/* Sanity check and validate optional args to MAIL FROM: envelope */
enum {
ENV_MAIL_OPT_SIZE, ENV_MAIL_OPT_BODY, ENV_MAIL_OPT_AUTH,
- ENV_MAIL_OPT_PRDR, ENV_MAIL_OPT_NULL
+#ifdef EXPERIMENTAL_PRDR
+ ENV_MAIL_OPT_PRDR,
+#endif
+ ENV_MAIL_OPT_NULL
};
typedef struct {
uschar * name; /* option requested during MAIL cmd */
{ US"SIZE", ENV_MAIL_OPT_SIZE, TRUE },
{ US"BODY", ENV_MAIL_OPT_BODY, TRUE },
{ US"AUTH", ENV_MAIL_OPT_AUTH, TRUE },
- { US"NULL", ENV_MAIL_OPT_NULL, FALSE } /* Placeholder for ending */
+#ifdef EXPERIMENTAL_PRDR
+ { US"PRDR", ENV_MAIL_OPT_PRDR, FALSE },
+#endif
+ { US"NULL", ENV_MAIL_OPT_NULL, FALSE }
};
/* When reading SMTP from a remote host, we have to use our own versions of the
uschar *v = smtp_cmd_data + Ustrlen(smtp_cmd_data) - 1;
while (isspace(*v)) v--;
v[1] = 0;
-
while (v > smtp_cmd_data && *v != '=' && !isspace(*v)) v--;
-if (*v != '=') return FALSE;
n = v;
-while(isalpha(n[-1])) n--;
-
-/* RFC says SP, but TAB seen in wild and other major MTAs accept it */
-if (!isspace(n[-1])) return FALSE;
-
-n[-1] = 0;
-*name = n;
+if (*v == '=')
+{
+ while(isalpha(n[-1])) n--;
+ /* RFC says SP, but TAB seen in wild and other major MTAs accept it */
+ if (!isspace(n[-1])) return FALSE;
+ n[-1] = 0;
+}
+else
+{
+ n++;
+ if (v == smtp_cmd_data) return FALSE;
+}
*v++ = 0;
+*name = n;
*value = v;
return TRUE;
}
#endif
(where == ACL_WHERE_PREDATA)? US"DATA" :
(where == ACL_WHERE_DATA)? US"after DATA" :
+#ifdef EXPERIMENTAL_PRDR
+ (where == ACL_WHERE_PRDR)? US"after DATA PRDR" :
+#endif
(smtp_cmd_data == NULL)?
string_sprintf("%s in \"connect\" ACL", acl_wherenames[where]) :
string_sprintf("%s %s", acl_wherenames[where], smtp_cmd_data);
pipelining_advertised = TRUE;
}
+
/* If any server authentication mechanisms are configured, advertise
them if the current host is in auth_advertise_hosts. The problem with
advertising always is that some clients then require users to
}
#endif
+ #ifdef EXPERIMENTAL_PRDR
+ /* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
+ if (prdr_enable) {
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-PRDR\r\n", 7);
+ }
+ #endif
+
/* Finish off the multiline reply with one that is always available. */
s = string_cat(s, &size, &ptr, smtp_code, 3);
if (tls_in.active >= 0) (void)tls_write(TRUE, s, ptr); else
#endif
- (void)fwrite(s, 1, ptr, smtp_out);
+ {
+ int i = fwrite(s, 1, ptr, smtp_out); i = i; /* compiler quietening */
+ }
DEBUG(D_receive)
{
uschar *cr;
}
if (mail_args->need_value && strcmpic(value, US"") == 0)
break;
- /* This doesn't seem right to use
- if ((char *)mail_args >= (char *)env_mail_type_list + sizeof(env_mail_type_list))
- goto BAD_MAIL_ARGS;
- */
switch(mail_args->value)
{
/* Handle SIZE= by reading the value. We don't do the check till later,
in order to be able to log the sender address on failure. */
case ENV_MAIL_OPT_SIZE:
- /* if (strcmpic(name, US"SIZE") == 0 && */
if (((size = Ustrtoul(value, &end, 10)), *end == 0))
{
if ((size == ULONG_MAX && errno == ERANGE) || size > INT_MAX)
some sites want the action that is provided. We recognize both "8BITMIME"
and "7BIT" as body types, but take no action. */
case ENV_MAIL_OPT_BODY:
- if (accept_8bitmime &&
- (strcmpic(value, US"8BITMIME") == 0 ||
- strcmpic(value, US"7BIT") == 0) )
- break;
+ if (accept_8bitmime) {
+ if (strcmpic(value, US"8BITMIME") == 0) {
+ body_8bitmime = 8;
+ } else if (strcmpic(value, US"7BIT") == 0) {
+ body_8bitmime = 7;
+ } else {
+ body_8bitmime = 0;
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"invalid data for BODY");
+ goto COMMAND_LOOP;
+ }
+ DEBUG(D_receive) debug_printf("8BITMIME: %d\n", body_8bitmime);
+ break;
+ }
arg_error = TRUE;
break;
if (auth_xtextdecode(value, &authenticated_sender) < 0)
{
/* Put back terminator overrides for error message */
- name[-1] = ' ';
value[-1] = '=';
+ name[-1] = ' ';
done = synprot_error(L_smtp_syntax_error, 501, NULL,
US"invalid data for AUTH");
goto COMMAND_LOOP;
overrides for error message */
default:
- name[-1] = ' ';
value[-1] = '=';
+ name[-1] = ' ';
(void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
log_msg);
goto COMMAND_LOOP;
}
}
break;
-
+
+#ifdef EXPERIMENTAL_PRDR
+ case ENV_MAIL_OPT_PRDR:
+ if ( prdr_enable )
+ prdr_requested = TRUE;
+ break;
+#endif
+
/* Unknown option. Stick back the terminator characters and break
- the loop. An error for a malformed address will occur. */
+ the loop. Do the name-terminator second as extract_option sets
+ value==name when it found no equal-sign.
+ An error for a malformed address will occur. */
default:
-
- /* BAD_MAIL_ARGS: */
- name[-1] = ' ';
value[-1] = '=';
+ name[-1] = ' ';
+ arg_error = TRUE;
break;
}
/* Break out of for loop if switch() had bad argument or
if (rc == OK || rc == DISCARD)
{
- if (user_msg == NULL) smtp_printf("250 OK\r\n");
- else smtp_user_msg(US"250", user_msg);
+ if (user_msg == NULL)
+ smtp_printf("%s%s%s", US"250 OK",
+ #ifdef EXPERIMENTAL_PRDR
+ prdr_requested == TRUE ? US", PRDR Requested" :
+ #endif
+ US"",
+ US"\r\n");
+ else
+ {
+ #ifdef EXPERIMENTAL_PRDR
+ if ( prdr_requested == TRUE )
+ user_msg = string_sprintf("%s%s", user_msg, US", PRDR Requested");
+ #endif
+ smtp_user_msg(US"250",user_msg);
+ }
smtp_delay_rcpt = smtp_rlr_base;
recipients_discarded = (rc == DISCARD);
was_rej_mail = FALSE;
if (rc == OK)
{
+ uschar * code;
+ code = US"354";
if (user_msg == NULL)
- smtp_printf("354 Enter message, ending with \".\" on a line by itself\r\n");
- else smtp_user_msg(US"354", user_msg);
+ smtp_printf("%s Enter message, ending with \".\" on a line by itself\r\n", code);
+ else smtp_user_msg(code, user_msg);
done = 3;
message_ended = END_NOTENDED; /* Indicate in middle of data */
}
incomplete_transaction_log(US"too many non-mail commands");
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
"nonmail commands (last was \"%.*s\")", host_and_ident(FALSE),
- s - smtp_cmd_buffer, smtp_cmd_buffer);
+ (int)(s - smtp_cmd_buffer), smtp_cmd_buffer);
smtp_notquit_exit(US"bad-commands", US"554", US"Too many nonmail commands");
done = 1; /* Pretend eof - drops connection */
break;
git://git.exim.org / exim.git / blobdiff