The "spam" ACL condition code contained a sscanf() call with a %s

[exim.git] / doc / doc-txt / NewStuff

diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index 2df222c99f729e86149b003daad3c74faaec0490..fa86b1e07894b17fbc8d5b6aca941e9e54f1e535 100644 (file)
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -1,179 +1,257 @@
-$Cambridge: exim/doc/doc-txt/NewStuff,v 1.38 2005/04/28 13:29:27 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/NewStuff,v 1.146 2007/04/17 13:06:10 ph10 Exp $

 
 New Features in Exim
 --------------------
 
 
 New Features in Exim
 --------------------
 

-This file contains descriptions of new features that have been added to Exim,
-but have not yet made it into the main manual (which is most conveniently
-updated when there is a relatively large batch of changes). The doc/ChangeLog
-file contains a listing of all changes, including bug fixes.
+This file contains descriptions of new features that have been added to Exim.
+Before a formal release, there may be quite a lot of detail so that people can
+test from the snapshots or the CVS before the documentation is updated. Once
+the documentation is updated, this file is reduced to a short list.

 
 

+Version 4.67
+------------
+
+ 1. There is a new log selector called smtp_no_mail, which is not included in
+    the default setting. When it is set, a line is written to the main log
+    whenever an accepted SMTP connection terminates without having issued a
+    MAIL command.
+
+ 2. When an item in a dnslists list is followed by = and & and a list of IP
+    addresses, the behaviour was not clear when the lookup returned more than
+    one IP address. This has been solved by the addition of == and =& for "all"
+    rather than the defaule "any" matching.
+
+ 3. Up till now, the only control over which cipher suites GnuTLS uses has been
+    for the cipher algorithms. New options have been added to allow some of the
+    other parameters to be varied.
+
+ 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is
+    set, Exim compiles a runtime option called disable_fsync.
+
+ 5. There is a new variable called $smtp_count_at_connection_start.
+
+ 6. There's a new control called no_pipelining.
+
+ 7. There are two new variables called $sending_ip_address and $sending_port.
+    These are set whenever an SMTP connection to another host has been set up.
+
+ 8. The expansion of the helo_data option in the smtp transport now happens
+    after the connection to the server has been made.
+
+ 9. There is a new expansion operator ${rfc2047d: that decodes strings that
+    are encoded as per RFC 2047.
+
+10. There is a new log selector called "pid", which causes the current process
+    id to be added to every log line, in square brackets, immediately after the
+    time and date.
+
+11. Exim has been modified so that it flushes SMTP output before implementing
+    a delay in an ACL. It also flushes the output before performing a callout,
+    as this can take a substantial time. These behaviours can be disabled by
+    obeying control = no_delay_flush or control = no_callout_flush,
+    respectively, at some earlier stage of the connection.
+
+12. There are two new expansion conditions that iterate over a list. They are
+    called forany and forall.
+
+13. There's a new global option called dsn_from that can be used to vary the
+    contents of From: lines in bounces and other automatically generated
+    messages ("delivery status notifications" - hence the name of the option).
+
+14. The smtp transport has a new option called hosts_avoid_pipelining.
+
+15. By default, exigrep does case-insensitive matches. There is now a -I option
+    that makes it case-sensitive.
+
+16. A number of new features ("addresses", "map", "filter", and "reduce") have
+    been added to string expansions to make it easier to process lists of
+    items, typically addresses.
+
+17. There's a new ACL modifier called "continue". It does nothing of itself,
+    and processing of the ACL always continues with the next condition or
+    modifier. It is provided so that the side effects of expanding its argument
+    can be used.
+
+18. It is now possible to use newline and other control characters (those with
+    values less than 32, plus DEL) as separators in lists.
+
+19. The exigrep utility now has a -v option, which inverts the matching
+    condition.

 
 

-Version 4.51
+20. The host_find_failed option in the manualroute router can now be set to
+    "ignore".
+
+
+Version 4.66
+------------
+
+No new features were added to 4.66.
+
+
+Version 4.65

 ------------
 
 ------------
 

-PH/01 The format in which GnuTLS parameters are written to the gnutls-param
-      file in the spool directory has been changed. This change has been made
-      to alleviate problems that some people had with the generation of the
-      parameters by Exim when /dev/random was exhausted. In this situation,
-      Exim would hang until /dev/random acquired some more entropy.
+No new features were added to 4.65.

 
 

-      The new code exports and imports the DH and RSA parameters in PEM
-      format. This means that the parameters can be generated externally using
-      the certtool command that is part of GnuTLS.

 
 

-      To replace the parameters with new ones, instead of deleting the file
-      and letting Exim re-create it, you can generate new parameters using
-      certtool and, when this has been done, replace Exim's cache file by
-      renaming. The relevant commands are something like this:
+Version 4.64
+------------

 
 

-        # rm -f new.params
-        # touch new.params
-        # chown exim:exim new.params
-        # chmod 0400 new.params
-        # certtool --generate-privkey --bits 512 >new.params
-        # echo "" >>new.params
-        # certtool --generate-dh-params --bits 1024 >> new.params
-        # mv new.params params
+ 1. ACL variables can now be given arbitrary names, as long as they start with
+    "acl_c" or "acl_m" (for connection variables and message variables), are at
+    least six characters long, with the sixth character being either a digit or
+    an underscore.

 
 

-      If Exim never has to generate the parameters itself, the possibility of
-      stalling is removed.
+ 2. There is a new ACL modifier called log_reject_target. It makes it possible
+    to specify which logs are used for messages about ACL rejections.

 
 

-PH/02 A new expansion item for dynamically loading and calling a locally-
-      written C function is now provided, if Exim is compiled with
+ 3. There is a new authenticator called "dovecot". This is an interface to the
+    authentication facility of the Dovecot POP/IMAP server, which can support a
+    number of authentication methods.

 
 

-        EXPAND_DLFUNC=yes
+ 4. The variable $message_headers_raw provides a concatenation of all the
+    messages's headers without any decoding. This is in contrast to
+    $message_headers, which does RFC2047 decoding on the header contents.

 
 

-      set in Local/Makefile. The facility is not included by default (a
-      suitable error is given if you try to use it when it is not there.)
+ 5. In a DNS black list, if two domain names, comma-separated, are given, the
+    second is used first to do an initial check, making use of any IP value
+    restrictions that are set. If there is a match, the first domain is used,
+    without any IP value restrictions, to get the TXT record.

 
 

-      If you enable EXPAND_DLFUNC, you should also be aware of the new redirect
-      router option forbid_filter_dlfunc. If you have unprivileged users on
-      your system who are permitted to create filter files, you might want to
-      set forbid_filter_dlfunc=true in the appropriate router, to stop them
-      using ${dlfunc to run code within Exim.
+ 6. All authenticators now have a server_condition option.

 
 

-      You load and call an external function like this:
-
-        ${dlfunc{/some/file}{function}{arg1}{arg2}...}
-
-      Once loaded, Exim remembers the dynamically loaded object so that it
-      doesn't reload the same object file in the same Exim process (but of
-      course Exim does start new processes frequently).
-
-      There may be from zero to eight arguments to the function. When compiling
-      a local function that is to be called in this way, local_scan.h should be
-      included. The Exim variables and functions that are defined by that API
-      are also available for dynamically loaded functions. The function itself
-      must have the following type:
-
-        int dlfunction(uschar **yield, int argc, uschar *argv[])
-
-      Where "uschar" is a typedef for "unsigned char" in local_scan.h. The
-      function should return one of the following values:
+ 7. There is a new command-line option called -Mset. It is useful only in
+    conjunction with -be (that is, when testing string expansions). It must be
+    followed by a message id; Exim loads the given message from its spool
+    before doing the expansions.

 
 

-      OK            Success. The string that is placed in "yield" is put into
-                    the expanded string that is being built.
+ 8. Another similar new command-line option is called -bem. It operates like
+    -be except that it must be followed by the name of a file that contains a
+    message.

 
 

-      FAIL          A non-forced expansion failure occurs, with the error
-                    message taken from "yield", if it is set.
+ 9. When an address is delayed because of a 4xx response to a RCPT command, it
+    is now the combination of sender and recipient that is delayed in
+    subsequent queue runs until its retry time is reached.

 
 

-      FAIL_FORCED   A forced expansion failure occurs, with the error message
-                    taken from "yield" if it is set.
+10. Unary negation and the bitwise logical operators and, or, xor, not, and
+    shift, have been added to the eval: and eval10: expansion items.

 
 

-      ERROR         Same as FAIL, except that a panic log entry is written.
+11. The variables $interface_address and $interface_port have been renamed
+    as $received_ip_address and $received_port, to make it clear that they
+    relate to message reception rather than delivery. (The old names remain
+    available for compatibility.)

 
 

-      When compiling a function that is to be used in this way with gcc,
-      you need to add -shared to the gcc command. Also, in the Exim build-time
-      configuration, you must add -export-dynamic to EXTRALIBS.
+12. The "message" modifier can now be used on "accept" and "discard" acl verbs
+    to vary the message that is sent when an SMTP command is accepted.

 
 

-TF/01 $received_time is a new expansion variable containing the time and date
-      as a number of seconds since the start of the Unix epoch when the
-      current message was received.

 
 

-PH/03 There is a new value for RADIUS_LIB_TYPE that can be set in
-      Local/Makefile. It is RADIUSCLIENTNEW, and it requests that the new API,
-      in use from radiusclient 0.4.0 onwards, be used. It does not appear to be
-      possible to detect the different versions automatically.
+Version 4.63
+------------

 
 

-PH/04 There is a new option called acl_not_smtp_mime that allows you to scan
-      MIME parts in non-SMTP messages. It operates in exactly the same way as
-      acl_smtp_mime
+1. There is a new Boolean option called filter_prepend_home for the redirect
+   router.
+
+2. There is a new acl, set by acl_not_smtp_start, which is run right at the
+   start of receiving a non-SMTP message, before any of the message has been
+   read.
+
+3. When an SMTP error message is specified in a "message" modifier in an ACL,
+   or in a :fail: or :defer: message in a redirect router, Exim now checks the
+   start of the message for an SMTP error code.
+
+4. There is a new parameter for LDAP lookups called "referrals", which takes
+   one of the settings "follow" (the default) or "nofollow".
+
+5. Version 20070721.2 of exipick now included, offering these new options:
+    --reverse
+        After all other sorting options have bee processed, reverse order
+        before displaying messages (-R is synonym).
+    --random
+        Randomize order of matching messages before displaying.
+    --size
+        Instead of displaying the matching messages, display the sum
+        of their sizes.
+    --sort <variable>[,<variable>...]
+        Before displaying matching messages, sort the messages according to
+        each messages value for each variable.
+    --not
+        Negate the value for every test (returns inverse output from the
+        same criteria without --not).
+
+
+Version 4.62
+------------

 
 

-PH/05 It is now possible to redefine a macro within the configuration file.
-      The macro must have been previously defined within the configuration (or
-      an included file). A definition on the command line using the -D option
-      causes all definitions and redefinitions within the file to be ignored.
-      In other words, -D overrides any values that are set in the file.
-      Redefinition is specified by using '==' instead of '='. For example:
+1. The ${readsocket expansion item now supports Internet domain sockets as well
+   as Unix domain sockets. If the first argument begins "inet:", it must be of
+   the form "inet:host:port". The port is mandatory; it may be a number or the
+   name of a TCP port in /etc/services. The host may be a name, or it may be an
+   IP address. An ip address may optionally be enclosed in square brackets.
+   This is best for IPv6 addresses. For example:

 
 

-        MAC1 =  initial value
-        ...
-        MAC1 == updated value
+     ${readsocket{inet:[::1]:1234}{<request data>}...

 
 

-      Redefinition does not alter the order in which the macros are applied to
-      the subsequent lines of the configuration file. It is still the same
-      order in which the macros were originally defined. All that changes is
-      the macro's value. Redefinition makes it possible to accumulate values.
-      For example:
+   Only a single host name may be given, but if looking it up yield more than
+   one IP address, they are each tried in turn until a connection is made. Once
+   a connection has been made, the behaviour is as for ${readsocket with a Unix
+   domain socket.

 
 

-        MAC1 =  initial value
-        ...
-        MAC1 == MAC1 and something added
+2. If a redirect router sets up file or pipe deliveries for more than one
+   incoming address, and the relevant transport has batch_max set greater than
+   one, a batch delivery now occurs.

 
 

-      This can be helpful in situations where the configuration file is built
-      from a number of other files.
+3. The appendfile transport has a new option called maildirfolder_create_regex.
+   Its value is a regular expression. For a maildir delivery, this is matched
+   against the maildir directory; if it matches, Exim ensures that a
+   maildirfolder file is created alongside the new, cur, and tmp directories.

 
 

-PH/06 Macros may now be defined or redefined between router, transport,
-      authenticator, or ACL definitions, as well as in the main part of the
-      configuration. They may not, however, be changed within an individual
-      driver or ACL, or in the local_scan, retry, or rewrite sections of the
-      configuration.

 
 

-PH/07 $acl_verify_message is now set immediately after the failure of a
-      verification in an ACL, and so is available in subsequent modifiers. In
-      particular, the message can be preserved by coding like this:
+Version 4.61
+------------

 
 

-         warn  !verify = sender
-               set acl_m0 = $acl_verify_message
+The documentation is up-to-date for the 4.61 release. Major new features since
+the 4.60 release are:

 
 

-      Previously, $acl_verify_message was set only while expanding "message"
-      and "log_message" when a very denied access.
+. An option called disable_ipv6, to disable the use of IPv6 completely.

 
 

-PH/08 The redirect router has two new options, sieve_useraddress and
-      sieve_subaddress. These are passed to a Sieve filter to specify the :user
-      and :subaddress parts of an address. Both options are unset by default.
-      However, when a Sieve filter is run, if sieve_useraddress is unset, the
-      entire original local part (including any prefix or suffix) is used for
-      :user. An unset subaddress is treated as an empty subaddress.
+. An increase in the number of ACL variables to 20 of each type.

 
 

-PH/09 Quota values can be followed by G as well as K and M.
+. A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1,
+  $2, $3, (though those are still set) because the numeric variables get used
+  for other things in complicated expansions.

 
 

-PH/10 $message_linecount is a new variable that contains the total number of
-      lines in the header and body of the message. Compare $body_linecount,
-      which is the count for the body only. During the DATA and
-      content-scanning ACLs, $message_linecount contains the number of lines
-      received. Before delivery happens (that is, before filters, routers, and
-      transports run) the count is increased to include the Received: header
-      line that Exim standardly adds, and also any other header lines that are
-      added by ACLs. The blank line that separates the message header from the
-      body is not counted. Here is an example of the use of this variable in a
-      DATA ACL:
+. The default for rfc1413_query_timeout has been changed from 30s to 5s.

 
 

-        deny message   = Too many lines in message header
-             condition = \
-               ${if <{250}{${eval: $message_linecount - $body_linecount}}}
+. It is possible to use setclassresources() on some BSD OS to control the
+  resources used in pipe deliveries.

 
 

-      In the MAIL and RCPT ACLs, the value is zero because at that stage the
-      message has not yet been received.
+. A new ACL modifier called add_header, which can be used with any verb.

 
 

-PH/11 In a ${run expansion, the variable $value (which contains the standard
-      output) is now also usable in the "else" string.
+. More errors are detectable in retry rules.

 
 

+There are a number of other additions too.

 
 

-Version 4.50
+
+Version 4.60

 ------------
 
 ------------
 

-The documentation is up-to-date for the 4.50 release.
+The documentation is up-to-date for the 4.60 release. Major new features since
+the 4.50 release are:
+
+. Support for SQLite.
+
+. Support for IGNOREQUOTA in LMTP.
+
+. Extensions to the "submission mode" features.
+
+. Support for Client SMTP Authorization (CSA).
+
+. Support for ratelimiting hosts and users.
+
+. New expansion items to help with the BATV "prvs" scheme.
+
+. A "match_ip" condition, that matches an IP address against a list.
+
+There are many more minor changes.

 
 ****
 
 ****