* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2018 */
+/* Copyright (c) University of Cambridge 1995 - 2019 */
+/* Copyright (c) The Exim Maintainers 2020 - 2021 */
/* See the file NOTICE for conditions of use and distribution. */
/* Portions Copyright (c) The OpenSSL Project 1999 */
#endif
#if OPENSSL_VERSION_NUMBER >= 0x10100000L
# define EXIM_HAVE_OCSP_RESP_COUNT
+# define OPENSSL_AUTO_SHA256
#else
# define EXIM_HAVE_EPHEM_RSA_KEX
# define EXIM_HAVE_RAND_PSEUDO
#endif
#if (OPENSSL_VERSION_NUMBER >= 0x0090800fL) && !defined(OPENSSL_NO_SHA256)
-# define EXIM_HAVE_SHA256 /*MMMM*/
+# define EXIM_HAVE_SHA256
#endif
-/*
- * X509_check_host provides sane certificate hostname checking, but was added
- * to OpenSSL late, after other projects forked off the code-base. So in
- * addition to guarding against the base version number, beware that LibreSSL
- * does not (at this time) support this function.
- *
- * If LibreSSL gains a different API, perhaps via libtls, then we'll probably
- * opt to disentangle and ask a LibreSSL user to provide glue for a third
- * crypto provider for libtls instead of continuing to tie the OpenSSL glue
- * into even twistier knots. If LibreSSL gains the same API, we can just
- * change this guard and punt the issue for a while longer.
- */
+/* X509_check_host provides sane certificate hostname checking, but was added
+to OpenSSL late, after other projects forked off the code-base. So in
+addition to guarding against the base version number, beware that LibreSSL
+does not (at this time) support this function.
+
+If LibreSSL gains a different API, perhaps via libtls, then we'll probably
+opt to disentangle and ask a LibreSSL user to provide glue for a third
+crypto provider for libtls instead of continuing to tie the OpenSSL glue
+into even twistier knots. If LibreSSL gains the same API, we can just
+change this guard and punt the issue for a while longer. */
+
#ifndef LIBRESSL_VERSION_NUMBER
# if OPENSSL_VERSION_NUMBER >= 0x010100000L
# define EXIM_HAVE_OPENSSL_CHECKHOST
# define EXIM_HAVE_OPENSSL_DH_BITS
+# define EXIM_HAVE_OPENSSL_TLS_METHOD
+# define EXIM_HAVE_OPENSSL_KEYLOG
+# define EXIM_HAVE_OPENSSL_CIPHER_GET_ID
+# define EXIM_HAVE_SESSION_TICKET
+# define EXIM_HAVE_OPESSL_TRACE
+# define EXIM_HAVE_OPESSL_GET0_SERIAL
+# ifndef DISABLE_OCSP
+# define EXIM_HAVE_OCSP
+# endif
+# define EXIM_HAVE_ALPN /* fail ret from hshake-cb is ignored by LibreSSL */
+# else
+# define EXIM_NEED_OPENSSL_INIT
# endif
# if OPENSSL_VERSION_NUMBER >= 0x010000000L \
&& (OPENSSL_VERSION_NUMBER & 0x0000ff000L) >= 0x000002000L
# endif
#endif
+#if LIBRESSL_VERSION_NUMBER >= 0x3040000fL
+# define EXIM_HAVE_OPENSSL_CIPHER_GET_ID
+#endif
+
#if !defined(LIBRESSL_VERSION_NUMBER) \
|| LIBRESSL_VERSION_NUMBER >= 0x20010000L
# if !defined(OPENSSL_NO_ECDH)
# if OPENSSL_VERSION_NUMBER >= 0x0090800fL
-# define EXIM_HAVE_ECDH /*MMMM*/
+# define EXIM_HAVE_ECDH
# endif
# if OPENSSL_VERSION_NUMBER >= 0x10002000L
# define EXIM_HAVE_OPENSSL_EC_NIST2NID
# endif
#endif
+#ifndef LIBRESSL_VERSION_NUMBER
+# if OPENSSL_VERSION_NUMBER >= 0x010101000L
+# define OPENSSL_HAVE_KEYLOG_CB
+# define OPENSSL_HAVE_NUM_TICKETS
+# define EXIM_HAVE_OPENSSL_CIPHER_STD_NAME
+# else
+# define OPENSSL_BAD_SRVR_OURCERT
+# endif
+#endif
+
#if !defined(EXIM_HAVE_OPENSSL_TLSEXT) && !defined(DISABLE_OCSP)
# warning "OpenSSL library version too old; define DISABLE_OCSP in Makefile"
# define DISABLE_OCSP
#endif
+#ifndef DISABLE_TLS_RESUME
+# if OPENSSL_VERSION_NUMBER < 0x0101010L
+# error OpenSSL version too old for session-resumption
+# endif
+#endif
+
#ifdef EXIM_HAVE_OPENSSL_CHECKHOST
# include <openssl/x509v3.h>
#endif
+#ifndef EXIM_HAVE_OPENSSL_CIPHER_STD_NAME
+# ifndef EXIM_HAVE_OPENSSL_CIPHER_GET_ID
+# define SSL_CIPHER_get_id(c) (c->id)
+# endif
+# ifndef MACRO_PREDEF
+# include "tls-cipher-stdname.c"
+# endif
+#endif
+
+/*************************************************
+* OpenSSL option parse *
+*************************************************/
+
+typedef struct exim_openssl_option {
+ uschar *name;
+ long value;
+} exim_openssl_option;
+/* We could use a macro to expand, but we need the ifdef and not all the
+options document which version they were introduced in. Policylet: include
+all options unless explicitly for DTLS, let the administrator choose which
+to apply.
+
+This list is current as of:
+ ==> 1.1.1c <==
+
+XXX could we autobuild this list, as with predefined-macros?
+Seems just parsing ssl.h for SSL_OP_.* would be enough (except to exclude DTLS).
+Also allow a numeric literal?
+*/
+static exim_openssl_option exim_openssl_options[] = {
+/* KEEP SORTED ALPHABETICALLY! */
+#ifdef SSL_OP_ALL
+ { US"all", (long) SSL_OP_ALL },
+#endif
+#ifdef SSL_OP_ALLOW_NO_DHE_KEX
+ { US"allow_no_dhe_kex", SSL_OP_ALLOW_NO_DHE_KEX },
+#endif
+#ifdef SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
+ { US"allow_unsafe_legacy_renegotiation", SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION },
+#endif
+#ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
+ { US"cipher_server_preference", SSL_OP_CIPHER_SERVER_PREFERENCE },
+#endif
+#ifdef SSL_OP_CRYPTOPRO_TLSEXT_BUG
+ { US"cryptopro_tlsext_bug", SSL_OP_CRYPTOPRO_TLSEXT_BUG },
+#endif
+#ifdef SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
+ { US"dont_insert_empty_fragments", SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS },
+#endif
+#ifdef SSL_OP_ENABLE_MIDDLEBOX_COMPAT
+ { US"enable_middlebox_compat", SSL_OP_ENABLE_MIDDLEBOX_COMPAT },
+#endif
+#ifdef SSL_OP_EPHEMERAL_RSA
+ { US"ephemeral_rsa", SSL_OP_EPHEMERAL_RSA },
+#endif
+#ifdef SSL_OP_LEGACY_SERVER_CONNECT
+ { US"legacy_server_connect", SSL_OP_LEGACY_SERVER_CONNECT },
+#endif
+#ifdef SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER
+ { US"microsoft_big_sslv3_buffer", SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER },
+#endif
+#ifdef SSL_OP_MICROSOFT_SESS_ID_BUG
+ { US"microsoft_sess_id_bug", SSL_OP_MICROSOFT_SESS_ID_BUG },
+#endif
+#ifdef SSL_OP_MSIE_SSLV2_RSA_PADDING
+ { US"msie_sslv2_rsa_padding", SSL_OP_MSIE_SSLV2_RSA_PADDING },
+#endif
+#ifdef SSL_OP_NETSCAPE_CHALLENGE_BUG
+ { US"netscape_challenge_bug", SSL_OP_NETSCAPE_CHALLENGE_BUG },
+#endif
+#ifdef SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG
+ { US"netscape_reuse_cipher_change_bug", SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG },
+#endif
+#ifdef SSL_OP_NO_ANTI_REPLAY
+ { US"no_anti_replay", SSL_OP_NO_ANTI_REPLAY },
+#endif
+#ifdef SSL_OP_NO_COMPRESSION
+ { US"no_compression", SSL_OP_NO_COMPRESSION },
+#endif
+#ifdef SSL_OP_NO_ENCRYPT_THEN_MAC
+ { US"no_encrypt_then_mac", SSL_OP_NO_ENCRYPT_THEN_MAC },
+#endif
+#ifdef SSL_OP_NO_RENEGOTIATION
+ { US"no_renegotiation", SSL_OP_NO_RENEGOTIATION },
+#endif
+#ifdef SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
+ { US"no_session_resumption_on_renegotiation", SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION },
+#endif
+#ifdef SSL_OP_NO_SSLv2
+ { US"no_sslv2", SSL_OP_NO_SSLv2 },
+#endif
+#ifdef SSL_OP_NO_SSLv3
+ { US"no_sslv3", SSL_OP_NO_SSLv3 },
+#endif
+#ifdef SSL_OP_NO_TICKET
+ { US"no_ticket", SSL_OP_NO_TICKET },
+#endif
+#ifdef SSL_OP_NO_TLSv1
+ { US"no_tlsv1", SSL_OP_NO_TLSv1 },
+#endif
+#ifdef SSL_OP_NO_TLSv1_1
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+# if SSL_OP_NO_TLSv1_1 == 0x00000400L
+ /* Error in chosen value in 1.0.1a; see first item in CHANGES for 1.0.1b */
+# warning OpenSSL 1.0.1a uses a bad value for SSL_OP_NO_TLSv1_1, ignoring
+# define NO_SSL_OP_NO_TLSv1_1
+# endif
+# endif
+# ifndef NO_SSL_OP_NO_TLSv1_1
+ { US"no_tlsv1_1", SSL_OP_NO_TLSv1_1 },
+# endif
+#endif
+#ifdef SSL_OP_NO_TLSv1_2
+ { US"no_tlsv1_2", SSL_OP_NO_TLSv1_2 },
+#endif
+#ifdef SSL_OP_NO_TLSv1_3
+ { US"no_tlsv1_3", SSL_OP_NO_TLSv1_3 },
+#endif
+#ifdef SSL_OP_PRIORITIZE_CHACHA
+ { US"prioritize_chacha", SSL_OP_PRIORITIZE_CHACHA },
+#endif
+#ifdef SSL_OP_SAFARI_ECDHE_ECDSA_BUG
+ { US"safari_ecdhe_ecdsa_bug", SSL_OP_SAFARI_ECDHE_ECDSA_BUG },
+#endif
+#ifdef SSL_OP_SINGLE_DH_USE
+ { US"single_dh_use", SSL_OP_SINGLE_DH_USE },
+#endif
+#ifdef SSL_OP_SINGLE_ECDH_USE
+ { US"single_ecdh_use", SSL_OP_SINGLE_ECDH_USE },
+#endif
+#ifdef SSL_OP_SSLEAY_080_CLIENT_DH_BUG
+ { US"ssleay_080_client_dh_bug", SSL_OP_SSLEAY_080_CLIENT_DH_BUG },
+#endif
+#ifdef SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG
+ { US"sslref2_reuse_cert_type_bug", SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG },
+#endif
+#ifdef SSL_OP_TLS_BLOCK_PADDING_BUG
+ { US"tls_block_padding_bug", SSL_OP_TLS_BLOCK_PADDING_BUG },
+#endif
+#ifdef SSL_OP_TLS_D5_BUG
+ { US"tls_d5_bug", SSL_OP_TLS_D5_BUG },
+#endif
+#ifdef SSL_OP_TLS_ROLLBACK_BUG
+ { US"tls_rollback_bug", SSL_OP_TLS_ROLLBACK_BUG },
+#endif
+#ifdef SSL_OP_TLSEXT_PADDING
+ { US"tlsext_padding", SSL_OP_TLSEXT_PADDING },
+#endif
+};
+
+#ifndef MACRO_PREDEF
+static int exim_openssl_options_size = nelem(exim_openssl_options);
+static long init_options = 0;
+#endif
+
+#ifdef MACRO_PREDEF
+void
+options_tls(void)
+{
+uschar buf[64];
+
+for (struct exim_openssl_option * o = exim_openssl_options;
+ o < exim_openssl_options + nelem(exim_openssl_options); o++)
+ {
+ /* Trailing X is workaround for problem with _OPT_OPENSSL_NO_TLSV1
+ being a ".ifdef _OPT_OPENSSL_NO_TLSV1_3" match */
+
+ spf(buf, sizeof(buf), US"_OPT_OPENSSL_%T_X", o->name);
+ builtin_macro_create(buf);
+ }
+
+# ifndef DISABLE_TLS_RESUME
+builtin_macro_create_var(US"_RESUME_DECODE", RESUME_DECODE_STRING );
+# endif
+# ifdef SSL_OP_NO_TLSv1_3
+builtin_macro_create(US"_HAVE_TLS1_3");
+# endif
+# ifdef OPENSSL_BAD_SRVR_OURCERT
+builtin_macro_create(US"_TLS_BAD_MULTICERT_IN_OURCERT");
+# endif
+# ifdef EXIM_HAVE_OCSP
+builtin_macro_create(US"_HAVE_TLS_OCSP");
+builtin_macro_create(US"_HAVE_TLS_OCSP_LIST");
+# endif
+# ifdef EXIM_HAVE_ALPN
+builtin_macro_create(US"_HAVE_TLS_ALPN");
+# endif
+}
+#else
+
+/******************************************************************************/
+
/* Structure for collecting random data for seeding. */
typedef struct randstuff {
Simple case: client, `client_ctx`
As a client, we can be doing a callout or cut-through delivery while receiving
a message. So we have a client context, which should have options initialised
- from the SMTP Transport.
+ from the SMTP Transport. We may also concurrently want to make TLS connections
+ to utility daemons, so client-contexts are allocated and passed around in call
+ args rather than using a gobal.
Server:
There are two cases: with and without ServerNameIndication from the client.
configuration.
*/
-static SSL_CTX *client_ctx = NULL;
-static SSL_CTX *server_ctx = NULL;
-static SSL *client_ssl = NULL;
-static SSL *server_ssl = NULL;
+typedef struct {
+ SSL_CTX * ctx;
+ SSL * ssl;
+ gstring * corked;
+} exim_openssl_client_tls_ctx;
+
+
+/* static SSL_CTX *server_ctx = NULL; */
+/* static SSL *server_ssl = NULL; */
#ifdef EXIM_HAVE_OPENSSL_TLSEXT
static SSL_CTX *server_sni = NULL;
#endif
+#ifdef EXIM_HAVE_ALPN
+static BOOL server_seen_alpn = FALSE;
+#endif
static char ssl_errstring[256];
-static int ssl_session_timeout = 200;
+static int ssl_session_timeout = 7200; /* Two hours */
static BOOL client_verify_optional = FALSE;
static BOOL server_verify_optional = FALSE;
static BOOL reexpand_tls_files_for_sni = FALSE;
-typedef struct tls_ext_ctx_cb {
- uschar *certificate;
- uschar *privatekey;
- BOOL is_server;
+typedef struct ocsp_resp {
+ struct ocsp_resp * next;
+ OCSP_RESPONSE * resp;
+} ocsp_resplist;
+
+typedef struct exim_openssl_state {
+ exim_tlslib_state lib_state;
+#define lib_ctx libdata0
+#define lib_ssl libdata1
+
+ tls_support * tlsp;
+ uschar * certificate;
+ uschar * privatekey;
+ BOOL is_server;
#ifndef DISABLE_OCSP
STACK_OF(X509) *verify_stack; /* chain for verifying the proof */
union {
struct {
uschar *file;
- uschar *file_expanded;
- OCSP_RESPONSE *response;
+ const uschar *file_expanded;
+ ocsp_resplist *olist;
} server;
struct {
X509_STORE *verify_store; /* non-null if status requested */
} client;
} u_ocsp;
#endif
- uschar *dhparam;
+ uschar * dhparam;
/* these are cached from first expand */
- uschar *server_cipher_list;
+ uschar * server_cipher_list;
/* only passed down to tls_error: */
- host_item *host;
+ host_item * host;
const uschar * verify_cert_hostnames;
#ifndef DISABLE_EVENT
- uschar * event_action;
+ uschar * event_action;
#endif
-} tls_ext_ctx_cb;
+} exim_openssl_state_st;
/* should figure out a cleanup of API to handle state preserved per
implementation, for various reasons, which can be void * in the APIs.
For now, we hack around it. */
-tls_ext_ctx_cb *client_static_cbinfo = NULL;
-tls_ext_ctx_cb *server_static_cbinfo = NULL;
+exim_openssl_state_st *client_static_state = NULL; /*XXX should not use static; multiple concurrent clients! */
+exim_openssl_state_st state_server = {.is_server = TRUE};
static int
-setup_certs(SSL_CTX *sctx, uschar *certs, uschar *crl, host_item *host, BOOL optional,
- int (*cert_vfy_cb)(int, X509_STORE_CTX *), uschar ** errstr );
+setup_certs(SSL_CTX *sctx, uschar *certs, uschar *crl, host_item *host,
+ uschar ** errstr );
/* Callbacks */
-#ifdef EXIM_HAVE_OPENSSL_TLSEXT
-static int tls_servername_cb(SSL *s, int *ad ARG_UNUSED, void *arg);
-#endif
#ifndef DISABLE_OCSP
static int tls_server_stapling_cb(SSL *s, void *arg);
#endif
+
+/* Daemon-called, before every connection, key create/rotate */
+#ifndef DISABLE_TLS_RESUME
+static void tk_init(void);
+static int tls_exdata_idx = -1;
+#endif
+
+static void
+tls_per_lib_daemon_tick(void)
+{
+#ifndef DISABLE_TLS_RESUME
+tk_init();
+#endif
+}
+
+/* Called once at daemon startup */
+
+static void
+tls_per_lib_daemon_init(void)
+{
+tls_daemon_creds_reload();
+}
+
+
/*************************************************
* Handle TLS error *
*************************************************/
{
if (!msg)
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
msg = US ssl_errstring;
}
-if (errstr) *errstr = string_sprintf("(%s): %s", prefix, msg);
+msg = string_sprintf("(%s): %s", prefix, msg);
+DEBUG(D_tls) debug_printf("TLS error '%s'\n", msg);
+if (errstr) *errstr = msg;
return host ? FAIL : DEFER;
}
-/*************************************************
-* Callback to generate RSA key *
-*************************************************/
+/**************************************************
+* General library initalisation *
+**************************************************/
-/*
-Arguments:
- s SSL connection (not used)
- export not used
- keylength keylength
+static BOOL
+lib_rand_init(void * addr)
+{
+randstuff r;
+if (!RAND_status()) return TRUE;
-Returns: pointer to generated key
-*/
+gettimeofday(&r.tv, NULL);
+r.p = getpid();
+RAND_seed(US (&r), sizeof(r));
+RAND_seed(US big_buffer, big_buffer_size);
+if (addr) RAND_seed(US addr, sizeof(addr));
-static RSA *
-rsa_callback(SSL *s, int export, int keylength)
+return RAND_status();
+}
+
+
+static void
+tls_openssl_init(void)
{
-RSA *rsa_key;
-#ifdef EXIM_HAVE_RSA_GENKEY_EX
-BIGNUM *bn = BN_new();
-#endif
+static BOOL once = FALSE;
+if (once) return;
+once = TRUE;
-export = export; /* Shut picky compilers up */
-DEBUG(D_tls) debug_printf("Generating %d bit RSA key...\n", keylength);
+#ifdef EXIM_NEED_OPENSSL_INIT
+SSL_load_error_strings(); /* basic set up */
+OpenSSL_add_ssl_algorithms();
+#endif
-#ifdef EXIM_HAVE_RSA_GENKEY_EX
-if ( !BN_set_word(bn, (unsigned long)RSA_F4)
- || !(rsa_key = RSA_new())
- || !RSA_generate_key_ex(rsa_key, keylength, bn, NULL)
- )
-#else
-if (!(rsa_key = RSA_generate_key(keylength, RSA_F4, NULL, NULL)))
+#if defined(EXIM_HAVE_SHA256) && !defined(OPENSSL_AUTO_SHA256)
+/* SHA256 is becoming ever more popular. This makes sure it gets added to the
+list of available digests. */
+EVP_add_digest(EVP_sha256());
#endif
- {
- ERR_error_string(ERR_get_error(), ssl_errstring);
- log_write(0, LOG_MAIN|LOG_PANIC, "TLS error (RSA_generate_key): %s",
- ssl_errstring);
- return NULL;
- }
-return rsa_key;
+(void) lib_rand_init(NULL);
+(void) tls_openssl_options_parse(openssl_options, &init_options);
}
-/* Extreme debug
-#ifndef DISABLE_OCSP
-void
-x509_store_dump_cert_s_names(X509_STORE * store)
+/*************************************************
+* Initialize for DH *
+*************************************************/
+
+/* If dhparam is set, expand it, and load up the parameters for DH encryption.
+Server only.
+
+Arguments:
+ sctx The current SSL CTX (inbound or outbound)
+ dhparam DH parameter file or fixed parameter identity string
+ errstr error string pointer
+
+Returns: TRUE if OK (nothing to set up, or setup worked)
+*/
+
+static BOOL
+init_dh(SSL_CTX * sctx, uschar * dhparam, uschar ** errstr)
{
-STACK_OF(X509_OBJECT) * roots= store->objs;
-int i;
-static uschar name[256];
+BIO * bio;
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+DH * dh;
+#else
+EVP_PKEY * pkey;
+#endif
+uschar * dhexpanded;
+const char * pem;
+int dh_bitsize;
+
+if (!expand_check(dhparam, US"tls_dhparam", &dhexpanded, errstr))
+ return FALSE;
-for(i= 0; i<sk_X509_OBJECT_num(roots); i++)
+if (!dhexpanded || !*dhexpanded)
+ bio = BIO_new_mem_buf(CS std_dh_prime_default(), -1);
+else if (dhexpanded[0] == '/')
{
- X509_OBJECT * tmp_obj= sk_X509_OBJECT_value(roots, i);
- if(tmp_obj->type == X509_LU_X509)
+ if (!(bio = BIO_new_file(CS dhexpanded, "r")))
{
- X509 * current_cert= tmp_obj->data.x509;
- X509_NAME_oneline(X509_get_subject_name(current_cert), CS name, sizeof(name));
- name[sizeof(name)-1] = '\0';
- debug_printf(" %s\n", name);
+ tls_error(string_sprintf("could not read dhparams file %s", dhexpanded),
+ NULL, US strerror(errno), errstr);
+ return FALSE;
}
}
-}
-#endif
-*/
-
-
-#ifndef DISABLE_EVENT
-static int
+else
+ {
+ if (Ustrcmp(dhexpanded, "none") == 0)
+ {
+ DEBUG(D_tls) debug_printf("Requested no DH parameters.\n");
+ return TRUE;
+ }
+
+ if (!(pem = std_dh_prime_named(dhexpanded)))
+ {
+ tls_error(string_sprintf("Unknown standard DH prime \"%s\"", dhexpanded),
+ NULL, US strerror(errno), errstr);
+ return FALSE;
+ }
+ bio = BIO_new_mem_buf(CS pem, -1);
+ }
+
+if (!(
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+ dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL)
+#else
+ pkey = PEM_read_bio_Parameters_ex(bio, NULL, NULL, NULL)
+#endif
+ ) )
+ {
+ BIO_free(bio);
+ tls_error(string_sprintf("Could not read tls_dhparams \"%s\"", dhexpanded),
+ NULL, NULL, errstr);
+ return FALSE;
+ }
+
+/* note: our default limit of 2236 is not a multiple of 8; the limit comes from
+an NSS limit, and the GnuTLS APIs handle bit-sizes fine, so we went with 2236.
+But older OpenSSL can only report in bytes (octets), not bits. If someone wants
+to dance at the edge, then they can raise the limit or use current libraries. */
+
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+# ifdef EXIM_HAVE_OPENSSL_DH_BITS
+/* Added in commit 26c79d5641d; `git describe --contains` says OpenSSL_1_1_0-pre1~1022
+This predates OpenSSL_1_1_0 (before a, b, ...) so is in all 1.1.0 */
+dh_bitsize = DH_bits(dh);
+# else
+dh_bitsize = 8 * DH_size(dh);
+# endif
+#else /* 3.0.0 + */
+dh_bitsize = EVP_PKEY_get_bits(pkey);
+#endif
+
+/* Even if it is larger, we silently return success rather than cause things to
+fail out, so that a too-large DH will not knock out all TLS; it's a debatable
+choice. Likewise for a failing attempt to set one. */
+
+if (dh_bitsize <= tls_dh_max_bits)
+ {
+ if (
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+ SSL_CTX_set_tmp_dh(sctx, dh)
+#else
+ SSL_CTX_set0_tmp_dh_pkey(sctx, pkey)
+#endif
+ == 0)
+ {
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ log_write(0, LOG_MAIN|LOG_PANIC, "TLS error (D-H param setting '%s'): %s",
+ dhexpanded ? dhexpanded : US"default", ssl_errstring);
+#if OPENSSL_VERSION_NUMBER >= 0x30000000L
+ /* EVP_PKEY_free(pkey); crashes */
+#endif
+ }
+ else
+ DEBUG(D_tls)
+ debug_printf("Diffie-Hellman initialized from %s with %d-bit prime\n",
+ dhexpanded ? dhexpanded : US"default", dh_bitsize);
+ }
+else
+ DEBUG(D_tls)
+ debug_printf("dhparams '%s' %d bits, is > tls_dh_max_bits limit of %d\n",
+ dhexpanded ? dhexpanded : US"default", dh_bitsize, tls_dh_max_bits);
+
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+DH_free(dh);
+#endif
+/* The EVP_PKEY ownership stays with the ctx; do not free it */
+
+BIO_free(bio);
+return TRUE;
+}
+
+
+
+
+/*************************************************
+* Initialize for ECDH *
+*************************************************/
+
+/* Load parameters for ECDH encryption. Server only.
+
+For now, we stick to NIST P-256 because: it's simple and easy to configure;
+it avoids any patent issues that might bite redistributors; despite events in
+the news and concerns over curve choices, we're not cryptographers, we're not
+pretending to be, and this is "good enough" to be better than no support,
+protecting against most adversaries. Given another year or two, there might
+be sufficient clarity about a "right" way forward to let us make an informed
+decision, instead of a knee-jerk reaction.
+
+Longer-term, we should look at supporting both various named curves and
+external files generated with "openssl ecparam", much as we do for init_dh().
+We should also support "none" as a value, to explicitly avoid initialisation.
+
+Patches welcome.
+
+Arguments:
+ sctx The current SSL CTX (inbound or outbound)
+ errstr error string pointer
+
+Returns: TRUE if OK (nothing to set up, or setup worked)
+*/
+
+static BOOL
+init_ecdh(SSL_CTX * sctx, uschar ** errstr)
+{
+#ifdef OPENSSL_NO_ECDH
+return TRUE;
+#else
+
+uschar * exp_curve;
+int nid;
+BOOL rv;
+
+# ifndef EXIM_HAVE_ECDH
+DEBUG(D_tls)
+ debug_printf("No OpenSSL API to define ECDH parameters, skipping\n");
+return TRUE;
+# else
+
+if (!expand_check(tls_eccurve, US"tls_eccurve", &exp_curve, errstr))
+ return FALSE;
+if (!exp_curve || !*exp_curve)
+ return TRUE;
+
+/* "auto" needs to be handled carefully.
+ * OpenSSL < 1.0.2: we do not select anything, but fallback to prime256v1
+ * OpenSSL < 1.1.0: we have to call SSL_CTX_set_ecdh_auto
+ * (openssl/ssl.h defines SSL_CTRL_SET_ECDH_AUTO)
+ * OpenSSL >= 1.1.0: we do not set anything, the libray does autoselection
+ * https://github.com/openssl/openssl/commit/fe6ef2472db933f01b59cad82aa925736935984b
+ */
+if (Ustrcmp(exp_curve, "auto") == 0)
+ {
+#if OPENSSL_VERSION_NUMBER < 0x10002000L
+ DEBUG(D_tls) debug_printf(
+ "ECDH OpenSSL < 1.0.2: temp key parameter settings: overriding \"auto\" with \"prime256v1\"\n");
+ exp_curve = US"prime256v1";
+#else
+# if defined SSL_CTRL_SET_ECDH_AUTO
+ DEBUG(D_tls) debug_printf(
+ "ECDH OpenSSL 1.0.2+: temp key parameter settings: autoselection\n");
+ SSL_CTX_set_ecdh_auto(sctx, 1);
+ return TRUE;
+# else
+ DEBUG(D_tls) debug_printf(
+ "ECDH OpenSSL 1.1.0+: temp key parameter settings: default selection\n");
+ return TRUE;
+# endif
+#endif
+ }
+
+DEBUG(D_tls) debug_printf("ECDH: curve '%s'\n", exp_curve);
+if ( (nid = OBJ_sn2nid (CCS exp_curve)) == NID_undef
+# ifdef EXIM_HAVE_OPENSSL_EC_NIST2NID
+ && (nid = EC_curve_nist2nid(CCS exp_curve)) == NID_undef
+# endif
+ )
+ {
+ tls_error(string_sprintf("Unknown curve name tls_eccurve '%s'", exp_curve),
+ NULL, NULL, errstr);
+ return FALSE;
+ }
+
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+ {
+ EC_KEY * ecdh;
+ if (!(ecdh = EC_KEY_new_by_curve_name(nid)))
+ {
+ tls_error(US"Unable to create ec curve", NULL, NULL, errstr);
+ return FALSE;
+ }
+
+ /* The "tmp" in the name here refers to setting a temporary key
+ not to the stability of the interface. */
+
+ if ((rv = SSL_CTX_set_tmp_ecdh(sctx, ecdh) == 0))
+ tls_error(string_sprintf("Error enabling '%s' curve", exp_curve), NULL, NULL, errstr);
+ else
+ DEBUG(D_tls) debug_printf("ECDH: enabled '%s' curve\n", exp_curve);
+ EC_KEY_free(ecdh);
+ }
+
+#else /* v 3.0.0 + */
+
+if ((rv = SSL_CTX_set1_groups(sctx, &nid, 1)) == 0)
+ tls_error(string_sprintf("Error enabling '%s' group", exp_curve), NULL, NULL, errstr);
+else
+ DEBUG(D_tls) debug_printf("ECDH: enabled '%s' group\n", exp_curve);
+
+#endif
+
+return !rv;
+
+# endif /*EXIM_HAVE_ECDH*/
+#endif /*OPENSSL_NO_ECDH*/
+}
+
+
+
+/*************************************************
+* Expand key and cert file specs *
+*************************************************/
+
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+/*
+Arguments:
+ s SSL connection (not used)
+ export not used
+ keylength keylength
+
+Returns: pointer to generated key
+*/
+
+static RSA *
+rsa_callback(SSL *s, int export, int keylength)
+{
+RSA *rsa_key;
+#ifdef EXIM_HAVE_RSA_GENKEY_EX
+BIGNUM *bn = BN_new();
+#endif
+
+DEBUG(D_tls) debug_printf("Generating %d bit RSA key...\n", keylength);
+
+# ifdef EXIM_HAVE_RSA_GENKEY_EX
+if ( !BN_set_word(bn, (unsigned long)RSA_F4)
+ || !(rsa_key = RSA_new())
+ || !RSA_generate_key_ex(rsa_key, keylength, bn, NULL)
+ )
+# else
+if (!(rsa_key = RSA_generate_key(keylength, RSA_F4, NULL, NULL)))
+# endif
+
+ {
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ log_write(0, LOG_MAIN|LOG_PANIC, "TLS error (RSA_generate_key): %s",
+ ssl_errstring);
+ return NULL;
+ }
+return rsa_key;
+}
+#endif /* pre-3.0.0 */
+
+
+
+/* Create and install a selfsigned certificate, for use in server mode */
+/*XXX we could arrange to call this during prelo for a null tls_certificate option.
+The normal cache inval + relo will suffice.
+Just need a timer for inval. */
+
+static int
+tls_install_selfsign(SSL_CTX * sctx, uschar ** errstr)
+{
+X509 * x509 = NULL;
+EVP_PKEY * pkey;
+X509_NAME * name;
+uschar * where;
+
+DEBUG(D_tls) debug_printf("TLS: generating selfsigned server cert\n");
+where = US"allocating pkey";
+if (!(pkey = EVP_PKEY_new()))
+ goto err;
+
+where = US"allocating cert";
+if (!(x509 = X509_new()))
+ goto err;
+
+where = US"generating pkey";
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+ {
+ RSA * rsa;
+ if (!(rsa = rsa_callback(NULL, 0, 2048)))
+ goto err;
+
+ where = US"assigning pkey";
+ if (!EVP_PKEY_assign_RSA(pkey, rsa))
+ goto err;
+ }
+#else
+pkey = EVP_RSA_gen(2048);
+#endif
+
+X509_set_version(x509, 2); /* N+1 - version 3 */
+ASN1_INTEGER_set(X509_get_serialNumber(x509), 1);
+X509_gmtime_adj(X509_get_notBefore(x509), 0);
+X509_gmtime_adj(X509_get_notAfter(x509), (long)2 * 60 * 60); /* 2 hour */
+X509_set_pubkey(x509, pkey);
+
+name = X509_get_subject_name(x509);
+X509_NAME_add_entry_by_txt(name, "C",
+ MBSTRING_ASC, CUS "UK", -1, -1, 0);
+X509_NAME_add_entry_by_txt(name, "O",
+ MBSTRING_ASC, CUS "Exim Developers", -1, -1, 0);
+X509_NAME_add_entry_by_txt(name, "CN",
+ MBSTRING_ASC, CUS smtp_active_hostname, -1, -1, 0);
+X509_set_issuer_name(x509, name);
+
+where = US"signing cert";
+if (!X509_sign(x509, pkey, EVP_md5()))
+ goto err;
+
+where = US"installing selfsign cert";
+if (!SSL_CTX_use_certificate(sctx, x509))
+ goto err;
+
+where = US"installing selfsign key";
+if (!SSL_CTX_use_PrivateKey(sctx, pkey))
+ goto err;
+
+return OK;
+
+err:
+ (void) tls_error(where, NULL, NULL, errstr);
+ if (x509) X509_free(x509);
+ if (pkey) EVP_PKEY_free(pkey);
+ return DEFER;
+}
+
+
+
+
+
+
+
+/*************************************************
+* Information callback *
+*************************************************/
+
+/* The SSL library functions call this from time to time to indicate what they
+are doing. We copy the string to the debugging output when TLS debugging has
+been requested.
+
+Arguments:
+ s the SSL connection
+ where
+ ret
+
+Returns: nothing
+*/
+
+static void
+info_callback(SSL *s, int where, int ret)
+{
+DEBUG(D_tls)
+ {
+ const uschar * str;
+
+ if (where & SSL_ST_CONNECT)
+ str = US"SSL_connect";
+ else if (where & SSL_ST_ACCEPT)
+ str = US"SSL_accept";
+ else
+ str = US"SSL info (undefined)";
+
+ if (where & SSL_CB_LOOP)
+ debug_printf("%s: %s\n", str, SSL_state_string_long(s));
+ else if (where & SSL_CB_ALERT)
+ debug_printf("SSL3 alert %s:%s:%s\n",
+ str = where & SSL_CB_READ ? US"read" : US"write",
+ SSL_alert_type_string_long(ret), SSL_alert_desc_string_long(ret));
+ else if (where & SSL_CB_EXIT)
+ {
+ if (ret == 0)
+ debug_printf("%s: failed in %s\n", str, SSL_state_string_long(s));
+ else if (ret < 0)
+ debug_printf("%s: error in %s\n", str, SSL_state_string_long(s));
+ }
+ else if (where & SSL_CB_HANDSHAKE_START)
+ debug_printf("%s: hshake start: %s\n", str, SSL_state_string_long(s));
+ else if (where & SSL_CB_HANDSHAKE_DONE)
+ debug_printf("%s: hshake done: %s\n", str, SSL_state_string_long(s));
+ }
+}
+
+#ifdef OPENSSL_HAVE_KEYLOG_CB
+static void
+keylog_callback(const SSL *ssl, const char *line)
+{
+char * filename;
+FILE * fp;
+DEBUG(D_tls) debug_printf("%.200s\n", line);
+if (!(filename = getenv("SSLKEYLOGFILE"))) return;
+if (!(fp = fopen(filename, "a"))) return;
+fprintf(fp, "%s\n", line);
+fclose(fp);
+}
+#endif
+
+
+
+
+
+#ifndef DISABLE_EVENT
+static int
verify_event(tls_support * tlsp, X509 * cert, int depth, const uschar * dn,
BOOL *calledp, const BOOL *optionalp, const uschar * what)
{
uschar * yield;
X509 * old_cert;
-ev = tlsp == &tls_out ? client_static_cbinfo->event_action : event_action;
+ev = tlsp == &tls_out ? client_static_state->event_action : event_action;
if (ev)
{
DEBUG(D_tls) debug_printf("verify_event: %s %d\n", what, depth);
old_cert = tlsp->peercert;
tlsp->peercert = X509_dup(cert);
/* NB we do not bother setting peerdn */
- if ((yield = event_raise(ev, US"tls:cert", string_sprintf("%d", depth))))
+ if ((yield = event_raise(ev, US"tls:cert", string_sprintf("%d", depth), &errno)))
{
log_write(0, LOG_MAIN, "[%s] %s verify denied by event-action: "
"depth=%d cert=%s: %s",
}
DEBUG(D_tls) debug_printf("Event-action verify failure overridden "
"(host in tls_try_verify_hosts)\n");
+ tlsp->verify_override = TRUE;
}
X509_free(tlsp->peercert);
tlsp->peercert = old_cert;
*/
static int
-verify_callback(int preverify_ok, X509_STORE_CTX *x509ctx,
- tls_support *tlsp, BOOL *calledp, BOOL *optionalp)
+verify_callback(int preverify_ok, X509_STORE_CTX * x509ctx,
+ tls_support * tlsp, BOOL * calledp, BOOL * optionalp)
{
X509 * cert = X509_STORE_CTX_get_current_cert(x509ctx);
int depth = X509_STORE_CTX_get_error_depth(x509ctx);
uschar dn[256];
-X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn));
+if (!X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn)))
+ {
+ DEBUG(D_tls) debug_printf("X509_NAME_oneline() error\n");
+ log_write(0, LOG_MAIN, "[%s] SSL verify error: internal error",
+ tlsp == &tls_out ? deliver_host_address : sender_host_address);
+ return 0;
+ }
dn[sizeof(dn)-1] = '\0';
+tlsp->verify_override = FALSE;
if (preverify_ok == 0)
{
uschar * extra = verify_mode ? string_sprintf(" (during %c-verify for [%s])",
}
DEBUG(D_tls) debug_printf("SSL verify failure overridden (host in "
"tls_try_verify_hosts)\n");
+ tlsp->verify_override = TRUE;
}
else if (depth != 0)
{
DEBUG(D_tls) debug_printf("SSL verify ok: depth=%d SN=%s\n", depth, dn);
#ifndef DISABLE_OCSP
- if (tlsp == &tls_out && client_static_cbinfo->u_ocsp.client.verify_store)
+ if (tlsp == &tls_out && client_static_state->u_ocsp.client.verify_store)
{ /* client, wanting stapling */
/* Add the server cert's signing chain as the one
for the verification of the OCSP stapled information. */
- if (!X509_STORE_add_cert(client_static_cbinfo->u_ocsp.client.verify_store,
+ if (!X509_STORE_add_cert(client_static_state->u_ocsp.client.verify_store,
cert))
ERR_clear_error();
- sk_X509_push(client_static_cbinfo->verify_stack, cert);
+ sk_X509_push(client_static_state->verify_stack, cert);
}
#endif
#ifndef DISABLE_EVENT
const uschar * verify_cert_hostnames;
if ( tlsp == &tls_out
- && ((verify_cert_hostnames = client_static_cbinfo->verify_cert_hostnames)))
- /* client, wanting hostname check */
+ && ((verify_cert_hostnames = client_static_state->verify_cert_hostnames)))
+ /* client, wanting hostname check */
{
#ifdef EXIM_HAVE_OPENSSL_CHECKHOST
tlsp->peercert = X509_dup(cert); /* record failing cert */
return 0; /* reject */
}
- DEBUG(D_tls) debug_printf("SSL verify failure overridden (host in "
+ DEBUG(D_tls) debug_printf("SSL verify name failure overridden (host in "
"tls_try_verify_hosts)\n");
+ tlsp->verify_override = TRUE;
}
}
DEBUG(D_tls) debug_printf("SSL%s verify ok: depth=0 SN=%s\n",
*calledp ? "" : " authenticated", dn);
- if (!*calledp) tlsp->certificate_verified = TRUE;
*calledp = TRUE;
}
BOOL dummy_called, optional = FALSE;
#endif
-X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn));
+if (!X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn)))
+ {
+ DEBUG(D_tls) debug_printf("X509_NAME_oneline() error\n");
+ log_write(0, LOG_MAIN, "[%s] SSL verify error: internal error",
+ deliver_host_address);
+ return 0;
+ }
dn[sizeof(dn)-1] = '\0';
DEBUG(D_tls) debug_printf("verify_callback_client_dane: %s depth %d %s\n",
if (preverify_ok == 1)
{
- tls_out.dane_verified = tls_out.certificate_verified = TRUE;
+ tls_out.dane_verified = TRUE;
#ifndef DISABLE_OCSP
- if (client_static_cbinfo->u_ocsp.client.verify_store)
+ if (client_static_state->u_ocsp.client.verify_store)
{ /* client, wanting stapling */
/* Add the server cert's signing chain as the one
for the verification of the OCSP stapled information. */
- if (!X509_STORE_add_cert(client_static_cbinfo->u_ocsp.client.verify_store,
+ if (!X509_STORE_add_cert(client_static_state->u_ocsp.client.verify_store,
cert))
ERR_clear_error();
- sk_X509_push(client_static_cbinfo->verify_stack, cert);
+ sk_X509_push(client_static_state->verify_stack, cert);
}
#endif
}
#endif /*SUPPORT_DANE*/
+#ifndef DISABLE_OCSP
/*************************************************
-* Information callback *
+* Load OCSP information into state *
*************************************************/
+/* Called to load the server OCSP response from the given file into memory, once
+caller has determined this is needed. Checks validity. Debugs a message
+if invalid.
-/* The SSL library functions call this from time to time to indicate what they
-are doing. We copy the string to the debugging output when TLS debugging has
-been requested.
+ASSUMES: single response, for single cert.
Arguments:
- s the SSL connection
- where
- ret
-
-Returns: nothing
+ state various parts of session state
+ filename the filename putatively holding an OCSP response
+ is_pem file is PEM format; otherwise is DER
*/
static void
-info_callback(SSL *s, int where, int ret)
+ocsp_load_response(exim_openssl_state_st * state, const uschar * filename,
+ BOOL is_pem)
{
-where = where;
-ret = ret;
-DEBUG(D_tls) debug_printf("SSL info: %s\n", SSL_state_string_long(s));
-}
+BIO * bio;
+OCSP_RESPONSE * resp;
+OCSP_BASICRESP * basic_response;
+OCSP_SINGLERESP * single_response;
+ASN1_GENERALIZEDTIME * rev, * thisupd, * nextupd;
+STACK_OF(X509) * sk;
+unsigned long verify_flags;
+int status, reason, i;
+DEBUG(D_tls)
+ debug_printf("tls_ocsp_file (%s) '%s'\n", is_pem ? "PEM" : "DER", filename);
+if (!filename || !*filename) return;
-/*************************************************
-* Initialize for DH *
-*************************************************/
+ERR_clear_error();
+if (!(bio = BIO_new_file(CS filename, "rb")))
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "Failed to open OCSP response file \"%s\": %.100s",
+ filename, ERR_reason_error_string(ERR_get_error()));
+ return;
+ }
-/* If dhparam is set, expand it, and load up the parameters for DH encryption.
+if (is_pem)
+ {
+ uschar * data, * freep;
+ char * dummy;
+ long len;
+ if (!PEM_read_bio(bio, &dummy, &dummy, &data, &len))
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "Failed to read PEM file \"%s\": %.100s",
+ filename, ERR_reason_error_string(ERR_get_error()));
+ return;
+ }
+ freep = data;
+ resp = d2i_OCSP_RESPONSE(NULL, CUSS &data, len);
+ OPENSSL_free(freep);
+ }
+else
+ resp = d2i_OCSP_RESPONSE_bio(bio, NULL);
+BIO_free(bio);
-Arguments:
- sctx The current SSL CTX (inbound or outbound)
- dhparam DH parameter file or fixed parameter identity string
- host connected host, if client; NULL if server
- errstr error string pointer
+if (!resp)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "Error reading OCSP response from \"%s\": %s",
+ filename, ERR_reason_error_string(ERR_get_error()));
+ return;
+ }
-Returns: TRUE if OK (nothing to set up, or setup worked)
-*/
+if ((status = OCSP_response_status(resp)) != OCSP_RESPONSE_STATUS_SUCCESSFUL)
+ {
+ DEBUG(D_tls) debug_printf("OCSP response not valid: %s (%d)\n",
+ OCSP_response_status_str(status), status);
+ goto bad;
+ }
-static BOOL
-init_dh(SSL_CTX *sctx, uschar *dhparam, const host_item *host, uschar ** errstr)
-{
-BIO *bio;
-DH *dh;
-uschar *dhexpanded;
-const char *pem;
-int dh_bitsize;
+#ifdef notdef
+ {
+ BIO * bp = BIO_new_fp(debug_file, BIO_NOCLOSE);
+ OCSP_RESPONSE_print(bp, resp, 0); /* extreme debug: stapling content */
+ BIO_free(bp);
+ }
+#endif
-if (!expand_check(dhparam, US"tls_dhparam", &dhexpanded, errstr))
- return FALSE;
+if (!(basic_response = OCSP_response_get1_basic(resp)))
+ {
+ DEBUG(D_tls)
+ debug_printf("OCSP response parse error: unable to extract basic response.\n");
+ goto bad;
+ }
+
+sk = state->verify_stack;
+verify_flags = OCSP_NOVERIFY; /* check sigs, but not purpose */
+
+/* May need to expose ability to adjust those flags?
+OCSP_NOSIGS OCSP_NOVERIFY OCSP_NOCHAIN OCSP_NOCHECKS OCSP_NOEXPLICIT
+OCSP_TRUSTOTHER OCSP_NOINTERN */
+
+/* This does a full verify on the OCSP proof before we load it for serving
+up; possibly overkill - just date-checks might be nice enough.
+
+OCSP_basic_verify takes a "store" arg, but does not
+use it for the chain verification, which is all we do
+when OCSP_NOVERIFY is set. The content from the wire
+"basic_response" and a cert-stack "sk" are all that is used.
+
+We have a stack, loaded in setup_certs() if tls_verify_certificates
+was a file (not a directory, or "system"). It is unfortunate we
+cannot used the connection context store, as that would neatly
+handle the "system" case too, but there seems to be no library
+function for getting a stack from a store.
+[ In OpenSSL 1.1 - ? X509_STORE_CTX_get0_chain(ctx) ? ]
+We do not free the stack since it could be needed a second time for
+SNI handling.
+
+Separately we might try to replace using OCSP_basic_verify() - which seems to not
+be a public interface into the OpenSSL library (there's no manual entry) -
+But what with? We also use OCSP_basic_verify in the client stapling callback.
+And there we NEED it; we must verify that status... unless the
+library does it for us anyway? */
-if (!dhexpanded || !*dhexpanded)
- bio = BIO_new_mem_buf(CS std_dh_prime_default(), -1);
-else if (dhexpanded[0] == '/')
+if ((i = OCSP_basic_verify(basic_response, sk, NULL, verify_flags)) < 0)
{
- if (!(bio = BIO_new_file(CS dhexpanded, "r")))
+ DEBUG(D_tls)
{
- tls_error(string_sprintf("could not read dhparams file %s", dhexpanded),
- host, US strerror(errno), errstr);
- return FALSE;
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ debug_printf("OCSP response verify failure: %s\n", US ssl_errstring);
}
+ goto bad;
}
-else
- {
- if (Ustrcmp(dhexpanded, "none") == 0)
- {
- DEBUG(D_tls) debug_printf("Requested no DH parameters.\n");
- return TRUE;
- }
- if (!(pem = std_dh_prime_named(dhexpanded)))
- {
- tls_error(string_sprintf("Unknown standard DH prime \"%s\"", dhexpanded),
- host, US strerror(errno), errstr);
- return FALSE;
- }
- bio = BIO_new_mem_buf(CS pem, -1);
- }
+/* Here's the simplifying assumption: there's only one response, for the
+one certificate we use, and nothing for anything else in a chain. If this
+proves false, we need to extract a cert id from our issued cert
+(tls_certificate) and use that for OCSP_resp_find_status() (which finds the
+right cert in the stack and then calls OCSP_single_get0_status()).
+
+I'm hoping to avoid reworking a bunch more of how we handle state here.
+
+XXX that will change when we add support for (TLS1.3) whole-chain stapling
+*/
-if (!(dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL)))
+if (!(single_response = OCSP_resp_get0(basic_response, 0)))
{
- BIO_free(bio);
- tls_error(string_sprintf("Could not read tls_dhparams \"%s\"", dhexpanded),
- host, NULL, errstr);
- return FALSE;
+ DEBUG(D_tls)
+ debug_printf("Unable to get first response from OCSP basic response.\n");
+ goto bad;
}
-/* note: our default limit of 2236 is not a multiple of 8; the limit comes from
- * an NSS limit, and the GnuTLS APIs handle bit-sizes fine, so we went with
- * 2236. But older OpenSSL can only report in bytes (octets), not bits.
- * If someone wants to dance at the edge, then they can raise the limit or use
- * current libraries. */
-#ifdef EXIM_HAVE_OPENSSL_DH_BITS
-/* Added in commit 26c79d5641d; `git describe --contains` says OpenSSL_1_1_0-pre1~1022
- * This predates OpenSSL_1_1_0 (before a, b, ...) so is in all 1.1.0 */
-dh_bitsize = DH_bits(dh);
-#else
-dh_bitsize = 8 * DH_size(dh);
-#endif
+status = OCSP_single_get0_status(single_response, &reason, &rev, &thisupd, &nextupd);
+if (status != V_OCSP_CERTSTATUS_GOOD)
+ {
+ DEBUG(D_tls) debug_printf("OCSP response bad cert status: %s (%d) %s (%d)\n",
+ OCSP_cert_status_str(status), status,
+ OCSP_crl_reason_str(reason), reason);
+ goto bad;
+ }
-/* Even if it is larger, we silently return success rather than cause things
- * to fail out, so that a too-large DH will not knock out all TLS; it's a
- * debatable choice. */
-if (dh_bitsize > tls_dh_max_bits)
+if (!OCSP_check_validity(thisupd, nextupd, EXIM_OCSP_SKEW_SECONDS, EXIM_OCSP_MAX_AGE))
{
- DEBUG(D_tls)
- debug_printf("dhparams file %d bits, is > tls_dh_max_bits limit of %d\n",
- dh_bitsize, tls_dh_max_bits);
+ DEBUG(D_tls) debug_printf("OCSP status invalid times.\n");
+ goto bad;
}
-else
+
+supply_response:
+ /* Add the resp to the list used by tls_server_stapling_cb() */
{
- SSL_CTX_set_tmp_dh(sctx, dh);
- DEBUG(D_tls)
- debug_printf("Diffie-Hellman initialized from %s with %d-bit prime\n",
- dhexpanded ? dhexpanded : US"default", dh_bitsize);
+ ocsp_resplist ** op = &state->u_ocsp.server.olist, * oentry;
+ while (oentry = *op)
+ op = &oentry->next;
+ *op = oentry = store_get(sizeof(ocsp_resplist), FALSE);
+ oentry->next = NULL;
+ oentry->resp = resp;
}
+return;
-DH_free(dh);
-BIO_free(bio);
+bad:
+ if (f.running_in_test_harness)
+ {
+ extern char ** environ;
+ if (environ) for (uschar ** p = USS environ; *p; p++)
+ if (Ustrncmp(*p, "EXIM_TESTHARNESS_DISABLE_OCSPVALIDITYCHECK", 42) == 0)
+ {
+ DEBUG(D_tls) debug_printf("Supplying known bad OCSP response\n");
+ goto supply_response;
+ }
+ }
+return;
+}
-return TRUE;
+
+static void
+ocsp_free_response_list(exim_openssl_state_st * cbinfo)
+{
+for (ocsp_resplist * olist = cbinfo->u_ocsp.server.olist; olist;
+ olist = olist->next)
+ OCSP_RESPONSE_free(olist->resp);
+cbinfo->u_ocsp.server.olist = NULL;
}
+#endif /*!DISABLE_OCSP*/
-/*************************************************
-* Initialize for ECDH *
-*************************************************/
-/* Load parameters for ECDH encryption.
+static int
+tls_add_certfile(SSL_CTX * sctx, exim_openssl_state_st * cbinfo, uschar * file,
+ uschar ** errstr)
+{
+DEBUG(D_tls) debug_printf("tls_certificate file '%s'\n", file);
+if (!SSL_CTX_use_certificate_chain_file(sctx, CS file))
+ return tls_error(string_sprintf(
+ "SSL_CTX_use_certificate_chain_file file=%s", file),
+ cbinfo->host, NULL, errstr);
+return 0;
+}
+
+static int
+tls_add_pkeyfile(SSL_CTX * sctx, exim_openssl_state_st * cbinfo, uschar * file,
+ uschar ** errstr)
+{
+DEBUG(D_tls) debug_printf("tls_privatekey file '%s'\n", file);
+if (!SSL_CTX_use_PrivateKey_file(sctx, CS file, SSL_FILETYPE_PEM))
+ return tls_error(string_sprintf(
+ "SSL_CTX_use_PrivateKey_file file=%s", file), cbinfo->host, NULL, errstr);
+return 0;
+}
-For now, we stick to NIST P-256 because: it's simple and easy to configure;
-it avoids any patent issues that might bite redistributors; despite events in
-the news and concerns over curve choices, we're not cryptographers, we're not
-pretending to be, and this is "good enough" to be better than no support,
-protecting against most adversaries. Given another year or two, there might
-be sufficient clarity about a "right" way forward to let us make an informed
-decision, instead of a knee-jerk reaction.
-Longer-term, we should look at supporting both various named curves and
-external files generated with "openssl ecparam", much as we do for init_dh().
-We should also support "none" as a value, to explicitly avoid initialisation.
-Patches welcome.
+
+/* Called once during tls_init and possibly again during TLS setup, for a
+new context, if Server Name Indication was used and tls_sni was seen in
+the certificate string.
Arguments:
- sctx The current SSL CTX (inbound or outbound)
- host connected host, if client; NULL if server
- errstr error string pointer
+ sctx the SSL_CTX* to update
+ state various parts of session state
+ errstr error string pointer
-Returns: TRUE if OK (nothing to set up, or setup worked)
+Returns: OK/DEFER/FAIL
*/
-static BOOL
-init_ecdh(SSL_CTX * sctx, host_item * host, uschar ** errstr)
+static int
+tls_expand_session_files(SSL_CTX * sctx, exim_openssl_state_st * state,
+ uschar ** errstr)
{
-#ifdef OPENSSL_NO_ECDH
-return TRUE;
-#else
+uschar * expanded;
-EC_KEY * ecdh;
-uschar * exp_curve;
-int nid;
-BOOL rv;
+if (!state->certificate)
+ {
+ if (!state->is_server) /* client */
+ return OK;
+ /* server */
+ if (tls_install_selfsign(sctx, errstr) != OK)
+ return DEFER;
+ }
+else
+ {
+ int err;
-if (host) /* No ECDH setup for clients, only for servers */
- return TRUE;
+ if ( !reexpand_tls_files_for_sni
+ && ( Ustrstr(state->certificate, US"tls_sni")
+ || Ustrstr(state->certificate, US"tls_in_sni")
+ || Ustrstr(state->certificate, US"tls_out_sni")
+ ) )
+ reexpand_tls_files_for_sni = TRUE;
-# ifndef EXIM_HAVE_ECDH
-DEBUG(D_tls)
- debug_printf("No OpenSSL API to define ECDH parameters, skipping\n");
-return TRUE;
-# else
+ if (!expand_check(state->certificate, US"tls_certificate", &expanded, errstr))
+ return DEFER;
-if (!expand_check(tls_eccurve, US"tls_eccurve", &exp_curve, errstr))
- return FALSE;
-if (!exp_curve || !*exp_curve)
- return TRUE;
+ if (expanded)
+ if (state->is_server)
+ {
+ const uschar * file_list = expanded;
+ int sep = 0;
+ uschar * file;
+#ifndef DISABLE_OCSP
+ const uschar * olist = state->u_ocsp.server.file;
+ int osep = 0;
+ uschar * ofile;
+ BOOL fmt_pem = FALSE;
-/* "auto" needs to be handled carefully.
- * OpenSSL < 1.0.2: we do not select anything, but fallback to prime256v1
- * OpenSSL < 1.1.0: we have to call SSL_CTX_set_ecdh_auto
- * (openssl/ssl.h defines SSL_CTRL_SET_ECDH_AUTO)
- * OpenSSL >= 1.1.0: we do not set anything, the libray does autoselection
- * https://github.com/openssl/openssl/commit/fe6ef2472db933f01b59cad82aa925736935984b
- */
-if (Ustrcmp(exp_curve, "auto") == 0)
- {
-#if OPENSSL_VERSION_NUMBER < 0x10002000L
- DEBUG(D_tls) debug_printf(
- "ECDH OpenSSL < 1.0.2: temp key parameter settings: overriding \"auto\" with \"prime256v1\"\n");
- exp_curve = US"prime256v1";
-#else
-# if defined SSL_CTRL_SET_ECDH_AUTO
- DEBUG(D_tls) debug_printf(
- "ECDH OpenSSL 1.0.2+ temp key parameter settings: autoselection\n");
- SSL_CTX_set_ecdh_auto(sctx, 1);
- return TRUE;
-# else
- DEBUG(D_tls) debug_printf(
- "ECDH OpenSSL 1.1.0+ temp key parameter settings: default selection\n");
- return TRUE;
-# endif
+ if (olist)
+ if (!expand_check(olist, US"tls_ocsp_file", USS &olist, errstr))
+ return DEFER;
+ if (olist && !*olist)
+ olist = NULL;
+
+ if ( state->u_ocsp.server.file_expanded && olist
+ && (Ustrcmp(olist, state->u_ocsp.server.file_expanded) == 0))
+ {
+ DEBUG(D_tls) debug_printf(" - value unchanged, using existing values\n");
+ olist = NULL;
+ }
+ else
+ {
+ ocsp_free_response_list(state);
+ state->u_ocsp.server.file_expanded = olist;
+ }
#endif
- }
-DEBUG(D_tls) debug_printf("ECDH: curve '%s'\n", exp_curve);
-if ( (nid = OBJ_sn2nid (CCS exp_curve)) == NID_undef
-# ifdef EXIM_HAVE_OPENSSL_EC_NIST2NID
- && (nid = EC_curve_nist2nid(CCS exp_curve)) == NID_undef
-# endif
- )
- {
- tls_error(string_sprintf("Unknown curve name tls_eccurve '%s'", exp_curve),
- host, NULL, errstr);
- return FALSE;
- }
+ while (file = string_nextinlist(&file_list, &sep, NULL, 0))
+ {
+ if ((err = tls_add_certfile(sctx, state, file, errstr)))
+ return err;
-if (!(ecdh = EC_KEY_new_by_curve_name(nid)))
- {
- tls_error(US"Unable to create ec curve", host, NULL, errstr);
- return FALSE;
- }
+#ifndef DISABLE_OCSP
+ if (olist)
+ if ((ofile = string_nextinlist(&olist, &osep, NULL, 0)))
+ {
+ if (Ustrncmp(ofile, US"PEM ", 4) == 0)
+ {
+ fmt_pem = TRUE;
+ ofile += 4;
+ }
+ else if (Ustrncmp(ofile, US"DER ", 4) == 0)
+ {
+ fmt_pem = FALSE;
+ ofile += 4;
+ }
+ ocsp_load_response(state, ofile, fmt_pem);
+ }
+ else
+ DEBUG(D_tls) debug_printf("ran out of ocsp file list\n");
+#endif
+ }
+ }
+ else /* would there ever be a need for multiple client certs? */
+ if ((err = tls_add_certfile(sctx, state, expanded, errstr)))
+ return err;
-/* The "tmp" in the name here refers to setting a temporary key
-not to the stability of the interface. */
+ if ( state->privatekey
+ && !expand_check(state->privatekey, US"tls_privatekey", &expanded, errstr))
+ return DEFER;
-if ((rv = SSL_CTX_set_tmp_ecdh(sctx, ecdh) == 0))
- tls_error(string_sprintf("Error enabling '%s' curve", exp_curve), host, NULL, errstr);
-else
- DEBUG(D_tls) debug_printf("ECDH: enabled '%s' curve\n", exp_curve);
+ /* If expansion was forced to fail, key_expanded will be NULL. If the result
+ of the expansion is an empty string, ignore it also, and assume the private
+ key is in the same file as the certificate. */
-EC_KEY_free(ecdh);
-return !rv;
+ if (expanded && *expanded)
+ if (state->is_server)
+ {
+ const uschar * file_list = expanded;
+ int sep = 0;
+ uschar * file;
-# endif /*EXIM_HAVE_ECDH*/
-#endif /*OPENSSL_NO_ECDH*/
+ while (file = string_nextinlist(&file_list, &sep, NULL, 0))
+ if ((err = tls_add_pkeyfile(sctx, state, file, errstr)))
+ return err;
+ }
+ else /* would there ever be a need for multiple client certs? */
+ if ((err = tls_add_pkeyfile(sctx, state, expanded, errstr)))
+ return err;
+ }
+
+return OK;
}
-#ifndef DISABLE_OCSP
-/*************************************************
-* Load OCSP information into state *
-*************************************************/
-/* Called to load the server OCSP response from the given file into memory, once
-caller has determined this is needed. Checks validity. Debugs a message
-if invalid.
+/**************************************************
+* One-time init credentials for server and client *
+**************************************************/
-ASSUMES: single response, for single cert.
+static void
+normalise_ciphers(uschar ** ciphers, const uschar * pre_expansion_ciphers)
+{
+uschar * s = *ciphers;
+
+if (!s || !Ustrchr(s, '_')) return; /* no change needed */
+
+if (s == pre_expansion_ciphers)
+ s = string_copy(s); /* get writable copy */
+
+for (uschar * t = s; *t; t++) if (*t == '_') *t = '-';
+*ciphers = s;
+}
+
+static int
+server_load_ciphers(SSL_CTX * ctx, exim_openssl_state_st * state,
+ uschar * ciphers, uschar ** errstr)
+{
+DEBUG(D_tls) debug_printf("required ciphers: %s\n", ciphers);
+if (!SSL_CTX_set_cipher_list(ctx, CS ciphers))
+ return tls_error(US"SSL_CTX_set_cipher_list", NULL, NULL, errstr);
+state->server_cipher_list = ciphers;
+return OK;
+}
-Arguments:
- sctx the SSL_CTX* to update
- cbinfo various parts of session state
- expanded the filename putatively holding an OCSP response
-*/
-static void
-ocsp_load_response(SSL_CTX *sctx, tls_ext_ctx_cb *cbinfo, const uschar *expanded)
+static int
+lib_ctx_new(SSL_CTX ** ctxp, host_item * host, uschar ** errstr)
{
-BIO * bio;
-OCSP_RESPONSE * resp;
-OCSP_BASICRESP * basic_response;
-OCSP_SINGLERESP * single_response;
-ASN1_GENERALIZEDTIME * rev, * thisupd, * nextupd;
-STACK_OF(X509) * sk;
-unsigned long verify_flags;
-int status, reason, i;
+SSL_CTX * ctx;
+#ifdef EXIM_HAVE_OPENSSL_TLS_METHOD
+if (!(ctx = SSL_CTX_new(host ? TLS_client_method() : TLS_server_method())))
+#else
+if (!(ctx = SSL_CTX_new(host ? SSLv23_client_method() : SSLv23_server_method())))
+#endif
+ return tls_error(US"SSL_CTX_new", host, NULL, errstr);
-cbinfo->u_ocsp.server.file_expanded = string_copy(expanded);
-if (cbinfo->u_ocsp.server.response)
- {
- OCSP_RESPONSE_free(cbinfo->u_ocsp.server.response);
- cbinfo->u_ocsp.server.response = NULL;
- }
+/* Set up the information callback, which outputs if debugging is at a suitable
+level. */
-if (!(bio = BIO_new_file(CS cbinfo->u_ocsp.server.file_expanded, "rb")))
+DEBUG(D_tls)
{
- DEBUG(D_tls) debug_printf("Failed to open OCSP response file \"%s\"\n",
- cbinfo->u_ocsp.server.file_expanded);
- return;
+ SSL_CTX_set_info_callback(ctx, (void (*)())info_callback);
+#if defined(EXIM_HAVE_OPESSL_TRACE) && !defined(OPENSSL_NO_SSL_TRACE)
+ /* this needs a debug build of OpenSSL */
+ SSL_CTX_set_msg_callback(ctx, (void (*)())SSL_trace);
+#endif
+#ifdef OPENSSL_HAVE_KEYLOG_CB
+ SSL_CTX_set_keylog_callback(ctx, (void (*)())keylog_callback);
+#endif
}
-resp = d2i_OCSP_RESPONSE_bio(bio, NULL);
-BIO_free(bio);
-if (!resp)
- {
- DEBUG(D_tls) debug_printf("Error reading OCSP response.\n");
- return;
- }
+/* Automatically re-try reads/writes after renegotiation. */
+(void) SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
+*ctxp = ctx;
+return OK;
+}
-if ((status = OCSP_response_status(resp)) != OCSP_RESPONSE_STATUS_SUCCESSFUL)
- {
- DEBUG(D_tls) debug_printf("OCSP response not valid: %s (%d)\n",
- OCSP_response_status_str(status), status);
- goto bad;
- }
-if (!(basic_response = OCSP_response_get1_basic(resp)))
- {
- DEBUG(D_tls)
- debug_printf("OCSP response parse error: unable to extract basic response.\n");
- goto bad;
- }
+static unsigned
+tls_server_creds_init(void)
+{
+SSL_CTX * ctx;
+uschar * dummy_errstr;
+unsigned lifetime = 0;
-sk = cbinfo->verify_stack;
-verify_flags = OCSP_NOVERIFY; /* check sigs, but not purpose */
+tls_openssl_init();
-/* May need to expose ability to adjust those flags?
-OCSP_NOSIGS OCSP_NOVERIFY OCSP_NOCHAIN OCSP_NOCHECKS OCSP_NOEXPLICIT
-OCSP_TRUSTOTHER OCSP_NOINTERN */
+state_server.lib_state = null_tls_preload;
-/* This does a full verify on the OCSP proof before we load it for serving
-up; possibly overkill - just date-checks might be nice enough.
+if (lib_ctx_new(&ctx, NULL, &dummy_errstr) != OK)
+ return 0;
+state_server.lib_state.lib_ctx = ctx;
-OCSP_basic_verify takes a "store" arg, but does not
-use it for the chain verification, which is all we do
-when OCSP_NOVERIFY is set. The content from the wire
-"basic_response" and a cert-stack "sk" are all that is used.
+/* Preload DH params and EC curve */
-We have a stack, loaded in setup_certs() if tls_verify_certificates
-was a file (not a directory, or "system"). It is unfortunate we
-cannot used the connection context store, as that would neatly
-handle the "system" case too, but there seems to be no library
-function for getting a stack from a store.
-[ In OpenSSL 1.1 - ? X509_STORE_CTX_get0_chain(ctx) ? ]
-We do not free the stack since it could be needed a second time for
-SNI handling.
+if (opt_unset_or_noexpand(tls_dhparam))
+ {
+ DEBUG(D_tls) debug_printf("TLS: preloading DH params for server\n");
+ if (init_dh(ctx, tls_dhparam, &dummy_errstr))
+ state_server.lib_state.dh = TRUE;
+ }
+else
+ DEBUG(D_tls) debug_printf("TLS: not preloading DH params for server\n");
+if (opt_unset_or_noexpand(tls_eccurve))
+ {
+ DEBUG(D_tls) debug_printf("TLS: preloading ECDH curve for server\n");
+ if (init_ecdh(ctx, &dummy_errstr))
+ state_server.lib_state.ecdh = TRUE;
+ }
+else
+ DEBUG(D_tls) debug_printf("TLS: not preloading ECDH curve for server\n");
-Separately we might try to replace using OCSP_basic_verify() - which seems to not
-be a public interface into the OpenSSL library (there's no manual entry) -
-But what with? We also use OCSP_basic_verify in the client stapling callback.
-And there we NEED it; we must verify that status... unless the
-library does it for us anyway? */
+#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
+/* If we can, preload the server-side cert, key and ocsp */
-if ((i = OCSP_basic_verify(basic_response, sk, NULL, verify_flags)) < 0)
+if ( opt_set_and_noexpand(tls_certificate)
+# ifndef DISABLE_OCSP
+ && opt_unset_or_noexpand(tls_ocsp_file)
+#endif
+ && opt_unset_or_noexpand(tls_privatekey))
{
- DEBUG(D_tls)
+ /* Set watches on the filenames. The implementation does de-duplication
+ so we can just blindly do them all. */
+
+ if ( tls_set_watch(tls_certificate, TRUE)
+# ifndef DISABLE_OCSP
+ && tls_set_watch(tls_ocsp_file, TRUE)
+#endif
+ && tls_set_watch(tls_privatekey, TRUE))
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
- debug_printf("OCSP response verify failure: %s\n", US ssl_errstring);
+ state_server.certificate = tls_certificate;
+ state_server.privatekey = tls_privatekey;
+#ifndef DISABLE_OCSP
+ state_server.u_ocsp.server.file = tls_ocsp_file;
+#endif
+
+ DEBUG(D_tls) debug_printf("TLS: preloading server certs\n");
+ if (tls_expand_session_files(ctx, &state_server, &dummy_errstr) == OK)
+ state_server.lib_state.conn_certs = TRUE;
+ }
+ }
+else if ( !tls_certificate && !tls_privatekey
+# ifndef DISABLE_OCSP
+ && !tls_ocsp_file
+#endif
+ )
+ { /* Generate & preload a selfsigned cert. No files to watch. */
+ if (tls_expand_session_files(ctx, &state_server, &dummy_errstr) == OK)
+ {
+ state_server.lib_state.conn_certs = TRUE;
+ lifetime = f.running_in_test_harness ? 2 : 60 * 60; /* 1 hour */
}
- goto bad;
}
+else
+ DEBUG(D_tls) debug_printf("TLS: not preloading server certs\n");
-/* Here's the simplifying assumption: there's only one response, for the
-one certificate we use, and nothing for anything else in a chain. If this
-proves false, we need to extract a cert id from our issued cert
-(tls_certificate) and use that for OCSP_resp_find_status() (which finds the
-right cert in the stack and then calls OCSP_single_get0_status()).
-I'm hoping to avoid reworking a bunch more of how we handle state here. */
+/* If we can, preload the Authorities for checking client certs against.
+Actual choice to do verify is made (tls_{,try_}verify_hosts)
+at TLS conn startup */
-if (!(single_response = OCSP_resp_get0(basic_response, 0)))
+if ( opt_set_and_noexpand(tls_verify_certificates)
+ && opt_unset_or_noexpand(tls_crl))
{
- DEBUG(D_tls)
- debug_printf("Unable to get first response from OCSP basic response.\n");
- goto bad;
- }
+ /* Watch the default dir also as they are always included */
-status = OCSP_single_get0_status(single_response, &reason, &rev, &thisupd, &nextupd);
-if (status != V_OCSP_CERTSTATUS_GOOD)
- {
- DEBUG(D_tls) debug_printf("OCSP response bad cert status: %s (%d) %s (%d)\n",
- OCSP_cert_status_str(status), status,
- OCSP_crl_reason_str(reason), reason);
- goto bad;
- }
+ if ( tls_set_watch(CUS X509_get_default_cert_file(), FALSE)
+ && tls_set_watch(tls_verify_certificates, FALSE)
+ && tls_set_watch(tls_crl, FALSE))
+ {
+ DEBUG(D_tls) debug_printf("TLS: preloading CA bundle for server\n");
-if (!OCSP_check_validity(thisupd, nextupd, EXIM_OCSP_SKEW_SECONDS, EXIM_OCSP_MAX_AGE))
- {
- DEBUG(D_tls) debug_printf("OCSP status invalid times.\n");
- goto bad;
+ if (setup_certs(ctx, tls_verify_certificates, tls_crl, NULL, &dummy_errstr)
+ == OK)
+ state_server.lib_state.cabundle = TRUE;
+ }
}
+else
+ DEBUG(D_tls) debug_printf("TLS: not preloading CA bundle for server\n");
+#endif /* EXIM_HAVE_INOTIFY */
-supply_response:
- cbinfo->u_ocsp.server.response = resp; /*XXX stack?*/
-return;
-bad:
- if (running_in_test_harness)
- {
- extern char ** environ;
- uschar ** p;
- if (environ) for (p = USS environ; *p; p++)
- if (Ustrncmp(*p, "EXIM_TESTHARNESS_DISABLE_OCSPVALIDITYCHECK", 42) == 0)
- {
- DEBUG(D_tls) debug_printf("Supplying known bad OCSP response\n");
- goto supply_response;
- }
- }
-return;
+/* If we can, preload the ciphers control string */
+
+if (opt_set_and_noexpand(tls_require_ciphers))
+ {
+ DEBUG(D_tls) debug_printf("TLS: preloading cipher list for server\n");
+ normalise_ciphers(&tls_require_ciphers, tls_require_ciphers);
+ if (server_load_ciphers(ctx, &state_server, tls_require_ciphers,
+ &dummy_errstr) == OK)
+ state_server.lib_state.pri_string = TRUE;
+ }
+else
+ DEBUG(D_tls) debug_printf("TLS: not preloading cipher list for server\n");
+return lifetime;
}
-#endif /*!DISABLE_OCSP*/
-/* Create and install a selfsigned certificate, for use in server mode */
+/* Preload whatever creds are static, onto a transport. The client can then
+just copy the pointer as it starts up.
+Called from the daemon after a cache-invalidate with watch set; called from
+a queue-run startup with watch clear. */
-static int
-tls_install_selfsign(SSL_CTX * sctx, uschar ** errstr)
+static void
+tls_client_creds_init(transport_instance * t, BOOL watch)
{
-X509 * x509 = NULL;
-EVP_PKEY * pkey;
-RSA * rsa;
-X509_NAME * name;
-uschar * where;
+smtp_transport_options_block * ob = t->options_block;
+exim_openssl_state_st tpt_dummy_state;
+host_item * dummy_host = (host_item *)1;
+uschar * dummy_errstr;
+SSL_CTX * ctx;
-where = US"allocating pkey";
-if (!(pkey = EVP_PKEY_new()))
- goto err;
+tls_openssl_init();
-where = US"allocating cert";
-if (!(x509 = X509_new()))
- goto err;
+ob->tls_preload = null_tls_preload;
+if (lib_ctx_new(&ctx, dummy_host, &dummy_errstr) != OK)
+ return;
+ob->tls_preload.lib_ctx = ctx;
-where = US"generating pkey";
-if (!(rsa = rsa_callback(NULL, 0, 1024)))
- goto err;
+tpt_dummy_state.lib_state = ob->tls_preload;
-where = US"assigning pkey";
-if (!EVP_PKEY_assign_RSA(pkey, rsa))
- goto err;
+#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
+if ( opt_set_and_noexpand(ob->tls_certificate)
+ && opt_unset_or_noexpand(ob->tls_privatekey))
+ {
+ if ( !watch
+ || ( tls_set_watch(ob->tls_certificate, FALSE)
+ && tls_set_watch(ob->tls_privatekey, FALSE)
+ ) )
+ {
+ uschar * pkey = ob->tls_privatekey;
+
+ DEBUG(D_tls)
+ debug_printf("TLS: preloading client certs for transport '%s'\n",t->name);
+
+ if ( tls_add_certfile(ctx, &tpt_dummy_state, ob->tls_certificate,
+ &dummy_errstr) == 0
+ && tls_add_pkeyfile(ctx, &tpt_dummy_state,
+ pkey ? pkey : ob->tls_certificate,
+ &dummy_errstr) == 0
+ )
+ ob->tls_preload.conn_certs = TRUE;
+ }
+ }
+else
+ DEBUG(D_tls)
+ debug_printf("TLS: not preloading client certs, for transport '%s'\n", t->name);
-X509_set_version(x509, 2); /* N+1 - version 3 */
-ASN1_INTEGER_set(X509_get_serialNumber(x509), 0);
-X509_gmtime_adj(X509_get_notBefore(x509), 0);
-X509_gmtime_adj(X509_get_notAfter(x509), (long)60 * 60); /* 1 hour */
-X509_set_pubkey(x509, pkey);
-name = X509_get_subject_name(x509);
-X509_NAME_add_entry_by_txt(name, "C",
- MBSTRING_ASC, CUS "UK", -1, -1, 0);
-X509_NAME_add_entry_by_txt(name, "O",
- MBSTRING_ASC, CUS "Exim Developers", -1, -1, 0);
-X509_NAME_add_entry_by_txt(name, "CN",
- MBSTRING_ASC, CUS smtp_active_hostname, -1, -1, 0);
-X509_set_issuer_name(x509, name);
+if ( opt_set_and_noexpand(ob->tls_verify_certificates)
+ && opt_unset_or_noexpand(ob->tls_crl))
+ {
+ if ( !watch
+ || tls_set_watch(CUS X509_get_default_cert_file(), FALSE)
+ && tls_set_watch(ob->tls_verify_certificates, FALSE)
+ && tls_set_watch(ob->tls_crl, FALSE)
+ )
+ {
+ DEBUG(D_tls)
+ debug_printf("TLS: preloading CA bundle for transport '%s'\n", t->name);
-where = US"signing cert";
-if (!X509_sign(x509, pkey, EVP_md5()))
- goto err;
+ if (setup_certs(ctx, ob->tls_verify_certificates,
+ ob->tls_crl, dummy_host, &dummy_errstr) == OK)
+ ob->tls_preload.cabundle = TRUE;
+ }
+ }
+else
+ DEBUG(D_tls)
+ debug_printf("TLS: not preloading CA bundle, for transport '%s'\n", t->name);
-where = US"installing selfsign cert";
-if (!SSL_CTX_use_certificate(sctx, x509))
- goto err;
+#endif /*EXIM_HAVE_INOTIFY*/
+}
-where = US"installing selfsign key";
-if (!SSL_CTX_use_PrivateKey(sctx, pkey))
- goto err;
-return OK;
+#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
+/* Invalidate the creds cached, by dropping the current ones.
+Call when we notice one of the source files has changed. */
+
+static void
+tls_server_creds_invalidate(void)
+{
+SSL_CTX_free(state_server.lib_state.lib_ctx);
+state_server.lib_state = null_tls_preload;
+}
-err:
- (void) tls_error(where, NULL, NULL, errstr);
- if (x509) X509_free(x509);
- if (pkey) EVP_PKEY_free(pkey);
- return DEFER;
+
+static void
+tls_client_creds_invalidate(transport_instance * t)
+{
+smtp_transport_options_block * ob = t->options_block;
+SSL_CTX_free(ob->tls_preload.lib_ctx);
+ob->tls_preload = null_tls_preload;
}
+#else
+
+static void
+tls_server_creds_invalidate(void)
+{ return; }
+static void
+tls_client_creds_invalidate(transport_instance * t)
+{ return; }
+#endif /*EXIM_HAVE_INOTIFY*/
-static int
-tls_add_certfile(SSL_CTX * sctx, tls_ext_ctx_cb * cbinfo, uschar * file,
- uschar ** errstr)
-{
-DEBUG(D_tls) debug_printf("tls_certificate file %s\n", file);
-if (!SSL_CTX_use_certificate_chain_file(sctx, CS file))
- return tls_error(string_sprintf(
- "SSL_CTX_use_certificate_chain_file file=%s", file),
- cbinfo->host, NULL, errstr);
-return 0;
-}
-static int
-tls_add_pkeyfile(SSL_CTX * sctx, tls_ext_ctx_cb * cbinfo, uschar * file,
- uschar ** errstr)
+/* Extreme debug
+#ifndef DISABLE_OCSP
+void
+x509_store_dump_cert_s_names(X509_STORE * store)
{
-DEBUG(D_tls) debug_printf("tls_privatekey file %s\n", file);
-if (!SSL_CTX_use_PrivateKey_file(sctx, CS file, SSL_FILETYPE_PEM))
- return tls_error(string_sprintf(
- "SSL_CTX_use_PrivateKey_file file=%s", file), cbinfo->host, NULL, errstr);
-return 0;
-}
+STACK_OF(X509_OBJECT) * roots= store->objs;
+static uschar name[256];
+for (int i= 0; i < sk_X509_OBJECT_num(roots); i++)
+ {
+ X509_OBJECT * tmp_obj= sk_X509_OBJECT_value(roots, i);
+ if(tmp_obj->type == X509_LU_X509)
+ {
+ X509_NAME * sn = X509_get_subject_name(tmp_obj->data.x509);
+ if (X509_NAME_oneline(sn, CS name, sizeof(name)))
+ {
+ name[sizeof(name)-1] = '\0';
+ debug_printf(" %s\n", name);
+ }
+ }
+ }
+}
+#endif
+*/
-/*************************************************
-* Expand key and cert file specs *
-*************************************************/
-/* Called once during tls_init and possibly again during TLS setup, for a
-new context, if Server Name Indication was used and tls_sni was seen in
-the certificate string.
+#ifndef DISABLE_TLS_RESUME
+/* Manage the keysets used for encrypting the session tickets, on the server. */
-Arguments:
- sctx the SSL_CTX* to update
- cbinfo various parts of session state
- errstr error string pointer
+typedef struct { /* Session ticket encryption key */
+ uschar name[16];
-Returns: OK/DEFER/FAIL
-*/
+ const EVP_CIPHER * aes_cipher;
+ uschar aes_key[32]; /* size needed depends on cipher. aes_128 implies 128/8 = 16? */
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+ const EVP_MD * hmac_hash;
+# else
+ const uschar * hmac_hashname;
+# endif
+ uschar hmac_key[16];
+ time_t renew;
+ time_t expire;
+} exim_stek;
-static int
-tls_expand_session_files(SSL_CTX *sctx, tls_ext_ctx_cb *cbinfo,
- uschar ** errstr)
+static exim_stek exim_tk; /* current key */
+static exim_stek exim_tk_old; /* previous key */
+
+static void
+tk_init(void)
{
-uschar *expanded;
+time_t t = time(NULL);
-if (!cbinfo->certificate)
+if (exim_tk.name[0])
{
- if (!cbinfo->is_server) /* client */
- return OK;
- /* server */
- if (tls_install_selfsign(sctx, errstr) != OK)
- return DEFER;
+ if (exim_tk.renew >= t) return;
+ exim_tk_old = exim_tk;
}
-else
- {
- int err;
- if (Ustrstr(cbinfo->certificate, US"tls_sni") ||
- Ustrstr(cbinfo->certificate, US"tls_in_sni") ||
- Ustrstr(cbinfo->certificate, US"tls_out_sni")
- )
- reexpand_tls_files_for_sni = TRUE;
+if (f.running_in_test_harness) ssl_session_timeout = 6;
- if (!expand_check(cbinfo->certificate, US"tls_certificate", &expanded, errstr))
- return DEFER;
+DEBUG(D_tls) debug_printf("OpenSSL: %s STEK\n", exim_tk.name[0] ? "rotating" : "creating");
+if (RAND_bytes(exim_tk.aes_key, sizeof(exim_tk.aes_key)) <= 0) return;
+if (RAND_bytes(exim_tk.hmac_key, sizeof(exim_tk.hmac_key)) <= 0) return;
+if (RAND_bytes(exim_tk.name+1, sizeof(exim_tk.name)-1) <= 0) return;
- if (expanded)
- if (cbinfo->is_server)
- {
- const uschar * file_list = expanded;
- int sep = 0;
- uschar * file;
+exim_tk.name[0] = 'E';
+exim_tk.aes_cipher = EVP_aes_256_cbc();
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+exim_tk.hmac_hash = EVP_sha256();
+# else
+exim_tk.hmac_hashname = US "sha256";
+# endif
+exim_tk.expire = t + ssl_session_timeout;
+exim_tk.renew = t + ssl_session_timeout/2;
+}
- while (file = string_nextinlist(&file_list, &sep, NULL, 0))
- if ((err = tls_add_certfile(sctx, cbinfo, file, errstr)))
- return err;
- }
- else /* would there ever be a need for multiple client certs? */
- if ((err = tls_add_certfile(sctx, cbinfo, expanded, errstr)))
- return err;
+static exim_stek *
+tk_current(void)
+{
+if (!exim_tk.name[0]) return NULL;
+return &exim_tk;
+}
- if (cbinfo->privatekey != NULL &&
- !expand_check(cbinfo->privatekey, US"tls_privatekey", &expanded, errstr))
- return DEFER;
+static exim_stek *
+tk_find(const uschar * name)
+{
+return memcmp(name, exim_tk.name, sizeof(exim_tk.name)) == 0 ? &exim_tk
+ : memcmp(name, exim_tk_old.name, sizeof(exim_tk_old.name)) == 0 ? &exim_tk_old
+ : NULL;
+}
- /* If expansion was forced to fail, key_expanded will be NULL. If the result
- of the expansion is an empty string, ignore it also, and assume the private
- key is in the same file as the certificate. */
- if (expanded && *expanded)
- if (cbinfo->is_server)
- {
- const uschar * file_list = expanded;
- int sep = 0;
- uschar * file;
+static int
+tk_hmac_init(
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+ HMAC_CTX * hctx,
+#else
+ EVP_MAC_CTX * hctx,
+#endif
+ exim_stek * key
+ )
+{
+/*XXX will want these dependent on the ssl session strength */
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+ HMAC_Init_ex(hctx, key->hmac_key, sizeof(key->hmac_key),
+ key->hmac_hash, NULL);
+#else
+ {
+ OSSL_PARAM params[3];
+ uschar * hk = string_copy(key->hmac_hashname); /* need nonconst */
+ params[0] = OSSL_PARAM_construct_octet_string("key", key->hmac_key, sizeof(key->hmac_key));
+ params[1] = OSSL_PARAM_construct_utf8_string("digest", CS hk, 0);
+ params[2] = OSSL_PARAM_construct_end();
+ if (EVP_MAC_CTX_set_params(hctx, params) == 0)
+ {
+ DEBUG(D_tls) debug_printf("EVP_MAC_CTX_set_params: %s\n",
+ ERR_reason_error_string(ERR_get_error()));
+ return 0; /* error in mac initialisation */
+ }
+}
+#endif
+return 1;
+}
- while (file = string_nextinlist(&file_list, &sep, NULL, 0))
- if ((err = tls_add_pkeyfile(sctx, cbinfo, file, errstr)))
- return err;
- }
- else /* would there ever be a need for multiple client certs? */
- if ((err = tls_add_pkeyfile(sctx, cbinfo, expanded, errstr)))
- return err;
- }
+/* Callback for session tickets, on server */
+static int
+ticket_key_callback(SSL * ssl, uschar key_name[16],
+ uschar * iv, EVP_CIPHER_CTX * c_ctx,
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+ HMAC_CTX * hctx,
+#else
+ EVP_MAC_CTX * hctx,
+#endif
+ int enc)
+{
+tls_support * tlsp = state_server.tlsp;
+exim_stek * key;
-#ifndef DISABLE_OCSP
-if (cbinfo->is_server && cbinfo->u_ocsp.server.file)
+if (enc)
{
- /*XXX stack*/
- if (!expand_check(cbinfo->u_ocsp.server.file, US"tls_ocsp_file", &expanded, errstr))
- return DEFER;
+ DEBUG(D_tls) debug_printf("ticket_key_callback: create new session\n");
+ tlsp->resumption |= RESUME_CLIENT_REQUESTED;
- if (expanded && *expanded)
+ if (RAND_bytes(iv, EVP_MAX_IV_LENGTH) <= 0)
+ return -1; /* insufficient random */
+
+ if (!(key = tk_current())) /* current key doesn't exist or isn't valid */
+ return 0; /* key couldn't be created */
+ memcpy(key_name, key->name, 16);
+ DEBUG(D_tls) debug_printf("STEK expire " TIME_T_FMT "\n", key->expire - time(NULL));
+
+ if (tk_hmac_init(hctx, key) == 0) return 0;
+ EVP_EncryptInit_ex(c_ctx, key->aes_cipher, NULL, key->aes_key, iv);
+
+ DEBUG(D_tls) debug_printf("ticket created\n");
+ return 1;
+ }
+else
+ {
+ time_t now = time(NULL);
+
+ DEBUG(D_tls) debug_printf("ticket_key_callback: retrieve session\n");
+ tlsp->resumption |= RESUME_CLIENT_SUGGESTED;
+
+ if (!(key = tk_find(key_name)) || key->expire < now)
{
- DEBUG(D_tls) debug_printf("tls_ocsp_file %s\n", expanded);
- if ( cbinfo->u_ocsp.server.file_expanded
- && (Ustrcmp(expanded, cbinfo->u_ocsp.server.file_expanded) == 0))
+ DEBUG(D_tls)
{
- DEBUG(D_tls) debug_printf(" - value unchanged, using existing values\n");
+ debug_printf("ticket not usable (%s)\n", key ? "expired" : "not found");
+ if (key) debug_printf("STEK expire " TIME_T_FMT "\n", key->expire - now);
}
- else
- ocsp_load_response(sctx, cbinfo, expanded);
+ return 0;
}
- }
-#endif
-return OK;
+ if (tk_hmac_init(hctx, key) == 0) return 0;
+ EVP_DecryptInit_ex(c_ctx, key->aes_cipher, NULL, key->aes_key, iv);
+
+ DEBUG(D_tls) debug_printf("ticket usable, STEK expire " TIME_T_FMT "\n", key->expire - now);
+
+ /* The ticket lifetime and renewal are the same as the STEK lifetime and
+ renewal, which is overenthusiastic. A factor of, say, 3x longer STEK would
+ be better. To do that we'd have to encode ticket lifetime in the name as
+ we don't yet see the restored session. Could check posthandshake for TLS1.3
+ and trigger a new ticket then, but cannot do that for TLS1.2 */
+ return key->renew < now ? 2 : 1;
+ }
}
+#endif /* !DISABLE_TLS_RESUME */
+
+
+static void
+setup_cert_verify(SSL_CTX * ctx, BOOL optional,
+ int (*cert_vfy_cb)(int, X509_STORE_CTX *))
+{
+/* If verification is optional, don't fail if no certificate */
+SSL_CTX_set_verify(ctx,
+ SSL_VERIFY_PEER | (optional ? 0 : SSL_VERIFY_FAIL_IF_NO_PEER_CERT),
+ cert_vfy_cb);
+}
/*************************************************
arg Callback of "our" registered data
Returns: SSL_TLSEXT_ERR_{OK,ALERT_WARNING,ALERT_FATAL,NOACK}
+
+XXX might need to change to using ClientHello callback,
+per https://www.openssl.org/docs/manmaster/man3/SSL_client_hello_cb_fn.html
*/
#ifdef EXIM_HAVE_OPENSSL_TLSEXT
tls_servername_cb(SSL *s, int *ad ARG_UNUSED, void *arg)
{
const char *servername = SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
-tls_ext_ctx_cb *cbinfo = (tls_ext_ctx_cb *) arg;
+exim_openssl_state_st *state = (exim_openssl_state_st *) arg;
int rc;
int old_pool = store_pool;
uschar * dummy_errstr;
/* Make the extension value available for expansion */
store_pool = POOL_PERM;
-tls_in.sni = string_copy(US servername);
+tls_in.sni = string_copy_taint(US servername, TRUE);
store_pool = old_pool;
if (!reexpand_tls_files_for_sni)
not confident that memcpy wouldn't break some internal reference counting.
Especially since there's a references struct member, which would be off. */
-if (!(server_sni = SSL_CTX_new(SSLv23_server_method())))
- {
- ERR_error_string(ERR_get_error(), ssl_errstring);
- DEBUG(D_tls) debug_printf("SSL_CTX_new() failed: %s\n", ssl_errstring);
- return SSL_TLSEXT_ERR_NOACK;
- }
+if (lib_ctx_new(&server_sni, NULL, &dummy_errstr) != OK)
+ goto bad;
/* Not sure how many of these are actually needed, since SSL object
already exists. Might even need this selfsame callback, for reneg? */
-SSL_CTX_set_info_callback(server_sni, SSL_CTX_get_info_callback(server_ctx));
-SSL_CTX_set_mode(server_sni, SSL_CTX_get_mode(server_ctx));
-SSL_CTX_set_options(server_sni, SSL_CTX_get_options(server_ctx));
-SSL_CTX_set_timeout(server_sni, SSL_CTX_get_timeout(server_ctx));
-SSL_CTX_set_tlsext_servername_callback(server_sni, tls_servername_cb);
-SSL_CTX_set_tlsext_servername_arg(server_sni, cbinfo);
+ {
+ SSL_CTX * ctx = state_server.lib_state.lib_ctx;
+ SSL_CTX_set_info_callback(server_sni, SSL_CTX_get_info_callback(ctx));
+ SSL_CTX_set_mode(server_sni, SSL_CTX_get_mode(ctx));
+ SSL_CTX_set_options(server_sni, SSL_CTX_get_options(ctx));
+ SSL_CTX_set_timeout(server_sni, SSL_CTX_get_timeout(ctx));
+ SSL_CTX_set_tlsext_servername_callback(server_sni, tls_servername_cb);
+ SSL_CTX_set_tlsext_servername_arg(server_sni, state);
+ }
-if ( !init_dh(server_sni, cbinfo->dhparam, NULL, &dummy_errstr)
- || !init_ecdh(server_sni, NULL, &dummy_errstr)
+if ( !init_dh(server_sni, state->dhparam, &dummy_errstr)
+ || !init_ecdh(server_sni, &dummy_errstr)
)
- return SSL_TLSEXT_ERR_NOACK;
+ goto bad;
+
+if ( state->server_cipher_list
+ && !SSL_CTX_set_cipher_list(server_sni, CS state->server_cipher_list))
+ goto bad;
-if (cbinfo->server_cipher_list)
- SSL_CTX_set_cipher_list(server_sni, CS cbinfo->server_cipher_list);
#ifndef DISABLE_OCSP
-if (cbinfo->u_ocsp.server.file)
+if (state->u_ocsp.server.file)
{
SSL_CTX_set_tlsext_status_cb(server_sni, tls_server_stapling_cb);
- SSL_CTX_set_tlsext_status_arg(server_sni, cbinfo);
+ SSL_CTX_set_tlsext_status_arg(server_sni, state);
}
#endif
-if ((rc = setup_certs(server_sni, tls_verify_certificates, tls_crl, NULL, FALSE,
- verify_callback_server, &dummy_errstr)) != OK)
- return SSL_TLSEXT_ERR_NOACK;
+ {
+ uschar * expcerts;
+ if ( !expand_check(tls_verify_certificates, US"tls_verify_certificates",
+ &expcerts, &dummy_errstr)
+ || (rc = setup_certs(server_sni, expcerts, tls_crl, NULL,
+ &dummy_errstr)) != OK)
+ goto bad;
+
+ if (expcerts && *expcerts)
+ setup_cert_verify(server_sni, FALSE, verify_callback_server);
+ }
/* do this after setup_certs, because this can require the certs for verifying
OCSP information. */
-if ((rc = tls_expand_session_files(server_sni, cbinfo, &dummy_errstr)) != OK)
- return SSL_TLSEXT_ERR_NOACK;
+if ((rc = tls_expand_session_files(server_sni, state, &dummy_errstr)) != OK)
+ goto bad;
DEBUG(D_tls) debug_printf("Switching SSL context.\n");
SSL_set_SSL_CTX(s, server_sni);
-
return SSL_TLSEXT_ERR_OK;
+
+bad: return SSL_TLSEXT_ERR_ALERT_FATAL;
}
#endif /* EXIM_HAVE_OPENSSL_TLSEXT */
+#ifdef EXIM_HAVE_ALPN
+/*************************************************
+* Callback to handle ALPN *
+*************************************************/
+
+/* Called on server if tls_alpn nonblank after expansion,
+when client offers ALPN, after the SNI callback.
+If set and not matching the list then we dump the connection */
+
+static int
+tls_server_alpn_cb(SSL *ssl, const uschar ** out, uschar * outlen,
+ const uschar * in, unsigned int inlen, void * arg)
+{
+server_seen_alpn = TRUE;
+DEBUG(D_tls)
+ {
+ debug_printf("Received TLS ALPN offer:");
+ for (int pos = 0, siz; pos < inlen; pos += siz+1)
+ {
+ siz = in[pos];
+ if (pos + 1 + siz > inlen) siz = inlen - pos - 1;
+ debug_printf(" '%.*s'", siz, in + pos + 1);
+ }
+ debug_printf(". Our list: '%s'\n", tls_alpn);
+ }
+
+/* Look for an acceptable ALPN */
+
+if ( inlen > 1 /* at least one name */
+ && in[0]+1 == inlen /* filling the vector, so exactly one name */
+ )
+ {
+ const uschar * list = tls_alpn;
+ int sep = 0;
+ for (uschar * name; name = string_nextinlist(&list, &sep, NULL, 0); )
+ if (Ustrncmp(in+1, name, in[0]) == 0)
+ {
+ *out = in+1; /* we checked for exactly one, so can just point to it */
+ *outlen = inlen;
+ return SSL_TLSEXT_ERR_OK; /* use ALPN */
+ }
+ }
+
+/* More than one name from clilent, or name did not match our list. */
+
+/* This will be fatal to the TLS conn; would be nice to kill TCP also.
+Maybe as an option in future; for now leave control to the config (must-tls). */
+
+DEBUG(D_tls) debug_printf("TLS ALPN rejected\n");
+return SSL_TLSEXT_ERR_ALERT_FATAL;
+}
+#endif /* EXIM_HAVE_ALPN */
+
+
+
#ifndef DISABLE_OCSP
/*************************************************
static int
tls_server_stapling_cb(SSL *s, void *arg)
{
-const tls_ext_ctx_cb *cbinfo = (tls_ext_ctx_cb *) arg;
-uschar *response_der; /*XXX blob */
+const exim_openssl_state_st * state = arg;
+ocsp_resplist * olist = state->u_ocsp.server.olist;
+uschar * response_der; /*XXX blob */
int response_der_len;
-/*XXX stack: use SSL_get_certificate() to see which cert; from that work
-out which ocsp blob to send. Unfortunately, SSL_get_certificate is known
-buggy in current OpenSSL; it returns the last cert loaded always rather than
-the one actually presented. So we can't support a stack of OCSP proofs at
-this time. */
-
DEBUG(D_tls)
- debug_printf("Received TLS status request (OCSP stapling); %s response\n",
- cbinfo->u_ocsp.server.response ? "have" : "lack");
+ debug_printf("Received TLS status request (OCSP stapling); %s response list\n",
+ olist ? "have" : "lack");
tls_in.ocsp = OCSP_NOT_RESP;
-if (!cbinfo->u_ocsp.server.response)
+if (!olist)
return SSL_TLSEXT_ERR_NOACK;
+#ifdef EXIM_HAVE_OPESSL_GET0_SERIAL
+ {
+ const X509 * cert_sent = SSL_get_certificate(s);
+ const ASN1_INTEGER * cert_serial = X509_get0_serialNumber(cert_sent);
+ const BIGNUM * cert_bn = ASN1_INTEGER_to_BN(cert_serial, NULL);
+
+ for (; olist; olist = olist->next)
+ {
+ OCSP_BASICRESP * bs = OCSP_response_get1_basic(olist->resp);
+ const OCSP_SINGLERESP * single = OCSP_resp_get0(bs, 0);
+ const OCSP_CERTID * cid = OCSP_SINGLERESP_get0_id(single);
+ ASN1_INTEGER * res_cert_serial;
+ const BIGNUM * resp_bn;
+ ASN1_OCTET_STRING * res_cert_iNameHash;
+
+
+ (void) OCSP_id_get0_info(&res_cert_iNameHash, NULL, NULL, &res_cert_serial,
+ (OCSP_CERTID *) cid);
+ resp_bn = ASN1_INTEGER_to_BN(res_cert_serial, NULL);
+
+ DEBUG(D_tls)
+ {
+ debug_printf("cert serial: %s\n", BN_bn2hex(cert_bn));
+ debug_printf("resp serial: %s\n", BN_bn2hex(resp_bn));
+ }
+
+ if (BN_cmp(cert_bn, resp_bn) == 0)
+ {
+ DEBUG(D_tls) debug_printf("matched serial for ocsp\n");
+
+ /*XXX TODO: check the rest of the list for duplicate matches.
+ If any, need to also check the Issuer Name hash.
+ Without this, we will provide the wrong status in the case of
+ duplicate id. */
+
+ break;
+ }
+ DEBUG(D_tls) debug_printf("not match serial for ocsp\n");
+ }
+ if (!olist)
+ {
+ DEBUG(D_tls) debug_printf("failed to find match for ocsp\n");
+ return SSL_TLSEXT_ERR_NOACK;
+ }
+ }
+#else
+if (olist->next)
+ {
+ DEBUG(D_tls) debug_printf("OpenSSL version too early to support multi-leaf OCSP\n");
+ return SSL_TLSEXT_ERR_NOACK;
+ }
+#endif
+
+/*XXX could we do the i2d earlier, rather than during the callback? */
response_der = NULL;
-response_der_len = i2d_OCSP_RESPONSE(cbinfo->u_ocsp.server.response, /*XXX stack*/
- &response_der);
+response_der_len = i2d_OCSP_RESPONSE(olist->resp, &response_der);
if (response_der_len <= 0)
return SSL_TLSEXT_ERR_NOACK;
-SSL_set_tlsext_status_ocsp_resp(server_ssl, response_der, response_der_len);
+SSL_set_tlsext_status_ocsp_resp(state_server.lib_state.lib_ssl,
+ response_der, response_der_len);
tls_in.ocsp = OCSP_VFIED;
return SSL_TLSEXT_ERR_OK;
}
static int
tls_client_stapling_cb(SSL *s, void *arg)
{
-tls_ext_ctx_cb * cbinfo = arg;
+exim_openssl_state_st * cbinfo = arg;
const unsigned char * p;
int len;
OCSP_RESPONSE * rsp;
OCSP_BASICRESP * bs;
int i;
-DEBUG(D_tls) debug_printf("Received TLS status response (OCSP stapling):");
+DEBUG(D_tls) debug_printf("Received TLS status callback (OCSP stapling):\n");
len = SSL_get_tlsext_status_ocsp_resp(s, &p);
if(!p)
{
/* Expect this when we requested ocsp but got none */
if (cbinfo->u_ocsp.client.verify_required && LOGGING(tls_cipher))
- log_write(0, LOG_MAIN, "Received TLS status callback, null content");
+ log_write(0, LOG_MAIN, "Required TLS certificate status not received");
else
DEBUG(D_tls) debug_printf(" null\n");
return cbinfo->u_ocsp.client.verify_required ? 0 : 1;
}
-if(!(rsp = d2i_OCSP_RESPONSE(NULL, &p, len)))
- {
- tls_out.ocsp = OCSP_FAILED;
+if (!(rsp = d2i_OCSP_RESPONSE(NULL, &p, len)))
+ {
+ tls_out.ocsp = OCSP_FAILED; /*XXX should use tlsp-> to permit concurrent outbound */
if (LOGGING(tls_cipher))
log_write(0, LOG_MAIN, "Received TLS cert status response, parse error");
else
DEBUG(D_tls) debug_printf(" parse error\n");
return 0;
- }
+ }
-if(!(bs = OCSP_response_get1_basic(rsp)))
+if (!(bs = OCSP_response_get1_basic(rsp)))
{
tls_out.ocsp = OCSP_FAILED;
if (LOGGING(tls_cipher))
*/
{
BIO * bp = NULL;
- int status, reason;
- ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd;
+#ifndef EXIM_HAVE_OCSP_RESP_COUNT
+ STACK_OF(OCSP_SINGLERESP) * sresp = bs->tbsResponseData->responses;
+#endif
- DEBUG(D_tls) bp = BIO_new_fp(debug_file, BIO_NOCLOSE);
+ DEBUG(D_tls) bp = BIO_new(BIO_s_mem());
/*OCSP_RESPONSE_print(bp, rsp, 0); extreme debug: stapling content */
/* DEBUG(D_tls) x509_store_dump_cert_s_names(cbinfo->u_ocsp.client.verify_store); */
if ((i = OCSP_basic_verify(bs, cbinfo->verify_stack,
- cbinfo->u_ocsp.client.verify_store, 0)) <= 0)
- {
- tls_out.ocsp = OCSP_FAILED;
- if (LOGGING(tls_cipher)) log_write(0, LOG_MAIN,
- "Received TLS cert status response, itself unverifiable: %s",
- ERR_reason_error_string(ERR_peek_error()));
- BIO_printf(bp, "OCSP response verify failure\n");
- ERR_print_errors(bp);
- OCSP_RESPONSE_print(bp, rsp, 0);
- goto failed;
- }
+ cbinfo->u_ocsp.client.verify_store, OCSP_NOEXPLICIT)) <= 0)
+ if (ERR_peek_error())
+ {
+ tls_out.ocsp = OCSP_FAILED;
+ if (LOGGING(tls_cipher)) log_write(0, LOG_MAIN,
+ "Received TLS cert status response, itself unverifiable: %s",
+ ERR_reason_error_string(ERR_peek_error()));
+ DEBUG(D_tls)
+ {
+ BIO_printf(bp, "OCSP response verify failure\n");
+ ERR_print_errors(bp);
+ OCSP_RESPONSE_print(bp, rsp, 0);
+ }
+ goto failed;
+ }
+ else
+ DEBUG(D_tls) debug_printf("no explicit trust for OCSP signing"
+ " in the root CA certificate; ignoring\n");
- BIO_printf(bp, "OCSP response well-formed and signed OK\n");
+ DEBUG(D_tls) debug_printf("OCSP response well-formed and signed OK\n");
/*XXX So we have a good stapled OCSP status. How do we know
it is for the cert of interest? OpenSSL 1.1.0 has a routine
For now, carry on blindly accepting the resp. */
- {
- OCSP_SINGLERESP * single;
-
+ for (int idx =
#ifdef EXIM_HAVE_OCSP_RESP_COUNT
- if (OCSP_resp_count(bs) != 1)
+ OCSP_resp_count(bs) - 1;
#else
- STACK_OF(OCSP_SINGLERESP) * sresp = bs->tbsResponseData->responses;
- if (sk_OCSP_SINGLERESP_num(sresp) != 1)
+ sk_OCSP_SINGLERESP_num(sresp) - 1;
#endif
- {
- tls_out.ocsp = OCSP_FAILED;
- log_write(0, LOG_MAIN, "OCSP stapling "
- "with multiple responses not handled");
- goto failed;
- }
- single = OCSP_resp_get0(bs, 0);
+ idx >= 0; idx--)
+ {
+ OCSP_SINGLERESP * single = OCSP_resp_get0(bs, idx);
+ int status, reason;
+ ASN1_GENERALIZEDTIME * rev, * thisupd, * nextupd;
+
+ /*XXX so I can see putting a loop in here to handle a rsp with >1 singleresp
+ - but what happens with a GnuTLS-style input?
+
+ we could do with a debug label for each singleresp
+ - it has a certID with a serialNumber, but I see no API to get that
+ */
status = OCSP_single_get0_status(single, &reason, &rev,
&thisupd, &nextupd);
- }
- DEBUG(D_tls) time_print(bp, "This OCSP Update", thisupd);
- DEBUG(D_tls) if(nextupd) time_print(bp, "Next OCSP Update", nextupd);
- if (!OCSP_check_validity(thisupd, nextupd,
- EXIM_OCSP_SKEW_SECONDS, EXIM_OCSP_MAX_AGE))
- {
- tls_out.ocsp = OCSP_FAILED;
- DEBUG(D_tls) ERR_print_errors(bp);
- log_write(0, LOG_MAIN, "Server OSCP dates invalid");
- }
- else
- {
+ DEBUG(D_tls)
+ {
+ time_print(bp, "This OCSP Update", thisupd);
+ if (nextupd) time_print(bp, "Next OCSP Update", nextupd);
+ }
+ if (!OCSP_check_validity(thisupd, nextupd,
+ EXIM_OCSP_SKEW_SECONDS, EXIM_OCSP_MAX_AGE))
+ {
+ tls_out.ocsp = OCSP_FAILED;
+ DEBUG(D_tls) ERR_print_errors(bp);
+ log_write(0, LOG_MAIN, "OCSP dates invalid");
+ goto failed;
+ }
+
DEBUG(D_tls) BIO_printf(bp, "Certificate status: %s\n",
OCSP_cert_status_str(status));
switch(status)
{
case V_OCSP_CERTSTATUS_GOOD:
- tls_out.ocsp = OCSP_VFIED;
- i = 1;
- goto good;
+ continue; /* the idx loop */
case V_OCSP_CERTSTATUS_REVOKED:
- tls_out.ocsp = OCSP_FAILED;
log_write(0, LOG_MAIN, "Server certificate revoked%s%s",
reason != -1 ? "; reason: " : "",
reason != -1 ? OCSP_crl_reason_str(reason) : "");
DEBUG(D_tls) time_print(bp, "Revocation Time", rev);
break;
default:
- tls_out.ocsp = OCSP_FAILED;
log_write(0, LOG_MAIN,
"Server certificate status unknown, in OCSP stapling");
break;
}
+
+ goto failed;
}
+
+ i = 1;
+ tls_out.ocsp = OCSP_VFIED;
+ goto good;
+
failed:
+ tls_out.ocsp = OCSP_FAILED;
i = cbinfo->u_ocsp.client.verify_required ? 0 : 1;
good:
+ {
+ uschar * s = NULL;
+ int len = (int) BIO_get_mem_data(bp, CSS &s);
+ if (len > 0) debug_printf("%.*s", len, s);
+ }
BIO_free(bp);
}
/*************************************************
* Initialize for TLS *
*************************************************/
-
/* Called from both server and client code, to do preliminary initialization
of the library. We allocate and return a context structure.
Arguments:
- ctxp returned SSL context
host connected host, if client; NULL if server
- dhparam DH parameter file
- certificate certificate file
- privatekey private key
+ ob transport options block, if client; NULL if server
ocsp_file file of stapling info (server); flag for require ocsp (client)
addr address if client; NULL if server (for some randomness)
- cbp place to put allocated callback context
+ caller_state place to put pointer to allocated state-struct
errstr error string pointer
Returns: OK/DEFER/FAIL
*/
static int
-tls_init(SSL_CTX **ctxp, host_item *host, uschar *dhparam, uschar *certificate,
- uschar *privatekey,
+tls_init(host_item * host, smtp_transport_options_block * ob,
#ifndef DISABLE_OCSP
- uschar *ocsp_file, /*XXX stack, in server*/
+ uschar *ocsp_file,
#endif
- address_item *addr, tls_ext_ctx_cb ** cbp, uschar ** errstr)
+ address_item *addr, exim_openssl_state_st ** caller_state,
+ tls_support * tlsp,
+ uschar ** errstr)
{
SSL_CTX * ctx;
-long init_options;
+exim_openssl_state_st * state;
int rc;
-tls_ext_ctx_cb * cbinfo;
-cbinfo = store_malloc(sizeof(tls_ext_ctx_cb));
-cbinfo->certificate = certificate;
-cbinfo->privatekey = privatekey;
-cbinfo->is_server = host==NULL;
-#ifndef DISABLE_OCSP
-cbinfo->verify_stack = NULL;
-if (!host)
+if (host) /* client */
{
- cbinfo->u_ocsp.server.file = ocsp_file;
- cbinfo->u_ocsp.server.file_expanded = NULL;
- cbinfo->u_ocsp.server.response = NULL;
+ state = store_malloc(sizeof(exim_openssl_state_st));
+ memset(state, 0, sizeof(*state));
+ state->certificate = ob->tls_certificate;
+ state->privatekey = ob->tls_privatekey;
+ state->is_server = FALSE;
+ state->dhparam = NULL;
+ state->lib_state = ob->tls_preload;
+ }
+else /* server */
+ {
+ state = &state_server;
+ state->certificate = tls_certificate;
+ state->privatekey = tls_privatekey;
+ state->is_server = TRUE;
+ state->dhparam = tls_dhparam;
+ state->lib_state = state_server.lib_state;
}
-else
- cbinfo->u_ocsp.client.verify_store = NULL;
-#endif
-cbinfo->dhparam = dhparam;
-cbinfo->server_cipher_list = NULL;
-cbinfo->host = host;
-#ifndef DISABLE_EVENT
-cbinfo->event_action = NULL;
-#endif
-SSL_load_error_strings(); /* basic set up */
-OpenSSL_add_ssl_algorithms();
+state->tlsp = tlsp;
+state->host = host;
-#ifdef EXIM_HAVE_SHA256
-/* SHA256 is becoming ever more popular. This makes sure it gets added to the
-list of available digests. */
-EVP_add_digest(EVP_sha256());
-#endif
+if (!state->lib_state.pri_string)
+ state->server_cipher_list = NULL;
-/* Create a context.
-The OpenSSL docs in 1.0.1b have not been updated to clarify TLS variant
-negotiation in the different methods; as far as I can tell, the only
-*_{server,client}_method which allows negotiation is SSLv23, which exists even
-when OpenSSL is built without SSLv2 support.
-By disabling with openssl_options, we can let admins re-enable with the
-existing knob. */
+#ifndef DISABLE_EVENT
+state->event_action = NULL;
+#endif
-if (!(ctx = SSL_CTX_new(host ? SSLv23_client_method() : SSLv23_server_method())))
- return tls_error(US"SSL_CTX_new", host, NULL, errstr);
+tls_openssl_init();
/* It turns out that we need to seed the random number generator this early in
order to get the full complement of ciphers to work. It took me roughly a day
On systems that have /dev/urandom, SSL may automatically seed itself from
there. Otherwise, we have to make something up as best we can. Double check
-afterwards. */
-
-if (!RAND_status())
- {
- randstuff r;
- gettimeofday(&r.tv, NULL);
- r.p = getpid();
-
- RAND_seed(US (&r), sizeof(r));
- RAND_seed(US big_buffer, big_buffer_size);
- if (addr != NULL) RAND_seed(US addr, sizeof(addr));
-
- if (!RAND_status())
- return tls_error(US"RAND_status", host,
- US"unable to seed random number generator", errstr);
- }
-
-/* Set up the information callback, which outputs if debugging is at a suitable
-level. */
+afterwards.
-DEBUG(D_tls) SSL_CTX_set_info_callback(ctx, (void (*)())info_callback);
+Although we likely called this before, at daemon startup, this is a chance
+to mix in further variable info (time, pid) if needed. */
-/* Automatically re-try reads/writes after renegotiation. */
-(void) SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
+if (!lib_rand_init(addr))
+ return tls_error(US"RAND_status", host,
+ US"unable to seed random number generator", errstr);
/* Apply administrator-supplied work-arounds.
Historically we applied just one requested option,
No OpenSSL version number checks: the options we accept depend upon the
availability of the option value macros from OpenSSL. */
-if (!tls_openssl_options_parse(openssl_options, &init_options))
- return tls_error(US"openssl_options parsing failed", host, NULL, errstr);
+if (!init_options)
+ if (!tls_openssl_options_parse(openssl_options, &init_options))
+ return tls_error(US"openssl_options parsing failed", host, NULL, errstr);
+
+/* Create a context.
+The OpenSSL docs in 1.0.1b have not been updated to clarify TLS variant
+negotiation in the different methods; as far as I can tell, the only
+*_{server,client}_method which allows negotiation is SSLv23, which exists even
+when OpenSSL is built without SSLv2 support.
+By disabling with openssl_options, we can let admins re-enable with the
+existing knob. */
+
+if (!(ctx = state->lib_state.lib_ctx))
+ {
+ if ((rc = lib_ctx_new(&ctx, host, errstr)) != OK)
+ return rc;
+ state->lib_state.lib_ctx = ctx;
+ }
+#ifndef DISABLE_TLS_RESUME
+tlsp->resumption = RESUME_SUPPORTED;
+#endif
if (init_options)
{
+#ifndef DISABLE_TLS_RESUME
+ /* Should the server offer session resumption? */
+ if (!host && verify_check_host(&tls_resumption_hosts) == OK)
+ {
+ DEBUG(D_tls) debug_printf("tls_resumption_hosts overrides openssl_options\n");
+ init_options &= ~SSL_OP_NO_TICKET;
+ tlsp->resumption |= RESUME_SERVER_TICKET; /* server will give ticket on request */
+ tlsp->host_resumable = TRUE;
+ }
+#endif
+
DEBUG(D_tls) debug_printf("setting SSL CTX options: %#lx\n", init_options);
if (!(SSL_CTX_set_options(ctx, init_options)))
return tls_error(string_sprintf(
else
DEBUG(D_tls) debug_printf("no SSL CTX options to set\n");
-/* Disable session cache unconditionally */
-
+/* We'd like to disable session cache unconditionally, but foolish Outlook
+Express clients then give up the first TLS connection and make a second one
+(which works). Only when there is an IMAP service on the same machine.
+Presumably OE is trying to use the cache for A on B. Leave it enabled for
+now, until we work out a decent way of presenting control to the config. It
+will never be used because we use a new context every time. */
+#ifdef notdef
(void) SSL_CTX_set_session_cache_mode(ctx, SSL_SESS_CACHE_OFF);
+#endif
/* Initialize with DH parameters if supplied */
/* Initialize ECDH temp key parameter selection */
-if ( !init_dh(ctx, dhparam, host, errstr)
- || !init_ecdh(ctx, host, errstr)
- )
- return DEFER;
+if (!host)
+ {
+ if (state->lib_state.dh)
+ { DEBUG(D_tls) debug_printf("TLS: DH params were preloaded\n"); }
+ else
+ if (!init_dh(ctx, state->dhparam, errstr)) return DEFER;
+
+ if (state->lib_state.ecdh)
+ { DEBUG(D_tls) debug_printf("TLS: ECDH curve was preloaded\n"); }
+ else
+ if (!init_ecdh(ctx, errstr)) return DEFER;
+ }
/* Set up certificate and key (and perhaps OCSP info) */
-if ((rc = tls_expand_session_files(ctx, cbinfo, errstr)) != OK)
- return rc;
+if (state->lib_state.conn_certs)
+ {
+ DEBUG(D_tls)
+ debug_printf("TLS: %s certs were preloaded\n", host ? "client":"server");
+ }
+else
+ {
+#ifndef DISABLE_OCSP
+ if (!host)
+ {
+ state->u_ocsp.server.file = ocsp_file;
+ state->u_ocsp.server.file_expanded = NULL;
+ state->u_ocsp.server.olist = NULL;
+ }
+#endif
+ if ((rc = tls_expand_session_files(ctx, state, errstr)) != OK) return rc;
+ }
/* If we need to handle SNI or OCSP, do so */
#ifdef EXIM_HAVE_OPENSSL_TLSEXT
# ifndef DISABLE_OCSP
- if (!(cbinfo->verify_stack = sk_X509_new_null()))
+ if (!(state->verify_stack = sk_X509_new_null()))
{
DEBUG(D_tls) debug_printf("failed to create stack for stapling verify\n");
return FAIL;
}
# endif
-if (host == NULL) /* server */
+if (!host) /* server */
{
# ifndef DISABLE_OCSP
- /* We check u_ocsp.server.file, not server.response, because we care about if
+ /* We check u_ocsp.server.file, not server.olist, because we care about if
the option exists, not what the current expansion might be, as SNI might
change the certificate and OCSP file in use between now and the time the
callback is invoked. */
- if (cbinfo->u_ocsp.server.file)
+ if (state->u_ocsp.server.file)
{
SSL_CTX_set_tlsext_status_cb(ctx, tls_server_stapling_cb);
- SSL_CTX_set_tlsext_status_arg(ctx, cbinfo);
+ SSL_CTX_set_tlsext_status_arg(ctx, state);
}
# endif
/* We always do this, so that $tls_sni is available even if not used in
tls_certificate */
SSL_CTX_set_tlsext_servername_callback(ctx, tls_servername_cb);
- SSL_CTX_set_tlsext_servername_arg(ctx, cbinfo);
+ SSL_CTX_set_tlsext_servername_arg(ctx, state);
+
+# ifdef EXIM_HAVE_ALPN
+ if (tls_alpn && *tls_alpn)
+ {
+ uschar * exp_alpn;
+ if ( expand_check(tls_alpn, US"tls_alpn", &exp_alpn, errstr)
+ && *exp_alpn && !isblank(*exp_alpn))
+ {
+ tls_alpn = exp_alpn; /* subprocess so ok to overwrite */
+ SSL_CTX_set_alpn_select_cb(ctx, tls_server_alpn_cb, state);
+ }
+ else
+ tls_alpn = NULL;
+ }
+# endif
}
# ifndef DISABLE_OCSP
else /* client */
if(ocsp_file) /* wanting stapling */
{
- if (!(cbinfo->u_ocsp.client.verify_store = X509_STORE_new()))
+ if (!(state->u_ocsp.client.verify_store = X509_STORE_new()))
{
DEBUG(D_tls) debug_printf("failed to create store for stapling verify\n");
return FAIL;
}
SSL_CTX_set_tlsext_status_cb(ctx, tls_client_stapling_cb);
- SSL_CTX_set_tlsext_status_arg(ctx, cbinfo);
+ SSL_CTX_set_tlsext_status_arg(ctx, state);
}
# endif
#endif
-cbinfo->verify_cert_hostnames = NULL;
+state->verify_cert_hostnames = NULL;
#ifdef EXIM_HAVE_EPHEM_RSA_KEX
/* Set up the RSA callback */
SSL_CTX_set_tmp_rsa_callback(ctx, rsa_callback);
#endif
-/* Finally, set the timeout, and we are done */
+/* Finally, set the session cache timeout, and we are done.
+The period appears to be also used for (server-generated) session tickets */
SSL_CTX_set_timeout(ctx, ssl_session_timeout);
DEBUG(D_tls) debug_printf("Initialized TLS\n");
-*cbp = cbinfo;
-*ctxp = ctx;
+*caller_state = state;
return OK;
}
/*
Argument: pointer to an SSL structure for the connection
- buffer to use for answer
- size of buffer
pointer to number of bits for cipher
-Returns: nothing
+Returns: pointer to allocated string in perm-pool
*/
-static void
-construct_cipher_name(SSL *ssl, uschar *cipherbuf, int bsize, int *bits)
+static uschar *
+construct_cipher_name(SSL * ssl, const uschar * ver, int * bits)
{
-/* With OpenSSL 1.0.0a, this needs to be const but the documentation doesn't
+int pool = store_pool;
+/* With OpenSSL 1.0.0a, 'c' needs to be const but the documentation doesn't
yet reflect that. It should be a safe change anyway, even 0.9.8 versions have
the accessor functions use const in the prototype. */
-const SSL_CIPHER *c;
-const uschar *ver;
-ver = (const uschar *)SSL_get_version(ssl);
+const SSL_CIPHER * c = (const SSL_CIPHER *) SSL_get_current_cipher(ssl);
+uschar * s;
-c = (const SSL_CIPHER *) SSL_get_current_cipher(ssl);
SSL_CIPHER_get_bits(c, bits);
-string_format(cipherbuf, bsize, "%s:%s:%u", ver,
- SSL_CIPHER_get_name(c), *bits);
+store_pool = POOL_PERM;
+s = string_sprintf("%s:%s:%u", ver, SSL_CIPHER_get_name(c), *bits);
+store_pool = pool;
+DEBUG(D_tls) debug_printf("Cipher: %s\n", s);
+return s;
+}
+
+
+/* Get IETF-standard name for ciphersuite.
+Argument: pointer to an SSL structure for the connection
+Returns: pointer to string
+*/
+
+static const uschar *
+cipher_stdname_ssl(SSL * ssl)
+{
+#ifdef EXIM_HAVE_OPENSSL_CIPHER_STD_NAME
+return CUS SSL_CIPHER_standard_name(SSL_get_current_cipher(ssl));
+#else
+ushort id = 0xffff & SSL_CIPHER_get_id(SSL_get_current_cipher(ssl));
+return cipher_stdname(id >> 8, id & 0xff);
+#endif
+}
-DEBUG(D_tls) debug_printf("Cipher: %s\n", cipherbuf);
+
+static const uschar *
+tlsver_name(SSL * ssl)
+{
+uschar * s, * p;
+int pool = store_pool;
+
+store_pool = POOL_PERM;
+s = string_copy(US SSL_get_version(ssl));
+store_pool = pool;
+if ((p = Ustrchr(s, 'v'))) /* TLSv1.2 -> TLS1.2 */
+ for (;; p++) if (!(*p = p[1])) break;
+return CUS s;
}
static void
-peer_cert(SSL * ssl, tls_support * tlsp, uschar * peerdn, unsigned bsize)
+peer_cert(SSL * ssl, tls_support * tlsp, uschar * peerdn, unsigned siz)
{
/*XXX we might consider a list-of-certs variable for the cert chain.
SSL_get_peer_cert_chain(SSL*). We'd need a new variable type and support
in list-handling functions, also consider the difference between the entire
chain and the elements sent by the peer. */
+tlsp->peerdn = NULL;
+
/* Will have already noted peercert on a verify fail; possibly not the leaf */
if (!tlsp->peercert)
tlsp->peercert = SSL_get_peer_certificate(ssl);
/* Beware anonymous ciphers which lead to server_cert being NULL */
if (tlsp->peercert)
- {
- X509_NAME_oneline(X509_get_subject_name(tlsp->peercert), CS peerdn, bsize);
- peerdn[bsize-1] = '\0';
- tlsp->peerdn = peerdn; /*XXX a static buffer... */
- }
-else
- tlsp->peerdn = NULL;
+ if (!X509_NAME_oneline(X509_get_subject_name(tlsp->peercert), CS peerdn, siz))
+ { DEBUG(D_tls) debug_printf("X509_NAME_oneline() error\n"); }
+ else
+ {
+ int oldpool = store_pool;
+
+ peerdn[siz-1] = '\0'; /* paranoia */
+ store_pool = POOL_PERM;
+ tlsp->peerdn = string_copy(peerdn);
+ store_pool = oldpool;
+
+ /* We used to set CV in the cert-verify callbacks (either plain or dane)
+ but they don't get called on session-resumption. So use the official
+ interface, which uses the resumed value. Unfortunately this claims verified
+ when it actually failed but we're in try-verify mode, due to us wanting the
+ knowlege that it failed so needing to have the callback and forcing a
+ permissive return. If we don't force it, the TLS startup is failed.
+ The extra bit of information is set in verify_override in the cb, stashed
+ for resumption next to the TLS session, and used here. */
+
+ if (!tlsp->verify_override)
+ tlsp->certificate_verified =
+#ifdef SUPPORT_DANE
+ tlsp->dane_verified ||
+#endif
+ SSL_get_verify_result(ssl) == X509_V_OK;
+ }
}
* Set up for verifying certificates *
*************************************************/
+#ifndef DISABLE_OCSP
/* Load certs from file, return TRUE on success */
static BOOL
-chain_from_pem_file(const uschar * file, STACK_OF(X509) * verify_stack)
+chain_from_pem_file(const uschar * file, STACK_OF(X509) ** vp)
{
BIO * bp;
-X509 * x;
+STACK_OF(X509) * verify_stack = *vp;
-while (sk_X509_num(verify_stack) > 0)
- X509_free(sk_X509_pop(verify_stack));
+if (verify_stack)
+ while (sk_X509_num(verify_stack) > 0)
+ X509_free(sk_X509_pop(verify_stack));
+else
+ verify_stack = sk_X509_new_null();
if (!(bp = BIO_new_file(CS file, "r"))) return FALSE;
-while ((x = PEM_read_bio_X509(bp, NULL, 0, NULL)))
+for (X509 * x; x = PEM_read_bio_X509(bp, NULL, 0, NULL); )
sk_X509_push(verify_stack, x);
BIO_free(bp);
+*vp = verify_stack;
return TRUE;
}
+#endif
Arguments:
sctx SSL_CTX* to initialise
- certs certs file or NULL
+ certs certs file, expanded
crl CRL file or NULL
host NULL in a server; the remote host in a client
- optional TRUE if called from a server for a host in tls_try_verify_hosts;
- otherwise passed as FALSE
- cert_vfy_cb Callback function for certificate verification
errstr error string pointer
Returns: OK/DEFER/FAIL
*/
static int
-setup_certs(SSL_CTX *sctx, uschar *certs, uschar *crl, host_item *host, BOOL optional,
- int (*cert_vfy_cb)(int, X509_STORE_CTX *), uschar ** errstr)
+setup_certs(SSL_CTX *sctx, uschar *certs, uschar *crl, host_item *host,
+ uschar ** errstr)
{
uschar *expcerts, *expcrl;
if (!SSL_CTX_set_default_verify_paths(sctx))
return tls_error(US"SSL_CTX_set_default_verify_paths", host, NULL, errstr);
- if (Ustrcmp(expcerts, "system") != 0)
+ if (Ustrcmp(expcerts, "system") != 0 && Ustrncmp(expcerts, "system,", 7) != 0)
{
struct stat statbuf;
{ file = NULL; dir = expcerts; }
else
{
+ STACK_OF(X509) * verify_stack =
+#ifndef DISABLE_OCSP
+ !host ? state_server.verify_stack :
+#endif
+ NULL;
+ STACK_OF(X509) ** vp = &verify_stack;
+
file = expcerts; dir = NULL;
#ifndef DISABLE_OCSP
/* In the server if we will be offering an OCSP proof, load chain from
file for verifying the OCSP proof at load time. */
+/*XXX Glitch! The file here is tls_verify_certs: the chain for verifying the client cert.
+This is inconsistent with the need to verify the OCSP proof of the server cert.
+*/
if ( !host
&& statbuf.st_size > 0
- && server_static_cbinfo->u_ocsp.server.file
- && !chain_from_pem_file(file, server_static_cbinfo->verify_stack)
+ && state_server.u_ocsp.server.file
+ && !chain_from_pem_file(file, vp)
)
{
log_write(0, LOG_MAIN|LOG_PANIC,
#endif
}
- /* If a certificate file is empty, the next function fails with an
+ /* If a certificate file is empty, the load function fails with an
unhelpful error message. If we skip it, we get the correct behaviour (no
certificates are recognized, but the error message is still misleading (it
says no certificate was supplied). But this is better. */
if ( (!file || statbuf.st_size > 0)
&& !SSL_CTX_load_verify_locations(sctx, CS file, CS dir))
- return tls_error(US"SSL_CTX_load_verify_locations", host, NULL, errstr);
-
- /* Load the list of CAs for which we will accept certs, for sending
- to the client. This is only for the one-file tls_verify_certificates
- variant.
- If a list isn't loaded into the server, but
- some verify locations are set, the server end appears to make
- a wildcard request for client certs.
+ return tls_error(US"SSL_CTX_load_verify_locations",
+ host, NULL, errstr);
+
+ /* On the server load the list of CAs for which we will accept certs, for
+ sending to the client. This is only for the one-file
+ tls_verify_certificates variant.
+ If a list isn't loaded into the server, but some verify locations are set,
+ the server end appears to make a wildcard request for client certs.
Meanwhile, the client library as default behaviour *ignores* the list
we send over the wire - see man SSL_CTX_set_client_cert_cb.
Because of this, and that the dir variant is likely only used for
- the public-CA bundle (not for a private CA), not worth fixing.
- */
+ the public-CA bundle (not for a private CA), not worth fixing. */
+
if (file)
{
STACK_OF(X509_NAME) * names = SSL_load_client_CA_file(CS file);
+ int i = sk_X509_NAME_num(names);
- SSL_CTX_set_client_CA_list(sctx, names);
- DEBUG(D_tls) debug_printf("Added %d certificate authorities.\n",
- sk_X509_NAME_num(names));
+ if (!host) SSL_CTX_set_client_CA_list(sctx, names);
+ DEBUG(D_tls) debug_printf("Added %d additional certificate authorit%s\n",
+ i, i>1 ? "ies":"y");
}
+ else
+ DEBUG(D_tls)
+ debug_printf("Added dir for additional certificate authorities\n");
}
}
}
#endif /* OPENSSL_VERSION_NUMBER > 0x00907000L */
-
- /* If verification is optional, don't fail if no certificate */
-
- SSL_CTX_set_verify(sctx,
- SSL_VERIFY_PEER | (optional? 0 : SSL_VERIFY_FAIL_IF_NO_PEER_CERT),
- cert_vfy_cb);
}
return OK;
+static void
+tls_dump_keylog(SSL * ssl)
+{
+#ifdef EXIM_HAVE_OPENSSL_KEYLOG
+ BIO * bp = BIO_new(BIO_s_mem());
+ uschar * s = NULL;
+ int len;
+ SSL_SESSION_print_keylog(bp, SSL_get_session(ssl));
+ len = (int) BIO_get_mem_data(bp, CSS &s);
+ if (len > 0) debug_printf("%.*s", len, s);
+ BIO_free(bp);
+#endif
+}
+
+
/*************************************************
* Start a TLS session in a server *
*************************************************/
-
/* This is called when Exim is running as a server, after having received
the STARTTLS command. It must respond to that command, and then negotiate
a TLS session.
Arguments:
- require_ciphers allowed ciphers
errstr pointer to error message
Returns: OK on success
*/
int
-tls_server_start(const uschar * require_ciphers, uschar ** errstr)
+tls_server_start(uschar ** errstr)
{
int rc;
uschar * expciphers;
-tls_ext_ctx_cb * cbinfo;
+exim_openssl_state_st * dummy_statep;
+SSL_CTX * ctx;
+SSL * ssl;
static uschar peerdn[256];
-static uschar cipherbuf[256];
/* Check for previous activation */
-if (tls_in.active >= 0)
+if (tls_in.active.sock >= 0)
{
tls_error(US"STARTTLS received after TLS started", NULL, US"", errstr);
smtp_printf("554 Already in TLS\r\n", FALSE);
/* Initialize the SSL library. If it fails, it will already have logged
the error. */
-rc = tls_init(&server_ctx, NULL, tls_dhparam, tls_certificate, tls_privatekey,
+rc = tls_init(NULL, NULL,
#ifndef DISABLE_OCSP
- tls_ocsp_file, /*XXX stack*/
+ tls_ocsp_file,
#endif
- NULL, &server_static_cbinfo, errstr);
+ NULL, &dummy_statep, &tls_in, errstr);
if (rc != OK) return rc;
-cbinfo = server_static_cbinfo;
-
-if (!expand_check(require_ciphers, US"tls_require_ciphers", &expciphers, errstr))
- return FAIL;
+ctx = state_server.lib_state.lib_ctx;
/* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
were historically separated by underscores. So that I can use either form in my
tests, and also for general convenience, we turn underscores into hyphens here.
+
+XXX SSL_CTX_set_cipher_list() is replaced by SSL_CTX_set_ciphersuites()
+for TLS 1.3 . Since we do not call it at present we get the default list:
+TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
*/
-if (expciphers)
+if (state_server.lib_state.pri_string)
+ { DEBUG(D_tls) debug_printf("TLS: cipher list was preloaded\n"); }
+else
{
- uschar * s = expciphers;
- while (*s != 0) { if (*s == '_') *s = '-'; s++; }
- DEBUG(D_tls) debug_printf("required ciphers: %s\n", expciphers);
- if (!SSL_CTX_set_cipher_list(server_ctx, CS expciphers))
- return tls_error(US"SSL_CTX_set_cipher_list", NULL, NULL, errstr);
- cbinfo->server_cipher_list = expciphers;
+ if (!expand_check(tls_require_ciphers, US"tls_require_ciphers", &expciphers, errstr))
+ return FAIL;
+
+ if (expciphers)
+ {
+ normalise_ciphers(&expciphers, tls_require_ciphers);
+ if ((rc = server_load_ciphers(ctx, &state_server, expciphers, errstr)) != OK)
+ return rc;
+ }
}
/* If this is a host for which certificate verification is mandatory or
server_verify_callback_called = FALSE;
if (verify_check_host(&tls_verify_hosts) == OK)
- {
- rc = setup_certs(server_ctx, tls_verify_certificates, tls_crl, NULL,
- FALSE, verify_callback_server, errstr);
- if (rc != OK) return rc;
server_verify_optional = FALSE;
- }
else if (verify_check_host(&tls_try_verify_hosts) == OK)
- {
- rc = setup_certs(server_ctx, tls_verify_certificates, tls_crl, NULL,
- TRUE, verify_callback_server, errstr);
- if (rc != OK) return rc;
server_verify_optional = TRUE;
- }
+else
+ goto skip_certs;
+
+ {
+ uschar * expcerts;
+ if (!expand_check(tls_verify_certificates, US"tls_verify_certificates",
+ &expcerts, errstr))
+ return DEFER;
+ DEBUG(D_tls) debug_printf("tls_verify_certificates: %s\n", expcerts);
+
+ if (state_server.lib_state.cabundle)
+ { DEBUG(D_tls) debug_printf("TLS: CA bundle for server was preloaded\n"); }
+ else
+ if ((rc = setup_certs(ctx, expcerts, tls_crl, NULL, errstr)) != OK)
+ return rc;
+
+ if (expcerts && *expcerts)
+ setup_cert_verify(ctx, server_verify_optional, verify_callback_server);
+ }
+skip_certs: ;
+
+#ifndef DISABLE_TLS_RESUME
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+SSL_CTX_set_tlsext_ticket_key_cb(ctx, ticket_key_callback);
+/* despite working, appears to always return failure, so ignoring */
+# else
+SSL_CTX_set_tlsext_ticket_key_evp_cb(ctx, ticket_key_callback);
+/* despite working, appears to always return failure, so ignoring */
+# endif
+#endif
+
+#ifdef OPENSSL_HAVE_NUM_TICKETS
+# ifndef DISABLE_TLS_RESUME
+SSL_CTX_set_num_tickets(ctx, tls_in.host_resumable ? 1 : 0);
+# else
+SSL_CTX_set_num_tickets(ctx, 0); /* send no TLS1.3 stateful-tickets */
+# endif
+#endif
+
/* Prepare for new connection */
-if (!(server_ssl = SSL_new(server_ctx)))
+if (!(ssl = SSL_new(ctx)))
return tls_error(US"SSL_new", NULL, NULL, errstr);
+state_server.lib_state.lib_ssl = ssl;
/* Warning: we used to SSL_clear(ssl) here, it was removed.
*
the response. Other smtp_printf() calls do not need it, because in non-TLS
mode, the fflush() happens when smtp_getc() is called. */
-SSL_set_session_id_context(server_ssl, sid_ctx, Ustrlen(sid_ctx));
+SSL_set_session_id_context(ssl, sid_ctx, Ustrlen(sid_ctx));
if (!tls_in.on_connect)
{
smtp_printf("220 TLS go ahead\r\n", FALSE);
/* Now negotiate the TLS session. We put our own timer on it, since it seems
that the OpenSSL library doesn't. */
-SSL_set_wfd(server_ssl, fileno(smtp_out));
-SSL_set_rfd(server_ssl, fileno(smtp_in));
-SSL_set_accept_state(server_ssl);
+SSL_set_wfd(ssl, fileno(smtp_out));
+SSL_set_rfd(ssl, fileno(smtp_in));
+SSL_set_accept_state(ssl);
DEBUG(D_tls) debug_printf("Calling SSL_accept\n");
+ERR_clear_error();
sigalrm_seen = FALSE;
-if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
-rc = SSL_accept(server_ssl);
-alarm(0);
+if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
+rc = SSL_accept(ssl);
+ALARM_CLR(0);
if (rc <= 0)
{
- (void) tls_error(US"SSL_accept", NULL, sigalrm_seen ? US"timed out" : NULL, errstr);
- return FAIL;
+ int error = SSL_get_error(ssl, rc);
+ switch(error)
+ {
+ case SSL_ERROR_NONE:
+ break;
+
+ case SSL_ERROR_ZERO_RETURN:
+ DEBUG(D_tls) debug_printf("Got SSL_ERROR_ZERO_RETURN\n");
+ (void) tls_error(US"SSL_accept", NULL, sigalrm_seen ? US"timed out" : NULL, errstr);
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+
+ if (SSL_get_shutdown(ssl) == SSL_RECEIVED_SHUTDOWN)
+ SSL_shutdown(ssl);
+
+ tls_close(NULL, TLS_NO_SHUTDOWN);
+ return FAIL;
+
+ /* Handle genuine errors */
+ case SSL_ERROR_SSL:
+ {
+ uschar * s = NULL;
+ int r = ERR_GET_REASON(ERR_peek_error());
+ if ( r == SSL_R_WRONG_VERSION_NUMBER
+#ifdef SSL_R_VERSION_TOO_LOW
+ || r == SSL_R_VERSION_TOO_LOW
+#endif
+ || r == SSL_R_UNKNOWN_PROTOCOL || r == SSL_R_UNSUPPORTED_PROTOCOL)
+ s = string_sprintf("(%s)", SSL_get_version(ssl));
+ (void) tls_error(US"SSL_accept", NULL, sigalrm_seen ? US"timed out" : s, errstr);
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+ return FAIL;
+ }
+
+ default:
+ DEBUG(D_tls) debug_printf("Got SSL error %d\n", error);
+ if (error == SSL_ERROR_SYSCALL)
+ {
+ if (!errno)
+ {
+ *errstr = US"SSL_accept: TCP connection closed by peer";
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+ return FAIL;
+ }
+ DEBUG(D_tls) debug_printf(" - syscall %s\n", strerror(errno));
+ }
+ (void) tls_error(US"SSL_accept", NULL,
+ sigalrm_seen ? US"timed out"
+ : ERR_peek_error() ? NULL : string_sprintf("ret %d", error),
+ errstr);
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+ return FAIL;
+ }
}
DEBUG(D_tls) debug_printf("SSL_accept was successful\n");
+ERR_clear_error(); /* Even success can leave errors in the stack. Seen with
+ anon-authentication ciphersuite negotiated. */
+
+#ifndef DISABLE_TLS_RESUME
+if (SSL_session_reused(ssl))
+ {
+ tls_in.resumption |= RESUME_USED;
+ DEBUG(D_tls) debug_printf("Session reused\n");
+ }
+#endif
+
+#ifdef EXIM_HAVE_ALPN
+/* If require-alpn, check server_seen_alpn here. Else abort TLS */
+if (!tls_alpn || !*tls_alpn)
+ { DEBUG(D_tls) debug_printf("TLS: was not watching for ALPN\n"); }
+else if (!server_seen_alpn)
+ if (verify_check_host(&hosts_require_alpn) == OK)
+ {
+ /* We'd like to send a definitive Alert but OpenSSL provides no facility */
+ SSL_shutdown(ssl);
+ tls_error(US"handshake", NULL, US"ALPN required but not negotiated", errstr);
+ return FAIL;
+ }
+ else
+ { DEBUG(D_tls) debug_printf("TLS: no ALPN presented in handshake\n"); }
+else DEBUG(D_tls)
+ {
+ const uschar * name;
+ unsigned len;
+ SSL_get0_alpn_selected(ssl, &name, &len);
+ if (len && name)
+ debug_printf("ALPN negotiated: '%.*s'\n", (int)*name, name+1);
+ else
+ debug_printf("ALPN: no protocol negotiated\n");
+ }
+#endif
-/* TLS has been set up. Adjust the input functions to read via TLS,
-and initialize things. */
-peer_cert(server_ssl, &tls_in, peerdn, sizeof(peerdn));
+/* TLS has been set up. Record data for the connection,
+adjust the input functions to read via TLS, and initialize things. */
-construct_cipher_name(server_ssl, cipherbuf, sizeof(cipherbuf), &tls_in.bits);
-tls_in.cipher = cipherbuf;
+#ifdef SSL_get_extms_support
+tls_in.ext_master_secret = SSL_get_extms_support(ssl) == 1;
+#endif
+peer_cert(ssl, &tls_in, peerdn, sizeof(peerdn));
+
+tls_in.ver = tlsver_name(ssl);
+tls_in.cipher = construct_cipher_name(ssl, tls_in.ver, &tls_in.bits);
+tls_in.cipher_stdname = cipher_stdname_ssl(ssl);
DEBUG(D_tls)
{
uschar buf[2048];
- if (SSL_get_shared_ciphers(server_ssl, CS buf, sizeof(buf)) != NULL)
+ if (SSL_get_shared_ciphers(ssl, CS buf, sizeof(buf)))
debug_printf("Shared ciphers: %s\n", buf);
+
+ tls_dump_keylog(ssl);
+
+#ifdef EXIM_HAVE_SESSION_TICKET
+ {
+ SSL_SESSION * ss = SSL_get_session(ssl);
+ if (SSL_SESSION_has_ticket(ss)) /* 1.1.0 */
+ debug_printf("The session has a ticket, life %lu seconds\n",
+ SSL_SESSION_get_ticket_lifetime_hint(ss));
+ }
+#endif
}
/* Record the certificate we presented */
{
- X509 * crt = SSL_get_certificate(server_ssl);
+ X509 * crt = SSL_get_certificate(ssl);
tls_in.ourcert = crt ? X509_dup(crt) : NULL;
}
+/* Channel-binding info for authenticators
+See description in https://paquier.xyz/postgresql-2/channel-binding-openssl/ */
+ {
+ uschar c, * s;
+ size_t len = SSL_get_peer_finished(ssl, &c, 0);
+ int old_pool = store_pool;
+
+ SSL_get_peer_finished(ssl, s = store_get((int)len, FALSE), len);
+ store_pool = POOL_PERM;
+ tls_in.channelbinding = b64encode_taint(CUS s, (int)len, FALSE);
+ store_pool = old_pool;
+ DEBUG(D_tls) debug_printf("Have channel bindings cached for possible auth usage %p\n", tls_in.channelbinding);
+ }
+
/* Only used by the server-side tls (tls_in), including tls_getc.
Client-side (tls_out) reads (seem to?) go via
smtp_read_response()/ip_recv().
receive_getc = tls_getc;
receive_getbuf = tls_getbuf;
receive_get_cache = tls_get_cache;
+receive_hasc = tls_hasc;
receive_ungetc = tls_ungetc;
receive_feof = tls_feof;
receive_ferror = tls_ferror;
-receive_smtp_buffered = tls_smtp_buffered;
-tls_in.active = fileno(smtp_out);
+tls_in.active.sock = fileno(smtp_out);
+tls_in.active.tls_ctx = NULL; /* not using explicit ctx for server-side */
return OK;
}
static int
tls_client_basic_ctx_init(SSL_CTX * ctx,
- host_item * host, smtp_transport_options_block * ob, tls_ext_ctx_cb * cbinfo,
+ host_item * host, smtp_transport_options_block * ob, exim_openssl_state_st * state,
uschar ** errstr)
{
int rc;
-/* stick to the old behaviour for compatibility if tls_verify_certificates is
- set but both tls_verify_hosts and tls_try_verify_hosts is not set. Check only
- the specified host patterns if one of them is defined */
-if ( ( !ob->tls_verify_hosts
- && (!ob->tls_try_verify_hosts || !*ob->tls_try_verify_hosts)
+/* Back-compatible old behaviour if tls_verify_certificates is set but both
+tls_verify_hosts and tls_try_verify_hosts are not set. Check only the specified
+host patterns if one of them is set with content. */
+
+if ( ( ( !ob->tls_verify_hosts || !ob->tls_verify_hosts
+ || Ustrcmp(ob->tls_try_verify_hosts, ":") == 0
+ )
+ && ( !ob->tls_try_verify_hosts || !*ob->tls_try_verify_hosts
+ || Ustrcmp(ob->tls_try_verify_hosts, ":") == 0
+ )
)
- || (verify_check_given_host(&ob->tls_verify_hosts, host) == OK)
+ || verify_check_given_host(CUSS &ob->tls_verify_hosts, host) == OK
)
client_verify_optional = FALSE;
-else if (verify_check_given_host(&ob->tls_try_verify_hosts, host) == OK)
+else if (verify_check_given_host(CUSS &ob->tls_try_verify_hosts, host) == OK)
client_verify_optional = TRUE;
else
return OK;
-if ((rc = setup_certs(ctx, ob->tls_verify_certificates,
- ob->tls_crl, host, client_verify_optional, verify_callback_client,
- errstr)) != OK)
- return rc;
+ {
+ uschar * expcerts;
+ if (!expand_check(ob->tls_verify_certificates, US"tls_verify_certificates",
+ &expcerts, errstr))
+ return DEFER;
+ DEBUG(D_tls) debug_printf("tls_verify_certificates: %s\n", expcerts);
+
+ if (state->lib_state.cabundle)
+ { DEBUG(D_tls) debug_printf("TLS: CA bundle was preloaded\n"); }
+ else
+ if ((rc = setup_certs(ctx, expcerts, ob->tls_crl, host, errstr)) != OK)
+ return rc;
+
+ if (expcerts && *expcerts)
+ setup_cert_verify(ctx, client_verify_optional, verify_callback_client);
+ }
-if (verify_check_given_host(&ob->tls_verify_cert_hostnames, host) == OK)
+if (verify_check_given_host(CUSS &ob->tls_verify_cert_hostnames, host) == OK)
{
- cbinfo->verify_cert_hostnames =
+ state->verify_cert_hostnames =
#ifdef SUPPORT_I18N
- string_domain_utf8_to_alabel(host->name, NULL);
+ string_domain_utf8_to_alabel(host->certname, NULL);
#else
- host->name;
+ host->certname;
#endif
DEBUG(D_tls) debug_printf("Cert hostname to check: \"%s\"\n",
- cbinfo->verify_cert_hostnames);
+ state->verify_cert_hostnames);
}
return OK;
}
static int
dane_tlsa_load(SSL * ssl, host_item * host, dns_answer * dnsa, uschar ** errstr)
{
-dns_record * rr;
dns_scan dnss;
const char * hostnames[2] = { CS host->name, NULL };
int found = 0;
if (DANESSL_init(ssl, NULL, hostnames) != 1)
return tls_error(US"hostnames load", host, NULL, errstr);
-for (rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS);
- rr;
+for (dns_record * rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS); rr;
rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)
- ) if (rr->type == T_TLSA)
+ ) if (rr->type == T_TLSA && rr->size > 3)
{
const uschar * p = rr->data;
uint8_t usage, selector, mtype;
+#ifndef DISABLE_TLS_RESUME
+/* On the client, get any stashed session for the given IP from hints db
+and apply it to the ssl-connection for attempted resumption. */
+
+static void
+tls_retrieve_session(tls_support * tlsp, SSL * ssl, const uschar * key)
+{
+tlsp->resumption |= RESUME_SUPPORTED;
+if (tlsp->host_resumable)
+ {
+ dbdata_tls_session * dt;
+ int len;
+ open_db dbblock, * dbm_file;
+
+ tlsp->resumption |= RESUME_CLIENT_REQUESTED;
+ DEBUG(D_tls) debug_printf("checking for resumable session for %s\n", key);
+ if ((dbm_file = dbfn_open(US"tls", O_RDWR, &dbblock, FALSE, FALSE)))
+ {
+ /* key for the db is the IP */
+ if ((dt = dbfn_read_with_length(dbm_file, key, &len)))
+ {
+ SSL_SESSION * ss = NULL;
+ const uschar * sess_asn1 = dt->session;
+
+ len -= sizeof(dbdata_tls_session);
+ if (!(d2i_SSL_SESSION(&ss, &sess_asn1, (long)len)))
+ {
+ DEBUG(D_tls)
+ {
+ ERR_error_string_n(ERR_get_error(),
+ ssl_errstring, sizeof(ssl_errstring));
+ debug_printf("decoding session: %s\n", ssl_errstring);
+ }
+ }
+ else
+ {
+ unsigned long lifetime =
+#ifdef EXIM_HAVE_SESSION_TICKET
+ SSL_SESSION_get_ticket_lifetime_hint(ss);
+#else /* Use, fairly arbitrilarily, what we as server would */
+ f.running_in_test_harness ? 6 : ssl_session_timeout;
+#endif
+ if (lifetime + dt->time_stamp < time(NULL))
+ {
+ DEBUG(D_tls) debug_printf("session expired\n");
+ dbfn_delete(dbm_file, key);
+ }
+ else if (!SSL_set_session(ssl, ss))
+ {
+ DEBUG(D_tls)
+ {
+ ERR_error_string_n(ERR_get_error(),
+ ssl_errstring, sizeof(ssl_errstring));
+ debug_printf("applying session to ssl: %s\n", ssl_errstring);
+ }
+ }
+ else
+ {
+ DEBUG(D_tls) debug_printf("good session\n");
+ tlsp->resumption |= RESUME_CLIENT_SUGGESTED;
+ tlsp->verify_override = dt->verify_override;
+ tlsp->ocsp = dt->ocsp;
+ }
+ }
+ }
+ else
+ DEBUG(D_tls) debug_printf("no session record\n");
+ dbfn_close(dbm_file);
+ }
+ }
+}
+
+
+/* On the client, save the session for later resumption */
+
+static int
+tls_save_session_cb(SSL * ssl, SSL_SESSION * ss)
+{
+exim_openssl_state_st * cbinfo = SSL_get_ex_data(ssl, tls_exdata_idx);
+tls_support * tlsp;
+
+DEBUG(D_tls) debug_printf("tls_save_session_cb\n");
+
+if (!cbinfo || !(tlsp = cbinfo->tlsp)->host_resumable) return 0;
+
+# ifdef OPENSSL_HAVE_NUM_TICKETS
+if (SSL_SESSION_is_resumable(ss)) /* 1.1.1 */
+# endif
+ {
+ int len = i2d_SSL_SESSION(ss, NULL);
+ int dlen = sizeof(dbdata_tls_session) + len;
+ dbdata_tls_session * dt = store_get(dlen, TRUE);
+ uschar * s = dt->session;
+ open_db dbblock, * dbm_file;
+
+ DEBUG(D_tls) debug_printf("session is resumable\n");
+ tlsp->resumption |= RESUME_SERVER_TICKET; /* server gave us a ticket */
+
+ dt->verify_override = tlsp->verify_override;
+ dt->ocsp = tlsp->ocsp;
+ (void) i2d_SSL_SESSION(ss, &s); /* s gets bumped to end */
+
+ if ((dbm_file = dbfn_open(US"tls", O_RDWR, &dbblock, FALSE, FALSE)))
+ {
+ const uschar * key = cbinfo->host->address;
+ dbfn_delete(dbm_file, key);
+ dbfn_write(dbm_file, key, dt, dlen);
+ dbfn_close(dbm_file);
+ DEBUG(D_tls) debug_printf("wrote session (len %u) to db\n",
+ (unsigned)dlen);
+ }
+ }
+return 1;
+}
+
+
+static void
+tls_client_ctx_resume_prehandshake(
+ exim_openssl_client_tls_ctx * exim_client_ctx, tls_support * tlsp,
+ smtp_transport_options_block * ob, host_item * host)
+{
+/* Should the client request a session resumption ticket? */
+if (verify_check_given_host(CUSS &ob->tls_resumption_hosts, host) == OK)
+ {
+ tlsp->host_resumable = TRUE;
+
+ SSL_CTX_set_session_cache_mode(exim_client_ctx->ctx,
+ SSL_SESS_CACHE_CLIENT
+ | SSL_SESS_CACHE_NO_INTERNAL | SSL_SESS_CACHE_NO_AUTO_CLEAR);
+ SSL_CTX_sess_set_new_cb(exim_client_ctx->ctx, tls_save_session_cb);
+ }
+}
+
+static BOOL
+tls_client_ssl_resume_prehandshake(SSL * ssl, tls_support * tlsp,
+ host_item * host, uschar ** errstr)
+{
+if (tlsp->host_resumable)
+ {
+ DEBUG(D_tls)
+ debug_printf("tls_resumption_hosts overrides openssl_options, enabling tickets\n");
+ SSL_clear_options(ssl, SSL_OP_NO_TICKET);
+
+ tls_exdata_idx = SSL_get_ex_new_index(0, 0, 0, 0, 0);
+ if (!SSL_set_ex_data(ssl, tls_exdata_idx, client_static_state))
+ {
+ tls_error(US"set ex_data", host, NULL, errstr);
+ return FALSE;
+ }
+ debug_printf("tls_exdata_idx %d cbinfo %p\n", tls_exdata_idx, client_static_state);
+ }
+
+tlsp->resumption = RESUME_SUPPORTED;
+/* Pick up a previous session, saved on an old ticket */
+tls_retrieve_session(tlsp, ssl, host->address);
+return TRUE;
+}
+
+static void
+tls_client_resume_posthandshake(exim_openssl_client_tls_ctx * exim_client_ctx,
+ tls_support * tlsp)
+{
+if (SSL_session_reused(exim_client_ctx->ssl))
+ {
+ DEBUG(D_tls) debug_printf("The session was reused\n");
+ tlsp->resumption |= RESUME_USED;
+ }
+}
+#endif /* !DISABLE_TLS_RESUME */
+
+
+#ifdef EXIM_HAVE_ALPN
+/* Expand and convert an Exim list to an ALPN list. False return for fail.
+NULL plist return for silent no-ALPN.
+*/
+
+static BOOL
+tls_alpn_plist(const uschar * tls_alpn, const uschar ** plist, unsigned * plen,
+ uschar ** errstr)
+{
+uschar * exp_alpn;
+
+if (!expand_check(tls_alpn, US"tls_alpn", &exp_alpn, errstr))
+ return FALSE;
+
+if (!exp_alpn)
+ {
+ DEBUG(D_tls) debug_printf("Setting TLS ALPN forced to fail, not sending\n");
+ *plist = NULL;
+ }
+else
+ {
+ /* The server implementation only accepts exactly one protocol name
+ but it's little extra code complexity in the client. */
+
+ const uschar * list = exp_alpn;
+ uschar * p = store_get(Ustrlen(exp_alpn), is_tainted(exp_alpn)), * s, * t;
+ int sep = 0;
+ uschar len;
+
+ for (t = p; s = string_nextinlist(&list, &sep, NULL, 0); t += len)
+ {
+ *t++ = len = (uschar) Ustrlen(s);
+ memcpy(t, s, len);
+ }
+ *plist = (*plen = t - p) ? p : NULL;
+ }
+return TRUE;
+}
+#endif /* EXIM_HAVE_ALPN */
+
+
/*************************************************
* Start a TLS session in a client *
*************************************************/
/* Called from the smtp transport after STARTTLS has been accepted.
-Argument:
- fd the fd of the connection
- host connected host (for messages)
- addr the first address
- tb transport (always smtp)
- tlsa_dnsa tlsa lookup, if DANE, else null
- errstr error string pointer
-
-Returns: OK on success
- FAIL otherwise - note that tls_error() will not give DEFER
- because this is not a server
-*/
+Arguments:
+ cctx connection context
+ conn_args connection details
+ cookie datum for randomness; can be NULL
+ tlsp record details of TLS channel configuration here; must be non-NULL
+ errstr error string pointer
-int
-tls_client_start(int fd, host_item *host, address_item *addr,
- transport_instance * tb,
-#ifdef SUPPORT_DANE
- dns_answer * tlsa_dnsa,
-#endif
- uschar ** errstr)
+Returns: TRUE for success with TLS session context set in connection context,
+ FALSE on error
+*/
+
+BOOL
+tls_client_start(client_conn_ctx * cctx, smtp_connect_args * conn_args,
+ void * cookie, tls_support * tlsp, uschar ** errstr)
{
-smtp_transport_options_block * ob =
- (smtp_transport_options_block *)tb->options_block;
-static uschar peerdn[256];
+host_item * host = conn_args->host; /* for msgs and option-tests */
+transport_instance * tb = conn_args->tblock; /* always smtp or NULL */
+smtp_transport_options_block * ob = tb
+ ? (smtp_transport_options_block *)tb->options_block
+ : &smtp_transport_option_defaults;
+exim_openssl_client_tls_ctx * exim_client_ctx;
uschar * expciphers;
int rc;
-static uschar cipherbuf[256];
+static uschar peerdn[256];
#ifndef DISABLE_OCSP
BOOL request_ocsp = FALSE;
BOOL require_ocsp = FALSE;
#endif
+rc = store_pool;
+store_pool = POOL_PERM;
+exim_client_ctx = store_get(sizeof(exim_openssl_client_tls_ctx), FALSE);
+exim_client_ctx->corked = NULL;
+store_pool = rc;
+
#ifdef SUPPORT_DANE
-tls_out.tlsa_usage = 0;
+tlsp->tlsa_usage = 0;
#endif
#ifndef DISABLE_OCSP
{
# ifdef SUPPORT_DANE
- if ( tlsa_dnsa
+ /*XXX this should be moved to caller, to be common across gnutls/openssl */
+ if ( conn_args->dane
&& ob->hosts_request_ocsp[0] == '*'
&& ob->hosts_request_ocsp[1] == '\0'
)
# endif
if ((require_ocsp =
- verify_check_given_host(&ob->hosts_require_ocsp, host) == OK))
+ verify_check_given_host(CUSS &ob->hosts_require_ocsp, host) == OK))
request_ocsp = TRUE;
else
# ifdef SUPPORT_DANE
if (!request_ocsp)
# endif
request_ocsp =
- verify_check_given_host(&ob->hosts_request_ocsp, host) == OK;
+ verify_check_given_host(CUSS &ob->hosts_request_ocsp, host) == OK;
}
#endif
-rc = tls_init(&client_ctx, host, NULL,
- ob->tls_certificate, ob->tls_privatekey,
+rc = tls_init(host, ob,
#ifndef DISABLE_OCSP
(void *)(long)request_ocsp,
#endif
- addr, &client_static_cbinfo, errstr);
-if (rc != OK) return rc;
+ cookie, &client_static_state, tlsp, errstr);
+if (rc != OK) return FALSE;
+
+exim_client_ctx->ctx = client_static_state->lib_state.lib_ctx;
-tls_out.certificate_verified = FALSE;
+tlsp->certificate_verified = FALSE;
client_verify_callback_called = FALSE;
expciphers = NULL;
#ifdef SUPPORT_DANE
-if (tlsa_dnsa)
+if (conn_args->dane)
{
/* We fall back to tls_require_ciphers if unset, empty or forced failure, but
other failures should be treated as problems. */
if (ob->dane_require_tls_ciphers &&
!expand_check(ob->dane_require_tls_ciphers, US"dane_require_tls_ciphers",
&expciphers, errstr))
- return FAIL;
+ return FALSE;
if (expciphers && *expciphers == '\0')
expciphers = NULL;
+
+ normalise_ciphers(&expciphers, ob->dane_require_tls_ciphers);
}
#endif
-if (!expciphers &&
- !expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
+if (!expciphers)
+ {
+ if (!expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
&expciphers, errstr))
- return FAIL;
+ return FALSE;
-/* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
-are separated by underscores. So that I can use either form in my tests, and
-also for general convenience, we turn underscores into hyphens here. */
+ /* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
+ are separated by underscores. So that I can use either form in my tests, and
+ also for general convenience, we turn underscores into hyphens here. */
+
+ normalise_ciphers(&expciphers, ob->tls_require_ciphers);
+ }
if (expciphers)
{
- uschar *s = expciphers;
- while (*s) { if (*s == '_') *s = '-'; s++; }
DEBUG(D_tls) debug_printf("required ciphers: %s\n", expciphers);
- if (!SSL_CTX_set_cipher_list(client_ctx, CS expciphers))
- return tls_error(US"SSL_CTX_set_cipher_list", host, NULL, errstr);
+ if (!SSL_CTX_set_cipher_list(exim_client_ctx->ctx, CS expciphers))
+ {
+ tls_error(US"SSL_CTX_set_cipher_list", host, NULL, errstr);
+ return FALSE;
+ }
}
#ifdef SUPPORT_DANE
-if (tlsa_dnsa)
+if (conn_args->dane)
{
- SSL_CTX_set_verify(client_ctx,
+ SSL_CTX_set_verify(exim_client_ctx->ctx,
SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT,
verify_callback_client_dane);
if (!DANESSL_library_init())
- return tls_error(US"library init", host, NULL, errstr);
- if (DANESSL_CTX_init(client_ctx) <= 0)
- return tls_error(US"context init", host, NULL, errstr);
+ {
+ tls_error(US"library init", host, NULL, errstr);
+ return FALSE;
+ }
+ if (DANESSL_CTX_init(exim_client_ctx->ctx) <= 0)
+ {
+ tls_error(US"context init", host, NULL, errstr);
+ return FALSE;
+ }
}
else
#endif
- if ((rc = tls_client_basic_ctx_init(client_ctx, host, ob,
- client_static_cbinfo, errstr)) != OK)
- return rc;
+if (tls_client_basic_ctx_init(exim_client_ctx->ctx, host, ob,
+ client_static_state, errstr) != OK)
+ return FALSE;
+
+#ifndef DISABLE_TLS_RESUME
+tls_client_ctx_resume_prehandshake(exim_client_ctx, tlsp, ob, host);
+#endif
+
+
+if (!(exim_client_ctx->ssl = SSL_new(exim_client_ctx->ctx)))
+ {
+ tls_error(US"SSL_new", host, NULL, errstr);
+ return FALSE;
+ }
+SSL_set_session_id_context(exim_client_ctx->ssl, sid_ctx, Ustrlen(sid_ctx));
-if ((client_ssl = SSL_new(client_ctx)) == NULL)
- return tls_error(US"SSL_new", host, NULL, errstr);
-SSL_set_session_id_context(client_ssl, sid_ctx, Ustrlen(sid_ctx));
-SSL_set_fd(client_ssl, fd);
-SSL_set_connect_state(client_ssl);
+SSL_set_fd(exim_client_ctx->ssl, cctx->sock);
+SSL_set_connect_state(exim_client_ctx->ssl);
if (ob->tls_sni)
{
- if (!expand_check(ob->tls_sni, US"tls_sni", &tls_out.sni, errstr))
- return FAIL;
- if (!tls_out.sni)
+ if (!expand_check(ob->tls_sni, US"tls_sni", &tlsp->sni, errstr))
+ return FALSE;
+ if (!tlsp->sni)
{
DEBUG(D_tls) debug_printf("Setting TLS SNI forced to fail, not sending\n");
}
- else if (!Ustrlen(tls_out.sni))
- tls_out.sni = NULL;
+ else if (!Ustrlen(tlsp->sni))
+ tlsp->sni = NULL;
else
{
#ifdef EXIM_HAVE_OPENSSL_TLSEXT
- DEBUG(D_tls) debug_printf("Setting TLS SNI \"%s\"\n", tls_out.sni);
- SSL_set_tlsext_host_name(client_ssl, tls_out.sni);
+ DEBUG(D_tls) debug_printf("Setting TLS SNI \"%s\"\n", tlsp->sni);
+ SSL_set_tlsext_host_name(exim_client_ctx->ssl, tlsp->sni);
#else
log_write(0, LOG_MAIN, "SNI unusable with this OpenSSL library version; ignoring \"%s\"\n",
- tls_out.sni);
+ tlsp->sni);
#endif
}
}
+if (ob->tls_alpn)
+#ifdef EXIM_HAVE_ALPN
+ {
+ const uschar * plist;
+ unsigned plen;
+
+ if (!tls_alpn_plist(ob->tls_alpn, &plist, &plen, errstr))
+ return FALSE;
+ if (plist)
+ if (SSL_set_alpn_protos(exim_client_ctx->ssl, plist, plen) != 0)
+ {
+ tls_error(US"alpn init", host, NULL, errstr);
+ return FALSE;
+ }
+ else
+ DEBUG(D_tls) debug_printf("Setting TLS ALPN '%s'\n", ob->tls_alpn);
+ }
+#else
+ log_write(0, LOG_MAIN, "ALPN unusable with this OpenSSL library version; ignoring \"%s\"\n",
+ ob->tls_alpn);
+#endif
+
#ifdef SUPPORT_DANE
-if (tlsa_dnsa)
- if ((rc = dane_tlsa_load(client_ssl, host, tlsa_dnsa, errstr)) != OK)
- return rc;
+if (conn_args->dane)
+ if (dane_tlsa_load(exim_client_ctx->ssl, host, &conn_args->tlsa_dnsa, errstr) != OK)
+ return FALSE;
#endif
#ifndef DISABLE_OCSP
{ /* Re-eval now $tls_out_tlsa_usage is populated. If
this means we avoid the OCSP request, we wasted the setup
cost in tls_init(). */
- require_ocsp = verify_check_given_host(&ob->hosts_require_ocsp, host) == OK;
+ require_ocsp = verify_check_given_host(CUSS &ob->hosts_require_ocsp, host) == OK;
request_ocsp = require_ocsp
- || verify_check_given_host(&ob->hosts_request_ocsp, host) == OK;
+ || verify_check_given_host(CUSS &ob->hosts_request_ocsp, host) == OK;
}
}
# endif
if (request_ocsp)
{
- SSL_set_tlsext_status_type(client_ssl, TLSEXT_STATUSTYPE_ocsp);
- client_static_cbinfo->u_ocsp.client.verify_required = require_ocsp;
- tls_out.ocsp = OCSP_NOT_RESP;
+ SSL_set_tlsext_status_type(exim_client_ctx->ssl, TLSEXT_STATUSTYPE_ocsp);
+ client_static_state->u_ocsp.client.verify_required = require_ocsp;
+ tlsp->ocsp = OCSP_NOT_RESP;
}
#endif
+#ifndef DISABLE_TLS_RESUME
+if (!tls_client_ssl_resume_prehandshake(exim_client_ctx->ssl, tlsp, host,
+ errstr))
+ return FALSE;
+#endif
+
#ifndef DISABLE_EVENT
-client_static_cbinfo->event_action = tb->event_action;
+client_static_state->event_action = tb ? tb->event_action : NULL;
#endif
/* There doesn't seem to be a built-in timeout on connection. */
DEBUG(D_tls) debug_printf("Calling SSL_connect\n");
sigalrm_seen = FALSE;
-alarm(ob->command_timeout);
-rc = SSL_connect(client_ssl);
-alarm(0);
+ALARM(ob->command_timeout);
+rc = SSL_connect(exim_client_ctx->ssl);
+ALARM_CLR(0);
#ifdef SUPPORT_DANE
-if (tlsa_dnsa)
- DANESSL_cleanup(client_ssl);
+if (conn_args->dane)
+ DANESSL_cleanup(exim_client_ctx->ssl);
#endif
if (rc <= 0)
- return tls_error(US"SSL_connect", host, sigalrm_seen ? US"timed out" : NULL,
- errstr);
+ {
+ tls_error(US"SSL_connect", host, sigalrm_seen ? US"timed out" : NULL, errstr);
+ return FALSE;
+ }
+
+DEBUG(D_tls)
+ {
+ debug_printf("SSL_connect succeeded\n");
+ tls_dump_keylog(exim_client_ctx->ssl);
+ }
+
+#ifndef DISABLE_TLS_RESUME
+tls_client_resume_posthandshake(exim_client_ctx, tlsp);
+#endif
+
+#ifdef EXIM_HAVE_ALPN
+if (ob->tls_alpn) /* We requested. See what was negotiated. */
+ {
+ const uschar * name;
+ unsigned len;
-DEBUG(D_tls) debug_printf("SSL_connect succeeded\n");
+ SSL_get0_alpn_selected(exim_client_ctx->ssl, &name, &len);
+ if (len > 0)
+ { DEBUG(D_tls) debug_printf("ALPN negotiated %u: '%.*s'\n", len, (int)*name, name+1); }
+ else if (verify_check_given_host(CUSS &ob->hosts_require_alpn, host) == OK)
+ {
+ /* Would like to send a relevant fatal Alert, but OpenSSL has no API */
+ tls_error(US"handshake", host, US"ALPN required but not negotiated", errstr);
+ return FALSE;
+ }
+ }
+#endif
-peer_cert(client_ssl, &tls_out, peerdn, sizeof(peerdn));
+#ifdef SSL_get_extms_support
+tlsp->ext_master_secret = SSL_get_extms_support(exim_client_ctx->ssl) == 1;
+#endif
+peer_cert(exim_client_ctx->ssl, tlsp, peerdn, sizeof(peerdn));
-construct_cipher_name(client_ssl, cipherbuf, sizeof(cipherbuf), &tls_out.bits);
-tls_out.cipher = cipherbuf;
+tlsp->ver = tlsver_name(exim_client_ctx->ssl);
+tlsp->cipher = construct_cipher_name(exim_client_ctx->ssl, tlsp->ver, &tlsp->bits);
+tlsp->cipher_stdname = cipher_stdname_ssl(exim_client_ctx->ssl);
/* Record the certificate we presented */
{
- X509 * crt = SSL_get_certificate(client_ssl);
- tls_out.ourcert = crt ? X509_dup(crt) : NULL;
+ X509 * crt = SSL_get_certificate(exim_client_ctx->ssl);
+ tlsp->ourcert = crt ? X509_dup(crt) : NULL;
}
-tls_out.active = fd;
-return OK;
+/*XXX will this work with continued-TLS? */
+/* Channel-binding info for authenticators */
+ {
+ uschar c, * s;
+ size_t len = SSL_get_finished(exim_client_ctx->ssl, &c, 0);
+ int old_pool = store_pool;
+
+ SSL_get_finished(exim_client_ctx->ssl, s = store_get((int)len, TRUE), len);
+ store_pool = POOL_PERM;
+ tlsp->channelbinding = b64encode_taint(CUS s, (int)len, TRUE);
+ store_pool = old_pool;
+ DEBUG(D_tls) debug_printf("Have channel bindings cached for possible auth usage %p %p\n", tlsp->channelbinding, tlsp);
+ }
+
+tlsp->active.sock = cctx->sock;
+tlsp->active.tls_ctx = exim_client_ctx;
+cctx->tls_ctx = exim_client_ctx;
+return TRUE;
}
static BOOL
tls_refill(unsigned lim)
{
+SSL * ssl = state_server.lib_state.lib_ssl;
int error;
int inbytes;
-DEBUG(D_tls) debug_printf("Calling SSL_read(%p, %p, %u)\n", server_ssl,
+DEBUG(D_tls) debug_printf("Calling SSL_read(%p, %p, %u)\n", ssl,
ssl_xfer_buffer, ssl_xfer_buffer_size);
-if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
-inbytes = SSL_read(server_ssl, CS ssl_xfer_buffer,
+ERR_clear_error();
+if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
+inbytes = SSL_read(ssl, CS ssl_xfer_buffer,
MIN(ssl_xfer_buffer_size, lim));
-error = SSL_get_error(server_ssl, inbytes);
-alarm(0);
+error = SSL_get_error(ssl, inbytes);
+if (smtp_receive_timeout > 0) ALARM_CLR(0);
+
+if (had_command_timeout) /* set by signal handler */
+ smtp_command_timeout_exit(); /* does not return */
+if (had_command_sigterm)
+ smtp_command_sigterm_exit();
+if (had_data_timeout)
+ smtp_data_timeout_exit();
+if (had_data_sigint)
+ smtp_data_sigint_exit();
/* SSL_ERROR_ZERO_RETURN appears to mean that the SSL session has been
closed down, not that the socket itself has been closed down. Revert to
non-SSL handling. */
-if (error == SSL_ERROR_ZERO_RETURN)
+switch(error)
{
- DEBUG(D_tls) debug_printf("Got SSL_ERROR_ZERO_RETURN\n");
+ case SSL_ERROR_NONE:
+ break;
- receive_getc = smtp_getc;
- receive_getbuf = smtp_getbuf;
- receive_get_cache = smtp_get_cache;
- receive_ungetc = smtp_ungetc;
- receive_feof = smtp_feof;
- receive_ferror = smtp_ferror;
- receive_smtp_buffered = smtp_buffered;
-
- if (SSL_get_shutdown(server_ssl) == SSL_RECEIVED_SHUTDOWN)
- SSL_shutdown(server_ssl);
-
- sk_X509_pop_free(server_static_cbinfo->verify_stack, X509_free);
- SSL_free(server_ssl);
- SSL_CTX_free(server_ctx);
- server_static_cbinfo->verify_stack = NULL;
- server_ctx = NULL;
- server_ssl = NULL;
- tls_in.active = -1;
- tls_in.bits = 0;
- tls_in.cipher = NULL;
- tls_in.peerdn = NULL;
- tls_in.sni = NULL;
+ case SSL_ERROR_ZERO_RETURN:
+ DEBUG(D_tls) debug_printf("Got SSL_ERROR_ZERO_RETURN\n");
- return FALSE;
- }
+ if (SSL_get_shutdown(ssl) == SSL_RECEIVED_SHUTDOWN)
+ SSL_shutdown(ssl);
-/* Handle genuine errors */
+ tls_close(NULL, TLS_NO_SHUTDOWN);
+ return FALSE;
-else if (error == SSL_ERROR_SSL)
- {
- ERR_error_string(ERR_get_error(), ssl_errstring);
- log_write(0, LOG_MAIN, "TLS error (SSL_read): %s", ssl_errstring);
- ssl_xfer_error = TRUE;
- return FALSE;
- }
+ /* Handle genuine errors */
+ case SSL_ERROR_SSL:
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ log_write(0, LOG_MAIN, "TLS error (SSL_read): %s", ssl_errstring);
+ ssl_xfer_error = TRUE;
+ return FALSE;
-else if (error != SSL_ERROR_NONE)
- {
- DEBUG(D_tls) debug_printf("Got SSL error %d\n", error);
- ssl_xfer_error = TRUE;
- return FALSE;
+ default:
+ DEBUG(D_tls) debug_printf("Got SSL error %d\n", error);
+ DEBUG(D_tls) if (error == SSL_ERROR_SYSCALL)
+ debug_printf(" - syscall %s\n", strerror(errno));
+ ssl_xfer_error = TRUE;
+ return FALSE;
}
#ifndef DISABLE_DKIM
return ssl_xfer_buffer[ssl_xfer_buffer_lwm++];
}
+BOOL
+tls_hasc(void)
+{
+return ssl_xfer_buffer_lwm < ssl_xfer_buffer_hwm;
+}
+
uschar *
tls_getbuf(unsigned * len)
{
void
-tls_get_cache()
+tls_get_cache(unsigned lim)
{
#ifndef DISABLE_DKIM
int n = ssl_xfer_buffer_hwm - ssl_xfer_buffer_lwm;
+debug_printf("tls_get_cache\n");
+if (n > lim)
+ n = lim;
if (n > 0)
dkim_exim_verify_feed(ssl_xfer_buffer+ssl_xfer_buffer_lwm, n);
#endif
BOOL
-tls_could_read(void)
+tls_could_getc(void)
{
-return ssl_xfer_buffer_lwm < ssl_xfer_buffer_hwm || SSL_pending(server_ssl) > 0;
+return ssl_xfer_buffer_lwm < ssl_xfer_buffer_hwm
+ || SSL_pending(state_server.lib_state.lib_ssl) > 0;
}
/*
Arguments:
+ ct_ctx client context pointer, or NULL for the one global server context
buff buffer of data
len size of buffer
Returns: the number of bytes read
- -1 after a failed read
+ -1 after a failed read, including EOF
Only used by the client-side TLS.
*/
int
-tls_read(BOOL is_server, uschar *buff, size_t len)
+tls_read(void * ct_ctx, uschar *buff, size_t len)
{
-SSL *ssl = is_server ? server_ssl : client_ssl;
+SSL * ssl = ct_ctx ? ((exim_openssl_client_tls_ctx *)ct_ctx)->ssl
+ : state_server.lib_state.lib_ssl;
int inbytes;
int error;
DEBUG(D_tls) debug_printf("Calling SSL_read(%p, %p, %u)\n", ssl,
buff, (unsigned int)len);
+ERR_clear_error();
inbytes = SSL_read(ssl, CS buff, len);
error = SSL_get_error(ssl, inbytes);
/*
Arguments:
- is_server channel specifier
+ ct_ctx client context pointer, or NULL for the one global server context
buff buffer of data
len number of bytes
more further data expected soon
Returns: the number of bytes after a successful write,
-1 after a failed write
-Used by both server-side and client-side TLS.
+Used by both server-side and client-side TLS. Calling with len zero and more unset
+will flush buffered writes; buff can be null for this case.
*/
int
-tls_write(BOOL is_server, const uschar *buff, size_t len, BOOL more)
+tls_write(void * ct_ctx, const uschar * buff, size_t len, BOOL more)
{
-int outbytes, error, left;
-SSL *ssl = is_server ? server_ssl : client_ssl;
-static gstring * corked = NULL;
+size_t olen = len;
+int outbytes, error;
+SSL * ssl = ct_ctx
+ ? ((exim_openssl_client_tls_ctx *)ct_ctx)->ssl
+ : state_server.lib_state.lib_ssl;
+static gstring * server_corked = NULL;
+gstring ** corkedp = ct_ctx
+ ? &((exim_openssl_client_tls_ctx *)ct_ctx)->corked : &server_corked;
+gstring * corked = *corkedp;
DEBUG(D_tls) debug_printf("%s(%p, %lu%s)\n", __FUNCTION__,
buff, (unsigned long)len, more ? ", more" : "");
/* Lacking a CORK or MSG_MORE facility (such as GnuTLS has) we copy data when
"more" is notified. This hack is only ok if small amounts are involved AND only
one stream does it, in one context (i.e. no store reset). Currently it is used
-for the responses to the received SMTP MAIL , RCPT, DATA sequence, only. */
-
-if (is_server && (more || corked))
+for the responses to the received SMTP MAIL , RCPT, DATA sequence, only.
+We support callouts done by the server process by using a separate client
+context for the stashed information. */
+/* + if PIPE_COMMAND, banner & ehlo-resp for smmtp-on-connect. Suspect there's
+a store reset there, so use POOL_PERM. */
+/* + if CHUNKING, cmds EHLO,MAIL,RCPT(s),BDAT */
+
+if (more || corked)
{
+ if (!len) buff = US &error; /* dummy just so that string_catn is ok */
+
+ int save_pool = store_pool;
+ store_pool = POOL_PERM;
+
corked = string_catn(corked, buff, len);
+
+ store_pool = save_pool;
+
if (more)
+ {
+ *corkedp = corked;
return len;
+ }
buff = CUS corked->s;
len = corked->ptr;
- corked = NULL;
+ *corkedp = NULL;
}
-for (left = len; left > 0;)
+for (int left = len; left > 0;)
{
- DEBUG(D_tls) debug_printf("SSL_write(SSL, %p, %d)\n", buff, left);
+ DEBUG(D_tls) debug_printf("SSL_write(%p, %p, %d)\n", ssl, buff, left);
+ ERR_clear_error();
outbytes = SSL_write(ssl, CS buff, left);
error = SSL_get_error(ssl, outbytes);
DEBUG(D_tls) debug_printf("outbytes=%d error=%d\n", outbytes, error);
switch (error)
{
- case SSL_ERROR_SSL:
- ERR_error_string(ERR_get_error(), ssl_errstring);
- log_write(0, LOG_MAIN, "TLS error (SSL_write): %s", ssl_errstring);
- return -1;
-
- case SSL_ERROR_NONE:
+ case SSL_ERROR_NONE: /* the usual case */
left -= outbytes;
buff += outbytes;
break;
+ case SSL_ERROR_SSL:
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ log_write(0, LOG_MAIN, "TLS error (SSL_write): %s", ssl_errstring);
+ return -1;
+
case SSL_ERROR_ZERO_RETURN:
log_write(0, LOG_MAIN, "SSL channel closed on write");
return -1;
case SSL_ERROR_SYSCALL:
- log_write(0, LOG_MAIN, "SSL_write: (from %s) syscall: %s",
- sender_fullhost ? sender_fullhost : US"<unknown>",
- strerror(errno));
+ if (ct_ctx || errno != ECONNRESET || !f.smtp_in_quit)
+ log_write(0, LOG_MAIN, "SSL_write: (from %s) syscall: %s",
+ sender_fullhost ? sender_fullhost : US"<unknown>",
+ strerror(errno));
+ else if (LOGGING(protocol_detail))
+ log_write(0, LOG_MAIN, "[%s] after QUIT, client reset TCP before"
+ " SMTP response and TLS close\n", sender_host_address);
+ else
+ DEBUG(D_tls) debug_printf("[%s] SSL_write: after QUIT,"
+ " client reset TCP before TLS close\n", sender_host_address);
return -1;
default:
return -1;
}
}
-return len;
+return olen;
}
+/*
+Arguments:
+ ct_ctx client TLS context pointer, or NULL for the one global server context
+*/
+
+void
+tls_shutdown_wr(void * ct_ctx)
+{
+exim_openssl_client_tls_ctx * o_ctx = ct_ctx;
+SSL ** sslp = o_ctx ? &o_ctx->ssl : (SSL **) &state_server.lib_state.lib_ssl;
+int * fdp = o_ctx ? &tls_out.active.sock : &tls_in.active.sock;
+int rc;
+
+if (*fdp < 0) return; /* TLS was not active */
+
+tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
+
+HDEBUG(D_transport|D_tls|D_acl|D_v) debug_printf_indent(" SMTP(TLS shutdown)>>\n");
+rc = SSL_shutdown(*sslp);
+if (rc < 0) DEBUG(D_tls)
+ {
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ debug_printf("SSL_shutdown: %s\n", ssl_errstring);
+ }
+}
+
/*************************************************
* Close down a TLS session *
*************************************************/
would tamper with the SSL session in the parent process).
Arguments:
- shutdown 1 if TLS close-alert is to be sent,
+ ct_ctx client TLS context pointer, or NULL for the one global server context
+ do_shutdown 0 no data-flush or TLS close-alert
+ 1 if TLS close-alert is to be sent,
2 if also response to be waited for
Returns: nothing
*/
void
-tls_close(BOOL is_server, int shutdown)
+tls_close(void * ct_ctx, int do_shutdown)
{
-SSL_CTX **ctxp = is_server ? &server_ctx : &client_ctx;
-SSL **sslp = is_server ? &server_ssl : &client_ssl;
-int *fdp = is_server ? &tls_in.active : &tls_out.active;
+exim_openssl_client_tls_ctx * o_ctx = ct_ctx;
+SSL ** sslp = o_ctx ? &o_ctx->ssl : (SSL **) &state_server.lib_state.lib_ssl;
+int * fdp = o_ctx ? &tls_out.active.sock : &tls_in.active.sock;
if (*fdp < 0) return; /* TLS was not active */
-if (shutdown)
+if (do_shutdown)
{
int rc;
DEBUG(D_tls) debug_printf("tls_close(): shutting down TLS%s\n",
- shutdown > 1 ? " (with response-wait)" : "");
+ do_shutdown > 1 ? " (with response-wait)" : "");
+
+ tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
if ( (rc = SSL_shutdown(*sslp)) == 0 /* send "close notify" alert */
- && shutdown > 1)
+ && do_shutdown > 1)
{
- alarm(2);
+#ifdef EXIM_TCP_CORK
+ (void) setsockopt(*fdp, IPPROTO_TCP, EXIM_TCP_CORK, US &off, sizeof(off));
+#endif
+ ALARM(2);
rc = SSL_shutdown(*sslp); /* wait for response */
- alarm(0);
+ ALARM_CLR(0);
}
if (rc < 0) DEBUG(D_tls)
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
debug_printf("SSL_shutdown: %s\n", ssl_errstring);
}
}
-if (is_server)
+if (!o_ctx) /* server side */
{
- sk_X509_pop_free(server_static_cbinfo->verify_stack, X509_free);
- server_static_cbinfo->verify_stack = NULL;
+#ifndef DISABLE_OCSP
+ sk_X509_pop_free(state_server.verify_stack, X509_free);
+ state_server.verify_stack = NULL;
+#endif
+
+ receive_getc = smtp_getc;
+ receive_getbuf = smtp_getbuf;
+ receive_get_cache = smtp_get_cache;
+ receive_hasc = smtp_hasc;
+ receive_ungetc = smtp_ungetc;
+ receive_feof = smtp_feof;
+ receive_ferror = smtp_ferror;
+ tls_in.active.tls_ctx = NULL;
+ tls_in.sni = NULL;
+ /* Leave bits, peercert, cipher, peerdn, certificate_verified set, for logging */
}
-SSL_CTX_free(*ctxp);
SSL_free(*sslp);
-*ctxp = NULL;
*sslp = NULL;
*fdp = -1;
}
SSL_CTX *ctx;
uschar *s, *expciphers, *err;
-/* this duplicates from tls_init(), we need a better "init just global
-state, for no specific purpose" singleton function of our own */
-
-SSL_load_error_strings();
-OpenSSL_add_ssl_algorithms();
-#if (OPENSSL_VERSION_NUMBER >= 0x0090800fL) && !defined(OPENSSL_NO_SHA256)
-/* SHA256 is becoming ever more popular. This makes sure it gets added to the
-list of available digests. */
-EVP_add_digest(EVP_sha256());
-#endif
+tls_openssl_init();
if (!(tls_require_ciphers && *tls_require_ciphers))
return NULL;
if (!(expciphers && *expciphers))
return NULL;
-/* normalisation ripped from above */
-s = expciphers;
-while (*s != 0) { if (*s == '_') *s = '-'; s++; }
+normalise_ciphers(&expciphers, tls_require_ciphers);
err = NULL;
-
-ctx = SSL_CTX_new(SSLv23_server_method());
-if (!ctx)
+if (lib_ctx_new(&ctx, NULL, &err) == OK)
{
- ERR_error_string(ERR_get_error(), ssl_errstring);
- return string_sprintf("SSL_CTX_new() failed: %s", ssl_errstring);
- }
+ DEBUG(D_tls)
+ debug_printf("tls_require_ciphers expands to \"%s\"\n", expciphers);
-DEBUG(D_tls)
- debug_printf("tls_require_ciphers expands to \"%s\"\n", expciphers);
+ if (!SSL_CTX_set_cipher_list(ctx, CS expciphers))
+ {
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ err = string_sprintf("SSL_CTX_set_cipher_list(%s) failed: %s",
+ expciphers, ssl_errstring);
+ }
-if (!SSL_CTX_set_cipher_list(ctx, CS expciphers))
- {
- ERR_error_string(ERR_get_error(), ssl_errstring);
- err = string_sprintf("SSL_CTX_set_cipher_list(%s) failed: %s",
- expciphers, ssl_errstring);
+ SSL_CTX_free(ctx);
}
-
-SSL_CTX_free(ctx);
-
return err;
}
will change, so we can more usefully assist with version diagnosis by also
reporting the build date.
-Arguments: a FILE* to print the results to
-Returns: nothing
+Arguments: string to append to
+Returns: string
*/
-void
-tls_version_report(FILE *f)
+gstring *
+tls_version_report(gstring * g)
{
-fprintf(f, "Library version: OpenSSL: Compile: %s\n"
- " Runtime: %s\n"
- " : %s\n",
- OPENSSL_VERSION_TEXT,
- SSLeay_version(SSLEAY_VERSION),
- SSLeay_version(SSLEAY_BUILT_ON));
-/* third line is 38 characters for the %s and the line is 73 chars long;
-the OpenSSL output includes a "built on: " prefix already. */
+return string_fmt_append(g,
+ "Library version: OpenSSL: Compile: %s\n"
+ " Runtime: %s\n"
+ " : %s\n",
+ OPENSSL_VERSION_TEXT,
+ SSLeay_version(SSLEAY_VERSION),
+ SSLeay_version(SSLEAY_BUILT_ON));
+ /* third line is 38 characters for the %s and the line is 73 chars long;
+ the OpenSSL output includes a "built on: " prefix already. */
}
int i, needed_len;
static pid_t pidlast = 0;
pid_t pidnow;
-uschar *p;
uschar smallbuf[sizeof(r)];
if (max <= 1)
}
r = 0;
-for (p = smallbuf; needed_len; --needed_len, ++p)
- {
- r *= 256;
- r += *p;
- }
+for (uschar * p = smallbuf; needed_len; --needed_len, ++p)
+ r = 256 * r + *p;
/* We don't particularly care about weighted results; if someone wants
smooth distribution and cares enough then they should submit a patch then. */
Returns success or failure in parsing
*/
-struct exim_openssl_option {
- uschar *name;
- long value;
-};
-/* We could use a macro to expand, but we need the ifdef and not all the
-options document which version they were introduced in. Policylet: include
-all options unless explicitly for DTLS, let the administrator choose which
-to apply.
-
-This list is current as of:
- ==> 1.0.1b <==
-Plus SSL_OP_SAFARI_ECDHE_ECDSA_BUG from 2013-June patch/discussion on openssl-dev
-*/
-static struct exim_openssl_option exim_openssl_options[] = {
-/* KEEP SORTED ALPHABETICALLY! */
-#ifdef SSL_OP_ALL
- { US"all", SSL_OP_ALL },
-#endif
-#ifdef SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
- { US"allow_unsafe_legacy_renegotiation", SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION },
-#endif
-#ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
- { US"cipher_server_preference", SSL_OP_CIPHER_SERVER_PREFERENCE },
-#endif
-#ifdef SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
- { US"dont_insert_empty_fragments", SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS },
-#endif
-#ifdef SSL_OP_EPHEMERAL_RSA
- { US"ephemeral_rsa", SSL_OP_EPHEMERAL_RSA },
-#endif
-#ifdef SSL_OP_LEGACY_SERVER_CONNECT
- { US"legacy_server_connect", SSL_OP_LEGACY_SERVER_CONNECT },
-#endif
-#ifdef SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER
- { US"microsoft_big_sslv3_buffer", SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER },
-#endif
-#ifdef SSL_OP_MICROSOFT_SESS_ID_BUG
- { US"microsoft_sess_id_bug", SSL_OP_MICROSOFT_SESS_ID_BUG },
-#endif
-#ifdef SSL_OP_MSIE_SSLV2_RSA_PADDING
- { US"msie_sslv2_rsa_padding", SSL_OP_MSIE_SSLV2_RSA_PADDING },
-#endif
-#ifdef SSL_OP_NETSCAPE_CHALLENGE_BUG
- { US"netscape_challenge_bug", SSL_OP_NETSCAPE_CHALLENGE_BUG },
-#endif
-#ifdef SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG
- { US"netscape_reuse_cipher_change_bug", SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG },
-#endif
-#ifdef SSL_OP_NO_COMPRESSION
- { US"no_compression", SSL_OP_NO_COMPRESSION },
-#endif
-#ifdef SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
- { US"no_session_resumption_on_renegotiation", SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION },
-#endif
-#ifdef SSL_OP_NO_SSLv2
- { US"no_sslv2", SSL_OP_NO_SSLv2 },
-#endif
-#ifdef SSL_OP_NO_SSLv3
- { US"no_sslv3", SSL_OP_NO_SSLv3 },
-#endif
-#ifdef SSL_OP_NO_TICKET
- { US"no_ticket", SSL_OP_NO_TICKET },
-#endif
-#ifdef SSL_OP_NO_TLSv1
- { US"no_tlsv1", SSL_OP_NO_TLSv1 },
-#endif
-#ifdef SSL_OP_NO_TLSv1_1
-#if SSL_OP_NO_TLSv1_1 == 0x00000400L
- /* Error in chosen value in 1.0.1a; see first item in CHANGES for 1.0.1b */
-#warning OpenSSL 1.0.1a uses a bad value for SSL_OP_NO_TLSv1_1, ignoring
-#else
- { US"no_tlsv1_1", SSL_OP_NO_TLSv1_1 },
-#endif
-#endif
-#ifdef SSL_OP_NO_TLSv1_2
- { US"no_tlsv1_2", SSL_OP_NO_TLSv1_2 },
-#endif
-#ifdef SSL_OP_SAFARI_ECDHE_ECDSA_BUG
- { US"safari_ecdhe_ecdsa_bug", SSL_OP_SAFARI_ECDHE_ECDSA_BUG },
-#endif
-#ifdef SSL_OP_SINGLE_DH_USE
- { US"single_dh_use", SSL_OP_SINGLE_DH_USE },
-#endif
-#ifdef SSL_OP_SINGLE_ECDH_USE
- { US"single_ecdh_use", SSL_OP_SINGLE_ECDH_USE },
-#endif
-#ifdef SSL_OP_SSLEAY_080_CLIENT_DH_BUG
- { US"ssleay_080_client_dh_bug", SSL_OP_SSLEAY_080_CLIENT_DH_BUG },
-#endif
-#ifdef SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG
- { US"sslref2_reuse_cert_type_bug", SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG },
-#endif
-#ifdef SSL_OP_TLS_BLOCK_PADDING_BUG
- { US"tls_block_padding_bug", SSL_OP_TLS_BLOCK_PADDING_BUG },
-#endif
-#ifdef SSL_OP_TLS_D5_BUG
- { US"tls_d5_bug", SSL_OP_TLS_D5_BUG },
-#endif
-#ifdef SSL_OP_TLS_ROLLBACK_BUG
- { US"tls_rollback_bug", SSL_OP_TLS_ROLLBACK_BUG },
-#endif
-};
-static int exim_openssl_options_size =
- sizeof(exim_openssl_options)/sizeof(struct exim_openssl_option);
static BOOL
tls_openssl_options_parse(uschar *option_spec, long *results)
{
long result, item;
-uschar *s, *end;
-uschar keep_c;
+uschar * exp, * end;
BOOL adding, item_parsed;
+/* Server: send no (<= TLS1.2) session tickets */
result = SSL_OP_NO_TICKET;
+
/* Prior to 4.80 we or'd in SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS; removed
- * from default because it increases BEAST susceptibility. */
+from default because it increases BEAST susceptibility. */
#ifdef SSL_OP_NO_SSLv2
result |= SSL_OP_NO_SSLv2;
#endif
+#ifdef SSL_OP_NO_SSLv3
+result |= SSL_OP_NO_SSLv3;
+#endif
#ifdef SSL_OP_SINGLE_DH_USE
result |= SSL_OP_SINGLE_DH_USE;
#endif
+#ifdef SSL_OP_NO_RENEGOTIATION
+result |= SSL_OP_NO_RENEGOTIATION;
+#endif
if (!option_spec)
{
return TRUE;
}
-for (s=option_spec; *s != '\0'; /**/)
+if (!expand_check(option_spec, US"openssl_options", &exp, &end))
+ return FALSE;
+
+for (uschar * s = exp; *s; /**/)
{
while (isspace(*s)) ++s;
if (*s == '\0')
return FALSE;
}
adding = *s++ == '+';
- for (end = s; (*end != '\0') && !isspace(*end); ++end) /**/ ;
- keep_c = *end;
- *end = '\0';
- item_parsed = tls_openssl_one_option_parse(s, &item);
- *end = keep_c;
+ for (end = s; *end && !isspace(*end); ) end++;
+ item_parsed = tls_openssl_one_option_parse(string_copyn(s, end-s), &item);
if (!item_parsed)
{
DEBUG(D_tls) debug_printf("openssl option setting unrecognised: \"%s\"\n", s);
return FALSE;
}
- DEBUG(D_tls) debug_printf("openssl option, %s from %lx: %lx (%s)\n",
- adding ? "adding" : "removing", result, item, s);
+ DEBUG(D_tls) debug_printf("openssl option, %s %08lx: %08lx (%s)\n",
+ adding ? "adding to " : "removing from", result, item, s);
if (adding)
result |= item;
else
return TRUE;
}
+#endif /*!MACRO_PREDEF*/
/* vi: aw ai sw=2
*/
/* End of tls-openssl.c */
git://git.exim.org / exim.git / blobdiff