options, and new features, see the NewStuff file next to this ChangeLog.
-Since Exim version 4.90
------------------------
+Exim version 4.92
+-----------------
+
+JH/01 Remove code calling the customisable local_scan function, unless a new
+ definition "HAVE_LOCAL_SCAN=yes" is present in the Local/Makefile.
+
+JH/02 Bug 1007: Avoid doing logging from signal-handlers, as that can result in
+ non-signal-safe functions being used.
+
+JH/03 Bug 2269: When presented with a received message having a stupidly large
+ number of DKIM-Signature headers, disable DKIM verification to avoid
+ a resource-consumption attack. The limit is set at twenty.
+
+JH/04 Add variables $arc_domains, $arc_oldest_pass for ARC verify. Fix the
+ report of oldest_pass in ${authres } in consequence, and separate out
+ some descriptions of reasons for verification fail.
+
+JH/05 Bug 2273: Cutthrough delivery left a window where the received messsage
+ files in the spool were present and unlocked. A queue-runner could spot
+ them, resulting in a duplicate delivery. Fix that by doing the unlock
+ after the unlink. Investigation by Tim Stewart. Take the opportunity to
+ add more error-checking on spoolfile handling while that code is being
+ messed with.
+
+PP/01 Refuse to open a spool data file (*-D) if it's a symlink.
+ No known attacks, no CVE, this is defensive hardening.
+
+JH/06 Bug 2275: The MIME ACL unlocked the received message files early, and
+ a queue-runner could start a delivery while other operations were ongoing.
+ Cutthrough delivery was a common victim, resulting in duplicate delivery.
+ Found and investigated by Tim Stewart. Fix by using the open message data
+ file handle rather than opening another, and not locally closing it (which
+ releases a lock) for that case, while creating the temporary .eml format
+ file for the MIME ACL. Also applies to "regex" and "spam" ACL conditions.
+
+JH/07 Bug 177: Make a random-recipient callout success visible in ACL, by setting
+ $sender_verify_failure/$recipient_verify_failure to "random".
+
+JH/08 When generating a selfsigned cert, use serial number 1 since zero is not
+ legitimate.
+
+JH/09 Bug 2274: Fix logging of cmdline args when starting in an unlinked cwd.
+ Previously this would segfault.
+
+JH/10 Fix ARC signing for case when DKIM signing failed. Previously this would
+ segfault.
+
+JH/11 Bug 2264: Exim now only follows CNAME chains one step by default. We'd
+ like zero, since the resolver should be doing this for us, But we need one
+ as a CNAME but no MX presence gets the CNAME returned; we need to check
+ that doesn't point to an MX to declare it "no MX returned" rather than
+ "error, loop". A new main option is added so the older capability of
+ following some limited number of chain links is maintained.
+
+JH/12 Add client-ip info to non-pass iprev ${authres } lines.
+
+JH/13 For receent Openssl versions (1.1 onward) use modern generic protocol
+ methods. These should support TLS 1.3; they arrived with TLS 1.3 and the
+ now-deprecated earlier definitions used only specified the range up to TLS
+ 1.2 (in the older-version library docs).
+
+JH/14 Bug 2284: Fix DKIM signing for body lines starting with a pair of dots.
+
+JH/15 Rework TLS client-side context management. Stop using a global, and
+ explicitly pass a context around. This enables future use of TLS for
+ connections to service-daemons (eg. malware scanning) while a client smtp
+ connection is using TLS; with cutthrough connections this is quite likely.
+
+JH/16 Fix ARC verification to do AS checks in reverse order.
+
+JH/17 Support a "tls" option on the ${readsocket } expansion item.
+
+
+Exim version 4.91
+-----------------
GF/01 DEFER rather than ERROR on redis cluster MOVED response.
- When redis_servers is set to a list of > 1 element, and the Redis servers
- in that list are in cluster configuration, convert the REDIS_REPLY_ERROR
- case of MOVED into a DEFER case instead, thus moving the query onto the
- next server in the list. For a cluster of N elements, all N servers must
- be defined in redis_servers.
+ When redis_servers is set to a list of > 1 element, and the Redis servers
+ in that list are in cluster configuration, convert the REDIS_REPLY_ERROR
+ case of MOVED into a DEFER case instead, thus moving the query onto the
+ next server in the list. For a cluster of N elements, all N servers must
+ be defined in redis_servers.
+
+GF/02 Catch and remove uninitialized value warning in exiqsumm
+ Check for existence of @ARGV before looking at $ARGV[0]
JH/01 Replace the store_release() internal interface with store_newblock(),
which internalises the check required to safely use the old one, plus
dead before release of memory in the daemon loop. This stops complaints
about them when the debug_store option is enabled. Discovered specifically
for sender_rate_period, but applies to a whole set of variables.
- Do the same for the queue-runner loop, for variables set from spool
- message files. Do the same for the SMTP per-message loop, for certain
- variables indirectly set in ACL operations.
+ Do the same for the queue-runner and queue-list loops, for variables set
+ from spool message files. Do the same for the SMTP per-message loop, for
+ certain variables indirectly set in ACL operations.
+
+JH/29 Bug 2250: Fix a longstanding bug in heavily-pipelined SMTP input (such
+ as a multi-recipient message from a mailinglist manager). The coding had
+ an arbitrary cutoff number of characters while checking for more input;
+ enforced by writing a NUL into the buffer. This corrupted long / fast
+ input. The problem was exposed more widely when more pipelineing of SMTP
+ responses was introduced, and one Exim system was feeding another.
+ The symptom is log complaints of SMTP syntax error (NUL chars) on the
+ receiving system, and refused recipients seen by the sending system
+ (propating to people being dropped from mailing lists).
+ Discovered and pinpointed by David Carter.
+
+JH/30 The (EXPERIMENTAL_DMARC) variable $dmarc_ar_header is withdrawn, being
+ replaced by the ${authresults } expansion.
+
+JH/31 Bug 2257: Fix pipe transport to not use a socket-only syscall.
+
+HS/03 Set a handler for SIGTERM and call exit(3) if running as PID 1. This
+ allows proper process termination in container environments.
+
+JH/32 Bug 2258: Fix spool_wireformat in combination with LMTP transport.
+ Previously the "final dot" had a newline after it; ensure it is CR,LF.
+
+JH/33 SPF: remove support for the "spf" ACL condition outcome values "err_temp"
+ and "err_perm", deprecated since 4.83 when the RFC-defined words
+ "temperror" and "permerror" were introduced.
+
+JH/34 Re-introduce enforcement of no cutthrough delivery on transports having
+ transport-filters or DKIM-signing. The restriction was lost in the
+ consolidation of verify-callout and delivery SMTP handling.
+ Extend the restriction to also cover ARC-signing.
+
+JH/35 Cutthrough: for a final-dot response timeout (and nonunderstood responses)
+ in defer=pass mode supply a 450 to the initiator. Previously the message
+ would be spooled.
+
+PP/02 DANE: add dane_require_tls_ciphers SMTP Transport option; if unset,
+ tls_require_ciphers is used as before.
+
+HS/03 Malware Avast: Better match the Avast multiline protocol. Add
+ "pass_unscanned". Only tmpfails from the scanner are written to
+ the paniclog, as they may require admin intervention (permission
+ denied, license issues). Other scanner errors (like decompression
+ bombs) do not cause a paniclog entry.
+
+JH/36 Fix reinitialisation of DKIM logging variable between messages.
+ Previously it was possible to log spurious information in receive log
+ lines.
+
+JH/37 Bug 2255: Revert the disable of the OpenSSL session caching. This
+ triggered odd behaviour from Outlook Express clients.
+
+PP/03 Add util/renew-opendmarc-tlds.sh script for safe renewal of public
+ suffix list.
+
+JH/38 DKIM: accept Ed25519 pubkeys in SubjectPublicKeyInfo-wrapped form,
+ since the IETF WG has not yet settled on that versus the original
+ "bare" representation.
+
+JH/39 Fix syslog logging for syslog_timestamp=no and log_selector +millisec.
+ Previously the millisecond value corrupted the output.
+ Fix also for syslog_pid=no and log_selector +pid, for which the pid
+ corrupted the output.
Exim version 4.90