Testsuite: teach the fakedns zonefile generator about the ipv6 double-colon rule.

[exim.git] / test / runtest

diff --git a/test/runtest b/test/runtest
index f3053bdf77e90f3f140ecc7c8402eb187ae51df4..d42d400a961ad7bcba8ffdfcb354d328cfb2e8fc 100755 (executable)
--- a/test/runtest
+++ b/test/runtest
@@ -1,7 +1,5 @@
 #! /usr/bin/perl -w
 
 #! /usr/bin/perl -w
 

-# $Cambridge: exim/test/runtest,v 1.16 2006/10/31 16:13:48 ph10 Exp $
-

 ###############################################################################
 # This is the controlling script for the "new" test suite for Exim. It should #
 # be possible to export this suite for running on a wide variety of hosts, in #
 ###############################################################################
 # This is the controlling script for the "new" test suite for Exim. It should #
 # be possible to export this suite for running on a wide variety of hosts, in #


@@ -23,9 +21,9 @@ use Socket;
 
 # Start by initializing some global variables
 
 
 # Start by initializing some global variables
 

-$testversion = "4.64 (05-Sep-06)";
+$testversion = "4.72 (02-Jun-10)";

 
 

-$cf = "bin/cf";
+$cf = "bin/cf -exact";

 $cr = "\r";
 $debug = 0;
 $force_update = 0;
 $cr = "\r";
 $debug = 0;
 $force_update = 0;


@@ -299,6 +297,7 @@ $spid = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx";
 
 while(<IN>)
   {
 
 while(<IN>)
   {

+RESET_AFTER_EXTRA_LINE_READ:

   # Check for "*** truncated ***"
   $yield = 1 if /\*\*\* truncated \*\*\*/;
 
   # Check for "*** truncated ***"
   $yield = 1 if /\*\*\* truncated \*\*\*/;
 


@@ -312,7 +311,8 @@ while(<IN>)
   s?\Q$parm_cwd\E?TESTSUITE?g;
 
   # Replace the Exim version number (may appear in various places)
   s?\Q$parm_cwd\E?TESTSUITE?g;
 
   # Replace the Exim version number (may appear in various places)

-  s/Exim \d+\.\d+[\w-]*/Exim x.yz/i;
+  # patchexim should have fixed this for us
+  #s/(Exim) \d+\.\d+[\w_-]*/$1 x.yz/i;

 
   # Replace Exim message ids by a unique series
   s/((?:[^\W_]{6}-){2}[^\W_]{2})
 
   # Replace Exim message ids by a unique series
   s/((?:[^\W_]{6}-){2}[^\W_]{2})


@@ -330,7 +330,8 @@ while(<IN>)
   s/TlRMTVNTUAACAAAAAAAAAAAoAAABgg[\w+\/]+/TlRMTVNTUAACAAAAAAAAAAAoAAABggAAAEbBRwqFwwIAAAAAAAAAAAAt1sgAAAAA/;
 
   # PRVS values
   s/TlRMTVNTUAACAAAAAAAAAAAoAAABgg[\w+\/]+/TlRMTVNTUAACAAAAAAAAAAAoAAABggAAAEbBRwqFwwIAAAAAAAAAAAAt1sgAAAAA/;
 
   # PRVS values

-  s?prvs=([^/]+)/[\da-f]{10}@?prvs=$1/xxxxxxxxxx@?g;
+  s?prvs=([^/]+)/[\da-f]{10}@?prvs=$1/xxxxxxxxxx@?g;    # Old form
+  s?prvs=[\da-f]{10}=([^@]+)@?prvs=xxxxxxxxxx=$1@?g;    # New form

 
   # Error lines on stdout from SSL contain process id values and file names.
   # They also contain a source file name and line number, which may vary from
 
   # Error lines on stdout from SSL contain process id values and file names.
   # They also contain a source file name and line number, which may vary from


@@ -338,6 +339,9 @@ while(<IN>)
   s/^\d+:error:/pppp:error:/;
   s/:(?:\/[^\s:]+\/)?([^\/\s]+\.c):\d+:/:$1:dddd:/;
 
   s/^\d+:error:/pppp:error:/;
   s/:(?:\/[^\s:]+\/)?([^\/\s]+\.c):\d+:/:$1:dddd:/;
 

+  # There are differences in error messages between OpenSSL versions
+  s/SSL_CTX_set_cipher_list/SSL_connect/;
+

   # One error test in expansions mentions base 62 or 36
   s/is not a base (36|62) number/is not a base 36\/62 number/;
 
   # One error test in expansions mentions base 62 or 36
   s/is not a base (36|62) number/is not a base 36\/62 number/;
 


@@ -429,8 +433,15 @@ while(<IN>)
   # Date/time in exim -bV output
   s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
 
   # Date/time in exim -bV output
   s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
 

+  # Time on queue tolerance
+  s/QT=1s/QT=0s/;
+
+  # Eximstats heading
+  s/Exim\sstatistics\sfrom\s\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\sto\s
+    \d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Exim statistics from <time> to <time>/x;
+

 
 

-  # ======== Caller's login, uid, gid, home ========
+  # ======== Caller's login, uid, gid, home, gecos ========

 
   s/\Q$parm_caller_home\E/CALLER_HOME/g;   # NOTE: these must be done
   s/\b\Q$parm_caller\E\b/CALLER/g;         #       in this order!
 
   s/\Q$parm_caller_home\E/CALLER_HOME/g;   # NOTE: these must be done
   s/\b\Q$parm_caller\E\b/CALLER/g;         #       in this order!


@@ -442,6 +453,8 @@ while(<IN>)
   s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
   s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
 
   s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
   s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
 

+  s/\bname=$parm_caller_gecos\b/name=CALLER_GECOS/g;
+

   # When looking at spool files with -Mvh, we will find not only the caller
   # login, but also the uid and gid. It seems that $) in some Perls gives all
   # the auxiliary gids as well, so don't bother checking for that.
   # When looking at spool files with -Mvh, we will find not only the caller
   # login, but also the uid and gid. It seems that $) in some Perls gives all
   # the auxiliary gids as well, so don't bother checking for that.


@@ -456,9 +469,10 @@ while(<IN>)
 
 
   # ======== Exim's login ========
 
 
   # ======== Exim's login ========

-  # For bounce messages, this will appear on the U= lines in logs and also
-  # after Received: and in addresses. In one pipe test it appears after
-  # "Running as:". It also appears in addresses, and in the names of lock
+  # For messages received by the daemon, this is in the -H file, which some
+  # tests inspect. For bounce messages, this will appear on the U= lines in
+  # logs and also after Received: and in addresses. In one pipe test it appears
+  # after "Running as:". It also appears in addresses, and in the names of lock

   # files.
 
   s/U=$parm_eximuser/U=EXIMUSER/;
   # files.
 
   s/U=$parm_eximuser/U=EXIMUSER/;


@@ -475,10 +489,18 @@ while(<IN>)
   s/\buid=$parm_exim_uid\b/uid=EXIM_UID/g;
   s/\bgid=$parm_exim_gid\b/gid=EXIM_GID/g;
 
   s/\buid=$parm_exim_uid\b/uid=EXIM_UID/g;
   s/\bgid=$parm_exim_gid\b/gid=EXIM_GID/g;
 

+  s/^$parm_eximuser $parm_exim_uid $parm_exim_gid/EXIMUSER EXIM_UID EXIM_GID/;
+

 
   # ======== General uids, gids, and pids ========
   # Note: this must come after munges for caller's and exim's uid/gid
 
 
   # ======== General uids, gids, and pids ========
   # Note: this must come after munges for caller's and exim's uid/gid
 

+  # These are for systems where long int is 64
+  s/\buid=4294967295/uid=-1/;
+  s/\beuid=4294967295/euid=-1/;
+  s/\bgid=4294967295/gid=-1/;
+  s/\begid=4294967295/egid=-1/;
+

   s/\bgid=\d+/gid=gggg/;
   s/\begid=\d+/egid=gggg/;
   s/\bpid=\d+/pid=pppp/;
   s/\bgid=\d+/gid=gggg/;
   s/\begid=\d+/egid=gggg/;
   s/\bpid=\d+/pid=pppp/;


@@ -494,6 +516,10 @@ while(<IN>)
   # Pid in temp file in appendfile transport
   s"test-mail/temp\.\d+\."test-mail/temp.pppp.";
 
   # Pid in temp file in appendfile transport
   s"test-mail/temp\.\d+\."test-mail/temp.pppp.";
 

+  # Optional pid in log lines
+  s/^(\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d)(\s[+-]\d\d\d\d|)(\s\[\d+\])/
+    "$1$2 [" . new_value($3, "%s", \$next_pid) . "]"/gxe;
+

   # Detect a daemon stderr line with a pid and save the pid for subsequent
   # removal from following lines.
   $spid = $1 if /^(\s*\d+) (?:listening|LOG: MAIN|(?:daemon_smtp_port|local_interfaces) overridden by)/;
   # Detect a daemon stderr line with a pid and save the pid for subsequent
   # removal from following lines.
   $spid = $1 if /^(\s*\d+) (?:listening|LOG: MAIN|(?:daemon_smtp_port|local_interfaces) overridden by)/;


@@ -510,8 +536,8 @@ while(<IN>)
   s/\(port=(\d+)/"(port=" . new_value($1, "%s", \$next_port)/e;
 
   # This handles "connection from" and the like, when the port is given
   s/\(port=(\d+)/"(port=" . new_value($1, "%s", \$next_port)/e;
 
   # This handles "connection from" and the like, when the port is given

-  if (!/listening for SMTP on/ && !/Connecting to/ && !/=>/ && !/\*>/ &&
-      !/Connection refused/)
+  if (!/listening for SMTP on/ && !/Connecting to/ && !/=>/ && !/->/
+      && !/\*>/ && !/Connection refused/)

     {
     s/\[([a-z\d:]+|\d+(?:\.\d+){3})\]:(\d+)/"[".$1."]:".new_value($2,"%s",\$next_port)/ie;
     }
     {
     s/\[([a-z\d:]+|\d+(?:\.\d+){3})\]:(\d+)/"[".$1."]:".new_value($2,"%s",\$next_port)/ie;
     }


@@ -524,6 +550,9 @@ while(<IN>)
   # The amount of space between "host" and the address in verification output
   # depends on the length of the host name. We therefore reduce it to one space
   # for all of them.
   # The amount of space between "host" and the address in verification output
   # depends on the length of the host name. We therefore reduce it to one space
   # for all of them.

+  # Also, the length of space at the end of the host line is dependent
+  # on the length of the longest line, so strip it also on otherwise
+  # un-rewritten lines like localhost

 
   s/^\s+host\s(\S+)\s+(\S+)/  host $1 $2/;
   s/^\s+(host\s\S+\s\S+)\s+(port=.*)/  host $1 $2/;
 
   s/^\s+host\s(\S+)\s+(\S+)/  host $1 $2/;
   s/^\s+(host\s\S+\s\S+)\s+(port=.*)/  host $1 $2/;


@@ -531,9 +560,10 @@ while(<IN>)
   s/host\s\Q$parm_ipv4\E\s\[\Q$parm_ipv4\E\]/host ipv4.ipv4.ipv4.ipv4 [ipv4.ipv4.ipv4.ipv4]/;
   s/host\s\Q$parm_ipv6\E\s\[\Q$parm_ipv6\E\]/host ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6 [ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6]/;
   s/\b\Q$parm_ipv4\E\b/ip4.ip4.ip4.ip4/g;
   s/host\s\Q$parm_ipv4\E\s\[\Q$parm_ipv4\E\]/host ipv4.ipv4.ipv4.ipv4 [ipv4.ipv4.ipv4.ipv4]/;
   s/host\s\Q$parm_ipv6\E\s\[\Q$parm_ipv6\E\]/host ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6 [ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6]/;
   s/\b\Q$parm_ipv4\E\b/ip4.ip4.ip4.ip4/g;

-  s/\b\Q$parm_ipv6\E\b/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
+  s/(^|\W)\K\Q$parm_ipv6\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;

   s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;
   s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;

-  s/\b\Q$parm_ipv6r\E\b/ip6-reverse/g;
+  s/(^|\W)\K\Q$parm_ipv6r\E/ip6-reverse/g;
+  s/^(\s+host\s\S+\s+\[\S+\]) +$/$1 /;

 
 
   # ======== Test network IP addresses ========
 
 
   # ======== Test network IP addresses ========


@@ -563,7 +593,14 @@ while(<IN>)
 
   # ======== Output from ls ========
   # Different operating systems use different spacing on long output
 
   # ======== Output from ls ========
   # Different operating systems use different spacing on long output

-  s/ +/ /g if /^[-rwd]{10} /;
+  #s/ +/ /g if /^[-rwd]{10} /;
+  # (Bug 1226) SUSv3 allows a trailing printable char for modified access method control.
+  # Handle only the Gnu and MacOS space, dot, plus and at-sign.  A full [[:graph:]]
+  # unfortunately matches a non-ls linefull of dashes.
+  # Allow the case where we've already picked out the file protection bits.
+  if (s/^([-d](?:[-r][-w][-SsTtx]){3})[.+@]?( +|$)/$1$2/) {
+    s/ +/ /g;
+  }

 
 
   # ======== Message sizes =========
 
 
   # ======== Message sizes =========


@@ -574,7 +611,7 @@ while(<IN>)
   s/([\s,])S=\d+\b/$1S=sss/;
   s/:S\d+\b/:Ssss/;
   s/^(\s*\d+m\s+)\d+(\s+[a-z0-9-]{16} <)/$1sss$2/i if $is_stdout;
   s/([\s,])S=\d+\b/$1S=sss/;
   s/:S\d+\b/:Ssss/;
   s/^(\s*\d+m\s+)\d+(\s+[a-z0-9-]{16} <)/$1sss$2/i if $is_stdout;

-  s/\sSIZE=\d+\b/ SIZE=ssss/ if $is_stderr || $is_stdout;
+  s/\sSIZE=\d+\b/ SIZE=ssss/;

   s/\ssize=\d+\b/ size=sss/ if $is_stderr;
   s/old size = \d+\b/old size = sssss/;
   s/message size = \d+\b/message size = sss/;
   s/\ssize=\d+\b/ size=sss/ if $is_stderr;
   s/old size = \d+\b/old size = sssss/;
   s/message size = \d+\b/message size = sss/;


@@ -587,6 +624,8 @@ while(<IN>)
   s/\+0100,\d+;/+0100,ddd;/;
   s/\(\d+ bytes written\)/(ddd bytes written)/;
   s/added '\d+ 1'/added 'ddd 1'/;
   s/\+0100,\d+;/+0100,ddd;/;
   s/\(\d+ bytes written\)/(ddd bytes written)/;
   s/added '\d+ 1'/added 'ddd 1'/;

+  s/Received\s+\d+/Received               nnn/;
+  s/Delivered\s+\d+/Delivered              nnn/;

 
 
   # ======== Values in spool space failure message ========
 
 
   # ======== Values in spool space failure message ========


@@ -650,6 +689,12 @@ while(<IN>)
   s/^\d\d\d(?=[PFS*])/ddd/;
 
 
   s/^\d\d\d(?=[PFS*])/ddd/;
 
 

+  # ========= Exim lookups ==================
+  # Lookups have a char which depends on the number of lookup types compiled in,
+  # in stderr output.  Replace with a "0".  Recognising this while avoiding
+  # other output is fragile; perhaps the debug output should be revised instead.
+  s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
+

   # ==========================================================
   # Some munging is specific to the specific file types
 
   # ==========================================================
   # Some munging is specific to the specific file types
 


@@ -697,6 +742,46 @@ while(<IN>)
 
     s/\bgethostbyname2?|\bgetipnodebyname/get[host|ipnode]byname[2]/;
 
 
     s/\bgethostbyname2?|\bgetipnodebyname/get[host|ipnode]byname[2]/;
 

+    # drop gnutls version strings
+    next if /GnuTLS compile-time version: \d+[\.\d]+$/;
+    next if /GnuTLS runtime version: \d+[\.\d]+$/;
+
+    # drop openssl version strings
+    next if /OpenSSL compile-time version: OpenSSL \d+[\.\da-z]+/;
+    next if /OpenSSL runtime version: OpenSSL \d+[\.\da-z]+/;
+
+    # drop lookups
+    next if /^Lookups \(built-in\):/;
+    next if /^Loading lookup modules from/;
+    next if /^Loaded \d+ lookup modules/;
+    next if /^Total \d+ lookups/;
+
+    # drop compiler information
+    next if /^Compiler:/;
+
+    # and the ugly bit
+    # different libraries will have different numbers (possibly 0) of follow-up
+    # lines, indenting with more data
+    if (/^Library version:/) {
+      while (1) {
+       $_ = <IN>;
+       next if /^\s/;
+       goto RESET_AFTER_EXTRA_LINE_READ;
+      }
+    }
+
+    # drop other build-time controls emitted for debugging
+    next if /^WHITELIST_D_MACROS:/;
+    next if /^TRUSTED_CONFIG_LIST:/;
+
+    # As of Exim 4.74, we log when a setgid fails; because we invoke Exim
+    # with -be, privileges will have been dropped, so this will always
+    # be the case
+    next if /^changing group to \d+ failed: Operation not permitted/;
+
+    # We invoke Exim with -D, so we hit this new messag as of Exim 4.73:
+    next if /^macros_trusted overridden to true by whitelisting/;
+

     # We have to omit the localhost ::1 address so that all is well in
     # the IPv4-only case.
 
     # We have to omit the localhost ::1 address so that all is well in
     # the IPv4-only case.
 


@@ -704,6 +789,9 @@ while(<IN>)
       if (/looked up these IP addresses/);
     next if /name=localhost address=::1/;
 
       if (/looked up these IP addresses/);
     next if /name=localhost address=::1/;
 

+    # drop pdkim debugging header
+    next if /^PDKIM <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+$/;
+

     # Various other IPv6 lines must be omitted too
 
     next if /using host_fake_gethostbyname for \S+ \(IPv6\)/;
     # Various other IPv6 lines must be omitted too
 
     next if /using host_fake_gethostbyname for \S+ \(IPv6\)/;


@@ -852,7 +940,7 @@ if ($_[1]) { $_ = "u"; print "... update forced\n"; }
 #             [4] TRUE if this is a log file whose deliveries must be sorted
 #
 # Returns:    0 comparison succeeded or differences to be ignored
 #             [4] TRUE if this is a log file whose deliveries must be sorted
 #
 # Returns:    0 comparison succeeded or differences to be ignored

-#             1 comparison failed; files were updated (=> re-compare)
+#             1 comparison failed; files may have been updated (=> re-compare)

 #
 # Does not return if the user replies "Q" to a prompt.
 
 #
 # Does not return if the user replies "Q" to a prompt.
 


@@ -886,7 +974,7 @@ if (! -e $sf)
       print "\n";
       print "------------ $f -----------\n"
         if (defined $rf && -s $rf && defined $rsf && -s $rsf);
       print "\n";
       print "------------ $f -----------\n"
         if (defined $rf && -s $rf && defined $rsf && -s $rsf);

-      system("$more $f");
+      system("$more '$f'");

       }
     }
 
       }
     }
 


@@ -1000,7 +1088,7 @@ if (-e $sf)
 
   # Do the comparison
 
 
   # Do the comparison
 

-  return 0 if (system("$cf $mf $sf >test-cf") == 0);
+  return 0 if (system("$cf '$mf' '$sf' >test-cf") == 0);

 
   # Handle comparison failure
 
 
   # Handle comparison failure
 


@@ -1010,9 +1098,10 @@ if (-e $sf)
   print "\n";
   for (;;)
     {
   print "\n";
   for (;;)
     {

-    interact("Continue, Update & retry, Quit? [Q] ", $force_update);
+    interact("Continue, Retry, Update & retry, Quit? [Q] ", $force_update);

     tests_exit(1) if /^q?$/i;
     return 0 if /^c$/i;
     tests_exit(1) if /^q?$/i;
     return 0 if /^c$/i;

+    return 1 if /^r$/i;

     last if (/^u$/i);
     }
   }
     last if (/^u$/i);
     }
   }


@@ -1020,7 +1109,7 @@ if (-e $sf)
 # Update or delete the saved file, and give the appropriate return code.
 
 if (-s $mf)
 # Update or delete the saved file, and give the appropriate return code.
 
 if (-s $mf)

-  { tests_exit(-1, "Failed to cp $mf $sf") if system("cp $mf $sf") != 0; }
+  { tests_exit(-1, "Failed to cp $mf $sf") if system("cp '$mf' '$sf'") != 0; }

 else
   { tests_exit(-1, "Failed to unlink $sf") if !unlink($sf); }
 
 else
   { tests_exit(-1, "Failed to unlink $sf") if !unlink($sf); }
 


@@ -1044,7 +1133,7 @@ return 1;
 #
 # Arguments: none
 # Returns:   0 if the output compared equal
 #
 # Arguments: none
 # Returns:   0 if the output compared equal

-#            1 if files were updated and the test must be re-run
+#            1 if re-run needed (files may have been updated)

 
 sub check_output{
 my($yield) = 0;
 
 sub check_output{
 my($yield) = 0;


@@ -1392,7 +1481,7 @@ if (/^exim_lock\s+(.*)$/)
   # This gives the process time to get started; otherwise the next
   # process may not find it there when it expects it.
 
   # This gives the process time to get started; otherwise the next
   # process may not find it there when it expects it.
 

-  select(undef, undef, undef, 0.01);
+  select(undef, undef, undef, 0.1);

   return 3;
   }
 
   return 3;
   }
 


@@ -1410,6 +1499,30 @@ if (/^exinext\s+(.*)/)
   }
 
 
   }
 
 

+# The "exigrep" command runs exigrep on the current mainlog
+
+if (/^exigrep\s+(.*)/)
+  {
+  run_system("(./eximdir/exigrep " .
+    "$1 $parm_cwd/spool/log/mainlog;" .
+    "echo exigrep exit code = \$?)" .
+    ">>test-stdout");
+  return 1;
+  }
+
+
+# The "eximstats" command runs eximstats on the current mainlog
+
+if (/^eximstats\s+(.*)/)
+  {
+  run_system("(./eximdir/eximstats " .
+    "$1 $parm_cwd/spool/log/mainlog;" .
+    "echo eximstats exit code = \$?)" .
+    ">>test-stdout");
+  return 1;
+  }
+
+

 # The "gnutls" command makes a copy of saved GnuTLS parameter data in the
 # spool directory, to save Exim from re-creating it each time.
 
 # The "gnutls" command makes a copy of saved GnuTLS parameter data in the
 # spool directory, to save Exim from re-creating it each time.
 


@@ -1514,7 +1627,7 @@ if (/^server\s+(.*)$/)
   # This gives the server time to get started; otherwise the next
   # process may not find it there when it expects it.
 
   # This gives the server time to get started; otherwise the next
   # process may not find it there when it expects it.
 

-  select(undef, undef, undef, 0.01);
+  select(undef, undef, undef, 0.5);

   return 3;
   }
 
   return 3;
   }
 


@@ -1765,6 +1878,13 @@ autoflush STDOUT 1;
 print "Exim tester $testversion\n";
 
 
 print "Exim tester $testversion\n";
 
 

+##################################################
+#      Some tests check created file modes       #
+##################################################
+
+umask 022;
+
+

 ##################################################
 #       Check for the "less" command             #
 ##################################################
 ##################################################
 #       Check for the "less" command             #
 ##################################################


@@ -1936,7 +2056,13 @@ if ($parm_exim eq "")
 #          Find what is in the binary            #
 ##################################################
 
 #          Find what is in the binary            #
 ##################################################
 

-open(EXIMINFO, "$parm_exim -C confs/0000 -DDIR=$parm_cwd " .
+# deal with TRUSTED_CONFIG_LIST restrictions
+unlink("$parm_cwd/test-config") if -e "$parm_cwd/test-config";
+symlink("$parm_cwd/confs/0000", "$parm_cwd/test-config")
+  or die "Unable to link initial config into place: $!\n";
+
+print("Probing with config file: $parm_cwd/test-config\n");
+open(EXIMINFO, "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd " .

                "-bP exim_user exim_group|") ||
   die "** Cannot run $parm_exim: $!\n";
 while(<EXIMINFO>)
                "-bP exim_user exim_group|") ||
   die "** Cannot run $parm_exim: $!\n";
 while(<EXIMINFO>)


@@ -1951,6 +2077,13 @@ if (defined $parm_eximuser)
   if ($parm_eximuser =~ /^\d+$/) { $parm_exim_uid = $parm_eximuser; }
     else { $parm_exim_uid = getpwnam($parm_eximuser); }
   }
   if ($parm_eximuser =~ /^\d+$/) { $parm_exim_uid = $parm_eximuser; }
     else { $parm_exim_uid = getpwnam($parm_eximuser); }
   }

+else
+  {
+  print "Unable to extract exim_user from binary.\n";
+  print "Check if Exim refused to run; if so, consider:\n";
+  print "  TRUSTED_CONFIG_LIST ALT_CONFIG_PREFIX WHITELIST_D_MACROS\n";
+  die "Failing to get information from binary.\n";
+  }

 
 if (defined $parm_eximgroup)
   {
 
 if (defined $parm_eximgroup)
   {


@@ -1958,7 +2091,7 @@ if (defined $parm_eximgroup)
     else { $parm_exim_gid = getgrnam($parm_eximgroup); }
   }
 
     else { $parm_exim_gid = getgrnam($parm_eximgroup); }
   }
 

-open(EXIMINFO, "$parm_exim -bV -C confs/0000 -DDIR=$parm_cwd |") ||
+open(EXIMINFO, "$parm_exim -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||

   die "** Cannot run $parm_exim: $!\n";
 
 print "-" x 78, "\n";
   die "** Cannot run $parm_exim: $!\n";
 
 print "-" x 78, "\n";


@@ -1971,7 +2104,10 @@ while (<EXIMINFO>)
 
   elsif (/^Size of off_t: (\d+)/)
     {
 
   elsif (/^Size of off_t: (\d+)/)
     {

+    print;

     $have_largefiles = 1 if $1 > 4;
     $have_largefiles = 1 if $1 > 4;

+    die "** Size of off_t > 32 which seems improbable, not running tests\n"
+        if ($1 > 32);

     }
 
   elsif (/^Support for: (.*)/)
     }
 
   elsif (/^Support for: (.*)/)


@@ -1982,7 +2118,7 @@ while (<EXIMINFO>)
     %parm_support = @temp;
     }
 
     %parm_support = @temp;
     }
 

-  elsif (/^Lookups: (.*)/)
+  elsif (/^Lookups \(built-in\): (.*)/)

     {
     print;
     @temp = split /(\s+)/, $1;
     {
     print;
     @temp = split /(\s+)/, $1;


@@ -2032,6 +2168,7 @@ while (<EXIMINFO>)
 close(EXIMINFO);
 print "-" x 78, "\n";
 
 close(EXIMINFO);
 print "-" x 78, "\n";
 

+unlink("$parm_cwd/test-config");

 
 ##################################################
 #    Check for SpamAssassin and ClamAV           #
 
 ##################################################
 #    Check for SpamAssassin and ClamAV           #


@@ -2205,7 +2342,7 @@ if (defined $parm_support{'Content_Scanning'})
 
         if($@)
           {
 
         if($@)
           {

-          warn $@;
+          print "  $@";

           print "  Assume ClamAV is not running\n";
           }
         else
           print "  Assume ClamAV is not running\n";
           }
         else


@@ -2302,18 +2439,23 @@ if (defined $parm_support{'Expand_dlfunc'} && !-e "bin/loaded")
 # Find the caller of this program.
 
 ($parm_caller,$pwpw,$parm_caller_uid,$parm_caller_gid,$pwquota,$pwcomm,
 # Find the caller of this program.
 
 ($parm_caller,$pwpw,$parm_caller_uid,$parm_caller_gid,$pwquota,$pwcomm,

- $pwgecos, $parm_caller_home) = getpwuid($>);
+ $parm_caller_gecos, $parm_caller_home) = getpwuid($>);

 
 $pwpw = $pwpw;       # Kill Perl warnings
 $pwquota = $pwquota;
 $pwcomm = $pwcomm;
 
 $pwpw = $pwpw;       # Kill Perl warnings
 $pwquota = $pwquota;
 $pwcomm = $pwcomm;

-$pwgecos = $pwgecos;

 
 $parm_caller_group = getgrgid($parm_caller_gid);
 
 print "Program caller is $parm_caller, whose group is $parm_caller_group\n";
 print "Home directory is $parm_caller_home\n";
 
 
 $parm_caller_group = getgrgid($parm_caller_gid);
 
 print "Program caller is $parm_caller, whose group is $parm_caller_group\n";
 print "Home directory is $parm_caller_home\n";
 

+unless (defined $parm_eximgroup)
+  {
+  print "Unable to derive \$parm_eximgroup.\n";
+  die "** ABANDONING.\n";
+  }
+

 print "You need to be in the Exim group to run these tests. Checking ...";
 
 if (`groups` =~ /\b\Q$parm_eximgroup\E\b/)
 print "You need to be in the Exim group to run these tests. Checking ...";
 
 if (`groups` =~ /\b\Q$parm_eximgroup\E\b/)


@@ -2532,6 +2674,16 @@ if (system("cp $parm_exim_dir/exinext eximdir") != 0)
   tests_exit(-1, "Failed to make a copy of exinext: $!");
   }
 
   tests_exit(-1, "Failed to make a copy of exinext: $!");
   }
 

+if (system("cp $parm_exim_dir/exigrep eximdir") != 0)
+  {
+  tests_exit(-1, "Failed to make a copy of exigrep: $!");
+  }
+
+if (system("cp $parm_exim_dir/eximstats eximdir") != 0)
+  {
+  tests_exit(-1, "Failed to make a copy of eximstats: $!");
+  }
+

 
 ##################################################
 #    Check that the Exim user can access stuff   #
 
 ##################################################
 #    Check that the Exim user can access stuff   #


@@ -2542,6 +2694,12 @@ if (system("cp $parm_exim_dir/exinext eximdir") != 0)
 
 print "Exim user is $parm_eximuser ($parm_exim_uid)\n";
 print "Exim group is $parm_eximgroup ($parm_exim_gid)\n";
 
 print "Exim user is $parm_eximuser ($parm_exim_uid)\n";
 print "Exim group is $parm_eximgroup ($parm_exim_gid)\n";

+
+if ($parm_caller_uid eq $parm_exim_uid) {
+  tests_exit(-1, "Exim user ($parm_eximuser,$parm_exim_uid) cannot be "
+                ."the same as caller ($parm_caller,$parm_caller_uid)");
+}
+

 print "The Exim user needs access to the test suite directory. Checking ...";
 
 if (($rc = system("sudo bin/checkaccess $parm_cwd/eximdir/exim $parm_eximuser $parm_eximgroup")) != 0)
 print "The Exim user needs access to the test suite directory. Checking ...";
 
 if (($rc = system("sudo bin/checkaccess $parm_cwd/eximdir/exim $parm_eximuser $parm_eximgroup")) != 0)


@@ -2789,7 +2947,16 @@ if ($have_ipv4 && $parm_ipv4 ne "127.0.0.1")
 
 if ($have_ipv6 && $parm_ipv6 ne "::1")
   {
 
 if ($have_ipv6 && $parm_ipv6 ne "::1")
   {

-  my(@components) = split /:/, $parm_ipv6;
+  my($exp_v6) = $parm_ipv6;
+  $exp_v6 =~ s/[^:]//g;
+  if ( $parm_ipv6 =~ /^([^:].+)::$/ ) {
+    $exp_v6 = $1 . ':0' x (9-length($exp_v6));
+  } elsif ( $parm_ipv6 =~ /^(.+)::(.+)$/ ) {
+    $exp_v6 = $1 . ':0' x (8-length($exp_v6)) . ':' . $2;
+  } elsif ( $parm_ipv6 =~ /^::(.+[^:])$/ ) {
+    $exp_v6 = '0:' x (9-length($exp_v6)) . $1;
+  }
+  my(@components) = split /:/, $exp_v6;

   my(@nibbles) = reverse (split /\s*/, shift @components);
   my($sep) =  "";
 
   my(@nibbles) = reverse (split /\s*/, shift @components);
   my($sep) =  "";
 


@@ -2901,6 +3068,7 @@ foreach $test (@test_list)
 
   undef %cache;
   $next_msgid = "aX";
 
   undef %cache;
   $next_msgid = "aX";

+  $next_pid = 1234;

   $next_port = 1111;
   $message_skip = 0;
   $msglog_skip = 0;
   $next_port = 1111;
   $message_skip = 0;
   $msglog_skip = 0;


@@ -3114,4 +3282,4 @@ tests_exit(-1, "No runnable tests selected") if @test_list == 0;
 tests_exit(0);
 
 # End of runtest script
 tests_exit(0);
 
 # End of runtest script

-
+# vim: set sw=2 :