit(EXIT_FAILURE);
+}
+
+/* fail if a length is too long */
+static inline void
+exim_len_fail_toolong(int itemlen, int maxlen, const char *description)
+{
+if (itemlen <= maxlen)
+ return;
+fprintf(stderr, "exim: length limit exceeded (%d > %d) for: %s\n",
+ itemlen, maxlen, description);
+exit(EXIT_FAILURE);
+}
+
+/* only pass through the string item back to the caller if it's short enough */
+static inline const uschar *
+exim_str_fail_toolong(const uschar *item, int maxlen, const char *description)
+{
+exim_len_fail_toolong(Ustrlen(item), maxlen, description);
+return item;
+}
+
+/* exim_chown_failure() called from exim_chown()/exim_fchown() on failure
+of chown()/fchown(). See src/functions.h for more explanation */
+int
+exim_chown_failure(int fd, const uschar *name, uid_t owner, gid_t group)
+{
+int saved_errno = errno; /* from the preceeding chown call */
+#if 1
+log_write(0, LOG_MAIN|LOG_PANIC,
+ __FILE__ ":%d: chown(%s, %d:%d) failed (%s)."
+ " Please contact the authors and refer to https://bugs.exim.org/show_bug.cgi?id=2391",
+ __LINE__, name?name:US"<unknown>", owner, group, strerror(errno));
+#else
+/* I leave this here, commented, in case the "bug"(?) comes up again.
+ It is not an Exim bug, but we can provide a workaround.
+ See Bug 2391
+ HS 2019-04-18 */
+
+struct stat buf;
+
+if (0 == (fd < 0 ? stat(name, &buf) : fstat(fd, &buf)))
+{
+ if (buf.st_uid == owner && buf.st_gid == group) return 0;
+ log_write(0, LOG_MAIN|LOG_PANIC, "Wrong ownership on %s", name);
+}
+else log_write(0, LOG_MAIN|LOG_PANIC, "Stat failed on %s: %s", name, strerror(errno));
+
+#endif
+errno = saved_errno;
+return -1;
+}
/*************************************************
{
int port = host_address_extract_port(address);
if (string_is_ip_address(address, NULL) == 0)
- {
- fprintf(stderr, "exim abandoned: \"%s\" is not an IP address\n", address);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim abandoned: \"%s\" is not an IP address\n", address);
return port;
}
uschar *parse_error = NULL;
uschar *address = parse_extract_address(s, &parse_error, &start, &end, &domain,
FALSE);
-if (address == NULL)
+if (!address)
{
fprintf(stdout, "syntax error: %s\n", parse_error);
*exit_value = 2;
int rc = verify_address(deliver_make_addr(address,TRUE), stdout, flags, -1,
-1, -1, NULL, NULL, NULL);
if (rc == FAIL) *exit_value = 2;
- else if (rc == DEFER && *exit_value == 0) *exit_value = 1;
+ else if (rc == DEFER && *exit_value == 0) *exit_value = 1;
}
}
* Show supported features *
*************************************************/
-/* This function is called for -bV/--version and for -d to output the optional
-features of the current Exim binary.
-
-Arguments: a FILE for printing
-Returns: nothing
-*/
-
static void
-show_whats_supported(FILE *f)
+show_string(BOOL is_stdout, gstring * g)
{
- auth_info *authi;
+const uschar * s = string_from_gstring(g);
+if (s)
+ if (is_stdout) fputs(CCS s, stdout);
+ else debug_printf("%s", s);
+}
+
+static gstring *
+show_db_version(gstring * g)
+{
#ifdef DB_VERSION_STRING
-fprintf(f, "Berkeley DB: %s\n", DB_VERSION_STRING);
+DEBUG(D_any)
+ {
+ g = string_fmt_append(g, "Library version: BDB: Compile: %s\n", DB_VERSION_STRING);
+ g = string_fmt_append(g, " Runtime: %s\n",
+ db_version(NULL, NULL, NULL));
+ }
+else
+ g = string_fmt_append(g, "Berkeley DB: %s\n", DB_VERSION_STRING);
+
#elif defined(BTREEVERSION) && defined(HASHVERSION)
- #ifdef USE_DB
- fprintf(f, "Probably Berkeley DB version 1.8x (native mode)\n");
- #else
- fprintf(f, "Probably Berkeley DB version 1.8x (compatibility mode)\n");
- #endif
+# ifdef USE_DB
+ g = string_cat(g, US"Probably Berkeley DB version 1.8x (native mode)\n");
+# else
+ g = string_cat(g, US"Probably Berkeley DB version 1.8x (compatibility mode)\n");
+# endif
+
#elif defined(_DBM_RDONLY) || defined(dbm_dirfno)
-fprintf(f, "Probably ndbm\n");
+g = string_cat(g, US"Probably ndbm\n");
#elif defined(USE_TDB)
-fprintf(f, "Using tdb\n");
+g = string_cat(g, US"Using tdb\n");
#else
- #ifdef USE_GDBM
- fprintf(f, "Probably GDBM (native mode)\n");
- #else
- fprintf(f, "Probably GDBM (compatibility mode)\n");
- #endif
+# ifdef USE_GDBM
+ g = string_cat(g, US"Probably GDBM (native mode)\n");
+# else
+ g = string_cat(g, US"Probably GDBM (compatibility mode)\n");
+# endif
#endif
+return g;
+}
+
+
+/* This function is called for -bV/--version and for -d to output the optional
+features of the current Exim binary.
+
+Arguments: BOOL, true for stdout else debug channel
+Returns: nothing
+*/
+
+static void
+show_whats_supported(BOOL is_stdout)
+{
+rmark reset_point = store_mark();
+gstring * g = NULL;
-fprintf(f, "Support for:");
+DEBUG(D_any) {} else g = show_db_version(g);
+
+g = string_cat(g, US"Support for:");
#ifdef SUPPORT_CRYPTEQ
- fprintf(f, " crypteq");
+ g = string_cat(g, US" crypteq");
#endif
#if HAVE_ICONV
- fprintf(f, " iconv()");
+ g = string_cat(g, US" iconv()");
#endif
#if HAVE_IPV6
- fprintf(f, " IPv6");
+ g = string_cat(g, US" IPv6");
#endif
#ifdef HAVE_SETCLASSRESOURCES
- fprintf(f, " use_setclassresources");
+ g = string_cat(g, US" use_setclassresources");
#endif
#ifdef SUPPORT_PAM
- fprintf(f, " PAM");
+ g = string_cat(g, US" PAM");
#endif
#ifdef EXIM_PERL
- fprintf(f, " Perl");
+ g = string_cat(g, US" Perl");
#endif
#ifdef EXPAND_DLFUNC
- fprintf(f, " Expand_dlfunc");
+ g = string_cat(g, US" Expand_dlfunc");
#endif
#ifdef USE_TCP_WRAPPERS
- fprintf(f, " TCPwrappers");
+ g = string_cat(g, US" TCPwrappers");
+#endif
+#ifdef USE_GNUTLS
+ g = string_cat(g, US" GnuTLS");
+#endif
+#ifdef USE_OPENSSL
+ g = string_cat(g, US" OpenSSL");
#endif
-#ifdef SUPPORT_TLS
- #ifdef USE_GNUTLS
- fprintf(f, " GnuTLS");
- #else
- fprintf(f, " OpenSSL");
- #endif
+#ifndef DISABLE_TLS_RESUME
+ g = string_cat(g, US" TLS_resume");
#endif
#ifdef SUPPORT_TRANSLATE_IP_ADDRESS
- fprintf(f, " translate_ip_address");
+ g = string_cat(g, US" translate_ip_address");
#endif
#ifdef SUPPORT_MOVE_FROZEN_MESSAGES
- fprintf(f, " move_frozen_messages");
+ g = string_cat(g, US" move_frozen_messages");
#endif
#ifdef WITH_CONTENT_SCAN
- fprintf(f, " Content_Scanning");
+ g = string_cat(g, US" Content_Scanning");
+#endif
+#ifdef SUPPORT_DANE
+ g = string_cat(g, US" DANE");
#endif
#ifndef DISABLE_DKIM
- fprintf(f, " DKIM");
+ g = string_cat(g, US" DKIM");
+#endif
+#ifdef SUPPORT_DMARC
+ g = string_cat(g, US" DMARC");
#endif
#ifndef DISABLE_DNSSEC
- fprintf(f, " DNSSEC");
+ g = string_cat(g, US" DNSSEC");
#endif
#ifndef DISABLE_EVENT
- fprintf(f, " Event");
+ g = string_cat(g, US" Event");
#endif
#ifdef SUPPORT_I18N
- fprintf(f, " I18N");
+ g = string_cat(g, US" I18N");
#endif
#ifndef DISABLE_OCSP
- fprintf(f, " OCSP");
+ g = string_cat(g, US" OCSP");
+#endif
+#ifndef DISABLE_PIPE_CONNECT
+ g = string_cat(g, US" PIPECONNECT");
#endif
#ifndef DISABLE_PRDR
- fprintf(f, " PRDR");
+ g = string_cat(g, US" PRDR");
#endif
#ifdef SUPPORT_PROXY
- fprintf(f, " PROXY");
+ g = string_cat(g, US" PROXY");
#endif
-#ifdef SUPPORT_SOCKS
- fprintf(f, " SOCKS");
+#ifndef DISABLE_QUEUE_RAMP
+ g = string_cat(g, US" Queue_Ramp");
#endif
-#ifdef TCP_FASTOPEN
- deliver_init();
- if (tcp_fastopen_ok) fprintf(f, " TCP_Fast_Open");
+#ifdef SUPPORT_SOCKS
+ g = string_cat(g, US" SOCKS");
#endif
-#ifdef EXPERIMENTAL_LMDB
- fprintf(f, " Experimental_LMDB");
+#ifdef SUPPORT_SPF
+ g = string_cat(g, US" SPF");
#endif
-#ifdef EXPERIMENTAL_QUEUEFILE
- fprintf(f, " Experimental_QUEUEFILE");
+#if defined(SUPPORT_SRS)
+ g = string_cat(g, US" SRS");
#endif
-#ifdef EXPERIMENTAL_SPF
- fprintf(f, " Experimental_SPF");
+#ifdef TCP_FASTOPEN
+ tcp_init();
+ if (f.tcp_fastopen_ok) g = string_cat(g, US" TCP_Fast_Open");
#endif
-#ifdef EXPERIMENTAL_SRS
- fprintf(f, " Experimental_SRS");
+#ifdef EXPERIMENTAL_ARC
+ g = string_cat(g, US" Experimental_ARC");
#endif
#ifdef EXPERIMENTAL_BRIGHTMAIL
- fprintf(f, " Experimental_Brightmail");
-#endif
-#ifdef EXPERIMENTAL_DANE
- fprintf(f, " Experimental_DANE");
+ g = string_cat(g, US" Experimental_Brightmail");
#endif
#ifdef EXPERIMENTAL_DCC
- fprintf(f, " Experimental_DCC");
-#endif
-#ifdef EXPERIMENTAL_DMARC
- fprintf(f, " Experimental_DMARC");
+ g = string_cat(g, US" Experimental_DCC");
#endif
#ifdef EXPERIMENTAL_DSN_INFO
- fprintf(f, " Experimental_DSN_info");
+ g = string_cat(g, US" Experimental_DSN_info");
#endif
-fprintf(f, "\n");
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ g = string_cat(g, US" Experimental_ESMTP_Limits");
+#endif
+#ifdef EXPERIMENTAL_QUEUEFILE
+ g = string_cat(g, US" Experimental_QUEUEFILE");
+#endif
+g = string_cat(g, US"\n");
-fprintf(f, "Lookups (built-in):");
+g = string_cat(g, US"Lookups (built-in):");
#if defined(LOOKUP_LSEARCH) && LOOKUP_LSEARCH!=2
- fprintf(f, " lsearch wildlsearch nwildlsearch iplsearch");
+ g = string_cat(g, US" lsearch wildlsearch nwildlsearch iplsearch");
#endif
#if defined(LOOKUP_CDB) && LOOKUP_CDB!=2
- fprintf(f, " cdb");
+ g = string_cat(g, US" cdb");
#endif
#if defined(LOOKUP_DBM) && LOOKUP_DBM!=2
- fprintf(f, " dbm dbmjz dbmnz");
+ g = string_cat(g, US" dbm dbmjz dbmnz");
#endif
#if defined(LOOKUP_DNSDB) && LOOKUP_DNSDB!=2
- fprintf(f, " dnsdb");
+ g = string_cat(g, US" dnsdb");
#endif
#if defined(LOOKUP_DSEARCH) && LOOKUP_DSEARCH!=2
- fprintf(f, " dsearch");
+ g = string_cat(g, US" dsearch");
#endif
#if defined(LOOKUP_IBASE) && LOOKUP_IBASE!=2
- fprintf(f, " ibase");
+ g = string_cat(g, US" ibase");
+#endif
+#if defined(LOOKUP_JSON) && LOOKUP_JSON!=2
+ g = string_cat(g, US" json");
#endif
#if defined(LOOKUP_LDAP) && LOOKUP_LDAP!=2
- fprintf(f, " ldap ldapdn ldapm");
+ g = string_cat(g, US" ldap ldapdn ldapm");
#endif
-#ifdef EXPERIMENTAL_LMDB
- fprintf(f, " lmdb");
+#ifdef LOOKUP_LMDB
+ g = string_cat(g, US" lmdb");
#endif
#if defined(LOOKUP_MYSQL) && LOOKUP_MYSQL!=2
- fprintf(f, " mysql");
+ g = string_cat(g, US" mysql");
#endif
#if defined(LOOKUP_NIS) && LOOKUP_NIS!=2
- fprintf(f, " nis nis0");
+ g = string_cat(g, US" nis nis0");
#endif
#if defined(LOOKUP_NISPLUS) && LOOKUP_NISPLUS!=2
- fprintf(f, " nisplus");
+ g = string_cat(g, US" nisplus");
#endif
#if defined(LOOKUP_ORACLE) && LOOKUP_ORACLE!=2
- fprintf(f, " oracle");
+ g = string_cat(g, US" oracle");
#endif
#if defined(LOOKUP_PASSWD) && LOOKUP_PASSWD!=2
- fprintf(f, " passwd");
+ g = string_cat(g, US" passwd");
#endif
#if defined(LOOKUP_PGSQL) && LOOKUP_PGSQL!=2
- fprintf(f, " pgsql");
+ g = string_cat(g, US" pgsql");
#endif
#if defined(LOOKUP_REDIS) && LOOKUP_REDIS!=2
- fprintf(f, " redis");
+ g = string_cat(g, US" redis");
#endif
#if defined(LOOKUP_SQLITE) && LOOKUP_SQLITE!=2
- fprintf(f, " sqlite");
+ g = string_cat(g, US" sqlite");
#endif
#if defined(LOOKUP_TESTDB) && LOOKUP_TESTDB!=2
- fprintf(f, " testdb");
+ g = string_cat(g, US" testdb");
#endif
#if defined(LOOKUP_WHOSON) && LOOKUP_WHOSON!=2
- fprintf(f, " whoson");
+ g = string_cat(g, US" whoson");
#endif
-fprintf(f, "\n");
+g = string_cat(g, US"\n");
-fprintf(f, "Authenticators:");
-#ifdef AUTH_CRAM_MD5
- fprintf(f, " cram_md5");
-#endif
-#ifdef AUTH_CYRUS_SASL
- fprintf(f, " cyrus_sasl");
-#endif
-#ifdef AUTH_DOVECOT
- fprintf(f, " dovecot");
-#endif
-#ifdef AUTH_GSASL
- fprintf(f, " gsasl");
-#endif
-#ifdef AUTH_HEIMDAL_GSSAPI
- fprintf(f, " heimdal_gssapi");
-#endif
-#ifdef AUTH_PLAINTEXT
- fprintf(f, " plaintext");
-#endif
-#ifdef AUTH_SPA
- fprintf(f, " spa");
-#endif
-#ifdef AUTH_TLS
- fprintf(f, " tls");
-#endif
-fprintf(f, "\n");
+g = auth_show_supported(g);
+g = route_show_supported(g);
+g = transport_show_supported(g);
-fprintf(f, "Routers:");
-#ifdef ROUTER_ACCEPT
- fprintf(f, " accept");
-#endif
-#ifdef ROUTER_DNSLOOKUP
- fprintf(f, " dnslookup");
-#endif
-#ifdef ROUTER_IPLITERAL
- fprintf(f, " ipliteral");
-#endif
-#ifdef ROUTER_IPLOOKUP
- fprintf(f, " iplookup");
-#endif
-#ifdef ROUTER_MANUALROUTE
- fprintf(f, " manualroute");
-#endif
-#ifdef ROUTER_QUERYPROGRAM
- fprintf(f, " queryprogram");
-#endif
-#ifdef ROUTER_REDIRECT
- fprintf(f, " redirect");
-#endif
-fprintf(f, "\n");
-
-fprintf(f, "Transports:");
-#ifdef TRANSPORT_APPENDFILE
- fprintf(f, " appendfile");
- #ifdef SUPPORT_MAILDIR
- fprintf(f, "/maildir");
- #endif
- #ifdef SUPPORT_MAILSTORE
- fprintf(f, "/mailstore");
- #endif
- #ifdef SUPPORT_MBX
- fprintf(f, "/mbx");
- #endif
-#endif
-#ifdef TRANSPORT_AUTOREPLY
- fprintf(f, " autoreply");
-#endif
-#ifdef TRANSPORT_LMTP
- fprintf(f, " lmtp");
-#endif
-#ifdef TRANSPORT_PIPE
- fprintf(f, " pipe");
-#endif
-#ifdef EXPERIMENTAL_QUEUEFILE
- fprintf(f, " queuefile");
-#endif
-#ifdef TRANSPORT_SMTP
- fprintf(f, " smtp");
+#ifdef WITH_CONTENT_SCAN
+g = malware_show_supported(g);
#endif
-fprintf(f, "\n");
+show_string(is_stdout, g); g = NULL;
if (fixed_never_users[0] > 0)
{
int i;
- fprintf(f, "Fixed never_users: ");
+ g = string_cat(g, US"Fixed never_users: ");
for (i = 1; i <= (int)fixed_never_users[0] - 1; i++)
- fprintf(f, "%d:", (unsigned int)fixed_never_users[i]);
- fprintf(f, "%d\n", (unsigned int)fixed_never_users[i]);
+ string_fmt_append(g, "%u:", (unsigned)fixed_never_users[i]);
+ g = string_fmt_append(g, "%u\n", (unsigned)fixed_never_users[i]);
}
-fprintf(f, "Configure owner: %d:%d\n", config_uid, config_gid);
+g = string_fmt_append(g, "Configure owner: %d:%d\n", config_uid, config_gid);
-fprintf(f, "Size of off_t: " SIZE_T_FMT "\n", sizeof(off_t));
+g = string_fmt_append(g, "Size of off_t: " SIZE_T_FMT "\n", sizeof(off_t));
/* Everything else is details which are only worth reporting when debugging.
Perhaps the tls_version_report should move into this too. */
-DEBUG(D_any) do {
-
- int i;
+DEBUG(D_any)
+ {
/* clang defines __GNUC__ (at least, for me) so test for it first */
#if defined(__clang__)
- fprintf(f, "Compiler: CLang [%s]\n", __clang_version__);
+ g = string_fmt_append(g, "Compiler: CLang [%s]\n", __clang_version__);
#elif defined(__GNUC__)
- fprintf(f, "Compiler: GCC [%s]\n",
+ g = string_fmt_append(g, "Compiler: GCC [%s]\n",
# ifdef __VERSION__
__VERSION__
# else
# endif
);
#else
- fprintf(f, "Compiler: <unknown>\n");
+ g = string_cat(g, US"Compiler: <unknown>\n");
#endif
#if defined(__GLIBC__) && !defined(__UCLIBC__)
- fprintf(f, "Library version: Glibc: Compile: %d.%d\n",
+ g = string_fmt_append(g, "Library version: Glibc: Compile: %d.%d\n",
__GLIBC__, __GLIBC_MINOR__);
if (__GLIBC_PREREQ(2, 1))
- fprintf(f, " Runtime: %s\n",
+ g = string_fmt_append(g, " Runtime: %s\n",
gnu_get_libc_version());
#endif
-#ifdef SUPPORT_TLS
- tls_version_report(f);
+g = show_db_version(g);
+
+#ifndef DISABLE_TLS
+ g = tls_version_report(g);
#endif
#ifdef SUPPORT_I18N
- utf8_version_report(f);
+ g = utf8_version_report(g);
+#endif
+#ifdef SUPPORT_DMARC
+ g = dmarc_version_report(g);
#endif
+#ifdef SUPPORT_SPF
+ g = spf_lib_version_report(g);
+#endif
+
+show_string(is_stdout, g);
+g = NULL;
- for (authi = auths_available; *authi->driver_name != '\0'; ++authi)
- if (authi->version_report)
- (*authi->version_report)(f);
+for (auth_info * authi = auths_available; *authi->driver_name != '\0'; ++authi)
+ if (authi->version_report)
+ g = (*authi->version_report)(g);
/* PCRE_PRERELEASE is either defined and empty or a bare sequence of
characters; unless it's an ancient version of PCRE in which case it
#endif
#define QUOTE(X) #X
#define EXPAND_AND_QUOTE(X) QUOTE(X)
- fprintf(f, "Library version: PCRE: Compile: %d.%d%s\n"
- " Runtime: %s\n",
- PCRE_MAJOR, PCRE_MINOR,
- EXPAND_AND_QUOTE(PCRE_PRERELEASE) "",
- pcre_version());
+ {
+ uschar buf[24];
+ pcre2_config(PCRE2_CONFIG_VERSION, buf);
+ g = string_fmt_append(g, "Library version: PCRE2: Compile: %d.%d%s\n"
+ " Runtime: %s\n",
+ PCRE2_MAJOR, PCRE2_MINOR,
+ EXPAND_AND_QUOTE(PCRE2_PRERELEASE) "",
+ buf);
+ }
#undef QUOTE
#undef EXPAND_AND_QUOTE
- init_lookup_list();
- for (i = 0; i < lookup_list_count; i++)
- if (lookup_list[i]->version_report)
- lookup_list[i]->version_report(f);
+show_string(is_stdout, g);
+g = NULL;
+
+init_lookup_list();
+for (int i = 0; i < lookup_list_count; i++)
+ if (lookup_list[i]->version_report)
+ g = lookup_list[i]->version_report(g);
+show_string(is_stdout, g);
+g = NULL;
#ifdef WHITELIST_D_MACROS
- fprintf(f, "WHITELIST_D_MACROS: \"%s\"\n", WHITELIST_D_MACROS);
+ g = string_fmt_append(g, "WHITELIST_D_MACROS: \"%s\"\n", WHITELIST_D_MACROS);
#else
- fprintf(f, "WHITELIST_D_MACROS unset\n");
+ g = string_cat(g, US"WHITELIST_D_MACROS unset\n");
#endif
#ifdef TRUSTED_CONFIG_LIST
- fprintf(f, "TRUSTED_CONFIG_LIST: \"%s\"\n", TRUSTED_CONFIG_LIST);
+ g = string_fmt_append(g, "TRUSTED_CONFIG_LIST: \"%s\"\n", TRUSTED_CONFIG_LIST);
#else
- fprintf(f, "TRUSTED_CONFIG_LIST unset\n");
+ g = string_cat(g, US"TRUSTED_CONFIG_LIST unset\n");
#endif
+ }
-} while (0);
+show_string(is_stdout, g);
+store_reset(reset_point);
}
static void
show_exim_information(enum commandline_info request, FILE *stream)
{
-const uschar **pp;
-
switch(request)
{
case CMDINFO_NONE:
"If the string is not recognised, you'll get this help (on stderr).\n"
"\n"
" exim -bI:help this information\n"
-" exim -bI:dscp dscp value keywords known\n"
-" exim -bI:sieve list of supported sieve extensions, one per line.\n"
+" exim -bI:dscp list of known dscp value keywords\n"
+" exim -bI:sieve list of supported sieve extensions\n"
);
return;
case CMDINFO_SIEVE:
- for (pp = exim_sieve_extension_list; *pp; ++pp)
+ for (const uschar ** pp = exim_sieve_extension_list; *pp; ++pp)
fprintf(stream, "%s\n", *pp);
return;
case CMDINFO_DSCP:
{
BOOL needs_quote = FALSE;
gstring * g;
-uschar *t;
-for (t = lpart; !needs_quote && *t != 0; t++)
+for (uschar * t = lpart; !needs_quote && *t != 0; t++)
{
needs_quote = !isalnum(*t) && strchr("!#$%&'*+-/=?^_`{|}~", *t) == NULL &&
(*t != '.' || t == lpart || t[1] == 0);
void *dlhandle_curses = dlopen("libcurses." DYNLIB_FN_EXT, RTLD_GLOBAL|RTLD_LAZY);
dlhandle = dlopen("libreadline." DYNLIB_FN_EXT, RTLD_GLOBAL|RTLD_NOW);
-if (dlhandle_curses != NULL) dlclose(dlhandle_curses);
+if (dlhandle_curses) dlclose(dlhandle_curses);
-if (dlhandle != NULL)
+if (dlhandle)
{
/* Checked manual pages; at least in GNU Readline 6.1, the prototypes are:
* char * readline (const char *prompt);
*fn_addhist_ptr = (void(*)(const char*))dlsym(dlhandle, "add_history");
}
else
- {
DEBUG(D_any) debug_printf("failed to load readline: %s\n", dlerror());
- }
return dlhandle;
}
static uschar *
get_stdinput(char *(*fn_readline)(const char *), void(*fn_addhist)(const char *))
{
-int i;
gstring * g = NULL;
+BOOL had_input = FALSE;
if (!fn_readline) { printf("> "); fflush(stdout); }
-for (i = 0;; i++)
+for (int i = 0;; i++)
{
uschar buffer[1024];
- uschar *p, *ss;
+ uschar * p, * ss;
- #ifdef USE_READLINE
+#ifdef USE_READLINE
char *readline_line = NULL;
- if (fn_readline != NULL)
+ if (fn_readline)
{
- if ((readline_line = fn_readline((i > 0)? "":"> ")) == NULL) break;
- if (*readline_line != 0 && fn_addhist != NULL) fn_addhist(readline_line);
+ if (!(readline_line = fn_readline((i > 0)? "":"> "))) break;
+ if (*readline_line && fn_addhist) fn_addhist(readline_line);
p = US readline_line;
}
else
- #endif
+#endif
/* readline() not in use */
{
- if (Ufgets(buffer, sizeof(buffer), stdin) == NULL) break;
+ if (Ufgets(buffer, sizeof(buffer), stdin) == NULL) break; /*EOF*/
p = buffer;
}
/* Handle the line */
- ss = p + (int)Ustrlen(p);
- while (ss > p && isspace(ss[-1])) ss--;
+ had_input = TRUE;
+ ss = p + Ustrlen(p);
+ while (ss > p && isspace(ss[-1])) ss--; /* strip trailing newline (and spaces) */
if (i > 0)
- {
- while (p < ss && isspace(*p)) p++; /* leading space after cont */
- }
+ while (p < ss && isspace(*p)) p++; /* strip leading space after cont */
g = string_catn(g, p, ss - p);
- #ifdef USE_READLINE
+#ifdef USE_READLINE
if (fn_readline) free(readline_line);
- #endif
+#endif
/* g can only be NULL if ss==p */
- if (ss == p || g->s[g->ptr-1] != '\\')
+ if (ss == p || g->s[g->ptr-1] != '\\') /* not continuation; done */
break;
- --g->ptr;
- (void) string_from_gstring(g);
+ --g->ptr; /* drop the \ */
}
-if (!g) printf("\n");
-return string_from_gstring(g);
+if (had_input) return g ? string_from_gstring(g) : US"";
+printf("\n");
+return NULL;
}
/* Handle specific program invocation variants */
if (Ustrcmp(progname, US"-mailq") == 0)
- {
- fprintf(stderr,
+ exim_fail(
"mailq - list the contents of the mail queue\n\n"
"For a list of options, see the Exim documentation.\n");
- exit(EXIT_FAILURE);
- }
/* Generic usage - we output this whatever happens */
-fprintf(stderr,
+exim_fail(
"Exim is a Mail Transfer Agent. It is normally called by Mail User Agents,\n"
"not directly from a shell command line. Options and/or arguments control\n"
"what it does when called. For a list of options, see the Exim documentation.\n");
-
-exit(EXIT_FAILURE);
}
macros_trusted(BOOL opt_D_used)
{
#ifdef WHITELIST_D_MACROS
-macro_item *m;
-uschar *whitelisted, *end, *p, **whites, **w;
+uschar *whitelisted, *end, *p, **whites;
int white_count, i, n;
size_t len;
BOOL prev_char_item, found;
}
/* Get a list of macros which are whitelisted */
-whitelisted = string_copy_malloc(US WHITELIST_D_MACROS);
+whitelisted = string_copy_perm(US WHITELIST_D_MACROS, FALSE);
prev_char_item = FALSE;
white_count = 0;
for (p = whitelisted; *p != '\0'; ++p)
/* The list of commandline macros should be very short.
Accept the N*M complexity. */
-for (m = macros; m; m = m->next) if (m->command_line)
+for (macro_item * m = macros_user; m; m = m->next) if (m->command_line)
{
found = FALSE;
- for (w = whites; *w; ++w)
+ for (uschar ** w = whites; *w; ++w)
if (Ustrcmp(*w, m->name) == 0)
{
found = TRUE;
continue;
if ((len = m->replen) == 0)
continue;
- n = pcre_exec(regex_whitelisted_macro, NULL, CS m->replacement, len,
- 0, PCRE_EOPT, NULL, 0);
- if (n < 0)
- {
- if (n != PCRE_ERROR_NOMATCH)
- debug_printf("macros_trusted checking %s returned %d\n", m->name, n);
+ if (!regex_match(regex_whitelisted_macro, m->replacement, len, NULL))
return FALSE;
- }
}
DEBUG(D_any) debug_printf("macros_trusted overridden to true by whitelisting\n");
return TRUE;
}
+/*************************************************
+* Expansion testing *
+*************************************************/
+
+/* Expand and print one item, doing macro-processing.
+
+Arguments:
+ item line for expansion
+*/
+
+static void
+expansion_test_line(const uschar * line)
+{
+int len;
+BOOL dummy_macexp;
+uschar * s;
+
+Ustrncpy(big_buffer, line, big_buffer_size);
+big_buffer[big_buffer_size-1] = '\0';
+len = Ustrlen(big_buffer);
+
+(void) macros_expand(0, &len, &dummy_macexp);
+
+if (isupper(big_buffer[0]))
+ {
+ if (macro_read_assignment(big_buffer))
+ printf("Defined macro '%s'\n", mlast->name);
+ }
+else if (Ustrncmp(big_buffer, "set ", 4) == 0)
+ printf("%s\n", acl_standalone_setvar(big_buffer+4));
+else
+ if ((s = expand_string(big_buffer))) printf("%s\n", CS s);
+ else printf("Failed: %s\n", expand_string_message);
+}
+
+
+
/*************************************************
* Entry point and high-level code *
*************************************************/
int list_queue_option = 0;
int msg_action = 0;
int msg_action_arg = -1;
-int namelen = (argv[0] == NULL)? 0 : Ustrlen(argv[0]);
+int namelen = argv[0] ? Ustrlen(argv[0]) : 0;
int queue_only_reason = 0;
#ifdef EXIM_PERL
int perl_start_option = 0;
int sender_address_domain = 0;
int test_retry_arg = -1;
int test_rewrite_arg = -1;
+gid_t original_egid;
BOOL arg_queue_only = FALSE;
BOOL bi_option = FALSE;
BOOL checking = FALSE;
BOOL list_options = FALSE;
BOOL list_config = FALSE;
BOOL local_queue_only;
-BOOL more = TRUE;
BOOL one_msg_action = FALSE;
BOOL opt_D_used = FALSE;
BOOL queue_only_set = FALSE;
BOOL usage_wanted = FALSE;
BOOL verify_address_mode = FALSE;
BOOL verify_as_sender = FALSE;
+BOOL rcpt_verify_quota = FALSE;
BOOL version_printed = FALSE;
uschar *alias_arg = NULL;
uschar *called_as = US"";
uschar *start_queue_run_id = NULL;
uschar *stop_queue_run_id = NULL;
uschar *expansion_test_message = NULL;
-uschar *ftest_domain = NULL;
-uschar *ftest_localpart = NULL;
-uschar *ftest_prefix = NULL;
-uschar *ftest_suffix = NULL;
+const uschar *ftest_domain = NULL;
+const uschar *ftest_localpart = NULL;
+const uschar *ftest_prefix = NULL;
+const uschar *ftest_suffix = NULL;
uschar *log_oneline = NULL;
uschar *malware_test_file = NULL;
uschar *real_sender_address;
uschar *originator_home = US"/";
size_t sz;
-void *reset_point;
struct passwd *pw;
struct stat statbuf;
pid_t passed_qr_pid = (pid_t)0;
int passed_qr_pipe = -1;
-gid_t group_list[NGROUPS_MAX];
+gid_t group_list[EXIM_GROUPLIST_SIZE];
/* For the -bI: flag */
enum commandline_info info_flag = CMDINFO_NONE;
extern char **environ;
-/* If the Exim user and/or group and/or the configuration file owner/group were
+#ifdef MEASURE_TIMING
+(void)gettimeofday(×tamp_startup, NULL);
+#endif
+
+store_init(); /* Initialise the memory allocation susbsystem */
+pcre_init(); /* Set up memory handling for pcre */
+
+/* If the Exim user and/or group and/or the configuration file owner/group were
defined by ref:name at build time, we must now find the actual uid/gid values.
This is a feature to make the lives of binary distributors easier. */
if (route_finduser(US EXIM_USERNAME, &pw, &exim_uid))
{
if (exim_uid == 0)
- {
- fprintf(stderr, "exim: refusing to run with uid 0 for \"%s\"\n",
- EXIM_USERNAME);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: refusing to run with uid 0 for \"%s\"\n", EXIM_USERNAME);
+
/* If ref:name uses a number as the name, route_finduser() returns
TRUE with exim_uid set and pw coerced to NULL. */
if (pw)
exim_gid = pw->pw_gid;
#ifndef EXIM_GROUPNAME
else
- {
- fprintf(stderr,
+ exim_fail(
"exim: ref:name should specify a usercode, not a group.\n"
"exim: can't let you get away with it unless you also specify a group.\n");
- exit(EXIT_FAILURE);
- }
#endif
}
else
- {
- fprintf(stderr, "exim: failed to find uid for user name \"%s\"\n",
- EXIM_USERNAME);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: failed to find uid for user name \"%s\"\n", EXIM_USERNAME);
#endif
#ifdef EXIM_GROUPNAME
if (!route_findgroup(US EXIM_GROUPNAME, &exim_gid))
- {
- fprintf(stderr, "exim: failed to find gid for group name \"%s\"\n",
- EXIM_GROUPNAME);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: failed to find gid for group name \"%s\"\n", EXIM_GROUPNAME);
#endif
#ifdef CONFIGURE_OWNERNAME
if (!route_finduser(US CONFIGURE_OWNERNAME, NULL, &config_uid))
- {
- fprintf(stderr, "exim: failed to find uid for user name \"%s\"\n",
+ exim_fail("exim: failed to find uid for user name \"%s\"\n",
CONFIGURE_OWNERNAME);
- exit(EXIT_FAILURE);
- }
#endif
/* We default the system_filter_user to be the Exim run-time user, as a
#ifdef CONFIGURE_GROUPNAME
if (!route_findgroup(US CONFIGURE_GROUPNAME, &config_gid))
- {
- fprintf(stderr, "exim: failed to find gid for group name \"%s\"\n",
+ exim_fail("exim: failed to find gid for group name \"%s\"\n",
CONFIGURE_GROUPNAME);
- exit(EXIT_FAILURE);
- }
#endif
/* In the Cygwin environment, some initialization used to need doing.
/* Check a field which is patched when we are running Exim within its
testing harness; do a fast initial check, and then the whole thing. */
-running_in_test_harness =
+f.running_in_test_harness =
*running_status == '<' && Ustrcmp(running_status, "<<<testing>>>") == 0;
+if (f.running_in_test_harness)
+ debug_store = TRUE;
+
+/* Protect against abusive argv[0] */
+if (!argv[0] || !argc) exim_fail("exim: executable name required\n");
+exim_str_fail_toolong(argv[0], PATH_MAX, "argv[0]");
/* The C standard says that the equivalent of setlocale(LC_ALL, "C") is obeyed
at the start of a program; however, it seems that some environments do not
setlocale(LC_ALL, "C");
+/* Get the offset between CLOCK_MONOTONIC/CLOCK_BOOTTIME and wallclock */
+
+#ifdef _POSIX_MONOTONIC_CLOCK
+exim_clock_init();
+#endif
+
/* Set up the default handler for timing using alarm(). */
os_non_restarting_signal(SIGALRM, sigalrm_handler);
because store_malloc writes a log entry on failure. */
if (!(log_buffer = US malloc(LOG_BUFFER_SIZE)))
- {
- fprintf(stderr, "exim: failed to get store for log buffer\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: failed to get store for log buffer\n");
/* Initialize the default log options. */
if (fstat(fileno(stderr), &statbuf) >= 0) log_stderr = stderr;
-/* Arrange for the PCRE regex library to use our store functions. Note that
-the normal calls are actually macros that add additional arguments for
-debugging purposes so we have to assign specially constructed functions here.
-The default is to use store in the stacking pool, but this is overridden in the
-regex_must_compile() function. */
-
-pcre_malloc = function_store_get;
-pcre_free = function_dummy_free;
-
/* Ensure there is a big buffer for temporary use in several places. It is put
in malloc store so that it can be freed for enlargement if necessary. */
/* Set up the handler for the data request signal, and set the initial
descriptive text. */
+process_info = store_get(PROCESS_INFO_SIZE, GET_TAINTED);
set_process_info("initializing");
-os_restarting_signal(SIGUSR1, usr1_handler);
+os_restarting_signal(SIGUSR1, usr1_handler); /* exiwhat */
+#ifdef SA_SIGINFO
+ {
+ struct sigaction act = { .sa_sigaction = segv_handler, .sa_flags = SA_RESETHAND | SA_SIGINFO };
+ sigaction(SIGSEGV, &act, NULL);
+ }
+#else
+signal(SIGSEGV, segv_handler); /* log faults */
+#endif
+
+/* If running in a dockerized environment, the TERM signal is only
+delegated to the PID 1 if we request it by setting an signal handler */
+if (getpid() == 1) signal(SIGTERM, term_handler);
/* SIGHUP is used to get the daemon to reconfigure. It gets set as appropriate
in the daemon code. For the rest of Exim's uses, we ignore it. */
using mac_ismsgid, which uses this. */
regex_ismsgid =
- regex_must_compile(US"^(?:[^\\W_]{6}-){2}[^\\W_]{2}$", FALSE, TRUE);
+ regex_must_compile(US"^(?:[^\\W_]{6}-){2}[^\\W_]{2}$", MCS_NOFLAGS, TRUE);
/* Precompile the regular expression that is used for matching an SMTP error
code, possibly extended, at the start of an error message. Note that the
regex_smtp_code =
regex_must_compile(US"^\\d\\d\\d\\s(?:\\d\\.\\d\\d?\\d?\\.\\d\\d?\\d?\\s)?",
- FALSE, TRUE);
+ MCS_NOFLAGS, TRUE);
#ifdef WHITELIST_D_MACROS
/* Precompile the regular expression used to filter the content of macros
given to -D for permissibility. */
regex_whitelisted_macro =
- regex_must_compile(US"^[A-Za-z0-9_/.-]*$", FALSE, TRUE);
+ regex_must_compile(US"^[A-Za-z0-9_/.-]*$", MCS_NOFLAGS, TRUE);
#endif
-for (i = 0; i < REGEX_VARS; i++) regex_vars[i] = NULL;
-
/* If the program is called as "mailq" treat it as equivalent to "exim -bp";
this seems to be a generally accepted convention, since one finds symbolic
links called "mailq" in standard OS configurations. */
if ((namelen == 5 && Ustrcmp(argv[0], "rmail") == 0) ||
(namelen > 5 && Ustrncmp(argv[0] + namelen - 6, "/rmail", 6) == 0))
{
- dot_ends = FALSE;
+ f.dot_ends = FALSE;
called_as = US"-rmail";
errors_sender_rc = EXIT_SUCCESS;
}
normally be root, but in some esoteric environments it may not be. */
original_euid = geteuid();
+original_egid = getegid();
/* Get the real uid and gid. If the caller is root, force the effective uid/gid
to be the same as the real ones. This makes a difference only if Exim is setuid
if (real_uid == root_uid)
{
- rv = setgid(real_gid);
- if (rv)
- {
- fprintf(stderr, "exim: setgid(%ld) failed: %s\n",
+ if ((rv = setgid(real_gid)))
+ exim_fail("exim: setgid(%ld) failed: %s\n",
(long int)real_gid, strerror(errno));
- exit(EXIT_FAILURE);
- }
- rv = setuid(real_uid);
- if (rv)
- {
- fprintf(stderr, "exim: setuid(%ld) failed: %s\n",
+ if ((rv = setuid(real_uid)))
+ exim_fail("exim: setuid(%ld) failed: %s\n",
(long int)real_uid, strerror(errno));
- exit(EXIT_FAILURE);
- }
}
/* If neither the original real uid nor the original euid was root, Exim is
unprivileged = (real_uid != root_uid && original_euid != root_uid);
+/* For most of the args-parsing we need to use permanent pool memory */
+ {
+ int old_pool = store_pool;
+ store_pool = POOL_PERM;
+
/* Scan the program's arguments. Some can be dealt with right away; others are
simply recorded for checking and handling afterwards. Do a high-level switch
on the second character (the one after '-'), to save some effort. */
-for (i = 1; i < argc; i++)
+ for (i = 1; i < argc; i++)
{
BOOL badarg = FALSE;
- uschar *arg = argv[i];
- uschar *argrest;
+ uschar * arg = argv[i];
+ uschar * argrest;
int switchchar;
/* An argument not starting with '-' is the start of a recipients list;
{
switchchar = arg[3];
argrest += 2;
- queue_2stage = TRUE;
+ f.queue_2stage = TRUE;
}
/* Make -r synonymous with -f, since it is a documented alias */
/* sendmail uses -Ac and -Am to control which .cf file is used;
we ignore them. */
case 'A':
- if (*argrest == '\0') { badarg = TRUE; break; }
+ if (!*argrest) { badarg = TRUE; break; }
else
{
BOOL ignore = FALSE;
ignore = TRUE;
break;
}
- if (!ignore) { badarg = TRUE; break; }
+ if (!ignore) badarg = TRUE;
}
break;
so has no need of it. */
case 'B':
- if (*argrest == 0) i++; /* Skip over the type */
+ if (!*argrest) i++; /* Skip over the type */
break;
case 'b':
- receiving_message = FALSE; /* Reset TRUE for -bm, -bS, -bs below */
-
- /* -bd: Run in daemon mode, awaiting SMTP connections.
- -bdf: Ditto, but in the foreground.
- */
-
- if (*argrest == 'd')
- {
- daemon_listen = TRUE;
- if (*(++argrest) == 'f') background_daemon = FALSE;
- else if (*argrest != 0) { badarg = TRUE; break; }
- }
-
- /* -be: Run in expansion test mode
- -bem: Ditto, but read a message from a file first
- */
-
- else if (*argrest == 'e')
{
- expansion_test = checking = TRUE;
- if (argrest[1] == 'm')
- {
- if (++i >= argc) { badarg = TRUE; break; }
- expansion_test_message = argv[i];
- argrest++;
- }
- if (argrest[1] != 0) { badarg = TRUE; break; }
- }
-
- /* -bF: Run system filter test */
-
- else if (*argrest == 'F')
- {
- filter_test |= checking = FTEST_SYSTEM;
- if (*(++argrest) != 0) { badarg = TRUE; break; }
- if (++i < argc) filter_test_sfile = argv[i]; else
- {
- fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]);
- exit(EXIT_FAILURE);
- }
- }
-
- /* -bf: Run user filter test
- -bfd: Set domain for filter testing
- -bfl: Set local part for filter testing
- -bfp: Set prefix for filter testing
- -bfs: Set suffix for filter testing
- */
-
- else if (*argrest == 'f')
- {
- if (*(++argrest) == 0)
- {
- filter_test |= checking = FTEST_USER;
- if (++i < argc) filter_test_ufile = argv[i]; else
- {
- fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]);
- exit(EXIT_FAILURE);
- }
- }
- else
- {
- if (++i >= argc)
- {
- fprintf(stderr, "exim: string expected after %s\n", arg);
- exit(EXIT_FAILURE);
- }
- if (Ustrcmp(argrest, "d") == 0) ftest_domain = argv[i];
- else if (Ustrcmp(argrest, "l") == 0) ftest_localpart = argv[i];
- else if (Ustrcmp(argrest, "p") == 0) ftest_prefix = argv[i];
- else if (Ustrcmp(argrest, "s") == 0) ftest_suffix = argv[i];
- else { badarg = TRUE; break; }
- }
- }
-
- /* -bh: Host checking - an IP address must follow. */
+ receiving_message = FALSE; /* Reset TRUE for -bm, -bS, -bs below */
- else if (Ustrcmp(argrest, "h") == 0 || Ustrcmp(argrest, "hc") == 0)
- {
- if (++i >= argc) { badarg = TRUE; break; }
- sender_host_address = argv[i];
- host_checking = checking = log_testing_mode = TRUE;
- host_checking_callout = argrest[1] == 'c';
- message_logs = FALSE;
- }
-
- /* -bi: This option is used by sendmail to initialize *the* alias file,
- though it has the -oA option to specify a different file. Exim has no
- concept of *the* alias file, but since Sun's YP make script calls
- sendmail this way, some support must be provided. */
-
- else if (Ustrcmp(argrest, "i") == 0) bi_option = TRUE;
-
- /* -bI: provide information, of the type to follow after a colon.
- This is an Exim flag. */
-
- else if (argrest[0] == 'I' && Ustrlen(argrest) >= 2 && argrest[1] == ':')
- {
- uschar *p = &argrest[2];
- info_flag = CMDINFO_HELP;
- if (Ustrlen(p))
- {
- if (strcmpic(p, CUS"sieve") == 0)
- {
- info_flag = CMDINFO_SIEVE;
- info_stdout = TRUE;
- }
- else if (strcmpic(p, CUS"dscp") == 0)
- {
- info_flag = CMDINFO_DSCP;
- info_stdout = TRUE;
- }
- else if (strcmpic(p, CUS"help") == 0)
- {
- info_stdout = TRUE;
- }
- }
- }
-
- /* -bm: Accept and deliver message - the default option. Reinstate
- receiving_message, which got turned off for all -b options. */
-
- else if (Ustrcmp(argrest, "m") == 0) receiving_message = TRUE;
-
- /* -bmalware: test the filename given for malware */
-
- else if (Ustrcmp(argrest, "malware") == 0)
- {
- if (++i >= argc) { badarg = TRUE; break; }
- checking = TRUE;
- malware_test_file = argv[i];
- }
-
- /* -bnq: For locally originating messages, do not qualify unqualified
- addresses. In the envelope, this causes errors; in header lines they
- just get left. */
-
- else if (Ustrcmp(argrest, "nq") == 0)
- {
- allow_unqualified_sender = FALSE;
- allow_unqualified_recipient = FALSE;
- }
-
- /* -bpxx: List the contents of the mail queue, in various forms. If
- the option is -bpc, just a queue count is needed. Otherwise, if the
- first letter after p is r, then order is random. */
-
- else if (*argrest == 'p')
- {
- if (*(++argrest) == 'c')
- {
- count_queue = TRUE;
- if (*(++argrest) != 0) badarg = TRUE;
- break;
- }
-
- if (*argrest == 'r')
- {
- list_queue_option = 8;
- argrest++;
- }
- else list_queue_option = 0;
-
- list_queue = TRUE;
-
- /* -bp: List the contents of the mail queue, top-level only */
-
- if (*argrest == 0) {}
-
- /* -bpu: List the contents of the mail queue, top-level undelivered */
-
- else if (Ustrcmp(argrest, "u") == 0) list_queue_option += 1;
-
- /* -bpa: List the contents of the mail queue, including all delivered */
-
- else if (Ustrcmp(argrest, "a") == 0) list_queue_option += 2;
-
- /* Unknown after -bp[r] */
-
- else
- {
- badarg = TRUE;
- break;
- }
- }
-
-
- /* -bP: List the configuration variables given as the address list.
- Force -v, so configuration errors get displayed. */
-
- else if (Ustrcmp(argrest, "P") == 0)
- {
- /* -bP config: we need to setup here, because later,
- * when list_options is checked, the config is read already */
- if (argv[i+1] && Ustrcmp(argv[i+1], "config") == 0)
- {
- list_config = TRUE;
- readconf_save_config(version_string);
- }
- else
- {
- list_options = TRUE;
- debug_selector |= D_v;
- debug_file = stderr;
- }
- }
-
- /* -brt: Test retry configuration lookup */
-
- else if (Ustrcmp(argrest, "rt") == 0)
- {
- checking = TRUE;
- test_retry_arg = i + 1;
- goto END_ARG;
- }
-
- /* -brw: Test rewrite configuration */
+ switch (*argrest++)
+ {
+ /* -bd: Run in daemon mode, awaiting SMTP connections.
+ -bdf: Ditto, but in the foreground.
+ */
+ case 'd':
+ f.daemon_listen = f.daemon_scion = TRUE;
+ if (*argrest == 'f') f.background_daemon = FALSE;
+ else if (*argrest) badarg = TRUE;
+ break;
+
+ /* -be: Run in expansion test mode
+ -bem: Ditto, but read a message from a file first
+ */
+ case 'e':
+ expansion_test = checking = TRUE;
+ if (*argrest == 'm')
+ {
+ if (++i >= argc) { badarg = TRUE; break; }
+ expansion_test_message = argv[i];
+ argrest++;
+ }
+ if (*argrest) badarg = TRUE;
+ break;
+
+ /* -bF: Run system filter test */
+ case 'F':
+ filter_test |= checking = FTEST_SYSTEM;
+ if (*argrest) badarg = TRUE;
+ else if (++i < argc) filter_test_sfile = argv[i];
+ else exim_fail("exim: file name expected after %s\n", argv[i-1]);
+ break;
+
+ /* -bf: Run user filter test
+ -bfd: Set domain for filter testing
+ -bfl: Set local part for filter testing
+ -bfp: Set prefix for filter testing
+ -bfs: Set suffix for filter testing
+ */
+ case 'f':
+ if (!*argrest)
+ {
+ filter_test |= checking = FTEST_USER;
+ if (++i < argc) filter_test_ufile = argv[i];
+ else exim_fail("exim: file name expected after %s\n", argv[i-1]);
+ }
+ else
+ {
+ if (++i >= argc)
+ exim_fail("exim: string expected after %s\n", arg);
+ if (Ustrcmp(argrest, "d") == 0) ftest_domain = exim_str_fail_toolong(argv[i], EXIM_DOMAINNAME_MAX, "-bfd");
+ else if (Ustrcmp(argrest, "l") == 0) ftest_localpart = exim_str_fail_toolong(argv[i], EXIM_LOCALPART_MAX, "-bfl");
+ else if (Ustrcmp(argrest, "p") == 0) ftest_prefix = exim_str_fail_toolong(argv[i], EXIM_LOCALPART_MAX, "-bfp");
+ else if (Ustrcmp(argrest, "s") == 0) ftest_suffix = exim_str_fail_toolong(argv[i], EXIM_LOCALPART_MAX, "-bfs");
+ else badarg = TRUE;
+ }
+ break;
+
+ /* -bh: Host checking - an IP address must follow. */
+ case 'h':
+ if (!*argrest || Ustrcmp(argrest, "c") == 0)
+ {
+ if (++i >= argc) { badarg = TRUE; break; }
+ sender_host_address = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_IPADDR_MAX, "-bh"),
+ GET_TAINTED);
+ host_checking = checking = f.log_testing_mode = TRUE;
+ f.host_checking_callout = *argrest == 'c';
+ message_logs = FALSE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bi: This option is used by sendmail to initialize *the* alias file,
+ though it has the -oA option to specify a different file. Exim has no
+ concept of *the* alias file, but since Sun's YP make script calls
+ sendmail this way, some support must be provided. */
+ case 'i':
+ if (!*argrest) bi_option = TRUE;
+ else badarg = TRUE;
+ break;
+
+ /* -bI: provide information, of the type to follow after a colon.
+ This is an Exim flag. */
+ case 'I':
+ if (Ustrlen(argrest) >= 1 && *argrest == ':')
+ {
+ uschar *p = argrest+1;
+ info_flag = CMDINFO_HELP;
+ if (Ustrlen(p))
+ if (strcmpic(p, CUS"sieve") == 0)
+ {
+ info_flag = CMDINFO_SIEVE;
+ info_stdout = TRUE;
+ }
+ else if (strcmpic(p, CUS"dscp") == 0)
+ {
+ info_flag = CMDINFO_DSCP;
+ info_stdout = TRUE;
+ }
+ else if (strcmpic(p, CUS"help") == 0)
+ info_stdout = TRUE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bm: Accept and deliver message - the default option. Reinstate
+ receiving_message, which got turned off for all -b options.
+ -bmalware: test the filename given for malware */
+ case 'm':
+ if (!*argrest) receiving_message = TRUE;
+ else if (Ustrcmp(argrest, "alware") == 0)
+ {
+ if (++i >= argc) { badarg = TRUE; break; }
+ checking = TRUE;
+ malware_test_file = argv[i];
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bnq: For locally originating messages, do not qualify unqualified
+ addresses. In the envelope, this causes errors; in header lines they
+ just get left. */
+ case 'n':
+ if (Ustrcmp(argrest, "q") == 0)
+ {
+ f.allow_unqualified_sender = FALSE;
+ f.allow_unqualified_recipient = FALSE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bpxx: List the contents of the mail queue, in various forms. If
+ the option is -bpc, just a queue count is needed. Otherwise, if the
+ first letter after p is r, then order is random. */
+ case 'p':
+ if (*argrest == 'c')
+ {
+ count_queue = TRUE;
+ if (*++argrest) badarg = TRUE;
+ break;
+ }
- else if (Ustrcmp(argrest, "rw") == 0)
- {
- checking = TRUE;
- test_rewrite_arg = i + 1;
- goto END_ARG;
- }
+ if (*argrest == 'r')
+ {
+ list_queue_option = 8;
+ argrest++;
+ }
+ else list_queue_option = 0;
- /* -bS: Read SMTP commands on standard input, but produce no replies -
- all errors are reported by sending messages. */
+ list_queue = TRUE;
- else if (Ustrcmp(argrest, "S") == 0)
- smtp_input = smtp_batched_input = receiving_message = TRUE;
+ /* -bp: List the contents of the mail queue, top-level only */
- /* -bs: Read SMTP commands on standard input and produce SMTP replies
- on standard output. */
+ if (!*argrest) {}
- else if (Ustrcmp(argrest, "s") == 0) smtp_input = receiving_message = TRUE;
+ /* -bpu: List the contents of the mail queue, top-level undelivered */
- /* -bt: address testing mode */
+ else if (Ustrcmp(argrest, "u") == 0) list_queue_option += 1;
- else if (Ustrcmp(argrest, "t") == 0)
- address_test_mode = checking = log_testing_mode = TRUE;
+ /* -bpa: List the contents of the mail queue, including all delivered */
- /* -bv: verify addresses */
+ else if (Ustrcmp(argrest, "a") == 0) list_queue_option += 2;
- else if (Ustrcmp(argrest, "v") == 0)
- verify_address_mode = checking = log_testing_mode = TRUE;
+ /* Unknown after -bp[r] */
- /* -bvs: verify sender addresses */
+ else badarg = TRUE;
+ break;
- else if (Ustrcmp(argrest, "vs") == 0)
- {
- verify_address_mode = checking = log_testing_mode = TRUE;
- verify_as_sender = TRUE;
- }
- /* -bV: Print version string and support details */
+ /* -bP: List the configuration variables given as the address list.
+ Force -v, so configuration errors get displayed. */
+ case 'P':
- else if (Ustrcmp(argrest, "V") == 0)
- {
- printf("Exim version %s #%s built %s\n", version_string,
- version_cnumber, version_date);
- printf("%s\n", CS version_copyright);
- version_printed = TRUE;
- show_whats_supported(stdout);
- log_testing_mode = TRUE;
- }
+ /* -bP config: we need to setup here, because later,
+ when list_options is checked, the config is read already */
+ if (*argrest)
+ badarg = TRUE;
+ else if (argv[i+1] && Ustrcmp(argv[i+1], "config") == 0)
+ {
+ list_config = TRUE;
+ readconf_save_config(version_string);
+ }
+ else
+ {
+ list_options = TRUE;
+ debug_selector |= D_v;
+ debug_file = stderr;
+ }
+ break;
+
+ /* -brt: Test retry configuration lookup */
+ case 'r':
+ if (Ustrcmp(argrest, "t") == 0)
+ {
+ checking = TRUE;
+ test_retry_arg = i + 1;
+ goto END_ARG;
+ }
- /* -bw: inetd wait mode, accept a listening socket as stdin */
+ /* -brw: Test rewrite configuration */
- else if (*argrest == 'w')
- {
- inetd_wait_mode = TRUE;
- background_daemon = FALSE;
- daemon_listen = TRUE;
- if (*(++argrest) != '\0')
- {
- inetd_wait_timeout = readconf_readtime(argrest, 0, FALSE);
- if (inetd_wait_timeout <= 0)
- {
- fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]);
- exit(EXIT_FAILURE);
- }
- }
+ else if (Ustrcmp(argrest, "w") == 0)
+ {
+ checking = TRUE;
+ test_rewrite_arg = i + 1;
+ goto END_ARG;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bS: Read SMTP commands on standard input, but produce no replies -
+ all errors are reported by sending messages. */
+ case 'S':
+ if (!*argrest)
+ smtp_input = smtp_batched_input = receiving_message = TRUE;
+ else badarg = TRUE;
+ break;
+
+ /* -bs: Read SMTP commands on standard input and produce SMTP replies
+ on standard output. */
+ case 's':
+ if (!*argrest) smtp_input = receiving_message = TRUE;
+ else badarg = TRUE;
+ break;
+
+ /* -bt: address testing mode */
+ case 't':
+ if (!*argrest)
+ f.address_test_mode = checking = f.log_testing_mode = TRUE;
+ else badarg = TRUE;
+ break;
+
+ /* -bv: verify addresses */
+ case 'v':
+ if (!*argrest)
+ verify_address_mode = checking = f.log_testing_mode = TRUE;
+
+ /* -bvs: verify sender addresses */
+
+ else if (Ustrcmp(argrest, "s") == 0)
+ {
+ verify_address_mode = checking = f.log_testing_mode = TRUE;
+ verify_as_sender = TRUE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bV: Print version string and support details */
+ case 'V':
+ if (!*argrest)
+ {
+ printf("Exim version %s #%s built %s\n", version_string,
+ version_cnumber, version_date);
+ printf("%s\n", CS version_copyright);
+ version_printed = TRUE;
+ show_whats_supported(TRUE);
+ f.log_testing_mode = TRUE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bw: inetd wait mode, accept a listening socket as stdin */
+ case 'w':
+ f.inetd_wait_mode = TRUE;
+ f.background_daemon = FALSE;
+ f.daemon_listen = f.daemon_scion = TRUE;
+ if (*argrest)
+ if ((inetd_wait_timeout = readconf_readtime(argrest, 0, FALSE)) <= 0)
+ exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
+ break;
+
+ default:
+ badarg = TRUE;
+ break;
+ }
+ break;
}
- else badarg = TRUE;
- break;
-
/* -C: change configuration file list; ignore if it isn't really
a change! Enforce a prefix check if required. */
case 'C':
- if (*argrest == 0)
- {
- if(++i < argc) argrest = argv[i]; else
- { badarg = TRUE; break; }
- }
+ if (!*argrest)
+ if (++i < argc) argrest = argv[i]; else { badarg = TRUE; break; }
if (Ustrcmp(config_main_filelist, argrest) != 0)
{
#ifdef ALT_CONFIG_PREFIX
int len = Ustrlen(ALT_CONFIG_PREFIX);
const uschar *list = argrest;
uschar *filename;
+ /* The argv is untainted, so big_buffer (also untainted) is ok to use */
while((filename = string_nextinlist(&list, &sep, big_buffer,
- big_buffer_size)) != NULL)
- {
- if ((Ustrlen(filename) < len ||
- Ustrncmp(filename, ALT_CONFIG_PREFIX, len) != 0 ||
- Ustrstr(filename, "/../") != NULL) &&
- (Ustrcmp(filename, "/dev/null") != 0 || real_uid != root_uid))
- {
- fprintf(stderr, "-C Permission denied\n");
- exit(EXIT_FAILURE);
- }
- }
+ big_buffer_size)))
+ if ( ( Ustrlen(filename) < len
+ || Ustrncmp(filename, ALT_CONFIG_PREFIX, len) != 0
+ || Ustrstr(filename, "/../") != NULL
+ )
+ && (Ustrcmp(filename, "/dev/null") != 0 || real_uid != root_uid)
+ )
+ exim_fail("-C Permission denied\n");
#endif
if (real_uid != root_uid)
{
&& real_uid != config_uid
#endif
)
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
else
{
FILE *trust_list = Ufopen(TRUSTED_CONFIG_LIST, "rb");
) || /* or */
(statbuf.st_mode & 2) != 0) /* world writeable */
{
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
fclose(trust_list);
}
else
{
/* Well, the trust list at least is up to scratch... */
- void *reset_point = store_get(0);
+ rmark reset_point;
uschar *trusted_configs[32];
int nr_configs = 0;
int i = 0;
+ int old_pool = store_pool;
+ store_pool = POOL_MAIN;
+ reset_point = store_mark();
while (Ufgets(big_buffer, big_buffer_size, trust_list))
{
uschar *start = big_buffer, *nl;
if (nl)
*nl = 0;
trusted_configs[nr_configs++] = string_copy(start);
- if (nr_configs == 32)
+ if (nr_configs == nelem(trusted_configs))
break;
}
fclose(trust_list);
int sep = 0;
const uschar *list = argrest;
uschar *filename;
- while (trusted_config && (filename = string_nextinlist(&list,
- &sep, big_buffer, big_buffer_size)) != NULL)
+ while (f.trusted_config && (filename = string_nextinlist(&list,
+ &sep, big_buffer, big_buffer_size)))
{
for (i=0; i < nr_configs; i++)
- {
if (Ustrcmp(filename, trusted_configs[i]) == 0)
break;
- }
if (i == nr_configs)
{
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
break;
}
}
- store_reset(reset_point);
- }
- else
- {
- /* No valid prefixes found in trust_list file. */
- trusted_config = FALSE;
}
+ else /* No valid prefixes found in trust_list file. */
+ f.trusted_config = FALSE;
+ store_reset(reset_point);
+ store_pool = old_pool;
}
}
- else
- {
- /* Could not open trust_list file. */
- trusted_config = FALSE;
- }
+ else /* Could not open trust_list file. */
+ f.trusted_config = FALSE;
}
#else
/* Not root; don't trust config */
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
#endif
}
config_main_filelist = argrest;
- config_changed = TRUE;
+ f.config_changed = TRUE;
}
break;
/* -D: set up a macro definition */
case 'D':
- #ifdef DISABLE_D_OPTION
- fprintf(stderr, "exim: -D is not available in this Exim binary\n");
- exit(EXIT_FAILURE);
- #else
+#ifdef DISABLE_D_OPTION
+ exim_fail("exim: -D is not available in this Exim binary\n");
+#else
{
int ptr = 0;
macro_item *m;
while (isspace(*s)) s++;
if (*s < 'A' || *s > 'Z')
- {
- fprintf(stderr, "exim: macro name set by -D must start with "
+ exim_fail("exim: macro name set by -D must start with "
"an upper case letter\n");
- exit(EXIT_FAILURE);
- }
while (isalnum(*s) || *s == '_')
{
while (isspace(*s)) s++;
}
- for (m = macros; m; m = m->next)
+ for (m = macros_user; m; m = m->next)
if (Ustrcmp(m->name, name) == 0)
- {
- fprintf(stderr, "exim: duplicated -D in command line\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: duplicated -D in command line\n");
- m = macro_create(string_copy(name), string_copy(s), TRUE);
+ m = macro_create(name, s, TRUE);
if (clmacro_count >= MAX_CLMACROS)
- {
- fprintf(stderr, "exim: too many -D options on command line\n");
- exit(EXIT_FAILURE);
- }
- clmacros[clmacro_count++] = string_sprintf("-D%s=%s", m->name,
- m->replacement);
+ exim_fail("exim: too many -D options on command line\n");
+ clmacros[clmacro_count++] =
+ string_sprintf("-D%s=%s", m->name, m->replacement);
}
#endif
break;
- /* -d: Set debug level (see also -v below) or set the drop_cr option.
- The latter is now a no-op, retained for compatibility only. If -dd is used,
- debugging subprocesses of the daemon is disabled. */
-
case 'd':
+
+ /* -dropcr: Set this option. Now a no-op, retained for compatibility only. */
+
if (Ustrcmp(argrest, "ropcr") == 0)
{
/* drop_cr = TRUE; */
}
- /* Use an intermediate variable so that we don't set debugging while
- decoding the debugging bits. */
+ /* -dp: Set up a debug pretrigger buffer with given size. */
+
+ else if (Ustrcmp(argrest, "p") == 0)
+ if (++i >= argc)
+ badarg = TRUE;
+ else
+ debug_pretrigger_setup(argv[i]);
+
+ /* -dt: Set a debug trigger selector */
+
+ else if (Ustrncmp(argrest, "t=", 2) == 0)
+ dtrigger_selector = (unsigned int) Ustrtol(argrest + 2, NULL, 0);
+
+ /* -d: Set debug level (see also -v below).
+ If -dd is used, debugging subprocesses of the daemon is disabled. */
else
{
+ /* Use an intermediate variable so that we don't set debugging while
+ decoding the debugging bits. */
+
unsigned int selector = D_default;
debug_selector = 0;
debug_file = NULL;
if (*argrest == 'd')
{
- debug_daemon = TRUE;
+ f.debug_daemon = TRUE;
argrest++;
}
- if (*argrest != 0)
+ if (*argrest)
decode_bits(&selector, 1, debug_notall, argrest,
debug_options, debug_options_count, US"debug", 0);
debug_selector = selector;
message_reference at it, for logging. */
case 'E':
- local_error_message = TRUE;
+ f.local_error_message = TRUE;
if (mac_ismsgid(argrest)) message_reference = argrest;
break;
the -F or be in the next argument. */
case 'F':
- if (*argrest == 0)
- {
- if(++i < argc) argrest = argv[i]; else
- { badarg = TRUE; break; }
- }
- originator_name = argrest;
- sender_name_forced = TRUE;
+ if (!*argrest)
+ if (++i < argc) argrest = argv[i]; else { badarg = TRUE; break; }
+ originator_name = string_copy_taint(
+ exim_str_fail_toolong(argrest, EXIM_HUMANNAME_MAX, "-F"),
+ GET_TAINTED);
+ f.sender_name_forced = TRUE;
break;
{
int dummy_start, dummy_end;
uschar *errmess;
- if (*argrest == 0)
- {
- if (i+1 < argc) argrest = argv[++i]; else
- { badarg = TRUE; break; }
- }
- if (*argrest == 0)
- sender_address = string_sprintf(""); /* Ensure writeable memory */
+ if (!*argrest)
+ if (i+1 < argc) argrest = argv[++i]; else { badarg = TRUE; break; }
+ (void) exim_str_fail_toolong(argrest, EXIM_DISPLAYMAIL_MAX, "-f");
+ if (!*argrest)
+ *(sender_address = store_get(1, GET_UNTAINTED)) = '\0'; /* Ensure writeable memory */
else
{
- uschar *temp = argrest + Ustrlen(argrest) - 1;
+ uschar * temp = argrest + Ustrlen(argrest) - 1;
while (temp >= argrest && isspace(*temp)) temp--;
if (temp >= argrest && *temp == '.') f_end_dot = TRUE;
allow_domain_literals = TRUE;
#ifdef SUPPORT_I18N
allow_utf8_domains = TRUE;
#endif
- sender_address = parse_extract_address(argrest, &errmess,
- &dummy_start, &dummy_end, &sender_address_domain, TRUE);
+ if (!(sender_address = parse_extract_address(argrest, &errmess,
+ &dummy_start, &dummy_end, &sender_address_domain, TRUE)))
+ exim_fail("exim: bad -f address \"%s\": %s\n", argrest, errmess);
+
+ sender_address = string_copy_taint(sender_address, GET_TAINTED);
#ifdef SUPPORT_I18N
message_smtputf8 = string_is_utf8(sender_address);
allow_utf8_domains = FALSE;
#endif
allow_domain_literals = FALSE;
strip_trailing_dot = FALSE;
- if (sender_address == NULL)
- {
- fprintf(stderr, "exim: bad -f address \"%s\": %s\n", argrest, errmess);
- return EXIT_FAILURE;
- }
}
- sender_address_forced = TRUE;
+ f.sender_address_forced = TRUE;
}
break;
To put it in will require a change to the spool header file format. */
case 'h':
- if (*argrest == 0)
- {
- if(++i < argc) argrest = argv[i]; else
- { badarg = TRUE; break; }
- }
+ if (!*argrest)
+ if (++i < argc) argrest = argv[i]; else { badarg = TRUE; break; }
if (!isdigit(*argrest)) badarg = TRUE;
break;
not to be documented for sendmail but mailx (at least) uses it) */
case 'i':
- if (*argrest == 0) dot_ends = FALSE; else badarg = TRUE;
+ if (!*argrest) f.dot_ends = FALSE; else badarg = TRUE;
break;
syslog_processname in the config file, but needs to be an admin option. */
case 'L':
- if (*argrest == '\0')
- {
- if(++i < argc) argrest = argv[i]; else
- { badarg = TRUE; break; }
- }
- sz = Ustrlen(argrest);
- if (sz > 32)
- {
- fprintf(stderr, "exim: the -L syslog name is too long: \"%s\"\n", argrest);
- return EXIT_FAILURE;
- }
+ if (!*argrest)
+ if (++i < argc) argrest = argv[i]; else { badarg = TRUE; break; }
+ if ((sz = Ustrlen(argrest)) > 32)
+ exim_fail("exim: the -L syslog name is too long: \"%s\"\n", argrest);
if (sz < 1)
- {
- fprintf(stderr, "exim: the -L syslog name is too short\n");
- return EXIT_FAILURE;
- }
- cmdline_syslog_name = argrest;
+ exim_fail("exim: the -L syslog name is too short\n");
+ cmdline_syslog_name = string_copy_taint(argrest, GET_TAINTED);
break;
case 'M':
EXIM_SOCKLEN_T size = sizeof(interface_sock);
if (argc != i + 6)
- {
- fprintf(stderr, "exim: too many or too few arguments after -MC\n");
- return EXIT_FAILURE;
- }
+ exim_fail("exim: too many or too few arguments after -MC\n");
if (msg_action_arg >= 0)
- {
- fprintf(stderr, "exim: incompatible arguments\n");
- return EXIT_FAILURE;
- }
-
- continue_transport = argv[++i];
- continue_hostname = argv[++i];
- continue_host_address = argv[++i];
+ exim_fail("exim: incompatible arguments\n");
+
+ continue_transport = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_DRIVERNAME_MAX, "-C internal transport"),
+ GET_TAINTED);
+ continue_hostname = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_HOSTNAME_MAX, "-C internal hostname"),
+ GET_TAINTED);
+ continue_host_address = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_IPADDR_MAX, "-C internal hostaddr"),
+ GET_TAINTED);
continue_sequence = Uatoi(argv[++i]);
msg_action = MSG_DELIVER;
msg_action_arg = ++i;
queue_run_pipe = passed_qr_pipe;
if (!mac_ismsgid(argv[i]))
- {
- fprintf(stderr, "exim: malformed message id %s after -MC option\n",
+ exim_fail("exim: malformed message id %s after -MC option\n",
argv[i]);
- return EXIT_FAILURE;
- }
/* Set up $sending_ip_address and $sending_port, unless proxied */
sending_ip_address = host_ntoa(-1, &interface_sock, NULL,
&sending_port);
else
- {
- fprintf(stderr, "exim: getsockname() failed after -MC option: %s\n",
+ exim_fail("exim: getsockname() failed after -MC option: %s\n",
strerror(errno));
- return EXIT_FAILURE;
- }
- if (running_in_test_harness) millisleep(500);
+ testharness_pause_ms(500);
break;
}
precedes -MC (see above). The flag indicates that the host to which
Exim is connected has accepted an AUTH sequence. */
- case 'A': smtp_authenticated = TRUE; break;
+ case 'A': f.smtp_authenticated = TRUE; break;
/* -MCD: set the smtp_use_dsn flag; this indicates that the host
that exim is connected to supports the esmtp extension DSN */
case 'D': smtp_peer_options |= OPTION_DSN; break;
- /* -MCG: set the queue name, to a non-default value */
+ /* -MCd: for debug, set a process-purpose string */
- case 'G': if (++i < argc) queue_name = string_copy(argv[i]);
+ case 'd': if (++i < argc)
+ process_purpose = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_DRIVERNAME_MAX, "-MCd"),
+ GET_TAINTED);
+ else badarg = TRUE;
+ break;
+
+ /* -MCG: set the queue name, to a non-default value. Arguably, anything
+ from the commandline should be tainted - but we will need an untainted
+ value for the spoolfile when doing a -odi delivery process. */
+
+ case 'G': if (++i < argc) queue_name = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_DRIVERNAME_MAX, "-MCG"),
+ GET_UNTAINTED);
else badarg = TRUE;
break;
case 'K': smtp_peer_options |= OPTION_CHUNKING; break;
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ /* -MCL: peer used LIMITS RCPTMAX and/or RCPTDOMAINMAX */
+ case 'L': if (++i < argc) continue_limit_mail = Uatoi(argv[i]);
+ else badarg = TRUE;
+ if (++i < argc) continue_limit_rcpt = Uatoi(argv[i]);
+ else badarg = TRUE;
+ if (++i < argc) continue_limit_rcptdom = Uatoi(argv[i]);
+ else badarg = TRUE;
+ break;
+#endif
+
/* -MCP: set the smtp_use_pipelining flag; this is useful only when
it preceded -MC (see above) */
case 'P': smtp_peer_options |= OPTION_PIPE; break;
+#ifdef SUPPORT_SOCKS
+ /* -MCp: Socks proxy in use; nearside IP, port, external IP, port */
+ case 'p': proxy_session = TRUE;
+ if (++i < argc)
+ {
+ proxy_local_address = string_copy_taint(argv[i], GET_TAINTED);
+ if (++i < argc)
+ {
+ proxy_local_port = Uatoi(argv[i]);
+ if (++i < argc)
+ {
+ proxy_external_address = string_copy_taint(argv[i], GET_TAINTED);
+ if (++i < argc)
+ {
+ proxy_external_port = Uatoi(argv[i]);
+ break;
+ } } } }
+ badarg = TRUE;
+ break;
+#endif
/* -MCQ: pass on the pid of the queue-running process that started
this chain of deliveries and the fd of its synchronizing pipe; this
is useful only when it precedes -MC (see above) */
else badarg = TRUE;
break;
+ /* -MCq: do a quota check on the given recipient for the given size
+ of message. Separate from -MC. */
+ case 'q': rcpt_verify_quota = TRUE;
+ if (++i < argc) message_size = Uatoi(argv[i]);
+ else badarg = TRUE;
+ break;
+
/* -MCS: set the smtp_use_size flag; this is useful only when it
precedes -MC (see above) */
case 'S': smtp_peer_options |= OPTION_SIZE; break;
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
+ /* -MCs: used with -MCt; SNI was sent */
+ /* -MCr: ditto, DANE */
+
+ case 'r':
+ case 's': if (++i < argc)
+ {
+ continue_proxy_sni = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_HOSTNAME_MAX, "-MCr/-MCs"),
+ GET_TAINTED);
+ if (argrest[1] == 'r') continue_proxy_dane = TRUE;
+ }
+ else badarg = TRUE;
+ break;
+
/* -MCt: similar to -MCT below but the connection is still open
- via a proxy proces which handles the TLS context and coding.
+ via a proxy process which handles the TLS context and coding.
Require three arguments for the proxied local address and port,
- and the TLS cipher. */
+ and the TLS cipher. */
- case 't': if (++i < argc) sending_ip_address = argv[i];
+ case 't': if (++i < argc)
+ sending_ip_address = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_IPADDR_MAX, "-MCt IP"),
+ GET_TAINTED);
else badarg = TRUE;
- if (++i < argc) sending_port = (int)(Uatol(argv[i]));
+ if (++i < argc)
+ sending_port = (int)(Uatol(argv[i]));
else badarg = TRUE;
- if (++i < argc) continue_proxy_cipher = argv[i];
+ if (++i < argc)
+ continue_proxy_cipher = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_CIPHERNAME_MAX, "-MCt cipher"),
+ GET_TAINTED);
else badarg = TRUE;
/*FALLTHROUGH*/
default: badarg = TRUE; break;
}
- break;
+ break;
}
/* -M[x]: various operations on the following list of message ids:
following options which are followed by a single message id, and which
act on that message. Some of them use the "recipient" addresses as well.
-Mar add recipient(s)
+ -MG move to a different queue
-Mmad mark all recipients delivered
-Mmd mark recipients(s) delivered
-Mes edit sender
-Mvl show log
*/
- else if (*argrest == 0)
+ else if (!*argrest)
{
msg_action = MSG_DELIVER;
- forced_delivery = deliver_force_thaw = TRUE;
+ forced_delivery = f.deliver_force_thaw = TRUE;
}
else if (Ustrcmp(argrest, "ar") == 0)
{
msg_action = MSG_DELIVER;
deliver_give_up = TRUE;
}
- else if (Ustrcmp(argrest, "mad") == 0)
+ else if (Ustrcmp(argrest, "G") == 0)
{
- msg_action = MSG_MARK_ALL_DELIVERED;
+ msg_action = MSG_SETQUEUE;
+ queue_name_dest = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_DRIVERNAME_MAX, "-MG"),
+ GET_TAINTED);
}
+ else if (Ustrcmp(argrest, "mad") == 0) msg_action = MSG_MARK_ALL_DELIVERED;
else if (Ustrcmp(argrest, "md") == 0)
{
msg_action = MSG_MARK_DELIVERED;
msg_action_arg = i + 1;
if (msg_action_arg >= argc)
- {
- fprintf(stderr, "exim: no message ids given after %s option\n", arg);
- return EXIT_FAILURE;
- }
+ exim_fail("exim: no message ids given after %s option\n", arg);
/* Some require only message ids to follow */
if (!one_msg_action)
{
- int j;
- for (j = msg_action_arg; j < argc; j++) if (!mac_ismsgid(argv[j]))
- {
- fprintf(stderr, "exim: malformed message id %s after %s option\n",
+ for (int j = msg_action_arg; j < argc; j++) if (!mac_ismsgid(argv[j]))
+ exim_fail("exim: malformed message id %s after %s option\n",
argv[j], arg);
- return EXIT_FAILURE;
- }
goto END_ARG; /* Remaining args are ids */
}
else
{
if (!mac_ismsgid(argv[msg_action_arg]))
- {
- fprintf(stderr, "exim: malformed message id %s after %s option\n",
+ exim_fail("exim: malformed message id %s after %s option\n",
argv[msg_action_arg], arg);
- return EXIT_FAILURE;
- }
i++;
}
break;
for sendmail it askes for "me too". Exim always does this. */
case 'm':
- if (*argrest != 0) badarg = TRUE;
+ if (*argrest) badarg = TRUE;
break;
their thing. It implies debugging at the D_v level. */
case 'N':
- if (*argrest == 0)
+ if (!*argrest)
{
- dont_deliver = TRUE;
+ f.dont_deliver = TRUE;
debug_selector |= D_v;
debug_file = stderr;
}
-O option=value and -Ooption=value. */
case 'O':
- if (*argrest == 0)
- {
+ if (!*argrest)
if (++i >= argc)
- {
- fprintf(stderr, "exim: string expected after -O\n");
- exit(EXIT_FAILURE);
- }
- }
+ exim_fail("exim: string expected after -O\n");
break;
case 'o':
-
- /* -oA: Set an argument for the bi command (sendmail's "alternate alias
- file" option). */
-
- if (*argrest == 'A')
+ switch (*argrest++)
{
- alias_arg = argrest + 1;
- if (alias_arg[0] == 0)
- {
- if (i+1 < argc) alias_arg = argv[++i]; else
- {
- fprintf(stderr, "exim: string expected after -oA\n");
- exit(EXIT_FAILURE);
- }
- }
- }
+ /* -oA: Set an argument for the bi command (sendmail's "alternate alias
+ file" option). */
+ case 'A':
+ if (!*(alias_arg = argrest))
+ if (i+1 < argc) alias_arg = argv[++i];
+ else exim_fail("exim: string expected after -oA\n");
+ break;
- /* -oB: Set a connection message max value for remote deliveries */
+ /* -oB: Set a connection message max value for remote deliveries */
+ case 'B':
+ {
+ uschar * p = argrest;
+ if (!*p)
+ if (i+1 < argc && isdigit((argv[i+1][0])))
+ p = argv[++i];
+ else
+ {
+ connection_max_messages = 1;
+ p = NULL;
+ }
- else if (*argrest == 'B')
- {
- uschar *p = argrest + 1;
- if (p[0] == 0)
- {
- if (i+1 < argc && isdigit((argv[i+1][0]))) p = argv[++i]; else
- {
- connection_max_messages = 1;
- p = NULL;
- }
- }
+ if (p)
+ {
+ if (!isdigit(*p))
+ exim_fail("exim: number expected after -oB\n");
+ connection_max_messages = Uatoi(p);
+ }
+ }
+ break;
- if (p != NULL)
- {
- if (!isdigit(*p))
- {
- fprintf(stderr, "exim: number expected after -oB\n");
- exit(EXIT_FAILURE);
- }
- connection_max_messages = Uatoi(p);
- }
- }
+ /* -odb: background delivery */
- /* -odb: background delivery */
+ case 'd':
+ if (Ustrcmp(argrest, "b") == 0)
+ {
+ f.synchronous_delivery = FALSE;
+ arg_queue_only = FALSE;
+ queue_only_set = TRUE;
+ }
- else if (Ustrcmp(argrest, "db") == 0)
- {
- synchronous_delivery = FALSE;
- arg_queue_only = FALSE;
- queue_only_set = TRUE;
- }
+ /* -odd: testsuite-only: add no inter-process delays */
- /* -odf: foreground delivery (smail-compatible option); same effect as
- -odi: interactive (synchronous) delivery (sendmail-compatible option)
- */
+ else if (Ustrcmp(argrest, "d") == 0)
+ f.testsuite_delays = FALSE;
- else if (Ustrcmp(argrest, "df") == 0 || Ustrcmp(argrest, "di") == 0)
- {
- synchronous_delivery = TRUE;
- arg_queue_only = FALSE;
- queue_only_set = TRUE;
- }
+ /* -odf: foreground delivery (smail-compatible option); same effect as
+ -odi: interactive (synchronous) delivery (sendmail-compatible option)
+ */
- /* -odq: queue only */
+ else if (Ustrcmp(argrest, "f") == 0 || Ustrcmp(argrest, "i") == 0)
+ {
+ f.synchronous_delivery = TRUE;
+ arg_queue_only = FALSE;
+ queue_only_set = TRUE;
+ }
- else if (Ustrcmp(argrest, "dq") == 0)
- {
- synchronous_delivery = FALSE;
- arg_queue_only = TRUE;
- queue_only_set = TRUE;
- }
+ /* -odq: queue only */
- /* -odqs: queue SMTP only - do local deliveries and remote routing,
- but no remote delivery */
+ else if (Ustrcmp(argrest, "q") == 0)
+ {
+ f.synchronous_delivery = FALSE;
+ arg_queue_only = TRUE;
+ queue_only_set = TRUE;
+ }
- else if (Ustrcmp(argrest, "dqs") == 0)
- {
- queue_smtp = TRUE;
- arg_queue_only = FALSE;
- queue_only_set = TRUE;
- }
+ /* -odqs: queue SMTP only - do local deliveries and remote routing,
+ but no remote delivery */
- /* -oex: Sendmail error flags. As these are also accepted without the
- leading -o prefix, for compatibility with vacation and other callers,
- they are handled with -e above. */
+ else if (Ustrcmp(argrest, "qs") == 0)
+ {
+ f.queue_smtp = TRUE;
+ arg_queue_only = FALSE;
+ queue_only_set = TRUE;
+ }
+ else badarg = TRUE;
+ break;
- /* -oi: Set flag so dot doesn't end non-SMTP input (same as -i)
- -oitrue: Another sendmail syntax for the same */
+ /* -oex: Sendmail error flags. As these are also accepted without the
+ leading -o prefix, for compatibility with vacation and other callers,
+ they are handled with -e above. */
- else if (Ustrcmp(argrest, "i") == 0 ||
- Ustrcmp(argrest, "itrue") == 0)
- dot_ends = FALSE;
+ /* -oi: Set flag so dot doesn't end non-SMTP input (same as -i)
+ -oitrue: Another sendmail syntax for the same */
+
+ case 'i':
+ if (!*argrest || Ustrcmp(argrest, "true") == 0)
+ f.dot_ends = FALSE;
+ else badarg = TRUE;
+ break;
/* -oM*: Set various characteristics for an incoming message; actually
acted on for trusted callers only. */
- else if (*argrest == 'M')
- {
- if (i+1 >= argc)
- {
- fprintf(stderr, "exim: data expected after -o%s\n", argrest);
- exit(EXIT_FAILURE);
- }
-
- /* -oMa: Set sender host address */
+ case 'M':
+ {
+ if (i+1 >= argc)
+ exim_fail("exim: data expected after -oM%s\n", argrest);
- if (Ustrcmp(argrest, "Ma") == 0) sender_host_address = argv[++i];
+ /* -oMa: Set sender host address */
- /* -oMaa: Set authenticator name */
+ if (Ustrcmp(argrest, "a") == 0)
+ sender_host_address = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_IPADDR_MAX, "-oMa"),
+ GET_TAINTED);
- else if (Ustrcmp(argrest, "Maa") == 0)
- sender_host_authenticated = argv[++i];
+ /* -oMaa: Set authenticator name */
- /* -oMas: setting authenticated sender */
+ else if (Ustrcmp(argrest, "aa") == 0)
+ sender_host_authenticated = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_DRIVERNAME_MAX, "-oMaa"),
+ GET_TAINTED);
- else if (Ustrcmp(argrest, "Mas") == 0) authenticated_sender = argv[++i];
+ /* -oMas: setting authenticated sender */
- /* -oMai: setting authenticated id */
+ else if (Ustrcmp(argrest, "as") == 0)
+ authenticated_sender = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_EMAILADDR_MAX, "-oMas"),
+ GET_TAINTED);
- else if (Ustrcmp(argrest, "Mai") == 0) authenticated_id = argv[++i];
+ /* -oMai: setting authenticated id */
- /* -oMi: Set incoming interface address */
+ else if (Ustrcmp(argrest, "ai") == 0)
+ authenticated_id = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_EMAILADDR_MAX, "-oMai"),
+ GET_TAINTED);
- else if (Ustrcmp(argrest, "Mi") == 0) interface_address = argv[++i];
+ /* -oMi: Set incoming interface address */
- /* -oMm: Message reference */
+ else if (Ustrcmp(argrest, "i") == 0)
+ interface_address = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_IPADDR_MAX, "-oMi"),
+ GET_TAINTED);
- else if (Ustrcmp(argrest, "Mm") == 0)
- {
- if (!mac_ismsgid(argv[i+1]))
- {
- fprintf(stderr,"-oMm must be a valid message ID\n");
- exit(EXIT_FAILURE);
- }
- if (!trusted_config)
- {
- fprintf(stderr,"-oMm must be called by a trusted user/config\n");
- exit(EXIT_FAILURE);
- }
- message_reference = argv[++i];
- }
+ /* -oMm: Message reference */
- /* -oMr: Received protocol */
+ else if (Ustrcmp(argrest, "m") == 0)
+ {
+ if (!mac_ismsgid(argv[i+1]))
+ exim_fail("-oMm must be a valid message ID\n");
+ if (!f.trusted_config)
+ exim_fail("-oMm must be called by a trusted user/config\n");
+ message_reference = argv[++i];
+ }
- else if (Ustrcmp(argrest, "Mr") == 0)
+ /* -oMr: Received protocol */
- if (received_protocol)
- {
- fprintf(stderr, "received_protocol is set already\n");
- exit(EXIT_FAILURE);
- }
- else received_protocol = argv[++i];
+ else if (Ustrcmp(argrest, "r") == 0)
- /* -oMs: Set sender host name */
+ if (received_protocol)
+ exim_fail("received_protocol is set already\n");
+ else
+ received_protocol = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_DRIVERNAME_MAX, "-oMr"),
+ GET_TAINTED);
- else if (Ustrcmp(argrest, "Ms") == 0) sender_host_name = argv[++i];
+ /* -oMs: Set sender host name */
- /* -oMt: Set sender ident */
+ else if (Ustrcmp(argrest, "s") == 0)
+ sender_host_name = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_HOSTNAME_MAX, "-oMs"),
+ GET_TAINTED);
- else if (Ustrcmp(argrest, "Mt") == 0)
- {
- sender_ident_set = TRUE;
- sender_ident = argv[++i];
- }
+ /* -oMt: Set sender ident */
- /* Else a bad argument */
+ else if (Ustrcmp(argrest, "t") == 0)
+ {
+ sender_ident_set = TRUE;
+ sender_ident = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_IDENTUSER_MAX, "-oMt"),
+ GET_TAINTED);
+ }
- else
- {
- badarg = TRUE;
- break;
- }
- }
+ /* Else a bad argument */
- /* -om: Me-too flag for aliases. Exim always does this. Some programs
- seem to call this as -m (undocumented), so that is also accepted (see
- above). */
+ else
+ badarg = TRUE;
+ }
+ break;
- else if (Ustrcmp(argrest, "m") == 0) {}
+ /* -om: Me-too flag for aliases. Exim always does this. Some programs
+ seem to call this as -m (undocumented), so that is also accepted (see
+ above). */
+ /* -oo: An ancient flag for old-style addresses which still seems to
+ crop up in some calls (see in SCO). */
- /* -oo: An ancient flag for old-style addresses which still seems to
- crop up in some calls (see in SCO). */
+ case 'm':
+ case 'o':
+ if (*argrest) badarg = TRUE;
+ break;
- else if (Ustrcmp(argrest, "o") == 0) {}
+ /* -oP <name>: set pid file path for daemon
+ -oPX: delete pid file of daemon */
+
+ case 'P':
+ if (!f.running_in_test_harness && real_uid != root_uid && real_uid != exim_uid)
+ exim_fail("exim: only uid=%d or uid=%d can use -oP and -oPX "
+ "(uid=%d euid=%d | %d)\n",
+ root_uid, exim_uid, getuid(), geteuid(), real_uid);
+ if (!*argrest) override_pid_file_path = argv[++i];
+ else if (Ustrcmp(argrest, "X") == 0) delete_pid_file();
+ else badarg = TRUE;
+ break;
- /* -oP <name>: set pid file path for daemon */
- else if (Ustrcmp(argrest, "P") == 0)
- override_pid_file_path = argv[++i];
+ /* -or <n>: set timeout for non-SMTP acceptance
+ -os <n>: set timeout for SMTP acceptance */
- /* -or <n>: set timeout for non-SMTP acceptance
- -os <n>: set timeout for SMTP acceptance */
+ case 'r':
+ case 's':
+ {
+ int * tp = argrest[-1] == 'r'
+ ? &arg_receive_timeout : &arg_smtp_receive_timeout;
+ if (*argrest)
+ *tp = readconf_readtime(argrest, 0, FALSE);
+ else if (i+1 < argc)
+ *tp = readconf_readtime(argv[++i], 0, FALSE);
+
+ if (*tp < 0)
+ exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
+ }
+ break;
- else if (*argrest == 'r' || *argrest == 's')
- {
- int *tp = (*argrest == 'r')?
- &arg_receive_timeout : &arg_smtp_receive_timeout;
- if (argrest[1] == 0)
- {
- if (i+1 < argc) *tp= readconf_readtime(argv[++i], 0, FALSE);
- }
- else *tp = readconf_readtime(argrest + 1, 0, FALSE);
- if (*tp < 0)
- {
- fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]);
- exit(EXIT_FAILURE);
- }
- }
+ /* -oX <list>: Override local_interfaces and/or default daemon ports */
+ /* Limits: Is there a real limit we want here? 1024 is very arbitrary. */
- /* -oX <list>: Override local_interfaces and/or default daemon ports */
+ case 'X':
+ if (*argrest) badarg = TRUE;
+ else override_local_interfaces = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], 1024, "-oX"),
+ GET_TAINTED);
+ break;
- else if (Ustrcmp(argrest, "X") == 0)
- override_local_interfaces = argv[++i];
+ /* -oY: Override creation of daemon notifier socket */
- /* Unknown -o argument */
+ case 'Y':
+ if (*argrest) badarg = TRUE;
+ else notifier_socket = NULL;
+ break;
- else badarg = TRUE;
+ /* Unknown -o argument */
+
+ default:
+ badarg = TRUE;
+ }
break;
/* -panythingelse is taken as the Sendmail-compatible argument -prval:sval,
which sets the host protocol and host name */
- if (*argrest == 0)
- {
- if (i+1 < argc) argrest = argv[++i]; else
- { badarg = TRUE; break; }
- }
+ if (!*argrest)
+ if (i+1 < argc) argrest = argv[++i]; else { badarg = TRUE; break; }
- if (*argrest != 0)
+ if (*argrest)
{
- uschar *hn;
+ uschar * hn = Ustrchr(argrest, ':');
if (received_protocol)
- {
- fprintf(stderr, "received_protocol is set already\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("received_protocol is set already\n");
- hn = Ustrchr(argrest, ':');
- if (hn == NULL)
- {
- received_protocol = argrest;
- }
+ if (!hn)
+ received_protocol = string_copy_taint(
+ exim_str_fail_toolong(argrest, EXIM_DRIVERNAME_MAX, "-p<protocol>"),
+ GET_TAINTED);
else
{
- int old_pool = store_pool;
- store_pool = POOL_PERM;
- received_protocol = string_copyn(argrest, hn - argrest);
- store_pool = old_pool;
- sender_host_name = hn + 1;
+ (void) exim_str_fail_toolong(argrest, (EXIM_DRIVERNAME_MAX+1+EXIM_HOSTNAME_MAX), "-p<protocol>:<host>");
+ received_protocol = string_copyn_taint(argrest, hn - argrest, GET_TAINTED);
+ sender_host_name = string_copy_taint(hn + 1, GET_TAINTED);
}
}
break;
case 'q':
receiving_message = FALSE;
if (queue_interval >= 0)
- {
- fprintf(stderr, "exim: -q specified more than once\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: -q specified more than once\n");
/* -qq...: Do queue runs in a 2-stage manner */
if (*argrest == 'q')
{
- queue_2stage = TRUE;
+ f.queue_2stage = TRUE;
argrest++;
}
if (*argrest == 'i')
{
- queue_run_first_delivery = TRUE;
+ f.queue_run_first_delivery = TRUE;
argrest++;
}
if (*argrest == 'f')
{
- queue_run_force = TRUE;
+ f.queue_run_force = TRUE;
if (*++argrest == 'f')
{
- deliver_force_thaw = TRUE;
+ f.deliver_force_thaw = TRUE;
argrest++;
}
}
if (*argrest == 'l')
{
- queue_run_local = TRUE;
+ f.queue_run_local = TRUE;
argrest++;
}
{
int i;
for (argrest++, i = 0; argrest[i] && argrest[i] != '/'; ) i++;
+ exim_len_fail_toolong(i, EXIM_DRIVERNAME_MAX, "-q*G<name>");
queue_name = string_copyn(argrest, i);
argrest += i;
if (*argrest == '/') argrest++;
/* -q[f][f][l][G<name>]: Run the queue, optionally forced, optionally local
only, optionally named, optionally starting from a given message id. */
- if (*argrest == 0 &&
- (i + 1 >= argc || argv[i+1][0] == '-' || mac_ismsgid(argv[i+1])))
- {
- queue_interval = 0;
- if (i+1 < argc && mac_ismsgid(argv[i+1]))
- start_queue_run_id = argv[++i];
- if (i+1 < argc && mac_ismsgid(argv[i+1]))
- stop_queue_run_id = argv[++i];
- }
+ if (!(list_queue || count_queue))
+ if ( !*argrest
+ && (i + 1 >= argc || argv[i+1][0] == '-' || mac_ismsgid(argv[i+1])))
+ {
+ queue_interval = 0;
+ if (i+1 < argc && mac_ismsgid(argv[i+1]))
+ start_queue_run_id = string_copy_taint(argv[++i], GET_TAINTED);
+ if (i+1 < argc && mac_ismsgid(argv[i+1]))
+ stop_queue_run_id = string_copy_taint(argv[++i], GET_TAINTED);
+ }
/* -q[f][f][l][G<name>/]<n>: Run the queue at regular intervals, optionally
forced, optionally local only, optionally named. */
- else if ((queue_interval = readconf_readtime(*argrest ? argrest : argv[++i],
- 0, FALSE)) <= 0)
- {
- fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]);
- exit(EXIT_FAILURE);
- }
+ else if ((queue_interval = readconf_readtime(*argrest ? argrest : argv[++i],
+ 0, FALSE)) <= 0)
+ exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
break;
case 'R': /* Synonymous with -qR... */
- receiving_message = FALSE;
+ {
+ const uschar *tainted_selectstr;
+
+ receiving_message = FALSE;
/* -Rf: As -R (below) but force all deliveries,
-Rff: Ditto, but also thaw all frozen messages,
in all cases provided there are no further characters in this
argument. */
- if (*argrest != 0)
- {
- int i;
- for (i = 0; i < nelem(rsopts); i++)
- if (Ustrcmp(argrest, rsopts[i]) == 0)
- {
- if (i != 2) queue_run_force = TRUE;
- if (i >= 2) deliver_selectstring_regex = TRUE;
- if (i == 1 || i == 4) deliver_force_thaw = TRUE;
- argrest += Ustrlen(rsopts[i]);
- }
- }
+ if (*argrest)
+ for (int i = 0; i < nelem(rsopts); i++)
+ if (Ustrcmp(argrest, rsopts[i]) == 0)
+ {
+ if (i != 2) f.queue_run_force = TRUE;
+ if (i >= 2) f.deliver_selectstring_regex = TRUE;
+ if (i == 1 || i == 4) f.deliver_force_thaw = TRUE;
+ argrest += Ustrlen(rsopts[i]);
+ }
/* -R: Set string to match in addresses for forced queue run to
pick out particular messages. */
- if (*argrest)
- deliver_selectstring = argrest;
- else if (i+1 < argc)
- deliver_selectstring = argv[++i];
- else
- {
- fprintf(stderr, "exim: string expected after -R\n");
- exit(EXIT_FAILURE);
+ /* Avoid attacks from people providing very long strings, and do so before
+ we make copies. */
+ if (*argrest)
+ tainted_selectstr = argrest;
+ else if (i+1 < argc)
+ tainted_selectstr = argv[++i];
+ else
+ exim_fail("exim: string expected after -R\n");
+ deliver_selectstring = string_copy_taint(
+ exim_str_fail_toolong(tainted_selectstr, EXIM_EMAILADDR_MAX, "-R"),
+ GET_TAINTED);
}
break;
-
/* -r: an obsolete synonym for -f (see above) */
/* -S: Like -R but works on sender. */
case 'S': /* Synonymous with -qS... */
- receiving_message = FALSE;
+ {
+ const uschar *tainted_selectstr;
+
+ receiving_message = FALSE;
/* -Sf: As -S (below) but force all deliveries,
-Sff: Ditto, but also thaw all frozen messages,
in all cases provided there are no further characters in this
argument. */
- if (*argrest)
- {
- int i;
- for (i = 0; i < nelem(rsopts); i++)
- if (Ustrcmp(argrest, rsopts[i]) == 0)
- {
- if (i != 2) queue_run_force = TRUE;
- if (i >= 2) deliver_selectstring_sender_regex = TRUE;
- if (i == 1 || i == 4) deliver_force_thaw = TRUE;
- argrest += Ustrlen(rsopts[i]);
- }
- }
+ if (*argrest)
+ for (int i = 0; i < nelem(rsopts); i++)
+ if (Ustrcmp(argrest, rsopts[i]) == 0)
+ {
+ if (i != 2) f.queue_run_force = TRUE;
+ if (i >= 2) f.deliver_selectstring_sender_regex = TRUE;
+ if (i == 1 || i == 4) f.deliver_force_thaw = TRUE;
+ argrest += Ustrlen(rsopts[i]);
+ }
/* -S: Set string to match in addresses for forced queue run to
pick out particular messages. */
- if (*argrest)
- deliver_selectstring_sender = argrest;
- else if (i+1 < argc)
- deliver_selectstring_sender = argv[++i];
- else
- {
- fprintf(stderr, "exim: string expected after -S\n");
- exit(EXIT_FAILURE);
+ if (*argrest)
+ tainted_selectstr = argrest;
+ else if (i+1 < argc)
+ tainted_selectstr = argv[++i];
+ else
+ exim_fail("exim: string expected after -S\n");
+ deliver_selectstring_sender = string_copy_taint(
+ exim_str_fail_toolong(tainted_selectstr, EXIM_EMAILADDR_MAX, "-S"),
+ GET_TAINTED);
}
break;
tested. Otherwise variability of clock ticks etc. cause problems. */
case 'T':
- if (running_in_test_harness && Ustrcmp(argrest, "qt") == 0)
- fudged_queue_times = argv[++i];
+ if (f.running_in_test_harness && Ustrcmp(argrest, "qt") == 0)
+ fudged_queue_times = string_copy_taint(argv[++i], GET_TAINTED);
else badarg = TRUE;
break;
/* -t: Set flag to extract recipients from body of message. */
case 't':
- if (*argrest == 0) extract_recipients = TRUE;
+ if (!*argrest) extract_recipients = TRUE;
/* -ti: Set flag to extract recipients from body of message, and also
specify that dot does not end the message. */
else if (Ustrcmp(argrest, "i") == 0)
{
extract_recipients = TRUE;
- dot_ends = FALSE;
+ f.dot_ends = FALSE;
}
/* -tls-on-connect: don't wait for STARTTLS (for old clients) */
- #ifdef SUPPORT_TLS
+ #ifndef DISABLE_TLS
else if (Ustrcmp(argrest, "ls-on-connect") == 0) tls_in.on_connect = TRUE;
#endif
/* -v: verify things - this is a very low-level debugging */
case 'v':
- if (*argrest == 0)
+ if (!*argrest)
{
debug_selector |= D_v;
debug_file = stderr;
As Exim is 8-bit clean, it just ignores this flag. */
case 'x':
- if (*argrest != 0) badarg = TRUE;
+ if (*argrest) badarg = TRUE;
break;
/* -X: in sendmail: takes one parameter, logfile, and sends debugging
logs to that file. We swallow the parameter and otherwise ignore it. */
case 'X':
- if (*argrest == '\0')
+ if (!*argrest)
if (++i >= argc)
- {
- fprintf(stderr, "exim: string expected after -X\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: string expected after -X\n");
break;
+ /* -z: a line of text to log */
+
case 'z':
- if (*argrest == '\0')
- if (++i < argc) log_oneline = argv[i]; else
- {
- fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]);
- exit(EXIT_FAILURE);
- }
+ if (!*argrest)
+ if (++i < argc)
+ log_oneline = string_copy_taint(
+ exim_str_fail_toolong(argv[i], 2048, "-z logtext"),
+ GET_TAINTED);
+ else
+ exim_fail("exim: file name expected after %s\n", argv[i-1]);
break;
/* All other initial characters are errors */
/* Failed to recognize the option, or syntax error */
if (badarg)
- {
- fprintf(stderr, "exim abandoned: unknown, malformed, or incomplete "
+ exim_fail("exim abandoned: unknown, malformed, or incomplete "
"option %s\n", arg);
- exit(EXIT_FAILURE);
- }
}
/* If -R or -S have been specified without -q, assume a single queue run. */
-if ( (deliver_selectstring || deliver_selectstring_sender)
- && queue_interval < 0)
- queue_interval = 0;
+ if ( (deliver_selectstring || deliver_selectstring_sender)
+ && queue_interval < 0)
+ queue_interval = 0;
END_ARG:
+ store_pool = old_pool;
+ }
+
/* If usage_wanted is set we call the usage function - which never returns */
if (usage_wanted) exim_usage(called_as);
/* Arguments have been processed. Check for incompatibilities. */
-if ((
- (smtp_input || extract_recipients || recipients_arg < argc) &&
- (daemon_listen || queue_interval >= 0 || bi_option ||
- test_retry_arg >= 0 || test_rewrite_arg >= 0 ||
- filter_test != FTEST_NONE || (msg_action_arg > 0 && !one_msg_action))
- ) ||
- (
- msg_action_arg > 0 &&
- (daemon_listen || queue_interval > 0 || list_options ||
- (checking && msg_action != MSG_LOAD) ||
- bi_option || test_retry_arg >= 0 || test_rewrite_arg >= 0)
- ) ||
- (
- (daemon_listen || queue_interval > 0) &&
- (sender_address != NULL || list_options || list_queue || checking ||
- bi_option)
- ) ||
- (
- daemon_listen && queue_interval == 0
- ) ||
- (
- inetd_wait_mode && queue_interval >= 0
- ) ||
- (
- list_options &&
- (checking || smtp_input || extract_recipients ||
- filter_test != FTEST_NONE || bi_option)
- ) ||
- (
- verify_address_mode &&
- (address_test_mode || smtp_input || extract_recipients ||
- filter_test != FTEST_NONE || bi_option)
- ) ||
- (
- address_test_mode && (smtp_input || extract_recipients ||
- filter_test != FTEST_NONE || bi_option)
- ) ||
- (
- smtp_input && (sender_address != NULL || filter_test != FTEST_NONE ||
- extract_recipients)
- ) ||
- (
- deliver_selectstring != NULL && queue_interval < 0
- ) ||
- (
- msg_action == MSG_LOAD &&
- (!expansion_test || expansion_test_message != NULL)
- )
+if ( ( (smtp_input || extract_recipients || recipients_arg < argc)
+ && ( f.daemon_listen || queue_interval >= 0 || bi_option
+ || test_retry_arg >= 0 || test_rewrite_arg >= 0
+ || filter_test != FTEST_NONE
+ || msg_action_arg > 0 && !one_msg_action
+ ) )
+ || ( msg_action_arg > 0
+ && ( f.daemon_listen || queue_interval > 0 || list_options
+ || checking && msg_action != MSG_LOAD
+ || bi_option || test_retry_arg >= 0 || test_rewrite_arg >= 0
+ ) )
+ || ( (f.daemon_listen || queue_interval > 0)
+ && ( sender_address || list_options || list_queue || checking
+ || bi_option
+ ) )
+ || f.daemon_listen && queue_interval == 0
+ || f.inetd_wait_mode && queue_interval >= 0
+ || ( list_options
+ && ( checking || smtp_input || extract_recipients
+ || filter_test != FTEST_NONE || bi_option
+ ) )
+ || ( verify_address_mode
+ && ( f.address_test_mode || smtp_input || extract_recipients
+ || filter_test != FTEST_NONE || bi_option
+ ) )
+ || ( f.address_test_mode
+ && ( smtp_input || extract_recipients || filter_test != FTEST_NONE
+ || bi_option
+ ) )
+ || ( smtp_input
+ && (sender_address || filter_test != FTEST_NONE || extract_recipients)
+ )
+ || deliver_selectstring && queue_interval < 0
+ || msg_action == MSG_LOAD && (!expansion_test || expansion_test_message)
)
- {
- fprintf(stderr, "exim: incompatible command-line options or arguments\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: incompatible command-line options or arguments\n");
/* If debugging is set up, set the file and the file descriptor to pass on to
child processes. It should, of course, be 2 for stderr. Also, force the daemon
{
debug_file = stderr;
debug_fd = fileno(debug_file);
- background_daemon = FALSE;
- if (running_in_test_harness) millisleep(100); /* lets caller finish */
+ f.background_daemon = FALSE;
+ testharness_pause_ms(100); /* lets caller finish */
if (debug_selector != D_v) /* -v only doesn't show this */
{
debug_printf("Exim version %s uid=%ld gid=%ld pid=%d D=%x\n",
version_string, (long int)real_uid, (long int)real_gid, (int)getpid(),
debug_selector);
if (!version_printed)
- show_whats_supported(stderr);
+ show_whats_supported(FALSE);
}
}
{
struct rlimit rlp;
- #ifdef RLIMIT_NOFILE
+#ifdef RLIMIT_NOFILE
if (getrlimit(RLIMIT_NOFILE, &rlp) < 0)
{
log_write(0, LOG_MAIN|LOG_PANIC, "getrlimit(RLIMIT_NOFILE) failed: %s",
strerror(errno));
}
}
- #endif
+#endif
- #ifdef RLIMIT_NPROC
+#ifdef RLIMIT_NPROC
if (getrlimit(RLIMIT_NPROC, &rlp) < 0)
{
log_write(0, LOG_MAIN|LOG_PANIC, "getrlimit(RLIMIT_NPROC) failed: %s",
rlp.rlim_cur = rlp.rlim_max = 0;
}
- #ifdef RLIM_INFINITY
+# ifdef RLIM_INFINITY
if (rlp.rlim_cur != RLIM_INFINITY && rlp.rlim_cur < 1000)
{
rlp.rlim_cur = rlp.rlim_max = RLIM_INFINITY;
- #else
+# else
if (rlp.rlim_cur < 1000)
{
rlp.rlim_cur = rlp.rlim_max = 1000;
- #endif
+# endif
if (setrlimit(RLIMIT_NPROC, &rlp) < 0)
log_write(0, LOG_MAIN|LOG_PANIC, "setrlimit(RLIMIT_NPROC) failed: %s",
strerror(errno));
}
- #endif
+#endif
}
/* Exim is normally entered as root (but some special configurations are
till after reading the config, which might specify the exim gid. Therefore,
save the group list here first. */
-group_count = getgroups(NGROUPS_MAX, group_list);
-if (group_count < 0)
- {
- fprintf(stderr, "exim: getgroups() failed: %s\n", strerror(errno));
- exit(EXIT_FAILURE);
- }
+if ((group_count = getgroups(nelem(group_list), group_list)) < 0)
+ exim_fail("exim: getgroups() failed: %s\n", strerror(errno));
/* There is a fundamental difference in some BSD systems in the matter of
groups. FreeBSD and BSDI are known to be different; NetBSD and OpenBSD are
list. Calling setgroups() with zero groups on a "different" system results in
an error return. The following code should cope with both types of system.
+ Unfortunately, recent MacOS, which should be a FreeBSD, "helpfully" succeeds
+ the "setgroups() with zero groups" - and changes the egid.
+ Thanks to that we had to stash the original_egid above, for use below
+ in the call to exim_setugid().
+
However, if this process isn't running as root, setgroups() can't be used
-since you have to be root to run it, even if throwing away groups. Not being
-root here happens only in some unusual configurations. We just ignore the
-error. */
+since you have to be root to run it, even if throwing away groups.
+Except, sigh, for Hurd - where you can.
+Not being root here happens only in some unusual configurations. */
-if (setgroups(0, NULL) != 0)
- {
- if (setgroups(1, group_list) != 0 && !unprivileged)
- {
- fprintf(stderr, "exim: setgroups() failed: %s\n", strerror(errno));
- exit(EXIT_FAILURE);
- }
- }
+if ( !unprivileged
+#ifndef OS_SETGROUPS_ZERO_DROPS_ALL
+ && setgroups(0, NULL) != 0
+#endif
+ && setgroups(1, group_list) != 0)
+ exim_fail("exim: setgroups() failed: %s\n", strerror(errno));
/* If the configuration file name has been altered by an argument on the
command line (either a new file name or a macro definition) and the caller is
configuration file changes and macro definitions haven't happened. */
if (( /* EITHER */
- (!trusted_config || /* Config changed, or */
+ (!f.trusted_config || /* Config changed, or */
!macros_trusted(opt_D_used)) && /* impermissible macros and */
real_uid != root_uid && /* Not root, and */
- !running_in_test_harness /* Not fudged */
+ !f.running_in_test_harness /* Not fudged */
) || /* OR */
expansion_test /* expansion testing */
|| /* OR */
Note that if the invoker is Exim, the logs remain available. Messing with
this causes unlogged successful deliveries. */
- if ((log_stderr != NULL) && (real_uid != exim_uid))
- really_exim = FALSE;
+ if (log_stderr && real_uid != exim_uid)
+ f.really_exim = FALSE;
}
/* Privilege is to be retained for the moment. It may be dropped later,
the real uid to the effective so that subsequent re-execs of Exim are done by a
privileged user. */
-else exim_setugid(geteuid(), getegid(), FALSE, US"forcing real = effective");
+else
+ exim_setugid(geteuid(), original_egid, FALSE, US"forcing real = effective");
/* If testing a filter, open the file(s) now, before wasting time doing other
setups and reading the message. */
-if ((filter_test & FTEST_SYSTEM) != 0)
- {
- filter_sfd = Uopen(filter_test_sfile, O_RDONLY, 0);
- if (filter_sfd < 0)
- {
- fprintf(stderr, "exim: failed to open %s: %s\n", filter_test_sfile,
+if (filter_test & FTEST_SYSTEM)
+ if ((filter_sfd = Uopen(filter_test_sfile, O_RDONLY, 0)) < 0)
+ exim_fail("exim: failed to open %s: %s\n", filter_test_sfile,
strerror(errno));
- return EXIT_FAILURE;
- }
- }
-if ((filter_test & FTEST_USER) != 0)
- {
- filter_ufd = Uopen(filter_test_ufile, O_RDONLY, 0);
- if (filter_ufd < 0)
- {
- fprintf(stderr, "exim: failed to open %s: %s\n", filter_test_ufile,
+if (filter_test & FTEST_USER)
+ if ((filter_ufd = Uopen(filter_test_ufile, O_RDONLY, 0)) < 0)
+ exim_fail("exim: failed to open %s: %s\n", filter_test_ufile,
strerror(errno));
- return EXIT_FAILURE;
- }
- }
/* Initialise lookup_list
If debugging, already called above via version reporting.
This needs to happen before we read the main configuration. */
init_lookup_list();
+/*XXX this excrescence could move to the testsuite standard config setup file */
#ifdef SUPPORT_I18N
-if (running_in_test_harness) smtputf8_advertise_hosts = NULL;
+if (f.running_in_test_harness) smtputf8_advertise_hosts = NULL;
#endif
/* Read the main runtime configuration data; this gives up if there
is a failure. It leaves the configuration file open so that the subsequent
configuration data for delivery can be read if needed.
-NOTE: immediatly after opening the configuration file we change the working
+NOTE: immediately after opening the configuration file we change the working
directory to "/"! Later we change to $spool_directory. We do it there, because
during readconf_main() some expansion takes place already. */
-/* Store the initial cwd before we change directories */
-if ((initial_cwd = os_getcwd(NULL, 0)) == NULL)
- {
- perror("exim: can't get the current working directory");
- exit(EXIT_FAILURE);
- }
+/* Store the initial cwd before we change directories. Can be NULL if the
+dir has already been unlinked. */
+initial_cwd = os_getcwd(NULL, 0);
+if (!initial_cwd && errno)
+ exim_fail("exim: getting initial cwd failed: %s\n", strerror(errno));
+
+if (initial_cwd && (strlen(CCS initial_cwd) >= BIG_BUFFER_SIZE))
+ exim_fail("exim: initial cwd is far too long (%d)\n", Ustrlen(CCS initial_cwd));
/* checking:
-be[m] expansion test -
issues (currently about tls_advertise_hosts and keep_environment not being
defined) */
-readconf_main(checking || list_options);
+ {
+ int old_pool = store_pool;
+#ifdef MEASURE_TIMING
+ struct timeval t0;
+ (void)gettimeofday(&t0, NULL);
+#endif
+
+ store_pool = POOL_CONFIG;
+ readconf_main(checking || list_options);
+ store_pool = old_pool;
-if (builtin_macros_create_trigger) DEBUG(D_any)
- debug_printf("Builtin macros created (expensive) due to config line '%.*s'\n",
- Ustrlen(builtin_macros_create_trigger)-1, builtin_macros_create_trigger);
+#ifdef MEASURE_TIMING
+ report_time_since(&t0, US"readconf_main (delta)");
+#endif
+ }
/* Now in directory "/" */
for later interrogation. */
if (real_uid == root_uid || real_uid == exim_uid || real_gid == exim_gid)
- admin_user = TRUE;
+ f.admin_user = TRUE;
else
- {
- int i, j;
- for (i = 0; i < group_count && !admin_user; i++)
+ for (int i = 0; i < group_count && !f.admin_user; i++)
if (group_list[i] == exim_gid)
- admin_user = TRUE;
+ f.admin_user = TRUE;
else if (admin_groups)
- for (j = 1; j <= (int)admin_groups[0] && !admin_user; j++)
+ for (int j = 1; j <= (int)admin_groups[0] && !f.admin_user; j++)
if (admin_groups[j] == group_list[i])
- admin_user = TRUE;
- }
+ f.admin_user = TRUE;
/* Another group of privileged users are the trusted users. These are root,
exim, and any caller matching trusted_users or trusted_groups. Trusted callers
other message parameters as well. */
if (real_uid == root_uid || real_uid == exim_uid)
- trusted_caller = TRUE;
+ f.trusted_caller = TRUE;
else
{
- int i, j;
-
if (trusted_users)
- for (i = 1; i <= (int)trusted_users[0] && !trusted_caller; i++)
+ for (int i = 1; i <= (int)trusted_users[0] && !f.trusted_caller; i++)
if (trusted_users[i] == real_uid)
- trusted_caller = TRUE;
+ f.trusted_caller = TRUE;
if (trusted_groups)
- for (i = 1; i <= (int)trusted_groups[0] && !trusted_caller; i++)
+ for (int i = 1; i <= (int)trusted_groups[0] && !f.trusted_caller; i++)
if (trusted_groups[i] == real_gid)
- trusted_caller = TRUE;
- else for (j = 0; j < group_count && !trusted_caller; j++)
+ f.trusted_caller = TRUE;
+ else for (int j = 0; j < group_count && !f.trusted_caller; j++)
if (trusted_groups[i] == group_list[j])
- trusted_caller = TRUE;
+ f.trusted_caller = TRUE;
}
/* At this point, we know if the user is privileged and some command-line
-options become possibly imperssible, depending upon the configuration file. */
+options become possibly impermissible, depending upon the configuration file. */
-if (checking && commandline_checks_require_admin && !admin_user) {
- fprintf(stderr, "exim: those command-line flags are set to require admin\n");
- exit(EXIT_FAILURE);
-}
+if (checking && commandline_checks_require_admin && !f.admin_user)
+ exim_fail("exim: those command-line flags are set to require admin\n");
/* Handle the decoding of logging options. */
DEBUG(D_any)
{
- int i;
debug_printf("configuration file is %s\n", config_main_filename);
debug_printf("log selectors =");
- for (i = 0; i < log_selector_size; i++)
+ for (int i = 0; i < log_selector_size; i++)
debug_printf(" %08x", log_selector[i]);
debug_printf("\n");
}
/* If domain literals are not allowed, check the sender address that was
supplied with -f. Ditto for a stripped trailing dot. */
-if (sender_address != NULL)
+if (sender_address)
{
if (sender_address[sender_address_domain] == '[' && !allow_domain_literals)
- {
- fprintf(stderr, "exim: bad -f address \"%s\": domain literals not "
+ exim_fail("exim: bad -f address \"%s\": domain literals not "
"allowed\n", sender_address);
- return EXIT_FAILURE;
- }
if (f_end_dot && !strip_trailing_dot)
- {
- fprintf(stderr, "exim: bad -f address \"%s.\": domain is malformed "
+ exim_fail("exim: bad -f address \"%s.\": domain is malformed "
"(trailing dot not allowed)\n", sender_address);
- return EXIT_FAILURE;
- }
}
/* See if an admin user overrode our logging. */
-if (cmdline_syslog_name != NULL)
- {
- if (admin_user)
+if (cmdline_syslog_name)
+ if (f.admin_user)
{
syslog_processname = cmdline_syslog_name;
log_file_path = string_copy(CUS"syslog");
}
else
- {
/* not a panic, non-privileged users should not be able to spam paniclog */
- fprintf(stderr,
+ exim_fail(
"exim: you lack sufficient privilege to specify syslog process name\n");
- return EXIT_FAILURE;
- }
- }
/* Paranoia check of maximum lengths of certain strings. There is a check
on the length of the log file path in log.c, which will come into effect
"syslog_processname is longer than 32 chars: aborting");
if (log_oneline)
- if (admin_user)
+ if (f.admin_user)
{
log_write(0, LOG_MAIN, "%s", log_oneline);
return EXIT_SUCCESS;
*/
#ifdef EXIM_TMPDIR
- {
- uschar **p;
- if (environ) for (p = USS environ; *p; p++)
+ if (environ) for (uschar ** p = USS environ; *p; p++)
if (Ustrncmp(*p, "TMPDIR=", 7) == 0 && Ustrcmp(*p+7, EXIM_TMPDIR) != 0)
{
uschar * newp = store_malloc(Ustrlen(EXIM_TMPDIR) + 8);
*p = newp;
DEBUG(D_any) debug_printf("reset TMPDIR=%s in environment\n", EXIM_TMPDIR);
}
- }
#endif
/* Timezone handling. If timezone_string is "utc", set a flag to cause all
timestamps_utc is set, because then all times are in UTC anyway. */
if (timezone_string && strcmpic(timezone_string, US"UTC") == 0)
- timestamps_utc = TRUE;
+ f.timestamps_utc = TRUE;
else
{
uschar *envtz = US getenv("TZ");
trusted configuration file (when deliver_drop_privilege is false). */
if ( removed_privilege
- && (!trusted_config || opt_D_used)
+ && (!f.trusted_config || opt_D_used)
&& real_uid == exim_uid)
if (deliver_drop_privilege)
- really_exim = TRUE; /* let logging work normally */
+ f.really_exim = TRUE; /* let logging work normally */
else
log_write(0, LOG_MAIN|LOG_PANIC,
"exim user lost privilege for using %s option",
- trusted_config? "-D" : "-C");
+ f.trusted_config? "-D" : "-C");
/* Start up Perl interpreter if Perl support is configured and there is a
perl_startup option, and the configuration or the command line specifies
{
uschar *errstr;
DEBUG(D_any) debug_printf("Starting Perl interpreter\n");
- errstr = init_perl(opt_perl_startup);
- if (errstr != NULL)
- {
- fprintf(stderr, "exim: error in perl_startup code: %s\n", errstr);
- return EXIT_FAILURE;
- }
+ if ((errstr = init_perl(opt_perl_startup)))
+ exim_fail("exim: error in perl_startup code: %s\n", errstr);
opt_perl_started = TRUE;
}
#endif /* EXIM_PERL */
Don't attempt it if logging is disabled, or if listing variables or if
verifying/testing addresses or expansions. */
-if (((debug_selector & D_any) != 0 || LOGGING(arguments))
- && really_exim && !list_options && !checking)
+if ( (debug_selector & D_any || LOGGING(arguments))
+ && f.really_exim && !list_options && !checking)
{
- int i;
uschar *p = big_buffer;
- Ustrcpy(p, "cwd= (failed)");
+ Ustrcpy(p, US"cwd= (failed)");
- Ustrncpy(p + 4, initial_cwd, big_buffer_size-5);
+ if (!initial_cwd)
+ p += 13;
+ else
+ {
+ p += 4;
+ snprintf(CS p, big_buffer_size - (p - big_buffer), "%s", CCS initial_cwd);
+ p += Ustrlen(CCS p);
+ }
- while (*p) p++;
(void)string_format(p, big_buffer_size - (p - big_buffer), " %d args:", argc);
while (*p) p++;
- for (i = 0; i < argc; i++)
+ for (int i = 0; i < argc; i++)
{
int len = Ustrlen(argv[i]);
const uschar *printing;
uschar *quote;
if (p + len + 8 >= big_buffer + big_buffer_size)
{
- Ustrcpy(p, " ...");
+ Ustrcpy(p, US" ...");
log_write(0, LOG_MAIN, "%s", big_buffer);
- Ustrcpy(big_buffer, "...");
+ Ustrcpy(big_buffer, US"...");
p = big_buffer + 3;
}
printing = string_printing(argv[i]);
- if (printing[0] == 0) quote = US"\""; else
+ if (!*printing) quote = US"\"";
+ else
{
const uschar *pp = printing;
quote = US"";
- while (*pp != 0) if (isspace(*pp++)) { quote = US"\""; break; }
+ while (*pp) if (isspace(*pp++)) { quote = US"\""; break; }
}
p += sprintf(CS p, " %s%.*s%s", quote, (int)(big_buffer_size -
(p - big_buffer) - 4), printing, quote);
if (Uchdir(spool_directory) != 0)
{
- int dummy;
- (void)directory_make(spool_directory, US"", SPOOL_DIRECTORY_MODE, FALSE);
- dummy = /* quieten compiler */ Uchdir(spool_directory);
- dummy = dummy; /* yet more compiler quietening, sigh */
+ (void) directory_make(spool_directory, US"", SPOOL_DIRECTORY_MODE, FALSE);
+ (void) Uchdir(spool_directory);
}
/* Handle calls with the -bi option. This is a sendmail option to rebuild *the*
if (bi_option)
{
- (void)fclose(config_file);
- if (bi_command != NULL)
+ (void) fclose(config_file);
+ if (bi_command && *bi_command)
{
int i = 0;
uschar *argv[3];
- argv[i++] = bi_command;
- if (alias_arg != NULL) argv[i++] = alias_arg;
+ argv[i++] = bi_command; /* nonexpanded option so assume untainted */
+ if (alias_arg) argv[i++] = alias_arg;
argv[i++] = NULL;
setgroups(group_count, group_list);
exim_setugid(real_uid, real_gid, FALSE, US"running bi_command");
- DEBUG(D_exec) debug_printf("exec %.256s %.256s\n", argv[0],
- (argv[1] == NULL)? US"" : argv[1]);
+ DEBUG(D_exec) debug_printf("exec '%.256s' %s%.256s%s\n", argv[0],
+ argv[1] ? "'" : "", argv[1] ? argv[1] : US"", argv[1] ? "'" : "");
execv(CS argv[0], (char *const *)argv);
- fprintf(stderr, "exim: exec failed: %s\n", strerror(errno));
- exit(EXIT_FAILURE);
+ exim_fail("exim: exec '%s' failed: %s\n", argv[0], strerror(errno));
}
else
{
configuration file. We leave these prints here to ensure that syslog setup,
logfile setup, and so on has already happened. */
-if (trusted_caller) DEBUG(D_any) debug_printf("trusted user\n");
-if (admin_user) DEBUG(D_any) debug_printf("admin user\n");
+if (f.trusted_caller) DEBUG(D_any) debug_printf("trusted user\n");
+if (f.admin_user) DEBUG(D_any) debug_printf("admin user\n");
/* Only an admin user may start the daemon or force a queue run in the default
configuration, but the queue run restriction can be relaxed. Only an admin
count. Only an admin user can use the test interface to scan for email
(because Exim will be in the spool dir and able to look at mails). */
-if (!admin_user)
+if (!f.admin_user)
{
BOOL debugset = (debug_selector & ~D_v) != 0;
- if (deliver_give_up || daemon_listen || malware_test_file ||
- (count_queue && queue_list_requires_admin) ||
- (list_queue && queue_list_requires_admin) ||
- (queue_interval >= 0 && prod_requires_admin) ||
- (debugset && !running_in_test_harness))
- {
- fprintf(stderr, "exim:%s permission denied\n", debugset? " debugging" : "");
- exit(EXIT_FAILURE);
- }
+ if ( deliver_give_up || f.daemon_listen || malware_test_file
+ || count_queue && queue_list_requires_admin
+ || list_queue && queue_list_requires_admin
+ || queue_interval >= 0 && prod_requires_admin
+ || queue_name_dest && prod_requires_admin
+ || debugset && !f.running_in_test_harness
+ )
+ exim_fail("exim:%s permission denied\n", debugset ? " debugging" : "");
}
/* If the real user is not root or the exim uid, the argument for passing
one that supplied an input message, or we are using a patched exim for
regression testing. */
-if (real_uid != root_uid && real_uid != exim_uid &&
- (continue_hostname != NULL ||
- (dont_deliver &&
- (queue_interval >= 0 || daemon_listen || msg_action_arg > 0)
- )) && !running_in_test_harness)
- {
- fprintf(stderr, "exim: Permission denied\n");
- return EXIT_FAILURE;
- }
+if ( real_uid != root_uid && real_uid != exim_uid
+ && ( continue_hostname
+ || ( f.dont_deliver
+ && (queue_interval >= 0 || f.daemon_listen || msg_action_arg > 0)
+ ) )
+ && !f.running_in_test_harness
+ )
+ exim_fail("exim: Permission denied\n");
/* If the caller is not trusted, certain arguments are ignored when running for
real, but are permitted when checking things (-be, -bv, -bt, -bh, -bf, -bF).
Note that authority for performing certain actions on messages is tested in the
queue_action() function. */
-if (!trusted_caller && !checking)
+if (!f.trusted_caller && !checking)
{
sender_host_name = sender_host_address = interface_address =
sender_ident = received_protocol = NULL;
else
{
- if (sender_host_address != NULL)
+ if (sender_host_address)
sender_host_port = check_port(sender_host_address);
- if (interface_address != NULL)
+ if (interface_address)
interface_port = check_port(interface_address);
}
/* If the caller is trusted, then they can use -G to suppress_local_fixups. */
if (flag_G)
{
- if (trusted_caller)
+ if (f.trusted_caller)
{
- suppress_local_fixups = suppress_local_fixups_default = TRUE;
+ f.suppress_local_fixups = f.suppress_local_fixups_default = TRUE;
DEBUG(D_acl) debug_printf("suppress_local_fixups forced on by -G\n");
}
else
- {
- fprintf(stderr, "exim: permission denied (-G requires a trusted user)\n");
- return EXIT_FAILURE;
- }
+ exim_fail("exim: permission denied (-G requires a trusted user)\n");
}
/* If an SMTP message is being received check to see if the standard input is a
if (real_uid == root_uid || real_uid == exim_uid || interface_port < 1024)
{
- is_inetd = TRUE;
+ f.is_inetd = TRUE;
sender_host_address = host_ntoa(-1, (struct sockaddr *)(&inetd_sock),
NULL, &sender_host_port);
if (mua_wrapper) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Input from "
"inetd is not supported when mua_wrapper is set");
}
else
- {
- fprintf(stderr,
+ exim_fail(
"exim: Permission denied (unprivileged user, unprivileged port)\n");
- return EXIT_FAILURE;
- }
}
}
}
root. There will be further calls later for each message received. */
#ifdef LOAD_AVG_NEEDS_ROOT
-if (receiving_message &&
- (queue_only_load >= 0 ||
- (is_inetd && smtp_load_reserve >= 0)
- ))
- {
+if ( receiving_message
+ && (queue_only_load >= 0 || (f.is_inetd && smtp_load_reserve >= 0)))
load_average = OS_GETLOADAVG();
- }
#endif
/* The queue_only configuration option can be overridden by -odx on the command
situation (controlled by the TRUE below), in order to be as close as possible
to the state Exim usually runs in. */
-if (!unprivileged && /* originally had root AND */
- !removed_privilege && /* still got root AND */
- !daemon_listen && /* not starting the daemon */
- queue_interval <= 0 && /* (either kind of daemon) */
- ( /* AND EITHER */
- deliver_drop_privilege || /* requested unprivileged */
- ( /* OR */
- queue_interval < 0 && /* not running the queue */
- (msg_action_arg < 0 || /* and */
- msg_action != MSG_DELIVER) && /* not delivering and */
- (!checking || !address_test_mode) /* not address checking */
- ) ) )
+if ( !unprivileged /* originally had root AND */
+ && !removed_privilege /* still got root AND */
+ && !f.daemon_listen /* not starting the daemon */
+ && queue_interval <= 0 /* (either kind of daemon) */
+ && ( /* AND EITHER */
+ deliver_drop_privilege /* requested unprivileged */
+ || ( /* OR */
+ queue_interval < 0 /* not running the queue */
+ && ( msg_action_arg < 0 /* and */
+ || msg_action != MSG_DELIVER /* not delivering */
+ ) /* and */
+ && (!checking || !f.address_test_mode) /* not address checking */
+ && !rcpt_verify_quota /* and not quota checking */
+ ) ) )
exim_setugid(exim_uid, exim_gid, TRUE, US"privilege not needed");
/* When we are retaining a privileged uid, we still change to the exim gid. */
else
{
int rv;
+ DEBUG(D_any) debug_printf("dropping to exim gid; retaining priv uid\n");
rv = setgid(exim_gid);
/* Impact of failure is that some stuff might end up with an incorrect group.
We track this for failures from root, since any attempt to change privilege
no need to complain then. */
if (rv == -1)
if (!(unprivileged || removed_privilege))
- {
- fprintf(stderr,
- "exim: changing group failed: %s\n", strerror(errno));
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: changing group failed: %s\n", strerror(errno));
else
+ {
DEBUG(D_any) debug_printf("changing group to %ld failed: %s\n",
(long int)exim_gid, strerror(errno));
+ }
}
/* Handle a request to scan a file for malware */
#ifdef WITH_CONTENT_SCAN
int result;
set_process_info("scanning file for malware");
- result = malware_in_file(malware_test_file);
- if (result == FAIL)
+ if ((result = malware_in_file(malware_test_file)) == FAIL)
{
printf("No malware found.\n");
exit(EXIT_SUCCESS);
if (count_queue)
{
set_process_info("counting the queue");
- queue_count();
+ fprintf(stdout, "%u\n", queue_count());
exit(EXIT_SUCCESS);
}
int yield = EXIT_SUCCESS;
set_process_info("acting on specified messages");
+ /* ACL definitions may be needed when removing a message (-Mrm) because
+ event_action gets expanded */
+
+ if (msg_action == MSG_REMOVE)
+ {
+ int old_pool = store_pool;
+ store_pool = POOL_CONFIG;
+ readconf_rest();
+ store_pool = old_pool;
+ store_writeprotect(POOL_CONFIG);
+ }
+
if (!one_msg_action)
{
for (i = msg_action_arg; i < argc; i++)
if (!queue_action(argv[i], msg_action, NULL, 0, 0))
yield = EXIT_FAILURE;
+ switch (msg_action)
+ {
+ case MSG_REMOVE: case MSG_FREEZE: case MSG_THAW: break;
+ default: printf("\n"); break;
+ }
}
else if (!queue_action(argv[msg_action_arg], msg_action, argv, argc,
}
/* We used to set up here to skip reading the ACL section, on
- (msg_action_arg > 0 || (queue_interval == 0 && !daemon_listen)
+ (msg_action_arg > 0 || (queue_interval == 0 && !f.daemon_listen)
Now, since the intro of the ${acl } expansion, ACL definitions may be
needed in transports so we lost the optimisation. */
-readconf_rest();
+ {
+ int old_pool = store_pool;
+#ifdef MEASURE_TIMING
+ struct timeval t0;
+ (void)gettimeofday(&t0, NULL);
+#endif
-/* The configuration data will have been read into POOL_PERM because we won't
-ever want to reset back past it. Change the current pool to POOL_MAIN. In fact,
-this is just a bit of pedantic tidiness. It wouldn't really matter if the
-configuration were read into POOL_MAIN, because we don't do any resets till
-later on. However, it seems right, and it does ensure that both pools get used.
-*/
+ store_pool = POOL_CONFIG;
+ readconf_rest();
+ store_pool = old_pool;
+
+ /* -be can add macro definitions, needing to link to the macro structure
+ chain. Otherwise, make the memory used for config data readonly. */
+
+ if (!expansion_test)
+ store_writeprotect(POOL_CONFIG);
+
+#ifdef MEASURE_TIMING
+ report_time_since(&t0, US"readconf_rest (delta)");
+#endif
+ }
-store_pool = POOL_MAIN;
+/* Handle a request to check quota */
+if (rcpt_verify_quota)
+ if (real_uid != root_uid && real_uid != exim_uid)
+ exim_fail("exim: Permission denied\n");
+ else if (recipients_arg >= argc)
+ exim_fail("exim: missing recipient for quota check\n");
+ else
+ {
+ verify_quota(argv[recipients_arg]);
+ exim_exit(EXIT_SUCCESS);
+ }
/* Handle the -brt option. This is for checking out retry configurations.
The next three arguments are a domain name or a complete address, and
retry_config *yield;
int basic_errno = 0;
int more_errno = 0;
- uschar *s1, *s2;
+ const uschar *s1, *s2;
if (test_retry_arg >= argc)
{
printf("-brt needs a domain or address argument\n");
- exim_exit(EXIT_FAILURE, US"main");
+ exim_exit(EXIT_FAILURE);
}
- s1 = argv[test_retry_arg++];
+ s1 = exim_str_fail_toolong(argv[test_retry_arg++], EXIM_EMAILADDR_MAX, "-brt");
s2 = NULL;
/* If the first argument contains no @ and no . it might be a local user
/* There may be an optional second domain arg. */
if (test_retry_arg < argc && Ustrchr(argv[test_retry_arg], '.') != NULL)
- s2 = argv[test_retry_arg++];
+ s2 = exim_str_fail_toolong(argv[test_retry_arg++], EXIM_DOMAINNAME_MAX, "-brt 2nd");
/* The final arg is an error name */
if (test_retry_arg < argc)
{
- uschar *ss = argv[test_retry_arg];
+ const uschar *ss = exim_str_fail_toolong(argv[test_retry_arg], EXIM_DRIVERNAME_MAX, "-brt 3rd");
uschar *error =
readconf_retry_error(ss, ss + Ustrlen(ss), &basic_errno, &more_errno);
if (error != NULL)
printf("No retry information found\n");
else
{
- retry_rule *r;
more_errno = yield->more_errno;
printf("Retry rule: %s ", yield->pattern);
printf("auth_failed ");
else printf("* ");
- for (r = yield->rules; r; r = r->next)
+ for (retry_rule * r = yield->rules; r; r = r->next)
{
printf("%c,%s", r->rule, readconf_printtime(r->timeout)); /* Do not */
printf(",%s", readconf_printtime(r->p1)); /* amalgamate */
printf("\n");
}
- exim_exit(EXIT_SUCCESS, US"main");
+ exim_exit(EXIT_SUCCESS);
}
/* Handle a request to list one or more configuration options */
if (list_options)
{
+ BOOL fail = FALSE;
set_process_info("listing variables");
- if (recipients_arg >= argc) readconf_print(US"all", NULL, flag_n);
- else for (i = recipients_arg; i < argc; i++)
+ if (recipients_arg >= argc)
+ fail = !readconf_print(US"all", NULL, flag_n);
+ else for (i = recipients_arg; i < argc; i++)
+ {
+ if (i < argc - 1 &&
+ (Ustrcmp(argv[i], "router") == 0 ||
+ Ustrcmp(argv[i], "transport") == 0 ||
+ Ustrcmp(argv[i], "authenticator") == 0 ||
+ Ustrcmp(argv[i], "macro") == 0 ||
+ Ustrcmp(argv[i], "environment") == 0))
{
- if (i < argc - 1 &&
- (Ustrcmp(argv[i], "router") == 0 ||
- Ustrcmp(argv[i], "transport") == 0 ||
- Ustrcmp(argv[i], "authenticator") == 0 ||
- Ustrcmp(argv[i], "macro") == 0 ||
- Ustrcmp(argv[i], "environment") == 0))
- {
- readconf_print(argv[i+1], argv[i], flag_n);
- i++;
- }
- else readconf_print(argv[i], NULL, flag_n);
+ fail |= !readconf_print(exim_str_fail_toolong(argv[i+1], EXIM_DRIVERNAME_MAX, "-bP name"), argv[i], flag_n);
+ i++;
}
- exim_exit(EXIT_SUCCESS, US"main");
+ else
+ fail = !readconf_print(exim_str_fail_toolong(argv[i], EXIM_DRIVERNAME_MAX, "-bP item"), NULL, flag_n);
+ }
+ exim_exit(fail ? EXIT_FAILURE : EXIT_SUCCESS);
}
if (list_config)
{
set_process_info("listing config");
- readconf_print(US"config", NULL, flag_n);
- exim_exit(EXIT_SUCCESS, US"main");
+ exim_exit(readconf_print(US"config", NULL, flag_n)
+ ? EXIT_SUCCESS : EXIT_FAILURE);
}
-/* Initialise subsystems as required */
-#ifndef DISABLE_DKIM
-dkim_exim_init();
-#endif
-deliver_init();
+/* Initialise subsystems as required. */
+tcp_init();
/* Handle a request to deliver one or more messages that are already on the
queue. Values of msg_action other than MSG_DELIVER and MSG_LOAD are dealt with
if (msg_action_arg > 0 && msg_action != MSG_LOAD)
{
- if (prod_requires_admin && !admin_user)
+ if (prod_requires_admin && !f.admin_user)
{
fprintf(stderr, "exim: Permission denied\n");
- exim_exit(EXIT_FAILURE, US"main");
+ exim_exit(EXIT_FAILURE);
}
set_process_info("delivering specified messages");
- if (deliver_give_up) forced_delivery = deliver_force_thaw = TRUE;
+ if (deliver_give_up) forced_delivery = f.deliver_force_thaw = TRUE;
for (i = msg_action_arg; i < argc; i++)
{
int status;
pid_t pid;
+ /*XXX This use of argv[i] for msg_id should really be tainted, but doing
+ that runs into a later copy into the untainted global message_id[] */
+ /*XXX Do we need a length limit check here? */
if (i == argc - 1)
(void)deliver_message(argv[i], forced_delivery, deliver_give_up);
- else if ((pid = fork()) == 0)
+ else if ((pid = exim_fork(US"cmdline-delivery")) == 0)
{
(void)deliver_message(argv[i], forced_delivery, deliver_give_up);
- _exit(EXIT_SUCCESS);
+ exim_underbar_exit(EXIT_SUCCESS);
}
else if (pid < 0)
{
fprintf(stderr, "failed to fork delivery process for %s: %s\n", argv[i],
strerror(errno));
- exim_exit(EXIT_FAILURE, US"main");
+ exim_exit(EXIT_FAILURE);
}
else wait(&status);
}
- exim_exit(EXIT_SUCCESS, US"main");
+ exim_exit(EXIT_SUCCESS);
}
/* If only a single queue run is requested, without SMTP listening, we can just
turn into a queue runner, with an optional starting message id. */
-if (queue_interval == 0 && !daemon_listen)
+if (queue_interval == 0 && !f.daemon_listen)
{
DEBUG(D_queue_run) debug_printf("Single queue run%s%s%s%s\n",
- (start_queue_run_id == NULL)? US"" : US" starting at ",
- (start_queue_run_id == NULL)? US"" : start_queue_run_id,
- (stop_queue_run_id == NULL)? US"" : US" stopping at ",
- (stop_queue_run_id == NULL)? US"" : stop_queue_run_id);
+ start_queue_run_id ? US" starting at " : US"",
+ start_queue_run_id ? start_queue_run_id: US"",
+ stop_queue_run_id ? US" stopping at " : US"",
+ stop_queue_run_id ? stop_queue_run_id : US"");
if (*queue_name)
set_process_info("running the '%s' queue (single queue run)", queue_name);
else
set_process_info("running the queue (single queue run)");
queue_run(start_queue_run_id, stop_queue_run_id, FALSE);
- exim_exit(EXIT_SUCCESS, US"main");
+ exim_exit(EXIT_SUCCESS);
}
if (!originator_name)
{
- if (!sender_address || (!trusted_caller && filter_test == FTEST_NONE))
+ if (!sender_address || (!f.trusted_caller && filter_test == FTEST_NONE))
{
uschar *name = US pw->pw_gecos;
uschar *amp = Ustrchr(name, '&');
if (gecos_pattern && gecos_name)
{
- const pcre *re;
- re = regex_must_compile(gecos_pattern, FALSE, TRUE); /* Use malloc */
+ const pcre2_code *re;
+ re = regex_must_compile(gecos_pattern, MCS_NOFLAGS, TRUE); /* Use malloc */
if (regex_match_and_setup(re, name, 0, -1))
{
configuration specifies something to use. When running in the test harness,
any setting of unknown_login overrides the actual name. */
-if (originator_login == NULL || running_in_test_harness)
+if (!originator_login || f.running_in_test_harness)
{
- if (unknown_login != NULL)
+ if (unknown_login)
{
originator_login = expand_string(unknown_login);
- if (originator_name == NULL && unknown_username != NULL)
+ if (!originator_name && unknown_username)
originator_name = expand_string(unknown_username);
- if (originator_name == NULL) originator_name = US"";
+ if (!originator_name) originator_name = US"";
}
- if (originator_login == NULL)
+ if (!originator_login)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Failed to get user name for uid %d",
(int)real_uid);
}
/* Ensure that the user name is in a suitable form for use as a "phrase" in an
RFC822 address.*/
-originator_name = string_copy(parse_fix_phrase(originator_name,
- Ustrlen(originator_name), big_buffer, big_buffer_size));
+originator_name = US parse_fix_phrase(originator_name, Ustrlen(originator_name));
/* If a message is created by this call of Exim, the uid/gid of its originator
are those of the caller. These values are overridden if an existing message is
for incoming messages via the daemon. The daemon cannot be run in mua_wrapper
mode. */
-if (daemon_listen || inetd_wait_mode || queue_interval > 0)
+if (f.daemon_listen || f.inetd_wait_mode || queue_interval > 0)
{
if (mua_wrapper)
{
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Daemon cannot be run when "
"mua_wrapper is set");
}
+
+# ifndef DISABLE_TLS
+ /* This also checks that the library linkage is working and we can call
+ routines in it, so call even if tls_require_ciphers is unset */
+ {
+# ifdef MEASURE_TIMING
+ struct timeval t0;
+ (void)gettimeofday(&t0, NULL);
+# endif
+ if (!tls_dropprivs_validate_require_cipher(FALSE))
+ exit(1);
+# ifdef MEASURE_TIMING
+ report_time_since(&t0, US"validate_ciphers (delta)");
+# endif
+ }
+#endif
+
daemon_go();
}
the caller. This will get overwritten below for an inetd call. If a trusted
caller has set it empty, unset it. */
-if (sender_ident == NULL) sender_ident = originator_login;
- else if (sender_ident[0] == 0) sender_ident = NULL;
+if (!sender_ident) sender_ident = originator_login;
+else if (!*sender_ident) sender_ident = NULL;
/* Handle the -brw option, which is for checking out rewriting rules. Cause log
writes (on errors) to go to stderr instead. Can't do this earlier, as want the
if (test_rewrite_arg >= 0)
{
- really_exim = FALSE;
+ f.really_exim = FALSE;
if (test_rewrite_arg >= argc)
{
printf("-brw needs an address argument\n");
- exim_exit(EXIT_FAILURE, US"main");
+ exim_exit(EXIT_FAILURE);
}
- rewrite_test(argv[test_rewrite_arg]);
- exim_exit(EXIT_SUCCESS, US"main");
+ rewrite_test(exim_str_fail_toolong(argv[test_rewrite_arg], EXIM_EMAILADDR_MAX, "-brw"));
+ exim_exit(EXIT_SUCCESS);
}
/* A locally-supplied message is considered to be coming from a local user
unless a trusted caller supplies a sender address with -f, or is passing in the
message via SMTP (inetd invocation or otherwise). */
-if ((sender_address == NULL && !smtp_input) ||
- (!trusted_caller && filter_test == FTEST_NONE))
+if ( !sender_address && !smtp_input
+ || !f.trusted_caller && filter_test == FTEST_NONE)
{
- sender_local = TRUE;
+ f.sender_local = TRUE;
/* A trusted caller can supply authenticated_sender and authenticated_id
via -oMas and -oMai and if so, they will already be set. Otherwise, force
defaults except when host checking. */
- if (authenticated_sender == NULL && !host_checking)
+ if (!authenticated_sender && !host_checking)
authenticated_sender = string_sprintf("%s@%s", originator_login,
qualify_domain_sender);
- if (authenticated_id == NULL && !host_checking)
+ if (!authenticated_id && !host_checking)
authenticated_id = originator_login;
}
specify a sender address for SMTP input, we leave sender_address unset. This
causes the MAIL commands to be honoured. */
-if ((!smtp_input && sender_address == NULL) ||
- !receive_check_set_sender(sender_address))
+if ( !smtp_input && !sender_address
+ || !receive_check_set_sender(sender_address))
{
/* Either the caller is not permitted to set a general sender, or this is
non-SMTP input and the trusted caller has not set a sender. If there is no
sender, or if a sender other than <> is set, override with the originator's
login (which will get qualified below), except when checking things. */
- if (sender_address == NULL /* No sender_address set */
- || /* OR */
+ if ( !sender_address /* No sender_address set */
+ || /* OR */
(sender_address[0] != 0 && /* Non-empty sender address, AND */
!checking)) /* Not running tests, including filter tests */
{
sender_address = originator_login;
- sender_address_forced = FALSE;
+ f.sender_address_forced = FALSE;
sender_address_domain = 0;
}
}
/* Remember whether an untrusted caller set the sender address */
-sender_set_untrusted = sender_address != originator_login && !trusted_caller;
+f.sender_set_untrusted = sender_address != originator_login && !f.trusted_caller;
/* Ensure that the sender address is fully qualified unless it is the empty
address, which indicates an error message, or doesn't exist (root caller, smtp
interface, no -f argument). */
-if (sender_address != NULL && sender_address[0] != 0 &&
- sender_address_domain == 0)
+if (sender_address && *sender_address && sender_address_domain == 0)
sender_address = string_sprintf("%s@%s", local_part_quote(sender_address),
qualify_domain_sender);
stdin. Set debug_level to at least D_v to get full output for address testing.
*/
-if (verify_address_mode || address_test_mode)
+if (verify_address_mode || f.address_test_mode)
{
int exit_value = 0;
int flags = vopt_qualify;
}
if (recipients_arg < argc)
- {
while (recipients_arg < argc)
{
- uschar *s = argv[recipients_arg++];
- while (*s != 0)
+ /* Supplied addresses are tainted since they come from a user */
+ uschar * s = string_copy_taint(
+ exim_str_fail_toolong(argv[recipients_arg++], EXIM_DISPLAYMAIL_MAX, "address verification"),
+ GET_TAINTED);
+ while (*s)
{
BOOL finished = FALSE;
uschar *ss = parse_find_address_end(s, FALSE);
test_address(s, flags, &exit_value);
s = ss;
if (!finished)
- while (*(++s) != 0 && (*s == ',' || isspace(*s)));
+ while (*++s == ',' || isspace(*s)) ;
}
}
- }
else for (;;)
{
- uschar *s = get_stdinput(NULL, NULL);
- if (s == NULL) break;
- test_address(s, flags, &exit_value);
+ uschar * s = get_stdinput(NULL, NULL);
+ if (!s) break;
+ test_address(string_copy_taint(
+ exim_str_fail_toolong(s, EXIM_DISPLAYMAIL_MAX, "address verification (stdin)"),
+ GET_TAINTED),
+ flags, &exit_value);
}
route_tidyup();
- exim_exit(exit_value, US"main");
+ exim_exit(exit_value);
}
/* Handle expansion checking. Either expand items on the command line, or read
dns_init(FALSE, FALSE, FALSE);
if (msg_action_arg > 0 && msg_action == MSG_LOAD)
{
- uschar spoolname[256]; /* Not big_buffer; used in spool_read_header() */
- if (!admin_user)
- {
- fprintf(stderr, "exim: permission denied\n");
- exit(EXIT_FAILURE);
- }
- message_id = argv[msg_action_arg];
- (void)string_format(spoolname, sizeof(spoolname), "%s-H", message_id);
+ uschar * spoolname;
+ if (!f.admin_user)
+ exim_fail("exim: permission denied\n");
+ message_id = US exim_str_fail_toolong(argv[msg_action_arg], MESSAGE_ID_LENGTH, "message-id");
+ /* Checking the length of the ID is sufficient to validate it.
+ Get an untainted version so file opens can be done. */
+ message_id = string_copy_taint(message_id, GET_UNTAINTED);
+
+ spoolname = string_sprintf("%s-H", message_id);
if ((deliver_datafile = spool_open_datafile(message_id)) < 0)
printf ("Failed to load message datafile %s\n", message_id);
if (spool_read_header(spoolname, TRUE, FALSE) != spool_read_OK)
/* Read a test message from a file. We fudge it up to be on stdin, saving
stdin itself for later reading of expansion strings. */
- else if (expansion_test_message != NULL)
+ else if (expansion_test_message)
{
int save_stdin = dup(0);
int fd = Uopen(expansion_test_message, O_RDONLY, 0);
if (fd < 0)
- {
- fprintf(stderr, "exim: failed to open %s: %s\n", expansion_test_message,
+ exim_fail("exim: failed to open %s: %s\n", expansion_test_message,
strerror(errno));
- return EXIT_FAILURE;
- }
(void) dup2(fd, 0);
filter_test = FTEST_USER; /* Fudge to make it look like filter test */
message_ended = END_NOTENDED;
clearerr(stdin); /* Required by Darwin */
}
+ /* Only admin users may see config-file macros this way */
+
+ if (!f.admin_user) macros_user = macros = mlast = NULL;
+
/* Allow $recipients for this testing */
- enable_dollar_recipients = TRUE;
+ f.enable_dollar_recipients = TRUE;
/* Expand command line items */
if (recipients_arg < argc)
- {
while (recipients_arg < argc)
- {
- uschar *s = argv[recipients_arg++];
- uschar *ss = expand_string(s);
- if (ss == NULL) printf ("Failed: %s\n", expand_string_message);
- else printf("%s\n", CS ss);
- }
- }
+ expansion_test_line(exim_str_fail_toolong(argv[recipients_arg++], EXIM_EMAILADDR_MAX, "recipient"));
/* Read stdin */
{
char *(*fn_readline)(const char *) = NULL;
void (*fn_addhist)(const char *) = NULL;
+ uschar * s;
- #ifdef USE_READLINE
+#ifdef USE_READLINE
void *dlhandle = set_readline(&fn_readline, &fn_addhist);
- #endif
+#endif
- for (;;)
- {
- uschar *ss;
- uschar *source = get_stdinput(fn_readline, fn_addhist);
- if (source == NULL) break;
- ss = expand_string(source);
- if (ss == NULL)
- printf ("Failed: %s\n", expand_string_message);
- else printf("%s\n", CS ss);
- }
+ while (s = get_stdinput(fn_readline, fn_addhist))
+ expansion_test_line(s);
- #ifdef USE_READLINE
- if (dlhandle != NULL) dlclose(dlhandle);
- #endif
+#ifdef USE_READLINE
+ if (dlhandle) dlclose(dlhandle);
+#endif
}
/* The data file will be open after -Mset */
deliver_datafile = -1;
}
- exim_exit(EXIT_SUCCESS, US"main");
+ exim_exit(EXIT_SUCCESS);
}
uschar *nah = expand_string(raw_active_hostname);
if (nah == NULL)
{
- if (!expand_string_forcedfail)
+ if (!f.expand_string_forcedfail)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to expand \"%s\" "
"(smtp_active_hostname): %s", raw_active_hostname,
expand_string_message);
if (!sender_ident_set)
{
sender_ident = NULL;
- if (running_in_test_harness && sender_host_port != 0 &&
- interface_address != NULL && interface_port != 0)
- verify_get_ident(1413);
+ if (f.running_in_test_harness && sender_host_port
+ && interface_address && interface_port)
+ verify_get_ident(1223); /* note hardwired port number */
}
/* In case the given address is a non-canonical IPv6 address, canonicalize
it. The code works for both IPv4 and IPv6, as it happens. */
size = host_aton(sender_host_address, x);
- sender_host_address = store_get(48); /* large enough for full IPv6 */
+ sender_host_address = store_get(48, GET_UNTAINTED); /* large enough for full IPv6 */
(void)host_nmtoa(size, x, -1, sender_host_address, ':');
/* Now set up for testing */
smtp_input = TRUE;
smtp_in = stdin;
smtp_out = stdout;
- sender_local = FALSE;
- sender_host_notsocket = TRUE;
+ f.sender_local = FALSE;
+ f.sender_host_notsocket = TRUE;
debug_file = stderr;
debug_fd = fileno(debug_file);
fprintf(stdout, "\n**** SMTP testing session as if from host %s\n"
memset(sender_host_cache, 0, sizeof(sender_host_cache));
if (verify_check_host(&hosts_connection_nolog) == OK)
+ {
BIT_CLEAR(log_selector, log_selector_size, Li_smtp_connection);
+ BIT_CLEAR(log_selector, log_selector_size, Li_smtp_no_mail);
+ }
log_write(L_smtp_connection, LOG_MAIN, "%s", smtp_get_connection_info());
/* NOTE: We do *not* call smtp_log_no_mail() if smtp_start_session() fails,
if (smtp_start_session())
{
- for (reset_point = store_get(0); ; store_reset(reset_point))
+ rmark reset_point;
+ for (; (reset_point = store_mark()); store_reset(reset_point))
{
if (smtp_setup_msg() <= 0) break;
if (!receive_msg(FALSE)) break;
deliver_localpart_orig = NULL;
deliver_domain_orig = NULL;
callout_address = sending_ip_address = NULL;
+ deliver_localpart_data = deliver_domain_data =
+ recipient_data = sender_data = NULL;
sender_rate = sender_rate_limit = sender_rate_period = NULL;
}
smtp_log_no_mail();
}
- exim_exit(EXIT_SUCCESS, US"main");
+ exim_exit(EXIT_SUCCESS);
}
{
if (version_printed)
{
+ if (Ustrchr(config_main_filelist, ':'))
+ printf("Configuration file search path is %s\n", config_main_filelist);
printf("Configuration file is %s\n", config_main_filename);
return EXIT_SUCCESS;
}
if (mua_wrapper)
{
- synchronous_delivery = TRUE;
+ f.synchronous_delivery = TRUE;
arg_error_handling = ERRORS_STDERR;
remote_max_parallel = 1;
deliver_drop_privilege = TRUE;
- queue_smtp = FALSE;
+ f.queue_smtp = FALSE;
queue_smtp_domains = NULL;
#ifdef SUPPORT_I18N
message_utf8_downconvert = -1; /* convert-if-needed */
logging being sent down the socket and make an identd call to get the
sender_ident. */
-else if (is_inetd)
+else if (f.is_inetd)
{
(void)fclose(stderr);
exim_nullstd(); /* Re-open to /dev/null */
case when it is forced by -oMa. However, we must flag that it isn't a socket,
so that the test for IP options is skipped for -bs input. */
-if (sender_host_address != NULL && sender_fullhost == NULL)
+if (sender_host_address && !sender_fullhost)
{
host_build_sender_fullhost();
set_process_info("handling incoming connection from %s via -oMa",
sender_fullhost);
- sender_host_notsocket = TRUE;
+ f.sender_host_notsocket = TRUE;
}
/* Otherwise, set the sender host as unknown except for inetd calls. This
prevents host checking in the case of -bs not from inetd and also for -bS. */
-else if (!is_inetd) sender_host_unknown = TRUE;
+else if (!f.is_inetd) f.sender_host_unknown = TRUE;
/* If stdout does not exist, then dup stdin to stdout. This can happen
if exim is started from inetd. In this case fd 0 will be set to the socket,
if (smtp_input)
{
- if (!is_inetd) set_process_info("accepting a local %sSMTP message from <%s>",
+ if (!f.is_inetd) set_process_info("accepting a local %sSMTP message from <%s>",
smtp_batched_input? "batched " : "",
- (sender_address!= NULL)? sender_address : originator_login);
+ sender_address ? sender_address : originator_login);
}
else
{
error code is given.) */
if ((!smtp_input || smtp_batched_input) && !receive_check_fs(0))
- {
- fprintf(stderr, "exim: insufficient disk space\n");
- return EXIT_FAILURE;
- }
+ exim_fail("exim: insufficient disk space\n");
/* If this is smtp input of any kind, real or batched, handle the start of the
SMTP session.
smtp_out = stdout;
memset(sender_host_cache, 0, sizeof(sender_host_cache));
if (verify_check_host(&hosts_connection_nolog) == OK)
+ {
BIT_CLEAR(log_selector, log_selector_size, Li_smtp_connection);
+ BIT_CLEAR(log_selector, log_selector_size, Li_smtp_no_mail);
+ }
log_write(L_smtp_connection, LOG_MAIN, "%s", smtp_get_connection_info());
if (!smtp_start_session())
{
mac_smtp_fflush();
- exim_exit(EXIT_SUCCESS, US"smtp_start toplevel");
+ exim_exit(EXIT_SUCCESS);
}
}
-/* Otherwise, set up the input size limit here. */
+/* Otherwise, set up the input size limit here and set no stdin stdio buffer
+(we handle buferring so as to have visibility of fill level). */
else
{
else
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "invalid value for "
"message_size_limit: %s", expand_string_message);
+
+ setvbuf(stdin, NULL, _IONBF, 0);
}
/* Loop for several messages when reading SMTP input. If we fork any child
As a consequence of this, the waitpid() below is now excluded if we are sure
that SIG_IGN works. */
-if (!synchronous_delivery)
+if (!f.synchronous_delivery)
{
- #ifdef SA_NOCLDWAIT
+#ifdef SA_NOCLDWAIT
struct sigaction act;
act.sa_handler = SIG_IGN;
sigemptyset(&(act.sa_mask));
act.sa_flags = SA_NOCLDWAIT;
sigaction(SIGCHLD, &act, NULL);
- #else
+#else
signal(SIGCHLD, SIG_IGN);
- #endif
+#endif
}
/* Save the current store pool point, for resetting at the start of
each message, and save the real sender address, if any. */
-reset_point = store_get(0);
real_sender_address = sender_address;
/* Loop to receive messages; receive_msg() returns TRUE if there are more
messages to be read (SMTP input), or FALSE otherwise (not SMTP, or SMTP channel
collapsed). */
-while (more)
+for (BOOL more = TRUE; more; )
{
+ rmark reset_point = store_mark();
message_id[0] = 0;
/* Handle the SMTP case; call smtp_setup_mst() to deal with the initial SMTP
if (smtp_batched_input && acl_not_smtp_start != NULL)
{
uschar *user_msg, *log_msg;
- enable_dollar_recipients = TRUE;
+ f.enable_dollar_recipients = TRUE;
(void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start,
&user_msg, &log_msg);
- enable_dollar_recipients = FALSE;
+ f.enable_dollar_recipients = FALSE;
}
/* Now get the data for the message */
more = receive_msg(extract_recipients);
- if (message_id[0] == 0)
+ if (!message_id[0])
{
cancel_cutthrough_connection(TRUE, US"receive dropped");
- if (more) goto moreloop;
+ if (more) goto MORELOOP;
smtp_log_no_mail(); /* Log no mail if configured */
- exim_exit(EXIT_FAILURE, US"receive toplevel");
+ exim_exit(EXIT_FAILURE);
}
}
else
{
cancel_cutthrough_connection(TRUE, US"message setup dropped");
smtp_log_no_mail(); /* Log no mail if configured */
- exim_exit(rc ? EXIT_FAILURE : EXIT_SUCCESS, US"msg setup toplevel");
+ exim_exit(rc ? EXIT_FAILURE : EXIT_SUCCESS);
}
}
else
{
- int i;
int rcount = 0;
int count = argc - recipients_arg;
uschar **list = argv + recipients_arg;
/* These options cannot be changed dynamically for non-SMTP messages */
- active_local_sender_retain = local_sender_retain;
- active_local_from_check = local_from_check;
+ f.active_local_sender_retain = local_sender_retain;
+ f.active_local_from_check = local_from_check;
/* Save before any rewriting */
raw_sender = string_copy(sender_address);
- /* Loop for each argument */
+ /* Loop for each argument (supplied by user hence tainted) */
- for (i = 0; i < count; i++)
+ for (int i = 0; i < count; i++)
{
int start, end, domain;
- uschar *errmess;
- uschar *s = list[i];
+ uschar * errmess;
+ /* There can be multiple addresses, so EXIM_DISPLAYMAIL_MAX (tuned for 1) is too short.
+ * We'll still want to cap it to something, just in case. */
+ uschar * s = string_copy_taint(
+ exim_str_fail_toolong(list[i], BIG_BUFFER_SIZE, "address argument"),
+ GET_TAINTED);
/* Loop for each comma-separated address */
- while (*s != 0)
+ while (*s)
{
BOOL finished = FALSE;
uschar *recipient;
if (error_handling == ERRORS_STDERR)
{
fprintf(stderr, "exim: too many recipients\n");
- exim_exit(EXIT_FAILURE, US"main");
+ exim_exit(EXIT_FAILURE);
}
else
return
parse_extract_address(s, &errmess, &start, &end, &domain, FALSE);
#ifdef SUPPORT_I18N
- if (string_is_utf8(recipient))
- message_smtputf8 = TRUE;
- else
- allow_utf8_domains = b;
+ if (recipient)
+ if (string_is_utf8(recipient)) message_smtputf8 = TRUE;
+ else allow_utf8_domains = b;
}
+#else
+ ;
#endif
- if (domain == 0 && !allow_unqualified_recipient)
+ if (domain == 0 && !f.allow_unqualified_recipient)
{
recipient = NULL;
errmess = US"unqualified recipient address not allowed";
}
- if (recipient == NULL)
- {
+ if (!recipient)
if (error_handling == ERRORS_STDERR)
{
fprintf(stderr, "exim: bad recipient address \"%s\": %s\n",
string_printing(list[i]), errmess);
- exim_exit(EXIT_FAILURE, US"main");
+ exim_exit(EXIT_FAILURE);
}
else
{
moan_to_sender(ERRMESS_BADARGADDRESS, &eblock, NULL, stdin, TRUE)?
errors_sender_rc : EXIT_FAILURE;
}
- }
- receive_add_recipient(recipient, -1);
+ receive_add_recipient(string_copy_taint(recipient, GET_TAINTED), -1);
s = ss;
if (!finished)
while (*(++s) != 0 && (*s == ',' || isspace(*s)));
DEBUG(D_receive)
{
- int i;
- if (sender_address != NULL) debug_printf("Sender: %s\n", sender_address);
- if (recipients_list != NULL)
+ if (sender_address) debug_printf("Sender: %s\n", sender_address);
+ if (recipients_list)
{
debug_printf("Recipients:\n");
- for (i = 0; i < recipients_count; i++)
+ for (int i = 0; i < recipients_count; i++)
debug_printf(" %s\n", recipients_list[i].address);
}
}
if (acl_not_smtp_start)
{
uschar *user_msg, *log_msg;
- enable_dollar_recipients = TRUE;
+ f.enable_dollar_recipients = TRUE;
(void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start,
&user_msg, &log_msg);
- enable_dollar_recipients = FALSE;
+ f.enable_dollar_recipients = FALSE;
}
/* Pause for a while waiting for input. If none received in that time,
the file copy. */
if (!receive_timeout)
- {
- struct timeval t = { .tv_sec = 30*60, .tv_usec = 0 }; /* 30 minutes */
- fd_set r;
-
- FD_ZERO(&r); FD_SET(0, &r);
- if (select(1, &r, NULL, NULL, &t) == 0) mainlog_close();
- }
+ if (poll_one_fd(0, POLLIN, 30*60*1000) == 0) /* 30 minutes */
+ mainlog_close();
/* Read the data for the message. If filter_test is not FTEST_NONE, this
will just read the headers for the message, and not write anything onto the
for real; when reading the headers of a message for filter testing,
it is TRUE if the headers were terminated by '.' and FALSE otherwise. */
- if (message_id[0] == 0) exim_exit(EXIT_FAILURE, US"main");
+ if (!message_id[0]) exim_exit(EXIT_FAILURE);
} /* Non-SMTP message reception */
/* If this is a filter testing run, there are headers in store, but
if (filter_test != FTEST_NONE)
{
- deliver_domain = (ftest_domain != NULL)?
- ftest_domain : qualify_domain_recipient;
+ deliver_domain = ftest_domain ? ftest_domain : qualify_domain_recipient;
deliver_domain_orig = deliver_domain;
- deliver_localpart = (ftest_localpart != NULL)?
- ftest_localpart : originator_login;
+ deliver_localpart = ftest_localpart ? US ftest_localpart : originator_login;
deliver_localpart_orig = deliver_localpart;
- deliver_localpart_prefix = ftest_prefix;
- deliver_localpart_suffix = ftest_suffix;
+ deliver_localpart_prefix = US ftest_prefix;
+ deliver_localpart_suffix = US ftest_suffix;
deliver_home = originator_home;
- if (return_path == NULL)
+ if (!return_path)
{
printf("Return-path copied from sender\n");
return_path = string_copy(sender_address);
receive_add_recipient(
string_sprintf("%s%s%s@%s",
- (ftest_prefix == NULL)? US"" : ftest_prefix,
+ ftest_prefix ? ftest_prefix : US"",
deliver_localpart,
- (ftest_suffix == NULL)? US"" : ftest_suffix,
+ ftest_suffix ? ftest_suffix : US"",
deliver_domain), -1);
printf("Recipient = %s\n", recipients_list[0].address);
- if (ftest_prefix != NULL) printf("Prefix = %s\n", ftest_prefix);
- if (ftest_suffix != NULL) printf("Suffix = %s\n", ftest_suffix);
+ if (ftest_prefix) printf("Prefix = %s\n", ftest_prefix);
+ if (ftest_suffix) printf("Suffix = %s\n", ftest_suffix);
if (chdir("/")) /* Get away from wherever the user is running this from */
{
DEBUG(D_receive) debug_printf("chdir(\"/\") failed\n");
- exim_exit(EXIT_FAILURE, US"main");
+ exim_exit(EXIT_FAILURE);
}
/* Now we run either a system filter test, or a user filter test, or both.
available to the user filter. We need to copy the filter variables
explicitly. */
- if ((filter_test & FTEST_SYSTEM) != 0)
+ if (filter_test & FTEST_SYSTEM)
if (!filter_runtest(filter_sfd, filter_test_sfile, TRUE, more))
- exim_exit(EXIT_FAILURE, US"main");
+ exim_exit(EXIT_FAILURE);
memcpy(filter_sn, filter_n, sizeof(filter_sn));
- if ((filter_test & FTEST_USER) != 0)
+ if (filter_test & FTEST_USER)
if (!filter_runtest(filter_ufd, filter_test_ufile, FALSE, more))
- exim_exit(EXIT_FAILURE, US"main");
+ exim_exit(EXIT_FAILURE);
- exim_exit(EXIT_SUCCESS, US"main");
+ exim_exit(EXIT_SUCCESS);
}
/* Else act on the result of message reception. We should not get here unless
will be TRUE. If it is not, check on the number of messages received in this
connection. */
- if (!session_local_queue_only &&
- smtp_accept_queue_per_connection > 0 &&
- receive_messagecount > smtp_accept_queue_per_connection)
+ if ( !session_local_queue_only
+ && smtp_accept_queue_per_connection > 0
+ && receive_messagecount > smtp_accept_queue_per_connection)
{
session_local_queue_only = TRUE;
queue_only_reason = 2;
ones. However, there are odd cases where this is not wanted, so this can be
changed by setting queue_only_load_latch false. */
- local_queue_only = session_local_queue_only;
- if (!local_queue_only && queue_only_load >= 0)
- {
- local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load;
- if (local_queue_only)
+ if (!(local_queue_only = session_local_queue_only) && queue_only_load >= 0)
+ if ((local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load))
{
queue_only_reason = 3;
if (queue_only_load_latch) session_local_queue_only = TRUE;
}
- }
/* If running as an MUA wrapper, all queueing options and freezing options
are ignored. */
if (mua_wrapper)
- local_queue_only = queue_only_policy = deliver_freeze = FALSE;
+ local_queue_only = f.queue_only_policy = f.deliver_freeze = FALSE;
/* Log the queueing here, when it will get a message id attached, but
not if queue_only is set (case 0). Case 1 doesn't happen here (too many
}
}
- else if (queue_only_policy || deliver_freeze)
+ else if (f.queue_only_policy || f.deliver_freeze)
cancel_cutthrough_connection(TRUE, US"no delivery; queueing");
/* Else do the delivery unless the ACL or local_scan() called for queue only
pid_t pid;
search_tidyup();
- if ((pid = fork()) == 0)
+ if ((pid = exim_fork(US"local-accept-delivery")) == 0)
{
int rc;
close_unwanted(); /* Close unwanted file descriptors and TLS */
rc = deliver_message(message_id, FALSE, FALSE);
search_tidyup();
- _exit((!mua_wrapper || rc == DELIVER_MUA_SUCCEEDED)?
- EXIT_SUCCESS : EXIT_FAILURE);
+ exim_underbar_exit(!mua_wrapper || rc == DELIVER_MUA_SUCCEEDED
+ ? EXIT_SUCCESS : EXIT_FAILURE);
}
if (pid < 0)
/* In the parent, wait if synchronous delivery is required. This will
always be the case in MUA wrapper mode. */
- if (synchronous_delivery)
+ if (f.synchronous_delivery)
{
int status;
while (wait(&status) != pid);
log_write(0, LOG_MAIN|LOG_PANIC,
"process %d crashed with signal %d while delivering %s",
(int)pid, status & 0x00ff, message_id);
- if (mua_wrapper && (status & 0xffff) != 0) exim_exit(EXIT_FAILURE, US"main");
+ if (mua_wrapper && (status & 0xffff) != 0) exim_exit(EXIT_FAILURE);
}
}
}
finished subprocesses here, in case there are lots of messages coming in
from the same source. */
- #ifndef SIG_IGN_WORKS
+#ifndef SIG_IGN_WORKS
while (waitpid(-1, NULL, WNOHANG) > 0);
- #endif
+#endif
-moreloop:
+MORELOOP:
return_path = sender_address = NULL;
authenticated_sender = NULL;
deliver_localpart_orig = NULL;
dnslist_domain = dnslist_matched = NULL;
#ifdef WITH_CONTENT_SCAN
malware_name = NULL;
+ regex_vars_clear();
#endif
callout_address = NULL;
sending_ip_address = NULL;
+ deliver_localpart_data = deliver_domain_data =
+ recipient_data = sender_data = NULL;
acl_var_m = NULL;
- { int i; for(i=0; i<REGEX_VARS; i++) regex_vars[i] = NULL; }
store_reset(reset_point);
}
-exim_exit(EXIT_SUCCESS, US"main"); /* Never returns */
+exim_exit(EXIT_SUCCESS); /* Never returns */
return 0; /* To stop compiler warning */
}
git://git.exim.org / exim.git / blobdiff