-# $Cambridge: exim/src/OS/Makefile-Base,v 1.8 2005/09/12 13:50:03 ph10 Exp $
-
# This file is the basis of the main makefile for Exim and friends. The
# makefile at the top level arranges to build the main makefile by calling
# scripts/Configure-Makefile from within the build directory. This
SHELL = $(MAKE_SHELL)
SCRIPTS = ../scripts
+O = ../OS
EDITME = ../Local/Makefile
EXIMON_EDITME = ../Local/eximon.conf
# up-to-date. Then the os-specific source files and the C configuration file
# are set up, and finally it goes to the main Exim target.
-all: $(EDITME) checklocalmake Makefile os.h os.c config.h allexim
+all: utils exim
+config: $(EDITME) checklocalmake Makefile os.c config.h version.h
-checklocalmake:
+checklocalmake:
@if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
$(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
$(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
# Build (link) the os.h file
-os.h:
+os.h: $(SCRIPTS)/Configure-os.h \
+ $(O)/os.h-AIX $(O)/os.h-BSDI $(O)/os.h-cygwin \
+ $(O)/os.h-Darwin $(O)/os.h-DGUX $(O)/os.h-DragonFly \
+ $(O)/os.h-FreeBSD $(O)/os.h-GNU $(O)/os.h-GNUkFreeBSD \
+ $(O)/os.h-GNUkNetBSD $(O)/os.h-HI-OSF \
+ $(O)/os.h-HI-UX $(O)/os.h-HP-UX $(O)/os.h-HP-UX-9 \
+ $(O)/os.h-IRIX $(O)/os.h-IRIX6 $(O)/os.h-IRIX632 \
+ $(O)/os.h-IRIX65 $(O)/os.h-Linux $(O)/os.h-mips \
+ $(O)/os.h-NetBSD $(O)/os.h-NetBSD-a.out \
+ $(O)/os.h-OpenBSD $(O)/os.h-OpenUNIX $(O)/os.h-OSF1 \
+ $(O)/os.h-QNX $(O)/os.h-SCO $(O)/os.h-SCO_SV \
+ $(O)/os.h-SunOS4 $(O)/os.h-SunOS5 $(O)/os.h-SunOS5-hal \
+ $(O)/os.h-ULTRIX $(O)/os.h-UNIX_SV \
+ $(O)/os.h-Unixware7 $(O)/os.h-USG
$(SHELL) $(SCRIPTS)/Configure-os.h
# Build the os.c file
-os.c: ../src/os.c
+os.c: ../src/os.c \
+ $(SCRIPTS)/Configure-os.c \
+ $(O)/os.c-cygwin $(O)/os.c-GNU $(O)/os.c-HI-OSF \
+ $(O)/os.c-IRIX $(O)/os.c-IRIX6 $(O)/os.c-IRIX632 \
+ $(O)/os.c-IRIX65 $(O)/os.c-Linux $(O)/os.c-OSF1
$(SHELL) $(SCRIPTS)/Configure-os.c
# Build the config.h file.
# therefore always be run, even if the files exist. This shouldn't in fact be a
# problem, but it does no harm. Other make programs will just ignore this.
-.PHONY: all allexim buildauths buildlookups buildpcre buildrouters \
+.PHONY: all config utils \
+ buildauths buildlookups buildpdkim buildrouters \
buildtransports checklocalmake clean
-# This is the real default target for all the various exim binaries and
-# scripts, once the configuring stuff is done.
-
-allexim: config.h buildpcre $(EXIM_MONITOR) exicyclog exinext exiwhat \
+utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
exigrep eximstats exipick exiqgrep exiqsumm \
transport-filter.pl convert4r3 convert4r4 \
exim_checkaccess \
- exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \
- buildlookups buildrouters buildtransports \
- buildauths exim
+ exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
# Targets for special-purpose configuration header builders
# Target for the exicyclog utility script
-exicyclog: Makefile config.h ../src/exicyclog.src
+exicyclog: config ../src/exicyclog.src
@rm -f exicyclog
@sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
-e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
-e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
- -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
-e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
+ -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
+ -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
-e "s?MV_COMMAND?$(MV_COMMAND)?" \
-e "s?RM_COMMAND?$(RM_COMMAND)?" \
+ -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
../src/exicyclog.src > exicyclog-t
@mv exicyclog-t exicyclog
@chmod a+x exicyclog
@echo ">>> exicyclog script built"
# Target for the exinext utility script
-exinext: Makefile config.h ../src/exinext.src
+exinext: config ../src/exinext.src
@rm -f exinext
@sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
@echo ">>> exinext script built"
# Target for the exiwhat utility script
-exiwhat: Makefile config.h ../src/exiwhat.src
+exiwhat: config ../src/exiwhat.src
@rm -f exiwhat
@sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
@echo ">>> exiwhat script built"
# Target for the exim_checkaccess utility script
-exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
+exim_checkaccess: config ../src/exim_checkaccess.src
@rm -f exim_checkaccess
@sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
@echo ">>> exim_checkaccess script built"; echo ""
# Target for the Exim monitor start-up script
-eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \
+eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
../Local/eximon.conf
@rm -f eximon
$(SHELL) $(SCRIPTS)/Configure-eximon
OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
OBJ_WITH_OLD_DEMIME = demime.o
-OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dk.o
+OBJ_EXPERIMENTAL = bmi_spam.o \
+ dane.o \
+ dcc.o \
+ dmarc.o \
+ imap_utf7.o \
+ spf.o \
+ srs.o \
+ utf8.o
# Targets for final binaries; the main one has a build number which is
# updated each time. We don't bother with that for the auxiliaries.
+OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
+
OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
- filtertest.o globals.o \
+ filtertest.o globals.o dkim.o \
header.o host.o ip.o log.o lss.o match.o moan.o \
os.o parse.o queue.o \
rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
- store.o string.o tls.o tod.o transport.o tree.o verify.o \
+ std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
+ $(OBJ_LOOKUPS) \
local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
$(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
-exim: pcre/libpcre.a lookups/lookups.a auths/auths.a \
- routers/routers.a transports/transports.a \
- $(OBJ_EXIM) version.c
- @echo " "
- awk '{ print ($$1+1) }' cnumber.h > cnumber.temp
- rm -f cnumber.h; mv cnumber.temp cnumber.h
- @echo "$(CC) version.c"
- $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c
- rm -f exim
+exim: buildlookups buildauths pdkim/pdkim.a \
+ buildrouters buildtransports \
+ $(OBJ_EXIM) version.o
@echo "$(LNCC) -o exim"
$(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
- pcre/libpcre.a \
routers/routers.a transports/transports.a lookups/lookups.a \
- auths/auths.a \
+ auths/auths.a pdkim/pdkim.a \
$(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
$(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
- $(PERL_LIBS) $(TLS_LIBS) $(LDFLAGS)
+ $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim; \
$(STRIP_COMMAND) exim; \
OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
-exim_fixdb: $(OBJ_FIXDB)
+exim_fixdb: $(OBJ_FIXDB) buildauths
@echo "$(LNCC) -o exim_fixdb"
$(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
- $(LIBS) $(EXTRALIBS) $(DBMLIB)
+ auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_fixdb; \
$(STRIP_COMMAND) exim_fixdb; \
# The utility for locking a mailbox while messing around with it
-exim_lock: exim_lock.c
+exim_lock: exim_lock.c os.h
@echo "$(CC) exim_lock.c"
$(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
@echo "$(LNCC) -o exim_lock"
OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
-eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) pcre/libpcre.a \
+eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
../exim_monitor/em_version.c
@echo "$(CC) exim_monitor/em_version.c"
$(FE)$(CC) -o em_version.o -c \
$(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
@echo "$(LNCC) -o eximon.bin"
$(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
- $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 pcre/libpcre.a \
+ $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
$(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) eximon.bin; \
# in one. This list is overkill, but it doesn't really take much time to
# rebuild Exim on a modern computer.
-HDRS = config.h dbfunctions.h dbstuff.h exim.h functions.h globals.h local_scan.h macros.h mytypes.h structs.h
-PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h
+HDRS = config.h \
+ dbfunctions.h \
+ dbstuff.h \
+ exim.h \
+ functions.h \
+ globals.h \
+ local_scan.h \
+ macros.h \
+ mytypes.h \
+ structs.h \
+ os.h
+PHDRS = ../config.h \
+ ../dbfunctions.h \
+ ../dbstuff.h \
+ ../exim.h \
+ ../functions.h \
+ ../globals.h \
+ ../local_scan.h \
+ ../macros.h \
+ ../mytypes.h \
+ ../structs.h \
+ ../os.h
.SUFFIXES: .o .c
.c.o:; @echo "$(CC) $*.c"
$(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
+# Update Exim's version information and build the version object.
+
+version.h::
+ @../scripts/reversion
+
+cnumber.h: version.h
+
+version.o: $(HDRS) cnumber.h version.h version.c
+
# This is the dummy module for use by test compiles of individual modules. It
# contains functions such as log_write() that may be called from bits of Exim
# in the tested code.
# The local scan module depends only on its own special header, and is compiled
# from a source whose location is set by configuration.
-local_scan.o: Makefile local_scan.h ../$(LOCAL_SCAN_SOURCE)
+local_scan.o: config local_scan.h ../$(LOCAL_SCAN_SOURCE)
@echo "$(CC) local_scan.c"
$(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
smtp_out.o: $(HDRS) smtp_out.c
spool_in.o: $(HDRS) spool_in.c
spool_out.o: $(HDRS) spool_out.c
+std-crypto.o: $(HDRS) std-crypto.c
store.o: $(HDRS) store.c
string.o: $(HDRS) string.c
-tls.o: $(HDRS) tls.c tls-gnu.c tls-openssl.c
+tls.o: $(HDRS) tls.c tls-gnu.c tlscert-gnu.c tls-openssl.c tlscert-openssl.c
tod.o: $(HDRS) tod.c
transport.o: $(HDRS) transport.c
tree.o: $(HDRS) tree.c
verify.o: $(HDRS) verify.c
-
+dkim.o: $(HDRS) pdkim/pdkim.h dkim.c
# Dependencies for WITH_CONTENT_SCAN modules
# Dependencies for WITH_OLD_DEMIME modules
-demime.o: $(HDRS) demime.c
+demime.o: $(HDRS) demime.c
# Dependencies for EXPERIMENTAL_* modules
-bmi_spam.o: $(HDRS) bmi_spam.c
-spf.o: $(HDRS) spf.h spf.c
-srs.o: $(HDRS) srs.h srs.c
-dk.o: $(HDRS) dk.h dk.c
+bmi_spam.o: $(HDRS) bmi_spam.c
+dane.o: $(HDRS) dane.c dane-gnu.c dane-openssl.c
+dcc.o: $(HDRS) dcc.h dcc.c
+dmarc.o: $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
+imap_utf7.o: $(HDRS) imap_utf7.c
+spf.o: $(HDRS) spf.h spf.c
+srs.o: $(HDRS) srs.h srs.c
+utf8.o: $(HDRS) utf8.c
# The module containing tables of available lookups, routers, auths, and
# transports must be rebuilt if any of them are. However, because the makefiles
drtables.o: $(HDRS) drtables.c
+# We depend upon object files built as part of building the lookups library
+# When using parallel make, we don't have the dependency to force building
+# in the sub-directory unless we force that dependency:
+
+$(OBJ_LOOKUPS): buildlookups
# The exim monitor's private modules - the sources live in a private
# subdirectory. The final binary combines the private modules with some
../exim_monitor/`echo $@ | sed 's/o$$/c/'`
-# Targets for the various libraries that Exim uses. This coding is tedious,
-# because different versions of "make" behave in different ways with regard
-# to rebuilding. If these target names are of the form pcre/libpcre.a, for
-# example, then a forcing mechanism is required to get them obeyed each time.
-# That's fine on Solaris and other systems; the rebuilding of the exim target
-# happens only if the libraries are actually rebuilt. However, on IRIX, if
-# the target is forced, the exim target gets unnecessarily rebuilt even if
-# the .a file is not. Contrariwise, if we use dummy names, they don't interact
-# with the building of exim (and eximon.bin), but for libpcre Exim doesn't get
-# rebuilt when it should. (For the others it does, because they remove
-# drtables.o when they rebuild.) To get round this, we forcibly remove the
-# binary when it needs to be rebuilt.
-
-# The PCRE regex library. Move the pcretest program to the util directory. Some
-# "clever" versions of make notice that there are two successive shell
-# commands, and they run them in the same shell. This means that we have to
-# take care to encapsulate change of directory in parentheses, so that it
-# reverts when it should.
-
-buildpcre:
- @(cd pcre; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" \
- FE="$(FE)" CFLAGS="$(CFLAGS) $(PCRE_CFLAGS)" \
- RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)")
- @if $(SHELL) $(SCRIPTS)/newer pcre/libpcre.a exim; then \
- rm -f exim eximon.bin; fi
- @echo " "
+# Targets for the various libraries that Exim uses.
# The lookups library.
-buildlookups:
- @cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
- FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \
- echo " "
+buildlookups: config
+ @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+ CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
+ @echo " "
# The routers library.
-buildrouters:
- @cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+buildrouters: config
+ @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
- echo " "
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+ @echo " "
# The transports library.
-buildtransports:
- @cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+buildtransports: config
+ @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
- echo " "
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+ @echo " "
# The library of authorization modules
-buildauths:
- @cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+buildauths: config
+ @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
- echo " "
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+ @echo " "
+
+# The PDKIM library
+
+buildpdkim: pdkim/pdkim.a
+pdkim/pdkim.a: config
+ @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+ @echo " "
# The "clean", "install", and "makefile" targets just pass themselves back to
# the main Exim makefile. These targets will be obeyed only if "make" is obeyed
# These are the test targets themselves
test_dbfn: config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
- string.o tod.o version.o
+ string.o tod.o version.o utf8.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
$(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
dummies.o sa-globals.o sa-os.o store.o string.o \
- tod.o version.o $(LIBS) $(DBMLIB)
+ tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
rm -f dbfn.o
-test_host: config.h host.c dns.c dummies.o sa-globals.o sa-os.o store.o \
- string.o tod.o tree.o
+test_host: config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
+ store.o string.o tod.o tree.o
+ $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
$(LNCC) -o test_host $(LFLAGS) \
- host.o dns.o dummies.o sa-globals.o os.o store.o string.o tod.o tree.o \
- $(LIBS) $(LIBRESOLV)
- rm -f dummies.o host.o dns.o
+ host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
+ tod.o tree.o $(LIBS) $(LIBRESOLV)
+ rm -f child.o dummies.o host.o dns.o
-test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o
+test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
$(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
- sa-globals.o store.o string.o tod.o $(LIBS)
+ sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
rm -f os.o
test_parse: config.h parse.c dummies.o sa-globals.o \
- store.o string.o tod.o version.o
+ store.o string.o tod.o version.o utf8.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
$(LNCC) -o test_parse $(LFLAGS) parse.o \
- dummies.o sa-globals.o store.o string.o tod.o version.o
+ dummies.o sa-globals.o store.o string.o tod.o version.o \
+ utf8.o $(LDFLAGS)
rm -f parse.o
-test_string: config.h string.c dummies.o sa-globals.o store.o tod.o
+test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
$(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
- dummies.o sa-globals.o store.o tod.o $(LIBS)
+ dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
rm -f string.o
# End
git://git.exim.org / exim.git / blobdiff