Exim version x.yz ....
+Hints DB:
configuration file is TESTSUITE/test-config
trusted user
admin user
host in helo_try_verify_hosts? no (option unset)
host in helo_accept_junk_hosts? no (option unset)
using ACL "connect"
-processing "deny" (TESTSUITE/test-config 52)
+processing ACL connect "deny" (TESTSUITE/test-config 52)
check hosts = : 10.9.8.7
host in ": 10.9.8.7"?
list element:
list element: 10.9.8.7
host in ": 10.9.8.7"? no (end of list)
-deny: condition test failed in ACL "connect"
-processing "drop" (TESTSUITE/test-config 53)
+deny: condition test failed in ACL connect
+processing ACL connect "drop" (TESTSUITE/test-config 53)
l_message: forcibly dropped
check hosts = 10.9.8.9
host in "10.9.8.9"?
list element: 10.9.8.9
host in "10.9.8.9"? no (end of list)
-drop: condition test failed in ACL "connect"
-processing "accept" (TESTSUITE/test-config 55)
+drop: condition test failed in ACL connect
+processing ACL connect "accept" (TESTSUITE/test-config 55)
check logwrite = $sender_host_address accepted by connect ACL
= 10.9.8.8 accepted by connect ACL
LOG: MAIN
10.9.8.8 accepted by connect ACL
-accept: condition test succeeded in ACL "connect"
-end of ACL "connect": ACCEPT
-host in pipelining_connect_advertise_hosts?
- list element:
+accept: condition test succeeded in ACL connect
+end of ACL connect: ACCEPT
host in hosts_require_helo?
list element:
host in hosts_require_helo? no (end of list)
using ACL "mail"
-processing "warn" (TESTSUITE/test-config 63)
+processing ACL mail "warn" (TESTSUITE/test-config 63)
message: added header line
check senders = ok@test3
bad@test1 in "ok@test3"?
list element: ok@test3
address match test: subject=bad@test1 pattern=ok@test3
bad@test1 in "ok@test3"? no (end of list)
-warn: condition test failed in ACL "mail"
-processing "accept" (TESTSUITE/test-config 65)
+warn: condition test failed in ACL mail
+processing ACL mail "accept" (TESTSUITE/test-config 65)
check senders = ok@test1 : ok@test3
bad@test1 in "ok@test1 : ok@test3"?
list element: ok@test1
list element: ok@test3
address match test: subject=bad@test1 pattern=ok@test3
bad@test1 in "ok@test1 : ok@test3"? no (end of list)
-accept: condition test failed in ACL "mail"
-end of ACL "mail": implicit DENY
+accept: condition test failed in ACL mail
+end of ACL mail: implicit DENY
LOG: MAIN REJECT
H=[10.9.8.8] U=CALLER rejected MAIL <bad@test1>
host in hosts_require_helo?
list element:
host in hosts_require_helo? no (end of list)
using ACL "mail"
-processing "warn" (TESTSUITE/test-config 63)
+processing ACL mail "warn" (TESTSUITE/test-config 63)
message: added header line
check senders = ok@test3
ok@test1 in "ok@test3"?
list element: test3
test1 in "test3"? no (end of list)
ok@test1 in "ok@test3"? no (end of list)
-warn: condition test failed in ACL "mail"
-processing "accept" (TESTSUITE/test-config 65)
+warn: condition test failed in ACL mail
+processing ACL mail "accept" (TESTSUITE/test-config 65)
check senders = ok@test1 : ok@test3
ok@test1 in "ok@test1 : ok@test3"?
list element: ok@test1
test1 in "test1"? yes (matched "test1")
ok@test1 in "ok@test1 : ok@test3"? yes (matched "ok@test1")
check verify = sender
-ok in "!bad"?
+ok in local_parts?
list element: !bad
-ok in "!bad"? yes (end of list)
+ok in local_parts? yes (end of list)
----------- end verify ------------
sender ok@test1 verified ok
check logwrite = :main,reject: mail accepted "$smtp_command" "$smtp_command_argument"
= :main,reject: mail accepted "mail from:<ok@test1>" "<ok@test1>"
LOG: MAIN REJECT
mail accepted "mail from:<ok@test1>" "<ok@test1>"
-accept: condition test succeeded in ACL "mail"
-end of ACL "mail": ACCEPT
+accept: condition test succeeded in ACL mail
+end of ACL mail: ACCEPT
using ACL "rcpt"
-processing "accept" (TESTSUITE/test-config 70)
+processing ACL rcpt "accept" (TESTSUITE/test-config 70)
check senders = +ok_senders
ok@test1 in "+ok_senders"?
list element: +ok_senders
= :panic: rcpt accepted C=MAIL,MAIL,RCPT
LOG: PANIC
rcpt accepted C=MAIL,MAIL,RCPT
-accept: condition test succeeded in ACL "rcpt"
-end of ACL "rcpt": ACCEPT
+accept: condition test succeeded in ACL rcpt
+end of ACL rcpt: ACCEPT
using ACL "rcpt"
-processing "accept" (TESTSUITE/test-config 70)
+processing ACL rcpt "accept" (TESTSUITE/test-config 70)
check senders = +ok_senders
ok@test1 in "+ok_senders"?
list element: +ok_senders
= :panic: rcpt accepted C=MAIL,MAIL,RCPT,RCPT
LOG: PANIC
rcpt accepted C=MAIL,MAIL,RCPT,RCPT
-accept: condition test succeeded in ACL "rcpt"
-end of ACL "rcpt": ACCEPT
+accept: condition test succeeded in ACL rcpt
+end of ACL rcpt: ACCEPT
LOG: smtp_connection MAIN
- SMTP connection from CALLER closed by QUIT
+ SMTP connection from CALLER D=qqs closed by QUIT
>>>>>>>>>>>>>>>> Exim pid=p1234 (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
1999-03-02 09:44:33 ACL "warn" with "message" setting found in a non-message (EHLO or HELO) ACL: cannot specify header lines here: message ignored
Exim version x.yz ....
+Hints DB:
configuration file is TESTSUITE/test-config
trusted user
admin user
host in helo_try_verify_hosts? no (option unset)
host in helo_accept_junk_hosts? no (option unset)
using ACL "connect"
-processing "deny" (TESTSUITE/test-config 52)
+processing ACL connect "deny" (TESTSUITE/test-config 52)
check hosts = : 10.9.8.7
host in ": 10.9.8.7"?
list element:
list element: 10.9.8.7
host in ": 10.9.8.7"? no (end of list)
-deny: condition test failed in ACL "connect"
-processing "drop" (TESTSUITE/test-config 53)
+deny: condition test failed in ACL connect
+processing ACL connect "drop" (TESTSUITE/test-config 53)
l_message: forcibly dropped
check hosts = 10.9.8.9
host in "10.9.8.9"?
list element: 10.9.8.9
host in "10.9.8.9"? no (end of list)
-drop: condition test failed in ACL "connect"
-processing "accept" (TESTSUITE/test-config 55)
+drop: condition test failed in ACL connect
+processing ACL connect "accept" (TESTSUITE/test-config 55)
check logwrite = $sender_host_address accepted by connect ACL
= 10.9.8.8 accepted by connect ACL
LOG: MAIN
10.9.8.8 accepted by connect ACL
-accept: condition test succeeded in ACL "connect"
-end of ACL "connect": ACCEPT
-host in pipelining_connect_advertise_hosts?
- list element:
+accept: condition test succeeded in ACL connect
+end of ACL connect: ACCEPT
host in hosts_require_helo?
list element:
host in hosts_require_helo? no (end of list)
using ACL "mail"
-processing "warn" (TESTSUITE/test-config 63)
+processing ACL mail "warn" (TESTSUITE/test-config 63)
message: added header line
check senders = ok@test3
ok@test3 in "ok@test3"?
list element: test3
test3 in "test3"? yes (matched "test3")
ok@test3 in "ok@test3"? yes (matched "ok@test3")
-warn: condition test succeeded in ACL "mail"
-processing "accept" (TESTSUITE/test-config 65)
+warn: condition test succeeded in ACL mail
+processing ACL mail "accept" (TESTSUITE/test-config 65)
check senders = ok@test1 : ok@test3
ok@test3 in "ok@test1 : ok@test3"?
list element: ok@test1
test3 in "test3"? yes (matched "test3")
ok@test3 in "ok@test1 : ok@test3"? yes (matched "ok@test3")
check verify = sender
-ok in "!bad"?
+ok in local_parts?
list element: !bad
-ok in "!bad"? yes (end of list)
+ok in local_parts? yes (end of list)
----------- end verify ------------
sender ok@test3 verified ok
check logwrite = :main,reject: mail accepted "$smtp_command" "$smtp_command_argument"
= :main,reject: mail accepted "mail from:<ok@test3>" "<ok@test3>"
LOG: MAIN REJECT
mail accepted "mail from:<ok@test3>" "<ok@test3>"
-accept: condition test succeeded in ACL "mail"
-end of ACL "mail": ACCEPT
+accept: condition test succeeded in ACL mail
+end of ACL mail: ACCEPT
using ACL "rcpt"
-processing "accept" (TESTSUITE/test-config 70)
+processing ACL rcpt "accept" (TESTSUITE/test-config 70)
check senders = +ok_senders
ok@test3 in "+ok_senders"?
list element: +ok_senders
= :panic: rcpt accepted C=MAIL,RCPT
LOG: PANIC
rcpt accepted C=MAIL,RCPT
-accept: condition test succeeded in ACL "rcpt"
-end of ACL "rcpt": ACCEPT
+accept: condition test succeeded in ACL rcpt
+end of ACL rcpt: ACCEPT
>>Headers added by MAIL or RCPT ACL:
X-ACL-Warn: added header line
>>
LOG: MAIN
<= ok@test3 H=[10.9.8.8] U=CALLER P=smtp S=sss
Exim version x.yz ....
+Hints DB:
configuration file is TESTSUITE/test-config
trusted user
admin user
dropping to exim gid; retaining priv uid
-x in "!bad"?
+x in local_parts?
list element: !bad
-x in "!bad"? yes (end of list)
+x in local_parts? yes (end of list)
+>>>>>>>>>>>>>>>> Exim pid=p1237 (delivery-local) terminating with rc=0 >>>>>>>>>>>>>>>>
LOG: MAIN
=> x <x@y> R=accept T=appendfile
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=p1236 (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
LOG: smtp_connection MAIN
- SMTP connection from CALLER closed by QUIT
+ SMTP connection from CALLER D=qqs closed by QUIT
>>>>>>>>>>>>>>>> Exim pid=p1235 (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
1999-03-02 09:44:33 ACL "warn" with "message" setting found in a non-message (EHLO or HELO) ACL: cannot specify header lines here: message ignored
1999-03-02 09:44:33 rcpt accepted C=EHLO,MAIL,RCPT
-1999-03-02 09:44:33 10HmaX-0005vi-00 10HmaX-0005vi-00 no recipients found in headers
+1999-03-02 09:44:33 10HmaX-000000005vi-0000 no recipients found in headers