Tidying and compiler-silencing

[exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 21c4943299a89411d7f112c56a7ba4427d01578a..a93b3947470ad5b8da421f4a3658a896b9e35d0c 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -392,7 +392,7 @@ very wide interest.
 An &"easier"& discussion of Exim which provides more in-depth explanatory,
 introductory, and tutorial material can be found in a book entitled &'The Exim
 SMTP Mail Server'& (second edition, 2007), published by UIT Cambridge
 An &"easier"& discussion of Exim which provides more in-depth explanatory,
 introductory, and tutorial material can be found in a book entitled &'The Exim
 SMTP Mail Server'& (second edition, 2007), published by UIT Cambridge

-(&url(http://www.uit.co.uk/exim-book/)).
+(&url(https://www.uit.co.uk/exim-book/)).

 
 This book also contains a chapter that gives a general introduction to SMTP and
 Internet mail. Inevitably, however, the book is unlikely to be fully up-to-date
 
 This book also contains a chapter that gives a general introduction to SMTP and
 Internet mail. Inevitably, however, the book is unlikely to be fully up-to-date


@@ -456,7 +456,7 @@ website, are hosted at the University of Cambridge.
 .cindex "FAQ"
 As well as Exim distribution tar files, the Exim web site contains a number of
 differently formatted versions of the documentation. A recent addition to the
 .cindex "FAQ"
 As well as Exim distribution tar files, the Exim web site contains a number of
 differently formatted versions of the documentation. A recent addition to the

-online information is the Exim wiki (&url(http://wiki.exim.org)),
+online information is the Exim wiki (&url(https://wiki.exim.org)),

 which contains what used to be a separate FAQ, as well as various other
 examples, tips, and know-how that have been contributed by Exim users.
 The wiki site should always redirect to the correct place, which is currently
 which contains what used to be a separate FAQ, as well as various other
 examples, tips, and know-how that have been contributed by Exim users.
 The wiki site should always redirect to the correct place, which is currently


@@ -487,7 +487,7 @@ If you are using a Debian distribution of Exim, you may wish to subscribe to
 the Debian-specific mailing list &'pkg-exim4-users@lists.alioth.debian.org'&
 via this web page:
 .display
 the Debian-specific mailing list &'pkg-exim4-users@lists.alioth.debian.org'&
 via this web page:
 .display

-&url(http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users)
+&url(https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/pkg-exim4-users)

 .endd
 Please ask Debian-specific questions on this list and not on the general Exim
 lists.
 .endd
 Please ask Debian-specific questions on this list and not on the general Exim
 lists.


@@ -509,14 +509,14 @@ message to the &'exim-dev'& mailing list and have it discussed.
 .cindex "distribution" "https site"
 The master distribution site for the Exim distribution is
 .display
 .cindex "distribution" "https site"
 The master distribution site for the Exim distribution is
 .display

-&*https://downloads.exim.org/*&
+&url(https://downloads.exim.org/)

 .endd
 The service is available over HTTPS, HTTP and FTP.
 We encourage people to migrate to HTTPS.
 
 .endd
 The service is available over HTTPS, HTTP and FTP.
 We encourage people to migrate to HTTPS.
 

-The content served at &'https://downloads.exim.org/'& is identical to the
-content served at &'https://ftp.exim.org/pub/exim'& and
-&'ftp://ftp.exim.org/pub/exim'&.
+The content served at &url(https://downloads.exim.org/) is identical to the
+content served at &url(https://ftp.exim.org/pub/exim) and
+&url(ftp://ftp.exim.org/pub/exim).

 
 If accessing via a hostname containing &'ftp'&, then the file references that
 follow are relative to the &_exim_& directories at these sites.
 
 If accessing via a hostname containing &'ftp'&, then the file references that
 follow are relative to the &_exim_& directories at these sites.


@@ -771,7 +771,7 @@ Foundation; either version 2 of the License, or (at your option) any later
 version.
 This code implements Dan Bernstein's Constant DataBase (cdb) spec. Information,
 the spec and sample code for cdb can be obtained from
 version.
 This code implements Dan Bernstein's Constant DataBase (cdb) spec. Information,
 the spec and sample code for cdb can be obtained from

-&url(http://www.pobox.com/~djb/cdb.html). This implementation borrows
+&url(https://cr.yp.to/cdb.html). This implementation borrows

 some code from Dan Bernstein's implementation (which has no license
 restrictions applied to it).
 .endblockquote
 some code from Dan Bernstein's implementation (which has no license
 restrictions applied to it).
 .endblockquote


@@ -825,7 +825,7 @@ Redistributions of any form whatsoever must retain the following
 acknowledgment:
 
 &"This product includes software developed by Computing Services
 acknowledgment:
 
 &"This product includes software developed by Computing Services

-at Carnegie Mellon University (&url(http://www.cmu.edu/computing/)."&
+at Carnegie Mellon University (&url(https://www.cmu.edu/computing/)."&

 
 CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
 THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
 
 CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
 THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY


@@ -1364,6 +1364,7 @@ order in which they are tested. The individual configuration options are
 described in more detail in chapter &<<CHAProutergeneric>>&.
 
 .ilist
 described in more detail in chapter &<<CHAProutergeneric>>&.
 
 .ilist

+.cindex affix "router precondition"

 The &%local_part_prefix%& and &%local_part_suffix%& options can specify that
 the local parts handled by the router may or must have certain prefixes and/or
 suffixes. If a mandatory affix (prefix or suffix) is not present, the router is
 The &%local_part_prefix%& and &%local_part_suffix%& options can specify that
 the local parts handled by the router may or must have certain prefixes and/or
 suffixes. If a mandatory affix (prefix or suffix) is not present, the router is


@@ -1400,6 +1401,7 @@ of domains that it defines.
 .vindex "&$local_part_prefix$&"
 .vindex "&$local_part$&"
 .vindex "&$local_part_suffix$&"
 .vindex "&$local_part_prefix$&"
 .vindex "&$local_part$&"
 .vindex "&$local_part_suffix$&"

+.cindex affix "router precondition"

 If the &%local_parts%& option is set, the local part of the address must be in
 the set of local parts that it defines. If &%local_part_prefix%& or
 &%local_part_suffix%& is in use, the prefix or suffix is removed from the local
 If the &%local_parts%& option is set, the local part of the address must be in
 the set of local parts that it defines. If &%local_part_prefix%& or
 &%local_part_suffix%& is in use, the prefix or suffix is removed from the local


@@ -1696,7 +1698,7 @@ or set PCRE_CONFIG=yes to use the installed &(pcre-config)& command.
 If your operating system has no
 PCRE support then you will need to obtain and build the current PCRE
 from &url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/).
 If your operating system has no
 PCRE support then you will need to obtain and build the current PCRE
 from &url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/).

-More information on PCRE is available at &url(http://www.pcre.org/).
+More information on PCRE is available at &url(https://www.pcre.org/).

 
 .section "DBM libraries" "SECTdb"
 .cindex "DBM libraries" "discussion of"
 
 .section "DBM libraries" "SECTdb"
 .cindex "DBM libraries" "discussion of"


@@ -1749,14 +1751,18 @@ the traditional &'ndbm'& interface.
 .next
 To complicate things further, there are several very different versions of the
 Berkeley DB package. Version 1.85 was stable for a very long time, releases
 .next
 To complicate things further, there are several very different versions of the
 Berkeley DB package. Version 1.85 was stable for a very long time, releases

-2.&'x'& and 3.&'x'& were current for a while, but the latest versions are now
-numbered 4.&'x'&. Maintenance of some of the earlier releases has ceased. All
-versions of Berkeley DB can be obtained from
-&url(http://www.sleepycat.com/).
+2.&'x'& and 3.&'x'& were current for a while, but the latest versions when Exim last revamped support were numbered 4.&'x'&.
+Maintenance of some of the earlier releases has ceased. All versions of
+Berkeley DB could be obtained from
+&url(http://www.sleepycat.com/), which is now a redirect to their new owner's
+page with far newer versions listed.
+It is probably wise to plan to move your storage configurations away from
+Berkeley DB format, as today there are smaller and simpler alternatives more
+suited to Exim's usage model.

 .next
 .cindex "&'tdb'& DBM library"
 Yet another DBM library, called &'tdb'&, is available from
 .next
 .cindex "&'tdb'& DBM library"
 Yet another DBM library, called &'tdb'&, is available from

-&url(http://download.sourceforge.net/tdb). It has its own interface, and also
+&url(https://sourceforge.net/projects/tdb/files/). It has its own interface, and also

 operates on a single file.
 .endlist
 
 operates on a single file.
 .endlist
 


@@ -1869,7 +1875,7 @@ supports the &[iconv()]& function.
 
 However, some of the operating systems that supply &[iconv()]& do not support
 very many conversions. The GNU &%libiconv%& library (available from
 
 However, some of the operating systems that supply &[iconv()]& do not support
 very many conversions. The GNU &%libiconv%& library (available from

-&url(http://www.gnu.org/software/libiconv/)) can be installed on such
+&url(https://www.gnu.org/software/libiconv/)) can be installed on such

 systems to remedy this deficiency, as well as on systems that do not supply
 &[iconv()]& at all. After installing &%libiconv%&, you should add
 .code
 systems to remedy this deficiency, as well as on systems that do not supply
 &[iconv()]& at all. After installing &%libiconv%&, you should add
 .code


@@ -2896,12 +2902,14 @@ actually being delivered.
 
 .vitem &%-bfp%&&~<&'prefix'&>
 .oindex "&%-bfp%&"
 
 .vitem &%-bfp%&&~<&'prefix'&>
 .oindex "&%-bfp%&"

+.cindex affix "filter testing"

 This sets the prefix of the local part of the recipient address when a filter
 file is being tested by means of the &%-bf%& option. The default is an empty
 prefix.
 
 .vitem &%-bfs%&&~<&'suffix'&>
 .oindex "&%-bfs%&"
 This sets the prefix of the local part of the recipient address when a filter
 file is being tested by means of the &%-bf%& option. The default is an empty
 prefix.
 
 .vitem &%-bfs%&&~<&'suffix'&>
 .oindex "&%-bfs%&"

+.cindex affix "filter testing"

 This sets the suffix of the local part of the recipient address when a filter
 file is being tested by means of the &%-bf%& option. The default is an empty
 suffix.
 This sets the suffix of the local part of the recipient address when a filter
 file is being tested by means of the &%-bf%& option. The default is an empty
 suffix.


@@ -2957,7 +2965,7 @@ acceptable or not. See section &<<SECTcheckaccess>>&.
 Features such as authentication and encryption, where the client input is not
 plain text, cannot easily be tested with &%-bh%&. Instead, you should use a
 specialized SMTP test program such as
 Features such as authentication and encryption, where the client input is not
 plain text, cannot easily be tested with &%-bh%&. Instead, you should use a
 specialized SMTP test program such as

-&url(http://jetmore.org/john/code/#swaks,swaks).
+&url(https://www.jetmore.org/john/code/swaks/,swaks).

 
 .vitem &%-bhc%&&~<&'IP&~address'&>
 .oindex "&%-bhc%&"
 
 .vitem &%-bhc%&&~<&'IP&~address'&>
 .oindex "&%-bhc%&"


@@ -3966,8 +3974,17 @@ the messages are active, their status is not altered. This option can be used
 only by an admin user or by the user who originally caused the message to be
 placed on the queue.
 
 only by an admin user or by the user who originally caused the message to be
 placed on the queue.
 

+. .new
+. .vitem &%-MS%&
+. .oindex "&%-MS%&"
+. .cindex REQUIRETLS
+. This option is used to request REQUIRETLS processing on the message.
+. It is used internally by Exim in conjunction with -E when generating
+. a bounce message.
+. .wen
+

 .vitem &%-Mset%&&~<&'message&~id'&>
 .vitem &%-Mset%&&~<&'message&~id'&>

-.oindex "&%-Mset%&
+.oindex "&%-Mset%&"

 .cindex "testing" "string expansion"
 .cindex "expansion" "testing"
 This option is useful only in conjunction with &%-be%& (that is, when testing
 .cindex "testing" "string expansion"
 .cindex "expansion" "testing"
 This option is useful only in conjunction with &%-be%& (that is, when testing


@@ -5067,6 +5084,7 @@ The following classes of macros are defined:
 &` _DRIVER_ROUTER_*           `&  router drivers
 &` _DRIVER_TRANSPORT_*        `&  transport drivers
 &` _DRIVER_AUTHENTICATOR_*    `&  authenticator drivers
 &` _DRIVER_ROUTER_*           `&  router drivers
 &` _DRIVER_TRANSPORT_*        `&  transport drivers
 &` _DRIVER_AUTHENTICATOR_*    `&  authenticator drivers

+&` _LOG_*                     `&  log_selector values

 &` _OPT_MAIN_*                `&  main config options
 &` _OPT_ROUTERS_*             `&  generic router options
 &` _OPT_TRANSPORTS_*          `&  generic transport options
 &` _OPT_MAIN_*                `&  main config options
 &` _OPT_ROUTERS_*             `&  generic router options
 &` _OPT_TRANSPORTS_*          `&  generic transport options


@@ -6325,6 +6343,9 @@ online Perl manpages, in
 many Perl reference books, and also in
 Jeffrey Friedl's &'Mastering Regular Expressions'&, which is published by
 O'Reilly (see &url(http://www.oreilly.com/catalog/regex2/)).
 many Perl reference books, and also in
 Jeffrey Friedl's &'Mastering Regular Expressions'&, which is published by
 O'Reilly (see &url(http://www.oreilly.com/catalog/regex2/)).

+. --- the http: URL here redirects to another page with the ISBN in the URL
+. --- where trying to use https: just redirects back to http:, so sticking
+. --- to the old URL for now.  2018-09-07.

 
 The documentation for the syntax and semantics of the regular expressions that
 are supported by PCRE is included in the PCRE distribution, and no further
 
 The documentation for the syntax and semantics of the regular expressions that
 are supported by PCRE is included in the PCRE distribution, and no further


@@ -6491,13 +6512,15 @@ The following single-key lookup types are implemented:
 string without a terminating binary zero. The cdb format is designed for
 indexed files that are read frequently and never updated, except by total
 re-creation. As such, it is particularly suitable for large files containing
 string without a terminating binary zero. The cdb format is designed for
 indexed files that are read frequently and never updated, except by total
 re-creation. As such, it is particularly suitable for large files containing

-aliases or other indexed data referenced by an MTA. Information about cdb can
-be found in several places:
+aliases or other indexed data referenced by an MTA. Information about cdb and
+tools for building the files can be found in several places:

 .display
 .display

-&url(http://www.pobox.com/~djb/cdb.html)
-&url(ftp://ftp.corpit.ru/pub/tinycdb/)
-&url(http://packages.debian.org/stable/utils/freecdb.html)
+&url(https://cr.yp.to/cdb.html)
+&url(http://www.corpit.ru/mjt/tinycdb.html)
+&url(https://packages.debian.org/stable/utils/freecdb)
+&url(https://github.com/philpennock/cdbtools) (in Go)

 .endd
 .endd

+. --- 2018-09-07: corpit.ru http:-only

 A cdb distribution is not needed in order to build Exim with cdb support,
 because the code for reading cdb files is included directly in Exim itself.
 However, no means of building or testing cdb files is provided with Exim, so
 A cdb distribution is not needed in order to build Exim with cdb support,
 because the code for reading cdb files is included directly in Exim itself.
 However, no means of building or testing cdb files is provided with Exim, so


@@ -6778,6 +6801,7 @@ not likely to be useful in normal operation.
 .next
 .cindex "whoson lookup type"
 .cindex "lookup" "whoson"
 .next
 .cindex "whoson lookup type"
 .cindex "lookup" "whoson"

+. --- still http:-only, 2018-09-07

 &(whoson)&: &'Whoson'& (&url(http://whoson.sourceforge.net)) is a protocol that
 allows a server to check whether a particular (dynamically allocated) IP
 address is currently allocated to a known (trusted) user and, optionally, to
 &(whoson)&: &'Whoson'& (&url(http://whoson.sourceforge.net)) is a protocol that
 allows a server to check whether a particular (dynamically allocated) IP
 address is currently allocated to a known (trusted) user and, optionally, to


@@ -9628,9 +9652,10 @@ some of the braces:
 .code
 ${length_<n>:<string>}
 .endd
 .code
 ${length_<n>:<string>}
 .endd

-The result of this item is either the first <&'n'&> characters or the whole
+The result of this item is either the first <&'n'&> bytes or the whole

 of <&'string2'&>, whichever is the shorter. Do not confuse &%length%& with
 &%strlen%&, which gives the length of a string.
 of <&'string2'&>, whichever is the shorter. Do not confuse &%length%& with
 &%strlen%&, which gives the length of a string.

+All measurement is done in bytes and is not UTF-8 aware.

 
 
 .vitem "&*${listextract{*&<&'number'&>&*}&&&
 
 
 .vitem "&*${listextract{*&<&'number'&>&*}&&&


@@ -10062,6 +10087,8 @@ ${sg{1=A 4=D 3=C}{\N(\d+)=\N}{K\$1=}}
 yields &"K1=A K4=D K3=C"&. Note the use of &`\N`& to protect the contents of
 the regular expression from string expansion.
 
 yields &"K1=A K4=D K3=C"&. Note the use of &`\N`& to protect the contents of
 the regular expression from string expansion.
 

+The regular expression is compiled in 8-bit mode, working against bytes
+rather than any Unicode-aware character handling.

 
 
 .vitem &*${sort{*&<&'string'&>&*}{*&<&'comparator'&>&*}{*&<&'extractor'&>&*}}*&
 
 
 .vitem &*${sort{*&<&'string'&>&*}{*&<&'comparator'&>&*}{*&<&'extractor'&>&*}}*&


@@ -10118,11 +10145,11 @@ ${substr{3}{2}{$local_part}}
 If the starting offset is greater than the string length the result is the
 null string; if the length plus starting offset is greater than the string
 length, the result is the right-hand part of the string, starting from the
 If the starting offset is greater than the string length the result is the
 null string; if the length plus starting offset is greater than the string
 length, the result is the right-hand part of the string, starting from the

-given offset. The first character in the string has offset zero.
+given offset. The first byte (character) in the string has offset zero.

 
 The &%substr%& expansion item can take negative offset values to count
 
 The &%substr%& expansion item can take negative offset values to count

-from the right-hand end of its operand. The last character is offset -1, the
-second-last is offset -2, and so on. Thus, for example,
+from the right-hand end of its operand. The last byte (character) is offset -1,
+the second-last is offset -2, and so on. Thus, for example,

 .code
 ${substr{-5}{2}{1234567}}
 .endd
 .code
 ${substr{-5}{2}{1234567}}
 .endd


@@ -10139,7 +10166,7 @@ ${substr{-3}{2}{12}}
 yields &"1"&.
 
 When the second number is omitted from &%substr%&, the remainder of the string
 yields &"1"&.
 
 When the second number is omitted from &%substr%&, the remainder of the string

-is taken if the offset is positive. If it is negative, all characters in the
+is taken if the offset is positive. If it is negative, all bytes (characters) in the

 string preceding the offset point are taken. For example, an offset of -1 and
 no length, as in these semantically identical examples:
 .code
 string preceding the offset point are taken. For example, an offset of -1 and
 no length, as in these semantically identical examples:
 .code


@@ -10148,13 +10175,15 @@ ${substr{-1}{abcde}}
 .endd
 yields all but the last character of the string, that is, &"abcd"&.
 
 .endd
 yields all but the last character of the string, that is, &"abcd"&.
 

+All measurement is done in bytes and is not UTF-8 aware.
+

 
 
 .vitem "&*${tr{*&<&'subject'&>&*}{*&<&'characters'&>&*}&&&
         {*&<&'replacements'&>&*}}*&"
 .cindex "expansion" "character translation"
 .cindex "&%tr%& expansion item"
 
 
 .vitem "&*${tr{*&<&'subject'&>&*}{*&<&'characters'&>&*}&&&
         {*&<&'replacements'&>&*}}*&"
 .cindex "expansion" "character translation"
 .cindex "&%tr%& expansion item"

-This item does single-character translation on its subject string. The second
+This item does single-character (in bytes) translation on its subject string. The second

 argument is a list of characters to be translated in the subject string. Each
 matching character is replaced by the corresponding character from the
 replacement list. For example
 argument is a list of characters to be translated in the subject string. Each
 matching character is replaced by the corresponding character from the
 replacement list. For example


@@ -10165,6 +10194,9 @@ yields &`1b3de1`&. If there are duplicates in the second character string, the
 last occurrence is used. If the third string is shorter than the second, its
 last character is replicated. However, if it is empty, no translation takes
 place.
 last occurrence is used. If the third string is shorter than the second, its
 last character is replicated. However, if it is empty, no translation takes
 place.

+
+All character handling is done in bytes and is not UTF-8 aware.
+

 .endlist
 
 
 .endlist
 
 


@@ -10184,6 +10216,8 @@ The string is interpreted as an RFC 2822 address, as it might appear in a
 header line, and the effective address is extracted from it. If the string does
 not parse successfully, the result is empty.
 
 header line, and the effective address is extracted from it. If the string does
 not parse successfully, the result is empty.
 

+The parsing correctly handles SMTPUTF8 Unicode in the string.
+

 
 .vitem &*${addresses:*&<&'string'&>&*}*&
 .cindex "expansion" "RFC 2822 address handling"
 
 .vitem &*${addresses:*&<&'string'&>&*}*&
 .cindex "expansion" "RFC 2822 address handling"


@@ -10227,7 +10261,7 @@ It does not see the comma because it's still encoded as "=2C".  The second
 example below is passed the contents of &`$header_from:`&, meaning it gets
 de-mimed. Exim sees the decoded "," so it treats it as &*two*& email addresses.
 The third example shows that the presence of a comma is skipped when it is
 example below is passed the contents of &`$header_from:`&, meaning it gets
 de-mimed. Exim sees the decoded "," so it treats it as &*two*& email addresses.
 The third example shows that the presence of a comma is skipped when it is

-quoted.
+quoted.  The fourth example shows SMTPUTF8 handling.

 .code
 # exim -be '${addresses:From: \
 =?iso-8859-2?Q?Last=2C_First?= <user@example.com>}'
 .code
 # exim -be '${addresses:From: \
 =?iso-8859-2?Q?Last=2C_First?= <user@example.com>}'


@@ -10236,6 +10270,8 @@ user@example.com
 Last:user@example.com
 # exim -be '${addresses:From: "Last, First" <user@example.com>}'
 user@example.com
 Last:user@example.com
 # exim -be '${addresses:From: "Last, First" <user@example.com>}'
 user@example.com

+# exim -be '${addresses:フィル <フィリップ@example.jp>}'
+フィリップ@example.jp

 .endd
 
 .vitem &*${base32:*&<&'digits'&>&*}*&
 .endd
 
 .vitem &*${base32:*&<&'digits'&>&*}*&


@@ -10467,6 +10503,7 @@ This forces the letters in the string into lower-case, for example:
 .code
 ${lc:$local_part}
 .endd
 .code
 ${lc:$local_part}
 .endd

+Case is defined per the system C locale.

 
 .vitem &*${length_*&<&'number'&>&*:*&<&'string'&>&*}*&
 .cindex "expansion" "string truncation"
 
 .vitem &*${length_*&<&'number'&>&*:*&<&'string'&>&*}*&
 .cindex "expansion" "string truncation"


@@ -10480,6 +10517,7 @@ ${length{<number>}{<string>}}
 See the description of the general &%length%& item above for details. Note that
 &%length%& is not the same as &%strlen%&. The abbreviation &%l%& can be used
 when &%length%& is used as an operator.
 See the description of the general &%length%& item above for details. Note that
 &%length%& is not the same as &%strlen%&. The abbreviation &%l%& can be used
 when &%length%& is used as an operator.

+All measurement is done in bytes and is not UTF-8 aware.

 
 
 .vitem &*${listcount:*&<&'string'&>&*}*&
 
 
 .vitem &*${listcount:*&<&'string'&>&*}*&


@@ -10507,6 +10545,7 @@ matching list is returned.
 The string is interpreted as an RFC 2822 address and the local part is
 extracted from it. If the string does not parse successfully, the result is
 empty.
 The string is interpreted as an RFC 2822 address and the local part is
 extracted from it. If the string does not parse successfully, the result is
 empty.

+The parsing correctly handles SMTPUTF8 Unicode in the string.

 
 
 .vitem &*${mask:*&<&'IP&~address'&>&*/*&<&'bit&~count'&>&*}*&
 
 
 .vitem &*${mask:*&<&'IP&~address'&>&*/*&<&'bit&~count'&>&*}*&


@@ -10589,6 +10628,10 @@ example, a plus sign would not cause quoting (but it would for &%quote%&).
 If you are creating a new email address from the contents of &$local_part$&
 (or any other unknown data), you should always use this operator.
 
 If you are creating a new email address from the contents of &$local_part$&
 (or any other unknown data), you should always use this operator.
 

+This quoting determination is not SMTPUTF8-aware, thus quoting non-ASCII data
+will likely use the quoting form.
+Thus &'${quote_local_part:フィル}'& will always become &'"フィル"'&.
+

 
 .vitem &*${quote_*&<&'lookup-type'&>&*:*&<&'string'&>&*}*&
 .cindex "quoting" "lookup-specific"
 
 .vitem &*${quote_*&<&'lookup-type'&>&*:*&<&'string'&>&*}*&
 .cindex "quoting" "lookup-specific"


@@ -10752,6 +10795,7 @@ Now deprecated, a synonym for the &%base64%& expansion operator.
 .cindex "&%strlen%& expansion item"
 The item is replace by the length of the expanded string, expressed as a
 decimal number. &*Note*&: Do not confuse &%strlen%& with &%length%&.
 .cindex "&%strlen%& expansion item"
 The item is replace by the length of the expanded string, expressed as a
 decimal number. &*Note*&: Do not confuse &%strlen%& with &%length%&.

+All measurement is done in bytes and is not UTF-8 aware.

 
 
 .vitem &*${substr_*&<&'start'&>&*_*&<&'length'&>&*:*&<&'string'&>&*}*&
 
 
 .vitem &*${substr_*&<&'start'&>&*_*&<&'length'&>&*:*&<&'string'&>&*}*&


@@ -10766,6 +10810,7 @@ ${substr{<start>}{<length>}{<string>}}
 .endd
 See the description of the general &%substr%& item above for details. The
 abbreviation &%s%& can be used when &%substr%& is used as an operator.
 .endd
 See the description of the general &%substr%& item above for details. The
 abbreviation &%s%& can be used when &%substr%& is used as an operator.

+All measurement is done in bytes and is not UTF-8 aware.

 
 .vitem &*${time_eval:*&<&'string'&>&*}*&
 .cindex "&%time_eval%& expansion item"
 
 .vitem &*${time_eval:*&<&'string'&>&*}*&
 .cindex "&%time_eval%& expansion item"


@@ -10788,6 +10833,7 @@ number of larger units and output in Exim's normal time format, for example,
 .cindex "expansion" "case forcing"
 .cindex "&%uc%& expansion item"
 This forces the letters in the string into upper-case.
 .cindex "expansion" "case forcing"
 .cindex "&%uc%& expansion item"
 This forces the letters in the string into upper-case.

+Case is defined per the system C locale.

 
 .vitem &*${utf8clean:*&<&'string'&>&*}*&
 .cindex "correction of invalid utf-8 sequences in strings"
 
 .vitem &*${utf8clean:*&<&'string'&>&*}*&
 .cindex "correction of invalid utf-8 sequences in strings"


@@ -10796,6 +10842,20 @@ This forces the letters in the string into upper-case.
 .cindex "expansion" "utf-8 forcing"
 .cindex "&%utf8clean%& expansion item"
 This replaces any invalid utf-8 sequence in the string by the character &`?`&.
 .cindex "expansion" "utf-8 forcing"
 .cindex "&%utf8clean%& expansion item"
 This replaces any invalid utf-8 sequence in the string by the character &`?`&.

+.new
+In versions of Exim before 4.92, this did not correctly do so for a truncated
+final codepoint's encoding, and the character would be silently dropped.
+If you must handle detection of this scenario across both sets of Exim behavior,
+the complexity will depend upon the task.
+For instance, to detect if the first character is multibyte and a 1-byte
+extraction can be successfully used as a path component (as is common for
+dividing up delivery folders), you might use:
+.code
+condition = ${if inlist{${utf8clean:${length_1:$local_part}}}{:?}{yes}{no}}
+.endd
+(which will false-positive if the first character of the local part is a
+literal question mark).
+.wen

 
 .vitem "&*${utf8_domain_to_alabel:*&<&'string'&>&*}*&" &&&
        "&*${utf8_domain_from_alabel:*&<&'string'&>&*}*&" &&&
 
 .vitem "&*${utf8_domain_to_alabel:*&<&'string'&>&*}*&" &&&
        "&*${utf8_domain_from_alabel:*&<&'string'&>&*}*&" &&&


@@ -11018,7 +11078,8 @@ the header name must be terminated by a colon if white space does not follow.
 .cindex "&%eqi%& expansion condition"
 The two substrings are first expanded. The condition is true if the two
 resulting strings are identical. For &%eq%& the comparison includes the case of
 .cindex "&%eqi%& expansion condition"
 The two substrings are first expanded. The condition is true if the two
 resulting strings are identical. For &%eq%& the comparison includes the case of

-letters, whereas for &%eqi%& the comparison is case-independent.
+letters, whereas for &%eqi%& the comparison is case-independent, where
+case is defined per the system C locale.

 
 .vitem &*exists&~{*&<&'file&~name'&>&*}*&
 .cindex "expansion" "file existence test"
 
 .vitem &*exists&~{*&<&'file&~name'&>&*}*&
 .cindex "expansion" "file existence test"


@@ -11081,6 +11142,7 @@ The two substrings are first expanded. The condition is true if the first
 string is lexically greater than or equal to the second string. For &%ge%& the
 comparison includes the case of letters, whereas for &%gei%& the comparison is
 case-independent.
 string is lexically greater than or equal to the second string. For &%ge%& the
 comparison includes the case of letters, whereas for &%gei%& the comparison is
 case-independent.

+Case and collation order are defined per the system C locale.

 
 .vitem &*gt&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
        &*gti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 
 .vitem &*gt&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
        &*gti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&


@@ -11092,6 +11154,7 @@ The two substrings are first expanded. The condition is true if the first
 string is lexically greater than the second string. For &%gt%& the comparison
 includes the case of letters, whereas for &%gti%& the comparison is
 case-independent.
 string is lexically greater than the second string. For &%gt%& the comparison
 includes the case of letters, whereas for &%gti%& the comparison is
 case-independent.

+Case and collation order are defined per the system C locale.

 
 .vitem &*inlist&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
        &*inlisti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 
 .vitem &*inlist&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
        &*inlisti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&


@@ -11100,6 +11163,7 @@ case-independent.
 Both strings are expanded; the second string is treated as a list of simple
 strings; if the first string is a member of the second, then the condition
 is true.
 Both strings are expanded; the second string is treated as a list of simple
 strings; if the first string is a member of the second, then the condition
 is true.

+For the case-independent &%inlisti%& condition, case is defined per the system C locale.

 
 These are simpler to use versions of the more powerful &*forany*& condition.
 Examples, and the &*forany*& equivalents:
 
 These are simpler to use versions of the more powerful &*forany*& condition.
 Examples, and the &*forany*& equivalents:


@@ -11166,6 +11230,7 @@ The two substrings are first expanded. The condition is true if the first
 string is lexically less than or equal to the second string. For &%le%& the
 comparison includes the case of letters, whereas for &%lei%& the comparison is
 case-independent.
 string is lexically less than or equal to the second string. For &%le%& the
 comparison includes the case of letters, whereas for &%lei%& the comparison is
 case-independent.

+Case and collation order are defined per the system C locale.

 
 .vitem &*lt&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
        &*lti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 
 .vitem &*lt&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
        &*lti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&


@@ -11177,6 +11242,7 @@ The two substrings are first expanded. The condition is true if the first
 string is lexically less than the second string. For &%lt%& the comparison
 includes the case of letters, whereas for &%lti%& the comparison is
 case-independent.
 string is lexically less than the second string. For &%lt%& the comparison
 includes the case of letters, whereas for &%lti%& the comparison is
 case-independent.

+Case and collation order are defined per the system C locale.

 
 
 .vitem &*match&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 
 
 .vitem &*match&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&


@@ -11203,6 +11269,8 @@ metacharacter, but if there is no circumflex, the expression is not anchored,
 and it may match anywhere in the subject, not just at the start. If you want
 the pattern to match at the end of the subject, you must include the &`$`&
 metacharacter at an appropriate point.
 and it may match anywhere in the subject, not just at the start. If you want
 the pattern to match at the end of the subject, you must include the &`$`&
 metacharacter at an appropriate point.

+All character handling is done in bytes and is not UTF-8 aware,
+but we might change this in a future Exim release.

 
 .cindex "numerical variables (&$1$& &$2$& etc)" "in &%if%& expansion"
 At the start of an &%if%& expansion the values of the numeric variable
 
 .cindex "numerical variables (&$1$& &$2$& etc)" "in &%if%& expansion"
 At the start of an &%if%& expansion the values of the numeric variable


@@ -11317,7 +11385,7 @@ matched using &%match_ip%&.
 .cindex "expansion" "PAM authentication test"
 .cindex "&%pam%& expansion condition"
 &'Pluggable Authentication Modules'&
 .cindex "expansion" "PAM authentication test"
 .cindex "&%pam%& expansion condition"
 &'Pluggable Authentication Modules'&

-(&url(http://www.kernel.org/pub/linux/libs/pam/)) are a facility that is
+(&url(https://mirrors.edge.kernel.org/pub/linux/libs/pam/)) are a facility that is

 available in the latest releases of Solaris and in some GNU/Linux
 distributions. The Exim support, which is intended for use in conjunction with
 the SMTP AUTH command, is available only if Exim is compiled with
 available in the latest releases of Solaris and in some GNU/Linux
 distributions. The Exim support, which is intended for use in conjunction with
 the SMTP AUTH command, is available only if Exim is compiled with


@@ -11350,11 +11418,7 @@ server_condition = ${if pam{$auth2:${sg{$auth3}{:}{::}}}}
 In some operating systems, PAM authentication can be done only from a process
 running as root. Since Exim is running as the Exim user when receiving
 messages, this means that PAM cannot be used directly in those systems.
 In some operating systems, PAM authentication can be done only from a process
 running as root. Since Exim is running as the Exim user when receiving
 messages, this means that PAM cannot be used directly in those systems.

-A patched version of the &'pam_unix'& module that comes with the
-Linux PAM package is available from &url(http://www.e-admin.de/pam_exim/).
-The patched module allows one special uid/gid combination, in addition to root,
-to authenticate. If you build the patched module to allow the Exim user and
-group, PAM can then be used from an Exim authenticator.
+. --- 2018-09-07: the pam_exim modified variant has gone, removed claims re using Exim via that

 
 
 .vitem &*pwcheck&~{*&<&'string1'&>&*:*&<&'string2'&>&*}*&
 
 
 .vitem &*pwcheck&~{*&<&'string1'&>&*:*&<&'string2'&>&*}*&


@@ -12037,6 +12101,7 @@ once.
 
 .vindex "&$local_part_prefix$&"
 .vindex "&$local_part_suffix$&"
 
 .vindex "&$local_part_prefix$&"
 .vindex "&$local_part_suffix$&"

+.cindex affix variables

 If a local part prefix or suffix has been recognized, it is not included in the
 value of &$local_part$& during routing and subsequent delivery. The values of
 any prefix or suffix are in &$local_part_prefix$& and
 If a local part prefix or suffix has been recognized, it is not included in the
 value of &$local_part$& during routing and subsequent delivery. The values of
 any prefix or suffix are in &$local_part_prefix$& and


@@ -12089,6 +12154,7 @@ variable expands to nothing.
 
 .vitem &$local_part_prefix$&
 .vindex "&$local_part_prefix$&"
 
 .vitem &$local_part_prefix$&
 .vindex "&$local_part_prefix$&"

+.cindex affix variables

 When an address is being routed or delivered, and a
 specific prefix for the local part was recognized, it is available in this
 variable, having been removed from &$local_part$&.
 When an address is being routed or delivered, and a
 specific prefix for the local part was recognized, it is available in this
 variable, having been removed from &$local_part$&.


@@ -14143,7 +14209,7 @@ feel that in today's Internet, this causes more problems than it solves.
 It now defaults to true.
 A more detailed analysis of the issues is provided by Dan Bernstein:
 .display
 It now defaults to true.
 A more detailed analysis of the issues is provided by Dan Bernstein:
 .display

-&url(http://cr.yp.to/smtp/8bitmime.html)
+&url(https://cr.yp.to/smtp/8bitmime.html)

 .endd
 
 To log received 8BITMIME status use
 .endd
 
 To log received 8BITMIME status use


@@ -15124,7 +15190,7 @@ This option will let GnuTLS (2.12.0 or later) autoload PKCS11 modules with
 the p11-kit configuration files in &_/etc/pkcs11/modules/_&.
 
 See
 the p11-kit configuration files in &_/etc/pkcs11/modules/_&.
 
 See

-&url(http://www.gnutls.org/manual/gnutls.html#Smart-cards-and-HSMs)
+&url(https://www.gnutls.org/manual/gnutls.html#Smart-cards-and-HSMs)

 for documentation.
 
 
 for documentation.
 
 


@@ -18204,6 +18270,7 @@ and &%user%& and the discussion in chapter &<<CHAPenvironment>>&.
 
 
 .option local_part_prefix routers&!? "string list" unset
 
 
 .option local_part_prefix routers&!? "string list" unset

+.cindex affix "router precondition"

 .cindex "router" "prefix for local part"
 .cindex "prefix" "for local part, used in router"
 If this option is set, the router is skipped unless the local part starts with
 .cindex "router" "prefix for local part"
 .cindex "prefix" "for local part, used in router"
 If this option is set, the router is skipped unless the local part starts with


@@ -24707,6 +24774,16 @@ The &%tls_verify_certificates%& option must also be set.
 If both this option and &%tls_try_verify_hosts%& are unset
 operation is as if this option selected all hosts.
 
 If both this option and &%tls_try_verify_hosts%& are unset
 operation is as if this option selected all hosts.
 

+.new
+.option utf8_downconvert smtp integer!! unset
+.cindex utf8 "address downconversion"
+.cindex i18n "utf8 address downconversion"
+If built with internationalization support,
+this option controls conversion of UTF-8 in message addresses
+to a-label form.
+For details see section &<<SECTi18nMTA>>&.
+.wen
+

 
 
 
 
 
 


@@ -26669,8 +26746,8 @@ fixed_cram:
 .scindex IIDcyrauth2 "authenticators" "&(cyrus_sasl)&"
 .cindex "Cyrus" "SASL library"
 .cindex "Kerberos"
 .scindex IIDcyrauth2 "authenticators" "&(cyrus_sasl)&"
 .cindex "Cyrus" "SASL library"
 .cindex "Kerberos"

-The code for this authenticator was provided by Matthew Byng-Maddick of A L
-Digital Ltd (&url(http://www.aldigital.co.uk)).
+The code for this authenticator was provided by Matthew Byng-Maddick while
+at A L Digital Ltd.

 
 The &(cyrus_sasl)& authenticator provides server support for the Cyrus SASL
 library implementation of the RFC 2222 (&"Simple Authentication and Security
 
 The &(cyrus_sasl)& authenticator provides server support for the Cyrus SASL
 library implementation of the RFC 2222 (&"Simple Authentication and Security


@@ -27034,7 +27111,7 @@ The &(spa)& authenticator provides client support for Microsoft's &'Secure
 Password Authentication'& mechanism,
 which is also sometimes known as NTLM (NT LanMan). The code for client side of
 this authenticator was contributed by Marc Prud'hommeaux, and much of it is
 Password Authentication'& mechanism,
 which is also sometimes known as NTLM (NT LanMan). The code for client side of
 this authenticator was contributed by Marc Prud'hommeaux, and much of it is

-taken from the Samba project (&url(http://www.samba.org)). The code for the
+taken from the Samba project (&url(https://www.samba.org/)). The code for the

 server side was subsequently contributed by Tom Kistner. The mechanism works as
 follows:
 
 server side was subsequently contributed by Tom Kistner. The mechanism works as
 follows:
 


@@ -27540,11 +27617,11 @@ aware of future feature enhancements of GnuTLS.
 
 Documentation of the strings accepted may be found in the GnuTLS manual, under
 "Priority strings".  This is online as
 
 Documentation of the strings accepted may be found in the GnuTLS manual, under
 "Priority strings".  This is online as

-&url(http://www.gnutls.org/manual/html_node/Priority-Strings.html),
+&url(https://www.gnutls.org/manual/html_node/Priority-Strings.html),

 but beware that this relates to GnuTLS 3, which may be newer than the version
 installed on your system.  If you are using GnuTLS 3,
 then the example code
 but beware that this relates to GnuTLS 3, which may be newer than the version
 installed on your system.  If you are using GnuTLS 3,
 then the example code

-&url(http://www.gnutls.org/manual/gnutls.html#Listing-the-ciphersuites-in-a-priority-string)
+&url(https://www.gnutls.org/manual/gnutls.html#Listing-the-ciphersuites-in-a-priority-string)

 on that site can be used to test a given string.
 
 For example:
 on that site can be used to test a given string.
 
 For example:


@@ -28040,22 +28117,29 @@ connections to new processes if TLS has been used.
 .section "Certificates and all that" "SECTcerandall"
 .cindex "certificate" "references to discussion"
 In order to understand fully how TLS works, you need to know about
 .section "Certificates and all that" "SECTcerandall"
 .cindex "certificate" "references to discussion"
 In order to understand fully how TLS works, you need to know about

-certificates, certificate signing, and certificate authorities. This is not the
-place to give a tutorial, especially as I do not know very much about it
-myself. Some helpful introduction can be found in the FAQ for the SSL addition
-to Apache, currently at
+certificates, certificate signing, and certificate authorities.
+This is a large topic and an introductory guide is unsuitable for the Exim
+reference manual, so instead we provide pointers to existing documentation.
+
+The Apache web-server was for a long time the canonical guide, so their
+documentation is a good place to start; their SSL module's Introduction
+document is currently at

 .display
 .display

-&url(http://www.modssl.org/docs/2.7/ssl_faq.html#ToC24)
+&url(https://httpd.apache.org/docs/current/ssl/ssl_intro.html)

 .endd
 .endd

-Other parts of the &'modssl'& documentation are also helpful, and have
-links to further files.
-Eric Rescorla's book, &'SSL and TLS'&, published by Addison-Wesley (ISBN
-0-201-61598-3), contains both introductory and more in-depth descriptions.
-Some sample programs taken from the book are available from
+and their FAQ is at

 .display
 .display

-&url(http://www.rtfm.com/openssl-examples/)
+&url(https://httpd.apache.org/docs/current/ssl/ssl_faq.html)

 .endd
 
 .endd
 

+Eric Rescorla's book, &'SSL and TLS'&, published by Addison-Wesley (ISBN
+0-201-61598-3) in 2001, contains both introductory and more in-depth
+descriptions.
+More recently Ivan Ristić's book &'Bulletproof SSL and TLS'&,
+published by Feisty Duck (ISBN 978-1907117046) in 2013 is good.
+Ivan is the author of the popular TLS testing tools at
+&url(https://www.ssllabs.com/).
+

 
 .section "Certificate chains" "SECID186"
 The file named by &%tls_certificate%& may contain more than one
 
 .section "Certificate chains" "SECID186"
 The file named by &%tls_certificate%& may contain more than one


@@ -28126,7 +28210,7 @@ signed with that self-signed certificate.
 For information on creating self-signed CA certificates and using them to sign
 user certificates, see the &'General implementation overview'& chapter of the
 Open-source PKI book, available online at
 For information on creating self-signed CA certificates and using them to sign
 user certificates, see the &'General implementation overview'& chapter of the
 Open-source PKI book, available online at

-&url(http://ospkibook.sourceforge.net/).
+&url(https://sourceforge.net/projects/ospkibook/).

 .ecindex IIDencsmtp1
 .ecindex IIDencsmtp2
 
 .ecindex IIDencsmtp1
 .ecindex IIDencsmtp2
 


@@ -30482,6 +30566,10 @@ connection (assuming long-enough TTL).
 Exim does not share information between multiple incoming
 connections (but your local name server cache should be active).
 
 Exim does not share information between multiple incoming
 connections (but your local name server cache should be active).
 

+There are a number of DNS lists to choose from, some commercial, some free,
+or free for small deployments.  An overview can be found at
+&url(https://en.wikipedia.org/wiki/Comparison_of_DNS_blacklists).
+

 
 
 .section "Specifying the IP address for a DNS list lookup" "SECID201"
 
 
 .section "Specifying the IP address for a DNS list lookup" "SECID201"


@@ -30503,8 +30591,7 @@ MX hosts or nameservers of an email sender address. For an example, see section
 .section "DNS lists keyed on domain names" "SECID202"
 .cindex "DNS list" "keyed by domain name"
 There are some lists that are keyed on domain names rather than inverted IP
 .section "DNS lists keyed on domain names" "SECID202"
 .cindex "DNS list" "keyed by domain name"
 There are some lists that are keyed on domain names rather than inverted IP

-addresses (see for example the &'domain based zones'& link at
-&url(http://www.rfc-ignorant.org/)). No reversing of components is used
+addresses.  No reversing of components is used

 with these lists. You can change the name that is looked up in a DNS list by
 listing it after the domain name, introduced by a slash. For example,
 .code
 with these lists. You can change the name that is looked up in a DNS list by
 listing it after the domain name, introduced by a slash. For example,
 .code


@@ -32020,7 +32107,7 @@ written.  The usual &`defer_ok`& option is available.
 .vitem &%aveserver%&
 .cindex "virus scanners" "Kaspersky"
 This is the scanner daemon of Kaspersky Version 5. You can get a trial version
 .vitem &%aveserver%&
 .cindex "virus scanners" "Kaspersky"
 This is the scanner daemon of Kaspersky Version 5. You can get a trial version

-at &url(http://www.kaspersky.com). This scanner type takes one option,
+at &url(https://www.kaspersky.com/). This scanner type takes one option,

 which is the path to the daemon's UNIX socket. The default is shown in this
 example:
 .code
 which is the path to the daemon's UNIX socket. The default is shown in this
 example:
 .code


@@ -32031,7 +32118,7 @@ av_scanner = aveserver:/var/run/aveserver
 .vitem &%clamd%&
 .cindex "virus scanners" "clamd"
 This daemon-type scanner is GPL and free. You can get it at
 .vitem &%clamd%&
 .cindex "virus scanners" "clamd"
 This daemon-type scanner is GPL and free. You can get it at

-&url(http://www.clamav.net/). Some older versions of clamd do not seem to
+&url(https://www.clamav.net/). Some older versions of clamd do not seem to

 unpack MIME containers, so it used to be recommended to unpack MIME attachments
 in the MIME ACL. This is no longer believed to be necessary.
 
 unpack MIME containers, so it used to be recommended to unpack MIME attachments
 in the MIME ACL. This is no longer believed to be necessary.
 


@@ -32125,7 +32212,7 @@ av_scanner = cmdline:\
 .endd
 .vitem &%drweb%&
 .cindex "virus scanners" "DrWeb"
 .endd
 .vitem &%drweb%&
 .cindex "virus scanners" "DrWeb"

-The DrWeb daemon scanner (&url(http://www.sald.com/)) interface
+The DrWeb daemon scanner (&url(https://www.sald.ru/)) interface

 takes one option,
 either a full path to a UNIX socket,
 or host and port specifiers separated by white space.
 takes one option,
 either a full path to a UNIX socket,
 or host and port specifiers separated by white space.


@@ -32162,7 +32249,7 @@ If you omit the argument, the default values show above are used.
 
 .vitem &%fsecure%&
 .cindex "virus scanners" "F-Secure"
 
 .vitem &%fsecure%&
 .cindex "virus scanners" "F-Secure"

-The F-Secure daemon scanner (&url(http://www.f-secure.com)) takes one
+The F-Secure daemon scanner (&url(https://www.f-secure.com/)) takes one

 argument which is the path to a UNIX socket. For example:
 .code
 av_scanner = fsecure:/path/to/.fsav
 argument which is the path to a UNIX socket. For example:
 .code
 av_scanner = fsecure:/path/to/.fsav


@@ -32183,9 +32270,13 @@ The default path is &_/var/run/AvpCtl_&.
 
 .vitem &%mksd%&
 .cindex "virus scanners" "mksd"
 
 .vitem &%mksd%&
 .cindex "virus scanners" "mksd"

-This is a daemon type scanner that is aimed mainly at Polish users, though some
-parts of documentation are now available in English. You can get it at
-&url(http://linux.mks.com.pl/). The only option for this scanner type is
+This was a daemon type scanner that is aimed mainly at Polish users,
+though some documentation was available in English.
+The history can be shown at &url(https://en.wikipedia.org/wiki/Mks_vir)
+and this appears to be a candidate for removal from Exim, unless
+we are informed of other virus scanners which use the same protocol
+to integrate.
+The only option for this scanner type is

 the maximum number of processes used simultaneously to scan the attachments,
 provided that mksd has
 been run with at least the same number of child processes. For example:
 the maximum number of processes used simultaneously to scan the attachments,
 provided that mksd has
 been run with at least the same number of child processes. For example:


@@ -32217,7 +32308,7 @@ specify an empty element to get this.
 .vitem &%sophie%&
 .cindex "virus scanners" "Sophos and Sophie"
 Sophie is a daemon that uses Sophos' &%libsavi%& library to scan for viruses.
 .vitem &%sophie%&
 .cindex "virus scanners" "Sophos and Sophie"
 Sophie is a daemon that uses Sophos' &%libsavi%& library to scan for viruses.

-You can get Sophie at &url(http://www.clanfield.info/sophie/). The only option
+You can get Sophie at &url(http://sophie.sourceforge.net/). The only option

 for this scanner type is the path to the UNIX socket that Sophie uses for
 client communication. For example:
 .code
 for this scanner type is the path to the UNIX socket that Sophie uses for
 client communication. For example:
 .code


@@ -32321,7 +32412,7 @@ Support is also provided for Rspamd.
 
 For more information about installation and configuration of SpamAssassin or
 Rspamd refer to their respective websites at
 
 For more information about installation and configuration of SpamAssassin or
 Rspamd refer to their respective websites at

-&url(http://spamassassin.apache.org) and &url(http://www.rspamd.com)
+&url(https://spamassassin.apache.org/) and &url(https://www.rspamd.com/)

 
 SpamAssassin can be installed with CPAN by running:
 .code
 
 SpamAssassin can be installed with CPAN by running:
 .code


@@ -35510,7 +35601,7 @@ the address, giving a suitable error message.
 .cindex "VERP"
 .cindex "Variable Envelope Return Paths"
 .cindex "envelope sender"
 .cindex "VERP"
 .cindex "Variable Envelope Return Paths"
 .cindex "envelope sender"

-Variable Envelope Return Paths &-- see &url(http://cr.yp.to/proto/verp.txt) &--
+Variable Envelope Return Paths &-- see &url(https://cr.yp.to/proto/verp.txt) &--

 are a way of helping mailing list administrators discover which subscription
 address is the cause of a particular delivery failure. The idea is to encode
 the original recipient address in the outgoing envelope sender address, so that
 are a way of helping mailing list administrators discover which subscription
 address is the cause of a particular delivery failure. The idea is to encode
 the original recipient address in the outgoing envelope sender address, so that


@@ -36500,8 +36591,9 @@ the following table:
 &`F   `&        sender address (on delivery lines)
 &`H   `&        host name and IP address
 &`I   `&        local interface used
 &`F   `&        sender address (on delivery lines)
 &`H   `&        host name and IP address
 &`I   `&        local interface used

-&`K   `&        CHUNKING extension used

 &`id  `&        message id for incoming message
 &`id  `&        message id for incoming message

+&`K   `&        CHUNKING extension used
+&`L   `&        on &`<=`& and &`=>`& lines: PIPELINING extension used

 &`M8S `&        8BITMIME status for incoming message
 &`P   `&        on &`<=`& lines: protocol used
 &`    `&        on &`=>`& and &`**`& lines: return path
 &`M8S `&        8BITMIME status for incoming message
 &`P   `&        on &`<=`& lines: protocol used
 &`    `&        on &`=>`& and &`**`& lines: return path


@@ -36612,6 +36704,7 @@ selection marked by asterisks:
 &` queue_time                 `&  time on queue for one recipient
 &` queue_time_overall         `&  time on queue for whole message
 &` pid                        `&  Exim process id
 &` queue_time                 `&  time on queue for one recipient
 &` queue_time_overall         `&  time on queue for whole message
 &` pid                        `&  Exim process id

+&` pipelining                 `&  PIPELINING use, on <= and => lines

 &` proxy                      `&  proxy address on <= and => lines
 &` receive_time               `&  time taken to receive message
 &` received_recipients        `&  recipients on <= lines
 &` proxy                      `&  proxy address on <= and => lines
 &` receive_time               `&  time taken to receive message
 &` received_recipients        `&  recipients on <= lines


@@ -36814,6 +36907,15 @@ local port is a random ephemeral port.
 &%pid%&: The current process id is added to every log line, in square brackets,
 immediately after the time and date.
 .next
 &%pid%&: The current process id is added to every log line, in square brackets,
 immediately after the time and date.
 .next

+.new
+.cindex log pipelining
+.cindex pipelining "logging outgoing"
+&%pipelining%&: A field is added to delivery and accept
+log lines when the ESMTP PIPELINING extension was used.
+The field is a single "L".
+On accept lines, where PIPELINING was offered but not used by the client,
+the field has a minus appended.
+.next

 .cindex "log" "queue run"
 .cindex "queue runner" "logging"
 &%queue_run%&: The start and end of every queue run are logged.
 .cindex "log" "queue run"
 .cindex "queue runner" "logging"
 &%queue_run%&: The start and end of every queue run are logged.


@@ -37077,7 +37179,7 @@ the next chapter. The utilities described here are:
 
 Another utility that might be of use to sites with many MTAs is Tom Kistner's
 &'exilog'&. It provides log visualizations across multiple Exim servers. See
 
 Another utility that might be of use to sites with many MTAs is Tom Kistner's
 &'exilog'&. It provides log visualizations across multiple Exim servers. See

-&url(http://duncanthrax.net/exilog/) for details.
+&url(https://duncanthrax.net/exilog/) for details.

 
 
 
 
 
 


@@ -37345,8 +37447,8 @@ assuming you have used the name &"exim"& for the Exim user. You can run
 .cindex "&'eximstats'&"
 A Perl script called &'eximstats'& is provided for extracting statistical
 information from log files. The output is either plain text, or HTML.
 .cindex "&'eximstats'&"
 A Perl script called &'eximstats'& is provided for extracting statistical
 information from log files. The output is either plain text, or HTML.

-Exim log files are also supported by the &'Lire'& system produced by the
-LogReport Foundation &url(http://www.logreport.org).
+. --- 2018-09-07: LogReport's Lire appears to be dead; website is a Yahoo Japan
+. --- 404 error and everything else points to that.

 
 The &'eximstats'& script has been hacked about quite a bit over time. The
 latest version is the result of some extensive revision by Steve Campbell. A
 
 The &'eximstats'& script has been hacked about quite a bit over time. The
 latest version is the result of some extensive revision by Steve Campbell. A


@@ -38633,6 +38735,12 @@ two files contains the final component of its own name as its first line. This
 is insurance against disk crashes where the directory is lost but the files
 themselves are recoverable.
 
 is insurance against disk crashes where the directory is lost but the files
 themselves are recoverable.
 

+.new
+The file formats may be changed, or new formats added, at any release.
+Spool files are not intended as an interface to other programs
+and should not be used as such.
+.wen
+

 Some people are tempted into editing -D files in order to modify messages. You
 need to be extremely careful if you do this; it is not recommended and you are
 on your own if you do it. Here are some of the pitfalls:
 Some people are tempted into editing -D files in order to modify messages. You
 need to be extremely careful if you do this; it is not recommended and you are
 on your own if you do it. Here are some of the pitfalls:


@@ -39460,13 +39568,14 @@ for more information of what they mean.
 SPF is a mechanism whereby a domain may assert which IP addresses may transmit
 messages with its domain in the envelope from, documented by RFC 7208.
 For more information on SPF see &url(http://www.openspf.org).
 SPF is a mechanism whereby a domain may assert which IP addresses may transmit
 messages with its domain in the envelope from, documented by RFC 7208.
 For more information on SPF see &url(http://www.openspf.org).

+. --- 2018-09-07: still not https

 
 Messages sent by a system not authorised will fail checking of such assertions.
 This includes retransmissions done by traditional forwarders.
 
 SPF verification support is built into Exim if SUPPORT_SPF=yes is set in
 &_Local/Makefile_&.  The support uses the &_libspf2_& library
 
 Messages sent by a system not authorised will fail checking of such assertions.
 This includes retransmissions done by traditional forwarders.
 
 SPF verification support is built into Exim if SUPPORT_SPF=yes is set in
 &_Local/Makefile_&.  The support uses the &_libspf2_& library

-&url(http://www.libspf2.org/).
+&url(https://www.libspf2.org/).

 There is no Exim involvement in the transmission of messages;
 publishing certain DNS records is all that is required.
 
 There is no Exim involvement in the transmission of messages;
 publishing certain DNS records is all that is required.
 


@@ -39577,6 +39686,7 @@ SPF, but it is supported by the same framework that enables SPF
 capability.
 Refer to &url(http://www.openspf.org/FAQ/Best_guess_record)
 for a description of what it means.
 capability.
 Refer to &url(http://www.openspf.org/FAQ/Best_guess_record)
 for a description of what it means.

+. --- 2018-09-07: still not https:

 
 To access this feature, simply use the spf_guess condition in place
 of the spf one.  For example:
 
 To access this feature, simply use the spf_guess condition in place
 of the spf one.  For example:


@@ -39645,10 +39755,8 @@ that uses &"Proxy Protocol"& to speak to it.
 To include this support, include &"SUPPORT_PROXY=yes"&
 in Local/Makefile.
 
 To include this support, include &"SUPPORT_PROXY=yes"&
 in Local/Makefile.
 

-It was built on specifications from:
-(&url(http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt)).
-That URL was revised in May 2014 to version 2 spec:
-(&url(http://git.1wt.eu/web?p=haproxy.git;a=commitdiff;h=afb768340c9d7e50d8e)).
+It was built on the HAProxy specification, found at
+&url(https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt).

 
 The purpose of this facility is so that an application load balancer,
 such as HAProxy, can sit in front of several Exim servers
 
 The purpose of this facility is so that an application load balancer,
 such as HAProxy, can sit in front of several Exim servers


@@ -39854,6 +39962,12 @@ If a value is appended it may be:
 If mua_wrapper is set, the utf8_downconvert control
 is initially set to -1.
 
 If mua_wrapper is set, the utf8_downconvert control
 is initially set to -1.
 

+.new
+The smtp transport has an option &%utf8_downconvert%&.
+If set it must expand to one of the three values described above,
+and it overrides any previously set value.
+.wen
+

 
 There is no explicit support for VRFY and EXPN.
 Configurations supporting these should inspect
 
 There is no explicit support for VRFY and EXPN.
 Configurations supporting these should inspect


@@ -39975,6 +40089,8 @@ with the event type:
 .display
 &`dane:fail            `& failure reason
 &`msg:delivery         `& smtp confirmation message
 .display
 &`dane:fail            `& failure reason
 &`msg:delivery         `& smtp confirmation message

+&`msg:fail:internal    `& failure reason
+&`msg:fail:delivery    `& smtp error message

 &`msg:rcpt:host:defer  `& error string
 &`msg:rcpt:defer       `& error string
 &`msg:host:defer       `& error string
 &`msg:rcpt:host:defer  `& error string
 &`msg:rcpt:defer       `& error string
 &`msg:host:defer       `& error string