* Exim - an Internet mail transport agent *
*************************************************/
+/* Copyright (c) The Exim Maintainers 2020 - 2024 */
/* Copyright (c) University of Cambridge 1995 - 2018 */
-/* See the file NOTICE for conditions of use and distribution. */
-
/* Copyright (c) Phil Pennock 2012 */
+/* See the file NOTICE for conditions of use and distribution. */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/* This file provides TLS/SSL support for Exim using the GnuTLS library,
one of the available supported implementations. This file is #included into
#include <gnutls/x509.h>
/* man-page is incorrect, gnutls_rnd() is not in gnutls.h: */
#include <gnutls/crypto.h>
+
/* needed to disable PKCS11 autoload unless requested */
#if GNUTLS_VERSION_NUMBER >= 0x020c00
# include <gnutls/pkcs11.h>
# warning "GnuTLS library version too old; tls:cert event unsupported"
# define DISABLE_EVENT
#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030000
+# define SUPPORT_SELFSIGN /* Uncertain what version is first usable but 2.12.23 is not */
+#endif
#if GNUTLS_VERSION_NUMBER >= 0x030306
# define SUPPORT_CA_DIR
#else
#if GNUTLS_VERSION_NUMBER >= 0x030014
# define SUPPORT_SYSDEFAULT_CABUNDLE
#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030104
+# define GNUTLS_CERT_VFY_STATUS_PRINT
+#endif
#if GNUTLS_VERSION_NUMBER >= 0x030109
# define SUPPORT_CORK
#endif
+#if GNUTLS_VERSION_NUMBER >= 0x03010a
+# define SUPPORT_GNUTLS_SESS_DESC
+#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030300
+# define GNUTLS_AUTO_GLOBAL_INIT
+# define GNUTLS_AUTO_PKCS11_MANUAL
+#endif
+#if (GNUTLS_VERSION_NUMBER >= 0x030404) \
+ || (GNUTLS_VERSION_NUMBER >= 0x030311) && (GNUTLS_VERSION_NUMBER & 0xffff00 == 0x030300)
+# ifndef DISABLE_OCSP
+# define EXIM_HAVE_OCSP
+# endif
+#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030500
+# define SUPPORT_GNUTLS_KEYLOG
+#endif
#if GNUTLS_VERSION_NUMBER >= 0x030506 && !defined(DISABLE_OCSP)
# define SUPPORT_SRV_OCSP_STACK
#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030603
+# define EXIM_HAVE_TLS1_3
+# define SUPPORT_GNUTLS_EXT_RAW_PARSE
+# define GNUTLS_OCSP_STATUS_REQUEST_GET2
+#endif
#ifdef SUPPORT_DANE
# if GNUTLS_VERSION_NUMBER >= 0x030000
# endif
#endif
+#ifndef DISABLE_TLS_RESUME
+# if GNUTLS_VERSION_NUMBER >= 0x030603
+# define EXIM_HAVE_TLS_RESUME
+# else
+# warning "GnuTLS library version too old; resumption unsupported"
+# endif
+#endif
+
+#if GNUTLS_VERSION_NUMBER >= 0x030200
+# ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
+# define EXIM_HAVE_ALPN
+# endif
+#endif
+
+#if GNUTLS_VERSION_NUMBER >= 0x030702
+# define HAVE_GNUTLS_EXPORTER
+#endif
+
#ifndef DISABLE_OCSP
# include <gnutls/ocsp.h>
#endif
# include <gnutls/dane.h>
#endif
+#include "tls-cipher-stdname.c"
+
+
+#ifdef MACRO_PREDEF
+void
+options_tls(void)
+{
+# ifndef DISABLE_TLS_RESUME
+builtin_macro_create_var(US"_RESUME_DECODE", RESUME_DECODE_STRING );
+# endif
+# ifdef EXIM_HAVE_TLS1_3
+builtin_macro_create(US"_HAVE_TLS1_3");
+# endif
+# ifdef EXIM_HAVE_OCSP
+builtin_macro_create(US"_HAVE_TLS_OCSP");
+# endif
+# ifdef SUPPORT_SRV_OCSP_STACK
+builtin_macro_create(US"_HAVE_TLS_OCSP_LIST");
+# endif
+#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
+builtin_macro_create(US"_HAVE_TLS_CA_CACHE");
+# endif
+# ifdef EXIM_HAVE_ALPN
+builtin_macro_create(US"_HAVE_TLS_ALPN");
+# endif
+}
+#else
+
+
/* GnuTLS 2 vs 3
GnuTLS 3 only:
be set to point to content in one of these instances, as appropriate for
the stage of the process lifetime.
-Not handled here: global tls_channelbinding_b64.
+Not handled here: global tlsp->tls_channelbinding.
*/
typedef struct exim_gnutls_state {
gnutls_session_t session;
- gnutls_certificate_credentials_t x509_cred;
- gnutls_priority_t priority_cache;
+
+ exim_tlslib_state lib_state;
+#define x509_cred libdata0
+#define pri_cache libdata1
+
enum peer_verify_requirement verify_requirement;
int fd_in;
int fd_out;
- BOOL peer_cert_verified;
- BOOL peer_dane_verified;
- BOOL trigger_sni_changes;
- BOOL have_set_peerdn;
- const struct host_item *host;
- gnutls_x509_crt_t peercert;
+
+ BOOL peer_cert_verified:1;
+ BOOL peer_dane_verified:1;
+ BOOL trigger_sni_changes:1;
+ BOOL have_set_peerdn:1;
+ BOOL xfer_eof:1; /*XXX never gets set! */
+ BOOL xfer_error:1;
+#ifdef SUPPORT_CORK
+ BOOL corked:1;
+#endif
+
+ const struct host_item *host; /* NULL if server */
+ gnutls_x509_crt_t peercert;
uschar *peerdn;
uschar *ciphersuite;
uschar *received_sni;
uschar *xfer_buffer;
int xfer_buffer_lwm;
int xfer_buffer_hwm;
- BOOL xfer_eof; /*XXX never gets set! */
- BOOL xfer_error;
} exim_gnutls_state_st;
static const exim_gnutls_state_st exim_gnutls_state_init = {
- .session = NULL,
- .x509_cred = NULL,
- .priority_cache = NULL,
- .verify_requirement = VERIFY_NONE,
+ /* all elements not explicitly intialised here get 0/NULL/FALSE */
.fd_in = -1,
.fd_out = -1,
- .peer_cert_verified = FALSE,
- .peer_dane_verified = FALSE,
- .trigger_sni_changes =FALSE,
- .have_set_peerdn = FALSE,
- .host = NULL,
- .peercert = NULL,
- .peerdn = NULL,
- .ciphersuite = NULL,
- .received_sni = NULL,
-
- .tls_certificate = NULL,
- .tls_privatekey = NULL,
- .tls_sni = NULL,
- .tls_verify_certificates = NULL,
- .tls_crl = NULL,
- .tls_require_ciphers =NULL,
-
- .exp_tls_certificate = NULL,
- .exp_tls_privatekey = NULL,
- .exp_tls_verify_certificates = NULL,
- .exp_tls_crl = NULL,
- .exp_tls_require_ciphers = NULL,
- .exp_tls_verify_cert_hostnames = NULL,
-#ifndef DISABLE_EVENT
- .event_action = NULL,
-#endif
- .tlsp = NULL,
-
- .xfer_buffer = NULL,
- .xfer_buffer_lwm = 0,
- .xfer_buffer_hwm = 0,
- .xfer_eof = FALSE,
- .xfer_error = FALSE,
};
/* Not only do we have our own APIs which don't pass around state, assuming
XXX But see gnutls_session_get_ptr()
*/
-static exim_gnutls_state_st state_server, state_client;
+static exim_gnutls_state_st state_server = {
+ /* all elements not explicitly intialised here get 0/NULL/FALSE */
+ .fd_in = -1,
+ .fd_out = -1,
+};
/* dh_params are initialised once within the lifetime of a process using TLS;
if we used TLS in a long-lived daemon, we'd have to reconsider this. But we
static gnutls_dh_params_t dh_server_params = NULL;
-/* No idea how this value was chosen; preserving it. Default is 3600. */
+static int ssl_session_timeout = 7200; /* Two hours */
-static const int ssl_session_timeout = 200;
-
-static const char * const exim_default_gnutls_priority = "NORMAL";
+static const uschar * const exim_default_gnutls_priority = US"NORMAL";
/* Guard library core initialisation */
#ifndef DISABLE_OCSP
static BOOL gnutls_buggy_ocsp = FALSE;
+static BOOL exim_testharness_disable_ocsp_validity_check = FALSE;
+#endif
+
+#ifdef EXIM_HAVE_ALPN
+static int server_seen_alpn = -1; /* count of names */
+#endif
+#ifdef EXIM_HAVE_TLS_RESUME
+static gnutls_datum_t server_sessticket_key;
#endif
/* Set this to control gnutls_global_set_log_level(); values 0 to 9 will setup
the library logging; a value less than 0 disables the calls to set up logging
-callbacks. Possibly GNuTLS also looks for an environment variable
-"GNUTLS_DEBUG_LEVEL". */
+callbacks. GNuTLS also looks for an environment variable - except not for
+setuid binaries, making it useless - "GNUTLS_DEBUG_LEVEL".
+Allegedly the testscript line "GNUTLS_DEBUG_LEVEL=9 sudo exim ..." would work,
+but the env var must be added to /etc/sudoers too. */
#ifndef EXIM_GNUTLS_LIBRARY_LOG_LEVEL
# define EXIM_GNUTLS_LIBRARY_LOG_LEVEL -1
#endif
# define EXIM_SERVER_DH_BITS_PRE2_12 1024
#endif
-#define exim_gnutls_err_check(rc, Label) do { \
- if ((rc) != GNUTLS_E_SUCCESS) \
- return tls_error((Label), gnutls_strerror(rc), host, errstr); \
- } while (0)
-
-#define expand_check_tlsvar(Varname, errstr) \
+#define Expand_check_tlsvar(Varname, errstr) \
expand_check(state->Varname, US #Varname, &state->exp_##Varname, errstr)
#if GNUTLS_VERSION_NUMBER >= 0x020c00
# endif /* AVOID_GNUTLS_PKCS11 */
#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030404
+# define HAVE_GNUTLS_PRF_RFC5705
+#endif
static int exim_sni_handling_cb(gnutls_session_t session);
-#ifndef DISABLE_OCSP
-static int server_ocsp_stapling_cb(gnutls_session_t session, void * ptr,
- gnutls_datum_t * ocsp_response);
+#ifdef EXIM_HAVE_TLS_RESUME
+static int
+tls_server_ticket_cb(gnutls_session_t sess, u_int htype, unsigned when,
+ unsigned incoming, const gnutls_datum_t * msg);
#endif
-
-/* ------------------------------------------------------------------------ */
-/* Static functions */
-
/*************************************************
* Handle TLS error *
*************************************************/
the connected host if setting up a client
errstr pointer to returned error string
-Returns: OK/DEFER/FAIL
+Returns: DEFER/FAIL
*/
static int
-tls_error(const uschar *prefix, const char *msg, const host_item *host,
+tls_error(const uschar *prefix, const uschar *msg, const host_item *host,
uschar ** errstr)
{
if (errstr)
- *errstr = string_sprintf("(%s)%s%s", prefix, msg ? ": " : "", msg ? msg : "");
+ *errstr = string_sprintf("(%s)%s%s", prefix, msg ? ": " : "", msg ? msg : US"");
return host ? FAIL : DEFER;
}
+/* Returns: DEFER/FAIL */
+static int
+tls_error_gnu(exim_gnutls_state_st * state, const uschar *prefix, int err,
+ uschar ** errstr)
+{
+return tls_error(prefix,
+ state && err == GNUTLS_E_FATAL_ALERT_RECEIVED
+ ? string_sprintf("rxd alert: %s",
+ US gnutls_alert_get_name(gnutls_alert_get(state->session)))
+ : US gnutls_strerror(err),
+ state ? state->host : NULL,
+ errstr);
+}
+
+static int
+tls_error_sys(const uschar *prefix, int err, const host_item *host,
+ uschar ** errstr)
+{
+return tls_error(prefix, US strerror(err), host, errstr);
+}
+
+
+/* ------------------------------------------------------------------------ */
+/* Initialisation */
+
+#ifndef DISABLE_OCSP
+
+static BOOL
+tls_is_buggy_ocsp(void)
+{
+const uschar * s;
+uschar maj, mid, mic;
+
+s = CUS gnutls_check_version(NULL);
+maj = atoi(CCS s);
+if (maj == 3)
+ {
+ while (*s && *s != '.') s++;
+ mid = atoi(CCS ++s);
+ if (mid <= 2)
+ return TRUE;
+ else if (mid >= 5)
+ return FALSE;
+ else
+ {
+ while (*s && *s != '.') s++;
+ mic = atoi(CCS ++s);
+ return mic <= (mid == 3 ? 16 : 3);
+ }
+ }
+return FALSE;
+}
+
+#endif
+
+
+static int
+tls_g_init(uschar ** errstr)
+{
+int rc;
+DEBUG(D_tls) debug_printf("GnuTLS global init required\n");
+
+#if defined(HAVE_GNUTLS_PKCS11) && !defined(GNUTLS_AUTO_PKCS11_MANUAL)
+/* By default, gnutls_global_init will init PKCS11 support in auto mode,
+which loads modules from a config file, which sounds good and may be wanted
+by some sysadmin, but also means in common configurations that GNOME keyring
+environment variables are used and so breaks for users calling mailq.
+To prevent this, we init PKCS11 first, which is the documented approach. */
+
+if (!gnutls_allow_auto_pkcs11)
+ if ((rc = gnutls_pkcs11_init(GNUTLS_PKCS11_FLAG_MANUAL, NULL)))
+ return tls_error_gnu(NULL, US"gnutls_pkcs11_init", rc, errstr);
+#endif
+
+#ifndef GNUTLS_AUTO_GLOBAL_INIT
+if ((rc = gnutls_global_init()))
+ return tls_error_gnu(NULL, US"gnutls_global_init", rc, errstr);
+#endif
+
+#if EXIM_GNUTLS_LIBRARY_LOG_LEVEL >= 0
+DEBUG(D_tls)
+ {
+ gnutls_global_set_log_function(exim_gnutls_logger_cb);
+ /* arbitrarily chosen level; bump up to 9 for more */
+ gnutls_global_set_log_level(EXIM_GNUTLS_LIBRARY_LOG_LEVEL);
+ }
+#endif
+
+#ifndef DISABLE_OCSP
+if (tls_ocsp_file && (gnutls_buggy_ocsp = tls_is_buggy_ocsp()))
+ log_write(0, LOG_MAIN, "OCSP unusable with this GnuTLS library version");
+#endif
+
+exim_gnutls_base_init_done = TRUE;
+return OK;
+}
+
+
+
+/* Daemon-call before each connection. Nothing to do for GnuTLS. */
+
+static void
+tls_per_lib_daemon_tick(void)
+{
+}
+
+/* Daemon one-time initialisation */
+
+static void
+tls_per_lib_daemon_init(void)
+{
+uschar * dummy_errstr;
+static BOOL once = FALSE;
+
+if (!exim_gnutls_base_init_done)
+ tls_g_init(&dummy_errstr);
+
+if (!once)
+ {
+ once = TRUE;
+
+#ifdef EXIM_HAVE_TLS_RESUME
+ /* We are dependent on the GnuTLS implementation of the Session Ticket
+ encryption; both the strength and the key rotation period. We hope that
+ the strength at least matches that of the ciphersuite (but GnuTLS does not
+ document this). */
+
+ gnutls_session_ticket_key_generate(&server_sessticket_key); /* >= 2.10.0 */
+ if (f.running_in_test_harness) ssl_session_timeout = 6;
+#endif
+
+ tls_daemon_creds_reload();
+ }
+}
+/* ------------------------------------------------------------------------ */
/*************************************************
* Deal with logging errors during I/O *
state the current GnuTLS exim state container
rc the GnuTLS error code, or 0 if it's a local error
when text identifying read or write
- text local error text when ec is 0
+ text local error text when rc is 0
Returns: nothing
*/
static void
record_io_error(exim_gnutls_state_st *state, int rc, uschar *when, uschar *text)
{
-const char * msg;
+const uschar * msg;
uschar * errstr;
-if (rc == GNUTLS_E_FATAL_ALERT_RECEIVED)
- msg = CS string_sprintf("%s: %s", US gnutls_strerror(rc),
- US gnutls_alert_get_name(gnutls_alert_get(state->session)));
-else
- msg = gnutls_strerror(rc);
+if (rc == GNUTLS_E_INVALID_SESSION && errno == 0)
+ {
+ DEBUG(D_tls) debug_printf("- INVALID_SESSION with zero errno\n");
+ return;
+ }
+
+msg = rc == GNUTLS_E_FATAL_ALERT_RECEIVED
+ ? string_sprintf("A TLS fatal alert has been received: %s",
+ US gnutls_alert_get_name(gnutls_alert_get(state->session)))
+#ifdef GNUTLS_E_PREMATURE_TERMINATION
+ : rc == GNUTLS_E_PREMATURE_TERMINATION && errno
+ ? string_sprintf("%s: syscall: %s", US gnutls_strerror(rc), strerror(errno))
+#endif
+ : US gnutls_strerror(rc);
(void) tls_error(when, msg, state->host, &errstr);
tls_active fd
tls_bits strength indicator
tls_certificate_verified bool indicator
- tls_channelbinding_b64 for some SASL mechanisms
+ tls_channelbinding for some SASL mechanisms
+ tls_ver a string
tls_cipher a string
tls_peercert pointer to library internal
tls_peerdn a string
static void
extract_exim_vars_from_tls_state(exim_gnutls_state_st * state)
{
-gnutls_cipher_algorithm_t cipher;
-#ifdef HAVE_GNUTLS_SESSION_CHANNEL_BINDING
-int old_pool;
-int rc;
-gnutls_datum_t channel;
-#endif
tls_support * tlsp = state->tlsp;
-tlsp->active = state->fd_out;
-
-cipher = gnutls_cipher_get(state->session);
-/* returns size in "bytes" */
-tlsp->bits = gnutls_cipher_get_key_size(cipher) * 8;
-
-tlsp->cipher = state->ciphersuite;
+tlsp->active.sock = state->fd_out;
+tlsp->active.tls_ctx = state;
DEBUG(D_tls) debug_printf("cipher: %s\n", state->ciphersuite);
tlsp->dane_verified = state->peer_dane_verified;
#endif
-/* note that tls_channelbinding_b64 is not saved to the spool file, since it's
+/* note that tls_channelbinding is not saved to the spool file, since it's
only available for use for authenticators while this TLS session is running. */
-tls_channelbinding_b64 = NULL;
+tlsp->channelbinding = NULL;
#ifdef HAVE_GNUTLS_SESSION_CHANNEL_BINDING
-channel.data = NULL;
-channel.size = 0;
-rc = gnutls_session_channel_binding(state->session, GNUTLS_CB_TLS_UNIQUE, &channel);
-if (rc) {
- DEBUG(D_tls) debug_printf("Channel binding error: %s\n", gnutls_strerror(rc));
-} else {
- old_pool = store_pool;
- store_pool = POOL_PERM;
- tls_channelbinding_b64 = b64encode(channel.data, (int)channel.size);
- store_pool = old_pool;
- DEBUG(D_tls) debug_printf("Have channel bindings cached for possible auth usage.\n");
-}
+ {
+ gnutls_datum_t channel = {.data = NULL, .size = 0};
+ int rc;
+
+# ifdef HAVE_GNUTLS_EXPORTER
+ if (gnutls_protocol_get_version(state->session) >= GNUTLS_TLS1_3)
+ {
+ rc = gnutls_session_channel_binding(state->session, GNUTLS_CB_TLS_EXPORTER, &channel);
+ tlsp->channelbind_exporter = TRUE;
+ }
+ else
+# elif defined(HAVE_GNUTLS_PRF_RFC5705)
+ /* Older libraries may not have GNUTLS_TLS1_3 defined! */
+ if (gnutls_protocol_get_version(state->session) > GNUTLS_TLS1_2)
+ {
+ uschar * buf = store_get(32, state->host ? GET_TAINTED : GET_UNTAINTED);
+ rc = gnutls_prf_rfc5705(state->session,
+ (size_t)24, "EXPORTER-Channel-Binding", (size_t)0, "",
+ 32, CS buf);
+ channel.data = buf;
+ channel.size = 32;
+ }
+ else
+# endif
+ rc = gnutls_session_channel_binding(state->session, GNUTLS_CB_TLS_UNIQUE, &channel);
+
+ if (rc)
+ { DEBUG(D_tls) debug_printf("extracting channel binding: %s\n", gnutls_strerror(rc)); }
+ else
+ {
+ int old_pool = store_pool;
+ /* Declare the taintedness of the binding info. On server, untainted; on
+ client, tainted if we used the Finish msg from the server. */
+
+ store_pool = POOL_PERM;
+ tlsp->channelbinding = b64encode_taint(CUS channel.data, (int)channel.size,
+ !tlsp->channelbind_exporter && state->host ? GET_TAINTED : GET_UNTAINTED);
+ store_pool = old_pool;
+ DEBUG(D_tls) debug_printf("Have channel bindings cached for possible auth usage\n");
+ }
+ }
#endif
/* peercert is set in peer_status() */
tlsp->peerdn = state->peerdn;
-tlsp->sni = state->received_sni;
+
+/* do not corrupt sni sent by client; record sni rxd by server */
+if (!state->host)
+ tlsp->sni = state->received_sni;
/* record our certificate */
{
waste a bit of effort, but it doesn't seem worth messing around with locking to
prevent this.
-Returns: OK/DEFER/FAIL
+Returns: OK/DEFER (expansion issue)/FAIL (requested none)
*/
static int
size_t sz;
uschar *exp_tls_dhparam;
BOOL use_file_in_spool = FALSE;
-BOOL use_fixed_file = FALSE;
host_item *host = NULL; /* dummy for macros */
-DEBUG(D_tls) debug_printf("Initialising GnuTLS server params.\n");
+DEBUG(D_tls) debug_printf("Initialising GnuTLS server params\n");
-rc = gnutls_dh_params_init(&dh_server_params);
-exim_gnutls_err_check(rc, US"gnutls_dh_params_init");
+if ((rc = gnutls_dh_params_init(&dh_server_params)))
+ return tls_error_gnu(NULL, US"gnutls_dh_params_init", rc, errstr);
m.data = NULL;
m.size = 0;
use_file_in_spool = TRUE;
else if (Ustrcmp(exp_tls_dhparam, "none") == 0)
{
- DEBUG(D_tls) debug_printf("Requested no DH parameters.\n");
- return OK;
+ DEBUG(D_tls) debug_printf("Requested no DH parameters\n");
+ return FAIL;
}
else if (exp_tls_dhparam[0] != '/')
{
if (!(m.data = US std_dh_prime_named(exp_tls_dhparam)))
- return tls_error(US"No standard prime named", CS exp_tls_dhparam, NULL, errstr);
+ return tls_error(US"No standard prime named", exp_tls_dhparam, NULL, errstr);
m.size = Ustrlen(m.data);
}
else
- {
- use_fixed_file = TRUE;
filename = exp_tls_dhparam;
- }
if (m.data)
{
- rc = gnutls_dh_params_import_pkcs3(dh_server_params, &m, GNUTLS_X509_FMT_PEM);
- exim_gnutls_err_check(rc, US"gnutls_dh_params_import_pkcs3");
+ if ((rc = gnutls_dh_params_import_pkcs3(dh_server_params, &m, GNUTLS_X509_FMT_PEM)))
+ return tls_error_gnu(NULL, US"gnutls_dh_params_import_pkcs3", rc, errstr);
DEBUG(D_tls) debug_printf("Loaded fixed standard D-H parameters\n");
return OK;
}
#ifdef HAVE_GNUTLS_SEC_PARAM_CONSTANTS
/* If you change this constant, also change dh_param_fn_ext so that we can use a
different filename and ensure we have sufficient bits. */
-dh_bits = gnutls_sec_param_to_pk_bits(GNUTLS_PK_DH, GNUTLS_SEC_PARAM_NORMAL);
-if (!dh_bits)
+
+if (!(dh_bits = gnutls_sec_param_to_pk_bits(GNUTLS_PK_DH, GNUTLS_SEC_PARAM_NORMAL)))
return tls_error(US"gnutls_sec_param_to_pk_bits() failed", NULL, NULL, errstr);
DEBUG(D_tls)
- debug_printf("GnuTLS tells us that for D-H PK, NORMAL is %d bits.\n",
+ debug_printf("GnuTLS tells us that for D-H PK, NORMAL is %d bits\n",
dh_bits);
#else
dh_bits = EXIM_SERVER_DH_BITS_PRE2_12;
DEBUG(D_tls)
- debug_printf("GnuTLS lacks gnutls_sec_param_to_pk_bits(), using %d bits.\n",
+ debug_printf("GnuTLS lacks gnutls_sec_param_to_pk_bits(), using %d bits\n",
dh_bits);
#endif
if (dh_bits > tls_dh_max_bits)
{
DEBUG(D_tls)
- debug_printf("tls_dh_max_bits clamping override, using %d bits instead.\n",
+ debug_printf("tls_dh_max_bits clamping override, using %d bits instead\n",
tls_dh_max_bits);
dh_bits = tls_dh_max_bits;
}
{
saved_errno = errno;
(void)close(fd);
- return tls_error(US"TLS cache stat failed", strerror(saved_errno), NULL, errstr);
+ return tls_error_sys(US"TLS cache stat failed", saved_errno, NULL, errstr);
}
if (!S_ISREG(statbuf.st_mode))
{
{
saved_errno = errno;
(void)close(fd);
- return tls_error(US"fdopen(TLS cache stat fd) failed",
- strerror(saved_errno), NULL, errstr);
+ return tls_error_sys(US"fdopen(TLS cache stat fd) failed",
+ saved_errno, NULL, errstr);
}
m.size = statbuf.st_size;
- if (!(m.data = malloc(m.size)))
+ if (!(m.data = store_malloc(m.size)))
{
fclose(fp);
- return tls_error(US"malloc failed", strerror(errno), NULL, errstr);
+ return tls_error_sys(US"malloc failed", errno, NULL, errstr);
}
if (!(sz = fread(m.data, m.size, 1, fp)))
{
saved_errno = errno;
fclose(fp);
- free(m.data);
- return tls_error(US"fread failed", strerror(saved_errno), NULL, errstr);
+ store_free(m.data);
+ return tls_error_sys(US"fread failed", saved_errno, NULL, errstr);
}
fclose(fp);
rc = gnutls_dh_params_import_pkcs3(dh_server_params, &m, GNUTLS_X509_FMT_PEM);
- free(m.data);
- exim_gnutls_err_check(rc, US"gnutls_dh_params_import_pkcs3");
+ store_free(m.data);
+ if (rc)
+ return tls_error_gnu(NULL, US"gnutls_dh_params_import_pkcs3", rc, errstr);
DEBUG(D_tls) debug_printf("read D-H parameters from file \"%s\"\n", filename);
}
debug_printf("D-H parameter cache file \"%s\" does not exist\n", filename);
}
else
- return tls_error(string_open_failed(errno, "\"%s\" for reading", filename),
+ return tls_error(string_open_failed("\"%s\" for reading", filename),
NULL, NULL, errstr);
/* If ret < 0, either the cache file does not exist, or the data it contains
if ((PATH_MAX - Ustrlen(filename)) < 10)
return tls_error(US"Filename too long to generate replacement",
- CS filename, NULL, errstr);
+ filename, NULL, errstr);
- temp_fn = string_copy(US "%s.XXXXXXX");
+ temp_fn = string_copy(US"exim-dh.XXXXXXX");
if ((fd = mkstemp(CS temp_fn)) < 0) /* modifies temp_fn */
- return tls_error(US"Unable to open temp file", strerror(errno), NULL, errstr);
- (void)fchown(fd, exim_uid, exim_gid); /* Probably not necessary */
+ return tls_error_sys(US"Unable to open temp file", errno, NULL, errstr);
+ (void)exim_chown(temp_fn, exim_uid, exim_gid); /* Probably not necessary */
/* GnuTLS overshoots!
* If we ask for 2236, we might get 2237 or more.
DEBUG(D_tls)
debug_printf("requesting generation of %d bit Diffie-Hellman prime ...\n",
dh_bits_gen);
- rc = gnutls_dh_params_generate2(dh_server_params, dh_bits_gen);
- exim_gnutls_err_check(rc, US"gnutls_dh_params_generate2");
+ if ((rc = gnutls_dh_params_generate2(dh_server_params, dh_bits_gen)))
+ return tls_error_gnu(NULL, US"gnutls_dh_params_generate2", rc, errstr);
/* gnutls_dh_params_export_pkcs3() will tell us the exact size, every time,
and I confirmed that a NULL call to get the size first is how the GnuTLS
sz = 0;
m.data = NULL;
- rc = gnutls_dh_params_export_pkcs3(dh_server_params, GNUTLS_X509_FMT_PEM,
- m.data, &sz);
- if (rc != GNUTLS_E_SHORT_MEMORY_BUFFER)
- exim_gnutls_err_check(rc, US"gnutls_dh_params_export_pkcs3(NULL) sizing");
+ if ( (rc = gnutls_dh_params_export_pkcs3(dh_server_params,
+ GNUTLS_X509_FMT_PEM, m.data, &sz))
+ && rc != GNUTLS_E_SHORT_MEMORY_BUFFER)
+ return tls_error_gnu(NULL, US"gnutls_dh_params_export_pkcs3(NULL) sizing",
+ rc, errstr);
m.size = sz;
- if (!(m.data = malloc(m.size)))
- return tls_error(US"memory allocation failed", strerror(errno), NULL, errstr);
+ if (!(m.data = store_malloc(m.size)))
+ return tls_error_sys(US"memory allocation failed", errno, NULL, errstr);
/* this will return a size 1 less than the allocation size above */
- rc = gnutls_dh_params_export_pkcs3(dh_server_params, GNUTLS_X509_FMT_PEM,
- m.data, &sz);
- if (rc != GNUTLS_E_SUCCESS)
+ if ((rc = gnutls_dh_params_export_pkcs3(dh_server_params, GNUTLS_X509_FMT_PEM,
+ m.data, &sz)))
{
- free(m.data);
- exim_gnutls_err_check(rc, US"gnutls_dh_params_export_pkcs3() real");
+ store_free(m.data);
+ return tls_error_gnu(NULL, US"gnutls_dh_params_export_pkcs3() real", rc, errstr);
}
m.size = sz; /* shrink by 1, probably */
if ((sz = write_to_fd_buf(fd, m.data, (size_t) m.size)) != m.size)
{
- free(m.data);
- return tls_error(US"TLS cache write D-H params failed",
- strerror(errno), NULL, errstr);
+ store_free(m.data);
+ return tls_error_sys(US"TLS cache write D-H params failed",
+ errno, NULL, errstr);
}
- free(m.data);
+ store_free(m.data);
if ((sz = write_to_fd_buf(fd, US"\n", 1)) != 1)
- return tls_error(US"TLS cache write D-H params final newline failed",
- strerror(errno), NULL, errstr);
+ return tls_error_sys(US"TLS cache write D-H params final newline failed",
+ errno, NULL, errstr);
if ((rc = close(fd)))
- return tls_error(US"TLS cache write close() failed", strerror(errno), NULL, errstr);
+ return tls_error_sys(US"TLS cache write close() failed", errno, NULL, errstr);
if (Urename(temp_fn, filename) < 0)
- return tls_error(string_sprintf("failed to rename \"%s\" as \"%s\"",
- temp_fn, filename), strerror(errno), NULL, errstr);
+ return tls_error_sys(string_sprintf("failed to rename \"%s\" as \"%s\"",
+ temp_fn, filename), errno, NULL, errstr);
DEBUG(D_tls) debug_printf("wrote D-H parameters to file \"%s\"\n", filename);
}
-/* Create and install a selfsigned certificate, for use in server mode */
+/* Create and install a selfsigned certificate, for use in server mode. */
static int
tls_install_selfsign(exim_gnutls_state_st * state, uschar ** errstr)
const uschar * where;
int rc;
+#ifndef SUPPORT_SELFSIGN
+where = US"library too old";
+rc = GNUTLS_E_NO_CERTIFICATE_FOUND;
+if (TRUE) goto err;
+#endif
+
+DEBUG(D_tls) debug_printf("TLS: generating selfsigned server cert\n");
where = US"initialising pkey";
if ((rc = gnutls_x509_privkey_init(&pkey))) goto err;
where = US"initialising cert";
if ((rc = gnutls_x509_crt_init(&cert))) goto err;
-where = US"generating pkey";
+where = US"generating pkey"; /* Hangs on 2.12.23 */
if ((rc = gnutls_x509_privkey_generate(pkey, GNUTLS_PK_RSA,
#ifdef SUPPORT_PARAM_TO_PK_BITS
- gnutls_sec_param_to_pk_bits(GNUTLS_PK_RSA, GNUTLS_SEC_PARAM_LOW),
+# ifndef GNUTLS_SEC_PARAM_MEDIUM
+# define GNUTLS_SEC_PARAM_MEDIUM GNUTLS_SEC_PARAM_HIGH
+# endif
+ gnutls_sec_param_to_pk_bits(GNUTLS_PK_RSA, GNUTLS_SEC_PARAM_MEDIUM),
#else
- 1024,
+ 2048,
#endif
0)))
goto err;
where = US"configuring cert";
-now = 0;
+now = 1;
if ( (rc = gnutls_x509_crt_set_version(cert, 3))
|| (rc = gnutls_x509_crt_set_serial(cert, &now, sizeof(now)))
|| (rc = gnutls_x509_crt_set_activation_time(cert, now = time(NULL)))
- || (rc = gnutls_x509_crt_set_expiration_time(cert, now + 60 * 60)) /* 1 hr */
+ || (rc = gnutls_x509_crt_set_expiration_time(cert, now + (long)2 * 60 * 60)) /* 2 hour */
|| (rc = gnutls_x509_crt_set_key(cert, pkey))
|| (rc = gnutls_x509_crt_set_dn_by_oid(cert,
where = US"installing selfsign cert";
/* Since: 2.4.0 */
-if ((rc = gnutls_certificate_set_x509_key(state->x509_cred, &cert, 1, pkey)))
+if ((rc = gnutls_certificate_set_x509_key(state->lib_state.x509_cred,
+ &cert, 1, pkey)))
goto err;
rc = OK;
return rc;
err:
- rc = tls_error(where, gnutls_strerror(rc), NULL, errstr);
+ rc = tls_error_gnu(state, where, rc, errstr);
goto out;
}
static int
tls_add_certfile(exim_gnutls_state_st * state, const host_item * host,
- uschar * certfile, uschar * keyfile, uschar ** errstr)
+ const uschar * certfile, const uschar * keyfile, uschar ** errstr)
{
-int rc = gnutls_certificate_set_x509_key_file(state->x509_cred,
- CS certfile, CS keyfile, GNUTLS_X509_FMT_PEM);
+int rc = gnutls_certificate_set_x509_key_file(state->lib_state.x509_cred,
+ CCS certfile, CCS keyfile, GNUTLS_X509_FMT_PEM);
if (rc < 0)
- return tls_error(
+ return tls_error_gnu(state,
string_sprintf("cert/key setup: cert=%s key=%s", certfile, keyfile),
- gnutls_strerror(rc), host, errstr);
+ rc, errstr);
return -rc;
}
-/*************************************************
-* Variables re-expanded post-SNI *
-*************************************************/
-
-/* Called from both server and client code, via tls_init(), and also from
-the SNI callback after receiving an SNI, if tls_certificate includes "tls_sni".
+#if !defined(DISABLE_OCSP) && !defined(SUPPORT_GNUTLS_EXT_RAW_PARSE)
+/* Load an OCSP proof from file for sending by the server. Called
+on getting a status-request handshake message, for earlier versions
+of GnuTLS. */
-We can tell the two apart by state->received_sni being non-NULL in callback.
+static int
+server_ocsp_stapling_cb(gnutls_session_t session, void * ptr,
+ gnutls_datum_t * ocsp_response)
+{
+int ret;
+DEBUG(D_tls) debug_printf("OCSP stapling callback: %s\n", US ptr);
-The callback should not call us unless state->trigger_sni_changes is true,
-which we are responsible for setting on the first pass through.
+if ((ret = gnutls_load_file(ptr, ocsp_response)) < 0)
+ {
+ DEBUG(D_tls) debug_printf("Failed to load ocsp stapling file %s\n",
+ CS ptr);
+ tls_in.ocsp = OCSP_NOT_RESP;
+ return GNUTLS_E_NO_CERTIFICATE_STATUS;
+ }
-Arguments:
- state exim_gnutls_state_st *
- errstr error string pointer
+tls_in.ocsp = OCSP_VFY_NOT_TRIED;
+return 0;
+}
+#endif
-Returns: OK/DEFER/FAIL
-*/
+#ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
+/* Make a note that we saw a status-request */
static int
-tls_expand_session_files(exim_gnutls_state_st * state, uschar ** errstr)
+tls_server_clienthello_ext(void * ctx, unsigned tls_id,
+ const uschar * data, unsigned size)
{
-struct stat statbuf;
-int rc;
-const host_item *host = state->host; /* macro should be reconsidered? */
-uschar *saved_tls_certificate = NULL;
-uschar *saved_tls_privatekey = NULL;
-uschar *saved_tls_verify_certificates = NULL;
-uschar *saved_tls_crl = NULL;
-int cert_count;
-
-/* We check for tls_sni *before* expansion. */
-if (!host) /* server */
- if (!state->received_sni)
+/* The values for tls_id are documented here:
+https://www.iana.org/assignments/tls-extensiontype-values/tls-extensiontype-values.xhtml */
+switch (tls_id)
+ {
+ case 5: /* Status Request */
+ DEBUG(D_tls) debug_printf("Seen status_request extension from client\n");
+ tls_in.ocsp = OCSP_NOT_RESP;
+ break;
+#ifdef EXIM_HAVE_ALPN
+ case 16: /* Application Layer Protocol Notification */
+ /* The format of "data" here doesn't seem to be documented, but appears
+ to be a 2-byte field with a (redundant, given the "size" arg) total length
+ then a sequence of one-byte size then string (not nul-term) names. The
+ latter is as described in OpenSSL documentation.
+ Note that we do not get called for a match_fail, making it hard to log
+ a single bad ALPN being offered (the common case). */
{
- if ( state->tls_certificate
- && ( Ustrstr(state->tls_certificate, US"tls_sni")
- || Ustrstr(state->tls_certificate, US"tls_in_sni")
- || Ustrstr(state->tls_certificate, US"tls_out_sni")
- ) )
+ gstring * g = NULL;
+
+ DEBUG(D_tls) debug_printf("Seen ALPN extension from client (s=%u):", size);
+ for (const uschar * s = data+2; s-data < size-1; s += *s + 1)
{
- DEBUG(D_tls) debug_printf("We will re-expand TLS session files if we receive SNI.\n");
- state->trigger_sni_changes = TRUE;
+ server_seen_alpn++;
+ g = string_append_listele_n(g, ':', s+1, *s);
+ DEBUG(D_tls) debug_printf(" '%.*s'", (int)*s, s+1);
}
+ DEBUG(D_tls) debug_printf("\n");
+ if (server_seen_alpn > 1)
+ {
+ log_write(0, LOG_MAIN, "TLS ALPN (%Y) rejected", g);
+ DEBUG(D_tls) debug_printf("TLS: too many ALPNs presented in handshake\n");
+ return GNUTLS_E_NO_APPLICATION_PROTOCOL;
+ }
+ break;
}
- else
- {
- /* useful for debugging */
- saved_tls_certificate = state->exp_tls_certificate;
- saved_tls_privatekey = state->exp_tls_privatekey;
- saved_tls_verify_certificates = state->exp_tls_verify_certificates;
- saved_tls_crl = state->exp_tls_crl;
- }
+#endif
+ }
+return 0;
+}
-rc = gnutls_certificate_allocate_credentials(&state->x509_cred);
-exim_gnutls_err_check(rc, US"gnutls_certificate_allocate_credentials");
+/* Callback for client-hello, on server, if we think we might serve stapled-OCSP */
+static int
+tls_server_clienthello_cb(gnutls_session_t session, unsigned int htype,
+ unsigned when, unsigned int incoming, const gnutls_datum_t * msg)
+{
+/* Call fn for each extension seen. 3.6.3 onwards */
+int rc = gnutls_ext_raw_parse(NULL, tls_server_clienthello_ext, msg,
+ GNUTLS_EXT_RAW_FLAG_TLS_CLIENT_HELLO);
+return rc == GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE ? 0 : rc;
+}
-#ifdef SUPPORT_SRV_OCSP_STACK
-gnutls_certificate_set_flags(state->x509_cred, GNUTLS_CERTIFICATE_API_V2);
-#endif
-/* remember: expand_check_tlsvar() is expand_check() but fiddling with
-state members, assuming consistent naming; and expand_check() returns
-false if expansion failed, unless expansion was forced to fail. */
+# ifdef notdef_crashes
+/* Make a note that we saw a status-response */
+static int
+tls_server_servercerts_ext(void * ctx, unsigned tls_id,
+ const unsigned char *data, unsigned size)
+{
+/* debug_printf("%s %u\n", __FUNCTION__, tls_id); */
+/* https://www.iana.org/assignments/tls-extensiontype-values/tls-extensiontype-values.xhtml */
+if (FALSE && tls_id == 5) /* status_request */
+ {
+ DEBUG(D_tls) debug_printf("Seen status_request extension\n");
+ tls_in.ocsp = exim_testharness_disable_ocsp_validity_check
+ ? OCSP_VFY_NOT_TRIED : OCSP_VFIED; /* We know that GnuTLS verifies responses */
+ }
+return 0;
+}
+# endif
-/* check if we at least have a certificate, before doing expensive
-D-H generation. */
+/* Callback for certificates packet, on server, if we think we might serve stapled-OCSP */
+static int
+tls_server_servercerts_cb(gnutls_session_t session, unsigned int htype,
+ unsigned when, unsigned int incoming, const gnutls_datum_t * msg)
+{
+/* Call fn for each extension seen. 3.6.3 onwards */
+# ifdef notdef_crashes
+ /*XXX crashes */
+return gnutls_ext_raw_parse(NULL, tls_server_servercerts_ext, msg, 0);
+# else
+return GNUTLS_E_SUCCESS;
+# endif
+}
+#endif /*SUPPORT_GNUTLS_EXT_RAW_PARSE*/
-if (!expand_check_tlsvar(tls_certificate, errstr))
- return DEFER;
+/*XXX in tls1.3 the cert-status travel as an extension next to the cert, in the
+ "Handshake Protocol: Certificate" record.
+So we need to spot the Certificate handshake message, parse it and spot any status_request extension(s)
-/* certificate is mandatory in server, optional in client */
+This is different to tls1.2 - where it is a separate record (wireshark term) / handshake message (gnutls term).
+*/
-if ( !state->exp_tls_certificate
- || !*state->exp_tls_certificate
- )
- if (!host)
- return tls_install_selfsign(state, errstr);
- else
- DEBUG(D_tls) debug_printf("TLS: no client certificate specified; okay\n");
+#if defined(EXIM_HAVE_TLS_RESUME) || defined(SUPPORT_GNUTLS_EXT_RAW_PARSE)
+/* Callback for certificate-status, on server. We sent stapled OCSP. */
+static int
+tls_server_certstatus_cb(gnutls_session_t session, unsigned int htype,
+ unsigned when, unsigned int incoming, const gnutls_datum_t * msg)
+{
+DEBUG(D_tls) debug_printf("Sending certificate-status\n"); /*XXX we get this for tls1.2 but not for 1.3 */
+# ifdef SUPPORT_SRV_OCSP_STACK
+tls_in.ocsp = exim_testharness_disable_ocsp_validity_check
+ ? OCSP_VFY_NOT_TRIED : OCSP_VFIED; /* We know that GnuTLS verifies responses */
+# else
+tls_in.ocsp = OCSP_VFY_NOT_TRIED;
+# endif
+return 0;
+}
-if (state->tls_privatekey && !expand_check_tlsvar(tls_privatekey, errstr))
- return DEFER;
+/* Callback for handshake messages, on server */
+static int
+tls_server_hook_cb(gnutls_session_t sess, u_int htype, unsigned when,
+ unsigned incoming, const gnutls_datum_t * msg)
+{
+/* debug_printf("%s: htype %u\n", __FUNCTION__, htype); */
+switch (htype)
+ {
+# ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
+ case GNUTLS_HANDSHAKE_CLIENT_HELLO:
+ return tls_server_clienthello_cb(sess, htype, when, incoming, msg);
+ case GNUTLS_HANDSHAKE_CERTIFICATE_PKT:
+ return tls_server_servercerts_cb(sess, htype, when, incoming, msg);
+# endif
+ case GNUTLS_HANDSHAKE_CERTIFICATE_STATUS:
+ return tls_server_certstatus_cb(sess, htype, when, incoming, msg);
+# ifdef EXIM_HAVE_TLS_RESUME
+ case GNUTLS_HANDSHAKE_NEW_SESSION_TICKET:
+ return tls_server_ticket_cb(sess, htype, when, incoming, msg);
+# endif
+ default:
+ return GNUTLS_E_SUCCESS;
+ }
+}
+#endif
+
+
+#if !defined(DISABLE_OCSP) && defined(SUPPORT_GNUTLS_EXT_RAW_PARSE)
+static void
+tls_server_testharness_ocsp_fiddle(void)
+{
+extern char ** environ;
+if (environ) for (uschar ** p = USS environ; *p; p++)
+ if (Ustrncmp(*p, "EXIM_TESTHARNESS_DISABLE_OCSPVALIDITYCHECK", 42) == 0)
+ {
+ DEBUG(D_tls) debug_printf("Permitting known bad OCSP response\n");
+ exim_testharness_disable_ocsp_validity_check = TRUE;
+ }
+}
+#endif
-/* tls_privatekey is optional, defaulting to same file as certificate */
+/**************************************************
+* One-time init credentials for server and client *
+**************************************************/
-if (state->tls_privatekey == NULL || *state->tls_privatekey == '\0')
+static void
+creds_basic_init(gnutls_certificate_credentials_t x509_cred, BOOL server)
+{
+#ifdef SUPPORT_SRV_OCSP_STACK
+gnutls_certificate_set_flags(x509_cred, GNUTLS_CERTIFICATE_API_V2);
+
+# if !defined(DISABLE_OCSP) && defined(SUPPORT_GNUTLS_EXT_RAW_PARSE)
+if (server && tls_ocsp_file)
{
- state->tls_privatekey = state->tls_certificate;
- state->exp_tls_privatekey = state->exp_tls_certificate;
+ if (f.running_in_test_harness)
+ tls_server_testharness_ocsp_fiddle();
+
+ if (exim_testharness_disable_ocsp_validity_check)
+ gnutls_certificate_set_flags(x509_cred,
+ GNUTLS_CERTIFICATE_API_V2 | GNUTLS_CERTIFICATE_SKIP_OCSP_RESPONSE_CHECK);
}
+# endif
+#endif
+DEBUG(D_tls)
+ debug_printf("TLS: basic cred init, %s\n", server ? "server" : "client");
+}
+/* Returns OK/DEFER/FAIL */
+static int
+creds_load_server_certs(exim_gnutls_state_st * state, const uschar * cert,
+ const uschar * pkey, const uschar * ocsp, uschar ** errstr)
+{
+const uschar * clist = cert;
+const uschar * klist = pkey;
+const uschar * olist;
+int csep = 0, ksep = 0, osep = 0, cnt = 0, rc;
+uschar * cfile, * kfile, * ofile;
+#ifndef DISABLE_OCSP
+# ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
+gnutls_x509_crt_fmt_t ocsp_fmt = GNUTLS_X509_FMT_DER;
+# endif
-if (state->exp_tls_certificate && *state->exp_tls_certificate)
- {
- DEBUG(D_tls) debug_printf("certificate file = %s\nkey file = %s\n",
- state->exp_tls_certificate, state->exp_tls_privatekey);
+if (!expand_check(ocsp, US"tls_ocsp_file", &ofile, errstr))
+ return DEFER;
+olist = ofile;
+#endif
- if (state->received_sni)
- if ( Ustrcmp(state->exp_tls_certificate, saved_tls_certificate) == 0
- && Ustrcmp(state->exp_tls_privatekey, saved_tls_privatekey) == 0
- )
- {
- DEBUG(D_tls) debug_printf("TLS SNI: cert and key unchanged\n");
- }
- else
- {
- DEBUG(D_tls) debug_printf("TLS SNI: have a changed cert/key pair.\n");
- }
+while (cfile = string_nextinlist(&clist, &csep, NULL, 0))
- if (!host) /* server */
+ if (!(kfile = string_nextinlist(&klist, &ksep, NULL, 0)))
+ return tls_error(US"cert/key setup: out of keys", NULL, NULL, errstr);
+ else if ((rc = tls_add_certfile(state, NULL, cfile, kfile, errstr)) > OK)
+ return rc;
+ else
{
- const uschar * clist = state->exp_tls_certificate;
- const uschar * klist = state->exp_tls_privatekey;
- const uschar * olist;
- int csep = 0, ksep = 0, osep = 0, cnt = 0;
- uschar * cfile, * kfile, * ofile;
+ int gnutls_cert_index = -rc;
+ DEBUG(D_tls) debug_printf("TLS: cert/key %d %s registered\n",
+ gnutls_cert_index, cfile);
#ifndef DISABLE_OCSP
- if (!expand_check(tls_ocsp_file, US"tls_ocsp_file", &ofile, errstr))
- return DEFER;
- olist = ofile;
-#endif
+ if (ocsp)
+ {
+ /* Set the OCSP stapling server info */
+ if (gnutls_buggy_ocsp)
+ {
+ DEBUG(D_tls)
+ debug_printf("GnuTLS library is buggy for OCSP; avoiding\n");
+ }
+ else if ((ofile = string_nextinlist(&olist, &osep, NULL, 0)))
+ {
+ DEBUG(D_tls) debug_printf("OCSP response file %d = %s\n",
+ gnutls_cert_index, ofile);
+# ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
+ if (Ustrncmp(ofile, US"PEM ", 4) == 0)
+ {
+ ocsp_fmt = GNUTLS_X509_FMT_PEM;
+ ofile += 4;
+ }
+ else if (Ustrncmp(ofile, US"DER ", 4) == 0)
+ {
+ ocsp_fmt = GNUTLS_X509_FMT_DER;
+ ofile += 4;
+ }
- while (cfile = string_nextinlist(&clist, &csep, NULL, 0))
+ if ((rc = gnutls_certificate_set_ocsp_status_request_file2(
+ state->lib_state.x509_cred, CCS ofile, gnutls_cert_index,
+ ocsp_fmt)) < 0)
+ return tls_error_gnu(state,
+ US"gnutls_certificate_set_ocsp_status_request_file2",
+ rc, errstr);
+ DEBUG(D_tls)
+ debug_printf(" %d response%s loaded\n", rc, rc>1 ? "s":"");
- if (!(kfile = string_nextinlist(&klist, &ksep, NULL, 0)))
- return tls_error(US"cert/key setup: out of keys", NULL, host, errstr);
- else if (0 < (rc = tls_add_certfile(state, host, cfile, kfile, errstr)))
- return rc;
- else
- {
- int gnutls_cert_index = -rc;
- DEBUG(D_tls) debug_printf("TLS: cert/key %s registered\n", cfile);
+ /* Arrange callbacks for OCSP request observability */
- /* Set the OCSP stapling server info */
+ if (state->session)
+ gnutls_handshake_set_hook_function(state->session,
+ GNUTLS_HANDSHAKE_ANY, GNUTLS_HOOK_POST, tls_server_hook_cb);
+ else
+ state->lib_state.ocsp_hook = TRUE;
-#ifndef DISABLE_OCSP
- if (tls_ocsp_file)
- if (gnutls_buggy_ocsp)
+
+# else
+# if defined(SUPPORT_SRV_OCSP_STACK)
+ if ((rc = gnutls_certificate_set_ocsp_status_request_function2(
+ state->lib_state.x509_cred, gnutls_cert_index,
+ server_ocsp_stapling_cb, ofile)))
+ return tls_error_gnu(state,
+ US"gnutls_certificate_set_ocsp_status_request_function2",
+ rc, errstr);
+ else
+# endif
+ {
+ if (cnt++ > 0)
{
DEBUG(D_tls)
- debug_printf("GnuTLS library is buggy for OCSP; avoiding\n");
+ debug_printf("oops; multiple OCSP files not supported\n");
+ break;
}
- else if ((ofile = string_nextinlist(&olist, &osep, NULL, 0)))
- {
- /* Use the full callback method for stapling just to get
- observability. More efficient would be to read the file once only,
- if it never changed (due to SNI). Would need restart on file update,
- or watch datestamp. */
+ gnutls_certificate_set_ocsp_status_request_function(
+ state->lib_state.x509_cred, server_ocsp_stapling_cb, ofile);
+ }
+# endif /* SUPPORT_GNUTLS_EXT_RAW_PARSE */
+ }
+ else
+ DEBUG(D_tls) debug_printf("ran out of OCSP response files in list\n");
+ }
+#endif /* DISABLE_OCSP */
+ }
+return OK;
+}
-# ifdef SUPPORT_SRV_OCSP_STACK
- rc = gnutls_certificate_set_ocsp_status_request_function2(
- state->x509_cred, gnutls_cert_index,
- server_ocsp_stapling_cb, ofile);
+static int
+creds_load_client_certs(exim_gnutls_state_st * state, const host_item * host,
+ const uschar * cert, const uschar * pkey, uschar ** errstr)
+{
+int rc = tls_add_certfile(state, host, cert, pkey, errstr);
+if (rc > 0) return rc;
+DEBUG(D_tls) debug_printf("TLS: cert/key registered\n");
+return OK;
+}
- exim_gnutls_err_check(rc,
- US"gnutls_certificate_set_ocsp_status_request_function2");
-# else
- if (cnt++ > 0)
- {
- DEBUG(D_tls)
- debug_printf("oops; multiple OCSP files not supported\n");
- break;
- }
- gnutls_certificate_set_ocsp_status_request_function(
- state->x509_cred, server_ocsp_stapling_cb, ofile);
-# endif
+static int
+creds_load_cabundle(exim_gnutls_state_st * state, const uschar * bundle,
+ const host_item * host, uschar ** errstr)
+{
+int cert_count;
+struct stat statbuf;
- DEBUG(D_tls) debug_printf("OCSP response file = %s\n", ofile);
- }
- else
- DEBUG(D_tls) debug_printf("ran out of OCSP response files in list\n");
+#ifdef SUPPORT_SYSDEFAULT_CABUNDLE
+if (Ustrcmp(bundle, "system") == 0 || Ustrncmp(bundle, "system,", 7) == 0)
+ cert_count = gnutls_certificate_set_x509_system_trust(state->lib_state.x509_cred);
+else
#endif
- }
+ {
+ if (Ustat(bundle, &statbuf) < 0)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "could not stat '%s' "
+ "(tls_verify_certificates): %s", bundle, strerror(errno));
+ return DEFER;
}
- else
+
+#ifndef SUPPORT_CA_DIR
+ /* The test suite passes in /dev/null; we could check for that path explicitly,
+ but who knows if someone has some weird FIFO which always dumps some certs, or
+ other weirdness. The thing we really want to check is that it's not a
+ directory, since while OpenSSL supports that, GnuTLS does not.
+ So s/!S_ISREG/S_ISDIR/ and change some messaging ... */
+ if (S_ISDIR(statbuf.st_mode))
{
- if (0 < (rc = tls_add_certfile(state, host,
- state->exp_tls_certificate, state->exp_tls_privatekey, errstr)))
- return rc;
- DEBUG(D_tls) debug_printf("TLS: cert/key registered\n");
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "tls_verify_certificates \"%s\" is a directory", bundle);
+ return DEFER;
}
+#endif
+
+ DEBUG(D_tls) debug_printf("verify certificates = %s size=" OFF_T_FMT "\n",
+ bundle, statbuf.st_size);
- } /* tls_certificate */
+ if (statbuf.st_size == 0)
+ {
+ DEBUG(D_tls)
+ debug_printf("cert file empty, no certs, no verification, ignoring any CRL\n");
+ return OK;
+ }
+ cert_count =
-/* Set the trusted CAs file if one is provided, and then add the CRL if one is
-provided. Experiment shows that, if the certificate file is empty, an unhelpful
-error message is provided. However, if we just refrain from setting anything up
-in that case, certificate verification fails, which seems to be the correct
-behaviour. */
+#ifdef SUPPORT_CA_DIR
+ (statbuf.st_mode & S_IFMT) == S_IFDIR
+ ?
+ gnutls_certificate_set_x509_trust_dir(state->lib_state.x509_cred,
+ CS bundle, GNUTLS_X509_FMT_PEM)
+ :
+#endif
+ gnutls_certificate_set_x509_trust_file(state->lib_state.x509_cred,
+ CS bundle, GNUTLS_X509_FMT_PEM);
-if (state->tls_verify_certificates && *state->tls_verify_certificates)
+#ifdef SUPPORT_CA_DIR
+ /* Mimic the behaviour with OpenSSL of not advertising a usable-cert list
+ when using the directory-of-certs config model. */
+
+ if ((statbuf.st_mode & S_IFMT) == S_IFDIR)
+ if (state->session)
+ gnutls_certificate_send_x509_rdn_sequence(state->session, 1);
+ else
+ state->lib_state.ca_rdn_emulate = TRUE;
+#endif
+ }
+
+if (cert_count < 0)
+ return tls_error_gnu(state, US"setting certificate trust", cert_count, errstr);
+DEBUG(D_tls)
+ debug_printf("Added %d certificate authorities\n", cert_count);
+
+return OK;
+}
+
+
+static int
+creds_load_crl(exim_gnutls_state_st * state, const uschar * crl, uschar ** errstr)
+{
+int cert_count;
+DEBUG(D_tls) debug_printf("loading CRL file = %s\n", crl);
+if ((cert_count = gnutls_certificate_set_x509_crl_file(state->lib_state.x509_cred,
+ CS crl, GNUTLS_X509_FMT_PEM)) < 0)
+ return tls_error_gnu(state, US"gnutls_certificate_set_x509_crl_file",
+ cert_count, errstr);
+
+DEBUG(D_tls) debug_printf("Processed %d CRLs\n", cert_count);
+return OK;
+}
+
+
+static int
+creds_load_pristring(exim_gnutls_state_st * state, const uschar * p,
+ const char ** errpos)
+{
+if (!p)
{
- if (!expand_check_tlsvar(tls_verify_certificates, errstr))
- return DEFER;
+ p = exim_default_gnutls_priority;
+ DEBUG(D_tls)
+ debug_printf("GnuTLS using default session cipher/priority \"%s\"\n", p);
+ }
+return gnutls_priority_init( (gnutls_priority_t *) &state->lib_state.pri_cache,
+ CCS p, errpos);
+}
+
+static unsigned
+tls_server_creds_init(void)
+{
+uschar * dummy_errstr;
+unsigned lifetime = 0;
+
+state_server.lib_state = null_tls_preload;
+if (gnutls_certificate_allocate_credentials(
+ (gnutls_certificate_credentials_t *) &state_server.lib_state.x509_cred))
+ {
+ state_server.lib_state.x509_cred = NULL;
+ return lifetime;
+ }
+creds_basic_init(state_server.lib_state.x509_cred, TRUE);
+
+#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
+/* If tls_certificate has any $ indicating expansions, it is not good.
+If tls_privatekey is set but has $, not good. Likewise for tls_ocsp_file.
+If all good (and tls_certificate set), load the cert(s). */
+
+if ( opt_set_and_noexpand(tls_certificate)
+# ifndef DISABLE_OCSP
+ && opt_unset_or_noexpand(tls_ocsp_file)
+# endif
+ && opt_unset_or_noexpand(tls_privatekey))
+ {
+ /* Set watches on the filenames. The implementation does de-duplication
+ so we can just blindly do them all.
+ */
+
+ if ( tls_set_watch(tls_certificate, TRUE)
+# ifndef DISABLE_OCSP
+ && tls_set_watch(tls_ocsp_file, TRUE)
+# endif
+ && tls_set_watch(tls_privatekey, TRUE))
+ {
+ DEBUG(D_tls) debug_printf("TLS: preloading server certs\n");
+ if (creds_load_server_certs(&state_server, tls_certificate,
+ tls_privatekey && *tls_privatekey ? tls_privatekey : tls_certificate,
+# ifdef DISABLE_OCSP
+ NULL,
+# else
+ tls_ocsp_file,
+# endif
+ &dummy_errstr) == 0)
+ state_server.lib_state.conn_certs = TRUE;
+ }
+ }
+else if ( !tls_certificate && !tls_privatekey
+# ifndef DISABLE_OCSP
+ && !tls_ocsp_file
+# endif
+ )
+ { /* Generate & preload a selfsigned cert. No files to watch. */
+ if ((tls_install_selfsign(&state_server, &dummy_errstr)) == OK)
+ {
+ state_server.lib_state.conn_certs = TRUE;
+ lifetime = f.running_in_test_harness ? 2 : 60 * 60; /* 1 hour */
+ }
+ }
+else
+ DEBUG(D_tls) debug_printf("TLS: not preloading server certs\n");
+
+/* If tls_verify_certificates is non-empty and has no $, load CAs.
+If none was configured and we can't handle "system", treat as empty. */
+
+if ( opt_set_and_noexpand(tls_verify_certificates)
#ifndef SUPPORT_SYSDEFAULT_CABUNDLE
- if (Ustrcmp(state->exp_tls_verify_certificates, "system") == 0)
- state->exp_tls_verify_certificates = NULL;
+ && Ustrcmp(tls_verify_certificates, "system") != 0
#endif
- if (state->tls_crl && *state->tls_crl)
- if (!expand_check_tlsvar(tls_crl, errstr))
- return DEFER;
+ )
+ {
+ if (tls_set_watch(tls_verify_certificates, FALSE))
+ {
+ DEBUG(D_tls) debug_printf("TLS: preloading CA bundle for server\n");
+ if (creds_load_cabundle(&state_server, tls_verify_certificates,
+ NULL, &dummy_errstr) != OK)
+ return lifetime;
+ state_server.lib_state.cabundle = TRUE;
+
+ /* If CAs loaded and tls_crl is non-empty and has no $, load it */
+
+ if (opt_set_and_noexpand(tls_crl))
+ {
+ if (tls_set_watch(tls_crl, FALSE))
+ {
+ DEBUG(D_tls) debug_printf("TLS: preloading CRL for server\n");
+ if (creds_load_crl(&state_server, tls_crl, &dummy_errstr) != OK)
+ return lifetime;
+ state_server.lib_state.crl = TRUE;
+ }
+ }
+ else
+ DEBUG(D_tls) debug_printf("TLS: not preloading CRL for server\n");
+ }
+ }
+else
+ DEBUG(D_tls) debug_printf("TLS: not preloading CA bundle for server\n");
+#endif /* EXIM_HAVE_INOTIFY */
+
+/* If tls_require_ciphers is non-empty and has no $, load the
+ciphers priority cache. If unset, load with the default.
+(server-only as the client one depends on non/DANE) */
+
+if (!tls_require_ciphers || opt_set_and_noexpand(tls_require_ciphers))
+ {
+ const char * dummy_errpos;
+ DEBUG(D_tls) debug_printf("TLS: preloading cipher list for server: %s\n",
+ tls_require_ciphers);
+ if ( creds_load_pristring(&state_server, tls_require_ciphers, &dummy_errpos)
+ == OK)
+ state_server.lib_state.pri_string = TRUE;
+ }
+else
+ DEBUG(D_tls) debug_printf("TLS: not preloading cipher list for server\n");
+return lifetime;
+}
+
- if (!(state->exp_tls_verify_certificates &&
- *state->exp_tls_verify_certificates))
+/* Preload whatever creds are static, onto a transport. The client can then
+just copy the pointer as it starts up. */
+
+/*XXX this is not called for a cmdline send. But one needing to use >1 conn would benefit,
+and there seems little downside. */
+
+static void
+tls_client_creds_init(transport_instance * t, BOOL watch)
+{
+smtp_transport_options_block * ob = t->drinst.options_block;
+const uschar * trname = t->drinst.name;
+exim_gnutls_state_st tpt_dummy_state;
+host_item * dummy_host = (host_item *)1;
+uschar * dummy_errstr;
+
+if ( !exim_gnutls_base_init_done
+ && tls_g_init(&dummy_errstr) != OK)
+ return;
+
+ob->tls_preload = null_tls_preload;
+if (gnutls_certificate_allocate_credentials(
+ (struct gnutls_certificate_credentials_st **)&ob->tls_preload.x509_cred))
+ {
+ ob->tls_preload.x509_cred = NULL;
+ return;
+ }
+creds_basic_init(ob->tls_preload.x509_cred, FALSE);
+
+tpt_dummy_state.session = NULL;
+tpt_dummy_state.lib_state = ob->tls_preload;
+
+#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
+if ( opt_set_and_noexpand(ob->tls_certificate)
+ && opt_unset_or_noexpand(ob->tls_privatekey))
+ {
+ if ( !watch
+ || ( tls_set_watch(ob->tls_certificate, FALSE)
+ && tls_set_watch(ob->tls_privatekey, FALSE)
+ ) )
{
+ const uschar * pkey = ob->tls_privatekey;
+
DEBUG(D_tls)
- debug_printf("TLS: tls_verify_certificates expanded empty, ignoring\n");
- /* With no tls_verify_certificates, we ignore tls_crl too */
- return OK;
+ debug_printf("TLS: preloading client certs for transport '%s'\n", trname);
+
+ /* The state->lib_state.x509_cred is used for the certs load, and is the sole
+ structure element used. So we can set up a dummy. The hoat arg only
+ selects a retcode in case of fail, so any value */
+
+ if (creds_load_client_certs(&tpt_dummy_state, dummy_host,
+ ob->tls_certificate, pkey ? pkey : ob->tls_certificate,
+ &dummy_errstr) == OK)
+ ob->tls_preload.conn_certs = TRUE;
}
}
else
- {
DEBUG(D_tls)
- debug_printf("TLS: tls_verify_certificates not set or empty, ignoring\n");
- return OK;
- }
+ debug_printf("TLS: not preloading client certs, for transport '%s'\n", trname);
-#ifdef SUPPORT_SYSDEFAULT_CABUNDLE
-if (Ustrcmp(state->exp_tls_verify_certificates, "system") == 0)
- cert_count = gnutls_certificate_set_x509_system_trust(state->x509_cred);
+/* If tls_verify_certificates is non-empty and has no $, load CAs.
+If none was configured and we can't handle "system", treat as empty. */
+
+if ( opt_set_and_noexpand(ob->tls_verify_certificates)
+#ifndef SUPPORT_SYSDEFAULT_CABUNDLE
+ && Ustrcmp(ob->tls_verify_certificates, "system") != 0
+#endif
+ )
+ {
+ if (!watch || tls_set_watch(ob->tls_verify_certificates, FALSE))
+ {
+ DEBUG(D_tls)
+ debug_printf("TLS: preloading CA bundle for transport '%s'\n", trname);
+ if (creds_load_cabundle(&tpt_dummy_state, ob->tls_verify_certificates,
+ dummy_host, &dummy_errstr) != OK)
+ return;
+ ob->tls_preload.cabundle = TRUE;
+
+ if (opt_set_and_noexpand(ob->tls_crl))
+ {
+ if (!watch || tls_set_watch(ob->tls_crl, FALSE))
+ {
+ DEBUG(D_tls) debug_printf("TLS: preloading CRL for transport '%s'\n", trname);
+ if (creds_load_crl(&tpt_dummy_state, ob->tls_crl, &dummy_errstr) != OK)
+ return;
+ ob->tls_preload.crl = TRUE;
+ }
+ }
+ else
+ DEBUG(D_tls) debug_printf("TLS: not preloading CRL, for transport '%s'\n", trname);
+ }
+ }
else
+ DEBUG(D_tls)
+ debug_printf("TLS: not preloading CA bundle, for transport '%s'\n", trname);
+
+/* We do not preload tls_require_ciphers to to the transport as it implicitly
+depends on DANE or plain usage. */
+
#endif
+}
+
+
+#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
+/* Invalidate the creds cached, by dropping the current ones.
+Call when we notice one of the source files has changed. */
+
+static void
+tls_server_creds_invalidate(void)
+{
+if (state_server.lib_state.pri_cache)
+ gnutls_priority_deinit(state_server.lib_state.pri_cache);
+state_server.lib_state.pri_cache = NULL;
+
+if (state_server.lib_state.x509_cred)
+ gnutls_certificate_free_credentials(state_server.lib_state.x509_cred);
+state_server.lib_state = null_tls_preload;
+}
+
+
+static void
+tls_client_creds_invalidate(transport_instance * t)
+{
+smtp_transport_options_block * ob = t->drinst.options_block;
+if (ob->tls_preload.x509_cred)
+ gnutls_certificate_free_credentials(ob->tls_preload.x509_cred);
+ob->tls_preload = null_tls_preload;
+}
+#endif
+
+
+/*************************************************
+* Variables re-expanded post-SNI *
+*************************************************/
+
+/* Called from both server and client code, via tls_init(), and also from
+the SNI callback after receiving an SNI, if tls_certificate includes "tls_sni".
+
+We can tell the two apart by state->received_sni being non-NULL in callback.
+
+The callback should not call us unless state->trigger_sni_changes is true,
+which we are responsible for setting on the first pass through.
+
+Arguments:
+ state exim_gnutls_state_st *
+ errstr error string pointer
+
+Returns: OK/DEFER/FAIL
+*/
+
+static int
+tls_expand_session_files(exim_gnutls_state_st * state, uschar ** errstr)
+{
+int rc;
+const host_item *host = state->host; /* macro should be reconsidered? */
+const uschar *saved_tls_certificate = NULL;
+const uschar *saved_tls_privatekey = NULL;
+const uschar *saved_tls_verify_certificates = NULL;
+const uschar *saved_tls_crl = NULL;
+int cert_count;
+
+/* We check for tls_sni *before* expansion. */
+if (!host) /* server */
+ if (!state->received_sni)
+ {
+ if ( state->tls_certificate
+ && ( Ustrstr(state->tls_certificate, US"tls_sni")
+ || Ustrstr(state->tls_certificate, US"tls_in_sni")
+ || Ustrstr(state->tls_certificate, US"tls_out_sni")
+ ) )
+ {
+ DEBUG(D_tls) debug_printf("We will re-expand TLS session files if we receive SNI\n");
+ state->trigger_sni_changes = TRUE;
+ }
+ }
+ else /* SNI callback case */
+ {
+ /* useful for debugging */
+ saved_tls_certificate = state->exp_tls_certificate;
+ saved_tls_privatekey = state->exp_tls_privatekey;
+ saved_tls_verify_certificates = state->exp_tls_verify_certificates;
+ saved_tls_crl = state->exp_tls_crl;
+ }
+
+if (!state->lib_state.x509_cred)
{
- if (Ustat(state->exp_tls_verify_certificates, &statbuf) < 0)
+ if ((rc = gnutls_certificate_allocate_credentials(
+ (gnutls_certificate_credentials_t *) &state->lib_state.x509_cred)))
+ return tls_error_gnu(state, US"gnutls_certificate_allocate_credentials",
+ rc, errstr);
+ creds_basic_init(state->lib_state.x509_cred, !host);
+ }
+
+
+/* remember: Expand_check_tlsvar() is expand_check() but fiddling with
+state members, assuming consistent naming; and expand_check() returns
+false if expansion failed, unless expansion was forced to fail. */
+
+/* check if we at least have a certificate, before doing expensive
+D-H generation. */
+
+if (!state->lib_state.conn_certs)
+ {
+ if ( !Expand_check_tlsvar(tls_certificate, errstr)
+ || f.expand_string_forcedfail)
{
- log_write(0, LOG_MAIN|LOG_PANIC, "could not stat %s "
- "(tls_verify_certificates): %s", state->exp_tls_verify_certificates,
- strerror(errno));
+ if (f.expand_string_forcedfail)
+ *errstr = US"expansion of tls_certificate failed";
return DEFER;
}
-#ifndef SUPPORT_CA_DIR
- /* The test suite passes in /dev/null; we could check for that path explicitly,
- but who knows if someone has some weird FIFO which always dumps some certs, or
- other weirdness. The thing we really want to check is that it's not a
- directory, since while OpenSSL supports that, GnuTLS does not.
- So s/!S_ISREG/S_ISDIR/ and change some messaging ... */
- if (S_ISDIR(statbuf.st_mode))
+ /* certificate is mandatory in server, optional in client */
+
+ if ( !state->exp_tls_certificate
+ || !*state->exp_tls_certificate
+ )
+ if (!host)
+ return tls_install_selfsign(state, errstr);
+ else
+ DEBUG(D_tls) debug_printf("TLS: no client certificate specified; okay\n");
+
+ if ( state->tls_privatekey && !Expand_check_tlsvar(tls_privatekey, errstr)
+ || f.expand_string_forcedfail
+ )
{
- DEBUG(D_tls)
- debug_printf("verify certificates path is a dir: \"%s\"\n",
- state->exp_tls_verify_certificates);
- log_write(0, LOG_MAIN|LOG_PANIC,
- "tls_verify_certificates \"%s\" is a directory",
- state->exp_tls_verify_certificates);
+ if (f.expand_string_forcedfail)
+ *errstr = US"expansion of tls_privatekey failed";
return DEFER;
}
+
+ /* tls_privatekey is optional, defaulting to same file as certificate */
+
+ if (!state->tls_privatekey || !*state->tls_privatekey)
+ {
+ state->tls_privatekey = state->tls_certificate;
+ state->exp_tls_privatekey = state->exp_tls_certificate;
+ }
+
+ if (state->exp_tls_certificate && *state->exp_tls_certificate)
+ {
+ BOOL load = TRUE;
+ DEBUG(D_tls) debug_printf("certificate file = %s\nkey file = %s\n",
+ state->exp_tls_certificate, state->exp_tls_privatekey);
+
+ if (state->received_sni)
+ if ( Ustrcmp(state->exp_tls_certificate, saved_tls_certificate) == 0
+ && Ustrcmp(state->exp_tls_privatekey, saved_tls_privatekey) == 0
+ )
+ {
+ DEBUG(D_tls) debug_printf("TLS SNI: cert and key unchanged\n");
+ load = FALSE; /* avoid re-loading the same certs */
+ }
+ else /* unload the pre-SNI certs before loading new ones */
+ {
+ DEBUG(D_tls) debug_printf("TLS SNI: have a changed cert/key pair\n");
+ gnutls_certificate_free_keys(state->lib_state.x509_cred);
+ }
+
+ if ( load
+ && (rc = host
+ ? creds_load_client_certs(state, host, state->exp_tls_certificate,
+ state->exp_tls_privatekey, errstr)
+ : creds_load_server_certs(state, state->exp_tls_certificate,
+ state->exp_tls_privatekey,
+#ifdef DISABLE_OCSP
+ NULL,
+#else
+ tls_ocsp_file,
#endif
+ errstr)
+ ) )
+ {
+ DEBUG(D_tls) debug_printf("load-cert: '%s'\n", *errstr);
+ return rc;
+ }
+ }
+ }
+else
+ {
+ DEBUG(D_tls)
+ debug_printf("%s certs were preloaded\n", host ? "client" : "server");
- DEBUG(D_tls) debug_printf("verify certificates = %s size=" OFF_T_FMT "\n",
- state->exp_tls_verify_certificates, statbuf.st_size);
+ if (!state->tls_privatekey) state->tls_privatekey = state->tls_certificate;
+ state->exp_tls_certificate = US state->tls_certificate;
+ state->exp_tls_privatekey = US state->tls_privatekey;
- if (statbuf.st_size == 0)
+#ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
+ if (state->lib_state.ocsp_hook)
+ gnutls_handshake_set_hook_function(state->session,
+ GNUTLS_HANDSHAKE_ANY, GNUTLS_HOOK_POST, tls_server_hook_cb);
+#endif
+ }
+
+
+/* Set the trusted CAs file if one is provided, and then add the CRL if one is
+provided. Experiment shows that, if the certificate file is empty, an unhelpful
+error message is provided. However, if we just refrain from setting anything up
+in that case, certificate verification fails, which seems to be the correct
+behaviour.
+If none was configured and we can't handle "system", treat as empty. */
+
+if (!state->lib_state.cabundle)
+ {
+ if (state->tls_verify_certificates && *state->tls_verify_certificates)
+ {
+ if (!Expand_check_tlsvar(tls_verify_certificates, errstr))
+ return DEFER;
+#ifndef SUPPORT_SYSDEFAULT_CABUNDLE
+ if (Ustrcmp(state->exp_tls_verify_certificates, "system") == 0)
+ state->exp_tls_verify_certificates = NULL;
+#endif
+ if (state->tls_crl && *state->tls_crl)
+ if (!Expand_check_tlsvar(tls_crl, errstr))
+ return DEFER;
+
+ if (!(state->exp_tls_verify_certificates &&
+ *state->exp_tls_verify_certificates))
+ {
+ DEBUG(D_tls)
+ debug_printf("TLS: tls_verify_certificates expanded empty, ignoring\n");
+ /* With no tls_verify_certificates, we ignore tls_crl too */
+ return OK;
+ }
+ }
+ else
{
DEBUG(D_tls)
- debug_printf("cert file empty, no certs, no verification, ignoring any CRL\n");
+ debug_printf("TLS: tls_verify_certificates not set or empty, ignoring\n");
return OK;
}
-
- cert_count =
+ rc = creds_load_cabundle(state, state->exp_tls_verify_certificates, host, errstr);
+ if (rc != OK) return rc;
+ }
+else
+ {
+ DEBUG(D_tls)
+ debug_printf("%s CA bundle was preloaded\n", host ? "client" : "server");
+ state->exp_tls_verify_certificates = US state->tls_verify_certificates;
#ifdef SUPPORT_CA_DIR
- (statbuf.st_mode & S_IFMT) == S_IFDIR
- ?
- gnutls_certificate_set_x509_trust_dir(state->x509_cred,
- CS state->exp_tls_verify_certificates, GNUTLS_X509_FMT_PEM)
- :
+/* Mimic the behaviour with OpenSSL of not advertising a usable-cert list
+when using the directory-of-certs config model. */
+ if (state->lib_state.ca_rdn_emulate)
+ gnutls_certificate_send_x509_rdn_sequence(state->session, 1);
#endif
- gnutls_certificate_set_x509_trust_file(state->x509_cred,
- CS state->exp_tls_verify_certificates, GNUTLS_X509_FMT_PEM);
}
-if (cert_count < 0)
+
+if (!state->lib_state.crl)
{
- rc = cert_count;
- exim_gnutls_err_check(rc, US"setting certificate trust");
+ if ( state->tls_crl && *state->tls_crl
+ && state->exp_tls_crl && *state->exp_tls_crl)
+ return creds_load_crl(state, state->exp_tls_crl, errstr);
}
-DEBUG(D_tls) debug_printf("Added %d certificate authorities.\n", cert_count);
-
-if (state->tls_crl && *state->tls_crl &&
- state->exp_tls_crl && *state->exp_tls_crl)
+else
{
- DEBUG(D_tls) debug_printf("loading CRL file = %s\n", state->exp_tls_crl);
- cert_count = gnutls_certificate_set_x509_crl_file(state->x509_cred,
- CS state->exp_tls_crl, GNUTLS_X509_FMT_PEM);
- if (cert_count < 0)
- {
- rc = cert_count;
- exim_gnutls_err_check(rc, US"gnutls_certificate_set_x509_crl_file");
- }
- DEBUG(D_tls) debug_printf("Processed %d CRLs.\n", cert_count);
+ DEBUG(D_tls)
+ debug_printf("%s CRL was preloaded\n", host ? "client" : "server");
+ state->exp_tls_crl = US state->tls_crl;
}
return OK;
*/
static int
-tls_set_remaining_x509(exim_gnutls_state_st *state, uschar ** errstr)
+tls_set_remaining_x509(exim_gnutls_state_st * state, uschar ** errstr)
{
-int rc;
-const host_item *host = state->host; /* macro should be reconsidered? */
+int rc = OK;
+const host_item * host = state->host; /* macro should be reconsidered? */
/* Create D-H parameters, or read them from the cache file. This function does
its own SMTP error messaging. This only happens for the server, TLS D-H ignores
if (!state->host)
{
if (!dh_server_params)
- {
- rc = init_server_dh(errstr);
- if (rc != OK) return rc;
- }
- gnutls_certificate_set_dh_params(state->x509_cred, dh_server_params);
+ if ((rc = init_server_dh(errstr)) == DEFER) return rc;
+
+ /* Unnecessary & discouraged with 3.6.0 or later, according to docs. But without it,
+ no DHE- ciphers are advertised. */
+
+ if (rc == OK)
+ gnutls_certificate_set_dh_params(state->lib_state.x509_cred, dh_server_params);
}
/* Link the credentials to the session. */
-rc = gnutls_credentials_set(state->session, GNUTLS_CRD_CERTIFICATE, state->x509_cred);
-exim_gnutls_err_check(rc, US"gnutls_credentials_set");
+if ((rc = gnutls_credentials_set(state->session,
+ GNUTLS_CRD_CERTIFICATE, state->lib_state.x509_cred)))
+ return tls_error_gnu(state, US"gnutls_credentials_set", rc, errstr);
return OK;
}
*************************************************/
-#ifndef DISABLE_OCSP
-
-static BOOL
-tls_is_buggy_ocsp(void)
-{
-const uschar * s;
-uschar maj, mid, mic;
-
-s = CUS gnutls_check_version(NULL);
-maj = atoi(CCS s);
-if (maj == 3)
- {
- while (*s && *s != '.') s++;
- mid = atoi(CCS ++s);
- if (mid <= 2)
- return TRUE;
- else if (mid >= 5)
- return FALSE;
- else
- {
- while (*s && *s != '.') s++;
- mic = atoi(CCS ++s);
- return mic <= (mid == 3 ? 16 : 3);
- }
- }
-return FALSE;
-}
-
-#endif
-
-
/* Called from both server and client code. In the case of a server, errors
before actual TLS negotiation return DEFER.
Arguments:
host connected host, if client; NULL if server
- certificate certificate file
- privatekey private key file
- sni TLS SNI to send, sometimes when client; else NULL
- cas CA certs file
- crl CRL file
+ ob tranport options block, if client; NULL if server
require_ciphers tls_require_ciphers setting
caller_state returned state-info structure
errstr error string pointer
static int
tls_init(
const host_item *host,
- const uschar *certificate,
- const uschar *privatekey,
- const uschar *sni,
- const uschar *cas,
- const uschar *crl,
- const uschar *require_ciphers,
+ smtp_transport_options_block * ob,
+ const uschar * require_ciphers,
exim_gnutls_state_st **caller_state,
+ tls_support * tlsp,
uschar ** errstr)
{
-exim_gnutls_state_st *state;
+exim_gnutls_state_st * state;
int rc;
size_t sz;
-const char *errpos;
-uschar *p;
-BOOL want_default_priorities;
-
-if (!exim_gnutls_base_init_done)
- {
- DEBUG(D_tls) debug_printf("GnuTLS global init required.\n");
-
-#ifdef HAVE_GNUTLS_PKCS11
- /* By default, gnutls_global_init will init PKCS11 support in auto mode,
- which loads modules from a config file, which sounds good and may be wanted
- by some sysadmin, but also means in common configurations that GNOME keyring
- environment variables are used and so breaks for users calling mailq.
- To prevent this, we init PKCS11 first, which is the documented approach. */
- if (!gnutls_allow_auto_pkcs11)
- {
- rc = gnutls_pkcs11_init(GNUTLS_PKCS11_FLAG_MANUAL, NULL);
- exim_gnutls_err_check(rc, US"gnutls_pkcs11_init");
- }
-#endif
-
- rc = gnutls_global_init();
- exim_gnutls_err_check(rc, US"gnutls_global_init");
-
-#if EXIM_GNUTLS_LIBRARY_LOG_LEVEL >= 0
- DEBUG(D_tls)
- {
- gnutls_global_set_log_function(exim_gnutls_logger_cb);
- /* arbitrarily chosen level; bump upto 9 for more */
- gnutls_global_set_log_level(EXIM_GNUTLS_LIBRARY_LOG_LEVEL);
- }
-#endif
-
-#ifndef DISABLE_OCSP
- if (tls_ocsp_file && (gnutls_buggy_ocsp = tls_is_buggy_ocsp()))
- log_write(0, LOG_MAIN, "OCSP unusable with this GnuTLS library version");
-#endif
- exim_gnutls_base_init_done = TRUE;
- }
+if ( !exim_gnutls_base_init_done
+ && (rc = tls_g_init(errstr)) != OK)
+ return rc;
if (host)
{
- state = &state_client;
+ /* For client-side sessions we allocate a context. This lets us run
+ several in parallel. */
+
+ int old_pool = store_pool;
+ store_pool = POOL_PERM;
+ state = store_get(sizeof(exim_gnutls_state_st), GET_UNTAINTED);
+ store_pool = old_pool;
+
memcpy(state, &exim_gnutls_state_init, sizeof(exim_gnutls_state_init));
- state->tlsp = &tls_out;
+ state->lib_state = ob->tls_preload;
+ state->tlsp = tlsp;
DEBUG(D_tls) debug_printf("initialising GnuTLS client session\n");
rc = gnutls_init(&state->session, GNUTLS_CLIENT);
+
+ state->tls_certificate = ob->tls_certificate;
+ state->tls_privatekey = ob->tls_privatekey;
+ state->tls_sni = ob->tls_sni;
+ state->tls_verify_certificates = ob->tls_verify_certificates;
+ state->tls_crl = ob->tls_crl;
}
else
{
+ /* Server operations always use the one state_server context. It is not
+ shared because we have forked a fresh process for every receive. However it
+ can get re-used for successive TLS sessions on a single TCP connection. */
+
state = &state_server;
- memcpy(state, &exim_gnutls_state_init, sizeof(exim_gnutls_state_init));
- state->tlsp = &tls_in;
+ state->tlsp = tlsp;
DEBUG(D_tls) debug_printf("initialising GnuTLS server session\n");
rc = gnutls_init(&state->session, GNUTLS_SERVER);
+
+ state->tls_certificate = tls_certificate;
+ state->tls_privatekey = tls_privatekey;
+ state->tls_sni = NULL;
+ state->tls_verify_certificates = tls_verify_certificates;
+ state->tls_crl = tls_crl;
}
-exim_gnutls_err_check(rc, US"gnutls_init");
+if (rc)
+ return tls_error_gnu(state, US"gnutls_init", rc, errstr);
+state->tls_require_ciphers = require_ciphers;
state->host = host;
-state->tls_certificate = certificate;
-state->tls_privatekey = privatekey;
-state->tls_require_ciphers = require_ciphers;
-state->tls_sni = sni;
-state->tls_verify_certificates = cas;
-state->tls_crl = crl;
-
/* This handles the variables that might get re-expanded after TLS SNI;
-that's tls_certificate, tls_privatekey, tls_verify_certificates, tls_crl */
+tls_certificate, tls_privatekey, tls_verify_certificates, tls_crl */
DEBUG(D_tls)
- debug_printf("Expanding various TLS configuration options for session credentials.\n");
+ debug_printf("Expanding various TLS configuration options for session credentials\n");
if ((rc = tls_expand_session_files(state, errstr)) != OK) return rc;
/* These are all other parts of the x509_cred handling, since SNI in GnuTLS
/* set SNI in client, only */
if (host)
{
- if (!expand_check(sni, US"tls_out_sni", &state->tlsp->sni, errstr))
+ if (!expand_check(state->tls_sni, US"tls_out_sni", &state->tlsp->sni, errstr))
return DEFER;
if (state->tlsp->sni && *state->tlsp->sni)
{
DEBUG(D_tls)
debug_printf("Setting TLS client SNI to \"%s\"\n", state->tlsp->sni);
sz = Ustrlen(state->tlsp->sni);
- rc = gnutls_server_name_set(state->session,
- GNUTLS_NAME_DNS, state->tlsp->sni, sz);
- exim_gnutls_err_check(rc, US"gnutls_server_name_set");
+ if ((rc = gnutls_server_name_set(state->session,
+ GNUTLS_NAME_DNS, state->tlsp->sni, sz)))
+ return tls_error_gnu(state, US"gnutls_server_name_set", rc, errstr);
}
}
else if (state->tls_sni)
DEBUG(D_tls) debug_printf("*** PROBABLY A BUG *** " \
"have an SNI set for a server [%s]\n", state->tls_sni);
-/* This is the priority string support,
-http://www.gnutls.org/manual/html_node/Priority-Strings.html
-and replaces gnutls_require_kx, gnutls_require_mac & gnutls_require_protocols.
-This was backwards incompatible, but means Exim no longer needs to track
-all algorithms and provide string forms for them. */
+if (!state->lib_state.pri_string)
+ {
+ const uschar * p = NULL;
+ const char * errpos;
-want_default_priorities = TRUE;
+ /* This is the priority string support,
+ http://www.gnutls.org/manual/html_node/Priority-Strings.html
+ and replaces gnutls_require_kx, gnutls_require_mac & gnutls_require_protocols.
+ This was backwards incompatible, but means Exim no longer needs to track
+ all algorithms and provide string forms for them. */
-if (state->tls_require_ciphers && *state->tls_require_ciphers)
- {
- if (!expand_check_tlsvar(tls_require_ciphers, errstr))
- return DEFER;
- if (state->exp_tls_require_ciphers && *state->exp_tls_require_ciphers)
+ if (state->tls_require_ciphers && *state->tls_require_ciphers)
{
- DEBUG(D_tls) debug_printf("GnuTLS session cipher/priority \"%s\"\n",
- state->exp_tls_require_ciphers);
-
- rc = gnutls_priority_init(&state->priority_cache,
- CS state->exp_tls_require_ciphers, &errpos);
- want_default_priorities = FALSE;
- p = state->exp_tls_require_ciphers;
+ if (!Expand_check_tlsvar(tls_require_ciphers, errstr))
+ return DEFER;
+ if (state->exp_tls_require_ciphers && *state->exp_tls_require_ciphers)
+ {
+ p = state->exp_tls_require_ciphers;
+ DEBUG(D_tls) debug_printf("GnuTLS session cipher/priority \"%s\"\n", p);
+ }
}
+
+ if ((rc = creds_load_pristring(state, p, &errpos)))
+ return tls_error_gnu(state, string_sprintf(
+ "gnutls_priority_init(%s) failed at offset %ld, \"%.6s..\"",
+ p, (long)(errpos - CS p), errpos),
+ rc, errstr);
}
-if (want_default_priorities)
+else
{
- DEBUG(D_tls)
- debug_printf("GnuTLS using default session cipher/priority \"%s\"\n",
- exim_default_gnutls_priority);
- rc = gnutls_priority_init(&state->priority_cache,
- exim_default_gnutls_priority, &errpos);
- p = US exim_default_gnutls_priority;
+ DEBUG(D_tls) debug_printf("cipher list preloaded\n");
+ state->exp_tls_require_ciphers = US state->tls_require_ciphers;
}
-exim_gnutls_err_check(rc, string_sprintf(
- "gnutls_priority_init(%s) failed at offset %ld, \"%.6s..\"",
- p, errpos - CS p, errpos));
-rc = gnutls_priority_set(state->session, state->priority_cache);
-exim_gnutls_err_check(rc, US"gnutls_priority_set");
+if ((rc = gnutls_priority_set(state->session, state->lib_state.pri_cache)))
+ return tls_error_gnu(state, US"gnutls_priority_set", rc, errstr);
+
+/* This also sets the server ticket expiration time to the same, and
+the STEK rotation time to 3x. */
gnutls_db_set_cache_expiration(state->session, ssl_session_timeout);
* Extract peer information *
*************************************************/
+static const uschar *
+cipher_stdname_kcm(gnutls_kx_algorithm_t kx, gnutls_cipher_algorithm_t cipher,
+ gnutls_mac_algorithm_t mac)
+{
+uschar cs_id[2];
+gnutls_kx_algorithm_t kx_i;
+gnutls_cipher_algorithm_t cipher_i;
+gnutls_mac_algorithm_t mac_i;
+
+for (size_t i = 0;
+ gnutls_cipher_suite_info(i, cs_id, &kx_i, &cipher_i, &mac_i, NULL);
+ i++)
+ if (kx_i == kx && cipher_i == cipher && mac_i == mac)
+ return cipher_stdname(cs_id[0], cs_id[1]);
+return NULL;
+}
+
+
+
/* Called from both server and client code.
Only this is allowed to set state->peerdn and state->have_set_peerdn
and we use that to detect double-calls.
*/
static int
-peer_status(exim_gnutls_state_st *state, uschar ** errstr)
+peer_status(exim_gnutls_state_st * state, uschar ** errstr)
{
-uschar cipherbuf[256];
-const gnutls_datum_t *cert_list;
+gnutls_session_t session = state->session;
+const gnutls_datum_t * cert_list;
int old_pool, rc;
unsigned int cert_list_size = 0;
gnutls_protocol_t protocol;
gnutls_mac_algorithm_t mac;
gnutls_certificate_type_t ct;
gnutls_x509_crt_t crt;
-uschar *p, *dn_buf;
+uschar * dn_buf;
size_t sz;
if (state->have_set_peerdn)
state->peerdn = NULL;
/* tls_cipher */
-cipher = gnutls_cipher_get(state->session);
-protocol = gnutls_protocol_get_version(state->session);
-mac = gnutls_mac_get(state->session);
-kx = gnutls_kx_get(state->session);
-
-string_format(cipherbuf, sizeof(cipherbuf),
- "%s:%s:%d",
- gnutls_protocol_get_name(protocol),
- gnutls_cipher_suite_get_name(kx, cipher, mac),
- (int) gnutls_cipher_get_key_size(cipher) * 8);
-
-/* I don't see a way that spaces could occur, in the current GnuTLS
-code base, but it was a concern in the old code and perhaps older GnuTLS
-releases did return "TLS 1.0"; play it safe, just in case. */
-for (p = cipherbuf; *p != '\0'; ++p)
- if (isspace(*p))
- *p = '-';
+cipher = gnutls_cipher_get(session);
+protocol = gnutls_protocol_get_version(session);
+mac = gnutls_mac_get(session);
+kx =
+#ifdef GNUTLS_TLS1_3
+ protocol >= GNUTLS_TLS1_3 ? 0 :
+#endif
+ gnutls_kx_get(session);
+
old_pool = store_pool;
-store_pool = POOL_PERM;
-state->ciphersuite = string_copy(cipherbuf);
+ {
+ tls_support * tlsp = state->tlsp;
+ store_pool = POOL_PERM;
+
+#ifdef SUPPORT_GNUTLS_SESS_DESC
+ {
+ gstring * g = NULL;
+ uschar * s = US gnutls_session_get_desc(session), c;
+
+ /* Nikos M suggests we use this by preference. It returns like:
+ (TLS1.3)-(ECDHE-SECP256R1)-(RSA-PSS-RSAE-SHA256)-(AES-256-GCM)
+
+ For partial back-compat, put a colon after the TLS version, replace the
+ )-( grouping with __, replace in-group - with _ and append the :keysize. */
+
+ /* debug_printf("peer_status: gnutls_session_get_desc %s\n", s); */
+
+ for (s++; (c = *s) && c != ')'; s++) g = string_catn(g, s, 1);
+
+ tlsp->ver = string_copy_from_gstring(g);
+ for (uschar * p = US tlsp->ver; *p; p++)
+ if (*p == '-') { *p = '\0'; break; } /* TLS1.0-PKIX -> TLS1.0 */
+
+ g = string_catn(g, US":", 1);
+ if (*s) s++; /* now on _ between groups */
+ while ((c = *s))
+ {
+ if (*++s)
+ for (++s; (c = *s) && c != ')'; s++)
+ g = string_catn(g, c == '-' ? US"_" : s, 1);
+ /* now on ) closing group */
+ if ((c = *s) && *++s == '-') g = string_catn(g, US"__", 2);
+ /* now on _ between groups */
+ }
+ g = string_catn(g, US":", 1);
+ g = string_cat(g, string_sprintf("%d", (int) gnutls_cipher_get_key_size(cipher) * 8));
+ state->ciphersuite = string_from_gstring(g);
+ }
+#else
+ state->ciphersuite = string_sprintf("%s:%s:%d",
+ gnutls_protocol_get_name(protocol),
+ gnutls_cipher_suite_get_name(kx, cipher, mac),
+ (int) gnutls_cipher_get_key_size(cipher) * 8);
+
+ /* I don't see a way that spaces could occur, in the current GnuTLS
+ code base, but it was a concern in the old code and perhaps older GnuTLS
+ releases did return "TLS 1.0"; play it safe, just in case. */
+
+ for (uschar * p = state->ciphersuite; *p; p++) if (isspace(*p)) *p = '-';
+ tlsp->ver = string_copyn(state->ciphersuite,
+ Ustrchr(state->ciphersuite, ':') - state->ciphersuite);
+#endif
+
+/* debug_printf("peer_status: ciphersuite %s\n", state->ciphersuite); */
+
+ tlsp->cipher = state->ciphersuite;
+ tlsp->bits = gnutls_cipher_get_key_size(cipher) * 8;
+
+ tlsp->cipher_stdname = cipher_stdname_kcm(kx, cipher, mac);
+ }
store_pool = old_pool;
-state->tlsp->cipher = state->ciphersuite;
/* tls_peerdn */
-cert_list = gnutls_certificate_get_peers(state->session, &cert_list_size);
+cert_list = gnutls_certificate_get_peers(session, &cert_list_size);
-if (cert_list == NULL || cert_list_size == 0)
+if (!cert_list || cert_list_size == 0)
{
DEBUG(D_tls) debug_printf("TLS: no certificate from peer (%p & %d)\n",
cert_list, cert_list_size);
if (state->verify_requirement >= VERIFY_REQUIRED)
return tls_error(US"certificate verification failed",
- "no certificate received from peer", state->host, errstr);
+ US"no certificate received from peer", state->host, errstr);
return OK;
}
-ct = gnutls_certificate_type_get(state->session);
-if (ct != GNUTLS_CRT_X509)
+if ((ct = gnutls_certificate_type_get(session)) != GNUTLS_CRT_X509)
{
- const char *ctn = gnutls_certificate_type_get_name(ct);
+ const uschar * ctn = US gnutls_certificate_type_get_name(ct);
DEBUG(D_tls)
debug_printf("TLS: peer cert not X.509 but instead \"%s\"\n", ctn);
if (state->verify_requirement >= VERIFY_REQUIRED)
DEBUG(D_tls) debug_printf("TLS: peer cert problem: %s: %s\n", \
(Label), gnutls_strerror(rc)); \
if (state->verify_requirement >= VERIFY_REQUIRED) \
- return tls_error((Label), gnutls_strerror(rc), state->host, errstr); \
+ return tls_error_gnu(state, (Label), rc, errstr); \
return OK; \
} \
} while (0)
exim_gnutls_peer_err(US"getting size for cert DN failed");
return FAIL; /* should not happen */
}
-dn_buf = store_get_perm(sz);
+dn_buf = store_get_perm(sz, GET_TAINTED);
rc = gnutls_x509_crt_get_dn(crt, CS dn_buf, &sz);
exim_gnutls_peer_err(US"failed to extract certificate DN [gnutls_x509_crt_get_dn(cert 0)]");
int rc;
uint verify;
+DEBUG(D_tls) debug_printf("TLS: checking peer certificate\n");
+*errstr = NULL;
+rc = peer_status(state, errstr);
+
if (state->verify_requirement == VERIFY_NONE)
return TRUE;
-*errstr = NULL;
-
-if ((rc = peer_status(state, errstr)) != OK)
+if (rc != OK || !state->peerdn)
{
verify = GNUTLS_CERT_INVALID;
*errstr = US"certificate not supplied";
# ifdef GNUTLS_BROKEN_DANE_VALIDATION
/* Split the TLSA records into two sets, TA and EE selectors. Run the
dane-verification separately so that we know which selector verified;
- then we know whether to do CA-chain-verification and name-verification
- (needed for TA but not EE). */
+ then we know whether to do name-verification (needed for TA but not EE). */
if (usage == ((1<<DANESSL_USAGE_DANE_TA) | (1<<DANESSL_USAGE_DANE_EE)))
{ /* a mixed-usage bundle */
const char ** dd;
int * ddl;
- for(nrec = 0; state->dane_data_len[nrec]; ) nrec++;
+ for (nrec = 0; state->dane_data_len[nrec]; ) nrec++;
nrec++;
- dd = store_get(nrec * sizeof(uschar *));
- ddl = store_get(nrec * sizeof(int));
+ dd = store_get(nrec * sizeof(uschar *), GET_UNTAINTED);
+ ddl = store_get(nrec * sizeof(int), GET_UNTAINTED);
nrec--;
if ((rc = dane_state_init(&s, 0)))
*errstr = US str.data; /* don't bother to free */
goto badcert;
}
- state->peer_dane_verified = TRUE;
# ifdef GNUTLS_BROKEN_DANE_VALIDATION
/* If a TA-mode TLSA record was used for verification we must additionally
- verify the CA chain and the cert name. For EE-mode, skip it. */
+ verify the cert name (but not the CA chain). For EE-mode, skip it. */
if (usage & (1 << DANESSL_USAGE_DANE_EE))
# endif
{
- state->peer_cert_verified = TRUE;
+ state->peer_dane_verified = state->peer_cert_verified = TRUE;
+ goto goodcert;
+ }
+# ifdef GNUTLS_BROKEN_DANE_VALIDATION
+ /* Assume that the name on the A-record is the one that should be matching
+ the cert. An alternate view is that the domain part of the email address
+ is also permissible. */
+
+ if (gnutls_x509_crt_check_hostname(state->tlsp->peercert,
+ CS state->host->name))
+ {
+ state->peer_dane_verified = state->peer_cert_verified = TRUE;
goto goodcert;
}
+# endif
}
-#endif
+#endif /*SUPPORT_DANE*/
rc = gnutls_certificate_verify_peers2(state->session, &verify);
}
{
state->peer_cert_verified = FALSE;
if (!*errstr)
+ {
+#ifdef GNUTLS_CERT_VFY_STATUS_PRINT
+ DEBUG(D_tls)
+ {
+ gnutls_datum_t txt;
+
+ if (gnutls_certificate_verification_status_print(verify,
+ gnutls_certificate_type_get(state->session), &txt, 0)
+ == GNUTLS_E_SUCCESS)
+ {
+ debug_printf("%s\n", txt.data);
+ gnutls_free(txt.data);
+ }
+ }
+#endif
*errstr = verify & GNUTLS_CERT_REVOKED
? US"certificate revoked" : US"certificate invalid";
+ }
DEBUG(D_tls)
debug_printf("TLS certificate verification failed (%s): peerdn=\"%s\"\n",
else
{
- if (state->exp_tls_verify_cert_hostnames)
+ /* Client side, check the server's certificate name versus the name on the
+ A-record for the connection we made. What to do for server side - what name
+ to use for client? We document that there is no such checking for server
+ side. */
+
+ if ( state->exp_tls_verify_cert_hostnames
+ && !gnutls_x509_crt_check_hostname(state->tlsp->peercert,
+ CS state->exp_tls_verify_cert_hostnames)
+ )
{
- int sep = 0;
- const uschar * list = state->exp_tls_verify_cert_hostnames;
- uschar * name;
- while ((name = string_nextinlist(&list, &sep, NULL, 0)))
- if (gnutls_x509_crt_check_hostname(state->tlsp->peercert, CS name))
- break;
- if (!name)
- {
- DEBUG(D_tls)
- debug_printf("TLS certificate verification failed: cert name mismatch\n");
- if (state->verify_requirement >= VERIFY_REQUIRED)
- goto badcert;
- return TRUE;
- }
+ DEBUG(D_tls)
+ debug_printf("TLS certificate verification failed: cert name mismatch (per GnuTLS)\n");
+ if (state->verify_requirement >= VERIFY_REQUIRED)
+ goto badcert;
+ return TRUE;
}
+
state->peer_cert_verified = TRUE;
DEBUG(D_tls) debug_printf("TLS certificate verified: peerdn=\"%s\"\n",
state->peerdn ? state->peerdn : US"<unset>");
#ifdef SUPPORT_DANE
tlsa_prob:
- *errstr = string_sprintf("TLSA record problem: %s", dane_strerror(rc));
+ *errstr = string_sprintf("TLSA record problem: %s",
+ rc == DANE_E_REQUESTED_DATA_NOT_AVAILABLE ? "none usable" : dane_strerror(rc));
#endif
badcert:
rc = gnutls_server_name_get(session, sni_name, &data_len, &sni_type, 0);
if (rc != GNUTLS_E_SUCCESS)
{
- DEBUG(D_tls) {
+ DEBUG(D_tls)
if (rc == GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE)
- debug_printf("TLS: no SNI presented in handshake.\n");
+ debug_printf("TLS: no SNI presented in handshake\n");
else
debug_printf("TLS failure: gnutls_server_name_get(): %s [%d]\n",
gnutls_strerror(rc), rc);
- }
return 0;
}
/* We now have a UTF-8 string in sni_name */
old_pool = store_pool;
store_pool = POOL_PERM;
-state->received_sni = string_copyn(US sni_name, data_len);
+state->received_sni = string_copy_taint(US sni_name, GET_TAINTED);
store_pool = old_pool;
/* We set this one now so that variable expansions below will work */
{
/* If the setup of certs/etc failed before handshake, TLS would not have
been offered. The best we can do now is abort. */
- return GNUTLS_E_APPLICATION_ERROR_MIN;
+ DEBUG(D_tls) debug_printf("expansion for SNI-dependent session files failed\n");
+ return GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE;
}
rc = tls_set_remaining_x509(state, &dummy_errstr);
-if (rc != OK) return GNUTLS_E_APPLICATION_ERROR_MIN;
-
-return 0;
-}
+if (rc != OK) return GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE;
-
-
-#ifndef DISABLE_OCSP
-
-static int
-server_ocsp_stapling_cb(gnutls_session_t session, void * ptr,
- gnutls_datum_t * ocsp_response)
-{
-int ret;
-DEBUG(D_tls) debug_printf("OCSP stapling callback: %s\n", US ptr);
-
-if ((ret = gnutls_load_file(ptr, ocsp_response)) < 0)
- {
- DEBUG(D_tls) debug_printf("Failed to load ocsp stapling file %s\n",
- CS ptr);
- tls_in.ocsp = OCSP_NOT_RESP;
- return GNUTLS_E_NO_CERTIFICATE_STATUS;
- }
-
-tls_in.ocsp = OCSP_VFY_NOT_TRIED;
return 0;
}
-#endif
#ifndef DISABLE_EVENT
if ((cert_list = gnutls_certificate_get_peers(session, &cert_list_size)))
while (cert_list_size--)
- {
- if ((rc = import_cert(&cert_list[cert_list_size], &crt)) != GNUTLS_E_SUCCESS)
{
- DEBUG(D_tls) debug_printf("TLS: peer cert problem: depth %d: %s\n",
- cert_list_size, gnutls_strerror(rc));
- break;
- }
+ if ((rc = import_cert(&cert_list[cert_list_size], &crt)) != GNUTLS_E_SUCCESS)
+ {
+ DEBUG(D_tls) debug_printf("TLS: peer cert problem: depth %d: %s\n",
+ cert_list_size, gnutls_strerror(rc));
+ break;
+ }
- state->tlsp->peercert = crt;
- if ((yield = event_raise(state->event_action,
- US"tls:cert", string_sprintf("%d", cert_list_size))))
- {
- log_write(0, LOG_MAIN,
- "SSL verify denied by event-action: depth=%d: %s",
- cert_list_size, yield);
- return 1; /* reject */
+ state->tlsp->peercert = crt;
+ if ((yield = event_raise(state->event_action,
+ US"tls:cert", string_sprintf("%d", cert_list_size), &errno)))
+ {
+ log_write(0, LOG_MAIN,
+ "SSL verify denied by event-action: depth=%d: %s",
+ cert_list_size, yield);
+ return 1; /* reject */
+ }
+ state->tlsp->peercert = NULL;
}
- state->tlsp->peercert = NULL;
- }
return 0;
}
#endif
+static gstring *
+ddump(gnutls_datum_t * d)
+{
+gstring * g = string_get((d->size+1) * 2);
+uschar * s = d->data;
+for (unsigned i = d->size; i > 0; i--, s++)
+ {
+ g = string_catn(g, US "0123456789abcdef" + (*s >> 4), 1);
+ g = string_catn(g, US "0123456789abcdef" + (*s & 0xf), 1);
+ }
+return g;
+}
+
+static void
+post_handshake_debug(exim_gnutls_state_st * state)
+{
+#ifdef SUPPORT_GNUTLS_SESS_DESC
+debug_printf("%s\n", gnutls_session_get_desc(state->session));
+#endif
+
+#ifdef SUPPORT_GNUTLS_KEYLOG
+# ifdef EXIM_HAVE_TLS1_3
+if (gnutls_protocol_get_version(state->session) < GNUTLS_TLS1_3)
+# else
+if (TRUE)
+# endif
+ {
+ gnutls_datum_t c, s;
+ gstring * gc, * gs;
+ /* For TLS1.2 we only want the client random and the master secret */
+ gnutls_session_get_random(state->session, &c, &s);
+ gnutls_session_get_master_secret(state->session, &s);
+ gc = ddump(&c);
+ gs = ddump(&s);
+ debug_printf("CLIENT_RANDOM %.*s %.*s\n", (int)gc->ptr, gc->s, (int)gs->ptr, gs->s);
+ }
+else
+ debug_printf("To get keying info for TLS1.3 is hard:\n"
+ " Set environment variable SSLKEYLOGFILE to a filename relative to the spool directory,\n"
+ " and make sure it is writable by the Exim runtime user.\n"
+ " Add SSLKEYLOGFILE to keep_environment in the exim config.\n"
+ " Start Exim as root.\n"
+ " If using sudo, add SSLKEYLOGFILE to env_keep in /etc/sudoers\n"
+ " (works for TLS1.2 also, and saves cut-paste into file).\n"
+ " Trying to use add_environment for this will not work\n");
+#endif
+}
+
+
+#ifdef EXIM_HAVE_TLS_RESUME
+static int
+tls_server_ticket_cb(gnutls_session_t sess, u_int htype, unsigned when,
+ unsigned incoming, const gnutls_datum_t * msg)
+{
+DEBUG(D_tls) debug_printf("newticket cb (on server)\n");
+tls_in.resumption |= RESUME_CLIENT_REQUESTED;
+return 0;
+}
+
+static void
+tls_server_resume_prehandshake(exim_gnutls_state_st * state)
+{
+/* Should the server offer session resumption? */
+tls_in.resumption = RESUME_SUPPORTED;
+if (verify_check_host(&tls_resumption_hosts) == OK)
+ {
+ int rc;
+ /* GnuTLS appears to not do ticket overlap, but does emit a fresh ticket when
+ an offered resumption is unacceptable. We lose one resumption per ticket
+ lifetime, and sessions cannot be indefinitely re-used. There seems to be no
+ way (3.6.7) of changing the default number of 2 TLS1.3 tickets issued, but at
+ least they go out in a single packet. */
+
+ if (!(rc = gnutls_session_ticket_enable_server(state->session,
+ &server_sessticket_key)))
+ tls_in.resumption |= RESUME_SERVER_TICKET;
+ else
+ DEBUG(D_tls)
+ debug_printf("enabling session tickets: %s\n", US gnutls_strerror(rc));
+
+ /* Try to tell if we see a ticket request */
+ gnutls_handshake_set_hook_function(state->session,
+ GNUTLS_HANDSHAKE_ANY, GNUTLS_HOOK_POST, tls_server_hook_cb);
+ }
+}
+
+static void
+tls_server_resume_posthandshake(exim_gnutls_state_st * state)
+{
+if (gnutls_session_resumption_requested(state->session))
+ {
+ /* This tells us the client sent a full (?) ticket. We use a
+ callback on session-ticket request, elsewhere, to tell
+ if a client asked for a ticket.
+ XXX As of GnuTLS 3.0.1 it seems to be returning true even for
+ a pure ticket-req (a zero-length Session Ticket extension
+ in the Client Hello, for 1.2) which mucks up our logic. */
+
+ tls_in.resumption |= RESUME_CLIENT_SUGGESTED;
+ DEBUG(D_tls) debug_printf("client requested resumption\n");
+ }
+if (gnutls_session_is_resumed(state->session))
+ {
+ tls_in.resumption |= RESUME_USED;
+ DEBUG(D_tls) debug_printf("Session resumed\n");
+ }
+}
+#endif /* EXIM_HAVE_TLS_RESUME */
+
+
+#ifdef EXIM_HAVE_ALPN
+/* Expand and convert an Exim list to a gnutls_datum list. False return for fail.
+NULL plist return for silent no-ALPN.
+*/
+
+static BOOL
+tls_alpn_plist(uschar ** tls_alpn, const gnutls_datum_t ** plist, unsigned * plen,
+ uschar ** errstr)
+{
+uschar * exp_alpn;
+
+if (!expand_check(*tls_alpn, US"tls_alpn", &exp_alpn, errstr))
+ return FALSE;
+
+if (!exp_alpn)
+ {
+ DEBUG(D_tls) debug_printf("Setting TLS ALPN forced to fail, not sending\n");
+ *plist = NULL;
+ }
+else
+ {
+ const uschar * list = exp_alpn;
+ int sep = 0;
+ unsigned cnt = 0;
+ gnutls_datum_t * p;
+ uschar * s;
+
+ while (string_nextinlist(&list, &sep, NULL, 0)) cnt++;
+
+ p = store_get(sizeof(gnutls_datum_t) * cnt, exp_alpn);
+ list = exp_alpn;
+ for (int i = 0; s = string_nextinlist(&list, &sep, NULL, 0); i++)
+ { p[i].data = s; p[i].size = Ustrlen(s); }
+ *plist = (*plen = cnt) ? p : NULL;
+ }
+return TRUE;
+}
+
+static void
+tls_server_set_acceptable_alpns(exim_gnutls_state_st * state, uschar ** errstr)
+{
+uschar * local_alpn = string_copy(tls_alpn);
+int rc;
+const gnutls_datum_t * plist;
+unsigned plen;
+
+if (tls_alpn_plist(&local_alpn, &plist, &plen, errstr) && plist)
+ {
+ /* This seems to be only mandatory if the client sends an ALPN extension;
+ not trying ALPN is ok. Need to decide how to support server-side must-alpn. */
+
+ server_seen_alpn = 0;
+ if (!(rc = gnutls_alpn_set_protocols(state->session, plist, plen,
+ GNUTLS_ALPN_MANDATORY)))
+ gnutls_handshake_set_hook_function(state->session,
+ GNUTLS_HANDSHAKE_ANY, GNUTLS_HOOK_POST, tls_server_hook_cb);
+ else
+ DEBUG(D_tls)
+ debug_printf("setting alpn protocols: %s\n", US gnutls_strerror(rc));
+ }
+}
+#endif /* EXIM_HAVE_ALPN */
/* ------------------------------------------------------------------------ */
/* Exported functions */
a TLS session.
Arguments:
- require_ciphers list of allowed ciphers or NULL
errstr pointer to error string
Returns: OK on success
*/
int
-tls_server_start(const uschar * require_ciphers, uschar ** errstr)
+tls_server_start(uschar ** errstr)
{
int rc;
exim_gnutls_state_st * state = NULL;
/* Check for previous activation */
-if (tls_in.active >= 0)
+if (tls_in.active.sock >= 0)
{
- tls_error(US"STARTTLS received after TLS started", "", NULL, errstr);
- smtp_printf("554 Already in TLS\r\n", FALSE);
+ tls_error(US"STARTTLS received after TLS started", US "", NULL, errstr);
+ smtp_printf("554 Already in TLS\r\n", SP_NO_MORE);
return FAIL;
}
DEBUG(D_tls) debug_printf("initialising GnuTLS as a server\n");
-if ((rc = tls_init(NULL, tls_certificate, tls_privatekey,
- NULL, tls_verify_certificates, tls_crl,
- require_ciphers, &state, errstr)) != OK) return rc;
+ {
+#ifdef MEASURE_TIMING
+ struct timeval t0;
+ gettimeofday(&t0, NULL);
+#endif
+
+ if ((rc = tls_init(NULL, NULL,
+ tls_require_ciphers, &state, &tls_in, errstr)) != OK) return rc;
+
+#ifdef MEASURE_TIMING
+ report_time_since(&t0, US"server tls_init (delta)");
+#endif
+ }
+
+#ifdef EXIM_HAVE_ALPN
+tls_server_set_acceptable_alpns(state, errstr);
+#endif
+
+#ifdef EXIM_HAVE_TLS_RESUME
+tls_server_resume_prehandshake(state);
+#endif
/* If this is a host for which certificate verification is mandatory or
optional, set up appropriately. */
if (verify_check_host(&tls_verify_hosts) == OK)
{
DEBUG(D_tls)
- debug_printf("TLS: a client certificate will be required.\n");
+ debug_printf("TLS: a client certificate will be required\n");
state->verify_requirement = VERIFY_REQUIRED;
gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUIRE);
}
else if (verify_check_host(&tls_try_verify_hosts) == OK)
{
DEBUG(D_tls)
- debug_printf("TLS: a client certificate will be requested but not required.\n");
+ debug_printf("TLS: a client certificate will be requested but not required\n");
state->verify_requirement = VERIFY_OPTIONAL;
gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUEST);
}
else
{
DEBUG(D_tls)
- debug_printf("TLS: a client certificate will not be requested.\n");
+ debug_printf("TLS: a client certificate will not be requested\n");
state->verify_requirement = VERIFY_NONE;
gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_IGNORE);
}
{
state->event_action = event_action;
gnutls_session_set_ptr(state->session, state);
- gnutls_certificate_set_verify_function(state->x509_cred, verify_cb);
+ gnutls_certificate_set_verify_function(state->lib_state.x509_cred, verify_cb);
}
#endif
if (!state->tlsp->on_connect)
{
- smtp_printf("220 TLS go ahead\r\n", FALSE);
+ smtp_printf("220 TLS go ahead\r\n", SP_NO_MORE);
fflush(smtp_out);
}
/* Now negotiate the TLS session. We put our own timer on it, since it seems
-that the GnuTLS library doesn't. */
+that the GnuTLS library doesn't.
+From 3.1.0 there is gnutls_handshake_set_timeout() - but it requires you
+to set (and clear down afterwards) up a pull-timeout callback function that does
+a select, so we're no better off unless avoiding signals becomes an issue. */
gnutls_transport_set_ptr2(state->session,
(gnutls_transport_ptr_t)(long) fileno(smtp_in),
state->fd_out = fileno(smtp_out);
sigalrm_seen = FALSE;
-if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
+if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
do
rc = gnutls_handshake(state->session);
while (rc == GNUTLS_E_AGAIN || rc == GNUTLS_E_INTERRUPTED && !sigalrm_seen);
-alarm(0);
+ALARM_CLR(0);
if (rc != GNUTLS_E_SUCCESS)
{
+ DEBUG(D_tls) debug_printf(" error %d from gnutls_handshake: %s\n",
+ rc, gnutls_strerror(rc));
+
/* It seems that, except in the case of a timeout, we have to close the
connection right here; otherwise if the other end is running OpenSSL it hangs
until the server times out. */
if (sigalrm_seen)
{
- tls_error(US"gnutls_handshake", "timed out", NULL, errstr);
+ tls_error(US"gnutls_handshake", US"timed out", NULL, errstr);
+#ifndef DISABLE_EVENT
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+#endif
gnutls_db_remove_session(state->session);
}
else
{
- tls_error(US"gnutls_handshake", gnutls_strerror(rc), NULL, errstr);
+ tls_error_gnu(state, US"gnutls_handshake", rc, errstr);
+#ifndef DISABLE_EVENT
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+#endif
(void) gnutls_alert_send_appropriate(state->session, rc);
gnutls_deinit(state->session);
- gnutls_certificate_free_credentials(state->x509_cred);
millisleep(500);
shutdown(state->fd_out, SHUT_WR);
- for (rc = 1024; fgetc(smtp_in) != EOF && rc > 0; ) rc--; /* drain skt */
+ for (int i = 1024; fgetc(smtp_in) != EOF && i > 0; ) i--; /* drain skt */
(void)fclose(smtp_out);
(void)fclose(smtp_in);
smtp_out = smtp_in = NULL;
return FAIL;
}
-DEBUG(D_tls) debug_printf("gnutls_handshake was successful\n");
+#ifdef GNUTLS_SFLAGS_EXT_MASTER_SECRET
+if (gnutls_session_get_flags(state->session) & GNUTLS_SFLAGS_EXT_MASTER_SECRET)
+ tls_in.ext_master_secret = TRUE;
+#endif
+
+#ifdef EXIM_HAVE_TLS_RESUME
+tls_server_resume_posthandshake(state);
+#endif
+
+DEBUG(D_tls) post_handshake_debug(state);
+
+#ifdef EXIM_HAVE_ALPN
+if (server_seen_alpn > 0)
+ {
+ DEBUG(D_tls)
+ { /* The client offered ALPN. See what was negotiated. */
+ gnutls_datum_t p = {.size = 0};
+ int rc = gnutls_alpn_get_selected_protocol(state->session, &p);
+ if (!rc)
+ debug_printf("ALPN negotiated: %.*s\n", (int)p.size, p.data);
+ else
+ debug_printf("getting alpn protocol: %s\n", US gnutls_strerror(rc));
+
+ }
+ }
+else if (server_seen_alpn == 0)
+ if (verify_check_host(&hosts_require_alpn) == OK)
+ {
+ gnutls_alert_send(state->session, GNUTLS_AL_FATAL, GNUTLS_A_NO_APPLICATION_PROTOCOL);
+ tls_error(US"handshake", US"ALPN required but not negotiated", NULL, errstr);
+ return FAIL;
+ }
+ else
+ DEBUG(D_tls) debug_printf("TLS: no ALPN presented in handshake\n");
+else
+ DEBUG(D_tls) debug_printf("TLS: was not watching for ALPN\n");
+#endif
/* Verify after the fact */
*errstr);
}
-/* Figure out peer DN, and if authenticated, etc. */
-
-if ((rc = peer_status(state, NULL)) != OK) return rc;
-
/* Sets various Exim expansion variables; always safe within server */
extract_exim_vars_from_tls_state(state);
receive_getc = tls_getc;
receive_getbuf = tls_getbuf;
receive_get_cache = tls_get_cache;
+receive_hasc = tls_hasc;
receive_ungetc = tls_ungetc;
receive_feof = tls_feof;
receive_ferror = tls_ferror;
-receive_smtp_buffered = tls_smtp_buffered;
return OK;
}
tls_client_setup_hostname_checks(host_item * host, exim_gnutls_state_st * state,
smtp_transport_options_block * ob)
{
-if (verify_check_given_host(&ob->tls_verify_cert_hostnames, host) == OK)
+if (verify_check_given_host(CUSS &ob->tls_verify_cert_hostnames, host) == OK)
{
state->exp_tls_verify_cert_hostnames =
#ifdef SUPPORT_I18N
- string_domain_utf8_to_alabel(host->name, NULL);
+ string_domain_utf8_to_alabel(host->certname, NULL);
#else
- host->name;
+ host->certname;
#endif
DEBUG(D_tls)
- debug_printf("TLS: server cert verification includes hostname: \"%s\".\n",
+ debug_printf("TLS: server cert verification includes hostname: \"%s\"\n",
state->exp_tls_verify_cert_hostnames);
}
}
static BOOL
dane_tlsa_load(exim_gnutls_state_st * state, dns_answer * dnsa)
{
-dns_record * rr;
dns_scan dnss;
int i;
const char ** dane_data;
int * dane_data_len;
-for (rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS), i = 1;
- rr;
+i = 1;
+for (dns_record * rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS); rr;
rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)
) if (rr->type == T_TLSA) i++;
-dane_data = store_get(i * sizeof(uschar *));
-dane_data_len = store_get(i * sizeof(int));
+dane_data = store_get(i * sizeof(uschar *), GET_UNTAINTED);
+dane_data_len = store_get(i * sizeof(int), GET_UNTAINTED);
-for (rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS), i = 0;
- rr;
+i = 0;
+for (dns_record * rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS); rr;
rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)
- ) if (rr->type == T_TLSA)
+ ) if (rr->type == T_TLSA && rr->size > 3)
{
const uschar * p = rr->data;
+/*XXX need somehow to mark rr and its data as tainted. Doues this mean copying it? */
uint8_t usage = p[0], sel = p[1], type = p[2];
DEBUG(D_tls)
}
tls_out.tlsa_usage |= 1<<usage;
- dane_data[i] = p;
+ dane_data[i] = CS p;
dane_data_len[i++] = rr->size;
}
+#ifdef EXIM_HAVE_TLS_RESUME
+/* On the client, get any stashed session for the given IP from hints db
+and apply it to the ssl-connection for attempted resumption. Although
+there is a gnutls_session_ticket_enable_client() interface it is
+documented as unnecessary (as of 3.6.7) as "session tickets are emabled
+by deafult". There seems to be no way to disable them, so even hosts not
+enabled by the transport option will be sent a ticket request. We will
+however avoid storing and retrieving session information. */
+
+static void
+tls_retrieve_session(tls_support * tlsp, gnutls_session_t session,
+ smtp_connect_args * conn_args, smtp_transport_options_block * ob)
+{
+tlsp->resumption = RESUME_SUPPORTED;
+
+if (!conn_args->have_lbserver)
+ { DEBUG(D_tls) debug_printf(
+ "resumption not supported: no LB detection done (continued-conn?)\n"); }
+else if (verify_check_given_host(CUSS &ob->tls_resumption_hosts, conn_args->host) == OK)
+ {
+ dbdata_tls_session * dt;
+ int len, rc;
+ open_db dbblock, * dbm_file;
+
+ tlsp->host_resumable = TRUE;
+ tls_client_resmption_key(tlsp, conn_args, ob);
+
+ tlsp->resumption |= RESUME_CLIENT_REQUESTED;
+ if ((dbm_file = dbfn_open(US"tls", O_RDONLY, &dbblock, FALSE, FALSE)))
+ {
+ /* We'd like to filter the retrieved session for ticket advisory expiry,
+ but 3.6.1 seems to give no access to that */
+
+ if ((dt = dbfn_read_with_length(dbm_file, tlsp->resume_index, &len)))
+ if (!(rc = gnutls_session_set_data(session,
+ CUS dt->session, (size_t)len - sizeof(dbdata_tls_session))))
+ {
+ DEBUG(D_tls) debug_printf("good session\n");
+ tlsp->resumption |= RESUME_CLIENT_SUGGESTED;
+ }
+ else DEBUG(D_tls) debug_printf("setting session resumption data: %s\n",
+ US gnutls_strerror(rc));
+ dbfn_close(dbm_file);
+ }
+ }
+else DEBUG(D_tls) debug_printf("no resumption for this host\n");
+}
+
+
+static void
+tls_save_session(tls_support * tlsp, gnutls_session_t session, const host_item * host)
+{
+/* TLS 1.2 - we get both the callback and the direct posthandshake call,
+but this flag is not set until the second. TLS 1.3 it's the other way about.
+Keep both calls as the session data cannot be extracted before handshake
+completes. */
+
+if (gnutls_session_get_flags(session) & GNUTLS_SFLAGS_SESSION_TICKET)
+ {
+ gnutls_datum_t tkt;
+ int rc;
+
+ DEBUG(D_tls) debug_printf("server offered session ticket\n");
+ tlsp->ticket_received = TRUE;
+ tlsp->resumption |= RESUME_SERVER_TICKET;
+
+ if (tlsp->host_resumable)
+ if (!(rc = gnutls_session_get_data2(session, &tkt)))
+ {
+ open_db dbblock, * dbm_file;
+ int dlen = sizeof(dbdata_tls_session) + tkt.size;
+ dbdata_tls_session * dt = store_get(dlen, GET_TAINTED);
+
+ DEBUG(D_tls) debug_printf(" session data size %u\n", (unsigned)tkt.size);
+ memcpy(dt->session, tkt.data, tkt.size);
+ gnutls_free(tkt.data);
+
+ if ((dbm_file = dbfn_open(US"tls", O_RDWR|O_CREAT, &dbblock, FALSE, FALSE)))
+ {
+ /* key for the db is the IP */
+ dbfn_write(dbm_file, tlsp->resume_index, dt, dlen);
+ dbfn_close(dbm_file);
+
+ DEBUG(D_tls)
+ debug_printf(" wrote session db (len %u)\n", (unsigned)dlen);
+ }
+ }
+ else
+ { DEBUG(D_tls)
+ debug_printf(" extract session data: %s\n", US gnutls_strerror(rc));
+ }
+ else DEBUG(D_tls)
+ debug_printf(" host not resmable; not saving ticket\n");
+ }
+}
+
+
+/* With a TLS1.3 session, the ticket(s) are not seen until
+the first data read is attempted. And there's often two of them.
+Pick them up with this callback. We are also called for 1.2
+but we do nothing.
+*/
+static int
+tls_client_ticket_cb(gnutls_session_t sess, u_int htype, unsigned when,
+ unsigned incoming, const gnutls_datum_t * msg)
+{
+exim_gnutls_state_st * state = gnutls_session_get_ptr(sess);
+tls_support * tlsp = state->tlsp;
+
+DEBUG(D_tls) debug_printf("newticket cb (on client)\n");
+
+if (!tlsp->ticket_received)
+ tls_save_session(tlsp, sess, state->host);
+return 0;
+}
+
+
+static void
+tls_client_resume_prehandshake(exim_gnutls_state_st * state,
+ tls_support * tlsp, smtp_connect_args * conn_args,
+ smtp_transport_options_block * ob)
+{
+gnutls_session_set_ptr(state->session, state);
+gnutls_handshake_set_hook_function(state->session,
+ GNUTLS_HANDSHAKE_NEW_SESSION_TICKET, GNUTLS_HOOK_POST, tls_client_ticket_cb);
+
+tls_retrieve_session(tlsp, state->session, conn_args, ob);
+}
+
+static void
+tls_client_resume_posthandshake(exim_gnutls_state_st * state,
+ tls_support * tlsp, host_item * host)
+{
+if (gnutls_session_is_resumed(state->session))
+ {
+ DEBUG(D_tls) debug_printf("Session resumed\n");
+ tlsp->resumption |= RESUME_USED;
+ }
+
+tls_save_session(tlsp, state->session, host);
+}
+#endif /* !DISABLE_TLS_RESUME */
+
+
/*************************************************
* Start a TLS session in a client *
*************************************************/
/* Called from the smtp transport after STARTTLS has been accepted.
Arguments:
- fd the fd of the connection
- host connected host (for messages)
- addr the first address (not used)
- tb transport (always smtp)
- tlsa_dnsa non-NULL, either request or require dane for this host, and
- a TLSA record found. Therefore, dane verify required.
- Which implies cert must be requested and supplied, dane
- verify must pass, and cert verify irrelevant (incl.
- hostnames), and (caller handled) require_tls
- errstr error string pointer
-
-Returns: OK/DEFER/FAIL (because using common functions),
- but for a client, DEFER and FAIL have the same meaning
+ cctx connection context
+ conn_args connection details
+ cookie datum for randomness (not used)
+ tlsp record details of channel configuration here; must be non-NULL
+ errstr error string pointer
+
+Returns: TRUE for success with TLS session context set in smtp context,
+ FALSE on error
*/
-int
-tls_client_start(int fd, host_item *host,
- address_item *addr ARG_UNUSED,
- transport_instance * tb,
-#ifdef SUPPORT_DANE
- dns_answer * tlsa_dnsa,
-#endif
- uschar ** errstr)
+BOOL
+tls_client_start(client_conn_ctx * cctx, smtp_connect_args * conn_args,
+ void * cookie ARG_UNUSED,
+ tls_support * tlsp, uschar ** errstr)
{
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)tb->options_block;
+host_item * host = conn_args->host; /* for msgs and option-tests */
+transport_instance * tb = conn_args->tblock; /* always smtp or NULL */
+smtp_transport_options_block * ob = tb
+ ? tb->drinst.options_block
+ : &smtp_transport_option_defaults;
int rc;
exim_gnutls_state_st * state = NULL;
-uschar *cipher_list = NULL;
+uschar * cipher_list = NULL;
+
#ifndef DISABLE_OCSP
BOOL require_ocsp =
- verify_check_given_host(&ob->hosts_require_ocsp, host) == OK;
+ verify_check_given_host(CUSS &ob->hosts_require_ocsp, host) == OK;
BOOL request_ocsp = require_ocsp ? TRUE
- : verify_check_given_host(&ob->hosts_request_ocsp, host) == OK;
+ : verify_check_given_host(CUSS &ob->hosts_request_ocsp, host) == OK;
#endif
-DEBUG(D_tls) debug_printf("initialising GnuTLS as a client on fd %d\n", fd);
+DEBUG(D_tls) debug_printf("initialising GnuTLS as a client on fd %d\n", cctx->sock);
#ifdef SUPPORT_DANE
-if (tlsa_dnsa && ob->dane_require_tls_ciphers)
+/* If dane is flagged, have either request or require dane for this host, and
+a TLSA record found. Therefore, dane verify required. Which implies cert must
+be requested and supplied, dane verify must pass, and cert verify irrelevant
+(incl. hostnames), and (caller handled) require_tls and sni=$domain */
+
+if (conn_args->dane && ob->dane_require_tls_ciphers)
{
- /* not using expand_check_tlsvar because not yet in state */
+ /* not using Expand_check_tlsvar because not yet in state */
if (!expand_check(ob->dane_require_tls_ciphers, US"dane_require_tls_ciphers",
&cipher_list, errstr))
- return DEFER;
+ return FALSE;
cipher_list = cipher_list && *cipher_list
? ob->dane_require_tls_ciphers : ob->tls_require_ciphers;
}
if (!cipher_list)
cipher_list = ob->tls_require_ciphers;
-if ((rc = tls_init(host, ob->tls_certificate, ob->tls_privatekey,
- ob->tls_sni, ob->tls_verify_certificates, ob->tls_crl,
- cipher_list, &state, errstr)) != OK)
- return rc;
+ {
+#ifdef MEASURE_TIMING
+ struct timeval t0;
+ gettimeofday(&t0, NULL);
+#endif
+
+ if (tls_init(host, ob, cipher_list, &state, tlsp, errstr) != OK)
+ return FALSE;
+
+#ifdef MEASURE_TIMING
+ report_time_since(&t0, US"client tls_init (delta)");
+#endif
+ }
+
+if (ob->tls_alpn)
+#ifdef EXIM_HAVE_ALPN
+ {
+ const gnutls_datum_t * plist;
+ unsigned plen;
+
+ if (!tls_alpn_plist(&ob->tls_alpn, &plist, &plen, errstr))
+ return FALSE;
+ if (plist)
+ if (gnutls_alpn_set_protocols(state->session, plist, plen, 0) != 0)
+ {
+ tls_error(US"alpn init", NULL, state->host, errstr);
+ return FALSE;
+ }
+ else
+ DEBUG(D_tls) debug_printf("Setting TLS ALPN '%s'\n", ob->tls_alpn);
+ }
+#else
+ log_write(0, LOG_MAIN, "ALPN unusable with this GnuTLS library version; ignoring \"%s\"\n",
+ ob->tls_alpn);
+#endif
{
int dh_min_bits = ob->tls_dh_min_bits;
the specified host patterns if one of them is defined */
#ifdef SUPPORT_DANE
-if (tlsa_dnsa && dane_tlsa_load(state, tlsa_dnsa))
+if (conn_args->dane && dane_tlsa_load(state, &conn_args->tlsa_dnsa))
{
DEBUG(D_tls)
- debug_printf("TLS: server certificate DANE required.\n");
+ debug_printf("TLS: server certificate DANE required\n");
state->verify_requirement = VERIFY_DANE;
gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUIRE);
}
&& !ob->tls_verify_hosts
&& (!ob->tls_try_verify_hosts || !*ob->tls_try_verify_hosts)
)
- || verify_check_given_host(&ob->tls_verify_hosts, host) == OK
+ || verify_check_given_host(CUSS &ob->tls_verify_hosts, host) == OK
)
{
tls_client_setup_hostname_checks(host, state, ob);
DEBUG(D_tls)
- debug_printf("TLS: server certificate verification required.\n");
+ debug_printf("TLS: server certificate verification required\n");
state->verify_requirement = VERIFY_REQUIRED;
gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUIRE);
}
-else if (verify_check_given_host(&ob->tls_try_verify_hosts, host) == OK)
+else if (verify_check_given_host(CUSS &ob->tls_try_verify_hosts, host) == OK)
{
tls_client_setup_hostname_checks(host, state, ob);
DEBUG(D_tls)
- debug_printf("TLS: server certificate verification optional.\n");
+ debug_printf("TLS: server certificate verification optional\n");
state->verify_requirement = VERIFY_OPTIONAL;
gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUEST);
}
else
{
DEBUG(D_tls)
- debug_printf("TLS: server certificate verification not required.\n");
+ debug_printf("TLS: server certificate verification not required\n");
state->verify_requirement = VERIFY_NONE;
gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_IGNORE);
}
DEBUG(D_tls) debug_printf("TLS: will request OCSP stapling\n");
if ((rc = gnutls_ocsp_status_request_enable_client(state->session,
NULL, 0, NULL)) != OK)
- return tls_error(US"cert-status-req",
- gnutls_strerror(rc), state->host, errstr);
- tls_out.ocsp = OCSP_NOT_RESP;
+ {
+ tls_error_gnu(state, US"cert-status-req", rc, errstr);
+ return FALSE;
+ }
+ tlsp->ocsp = OCSP_NOT_RESP;
}
#endif
+#ifdef EXIM_HAVE_TLS_RESUME
+tls_client_resume_prehandshake(state, tlsp, conn_args, ob);
+#endif
+
#ifndef DISABLE_EVENT
-if (tb->event_action)
+if (tb && tb->event_action)
{
state->event_action = tb->event_action;
gnutls_session_set_ptr(state->session, state);
- gnutls_certificate_set_verify_function(state->x509_cred, verify_cb);
+ gnutls_certificate_set_verify_function(state->lib_state.x509_cred, verify_cb);
}
#endif
-gnutls_transport_set_ptr(state->session, (gnutls_transport_ptr_t)(long) fd);
-state->fd_in = fd;
-state->fd_out = fd;
+gnutls_transport_set_ptr(state->session, (gnutls_transport_ptr_t)(long) cctx->sock);
+state->fd_in = cctx->sock;
+state->fd_out = cctx->sock;
DEBUG(D_tls) debug_printf("about to gnutls_handshake\n");
/* There doesn't seem to be a built-in timeout on connection. */
sigalrm_seen = FALSE;
-alarm(ob->command_timeout);
+ALARM(ob->command_timeout);
do
rc = gnutls_handshake(state->session);
while (rc == GNUTLS_E_AGAIN || rc == GNUTLS_E_INTERRUPTED && !sigalrm_seen);
-alarm(0);
+ALARM_CLR(0);
if (rc != GNUTLS_E_SUCCESS)
+ {
if (sigalrm_seen)
{
gnutls_alert_send(state->session, GNUTLS_AL_FATAL, GNUTLS_A_USER_CANCELED);
- return tls_error(US"gnutls_handshake", "timed out", state->host, errstr);
+ tls_error(US"gnutls_handshake", US"timed out", state->host, errstr);
}
else
- return tls_error(US"gnutls_handshake", gnutls_strerror(rc), state->host, errstr);
+ tls_error_gnu(state, US"gnutls_handshake", rc, errstr);
+ return FALSE;
+ }
-DEBUG(D_tls) debug_printf("gnutls_handshake was successful\n");
+DEBUG(D_tls) post_handshake_debug(state);
/* Verify late */
if (!verify_certificate(state, errstr))
- return tls_error(US"certificate verification failed", *errstr, state->host, errstr);
+ {
+ tls_error(US"certificate verification failed", *errstr, state->host, errstr);
+ return FALSE;
+ }
+
+#ifdef GNUTLS_SFLAGS_EXT_MASTER_SECRET
+if (gnutls_session_get_flags(state->session) & GNUTLS_SFLAGS_EXT_MASTER_SECRET)
+ tlsp->ext_master_secret = TRUE;
+#endif
#ifndef DISABLE_OCSP
-if (require_ocsp)
+if (request_ocsp)
{
DEBUG(D_tls)
{
gnutls_datum_t stapling;
gnutls_ocsp_resp_t resp;
gnutls_datum_t printed;
- if ( (rc= gnutls_ocsp_status_request_get(state->session, &stapling)) == 0
- && (rc= gnutls_ocsp_resp_init(&resp)) == 0
- && (rc= gnutls_ocsp_resp_import(resp, &stapling)) == 0
- && (rc= gnutls_ocsp_resp_print(resp, GNUTLS_OCSP_PRINT_FULL, &printed)) == 0
- )
- {
- debug_printf("%.4096s", printed.data);
- gnutls_free(printed.data);
- }
- else
- (void) tls_error(US"ocsp decode", gnutls_strerror(rc), state->host, errstr);
+ unsigned idx = 0;
+
+ for (;
+# ifdef GNUTLS_OCSP_STATUS_REQUEST_GET2
+ (rc = gnutls_ocsp_status_request_get2(state->session, idx, &stapling)) == 0;
+#else
+ (rc = gnutls_ocsp_status_request_get(state->session, &stapling)) == 0;
+#endif
+ idx++)
+ if ( (rc= gnutls_ocsp_resp_init(&resp)) == 0
+ && (rc= gnutls_ocsp_resp_import(resp, &stapling)) == 0
+ && (rc= gnutls_ocsp_resp_print(resp, GNUTLS_OCSP_PRINT_COMPACT, &printed)) == 0
+ )
+ {
+ debug_printf("%.4096s", printed.data);
+ gnutls_free(printed.data);
+ }
+ else
+ (void) tls_error_gnu(state, US"ocsp decode", rc, errstr);
+ if (idx == 0 && rc)
+ (void) tls_error_gnu(state, US"ocsp decode", rc, errstr);
}
if (gnutls_ocsp_status_request_is_checked(state->session, 0) == 0)
{
- tls_out.ocsp = OCSP_FAILED;
- return tls_error(US"certificate status check failed", NULL, state->host, errstr);
+ tlsp->ocsp = OCSP_FAILED;
+ tls_error(US"certificate status check failed", NULL, state->host, errstr);
+ if (require_ocsp)
+ return FALSE;
+ }
+ else
+ {
+ DEBUG(D_tls) debug_printf("Passed OCSP checking\n");
+ tlsp->ocsp = OCSP_VFIED;
}
- DEBUG(D_tls) debug_printf("Passed OCSP checking\n");
- tls_out.ocsp = OCSP_VFIED;
}
#endif
-/* Figure out peer DN, and if authenticated, etc. */
+#ifdef EXIM_HAVE_TLS_RESUME
+tls_client_resume_posthandshake(state, tlsp, host);
+#endif
-if ((rc = peer_status(state, errstr)) != OK)
- return rc;
+#ifdef EXIM_HAVE_ALPN
+if (ob->tls_alpn) /* We requested. See what was negotiated. */
+ {
+ gnutls_datum_t p = {.size = 0};
+
+ if (gnutls_alpn_get_selected_protocol(state->session, &p) == 0)
+ { DEBUG(D_tls) debug_printf("ALPN negotiated: '%.*s'\n", (int)p.size, p.data); }
+ else if (verify_check_given_host(CUSS &ob->hosts_require_alpn, host) == OK)
+ {
+ gnutls_alert_send(state->session, GNUTLS_AL_FATAL, GNUTLS_A_NO_APPLICATION_PROTOCOL);
+ tls_error(US"handshake", US"ALPN required but not negotiated", state->host, errstr);
+ return FALSE;
+ }
+ else
+ DEBUG(D_tls) debug_printf("No ALPN negotiated");
+ }
+#endif
/* Sets various Exim expansion variables; may need to adjust for ACL callouts */
extract_exim_vars_from_tls_state(state);
-return OK;
+cctx->tls_ctx = state;
+return TRUE;
}
+/*
+Arguments:
+ ct_ctx client TLS context pointer, or NULL for the one global server context
+*/
+
+void
+tls_shutdown_wr(void * ct_ctx)
+{
+exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
+tls_support * tlsp = state->tlsp;
+
+if (!tlsp || tlsp->active.sock < 0) return; /* TLS was not active */
+
+tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
+
+HDEBUG(D_transport|D_tls|D_acl|D_v) debug_printf_indent(" SMTP(TLS shutdown)>>\n");
+gnutls_bye(state->session, GNUTLS_SHUT_WR);
+}
+
/*************************************************
* Close down a TLS session *
*************************************************/
would tamper with the TLS session in the parent process).
Arguments:
- shutdown 1 if TLS close-alert is to be sent,
- 2 if also response to be waited for
+ ct_ctx client context pointer, or NULL for the one global server context
+ do_shutdown 0 no data-flush or TLS close-alert
+ 1 if TLS close-alert is to be sent,
+ 2 if also response to be waited for (2s timeout)
Returns: nothing
*/
void
-tls_close(BOOL is_server, int shutdown)
+tls_close(void * ct_ctx, int do_shutdown)
{
-exim_gnutls_state_st *state = is_server ? &state_server : &state_client;
+exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
+tls_support * tlsp = state->tlsp;
-if (!state->tlsp || state->tlsp->active < 0) return; /* TLS was not active */
+if (!tlsp || tlsp->active.sock < 0) return; /* TLS was not active */
-if (shutdown)
+if (do_shutdown)
{
DEBUG(D_tls) debug_printf("tls_close(): shutting down TLS%s\n",
- shutdown > 1 ? " (with response-wait)" : "");
+ do_shutdown > TLS_SHUTDOWN_NOWAIT ? " (with response-wait)" : "");
- alarm(2);
- gnutls_bye(state->session, shutdown > 1 ? GNUTLS_SHUT_RDWR : GNUTLS_SHUT_WR);
- alarm(0);
- }
+ tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
-gnutls_deinit(state->session);
-gnutls_certificate_free_credentials(state->x509_cred);
+#ifdef EXIM_TCP_CORK
+ if (do_shutdown == TLS_SHUTDOWN_WAIT)
+ (void) setsockopt(tlsp->active.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &off, sizeof(off));
+#endif
+ /* The library seems to have no way to only wait for a peer's
+ shutdown, so handle the same as TLS_SHUTDOWN_WAIT */
-state->tlsp->active = -1;
-if (state->xfer_buffer) store_free(state->xfer_buffer);
-memcpy(state, &exim_gnutls_state_init, sizeof(exim_gnutls_state_init));
+ ALARM(2);
+ gnutls_bye(state->session,
+ do_shutdown > TLS_SHUTDOWN_NOWAIT ? GNUTLS_SHUT_RDWR : GNUTLS_SHUT_WR);
+ ALARM_CLR(0);
+ }
-if (!state_server.session && !state_client.session)
+if (!ct_ctx) /* server */
{
- gnutls_global_deinit();
- exim_gnutls_base_init_done = FALSE;
+ receive_getc = smtp_getc;
+ receive_getbuf = smtp_getbuf;
+ receive_get_cache = smtp_get_cache;
+ receive_hasc = smtp_hasc;
+ receive_ungetc = smtp_ungetc;
+ receive_feof = smtp_feof;
+ receive_ferror = smtp_ferror;
}
+
+gnutls_deinit(state->session);
+tlsp->active.sock = -1;
+tlsp->active.tls_ctx = NULL;
+/* Leave bits, peercert, cipher, peerdn, certificate_verified set, for logging */
+tlsp->channelbinding = NULL;
+
+
+if (state->xfer_buffer) store_free(state->xfer_buffer);
}
exim_gnutls_state_st * state = &state_server;
ssize_t inbytes;
-DEBUG(D_tls) debug_printf("Calling gnutls_record_recv(%p, %p, %u)\n",
+DEBUG(D_tls) debug_printf("Calling gnutls_record_recv(session=%p, buffer=%p, buffersize=%u)\n",
state->session, state->xfer_buffer, ssl_xfer_buffer_size);
sigalrm_seen = FALSE;
-if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
-inbytes = gnutls_record_recv(state->session, state->xfer_buffer,
- MIN(ssl_xfer_buffer_size, lim));
-alarm(0);
+if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
+
+errno = 0;
+do
+ inbytes = gnutls_record_recv(state->session, state->xfer_buffer,
+ MIN(ssl_xfer_buffer_size, lim));
+while (inbytes == GNUTLS_E_AGAIN);
+
+if (smtp_receive_timeout > 0) ALARM_CLR(0);
-/* Timeouts do not get this far; see command_timeout_handler().
- A zero-byte return appears to mean that the TLS session has been
- closed down, not that the socket itself has been closed down. Revert to
- non-TLS handling. */
+if (had_command_timeout) /* set by signal handler */
+ smtp_command_timeout_exit(); /* does not return */
+if (had_command_sigterm)
+ smtp_command_sigterm_exit();
+if (had_data_timeout)
+ smtp_data_timeout_exit();
+if (had_data_sigint)
+ smtp_data_sigint_exit();
+
+/* Timeouts do not get this far. A zero-byte return appears to mean that the
+TLS session has been closed down, not that the socket itself has been closed
+down. Revert to non-TLS handling. */
if (sigalrm_seen)
{
else if (inbytes == 0)
{
DEBUG(D_tls) debug_printf("Got TLS_EOF\n");
-
- receive_getc = smtp_getc;
- receive_getbuf = smtp_getbuf;
- receive_get_cache = smtp_get_cache;
- receive_ungetc = smtp_ungetc;
- receive_feof = smtp_feof;
- receive_ferror = smtp_ferror;
- receive_smtp_buffered = smtp_buffered;
-
- gnutls_deinit(state->session);
- gnutls_certificate_free_credentials(state->x509_cred);
-
- state->session = NULL;
- state->tlsp->active = -1;
- state->tlsp->bits = 0;
- state->tlsp->certificate_verified = FALSE;
- tls_channelbinding_b64 = NULL;
- state->tlsp->cipher = NULL;
- state->tlsp->peercert = NULL;
- state->tlsp->peerdn = NULL;
-
+ tls_close(NULL, TLS_NO_SHUTDOWN);
return FALSE;
}
else if (inbytes < 0)
{
+ DEBUG(D_tls) debug_printf("%s: err from gnutls_record_recv\n", __FUNCTION__);
record_io_error(state, (int) inbytes, US"recv", NULL);
state->xfer_error = TRUE;
return FALSE;
}
#ifndef DISABLE_DKIM
-dkim_exim_verify_feed(state->xfer_buffer, inbytes);
+smtp_verify_feed(state->xfer_buffer, inbytes);
#endif
state->xfer_buffer_hwm = (int) inbytes;
state->xfer_buffer_lwm = 0;
This feeds DKIM and should be used for all message-body reads.
-Arguments: lim Maximum amount to read/bufffer
+Arguments: lim Maximum amount to read/buffer
Returns: the next character or EOF
*/
return state->xfer_buffer[state->xfer_buffer_lwm++];
}
+BOOL
+tls_hasc(void)
+{
+exim_gnutls_state_st * state = &state_server;
+return state->xfer_buffer_lwm < state->xfer_buffer_hwm;
+}
+
uschar *
tls_getbuf(unsigned * len)
{
}
+/* Get up to the given number of bytes from any cached data, and feed to dkim. */
void
-tls_get_cache()
+tls_get_cache(unsigned lim)
{
#ifndef DISABLE_DKIM
exim_gnutls_state_st * state = &state_server;
int n = state->xfer_buffer_hwm - state->xfer_buffer_lwm;
+if (n > lim)
+ n = lim;
if (n > 0)
- dkim_exim_verify_feed(state->xfer_buffer+state->xfer_buffer_lwm, n);
+ smtp_verify_feed(state->xfer_buffer+state->xfer_buffer_lwm, n);
#endif
}
BOOL
-tls_could_read(void)
+tls_could_getc(void)
{
return state_server.xfer_buffer_lwm < state_server.xfer_buffer_hwm
|| gnutls_record_check_pending(state_server.session) > 0;
}
-
-
/*************************************************
* Read bytes from TLS channel *
*************************************************/
then the caller must feed DKIM.
Arguments:
+ ct_ctx client context pointer, or NULL for the one global server context
buff buffer of data
len size of buffer
Returns: the number of bytes read
- -1 after a failed read
+ -1 after a failed read, including EOF
*/
int
-tls_read(BOOL is_server, uschar *buff, size_t len)
+tls_read(void * ct_ctx, uschar *buff, size_t len)
{
-exim_gnutls_state_st *state = is_server ? &state_server : &state_client;
+exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
ssize_t inbytes;
if (len > INT_MAX)
state->xfer_buffer_hwm - state->xfer_buffer_lwm);
DEBUG(D_tls)
- debug_printf("Calling gnutls_record_recv(%p, %p, " SIZE_T_FMT ")\n",
+ debug_printf("Calling gnutls_record_recv(session=%p, buffer=%p, len=" SIZE_T_FMT ")\n",
state->session, buff, len);
-inbytes = gnutls_record_recv(state->session, buff, len);
+errno = 0;
+do
+ inbytes = gnutls_record_recv(state->session, buff, len);
+while (inbytes == GNUTLS_E_AGAIN);
+
if (inbytes > 0) return inbytes;
if (inbytes == 0)
{
DEBUG(D_tls) debug_printf("Got TLS_EOF\n");
}
-else record_io_error(state, (int)inbytes, US"recv", NULL);
+else
+ {
+ DEBUG(D_tls) debug_printf("%s: err from gnutls_record_recv\n", __FUNCTION__);
+ record_io_error(state, (int)inbytes, US"recv", NULL);
+ }
return -1;
}
/*
Arguments:
- is_server channel specifier
+ ct_ctx client context pointer, or NULL for the one global server context
buff buffer of data
len number of bytes
more more data expected soon
+Calling with len zero and more unset will flush buffered writes. The buff
+argument can be null for that case.
+
Returns: the number of bytes after a successful write,
-1 after a failed write
*/
int
-tls_write(BOOL is_server, const uschar *buff, size_t len, BOOL more)
+tls_write(void * ct_ctx, const uschar * buff, size_t len, BOOL more)
{
ssize_t outbytes;
size_t left = len;
-exim_gnutls_state_st *state = is_server ? &state_server : &state_client;
-#ifdef SUPPORT_CORK
-static BOOL corked = FALSE;
+exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
-if (more && !corked) gnutls_record_cork(state->session);
+#ifdef SUPPORT_CORK
+if (more && !state->corked)
+ {
+ DEBUG(D_tls) debug_printf("gnutls_record_cork(session=%p)\n", state->session);
+ gnutls_record_cork(state->session);
+ state->corked = TRUE;
+ }
#endif
DEBUG(D_tls) debug_printf("%s(%p, " SIZE_T_FMT "%s)\n", __FUNCTION__,
while (left > 0)
{
- DEBUG(D_tls) debug_printf("gnutls_record_send(SSL, %p, " SIZE_T_FMT ")\n",
- buff, left);
- outbytes = gnutls_record_send(state->session, buff, left);
+ DEBUG(D_tls) debug_printf("gnutls_record_send(session=%p, buffer=%p, left=" SIZE_T_FMT ")\n",
+ state->session, buff, left);
+
+ errno = 0;
+ do
+ outbytes = gnutls_record_send(state->session, buff, left);
+ while (outbytes == GNUTLS_E_AGAIN);
DEBUG(D_tls) debug_printf("outbytes=" SSIZE_T_FMT "\n", outbytes);
+
if (outbytes < 0)
{
- record_io_error(state, outbytes, US"send", NULL);
+#ifdef GNUTLS_E_PREMATURE_TERMINATION
+ if ( outbytes == GNUTLS_E_PREMATURE_TERMINATION && errno == ECONNRESET
+ && !ct_ctx && f.smtp_in_quit
+ )
+ { /* Outlook, dammit */
+ if (LOGGING(protocol_detail))
+ log_write(0, LOG_MAIN, "[%s] after QUIT, client reset TCP before"
+ " SMTP response and TLS close\n", sender_host_address);
+ else
+ DEBUG(D_tls) debug_printf("[%s] SSL_write: after QUIT,"
+ " client reset TCP before TLS close\n", sender_host_address);
+ }
+ else
+#endif
+ {
+ DEBUG(D_tls) debug_printf("%s: gnutls_record_send err\n", __FUNCTION__);
+ record_io_error(state, outbytes, US"send", NULL);
+ }
return -1;
}
if (outbytes == 0)
}
#ifdef SUPPORT_CORK
-if (more != corked)
+if (!more && state->corked)
{
- if (!more) (void) gnutls_record_uncork(state->session, 0);
- corked = more;
+ DEBUG(D_tls) debug_printf("gnutls_record_uncork(session=%p)\n", state->session);
+ do
+ /* We can't use GNUTLS_RECORD_WAIT here, as it retries on
+ GNUTLS_E_AGAIN || GNUTLS_E_INTR, which would break our timeout set by alarm().
+ The GNUTLS_E_AGAIN should not happen ever, as our sockets are blocking anyway.
+ But who knows. (That all relies on the fact that GNUTLS_E_INTR and GNUTLS_E_AGAIN
+ match the EINTR and EAGAIN errno values.) */
+ outbytes = gnutls_record_uncork(state->session, 0);
+ while (outbytes == GNUTLS_E_AGAIN);
+
+ if (outbytes < 0)
+ {
+ record_io_error(state, len, US"uncork", NULL);
+ return -1;
+ }
+
+ state->corked = FALSE;
}
#endif
{
unsigned int r;
int i, needed_len;
-uschar *p;
uschar smallbuf[sizeof(r)];
if (max <= 1)
needed_len = sizeof(r);
/* Don't take 8 times more entropy than needed if int is 8 octets and we were
- * asked for a number less than 10. */
+asked for a number less than 10. */
+
for (r = max, i = 0; r; ++i)
r >>= 1;
i = (i + 7) / 8;
i = gnutls_rnd(GNUTLS_RND_NONCE, smallbuf, needed_len);
if (i < 0)
{
- DEBUG(D_all) debug_printf("gnutls_rnd() failed, using fallback.\n");
+ DEBUG(D_all) debug_printf("gnutls_rnd() failed, using fallback\n");
return vaguely_random_number_fallback(max);
}
r = 0;
-for (p = smallbuf; needed_len; --needed_len, ++p)
- {
- r *= 256;
- r += *p;
- }
+for (uschar * p = smallbuf; needed_len; --needed_len, ++p)
+ r = r * 256 + *p;
/* We don't particularly care about weighted results; if someone wants
* smooth distribution and cares enough then they should submit a patch then. */
const char *errpos;
uschar * dummy_errstr;
-#define validate_check_rc(Label) do { \
+#ifdef GNUTLS_AUTO_GLOBAL_INIT
+# define validate_check_rc(Label) do { \
+ if (rc != GNUTLS_E_SUCCESS) { if (exim_gnutls_base_init_done) \
+ return string_sprintf("%s failed: %s", (Label), gnutls_strerror(rc)); } } while (0)
+# define return_deinit(Label) do { return (Label); } while (0)
+#else
+# define validate_check_rc(Label) do { \
if (rc != GNUTLS_E_SUCCESS) { if (exim_gnutls_base_init_done) gnutls_global_deinit(); \
- return string_sprintf("%s failed: %s", (Label), gnutls_strerror(rc)); } } while (0)
-#define return_deinit(Label) do { gnutls_global_deinit(); return (Label); } while (0)
+ return string_sprintf("%s failed: %s", (Label), gnutls_strerror(rc)); } } while (0)
+# define return_deinit(Label) do { gnutls_global_deinit(); return (Label); } while (0)
+#endif
if (exim_gnutls_base_init_done)
log_write(0, LOG_MAIN|LOG_PANIC,
"already initialised GnuTLS, Exim developer bug");
-#ifdef HAVE_GNUTLS_PKCS11
+#if defined(HAVE_GNUTLS_PKCS11) && !defined(GNUTLS_AUTO_PKCS11_MANUAL)
if (!gnutls_allow_auto_pkcs11)
{
rc = gnutls_pkcs11_init(GNUTLS_PKCS11_FLAG_MANUAL, NULL);
validate_check_rc(US"gnutls_pkcs11_init");
}
#endif
+#ifndef GNUTLS_AUTO_GLOBAL_INIT
rc = gnutls_global_init();
validate_check_rc(US"gnutls_global_init()");
+#endif
exim_gnutls_base_init_done = TRUE;
if (!(tls_require_ciphers && *tls_require_ciphers))
rc = gnutls_priority_init(&priority_cache, CS expciphers, &errpos);
validate_check_rc(string_sprintf(
"gnutls_priority_init(%s) failed at offset %ld, \"%.8s..\"",
- expciphers, errpos - CS expciphers, errpos));
+ expciphers, (long)(errpos - CS expciphers), errpos));
#undef return_deinit
#undef validate_check_rc
+#ifndef GNUTLS_AUTO_GLOBAL_INIT
gnutls_global_deinit();
+#endif
return NULL;
}
+/* For ATRN provider: transfer the tls_in context to tls_out */
+
+void
+tls_state_in_to_out(int newfd, const uschar * ipaddr, int port)
+{
+exim_gnutls_state_st * state;
+host_item * h;
+int old_pool = store_pool;
+
+store_pool = POOL_PERM;
+state = store_get(sizeof(exim_gnutls_state_st), GET_UNTAINTED);
+h = store_get(sizeof(host_item), GET_UNTAINTED);
+
+memset(h, 0, sizeof(host_item));
+h->name = h->address = string_copy(ipaddr);
+h->port = port;
+
+*state = state_server;
+
+state->fd_in = newfd;
+state->fd_out = newfd;
+state->tlsp = &tls_out;
+state->host = h;
+
+tls_out = tls_in;
+tls_out.active.sock = newfd;
+tls_out.active.tls_ctx = state;
+
+memset(&tls_in, 0, sizeof(tls_in));
+
+gnutls_transport_set_ptr2(state->session,
+ (gnutls_transport_ptr_t)(long) newfd,
+ (gnutls_transport_ptr_t)(long) newfd);
+store_pool = old_pool;
+}
+
+
+
+/* For ATRN customer: transfer the tls_out context to tls_in */
+
+void
+tls_state_out_to_in(int newfd, const uschar * ipaddr, int port)
+{
+host_item * h;
+int old_pool = store_pool;
+
+store_pool = POOL_PERM;
+h = store_get(sizeof(host_item), GET_UNTAINTED);
+store_pool = old_pool;
+memset(h, 0, sizeof(host_item));
+h->name = h->address = string_copy(ipaddr);
+h->port = port;
+
+state_server = *(exim_gnutls_state_st *)tls_out.active.tls_ctx;
+state_server.fd_in = newfd;
+state_server.fd_out = newfd;
+state_server.tlsp = &tls_in;
+state_server.host = h;
+state_server.xfer_buffer = store_malloc(ssl_xfer_buffer_size);
+
+tls_in = tls_out;
+tls_in.on_connect = FALSE;
+tls_in.active.sock = newfd;
+tls_in.active.tls_ctx = &state_server;
+
+memset(&tls_out, 0, sizeof(tls_out));
+
+gnutls_transport_set_ptr2(state_server.session,
+ (gnutls_transport_ptr_t)(long) newfd,
+ (gnutls_transport_ptr_t)(long) newfd);
+}
+
+
/*************************************************
/* See a description in tls-openssl.c for an explanation of why this exists.
-Arguments: a FILE* to print the results to
-Returns: nothing
+Arguments: string to append to
+Returns: string
*/
-void
-tls_version_report(FILE *f)
+gstring *
+tls_version_report(gstring * g)
{
-fprintf(f, "Library version: GnuTLS: Compile: %s\n"
- " Runtime: %s\n",
- LIBGNUTLS_VERSION,
- gnutls_check_version(NULL));
+return string_fmt_append(g,
+ "Library version: GnuTLS: Compile: %s\n"
+ " Runtime: %s\n",
+ LIBGNUTLS_VERSION,
+ gnutls_check_version(NULL));
}
+#endif /*!MACRO_PREDEF*/
/* vi: aw ai sw=2
*/
/* End of tls-gnu.c */
git://git.exim.org / exim.git / blobdiff