Fix LibreSSL build

[exim.git] / src / src / EDITME

diff --git a/src/src/EDITME b/src/src/EDITME
index 906d50ae8608e9183c172bc674e312956c62a327..28d3d538ed80a80160dc5b9efbb3f3bce857157b 100644 (file)
--- a/src/src/EDITME
+++ b/src/src/EDITME
@@ -13,12 +13,11 @@
 
 # Things that depend on the operating system have default settings in
 # OS/Makefile-Default, but these are overridden for some OS by files
 
 # Things that depend on the operating system have default settings in
 # OS/Makefile-Default, but these are overridden for some OS by files

-# called called OS/Makefile-<osname>. You can further override these by
-# creating files called Local/Makefile-<osname>, and
-# Local/Makefile-<buildname> (where "<osname>" stands for the name of
-# your operating system - look at the names in the OS directory to see
-# which names are recognized, and "<buildname>" is derived from the
-# environment variable "build")
+# called OS/Makefile-<osname>. You can further override these settings by
+# creating files Local/Makefile-<osname>, and Local/Makefile-<build>.
+# The suffix "<osname>" stands for the name of your operating system - look
+# at the names in the OS directory to see which names are recognized,
+# and "<build>" is the content of the environment variable "build".

 
 # However, if you are building Exim for a single OS only, you don't need to
 # worry about setting up Local/Makefile-<osname>. Any build-time configuration
 
 # However, if you are building Exim for a single OS only, you don't need to
 # worry about setting up Local/Makefile-<osname>. Any build-time configuration


@@ -199,7 +198,7 @@ SPOOL_DIRECTORY=/var/spool/exim
 # the libraries and headers are installed, as the pkg-config .pc
 # specification should include all -L/-I information necessary.
 # Enabling the USE_*_PC options should be sufficient. If not using
 # the libraries and headers are installed, as the pkg-config .pc
 # specification should include all -L/-I information necessary.
 # Enabling the USE_*_PC options should be sufficient. If not using

-# pkg-config, then you have to specify the libraries, and you mmight
+# pkg-config, then you have to specify the libraries, and you might

 # need to specify the locations too.
 
 # Uncomment the following lines if you want
 # need to specify the locations too.
 
 # Uncomment the following lines if you want


@@ -208,7 +207,7 @@ SPOOL_DIRECTORY=/var/spool/exim
 # Unless you do this, you must define one of USE_OPENSSL or USE_GNUTLS
 # below.
 
 # Unless you do this, you must define one of USE_OPENSSL or USE_GNUTLS
 # below.
 

-# If you are buliding with TLS, the library configuration must be done:
+# If you are building with TLS, the library configuration must be done:

 
 # Uncomment this if you are using OpenSSL
 # USE_OPENSSL=yes
 
 # Uncomment this if you are using OpenSSL
 # USE_OPENSSL=yes


@@ -277,6 +276,9 @@ SPOOL_DIRECTORY=/var/spool/exim
 # specified in INCLUDE.
 
 
 # specified in INCLUDE.
 
 

+# Uncomment the following line to remove support for TLS Resumption
+# DISABLE_TLS_RESUME=yes
+

 
 ###############################################################################
 #           THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY                     #
 
 ###############################################################################
 #           THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY                     #


@@ -412,6 +414,8 @@ LOOKUP_DNSDB=yes
 # LOOKUP_IBASE=yes
 # LOOKUP_JSON=yes
 # LOOKUP_LDAP=yes
 # LOOKUP_IBASE=yes
 # LOOKUP_JSON=yes
 # LOOKUP_LDAP=yes

+# LOOKUP_LMDB=yes
+

 # LOOKUP_MYSQL=yes
 # LOOKUP_MYSQL_PC=mariadb
 # LOOKUP_NIS=yes
 # LOOKUP_MYSQL=yes
 # LOOKUP_MYSQL_PC=mariadb
 # LOOKUP_NIS=yes


@@ -453,27 +457,27 @@ LOOKUP_DNSDB=yes
 
 
 #------------------------------------------------------------------------------
 
 
 #------------------------------------------------------------------------------

-# The PCRE library is required for Exim.  There is no longer an embedded
+# The PCRE2 library is required for Exim.  There is no longer an embedded

 # version of the PCRE library included with the source code, instead you
 # version of the PCRE library included with the source code, instead you

-# must use a system library or build your own copy of PCRE.
+# must use a system library or build your own copy of PCRE2.

 # In either case you must specify the library link info here.  If the
 # In either case you must specify the library link info here.  If the

-# PCRE header files are not in the standard search path you must also
+# PCRE2 header files are not in the standard search path you must also

 # modify the INCLUDE path (above)
 #
 # Use PCRE_CONFIG to query the pcre-config command (first found in $PATH)
 # to find the include files and libraries, else use PCRE_LIBS and set INCLUDE
 # too if needed.
 
 # modify the INCLUDE path (above)
 #
 # Use PCRE_CONFIG to query the pcre-config command (first found in $PATH)
 # to find the include files and libraries, else use PCRE_LIBS and set INCLUDE
 # too if needed.
 

-PCRE_CONFIG=yes
-# PCRE_LIBS=-lpcre
+PCRE2_CONFIG=yes
+# PCRE_LIBS=-lpcre2

 
 
 #------------------------------------------------------------------------------
 
 
 #------------------------------------------------------------------------------

-# Comment out the following line to remove DANE support
-# Note: Enabling this unconditionally overrides DISABLE_DNSSEC
-# forces you to have SUPPORT_TLS enabled (the default).  For DANE under
-# GnuTLS we need an additional library.  See TLS_LIBS or USE_GNUTLS_PC
-# below.
+# Comment out the following line to remove DANE support.
+# Note: DANE support requires DNSSEC support (the default) and
+# SUPPORT_TLS (the default).  For DANE under GnuTLS we need an additional
+# library.  See TLS_LIBS or USE_GNUTLS_PC below.
+

 SUPPORT_DANE=yes
 
 #------------------------------------------------------------------------------
 SUPPORT_DANE=yes
 
 #------------------------------------------------------------------------------


@@ -488,18 +492,26 @@ SUPPORT_DANE=yes
 # You do not need to use this for any lookup information added via pkg-config.
 
 # LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include
 # You do not need to use this for any lookup information added via pkg-config.
 
 # LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include

-# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3
+# LOOKUP_INCLUDE +=-I /usr/local/include
+# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3 -llmdb
+
+#------------------------------------------------------------------------------
+# If you included LOOKUP_LMDB above you will need the library. Depending
+# on where installed you may also need an include directory
+#
+# LOOKUP_INCLUDE += -I/usr/local/include
+# LOOKUP_LIBS += -llmdb

 
 
 #------------------------------------------------------------------------------
 # Compiling the Exim monitor: If you want to compile the Exim monitor, a
 # program that requires an X11 display, then EXIM_MONITOR should be set to the
 
 
 #------------------------------------------------------------------------------
 # Compiling the Exim monitor: If you want to compile the Exim monitor, a
 # program that requires an X11 display, then EXIM_MONITOR should be set to the

-# value "eximon.bin". Comment out this setting to disable compilation of the
+# value "eximon.bin". De-comment this setting to enable compilation of the

 # monitor. The locations of various X11 directories for libraries and include
 # files are defaulted in the OS/Makefile-Default file, but can be overridden in
 # local OS-specific make files.
 
 # monitor. The locations of various X11 directories for libraries and include
 # files are defaulted in the OS/Makefile-Default file, but can be overridden in
 # local OS-specific make files.
 

-EXIM_MONITOR=eximon.bin
+# EXIM_MONITOR=eximon.bin

 
 
 #------------------------------------------------------------------------------
 
 
 #------------------------------------------------------------------------------


@@ -556,18 +568,25 @@ DISABLE_MAL_MKS=yes
 # By default, Exim has support for checking the AD bit in a DNS response, to
 # determine if DNSSEC validation was successful.  If your system libraries
 # do not support that bit, then set DISABLE_DNSSEC to "yes"
 # By default, Exim has support for checking the AD bit in a DNS response, to
 # determine if DNSSEC validation was successful.  If your system libraries
 # do not support that bit, then set DISABLE_DNSSEC to "yes"

-# Note: Enabling SUPPORT_DANE unconditionally overrides this setting.
+# Note: DNSSEC is required for DANE support.

 
 # DISABLE_DNSSEC=yes
 
 # To disable support for Events set DISABLE_EVENT to "yes"
 
 # DISABLE_DNSSEC=yes
 
 # To disable support for Events set DISABLE_EVENT to "yes"

-

 # DISABLE_EVENT=yes
 
 
 # DISABLE_EVENT=yes
 
 

-# Uncomment this line to include support for early pipelining, per
+# Uncomment this line to remove support for early pipelining, per

 # https://datatracker.ietf.org/doc/draft-harris-early-pipe/
 # https://datatracker.ietf.org/doc/draft-harris-early-pipe/

-# SUPPORT_PIPE_CONNECT=yes
+# DISABLE_PIPE_CONNECT=yes
+
+
+# Uncomment the following to remove the fast-ramp two-phase-queue-run support
+# DISABLE_QUEUE_RAMP=yes
+
+# Uncomment the following lines to add SRS (Sender Rewriting Scheme) support
+# using only native facilities.
+# SUPPORT_SRS=yes

 
 
 #------------------------------------------------------------------------------
 
 
 #------------------------------------------------------------------------------


@@ -577,19 +596,10 @@ DISABLE_MAL_MKS=yes
 
 # Uncomment the following line to add support for talking to dccifd.  This
 # defaults the socket path to /usr/local/dcc/var/dccifd.
 
 # Uncomment the following line to add support for talking to dccifd.  This
 # defaults the socket path to /usr/local/dcc/var/dccifd.

-# Doing so will also explicitly turn on the WITH_CONTENT_SCAN option.
+# This support also requires WITH_CONTENT_SCAN enabled.

 
 # EXPERIMENTAL_DCC=yes
 
 
 # EXPERIMENTAL_DCC=yes
 

-# Uncomment the following lines to add SRS (Sender rewriting scheme) support.
-# You need to have libsrs_alt installed on your system (srs.mirtol.com).
-# Depending on where it is installed you may have to edit the CFLAGS and
-# LDFLAGS lines.
-
-# EXPERIMENTAL_SRS=yes
-# CFLAGS  += -I/usr/local/include
-# LDFLAGS += -lsrs_alt
-

 # Uncomment the following line to add DMARC checking capability, implemented
 # using libopendmarc libraries. You must have SPF and DKIM support enabled also.
 # SUPPORT_DMARC=yes
 # Uncomment the following line to add DMARC checking capability, implemented
 # using libopendmarc libraries. You must have SPF and DKIM support enabled also.
 # SUPPORT_DMARC=yes


@@ -598,6 +608,11 @@ DISABLE_MAL_MKS=yes
 # Uncomment the following if you need to change the default. You can
 # override it at runtime (main config option dmarc_tld_file)
 # DMARC_TLD_FILE=/etc/exim/opendmarc.tlds
 # Uncomment the following if you need to change the default. You can
 # override it at runtime (main config option dmarc_tld_file)
 # DMARC_TLD_FILE=/etc/exim/opendmarc.tlds

+#
+# Library version libopendmarc-1.4.1-1.fc33.x86_64  (on Fedora 33) is known broken;
+# 1.3.2-3 works.  It seems that the OpenDMARC project broke their API.
+# Use this option if you need to build with an old library (1.3.x)
+# DMARC_API=100300

 
 # Uncomment the following line to add ARC (Authenticated Received Chain)
 # support.  You must have SPF and DKIM support enabled also.
 
 # Uncomment the following line to add ARC (Authenticated Received Chain)
 # support.  You must have SPF and DKIM support enabled also.


@@ -615,19 +630,9 @@ DISABLE_MAL_MKS=yes
 # Uncomment the following to include extra information in fail DSN message (bounces)
 # EXPERIMENTAL_DSN_INFO=yes
 
 # Uncomment the following to include extra information in fail DSN message (bounces)
 # EXPERIMENTAL_DSN_INFO=yes
 

-# Uncomment the following to add LMDB lookup support
-# You need to have LMDB installed on your system (https://github.com/LMDB/lmdb)
-# Depending on where it is installed you may have to edit the CFLAGS and LDFLAGS lines.
-# EXPERIMENTAL_LMDB=yes
-# CFLAGS += -I/usr/local/include
-# LDFLAGS += -llmdb
-

 # Uncomment the following line to add queuefile transport support
 # EXPERIMENTAL_QUEUEFILE=yes
 
 # Uncomment the following line to add queuefile transport support
 # EXPERIMENTAL_QUEUEFILE=yes
 

-# Uncomment the following line to include support for TLS Resumption
-# EXPERIMENTAL_TLS_RESUME=yes
-

 ###############################################################################
 #                 THESE ARE THINGS YOU MIGHT WANT TO SPECIFY                  #
 ###############################################################################
 ###############################################################################
 #                 THESE ARE THINGS YOU MIGHT WANT TO SPECIFY                  #
 ###############################################################################


@@ -780,6 +785,9 @@ FIXED_NEVER_USERS=root
 # AUTH_LIBS=-lgsasl
 # AUTH_LIBS=-lgssapi -lheimntlm -lkrb5 -lhx509 -lcom_err -lhcrypto -lasn1 -lwind -lroken -lcrypt
 
 # AUTH_LIBS=-lgsasl
 # AUTH_LIBS=-lgssapi -lheimntlm -lkrb5 -lhx509 -lcom_err -lhcrypto -lasn1 -lwind -lroken -lcrypt
 

+# If using AUTH_GSASL with SCRAM methods, you should also be defining
+# SUPPORT_I18N to get standards-conformant support of utf8 normalization.
+

 
 #------------------------------------------------------------------------------
 # When Exim is decoding MIME "words" in header lines, most commonly for use
 
 #------------------------------------------------------------------------------
 # When Exim is decoding MIME "words" in header lines, most commonly for use


@@ -1480,4 +1488,13 @@ EXIM_TMPDIR="/tmp"
 
 # ENABLE_DISABLE_FSYNC=yes
 
 
 # ENABLE_DISABLE_FSYNC=yes
 

+#------------------------------------------------------------------------------
+# For development, add this to include code to time various stages and report.
+# CFLAGS += -DMEASURE_TIMING
+
+# For a very slightly smaller build, for constrained systems, uncomment this.
+# The feature involved is purely for debugging.
+
+# DISABLE_CLIENT_CMD_LOG=yes
+

 # End of EDITME for Exim 4.
 # End of EDITME for Exim 4.